Create/use more directory structure in the Documentation/ tree.

Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

1 files changed, 0 insertions, 93 deletions

diff --git a/Documentation/cpqarray.txt b/Documentation/cpqarray.txt
deleted file mode 100644
index c7154e20ef5e..000000000000
--- a/Documentation/cpqarray.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-This driver is for Compaq's SMART2 Intelligent Disk Array Controllers.
-
-Supported Cards:
-----------------
-
-This driver is known to work with the following cards:
-
-        * SMART (EISA)
-        * SMART-2/E (EISA)
-        * SMART-2/P
-        * SMART-2DH
-        * SMART-2SL
-        * SMART-221
-        * SMART-3100ES
-        * SMART-3200
-        * Integrated Smart Array Controller
-        * SA 4200
-        * SA 4250ES
-        * SA 431
-        * RAID LC2 Controller
-
-It should also work with some really old Disk array adapters, but I am
-unable to test against these cards:
-
-        * IDA
-        * IDA-2
-        * IAES
-
-
-EISA Controllers:
------------------
-
-If you want to use an EISA controller you'll have to supply some
-modprobe/lilo parameters.  If the driver is compiled into the kernel, must
-give it the controller's IO port address at boot time (it is not
-necessary to specify the IRQ).  For example, if you had two SMART-2/E
-controllers, in EISA slots 1 and 2 you'd give it a boot argument like
-this:
-
-        smart2=0x1000,0x2000
-
-If you were loading the driver as a module, you'd give load it like this:
-
-        modprobe cpqarray eisa=0x1000,0x2000
-
-You can use EISA and PCI adapters at the same time.
-
-
-Device Naming:
---------------
-
-You need some entries in /dev for the ida device.  MAKEDEV in the /dev
-directory can make device nodes for you automatically.  The device setup is
-as follows:
-
-Major numbers:
-        72      ida0
-        73      ida1
-        74      ida2
-        75      ida3
-        76      ida4
-        77      ida5
-        78      ida6
-        79      ida7
-
-Minor numbers:
-        b7 b6 b5 b4 b3 b2 b1 b0
-        |----+----| |----+----|
-             |           |
-             |           +-------- Partition ID (0=wholedev, 1-15 partition)
-             |
-             +-------------------- Logical Volume number
-
-The device naming scheme is:
-/dev/ida/c0d0           Controller 0, disk 0, whole device
-/dev/ida/c0d0p1         Controller 0, disk 0, partition 1
-/dev/ida/c0d0p2         Controller 0, disk 0, partition 2
-/dev/ida/c0d0p3         Controller 0, disk 0, partition 3
-
-/dev/ida/c1d1           Controller 1, disk 1, whole device
-/dev/ida/c1d1p1         Controller 1, disk 1, partition 1
-/dev/ida/c1d1p2         Controller 1, disk 1, partition 2
-/dev/ida/c1d1p3         Controller 1, disk 1, partition 3
-
-
-Changelog:
-==========
-
-10-28-2004 :    General cleanup, syntax fixes for in-kernel driver version.
-                James Nelson <james4765@gmail.com>
-
-
-1999 :          Original Document