Merge branch 'devel-stable' into devel

Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c

1300 files changed, 47979 insertions, 17932 deletions

diff --git a/CREDITS b/CREDITS
index 2b88fb37ad50..1a41bf4addd0 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
index 93cb28d05dcd..18f9651ff23d 100644
--- a/Documentation/RCU/rculist_nulls.txt
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
new file mode 100644
index 000000000000..76b3a11e90be
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -0,0 +1,75 @@
+                S3C24XX CPUfreq support
+                =======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index f688eba87704..6a5be5d5c8e4 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -1,7 +1,7 @@
 /*
  *      cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");
diff --git a/Documentation/connector/ucon.c b/Documentation/connector/ucon.c
index d738cde2a8d5..c5092ad0ce4b 100644
--- a/Documentation/connector/ucon.c
+++ b/Documentation/connector/ucon.c
@@ -1,7 +1,7 @@
 /*
  *      ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 82132169d47a..60120fb3b961 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7e81e37c0b1e..b245d524d568 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 9ebcd6ef361b..950cde6d6e58 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,9 @@
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
 #define _LARGEFILE64_SOURCE
 #define _GNU_SOURCE
 #include <stdio.h>
@@ -46,13 +48,15 @@
 #include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
  *
  * As Linus said, "C is a Spartan language, and so should your naming be."  I
  * like these abbreviations, so we define them here.  Note that u64 is always
  * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
 typedef unsigned long long u64;
 typedef uint32_t u32;
 typedef uint16_t u16;
@@ -69,8 +73,10 @@ typedef uint8_t u8;
 /* This will occupy 3 pages: it must be a power of 2. */
 #define VIRTQUEUE_NUM 256
 
-/*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro.  The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
 static bool verbose;
 #define verbose(args...) \
         do { if (verbose) printf(args); } while(0)
@@ -87,8 +93,7 @@ static int lguest_fd;
 static unsigned int __thread cpu_id;
 
 /* This is our list of devices. */
-struct device_list
-{
+struct device_list {
         /* Counter to assign interrupt numbers. */
         unsigned int next_irq;
 
@@ -100,8 +105,7 @@ struct device_list
 
         /* A single linked list of devices. */
         struct device *dev;
-        /* And a pointer to the last device for easy append and also for
-         * configuration appending. */
+        /* And a pointer to the last device for easy append. */
         struct device *lastdev;
 };
 
@@ -109,8 +113,7 @@ struct device_list
 static struct device_list devices;
 
 /* The device structure describes a single device. */
-struct device
-{
+struct device {
         /* The linked-list pointer. */
         struct device *next;
 
@@ -135,8 +138,7 @@ struct device
 };
 
 /* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
         struct virtqueue *next;
 
         /* Which device owns me. */
@@ -168,20 +170,24 @@ static char **main_args;
 /* The original tty settings to restore on exit. */
 static struct termios orig_term;
 
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
  * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
 #define wmb() __asm__ __volatile__("" : : : "memory")
 #define mb() __asm__ __volatile__("" : : : "memory")
 
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
  *
  * This is a fairly ugly trick: we need to know the size of the type and
  * alignment requirement to check the pointer is kosher.  It's also nice to
  * have the name of the type in case we report failure.
  *
  * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
 #define convert(iov, type) \
         ((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
 
@@ -198,8 +204,10 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 /* Wrapper for the last available index.  Makes it easier to change. */
 #define lg_last_avail(vq)       ((vq)->last_avail_idx)
 
-/* The virtio configuration space is defined to be little-endian.  x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian.  x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
 #define cpu_to_le16(v16) (v16)
 #define cpu_to_le32(v32) (v32)
 #define cpu_to_le64(v64) (v64)
@@ -241,11 +249,12 @@ static u8 *get_feature_bits(struct device *dev)
                 + dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free!  Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!).  Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section.  Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free!  Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section.  Or, maybe not.
  *
  * The Launcher sets up a big chunk of memory to be the Guest's "physical"
  * memory and stores it in "guest_base".  In other words, Guest physical ==
@@ -253,7 +262,8 @@ static u8 *get_feature_bits(struct device *dev)
  *
  * This can be tough to get your head around, but usually it just means that we
  * use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
 static void *from_guest_phys(unsigned long addr)
 {
         return guest_base + addr;
@@ -268,7 +278,8 @@ static unsigned long to_guest_phys(const void *addr)
  * Loading the Kernel.
  *
  * We start with couple of simple helper routines.  open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
 static int open_or_die(const char *name, int flags)
 {
         int fd = open(name, flags);
@@ -283,12 +294,19 @@ static void *map_zeroed_pages(unsigned int num)
         int fd = open_or_die("/dev/zero", O_RDONLY);
         void *addr;
 
-        /* We use a private mapping (ie. if we write to the page, it will be
-         * copied). */
+        /*
+         * We use a private mapping (ie. if we write to the page, it will be
+         * copied).
+         */
         addr = mmap(NULL, getpagesize() * num,
                     PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
         if (addr == MAP_FAILED)
                 err(1, "Mmaping %u pages of /dev/zero", num);
+
+        /*
+         * One neat mmap feature is that you can close the fd, and it
+         * stays mapped.
+         */
         close(fd);
 
         return addr;
@@ -305,20 +323,24 @@ static void *get_pages(unsigned int num)
         return addr;
 }
 
-/* This routine is used to load the kernel or initrd.  It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd.  It tries mmap, but if
  * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
 static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 {
         ssize_t r;
 
-        /* We map writable even though for some segments are marked read-only.
+        /*
+         * We map writable even though for some segments are marked read-only.
          * The kernel really wants to be writable: it patches its own
          * instructions.
          *
          * MAP_PRIVATE means that the page won't be copied until a write is
          * done to it.  This allows us to share untouched memory between
-         * Guests. */
+         * Guests.
+         */
         if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
                  MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
                 return;
@@ -329,7 +351,8 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
                 err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
 }
 
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
  * the Guest memory.  ELF = Embedded Linking Format, which is the format used
  * by all modern binaries on Linux including the kernel.
  *
@@ -337,23 +360,28 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
  * address.  We use the physical address; the Guest will map itself to the
  * virtual address.
  *
- * We return the starting address. */
+ * We return the starting address.
+ */
 static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 {
         Elf32_Phdr phdr[ehdr->e_phnum];
         unsigned int i;
 
-        /* Sanity checks on the main ELF header: an x86 executable with a
-         * reasonable number of correctly-sized program headers. */
+        /*
+         * Sanity checks on the main ELF header: an x86 executable with a
+         * reasonable number of correctly-sized program headers.
+         */
         if (ehdr->e_type != ET_EXEC
             || ehdr->e_machine != EM_386
             || ehdr->e_phentsize != sizeof(Elf32_Phdr)
             || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
                 errx(1, "Malformed elf header");
 
-        /* An ELF executable contains an ELF header and a number of "program"
+        /*
+         * An ELF executable contains an ELF header and a number of "program"
          * headers which indicate which parts ("segments") of the program to
-         * load where. */
+         * load where.
+         */
 
         /* We read in all the program headers at once: */
         if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
@@ -361,8 +389,10 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
         if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
                 err(1, "Reading program headers");
 
-        /* Try all the headers: there are usually only three.  A read-only one,
-         * a read-write one, and a "note" section which we don't load. */
+        /*
+         * Try all the headers: there are usually only three.  A read-only one,
+         * a read-write one, and a "note" section which we don't load.
+         */
         for (i = 0; i < ehdr->e_phnum; i++) {
                 /* If this isn't a loadable segment, we ignore it */
                 if (phdr[i].p_type != PT_LOAD)
@@ -380,13 +410,15 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
         return ehdr->e_entry;
 }
 
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded.  You're
- * supposed to jump into it and it will unpack itself.  We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
+ * to jump into it and it will unpack itself.  We used to have to perform some
+ * hairy magic because the unpacking code scared me.
  *
  * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
  * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
 static unsigned long load_bzimage(int fd)
 {
         struct boot_params boot;
@@ -394,8 +426,10 @@ static unsigned long load_bzimage(int fd)
         /* Modern bzImages get loaded at 1M. */
         void *p = from_guest_phys(0x100000);
 
-        /* Go back to the start of the file and read the header.  It should be
-         * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+        /*
+         * Go back to the start of the file and read the header.  It should be
+         * a Linux boot header (see Documentation/x86/i386/boot.txt)
+         */
         lseek(fd, 0, SEEK_SET);
         read(fd, &boot, sizeof(boot));
 
@@ -414,9 +448,11 @@ static unsigned long load_bzimage(int fd)
         return boot.hdr.code32_start;
 }
 
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
  * come wrapped up in the self-decompressing "bzImage" format.  With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
 static unsigned long load_kernel(int fd)
 {
         Elf32_Ehdr hdr;
@@ -433,24 +469,28 @@ static unsigned long load_kernel(int fd)
         return load_bzimage(fd);
 }
 
-/* This is a trivial little helper to align pages.  Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages.  Andi Kleen hated it because
  * it calls getpagesize() twice: "it's dumb code."
  *
  * Kernel guys get really het up about optimization, even when it's not
- * necessary.  I leave this code as a reaction against that. */
+ * necessary.  I leave this code as a reaction against that.
+ */
 static inline unsigned long page_align(unsigned long addr)
 {
         /* Add upwards and truncate downwards. */
         return ((addr + getpagesize()-1) & ~(getpagesize()-1));
 }
 
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers.  Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
  *
  * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels.  He sent me this (and tells me when I break it). */
+ * kernels.  He sent me this (and tells me when I break it).
+ */
 static unsigned long load_initrd(const char *name, unsigned long mem)
 {
         int ifd;
@@ -462,12 +502,16 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
         if (fstat(ifd, &st) < 0)
                 err(1, "fstat() on initrd '%s'", name);
 
-        /* We map the initrd at the top of memory, but mmap wants it to be
-         * page-aligned, so we round the size up for that. */
+        /*
+         * We map the initrd at the top of memory, but mmap wants it to be
+         * page-aligned, so we round the size up for that.
+         */
         len = page_align(st.st_size);
         map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
-        /* Once a file is mapped, you can close the file descriptor.  It's a
-         * little odd, but quite useful. */
+        /*
+         * Once a file is mapped, you can close the file descriptor.  It's a
+         * little odd, but quite useful.
+         */
         close(ifd);
         verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
 
@@ -476,8 +520,10 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 }
 /*:*/
 
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
 static void concat(char *dst, char *args[])
 {
         unsigned int i, len = 0;
@@ -494,10 +540,12 @@ static void concat(char *dst, char *args[])
         dst[len] = '\0';
 }
 
-/*L:185 This is where we actually tell the kernel to initialize the Guest.  We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest.  We
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
 static void tell_kernel(unsigned long start)
 {
         unsigned long args[] = { LHREQ_INITIALIZE,
@@ -511,7 +559,7 @@ static void tell_kernel(unsigned long start)
 }
 /*:*/
 
-/*
+/*L:200
  * Device Handling.
  *
  * When the Guest gives us a buffer, it sends an array of addresses and sizes.
@@ -522,20 +570,26 @@ static void tell_kernel(unsigned long start)
 static void *_check_pointer(unsigned long addr, unsigned int size,
                             unsigned int line)
 {
-        /* We have to separately check addr and addr+size, because size could
-         * be huge and addr + size might wrap around. */
+        /*
+         * We have to separately check addr and addr+size, because size could
+         * be huge and addr + size might wrap around.
+         */
         if (addr >= guest_limit || addr + size >= guest_limit)
                 errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
-        /* We return a pointer for the caller's convenience, now we know it's
-         * safe to use. */
+        /*
+         * We return a pointer for the caller's convenience, now we know it's
+         * safe to use.
+         */
         return from_guest_phys(addr);
 }
 /* A macro which transparently hands the line number to the real function. */
 #define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
 
-/* Each buffer in the virtqueues is actually a chain of descriptors.  This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
 static unsigned next_desc(struct vring_desc *desc,
                           unsigned int i, unsigned int max)
 {
@@ -556,7 +610,10 @@ static unsigned next_desc(struct vring_desc *desc,
         return next;
 }
 
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
 static void trigger_irq(struct virtqueue *vq)
 {
         unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
@@ -576,12 +633,14 @@ static void trigger_irq(struct virtqueue *vq)
                 err(1, "Triggering irq %i", vq->config.irq);
 }
 
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
 static unsigned wait_for_vq_desc(struct virtqueue *vq,
                                  struct iovec iov[],
                                  unsigned int *out_num, unsigned int *in_num)
@@ -590,17 +649,23 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
         struct vring_desc *desc;
         u16 last_avail = lg_last_avail(vq);
 
+        /* There's nothing available? */
         while (last_avail == vq->vring.avail->idx) {
                 u64 event;
 
-                /* OK, tell Guest about progress up to now. */
+                /*
+                 * Since we're about to sleep, now is a good time to tell the
+                 * Guest about what we've used up to now.
+                 */
                 trigger_irq(vq);
 
                 /* OK, now we need to know about added descriptors. */
                 vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
 
-                /* They could have slipped one in as we were doing that: make
-                 * sure it's written, then check again. */
+                /*
+                 * They could have slipped one in as we were doing that: make
+                 * sure it's written, then check again.
+                 */
                 mb();
                 if (last_avail != vq->vring.avail->idx) {
                         vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
@@ -620,8 +685,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
                 errx(1, "Guest moved used index from %u to %u",
                      last_avail, vq->vring.avail->idx);
 
-        /* Grab the next descriptor number they're advertising, and increment
-         * the index we've seen. */
+        /*
+         * Grab the next descriptor number they're advertising, and increment
+         * the index we've seen.
+         */
         head = vq->vring.avail->ring[last_avail % vq->vring.num];
         lg_last_avail(vq)++;
 
@@ -636,8 +703,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
         desc = vq->vring.desc;
         i = head;
 
-        /* If this is an indirect entry, then this buffer contains a descriptor
-         * table which we handle as if it's any normal descriptor chain. */
+        /*
+         * If this is an indirect entry, then this buffer contains a descriptor
+         * table which we handle as if it's any normal descriptor chain.
+         */
         if (desc[i].flags & VRING_DESC_F_INDIRECT) {
                 if (desc[i].len % sizeof(struct vring_desc))
                         errx(1, "Invalid size for indirect buffer table");
@@ -656,8 +725,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
                 if (desc[i].flags & VRING_DESC_F_WRITE)
                         (*in_num)++;
                 else {
-                        /* If it's an output descriptor, they're all supposed
-                         * to come before any input descriptors. */
+                        /*
+                         * If it's an output descriptor, they're all supposed
+                         * to come before any input descriptors.
+                         */
                         if (*in_num)
                                 errx(1, "Descriptor has out after in");
                         (*out_num)++;
@@ -671,14 +742,19 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
         return head;
 }
 
