diff options
author | Steve Glendinning <steve.glendinning@smsc.com> | 2008-12-11 23:54:30 -0500 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-12-11 23:54:30 -0500 |
commit | 2cb377283f3469d66f0ea7358015abfe8366e5d0 (patch) | |
tree | 1541f2f50d710b49cd3708c5246b2ac05d91915a | |
parent | ea943d41a8770857d50029fdc8fd111635c21a1f (diff) |
smsc9420: SMSC LAN9420 10/100 PCI ethernet adapter
This patch adds a driver for the LAN9240 PCI ethernet adapter.
Changes since initial submission:
- debug msg_level has been changed to use standard definitions
- convert to use net_device_ops
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | MAINTAINERS | 6 | ||||
-rw-r--r-- | drivers/net/Kconfig | 16 | ||||
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/smsc9420.c | 1608 | ||||
-rw-r--r-- | drivers/net/smsc9420.h | 275 |
5 files changed, 1906 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 2859e9a4ba3f..c3074e275cb4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS | |||
@@ -3915,6 +3915,12 @@ M: steve.glendinning@smsc.com | |||
3915 | L: netdev@vger.kernel.org | 3915 | L: netdev@vger.kernel.org |
3916 | S: Supported | 3916 | S: Supported |
3917 | 3917 | ||
3918 | SMSC9420 PCI ETHERNET DRIVER | ||
3919 | P: Steve Glendinning | ||
3920 | M: steve.glendinning@smsc.com | ||
3921 | L: netdev@vger.kernel.org | ||
3922 | S: Supported | ||
3923 | |||
3918 | SMX UIO Interface | 3924 | SMX UIO Interface |
3919 | P: Ben Nizette | 3925 | P: Ben Nizette |
3920 | M: bn@niasdigital.com | 3926 | M: bn@niasdigital.com |
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e93f5d3f2277..4490c0882779 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig | |||
@@ -1638,6 +1638,22 @@ config EPIC100 | |||
1638 | More specific information and updates are available from | 1638 | More specific information and updates are available from |
1639 | <http://www.scyld.com/network/epic100.html>. | 1639 | <http://www.scyld.com/network/epic100.html>. |
1640 | 1640 | ||
1641 | config SMSC9420 | ||
1642 | tristate "SMSC LAN9420 PCI ethernet adapter support" | ||
1643 | depends on NET_PCI && PCI | ||
1644 | select CRC32 | ||
1645 | select PHYLIB | ||
1646 | select SMSC_PHY | ||
1647 | help | ||
1648 | This is a driver for SMSC's LAN9420 PCI ethernet adapter. | ||
1649 | Say Y if you want it compiled into the kernel, | ||
1650 | and read the Ethernet-HOWTO, available from | ||
1651 | <http://www.linuxdoc.org/docs.html#howto>. | ||
1652 | |||
1653 | This driver is also available as a module. The module will be | ||
1654 | called smsc9420. If you want to compile it as a module, say M | ||
1655 | here and read <file:Documentation/kbuild/modules.txt> | ||
1656 | |||
1641 | config SUNDANCE | 1657 | config SUNDANCE |
1642 | tristate "Sundance Alta support" | 1658 | tristate "Sundance Alta support" |
1643 | depends on NET_PCI && PCI | 1659 | depends on NET_PCI && PCI |
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 35fbe12473d3..e5c34b464211 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile | |||
@@ -56,6 +56,7 @@ obj-$(CONFIG_PCNET32) += pcnet32.o | |||
56 | obj-$(CONFIG_E100) += e100.o | 56 | obj-$(CONFIG_E100) += e100.o |
57 | obj-$(CONFIG_TLAN) += tlan.o | 57 | obj-$(CONFIG_TLAN) += tlan.o |
58 | obj-$(CONFIG_EPIC100) += epic100.o | 58 | obj-$(CONFIG_EPIC100) += epic100.o |
59 | obj-$(CONFIG_SMSC9420) += smsc9420.o | ||
59 | obj-$(CONFIG_SIS190) += sis190.o | 60 | obj-$(CONFIG_SIS190) += sis190.o |
60 | obj-$(CONFIG_SIS900) += sis900.o | 61 | obj-$(CONFIG_SIS900) += sis900.o |
61 | obj-$(CONFIG_R6040) += r6040.o | 62 | obj-$(CONFIG_R6040) += r6040.o |
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c new file mode 100644 index 000000000000..b04bfb2f6106 --- /dev/null +++ b/drivers/net/smsc9420.c | |||
@@ -0,0 +1,1608 @@ | |||
1 | /*************************************************************************** | ||
2 | * | ||
3 | * Copyright (C) 2007,2008 SMSC | ||
4 | * | ||
5 | * This program is free software; you can redistribute it and/or | ||
6 | * modify it under the terms of the GNU General Public License | ||
7 | * as published by the Free Software Foundation; either version 2 | ||
8 | * of the License, or (at your option) any later version. | ||
9 | * | ||
10 | * This program is distributed in the hope that it will be useful, | ||
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | * GNU General Public License for more details. | ||
14 | * | ||
15 | * You should have received a copy of the GNU General Public License | ||
16 | * along with this program; if not, write to the Free Software | ||
17 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
18 | * | ||
19 | *************************************************************************** | ||
20 | */ | ||
21 | |||
22 | #include <linux/kernel.h> | ||
23 | #include <linux/netdevice.h> | ||
24 | #include <linux/phy.h> | ||
25 | #include <linux/pci.h> | ||
26 | #include <linux/if_vlan.h> | ||
27 | #include <linux/dma-mapping.h> | ||
28 | #include <linux/crc32.h> | ||
29 | #include <asm/unaligned.h> | ||
30 | #include "smsc9420.h" | ||
31 | |||
32 | #define DRV_NAME "smsc9420" | ||
33 | #define PFX DRV_NAME ": " | ||
34 | #define DRV_MDIONAME "smsc9420-mdio" | ||
35 | #define DRV_DESCRIPTION "SMSC LAN9420 driver" | ||
36 | #define DRV_VERSION "1.01" | ||
37 | |||
38 | MODULE_LICENSE("GPL"); | ||
39 | MODULE_VERSION(DRV_VERSION); | ||
40 | |||
41 | struct smsc9420_dma_desc { | ||
42 | u32 status; | ||
43 | u32 length; | ||
44 | u32 buffer1; | ||
45 | u32 buffer2; | ||
46 | }; | ||
47 | |||
48 | struct smsc9420_ring_info { | ||
49 | struct sk_buff *skb; | ||
50 | dma_addr_t mapping; | ||
51 | }; | ||
52 | |||
53 | struct smsc9420_pdata { | ||
54 | void __iomem *base_addr; | ||
55 | struct pci_dev *pdev; | ||
56 | struct net_device *dev; | ||
57 | |||
58 | struct smsc9420_dma_desc *rx_ring; | ||
59 | struct smsc9420_dma_desc *tx_ring; | ||
60 | struct smsc9420_ring_info *tx_buffers; | ||
61 | struct smsc9420_ring_info *rx_buffers; | ||
62 | dma_addr_t rx_dma_addr; | ||
63 | dma_addr_t tx_dma_addr; | ||
64 | int tx_ring_head, tx_ring_tail; | ||
65 | int rx_ring_head, rx_ring_tail; | ||
66 | |||
67 | spinlock_t int_lock; | ||
68 | spinlock_t phy_lock; | ||
69 | |||
70 | struct napi_struct napi; | ||
71 | |||
72 | bool software_irq_signal; | ||
73 | bool rx_csum; | ||
74 | u32 msg_enable; | ||
75 | |||
76 | struct phy_device *phy_dev; | ||
77 | struct mii_bus *mii_bus; | ||
78 | int phy_irq[PHY_MAX_ADDR]; | ||
79 | int last_duplex; | ||
80 | int last_carrier; | ||
81 | }; | ||
82 | |||
83 | static const struct pci_device_id smsc9420_id_table[] = { | ||
84 | { PCI_VENDOR_ID_9420, PCI_DEVICE_ID_9420, PCI_ANY_ID, PCI_ANY_ID, }, | ||
85 | { 0, } | ||
86 | }; | ||
87 | |||
88 | MODULE_DEVICE_TABLE(pci, smsc9420_id_table); | ||
89 | |||
90 | #define SMSC_MSG_DEFAULT (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) | ||
91 | |||
92 | static uint smsc_debug; | ||
93 | static uint debug = -1; | ||
94 | module_param(debug, uint, 0); | ||
95 | MODULE_PARM_DESC(debug, "debug level"); | ||
96 | |||
97 | #define smsc_dbg(TYPE, f, a...) \ | ||
98 | do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ | ||
99 | printk(KERN_DEBUG PFX f "\n", ## a); \ | ||
100 | } while (0) | ||
101 | |||
102 | #define smsc_info(TYPE, f, a...) \ | ||
103 | do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ | ||
104 | printk(KERN_INFO PFX f "\n", ## a); \ | ||
105 | } while (0) | ||
106 | |||
107 | #define smsc_warn(TYPE, f, a...) \ | ||
108 | do { if ((pd)->msg_enable & NETIF_MSG_##TYPE) \ | ||
109 | printk(KERN_WARNING PFX f "\n", ## a); \ | ||
110 | } while (0) | ||
111 | |||
112 | static inline u32 smsc9420_reg_read(struct smsc9420_pdata *pd, u32 offset) | ||
113 | { | ||
114 | return ioread32(pd->base_addr + offset); | ||
115 | } | ||
116 | |||
117 | static inline void | ||
118 | smsc9420_reg_write(struct smsc9420_pdata *pd, u32 offset, u32 value) | ||
119 | { | ||
120 | iowrite32(value, pd->base_addr + offset); | ||
121 | } | ||
122 | |||
123 | static inline void smsc9420_pci_flush_write(struct smsc9420_pdata *pd) | ||
124 | { | ||
125 | /* to ensure PCI write completion, we must perform a PCI read */ | ||
126 | smsc9420_reg_read(pd, ID_REV); | ||
127 | } | ||
128 | |||
129 | static int smsc9420_mii_read(struct mii_bus *bus, int phyaddr, int regidx) | ||
130 | { | ||
131 | struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv; | ||
132 | unsigned long flags; | ||
133 | u32 addr; | ||
134 | int i, reg = -EIO; | ||
135 | |||
136 | spin_lock_irqsave(&pd->phy_lock, flags); | ||
137 | |||
138 | /* confirm MII not busy */ | ||
139 | if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) { | ||
140 | smsc_warn(DRV, "MII is busy???"); | ||
141 | goto out; | ||
142 | } | ||
143 | |||
144 | /* set the address, index & direction (read from PHY) */ | ||
145 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | | ||
146 | MII_ACCESS_MII_READ_; | ||
147 | smsc9420_reg_write(pd, MII_ACCESS, addr); | ||
148 | |||
