Fix typos in comments

[Ss]ytem => [Ss]ystem
udpate => update
paramters => parameters
orginal => original

Signed-off-by: Thomas Weber <swirl@gmx.li>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

29 files changed, 36 insertions, 36 deletions

diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index fd588ff0e296..5eb279a48fa4 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -573,7 +573,7 @@ void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
 
 Called when a task attach operation has failed after can_attach() has succeeded.
 A subsystem whose can_attach() has some side-effects should provide this
-function, so that the subsytem can implement a rollback. If not, not necessary.
+function, so that the subsystem can implement a rollback. If not, not necessary.
 This will be called only about subsystems whose can_attach() operation have
 succeeded.
 
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 49efae703979..b2cb16ebcb16 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig'
 KCONFIG_NOSILENTUPDATE
 --------------------------------------------------
 If this variable has a non-blank value, it prevents silent kernel
-config udpates (requires explicit updates).
+config updates (requires explicit updates).
 
 KCONFIG_AUTOCONFIG
 --------------------------------------------------
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 5d8bc2cd250c..c1a1fd636bf9 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -125,7 +125,7 @@ versions of the sysfs interface.
 - Block
   The converted block subsystem at /sys/class/block or
   /sys/subsystem/block will contain the links for disks and partitions
-  at the same level, never in a hierarchy. Assuming the block subsytem to
+  at the same level, never in a hierarchy. Assuming the block subsystem to
   contain only disks and not partition devices in the same flat list is
   a bug in the application.
 
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index 02ac6ed38b2d..b22000dbc57d 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -238,7 +238,7 @@ subsystem's filter file.
 
 For convenience, filters for every event in a subsystem can be set or
 cleared as a group by writing a filter expression into the filter file
-at the root of the subsytem.  Note however, that if a filter for any
+at the root of the subsystem.  Note however, that if a filter for any
 event within the subsystem lacks a field specified in the subsystem
 filter, or if the filter can't be applied for any other reason, the
 filter for that event will retain its previous setting.  This can
@@ -250,7 +250,7 @@ fields can be guaranteed to propagate successfully to all events.
 Here are a few subsystem filter examples that also illustrate the
 above points:
 
-Clear the filters on all events in the sched subsytem:
+Clear the filters on all events in the sched subsystem:
 
 # cd /sys/kernel/debug/tracing/events/sched
 # echo 0 > filter
@@ -260,7 +260,7 @@ none
 none
 
 Set a filter using only common fields for all events in the sched
-subsytem (all events end up with the same filter):
+subsystem (all events end up with the same filter):
 
 # cd /sys/kernel/debug/tracing/events/sched
 # echo common_pid == 0 > filter
@@ -270,7 +270,7 @@ common_pid == 0
 common_pid == 0
 
 Attempt to set a filter using a non-common field for all events in the
-sched subsytem (all events but those that have a prev_pid field retain
+sched subsystem (all events but those that have a prev_pid field retain
 their old filters):
 
 # cd /sys/kernel/debug/tracing/events/sched
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 8e6d8665f0ae..f92531fbd501 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1405,7 +1405,7 @@ acpi_os_invalidate_address(
         switch (space_id) {
         case ACPI_ADR_SPACE_SYSTEM_IO:
         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
-                /* Only interference checks against SystemIO and SytemMemory
+                /* Only interference checks against SystemIO and SystemMemory
                    are needed */
                 res.start = address;
                 res.end = address + length - 1;
@@ -1457,7 +1457,7 @@ acpi_os_validate_address (
         switch (space_id) {
         case ACPI_ADR_SPACE_SYSTEM_IO:
         case ACPI_ADR_SPACE_SYSTEM_MEMORY:
-                /* Only interference checks against SystemIO and SytemMemory
+                /* Only interference checks against SystemIO and SystemMemory
                    are needed */
                 res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL);
                 if (!res)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c33806654e46..b1cb8af6af1c 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -43,7 +43,7 @@
  * driver the list of errata that are relevant is below, going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
- * The chipsets all follow very much the same design. The orginal Triton
+ * The chipsets all follow very much the same design. The original Triton
  * series chipsets do _not_ support independant device timings, but this
  * is fixed in Triton II. With the odd mobile exception the chips then
  * change little except in gaining more modes until SATA arrives. This
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 75dc6988cffd..8e180a27be7c 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -1342,7 +1342,7 @@ static void bus_reset_tasklet(unsigned long data)
          * was set up before this reset, the old one is now no longer
          * in use and we can free it. Update the config rom pointers
          * to point to the current config rom and clear the
-         * next_config_rom pointer so a new udpate can take place.
+         * next_config_rom pointer so a new update can take place.
          */
 
         if (ohci->next_config_rom != NULL) {
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 8417cc4c43f1..8475d58f2a33 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -960,7 +960,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request)
                 dma->buflist[i + dma->buf_count] = &entry->buflist[i];
         }
 
