dt: Move device tree documentation out of powerpc directory

The device tree is used by more than just PowerPC.  Make the documentation
directory available to all.

v2: reorganized files while moving to create arch and driver specific
    directories.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

1 files changed, 53 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
new file mode 100644
index 000000000000..2fa4fcd38fd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/mpc5xxx-mscan.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+                           are: "ip" for ip bus clock
+                                 "ref" for reference clock (XTAL)
+                           "ref" is default in case this property is not
+                           present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+                           are: "ip" for ip bus clock
+                                "ref" for reference clock
+                                "sys" for system clock
+                           If this property is not present, an optimal CAN
+                           clock source and frequency based on the system
+                           clock will be selected. If this is not possible,
+                           the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+                           clock divider can be specified. By default, a
+                           value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+        can@1300 {
+                compatible = "fsl,mpc5121-mscan";
+                interrupts = <12 0x8>;
+                interrupt-parent = <&ipic>;
+                reg = <0x1300 0x80>;
+        };
+
+        can@1380 {
+                compatible = "fsl,mpc5121-mscan";
+                interrupts = <13 0x8>;
+                interrupt-parent = <&ipic>;
+                reg = <0x1380 0x80>;
+                fsl,mscan-clock-source = "ref";
+                fsl,mscan-clock-divider = <3>;
+        };