Add binding documentation for CRIS

Only includes the devboard 88 (CRISv32) at the moment.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

3 files changed, 40 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/cris/axis.txt b/Documentation/devicetree/bindings/cris/axis.txt
new file mode 100644
index 000000000000..d209ca2a47c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/cris/axis.txt
@@ -0,0 +1,9 @@
+Axis Communications AB
+ARTPEC series SoC Device Tree Bindings
+
+
+CRISv32 based SoCs are ETRAX FS and ARTPEC-3:
+
+    - compatible = "axis,crisv32";
+
+
diff --git a/Documentation/devicetree/bindings/cris/boards.txt b/Documentation/devicetree/bindings/cris/boards.txt
new file mode 100644
index 000000000000..533dd273ccf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/cris/boards.txt
@@ -0,0 +1,8 @@
+Boards based on the CRIS SoCs:
+
+Required root node properties:
+    - compatible = should be one or more of the following:
+        - "axis,dev88"  - for Axis devboard 88 with ETRAX FS
+
+Optional:
+
diff --git a/Documentation/devicetree/bindings/cris/interrupts.txt b/Documentation/devicetree/bindings/cris/interrupts.txt
new file mode 100644
index 000000000000..e8b123b0a5e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/cris/interrupts.txt
@@ -0,0 +1,23 @@
+* CRISv32 Interrupt Controller
+
+Interrupt controller for the CRISv32 SoCs.
+
+Main node required properties:
+
+- compatible : should be:
+        "axis,crisv32-intc"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The type shall be a <u32> and the value shall be 1.
+- reg: physical base address and size of the intc registers map.
+
+Example:
+
+        intc: interrupt-controller {
+                compatible = "axis,crisv32-intc";
+                reg = <0xb001c000 0x1000>;
+                interrupt-controller;
+                #interrupt-cells = <1>;
+        };
+
+