-        /* No allocations failed, so now we can replace the orginal pagelist
+        /* No allocations failed, so now we can replace the original pagelist
          * with the new one.
          */
         if (dma->page_count) {
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 37d12e5efa49..1d7aea132a09 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd)
 /**
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
  * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index fbf8c5379ea8..4b4a30b0dabd 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -1328,7 +1328,7 @@ bail:
 /**
  * ipath_pe_put_tid - write a TID in chip
  * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
  * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
@@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 /**
  * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
  * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
  * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index a805402dd4ae..34b778ed97fc 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -1738,7 +1738,7 @@ bail:
 /**
  * ipath_7220_put_tid - write a TID to the chip
  * @dd: the infinipath device
- * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidptr: pointer to the expected TID (in chip) to update
  * @tidtype: 0 for eager, 1 for expected
  * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
  *
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index ab98e135bcbb..7ea0d07836d6 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -309,7 +309,7 @@ wait_busy(hfc4s8s_hw * a)
 
 /******************************************************/
 /* function to read critical counter registers that   */
-/* may be udpated by the chip during read             */
+/* may be updated by the chip during read             */
 /******************************************************/
 static u_char
 Read_hfc8_stable(hfc4s8s_hw * hw, int reg)
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index 565d5b2adc95..129cda737880 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -188,7 +188,7 @@ struct wf_smu_sys_fans_state {
 };
 
 /*
- * Configs for SMU Sytem Fan control loop
+ * Configs for SMU System Fan control loop
  */
 static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = {
         /* Model ID 2 */
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index d14bd227b502..93c21ddd0b77 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -300,7 +300,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
                                    struct dvb_frontend_parameters *p)
 {
         /**
-         * NOTE: ignore all the paramters except frequency.
+         * NOTE: ignore all the parameters except frequency.
          *       others should be fixed to the proper value for ISDB-T,
          *       but don't check here.
          */
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4fd1d8b38788..eb175980a8e0 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -737,7 +737,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
                         SMSC_TRACE(HW, "configuring for carrier OK");
                         if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) &&
                             (!pdata->using_extphy)) {
-                                /* Restore orginal GPIO configuration */
+                                /* Restore original GPIO configuration */
                                 pdata->gpio_setting = pdata->gpio_orig_setting;
                                 smsc911x_reg_write(pdata, GPIO_CFG,
                                         pdata->gpio_setting);
@@ -751,7 +751,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev)
                         if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
                             (!pdata->using_extphy)) {
                                 /* Force 10/100 LED off, after saving
-                                 * orginal GPIO configuration */
+                                 * original GPIO configuration */
                                 pdata->gpio_orig_setting = pdata->gpio_setting;
 
                                 pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_;
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index f184d1d2ecbe..6644337d63d6 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -848,7 +848,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
                 goto err_disable_device;
         }
 
-        /* Check for the proper subsytem ID's
+        /* Check for the proper subsystem ID's
          * Intel uses a different SSID programming model than Compaq.
          * For Intel, each SSID bit identifies a PHP capability.
          * Also Intel HPC's may have RID=0.
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cb1dd5f4988c..ddd55dc927f7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1506,7 +1506,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
  * pci_back_from_sleep - turn PCI device on during system-wide transition into working state
  * @dev: Device to handle.
  *
- * Disable device's sytem wake-up capability and put it into D0.
+ * Disable device's system wake-up capability and put it into D0.
  */
 int pci_back_from_sleep(struct pci_dev *dev)
 {
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 3cbaf1811bd0..d37c445f0eda 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -119,7 +119,7 @@ enum ps3_sys_manager_service_id {
  * enum ps3_sys_manager_attr - Notification attribute (bit position mask).
  * @PS3_SM_ATTR_POWER: Power button.
  * @PS3_SM_ATTR_RESET: Reset button, not available on retail console.
- * @PS3_SM_ATTR_THERMAL: Sytem thermal alert.
+ * @PS3_SM_ATTR_THERMAL: System thermal alert.
  * @PS3_SM_ATTR_CONTROLLER: Remote controller event.
  * @PS3_SM_ATTR_ALL: Logical OR of all.
  *
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index c7bbe30010f7..7461f5bb2bd8 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1538,7 +1538,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages);
  * Context: can sleep
  *
  * Returns a voltage that can be passed to @regulator_set_voltage(),
- * zero if this selector code can't be used on this sytem, or a
+ * zero if this selector code can't be used on this system, or a
  * negative errno.
  */
 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c
index 62c2647f37f4..4a51e3f09689 100644
--- a/drivers/s390/char/sclp_cpi_sys.c
+++ b/drivers/s390/char/sclp_cpi_sys.c
@@ -102,7 +102,7 @@ static struct sclp_req *cpi_prepare_req(void)
         /* set system name */
         set_data(evb->system_name, system_name);
 
