ARM: mmp: add more compatible names in gpio driver

Since more driver names are added into platform id, do the same thing on
compatible names for DT mode.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 5 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index e13787498bcf..9b3f1d4a88d6 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -1,7 +1,10 @@
 * Marvell PXA GPIO controller
 
 Required properties:
-- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
+- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
+                "intel,pxa27x-gpio", "intel,pxa3xx-gpio",
+                "marvell,pxa93x-gpio", "marvell,mmp-gpio" or
+                "marvell,mmp2-gpio".
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all gpio pins.
   There're three gpio interrupts in arch-pxa, and they're gpio0,
@@ -18,7 +21,7 @@ Required properties:
 Example:
 
         gpio: gpio@d4019000 {
-                compatible = "mrvl,mmp-gpio";
+                compatible = "marvell,mmp-gpio";
                 reg = <0xd4019000 0x1000>;
                 interrupts = <49>;
                 interrupt-name = "gpio_mux";