Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
  ktest: Fix bug when ADD_CONFIG is set but MIN_CONFIG is not
  ktest: Keep fonud configs separate from default configs
  ktest: Add prompt to use OUTPUT_MIN_CONFIG
  ktest: Use Kconfig dependencies to shorten time to make min_config
  ktest: Add test type make_min_config
  ktest: Require one TEST_START in config file
  ktest: Add helper function to avoid duplicate code
  ktest: Add IGNORE_WARNINGS to ignore warnings in some patches
  ktest: Fix tar extracting of modules to target
  ktest: Have the testing tmp dir include machine name
  ktest: Add POST/PRE_BUILD options
  ktest: Allow initrd processing without modules defined
  ktest: Have LOG_FILE evaluate options as well
  ktest: Have wait on stdio honor bug timeout
  ktest: Implement our own force min config
  ktest: Add TEST_NAME option
  ktest: Add CONFIG_BISECT_GOOD option
  ktest: Add detection of triple faults
  ktest: Notify reason to break out of monitoring boot

2 files changed, 963 insertions, 149 deletions

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index cef28e6632b9..8d02ccb10c59 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -27,7 +27,7 @@ $default{"TEST_TYPE"}		= "test";
 $default{"BUILD_TYPE"}          = "randconfig";
 $default{"MAKE_CMD"}            = "make";
 $default{"TIMEOUT"}             = 120;
-$default{"TMP_DIR"}             = "/tmp/ktest";
+$default{"TMP_DIR"}             = "/tmp/ktest/\${MACHINE}";
 $default{"SLEEP_TIME"}          = 60;   # sleep time between tests
 $default{"BUILD_NOCLEAN"}       = 0;
 $default{"REBOOT_ON_ERROR"}     = 0;
@@ -41,6 +41,7 @@ $default{"CLEAR_LOG"}		= 0;
 $default{"BISECT_MANUAL"}       = 0;
 $default{"BISECT_SKIP"}         = 1;
 $default{"SUCCESS_LINE"}        = "login:";
+$default{"DETECT_TRIPLE_FAULT"} = 1;
 $default{"BOOTED_TIMEOUT"}      = 1;
 $default{"DIE_ON_FAILURE"}      = 1;
 $default{"SSH_EXEC"}            = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -62,6 +63,10 @@ my $output_config;
 my $test_type;
 my $build_type;
 my $build_options;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
 my $reboot_type;
 my $reboot_script;
 my $power_cycle;
@@ -81,12 +86,17 @@ my $make;
 my $post_install;
 my $noclean;
 my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $ignore_config;
 my $addconfig;
 my $in_bisect = 0;
 my $bisect_bad = "";
 my $reverse_bisect;
 my $bisect_manual;
 my $bisect_skip;
+my $config_bisect_good;
 my $in_patchcheck = 0;
 my $run_test;
 my $redirect;
@@ -98,9 +108,12 @@ my $monitor_cnt = 0;
 my $sleep_time;
 my $bisect_sleep_time;
 my $patchcheck_sleep_time;
+my $ignore_warnings;
 my $store_failures;
+my $test_name;
 my $timeout;
 my $booted_timeout;
+my $detect_triplefault;
 my $console;
 my $success_line;
 my $stop_after_success;
@@ -115,6 +128,7 @@ my $successes = 0;
 my %entered_configs;
 my %config_help;
 my %variable;
+my %force_config;
 
 $config_help{"MACHINE"} = << "EOF"
  The machine hostname that you will test.
@@ -204,6 +218,26 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF"
 EOF
     ;
 
+sub read_yn {
+    my ($prompt) = @_;
+
+    my $ans;
+
+    for (;;) {
+        print "$prompt [Y/n] ";
+        $ans = <STDIN>;
+        chomp $ans;
+        if ($ans =~ /^\s*$/) {
+            $ans = "y";
+        }
+        last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+        print "Please answer either 'y' or 'n'.\n";
+    }
+    if ($ans !~ /^y$/i) {
+        return 0;
+    }
+    return 1;
+}
 
 sub get_ktest_config {
     my ($config) = @_;
@@ -335,6 +369,7 @@ sub read_config {
     my $num_tests_set = 0;
     my $skip = 0;
     my $rest;
+    my $test_case = 0;
 
     while (<IN>) {
 
@@ -360,6 +395,7 @@ sub read_config {
                 $rest = $1;
                 $skip = 1;
             } else {
+                $test_case = 1;
                 $skip = 0;
             }
 
@@ -464,6 +500,15 @@ sub read_config {
     # make sure we have all mandatory configs
     get_ktest_configs;
 
+    # was a test specified?
+    if (!$test_case) {
+        print "No test case specified.\n";
+        print "What test case would you like to run?\n";
+        my $ans = <STDIN>;
+        chomp $ans;
+        $default{"TEST_TYPE"} = $ans;
+    }
+
     # set any defaults
 
     foreach my $default (keys %default) {
@@ -473,6 +518,69 @@ sub read_config {
     }
 }
 
