[PATCH] USB Serial: move old changelog comments out of source code

Create a new file just for these things, as they just get in the
way in the source files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 736 insertions, 720 deletions

diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old
new file mode 100644
index 000000000000..c1b279939bbf
--- /dev/null
+++ b/drivers/usb/serial/ChangeLog.old
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had  old
+changelog comments.  They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+        removed the port->tty check from port_paranoia_check() due to serial
+        consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+        removed active from the port structure.
+        added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+        added vendor and product to serial structure.  Needed to determine device
+        owner when the device is disconnected.
+
+ (05/30/2001) gkh
+        added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+        Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+        fix bug with urb->dev not being set properly, now that the usb core
+        needs it.
+
+ (09/11/2000) gkh
+        Added usb_serial_debug_data function to help get rid of #DEBUG in the
+        drivers.
+
+ (08/28/2000) gkh
+        Added port_lock to port structure.
+
+ (08/08/2000) gkh
+        Added open_count to port structure.
+
+ (07/23/2000) gkh
+        Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+        Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+        Split the ports off into their own struct device, and added a
+        usb-serial bus driver.
+
+ (11/19/2002) gkh
+        removed a few #ifdefs for the generic code and cleaned up the failure
+        logic in initialization.
+
+ (10/02/2002) gkh
+        moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+        moved location of startup() call in serial_probe() until after all
+        of the port information and endpoints are initialized.  This makes
+        things easier for some drivers.
+
+ (04/10/2002) gkh
+        added serial_read_proc function which creates a
+        /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+        Got USB serial console code working properly and merged into the main
+        version of the tree.  Thanks to Randy Dunlap for the initial version
+        of this code, and for pushing me to finish it up.
+        The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+        Moved all manipulation of port->open_count into the core.  Now the
+        individual driver's open and close functions are called only when the
+        first open() and last close() is called.  Making the drivers a bit
+        smaller and simpler.
+        Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+        Moved all locking into the main serial_* functions, instead of having
+        the individual drivers have to grab the port semaphore.  This should
+        reduce races.
+        Reworked the MOD_INC logic a bit to always increment and decrement, even
+        if the generic driver is being used.
+
+ (10/10/2001) gkh
+        usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+        help prevent child drivers from accessing the device since it is now
+        gone.
+
+ (09/13/2001) gkh
+        Moved generic driver initialize after we have registered with the USB
+        core.  Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+        Fixed module paramater size.  Thanks to John Brockmeyer for the pointer.
+        Fixed vendor and product getting defined through the MODULE_PARM macro
+        if the Generic driver wasn't compiled in.
+        Fixed problem with generic_shutdown() not being called for drivers that
+        don't have a shutdown() function.
+
+ (06/06/2001) gkh
+        added evil hack that is needed for the prolific pl2303 device due to the
+        crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+        switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (04/08/2001) gb
+        Identify version on module load.
+
+ 2001_02_05 gkh
+        Fixed buffer overflows bug with the generic serial driver.  Thanks to
+        Todd Squires <squirest@ct0.com> for fixing this.
+
+ (01/10/2001) gkh
+        Fixed bug where the generic serial adaptor grabbed _any_ device that was
+        offered to it.
+
+ (12/12/2000) gkh
+        Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+        moved them to the serial_open and serial_close functions.
+        Also fixed bug with there not being a MOD_DEC for the generic driver
+        (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+        Small NULL pointer initialization cleanup which saves a bit of disk image
+
+ (11/01/2000) Adam J. Richter
+        instead of using idVendor/idProduct pairs, usb serial drivers
+        now identify their hardware interest with usb_device_id tables,
+        which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+        Fixed bug with urb->dev not being set properly, now that the usb
+        core needs it.
+
+ (09/11/2000) gkh
+        Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+        Added port_lock to port structure.
+        Added locks for SMP safeness to generic driver
+        Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+        Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+        Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+        Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+        Changed generic_write_bulk_callback to not call wake_up_interruptible
+        directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+        Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+        Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+        removed from the individual device source files.
+
+ (05/03/2000) gkh
+        Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+        Changed devfs and tty register code to work properly now. This was based on
+        the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+        Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+        Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
+        Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+        Added driver for ZyXEL omni.net lcd plus ISDN TA
+        Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+        Changed the probe process to remove the module unload races.
+        Changed where the tty layer gets initialized to have devfs work nicer.
+        Added initial devfs support.
+
+ (03/26/2000) gkh
+        Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+        Fixed oops that could happen when device was removed while a program
+        was talking to the device.
+        Removed the static urbs and now all urbs are created and destroyed
+        dynamically.
+        Reworked the internal interface. Now everything is based on the
+        usb_serial_port structure instead of the larger usb_serial structure.
+        This fixes the bug that a multiport device could not have more than
+        one port open at one time.
+
+ (03/17/2000) gkh
+        Added config option for debugging messages.
+        Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+        Added the keyspan pda code from Brian Warner <warner@lothar.com>
+        Moved a bunch of the port specific stuff into its own structure. This
+        is in anticipation of the true multiport devices (there's a bug if you
+        try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+        Made it so that any serial devices only have to specify which functions
+        they want to overload from the generic function calls (great,
+        inheritance in C, in a driver, just what I wanted...)
+        Added support for set_termios and ioctl function calls. No drivers take
+        advantage of this yet.
+        Removed the #ifdef MODULE, now there is no module specific code.
+        Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+        to Miles Lott).
