aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMyungJoo Ham <myungjoo.ham@samsung.com>2011-03-10 21:34:44 -0500
committerSamuel Ortiz <sameo@linux.intel.com>2011-03-23 05:42:07 -0400
commitbd6ca2cf50fbe3cc63513d026343035c3bd2e352 (patch)
treef5dd14851a7139a37781073ef3f1366254940415
parente93c53870c6d77c40de8981da238af947d6aa084 (diff)
regulator: MAX8997/8966 support
This patch supports PMIC/Regulator part of MAX8997/MAX8966 MFD. In this initial release, selecting voltages or current-limit and switching on/off the regulators are supported. Controlling voltages for DVS with GPIOs is not implemented fully and requires more considerations: it controls multiple bucks (selection of 1, 2, and 5) at the same time with SET1~3 gpios. Thus, when DVS-GPIO is activated, we lose the ability to control the voltage of a single buck regulator independently; i.e., contolling a buck affects other two bucks. Therefore, using the conventional regulator framework directly might be problematic. However, in this driver, we try to choose a setting without such side effect of affecting other regulators and then try to choose a setting with the minimum side effect (the sum of voltage changes in other regulators). On the other hand, controlling all the three bucks simultenously based on the voltage set table may help build cpufreq and similar system more robust; i.e., all the three voltages are consistent every time without glitches during transition. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat
-rw-r--r--drivers/regulator/Kconfig9
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/max8997.c1213
-rw-r--r--include/linux/mfd/max8997.h28
4 files changed, 1250 insertions, 1 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index e1d943619ab8..395d35941b84 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -108,6 +108,15 @@ config REGULATOR_MAX8952
108 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS 108 via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
109 modes ranging from 0.77V to 1.40V by 0.01V steps. 109 modes ranging from 0.77V to 1.40V by 0.01V steps.
110 110
111config REGULATOR_MAX8997
112 tristate "Maxim 8997/8966 regulator"
113 depends on MFD_MAX8997
114 help
115 This driver controls a Maxim 8997/8966 regulator
116 via I2C bus. The provided regulator is suitable for S5PC110,
117 S5PV210, and Exynos-4 chips to control VCC_CORE and
118 VCC_USIM voltages.
119
111config REGULATOR_MAX8998 120config REGULATOR_MAX8998
112 tristate "Maxim 8998 voltage regulator" 121 tristate "Maxim 8998 voltage regulator"
113 depends on MFD_MAX8998 122 depends on MFD_MAX8998
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0b5e88c2b8d7..e43b8524871e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
18obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o 18obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
19obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o 19obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
20obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o 20obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
21obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
21obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o 22obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
22obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o 23obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
23obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o 24obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
new file mode 100644
index 000000000000..01ef7e9903bb
--- /dev/null
+++ b/drivers/regulator/max8997.c
@@ -0,0 +1,1213 @@
1/*
2 * max8997.c - Regulator driver for the Maxim 8997/8966
3 *
4 * Copyright (C) 2011 Samsung Electronics
5 * MyungJoo Ham <myungjoo.ham@smasung.com>
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 *
21 * This driver is based on max8998.c
22 */
23
24#include <linux/bug.h>
25#include <linux/delay.h>
26#include <linux/err.h>
27#include <linux/gpio.h>
28#include <linux/slab.h>
29#include <linux/platform_device.h>
30#include <linux/regulator/driver.h>
31#include <linux/regulator/machine.h>
32#include <linux/mfd/max8997.h>
33#include <linux/mfd/max8997-private.h>
34
35struct max8997_data {
36 struct device *dev;
37 struct max8997_dev *iodev;
38 int num_regulators;
39 struct regulator_dev **rdev;
40 int ramp_delay; /* in mV/us */
41
42 u8 buck1_vol[8];
43 u8 buck2_vol[8];
44 u8 buck5_vol[8];
45 int buck125_gpioindex;
46
47 u8 saved_states[MAX8997_REG_MAX];
48};
49
50static inline void max8997_set_gpio(struct max8997_data *max8997)
51{
52 struct max8997_platform_data *pdata =
53 dev_get_platdata(max8997->iodev->dev);
54 int set3 = (max8997->buck125_gpioindex) & 0x1;
55 int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