-/* After we've used one of their buffers, we tell them about it.  We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it.  Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
 static void add_used(struct virtqueue *vq, unsigned int head, int len)
 {
         struct vring_used_elem *used;
 
-        /* The virtqueue contains a ring of used buffers.  Get a pointer to the
-         * next entry in that used ring. */
+        /*
+         * The virtqueue contains a ring of used buffers.  Get a pointer to the
+         * next entry in that used ring.
+         */
         used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
         used->id = head;
         used->len = len;
@@ -698,9 +774,9 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 /*
  * The Console
  *
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
         /* How many times have they hit ^C? */
         int count;
         /* When did they start? */
@@ -715,30 +791,35 @@ static void console_input(struct virtqueue *vq)
         struct console_abort *abort = vq->dev->priv;
         struct iovec iov[vq->vring.num];
 
-        /* Make sure there's a descriptor waiting. */
+        /* Make sure there's a descriptor available. */
         head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
         if (out_num)
                 errx(1, "Output buffers in console in queue?");
 
-        /* Read it in. */
+        /* Read into it.  This is where we usually wait. */
         len = readv(STDIN_FILENO, iov, in_num);
         if (len <= 0) {
                 /* Ran out of input? */
                 warnx("Failed to get console input, ignoring console.");
-                /* For simplicity, dying threads kill the whole Launcher.  So
-                 * just nap here. */
+                /*
+                 * For simplicity, dying threads kill the whole Launcher.  So
+                 * just nap here.
+                 */
                 for (;;)
                         pause();
         }
 
+        /* Tell the Guest we used a buffer. */
         add_used_and_trigger(vq, head, len);
 
-        /* Three ^C within one second?  Exit.
+        /*
+         * Three ^C within one second?  Exit.
          *
          * This is such a hack, but works surprisingly well.  Each ^C has to
          * be in a buffer by itself, so they can't be too fast.  But we check
          * that we get three within about a second, so they can't be too
-         * slow. */
+         * slow.
+         */
         if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
                 abort->count = 0;
                 return;
@@ -763,15 +844,23 @@ static void console_output(struct virtqueue *vq)
         unsigned int head, out, in;
         struct iovec iov[vq->vring.num];
 
+        /* We usually wait in here, for the Guest to give us something. */
         head = wait_for_vq_desc(vq, iov, &out, &in);
         if (in)
                 errx(1, "Input buffers in console output queue?");
+
+        /* writev can return a partial write, so we loop here. */
         while (!iov_empty(iov, out)) {
                 int len = writev(STDOUT_FILENO, iov, out);
                 if (len <= 0)
                         err(1, "Write to stdout gave %i", len);
                 iov_consume(iov, out, len);
         }
+
+        /*
+         * We're finished with that buffer: if we're going to sleep,
+         * wait_for_vq_desc() will prod the Guest with an interrupt.
+         */
         add_used(vq, head, 0);
 }
 
@@ -791,15 +880,30 @@ static void net_output(struct virtqueue *vq)
         unsigned int head, out, in;
         struct iovec iov[vq->vring.num];
 
+        /* We usually wait in here for the Guest to give us a packet. */
         head = wait_for_vq_desc(vq, iov, &out, &in);
         if (in)
                 errx(1, "Input buffers in net output queue?");
+        /*
+         * Send the whole thing through to /dev/net/tun.  It expects the exact
+         * same format: what a coincidence!
+         */
         if (writev(net_info->tunfd, iov, out) < 0)
                 errx(1, "Write to tun failed?");
+
+        /*
+         * Done with that one; wait_for_vq_desc() will send the interrupt if
+         * all packets are processed.
+         */
         add_used(vq, head, 0);
 }
 
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
 static bool will_block(int fd)
 {
         fd_set fdset;
@@ -809,8 +913,11 @@ static bool will_block(int fd)
         return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest.  Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
 static void net_input(struct virtqueue *vq)
 {
         int len;
@@ -818,21 +925,38 @@ static void net_input(struct virtqueue *vq)
         struct iovec iov[vq->vring.num];
         struct net_info *net_info = vq->dev->priv;
 
+        /*
+         * Get a descriptor to write an incoming packet into.  This will also
+         * send an interrupt if they're out of descriptors.
+         */
         head = wait_for_vq_desc(vq, iov, &out, &in);
         if (out)
                 errx(1, "Output buffers in net input queue?");
 
-        /* Deliver interrupt now, since we're about to sleep. */
+        /*
+         * If it looks like we'll block reading from the tun device, send them
+         * an interrupt.
+         */
         if (vq->pending_used && will_block(net_info->tunfd))
                 trigger_irq(vq);
 
+        /*
+         * Read in the packet.  This is where we normally wait (when there's no
+         * incoming network traffic).
+         */
         len = readv(net_info->tunfd, iov, in);
         if (len <= 0)
                 err(1, "Failed to read from tun.");
+
+        /*
+         * Mark that packet buffer as used, but don't interrupt here.  We want
+         * to wait until we've done as much work as we can.
+         */
         add_used(vq, head, len);
 }
+/*:*/
 
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
 static int do_thread(void *_vq)
 {
         struct virtqueue *vq = _vq;
@@ -842,8 +966,10 @@ static int do_thread(void *_vq)
         return 0;
 }
 
-/* When a child dies, we kill our entire process group with SIGTERM.  This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us!
+ */
 static void kill_launcher(int signal)
 {
         kill(0, SIGTERM);
@@ -878,11 +1004,15 @@ static void reset_device(struct device *dev)
         signal(SIGCHLD, (void *)kill_launcher);
 }
 
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
 static void create_thread(struct virtqueue *vq)
 {
-        /* Create stack for thread and run it.  Since stack grows
-         * upwards, we point the stack pointer to the end of this
-         * region. */
+        /*
+         * Create stack for thread.  Since the stack grows upwards, we point
+         * the stack pointer to the end of this region.
+         */
         char *stack = malloc(32768);
         unsigned long args[] = { LHREQ_EVENTFD,
                                  vq->config.pfn*getpagesize(), 0 };
@@ -893,17 +1023,22 @@ static void create_thread(struct virtqueue *vq)
                 err(1, "Creating eventfd");
         args[2] = vq->eventfd;
 
-        /* Attach an eventfd to this virtqueue: it will go off
-         * when the Guest does an LHCALL_NOTIFY for this vq. */
+        /*
+         * Attach an eventfd to this virtqueue: it will go off when the Guest
+         * does an LHCALL_NOTIFY for this vq.
+         */
         if (write(lguest_fd, &args, sizeof(args)) != 0)
                 err(1, "Attaching eventfd");
 
-        /* CLONE_VM: because it has to access the Guest memory, and
-         * SIGCHLD so we get a signal if it dies. */
+        /*
+         * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+         * we get a signal if it dies.
+         */
         vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
         if (vq->thread == (pid_t)-1)
                 err(1, "Creating clone");
-        /* We close our local copy, now the child has it. */
+
+        /* We close our local copy now the child has it. */
         close(vq->eventfd);
 }
 
@@ -955,7 +1090,10 @@ static void update_device_status(struct device *dev)
         }
 }
 
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.  In
+ * particular, it's used to notify us of device status changes during boot.
+ */
 static void handle_output(unsigned long addr)
 {
         struct device *i;
@@ -964,25 +1102,42 @@ static void handle_output(unsigned long addr)
         for (i = devices.dev; i; i = i->next) {
                 struct virtqueue *vq;
 
-                /* Notifications to device descriptors update device status. */
+                /*
+                 * Notifications to device descriptors mean they updated the
+                 * device status.
+                 */
                 if (from_guest_phys(addr) == i->desc) {
                         update_device_status(i);
                         return;
                 }
 
-                /* Devices *can* be used before status is set to DRIVER_OK. */
+                /*
+                 * Devices *can* be used before status is set to DRIVER_OK.
+                 * The original plan was that they would never do this: they
+                 * would always finish setting up their status bits before
+                 * actually touching the virtqueues.  In practice, we allowed
+                 * them to, and they do (eg. the disk probes for partition
+                 * tables as part of initialization).
+                 *
+                 * If we see this, we start the device: once it's running, we
+                 * expect the device to catch all the notifications.
+                 */
                 for (vq = i->vq; vq; vq = vq->next) {
                         if (addr != vq->config.pfn*getpagesize())
                                 continue;
                         if (i->running)
                                 errx(1, "Notification on running %s", i->name);
+                        /* This just calls create_thread() for each virtqueue */
                         start_device(i);
                         return;
                 }
         }
 
-        /* Early console write is done using notify on a nul-terminated string
-         * in Guest memory. */
+        /*
+         * Early console write is done using notify on a nul-terminated string
+         * in Guest memory.  It's also great for hacking debugging messages
+         * into a Guest.
+         */
         if (addr >= guest_limit)
                 errx(1, "Bad NOTIFY %#lx", addr);
 
@@ -998,10 +1153,12 @@ static void handle_output(unsigned long addr)
  * routines to allocate and manage them.
  */
 
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
  * number of virtqueue descriptors, then two sets of feature bits, then an
  * array of configuration bytes.  This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
 static u8 *device_config(const struct device *dev)
 {
         return (void *)(dev->desc + 1)
@@ -1009,9 +1166,11 @@ static u8 *device_config(const struct device *dev)
                 + dev->feature_len * 2;
 }
 
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
  * table page just above the Guest's normal memory.  It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
 static struct lguest_device_desc *new_dev_desc(u16 type)
 {
         struct lguest_device_desc d = { .type = type };
@@ -1032,8 +1191,10 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
         return memcpy(p, &d, sizeof(d));
 }
 
-/* Each device descriptor is followed by the description of its virtqueues.  We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues.  We
+ * specify how many descriptors the virtqueue is to have.
+ */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
                           void (*service)(struct virtqueue *))
 {
@@ -1050,6 +1211,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
         vq->next = NULL;
         vq->last_avail_idx = 0;
         vq->dev = dev;
+
+        /*
+         * This is the routine the service thread will run, and its Process ID
+         * once it's running.
+         */
         vq->service = service;
         vq->thread = (pid_t)-1;
 
@@ -1061,10 +1227,12 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
         /* Initialize the vring. */
         vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
 
-        /* Append virtqueue to this device's descriptor.  We use
+        /*
+         * Append virtqueue to this device's descriptor.  We use
          * device_config() to get the end of the device's current virtqueues;
          * we check that we haven't added any config or feature information
-         * yet, otherwise we'd be overwriting them. */
+         * yet, otherwise we'd be overwriting them.
+         */
         assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
         memcpy(device_config(dev), &vq->config, sizeof(vq->config));
         dev->num_vq++;
@@ -1072,14 +1240,18 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 
         verbose("Virtqueue page %#lx\n", to_guest_phys(p));
 
-        /* Add to tail of list, so dev->vq is first vq, dev->vq->next is
-         * second.  */
+        /*
+         * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+         * second.
+         */
         for (i = &dev->vq; *i; i = &(*i)->next);
         *i = vq;
 }
 
-/* The first half of the feature bitmask is for us to advertise features.  The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features.  The
+ * second half is for the Guest to accept features.
+ */
 static void add_feature(struct device *dev, unsigned bit)
 {
         u8 *features = get_feature_bits(dev);
@@ -1093,9 +1265,11 @@ static void add_feature(struct device *dev, unsigned bit)
         features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
 }
 
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
  * descriptor.  It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
 static void set_config(struct device *dev, unsigned len, const void *conf)
 {
         /* Check we haven't overflowed our single page. */
@@ -1105,12 +1279,18 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
         /* Copy in the config information, and store the length. */
         memcpy(device_config(dev), conf, len);
         dev->desc->config_len = len;
+
+        /* Size must fit in config_len field (8 bits)! */
+        assert(dev->desc->config_len == len);
 }
 
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory.  We
+ * don't actually start the service threads until later.
  *
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
 static struct device *new_device(const char *name, u16 type)
 {
         struct device *dev = malloc(sizeof(*dev));
@@ -1123,10 +1303,12 @@ static struct device *new_device(const char *name, u16 type)
         dev->num_vq = 0;
         dev->running = false;
 
-        /* Append to device list.  Prepending to a single-linked list is
+        /*
+         * Append to device list.  Prepending to a single-linked list is
          * easier, but the user expects the devices to be arranged on the bus
          * in command-line order.  The first network device on the command line
-         * is eth0, the first block device /dev/vda, etc. */
+         * is eth0, the first block device /dev/vda, etc.
+         */
         if (devices.lastdev)
                 devices.lastdev->next = dev;
         else
@@ -1136,8 +1318,10 @@ static struct device *new_device(const char *name, u16 type)
         return dev;
 }
 
-/* Our first setup routine is the console.  It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console.  It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
 static void setup_console(void)
 {
         struct device *dev;
@@ -1145,8 +1329,10 @@ static void setup_console(void)
         /* If we can save the initial standard input settings... */
         if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
                 struct termios term = orig_term;
-                /* Then we turn off echo, line buffering and ^C etc.  We want a
-                 * raw input stream to the Guest. */
+                /*
+                 * Then we turn off echo, line buffering and ^C etc: We want a
+                 * raw input stream to the Guest.
+                 */
                 term.c_lflag &= ~(ISIG|ICANON|ECHO);
                 tcsetattr(STDIN_FILENO, TCSANOW, &term);
         }
@@ -1157,10 +1343,12 @@ static void setup_console(void)
         dev->priv = malloc(sizeof(struct console_abort));
         ((struct console_abort *)dev->priv)->count = 0;
 
-        /* The console needs two virtqueues: the input then the output.  When
+        /*
+         * The console needs two virtqueues: the input then the output.  When
          * they put something the input queue, we make sure we're listening to
          * stdin.  When they put something in the output queue, we write it to
-         * stdout. */
+         * stdout.
+         */
         add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
         add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
@@ -1168,7 +1356,8 @@ static void setup_console(void)
 }
 /*:*/
 
-/*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
  *
@@ -1182,7 +1371,8 @@ static void setup_console(void)
  * multiple inter-guest channels behind one interface, although it would
  * require some manner of hotplugging new virtio channels.
  *
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
 
 static u32 str2ip(const char *ipaddr)
 {
@@ -1207,11 +1397,13 @@ static void str2mac(const char *macaddr, unsigned char mac[6])
         mac[5] = m[5];
 }
 
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
  * network device to the bridge device specified by the command line.
  *
  * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
 static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 {
         int ifidx;
@@ -1231,9 +1423,11 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
                 err(1, "can't add %s to bridge %s", if_name, br_name);
 }
 
