diff options
author | Peter Korsgaard <jacmet@sunsite.dk> | 2007-02-16 11:03:54 -0500 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2007-02-23 18:03:45 -0500 |
commit | d0374f4f9c35cdfbee0ade72d06732613b4e6628 (patch) | |
tree | 32b848dd193581115ba5da707c4730f9ca09491b | |
parent | 39c4b38cad00287cfd92cb66fec7c9a3edf50f2a (diff) |
USB: Davicom DM9601 usbnet driver
This patch adds a driver for the Davicom DM9601 USB 1.1 10/100Mbps
ethernet adaptor using the usbnet framework.
See http://www.davicom.com.tw/eng/products/dm9601.htm for details.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/usb/net/Kconfig | 9 | ||||
-rw-r--r-- | drivers/usb/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/net/dm9601.c | 606 |
4 files changed, 623 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c268b51e4518..a9c13196f6bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
@@ -3392,6 +3392,13 @@ L: linux-usb-devel@lists.sourceforge.net | |||
3392 | S: Maintained | 3392 | S: Maintained |
3393 | W: http://www.kroah.com/linux-usb/ | 3393 | W: http://www.kroah.com/linux-usb/ |
3394 | 3394 | ||
3395 | USB DAVICOM DM9601 DRIVER | ||
3396 | P: Peter Korsgaard | ||
3397 | M: jacmet@sunsite.dk | ||
3398 | L: linux-usb-devel@lists.sourceforge.net | ||
3399 | W: http://www.linux-usb.org/usbnet | ||
3400 | S: Maintained | ||
3401 | |||
3395 | USB EHCI DRIVER | 3402 | USB EHCI DRIVER |
3396 | P: David Brownell | 3403 | P: David Brownell |
3397 | M: dbrownell@users.sourceforge.net | 3404 | M: dbrownell@users.sourceforge.net |
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 0f3d7dbb537f..3de564b23147 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig | |||
@@ -186,6 +186,15 @@ config USB_NET_CDCETHER | |||
186 | IEEE 802 "local assignment" bit is set in the address, a "usbX" | 186 | IEEE 802 "local assignment" bit is set in the address, a "usbX" |
187 | name is used instead. | 187 | name is used instead. |
188 | 188 | ||
189 | config USB_NET_DM9601 | ||
190 | tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" | ||
191 | depends on USB_USBNET | ||
192 | select CRC32 | ||
193 | select USB_USBNET_MII | ||
194 | help | ||
195 | This option adds support for Davicom DM9601 based USB 1.1 | ||
196 | 10/100 Ethernet adapters. | ||
197 | |||
189 | config USB_NET_GL620A | 198 | config USB_NET_GL620A |
190 | tristate "GeneSys GL620USB-A based cables" | 199 | tristate "GeneSys GL620USB-A based cables" |
191 | depends on USB_USBNET | 200 | depends on USB_USBNET |
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile index 7b51964de171..595a539f8384 100644 --- a/drivers/usb/net/Makefile +++ b/drivers/usb/net/Makefile | |||
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_PEGASUS) += pegasus.o | |||
8 | obj-$(CONFIG_USB_RTL8150) += rtl8150.o | 8 | obj-$(CONFIG_USB_RTL8150) += rtl8150.o |
9 | obj-$(CONFIG_USB_NET_AX8817X) += asix.o | 9 | obj-$(CONFIG_USB_NET_AX8817X) += asix.o |
10 | obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o | 10 | obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o |
11 | obj-$(CONFIG_USB_NET_DM9601) += dm9601.o | ||
11 | obj-$(CONFIG_USB_NET_GL620A) += gl620a.o | 12 | obj-$(CONFIG_USB_NET_GL620A) += gl620a.o |
12 | obj-$(CONFIG_USB_NET_NET1080) += net1080.o | 13 | obj-$(CONFIG_USB_NET_NET1080) += net1080.o |