56 int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
57
58 gpio_set_value(pdata->buck125_gpios[0], set1);
59 gpio_set_value(pdata->buck125_gpios[1], set2);
60 gpio_set_value(pdata->buck125_gpios[2], set3);
61}
62
63struct voltage_map_desc {
64 int min;
65 int max;
66 int step;
67 unsigned int n_bits;
68};
69
70/* Voltage maps in mV */
71static const struct voltage_map_desc ldo_voltage_map_desc = {
72 .min = 800, .max = 3950, .step = 50, .n_bits = 6,
73}; /* LDO1 ~ 18, 21 all */
74
75static const struct voltage_map_desc buck1245_voltage_map_desc = {
76 .min = 650, .max = 2225, .step = 25, .n_bits = 6,
77}; /* Buck1, 2, 4, 5 */
78
79static const struct voltage_map_desc buck37_voltage_map_desc = {
80 .min = 750, .max = 3900, .step = 50, .n_bits = 6,
81}; /* Buck3, 7 */
82
83/* current map in mA */
84static const struct voltage_map_desc charger_current_map_desc = {
85 .min = 200, .max = 950, .step = 50, .n_bits = 4,
86};
87
88static const struct voltage_map_desc topoff_current_map_desc = {
89 .min = 50, .max = 200, .step = 10, .n_bits = 4,
90};
91
92static const struct voltage_map_desc *reg_voltage_map[] = {
93 [MAX8997_LDO1] = &ldo_voltage_map_desc,
94 [MAX8997_LDO2] = &ldo_voltage_map_desc,
95 [MAX8997_LDO3] = &ldo_voltage_map_desc,
96 [MAX8997_LDO4] = &ldo_voltage_map_desc,
97 [MAX8997_LDO5] = &ldo_voltage_map_desc,
98 [MAX8997_LDO6] = &ldo_voltage_map_desc,
99 [MAX8997_LDO7] = &ldo_voltage_map_desc,
100 [MAX8997_LDO8] = &ldo_voltage_map_desc,
101 [MAX8997_LDO9] = &ldo_voltage_map_desc,
102 [MAX8997_LDO10] = &ldo_voltage_map_desc,
103 [MAX8997_LDO11] = &ldo_voltage_map_desc,
104 [MAX8997_LDO12] = &ldo_voltage_map_desc,
105 [MAX8997_LDO13] = &ldo_voltage_map_desc,
106 [MAX8997_LDO14] = &ldo_voltage_map_desc,
107 [MAX8997_LDO15] = &ldo_voltage_map_desc,
108 [MAX8997_LDO16] = &ldo_voltage_map_desc,
109 [MAX8997_LDO17] = &ldo_voltage_map_desc,
110 [MAX8997_LDO18] = &ldo_voltage_map_desc,
111 [MAX8997_LDO21] = &ldo_voltage_map_desc,
112 [MAX8997_BUCK1] = &buck1245_voltage_map_desc,
113 [MAX8997_BUCK2] = &buck1245_voltage_map_desc,
114 [MAX8997_BUCK3] = &buck37_voltage_map_desc,
115 [MAX8997_BUCK4] = &buck1245_voltage_map_desc,
116 [MAX8997_BUCK5] = &buck1245_voltage_map_desc,
117 [MAX8997_BUCK6] = NULL,
118 [MAX8997_BUCK7] = &buck37_voltage_map_desc,
119 [MAX8997_EN32KHZ_AP] = NULL,
120 [MAX8997_EN32KHZ_CP] = NULL,
121 [MAX8997_ENVICHG] = NULL,
122 [MAX8997_ESAFEOUT1] = NULL,
123 [MAX8997_ESAFEOUT2] = NULL,
124 [MAX8997_CHARGER_CV] = NULL,
125 [MAX8997_CHARGER] = &charger_current_map_desc,
126 [MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
127};
128
129static inline int max8997_get_rid(struct regulator_dev *rdev)
130{
131 return rdev_get_id(rdev);
132}
133
134static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
135 unsigned int selector)
136{
137 int rid = max8997_get_rid(rdev);
138
139 if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
140 switch (selector) {
141 case 0:
142 return 4850000;
143 case 1:
144 return 4900000;
145 case 2:
146 return 4950000;
147 case 3:
148 return 3300000;
149 default:
150 return -EINVAL;
151 }
152 }
153
154 return -EINVAL;
155}
156
157static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
158 unsigned int selector)
159{
160 int rid = max8997_get_rid(rdev);
161
162 if (rid != MAX8997_CHARGER_CV)
163 goto err;
164
165 switch (selector) {
166 case 0x00:
167 return 4200000;
168 case 0x01 ... 0x0E:
169 return 4000000 + 20000 * (selector - 0x01);
170 case 0x0F:
171 return 4350000;
172 default:
173 return -EINVAL;
174 }
175err:
176 return -EINVAL;
177}
178
179static int max8997_list_voltage(struct regulator_dev *rdev,
180 unsigned int selector)
181{
182 const struct voltage_map_desc *desc;
183 int rid = max8997_get_rid(rdev);
184 int val;
185
186 if (rid >= ARRAY_SIZE(reg_voltage_map) ||
187 rid < 0)
188 return -EINVAL;
189
190 desc = reg_voltage_map[rid];
191 if (desc == NULL)
192 return -EINVAL;
193
194 val = desc->min + desc->step * selector;
195 if (val > desc->max)
196 return -EINVAL;
197
198 return val * 1000;
199}
200
201static int max8997_get_enable_register(struct regulator_dev *rdev,
202 int *reg, int *mask, int *pattern)
203{
204 int rid = max8997_get_rid(rdev);
205
206 switch (rid) {
207 case MAX8997_LDO1 ... MAX8997_LDO21:
208 *reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
209 *mask = 0xC0;
210 *pattern = 0xC0;
211 break;
212 case MAX8997_BUCK1:
213 *reg = MAX8997_REG_BUCK1CTRL;
214 *mask = 0x01;
215 *pattern = 0x01;
216 break;
217 case MAX8997_BUCK2:
218 *reg = MAX8997_REG_BUCK2CTRL;
219 *mask = 0x01;
220 *pattern = 0x01;
221 break;
222 case MAX8997_BUCK3:
223 *reg = MAX8997_REG_BUCK3CTRL;
224 *mask = 0x01;
225 *pattern = 0x01;
226 break;
227 case MAX8997_BUCK4:
228 *reg = MAX8997_REG_BUCK4CTRL;
229 *mask = 0x01;
230 *pattern = 0x01;
231 break;