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
         struct ifreq ifr;
@@ -1260,10 +1454,12 @@ static int get_tun_device(char tapif[IFNAMSIZ])
         /* Start with this zeroed.  Messy but sure. */
         memset(&ifr, 0, sizeof(ifr));
 
-        /* We open the /dev/net/tun device and tell it we want a tap device.  A
+        /*
+         * We open the /dev/net/tun device and tell it we want a tap device.  A
          * tap device is like a tun device, only somehow different.  To tell
          * the truth, I completely blundered my way through this code, but it
-         * works now! */
+         * works now!
+         */
         netfd = open_or_die("/dev/net/tun", O_RDWR);
         ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
         strcpy(ifr.ifr_name, "tap%d");
@@ -1274,18 +1470,22 @@ static int get_tun_device(char tapif[IFNAMSIZ])
                   TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
                 err(1, "Could not set features for tun device");
 
-        /* We don't need checksums calculated for packets coming in this
-         * device: trust us! */
+        /*
+         * We don't need checksums calculated for packets coming in this
+         * device: trust us!
+         */
         ioctl(netfd, TUNSETNOCSUM, 1);
 
         memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
         return netfd;
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network.  This can either use bridging or
  * routing, but the principle is the same: it uses the "tun" device to inject
  * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
 static void setup_tun_net(char *arg)
 {
         struct device *dev;
@@ -1302,13 +1502,14 @@ static void setup_tun_net(char *arg)
         dev = new_device("net", VIRTIO_ID_NET);
         dev->priv = net_info;
 
-        /* Network devices need a receive and a send queue, just like
-         * console. */
+        /* Network devices need a recv and a send queue, just like console. */
         add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
         add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
-        /* We need a socket to perform the magic network ioctls to bring up the
-         * tap interface, connect to the bridge etc.  Any socket will do! */
+        /*
+         * We need a socket to perform the magic network ioctls to bring up the
+         * tap interface, connect to the bridge etc.  Any socket will do!
+         */
         ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
         if (ipfd < 0)
                 err(1, "opening IP socket");
@@ -1362,39 +1563,31 @@ static void setup_tun_net(char *arg)
                 verbose("device %u: tun %s: %s\n",
                         devices.device_num, tapif, arg);
 }
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file.  Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
 
 /* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
         /* The size of the file. */
         off64_t len;
 
         /* The file descriptor for the file. */
         int fd;
 
-        /* IO thread listens on this file descriptor [0]. */
-        int workpipe[2];
-
-        /* IO thread writes to this file descriptor to mark it done, then
-         * Launcher triggers interrupt to Guest. */
-        int done_fd;
 };
 
 /*L:210
  * The Disk
  *
- * Remember that the block device is handled by a separate I/O thread.  We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread.  It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
  */
 static void blk_request(struct virtqueue *vq)
 {
@@ -1406,47 +1599,64 @@ static void blk_request(struct virtqueue *vq)
         struct iovec iov[vq->vring.num];
         off64_t off;
 
-        /* Get the next request. */
+        /*
+         * Get the next request, where we normally wait.  It triggers the
+         * interrupt to acknowledge previously serviced requests (if any).
+         */
         head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
-        /* Every block request should contain at least one output buffer
+        /*
+         * Every block request should contain at least one output buffer
          * (detailing the location on disk and the type of request) and one
-         * input buffer (to hold the result). */
+         * input buffer (to hold the result).
+         */
         if (out_num == 0 || in_num == 0)
                 errx(1, "Bad virtblk cmd %u out=%u in=%u",
                      head, out_num, in_num);
 
         out = convert(&iov[0], struct virtio_blk_outhdr);
         in = convert(&iov[out_num+in_num-1], u8);
+        /*
+         * For historical reasons, block operations are expressed in 512 byte
+         * "sectors".
+         */
         off = out->sector * 512;
 
-        /* The block device implements "barriers", where the Guest indicates
+        /*
+         * The block device implements "barriers", where the Guest indicates
          * that it wants all previous writes to occur before this write.  We
          * don't have a way of asking our kernel to do a barrier, so we just
-         * synchronize all the data in the file.  Pretty poor, no? */
+         * synchronize all the data in the file.  Pretty poor, no?
+         */
         if (out->type & VIRTIO_BLK_T_BARRIER)
                 fdatasync(vblk->fd);
 
-        /* In general the virtio block driver is allowed to try SCSI commands.
-         * It'd be nice if we supported eject, for example, but we don't. */
+        /*
+         * In general the virtio block driver is allowed to try SCSI commands.
+         * It'd be nice if we supported eject, for example, but we don't.
+         */
         if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
                 fprintf(stderr, "Scsi commands unsupported\n");
                 *in = VIRTIO_BLK_S_UNSUPP;
                 wlen = sizeof(*in);
         } else if (out->type & VIRTIO_BLK_T_OUT) {
-                /* Write */
-
-                /* Move to the right location in the block file.  This can fail
-                 * if they try to write past end. */
+                /*
+                 * Write
+                 *
+                 * Move to the right location in the block file.  This can fail
+                 * if they try to write past end.
+                 */
                 if (lseek64(vblk->fd, off, SEEK_SET) != off)
                         err(1, "Bad seek to sector %llu", out->sector);
 
                 ret = writev(vblk->fd, iov+1, out_num-1);
                 verbose("WRITE to sector %llu: %i\n", out->sector, ret);
 
-                /* Grr... Now we know how long the descriptor they sent was, we
+                /*
+                 * Grr... Now we know how long the descriptor they sent was, we
                  * make sure they didn't try to write over the end of the block
-                 * file (possibly extending it). */
+                 * file (possibly extending it).
+                 */
                 if (ret > 0 && off + ret > vblk->len) {
                         /* Trim it back to the correct length */
                         ftruncate64(vblk->fd, vblk->len);
@@ -1456,10 +1666,12 @@ static void blk_request(struct virtqueue *vq)
                 wlen = sizeof(*in);
                 *in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
         } else {
-                /* Read */
-
-                /* Move to the right location in the block file.  This can fail
-                 * if they try to read past end. */
+                /*
+                 * Read
+                 *
+                 * Move to the right location in the block file.  This can fail
+                 * if they try to read past end.
+                 */
                 if (lseek64(vblk->fd, off, SEEK_SET) != off)
                         err(1, "Bad seek to sector %llu", out->sector);
 
@@ -1474,13 +1686,16 @@ static void blk_request(struct virtqueue *vq)
                 }
         }
 
-        /* OK, so we noted that it was pretty poor to use an fdatasync as a
+        /*
+         * OK, so we noted that it was pretty poor to use an fdatasync as a
          * barrier.  But Christoph Hellwig points out that we need a sync
          * *afterwards* as well: "Barriers specify no reordering to the front
-         * or the back."  And Jens Axboe confirmed it, so here we are: */
+         * or the back."  And Jens Axboe confirmed it, so here we are:
+         */
         if (out->type & VIRTIO_BLK_T_BARRIER)
                 fdatasync(vblk->fd);
 
+        /* Finished that request. */
         add_used(vq, head, wlen);
 }
 
@@ -1491,7 +1706,7 @@ static void setup_block_file(const char *filename)
         struct vblk_info *vblk;
         struct virtio_blk_config conf;
 
-        /* The device responds to return from I/O thread. */
+        /* Creat the device. */
         dev = new_device("block", VIRTIO_ID_BLOCK);
 
         /* The device has one virtqueue, where the Guest places requests. */
@@ -1510,27 +1725,32 @@ static void setup_block_file(const char *filename)
         /* Tell Guest how many sectors this device has. */
         conf.capacity = cpu_to_le64(vblk->len / 512);
 
-        /* Tell Guest not to put in too many descriptors at once: two are used
-         * for the in and out elements. */
+        /*
+         * Tell Guest not to put in too many descriptors at once: two are used
+         * for the in and out elements.
+         */
         add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
         conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
 
-        set_config(dev, sizeof(conf), &conf);
+        /* Don't try to put whole struct: we have 8 bit limit. */
+        set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
 
         verbose("device %u: virtblock %llu sectors\n",
                 ++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
-struct rng_info {
-        int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+        int rfd;
+};
+
 static void rng_input(struct virtqueue *vq)
 {
         int len;
@@ -1543,9 +1763,10 @@ static void rng_input(struct virtqueue *vq)
         if (out_num)
                 errx(1, "Output buffers in rng?");
 
-        /* This is why we convert to iovecs: the readv() call uses them, and so
-         * it reads straight into the Guest's buffer.  We loop to make sure we
-         * fill it. */
+        /*
+         * Just like the console write, we loop to cover the whole iovec.
+         * In this case, short reads actually happen quite a bit.
+         */
         while (!iov_empty(iov, in_num)) {
                 len = readv(rng_info->rfd, iov, in_num);
                 if (len <= 0)
@@ -1558,15 +1779,18 @@ static void rng_input(struct virtqueue *vq)
         add_used(vq, head, totlen);
 }
 
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
 static void setup_rng(void)
 {
         struct device *dev;
         struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
+        /* Our device's privat info simply contains the /dev/random fd. */
         rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
-        /* The device responds to return from I/O thread. */
+        /* Create the new device. */
         dev = new_device("rng", VIRTIO_ID_RNG);
         dev->priv = rng_info;
 
@@ -1582,8 +1806,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
         unsigned int i;
 
-        /* Since we don't track all open fds, we simply close everything beyond
-         * stderr. */
+        /*
+         * Since we don't track all open fds, we simply close everything beyond
+         * stderr.
+         */
         for (i = 3; i < FD_SETSIZE; i++)
                 close(i);
 
@@ -1594,8 +1820,10 @@ static void __attribute__((noreturn)) restart_guest(void)
         err(1, "Could not exec %s", main_args[0]);
 }
 
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
 static void __attribute__((noreturn)) run_guest(void)
 {
         for (;;) {
@@ -1630,7 +1858,7 @@ static void __attribute__((noreturn)) run_guest(void)
  *
  * Are you ready?  Take a deep breath and join me in the core of the Host, in
  * "make Host".
- :*/
+:*/
 
 static struct option opts[] = {
         { "verbose", 0, NULL, 'v' },
@@ -1651,8 +1879,7 @@ static void usage(void)
 /*L:105 The main routine is where the real work begins: */
 int main(int argc, char *argv[])
 {
-        /* Memory, top-level pagetable, code startpoint and size of the
-         * (optional) initrd. */
+        /* Memory, code startpoint and size of the (optional) initrd. */
         unsigned long mem = 0, start, initrd_size = 0;
         /* Two temporaries. */
         int i, c;
@@ -1664,24 +1891,32 @@ int main(int argc, char *argv[])
         /* Save the args: we "reboot" by execing ourselves again. */
         main_args = argv;
 
-        /* First we initialize the device list.  We keep a pointer to the last
+        /*
+         * First we initialize the device list.  We keep a pointer to the last
          * device, and the next interrupt number to use for devices (1:
-         * remember that 0 is used by the timer). */
+         * remember that 0 is used by the timer).
+         */
         devices.lastdev = NULL;
         devices.next_irq = 1;
 
+        /* We're CPU 0.  In fact, that's the only CPU possible right now. */
         cpu_id = 0;
-        /* We need to know how much memory so we can set up the device
+
+        /*
+         * We need to know how much memory so we can set up the device
          * descriptor and memory pages for the devices as we parse the command
          * line.  So we quickly look through the arguments to find the amount
-         * of memory now. */
+         * of memory now.
+         */
         for (i = 1; i < argc; i++) {
                 if (argv[i][0] != '-') {
                         mem = atoi(argv[i]) * 1024 * 1024;
-                        /* We start by mapping anonymous pages over all of
+                        /*
+                         * We start by mapping anonymous pages over all of
                          * guest-physical memory range.  This fills it with 0,
                          * and ensures that the Guest won't be killed when it
-                         * tries to access it. */
+                         * tries to access it.
+                         */
                         guest_base = map_zeroed_pages(mem / getpagesize()
                                                       + DEVICE_PAGES);
                         guest_limit = mem;
@@ -1714,8 +1949,10 @@ int main(int argc, char *argv[])
                         usage();
                 }
         }
-        /* After the other arguments we expect memory and kernel image name,
-         * followed by command line arguments for the kernel. */
+        /*
+         * After the other arguments we expect memory and kernel image name,
+         * followed by command line arguments for the kernel.
+         */
         if (optind + 2 > argc)
                 usage();
 
@@ -1733,20 +1970,26 @@ int main(int argc, char *argv[])
         /* Map the initrd image if requested (at top of physical memory) */
         if (initrd_name) {
                 initrd_size = load_initrd(initrd_name, mem);
-                /* These are the location in the Linux boot header where the
-                 * start and size of the initrd are expected to be found. */
+                /*
+                 * These are the location in the Linux boot header where the
+                 * start and size of the initrd are expected to be found.
+                 */
                 boot->hdr.ramdisk_image = mem - initrd_size;
                 boot->hdr.ramdisk_size = initrd_size;
                 /* The bootloader type 0xFF means "unknown"; that's OK. */
                 boot->hdr.type_of_loader = 0xFF;
         }
 
-        /* The Linux boot header contains an "E820" memory map: ours is a
-         * simple, single region. */
+        /*
+         * The Linux boot header contains an "E820" memory map: ours is a
+         * simple, single region.
+         */
         boot->e820_entries = 1;
         boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
-        /* The boot header contains a command line pointer: we put the command
-         * line after the boot header. */
+        /*
+         * The boot header contains a command line pointer: we put the command
+         * line after the boot header.
+         */
         boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
         /* We use a simple helper to copy the arguments separated by spaces. */
         concat((char *)(boot + 1), argv+optind+2);
@@ -1760,11 +2003,13 @@ int main(int argc, char *argv[])
         /* Tell the entry path not to try to reload segment registers. */
         boot->hdr.loadflags |= KEEP_SEGMENTS;
 
-        /* We tell the kernel to initialize the Guest: this returns the open
-         * /dev/lguest file descriptor. */
+        /*
+         * We tell the kernel to initialize the Guest: this returns the open
+         * /dev/lguest file descriptor.
+         */
         tell_kernel(start);
 
-        /* Ensure that we terminate if a child dies. */
+        /* Ensure that we terminate if a device-servicing child dies. */
         signal(SIGCHLD, kill_launcher);
 
         /* If we exit via err(), this kills all the threads, restores tty. */
diff --git a/Documentation/networking/6pack.txt b/Documentation/networking/6pack.txt
index d0777a1200e1..8f339428fdf4 100644
--- a/Documentation/networking/6pack.txt
+++ b/Documentation/networking/6pack.txt
@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 1df7f9cdab05..86eabe6c3419 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 381908d8ca42..719a819f8cc2 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
           bit 0 = Enable XRUN/jiffies debug messages
           bit 1 = Show stack trace at XRUN / jiffies check
           bit 2 = Enable additional jiffies check
+          bit 3 = Log hwptr update at each period interrupt
+          bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
         When the bit 0 is set, the driver will show the messages to
         kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
         buggy) hardware that doesn't give smooth pointer updates.
         This feature is enabled via the bit 2.
 