13 | obj-$(CONFIG_USB_NET_PLUSB) += plusb.o | 14 | obj-$(CONFIG_USB_NET_PLUSB) += plusb.o |
diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c new file mode 100644 index 000000000000..4a932e1cd93b --- /dev/null +++ b/drivers/usb/net/dm9601.c | |||
@@ -0,0 +1,606 @@ | |||
1 | /* | ||
2 | * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices | ||
3 | * | ||
4 | * Peter Korsgaard <jacmet@sunsite.dk> | ||
5 | * | ||
6 | * This file is licensed under the terms of the GNU General Public License | ||
7 | * version 2. This program is licensed "as is" without any warranty of any | ||
8 | * kind, whether express or implied. | ||
9 | */ | ||
10 | |||
11 | //#define DEBUG | ||
12 | |||
13 | #include <linux/module.h> | ||
14 | #include <linux/sched.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/netdevice.h> | ||
17 | #include <linux/etherdevice.h> | ||
18 | #include <linux/ethtool.h> | ||
19 | #include <linux/mii.h> | ||
20 | #include <linux/usb.h> | ||
21 | #include <linux/crc32.h> | ||
22 | |||
23 | #include "usbnet.h" | ||
24 | |||
25 | /* datasheet: | ||
26 | http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf | ||
27 | */ | ||
28 | |||
29 | /* control requests */ | ||
30 | #define DM_READ_REGS 0x00 | ||
31 | #define DM_WRITE_REGS 0x01 | ||
32 | #define DM_READ_MEMS 0x02 | ||
33 | #define DM_WRITE_REG 0x03 | ||
34 | #define DM_WRITE_MEMS 0x05 | ||
35 | #define DM_WRITE_MEM 0x07 | ||
36 | |||
37 | /* registers */ | ||
38 | #define DM_NET_CTRL 0x00 | ||
39 | #define DM_RX_CTRL 0x05 | ||
40 | #define DM_SHARED_CTRL 0x0b | ||
41 | #define DM_SHARED_ADDR 0x0c | ||
42 | #define DM_SHARED_DATA 0x0d /* low + high */ | ||
43 | #define DM_PHY_ADDR 0x10 /* 6 bytes */ | ||
44 | #define DM_MCAST_ADDR 0x16 /* 8 bytes */ | ||
45 | #define DM_GPR_CTRL 0x1e | ||
46 | #define DM_GPR_DATA 0x1f | ||
47 | |||
48 | #define DM_MAX_MCAST 64 | ||
49 | #define DM_MCAST_SIZE 8 | ||
50 | #define DM_EEPROM_LEN 256 | ||
51 | #define DM_TX_OVERHEAD 2 /* 2 byte header */ | ||
52 | #define DM_RX_OVERHEAD 7 /* 3 byte header + 4 byte crc tail */ | ||
53 | #define DM_TIMEOUT 1000 | ||
54 | |||
55 | |||
56 | static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) | ||
57 | { | ||
58 | devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length); | ||
59 | return usb_control_msg(dev->udev, | ||
60 | usb_rcvctrlpipe(dev->udev, 0), | ||
61 | DM_READ_REGS, | ||
62 | USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, | ||
63 | 0, reg, data, length, USB_CTRL_SET_TIMEOUT); | ||
64 | } | ||
65 | |||
66 | static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) | ||
67 | { | ||
68 | return dm_read(dev, reg, 1, value); | ||
69 | } | ||
70 | |||
71 | static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) | ||
72 | { | ||
73 | devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length); | ||
74 | return usb_control_msg(dev->udev, | ||
75 | usb_sndctrlpipe(dev->udev, 0), | ||
76 | DM_WRITE_REGS, | ||
77 | USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, | ||
78 | 0, reg, data, length, USB_CTRL_SET_TIMEOUT); | ||
79 | } | ||
80 | |||
81 | static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) | ||
82 | { | ||
83 | devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value); | ||
84 | return usb_control_msg(dev->udev, | ||
