libata: adjust speed down rules

Speed down rules were too conservative.  Adjust them a bit.

* More than 10 timeouts can't happen in 5 minutes as command timeout
  is 30secs.  Lower the limit for rule #1 to 6.

* 10 timeouts is too high for rule #3 too.  Lower it to 6.

* SATAPI can benefit from falling back to PIO too.  Allow SATAPI
  devices to fall back to PIO.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 6 insertions, 6 deletions

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index b01ade102727..7d766ada7a5d 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1525,13 +1525,13 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
  *      Even if multiple verdicts are returned, only one action is
  *      taken per error.  ering is cleared after an action is taken.
  *
- *      1. If more than 10 ATA_BUS, TOUT_HSM or UNK_DEV errors
+ *      1. If more than 6 ATA_BUS, TOUT_HSM or UNK_DEV errors
  *         ocurred during last 5 mins, FALLBACK_TO_PIO
  *
  *      2. If more than 3 TOUT_HSM or UNK_DEV errors occurred
  *         during last 10 mins, NCQ_OFF.
  *
- *      3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 10
+ *      3. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6
  *         UNK_DEV errors occurred during last 10 mins, SPEED_DOWN.
  *
  *      LOCKING:
@@ -1554,7 +1554,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
 
         if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
             arg.nr_errors[ATA_ECAT_TOUT_HSM] +
-            arg.nr_errors[ATA_ECAT_UNK_DEV] > 10)
+            arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
                 verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
 
         /* scan past 10 mins of error history */
@@ -1568,7 +1568,7 @@ static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
 
         if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
             arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 ||
-            arg.nr_errors[ATA_ECAT_UNK_DEV] > 10)
+            arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
                 verdict |= ATA_EH_SPDN_SPEED_DOWN;
 
         return verdict;
@@ -1647,10 +1647,10 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
         }
 
         /* Fall back to PIO?  Slowing down to PIO is meaningless for
-         * SATA.  Consider it only for PATA.
+         * SATA ATA devices.  Consider it only for PATA and SATAPI.
          */
         if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
-            (link->ap->cbl != ATA_CBL_SATA) &&
+            (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) &&
             (dev->xfer_shift != ATA_SHIFT_PIO)) {
                 if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
                         dev->spdn_cnt = 0;