+sub __eval_option {
+    my ($option, $i) = @_;
+
+    # Add space to evaluate the character before $
+    $option = " $option";
+    my $retval = "";
+
+    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+        my $start = $1;
+        my $var = $2;
+        my $end = $3;
+
+        # Append beginning of line
+        $retval = "$retval$start";
+
+        # If the iteration option OPT[$i] exists, then use that.
+        # otherwise see if the default OPT (without [$i]) exists.
+
+        my $o = "$var\[$i\]";
+
+        if (defined($opt{$o})) {
+            $o = $opt{$o};
+            $retval = "$retval$o";
+        } elsif (defined($opt{$var})) {
+            $o = $opt{$var};
+            $retval = "$retval$o";
+        } else {
+            $retval = "$retval\$\{$var\}";
+        }
+
+        $option = $end;
+    }
+
+    $retval = "$retval$option";
+
+    $retval =~ s/^ //;
+
+    return $retval;
+}
+
+sub eval_option {
+    my ($option, $i) = @_;
+
+    my $prev = "";
+
+    # Since an option can evaluate to another option,
+    # keep iterating until we do not evaluate any more
+    # options.
+    my $r = 0;
+    while ($prev ne $option) {
+        # Check for recursive evaluations.
+        # 100 deep should be more than enough.
+        if ($r++ > 100) {
+            die "Over 100 evaluations accurred with $option\n" .
+                "Check for recursive variables\n";
+        }
+        $prev = $option;
+        $option = __eval_option($option, $i);
+    }
+
+    return $option;
+}
+
 sub _logit {
     if (defined($opt{"LOG_FILE"})) {
         open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
@@ -617,9 +725,15 @@ sub fail {
             end_monitor;
         }
 
+        my $name = "";
+
+        if (defined($test_name)) {
+            $name = " ($test_name)";
+        }
+
         doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
         doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
-        doprint "KTEST RESULT: TEST $i Failed: ", @_, "\n";
+        doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
         doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
         doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
 
@@ -836,17 +950,35 @@ sub monitor {
     my $failure_start;
     my $monitor_start = time;
     my $done = 0;
+    my $version_found = 0;
 
     while (!$done) {
 
-        if ($booted) {
+        if ($bug && defined($stop_after_failure) &&
+            $stop_after_failure >= 0) {
+            my $time = $stop_after_failure - (time - $failure_start);
+            $line = wait_for_input($monitor_fp, $time);
+            if (!defined($line)) {
+                doprint "bug timed out after $booted_timeout seconds\n";
+                doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+                last;
+            }
+        } elsif ($booted) {
             $line = wait_for_input($monitor_fp, $booted_timeout);
+            if (!defined($line)) {
+                my $s = $booted_timeout == 1 ? "" : "s";
+                doprint "Successful boot found: break after $booted_timeout second$s\n";
+                last;
+            }
         } else {
             $line = wait_for_input($monitor_fp);
+            if (!defined($line)) {
+                my $s = $timeout == 1 ? "" : "s";
+                doprint "Timed out after $timeout second$s\n";
+                last;
+            }
         }
 
-        last if (!defined($line));
-
         doprint $line;
         print DMESG $line;
 
@@ -896,6 +1028,22 @@ sub monitor {
             $bug = 1;
         }
 
+        # Detect triple faults by testing the banner
+        if ($full_line =~ /\bLinux version (\S+).*\n/) {
+            if ($1 eq $version) {
+                $version_found = 1;
+            } elsif ($version_found && $detect_triplefault) {
+                # We already booted into the kernel we are testing,
+                # but now we booted into another kernel?
+                # Consider this a triple fault.
+                doprint "Aleady booted in Linux kernel $version, but now\n";
+                doprint "we booted into Linux kernel $1.\n";
+                doprint "Assuming that this is a triple fault.\n";
+                doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+                last;
+            }
+        }
+
         if ($line =~ /\n/) {
             $full_line = "";
         }
@@ -923,6 +1071,16 @@ sub monitor {
     return 1;
 }
 
+sub do_post_install {
+
+    return if (!defined($post_install));
+
+    my $cp_post_install = $post_install;
+    $cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
+    run_command "$cp_post_install" or
+        dodie "Failed to run post install";
+}
+
 sub install {
 
     run_scp "$outputdir/$build_target", "$target_image" or
@@ -942,6 +1100,7 @@ sub install {
     close(IN);
 
     if (!$install_mods) {
+        do_post_install;
         doprint "No modules needed\n";
         return;
     }
@@ -964,17 +1123,29 @@ sub install {
 
     unlink "$tmpdir/$modtar";
 
-    run_ssh "'(cd / && tar xf /tmp/$modtar)'" or
+    run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
         dodie "failed to tar modules";
 
     run_ssh "rm -f /tmp/$modtar";
 
-    return if (!defined($post_install));
+    do_post_install;
+}
 
-    my $cp_post_install = $post_install;
-    $cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
-    run_command "$cp_post_install" or
-        dodie "Failed to run post install";
+sub get_version {
+    # get the release name
+    doprint "$make kernelrelease ... ";
+    $version = `$make kernelrelease | tail -1`;
+    chomp($version);
+    doprint "$version\n";
+}
+
+sub start_monitor_and_boot {
+    get_grub_index;
+    get_version;
+    install;
+
+    start_monitor;
+    return monitor;
 }
 
 sub check_buildlog {
@@ -1009,24 +1180,84 @@ sub check_buildlog {
     return 1;
 }
 
+sub apply_min_config {
+    my $outconfig = "$output_config.new";
+
+    # Read the config file and remove anything that
+    # is in the force_config hash (from minconfig and others)
+    # then add the force config back.
+
+    doprint "Applying minimum configurations into $output_config.new\n";
+
+    open (OUT, ">$outconfig") or
+        dodie "Can't create $outconfig";
+
+    if (-f $output_config) {
+        open (IN, $output_config) or
+            dodie "Failed to open $output_config";
+        while (<IN>) {
+            if (/^(# )?(CONFIG_[^\s=]*)/) {
+                next if (defined($force_config{$2}));
+            }
+            print OUT;
+        }
+        close IN;
+    }
+    foreach my $config (keys %force_config) {
+        print OUT "$force_config{$config}\n";
+    }
+    close OUT;
+
+    run_command "mv $outconfig $output_config";
+}
+
 sub make_oldconfig {
-    my ($defconfig) = @_;
 