+        Bits 3 and 4 are for logging the hwptr records.  Note that
+        these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
         The general information of this PCM sub-stream.
 
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index cf42b820ff9d..d56a01775423 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'     - Will perform a kexec reboot in order to take a crashdump.
+'c'     - Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'     - Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 014d255231fc..68c236c01846 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 2bcf78896e22..573f95b58807 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx           0458:700c       Genius VideoCam V3
 zc3xx           0458:700f       Genius VideoCam Web V2
 sonixj          0458:7025       Genius Eye 311Q
+sn9c20x         0458:7029       Genius Look 320s
 sonixj          0458:702e       Genius Slim 310 NB
+sn9c20x         045e:00f4       LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj          045e:00f5       MicroSoft VX3000
 sonixj          045e:00f7       MicroSoft VX1000
 ov519           045e:028c       Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj          0c45:613b       Surfer SN-206
 sonixj          0c45:613c       Sonix Pccam168
 sonixj          0c45:6143       Sonix Pccam168
+sn9c20x         0c45:6240       PC Camera (SN9C201 + MT9M001)
+sn9c20x         0c45:6242       PC Camera (SN9C201 + MT9M111)
+sn9c20x         0c45:6248       PC Camera (SN9C201 + OV9655)
+sn9c20x         0c45:624e       PC Camera (SN9C201 + SOI968)
+sn9c20x         0c45:624f       PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6251       PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6253       PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6260       PC Camera (SN9C201 + OV7670)
+sn9c20x         0c45:6270       PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x         0c45:627b       PC Camera (SN9C201 + OV7660)
+sn9c20x         0c45:627c       PC Camera (SN9C201 + HV7131R)
+sn9c20x         0c45:627f       PC Camera (SN9C201 + OV9650)
+sn9c20x         0c45:6280       PC Camera (SN9C202 + MT9M001)
+sn9c20x         0c45:6282       PC Camera (SN9C202 + MT9M111)
+sn9c20x         0c45:6288       PC Camera (SN9C202 + OV9655)
+sn9c20x         0c45:628e       PC Camera (SN9C202 + SOI968)
+sn9c20x         0c45:628f       PC Camera (SN9C202 + OV9650)
+sn9c20x         0c45:62a0       PC Camera (SN9C202 + OV7670)
+sn9c20x         0c45:62b0       PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x         0c45:62b3       PC Camera (SN9C202 + OV9655)
+sn9c20x         0c45:62bb       PC Camera (SN9C202 + OV7660)
+sn9c20x         0c45:62bc       PC Camera (SN9C202 + HV7131R)
 sunplus         0d64:0303       Sunplus FashionCam DXG
 etoms           102c:6151       Qcam Sangha CIF
 etoms           102c:6251       Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx           10fd:8050       Typhoon Webshot II USB 300k
 ov534           1415:2000       Sony HD Eye for PS3 (SLEH 00201)
 pac207          145f:013a       Trust WB-1300N
+sn9c20x         145f:013d       Trust WB-3600R
 vc032x          15b8:6001       HP 2.0 Megapixel
 vc032x          15b8:6002       HP 2.0 Megapixel rz406aa
 spca501         1776:501c       Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508         8086:0110       Intel Easy PC Camera
 spca500         8086:0630       Intel Pocket PC Camera
 spca506         99fa:8988       Grandtec V.cap
+sn9c20x         a168:0610       Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0611       Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0613       Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0618       Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x         a168:0614       Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x         a168:0615       Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x         a168:0617       Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561         abcd:cdee       Petcam
diff --git a/MAINTAINERS b/MAINTAINERS
index 7b91c6e69d55..ed6a10349b14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,8 +73,8 @@ Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
 T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
@@ -104,88 +104,74 @@ X: Files and directories that are NOT maintained, same rules as F:
    matches all files in and below net excluding net/ipv6/
 
 3C505 NETWORK DRIVER
-P:      Philip Blundell
-M:      philb@gnu.org
+M:      Philip Blundell <philb@gnu.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/3c505*
 
 3C59X NETWORK DRIVER
-P:      Steffen Klassert
-M:      klassert@mathematik.tu-chemnitz.de
+M:      Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      Documentation/networking/vortex.txt
 F:      drivers/net/3c59x.c
 
 3CR990 NETWORK DRIVER
-P:      David Dillow
-M:      dave@thedillows.org
+M:      David Dillow <dave@thedillows.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/typhoon*
 
 3W-9XXX SATA-RAID CONTROLLER DRIVER
-P:      Adam Radford
-M:      linuxraid@amcc.com
+M:      Adam Radford <linuxraid@amcc.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.amcc.com
 S:      Supported
 F:      drivers/scsi/3w-9xxx*
 
 3W-XXXX ATA-RAID CONTROLLER DRIVER
-P:      Adam Radford
-M:      linuxraid@amcc.com
+M:      Adam Radford <linuxraid@amcc.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.amcc.com
 S:      Supported
 F:      drivers/scsi/3w-xxxx*
 
 53C700 AND 53C700-66 SCSI DRIVER
-P:      James E.J. Bottomley
-M:      James.Bottomley@HansenPartnership.com
+M:      "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/53c700*
 
 6PACK NETWORK DRIVER FOR AX.25
-P:      Andreas Koensgen
-M:      ajk@iehk.rwth-aachen.de
+M:      Andreas Koensgen <ajk@comnets.uni-bremen.de>
 L:      linux-hams@vger.kernel.org
 S:      Maintained
 F:      drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P:      Francois Romieu
-M:      romieu@fr.zoreil.com
+M:      Francois Romieu <romieu@fr.zoreil.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P:      Alan Cox
-M:      alan@lxorguk.ukuu.org.uk
 L:      linux-serial@vger.kernel.org
 W:      http://serial.sourceforge.net
-S:      Odd Fixes
+S:      Orphan
 F:      drivers/serial/8250*
 F:      include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P:      Paul Gortmaker
-M:      p_gortmaker@yahoo.com
+M:      Paul Gortmaker <p_gortmaker@yahoo.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/*8390*
 F:      drivers/net/ax88796.c
 
 9P FILE SYSTEM
-P:      Eric Van Hensbergen
-M:      ericvh@gmail.com
-P:      Ron Minnich
-M:      rminnich@sandia.gov
-P:      Latchesar Ionkov
-M:      lucho@ionkov.net
+M:      Eric Van Hensbergen <ericvh@gmail.com>
+M:      Ron Minnich <rminnich@sandia.gov>
+M:      Latchesar Ionkov <lucho@ionkov.net>
 L:      v9fs-developer@lists.sourceforge.net
 W:      http://swik.net/v9fs
 T:      git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
@@ -194,15 +180,13 @@ F:	Documentation/filesystems/9p.txt
 F:      fs/9p/
 
 A2232 SERIAL BOARD DRIVER
-P:      Enver Haase
-M:      A2232@gmx.net
+M:      Enver Haase <A2232@gmx.net>
 L:      linux-m68k@lists.linux-m68k.org
 S:      Maintained
 F:      drivers/char/ser_a2232*
 
 AACRAID SCSI RAID DRIVER
-P:      Adaptec OEM Raid Solutions
-M:      aacraid@adaptec.com
+M:      Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.adaptec.com/
 S:      Supported
@@ -210,44 +194,38 @@ F:	Documentation/scsi/aacraid.txt
 F:      drivers/scsi/aacraid/
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P:      Hans de Goede
-M:      j.w.r.degoede@hhs.nl
+M:      Hans de Goede <j.w.r.degoede@hhs.nl>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/abituguru.c
 
 ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P:      Alistair John Strachan
-M:      alistair@devzero.co.uk
+M:      Alistair John Strachan <alistair@devzero.co.uk>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/abituguru3.c
 
 ACENIC DRIVER
-P:      Jes Sorensen
-M:      jes@trained-monkey.org
+M:      Jes Sorensen <jes@trained-monkey.org>
 L:      linux-acenic@sunsite.dk
 S:      Maintained
 F:      drivers/net/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M:      Peter Feuerer <peter@piie.net>
+W:      http://piie.net/?section=acerhdf
+S:      Maintained
+F:      drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
+M:      Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:      aceracpi@googlegroups.com (subscribers-only)
 W:      http://code.google.com/p/aceracpi
 S:      Maintained
 F:      drivers/platform/x86/acer-wmi.c
 
 ACPI
-P:      Len Brown
-M:      lenb@kernel.org
+M:      Len Brown <lenb@kernel.org>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
@@ -257,8 +235,7 @@ F:	drivers/pnp/pnpacpi/
 F:      include/linux/acpi.h
 
 ACPI BATTERY DRIVERS
-P:      Alexey Starikovskiy
-M:      astarikovskiy@suse.de
+M:      Alexey Starikovskiy <astarikovskiy@suse.de>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
@@ -266,80 +243,69 @@ F:	drivers/acpi/battery.c
 F:      drivers/acpi/*sbs*
 
 ACPI EC DRIVER
-P:      Alexey Starikovskiy
-M:      astarikovskiy@suse.de
+M:      Alexey Starikovskiy <astarikovskiy@suse.de>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
 F:      drivers/acpi/ec.c
 
 ACPI FAN DRIVER
-P:      Zhang Rui
-M:      rui.zhang@intel.com
+M:      Zhang Rui <rui.zhang@intel.com>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
 F:      drivers/acpi/fan.c
 
 ACPI PCI HOTPLUG DRIVER
-P:      Kristen Carlson Accardi
-M:      kristen.c.accardi@intel.com
+M:      Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:      linux-pci@vger.kernel.org
 S:      Supported
 F:      drivers/pci/hotplug/acpi*
 
 ACPI THERMAL DRIVER
-P:      Zhang Rui
-M:      rui.zhang@intel.com
+M:      Zhang Rui <rui.zhang@intel.com>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
 F:      drivers/acpi/*thermal*
 
 ACPI VIDEO DRIVER
-P:      Zhang Rui
-M:      rui.zhang@intel.com
+M:      Zhang Rui <rui.zhang@intel.com>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
 F:      drivers/acpi/video.c
 
 ACPI WMI DRIVER
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
+M:      Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Maintained
 F:      drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-P:      Kyle McMartin
-M:      kyle@mcmartin.ca
-P:      Thibaut Varene
-M:      T-Bone@parisc-linux.org
+M:      Kyle McMartin <kyle@mcmartin.ca>
+M:      Thibaut Varene <T-Bone@parisc-linux.org>
 W:      http://wiki.parisc-linux.org/AD1889
 L:      linux-parisc@vger.kernel.org
 S:      Maintained
 F:      sound/pci/ad1889.*
 
 ADM1025 HARDWARE MONITOR DRIVER
-P:      Jean Delvare
-M:      khali@linux-fr.org
+M:      Jean Delvare <khali@linux-fr.org>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/adm1025
 F:      drivers/hwmon/adm1025.c
 
 ADM1029 HARDWARE MONITOR DRIVER
-P:      Corentin Labbe
-M:      corentin.labbe@geomatys.fr
+M:      Corentin Labbe <corentin.labbe@geomatys.fr>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/adm1029.c
 
 ADM8211 WIRELESS DRIVER
-P:      Michael Wu
-M:      flamingice@sourmilk.net
+M:      Michael Wu <flamingice@sourmilk.net>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -347,35 +313,30 @@ S:	Maintained
 F:      drivers/net/wireless/adm8211.*
 
 ADT746X FAN DRIVER
-P:      Colin Leroy
-M:      colin@colino.net
+M:      Colin Leroy <colin@colino.net>
 S:      Maintained
 F:      drivers/macintosh/therm_adt746x.c
 
 ADVANSYS SCSI DRIVER
-P:      Matthew Wilcox
-M:      matthew@wil.cx
+M:      Matthew Wilcox <matthew@wil.cx>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      Documentation/scsi/advansys.txt
 F:      drivers/scsi/advansys.c
 
 AEDSP16 DRIVER
-P:      Riccardo Facchetti
-M:      fizban@tin.it
+M:      Riccardo Facchetti <fizban@tin.it>
 S:      Maintained
 F:      sound/oss/aedsp16.c
 
 AFFS FILE SYSTEM
-P:      Roman Zippel
-M:      zippel@linux-m68k.org
+M:      Roman Zippel <zippel@linux-m68k.org>
 S:      Maintained
 F:      Documentation/filesystems/affs.txt
 F:      fs/affs/
 
 AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P:      David Howells
-M:      dhowells@redhat.com
+M:      David Howells <dhowells@redhat.com>
 L:      linux-afs@lists.infradead.org
 S:      Supported
 F:      fs/afs/
@@ -383,40 +344,35 @@ F:	include/net/af_rxrpc.h
 F:      net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
-P:      David Airlie
-M:      airlied@linux.ie
+M:      David Airlie <airlied@linux.ie>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:      Maintained
 F:      drivers/char/agp/
 F:      include/linux/agp*
 
 AHA152X SCSI DRIVER
-P:      Juergen E. Fischer
-M:      fischer@norbit.de
+M:      "Juergen E. Fischer" <fischer@norbit.de>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/aha152x*
 F:      drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-P:      Hannes Reinecke
-M:      hare@suse.de
+M:      Hannes Reinecke <hare@suse.de>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/aic7xxx/
 F:      drivers/scsi/aic7xxx_old/
 
 AIO
-P:      Benjamin LaHaise
-M:      bcrl@kvack.org
+M:      Benjamin LaHaise <bcrl@kvack.org>
 L:      linux-aio@kvack.org
 S:      Supported
 F:      fs/aio.c
 F:      include/linux/*aio*.h
 
 ALCATEL SPEEDTOUCH USB DRIVER
-P:      Duncan Sands
-M:      duncan.sands@free.fr
+M:      Duncan Sands <duncan.sands@free.fr>
 L:      linux-usb@vger.kernel.org
 W:      http://www.linux-usb.org/SpeedTouch/
 S:      Maintained
@@ -424,32 +380,27 @@ F:	drivers/usb/atm/speedtch.c
 F:      drivers/usb/atm/usbatm.c
 
 ALCHEMY AU1XX0 MMC DRIVER
-P:      Manuel Lauss
-M:      manuel.lauss@gmail.com
+M:      Manuel Lauss <manuel.lauss@gmail.com>
 S:      Maintained
 F:      drivers/mmc/host/au1xmmc.c
 
