aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/cdrom/cm206
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 18:20:36 -0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/cdrom/cm206
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/cdrom/cm206')
-rw-r--r--Documentation/cdrom/cm206185
1 files changed, 185 insertions, 0 deletions
diff --git a/Documentation/cdrom/cm206 b/Documentation/cdrom/cm206
new file mode 100644
index 000000000000..810368f4f7c4
--- /dev/null
+++ b/Documentation/cdrom/cm206
@@ -0,0 +1,185 @@
1This is the readme file for the driver for the Philips/LMS cdrom drive
2cm206 in combination with the cm260 host adapter card.
3
4 (c) 1995 David A. van Leeuwen
5
6Changes since version 0.99
7--------------------------
8- Interfacing to the kernel is routed though an extra interface layer,
9 cdrom.c. This allows runtime-configurable `behavior' of the cdrom-drive,
10 independent of the driver.
11
12Features since version 0.33
13---------------------------
14- Full audio support, that is, both workman, workbone and cdp work
15 now reasonably. Reading TOC still takes some time. xmcd has been
16 reported to run successfully.
17- Made auto-probe code a little better, I hope
18
19Features since version 0.28
20---------------------------
21- Full speed transfer rate (300 kB/s).
22- Minimum kernel memory usage for buffering (less than 3 kB).
23- Multisession support.
24- Tray locking.
25- Statistics of driver accessible to the user.
26- Module support.
27- Auto-probing of adapter card's base port and irq line,
28 also configurable at boot time or module load time.
29
30
31Decide how you are going to use the driver. There are two
32options:
33
34 (a) installing the driver as a resident part of the kernel
35 (b) compiling the driver as a loadable module
36
37 Further, you must decide if you are going to specify the base port
38 address and the interrupt request line of the adapter card cm260 as
39 boot options for (a), module parameters for (b), use automatic
40 probing of these values, or hard-wire your adaptor card's settings
41 into the source code. If you don't care, you can choose
42 autoprobing, which is the default. In that case you can move on to
43 the next step.
44
45Compiling the kernel
46--------------------
471) move to /usr/src/linux and do a
48
49 make config
50
51 If you have chosen option (a), answer yes to CONFIG_CM206 and
52 CONFIG_ISO9660_FS.
53
54 If you have chosen option (b), answer yes to CONFIG_MODVERSIONS
55 and no (!) to CONFIG_CM206 and CONFIG_ISO9660_FS.
56
572) then do a
58
59 make clean; make zImage; make modules
60
613) do the usual things to install a new image (backup the old one, run
62 `rdev -R zImage 1', copy the new image in place, run lilo). Might
63 be `make zlilo'.
64
65Using the driver as a module
66----------------------------
67If you will only occasionally use the cd-rom driver, you can choose
68option (b), install as a loadable module. You may have to re-compile
69the module when you upgrade the kernel to a new version.
70
71Since version 0.96, much of the functionality has been transferred to
72a generic cdrom interface in the file cdrom.c. The module cm206.o
73depends on cdrom.o. If the latter is not compiled into the kernel,
74you must explicitly load it before cm206.o:
75
76 insmod /usr/src/linux/modules/cdrom.o
77
78To install the module, you use the command, as root
79
80 insmod /usr/src/linux/modules/cm206.o
81
82You can specify the base address on the command line as well as the irq
83line to be used, e.g.
84
85 insmod /usr/src/linux/modules/cm206.o cm206=0x300,11
86
87The order of base port and irq line doesn't matter; if you specify only
88one, the other will have the value of the compiled-in default. You
89may also have to install the file-system module `iso9660.o', if you
90didn't compile that into the kernel.
91
92
93Using the driver as part of the kernel
94--------------------------------------
95If you have chosen option (a), you can specify the base-port
96address and irq on the lilo boot command line, e.g.:
97
98 LILO: linux cm206=0x340,11
99
100This assumes that your linux kernel image keyword is `linux'.
101If you specify either IRQ (3--11) or base port (0x300--0x370),
102auto probing is turned off for both settings, thus setting the
103other value to the compiled-in default.
104
105Note that you can also put these parameters in the lilo configuration file:
106
107# linux config
108image = /vmlinuz
109 root = /dev/hda1
110 label = Linux
111 append = "cm206=0x340,11"
112 read-only
113
114
115If module parameters and LILO config options don't work
116-------------------------------------------------------
117If autoprobing does not work, you can hard-wire the default values
118of the base port address (CM206_BASE) and interrupt request line
119(CM206_IRQ) into the file /usr/src/linux/drivers/cdrom/cm206.h. Change
120the defines of CM206_IRQ and CM206_BASE.
121
122
123Mounting the cdrom
124------------------
1251) Make sure that the right device is installed in /dev.
126
127 mknod /dev/cm206cd b 32 0
128
1292) Make sure there is a mount point, e.g., /cdrom
130
131 mkdir /cdrom
132
1333) mount using a command like this (run as root):
134
135 mount -rt iso9660 /dev/cm206cd /cdrom
136
1374) For user-mounts, add a line in /etc/fstab
138
139 /dev/cm206cd /cdrom iso9660 ro,noauto,user
140
141 This will allow users to give the commands
142
143 mount /cdrom
144 umount /cdrom
145
146If things don't work
147--------------------
148
149- Try to do a `dmesg' to find out if the driver said anything about
150 what is going wrong during the initialization.
151
152- Try to do a `dd if=/dev/cm206cd | od -tc | less' to read from the
153 CD.
154
155- Look in the /proc directory to see if `cm206' shows up under one of
156 `interrupts', `ioports', `devices' or `modules' (if applicable).
157
158
159DISCLAIMER
160----------
161I cannot guarantee that this driver works, or that the hardware will
162not be harmed, although I consider it most unlikely.
163
164I hope that you'll find this driver in some way useful.
165
166 David van Leeuwen
167 david@tm.tno.nl
168
169Note for Linux CDROM vendors
170-----------------------------
171You are encouraged to include this driver on your Linux CDROM. If
172you do, you might consider sending me a free copy of that cd-rom.
173You can contact me through my e-mail address, david@tm.tno.nl.
174If this driver is compiled into a kernel to boot off a cdrom,
175you should actually send me a free copy of that cd-rom.
176
177Copyright
178---------
179The copyright of the cm206 driver for Linux is
180
181 (c) 1995 David A. van Leeuwen
182
183The driver is released under the conditions of the GNU general public
184license, which can be found in the file COPYING in the root of this
185source tree.