[SCSI] fusion: endianess fixes

Assorted endianess fixes.  I'll work on full endianess annotations
later.

Acked by: Moore, Eric Dean <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

3 files changed, 16 insertions, 16 deletions

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 284202766804..35444ba4e78a 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -2185,7 +2185,7 @@ GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
                 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
                 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
                 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
-                status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+                status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
                 /* CHECKME! IOCStatus, IOCLogInfo */
 
                 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
@@ -4823,8 +4823,8 @@ mpt_toolbox(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
         pReq->Reserved3 = 0;
         pReq->NumAddressBytes = 0x01;
         pReq->Reserved4 = 0;
-        pReq->DataLength = 0x04;
-        pdev = (struct pci_dev *) ioc->pcidev;
+        pReq->DataLength = cpu_to_le16(0x04);
+        pdev = ioc->pcidev;
         if (pdev->devfn & 1)
                 pReq->DeviceAddr = 0xB2;
         else
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index e63a3fd6b706..7577c2417e2e 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -242,7 +242,7 @@ mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
                 /* Set the command status to GOOD if IOC Status is GOOD
                  * OR if SCSI I/O cmd and data underrun or recovered error.
                  */
-                iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK;
+                iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
                 if (iocStatus  == MPI_IOCSTATUS_SUCCESS)
                         ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
 
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b774f45dfde4..cd4e8c0853d0 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -3447,7 +3447,7 @@ mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
                                  * some type of error occurred.
                                  */
                                 MpiRaidActionReply_t    *pr = (MpiRaidActionReply_t *)mr;
-                                if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS)
+                                if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
                                         completionCode = MPT_SCANDV_GOOD;
                                 else
                                         completionCode = MPT_SCANDV_SOME_ERROR;
@@ -3996,9 +3996,9 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum)
                         dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
                                 "offset=0 negoFlags=%x request=%x config=%x\n",
                                 id, flags, requested, configuration));
-                        pcfg1Data->RequestedParameters = le32_to_cpu(requested);
+                        pcfg1Data->RequestedParameters = cpu_to_le32(requested);
                         pcfg1Data->Reserved = 0;
-                        pcfg1Data->Configuration = le32_to_cpu(configuration);
+                        pcfg1Data->Configuration = cpu_to_le32(configuration);
                         cfg.pageAddr = (bus<<8) | id;
                         mpt_config(hd->ioc, &cfg);
                 }
@@ -5248,7 +5248,7 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
                 /* Update tmax values with those from Device Page 0.*/
                 pPage0 = (SCSIDevicePage0_t *) pPage;
                 if (pPage0) {
-                        val = cpu_to_le32(pPage0->NegotiatedParameters);
+                        val = le32_to_cpu(pPage0->NegotiatedParameters);
                         dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
                         dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
                         dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
@@ -5276,12 +5276,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
                                 dv->now.offset, &val, &configuration, dv->now.flags);
                         dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
                                 id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
-                        pPage1->RequestedParameters = le32_to_cpu(val);
+                        pPage1->RequestedParameters = cpu_to_le32(val);
                         pPage1->Reserved = 0;
-                        pPage1->Configuration = le32_to_cpu(configuration);
+                        pPage1->Configuration = cpu_to_le32(configuration);
                 }
 
-                ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n",
+                ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
                                 id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
                 break;
 
@@ -5301,9 +5301,9 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
                                 offset, &val, &configuration, negoFlags);
                         dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
                                 id, width, factor, offset, negoFlags, val, configuration));
-                        pPage1->RequestedParameters = le32_to_cpu(val);
+                        pPage1->RequestedParameters = cpu_to_le32(val);
                         pPage1->Reserved = 0;
-                        pPage1->Configuration = le32_to_cpu(configuration);
+                        pPage1->Configuration = cpu_to_le32(configuration);
                 }
                 ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
                                 id, width, factor, offset, val, configuration, negoFlags));
@@ -5377,12 +5377,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage)
                 if (pPage1) {
                         mptscsih_setDevicePage1Flags (width, factor, offset, &val,
                                                 &configuration, dv->now.flags);
-                        dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n",
+                        dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
                              id, width, offset, factor, dv->now.flags, val, configuration));
 
-                        pPage1->RequestedParameters = le32_to_cpu(val);
+                        pPage1->RequestedParameters = cpu_to_le32(val);
                         pPage1->Reserved = 0;
-                        pPage1->Configuration = le32_to_cpu(configuration);
+                        pPage1->Configuration = cpu_to_le32(configuration);
                 }
 
                 ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",