-    if (!run_command "$defconfig $make oldnoconfig") {
+    my @force_list = keys %force_config;
+
+    if ($#force_list >= 0) {
+        apply_min_config;
+    }
+
+    if (!run_command "$make oldnoconfig") {
         # Perhaps oldnoconfig doesn't exist in this version of the kernel
         # try a yes '' | oldconfig
         doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
-        run_command "yes '' | $defconfig $make oldconfig" or
+        run_command "yes '' | $make oldconfig" or
             dodie "failed make config oldconfig";
     }
 }
 
+# read a config file and use this to force new configs.
+sub load_force_config {
+    my ($config) = @_;
+
+    open(IN, $config) or
+        dodie "failed to read $config";
+    while (<IN>) {
+        chomp;
+        if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+            $force_config{$1} = $_;
+        } elsif (/^# (CONFIG_\S*) is not set/) {
+            $force_config{$1} = $_;
+        }
+    }
+    close IN;
+}
+
 sub build {
     my ($type) = @_;
-    my $defconfig = "";
 
     unlink $buildlog;
 
+    if (defined($pre_build)) {
+        my $ret = run_command $pre_build;
+        if (!$ret && defined($pre_build_die) &&
+            $pre_build_die) {
+            dodie "failed to pre_build\n";
+        }
+    }
+
     if ($type =~ /^useconfig:(.*)/) {
         run_command "cp $1 $output_config" or
             dodie "could not copy $1 to .config";
@@ -1063,24 +1294,33 @@ sub build {
     close(OUT);
 
     if (defined($minconfig)) {
-        $defconfig = "KCONFIG_ALLCONFIG=$minconfig";
+        load_force_config($minconfig);
     }
 
-    if ($type eq "oldnoconfig") {
-        make_oldconfig $defconfig;
-    } else {
-        run_command "$defconfig $make $type" or
+    if ($type ne "oldnoconfig") {
+        run_command "$make $type" or
             dodie "failed make config";
     }
+    # Run old config regardless, to enforce min configurations
+    make_oldconfig;
 
     $redirect = "$buildlog";
-    if (!run_command "$make $build_options") {
-        undef $redirect;
+    my $build_ret = run_command "$make $build_options";
+    undef $redirect;
+
+    if (defined($post_build)) {
+        my $ret = run_command $post_build;
+        if (!$ret && defined($post_build_die) &&
+            $post_build_die) {
+            dodie "failed to post_build\n";
+        }
+    }
+
+    if (!$build_ret) {
         # bisect may need this to pass
         return 0 if ($in_bisect);
         fail "failed build" and return 0;
     }
-    undef $redirect;
 
     return 1;
 }
@@ -1102,9 +1342,15 @@ sub success {
 
     $successes++;
 
+    my $name = "";
+
+    if (defined($test_name)) {
+        $name = " ($test_name)";
+    }
+
     doprint "\n\n*******************************************\n";
     doprint     "*******************************************\n";
-    doprint     "KTEST RESULT: TEST $i SUCCESS!!!!         **\n";
+    doprint     "KTEST RESULT: TEST $i$name SUCCESS!!!!         **\n";
     doprint     "*******************************************\n";
     doprint     "*******************************************\n";
 
@@ -1117,14 +1363,6 @@ sub success {
     }
 }
 
-sub get_version {
-    # get the release name
-    doprint "$make kernelrelease ... ";
-    $version = `$make kernelrelease | tail -1`;
-    chomp($version);
-    doprint "$version\n";
-}
-
 sub answer_bisect {
     for (;;) {
         doprint "Pass or fail? [p/f]";
@@ -1289,12 +1527,7 @@ sub run_bisect_test {
         dodie "Failed on build" if $failed;
 
         # Now boot the box
-        get_grub_index;
-        get_version;
-        install;
-
-        start_monitor;
-        monitor or $failed = 1;
+        start_monitor_and_boot or $failed = 1;
 
         if ($type ne "boot") {
             if ($failed && $bisect_skip) {
@@ -1473,21 +1706,27 @@ my %null_config;
 
 my %dependency;
 
-sub process_config_ignore {
-    my ($config) = @_;
+sub assign_configs {
+    my ($hash, $config) = @_;
 
     open (IN, $config)
         or dodie "Failed to read $config";
 
     while (<IN>) {
         if (/^((CONFIG\S*)=.*)/) {
-            $config_ignore{$2} = $1;
+            ${$hash}{$2} = $1;
         }
     }
 
     close(IN);
 }
 
+sub process_config_ignore {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
 sub read_current_config {
     my ($config_ref) = @_;
 
@@ -1546,7 +1785,7 @@ sub create_config {
     close(OUT);
 
 #    exit;
-    make_oldconfig "";
+    make_oldconfig;
 }
 
 sub compare_configs {
@@ -1718,6 +1957,10 @@ sub config_bisect {
 
     my $tmpconfig = "$tmpdir/use_config";
 
+    if (defined($config_bisect_good)) {
+        process_config_ignore $config_bisect_good;
+    }
+
     # Make the file with the bad config and the min config
     if (defined($minconfig)) {
         # read the min config for things to ignore
@@ -1727,15 +1970,8 @@ sub config_bisect {
         unlink $tmpconfig;
     }
 
-    # Add other configs
-    if (defined($addconfig)) {
-        run_command "cat $addconfig >> $tmpconfig" or
-            dodie "failed to append $addconfig";
-    }
-
-    my $defconfig = "";
     if (-f $tmpconfig) {
-        $defconfig = "KCONFIG_ALLCONFIG=$tmpconfig";
+        load_force_config($tmpconfig);
         process_config_ignore $tmpconfig;
     }
 
