Merge branch 'for-jeff' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into tmp

1 files changed, 12 insertions, 26 deletions

diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl
index 42c75ba71ba2..a42a8a4c7689 100644
--- a/Documentation/DocBook/z8530book.tmpl
+++ b/Documentation/DocBook/z8530book.tmpl
@@ -69,12 +69,6 @@
         device to be used as both a tty interface and as a synchronous 
         controller is a project for Linux post the 2.4 release
   </para>
-  <para>
-        The support code handles most common card configurations and
-        supports running both Cisco HDLC and Synchronous PPP. With extra
-        glue the frame relay and X.25 protocols can also be used with this
-        driver.
-  </para>
   </chapter>
   
   <chapter id="Driver_Modes">
@@ -179,35 +173,27 @@
   <para>
         If you wish to use the network interface facilities of the driver,
         then you need to attach a network device to each channel that is
-        present and in use. In addition to use the SyncPPP and Cisco HDLC
+        present and in use. In addition to use the generic HDLC
         you need to follow some additional plumbing rules. They may seem 
         complex but a look at the example hostess_sv11 driver should
         reassure you.
   </para>
   <para>
         The network device used for each channel should be pointed to by
-        the netdevice field of each channel. The dev-&gt; priv field of the
+        the netdevice field of each channel. The hdlc-&gt; priv field of the
         network device points to your private data - you will need to be
-        able to find your ppp device from this. In addition to use the
-        sync ppp layer the private data must start with a void * pointer
-        to the syncppp structures.
+        able to find your private data from this.
   </para>
   <para>
         The way most drivers approach this particular problem is to
         create a structure holding the Z8530 device definition and
-        put that and the syncppp pointer into the private field of
-        the network device. The network device fields of the channels
-        then point back to the network devices. The ppp_device can also
-        be put in the private structure conveniently.
+        put that into the private field of the network device. The
+        network device fields of the channels then point back to the
+        network devices.
   </para>
   <para>
-        If you wish to use the synchronous ppp then you need to attach
-        the syncppp layer to the network device. You should do this before
-        you register the network device. The
-        <function>sppp_attach</function> requires that the first void *
-        pointer in your private data is pointing to an empty struct
-        ppp_device. The function fills in the initial data for the
-        ppp/hdlc layer.
+        If you wish to use the generic HDLC then you need to register
+        the HDLC device.
   </para>
   <para>
         Before you register your network device you will also need to
@@ -314,10 +300,10 @@
         buffer in sk_buff format and queues it for transmission. The
         caller must provide the entire packet with the exception of the
         bitstuffing and CRC. This is normally done by the caller via
-        the syncppp interface layer. It returns 0 if the buffer has been 
-        queued and non zero values  for queue full. If the function accepts 
-        the buffer it becomes property of the Z8530 layer and the caller 
-        should not free it. 
+        the generic HDLC interface layer. It returns 0 if the buffer has been
+        queued and non zero values for queue full. If the function accepts
+        the buffer it becomes property of the Z8530 layer and the caller
+        should not free it.
   </para>
   <para>
         The function <function>z8530_get_stats</function> returns a pointer