85 | usb_sndctrlpipe(dev->udev, 0), | ||
86 | DM_WRITE_REG, | ||
87 | USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, | ||
88 | value, reg, 0, 0, USB_CTRL_SET_TIMEOUT); | ||
89 | } | ||
90 | |||
91 | static void dm_write_async_callback(struct urb *urb) | ||
92 | { | ||
93 | struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context; | ||
94 | |||
95 | if (urb->status < 0) | ||
96 | printk(KERN_DEBUG "dm_write_async_callback() failed with %d", | ||
97 | urb->status); | ||
98 | |||
99 | kfree(req); | ||
100 | usb_free_urb(urb); | ||
101 | } | ||
102 | |||
103 | static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) | ||
104 | { | ||
105 | struct usb_ctrlrequest *req; | ||
106 | struct urb *urb; | ||
107 | int status; | ||
108 | |||
109 | devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length); | ||
110 | |||
111 | urb = usb_alloc_urb(0, GFP_ATOMIC); | ||
112 | if (!urb) { | ||
113 | deverr(dev, "Error allocating URB in dm_write_async!"); | ||
114 | return; | ||
115 | } | ||
116 | |||
117 | req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); | ||
118 | if (!req) { | ||
119 | deverr(dev, "Failed to allocate memory for control request"); | ||
120 | usb_free_urb(urb); | ||
121 | return; | ||
122 | } | ||
123 | |||
124 | req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; | ||
125 | req->bRequest = DM_WRITE_REGS; | ||
126 | req->wValue = 0; | ||
127 | req->wIndex = cpu_to_le16(reg); | ||
128 | req->wLength = cpu_to_le16(length); | ||
129 | |||
130 | usb_fill_control_urb(urb, dev->udev, | ||
131 | usb_sndctrlpipe(dev->udev, 0), | ||
132 | (void *)req, data, length, | ||
133 | dm_write_async_callback, req); | ||
134 | |||
135 | status = usb_submit_urb(urb, GFP_ATOMIC); | ||
136 | if (status < 0) { | ||
137 | deverr(dev, "Error submitting the control message: status=%d", | ||
138 | status); | ||
139 | kfree(req); | ||
140 | usb_free_urb(urb); | ||
141 | } | ||
142 | } | ||
143 | |||
144 | static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value) | ||
145 | { | ||
146 | struct usb_ctrlrequest *req; | ||
147 | struct urb *urb; | ||
148 | int status; | ||
149 | |||
150 | devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x", | ||
151 | reg, value); | ||
152 | |||
153 | urb = usb_alloc_urb(0, GFP_ATOMIC); | ||
154 | if (!urb) { | ||
155 | deverr(dev, "Error allocating URB in dm_write_async!"); | ||
156 | return; | ||
157 | } | ||
158 | |||
159 | req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); | ||
160 | if (!req) { | ||
161 | deverr(dev, "Failed to allocate memory for control request"); | ||
162 | usb_free_urb(urb); | ||
163 | return; | ||
164 | } | ||
165 | |||
166 | req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; | ||
167 | req->bRequest = DM_WRITE_REG; | ||
168 | req->wValue = cpu_to_le16(value); | ||
169 | req->wIndex = cpu_to_le16(reg); | ||
170 | req->wLength = 0; | ||
171 | |||
172 | usb_fill_control_urb(urb, dev->udev, | ||
173 | usb_sndctrlpipe(dev->udev, 0), | ||
174 | (void *)req, 0, 0, dm_write_async_callback, req); | ||
175 | |||
176 | status = usb_submit_urb(urb, GFP_ATOMIC); | ||
177 | if (status < 0) { | ||
178 | deverr(dev, "Error submitting the control message: status=%d", | ||
179 | status); | ||
180 | kfree(req); | ||
181 | usb_free_urb(urb); | ||
182 | } | ||
183 | } | ||
184 | |||