+        Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+        Removed the Belkin and Peracom functionality from the driver due to
+        the lack of support from the vendor, and me not wanting people to
+        accidenatly buy the device, expecting it to work with Linux.
+        Added read_bulk_callback and write_bulk_callback to the type structure
+        for the needs of the FTDI and WhiteHEAT driver.
+        Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+        Ryder.
+        Changed the output urb size back to the max endpoint size to make
+        the ftdi_sio driver have it easier, and due to the fact that it didn't
+        really increase the speed any.
+
+ (02/11/2000) gkh
+        Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+        patch from Miles Lott (milos@insync.net).
+        Fixed bug with not restoring the minor range that a device grabs, if
+        the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+        Added initial framework for the Keyspan PDA serial converter so that
+        Brian Warner has a place to put his code.
+        Made the ezusb specific functions generic enough that different
+        devices can use them (whiteheat and keyspan_pda both need them).
+        Split out a whole bunch of structure and other stuff to a separate
+        usb-serial.h file.
+        Made the Visor connection messages a little more understandable, now
+        that Miles Lott (milos@insync.net) has gotten the Generic channel to
+        work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+        Added initial framework for FTDI serial converter so that Bill Ryder
+        has a place to put his code.
+        Added the vendor specific info from Handspring. Now we can print out
+        informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+        Fixed problem of crash when trying to open a port that didn't have a
+        device assigned to it. Made the minor node finding a little smarter,
+        now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+        Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
+        Fixed get_serial_by_minor which was all messed up for multi port
+        devices. Fixed multi port problem for generic devices. Now the number
+        of ports is determined by the number of bulk out endpoints for the
+        generic device.
+
+ (01/19/2000) gkh
+        Removed lots of cruft that was around from the old (pre urb) driver
+        interface.
+        Made the serial_table dynamic. This should save lots of memory when
+        the number of minor nodes goes up to 256.
+        Added initial support for devices that have more than one port.
+        Added more debugging comments for the Visor, and added a needed
+        set_configuration call.
+
+ (01/17/2000) gkh
+        Fixed the WhiteHEAT firmware (my processing tool had a bug)
+        and added new debug loader firmware for it.
+        Removed the put_char function as it isn't really needed.
+        Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+        Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+        Forget the version numbering...that's pretty useless...
+        Made the driver able to be compiled so that the user can select which
+        converter they want to use. This allows people who only want the Visor
+        support to not pay the memory size price of the WhiteHEAT.
+        Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+        grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+        Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+        device. Added startup function to allow firmware to be downloaded to
+        a device if it needs to be.
+        Added firmware download logic to the WhiteHEAT device.
+        Started to add #defines to split up the different drivers for potential
+        configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+      Fixed problems with urb for bulk out.
+      Added initial support for multiple sets of endpoints. This enables
+      the Handspring Visor to be attached successfully. Only the first
+      bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+        Added initial support for the Handspring Visor based on a patch from
+        Miles Lott (milos@sneety.insync.net)
+        Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+        Added initial support for the Connect Tech WhiteHEAT converter.
+        Incremented the number of ports in expectation of getting the
+        WhiteHEAT to work properly (4 ports per connection).
+        Added notification on insertion and removal of what port the
+        device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+        Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+        Fixed bug that happens when device node is opened when there isn't a
+        device attached to it. Thanks to marek@webdesign.no for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+        Split up internals to make it easier to add different types of serial
+        converters to the code.
+        Added a "generic" driver that gets it's vendor and product id
+        from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
+        for the idea and sample code (from the usb scanner driver.)
+        Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+        Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+        Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+        Can recognize the two different devices and start up a read from
+        device when asked to. Writes also work. No control signals yet, this
+        all is vendor specific data (i.e. no spec), also no control for
+        different baud rates or other bit settings.
+        Currently we are using the same devid as the acm driver. This needs
+        to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+     Added support for module parameter options for untested/unknown
+     devices.
+
+ (03/09/2003) gkh
+        Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
+        <brachtl@redgrep.cz> for the information.
+
+ (03/05/2003) gkh
+        Think Treo support is now working.
+
+ (04/03/2002) gkh
+        Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
+        <hiro@zob.ne.jp> for the information.
+
+ (03/27/2002) gkh
+        Removed assumptions that port->tty was always valid (is not true
+        for usb serial console devices.)
+
+ (03/23/2002) gkh
+        Added support for the Palm i705 device, thanks to Thomas Riemer
+        <tom@netmech.com> for the information.
+
+ (03/21/2002) gkh
+        Added support for the Palm m130 device, thanks to Udo Eisenbarth
+        <udo.eisenbarth@web.de> for the information.
+
+ (02/27/2002) gkh
+        Reworked the urb handling logic.  We have no more pool, but dynamically
+        allocate the urb and the transfer buffer on the fly.  In testing this
+        does not incure any measurable overhead.  This also relies on the fact
+        that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+  Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+        Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+        Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
+        for the patch.
+
+ (11/11/2001) gkh
+        Added support for the m125 devices, and added check to prevent oopses
+        for Clié devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+        Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+        Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+        fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+        switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (05/28/2000) gkh
+        Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+        Identify version on module load.
+
+ (01/21/2000) gkh
+        Added write_room and chars_in_buffer, as they were previously using the
+        generic driver versions which is all wrong now that we are using an urb
+        pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
+        Removed count assignment in the write function, which was not needed anymore
+        either.  Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+        Moved MOD_DEC to end of visor_close to be nicer, as the final write
+        message can sleep.