@@ -1755,8 +1991,8 @@ sub config_bisect {
     }
     close(IN);
 
-    # Now run oldconfig with the minconfig (and addconfigs)
-    make_oldconfig $defconfig;
+    # Now run oldconfig with the minconfig
+    make_oldconfig;
 
     # check to see what we lost (or gained)
     open (IN, $output_config)
@@ -1882,6 +2118,13 @@ sub patchcheck {
     @list = reverse @list;
 
     my $save_clean = $noclean;
+    my %ignored_warnings;
+
+    if (defined($ignore_warnings)) {
+        foreach my $sha1 (split /\s+/, $ignore_warnings) {
+            $ignored_warnings{$sha1} = 1;
+        }
+    }
 
     $in_patchcheck = 1;
     foreach my $item (@list) {
@@ -1908,18 +2151,16 @@ sub patchcheck {
             build "oldconfig" or return 0;
         }
 
-        check_buildlog $sha1 or return 0;
 
-        next if ($type eq "build");
+        if (!defined($ignored_warnings{$sha1})) {
+            check_buildlog $sha1 or return 0;
+        }
 
-        get_grub_index;
-        get_version;
-        install;
+        next if ($type eq "build");
 
         my $failed = 0;
 
-        start_monitor;
-        monitor or $failed = 1;
+        start_monitor_and_boot or $failed = 1;
 
         if (!$failed && $type ne "boot"){
             do_run_test or $failed = 1;
@@ -1936,24 +2177,505 @@ sub patchcheck {
     return 1;
 }
 