185 | static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, u16 *value) | ||
186 | { | ||
187 | int ret, i; | ||
188 | |||
189 | mutex_lock(&dev->phy_mutex); | ||
190 | |||
191 | dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); | ||
192 | dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4); | ||
193 | |||
194 | for (i = 0; i < DM_TIMEOUT; i++) { | ||
195 | u8 tmp; | ||
196 | |||
197 | udelay(1); | ||
198 | ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); | ||
199 | if (ret < 0) | ||
200 | goto out; | ||
201 | |||
202 | /* ready */ | ||
203 | if ((tmp & 1) == 0) | ||
204 | break; | ||
205 | } | ||
206 | |||
207 | if (i == DM_TIMEOUT) { | ||
208 | deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom"); | ||
209 | ret = -EIO; | ||
210 | goto out; | ||
211 | } | ||
212 | |||
213 | dm_write_reg(dev, DM_SHARED_CTRL, 0x0); | ||
214 | ret = dm_read(dev, DM_SHARED_DATA, 2, value); | ||
215 | |||
216 | devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d", | ||
217 | phy, reg, *value, ret); | ||
218 | |||
219 | out: | ||
220 | mutex_unlock(&dev->phy_mutex); | ||
221 | return ret; | ||
222 | } | ||
223 | |||
224 | static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, u16 value) | ||
225 | { | ||
226 | int ret, i; | ||
227 | |||
228 | mutex_lock(&dev->phy_mutex); | ||
229 | |||
230 | ret = dm_write(dev, DM_SHARED_DATA, 2, &value); | ||
231 | if (ret < 0) | ||
232 | goto out; | ||
233 | |||
234 | dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg); | ||
235 | dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14); | ||
236 | |||
237 | for (i = 0; i < DM_TIMEOUT; i++) { | ||
238 | u8 tmp; | ||
239 | |||
240 | udelay(1); | ||
241 | ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp); | ||
242 | if (ret < 0) | ||
243 | goto out; | ||
244 | |||
245 | /* ready */ | ||
246 | if ((tmp & 1) == 0) | ||
247 | break; | ||
248 | } | ||
249 | |||
250 | if (i == DM_TIMEOUT) { | ||
251 | deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom"); | ||
252 | ret = -EIO; | ||
253 | goto out; | ||
254 | } | ||
255 | |||
256 | dm_write_reg(dev, DM_SHARED_CTRL, 0x0); | ||
257 | |||
258 | out: | ||
259 | mutex_unlock(&dev->phy_mutex); | ||
260 | return ret; | ||
261 | } | ||
262 | |||
263 | static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) | ||
264 | { | ||
265 | return dm_read_shared_word(dev, 0, offset, value); | ||
266 | } | ||
267 | |||
268 | |||
269 | |||
270 | static int dm9601_get_eeprom_len(struct net_device *dev) | ||
271 | { | ||
272 | return DM_EEPROM_LEN; | ||
273 | } | ||
274 | |||
275 | static int dm9601_get_eeprom(struct net_device *net, | ||
276 | struct ethtool_eeprom *eeprom, u8 * data) | ||
277 | { | ||
278 | struct usbnet *dev = netdev_priv(net); | ||
279 | u16 *ebuf = (u16 *) data; | ||
280 | int i; | ||
281 | |||
282 | /* access is 16bit */ | ||
283 | if ((eeprom->offset % 2) || (eeprom->len % 2)) | ||
284 | return -EINVAL; | ||
285 | |||
286 | for (i = 0; i < eeprom->len / 2; i++) { | ||
287 | if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i, | ||
288 | &ebuf[i]) < 0) | ||
289 | return -EINVAL; | ||
290 | } | ||
291 | return 0; | ||
292 | } | ||
293 | |||
294 | static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc) | ||
295 | { | ||
296 | struct usbnet *dev = netdev_priv(netdev); | ||
