Merge tag 'nfc-next-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

NFC: 3.20 first pull request

This is the first NFC pull request for 3.20.

With this one we have:

- Secure element support for the ST Micro st21nfca driver. This depends
  on a few HCI internal changes in order for example to support more
  than one secure element per controller.

- ACPI support for NXP's pn544 HCI driver. This controller is found on
  many x86 SoCs and is typically enumerated on the ACPI bus there.

- A few st21nfca and st21nfcb fixes.

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 11 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index e4faa2e8dfeb..7bb2e213d6f9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@
 * STMicroelectronics SAS. ST21NFCA NFC Controller
 
 Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
 - clock-frequency: I²C work frequency.
 - reg: address on the bus
 - interrupt-parent: phandle for the interrupt gpio controller
@@ -11,6 +11,10 @@ Required properties:
 Optional SoC Specific Properties:
 - pinctrl-names: Contains only one value - "default".
 - pintctrl-0: Specifies the pin control groups used for this controller.
+- ese-present: Specifies that an ese is physically connected to the nfc
+controller.
+- uicc-present: Specifies that the uicc swp signal can be physically
+connected to the nfc controller.
 
 Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
@@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
         st21nfca: st21nfca@1 {
 
-                compatible = "st,st21nfca_i2c";
+                compatible = "st,st21nfca-i2c";
 
                 reg = <0x01>;
                 clock-frequency = <400000>;
@@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 
                 enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+                ese-present;
+                uicc-present;
         };
 };
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
index 9005608cbbd1..bb237072dbe9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -1,7 +1,7 @@
 * STMicroelectronics SAS. ST21NFCB NFC Controller
 
 Required properties:
-- compatible: Should be "st,st21nfcb_i2c".
+- compatible: Should be "st,st21nfcb-i2c".
 - clock-frequency: I²C work frequency.
 - reg: address on the bus
 - interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
 
         st21nfcb: st21nfcb@8 {
 
-                compatible = "st,st21nfcb_i2c";
+                compatible = "st,st21nfcb-i2c";
 
                 reg = <0x08>;
                 clock-frequency = <400000>;