+my %depends;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+# taken from streamline_config.pl
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+    my @kconfigs;
+
+    my $cont = 0;
+    my $line;
+
+
+    if (! -f $kconfig) {
+        doprint "file $kconfig does not exist, skipping\n";
+        return;
+    }
+
+    open(KIN, "$kconfig")
+        or die "Can't open $kconfig";
+    while (<KIN>) {
+        chomp;
+
+        # Make sure that lines ending with \ continue
+        if ($cont) {
+            $_ = $line . " " . $_;
+        }
+
+        if (s/\\$//) {
+            $cont = 1;
+            $line = $_;
+            next;
+        }
+
+        $cont = 0;
+
+        # collect any Kconfig sources
+        if (/^source\s*"(.*)"/) {
+            $kconfigs[$#kconfigs+1] = $1;
+        }
+
+        # configs found
+        if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+            $state = "NEW";
+            $config = $2;
+
+            for (my $i = 0; $i < $iflevel; $i++) {
+                if ($i) {
+                    $depends{$config} .= " " . $ifdeps[$i];
+                } else {
+                    $depends{$config} = $ifdeps[$i];
+                }
+                $state = "DEP";
+            }
+
+        # collect the depends for the config
+        } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+            if (defined($depends{$1})) {
+                $depends{$config} .= " " . $1;
+            } else {
+                $depends{$config} = $1;
+            }
+
+        # Get the configs that select this config
+        } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
+            if (defined($depends{$1})) {
+                $depends{$1} .= " " . $config;
+            } else {
+                $depends{$1} = $config;
+            }
+
+        # Check for if statements
+        } elsif (/^if\s+(.*\S)\s*$/) {
+            my $deps = $1;
+            # remove beginning and ending non text
+            $deps =~ s/^[^a-zA-Z0-9_]*//;
+            $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+            my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+            $ifdeps[$iflevel++] = join ':', @deps;
+
+        } elsif (/^endif/) {
+
+            $iflevel-- if ($iflevel);
+
+        # stop on "help"
+        } elsif (/^\s*help\s*$/) {
+            $state = "NONE";
+        }
+    }
+    close(KIN);
+
+    # read in any configs that were found.
+    foreach $kconfig (@kconfigs) {
+        if (!defined($read_kconfigs{$kconfig})) {
+            $read_kconfigs{$kconfig} = 1;
+            read_kconfig("$builddir/$kconfig");
+        }
+    }
+}
+
+sub read_depends {
+    # find out which arch this is by the kconfig file
+    open (IN, $output_config)
+        or dodie "Failed to read $output_config";
+    my $arch;
+    while (<IN>) {
+        if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+            $arch = $1;
+            last;
+        }
+    }
+    close IN;
+
+    if (!defined($arch)) {
+        doprint "Could not find arch from config file\n";
+        doprint "no dependencies used\n";
+        return;
+    }
+
+    # arch is really the subarch, we need to know
+    # what directory to look at.
+    if ($arch eq "i386" || $arch eq "x86_64") {
+        $arch = "x86";
+    } elsif ($arch =~ /^tile/) {
+        $arch = "tile";
+    }
+
+    my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+    if (! -f $kconfig && $arch =~ /\d$/) {
+        my $orig = $arch;
+        # some subarchs have numbers, truncate them
+        $arch =~ s/\d*$//;
+        $kconfig = "$builddir/arch/$arch/Kconfig";
+        if (! -f $kconfig) {
+            doprint "No idea what arch dir $orig is for\n";
+            doprint "no dependencies used\n";
+            return;
+        }
+    }
+
+    read_kconfig($kconfig);
+}
+
+sub read_config_list {
+    my ($config) = @_;
+
+    open (IN, $config)
+        or dodie "Failed to read $config";
+
+    while (<IN>) {
+        if (/^((CONFIG\S*)=.*)/) {
+            if (!defined($config_ignore{$2})) {
+                $config_list{$2} = $1;
+            }
+        }
+    }
+
+    close(IN);
+}
+
+sub read_output_config {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
+sub make_new_config {
+    my @configs = @_;
+
+    open (OUT, ">$output_config")
+        or dodie "Failed to write $output_config";
+
+    foreach my $config (@configs) {
+        print OUT "$config\n";
+    }
+    close OUT;
+}
+
+sub get_depends {
+    my ($dep) = @_;
+
+    my $kconfig = $dep;
+    $kconfig =~ s/CONFIG_//;
+
+    $dep = $depends{"$kconfig"};
+
+    # the dep string we have saves the dependencies as they
+    # were found, including expressions like ! && ||. We
+    # want to split this out into just an array of configs.
+
+    my $valid = "A-Za-z_0-9";
+
+    my @configs;
+
+    while ($dep =~ /[$valid]/) {
+
+        if ($dep =~ /^[^$valid]*([$valid]+)/) {
+            my $conf = "CONFIG_" . $1;
+
+            $configs[$#configs + 1] = $conf;
+
+            $dep =~ s/^[^$valid]*[$valid]+//;
+        } else {
+            die "this should never happen";
+        }
+    }
+
+    return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+    my ($config) = @_;
+
+    my $found;
+
+    # if we already processed this config, skip it
+    if (defined($processed_configs{$config})) {
+        return undef;
+    }
+    $processed_configs{$config} = 1;
+
+    # if this config failed during this round, skip it
+    if (defined($nochange_config{$config})) {
+        return undef;
+    }
+
+    my $kconfig = $config;
+    $kconfig =~ s/CONFIG_//;
+
+    # Test dependencies first
+    if (defined($depends{"$kconfig"})) {
+        my @parents = get_depends $config;
+        foreach my $parent (@parents) {
+            # if the parent is in the min config, check it first
+            next if (!defined($min_configs{$parent}));
+            $found = test_this_config($parent);
+            if (defined($found)) {
+                return $found;
+            }
+        }
+    }
+
+    # Remove this config from the list of configs
+    # do a make oldnoconfig and then read the resulting
+    # .config to make sure it is missing the config that
+    # we had before
+    my %configs = %min_configs;
+    delete $configs{$config};
+    make_new_config ((values %configs), (values %keep_configs));
+    make_oldconfig;
+    undef %configs;
+    assign_configs \%configs, $output_config;
+
+    return $config if (!defined($configs{$config}));
+
+    doprint "disabling config $config did not change .config\n";
+
+    $nochange_config{$config} = 1;
+
+    return undef;
+}
+
+sub make_min_config {
+    my ($i) = @_;
+
+    if (!defined($output_minconfig)) {
+        fail "OUTPUT_MIN_CONFIG not defined" and return;
+    }
+
+    # If output_minconfig exists, and the start_minconfig
+    # came from min_config, than ask if we should use
+    # that instead.
+    if (-f $output_minconfig && !$start_minconfig_defined) {
+        print "$output_minconfig exists\n";
+        if (read_yn " Use it as minconfig?") {
+            $start_minconfig = $output_minconfig;
+        }
+    }
+
+    if (!defined($start_minconfig)) {
+        fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+    }
+
+    my $temp_config = "$tmpdir/temp_config";
+
+    # First things first. We build an allnoconfig to find
+    # out what the defaults are that we can't touch.
+    # Some are selections, but we really can't handle selections.
+
+    my $save_minconfig = $minconfig;
+    undef $minconfig;
+
+    run_command "$make allnoconfig" or return 0;
+
+    read_depends;
+
+    process_config_ignore $output_config;
+
+    undef %save_configs;
+    undef %min_configs;
+
+    if (defined($ignore_config)) {
+        # make sure the file exists
+        `touch $ignore_config`;
+        assign_configs \%save_configs, $ignore_config;
+    }
+
+    %keep_configs = %save_configs;
+
+    doprint "Load initial configs from $start_minconfig\n";
+
+    # Look at the current min configs, and save off all the
+    # ones that were set via the allnoconfig
+    assign_configs \%min_configs, $start_minconfig;
+
+    my @config_keys = keys %min_configs;
+
+    # Remove anything that was set by the make allnoconfig
+    # we shouldn't need them as they get set for us anyway.
+    foreach my $config (@config_keys) {
+        # Remove anything in the ignore_config
+        if (defined($keep_configs{$config})) {
+            my $file = $ignore_config;
+            $file =~ s,.*/(.*?)$,$1,;
+            doprint "$config set by $file ... ignored\n";
+            delete $min_configs{$config};
+            next;
+        }
+        # But make sure the settings are the same. If a min config
+        # sets a selection, we do not want to get rid of it if
+        # it is not the same as what we have. Just move it into
+        # the keep configs.
+        if (defined($config_ignore{$config})) {
+            if ($config_ignore{$config} ne $min_configs{$config}) {
+                doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+                doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+                $keep_configs{$config} = $min_configs{$config};
+            } else {
+                doprint "$config set by allnoconfig ... ignored\n";
+            }
+            delete $min_configs{$config};
+        }
+    }
+
+    my $done = 0;
+    my $take_two = 0;
+
+    while (!$done) {
+
+        my $config;
+        my $found;
+
+        # Now disable each config one by one and do a make oldconfig
+        # till we find a config that changes our list.
+
+        # Put configs that did not modify the config at the end.
+        my @test_configs = keys %min_configs;
+        my $reset = 1;
+        for (my $i = 0; $i < $#test_configs; $i++) {
+            if (!defined($nochange_config{$test_configs[0]})) {
+                $reset = 0;
+                last;
+            }
+            # This config didn't change the .config last time.
+            # Place it at the end
+            my $config = shift @test_configs;
+            push @test_configs, $config;
+        }
+
+        # if every test config has failed to modify the .config file
+        # in the past, then reset and start over.
+        if ($reset) {
+            undef %nochange_config;
+        }
+
+        undef %processed_configs;
+
+        foreach my $config (@test_configs) {
+
+            $found = test_this_config $config;
+
+            last if (defined($found));
+
+            # oh well, try another config
+        }
+
+        if (!defined($found)) {
+            # we could have failed due to the nochange_config hash
+            # reset and try again
+            if (!$take_two) {
+                undef %nochange_config;
+                $take_two = 1;
+                next;
+            }
+            doprint "No more configs found that we can disable\n";
+            $done = 1;
+            last;
+        }
+        $take_two = 0;
+
+        $config = $found;
+
+        doprint "Test with $config disabled\n";
+
+        # set in_bisect to keep build and monitor from dieing
+        $in_bisect = 1;
+
+        my $failed = 0;
+        build "oldconfig";
+        start_monitor_and_boot or $failed = 1;
+        end_monitor;
+
+        $in_bisect = 0;
+
+        if ($failed) {
+            doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+            # this config is needed, add it to the ignore list.
+            $keep_configs{$config} = $min_configs{$config};
+            $save_configs{$config} = $min_configs{$config};
+            delete $min_configs{$config};
+
+            # update new ignore configs
+            if (defined($ignore_config)) {
+                open (OUT, ">$temp_config")
+                    or die "Can't write to $temp_config";
+                foreach my $config (keys %save_configs) {
+                    print OUT "$save_configs{$config}\n";
+                }
+                close OUT;
+                run_command "mv $temp_config $ignore_config" or
+                    dodie "failed to copy update to $ignore_config";
+            }
+
+        } else {
+            # We booted without this config, remove it from the minconfigs.
+            doprint "$config is not needed, disabling\n";
+
+            delete $min_configs{$config};
+
+            # Also disable anything that is not enabled in this config
+            my %configs;
+            assign_configs \%configs, $output_config;
+            my @config_keys = keys %min_configs;
+            foreach my $config (@config_keys) {
+                if (!defined($configs{$config})) {
+                    doprint "$config is not set, disabling\n";
+                    delete $min_configs{$config};
+                }
+            }
+
+            # Save off all the current mandidory configs
+            open (OUT, ">$temp_config")
+                or die "Can't write to $temp_config";
+            foreach my $config (keys %keep_configs) {
+                print OUT "$keep_configs{$config}\n";
+            }
+            foreach my $config (keys %min_configs) {
+                print OUT "$min_configs{$config}\n";
+            }
+            close OUT;
+
+            run_command "mv $temp_config $output_minconfig" or
+                dodie "failed to copy update to $output_minconfig";
+        }
+
+        doprint "Reboot and wait $sleep_time seconds\n";
+        reboot;
+        start_monitor;
+        wait_for_monitor $sleep_time;
+        end_monitor;
+    }
+
+    success $i;
+    return 1;
+}
+
 $#ARGV < 1 or die "ktest.pl version: $VERSION\n   usage: ktest.pl config-file\n";
 
