Merge branch 'thinkpad' into release

3 files changed, 49 insertions, 493 deletions

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index f2296ecedb89..e2ddcdeb61b6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -36,8 +36,6 @@ detailed description):
         - Bluetooth enable and disable
         - video output switching, expansion control
         - ThinkLight on and off
-        - limited docking and undocking
-        - UltraBay eject
         - CMOS/UCMS control
         - LED control
         - ACPI sounds
@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
 
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
-        ibm/dock GDCK 00000003 00000001 -- eject request
-        ibm/dock GDCK 00000003 00000002 -- undocked
-        ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
-        Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
-        echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
-        echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
-        ibm/bay MSTR 00000003 00000000 -- eject request
-        ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
-        Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
-        echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
-        echo eject > /proc/acpi/ibm/bay
-        put the ThinkPad to sleep
-        remove the drive
-        resume from sleep
-        cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
 CMOS/UCMS control
 -----------------
 
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 46dad12f952f..77c6097ced80 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -277,31 +277,6 @@ config THINKPAD_ACPI_UNSAFE_LEDS
           Say N here, unless you are building a kernel for your own
           use, and need to control the important firmware LEDs.
 
-config THINKPAD_ACPI_DOCK
-        bool "Legacy Docking Station Support"
-        depends on THINKPAD_ACPI
-        depends on ACPI_DOCK=n
-        default n
-        ---help---
-          Allows the thinkpad_acpi driver to handle docking station events.
-          This support was made obsolete by the generic ACPI docking station
-          support (CONFIG_ACPI_DOCK).  It will allow locking and removing the
-          laptop from the docking station, but will not properly connect PCI
-          devices.
-
-          If you are not sure, say N here.
-
-config THINKPAD_ACPI_BAY
-        bool "Legacy Removable Bay Support"
-        depends on THINKPAD_ACPI
-        default y
-        ---help---
-          Allows the thinkpad_acpi driver to handle removable bays.  It will
-          electrically disable the device in the bay, and also generate
-          notifications when the bay lever is ejected or inserted.
-
-          If you are not sure, say Y here.
-
 config THINKPAD_ACPI_VIDEO
         bool "Video output control support"
         depends on THINKPAD_ACPI
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a463fd72c495..e85600852502 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -239,12 +239,6 @@ struct ibm_init_struct {
 };
 
 static struct {
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-        u32 bay_status:1;
-        u32 bay_eject:1;
-        u32 bay_status2:1;
-        u32 bay_eject2:1;
-#endif
         u32 bluetooth:1;
         u32 hotkey:1;
         u32 hotkey_mask:1;
@@ -589,18 +583,6 @@ static int acpi_ec_write(int i, u8 v)
         return 1;
 }
 
-#if defined(CONFIG_THINKPAD_ACPI_DOCK) || defined(CONFIG_THINKPAD_ACPI_BAY)
-static int _sta(acpi_handle handle)
-{
-        int status;
-
-        if (!handle || !acpi_evalf(handle, &status, "_STA", "d"))
-                status = 0;
-
-        return status;
-}
-#endif
-
 static int issue_thinkpad_cmos_command(int cmos_cmd)
 {
         if (!cmos_handle)
@@ -784,6 +766,8 @@ static int dispatch_procfs_write(struct file *file,
 
         if (!ibm || !ibm->write)
                 return -EINVAL;
+        if (count > PAGE_SIZE - 2)
+                return -EINVAL;
 
         kernbuf = kmalloc(count + 2, GFP_KERNEL);
         if (!kernbuf)
@@ -4442,293 +4426,6 @@ static struct ibm_struct light_driver_data = {
 };
 