149 | /* wait for read to complete with 50us timeout */ | ||
150 | for (i = 0; i < 5; i++) { | ||
151 | if (!(smsc9420_reg_read(pd, MII_ACCESS) & | ||
152 | MII_ACCESS_MII_BUSY_)) { | ||
153 | reg = (u16)smsc9420_reg_read(pd, MII_DATA); | ||
154 | goto out; | ||
155 | } | ||
156 | udelay(10); | ||
157 | } | ||
158 | |||
159 | smsc_warn(DRV, "MII busy timeout!"); | ||
160 | |||
161 | out: | ||
162 | spin_unlock_irqrestore(&pd->phy_lock, flags); | ||
163 | return reg; | ||
164 | } | ||
165 | |||
166 | static int smsc9420_mii_write(struct mii_bus *bus, int phyaddr, int regidx, | ||
167 | u16 val) | ||
168 | { | ||
169 | struct smsc9420_pdata *pd = (struct smsc9420_pdata *)bus->priv; | ||
170 | unsigned long flags; | ||
171 | u32 addr; | ||
172 | int i, reg = -EIO; | ||
173 | |||
174 | spin_lock_irqsave(&pd->phy_lock, flags); | ||
175 | |||
176 | /* confirm MII not busy */ | ||
177 | if ((smsc9420_reg_read(pd, MII_ACCESS) & MII_ACCESS_MII_BUSY_)) { | ||
178 | smsc_warn(DRV, "MII is busy???"); | ||
179 | goto out; | ||
180 | } | ||
181 | |||
182 | /* put the data to write in the MAC */ | ||
183 | smsc9420_reg_write(pd, MII_DATA, (u32)val); | ||
184 | |||
185 | /* set the address, index & direction (write to PHY) */ | ||
186 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | | ||
187 | MII_ACCESS_MII_WRITE_; | ||
188 | smsc9420_reg_write(pd, MII_ACCESS, addr); | ||
189 | |||
190 | /* wait for write to complete with 50us timeout */ | ||
191 | for (i = 0; i < 5; i++) { | ||
192 | if (!(smsc9420_reg_read(pd, MII_ACCESS) & | ||
193 | MII_ACCESS_MII_BUSY_)) { | ||
194 | reg = 0; | ||
195 | goto out; | ||
196 | } | ||
197 | udelay(10); | ||
198 | } | ||
199 | |||
200 | smsc_warn(DRV, "MII busy timeout!"); | ||
201 | |||
202 | out: | ||
203 | spin_unlock_irqrestore(&pd->phy_lock, flags); | ||
204 | return reg; | ||
205 | } | ||
206 | |||
207 | /* Returns hash bit number for given MAC address | ||
208 | * Example: | ||
209 | * 01 00 5E 00 00 01 -> returns bit number 31 */ | ||
210 | static u32 smsc9420_hash(u8 addr[ETH_ALEN]) | ||
211 | { | ||
212 | return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; | ||
213 | } | ||
214 | |||
215 | static int smsc9420_eeprom_reload(struct smsc9420_pdata *pd) | ||
216 | { | ||
217 | int timeout = 100000; | ||
218 | |||
219 | BUG_ON(!pd); | ||
220 | |||
221 | if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) { | ||
222 | smsc_dbg(DRV, "smsc9420_eeprom_reload: Eeprom busy"); | ||
223 | return -EIO; | ||
224 | } | ||
225 | |||
226 | smsc9420_reg_write(pd, E2P_CMD, | ||
227 | (E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_RELOAD_)); | ||
228 | |||
229 | do { | ||
230 | udelay(10); | ||
231 | if (!(smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_)) | ||
232 | return 0; | ||
233 | } while (timeout--); | ||
234 | |||
235 | smsc_warn(DRV, "smsc9420_eeprom_reload: Eeprom timed out"); | ||
236 | return -EIO; | ||
237 | } | ||
238 | |||
239 | /* Standard ioctls for mii-tool */ | ||
240 | static int smsc9420_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) | ||
241 | { | ||
242 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
243 | |||
244 | if (!netif_running(dev) || !pd->phy_dev) | ||
245 | return -EINVAL; | ||
246 | |||
247 | return phy_mii_ioctl(pd->phy_dev, if_mii(ifr), cmd); | ||
248 | } | ||
249 | |||
250 | static int smsc9420_ethtool_get_settings(struct net_device *dev, | ||
251 | struct ethtool_cmd *cmd) | ||
252 | { | ||
253 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
254 | |||
255 | cmd->maxtxpkt = 1; | ||
256 | cmd->maxrxpkt = 1; | ||
257 | return phy_ethtool_gset(pd->phy_dev, cmd); | ||
258 | } | ||
259 | |||
260 | static int smsc9420_ethtool_set_settings(struct net_device *dev, | ||
261 | struct ethtool_cmd *cmd) | ||
262 | { | ||
263 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
264 | |||
265 | return phy_ethtool_sset(pd->phy_dev, cmd); | ||
266 | } | ||
267 | |||
268 | static void smsc9420_ethtool_get_drvinfo(struct net_device *netdev, | ||
269 | struct ethtool_drvinfo *drvinfo) | ||
270 | { | ||
271 | struct smsc9420_pdata *pd = netdev_priv(netdev); | ||
272 | |||
273 | strcpy(drvinfo->driver, DRV_NAME); | ||
274 | strcpy(drvinfo->bus_info, pci_name(pd->pdev)); | ||
275 | strcpy(drvinfo->version, DRV_VERSION); | ||
276 | } | ||
277 | |||
278 | static u32 smsc9420_ethtool_get_msglevel(struct net_device *netdev) | ||
279 | { | ||
280 | struct smsc9420_pdata *pd = netdev_priv(netdev); | ||
281 | return pd->msg_enable; | ||
282 | } | ||
283 | |||
284 | static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data) | ||
285 | { | ||
286 | struct smsc9420_pdata *pd = netdev_priv(netdev); | ||
287 | pd->msg_enable = data; | ||
288 | } | ||
289 | |||
290 | static int smsc9420_ethtool_nway_reset(struct net_device *netdev) | ||
291 | { | ||
292 | struct smsc9420_pdata *pd = netdev_priv(netdev); | ||
293 | return phy_start_aneg(pd->phy_dev); | ||
294 | } | ||
295 | |||
296 | static const struct ethtool_ops smsc9420_ethtool_ops = { | ||
297 | .get_settings = smsc9420_ethtool_get_settings, | ||
298 | .set_settings = smsc9420_ethtool_set_settings, | ||
299 | .get_drvinfo = smsc9420_ethtool_get_drvinfo, | ||
300 | .get_msglevel = smsc9420_ethtool_get_msglevel, | ||
301 | .set_msglevel = smsc9420_ethtool_set_msglevel, | ||
302 | .nway_reset = smsc9420_ethtool_nway_reset, | ||
303 | .get_link = ethtool_op_get_link, | ||
304 | }; | ||
305 | |||
306 | /* Sets the device MAC address to dev_addr */ | ||
307 | static void smsc9420_set_mac_address(struct net_device *dev) | ||
308 | { | ||
309 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
310 | u8 *dev_addr = dev->dev_addr; | ||
311 | u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; | ||
312 | u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | | ||
313 | (dev_addr[1] << 8) | dev_addr[0]; | ||
314 | |||
315 | smsc9420_reg_write(pd, ADDRH, mac_high16); | ||
316 | smsc9420_reg_write(pd, ADDRL, mac_low32); | ||
317 | } | ||
318 | |||
319 | static void smsc9420_check_mac_address(struct net_device *dev) | ||
320 | { | ||
321 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
322 | |||
323 | /* Check if mac address has been specified when bringing interface up */ | ||
324 | if (is_valid_ether_addr(dev->dev_addr)) { | ||
325 | smsc9420_set_mac_address(dev); | ||
326 | smsc_dbg(PROBE, "MAC Address is specified by configuration"); | ||
327 | } else { | ||
328 | /* Try reading mac address from device. if EEPROM is present | ||
329 | * it will already have been set */ | ||
330 | u32 mac_high16 = smsc9420_reg_read(pd, ADDRH); | ||
331 | u32 mac_low32 = smsc9420_reg_read(pd, ADDRL); | ||
332 | dev->dev_addr[0] = (u8)(mac_low32); | ||
333 | dev->dev_addr[1] = (u8)(mac_low32 >> 8); | ||
334 | dev->dev_addr[2] = (u8)(mac_low32 >> 16); | ||
335 | dev->dev_addr[3] = (u8)(mac_low32 >> 24); | ||
336 | dev->dev_addr[4] = (u8)(mac_high16); | ||
337 | dev->dev_addr[5] = (u8)(mac_high16 >> 8); | ||
338 | |||
339 | if (is_valid_ether_addr(dev->dev_addr)) { | ||
340 | /* eeprom values are valid so use them */ | ||
341 | smsc_dbg(PROBE, "Mac Address is read from EEPROM"); | ||
342 | } else { | ||
343 | /* eeprom values are invalid, generate random MAC */ | ||
344 | random_ether_addr(dev->dev_addr); | ||
345 | smsc9420_set_mac_address(dev); | ||
346 | smsc_dbg(PROBE, | ||
347 | "MAC Address is set to random_ether_addr"); | ||
348 | } | ||
349 | } | ||
350 | } | ||
351 | |||
352 | static void smsc9420_stop_tx(struct smsc9420_pdata *pd) | ||
353 | { | ||
354 | u32 dmac_control, mac_cr, dma_intr_ena; | ||
355 | int timeOut = 1000; | ||
356 | |||
357 | /* disable TX DMAC */ | ||
358 | dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); | ||
359 | dmac_control &= (~DMAC_CONTROL_ST_); | ||
360 | smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); | ||
361 | |||
362 | /* Wait max 10ms for transmit process to stop */ | ||
363 | while (timeOut--) { | ||
364 | if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_TS_) | ||
365 | break; | ||
366 | udelay(10); | ||
367 | } | ||
368 | |||
369 | if (!timeOut) | ||
370 | smsc_warn(IFDOWN, "TX DMAC failed to stop"); | ||
371 | |||
372 | /* ACK Tx DMAC stop bit */ | ||
373 | smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_TXPS_); | ||
374 | |||
375 | /* mask TX DMAC interrupts */ | ||
376 | dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); | ||
377 | dma_intr_ena &= ~(DMAC_INTR_ENA_TX_); | ||
378 | smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); | ||
379 | smsc9420_pci_flush_write(pd); | ||
380 | |||
381 | /* stop MAC TX */ | ||
382 | mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_TXEN_); | ||
383 | smsc9420_reg_write(pd, MAC_CR, mac_cr); | ||
384 | smsc9420_pci_flush_write(pd); | ||
385 | } | ||
386 | |||
387 | static void smsc9420_free_tx_ring(struct smsc9420_pdata *pd) | ||
388 | { | ||
389 | int i; | ||
390 | |||
391 | BUG_ON(!pd->tx_ring); | ||
392 | |||
393 | if (!pd->tx_buffers) | ||
394 | return; | ||
395 | |||
396 | for (i = 0; i < TX_RING_SIZE; i++) { | ||