 ALI1563 I2C DRIVER
-P:      Rudolf Marek
-M:      r.marek@assembler.cz
+M:      Rudolf Marek <r.marek@assembler.cz>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      Documentation/i2c/busses/i2c-ali1563
 F:      drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
-P:      Richard Henderson
-M:      rth@twiddle.net
+M:      Richard Henderson <rth@twiddle.net>
 S:      Odd Fixes for 2.4; Maintained for 2.6.
-P:      Ivan Kokshaysky
-M:      ink@jurassic.park.msu.ru
+M:      Ivan Kokshaysky <ink@jurassic.park.msu.ru>
 S:      Maintained for 2.4; PCI support for 2.6.
 L:      linux-alpha@vger.kernel.org
 F:      arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P:      Thomas Dahlmann
-M:      dahlmann.thomas@arcor.de
+M:      Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:      linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:      Supported
 F:      drivers/usb/gadget/amd5536udc.*
@@ -466,8 +417,7 @@ F:	drivers/video/geode/
 F:      arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-P:      Joerg Roedel
-M:      joerg.roedel@amd.com
+M:      Joerg Roedel <joerg.roedel@amd.com>
 L:      iommu@lists.linux-foundation.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:      Supported
@@ -475,40 +425,33 @@ F:	arch/x86/kernel/amd_iommu*.c
 F:      arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
-P:      Andreas Herrmann
-M:      andreas.herrmann3@amd.com
+M:      Andreas Herrmann <andreas.herrmann3@amd.com>
 L:      amd64-microcode@amd64.org
 S:      Supported
 F:      arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
-P:      Stelian Pop
-M:      stelian@popies.net
-P:      Michael Hanselmann
-M:      linux-kernel@hansmi.ch
+M:      Stelian Pop <stelian@popies.net>
+M:      Michael Hanselmann <linux-kernel@hansmi.ch>
 S:      Supported
 F:      drivers/hwmon/ams/
 
 AMSO1100 RNIC DRIVER
-P:      Tom Tucker
-M:      tom@opengridcomputing.com
-P:      Steve Wise
-M:      swise@opengridcomputing.com
+M:      Tom Tucker <tom@opengridcomputing.com>
+M:      Steve Wise <swise@opengridcomputing.com>
 L:      general@lists.openfabrics.org
 S:      Maintained
 F:      drivers/infiniband/hw/amso1100/
 
 AOA (Apple Onboard Audio) ALSA DRIVER
-P:      Johannes Berg
-M:      johannes@sipsolutions.net
+M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linuxppc-dev@ozlabs.org
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:      Maintained
 F:      sound/aoa/
 
 APM DRIVER
-P:      Stephen Rothwell
-M:      sfr@canb.auug.org.au
+M:      Stephen Rothwell <sfr@canb.auug.org.au>
 L:      linux-laptop@vger.kernel.org
 W:      http://www.canb.auug.org.au/~sfr/
 S:      Supported
@@ -516,51 +459,44 @@ F:	arch/x86/kernel/apm_32.c
 F:      include/linux/apm_bios.h
 
 APPLE BCM5974 MULTITOUCH DRIVER
-P:      Henrik Rydberg
-M:      rydberg@euromail.se
+M:      Henrik Rydberg <rydberg@euromail.se>
 L:      linux-input@vger.kernel.org
 S:      Maintained
 F:      drivers/input/mouse/bcm5974.c
 
 APPLE SMC DRIVER
-P:      Nicolas Boichat
-M:      nicolas@boichat.ch
+M:      Nicolas Boichat <nicolas@boichat.ch>
 L:      mactel-linux-devel@lists.sourceforge.net
 S:      Maintained
 F:      drivers/hwmon/applesmc.c
 
 APPLETALK NETWORK LAYER
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:      Maintained
 F:      drivers/net/appletalk/
 F:      net/appletalk/
 
 APPLETOUCH TOUCHPAD DRIVER
-P:      Johannes Berg
-M:      johannes@sipsolutions.net
+M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linux-input@vger.kernel.org
 S:      Maintained
 F:      Documentation/input/appletouch.txt
 F:      drivers/input/mouse/appletouch.c
 
 ARC FRAMEBUFFER DRIVER
-P:      Jaya Kumar
-M:      jayalk@intworks.biz
+M:      Jaya Kumar <jayalk@intworks.biz>
 S:      Maintained
 F:      drivers/video/arcfb.c
 F:      drivers/video/fb_defio.c
 
 ARM MFM AND FLOPPY DRIVERS
-P:      Ian Molton
-M:      spyro@f2s.com
+M:      Ian Molton <spyro@f2s.com>
 S:      Maintained
 F:      arch/arm/lib/floppydma.S
 F:      arch/arm/include/asm/floppy.h
 
 ARM PORT
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
@@ -571,48 +507,43 @@ S:	Orphan
 F:      drivers/mmc/host/mmci.*
 
 ARM/ADI ROADRUNNER MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      arch/arm/mach-ixp23xx/
 F:      arch/arm/mach-ixp23xx/include/mach/
 
 ARM/ADS SPHERE MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/AFEB9260 MACHINE SUPPORT
-P:      Sergey Lapin
-M:      slapin@ossfans.org
+M:      Sergey Lapin <slapin@ossfans.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/AJECO 1ARM MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:      Andrew Victor
-M:      linux@maxim.org.za
+M:      Andrew Victor <linux@maxim.org.za>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://maxim.org.za/at91_26.html
 S:      Maintained
 
 ARM/BCMRING ARM ARCHITECTURE
-P:      Leo Chen <leochen@broadcom.com>
-P:      Scott Branden <sbranden@broadcom.com>
+M:      Leo Chen <leochen@broadcom.com>
+M:      Scott Branden <sbranden@broadcom.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      arch/arm/mach-bcmring
 
 ARM/BCMRING MTD NAND DRIVER
-P:      Leo Chen <leochen@broadcom.com>
-P:      Scott Branden <sbranden@broadcom.com>
+M:      Leo Chen <leochen@broadcom.com>
+M:      Scott Branden <sbranden@broadcom.com>
 L:      linux-mtd@lists.infradead.org
 S:      Maintained
 F:      drivers/mtd/nand/bcm_umi_nand.c
@@ -621,50 +552,42 @@ F:	drivers/mtd/nand/bcm_umi_hamming.c
 F:      drivers/mtd/nand/nand_bcm_umi.h
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:      Hartley Sweeten
-M:      hsweeten@visionengravers.com
-P:      Ryan Mallon
-M:      ryan@bluewatersys.com
+M:      Hartley Sweeten <hsweeten@visionengravers.com>
+M:      Ryan Mallon <ryan@bluewatersys.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      arch/arm/mach-ep93xx/
 F:      arch/arm/mach-ep93xx/include/mach/
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/CLKDEV SUPPORT
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 F:      arch/arm/common/clkdev.c
 F:      arch/arm/include/asm/clkdev.h
 
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P:      Mike Rapoport
-M:      mike@compulab.co.il
+M:      Mike Rapoport <mike@compulab.co.il>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/CORGI MACHINE SUPPORT
-P:      Richard Purdie
-M:      rpurdie@rpsys.net
+M:      Richard Purdie <rpurdie@rpsys.net>
 S:      Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P:      Paulius Zaleckas
-M:      paulius.zaleckas@teltonika.lt
+M:      Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:      git git://gitorious.org/linux-gemini/mainline.git
 S:      Maintained
 F:      arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
@@ -672,12 +595,9 @@ F:	arch/arm/mach-ebsa110/
 F:      drivers/net/arm/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P:      Daniel Ribeiro
-M:      drwyrm@gmail.com
-P:      Stefan Schmidt
-M:      stefan@openezx.org
-P:      Harald Welte
-M:      laforge@openezx.org
+M:      Daniel Ribeiro <drwyrm@gmail.com>
+M:      Stefan Schmidt <stefan@openezx.org>
+M:      Harald Welte <laforge@openezx.org>
 L:      openezx-devel@lists.openezx.org (subscribers-only)
 W:      http://www.openezx.org/
 S:      Maintained
@@ -685,15 +605,13 @@ T:	topgit git://git.openezx.org/openezx.git
 F:      arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-P:      Paulius Zaleckas
-M:      paulius.zaleckas@teltonika.lt
+M:      Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
@@ -701,175 +619,158 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:      arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P:      Sascha Hauer
-M:      kernel@pengutronix.de
+M:      Sascha Hauer <kernel@pengutronix.de>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/GUMSTIX MACHINE SUPPORT
-P:      Steve Sakoman
-M:      sakoman@gmail.com
+M:      Steve Sakoman <sakoman@gmail.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P:      Philipp Zabel
-M:      philipp.zabel@gmail.com
+M:      Philipp Zabel <philipp.zabel@gmail.com>
 S:      Maintained
 F:      arch/arm/mach-pxa/hx4700.c
 F:      arch/arm/mach-pxa/include/mach/hx4700.h
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:      Kristoffer Ericson
-M:      kristoffer.ericson@gmail.com
+M:      Kristoffer Ericson <kristoffer.ericson@gmail.com>
 W:      www.jlime.com
 S:      Maintained
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F:      arch/arm/mach-sa1100/jornada720.c
+F:      arch/arm/mach-sa1100/include/mach/jornada720.h
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Lennert Buytenhek <kernel@wantstofly.org>
+M:      Dan Williams <dan.j.williams@intel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Dan Williams <dan.j.williams@intel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Lennert Buytenhek <kernel@wantstofly.org>
+M:      Dan Williams <dan.j.williams@intel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Lennert Buytenhek <kernel@wantstofly.org>
+M:      Dan Williams <dan.j.williams@intel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/INTEL IXDP2850 MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/INTEL IXP23XX ARM ARCHITECTURE
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/INTEL XSC3 (MANZANO) ARM CORE
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Lennert Buytenhek <kernel@wantstofly.org>
+M:      Dan Williams <dan.j.williams@intel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/MAGICIAN MACHINE SUPPORT
-P:      Philipp Zabel
-M:      philipp.zabel@gmail.com
+M:      Philipp Zabel <philipp.zabel@gmail.com>
+S:      Maintained
+
+ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
+M:      Lennert Buytenhek <buytenh@marvell.com>
+M:      Nicolas Pitre <nico@marvell.com>
+L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T:      git git://git.marvell.com/orion
 S:      Maintained
+F:      arch/arm/mach-loki/
+F:      arch/arm/mach-kirkwood/
+F:      arch/arm/mach-mv78xx0/
+F:      arch/arm/mach-orion5x/
+F:      arch/arm/plat-orion/
 
 ARM/MIOA701 MACHINE SUPPORT
-P:      Robert Jarzmik
-M:      robert.jarzmik@free.fr
+M:      Robert Jarzmik <robert.jarzmik@free.fr>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 F:      arch/arm/mach-pxa/mioa701.c
 S:      Maintained
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P:      Michael Petchkovsky
-M:      mkpetch@internode.on.net
+M:      Michael Petchkovsky <mkpetch@internode.on.net>
 S:      Maintained
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P:      Nelson Castillo
-M:      arhuaco@freaks-unidos.net
+M:      Nelson Castillo <arhuaco@freaks-unidos.net>
 L:      openmoko-kernel@lists.openmoko.org (subscribers-only)
 W:      http://wiki.openmoko.org/wiki/Neo_FreeRunner
 S:      Supported
 
 ARM/TOSA MACHINE SUPPORT
-P:      Dmitry Eremin-Solenikov
-M:      dbaryshkov@gmail.com
-P:      Dirk Opfer
-M:      dirk@opfer-online.de
+M:      Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:      Dirk Opfer <dirk@opfer-online.de>
 S:      Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P:      Marek Vasut
-M:      marek.vasut@gmail.com
+M:      Marek Vasut <marek.vasut@gmail.com>
 W:      http://hackndev.com
 S:      Maintained
 
 ARM/PALM TREO 680 SUPPORT
-P:      Tomas Cech
-M:      sleep_walker@suse.cz
+M:      Tomas Cech <sleep_walker@suse.cz>
 W:      http://hackndev.com
 S:      Maintained
 
 ARM/PALMZ72 SUPPORT
-P:      Sergey Lapin
-M:      slapin@ossfans.org
+M:      Sergey Lapin <slapin@ossfans.org>
 W:      http://hackndev.com
 S:      Maintained
 
 ARM/PLEB SUPPORT
-P:      Peter Chubb
-M:      pleb@gelato.unsw.edu.au
+M:      Peter Chubb <pleb@gelato.unsw.edu.au>
 W:      http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 S:      Maintained
 
 ARM/PT DIGITAL BOARD PORT
-P:      Stefan Eletzhofer
-M:      stefan.eletzhofer@eletztrick.de
+M:      Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/RISCPC ARCHITECTURE
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
@@ -883,14 +784,12 @@ F:	drivers/net/arm/ether*
 F:      drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
-P:      Alexander Schulz
-M:      alex@shark-linux.de
+M:      Alexander Schulz <alex@shark-linux.de>
 W:      http://www.shark-linux.de/shark.html
 S:      Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
@@ -898,91 +797,73 @@ F:	arch/arm/plat-s3c/
 F:      arch/arm/plat-s3c24xx/
 
 ARM/S3C2410 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c2440/
 
 ARM/S3C2442 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c2442/
 
 ARM/S3C2443 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c2443/
 
 ARM/S3C6400 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c6400/
 
 ARM/S3C6410 ARM ARCHITECTURE
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.fluff.org/ben/linux/
 S:      Maintained
 F:      arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/THECUS N2100 MACHINE SUPPORT
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P:      Wan ZongShun
-M:      mcuos.com@gmail.com
+M:      Wan ZongShun <mcuos.com@gmail.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.mcuos.com
 S:      Maintained
 
 ARM/VFP SUPPORT
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
 F:      arch/arm/vfp/
 
-ARPD SUPPORT
-P:      Jonathan Layes
-L:      netdev@vger.kernel.org
-S:      Maintained
-F:      net/ipv4/arp.c
-
 ASUS ACPI EXTRAS DRIVER
-P:      Corentin Chary
-M:      corentincj@iksaif.net
-P:      Karol Kozimor
-M:      sziwan@users.sourceforge.net
+M:      Corentin Chary <corentincj@iksaif.net>
+M:      Karol Kozimor <sziwan@users.sourceforge.net>
 L:      acpi4asus-user@lists.sourceforge.net
 W:      http://acpi4asus.sf.net
 S:      Maintained
@@ -990,25 +871,21 @@ F:	arch/x86/kernel/acpi/boot.c
 F:      drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
-P:      Mark M. Hoffman
-M:      mhoffman@lightlink.com
+M:      "Mark M. Hoffman" <mhoffman@lightlink.com>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/asb100.c
 