297 | |||
298 | u16 res; | ||
299 | |||
300 | if (phy_id) { | ||
301 | devdbg(dev, "Only internal phy supported"); | ||
302 | return 0; | ||
303 | } | ||
304 | |||
305 | dm_read_shared_word(dev, 1, loc, &res); | ||
306 | |||
307 | devdbg(dev, | ||
308 | "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", | ||
309 | phy_id, loc, le16_to_cpu(res)); | ||
310 | |||
311 | return le16_to_cpu(res); | ||
312 | } | ||
313 | |||
314 | static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc, | ||
315 | int val) | ||
316 | { | ||
317 | struct usbnet *dev = netdev_priv(netdev); | ||
318 | u16 res = cpu_to_le16(val); | ||
319 | |||
320 | if (phy_id) { | ||
321 | devdbg(dev, "Only internal phy supported"); | ||
322 | return; | ||
323 | } | ||
324 | |||
325 | devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", | ||
326 | phy_id, loc, val); | ||
327 | |||
328 | dm_write_shared_word(dev, 1, loc, res); | ||
329 | } | ||
330 | |||
331 | static void dm9601_get_drvinfo(struct net_device *net, | ||
332 | struct ethtool_drvinfo *info) | ||
333 | { | ||
334 | /* Inherit standard device info */ | ||
335 | usbnet_get_drvinfo(net, info); | ||
336 | info->eedump_len = DM_EEPROM_LEN; | ||
337 | } | ||
338 | |||
339 | static u32 dm9601_get_link(struct net_device *net) | ||
340 | { | ||
341 | struct usbnet *dev = netdev_priv(net); | ||
342 | |||
343 | return mii_link_ok(&dev->mii); | ||
344 | } | ||
345 | |||
346 | static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd) | ||
347 | { | ||
348 | struct usbnet *dev = netdev_priv(net); | ||
349 | |||
350 | return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); | ||
351 | } | ||
352 | |||
353 | static struct ethtool_ops dm9601_ethtool_ops = { | ||
354 | .get_drvinfo = dm9601_get_drvinfo, | ||
355 | .get_link = dm9601_get_link, | ||
356 | .get_msglevel = usbnet_get_msglevel, | ||
357 | .set_msglevel = usbnet_set_msglevel, | ||
358 | .get_eeprom_len = dm9601_get_eeprom_len, | ||
359 | .get_eeprom = dm9601_get_eeprom, | ||
360 | .get_settings = usbnet_get_settings, | ||
361 | .set_settings = usbnet_set_settings, | ||
362 | .nway_reset = usbnet_nway_reset, | ||
363 | }; | ||
364 | |||
365 | static void dm9601_set_multicast(struct net_device *net) | ||
366 | { | ||
367 | struct usbnet *dev = netdev_priv(net); | ||
368 | /* We use the 20 byte dev->data for our 8 byte filter buffer | ||
369 | * to avoid allocating memory that is tricky to free later */ | ||
370 | u8 *hashes = (u8 *) & dev->data; | ||
371 | u8 rx_ctl = 0x01; | ||
372 | |||
373 | memset(hashes, 0x00, DM_MCAST_SIZE); | ||
374 | hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */ | ||
375 | |||
376 | if (net->flags & IFF_PROMISC) { | ||
377 | rx_ctl |= 0x02; | ||
378 | } else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) { | ||
379 | rx_ctl |= 0x04; | ||
380 | } else if (net->mc_count) { | ||
381 | struct dev_mc_list *mc_list = net->mc_list; | ||
382 | int i; | ||
383 | |||
384 | for (i = 0; i < net->mc_count; i++) { | ||
385 | u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26; | ||
386 | hashes[crc >> 3] |= 1 << (crc & 0x7); | ||
387 | } | ||
388 | } | ||
389 | |||
390 | dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes); | ||
391 | dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl); | ||