232 case MAX8997_BUCK5:
233 *reg = MAX8997_REG_BUCK5CTRL;
234 *mask = 0x01;
235 *pattern = 0x01;
236 break;
237 case MAX8997_BUCK6:
238 *reg = MAX8997_REG_BUCK6CTRL;
239 *mask = 0x01;
240 *pattern = 0x01;
241 break;
242 case MAX8997_BUCK7:
243 *reg = MAX8997_REG_BUCK7CTRL;
244 *mask = 0x01;
245 *pattern = 0x01;
246 break;
247 case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP:
248 *reg = MAX8997_REG_MAINCON1;
249 *mask = 0x01 << (rid - MAX8997_EN32KHZ_AP);
250 *pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP);
251 break;
252 case MAX8997_ENVICHG:
253 *reg = MAX8997_REG_MBCCTRL1;
254 *mask = 0x80;
255 *pattern = 0x80;
256 break;
257 case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
258 *reg = MAX8997_REG_SAFEOUTCTRL;
259 *mask = 0x40 << (rid - MAX8997_ESAFEOUT1);
260 *pattern = 0x40 << (rid - MAX8997_ESAFEOUT1);
261 break;
262 case MAX8997_CHARGER:
263 *reg = MAX8997_REG_MBCCTRL2;
264 *mask = 0x40;
265 *pattern = 0x40;
266 break;
267 default:
268 /* Not controllable or not exists */
269 return -EINVAL;
270 break;
271 }
272
273 return 0;
274}
275
276static int max8997_reg_is_enabled(struct regulator_dev *rdev)
277{
278 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
279 struct i2c_client *i2c = max8997->iodev->i2c;
280 int ret, reg, mask, pattern;
281 u8 val;
282
283 ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
284 if (ret == -EINVAL)
285 return 1; /* "not controllable" */
286 else if (ret)
287 return ret;
288
289 ret = max8997_read_reg(i2c, reg, &val);
290 if (ret)
291 return ret;
292
293 return (val & mask) == pattern;
294}
295
296static int max8997_reg_enable(struct regulator_dev *rdev)
297{
298 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
299 struct i2c_client *i2c = max8997->iodev->i2c;
300 int ret, reg, mask, pattern;
301
302 ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
303 if (ret)
304 return ret;
305
306 return max8997_update_reg(i2c, reg, pattern, mask);
307}
308
309static int max8997_reg_disable(struct regulator_dev *rdev)
310{
311 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
312 struct i2c_client *i2c = max8997->iodev->i2c;
313 int ret, reg, mask, pattern;
314
315 ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
316 if (ret)
317 return ret;
318
319 return max8997_update_reg(i2c, reg, ~pattern, mask);
320}
321
322static int max8997_get_voltage_register(struct regulator_dev *rdev,
323 int *_reg, int *_shift, int *_mask)
324{
325 int rid = max8997_get_rid(rdev);
326 int reg, shift = 0, mask = 0x3f;
327
328 switch (rid) {
329 case MAX8997_LDO1 ... MAX8997_LDO21:
330 reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1);
331 break;
332 case MAX8997_BUCK1:
333 reg = MAX8997_REG_BUCK1DVS1;
334 break;
335 case MAX8997_BUCK2:
336 reg = MAX8997_REG_BUCK2DVS1;
337 break;
338 case MAX8997_BUCK3:
339 reg = MAX8997_REG_BUCK3DVS;
340 break;
341 case MAX8997_BUCK4:
342 reg = MAX8997_REG_BUCK4DVS;
343 break;
344 case MAX8997_BUCK5:
345 reg = MAX8997_REG_BUCK5DVS1;
346 break;
347 case MAX8997_BUCK7:
348 reg = MAX8997_REG_BUCK7DVS;
349 break;
350 case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2:
351 reg = MAX8997_REG_SAFEOUTCTRL;
352 shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0;
353 mask = 0x3;
354 break;
355 case MAX8997_CHARGER_CV:
356 reg = MAX8997_REG_MBCCTRL3;
357 shift = 0;
358 mask = 0xf;
359 break;
360 case MAX8997_CHARGER:
361 reg = MAX8997_REG_MBCCTRL4;
362 shift = 0;
363 mask = 0xf;
364 break;
365 case MAX8997_CHARGER_TOPOFF:
366 reg = MAX8997_REG_MBCCTRL5;
367 shift = 0;
368 mask = 0xf;
369 break;
370 default:
371 return -EINVAL;
372 }
373
374 *_reg = reg;
375 *_shift = shift;
376 *_mask = mask;
377
378 return 0;
379}
380
381static int max8997_get_voltage(struct regulator_dev *rdev)
382{
383 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
384 struct max8997_platform_data *pdata =
385 dev_get_platdata(max8997->iodev->dev);
386 struct i2c_client *i2c = max8997->iodev->i2c;
387 int reg, shift, mask, ret;
388 int rid = max8997_get_rid(rdev);
389 u8 val;
390
391 ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
392 if (ret)
393 return ret;
394
395 if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) ||
396 (rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) ||
397 (rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs))
398 reg += max8997->buck125_gpioindex;
399
400 ret = max8997_read_reg(i2c, reg, &val);
401 if (ret)
402 return ret;
403
404 val >>= shift;
405 val &= mask;
406
407 if (rdev->desc && rdev->desc->ops && rdev->desc->ops->list_voltage)
408 return rdev->desc->ops->list_voltage(rdev, val);
409
410 /*
411 * max8997_list_voltage returns value for any rdev with voltage_map,
412 * which works for "CHARGER" and "CHARGER TOPOFF" that do not have
413 * list_voltage ops (they are current regulators).