 ASUS LAPTOP EXTRAS DRIVER
-P:      Corentin Chary
-M:      corentincj@iksaif.net
+M:      Corentin Chary <corentincj@iksaif.net>
 L:      acpi4asus-user@lists.sourceforge.net
 W:      http://acpi4asus.sf.net
 S:      Maintained
 F:      drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P:      Dan Williams
-M:      dan.j.williams@intel.com
-P:      Maciej Sosnowski
-M:      maciej.sosnowski@intel.com
+M:      Dan Williams <dan.j.williams@intel.com>
+M:      Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:      http://sourceforge.net/projects/xscaleiop
 S:      Supported
 F:      Documentation/crypto/async-tx-api.txt
@@ -1018,64 +895,49 @@ F:	include/linux/dmaengine.h
 F:      include/linux/async_tx.h
 
 ATA OVER ETHERNET (AOE) DRIVER
-P:      Ed L. Cashin
-M:      ecashin@coraid.com
+M:      "Ed L. Cashin" <ecashin@coraid.com>
 W:      http://www.coraid.com/support/linux
 S:      Supported
 F:      Documentation/aoe/
 F:      drivers/block/aoe/
 
 ATHEROS ATH5K WIRELESS DRIVER
-P:      Jiri Slaby
-M:      jirislaby@gmail.com
-P:      Nick Kossifidis
-M:      mickflemm@gmail.com
-P:      Luis R. Rodriguez
-M:      lrodriguez@atheros.com
-P:      Bob Copeland
-M:      me@bobcopeland.com
+M:      Jiri Slaby <jirislaby@gmail.com>
+M:      Nick Kossifidis <mickflemm@gmail.com>
+M:      "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:      Bob Copeland <me@bobcopeland.com>
 L:      linux-wireless@vger.kernel.org
 L:      ath5k-devel@lists.ath5k.org
 S:      Maintained
 F:      drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
-P:      Luis R. Rodriguez
-M:      lrodriguez@atheros.com
-P:      Jouni Malinen
-M:      jmalinen@atheros.com
-P:      Sujith Manoharan
-M:      Sujith.Manoharan@atheros.com
-P:      Vasanthakumar Thiagarajan
-M:      vasanth@atheros.com
-P:      Senthil Balasubramanian
-M:      senthilkumar@atheros.com
+M:      "Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:      Jouni Malinen <jmalinen@atheros.com>
+M:      Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M:      Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M:      Senthil Balasubramanian <senthilkumar@atheros.com>
 L:      linux-wireless@vger.kernel.org
 L:      ath9k-devel@lists.ath9k.org
 S:      Supported
 F:      drivers/net/wireless/ath/ath9k/
 
 ATHEROS AR9170 WIRELESS DRIVER
-P:      Christian Lamparter
-M:      chunkeey@web.de
+M:      Christian Lamparter <chunkeey@web.de>
 L:      linux-wireless@vger.kernel.org
 W:      http://wireless.kernel.org/en/users/Drivers/ar9170
 S:      Maintained
 F:      drivers/net/wireless/ath/ar9170/
 
 ATI_REMOTE2 DRIVER
-P:      Ville Syrjala
-M:      syrjala@sci.fi
+M:      Ville Syrjala <syrjala@sci.fi>
 S:      Maintained
 F:      drivers/input/misc/ati_remote2.c
 
 ATLX ETHERNET DRIVERS
-P:      Jay Cliburn
-M:      jcliburn@gmail.com
-P:      Chris Snook
-M:      csnook@redhat.com
-P:      Jie Yang
-M:      jie.yang@atheros.com
+M:      Jay Cliburn <jcliburn@gmail.com>
+M:      Chris Snook <csnook@redhat.com>
+M:      Jie Yang <jie.yang@atheros.com>
 L:      atl1-devel@lists.sourceforge.net
 W:      http://sourceforge.net/projects/atl1
 W:      http://atl1.sourceforge.net
@@ -1083,8 +945,7 @@ S:	Maintained
 F:      drivers/net/atlx/
 
 ATM
-P:      Chas Williams
-M:      chas@cmf.nrl.navy.mil
+M:      Chas Williams <chas@cmf.nrl.navy.mil>
 L:      linux-atm-general@lists.sourceforge.net (subscribers-only)
 L:      netdev@vger.kernel.org
 W:      http://linux-atm.sourceforge.net
@@ -1093,8 +954,7 @@ F:	drivers/atm/
 F:      include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-P:      Nicolas Ferre
-M:      nicolas.ferre@atmel.com
+M:      Nicolas Ferre <nicolas.ferre@atmel.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.atmel.com/products/AT91/
 W:      http://www.at91.com/
@@ -1102,49 +962,42 @@ S:	Maintained
 F:      drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-P:      Nicolas Ferre
-M:      nicolas.ferre@atmel.com
+M:      Nicolas Ferre <nicolas.ferre@atmel.com>
 S:      Maintained
 F:      drivers/mmc/host/atmel-mci.c
 F:      drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:      Supported
 F:      drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
-P:      Nicolas Ferre
-M:      nicolas.ferre@atmel.com
+M:      Nicolas Ferre <nicolas.ferre@atmel.com>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/atmel_lcdfb.c
 F:      include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:      Supported
 F:      drivers/net/macb.*
 
 ATMEL SPI DRIVER
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:      Supported
 F:      drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 L:      kernel@avr32linux.org
 W:      http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:      Supported
 F:      drivers/usb/gadget/atmel_usba_udc.*
 
 ATMEL WIRELESS DRIVER
-P:      Simon Kelley
-M:      simon@thekelleys.org.uk
+M:      Simon Kelley <simon@thekelleys.org.uk>
 L:      linux-wireless@vger.kernel.org
 W:      http://www.thekelleys.org.uk/atmel
 W:      http://atmelwlandriver.sourceforge.net/
@@ -1152,10 +1005,8 @@ S:	Maintained
 F:      drivers/net/wireless/atmel*
 
 AUDIT SUBSYSTEM
-P:      Al Viro
-M:      viro@zeniv.linux.org.uk
-P:      Eric Paris
-M:      eparis@redhat.com
+M:      Al Viro <viro@zeniv.linux.org.uk>
+M:      Eric Paris <eparis@redhat.com>
 L:      linux-audit@redhat.com (subscribers-only)
 W:      http://people.redhat.com/sgrubb/audit/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
@@ -1164,8 +1015,7 @@ F:	include/linux/audit.h
 F:      kernel/audit*
 
 AUXILIARY DISPLAY DRIVERS
-P:      Miguel Ojeda Sandonis
-M:      miguel.ojeda.sandonis@gmail.com
+M:      Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:      http://miguelojeda.es/auxdisplay.htm
 W:      http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:      Maintained
@@ -1173,8 +1023,7 @@ F:	drivers/auxdisplay/
 F:      include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 W:      http://www.atmel.com/products/AVR32/
 W:      http://avr32linux.org/
 W:      http://avrfreaks.net/
@@ -1182,14 +1031,12 @@ S:	Supported
 F:      arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:      Supported
 F:      arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
-P:      Ralf Baechle
-M:      ralf@linux-mips.org
+M:      Ralf Baechle <ralf@linux-mips.org>
 L:      linux-hams@vger.kernel.org
 W:      http://www.linux-ax25.org/
 S:      Maintained
@@ -1198,128 +1045,110 @@ F:	include/net/ax25.h
 F:      net/ax25/
 
 B43 WIRELESS DRIVER
-P:      Michael Buesch
-M:      mb@bu3sch.de
-P:      Stefano Brivio
-M:      stefano.brivio@polimi.it
+M:      Michael Buesch <mb@bu3sch.de>
+M:      Stefano Brivio <stefano.brivio@polimi.it>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/en/users/Drivers/b43
 S:      Maintained
 F:      drivers/net/wireless/b43/
 
 B43LEGACY WIRELESS DRIVER
-P:      Larry Finger
-M:      Larry.Finger@lwfinger.net
-P:      Stefano Brivio
-M:      stefano.brivio@polimi.it
+M:      Larry Finger <Larry.Finger@lwfinger.net>
+M:      Stefano Brivio <stefano.brivio@polimi.it>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/en/users/Drivers/b43
 S:      Maintained
 F:      drivers/net/wireless/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
-P:      Richard Purdie
-M:      rpurdie@rpsys.net
+M:      Richard Purdie <rpurdie@rpsys.net>
 S:      Maintained
 F:      drivers/video/backlight/
 F:      include/linux/backlight.h
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P:      Thomas Sailer
-M:      t.sailer@alumni.ethz.ch
+M:      Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:      linux-hams@vger.kernel.org
 W:      http://www.baycom.org/~tom/ham/ham.html
 S:      Maintained
 F:      drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-P:      Sergey S. Kostyliov
-M:      rathamahata@php4.ru
+M:      "Sergey S. Kostyliov" <rathamahata@php4.ru>
 S:      Maintained
 F:      Documentation/filesystems/befs.txt
 F:      fs/befs/
 
 BFS FILE SYSTEM
-P:      Tigran A. Aivazian
-M:      tigran@aivazian.fsnet.co.uk
+M:      "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:      Maintained
 F:      Documentation/filesystems/bfs.txt
 F:      fs/bfs/
 F:      include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:      Mike Frysinger
-M:      vapier@gentoo.org
+M:      Mike Frysinger <vapier@gentoo.org>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org
 S:      Supported
 F:      arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:      Michael Hennerich
-M:      michael.hennerich@analog.com
+M:      Michael Hennerich <michael.hennerich@analog.com>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org
 S:      Supported
 F:      drivers/net/bfin_mac.*
 
 BLACKFIN RTC DRIVER
-P:      Mike Frysinger
-M:      vapier.adi@gmail.com
+M:      Mike Frysinger <vapier.adi@gmail.com>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org
 S:      Supported
 F:      drivers/rtc/rtc-bfin.c
 
 BLACKFIN SERIAL DRIVER
-P:      Sonic Zhang
-M:      sonic.zhang@analog.com
+M:      Sonic Zhang <sonic.zhang@analog.com>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org
 S:      Supported
 F:      drivers/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
-P:      Mike Frysinger
-M:      vapier.adi@gmail.com
+M:      Mike Frysinger <vapier.adi@gmail.com>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org
 S:      Supported
 F:      drivers/watchdog/bfin_wdt.c
 
 BLACKFIN I2C TWI DRIVER
-P:      Sonic Zhang
-M:      sonic.zhang@analog.com
+M:      Sonic Zhang <sonic.zhang@analog.com>
 L:      uclinux-dist-devel@blackfin.uclinux.org
 W:      http://blackfin.uclinux.org/
 S:      Supported
 F:      drivers/i2c/busses/i2c-bfin-twi.c
 
 BLOCK LAYER
-P:      Jens Axboe
-M:      axboe@kernel.dk
+M:      Jens Axboe <axboe@kernel.dk>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:      Maintained
 F:      block/
 
 BLOCK2MTD DRIVER
-P:      Joern Engel
-M:      joern@lazybastard.org
+M:      Joern Engel <joern@lazybastard.org>
 L:      linux-mtd@lists.infradead.org
 S:      Maintained
 F:      drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
-P:      Marcel Holtmann
-M:      marcel@holtmann.org
+M:      Marcel Holtmann <marcel@holtmann.org>
 L:      linux-bluetooth@vger.kernel.org
 W:      http://www.bluez.org/
 S:      Maintained
 F:      drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
-P:      Marcel Holtmann
-M:      marcel@holtmann.org
+M:      Marcel Holtmann <marcel@holtmann.org>
 L:      linux-bluetooth@vger.kernel.org
 W:      http://www.bluez.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
@@ -1328,8 +1157,7 @@ F:	net/bluetooth/
 F:      include/net/bluetooth/
 
 BONDING DRIVER
-P:      Jay Vosburgh
-M:      fubar@us.ibm.com
+M:      Jay Vosburgh <fubar@us.ibm.com>
 L:      bonding-devel@lists.sourceforge.net
 W:      http://sourceforge.net/projects/bonding/
 S:      Supported
@@ -1337,54 +1165,46 @@ F:	drivers/net/bonding/
 F:      include/linux/if_bonding.h
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-P:      Gary Zambrano
-M:      zambrano@broadcom.com
+M:      Gary Zambrano <zambrano@broadcom.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P:      Michael Chan
-M:      mchan@broadcom.com
+M:      Michael Chan <mchan@broadcom.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/bnx2.*
 F:      drivers/net/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P:      Eilon Greenstein
-M:      eilong@broadcom.com
+M:      Eilon Greenstein <eilong@broadcom.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/bnx2x*
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P:      Matt Carlson
-M:      mcarlson@broadcom.com
-P:      Michael Chan
-M:      mchan@broadcom.com
+M:      Matt Carlson <mcarlson@broadcom.com>
+M:      Michael Chan <mchan@broadcom.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/tg3.*
 
 BSG (block layer generic sg v4 driver)
-P:      FUJITA Tomonori
-M:      fujita.tomonori@lab.ntt.co.jp
+M:      FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:      linux-scsi@vger.kernel.org
 S:      Supported
 F:      block/bsg.c
 F:      include/linux/bsg.h
 
 BT8XXGPIO DRIVER
-P:      Michael Buesch
-M:      mb@bu3sch.de
+M:      Michael Buesch <mb@bu3sch.de>
 W:      http://bu3sch.de/btgpio.php
 S:      Maintained
 F:      drivers/gpio/bt8xxgpio.c
 
 BTRFS FILE SYSTEM
-P:      Chris Mason
-M:      chris.mason@oracle.com
+M:      Chris Mason <chris.mason@oracle.com>
 L:      linux-btrfs@vger.kernel.org
 W:      http://btrfs.wiki.kernel.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
@@ -1393,8 +1213,7 @@ F:	Documentation/filesystems/btrfs.txt
 F:      fs/btrfs/
 
 BTTV VIDEO4LINUX DRIVER
-P:      Mauro Carvalho Chehab
-M:      mchehab@infradead.org
+M:      Mauro Carvalho Chehab <mchehab@infradead.org>
 L:      linux-media@vger.kernel.org
 W:      http://linuxtv.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -1403,16 +1222,14 @@ F:	Documentation/video4linux/bttv/
 F:      drivers/media/video/bt8xx/bttv*
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P:      David Howells
-M:      dhowells@redhat.com
+M:      David Howells <dhowells@redhat.com>
 L:      linux-cachefs@redhat.com
 S:      Supported
 F:      Documentation/filesystems/caching/cachefiles.txt
 F:      fs/cachefiles/
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:      Jonathan Corbet
-M:      corbet@lwn.net
+M:      Jonathan Corbet <corbet@lwn.net>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
@@ -1420,10 +1237,8 @@ F:	Documentation/video4linux/cafe_ccic
 F:      drivers/media/video/cafe_ccic*
 