397 | struct sk_buff *skb = pd->tx_buffers[i].skb; | ||
398 | |||
399 | if (skb) { | ||
400 | BUG_ON(!pd->tx_buffers[i].mapping); | ||
401 | pci_unmap_single(pd->pdev, pd->tx_buffers[i].mapping, | ||
402 | skb->len, PCI_DMA_TODEVICE); | ||
403 | dev_kfree_skb_any(skb); | ||
404 | } | ||
405 | |||
406 | pd->tx_ring[i].status = 0; | ||
407 | pd->tx_ring[i].length = 0; | ||
408 | pd->tx_ring[i].buffer1 = 0; | ||
409 | pd->tx_ring[i].buffer2 = 0; | ||
410 | } | ||
411 | wmb(); | ||
412 | |||
413 | kfree(pd->tx_buffers); | ||
414 | pd->tx_buffers = NULL; | ||
415 | |||
416 | pd->tx_ring_head = 0; | ||
417 | pd->tx_ring_tail = 0; | ||
418 | } | ||
419 | |||
420 | static void smsc9420_free_rx_ring(struct smsc9420_pdata *pd) | ||
421 | { | ||
422 | int i; | ||
423 | |||
424 | BUG_ON(!pd->rx_ring); | ||
425 | |||
426 | if (!pd->rx_buffers) | ||
427 | return; | ||
428 | |||
429 | for (i = 0; i < RX_RING_SIZE; i++) { | ||
430 | if (pd->rx_buffers[i].skb) | ||
431 | dev_kfree_skb_any(pd->rx_buffers[i].skb); | ||
432 | |||
433 | if (pd->rx_buffers[i].mapping) | ||
434 | pci_unmap_single(pd->pdev, pd->rx_buffers[i].mapping, | ||
435 | PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | ||
436 | |||
437 | pd->rx_ring[i].status = 0; | ||
438 | pd->rx_ring[i].length = 0; | ||
439 | pd->rx_ring[i].buffer1 = 0; | ||
440 | pd->rx_ring[i].buffer2 = 0; | ||
441 | } | ||
442 | wmb(); | ||
443 | |||
444 | kfree(pd->rx_buffers); | ||
445 | pd->rx_buffers = NULL; | ||
446 | |||
447 | pd->rx_ring_head = 0; | ||
448 | pd->rx_ring_tail = 0; | ||
449 | } | ||
450 | |||
451 | static void smsc9420_stop_rx(struct smsc9420_pdata *pd) | ||
452 | { | ||
453 | int timeOut = 1000; | ||
454 | u32 mac_cr, dmac_control, dma_intr_ena; | ||
455 | |||
456 | /* mask RX DMAC interrupts */ | ||
457 | dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); | ||
458 | dma_intr_ena &= (~DMAC_INTR_ENA_RX_); | ||
459 | smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); | ||
460 | smsc9420_pci_flush_write(pd); | ||
461 | |||
462 | /* stop RX MAC prior to stoping DMA */ | ||
463 | mac_cr = smsc9420_reg_read(pd, MAC_CR) & (~MAC_CR_RXEN_); | ||
464 | smsc9420_reg_write(pd, MAC_CR, mac_cr); | ||
465 | smsc9420_pci_flush_write(pd); | ||
466 | |||
467 | /* stop RX DMAC */ | ||
468 | dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); | ||
469 | dmac_control &= (~DMAC_CONTROL_SR_); | ||
470 | smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); | ||
471 | smsc9420_pci_flush_write(pd); | ||
472 | |||
473 | /* wait up to 10ms for receive to stop */ | ||
474 | while (timeOut--) { | ||
475 | if (smsc9420_reg_read(pd, DMAC_STATUS) & DMAC_STS_RS_) | ||
476 | break; | ||
477 | udelay(10); | ||
478 | } | ||
479 | |||
480 | if (!timeOut) | ||
481 | smsc_warn(IFDOWN, "RX DMAC did not stop! timeout."); | ||
482 | |||
483 | /* ACK the Rx DMAC stop bit */ | ||
484 | smsc9420_reg_write(pd, DMAC_STATUS, DMAC_STS_RXPS_); | ||
485 | } | ||
486 | |||
487 | static irqreturn_t smsc9420_isr(int irq, void *dev_id) | ||
488 | { | ||
489 | struct smsc9420_pdata *pd = dev_id; | ||
490 | u32 int_cfg, int_sts, int_ctl; | ||
491 | irqreturn_t ret = IRQ_NONE; | ||
492 | ulong flags; | ||
493 | |||
494 | BUG_ON(!pd); | ||
495 | BUG_ON(!pd->base_addr); | ||
496 | |||
497 | int_cfg = smsc9420_reg_read(pd, INT_CFG); | ||
498 | |||
499 | /* check if it's our interrupt */ | ||
500 | if ((int_cfg & (INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_)) != | ||
501 | (INT_CFG_IRQ_EN_ | INT_CFG_IRQ_INT_)) | ||
502 | return IRQ_NONE; | ||
503 | |||
504 | int_sts = smsc9420_reg_read(pd, INT_STAT); | ||
505 | |||
506 | if (likely(INT_STAT_DMAC_INT_ & int_sts)) { | ||
507 | u32 status = smsc9420_reg_read(pd, DMAC_STATUS); | ||
508 | u32 ints_to_clear = 0; | ||
509 | |||
510 | if (status & DMAC_STS_TX_) { | ||
511 | ints_to_clear |= (DMAC_STS_TX_ | DMAC_STS_NIS_); | ||
512 | netif_wake_queue(pd->dev); | ||
513 | } | ||
514 | |||
515 | if (status & DMAC_STS_RX_) { | ||
516 | /* mask RX DMAC interrupts */ | ||
517 | u32 dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); | ||
518 | dma_intr_ena &= (~DMAC_INTR_ENA_RX_); | ||
519 | smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); | ||
520 | smsc9420_pci_flush_write(pd); | ||
521 | |||
522 | ints_to_clear |= (DMAC_STS_RX_ | DMAC_STS_NIS_); | ||
523 | netif_rx_schedule(pd->dev, &pd->napi); | ||
524 | } | ||
525 | |||
526 | if (ints_to_clear) | ||
527 | smsc9420_reg_write(pd, DMAC_STATUS, ints_to_clear); | ||
528 | |||
529 | ret = IRQ_HANDLED; | ||
530 | } | ||
531 | |||
532 | if (unlikely(INT_STAT_SW_INT_ & int_sts)) { | ||
533 | /* mask software interrupt */ | ||
534 | spin_lock_irqsave(&pd->int_lock, flags); | ||
535 | int_ctl = smsc9420_reg_read(pd, INT_CTL); | ||
536 | int_ctl &= (~INT_CTL_SW_INT_EN_); | ||
537 | smsc9420_reg_write(pd, INT_CTL, int_ctl); | ||
538 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
539 | |||
540 | smsc9420_reg_write(pd, INT_STAT, INT_STAT_SW_INT_); | ||
541 | pd->software_irq_signal = true; | ||
542 | smp_wmb(); | ||
543 | |||
544 | ret = IRQ_HANDLED; | ||
545 | } | ||
546 | |||
547 | /* to ensure PCI write completion, we must perform a PCI read */ | ||
548 | smsc9420_pci_flush_write(pd); | ||
549 | |||
550 | return ret; | ||
551 | } | ||
552 | |||
553 | static void smsc9420_dmac_soft_reset(struct smsc9420_pdata *pd) | ||
554 | { | ||
555 | smsc9420_reg_write(pd, BUS_MODE, BUS_MODE_SWR_); | ||
556 | smsc9420_reg_read(pd, BUS_MODE); | ||
557 | udelay(2); | ||
558 | if (smsc9420_reg_read(pd, BUS_MODE) & BUS_MODE_SWR_) | ||
559 | smsc_warn(DRV, "Software reset not cleared"); | ||
560 | } | ||
561 | |||
562 | static int smsc9420_stop(struct net_device *dev) | ||
563 | { | ||
564 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
565 | u32 int_cfg; | ||
566 | ulong flags; | ||
567 | |||
568 | BUG_ON(!pd); | ||
569 | BUG_ON(!pd->phy_dev); | ||
570 | |||
571 | /* disable master interrupt */ | ||
572 | spin_lock_irqsave(&pd->int_lock, flags); | ||
573 | int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); | ||
574 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
575 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
576 | |||
577 | netif_tx_disable(dev); | ||
578 | napi_disable(&pd->napi); | ||
579 | |||
580 | smsc9420_stop_tx(pd); | ||
581 | smsc9420_free_tx_ring(pd); | ||
582 | |||
583 | smsc9420_stop_rx(pd); | ||
584 | smsc9420_free_rx_ring(pd); | ||
585 | |||
586 | free_irq(dev->irq, pd); | ||
587 | |||
588 | smsc9420_dmac_soft_reset(pd); | ||
589 | |||
590 | phy_stop(pd->phy_dev); | ||
591 | |||
592 | phy_disconnect(pd->phy_dev); | ||
593 | pd->phy_dev = NULL; | ||
594 | mdiobus_unregister(pd->mii_bus); | ||
595 | mdiobus_free(pd->mii_bus); | ||
596 | |||
597 | return 0; | ||
598 | } | ||
599 | |||
600 | static void smsc9420_rx_count_stats(struct net_device *dev, u32 desc_status) | ||
601 | { | ||
602 | if (unlikely(desc_status & RDES0_ERROR_SUMMARY_)) { | ||
603 | dev->stats.rx_errors++; | ||
604 | if (desc_status & RDES0_DESCRIPTOR_ERROR_) | ||
605 | dev->stats.rx_over_errors++; | ||
606 | else if (desc_status & (RDES0_FRAME_TOO_LONG_ | | ||
607 | RDES0_RUNT_FRAME_ | RDES0_COLLISION_SEEN_)) | ||
608 | dev->stats.rx_frame_errors++; | ||
609 | else if (desc_status & RDES0_CRC_ERROR_) | ||
610 | dev->stats.rx_crc_errors++; | ||
611 | } | ||
612 | |||
613 | if (unlikely(desc_status & RDES0_LENGTH_ERROR_)) | ||
614 | dev->stats.rx_length_errors++; | ||
615 | |||
616 | if (unlikely(!((desc_status & RDES0_LAST_DESCRIPTOR_) && | ||
617 | (desc_status & RDES0_FIRST_DESCRIPTOR_)))) | ||
618 | dev->stats.rx_length_errors++; | ||
619 | |||
620 | if (desc_status & RDES0_MULTICAST_FRAME_) | ||
621 | dev->stats.multicast++; | ||
622 | } | ||
623 | |||
624 | static void smsc9420_rx_handoff(struct smsc9420_pdata *pd, const int index, | ||
625 | const u32 status) | ||
626 | { | ||
627 | struct net_device *dev = pd->dev; | ||
628 | struct sk_buff *skb; | ||
629 | u16 packet_length = (status & RDES0_FRAME_LENGTH_MASK_) | ||
630 | >> RDES0_FRAME_LENGTH_SHFT_; | ||
631 | |||
632 | /* remove crc from packet lendth */ | ||
633 | packet_length -= 4; | ||
634 | |||
635 | if (pd->rx_csum) | ||
636 | packet_length -= 2; | ||
637 | |||
638 | dev->stats.rx_packets++; | ||
639 | dev->stats.rx_bytes += packet_length; | ||
640 | |||
641 | pci_unmap_single(pd->pdev, pd->rx_buffers[index].mapping, | ||
642 | PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | ||
643 | pd->rx_buffers[index].mapping = 0; | ||
644 | |||
645 | skb = pd->rx_buffers[index].skb; | ||
646 | pd->rx_buffers[index].skb = NULL; | ||
647 | |||
648 | if (pd->rx_csum) { | ||
649 | u16 hw_csum = get_unaligned_le16(skb_tail_pointer(skb) + | ||
650 | NET_IP_ALIGN + packet_length + 4); | ||
651 | put_unaligned_le16(cpu_to_le16(hw_csum), &skb->csum); | ||
652 | skb->ip_summed = CHECKSUM_COMPLETE; | ||
653 | } | ||
654 | |||
655 | skb_reserve(skb, NET_IP_ALIGN); | ||
656 | skb_put(skb, packet_length); | ||
657 | |||
658 | skb->protocol = eth_type_trans(skb, dev); | ||
659 | |||