-        /* set sytem level */
+        /* set system level */
         evb->system_level = system_level;
 
         /* set sysplex name */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
index 520a22f52dd1..6217eec8c604 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h
@@ -54,7 +54,7 @@ struct bfa_cee_lldp_str_s {
 };
 
 
-/* LLDP paramters */
+/* LLDP parameters */
 struct bfa_cee_lldp_cfg_s {
         struct bfa_cee_lldp_str_s chassis_id;
         struct bfa_cee_lldp_str_s port_id;
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
index cdceaeb9f4b8..03ce0331eb48 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
@@ -223,9 +223,9 @@ enum bfa_status {
         BFA_STATUS_IM_PVID_NON_ZERO = 140, /*  Port VLAN ID (PVID) is Set to
                                             * Non-Zero Value */
         BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /*  Acquiring Network
-                                                  * Subsytem Lock Failed.Please
+                                                  * Subsystem Lock Failed.Please
                                                   * try after some time */
-        BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /*  Acquiring Network Subsytem
+        BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /*  Acquiring Network Subsystem
                                                  * handle Failed. Please try
                                                  * after some time */
         BFA_STATUS_IM_NOT_BOUND = 143, /*  Brocade 10G Ethernet Service is not
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 4f0cc9d457e0..56efdfe1428d 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -639,7 +639,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi)
         }
         mpc8xxx_spi = spi_master_get_devdata(spi->master);
 
-        hw_mode = cs->hw_mode; /* Save orginal settings */
+        hw_mode = cs->hw_mode; /* Save original settings */
         cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
         /* mask out bits we are going to set */
         cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 625447f645d9..7210c0d72e43 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -654,7 +654,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
         /* we use the subsystem vendor/device id as the virtio vendor/device
          * id.  this allows us to use the same PCI vendor/device id for all
          * virtio devices and to identify the particular virtio driver by
-         * the subsytem ids */
+         * the subsystem ids */
         vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor;
         vp_dev->vdev.id.device = pci_dev->subsystem_device;
 
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index d9b031cf69f5..d13b93043b04 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -2437,7 +2437,7 @@ dbAdjCtl(struct bmap * bmp, s64 blkno, int newval, int alloc, int level)
 
         /* check if this is a control page update for an allocation.
          * if so, update the leaf to reflect the new leaf value using
-         * dbSplit(); otherwise (deallocation), use dbJoin() to udpate
+         * dbSplit(); otherwise (deallocation), use dbJoin() to update
          * the leaf with the new value.  in addition to updating the
          * leaf, dbSplit() will also split the binary buddy system of
          * the leaves, if required, and bubble new values within the
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index ef909a329750..a3b0f24bddbb 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -3610,7 +3610,7 @@ static void __init cgroup_init_subsys(struct cgroup_subsys *ss)
  * @ss: the subsystem to load
  *
  * This function should be called in a modular subsystem's initcall. If the
- * subsytem is built as a module, it will be assigned a new subsys_id and set
+ * subsystem is built as a module, it will be assigned a new subsys_id and set
  * up for use. If the subsystem is built-in anyway, work is delegated to the
  * simpler cgroup_init_subsys.
  */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index d03c946d5566..a6326c71b663 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2579,7 +2579,7 @@ static int default_zonelist_order(void)
         struct zone *z;
         int average_size;
         /*
-         * ZONE_DMA and ZONE_DMA32 can be very small area in the sytem.
+         * ZONE_DMA and ZONE_DMA32 can be very small area in the system.
          * If they are really small and used heavily, the system can fall
          * into OOM very easily.
          * This function detect ZONE_DMA/DMA32 size and confgigures zone order.
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index e978c7136c97..2609e445fe7d 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -43,7 +43,7 @@
  *   wimax_rfkill()             Kernel calling wimax_rfkill()
  *     __wimax_rf_toggle_radio()
  *
- * wimax_rfkill_set_radio_block()  RF-Kill subsytem calling
+ * wimax_rfkill_set_radio_block()  RF-Kill subsystem calling
  *   __wimax_rf_toggle_radio()
  *
  * __wimax_rf_toggle_radio()
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index f18bd6207c50..66c7fb3ced3e 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1787,7 +1787,7 @@ int __devinit snd_emu10k1_create(struct snd_card *card,
         else if (subsystem)
                 snd_printdd("Sound card name = %s, "
                         "vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
-                        "Forced to subsytem = 0x%x\n",  c->name,
+                        "Forced to subsystem = 0x%x\n", c->name,
                         pci->vendor, pci->device, emu->serial, c->subsystem);
         else
                 snd_printdd("Sound card name = %s, "