ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios

GPIO3_29 is used to reset the ethernet phy.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 2 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index df42d3ccb70e..35f547929167 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -88,6 +88,7 @@
                                 MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
                                 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+                                MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x80000000
                         >;
                 };
         };
@@ -97,6 +98,7 @@
         pinctrl-names = "default";
         pinctrl-0 = <&pinctrl_enet_1>;
         phy-mode = "rgmii";
+        phy-reset-gpios = <&gpio3 29 0>;
         status = "okay";
 };