+
+ (11/12/2000) gkh
+        Fixed bug with data being dropped on the floor by forcing tty->low_latency
+        to be on.  Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+        usb_device_id table support
+
+ (10/05/2000) gkh
+        Fixed bug with urb->dev not being set properly, now that the usb
+        core needs it.
+
+ (09/11/2000) gkh
+        Got rid of always calling kmalloc for every urb we wrote out to the
+        device.
+        Added visor_read_callback so we can keep track of bytes in and out for
+        those people who like to know the speed of their device.
+        Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+        Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
+        the host controller drivers set urb->dev = NULL when the urb is finished.
+
+ (08/28/2000) gkh
+        Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+        Fixed endian problem in visor_startup.
+        Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+        than once.
+
+ (07/23/2000) gkh
+        Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+        Added module_init and module_exit functions to handle the fact that this
+        driver is a loadable module now.
+
+ (07/03/2000) gkh
+        Added visor_set_ioctl and visor_set_termios functions (they don't do much
+        of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+        Fixed bug in visor_unthrottle that should help with the disconnect in PPP
+        bug that people have been reporting.
+
+ (06/23/2000) gkh
+        Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+        Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+        Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+        allowed driver to work properly if there is no tty assigned to a port
+        (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+        Added RTS and DTR line control.  Thanks to joe@bndlg.de for parts of it.
+
+ 2001_Sep_19 gkh
+        Added break support.
+
+ 2001_Aug_30 gkh
+        fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+        reworked buffer logic to be like other usb-serial drivers.  Hopefully
+        removing some reported problems.
+
+ 2001_Jun_06 gkh
+        finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+  - fixed a bug (that shows up with dosemu) where the tty struct is
+    used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+        - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+        - fixed bug in edge_close that kept the port from being used more
+          than once.
+        - fixed memory leak on device removal.
+        - fixed potential double free of memory when command urb submitting
+          failed.
+        - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+        - added support for TIOCMBIS and TIOCMBIC.
+
+     (04/08/2001) gb
+        - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+        - reworked entire driver to fit properly in with the other usb-serial
+          drivers.  Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+        - changed device table to work properly for 2.4.x final format.
+        - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+        - cleaned up more NTisms.
+        - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+        - Started to clean up NTisms.
+        - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+        Remove all EPIC code and GPL source
+  Fix RELEVANT_IFLAG macro to include flow control
+  changes port configuration changes.
+  Fix redefinition of SERIAL_MAGIC
+  Change all timeout values to 5 seconds
+  Tried to fix the UHCI multiple urb submission, but failed miserably.
+  it seems to work fine with OHCI.
+  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+    find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+  Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+  Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+  Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+  Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+  Add IOCTLs to support RXTX and JAVA POS
+  and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+  Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+  fixed bug in enumeration.  If epconfig turns on mapping by
+  path after a device is already plugged in, we now update
+  the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+  Added BlockUntilChaseResp() to also wait for txcredits
+  Updated the way we allocate and handle write URBs
+        Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+        change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+  Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+  cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+        changed tty_register around to be like the way it
+        was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+  Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+        Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+  Removed all config/status IOCTLS and
+  converted to using /proc/edgeport
+  still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+  Removed configuration based on ttyUSB0
+  Added support for configuration using /prod/edgeport
+  first attempt at using devfs (not working yet!)
+  Added IOCTL to GetProductInfo()
+  Added support for custom baud rates
+        Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+        added additional configuration IOCTLs
+  use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+        fixed module initialization race conditions.
+        made all urbs dynamically allocated.
+        made driver devfs compatible. now it only registers the tty device
+        when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+        added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+        added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+  Change interrupt read start when device is plugged in
+  and stop when device is removed
+        process interrupt reads when all ports are closed
+  (keep value of rxBytesAvail consistent with the edgeport)
+  set the USB_BULK_QUEUE flag so that we can shove a bunch
+  of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+        start to add enumeration code.
+  generate serial number for epic devices
+  add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+  add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+        more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+        added more error checking to handle oops when data is hanging
+        around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+        Add epic support for xon/xoff chars
+        play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+        changed most "info" calls to "dbg"
+        implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+        added EPIC support
+        enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+        Release to IO networks.
+        Integrated changes that David made
+  made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+        Release to IO networks.
+        Fixed problems that were seen in code by David.
+  Now both Edgeport/4 and Edgeport/2 works properly.
+  Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+        Milestone 3 release.
+        Release to IO Networks
+        ioctl for waiting on line change implemented.
+        ioctl for getting statistics implemented.
+        multiport support working.
+        lsr and msr registers are now handled properly.
+        change break now hooked up and working.
+        support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+        Release to IO networks.
+        CHASE is implemented correctly when port is closed.
+        SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+        Release to IO networks.
+        Known problems:
+                modem status register changes are not sent on to the user
+                CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+        Second cut at the CeBit demo.
+        Doesn't leak memory on every write to the port
+        Still small leaks on startup.
+        Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+        CeBit demo release.
+        Force the line settings to 4800, 8, 1, e for the demo.
+        Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+        Milestone 1 release.
+        Device is found by USB subsystem, enumerated, fimware is downloaded
+        and the descriptors are printed to the debug log, config is set, and
+        green light starts to blink. Open port works, and data can be sent
+        and received at the default settings of the UART. Loopback connector
+        and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+        Initial release to help IO Networks try to set up their test system.
+        Edgeport4 is recognized, firmware is downloaded, config is set so
+        device blinks green light every 3 sec. Port is bound, but opening,
+        closing, and sending data do not work properly.