 if ($#ARGV == 0) {
     $ktest_config = $ARGV[0];
     if (! -f $ktest_config) {
         print "$ktest_config does not exist.\n";
-        my $ans;
-        for (;;) {
-            print "Create it? [Y/n] ";
-            $ans = <STDIN>;
-            chomp $ans;
-            if ($ans =~ /^\s*$/) {
-                $ans = "y";
-            }
-            last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
-            print "Please answer either 'y' or 'n'.\n";
-        }
-        if ($ans !~ /^y$/i) {
+        if (!read_yn "Create it?") {
             exit 0;
         }
     }
@@ -1977,6 +2699,10 @@ EOF
 }
 read_config $ktest_config;
 
+if (defined($opt{"LOG_FILE"})) {
+    $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1);
+}
+
 # Append any configs entered in manually to the config file.
 my @new_configs = keys %entered_configs;
 if ($#new_configs >= 0) {
@@ -2045,70 +2771,13 @@ sub __set_test_option {
     return undef;
 }
 
-sub eval_option {
-    my ($option, $i) = @_;
-
-    # Add space to evaluate the character before $
-    $option = " $option";
-    my $retval = "";
-
-    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
-        my $start = $1;
-        my $var = $2;
-        my $end = $3;
-
-        # Append beginning of line
-        $retval = "$retval$start";
-
-        # If the iteration option OPT[$i] exists, then use that.
-        # otherwise see if the default OPT (without [$i]) exists.
-
-        my $o = "$var\[$i\]";
-
-        if (defined($opt{$o})) {
-            $o = $opt{$o};
-            $retval = "$retval$o";
-        } elsif (defined($opt{$var})) {
-            $o = $opt{$var};
-            $retval = "$retval$o";
-        } else {
-            $retval = "$retval\$\{$var\}";
-        }
-
-        $option = $end;
-    }
-
-    $retval = "$retval$option";
-
-    $retval =~ s/^ //;
-
-    return $retval;
-}
-
 sub set_test_option {
     my ($name, $i) = @_;
 
     my $option = __set_test_option($name, $i);
     return $option if (!defined($option));
 
-    my $prev = "";
-
-    # Since an option can evaluate to another option,
-    # keep iterating until we do not evaluate any more
-    # options.
-    my $r = 0;
-    while ($prev ne $option) {
-        # Check for recursive evaluations.
-        # 100 deep should be more than enough.
-        if ($r++ > 100) {
-            die "Over 100 evaluations accurred with $name\n" .
-                "Check for recursive variables\n";
-        }
-        $prev = $option;
-        $option = eval_option($option, $i);
-    }
-
-    return $option;
+    return eval_option($option, $i);
 }
 