414 */
415 return max8997_list_voltage(rdev, val);
416}
417
418static inline int max8997_get_voltage_proper_val(
419 const struct voltage_map_desc *desc,
420 int min_vol, int max_vol)
421{
422 int i = 0;
423
424 if (desc == NULL)
425 return -EINVAL;
426
427 if (max_vol < desc->min || min_vol > desc->max)
428 return -EINVAL;
429
430 while (desc->min + desc->step * i < min_vol &&
431 desc->min + desc->step * i < desc->max)
432 i++;
433
434 if (desc->min + desc->step * i > max_vol)
435 return -EINVAL;
436
437 if (i >= (1 << desc->n_bits))
438 return -EINVAL;
439
440 return i;
441}
442
443static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev,
444 int min_uV, int max_uV, unsigned *selector)
445{
446 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
447 struct i2c_client *i2c = max8997->iodev->i2c;
448 int rid = max8997_get_rid(rdev);
449 int lb, ub;
450 int reg, shift = 0, mask, ret = 0;
451 u8 val = 0x0;
452
453 if (rid != MAX8997_CHARGER_CV)
454 return -EINVAL;
455
456 ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
457 if (ret)
458 return ret;
459
460 if (max_uV < 4000000 || min_uV > 4350000)
461 return -EINVAL;
462
463 if (min_uV <= 4000000) {
464 if (max_uV >= 4000000)
465 return -EINVAL;
466 else
467 val = 0x1;
468 } else if (min_uV <= 4200000 && max_uV >= 4200000)
469 val = 0x0;
470 else {
471 lb = (min_uV - 4000001) / 20000 + 2;
472 ub = (max_uV - 4000000) / 20000 + 1;
473
474 if (lb > ub)
475 return -EINVAL;
476
477 if (lb < 0xf)
478 val = lb;
479 else {
480 if (ub >= 0xf)
481 val = 0xf;
482 else
483 return -EINVAL;
484 }
485 }
486
487 *selector = val;
488
489 ret = max8997_update_reg(i2c, reg, val << shift, mask);
490
491 return ret;
492}
493
494/*
495 * For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF
496 * BUCK1, 2, and 5 are available if they are not controlled by gpio
497 */
498static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
499 int min_uV, int max_uV, unsigned *selector)
500{
501 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
502 struct i2c_client *i2c = max8997->iodev->i2c;
503 int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
504 const struct voltage_map_desc *desc;
505 int rid = max8997_get_rid(rdev);
506 int reg, shift = 0, mask, ret;
507 int i;
508 u8 org;
509
510 switch (rid) {
511 case MAX8997_LDO1 ... MAX8997_LDO21:
512 break;
513 case MAX8997_BUCK1 ... MAX8997_BUCK5:
514 break;
515 case MAX8997_BUCK6:
516 return -EINVAL;
517 case MAX8997_BUCK7:
518 break;
519 case MAX8997_CHARGER:
520 break;
521 case MAX8997_CHARGER_TOPOFF:
522 break;
523 default:
524 return -EINVAL;
525 }
526
527 desc = reg_voltage_map[rid];
528
529 i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
530 if (i < 0)
531 return i;
532
533 ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
534 if (ret)
535 return ret;
536
537 max8997_read_reg(i2c, reg, &org);
538 org = (org & mask) >> shift;
539
540 ret = max8997_update_reg(i2c, reg, i << shift, mask << shift);
541 *selector = i;
542
543 if (rid == MAX8997_BUCK1 || rid == MAX8997_BUCK2 ||
544 rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
545 /* If the voltage is increasing */
546 if (org < i)
547 udelay(desc->step * (i - org) / max8997->ramp_delay);
548 }
549
550 return ret;
551}
552
553/*
554 * Assess the damage on the voltage setting of BUCK1,2,5 by the change.
555 *
556 * When GPIO-DVS mode is used for multiple bucks, changing the voltage value
557 * of one of the bucks may affect that of another buck, which is the side
558 * effect of the change (set_voltage). This function examines the GPIO-DVS
559 * configurations and checks whether such side-effect exists.
560 */
561static int max8997_assess_side_effect(struct regulator_dev *rdev,
562 u8 new_val, int *best)
563{
564 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
565 struct max8997_platform_data *pdata =
566 dev_get_platdata(max8997->iodev->dev);
567 int rid = max8997_get_rid(rdev);
568 u8 *buckx_val[3];
569 bool buckx_gpiodvs[3];
570 int side_effect[8];
571 int min_side_effect = INT_MAX;
572 int i;
573
574 *best = -1;
575
576 switch (rid) {
577 case MAX8997_BUCK1:
578 rid = 0;
579 break;
580 case MAX8997_BUCK2:
581 rid = 1;
582 break;
583 case MAX8997_BUCK5:
584 rid = 2;
585 break;
586 default:
587 return -EINVAL;
588 }
589
590 buckx_val[0] = max8997->buck1_vol;
591 buckx_val[1] = max8997->buck2_vol;
592 buckx_val[2] = max8997->buck5_vol;
593 buckx_gpiodvs[0] = pdata->buck1_gpiodvs;
594 buckx_gpiodvs[1] = pdata->buck2_gpiodvs;
595 buckx_gpiodvs[2] = pdata->buck5_gpiodvs;
596
597 for (i = 0; i < 8; i++) {
598 int others;
599
600 if (new_val != (buckx_val[rid])[i]) {
601 side_effect[i] = -1;
602 continue;
603 }
604
605 side_effect[i] = 0;
606 for (others = 0; others < 3; others++) {
607 int diff;
608
609 if (others == rid)
610 continue;
611 if (buckx_gpiodvs[others] == false)
612 continue; /* Not affected */
613 diff = (buckx_val[others])[i] -
614 (buckx_val[others])[max8997->buck125_gpioindex];
615 if (diff > 0)
616 side_effect[i] += diff;
617 else if (diff < 0)
618 side_effect[i] -= diff;
619 }
620 if (side_effect[i] == 0) {
621 *best = i;
622 return 0; /* NO SIDE EFFECT! Use This! */
623 }
624 if (side_effect[i] < min_side_effect) {
625 min_side_effect = side_effect[i];
626 *best = i;
627 }
628 }
629
630 if (*best == -1)
631 return -EINVAL;
632
633 return side_effect[*best];
634}
635
636/*
637 * For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls
638 * max8997_set_voltage_ldobuck to do the job.