660 | netif_receive_skb(skb); | ||
661 | dev->last_rx = jiffies; | ||
662 | } | ||
663 | |||
664 | static int smsc9420_alloc_rx_buffer(struct smsc9420_pdata *pd, int index) | ||
665 | { | ||
666 | struct sk_buff *skb = netdev_alloc_skb(pd->dev, PKT_BUF_SZ); | ||
667 | dma_addr_t mapping; | ||
668 | |||
669 | BUG_ON(pd->rx_buffers[index].skb); | ||
670 | BUG_ON(pd->rx_buffers[index].mapping); | ||
671 | |||
672 | if (unlikely(!skb)) { | ||
673 | smsc_warn(RX_ERR, "Failed to allocate new skb!"); | ||
674 | return -ENOMEM; | ||
675 | } | ||
676 | |||
677 | skb->dev = pd->dev; | ||
678 | |||
679 | mapping = pci_map_single(pd->pdev, skb_tail_pointer(skb), | ||
680 | PKT_BUF_SZ, PCI_DMA_FROMDEVICE); | ||
681 | if (pci_dma_mapping_error(pd->pdev, mapping)) { | ||
682 | dev_kfree_skb_any(skb); | ||
683 | smsc_warn(RX_ERR, "pci_map_single failed!"); | ||
684 | return -ENOMEM; | ||
685 | } | ||
686 | |||
687 | pd->rx_buffers[index].skb = skb; | ||
688 | pd->rx_buffers[index].mapping = mapping; | ||
689 | pd->rx_ring[index].buffer1 = mapping + NET_IP_ALIGN; | ||
690 | pd->rx_ring[index].status = RDES0_OWN_; | ||
691 | wmb(); | ||
692 | |||
693 | return 0; | ||
694 | } | ||
695 | |||
696 | static void smsc9420_alloc_new_rx_buffers(struct smsc9420_pdata *pd) | ||
697 | { | ||
698 | while (pd->rx_ring_tail != pd->rx_ring_head) { | ||
699 | if (smsc9420_alloc_rx_buffer(pd, pd->rx_ring_tail)) | ||
700 | break; | ||
701 | |||
702 | pd->rx_ring_tail = (pd->rx_ring_tail + 1) % RX_RING_SIZE; | ||
703 | } | ||
704 | } | ||
705 | |||
706 | static int smsc9420_rx_poll(struct napi_struct *napi, int budget) | ||
707 | { | ||
708 | struct smsc9420_pdata *pd = | ||
709 | container_of(napi, struct smsc9420_pdata, napi); | ||
710 | struct net_device *dev = pd->dev; | ||
711 | u32 drop_frame_cnt, dma_intr_ena, status; | ||
712 | int work_done; | ||
713 | |||
714 | for (work_done = 0; work_done < budget; work_done++) { | ||
715 | rmb(); | ||
716 | status = pd->rx_ring[pd->rx_ring_head].status; | ||
717 | |||
718 | /* stop if DMAC owns this dma descriptor */ | ||
719 | if (status & RDES0_OWN_) | ||
720 | break; | ||
721 | |||
722 | smsc9420_rx_count_stats(dev, status); | ||
723 | smsc9420_rx_handoff(pd, pd->rx_ring_head, status); | ||
724 | pd->rx_ring_head = (pd->rx_ring_head + 1) % RX_RING_SIZE; | ||
725 | smsc9420_alloc_new_rx_buffers(pd); | ||
726 | } | ||
727 | |||
728 | drop_frame_cnt = smsc9420_reg_read(pd, MISS_FRAME_CNTR); | ||
729 | dev->stats.rx_dropped += | ||
730 | (drop_frame_cnt & 0xFFFF) + ((drop_frame_cnt >> 17) & 0x3FF); | ||
731 | |||
732 | /* Kick RXDMA */ | ||
733 | smsc9420_reg_write(pd, RX_POLL_DEMAND, 1); | ||
734 | smsc9420_pci_flush_write(pd); | ||
735 | |||
736 | if (work_done < budget) { | ||
737 | netif_rx_complete(dev, &pd->napi); | ||
738 | |||
739 | /* re-enable RX DMA interrupts */ | ||
740 | dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); | ||
741 | dma_intr_ena |= (DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_); | ||
742 | smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); | ||
743 | smsc9420_pci_flush_write(pd); | ||
744 | } | ||
745 | return work_done; | ||
746 | } | ||
747 | |||
748 | static void | ||
749 | smsc9420_tx_update_stats(struct net_device *dev, u32 status, u32 length) | ||
750 | { | ||
751 | if (unlikely(status & TDES0_ERROR_SUMMARY_)) { | ||
752 | dev->stats.tx_errors++; | ||
753 | if (status & (TDES0_EXCESSIVE_DEFERRAL_ | | ||
754 | TDES0_EXCESSIVE_COLLISIONS_)) | ||
755 | dev->stats.tx_aborted_errors++; | ||
756 | |||
757 | if (status & (TDES0_LOSS_OF_CARRIER_ | TDES0_NO_CARRIER_)) | ||
758 | dev->stats.tx_carrier_errors++; | ||
759 | } else { | ||
760 | dev->stats.tx_packets++; | ||
761 | dev->stats.tx_bytes += (length & 0x7FF); | ||
762 | } | ||
763 | |||
764 | if (unlikely(status & TDES0_EXCESSIVE_COLLISIONS_)) { | ||
765 | dev->stats.collisions += 16; | ||
766 | } else { | ||
767 | dev->stats.collisions += | ||
768 | (status & TDES0_COLLISION_COUNT_MASK_) >> | ||
769 | TDES0_COLLISION_COUNT_SHFT_; | ||
770 | } | ||
771 | |||
772 | if (unlikely(status & TDES0_HEARTBEAT_FAIL_)) | ||
773 | dev->stats.tx_heartbeat_errors++; | ||
774 | } | ||
775 | |||
776 | /* Check for completed dma transfers, update stats and free skbs */ | ||
777 | static void smsc9420_complete_tx(struct net_device *dev) | ||
778 | { | ||
779 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
780 | |||
781 | while (pd->tx_ring_tail != pd->tx_ring_head) { | ||
782 | int index = pd->tx_ring_tail; | ||
783 | u32 status, length; | ||
784 | |||
785 | rmb(); | ||
786 | status = pd->tx_ring[index].status; | ||
787 | length = pd->tx_ring[index].length; | ||
788 | |||
789 | /* Check if DMA still owns this descriptor */ | ||
790 | if (unlikely(TDES0_OWN_ & status)) | ||
791 | break; | ||
792 | |||
793 | smsc9420_tx_update_stats(dev, status, length); | ||
794 | |||
795 | BUG_ON(!pd->tx_buffers[index].skb); | ||
796 | BUG_ON(!pd->tx_buffers[index].mapping); | ||
797 | |||
798 | pci_unmap_single(pd->pdev, pd->tx_buffers[index].mapping, | ||
799 | pd->tx_buffers[index].skb->len, PCI_DMA_TODEVICE); | ||
800 | pd->tx_buffers[index].mapping = 0; | ||
801 | |||
802 | dev_kfree_skb_any(pd->tx_buffers[index].skb); | ||
803 | pd->tx_buffers[index].skb = NULL; | ||
804 | |||
805 | pd->tx_ring[index].buffer1 = 0; | ||
806 | wmb(); | ||
807 | |||
808 | pd->tx_ring_tail = (pd->tx_ring_tail + 1) % TX_RING_SIZE; | ||
809 | } | ||
810 | } | ||
811 | |||
812 | static int smsc9420_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | ||
813 | { | ||
814 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
815 | dma_addr_t mapping; | ||
816 | int index = pd->tx_ring_head; | ||
817 | u32 tmp_desc1; | ||
818 | bool about_to_take_last_desc = | ||
819 | (((pd->tx_ring_head + 2) % TX_RING_SIZE) == pd->tx_ring_tail); | ||
820 | |||
821 | smsc9420_complete_tx(dev); | ||
822 | |||
823 | rmb(); | ||
824 | BUG_ON(pd->tx_ring[index].status & TDES0_OWN_); | ||
825 | BUG_ON(pd->tx_buffers[index].skb); | ||
826 | BUG_ON(pd->tx_buffers[index].mapping); | ||
827 | |||
828 | mapping = pci_map_single(pd->pdev, skb->data, | ||
829 | skb->len, PCI_DMA_TODEVICE); | ||
830 | if (pci_dma_mapping_error(pd->pdev, mapping)) { | ||
831 | smsc_warn(TX_ERR, "pci_map_single failed, dropping packet"); | ||
832 | return NETDEV_TX_BUSY; | ||
833 | } | ||
834 | |||
835 | pd->tx_buffers[index].skb = skb; | ||
836 | pd->tx_buffers[index].mapping = mapping; | ||
837 | |||
838 | tmp_desc1 = (TDES1_LS_ | ((u32)skb->len & 0x7FF)); | ||
839 | if (unlikely(about_to_take_last_desc)) { | ||
840 | tmp_desc1 |= TDES1_IC_; | ||
841 | netif_stop_queue(pd->dev); | ||
842 | } | ||
843 | |||
844 | /* check if we are at the last descriptor and need to set EOR */ | ||
845 | if (unlikely(index == (TX_RING_SIZE - 1))) | ||
846 | tmp_desc1 |= TDES1_TER_; | ||
847 | |||
848 | pd->tx_ring[index].buffer1 = mapping; | ||
849 | pd->tx_ring[index].length = tmp_desc1; | ||
850 | wmb(); | ||
851 | |||
852 | /* increment head */ | ||
853 | pd->tx_ring_head = (pd->tx_ring_head + 1) % TX_RING_SIZE; | ||
854 | |||
855 | /* assign ownership to DMAC */ | ||
856 | pd->tx_ring[index].status = TDES0_OWN_; | ||
857 | wmb(); | ||
858 | |||
859 | /* kick the DMA */ | ||
860 | smsc9420_reg_write(pd, TX_POLL_DEMAND, 1); | ||
861 | smsc9420_pci_flush_write(pd); | ||
862 | |||
863 | dev->trans_start = jiffies; | ||
864 | |||
865 | return NETDEV_TX_OK; | ||
866 | } | ||
867 | |||
868 | static struct net_device_stats *smsc9420_get_stats(struct net_device *dev) | ||
869 | { | ||
870 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
871 | u32 counter = smsc9420_reg_read(pd, MISS_FRAME_CNTR); | ||
872 | dev->stats.rx_dropped += | ||
873 | (counter & 0x0000FFFF) + ((counter >> 17) & 0x000003FF); | ||
874 | return &dev->stats; | ||
875 | } | ||
876 | |||
877 | static void smsc9420_set_multicast_list(struct net_device *dev) | ||
878 | { | ||
879 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
880 | u32 mac_cr = smsc9420_reg_read(pd, MAC_CR); | ||
881 | |||
882 | if (dev->flags & IFF_PROMISC) { | ||
883 | smsc_dbg(HW, "Promiscuous Mode Enabled"); | ||
884 | mac_cr |= MAC_CR_PRMS_; | ||
885 | mac_cr &= (~MAC_CR_MCPAS_); | ||
886 | mac_cr &= (~MAC_CR_HPFILT_); | ||
887 | } else if (dev->flags & IFF_ALLMULTI) { | ||
888 | smsc_dbg(HW, "Receive all Multicast Enabled"); | ||
889 | mac_cr &= (~MAC_CR_PRMS_); | ||
890 | mac_cr |= MAC_CR_MCPAS_; | ||
891 | mac_cr &= (~MAC_CR_HPFILT_); | ||
892 | } else if (dev->mc_count > 0) { | ||
893 | struct dev_mc_list *mc_list = dev->mc_list; | ||
894 | u32 hash_lo = 0, hash_hi = 0; | ||
895 | |||
896 | smsc_dbg(HW, "Multicast filter enabled"); | ||
897 | while (mc_list) { | ||
898 | u32 bit_num = smsc9420_hash(mc_list->dmi_addr); | ||
899 | u32 mask = 1 << (bit_num & 0x1F); | ||
900 | |||
901 | if (bit_num & 0x20) | ||
902 | hash_hi |= mask; | ||
903 | else | ||
904 | hash_lo |= mask; | ||
905 | |||
906 | mc_list = mc_list->next; | ||
907 | } | ||
908 | smsc9420_reg_write(pd, HASHH, hash_hi); | ||
