regulator: palmas-pmic: doc: remove ti,tstep

commit 28d1e8cd671a53d6b4f967abbbc2a55f7bd333f6
(regulator: palma: add ramp delay support through regulator constraints)

Removed the regulator's ti,step option from driver without updating the
documentation.

So, remove from documentation and example as well.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 0 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index 04d67f092383..30b0581bb1ce 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -33,7 +33,6 @@ Optional nodes:
                ti,roof-floor - control voltage selection by pin(boolean)
                ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
                2 - eco, 3 - forced pwm
-               ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
                ti,smps-range - OTP has the wrong range set for the hardware so override
                0 - low range, 1 - high range.
 
@@ -59,7 +58,6 @@ pmic {
                         ti,warm-reset;
                         ti,roof-floor;
                         ti,mode-sleep = <0>;
-                        ti,tstep = <0>;
                         ti,smps-range = <1>;
                 };