 # First we need to do is the builds
@@ -2126,10 +2795,17 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $test_type = set_test_option("TEST_TYPE", $i);
     $build_type = set_test_option("BUILD_TYPE", $i);
     $build_options = set_test_option("BUILD_OPTIONS", $i);
+    $pre_build = set_test_option("PRE_BUILD", $i);
+    $post_build = set_test_option("POST_BUILD", $i);
+    $pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
+    $post_build_die = set_test_option("POST_BUILD_DIE", $i);
     $power_cycle = set_test_option("POWER_CYCLE", $i);
     $reboot = set_test_option("REBOOT", $i);
     $noclean = set_test_option("BUILD_NOCLEAN", $i);
     $minconfig = set_test_option("MIN_CONFIG", $i);
+    $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
+    $start_minconfig = set_test_option("START_MIN_CONFIG", $i);
+    $ignore_config = set_test_option("IGNORE_CONFIG", $i);
     $run_test = set_test_option("TEST", $i);
     $addconfig = set_test_option("ADD_CONFIG", $i);
     $reboot_type = set_test_option("REBOOT_TYPE", $i);
@@ -2145,12 +2821,16 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $sleep_time = set_test_option("SLEEP_TIME", $i);
     $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
     $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i);
+    $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i);
     $bisect_manual = set_test_option("BISECT_MANUAL", $i);
     $bisect_skip = set_test_option("BISECT_SKIP", $i);
+    $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i);
     $store_failures = set_test_option("STORE_FAILURES", $i);
+    $test_name = set_test_option("TEST_NAME", $i);
     $timeout = set_test_option("TIMEOUT", $i);
     $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
     $console = set_test_option("CONSOLE", $i);
+    $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
     $success_line = set_test_option("SUCCESS_LINE", $i);
     $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
     $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
@@ -2161,6 +2841,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $target_image = set_test_option("TARGET_IMAGE", $i);
     $localversion = set_test_option("LOCALVERSION", $i);
 
+    $start_minconfig_defined = 1;
+
+    if (!defined($start_minconfig)) {
+        $start_minconfig_defined = 0;
+        $start_minconfig = $minconfig;
+    }
+
     chdir $builddir || die "can't change directory to $builddir";
 
     if (!-d $tmpdir) {
@@ -2193,6 +2880,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
         $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
     }
 
+    if ($test_type eq "make_min_config") {
+        $run_type = "";
+    }
+
     # mistake in config file?
     if (!defined($run_type)) {
         $run_type = "ERROR";
@@ -2204,11 +2895,12 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     unlink $dmesg;
     unlink $buildlog;
 
-    if (!defined($minconfig)) {
-        $minconfig = $addconfig;
-
-    } elsif (defined($addconfig)) {
-        run_command "cat $addconfig $minconfig > $tmpdir/add_config" or
+    if (defined($addconfig)) {
+        my $min = $minconfig;
+        if (!defined($minconfig)) {
+            $min = "";
+        }
+        run_command "cat $addconfig $min > $tmpdir/add_config" or
             dodie "Failed to create temp config";
         $minconfig = "$tmpdir/add_config";
     }
@@ -2228,6 +2920,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     } elsif ($test_type eq "patchcheck") {
         patchcheck $i;
         next;
+    } elsif ($test_type eq "make_min_config") {
+        make_min_config $i;
+        next;
     }
 
     if ($build_type ne "nobuild") {
@@ -2235,13 +2930,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     }
 
     if ($test_type ne "build") {
-        get_grub_index;
-        get_version;
-        install;
-
         my $failed = 0;
-        start_monitor;
-        monitor or $failed = 1;;
+        start_monitor_and_boot or $failed = 1;
 
         if (!$failed && $test_type ne "boot" && defined($run_test)) {
             do_run_test or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 48cbcc80602a..b8bcd14b5a4d 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -293,6 +293,38 @@
 # or on some systems:
 #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
 
+# If there is a script that you require to run before the build is done
+# you can specify it with PRE_BUILD.
+#
+# One example may be if you must add a temporary patch to the build to
+# fix a unrelated bug to perform a patchcheck test. This will apply the
+# patch before each build that is made. Use the POST_BUILD to do a git reset --hard
+# to remove the patch.
+#
+# (default undef)
+#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch
+
+# To specify if the test should fail if the PRE_BUILD fails,
+# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD
+# result is ignored.
+# (default 0)
+# PRE_BUILD_DIE = 1
+
+# If there is a script that should run after the build is done
+# you can specify it with POST_BUILD.
+#
+# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications
+# made by the PRE_BUILD.
+#
+# (default undef)
+#POST_BUILD = cd ${BUILD_DIR} && git reset --hard
+
+# To specify if the test should fail if the POST_BUILD fails,
+# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD
+# result is ignored.
+# (default 0)
+#POST_BUILD_DIE = 1
+
 # Way to reboot the box to the test kernel.
 # Only valid options so far are "grub" and "script"
 # (default grub)
@@ -360,8 +392,8 @@
 #ADD_CONFIG = /home/test/config-broken
 
 # The location on the host where to write temp files
-# (default /tmp/ktest)
-#TMP_DIR = /tmp/ktest
+# (default /tmp/ktest/${MACHINE})
+#TMP_DIR = /tmp/ktest/${MACHINE}
 
 # Optional log file to write the status (recommended)
 #  Note, this is a DEFAULT section only option.
@@ -518,6 +550,16 @@
 # The variables SSH_USER and MACHINE are defined.
 #REBOOT = ssh $SSH_USER@$MACHINE reboot
 