 /*************************************************************************
- * Dock subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-
-static void dock_notify(struct ibm_struct *ibm, u32 event);
-static int dock_read(char *p);
-static int dock_write(char *buf);
-
-TPACPI_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
-           "\\_SB.PCI0.DOCK",   /* 600e/x,770e,770x,A2xm/p,T20-22,X20-21 */
-           "\\_SB.PCI0.PCI1.DOCK",      /* all others */
-           "\\_SB.PCI.ISA.SLCE",        /* 570 */
-    );                          /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */
-
-/* don't list other alternatives as we install a notify handler on the 570 */
-TPACPI_HANDLE(pci, root, "\\_SB.PCI");  /* 570 */
-
-static const struct acpi_device_id ibm_pci_device_ids[] = {
-        {PCI_ROOT_HID_STRING, 0},
-        {"", 0},
-};
-
-static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
-        {
-         .notify = dock_notify,
-         .handle = &dock_handle,
-         .type = ACPI_SYSTEM_NOTIFY,
-        },
-        {
-        /* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
-         * We just use it to get notifications of dock hotplug
-         * in very old thinkpads */
-         .hid = ibm_pci_device_ids,
-         .notify = dock_notify,
-         .handle = &pci_handle,
-         .type = ACPI_SYSTEM_NOTIFY,
-        },
-};
-
-static struct ibm_struct dock_driver_data[2] = {
-        {
-         .name = "dock",
-         .read = dock_read,
-         .write = dock_write,
-         .acpi = &ibm_dock_acpidriver[0],
-        },
-        {
-         .name = "dock",
-         .acpi = &ibm_dock_acpidriver[1],
-        },
-};
-
-#define dock_docked() (_sta(dock_handle) & 1)
-
-static int __init dock_init(struct ibm_init_struct *iibm)
-{
-        vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver\n");
-
-        TPACPI_ACPIHANDLE_INIT(dock);
-
-        vdbg_printk(TPACPI_DBG_INIT, "dock is %s\n",
-                str_supported(dock_handle != NULL));
-
-        return (dock_handle)? 0 : 1;
-}
-
-static int __init dock_init2(struct ibm_init_struct *iibm)
-{
-        int dock2_needed;
-
-        vdbg_printk(TPACPI_DBG_INIT, "initializing dock subdriver part 2\n");
-
-        if (dock_driver_data[0].flags.acpi_driver_registered &&
-            dock_driver_data[0].flags.acpi_notify_installed) {
-                TPACPI_ACPIHANDLE_INIT(pci);
-                dock2_needed = (pci_handle != NULL);
-                vdbg_printk(TPACPI_DBG_INIT,
-                            "dock PCI handler for the TP 570 is %s\n",
-                            str_supported(dock2_needed));
-        } else {
-                vdbg_printk(TPACPI_DBG_INIT,
-                "dock subdriver part 2 not required\n");
-                dock2_needed = 0;
-        }
-
-        return (dock2_needed)? 0 : 1;
-}
-
-static void dock_notify(struct ibm_struct *ibm, u32 event)
-{
-        int docked = dock_docked();
-        int pci = ibm->acpi->hid && ibm->acpi->device &&
-                acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
-        int data;
-
-        if (event == 1 && !pci) /* 570 */
-                data = 1;       /* button */
-        else if (event == 1 && pci)     /* 570 */
-                data = 3;       /* dock */
-        else if (event == 3 && docked)
-                data = 1;       /* button */
-        else if (event == 3 && !docked)
-                data = 2;       /* undock */
-        else if (event == 0 && docked)
-                data = 3;       /* dock */
-        else {
-                printk(TPACPI_ERR "unknown dock event %d, status %d\n",
-                       event, _sta(dock_handle));
-                data = 0;       /* unknown */
-        }
-        acpi_bus_generate_proc_event(ibm->acpi->device, event, data);
-        acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-                                          dev_name(&ibm->acpi->device->dev),
-                                          event, data);
-}
-
-static int dock_read(char *p)
-{
-        int len = 0;
-        int docked = dock_docked();
-
-        if (!dock_handle)
-                len += sprintf(p + len, "status:\t\tnot supported\n");
-        else if (!docked)
-                len += sprintf(p + len, "status:\t\tundocked\n");
-        else {
-                len += sprintf(p + len, "status:\t\tdocked\n");
-                len += sprintf(p + len, "commands:\tdock, undock\n");
-        }
-
-        return len;
-}
-
-static int dock_write(char *buf)
-{
-        char *cmd;
-
-        if (!dock_docked())
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (strlencmp(cmd, "undock") == 0) {
-                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 0) ||
-                            !acpi_evalf(dock_handle, NULL, "_EJ0", "vd", 1))
-                                return -EIO;
-                } else if (strlencmp(cmd, "dock") == 0) {
-                        if (!acpi_evalf(dock_handle, NULL, "_DCK", "vd", 1))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        return 0;