+
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 04bfe279d763..dc4c498bd1ed 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -27,225 +27,6 @@
  * Networks technical support, or Peter Berger <pberger@brimson.com>,
  * or Al Borchers <alborchers@steinerpoint.com>.
  *
- * Version history:
- * 
- * 2003_04_03 al borchers
- *  - fixed a bug (that shows up with dosemu) where the tty struct is
- *    used in a callback after it has been freed
- *
- * 2.3 2002_03_08 greg kroah-hartman
- *      - fixed bug when multiple devices were attached at the same time.
- *
- * 2.2 2001_11_14 greg kroah-hartman
- *      - fixed bug in edge_close that kept the port from being used more
- *        than once.
- *      - fixed memory leak on device removal.
- *      - fixed potential double free of memory when command urb submitting
- *        failed.
- *      - other small cleanups when the device is removed
- *      
- * 2.1 2001_07_09 greg kroah-hartman
- *      - added support for TIOCMBIS and TIOCMBIC.
- *
- *     (04/08/2001) gb
- *      - Identify version on module load.
- *
- * 2.0 2001_03_05 greg kroah-hartman
- *      - reworked entire driver to fit properly in with the other usb-serial
- *        drivers.  Occasional oopses still happen, but it's a good start.
- *
- * 1.2.3 (02/23/2001) greg kroah-hartman
- *      - changed device table to work properly for 2.4.x final format.
- *      - fixed problem with dropping data at high data rates.
- *
- * 1.2.2 (11/27/2000) greg kroah-hartman
- *      - cleaned up more NTisms.
- *      - Added device table for 2.4.0-test11
- *
- * 1.2.1 (11/08/2000) greg kroah-hartman
- *      - Started to clean up NTisms.
- *      - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
- *
- * 1.2 (10/17/2000) David Iacovelli
- *      Remove all EPIC code and GPL source
- *  Fix RELEVANT_IFLAG macro to include flow control 
- *  changes port configuration changes.
- *  Fix redefinition of SERIAL_MAGIC
- *  Change all timeout values to 5 seconds
- *  Tried to fix the UHCI multiple urb submission, but failed miserably.
- *  it seems to work fine with OHCI.
- *  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must 
- *    find a way to work arount this UHCI bug )
- *
- * 1.1 (10/11/2000) David Iacovelli
- *  Fix XON/XOFF flow control to support both IXON and IXOFF
- *
- * 0.9.27 (06/30/2000) David Iacovelli
- *  Added transmit queue and now allocate urb for command writes.
- *
- * 0.9.26 (06/29/2000) David Iacovelli
- *  Add support for 80251 based edgeport
- *
- * 0.9.25 (06/27/2000) David Iacovelli
- *  Do not close the port if it has multiple opens.
- *
- * 0.9.24 (05/26/2000) David Iacovelli
- *  Add IOCTLs to support RXTX and JAVA POS 
- *  and first cut at running BlackBox Demo
- *
- * 0.9.23 (05/24/2000) David Iacovelli
- *  Add IOCTLs to support RXTX and JAVA POS
- *
- * 0.9.22 (05/23/2000) David Iacovelli
- *  fixed bug in enumeration.  If epconfig turns on mapping by
- *  path after a device is already plugged in, we now update
- *  the mapping correctly
- *
- * 0.9.21 (05/16/2000) David Iacovelli
- *  Added BlockUntilChaseResp() to also wait for txcredits
- *  Updated the way we allocate and handle write URBs 
- *      Add debug code to dump buffers
- *
- * 0.9.20 (05/01/2000) David Iacovelli
- *      change driver to use usb/tts/
- *
- * 0.9.19 (05/01/2000) David Iacovelli
- *  Update code to compile if DEBUG is off
- *
- * 0.9.18 (04/28/2000) David Iacovelli
- *  cleanup and test tty_register with devfs
- *
- * 0.9.17 (04/27/2000) greg kroah-hartman
- *      changed tty_register around to be like the way it
- *      was before, but now it works properly with devfs.
- *
- * 0.9.16 (04/26/2000) david iacovelli
- *  Fixed bug in GetProductInfo()
- *
- * 0.9.15 (04/25/2000) david iacovelli
- *      Updated enumeration
- *
- * 0.9.14 (04/24/2000) david iacovelli
- *  Removed all config/status IOCTLS and 
- *  converted to using /proc/edgeport
- *  still playing with devfs
- *
- * 0.9.13 (04/24/2000) david iacovelli
- *  Removed configuration based on ttyUSB0
- *  Added support for configuration using /prod/edgeport
- *  first attempt at using devfs (not working yet!)
- *  Added IOCTL to GetProductInfo()
- *  Added support for custom baud rates
- *      Add support for random port numbers
- *
- * 0.9.12 (04/18/2000) david iacovelli
- *      added additional configuration IOCTLs
- *  use ttyUSB0 for configuration
- *
- * 0.9.11 (04/17/2000) greg kroah-hartman
- *      fixed module initialization race conditions.
- *      made all urbs dynamically allocated.
- *      made driver devfs compatible. now it only registers the tty device
- *      when the device is actually plugged in.
- *
- * 0.9.10 (04/13/2000) greg kroah-hartman
- *      added proc interface framework.
- *
- * 0.9.9 (04/13/2000) david iacovelli
- *      added enumeration code and ioctls to configure the device
- *
- * 0.9.8 (04/12/2000) david iacovelli
- *  Change interrupt read start when device is plugged in
- *  and stop when device is removed
- *      process interrupt reads when all ports are closed 
- *  (keep value of rxBytesAvail consistent with the edgeport)
- *  set the USB_BULK_QUEUE flag so that we can shove a bunch 
- *  of urbs at once down the pipe 
- *
- * 0.9.7 (04/10/2000) david iacovelli
- *      start to add enumeration code.
