ixgbe: fix regression on some 82598 adapters

The change to check the SFP+ module again on open() was
causing the XFP (non-SFP+) adapters to be rejected. We
only want to try and re-identify the SFP+ module if the
original probe found that this device was an SFP+ device.
So for this code path (driver loaded with SFP module, module
inserted, ifconfig up of the device) the type will be
ixgbe_phy_unknown for an unidentified SFP+ module.  So we
only check if that is the case.

This problem also shows up on Copper devices.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 14 insertions, 10 deletions

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index aaf482c0d520..cf39f5a47037 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2697,19 +2697,23 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 
         /*
          * For hot-pluggable SFP+ devices, a new SFP+ module may have
-         * arrived before interrupts were enabled.  We need to kick off
-         * the SFP+ module setup first, then try to bring up link.
+         * arrived before interrupts were enabled but after probe.  Such
+         * devices wouldn't have their type identified yet. We need to
+         * kick off the SFP+ module setup first, then try to bring up link.
          * If we're not hot-pluggable SFP+, we just need to configure link
          * and bring it up.
          */
-        err = hw->phy.ops.identify(hw);
-        if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-                dev_err(&adapter->pdev->dev, "failed to initialize because "
-                        "an unsupported SFP+ module type was detected.\n"
-                        "Reload the driver after installing a supported "
-                        "module.\n");
-                ixgbe_down(adapter);
-                return err;
+        if (hw->phy.type == ixgbe_phy_unknown) {
+                err = hw->phy.ops.identify(hw);
+                if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+                        dev_err(&adapter->pdev->dev, "failed to initialize "
+                                "because an unsupported SFP+ module type "
+                                "was detected.\n"
+                                "Reload the driver after installing a "
+                                "supported module.\n");
+                        ixgbe_down(adapter);
+                        return err;
+                }
         }
 
         if (ixgbe_is_sfp(hw)) {