639 */
640static int max8997_set_voltage_buck(struct regulator_dev *rdev,
641 int min_uV, int max_uV, unsigned *selector)
642{
643 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
644 struct max8997_platform_data *pdata =
645 dev_get_platdata(max8997->iodev->dev);
646 int rid = max8997_get_rid(rdev);
647 const struct voltage_map_desc *desc;
648 int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
649 bool gpio_dvs_mode = false;
650 int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
651
652 if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
653 return -EINVAL;
654
655 switch (rid) {
656 case MAX8997_BUCK1:
657 if (pdata->buck1_gpiodvs)
658 gpio_dvs_mode = true;
659 break;
660 case MAX8997_BUCK2:
661 if (pdata->buck2_gpiodvs)
662 gpio_dvs_mode = true;
663 break;
664 case MAX8997_BUCK5:
665 if (pdata->buck5_gpiodvs)
666 gpio_dvs_mode = true;
667 break;
668 }
669
670 if (!gpio_dvs_mode)
671 return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV,
672 selector);
673
674 desc = reg_voltage_map[rid];
675 new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
676 if (new_val < 0)
677 return new_val;
678
679 tmp_dmg = INT_MAX;
680 tmp_idx = -1;
681 tmp_val = -1;
682 do {
683 damage = max8997_assess_side_effect(rdev, new_val, &new_idx);
684 if (damage == 0)
685 goto out;
686
687 if (tmp_dmg > damage) {
688 tmp_idx = new_idx;
689 tmp_val = new_val;
690 tmp_dmg = damage;
691 }
692
693 new_val++;
694 } while (desc->min + desc->step + new_val <= desc->max);
695
696 new_idx = tmp_idx;
697 new_val = tmp_val;
698
699 if (pdata->ignore_gpiodvs_side_effect == false)
700 return -EINVAL;
701
702 dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:"
703 " %d -> %d\n", max8997->buck125_gpioindex, tmp_idx);
704
705out:
706 if (new_idx < 0 || new_val < 0)
707 return -EINVAL;
708
709 max8997->buck125_gpioindex = new_idx;
710 max8997_set_gpio(max8997);
711 *selector = new_val;
712
713 return 0;
714}
715
716static const int safeoutvolt[] = {
717 3300000,
718 4850000,
719 4900000,
720 4950000,
721};
722
723/* For SAFEOUT1 and SAFEOUT2 */
724static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
725 int min_uV, int max_uV, unsigned *selector)
726{
727 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
728 struct i2c_client *i2c = max8997->iodev->i2c;
729 int rid = max8997_get_rid(rdev);
730 int reg, shift = 0, mask, ret;
731 int i = 0;
732 u8 val;
733
734 if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
735 return -EINVAL;
736
737 for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
738 if (min_uV <= safeoutvolt[i] &&
739 max_uV >= safeoutvolt[i])
740 break;
741 }
742
743 if (i >= ARRAY_SIZE(safeoutvolt))
744 return -EINVAL;
745
746 if (i == 0)
747 val = 0x3;
748 else
749 val = i - 1;
750
751 ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
752 if (ret)
753 return ret;
754
755 ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
756 *selector = val;
757
758 return ret;
759}
760
761static int max8997_reg_enable_suspend(struct regulator_dev *rdev)
762{
763 return 0;
764}
765
766static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
767{
768 struct max8997_data *max8997 = rdev_get_drvdata(rdev);
769 struct i2c_client *i2c = max8997->iodev->i2c;
770 int ret, reg, mask, pattern;
771 int rid = max8997_get_rid(rdev);
772
773 ret = max8997_get_enable_register(rdev, &reg, &mask, &pattern);
774 if (ret)
775 return ret;
776
777 max8997_read_reg(i2c, reg, &max8997->saved_states[rid]);
778
779 if (rid == MAX8997_LDO1 ||
780 rid == MAX8997_LDO10 ||
781 rid == MAX8997_LDO21) {
782 dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n",
783 rdev->desc->name);
784 return max8997_update_reg(i2c, reg, 0x40, mask);
785 }
786
787 dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n",
788 rdev->desc->name, max8997->saved_states[rid] & mask,
789 (~pattern) & mask);
790 return max8997_update_reg(i2c, reg, ~pattern, mask);
791}
792
793static struct regulator_ops max8997_ldo_ops = {
794 .list_voltage = max8997_list_voltage,
795 .is_enabled = max8997_reg_is_enabled,
796 .enable = max8997_reg_enable,
797 .disable = max8997_reg_disable,
798 .get_voltage = max8997_get_voltage,
799 .set_voltage = max8997_set_voltage_ldobuck,
800 .set_suspend_enable = max8997_reg_enable_suspend,
801 .set_suspend_disable = max8997_reg_disable_suspend,
802};
803
804static struct regulator_ops max8997_buck_ops = {
805 .list_voltage = max8997_list_voltage,
806 .is_enabled = max8997_reg_is_enabled,