909 | smsc9420_reg_write(pd, HASHL, hash_lo); | ||
910 | |||
911 | mac_cr &= (~MAC_CR_PRMS_); | ||
912 | mac_cr &= (~MAC_CR_MCPAS_); | ||
913 | mac_cr |= MAC_CR_HPFILT_; | ||
914 | } else { | ||
915 | smsc_dbg(HW, "Receive own packets only."); | ||
916 | smsc9420_reg_write(pd, HASHH, 0); | ||
917 | smsc9420_reg_write(pd, HASHL, 0); | ||
918 | |||
919 | mac_cr &= (~MAC_CR_PRMS_); | ||
920 | mac_cr &= (~MAC_CR_MCPAS_); | ||
921 | mac_cr &= (~MAC_CR_HPFILT_); | ||
922 | } | ||
923 | |||
924 | smsc9420_reg_write(pd, MAC_CR, mac_cr); | ||
925 | smsc9420_pci_flush_write(pd); | ||
926 | } | ||
927 | |||
928 | static u8 smsc9420_resolve_flowctrl_fulldplx(u16 lcladv, u16 rmtadv) | ||
929 | { | ||
930 | u8 cap = 0; | ||
931 | |||
932 | if (lcladv & ADVERTISE_PAUSE_CAP) { | ||
933 | if (lcladv & ADVERTISE_PAUSE_ASYM) { | ||
934 | if (rmtadv & LPA_PAUSE_CAP) | ||
935 | cap = FLOW_CTRL_TX | FLOW_CTRL_RX; | ||
936 | else if (rmtadv & LPA_PAUSE_ASYM) | ||
937 | cap = FLOW_CTRL_RX; | ||
938 | } else { | ||
939 | if (rmtadv & LPA_PAUSE_CAP) | ||
940 | cap = FLOW_CTRL_TX | FLOW_CTRL_RX; | ||
941 | } | ||
942 | } else if (lcladv & ADVERTISE_PAUSE_ASYM) { | ||
943 | if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM)) | ||
944 | cap = FLOW_CTRL_TX; | ||
945 | } | ||
946 | |||
947 | return cap; | ||
948 | } | ||
949 | |||
950 | static void smsc9420_phy_update_flowcontrol(struct smsc9420_pdata *pd) | ||
951 | { | ||
952 | struct phy_device *phy_dev = pd->phy_dev; | ||
953 | u32 flow; | ||
954 | |||
955 | if (phy_dev->duplex == DUPLEX_FULL) { | ||
956 | u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); | ||
957 | u16 rmtadv = phy_read(phy_dev, MII_LPA); | ||
958 | u8 cap = smsc9420_resolve_flowctrl_fulldplx(lcladv, rmtadv); | ||
959 | |||
960 | if (cap & FLOW_CTRL_RX) | ||
961 | flow = 0xFFFF0002; | ||
962 | else | ||
963 | flow = 0; | ||
964 | |||
965 | smsc_info(LINK, "rx pause %s, tx pause %s", | ||
966 | (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), | ||
967 | (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); | ||
968 | } else { | ||
969 | smsc_info(LINK, "half duplex"); | ||
970 | flow = 0; | ||
971 | } | ||
972 | |||
973 | smsc9420_reg_write(pd, FLOW, flow); | ||
974 | } | ||
975 | |||
976 | /* Update link mode if anything has changed. Called periodically when the | ||
977 | * PHY is in polling mode, even if nothing has changed. */ | ||
978 | static void smsc9420_phy_adjust_link(struct net_device *dev) | ||
979 | { | ||
980 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
981 | struct phy_device *phy_dev = pd->phy_dev; | ||
982 | int carrier; | ||
983 | |||
984 | if (phy_dev->duplex != pd->last_duplex) { | ||
985 | u32 mac_cr = smsc9420_reg_read(pd, MAC_CR); | ||
986 | if (phy_dev->duplex) { | ||
987 | smsc_dbg(LINK, "full duplex mode"); | ||
988 | mac_cr |= MAC_CR_FDPX_; | ||
989 | } else { | ||
990 | smsc_dbg(LINK, "half duplex mode"); | ||
991 | mac_cr &= ~MAC_CR_FDPX_; | ||
992 | } | ||
993 | smsc9420_reg_write(pd, MAC_CR, mac_cr); | ||
994 | |||
995 | smsc9420_phy_update_flowcontrol(pd); | ||
996 | pd->last_duplex = phy_dev->duplex; | ||
997 | } | ||
998 | |||
999 | carrier = netif_carrier_ok(dev); | ||
1000 | if (carrier != pd->last_carrier) { | ||
1001 | if (carrier) | ||
1002 | smsc_dbg(LINK, "carrier OK"); | ||
1003 | else | ||
1004 | smsc_dbg(LINK, "no carrier"); | ||
1005 | pd->last_carrier = carrier; | ||
1006 | } | ||
1007 | } | ||
1008 | |||
1009 | static int smsc9420_mii_probe(struct net_device *dev) | ||
1010 | { | ||
1011 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
1012 | struct phy_device *phydev = NULL; | ||
1013 | |||
1014 | BUG_ON(pd->phy_dev); | ||
1015 | |||
1016 | /* Device only supports internal PHY at address 1 */ | ||
1017 | if (!pd->mii_bus->phy_map[1]) { | ||
1018 | pr_err("%s: no PHY found at address 1\n", dev->name); | ||
1019 | return -ENODEV; | ||
1020 | } | ||
1021 | |||
1022 | phydev = pd->mii_bus->phy_map[1]; | ||
1023 | smsc_info(PROBE, "PHY addr %d, phy_id 0x%08X", phydev->addr, | ||
1024 | phydev->phy_id); | ||
1025 | |||
1026 | phydev = phy_connect(dev, phydev->dev.bus_id, | ||
1027 | &smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII); | ||
1028 | |||
1029 | if (IS_ERR(phydev)) { | ||
1030 | pr_err("%s: Could not attach to PHY\n", dev->name); | ||
1031 | return PTR_ERR(phydev); | ||
1032 | } | ||
1033 | |||
1034 | pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", | ||
1035 | dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq); | ||
1036 | |||
1037 | /* mask with MAC supported features */ | ||
1038 | phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | | ||
1039 | SUPPORTED_Asym_Pause); | ||
1040 | phydev->advertising = phydev->supported; | ||
1041 | |||
1042 | pd->phy_dev = phydev; | ||
1043 | pd->last_duplex = -1; | ||
1044 | pd->last_carrier = -1; | ||
1045 | |||
1046 | return 0; | ||
1047 | } | ||
1048 | |||
1049 | static int smsc9420_mii_init(struct net_device *dev) | ||
1050 | { | ||
1051 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
1052 | int err = -ENXIO, i; | ||
1053 | |||
1054 | pd->mii_bus = mdiobus_alloc(); | ||
1055 | if (!pd->mii_bus) { | ||
1056 | err = -ENOMEM; | ||
1057 | goto err_out_1; | ||
1058 | } | ||
1059 | pd->mii_bus->name = DRV_MDIONAME; | ||
1060 | snprintf(pd->mii_bus->id, MII_BUS_ID_SIZE, "%x", | ||
1061 | (pd->pdev->bus->number << 8) | pd->pdev->devfn); | ||
1062 | pd->mii_bus->priv = pd; | ||
1063 | pd->mii_bus->read = smsc9420_mii_read; | ||
1064 | pd->mii_bus->write = smsc9420_mii_write; | ||
1065 | pd->mii_bus->irq = pd->phy_irq; | ||
1066 | for (i = 0; i < PHY_MAX_ADDR; ++i) | ||
1067 | pd->mii_bus->irq[i] = PHY_POLL; | ||
1068 | |||
1069 | /* Mask all PHYs except ID 1 (internal) */ | ||
1070 | pd->mii_bus->phy_mask = ~(1 << 1); | ||
1071 | |||
1072 | if (mdiobus_register(pd->mii_bus)) { | ||
1073 | smsc_warn(PROBE, "Error registering mii bus"); | ||
1074 | goto err_out_free_bus_2; | ||
1075 | } | ||
1076 | |||
1077 | if (smsc9420_mii_probe(dev) < 0) { | ||
1078 | smsc_warn(PROBE, "Error probing mii bus"); | ||
1079 | goto err_out_unregister_bus_3; | ||
1080 | } | ||
1081 | |||
1082 | return 0; | ||
1083 | |||
1084 | err_out_unregister_bus_3: | ||
1085 | mdiobus_unregister(pd->mii_bus); | ||
1086 | err_out_free_bus_2: | ||
1087 | mdiobus_free(pd->mii_bus); | ||
1088 | err_out_1: | ||
1089 | return err; | ||
1090 | } | ||
1091 | |||
1092 | static int smsc9420_alloc_tx_ring(struct smsc9420_pdata *pd) | ||
1093 | { | ||
1094 | int i; | ||
1095 | |||
1096 | BUG_ON(!pd->tx_ring); | ||
1097 | |||
1098 | pd->tx_buffers = kmalloc((sizeof(struct smsc9420_ring_info) * | ||
1099 | TX_RING_SIZE), GFP_KERNEL); | ||
1100 | if (!pd->tx_buffers) { | ||
1101 | smsc_warn(IFUP, "Failed to allocated tx_buffers"); | ||
1102 | return -ENOMEM; | ||
1103 | } | ||
1104 | |||
1105 | /* Initialize the TX Ring */ | ||
1106 | for (i = 0; i < TX_RING_SIZE; i++) { | ||
1107 | pd->tx_buffers[i].skb = NULL; | ||
1108 | pd->tx_buffers[i].mapping = 0; | ||
1109 | pd->tx_ring[i].status = 0; | ||
1110 | pd->tx_ring[i].length = 0; | ||
1111 | pd->tx_ring[i].buffer1 = 0; | ||
1112 | pd->tx_ring[i].buffer2 = 0; | ||
1113 | } | ||
1114 | pd->tx_ring[TX_RING_SIZE - 1].length = TDES1_TER_; | ||
1115 | wmb(); | ||
1116 | |||
1117 | pd->tx_ring_head = 0; | ||
1118 | pd->tx_ring_tail = 0; | ||
1119 | |||
1120 | smsc9420_reg_write(pd, TX_BASE_ADDR, pd->tx_dma_addr); | ||
1121 | smsc9420_pci_flush_write(pd); | ||
1122 | |||
1123 | return 0; | ||
1124 | } | ||
1125 | |||
1126 | static int smsc9420_alloc_rx_ring(struct smsc9420_pdata *pd) | ||
1127 | { | ||
1128 | int i; | ||
1129 | |||
1130 | BUG_ON(!pd->rx_ring); | ||
1131 | |||
1132 | pd->rx_buffers = kmalloc((sizeof(struct smsc9420_ring_info) * | ||
1133 | RX_RING_SIZE), GFP_KERNEL); | ||
1134 | if (pd->rx_buffers == NULL) { | ||
1135 | smsc_warn(IFUP, "Failed to allocated rx_buffers"); | ||
1136 | goto out; | ||
1137 | } | ||
1138 | |||
1139 | /* initialize the rx ring */ | ||
1140 | for (i = 0; i < RX_RING_SIZE; i++) { | ||
1141 | pd->rx_ring[i].status = 0; | ||
1142 | pd->rx_ring[i].length = PKT_BUF_SZ; | ||
1143 | pd->rx_ring[i].buffer2 = 0; | ||
1144 | pd->rx_buffers[i].skb = NULL; | ||
1145 | pd->rx_buffers[i].mapping = 0; | ||
1146 | } | ||
1147 | pd->rx_ring[RX_RING_SIZE - 1].length = (PKT_BUF_SZ | RDES1_RER_); | ||
1148 | |||
1149 | /* now allocate the entire ring of skbs */ | ||
1150 | for (i = 0; i < RX_RING_SIZE; i++) { | ||
1151 | if (smsc9420_alloc_rx_buffer(pd, i)) { | ||
1152 | smsc_warn(IFUP, "failed to allocate rx skb %d", i); | ||
1153 | goto out_free_rx_skbs; | ||
1154 | } | ||
1155 | } | ||
1156 | |||
1157 | pd->rx_ring_head = 0; | ||
1158 | pd->rx_ring_tail = 0; | ||
1159 | |||
1160 | smsc9420_reg_write(pd, VLAN1, ETH_P_8021Q); | ||
1161 | smsc_dbg(IFUP, "VLAN1 = 0x%08x", smsc9420_reg_read(pd, VLAN1)); | ||
1162 | |||
1163 | if (pd->rx_csum) { | ||
1164 | /* Enable RX COE */ | ||
1165 | u32 coe = smsc9420_reg_read(pd, COE_CR) | RX_COE_EN; | ||
1166 | smsc9420_reg_write(pd, COE_CR, coe); | ||