- *  generate serial number for epic devices
- *  add support for kdb
- *
- * 0.9.6 (03/30/2000) david iacovelli
- *  add IOCTL to get string, manufacture, and boot descriptors
- *
- * 0.9.5 (03/14/2000) greg kroah-hartman
- *      more error checking added to SerialOpen to try to fix UHCI open problem
- *
- * 0.9.4 (03/09/2000) greg kroah-hartman
- *      added more error checking to handle oops when data is hanging
- *      around and tty is abruptly closed.
- *
- * 0.9.3 (03/09/2000) david iacovelli
- *      Add epic support for xon/xoff chars
- *      play with performance
- *
- * 0.9.2 (03/08/2000) greg kroah-hartman
- *      changed most "info" calls to "dbg"
- *      implemented flow control properly in the termios call
- *
- * 0.9.1 (03/08/2000) david iacovelli
- *      added EPIC support
- *      enabled bootloader update
- *
- * 0.9 (03/08/2000) greg kroah-hartman
- *      Release to IO networks.
- *      Integrated changes that David made
- *  made getting urbs for writing SMP safe
- *
- * 0.8 (03/07/2000) greg kroah-hartman
- *      Release to IO networks.
- *      Fixed problems that were seen in code by David.
- *  Now both Edgeport/4 and Edgeport/2 works properly.
- *  Changed most of the functions to use port instead of serial.
- *
- * 0.7 (02/27/2000) greg kroah-hartman
- *      Milestone 3 release.
- *      Release to IO Networks
- *      ioctl for waiting on line change implemented.
- *      ioctl for getting statistics implemented.
- *      multiport support working.
- *      lsr and msr registers are now handled properly.
- *      change break now hooked up and working.
- *      support for all known Edgeport devices.
- *
- * 0.6 (02/22/2000) greg kroah-hartman
- *      Release to IO networks.
- *      CHASE is implemented correctly when port is closed.
- *      SerialOpen now blocks correctly until port is fully opened.
- *
- * 0.5 (02/20/2000) greg kroah-hartman
- *      Release to IO networks.
- *      Known problems:
- *              modem status register changes are not sent on to the user
- *              CHASE is not implemented when the port is closed.
- *
- * 0.4 (02/16/2000) greg kroah-hartman
- *      Second cut at the CeBit demo.
- *      Doesn't leak memory on every write to the port
- *      Still small leaks on startup.
- *      Added support for Edgeport/2 and Edgeport/8
- *
- * 0.3 (02/15/2000) greg kroah-hartman
- *      CeBit demo release.
- *      Force the line settings to 4800, 8, 1, e for the demo.
- *      Warning! This version leaks memory like crazy!
- *
- * 0.2 (01/30/2000) greg kroah-hartman
- *      Milestone 1 release.
- *      Device is found by USB subsystem, enumerated, fimware is downloaded
- *      and the descriptors are printed to the debug log, config is set, and
- *      green light starts to blink. Open port works, and data can be sent
- *      and received at the default settings of the UART. Loopback connector
- *      and debug log confirms this.
- * 
- * 0.1 (01/23/2000) greg kroah-hartman
- *      Initial release to help IO Networks try to set up their test system. 
- *      Edgeport4 is recognized, firmware is downloaded, config is set so 
- *      device blinks green light every 3 sec. Port is bound, but opening,
- *      closing, and sending data do not work properly.
- * 
  */
 
 #include <linux/config.h>
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index beef3c4cee6e..29719ceab19a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -8,31 +8,10 @@
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
+ *      the Free Software Foundation; either version 2 of the License.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
- * 2002_Mar_26 gkh
- *      allowed driver to work properly if there is no tty assigned to a port
- *      (this happens for serial console devices.)
- *
- * 2001_Oct_06 gkh
- *      Added RTS and DTR line control.  Thanks to joe@bndlg.de for parts of it.
- *
- * 2001_Sep_19 gkh
- *      Added break support.
- *
- * 2001_Aug_30 gkh
- *      fixed oops in write_bulk_callback.
- *
- * 2001_Aug_28 gkh
- *      reworked buffer logic to be like other usb-serial drivers.  Hopefully
- *      removing some reported problems.
- *
- * 2001_Jun_06 gkh
- *      finished porting to 2.4 format.
- * 
  */
 
 #include <linux/config.h>
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 08f600327db4..fde09fba8790 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
 /*
  * USB Serial Converter driver
  *
- * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
  * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
  *
@@ -9,316 +9,11 @@
  *      modify it under the terms of the GNU General Public License version
  *      2 as published by the Free Software Foundation.
  *
- * This driver was originally based on the ACM driver by Armin Fuerst (which was 
+ * This driver was originally based on the ACM driver by Armin Fuerst (which was
  * based on a driver by Brad Keryan)
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
- * (12/10/2002) gkh
- *      Split the ports off into their own struct device, and added a
- *      usb-serial bus driver.
- *
- * (11/19/2002) gkh
- *      removed a few #ifdefs for the generic code and cleaned up the failure
- *      logic in initialization.
- *
- * (10/02/2002) gkh
- *      moved the console code to console.c and out of this file.