-}
-
-#endif /* CONFIG_THINKPAD_ACPI_DOCK */
-
-/*************************************************************************
- * Bay subdriver
- */
-
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-
-TPACPI_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST",     /* 570 */
-           "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */
-           "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */
-           "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */
-           );                           /* A21e, R30, R31 */
-TPACPI_HANDLE(bay_ej, bay, "_EJ3",      /* 600e/x, A2xm/p, A3x */
-           "_EJ0",              /* all others */
-           );                   /* 570,A21e,G4x,R30,R31,R32,R40e,R50e */
-TPACPI_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV",  /* A3x, R32 */
-           "\\_SB.PCI0.IDE0.IDEP.IDPS", /* 600e/x, 770e, 770x */
-           );                           /* all others */
-TPACPI_HANDLE(bay2_ej, bay2, "_EJ3",    /* 600e/x, 770e, A3x */
-           "_EJ0",                      /* 770x */
-           );                           /* all others */
-
-static int __init bay_init(struct ibm_init_struct *iibm)
-{
-        vdbg_printk(TPACPI_DBG_INIT, "initializing bay subdriver\n");
-
-        TPACPI_ACPIHANDLE_INIT(bay);
-        if (bay_handle)
-                TPACPI_ACPIHANDLE_INIT(bay_ej);
-        TPACPI_ACPIHANDLE_INIT(bay2);
-        if (bay2_handle)
-                TPACPI_ACPIHANDLE_INIT(bay2_ej);
-
-        tp_features.bay_status = bay_handle &&
-                acpi_evalf(bay_handle, NULL, "_STA", "qv");
-        tp_features.bay_status2 = bay2_handle &&
-                acpi_evalf(bay2_handle, NULL, "_STA", "qv");
-
-        tp_features.bay_eject = bay_handle && bay_ej_handle &&
-                (strlencmp(bay_ej_path, "_EJ0") == 0 || experimental);
-        tp_features.bay_eject2 = bay2_handle && bay2_ej_handle &&
-                (strlencmp(bay2_ej_path, "_EJ0") == 0 || experimental);
-
-        vdbg_printk(TPACPI_DBG_INIT,
-                "bay 1: status %s, eject %s; bay 2: status %s, eject %s\n",
-                str_supported(tp_features.bay_status),
-                str_supported(tp_features.bay_eject),
-                str_supported(tp_features.bay_status2),
-                str_supported(tp_features.bay_eject2));
-
-        return (tp_features.bay_status || tp_features.bay_eject ||
-                tp_features.bay_status2 || tp_features.bay_eject2)? 0 : 1;
-}
-
-static void bay_notify(struct ibm_struct *ibm, u32 event)
-{
-        acpi_bus_generate_proc_event(ibm->acpi->device, event, 0);
-        acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class,
-                                          dev_name(&ibm->acpi->device->dev),
-                                          event, 0);
-}
-
-#define bay_occupied(b) (_sta(b##_handle) & 1)
-
-static int bay_read(char *p)
-{
-        int len = 0;
-        int occupied = bay_occupied(bay);
-        int occupied2 = bay_occupied(bay2);
-        int eject, eject2;
-
-        len += sprintf(p + len, "status:\t\t%s\n",
-                tp_features.bay_status ?
-                        (occupied ? "occupied" : "unoccupied") :
-                                "not supported");
-        if (tp_features.bay_status2)
-                len += sprintf(p + len, "status2:\t%s\n", occupied2 ?
-                               "occupied" : "unoccupied");
-
-        eject = tp_features.bay_eject && occupied;
-        eject2 = tp_features.bay_eject2 && occupied2;
-
-        if (eject && eject2)
-                len += sprintf(p + len, "commands:\teject, eject2\n");
-        else if (eject)
-                len += sprintf(p + len, "commands:\teject\n");
-        else if (eject2)
-                len += sprintf(p + len, "commands:\teject2\n");
-
-        return len;
-}
-
-static int bay_write(char *buf)
-{
-        char *cmd;
-
-        if (!tp_features.bay_eject && !tp_features.bay_eject2)
-                return -ENODEV;
-
-        while ((cmd = next_cmd(&buf))) {
-                if (tp_features.bay_eject && strlencmp(cmd, "eject") == 0) {
-                        if (!acpi_evalf(bay_ej_handle, NULL, NULL, "vd", 1))
-                                return -EIO;
-                } else if (tp_features.bay_eject2 &&
-                           strlencmp(cmd, "eject2") == 0) {
-                        if (!acpi_evalf(bay2_ej_handle, NULL, NULL, "vd", 1))
-                                return -EIO;
-                } else
-                        return -EINVAL;
-        }
-
-        return 0;
-}
-
-static struct tp_acpi_drv_struct ibm_bay_acpidriver = {
-        .notify = bay_notify,
-        .handle = &bay_handle,
-        .type = ACPI_SYSTEM_NOTIFY,
-};
-
-static struct ibm_struct bay_driver_data = {
-        .name = "bay",
-        .read = bay_read,
-        .write = bay_write,
-        .acpi = &ibm_bay_acpidriver,
-};
-
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
-
-/*************************************************************************
  * CMOS subdriver
  */
 