392 | } | ||
393 | |||
394 | static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) | ||
395 | { | ||
396 | int ret; | ||
397 | |||
398 | ret = usbnet_get_endpoints(dev, intf); | ||
399 | if (ret) | ||
400 | goto out; | ||
401 | |||
402 | dev->net->do_ioctl = dm9601_ioctl; | ||
403 | dev->net->set_multicast_list = dm9601_set_multicast; | ||
404 | dev->net->ethtool_ops = &dm9601_ethtool_ops; | ||
405 | dev->net->hard_header_len += DM_TX_OVERHEAD; | ||
406 | dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; | ||
407 | dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD; | ||
408 | |||
409 | dev->mii.dev = dev->net; | ||
410 | dev->mii.mdio_read = dm9601_mdio_read; | ||
411 | dev->mii.mdio_write = dm9601_mdio_write; | ||
412 | dev->mii.phy_id_mask = 0x1f; | ||
413 | dev->mii.reg_num_mask = 0x1f; | ||
414 | |||
415 | /* reset */ | ||
416 | ret = dm_write_reg(dev, DM_NET_CTRL, 1); | ||
417 | udelay(20); | ||
418 | |||
419 | /* read MAC */ | ||
420 | ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr); | ||
421 | if (ret < 0) { | ||
422 | printk(KERN_ERR "Error reading MAC address\n"); | ||
423 | ret = -ENODEV; | ||
424 | goto out; | ||
425 | } | ||
426 | |||
427 | |||
428 | /* power up phy */ | ||
429 | dm_write_reg(dev, DM_GPR_CTRL, 1); | ||
430 | dm_write_reg(dev, DM_GPR_DATA, 0); | ||
431 | |||
432 | /* receive broadcast packets */ | ||
433 | dm9601_set_multicast(dev->net); | ||
434 | |||
435 | dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); | ||
436 | dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, | ||
437 | ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); | ||
438 | mii_nway_restart(&dev->mii); | ||
439 | |||
440 | out: | ||
441 | return ret; | ||
442 | } | ||
443 | |||
444 | static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | ||
445 | { | ||
446 | u8 status; | ||
447 | int len; | ||
448 | |||
449 | /* format: | ||
450 | b0: rx status | ||
451 | b1: packet length (incl crc) low | ||
452 | b2: packet length (incl crc) high | ||
453 | b3..n-4: packet data | ||
454 | bn-3..bn: ethernet crc | ||
455 | */ | ||
456 | |||
457 | if (unlikely(skb->len < DM_RX_OVERHEAD)) { | ||
458 | dev_err(&dev->udev->dev, "unexpected tiny rx frame\n"); | ||
459 | return 0; | ||
460 | } | ||
461 | |||
462 | status = skb->data[0]; | ||
463 | len = (skb->data[1] | (skb->data[2] << 8)) - 4; | ||
464 | |||
465 | if (unlikely(status & 0xbf)) { | ||
466 | if (status & 0x01) dev->stats.rx_fifo_errors++; | ||
467 | if (status & 0x02) dev->stats.rx_crc_errors++; | ||
468 | if (status & 0x04) dev->stats.rx_frame_errors++; | ||
469 | if (status & 0x20) dev->stats.rx_missed_errors++; | ||
470 | if (status & 0x90) dev->stats.rx_length_errors++; | ||
471 | return 0; | ||
472 | } | ||
473 | |||
474 | skb_pull(skb, 3); | ||
475 | skb_trim(skb, len); | ||
476 | |||
477 | return 1; | ||
478 | } | ||
479 | |||
480 | static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb, | ||
481 | gfp_t flags) | ||
482 | { | ||
483 | int len; | ||
484 | |||
485 | /* format: | ||
486 | b0: packet length low | ||
487 | b1: packet length high | ||
488 | b3..n: packet data | ||
489 | */ | ||
490 | |||
491 | if (skb_headroom(skb) < DM_TX_OVERHEAD) { | ||
492 | struct sk_buff *skb2; | ||
493 | |||
494 | skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags); | ||