- *
- * (06/05/2002) gkh
- *      moved location of startup() call in serial_probe() until after all
- *      of the port information and endpoints are initialized.  This makes
- *      things easier for some drivers.
- *
- * (04/10/2002) gkh
- *      added serial_read_proc function which creates a
- *      /proc/tty/driver/usb-serial file.
- *
- * (03/27/2002) gkh
- *      Got USB serial console code working properly and merged into the main
- *      version of the tree.  Thanks to Randy Dunlap for the initial version
- *      of this code, and for pushing me to finish it up.
- *      The USB serial console works with any usb serial driver device.
- *
- * (03/21/2002) gkh
- *      Moved all manipulation of port->open_count into the core.  Now the
- *      individual driver's open and close functions are called only when the
- *      first open() and last close() is called.  Making the drivers a bit
- *      smaller and simpler.
- *      Fixed a bug if a driver didn't have the owner field set.
- *
- * (02/26/2002) gkh
- *      Moved all locking into the main serial_* functions, instead of having 
- *      the individual drivers have to grab the port semaphore.  This should
- *      reduce races.
- *      Reworked the MOD_INC logic a bit to always increment and decrement, even
- *      if the generic driver is being used.
- *
- * (10/10/2001) gkh
- *      usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- *      help prevent child drivers from accessing the device since it is now
- *      gone.
- *
- * (09/13/2001) gkh
- *      Moved generic driver initialize after we have registered with the USB
- *      core.  Thanks to Randy Dunlap for pointing this problem out.
- *
- * (07/03/2001) gkh
- *      Fixed module paramater size.  Thanks to John Brockmeyer for the pointer.
- *      Fixed vendor and product getting defined through the MODULE_PARM macro
- *      if the Generic driver wasn't compiled in.
- *      Fixed problem with generic_shutdown() not being called for drivers that
- *      don't have a shutdown() function.
- *
- * (06/06/2001) gkh
- *      added evil hack that is needed for the prolific pl2303 device due to the
- *      crazy way its endpoints are set up.
- *
- * (05/30/2001) gkh
- *      switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (04/08/2001) gb
- *      Identify version on module load.
- *
- * 2001_02_05 gkh
- *      Fixed buffer overflows bug with the generic serial driver.  Thanks to
- *      Todd Squires <squirest@ct0.com> for fixing this.
- *
- * (01/10/2001) gkh
- *      Fixed bug where the generic serial adaptor grabbed _any_ device that was
- *      offered to it.
- *
- * (12/12/2000) gkh
- *      Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- *      moved them to the serial_open and serial_close functions.
- *      Also fixed bug with there not being a MOD_DEC for the generic driver
- *      (thanks to Gary Brubaker for finding this.)
- *
- * (11/29/2000) gkh
- *      Small NULL pointer initialization cleanup which saves a bit of disk image
- *
- * (11/01/2000) Adam J. Richter
- *      instead of using idVendor/idProduct pairs, usb serial drivers
- *      now identify their hardware interest with usb_device_id tables,
- *      which they usually have anyhow for use with MODULE_DEVICE_TABLE.
- *
- * (10/05/2000) gkh
- *      Fixed bug with urb->dev not being set properly, now that the usb
- *      core needs it.
- * 
- * (09/11/2000) gkh
- *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (08/28/2000) gkh
- *      Added port_lock to port structure.
- *      Added locks for SMP safeness to generic driver
- *      Fixed the ability to open a generic device's port more than once.
- *
- * (07/23/2000) gkh
- *      Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- *      Modifications to allow usb-serial drivers to be modules.
- *
- * (07/03/2000) gkh
- *      Added more debugging to serial_ioctl call
- * 
- * (06/25/2000) gkh
- *      Changed generic_write_bulk_callback to not call wake_up_interruptible
- *      directly, but to have port_softint do it at a safer time.
- *
- * (06/23/2000) gkh
- *      Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (05/22/2000) gkh
- *      Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be 
- *      removed from the individual device source files.
- *
- * (05/03/2000) gkh
- *      Added the Digi Acceleport driver from Al Borchers and Peter Berger.
- * 
- * (05/02/2000) gkh
- *      Changed devfs and tty register code to work properly now. This was based on
- *      the ACM driver changes by Vojtech Pavlik.
- *
- * (04/27/2000) Ryan VanderBijl
- *      Put calls to *_paranoia_checks into one function.
- * 
- * (04/23/2000) gkh
- *      Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- *      Moved when the startup code printed out the devices that are supported.
- *
- * (04/19/2000) gkh
- *      Added driver for ZyXEL omni.net lcd plus ISDN TA
- *      Made startup info message specify which drivers were compiled in.
- *
- * (04/03/2000) gkh
- *      Changed the probe process to remove the module unload races.
- *      Changed where the tty layer gets initialized to have devfs work nicer.
- *      Added initial devfs support.
- *
- * (03/26/2000) gkh
- *      Split driver up into device specific pieces.
- * 
- * (03/19/2000) gkh
- *      Fixed oops that could happen when device was removed while a program
- *      was talking to the device.
- *      Removed the static urbs and now all urbs are created and destroyed
- *      dynamically.
- *      Reworked the internal interface. Now everything is based on the 
- *      usb_serial_port structure instead of the larger usb_serial structure.
- *      This fixes the bug that a multiport device could not have more than
- *      one port open at one time.
- *
- * (03/17/2000) gkh
- *      Added config option for debugging messages.
- *      Added patch for keyspan pda from Brian Warner.