1167 | smsc_dbg(IFUP, "COE_CR = 0x%08x", coe); | ||
1168 | } | ||
1169 | |||
1170 | smsc9420_reg_write(pd, RX_BASE_ADDR, pd->rx_dma_addr); | ||
1171 | smsc9420_pci_flush_write(pd); | ||
1172 | |||
1173 | return 0; | ||
1174 | |||
1175 | out_free_rx_skbs: | ||
1176 | smsc9420_free_rx_ring(pd); | ||
1177 | out: | ||
1178 | return -ENOMEM; | ||
1179 | } | ||
1180 | |||
1181 | static int smsc9420_open(struct net_device *dev) | ||
1182 | { | ||
1183 | struct smsc9420_pdata *pd; | ||
1184 | u32 bus_mode, mac_cr, dmac_control, int_cfg, dma_intr_ena, int_ctl; | ||
1185 | unsigned long flags; | ||
1186 | int result = 0, timeout; | ||
1187 | |||
1188 | BUG_ON(!dev); | ||
1189 | pd = netdev_priv(dev); | ||
1190 | BUG_ON(!pd); | ||
1191 | |||
1192 | if (!is_valid_ether_addr(dev->dev_addr)) { | ||
1193 | smsc_warn(IFUP, "dev_addr is not a valid MAC address"); | ||
1194 | result = -EADDRNOTAVAIL; | ||
1195 | goto out_0; | ||
1196 | } | ||
1197 | |||
1198 | netif_carrier_off(dev); | ||
1199 | |||
1200 | /* disable, mask and acknowlege all interrupts */ | ||
1201 | spin_lock_irqsave(&pd->int_lock, flags); | ||
1202 | int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); | ||
1203 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
1204 | smsc9420_reg_write(pd, INT_CTL, 0); | ||
1205 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
1206 | smsc9420_reg_write(pd, DMAC_INTR_ENA, 0); | ||
1207 | smsc9420_reg_write(pd, INT_STAT, 0xFFFFFFFF); | ||
1208 | smsc9420_pci_flush_write(pd); | ||
1209 | |||
1210 | if (request_irq(dev->irq, smsc9420_isr, IRQF_SHARED | IRQF_DISABLED, | ||
1211 | DRV_NAME, pd)) { | ||
1212 | smsc_warn(IFUP, "Unable to use IRQ = %d", dev->irq); | ||
1213 | result = -ENODEV; | ||
1214 | goto out_0; | ||
1215 | } | ||
1216 | |||
1217 | smsc9420_dmac_soft_reset(pd); | ||
1218 | |||
1219 | /* make sure MAC_CR is sane */ | ||
1220 | smsc9420_reg_write(pd, MAC_CR, 0); | ||
1221 | |||
1222 | smsc9420_set_mac_address(dev); | ||
1223 | |||
1224 | /* Configure GPIO pins to drive LEDs */ | ||
1225 | smsc9420_reg_write(pd, GPIO_CFG, | ||
1226 | (GPIO_CFG_LED_3_ | GPIO_CFG_LED_2_ | GPIO_CFG_LED_1_)); | ||
1227 | |||
1228 | bus_mode = BUS_MODE_DMA_BURST_LENGTH_16; | ||
1229 | |||
1230 | #ifdef __BIG_ENDIAN | ||
1231 | bus_mode |= BUS_MODE_DBO_; | ||
1232 | #endif | ||
1233 | |||
1234 | smsc9420_reg_write(pd, BUS_MODE, bus_mode); | ||
1235 | |||
1236 | smsc9420_pci_flush_write(pd); | ||
1237 | |||
1238 | /* set bus master bridge arbitration priority for Rx and TX DMA */ | ||
1239 | smsc9420_reg_write(pd, BUS_CFG, BUS_CFG_RXTXWEIGHT_4_1); | ||
1240 | |||
1241 | smsc9420_reg_write(pd, DMAC_CONTROL, | ||
1242 | (DMAC_CONTROL_SF_ | DMAC_CONTROL_OSF_)); | ||
1243 | |||
1244 | smsc9420_pci_flush_write(pd); | ||
1245 | |||
1246 | /* test the IRQ connection to the ISR */ | ||
1247 | smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); | ||
1248 | |||
1249 | spin_lock_irqsave(&pd->int_lock, flags); | ||
1250 | /* configure interrupt deassertion timer and enable interrupts */ | ||
1251 | int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_; | ||
1252 | int_cfg &= ~(INT_CFG_INT_DEAS_MASK); | ||
1253 | int_cfg |= (INT_DEAS_TIME & INT_CFG_INT_DEAS_MASK); | ||
1254 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
1255 | |||
1256 | /* unmask software interrupt */ | ||
1257 | int_ctl = smsc9420_reg_read(pd, INT_CTL) | INT_CTL_SW_INT_EN_; | ||
1258 | smsc9420_reg_write(pd, INT_CTL, int_ctl); | ||
1259 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
1260 | smsc9420_pci_flush_write(pd); | ||
1261 | |||
1262 | timeout = 1000; | ||
1263 | pd->software_irq_signal = false; | ||
1264 | smp_wmb(); | ||
1265 | while (timeout--) { | ||
1266 | if (pd->software_irq_signal) | ||
1267 | break; | ||
1268 | msleep(1); | ||
1269 | } | ||
1270 | |||
1271 | /* disable interrupts */ | ||
1272 | spin_lock_irqsave(&pd->int_lock, flags); | ||
1273 | int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); | ||
1274 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
1275 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
1276 | |||
1277 | if (!pd->software_irq_signal) { | ||
1278 | smsc_warn(IFUP, "ISR failed signaling test"); | ||
1279 | result = -ENODEV; | ||
1280 | goto out_free_irq_1; | ||
1281 | } | ||
1282 | |||
1283 | smsc_dbg(IFUP, "ISR passed test using IRQ %d", dev->irq); | ||
1284 | |||
1285 | result = smsc9420_alloc_tx_ring(pd); | ||
1286 | if (result) { | ||
1287 | smsc_warn(IFUP, "Failed to Initialize tx dma ring"); | ||
1288 | result = -ENOMEM; | ||
1289 | goto out_free_irq_1; | ||
1290 | } | ||
1291 | |||
1292 | result = smsc9420_alloc_rx_ring(pd); | ||
1293 | if (result) { | ||
1294 | smsc_warn(IFUP, "Failed to Initialize rx dma ring"); | ||
1295 | result = -ENOMEM; | ||
1296 | goto out_free_tx_ring_2; | ||
1297 | } | ||
1298 | |||
1299 | result = smsc9420_mii_init(dev); | ||
1300 | if (result) { | ||
1301 | smsc_warn(IFUP, "Failed to initialize Phy"); | ||
1302 | result = -ENODEV; | ||
1303 | goto out_free_rx_ring_3; | ||
1304 | } | ||
1305 | |||
1306 | /* Bring the PHY up */ | ||
1307 | phy_start(pd->phy_dev); | ||
1308 | |||
1309 | napi_enable(&pd->napi); | ||
1310 | |||
1311 | /* start tx and rx */ | ||
1312 | mac_cr = smsc9420_reg_read(pd, MAC_CR) | MAC_CR_TXEN_ | MAC_CR_RXEN_; | ||
1313 | smsc9420_reg_write(pd, MAC_CR, mac_cr); | ||
1314 | |||
1315 | dmac_control = smsc9420_reg_read(pd, DMAC_CONTROL); | ||
1316 | dmac_control |= DMAC_CONTROL_ST_ | DMAC_CONTROL_SR_; | ||
1317 | smsc9420_reg_write(pd, DMAC_CONTROL, dmac_control); | ||
1318 | smsc9420_pci_flush_write(pd); | ||
1319 | |||
1320 | dma_intr_ena = smsc9420_reg_read(pd, DMAC_INTR_ENA); | ||
1321 | dma_intr_ena |= | ||
1322 | (DMAC_INTR_ENA_TX_ | DMAC_INTR_ENA_RX_ | DMAC_INTR_ENA_NIS_); | ||
1323 | smsc9420_reg_write(pd, DMAC_INTR_ENA, dma_intr_ena); | ||
1324 | smsc9420_pci_flush_write(pd); | ||
1325 | |||
1326 | netif_wake_queue(dev); | ||
1327 | |||
1328 | smsc9420_reg_write(pd, RX_POLL_DEMAND, 1); | ||
1329 | |||
1330 | /* enable interrupts */ | ||
1331 | spin_lock_irqsave(&pd->int_lock, flags); | ||
1332 | int_cfg = smsc9420_reg_read(pd, INT_CFG) | INT_CFG_IRQ_EN_; | ||
1333 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
1334 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
1335 | |||
1336 | return 0; | ||
1337 | |||
1338 | out_free_rx_ring_3: | ||
1339 | smsc9420_free_rx_ring(pd); | ||
1340 | out_free_tx_ring_2: | ||
1341 | smsc9420_free_tx_ring(pd); | ||
1342 | out_free_irq_1: | ||
1343 | free_irq(dev->irq, pd); | ||
1344 | out_0: | ||
1345 | return result; | ||
1346 | } | ||
1347 | |||
1348 | #ifdef CONFIG_PM | ||
1349 | |||
1350 | static int smsc9420_suspend(struct pci_dev *pdev, pm_message_t state) | ||
1351 | { | ||
1352 | struct net_device *dev = pci_get_drvdata(pdev); | ||
1353 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
1354 | u32 int_cfg; | ||
1355 | ulong flags; | ||
1356 | |||
1357 | /* disable interrupts */ | ||
1358 | spin_lock_irqsave(&pd->int_lock, flags); | ||
1359 | int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); | ||
1360 | smsc9420_reg_write(pd, INT_CFG, int_cfg); | ||
1361 | spin_unlock_irqrestore(&pd->int_lock, flags); | ||
1362 | |||
1363 | if (netif_running(dev)) { | ||
1364 | netif_tx_disable(dev); | ||
1365 | smsc9420_stop_tx(pd); | ||
1366 | smsc9420_free_tx_ring(pd); | ||
1367 | |||
1368 | napi_disable(&pd->napi); | ||
1369 | smsc9420_stop_rx(pd); | ||
1370 | smsc9420_free_rx_ring(pd); | ||
1371 | |||
1372 | free_irq(dev->irq, pd); | ||
1373 | |||
1374 | netif_device_detach(dev); | ||
1375 | } | ||
1376 | |||
1377 | pci_save_state(pdev); | ||
1378 | pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); | ||
1379 | pci_disable_device(pdev); | ||
1380 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); | ||
1381 | |||
1382 | return 0; | ||
1383 | } | ||
1384 | |||
1385 | static int smsc9420_resume(struct pci_dev *pdev) | ||
1386 | { | ||
1387 | struct net_device *dev = pci_get_drvdata(pdev); | ||
1388 | struct smsc9420_pdata *pd = netdev_priv(dev); | ||
1389 | int err; | ||
1390 | |||
1391 | pci_set_power_state(pdev, PCI_D0); | ||
1392 | pci_restore_state(pdev); | ||
1393 | |||
1394 | err = pci_enable_device(pdev); | ||
1395 | if (err) | ||
1396 | return err; | ||
1397 | |||
1398 | pci_set_master(pdev); | ||
1399 | |||
1400 | err = pci_enable_wake(pdev, 0, 0); | ||
1401 | if (err) | ||
1402 | smsc_warn(IFUP, "pci_enable_wake failed: %d", err); | ||
1403 | |||
1404 | if (netif_running(dev)) { | ||
1405 | err = smsc9420_open(dev); | ||
1406 | netif_device_attach(dev); | ||
1407 | } | ||
1408 | return err; | ||
1409 | } | ||
1410 | |||
1411 | #endif /* CONFIG_PM */ | ||
1412 | |||
1413 | static const struct net_device_ops smsc9420_netdev_ops = { | ||
1414 | .ndo_open = smsc9420_open, | ||
1415 | .ndo_stop = smsc9420_stop, | ||
1416 | .ndo_start_xmit = smsc9420_hard_start_xmit, | ||
1417 | .ndo_get_stats = smsc9420_get_stats, | ||
1418 | .ndo_set_multicast_list = smsc9420_set_multicast_list, | ||