@@ -5945,14 +5642,48 @@ static struct backlight_ops ibm_backlight_data = {
 
 /* --------------------------------------------------------------------- */
 
+/*
+ * These are only useful for models that have only one possibility
+ * of GPU.  If the BIOS model handles both ATI and Intel, don't use
+ * these quirks.
+ */
+#define TPACPI_BRGHT_Q_NOEC     0x0001  /* Must NOT use EC HBRV */
+#define TPACPI_BRGHT_Q_EC       0x0002  /* Should or must use EC HBRV */
+#define TPACPI_BRGHT_Q_ASK      0x8000  /* Ask for user report */
+
+static const struct tpacpi_quirk brightness_quirk_table[] __initconst = {
+        /* Models with ATI GPUs known to require ECNVRAM mode */
+        TPACPI_Q_IBM('1', 'Y', TPACPI_BRGHT_Q_EC),      /* T43/p ATI */
+
+        /* Models with ATI GPUs (waiting confirmation) */
+        TPACPI_Q_IBM('1', 'R', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+        TPACPI_Q_IBM('1', 'Q', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+        TPACPI_Q_IBM('7', '6', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+        TPACPI_Q_IBM('7', '8', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_EC),
+
+        /* Models with Intel Extreme Graphics 2 (waiting confirmation) */
+        TPACPI_Q_IBM('1', 'V', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+        TPACPI_Q_IBM('1', 'W', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+        TPACPI_Q_IBM('1', 'U', TPACPI_BRGHT_Q_ASK|TPACPI_BRGHT_Q_NOEC),
+
+        /* Models with Intel GMA900 */
+        TPACPI_Q_IBM('7', '0', TPACPI_BRGHT_Q_NOEC),    /* T43, R52 */
+        TPACPI_Q_IBM('7', '4', TPACPI_BRGHT_Q_NOEC),    /* X41 */
+        TPACPI_Q_IBM('7', '5', TPACPI_BRGHT_Q_NOEC),    /* X41 Tablet */
+};
+
 static int __init brightness_init(struct ibm_init_struct *iibm)
 {
         int b;
+        unsigned long quirks;
 
         vdbg_printk(TPACPI_DBG_INIT, "initializing brightness subdriver\n");
 
         mutex_init(&brightness_mutex);
 