495 | dev_kfree_skb_any(skb); | ||
496 | skb = skb2; | ||
497 | if (!skb) | ||
498 | return NULL; | ||
499 | } | ||
500 | |||
501 | __skb_push(skb, DM_TX_OVERHEAD); | ||
502 | |||
503 | len = skb->len; | ||
504 | /* usbnet adds padding if length is a multiple of packet size | ||
505 | if so, adjust length value in header */ | ||
506 | if ((len % dev->maxpacket) == 0) | ||
507 | len++; | ||
508 | |||
509 | skb->data[0] = len; | ||
510 | skb->data[1] = len >> 8; | ||
511 | |||
512 | return skb; | ||
513 | } | ||
514 | |||
515 | static void dm9601_status(struct usbnet *dev, struct urb *urb) | ||
516 | { | ||
517 | int link; | ||
518 | u8 *buf; | ||
519 | |||
520 | /* format: | ||
521 | b0: net status | ||
522 | b1: tx status 1 | ||
523 | b2: tx status 2 | ||
524 | b3: rx status | ||
525 | b4: rx overflow | ||
526 | b5: rx count | ||
527 | b6: tx count | ||
528 | b7: gpr | ||
529 | */ | ||
530 | |||
531 | if (urb->actual_length < 8) | ||
532 | return; | ||
533 | |||
534 | buf = urb->transfer_buffer; | ||
535 | |||
536 | link = !!(buf[0] & 0x40); | ||
537 | if (netif_carrier_ok(dev->net) != link) { | ||
538 | if (link) { | ||
539 | netif_carrier_on(dev->net); | ||
540 | usbnet_defer_kevent (dev, EVENT_LINK_RESET); | ||
541 | } | ||
542 | else | ||
543 | netif_carrier_off(dev->net); | ||
544 | devdbg(dev, "Link Status is: %d", link); | ||
545 | } | ||
546 | } | ||
547 | |||
548 | static int dm9601_link_reset(struct usbnet *dev) | ||
549 | { | ||
550 | struct ethtool_cmd ecmd; | ||
551 | |||
552 | mii_check_media(&dev->mii, 1, 1); | ||
553 | mii_ethtool_gset(&dev->mii, &ecmd); | ||
554 | |||
555 | devdbg(dev, "link_reset() speed: %d duplex: %d", | ||
556 | ecmd.speed, ecmd.duplex); | ||
557 | |||
558 | return 0; | ||
559 | } | ||
560 | |||
561 | static const struct driver_info dm9601_info = { | ||
562 | .description = "Davicom DM9601 USB Ethernet", | ||
563 | .flags = FLAG_ETHER, | ||
564 | .bind = dm9601_bind, | ||
565 | .rx_fixup = dm9601_rx_fixup, | ||
566 | .tx_fixup = dm9601_tx_fixup, | ||
567 | .status = dm9601_status, | ||
568 | .link_reset = dm9601_link_reset, | ||
569 | .reset = dm9601_link_reset, | ||
570 | }; | ||
571 | |||
572 | static const struct usb_device_id products[] = { | ||
573 | { | ||
574 | USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */ | ||
575 | .driver_info = (unsigned long)&dm9601_info, | ||
576 | }, | ||
577 | {}, // END | ||
578 | }; | ||
579 | |||
580 | MODULE_DEVICE_TABLE(usb, products); | ||
581 | |||
582 | static struct usb_driver dm9601_driver = { | ||
583 | .name = "dm9601", | ||
584 | .id_table = products, | ||
585 | .probe = usbnet_probe, | ||
586 | .disconnect = usbnet_disconnect, | ||
587 | .suspend = usbnet_suspend, | ||
588 | .resume = usbnet_resume, | ||
589 | }; | ||
590 | |||
591 | static int __init dm9601_init(void) | ||
592 | { | ||
593 | return usb_register(&dm9601_driver); | ||
594 | } | ||
595 | |||
596 | static void __exit dm9601_exit(void) | ||
597 | { | ||
598 | usb_deregister(&dm9601_driver); | ||
599 | } | ||
600 | |||
601 | module_init(dm9601_init); | ||
602 | module_exit(dm9601_exit); | ||
603 | |||
604 | MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>"); | ||
605 | MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices"); | ||
606 | MODULE_LICENSE("GPL"); | ||