+# The way triple faults are detected is by testing the kernel
+# banner. If the kernel banner for the kernel we are testing is
+# found, and then later a kernel banner for another kernel version
+# is found, it is considered that we encountered a triple fault,
+# and there is no panic or callback, but simply a reboot.
+# To disable this (because it did a false positive) set the following
+# to 0.
+# (default 1)
+#DETECT_TRIPLE_FAULT = 0
+
 #### Per test run options ####
 # The following options are only allowed in TEST_START sections.
 # They are ignored in the DEFAULTS sections.
@@ -535,6 +577,12 @@
 #  all preceding tests until a new CHECKOUT is set.
 #
 #
+# TEST_NAME = name
+#
+#  If you want the test to have a name that is displayed in
+#  the test result banner at the end of the test, then use this
+#  option. This is useful to search for the RESULT keyword and
+#  not have to translate a test number to a test in the config.
 #
 # For TEST_TYPE = patchcheck
 #
@@ -556,7 +604,12 @@
 #      build, boot, test.
 #
 #   Note, the build test will look for warnings, if a warning occurred
-#     in a file that a commit touches, the build will fail.
+#     in a file that a commit touches, the build will fail, unless
+#     IGNORE_WARNINGS is set for the given commit's sha1
+#
+#   IGNORE_WARNINGS can be used to disable the failure of patchcheck
+#     on a particuler commit (SHA1). You can add more than one commit
+#     by adding a list of SHA1s that are space delimited.
 #
 #   If BUILD_NOCLEAN is set, then make mrproper will not be run on
 #   any of the builds, just like all other TEST_TYPE tests. But
@@ -571,6 +624,7 @@
 #   PATCHCHECK_TYPE = boot
 #   PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
 #   PATCHCHECK_END = HEAD~2
+#   IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128
 #
 #
 #
@@ -739,13 +793,18 @@
 #       boot    - bad builds but fails to boot
 #       test    - bad boots but fails a test
 #
-#   CONFIG_BISECT is the config that failed to boot
+#  CONFIG_BISECT is the config that failed to boot
 #
-#   If BISECT_MANUAL is set, it will pause between iterations.
-#   This is useful to use just ktest.pl just for the config bisect.
-#   If you set it to build, it will run the bisect and you can
-#   control what happens in between iterations. It will ask you if
-#   the test succeeded or not and continue the config bisect.
+#  If BISECT_MANUAL is set, it will pause between iterations.
+#  This is useful to use just ktest.pl just for the config bisect.
+#  If you set it to build, it will run the bisect and you can
+#  control what happens in between iterations. It will ask you if
+#  the test succeeded or not and continue the config bisect.
+#
+# CONFIG_BISECT_GOOD (optional)
+#  If you have a good config to start with, then you
+#  can specify it with CONFIG_BISECT_GOOD. Otherwise
+#  the MIN_CONFIG is the base.
 #
 # Example:
 #   TEST_START
@@ -755,3 +814,68 @@
 #   MIN_CONFIG = /home/test/config-min
 #   BISECT_MANUAL = 1
 #
+#
+#
+# For TEST_TYPE = make_min_config
+#
+#  After doing a make localyesconfig, your kernel configuration may
+#  not be the most useful minimum configuration. Having a true minimum
+#  config that you can use against other configs is very useful if
+#  someone else has a config that breaks on your code. By only forcing
+#  those configurations that are truly required to boot your machine
+#  will give you less of a chance that one of your set configurations
+#  will make the bug go away. This will give you a better chance to
+#  be able to reproduce the reported bug matching the broken config.
+#
+#  Note, this does take some time, and may require you to run the
+#  test over night, or perhaps over the weekend. But it also allows
+#  you to interrupt it, and gives you the current minimum config
+#  that was found till that time.
+#
+#  Note, this test automatically assumes a BUILD_TYPE of oldconfig
+#  and its test type acts like boot.
+#  TODO: add a test version that makes the config do more than just
+#   boot, like having network access.
+#
+#  To save time, the test does not just grab any option and test
+#  it. The Kconfig files are examined to determine the dependencies
+#  of the configs. If a config is chosen that depends on another
+#  config, that config will be checked first. By checking the
+#  parents first, we can eliminate whole groups of configs that
+#  may have been enabled.
+#
+#  For example, if a USB device config is chosen and depends on CONFIG_USB,
+#  the CONFIG_USB will be tested before the device. If CONFIG_USB is
+#  found not to be needed, it, as well as all configs that depend on
+#  it, will be disabled and removed from the current min_config.
+#
+#  OUTPUT_MIN_CONFIG is the path and filename of the file that will
+#   be created from the MIN_CONFIG. If you interrupt the test, set
+#   this file as your new min config, and use it to continue the test.
+#   This file does not need to exist on start of test.
+#   This file is not created until a config is found that can be removed.
+#   If this file exists, you will be prompted if you want to use it
+#   as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG
+#   is not defined.
+#   (required field)
+#
+#  START_MIN_CONFIG is the config to use to start the test with.
+#   you can set this as the same OUTPUT_MIN_CONFIG, but if you do
+#   the OUTPUT_MIN_CONFIG file must exist.
+#   (default MIN_CONFIG)
+#
+#  IGNORE_CONFIG is used to specify a config file that has configs that
+#   you already know must be set. Configs are written here that have
+#   been tested and proved to be required. It is best to define this
+#   file if you intend on interrupting the test and running it where
+#   it left off. New configs that it finds will be written to this file
+#   and will not be tested again in later runs.
+#   (optional)
+#
+# Example:
+#
+#  TEST_TYPE = make_min_config
+#  OUTPUT_MIN_CONFIG = /path/to/config-new-min
+#  START_MIN_CONFIG = /path/to/config-min
+#  IGNORE_CONFIG = /path/to/config-tested
+#