+        quirks = tpacpi_check_quirks(brightness_quirk_table,
+                                ARRAY_SIZE(brightness_quirk_table));
+
         /*
          * We always attempt to detect acpi support, so as to switch
          * Lenovo Vista BIOS to ACPI brightness mode even if we are not
@@ -6009,23 +5740,13 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
         /* TPACPI_BRGHT_MODE_AUTO not implemented yet, just use default */
         if (brightness_mode == TPACPI_BRGHT_MODE_AUTO ||
             brightness_mode == TPACPI_BRGHT_MODE_MAX) {
-                if (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) {
-                        /*
-                         * IBM models that define HBRV probably have
-                         * EC-based backlight level control
-                         */
-                        if (acpi_evalf(ec_handle, NULL, "HBRV", "qd"))
-                                /* T40-T43, R50-R52, R50e, R51e, X31-X41 */
-                                brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
-                        else
-                                /* all other IBM ThinkPads */
-                                brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
-                } else
-                        /* All Lenovo ThinkPads */
+                if (quirks & TPACPI_BRGHT_Q_EC)
+                        brightness_mode = TPACPI_BRGHT_MODE_ECNVRAM;
+                else
                         brightness_mode = TPACPI_BRGHT_MODE_UCMS_STEP;
 
                 dbg_printk(TPACPI_DBG_BRGHT,
-                           "selected brightness_mode=%d\n",
+                           "driver auto-selected brightness_mode=%d\n",
                            brightness_mode);
         }
 
@@ -6052,6 +5773,15 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
         vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
                         "brightness is supported\n");
 
+        if (quirks & TPACPI_BRGHT_Q_ASK) {
+                printk(TPACPI_NOTICE
+                        "brightness: will use unverified default: "
+                        "brightness_mode=%d\n", brightness_mode);
+                printk(TPACPI_NOTICE
+                        "brightness: please report to %s whether it works well "
+                        "or not on your ThinkPad\n", TPACPI_MAIL);
+        }
+
         ibm_backlight_device->props.max_brightness =
                                 (tp_features.bright_16levels)? 15 : 7;
         ibm_backlight_device->props.brightness = b & TP_EC_BACKLIGHT_LVLMSK;
@@ -7854,22 +7584,6 @@ static struct ibm_init_struct ibms_init[] __initdata = {
                 .init = light_init,
                 .data = &light_driver_data,
         },
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-        {
-                .init = dock_init,
-                .data = &dock_driver_data[0],
-        },
-        {
-                .init = dock_init2,
-                .data = &dock_driver_data[1],
-        },
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-        {
-                .init = bay_init,
-                .data = &bay_driver_data,
-        },
-#endif
         {
                 .init = cmos_init,
                 .data = &cmos_driver_data,
@@ -7968,12 +7682,6 @@ TPACPI_PARAM(hotkey);
 TPACPI_PARAM(bluetooth);
 TPACPI_PARAM(video);
 TPACPI_PARAM(light);
-#ifdef CONFIG_THINKPAD_ACPI_DOCK
-TPACPI_PARAM(dock);
-#endif
-#ifdef CONFIG_THINKPAD_ACPI_BAY
-TPACPI_PARAM(bay);
-#endif /* CONFIG_THINKPAD_ACPI_BAY */
 TPACPI_PARAM(cmos);
 TPACPI_PARAM(led);
 TPACPI_PARAM(beep);