1419 | .ndo_do_ioctl = smsc9420_do_ioctl, | ||
1420 | .ndo_validate_addr = eth_validate_addr, | ||
1421 | }; | ||
1422 | |||
1423 | static int __devinit | ||
1424 | smsc9420_probe(struct pci_dev *pdev, const struct pci_device_id *id) | ||
1425 | { | ||
1426 | struct net_device *dev; | ||
1427 | struct smsc9420_pdata *pd; | ||
1428 | void __iomem *virt_addr; | ||
1429 | int result = 0; | ||
1430 | u32 id_rev; | ||
1431 | |||
1432 | printk(KERN_INFO DRV_DESCRIPTION " version " DRV_VERSION "\n"); | ||
1433 | |||
1434 | /* First do the PCI initialisation */ | ||
1435 | result = pci_enable_device(pdev); | ||
1436 | if (unlikely(result)) { | ||
1437 | printk(KERN_ERR "Cannot enable smsc9420\n"); | ||
1438 | goto out_0; | ||
1439 | } | ||
1440 | |||
1441 | pci_set_master(pdev); | ||
1442 | |||
1443 | dev = alloc_etherdev(sizeof(*pd)); | ||
1444 | if (!dev) { | ||
1445 | printk(KERN_ERR "ether device alloc failed\n"); | ||
1446 | goto out_disable_pci_device_1; | ||
1447 | } | ||
1448 | |||
1449 | SET_NETDEV_DEV(dev, &pdev->dev); | ||
1450 | |||
1451 | if (!(pci_resource_flags(pdev, SMSC_BAR) & IORESOURCE_MEM)) { | ||
1452 | printk(KERN_ERR "Cannot find PCI device base address\n"); | ||
1453 | goto out_free_netdev_2; | ||
1454 | } | ||
1455 | |||
1456 | if ((pci_request_regions(pdev, DRV_NAME))) { | ||
1457 | printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n"); | ||
1458 | goto out_free_netdev_2; | ||
1459 | } | ||
1460 | |||
1461 | if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { | ||
1462 | printk(KERN_ERR "No usable DMA configuration, aborting.\n"); | ||
1463 | goto out_free_regions_3; | ||
1464 | } | ||
1465 | |||
1466 | virt_addr = ioremap(pci_resource_start(pdev, SMSC_BAR), | ||
1467 | pci_resource_len(pdev, SMSC_BAR)); | ||
1468 | if (!virt_addr) { | ||
1469 | printk(KERN_ERR "Cannot map device registers, aborting.\n"); | ||
1470 | goto out_free_regions_3; | ||
1471 | } | ||
1472 | |||
1473 | /* registers are double mapped with 0 offset for LE and 0x200 for BE */ | ||
1474 | virt_addr += LAN9420_CPSR_ENDIAN_OFFSET; | ||
1475 | |||
1476 | dev->base_addr = (ulong)virt_addr; | ||
1477 | |||
1478 | pd = netdev_priv(dev); | ||
1479 | |||
1480 | /* pci descriptors are created in the PCI consistent area */ | ||
1481 | pd->rx_ring = pci_alloc_consistent(pdev, | ||
1482 | sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE + | ||
1483 | sizeof(struct smsc9420_dma_desc) * TX_RING_SIZE, | ||
1484 | &pd->rx_dma_addr); | ||
1485 | |||
1486 | if (!pd->rx_ring) | ||
1487 | goto out_free_io_4; | ||
1488 | |||
1489 | /* descriptors are aligned due to the nature of pci_alloc_consistent */ | ||
1490 | pd->tx_ring = (struct smsc9420_dma_desc *) | ||
1491 | (pd->rx_ring + RX_RING_SIZE); | ||
1492 | pd->tx_dma_addr = pd->rx_dma_addr + | ||
1493 | sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE; | ||
1494 | |||
1495 | pd->pdev = pdev; | ||
1496 | pd->dev = dev; | ||
1497 | pd->base_addr = virt_addr; | ||
1498 | pd->msg_enable = smsc_debug; | ||
1499 | pd->rx_csum = true; | ||
1500 | |||
1501 | smsc_dbg(PROBE, "lan_base=0x%08lx", (ulong)virt_addr); | ||
1502 | |||
1503 | id_rev = smsc9420_reg_read(pd, ID_REV); | ||
1504 | switch (id_rev & 0xFFFF0000) { | ||
1505 | case 0x94200000: | ||
1506 | smsc_info(PROBE, "LAN9420 identified, ID_REV=0x%08X", id_rev); | ||
1507 | break; | ||
1508 | default: | ||
1509 | smsc_warn(PROBE, "LAN9420 NOT identified"); | ||
1510 | smsc_warn(PROBE, "ID_REV=0x%08X", id_rev); | ||
1511 | goto out_free_dmadesc_5; | ||
1512 | } | ||
1513 | |||
1514 | smsc9420_dmac_soft_reset(pd); | ||
1515 | smsc9420_eeprom_reload(pd); | ||
1516 | smsc9420_check_mac_address(dev); | ||
1517 | |||
1518 | dev->netdev_ops = &smsc9420_netdev_ops; | ||
1519 | dev->ethtool_ops = &smsc9420_ethtool_ops; | ||
1520 | dev->irq = pdev->irq; | ||
1521 | |||
1522 | netif_napi_add(dev, &pd->napi, smsc9420_rx_poll, NAPI_WEIGHT); | ||
1523 | |||
1524 | result = register_netdev(dev); | ||
1525 | if (result) { | ||
1526 | smsc_warn(PROBE, "error %i registering device", result); | ||
1527 | goto out_free_dmadesc_5; | ||
1528 | } | ||
1529 | |||
1530 | pci_set_drvdata(pdev, dev); | ||
1531 | |||
1532 | spin_lock_init(&pd->int_lock); | ||
1533 | spin_lock_init(&pd->phy_lock); | ||
1534 | |||
1535 | dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); | ||
1536 | |||
1537 | return 0; | ||
1538 | |||
1539 | out_free_dmadesc_5: | ||
1540 | pci_free_consistent(pdev, sizeof(struct smsc9420_dma_desc) * | ||
1541 | (RX_RING_SIZE + TX_RING_SIZE), pd->rx_ring, pd->rx_dma_addr); | ||
1542 | out_free_io_4: | ||
1543 | iounmap(virt_addr - LAN9420_CPSR_ENDIAN_OFFSET); | ||
1544 | out_free_regions_3: | ||
1545 | pci_release_regions(pdev); | ||
1546 | out_free_netdev_2: | ||
1547 | free_netdev(dev); | ||
1548 | out_disable_pci_device_1: | ||
1549 | pci_disable_device(pdev); | ||
1550 | out_0: | ||
1551 | return -ENODEV; | ||
1552 | } | ||
1553 | |||
1554 | static void __devexit smsc9420_remove(struct pci_dev *pdev) | ||
1555 | { | ||
1556 | struct net_device *dev; | ||
1557 | struct smsc9420_pdata *pd; | ||
1558 | |||
1559 | dev = pci_get_drvdata(pdev); | ||
1560 | if (!dev) | ||
1561 | return; | ||
1562 | |||
1563 | pci_set_drvdata(pdev, NULL); | ||
1564 | |||
1565 | pd = netdev_priv(dev); | ||
1566 | unregister_netdev(dev); | ||
1567 | |||
1568 | /* tx_buffers and rx_buffers are freed in stop */ | ||
1569 | BUG_ON(pd->tx_buffers); | ||
1570 | BUG_ON(pd->rx_buffers); | ||
1571 | |||
1572 | BUG_ON(!pd->tx_ring); | ||
1573 | BUG_ON(!pd->rx_ring); | ||
1574 | |||
1575 | pci_free_consistent(pdev, sizeof(struct smsc9420_dma_desc) * | ||
1576 | (RX_RING_SIZE + TX_RING_SIZE), pd->rx_ring, pd->rx_dma_addr); | ||
1577 | |||
1578 | iounmap(pd->base_addr - LAN9420_CPSR_ENDIAN_OFFSET); | ||
1579 | pci_release_regions(pdev); | ||
1580 | free_netdev(dev); | ||
1581 | pci_disable_device(pdev); | ||
1582 | } | ||
1583 | |||
1584 | static struct pci_driver smsc9420_driver = { | ||
1585 | .name = DRV_NAME, | ||
1586 | .id_table = smsc9420_id_table, | ||
1587 | .probe = smsc9420_probe, | ||
1588 | .remove = __devexit_p(smsc9420_remove), | ||
1589 | #ifdef CONFIG_PM | ||
1590 | .suspend = smsc9420_suspend, | ||
1591 | .resume = smsc9420_resume, | ||
1592 | #endif /* CONFIG_PM */ | ||
1593 | }; | ||
1594 | |||
1595 | static int __init smsc9420_init_module(void) | ||
1596 | { | ||
1597 | smsc_debug = netif_msg_init(debug, SMSC_MSG_DEFAULT); | ||
1598 | |||
1599 | return pci_register_driver(&smsc9420_driver); | ||
1600 | } | ||
1601 | |||
1602 | static void __exit smsc9420_exit_module(void) | ||
1603 | { | ||
1604 | pci_unregister_driver(&smsc9420_driver); | ||
1605 | } | ||
1606 | |||
1607 | module_init(smsc9420_init_module); | ||
1608 | module_exit(smsc9420_exit_module); | ||
diff --git a/drivers/net/smsc9420.h b/drivers/net/smsc9420.h new file mode 100644 index 000000000000..afda2d249eb6 --- /dev/null +++ b/drivers/net/smsc9420.h | |||
@@ -0,0 +1,275 @@ | |||
1 | /*************************************************************************** | ||
2 | * | ||
3 | * Copyright (C) 2007,2008 SMSC | ||
4 | * | ||
5 | * This program is free software; you can redistribute it and/or | ||
6 | * modify it under the terms of the GNU General Public License | ||
7 | * as published by the Free Software Foundation; either version 2 | ||
8 | * of the License, or (at your option) any later version. | ||
9 | * | ||
10 | * This program is distributed in the hope that it will be useful, | ||
11 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
12 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
13 | * GNU General Public License for more details. | ||
14 | * | ||
15 | * You should have received a copy of the GNU General Public License | ||
16 | * along with this program; if not, write to the Free Software | ||
17 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
18 | * | ||
19 | *************************************************************************** | ||
20 | */ | ||
21 | |||
22 | #ifndef _SMSC9420_H | ||
23 | #define _SMSC9420_H | ||
24 | |||
25 | #define TX_RING_SIZE (32) | ||
26 | #define RX_RING_SIZE (128) | ||
27 | |||
28 | /* interrupt deassertion in multiples of 10us */ | ||
29 | #define INT_DEAS_TIME (50) | ||
30 | |||
31 | #define NAPI_WEIGHT (64) | ||
32 | #define SMSC_BAR (3) | ||
33 | |||
34 | #ifdef __BIG_ENDIAN | ||
35 | /* Register set is duplicated for BE at an offset of 0x200 */ | ||
36 | #define LAN9420_CPSR_ENDIAN_OFFSET (0x200) | ||
37 | #else | ||
38 | #define LAN9420_CPSR_ENDIAN_OFFSET (0) | ||
39 | #endif | ||
40 | |||
41 | #define PCI_VENDOR_ID_9420 (0x1055) | ||
42 | #define PCI_DEVICE_ID_9420 (0xE420) | ||
43 | |||
44 | #define LAN_REGISTER_EXTENT (0x400) | ||
45 | |||
46 | #define FLOW_CTRL_TX (1) | ||
47 | #define FLOW_CTRL_RX (2) | ||
48 | |||
49 | #define PKT_BUF_SZ (VLAN_ETH_FRAME_LEN + NET_IP_ALIGN + 4) | ||
50 | |||
51 | /***********************************************/ | ||
52 | /* DMA Controller Control and Status Registers */ | ||
53 | /***********************************************/ | ||