- *
- * (03/06/2000) gkh
- *      Added the keyspan pda code from Brian Warner <warner@lothar.com>
- *      Moved a bunch of the port specific stuff into its own structure. This
- *      is in anticipation of the true multiport devices (there's a bug if you
- *      try to access more than one port of any multiport device right now)
- *
- * (02/21/2000) gkh
- *      Made it so that any serial devices only have to specify which functions
- *      they want to overload from the generic function calls (great, 
- *      inheritance in C, in a driver, just what I wanted...)
- *      Added support for set_termios and ioctl function calls. No drivers take
- *      advantage of this yet.
- *      Removed the #ifdef MODULE, now there is no module specific code.
- *      Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- *      to Miles Lott).
- *      Small fix to get_free_serial.
- *
- * (02/14/2000) gkh
- *      Removed the Belkin and Peracom functionality from the driver due to
- *      the lack of support from the vendor, and me not wanting people to 
- *      accidenatly buy the device, expecting it to work with Linux.
- *      Added read_bulk_callback and write_bulk_callback to the type structure
- *      for the needs of the FTDI and WhiteHEAT driver.
- *      Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- *      Ryder.
- *      Changed the output urb size back to the max endpoint size to make
- *      the ftdi_sio driver have it easier, and due to the fact that it didn't
- *      really increase the speed any.
- *
- * (02/11/2000) gkh
- *      Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- *      patch from Miles Lott (milos@insync.net).
- *      Fixed bug with not restoring the minor range that a device grabs, if
- *      the startup function fails (thanks Miles for finding this).
- *
- * (02/05/2000) gkh
- *      Added initial framework for the Keyspan PDA serial converter so that
- *      Brian Warner has a place to put his code.
- *      Made the ezusb specific functions generic enough that different
- *      devices can use them (whiteheat and keyspan_pda both need them).
- *      Split out a whole bunch of structure and other stuff to a separate
- *      usb-serial.h file.
- *      Made the Visor connection messages a little more understandable, now
- *      that Miles Lott (milos@insync.net) has gotten the Generic channel to
- *      work. Also made them always show up in the log file.
- * 
- * (01/25/2000) gkh
- *      Added initial framework for FTDI serial converter so that Bill Ryder
- *      has a place to put his code.
- *      Added the vendor specific info from Handspring. Now we can print out
- *      informational debug messages as well as understand what is happening.
- *
- * (01/23/2000) gkh
- *      Fixed problem of crash when trying to open a port that didn't have a
- *      device assigned to it. Made the minor node finding a little smarter,
- *      now it looks to find a continuous space for the new device.
- *
- * (01/21/2000) gkh
- *      Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
- *      Fixed get_serial_by_minor which was all messed up for multi port 
- *      devices. Fixed multi port problem for generic devices. Now the number
- *      of ports is determined by the number of bulk out endpoints for the
- *      generic device.
- *
- * (01/19/2000) gkh
- *      Removed lots of cruft that was around from the old (pre urb) driver 
- *      interface.
- *      Made the serial_table dynamic. This should save lots of memory when
- *      the number of minor nodes goes up to 256.
- *      Added initial support for devices that have more than one port. 
- *      Added more debugging comments for the Visor, and added a needed 
- *      set_configuration call.
- *
- * (01/17/2000) gkh
- *      Fixed the WhiteHEAT firmware (my processing tool had a bug)
- *      and added new debug loader firmware for it.
- *      Removed the put_char function as it isn't really needed.
- *      Added visor startup commands as found by the Win98 dump.
- * 
- * (01/13/2000) gkh
- *      Fixed the vendor id for the generic driver to the one I meant it to be.
- *
- * (01/12/2000) gkh
- *      Forget the version numbering...that's pretty useless...
- *      Made the driver able to be compiled so that the user can select which
- *      converter they want to use. This allows people who only want the Visor
- *      support to not pay the memory size price of the WhiteHEAT.
- *      Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- *      grabbed the root hub. Not good.
- * 
- * version 0.4.0 (01/10/2000) gkh
- *      Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- *      device. Added startup function to allow firmware to be downloaded to
- *      a device if it needs to be.
- *      Added firmware download logic to the WhiteHEAT device.
- *      Started to add #defines to split up the different drivers for potential
- *      configuration option.
- *      
- * version 0.3.1 (12/30/99) gkh
- *      Fixed problems with urb for bulk out.
- *      Added initial support for multiple sets of endpoints. This enables
- *      the Handspring Visor to be attached successfully. Only the first
- *      bulk in / bulk out endpoint pair is being used right now.
- *
- * version 0.3.0 (12/27/99) gkh
- *      Added initial support for the Handspring Visor based on a patch from
- *      Miles Lott (milos@sneety.insync.net)
- *      Cleaned up the code a bunch and converted over to using urbs only.
- *
- * version 0.2.3 (12/21/99) gkh
- *      Added initial support for the Connect Tech WhiteHEAT converter.
- *      Incremented the number of ports in expectation of getting the
- *      WhiteHEAT to work properly (4 ports per connection).
- *      Added notification on insertion and removal of what port the
- *      device is/was connected to (and what kind of device it was).
- *
- * version 0.2.2 (12/16/99) gkh
- *      Changed major number to the new allocated number. We're legal now!
- *
- * version 0.2.1 (12/14/99) gkh
- *      Fixed bug that happens when device node is opened when there isn't a
- *      device attached to it. Thanks to marek@webdesign.no for noticing this.
- *
- * version 0.2.0 (11/10/99) gkh
- *      Split up internals to make it easier to add different types of serial 
- *      converters to the code.