807 .enable = max8997_reg_enable,
808 .disable = max8997_reg_disable,
809 .get_voltage = max8997_get_voltage,
810 .set_voltage = max8997_set_voltage_buck,
811 .set_suspend_enable = max8997_reg_enable_suspend,
812 .set_suspend_disable = max8997_reg_disable_suspend,
813};
814
815static struct regulator_ops max8997_fixedvolt_ops = {
816 .list_voltage = max8997_list_voltage,
817 .is_enabled = max8997_reg_is_enabled,
818 .enable = max8997_reg_enable,
819 .disable = max8997_reg_disable,
820 .set_suspend_enable = max8997_reg_enable_suspend,
821 .set_suspend_disable = max8997_reg_disable_suspend,
822};
823
824static struct regulator_ops max8997_safeout_ops = {
825 .list_voltage = max8997_list_voltage_safeout,
826 .is_enabled = max8997_reg_is_enabled,
827 .enable = max8997_reg_enable,
828 .disable = max8997_reg_disable,
829 .get_voltage = max8997_get_voltage,
830 .set_voltage = max8997_set_voltage_safeout,
831 .set_suspend_enable = max8997_reg_enable_suspend,
832 .set_suspend_disable = max8997_reg_disable_suspend,
833};
834
835static struct regulator_ops max8997_fixedstate_ops = {
836 .list_voltage = max8997_list_voltage_charger_cv,
837 .get_voltage = max8997_get_voltage,
838 .set_voltage = max8997_set_voltage_charger_cv,
839};
840
841static int max8997_set_voltage_ldobuck_wrap(struct regulator_dev *rdev,
842 int min_uV, int max_uV)
843{
844 unsigned dummy;
845
846 return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, &dummy);
847}
848
849
850static struct regulator_ops max8997_charger_ops = {
851 .is_enabled = max8997_reg_is_enabled,
852 .enable = max8997_reg_enable,
853 .disable = max8997_reg_disable,
854 .get_current_limit = max8997_get_voltage,
855 .set_current_limit = max8997_set_voltage_ldobuck_wrap,
856};
857
858static struct regulator_ops max8997_charger_fixedstate_ops = {
859 .is_enabled = max8997_reg_is_enabled,
860 .get_current_limit = max8997_get_voltage,
861 .set_current_limit = max8997_set_voltage_ldobuck_wrap,
862};
863
864#define regulator_desc_ldo(num) { \
865 .name = "LDO"#num, \
866 .id = MAX8997_LDO##num, \
867 .ops = &max8997_ldo_ops, \
868 .type = REGULATOR_VOLTAGE, \
869 .owner = THIS_MODULE, \
870}
871#define regulator_desc_buck(num) { \
872 .name = "BUCK"#num, \
873 .id = MAX8997_BUCK##num, \
874 .ops = &max8997_buck_ops, \
875 .type = REGULATOR_VOLTAGE, \
876 .owner = THIS_MODULE, \
877}
878
879static struct regulator_desc regulators[] = {
880 regulator_desc_ldo(1),
881 regulator_desc_ldo(2),
882 regulator_desc_ldo(3),
883 regulator_desc_ldo(4),
884 regulator_desc_ldo(5),
885 regulator_desc_ldo(6),
886 regulator_desc_ldo(7),
887 regulator_desc_ldo(8),
888 regulator_desc_ldo(9),
889 regulator_desc_ldo(10),
890 regulator_desc_ldo(11),
891 regulator_desc_ldo(12),
892 regulator_desc_ldo(13),
893 regulator_desc_ldo(14),
894 regulator_desc_ldo(15),
895 regulator_desc_ldo(16),
896 regulator_desc_ldo(17),
897 regulator_desc_ldo(18),
898 regulator_desc_ldo(21),
899 regulator_desc_buck(1),
900 regulator_desc_buck(2),
901 regulator_desc_buck(3),
902 regulator_desc_buck(4),
903 regulator_desc_buck(5),
904 {
905 .name = "BUCK6",
906 .id = MAX8997_BUCK6,
907 .ops = &max8997_fixedvolt_ops,
908 .type = REGULATOR_VOLTAGE,
909 .owner = THIS_MODULE,
910 },
911 regulator_desc_buck(7),
912 {
913 .name = "EN32KHz AP",
914 .id = MAX8997_EN32KHZ_AP,
915 .ops = &max8997_fixedvolt_ops,
916 .type = REGULATOR_VOLTAGE,
917 .owner = THIS_MODULE,
918 }, {
919 .name = "EN32KHz CP",
920 .id = MAX8997_EN32KHZ_CP,
921 .ops = &max8997_fixedvolt_ops,
922 .type = REGULATOR_VOLTAGE,
923 .owner = THIS_MODULE,
924 }, {
925 .name = "ENVICHG",
926 .id = MAX8997_ENVICHG,
927 .ops = &max8997_fixedvolt_ops,
928 .type = REGULATOR_VOLTAGE,
929 .owner = THIS_MODULE,
930 }, {
931 .name = "ESAFEOUT1",
932 .id = MAX8997_ESAFEOUT1,
933 .ops = &max8997_safeout_ops,
934 .type = REGULATOR_VOLTAGE,
935 .owner = THIS_MODULE,
936 }, {
937 .name = "ESAFEOUT2",
938 .id = MAX8997_ESAFEOUT2,
939 .ops = &max8997_safeout_ops,
940 .type = REGULATOR_VOLTAGE,
941 .owner = THIS_MODULE,
942 }, {
943 .name = "CHARGER CV",
944 .id = MAX8997_CHARGER_CV,
945 .ops = &max8997_fixedstate_ops,
946 .type = REGULATOR_VOLTAGE,
947 .owner = THIS_MODULE,
948 }, {
949 .name = "CHARGER",
950 .id = MAX8997_CHARGER,
951 .ops = &max8997_charger_ops,
952 .type = REGULATOR_CURRENT,
953 .owner = THIS_MODULE,
954 }, {
955 .name = "CHARGER TOPOFF",
956 .id = MAX8997_CHARGER_TOPOFF,
957 .ops = &max8997_charger_fixedstate_ops,