54 | #define BUS_MODE (0x00) | ||
55 | #define BUS_MODE_SWR_ (BIT(0)) | ||
56 | #define BUS_MODE_DMA_BURST_LENGTH_1 (BIT(8)) | ||
57 | #define BUS_MODE_DMA_BURST_LENGTH_2 (BIT(9)) | ||
58 | #define BUS_MODE_DMA_BURST_LENGTH_4 (BIT(10)) | ||
59 | #define BUS_MODE_DMA_BURST_LENGTH_8 (BIT(11)) | ||
60 | #define BUS_MODE_DMA_BURST_LENGTH_16 (BIT(12)) | ||
61 | #define BUS_MODE_DMA_BURST_LENGTH_32 (BIT(13)) | ||
62 | #define BUS_MODE_DBO_ (BIT(20)) | ||
63 | |||
64 | #define TX_POLL_DEMAND (0x04) | ||
65 | |||
66 | #define RX_POLL_DEMAND (0x08) | ||
67 | |||
68 | #define RX_BASE_ADDR (0x0C) | ||
69 | |||
70 | #define TX_BASE_ADDR (0x10) | ||
71 | |||
72 | #define DMAC_STATUS (0x14) | ||
73 | #define DMAC_STS_TS_ (7 << 20) | ||
74 | #define DMAC_STS_RS_ (7 << 17) | ||
75 | #define DMAC_STS_NIS_ (BIT(16)) | ||
76 | #define DMAC_STS_AIS_ (BIT(15)) | ||
77 | #define DMAC_STS_RWT_ (BIT(9)) | ||
78 | #define DMAC_STS_RXPS_ (BIT(8)) | ||
79 | #define DMAC_STS_RXBU_ (BIT(7)) | ||
80 | #define DMAC_STS_RX_ (BIT(6)) | ||
81 | #define DMAC_STS_TXUNF_ (BIT(5)) | ||
82 | #define DMAC_STS_TXBU_ (BIT(2)) | ||
83 | #define DMAC_STS_TXPS_ (BIT(1)) | ||
84 | #define DMAC_STS_TX_ (BIT(0)) | ||
85 | |||
86 | #define DMAC_CONTROL (0x18) | ||
87 | #define DMAC_CONTROL_TTM_ (BIT(22)) | ||
88 | #define DMAC_CONTROL_SF_ (BIT(21)) | ||
89 | #define DMAC_CONTROL_ST_ (BIT(13)) | ||
90 | #define DMAC_CONTROL_OSF_ (BIT(2)) | ||
91 | #define DMAC_CONTROL_SR_ (BIT(1)) | ||
92 | |||
93 | #define DMAC_INTR_ENA (0x1C) | ||
94 | #define DMAC_INTR_ENA_NIS_ (BIT(16)) | ||
95 | #define DMAC_INTR_ENA_AIS_ (BIT(15)) | ||
96 | #define DMAC_INTR_ENA_RWT_ (BIT(9)) | ||
97 | #define DMAC_INTR_ENA_RXPS_ (BIT(8)) | ||
98 | #define DMAC_INTR_ENA_RXBU_ (BIT(7)) | ||
99 | #define DMAC_INTR_ENA_RX_ (BIT(6)) | ||
100 | #define DMAC_INTR_ENA_TXBU_ (BIT(2)) | ||
101 | #define DMAC_INTR_ENA_TXPS_ (BIT(1)) | ||
102 | #define DMAC_INTR_ENA_TX_ (BIT(0)) | ||
103 | |||
104 | #define MISS_FRAME_CNTR (0x20) | ||
105 | |||
106 | #define TX_BUFF_ADDR (0x50) | ||
107 | |||
108 | #define RX_BUFF_ADDR (0x54) | ||
109 | |||
110 | /* Transmit Descriptor Bit Defs */ | ||
111 | #define TDES0_OWN_ (0x80000000) | ||
112 | #define TDES0_ERROR_SUMMARY_ (0x00008000) | ||
113 | #define TDES0_LOSS_OF_CARRIER_ (0x00000800) | ||
114 | #define TDES0_NO_CARRIER_ (0x00000400) | ||
115 | #define TDES0_LATE_COLLISION_ (0x00000200) | ||
116 | #define TDES0_EXCESSIVE_COLLISIONS_ (0x00000100) | ||
117 | #define TDES0_HEARTBEAT_FAIL_ (0x00000080) | ||
118 | #define TDES0_COLLISION_COUNT_MASK_ (0x00000078) | ||
119 | #define TDES0_COLLISION_COUNT_SHFT_ (3) | ||
120 | #define TDES0_EXCESSIVE_DEFERRAL_ (0x00000004) | ||
121 | #define TDES0_DEFERRED_ (0x00000001) | ||
122 | |||
123 | #define TDES1_IC_ 0x80000000 | ||
124 | #define TDES1_LS_ 0x40000000 | ||
125 | #define TDES1_FS_ 0x20000000 | ||
126 | #define TDES1_TXCSEN_ 0x08000000 | ||
127 | #define TDES1_TER_ (BIT(25)) | ||
128 | #define TDES1_TCH_ 0x01000000 | ||
129 | |||
130 | /* Receive Descriptor 0 Bit Defs */ | ||
131 | #define RDES0_OWN_ (0x80000000) | ||
132 | #define RDES0_FRAME_LENGTH_MASK_ (0x07FF0000) | ||
133 | #define RDES0_FRAME_LENGTH_SHFT_ (16) | ||
134 | #define RDES0_ERROR_SUMMARY_ (0x00008000) | ||
135 | #define RDES0_DESCRIPTOR_ERROR_ (0x00004000) | ||
136 | #define RDES0_LENGTH_ERROR_ (0x00001000) | ||
137 | #define RDES0_RUNT_FRAME_ (0x00000800) | ||
138 | #define RDES0_MULTICAST_FRAME_ (0x00000400) | ||
139 | #define RDES0_FIRST_DESCRIPTOR_ (0x00000200) | ||
140 | #define RDES0_LAST_DESCRIPTOR_ (0x00000100) | ||
141 | #define RDES0_FRAME_TOO_LONG_ (0x00000080) | ||
142 | #define RDES0_COLLISION_SEEN_ (0x00000040) | ||
143 | #define RDES0_FRAME_TYPE_ (0x00000020) | ||
144 | #define RDES0_WATCHDOG_TIMEOUT_ (0x00000010) | ||
145 | #define RDES0_MII_ERROR_ (0x00000008) | ||
146 | #define RDES0_DRIBBLING_BIT_ (0x00000004) | ||
147 | #define RDES0_CRC_ERROR_ (0x00000002) | ||
148 | |||
149 | /* Receive Descriptor 1 Bit Defs */ | ||
150 | #define RDES1_RER_ (0x02000000) | ||
151 | |||
152 | /***********************************************/ | ||
153 | /* MAC Control and Status Registers */ | ||
154 | /***********************************************/ | ||
155 | #define MAC_CR (0x80) | ||
156 | #define MAC_CR_RXALL_ (0x80000000) | ||
157 | #define MAC_CR_DIS_RXOWN_ (0x00800000) | ||
158 | #define MAC_CR_LOOPBK_ (0x00200000) | ||
159 | #define MAC_CR_FDPX_ (0x00100000) | ||
160 | #define MAC_CR_MCPAS_ (0x00080000) | ||
161 | #define MAC_CR_PRMS_ (0x00040000) | ||
162 | #define MAC_CR_INVFILT_ (0x00020000) | ||
163 | #define MAC_CR_PASSBAD_ (0x00010000) | ||
164 | #define MAC_CR_HFILT_ (0x00008000) | ||
165 | #define MAC_CR_HPFILT_ (0x00002000) | ||
166 | #define MAC_CR_LCOLL_ (0x00001000) | ||
167 | #define MAC_CR_DIS_BCAST_ (0x00000800) | ||
168 | #define MAC_CR_DIS_RTRY_ (0x00000400) | ||
169 | #define MAC_CR_PADSTR_ (0x00000100) | ||
170 | #define MAC_CR_BOLMT_MSK (0x000000C0) | ||
171 | #define MAC_CR_MFCHK_ (0x00000020) | ||
172 | #define MAC_CR_TXEN_ (0x00000008) | ||
173 | #define MAC_CR_RXEN_ (0x00000004) | ||
174 | |||
175 | #define ADDRH (0x84) | ||
176 | |||
177 | #define ADDRL (0x88) | ||
178 | |||
179 | #define HASHH (0x8C) | ||
180 | |||
181 | #define HASHL (0x90) | ||
182 | |||
183 | #define MII_ACCESS (0x94) | ||
184 | #define MII_ACCESS_MII_BUSY_ (0x00000001) | ||
185 | #define MII_ACCESS_MII_WRITE_ (0x00000002) | ||
186 | #define MII_ACCESS_MII_READ_ (0x00000000) | ||
187 | #define MII_ACCESS_INDX_MSK_ (0x000007C0) | ||
188 | #define MII_ACCESS_PHYADDR_MSK_ (0x0000F8C0) | ||
189 | #define MII_ACCESS_INDX_SHFT_CNT (6) | ||
190 | #define MII_ACCESS_PHYADDR_SHFT_CNT (11) | ||
191 | |||
192 | #define MII_DATA (0x98) | ||
193 | |||
194 | #define FLOW (0x9C) | ||
195 | |||
196 | #define VLAN1 (0xA0) | ||
197 | |||
198 | #define VLAN2 (0xA4) | ||
199 | |||
200 | #define WUFF (0xA8) | ||
201 | |||
202 | #define WUCSR (0xAC) | ||
203 | |||
204 | #define COE_CR (0xB0) | ||
205 | #define TX_COE_EN (0x00010000) | ||
206 | #define RX_COE_MODE (0x00000002) | ||
207 | #define RX_COE_EN (0x00000001) | ||
208 | |||
209 | /***********************************************/ | ||
210 | /* System Control and Status Registers */ | ||
211 | /***********************************************/ | ||
212 | #define ID_REV (0xC0) | ||
213 | |||
214 | #define INT_CTL (0xC4) | ||
215 | #define INT_CTL_SW_INT_EN_ (0x00008000) | ||
216 | #define INT_CTL_SBERR_INT_EN_ (1 << 12) | ||
217 | #define INT_CTL_MBERR_INT_EN_ (1 << 13) | ||
218 | #define INT_CTL_GPT_INT_EN_ (0x00000008) | ||
219 | #define INT_CTL_PHY_INT_EN_ (0x00000004) | ||
220 | #define INT_CTL_WAKE_INT_EN_ (0x00000002) | ||
221 | |||
222 | #define INT_STAT (0xC8) | ||
223 | #define INT_STAT_SW_INT_ (1 << 15) | ||
224 | #define INT_STAT_MBERR_INT_ (1 << 13) | ||
225 | #define INT_STAT_SBERR_INT_ (1 << 12) | ||
226 | #define INT_STAT_GPT_INT_ (1 << 3) | ||
227 | #define INT_STAT_PHY_INT_ (0x00000004) | ||
228 | #define INT_STAT_WAKE_INT_ (0x00000002) | ||
229 | #define INT_STAT_DMAC_INT_ (0x00000001) | ||
230 | |||
231 | #define INT_CFG (0xCC) | ||
232 | #define INT_CFG_IRQ_INT_ (0x00080000) | ||
233 | #define INT_CFG_IRQ_EN_ (0x00040000) | ||
234 | #define INT_CFG_INT_DEAS_CLR_ (0x00000200) | ||
235 | #define INT_CFG_INT_DEAS_MASK (0x000000FF) | ||
236 | |||
237 | #define GPIO_CFG (0xD0) | ||
238 | #define GPIO_CFG_LED_3_ (0x40000000) | ||
239 | #define GPIO_CFG_LED_2_ (0x20000000) | ||
240 | #define GPIO_CFG_LED_1_ (0x10000000) | ||
241 | |||
242 | #define GPT_CFG (0xD4) | ||
243 | #define GPT_CFG_TIMER_EN_ (0x20000000) | ||
244 | |||
245 | #define GPT_CNT (0xD8) | ||
246 | |||
247 | #define BUS_CFG (0xDC) | ||
248 | #define BUS_CFG_RXTXWEIGHT_1_1 (0 << 25) | ||
249 | #define BUS_CFG_RXTXWEIGHT_2_1 (1 << 25) | ||
250 | #define BUS_CFG_RXTXWEIGHT_3_1 (2 << 25) | ||
251 | #define BUS_CFG_RXTXWEIGHT_4_1 (3 << 25) | ||
252 | |||
253 | #define PMT_CTRL (0xE0) | ||
254 | |||
255 | #define FREE_RUN (0xF4) | ||
256 | |||
257 | #define E2P_CMD (0xF8) | ||
258 | #define E2P_CMD_EPC_BUSY_ (0x80000000) | ||
259 | #define E2P_CMD_EPC_CMD_ (0x70000000) | ||
260 | #define E2P_CMD_EPC_CMD_READ_ (0x00000000) | ||
261 | #define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) | ||
262 | #define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) | ||
263 | #define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) | ||
264 | #define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) | ||
265 | #define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) | ||
266 | #define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) | ||
267 | #define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) | ||
268 | #define E2P_CMD_EPC_TIMEOUT_ (0x00000200) | ||
269 | #define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) | ||
270 | #define E2P_CMD_EPC_ADDR_ (0x000000FF) | ||
271 | |||
272 | #define E2P_DATA (0xFC) | ||
273 | #define E2P_DATA_EEPROM_DATA_ (0x000000FF) | ||
274 | |||
275 | #endif /* _SMSC9420_H */ | ||