 CALGARY x86-64 IOMMU
-P:      Muli Ben-Yehuda
-M:      muli@il.ibm.com
-P:      Jon D. Mason
-M:      jdmason@kudzu.us
+M:      Muli Ben-Yehuda <muli@il.ibm.com>
+M:      "Jon D. Mason" <jdmason@kudzu.us>
 L:      discuss@x86-64.org
 S:      Maintained
 F:      arch/x86/kernel/pci-calgary_64.c
@@ -1432,10 +1247,8 @@ F:	arch/x86/include/asm/calgary.h
 F:      arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-P:      Urs Thuermann
-M:      urs.thuermann@volkswagen.de
-P:      Oliver Hartkopp
-M:      oliver.hartkopp@volkswagen.de
+M:      Urs Thuermann <urs.thuermann@volkswagen.de>
+M:      Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 L:      socketcan-core@lists.berlios.de (subscribers-only)
 W:      http://developer.berlios.de/projects/socketcan/
 S:      Maintained
@@ -1444,15 +1257,13 @@ F:	include/linux/can/
 F:      include/linux/can.h
 
 CAN NETWORK DRIVERS
-P:      Wolfgang Grandegger
-M:      wg@grandegger.com
+M:      Wolfgang Grandegger <wg@grandegger.com>
 L:      socketcan-core@lists.berlios.de (subscribers-only)
 W:      http://developer.berlios.de/projects/socketcan/
 S:      Maintained
 
 CELL BROADBAND ENGINE ARCHITECTURE
-P:      Arnd Bergmann
-M:      arnd@arndb.de
+M:      Arnd Bergmann <arnd@arndb.de>
 L:      linuxppc-dev@ozlabs.org
 L:      cbe-oss-dev@ozlabs.org
 W:      http://www.ibm.com/developerworks/power/cell/
@@ -1463,8 +1274,7 @@ F:	arch/powerpc/oprofile/*cell*
 F:      arch/powerpc/platforms/cell/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P:      David Vrabel
-M:      david.vrabel@csr.com
+M:      David Vrabel <david.vrabel@csr.com>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 F:      Documentation/usb/WUSB-Design-overview.txt
@@ -1473,8 +1283,7 @@ F:	drivers/usb/wusbcore/
 F:      include/linux/usb/wusb*
 
 CFAG12864B LCD DRIVER
-P:      Miguel Ojeda Sandonis
-M:      miguel.ojeda.sandonis@gmail.com
+M:      Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:      http://miguelojeda.es/auxdisplay.htm
 W:      http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:      Maintained
@@ -1482,8 +1291,7 @@ F:	drivers/auxdisplay/cfag12864b.c
 F:      include/linux/cfag12864b.h
 
 CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P:      Miguel Ojeda Sandonis
-M:      miguel.ojeda.sandonis@gmail.com
+M:      Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:      http://miguelojeda.es/auxdisplay.htm
 W:      http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:      Maintained
@@ -1491,8 +1299,7 @@ F:	drivers/auxdisplay/cfag12864bfb.c
 F:      include/linux/cfag12864b.h
 
 CFG80211 and NL80211
-P:      Johannes Berg
-M:      johannes@sipsolutions.net
+M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linux-wireless@vger.kernel.org
 S:      Maintained
 F:      include/linux/nl80211.h
@@ -1501,66 +1308,47 @@ F:	net/wireless/*
 X:      net/wireless/wext*
 
 CHECKPATCH
-P:      Andy Whitcroft
-M:      apw@canonical.com
+M:      Andy Whitcroft <apw@canonical.com>
 S:      Supported
 F:      scripts/checkpatch.pl
 
 CISCO 10G ETHERNET DRIVER
-P:      Scott Feldman
-M:      scofeldm@cisco.com
-P:      Joe Eykholt
-M:      jeykholt@cisco.com
+M:      Scott Feldman <scofeldm@cisco.com>
+M:      Joe Eykholt <jeykholt@cisco.com>
 S:      Supported
 F:      drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/arm/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-P:      Timur Tabi
-M:      timur@freescale.com
+M:      Timur Tabi <timur@freescale.com>
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:      Supported
 F:      sound/soc/codecs/cs4270*
 
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P:      Cirrus Logic Corporation (kernel 2.2 driver)
-M:      Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P:      Nils Faerber (port to kernel 2.4)
-M:      Nils Faerber <nils@kernelconcepts.de>
-S:      Maintained
-F:      Documentation/input/cs461x.txt
-F:      sound/pci/cs46xx/
-
 CLK API
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 F:      include/linux/clk.h
 
 CISCO FCOE HBA DRIVER
-P:      Abhijeet Joglekar
-M:      abjoglek@cisco.com
-P:      Joe Eykholt
-M:      jeykholt@cisco.com
+M:      Abhijeet Joglekar <abjoglek@cisco.com>
+M:      Joe Eykholt <jeykholt@cisco.com>
 L:      linux-scsi@vger.kernel.org
 S:      Supported
 F:      drivers/scsi/fnic/
 
 CODA FILE SYSTEM
-P:      Jan Harkes
-M:      jaharkes@cs.cmu.edu
+M:      Jan Harkes <jaharkes@cs.cmu.edu>
 M:      coda@cs.cmu.edu
 L:      codalist@coda.cs.cmu.edu
 W:      http://www.coda.cs.cmu.edu/
@@ -1570,8 +1358,7 @@ F:	fs/coda/
 F:      include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
-P:      Steve French
-M:      sfrench@samba.org
+M:      Steve French <sfrench@samba.org>
 L:      linux-cifs-client@lists.samba.org
 L:      samba-technical@lists.samba.org
 W:      http://linux-cifs.samba.org/
@@ -1581,63 +1368,57 @@ F:	Documentation/filesystems/cifs.txt
 F:      fs/cifs/
 
 COMPACTPCI HOTPLUG CORE
-P:      Scott Murray
-M:      scottm@somanetworks.com
-M:      scott@spiteful.org
+M:      Scott Murray <scott@spiteful.org>
 L:      linux-pci@vger.kernel.org
-S:      Supported
+S:      Maintained
 F:      drivers/pci/hotplug/cpci_hotplug*
 
 COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P:      Scott Murray
-M:      scottm@somanetworks.com
-M:      scott@spiteful.org
+M:      Scott Murray <scott@spiteful.org>
 L:      linux-pci@vger.kernel.org
-S:      Supported
+S:      Maintained
 F:      drivers/pci/hotplug/cpcihp_zt5550.*
 
 COMPACTPCI HOTPLUG GENERIC DRIVER
-P:      Scott Murray
-M:      scottm@somanetworks.com
-M:      scott@spiteful.org
+M:      Scott Murray <scott@spiteful.org>
 L:      linux-pci@vger.kernel.org
-S:      Supported
+S:      Maintained
 F:      drivers/pci/hotplug/cpcihp_generic.c
 
 COMPAL LAPTOP SUPPORT
-P:      Cezary Jackiewicz
-M:      cezary.jackiewicz@gmail.com
+M:      Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
 S:      Maintained
 F:      drivers/platform/x86/compal-laptop.c
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-P:      Michael H. Warfield
-M:      mhw@wittsend.com
+M:      "Michael H. Warfield" <mhw@wittsend.com>
 W:      http://www.wittsend.com/computone.html
 S:      Maintained
 F:      Documentation/serial/computone.txt
 F:      drivers/char/ip2/
 
 CONEXANT ACCESSRUNNER USB DRIVER
-P:      Simon Arlott
-M:      cxacru@fire.lp0.eu
+M:      Simon Arlott <cxacru@fire.lp0.eu>
 L:      accessrunner-general@lists.sourceforge.net
 W:      http://accessrunner.sourceforge.net/
 S:      Maintained
 F:      drivers/usb/atm/cxacru.c
 
 CONFIGFS
-P:      Joel Becker
-M:      joel.becker@oracle.com
+M:      Joel Becker <joel.becker@oracle.com>
 S:      Supported
 F:      fs/configfs/
 F:      include/linux/configfs.h
 
+CONNECTOR
+M:      Evgeniy Polyakov <zbr@ioremap.net>
+L:      netdev@vger.kernel.org
+S:      Maintained
+F:      drivers/connector/
+
 CONTROL GROUPS (CGROUPS)
-P:      Paul Menage
-M:      menage@google.com
-P:      Li Zefan
-M:      lizf@cn.fujitsu.com
+M:      Paul Menage <menage@google.com>
+M:      Li Zefan <lizf@cn.fujitsu.com>
 L:      containers@lists.linux-foundation.org
 S:      Maintained
 F:      include/linux/cgroup*
@@ -1645,30 +1426,26 @@ F:	kernel/cgroup*
 F:      mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-P:      Rudolf Marek
-M:      r.marek@assembler.cz
+M:      Rudolf Marek <r.marek@assembler.cz>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/coretemp
 F:      drivers/hwmon/coretemp.c
 
 COSA/SRP SYNC SERIAL DRIVER
-P:      Jan "Yenya" Kasprzak
-M:      kas@fi.muni.cz
+M:      Jan "Yenya" Kasprzak <kas@fi.muni.cz>
 W:      http://www.fi.muni.cz/~kas/cosa/
 S:      Maintained
 F:      drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-P:      Florian Fainelli
-M:      florian@openwrt.org
+M:      Florian Fainelli <florian@openwrt.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/cpmac.c
 
 CPU FREQUENCY DRIVERS
-P:      Dave Jones
-M:      davej@redhat.com
+M:      Dave Jones <davej@redhat.com>
 L:      cpufreq@vger.kernel.org
 W:      http://www.codemonkey.org.uk/projects/cpufreq/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
@@ -1678,15 +1455,13 @@ F:	drivers/cpufreq/
 F:      include/linux/cpufreq.h
 
 CPUID/MSR DRIVER
-P:      H. Peter Anvin
-M:      hpa@zytor.com
+M:      "H. Peter Anvin" <hpa@zytor.com>
 S:      Maintained
 F:      arch/x86/kernel/cpuid.c
 F:      arch/x86/kernel/msr.c
 
 CPUSETS
-P:      Paul Menage
-M:      menage@google.com
+M:      Paul Menage <menage@google.com>
 W:      http://www.bullopensource.org/cpuset/
 W:      http://oss.sgi.com/projects/cpusets/
 S:      Supported
@@ -1701,20 +1476,16 @@ F:	Documentation/filesystems/cramfs.txt
 F:      fs/cramfs/
 
 CRIS PORT
-P:      Mikael Starvik
-M:      starvik@axis.com
-P:      Jesper Nilsson
-M:      jesper.nilsson@axis.com
+M:      Mikael Starvik <starvik@axis.com>
+M:      Jesper Nilsson <jesper.nilsson@axis.com>
 L:      linux-cris-kernel@axis.com
 W:      http://developer.axis.com
 S:      Maintained
 F:      arch/cris/
 
 CRYPTO API
-P:      Herbert Xu
-M:      herbert@gondor.apana.org.au
-P:      David S. Miller
-M:      davem@davemloft.net
+M:      Herbert Xu <herbert@gondor.apana.org.au>
+M:      "David S. Miller" <davem@davemloft.net>
 L:      linux-crypto@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:      Maintained
@@ -1725,58 +1496,50 @@ F:	drivers/crypto/
 F:      include/crypto/
 
 CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P:      Neil Horman
-M:      nhorman@tuxdriver.com
+M:      Neil Horman <nhorman@tuxdriver.com>
 L:      linux-crypto@vger.kernel.org
 S:      Maintained
 
 CS5535 Audio ALSA driver
-P:      Jaya Kumar
-M:      jayakumar.alsa@gmail.com
+M:      Jaya Kumar <jayakumar.alsa@gmail.com>
 S:      Maintained
 F:      sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-P:      Hans Verkuil
-M:      hverkuil@xs4all.nl
-P:      Andy Walls
-M:      awalls@radix.net
+M:      Hans Verkuil <hverkuil@xs4all.nl>
+M:      Andy Walls <awalls@radix.net>
 L:      ivtv-devel@ivtvdriver.org
-L:      ivtv-users@ivtvdriver.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:      http://linuxtv.org
+W:      http://www.ivtvdriver.org/index.php/Cx18
 S:      Maintained
 F:      Documentation/video4linux/cx18.txt
 F:      drivers/media/video/cx18/
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-P:      Divy Le Ray
-M:      divy@chelsio.com
+M:      Divy Le Ray <divy@chelsio.com>
 L:      netdev@vger.kernel.org
 W:      http://www.chelsio.com
 S:      Supported
 F:      drivers/net/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P:      Steve Wise
-M:      swise@chelsio.com
+M:      Steve Wise <swise@chelsio.com>
 L:      general@lists.openfabrics.org
 W:      http://www.openfabrics.org
 S:      Supported
 F:      drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:      http://www.arm.linux.org.uk/
 S:      Maintained
 F:      drivers/video/cyber2000fb.*
 
 CYCLADES 2X SYNC CARD DRIVER
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 W:      http://oops.ghostprotocols.net:81/blog
 S:      Maintained
 F:      drivers/net/wan/cycx*
@@ -1793,8 +1556,7 @@ S:	Orphan
 F:      drivers/net/wan/pc300*
 
 DAMA SLAVE for AX.25
-P:      Joerg Reuter
-M:      jreuter@yaina.de
+M:      Joerg Reuter <jreuter@yaina.de>
 W:      http://yaina.de/jreuter/
 W:      http://www.qsl.net/dl1bke/
 L:      linux-hams@vger.kernel.org
@@ -1808,29 +1570,23 @@ F:	net/ax25/ax25_timer.c
 F:      net/ax25/sysctl_net_ax25.c
 
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P:      Tobias Ringstrom
-M:      tori@unhappy.mine.nu
+M:      Tobias Ringstrom <tori@unhappy.mine.nu>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      Documentation/networking/dmfe.txt
 F:      drivers/net/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-P:      Kurt Garloff
-M:      garloff@suse.de
+M:      Kurt Garloff <garloff@suse.de>
 W:      http://www.garloff.de/kurt/linux/dc390/
-P:      Guennadi Liakhovetski
-M:      g.liakhovetski@gmx.de
+M:      Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 S:      Maintained
 F:      drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-P:      Oliver Neukum
-M:      oliver@neukum.name
-P:      Ali Akcaagac
-M:      aliakc@web.de
-P:      Jamie Lenehan
-M:      lenehan@twibble.org
+M:      Oliver Neukum <oliver@neukum.name>
+M:      Ali Akcaagac <aliakc@web.de>
+M:      Jamie Lenehan <lenehan@twibble.org>
 W:      http://twibble.org/dist/dc395x/
 L:      dc395x@twibble.org
 L:      http://lists.twibble.org/mailman/listinfo/dc395x/
@@ -1839,8 +1595,7 @@ F:	Documentation/scsi/dc395x.txt
 F:      drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:      dccp@vger.kernel.org
 W:      http://linux-net.osdl.org/index.php/DCCP
 S:      Maintained
@@ -1849,8 +1604,7 @@ F:	include/linux/tfrc.h
 F:      net/dccp/
 