958 .type = REGULATOR_CURRENT,
959 .owner = THIS_MODULE,
960 },
961};
962
963static __devinit int max8997_pmic_probe(struct platform_device *pdev)
964{
965 struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
966 struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
967 struct regulator_dev **rdev;
968 struct max8997_data *max8997;
969 struct i2c_client *i2c;
970 int i, ret, size;
971 u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
972
973 if (!pdata) {
974 dev_err(pdev->dev.parent, "No platform init data supplied.\n");
975 return -ENODEV;
976 }
977
978 max8997 = kzalloc(sizeof(struct max8997_data), GFP_KERNEL);
979 if (!max8997)
980 return -ENOMEM;
981
982 size = sizeof(struct regulator_dev *) * pdata->num_regulators;
983 max8997->rdev = kzalloc(size, GFP_KERNEL);
984 if (!max8997->rdev) {
985 kfree(max8997);
986 return -ENOMEM;
987 }
988
989 rdev = max8997->rdev;
990 max8997->dev = &pdev->dev;
991 max8997->iodev = iodev;
992 max8997->num_regulators = pdata->num_regulators;
993 platform_set_drvdata(pdev, max8997);
994 i2c = max8997->iodev->i2c;
995
996 max8997->buck125_gpioindex = pdata->buck125_default_idx;
997
998 for (i = 0; i < 8; i++) {
999 max8997->buck1_vol[i] = ret =
1000 max8997_get_voltage_proper_val(
1001 &buck1245_voltage_map_desc,
1002 pdata->buck1_voltage[i] / 1000,
1003 pdata->buck1_voltage[i] / 1000 +
1004 buck1245_voltage_map_desc.step);
1005 if (ret < 0)
1006 goto err_alloc;
1007
1008 max8997->buck2_vol[i] = ret =
1009 max8997_get_voltage_proper_val(
1010 &buck1245_voltage_map_desc,
1011 pdata->buck2_voltage[i] / 1000,
1012 pdata->buck2_voltage[i] / 1000 +
1013 buck1245_voltage_map_desc.step);
1014 if (ret < 0)
1015 goto err_alloc;
1016
1017 max8997->buck5_vol[i] = ret =
1018 max8997_get_voltage_proper_val(
1019 &buck1245_voltage_map_desc,
1020 pdata->buck5_voltage[i] / 1000,
1021 pdata->buck5_voltage[i] / 1000 +
1022 buck1245_voltage_map_desc.step);
1023 if (ret < 0)
1024 goto err_alloc;
1025
1026 if (max_buck1 < max8997->buck1_vol[i])
1027 max_buck1 = max8997->buck1_vol[i];
1028 if (max_buck2 < max8997->buck2_vol[i])
1029 max_buck2 = max8997->buck2_vol[i];
1030 if (max_buck5 < max8997->buck5_vol[i])
1031 max_buck5 = max8997->buck5_vol[i];
1032 }
1033
1034 /* For the safety, set max voltage before setting up */
1035 for (i = 0; i < 8; i++) {
1036 max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1),
1037 max_buck1, 0x3f);
1038 max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1),
1039 max_buck2, 0x3f);
1040 max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1),
1041 max_buck5, 0x3f);
1042 }
1043
1044 /*
1045 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
1046 * If at least one of them cares, set gpios.
1047 */
1048 if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
1049 pdata->buck5_gpiodvs) {
1050 bool gpio1set = false, gpio2set = false;
1051
1052 if (!gpio_is_valid(pdata->buck125_gpios[0]) ||
1053 !gpio_is_valid(pdata->buck125_gpios[1]) ||
1054 !gpio_is_valid(pdata->buck125_gpios[2])) {
1055 dev_err(&pdev->dev, "GPIO NOT VALID\n");
1056 ret = -EINVAL;
1057 goto err_alloc;
1058 }
1059
1060 ret = gpio_request(pdata->buck125_gpios[0],
1061 "MAX8997 SET1");
1062 if (ret == -EBUSY)
1063 dev_warn(&pdev->dev, "Duplicated gpio request"
1064 " on SET1\n");
1065 else if (ret)
1066 goto err_alloc;
1067 else
1068 gpio1set = true;
1069
1070 ret = gpio_request(pdata->buck125_gpios[1],
1071 "MAX8997 SET2");
1072 if (ret == -EBUSY)
1073 dev_warn(&pdev->dev, "Duplicated gpio request"
1074 " on SET2\n");
1075 else if (ret) {
1076 if (gpio1set)
1077 gpio_free(pdata->buck125_gpios[0]);
1078 goto err_alloc;
1079 } else
1080 gpio2set = true;
1081
1082 ret = gpio_request(pdata->buck125_gpios[2],
1083 "MAX8997 SET3");
1084 if (ret == -EBUSY)
1085 dev_warn(&pdev->dev, "Duplicated gpio request"
1086 " on SET3\n");
1087 else if (ret) {
1088 if (gpio1set)
1089 gpio_free(pdata->buck125_gpios[0]);
1090 if (gpio2set)
1091 gpio_free(pdata->buck125_gpios[1]);
1092 goto err_alloc;
1093 }
1094
1095 gpio_direction_output(pdata->buck125_gpios[0],
1096 (max8997->buck125_gpioindex >> 2)
1097 & 0x1); /* SET1 */
1098 gpio_direction_output(pdata->buck125_gpios[1],
1099 (max8997->buck125_gpioindex >> 1)
1100 & 0x1); /* SET2 */
1101 gpio_direction_output(pdata->buck125_gpios[2],
1102 (max8997->buck125_gpioindex >> 0)
1103 & 0x1); /* SET3 */
1104 ret = 0;
1105 }
1106
1107 /* DVS-GPIO disabled */
1108 max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ?