- *      Added a "generic" driver that gets it's vendor and product id
- *      from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
- *      for the idea and sample code (from the usb scanner driver.)
- *      Cleared up any licensing questions by releasing it under the GNU GPL.
- *
- * version 0.1.2 (10/25/99) gkh
- *      Fixed bug in detecting device.
- *
- * version 0.1.1 (10/05/99) gkh
- *      Changed the major number to not conflict with anything else.
- *
- * version 0.1 (09/28/99) gkh
- *      Can recognize the two different devices and start up a read from
- *      device when asked to. Writes also work. No control signals yet, this
- *      all is vendor specific data (i.e. no spec), also no control for
- *      different baud rates or other bit settings.
- *      Currently we are using the same devid as the acm driver. This needs
- *      to change.
- * 
  */
 
 #include <linux/config.h>
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index 4ca5e0c05611..1cedc1999508 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -1,53 +1,13 @@
 /*
  * USB Serial Converter driver
  *
- *      Copyright (C) 1999 - 2004
+ *      Copyright (C) 1999 - 2005
  *          Greg Kroah-Hartman (greg@kroah.com)
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
+ *      the Free Software Foundation; either version 2 of the License.
  *
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
- * (03/26/2002) gkh
- *      removed the port->tty check from port_paranoia_check() due to serial
- *      consoles not having a tty device assigned to them.
- *
- * (12/03/2001) gkh
- *      removed active from the port structure.
- *      added documentation to the usb_serial_device_type structure
- *
- * (10/10/2001) gkh
- *      added vendor and product to serial structure.  Needed to determine device
- *      owner when the device is disconnected.
- *
- * (05/30/2001) gkh
- *      added sem to port structure and removed port_lock
- *
- * (10/05/2000) gkh
- *      Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- *      fix bug with urb->dev not being set properly, now that the usb core
- *      needs it.
- * 
- * (09/11/2000) gkh
- *      Added usb_serial_debug_data function to help get rid of #DEBUG in the
- *      drivers.
- *
- * (08/28/2000) gkh
- *      Added port_lock to port structure.
- *
- * (08/08/2000) gkh
- *      Added open_count to port structure.
- *
- * (07/23/2000) gkh
- *      Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- *      Modifications to allow usb-serial drivers to be modules.
- *
- * 
  */
 
 
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 0ac0377e8683..39ad0cab8635 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -7,139 +7,10 @@
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
- *      the Free Software Foundation; either version 2 of the License, or
- *      (at your option) any later version.
+ *      the Free Software Foundation; either version 2 of the License.
  *
  * See Documentation/usb/usb-serial.txt for more information on using this driver
  *
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- *     Added support for module parameter options for untested/unknown
- *     devices.
- *
- * (03/09/2003) gkh
- *      Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
- *      <brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- *      Think Treo support is now working.
- *
- * (04/03/2002) gkh
- *      Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
- *      <hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- *      Removed assumptions that port->tty was always valid (is not true
- *      for usb serial console devices.)
- *
- * (03/23/2002) gkh
- *      Added support for the Palm i705 device, thanks to Thomas Riemer
- *      <tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- *      Added support for the Palm m130 device, thanks to Udo Eisenbarth
- *      <udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- *      Reworked the urb handling logic.  We have no more pool, but dynamically
- *      allocate the urb and the transfer buffer on the fly.  In testing this
- *      does not incure any measurable overhead.  This also relies on the fact
- *      that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- *  Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- *      Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- *      Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
- *      for the patch.
- *
- * (11/11/2001) gkh
- *      Added support for the m125 devices, and added check to prevent oopses
- *      for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- *      Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- *      Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- *      fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- *      switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- *      Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- *      Identify version on module load.
- *
- * (01/21/2000) gkh
- *      Added write_room and chars_in_buffer, as they were previously using the
- *      generic driver versions which is all wrong now that we are using an urb
- *      pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
- *      Removed count assignment in the write function, which was not needed anymore
- *      either.  Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- *      Moved MOD_DEC to end of visor_close to be nicer, as the final write 
- *      message can sleep.
- * 
- * (11/12/2000) gkh
- *      Fixed bug with data being dropped on the floor by forcing tty->low_latency
- *      to be on.  Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- *      usb_device_id table support
- * 
- * (10/05/2000) gkh
- *      Fixed bug with urb->dev not being set properly, now that the usb
- *      core needs it.
- * 
- * (09/11/2000) gkh
- *      Got rid of always calling kmalloc for every urb we wrote out to the
- *      device.
- *      Added visor_read_callback so we can keep track of bytes in and out for
- *      those people who like to know the speed of their device.
- *      Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- *      Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
- *      the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- *      Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- *      Fixed endian problem in visor_startup.
- *      Fixed MOD_INC and MOD_DEC logic and the ability to open a port more 
- *      than once.
- * 
- * (07/23/2000) gkh
- *      Added pool of write urbs to speed up transfers to the visor.
- * 
- * (07/19/2000) gkh
- *      Added module_init and module_exit functions to handle the fact that this
- *      driver is a loadable module now.
- *
- * (07/03/2000) gkh
- *      Added visor_set_ioctl and visor_set_termios functions (they don't do much
- *      of anything, but are good for debugging.)
- * 
- * (06/25/2000) gkh
- *      Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- *      bug that people have been reporting.
- *
- * (06/23/2000) gkh
- *      Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- *      Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- *      Split driver up into device specific pieces.
- * 
  */
 
 #include <linux/config.h>