1109 (1 << 1) : (0 << 1), 1 << 1);
1110 max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ?
1111 (1 << 1) : (0 << 1), 1 << 1);
1112 max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
1113 (1 << 1) : (0 << 1), 1 << 1);
1114
1115 /* Initialize all the DVS related BUCK registers */
1116 for (i = 0; i < 8; i++) {
1117 max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1),
1118 max8997->buck1_vol[i],
1119 0x3f);
1120 max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1),
1121 max8997->buck2_vol[i],
1122 0x3f);
1123 max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1),
1124 max8997->buck5_vol[i],
1125 0x3f);
1126 }
1127
1128 for (i = 0; i < pdata->num_regulators; i++) {
1129 const struct voltage_map_desc *desc;
1130 int id = pdata->regulators[i].id;
1131
1132 desc = reg_voltage_map[id];
1133 if (desc)
1134 regulators[id].n_voltages =
1135 (desc->max - desc->min) / desc->step + 1;
1136 else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
1137 regulators[id].n_voltages = 4;
1138 else if (id == MAX8997_CHARGER_CV)
1139 regulators[id].n_voltages = 16;
1140
1141 rdev[i] = regulator_register(&regulators[id], max8997->dev,
1142 pdata->regulators[i].initdata, max8997);
1143 if (IS_ERR(rdev[i])) {
1144 ret = PTR_ERR(rdev[i]);
1145 dev_err(max8997->dev, "regulator init failed for %d\n",
1146 id);
1147 rdev[i] = NULL;
1148 goto err;
1149 }
1150 }
1151
1152 /* Misc Settings */
1153 max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
1154 max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
1155
1156 return 0;
1157err:
1158 for (i = 0; i < max8997->num_regulators; i++)
1159 if (rdev[i])
1160 regulator_unregister(rdev[i]);
1161err_alloc:
1162 kfree(max8997->rdev);
1163 kfree(max8997);
1164
1165 return ret;
1166}
1167
1168static int __devexit max8997_pmic_remove(struct platform_device *pdev)
1169{
1170 struct max8997_data *max8997 = platform_get_drvdata(pdev);
1171 struct regulator_dev **rdev = max8997->rdev;
1172 int i;
1173
1174 for (i = 0; i < max8997->num_regulators; i++)
1175 if (rdev[i])
1176 regulator_unregister(rdev[i]);
1177
1178 kfree(max8997->rdev);
1179 kfree(max8997);
1180
1181 return 0;
1182}
1183
1184static const struct platform_device_id max8997_pmic_id[] = {
1185 { "max8997-pmic", 0},
1186 { },
1187};
1188
1189static struct platform_driver max8997_pmic_driver = {
1190 .driver = {
1191 .name = "max8997-pmic",
1192 .owner = THIS_MODULE,
1193 },
1194 .probe = max8997_pmic_probe,
1195 .remove = __devexit_p(max8997_pmic_remove),
1196 .id_table = max8997_pmic_id,
1197};
1198
1199static int __init max8997_pmic_init(void)
1200{
1201 return platform_driver_register(&max8997_pmic_driver);
1202}
1203subsys_initcall(max8997_pmic_init);
1204
1205static void __exit max8997_pmic_cleanup(void)
1206{
1207 platform_driver_unregister(&max8997_pmic_driver);
1208}
1209module_exit(max8997_pmic_cleanup);
1210
1211MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver");
1212MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
1213MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index d0d9136c104b..cb671b3451bf 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -68,6 +68,8 @@ enum max8998_regulators {
68 MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */ 68 MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
69 MAX8997_CHARGER, /* charger current, MBCCTRL4 */ 69 MAX8997_CHARGER, /* charger current, MBCCTRL4 */
70 MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */ 70 MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */
71
72 MAX8997_REG_MAX,
71}; 73};
72 74
73struct max8997_regulator_data { 75struct max8997_regulator_data {
@@ -77,7 +79,31 @@ struct max8997_regulator_data {
77 79
78struct max8997_platform_data { 80struct max8997_platform_data {
79 bool wakeup; 81 bool wakeup;
80 /* PMIC: Not implemented */ 82 /* IRQ: Not implemented */
83 /* ---- PMIC ---- */
84 struct max8997_regulator_data *regulators;
85 int num_regulators;
86
87 /*
88 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
89 * With buckx_gpiodvs enabled, the buckx cannot be controlled
90 * independently. To control buckx (of 1, 2, and 5) independently,
91 * disable buckx_gpiodvs and control with BUCKxDVS1 register.
92 *
93 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
94 * on buckx will change the voltage of bucky at the same time.
95 *
96 */
97 bool ignore_gpiodvs_side_effect;
98 int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
99 int buck125_default_idx; /* Default value of SET1, 2, 3 */
100 unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
101 bool buck1_gpiodvs;
102 unsigned int buck2_voltage[8];
103 bool buck2_gpiodvs;
104 unsigned int buck5_voltage[8];
105 bool buck5_gpiodvs;
106
81 /* MUIC: Not implemented */ 107 /* MUIC: Not implemented */
82 /* HAPTIC: Not implemented */ 108 /* HAPTIC: Not implemented */
83 /* RTC: Not implemented */ 109 /* RTC: Not implemented */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-26 00:00:44 -0500