 DECnet NETWORK LAYER
-P:      Christine Caulfield
-M:      christine.caulfield@googlemail.com
+M:      Christine Caulfield <christine.caulfield@googlemail.com>
 W:      http://linux-decnet.sourceforge.net
 L:      linux-decnet-user@lists.sourceforge.net
 S:      Maintained
@@ -1858,40 +1612,34 @@ F:	Documentation/networking/decnet.txt
 F:      net/decnet/
 
 DEFXX FDDI NETWORK DRIVER
-P:      Maciej W. Rozycki
-M:      macro@linux-mips.org
+M:      "Maciej W. Rozycki" <macro@linux-mips.org>
 S:      Maintained
 F:      drivers/net/defxx.*
 
 DELL LAPTOP DRIVER
-P:      Matthew Garrett
-M:      mjg59@srcf.ucam.org
+M:      Matthew Garrett <mjg59@srcf.ucam.org>
 S:      Maintained
 F:      drivers/platform/x86/dell-laptop.c
 
 DELL LAPTOP SMM DRIVER
-P:      Massimo Dal Zotto
-M:      dz@debian.org
+M:      Massimo Dal Zotto <dz@debian.org>
 W:      http://www.debian.org/~dz/i8k/
 S:      Maintained
 F:      drivers/char/i8k.c
 F:      include/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P:      Doug Warzecha
-M:      Douglas_Warzecha@dell.com
+M:      Doug Warzecha <Douglas_Warzecha@dell.com>
 S:      Maintained
 F:      Documentation/dcdbas.txt
 F:      drivers/firmware/dcdbas.*
 
 DELL WMI EXTRAS DRIVER
-P:      Matthew Garrett
-M:      mjg59@srcf.ucam.org
+M:      Matthew Garrett <mjg59@srcf.ucam.org>
 S:      Maintained
 
 DEVICE NUMBER REGISTRY
-P:      Torben Mathiasen
-M:      device@lanana.org
+M:      Torben Mathiasen <device@lanana.org>
 W:      http://lanana.org/docs/device-list/index.html
 S:      Maintained
 
@@ -1906,8 +1654,7 @@ F:	include/linux/device-mapper.h
 F:      include/linux/dm-*.h
 
 DIGI INTL. EPCA DRIVER
-P:      Digi International, Inc
-M:      Eng.Linux@digi.com
+M:      "Digi International, Inc" <Eng.Linux@digi.com>
 L:      Eng.Linux@digi.com
 W:      http://www.digi.com
 S:      Orphan
@@ -1916,34 +1663,29 @@ F:	drivers/char/epca*
 F:      drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:      Eric Paris
-M:      eparis@parisplace.org
+M:      Eric Paris <eparis@parisplace.org>
 S:      Maintained
 F:      Documentation/filesystems/dnotify.txt
 F:      fs/notify/dnotify/
 F:      include/linux/dnotify.h
 
 DISK GEOMETRY AND PARTITION HANDLING
-P:      Andries Brouwer
-M:      aeb@cwi.nl
+M:      Andries Brouwer <aeb@cwi.nl>
 W:      http://www.win.tue.nl/~aeb/linux/Large-Disk.html
 W:      http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
 W:      http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
 S:      Maintained
 
 DISKQUOTA
-P:      Jan Kara
-M:      jack@suse.cz
+M:      Jan Kara <jack@suse.cz>
 S:      Maintained
 F:      Documentation/filesystems/quota.txt
 F:      fs/quota/
 F:      include/linux/quota*.h
 
 DISTRIBUTED LOCK MANAGER (DLM)
-P:      Christine Caulfield
-M:      ccaulfie@redhat.com
-P:      David Teigland
-M:      teigland@redhat.com
+M:      Christine Caulfield <ccaulfie@redhat.com>
+M:      David Teigland <teigland@redhat.com>
 L:      cluster-devel@redhat.com
 W:      http://sources.redhat.com/cluster/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
@@ -1951,52 +1693,44 @@ S:	Supported
 F:      fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P:      Maciej Sosnowski
-M:      maciej.sosnowski@intel.com
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:      Dan Williams <dan.j.williams@intel.com>
 S:      Supported
 F:      drivers/dma/
 F:      include/linux/dma*
 
 DME1737 HARDWARE MONITOR DRIVER
-P:      Juerg Haefliger
-M:      juergh@gmail.com
+M:      Juerg Haefliger <juergh@gmail.com>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/dme1737
 F:      drivers/hwmon/dme1737.c
 
 DOCBOOK FOR DOCUMENTATION
-P:      Randy Dunlap
-M:      rdunlap@xenotime.net
+M:      Randy Dunlap <rdunlap@xenotime.net>
 S:      Maintained
 
 DOCKING STATION DRIVER
-P:      Shaohua Li
-M:      shaohua.li@intel.com
+M:      Shaohua Li <shaohua.li@intel.com>
 L:      linux-acpi@vger.kernel.org
 S:      Supported
 F:      drivers/acpi/dock.c
 
 DOCUMENTATION
-P:      Randy Dunlap
-M:      rdunlap@xenotime.net
+M:      Randy Dunlap <rdunlap@xenotime.net>
 L:      linux-doc@vger.kernel.org
 S:      Maintained
 F:      Documentation/
 
 DOUBLETALK DRIVER
-P:      James R. Van Zandt
-M:      jrv@vanzandt.mv.com
+M:      "James R. Van Zandt" <jrv@vanzandt.mv.com>
 L:      blinux-list@redhat.com
 S:      Maintained
 F:      drivers/char/dtlk.c
 F:      include/linux/dtlk.h
 
 DPT_I2O SCSI RAID DRIVER
-P:      Adaptec OEM Raid Solutions
-M:      aacraid@adaptec.com
+M:      Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.adaptec.com/
 S:      Maintained
@@ -2004,8 +1738,7 @@ F:	drivers/scsi/dpt*
 F:      drivers/scsi/dpt/
 
 DRIVER CORE, KOBJECTS, AND SYSFS
-P:      Greg Kroah-Hartman
-M:      gregkh@suse.de
+M:      Greg Kroah-Hartman <gregkh@suse.de>
 T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:      Supported
 F:      Documentation/kobject.txt
@@ -2015,52 +1748,45 @@ F:	include/linux/kobj*
 F:      lib/kobj*
 
 DRM DRIVERS
-P:      David Airlie
-M:      airlied@linux.ie
+M:      David Airlie <airlied@linux.ie>
 L:      dri-devel@lists.sourceforge.net
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:      Maintained
 F:      drivers/gpu/drm/
 
 DSCC4 DRIVER
-P:      Francois Romieu
-M:      romieu@fr.zoreil.com
+M:      Francois Romieu <romieu@fr.zoreil.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/wan/dscc4.c
 
 DZ DECSTATION DZ11 SERIAL DRIVER
-P:      Maciej W. Rozycki
-M:      macro@linux-mips.org
+M:      "Maciej W. Rozycki" <macro@linux-mips.org>
 S:      Maintained
 F:      drivers/serial/dz.*
 
 EATA-DMA SCSI DRIVER
-P:      Michael Neuffer
-M:      mike@i-Connect.Net
+M:      Michael Neuffer <mike@i-Connect.Net>
 L:      linux-eata@i-connect.net
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/eata*
 
 EATA ISA/EISA/PCI SCSI DRIVER
-P:      Dario Ballabio
-M:      ballabio_dario@emc.com
+M:      Dario Ballabio <ballabio_dario@emc.com>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/eata.c
 
 EATA-PIO SCSI DRIVER
-P:      Michael Neuffer
-M:      mike@i-Connect.Net
+M:      Michael Neuffer <mike@i-Connect.Net>
 L:      linux-eata@i-connect.net
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/eata_pio.*
 
 EBTABLES
-P:      Bart De Schuymer
-M:      bart.de.schuymer@pandora.be
+M:      Bart De Schuymer <bart.de.schuymer@pandora.be>
 L:      ebtables-user@lists.sourceforge.net
 L:      ebtables-devel@lists.sourceforge.net
 W:      http://ebtables.sourceforge.net/
@@ -2069,10 +1795,8 @@ F:	include/linux/netfilter_bridge/ebt_*.h
 F:      net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
-P:      Tyler Hicks
-M:      tyhicks@linux.vnet.ibm.com
-P:      Dustin Kirkland
-M:      kirkland@canonical.com
+M:      Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M:      Dustin Kirkland <kirkland@canonical.com>
 L:      ecryptfs-devel@lists.launchpad.net
 W:      https://launchpad.net/ecryptfs
 S:      Supported
@@ -2080,8 +1804,7 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:      fs/ecryptfs/
 
 EDAC-CORE
-P:      Doug Thompson
-M:      dougthompson@xmission.com
+M:      Doug Thompson <dougthompson@xmission.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Supported
@@ -2090,94 +1813,80 @@ F:	drivers/edac/edac_*
 F:      include/linux/edac.h
 
 EDAC-AMD64
-P:      Doug Thompson
-M:      dougthompson@xmission.com
-P:      Borislav Petkov
-M:      borislav.petkov@amd.com
+M:      Doug Thompson <dougthompson@xmission.com>
+M:      Borislav Petkov <borislav.petkov@amd.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Supported
 F:      drivers/edac/amd64_edac*
 
 EDAC-E752X
-P:      Mark Gross
-M:      mark.gross@intel.com
-P:      Doug Thompson
-M:      dougthompson@xmission.com
+M:      Mark Gross <mark.gross@intel.com>
+M:      Doug Thompson <dougthompson@xmission.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-P:      Doug Thompson
-M:      dougthompson@xmission.com
+M:      Doug Thompson <dougthompson@xmission.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
-P:      Tim Small
-M:      tim@buttersideup.com
+M:      Tim Small <tim@buttersideup.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-P:      Jason Uhlenkott
-M:      juhlenko@akamai.com
+M:      Jason Uhlenkott <juhlenko@akamai.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/i3000_edac.c
 
 EDAC-I5000
-P:      Doug Thompson
-M:      dougthompson@xmission.com
+M:      Doug Thompson <dougthompson@xmission.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/i5000_edac.c
 
 EDAC-I5400
-P:      Mauro Carvalho Chehab
-M:      mchehab@redhat.com
+M:      Mauro Carvalho Chehab <mchehab@redhat.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/i5400_edac.c
 
 EDAC-I82975X
-P:      Ranganathan Desikan
-M:      ravi@jetztechnologies.com
-P:      Arvind R.
-M:      arvind@jetztechnologies.com
+M:      Ranganathan Desikan <ravi@jetztechnologies.com>
+M:      "Arvind R." <arvind@jetztechnologies.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
-P:      Egor Martovetsky
-M:      egor@pasemi.com
+M:      Egor Martovetsky <egor@pasemi.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/pasemi_edac.c
 
 EDAC-R82600
-P:      Tim Small
-M:      tim@buttersideup.com
+M:      Tim Small <tim@buttersideup.com>
 L:      bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      bluesmoke.sourceforge.net
 S:      Maintained
 F:      drivers/edac/r82600_edac.c
 
 EEEPC LAPTOP EXTRAS DRIVER
-P:      Corentin Chary
-M:      corentincj@iksaif.net
+M:      Corentin Chary <corentincj@iksaif.net>
 L:      acpi4asus-user@lists.sourceforge.net
 W:      http://acpi4asus.sf.net
 S:      Maintained
@@ -2189,66 +1898,54 @@ S:	Orphan
 F:      fs/efs/
 
 EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P:      Hoang-Nam Nguyen
-M:      hnguyen@de.ibm.com
-P:      Christoph Raisch
-M:      raisch@de.ibm.com
+M:      Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M:      Christoph Raisch <raisch@de.ibm.com>
 L:      general@lists.openfabrics.org
 S:      Supported
 F:      drivers/infiniband/hw/ehca/
 
 EMBEDDED LINUX
-P:      Paul Gortmaker
-M:      paul.gortmaker@windriver.com
-P:      Matt Mackall
-M:      mpm@selenic.com
-P:      David Woodhouse
-M:      dwmw2@infradead.org
+M:      Paul Gortmaker <paul.gortmaker@windriver.com>
+M:      Matt Mackall <mpm@selenic.com>
+M:      David Woodhouse <dwmw2@infradead.org>
 L:      linux-embedded@vger.kernel.org
 S:      Maintained
 
 EMULEX LPFC FC SCSI DRIVER
-P:      James Smart
-M:      james.smart@emulex.com
+M:      James Smart <james.smart@emulex.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://sourceforge.net/projects/lpfcxxxx
 S:      Supported
 F:      drivers/scsi/lpfc/
 
 ENE CB710 FLASH CARD READER DRIVER
-P:      Michał Mirosław
-M:      mirq-linux@rere.qmqm.pl
-L:      linux-kernel@vger.kernel.org
+M:      Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:      Maintained
 F:      drivers/misc/cb710/
 F:      drivers/mmc/host/cb710-mmc.*
 F:      include/linux/cb710.h
 
 EPSON 1355 FRAMEBUFFER DRIVER
-P:      Christopher Hoover
-M:      ch@murgatroid.com
-P:      Christopher Hoover
-M:      ch@hpl.hp.com
+M:      Christopher Hoover <ch@murgatroid.com>
+M:      Christopher Hoover <ch@hpl.hp.com>
 S:      Maintained
 F:      drivers/video/epson1355fb.c
 
 EPSON S1D13XXX FRAMEBUFFER DRIVER
-P:      Kristoffer Ericson
-M:      kristoffer.ericson@gmail.com
+M:      Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:      Maintained
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:      drivers/video/s1d13xxxfb.c
 F:      include/video/s1d13xxxfb.h
 
 ETHEREXPRESS-16 NETWORK DRIVER
-P:      Philip Blundell
-M:      philb@gnu.org
+M:      Philip Blundell <philb@gnu.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/eexpress.*
 
 ETHERNET BRIDGE
-P:      Stephen Hemminger
-M:      shemminger@linux-foundation.org
+M:      Stephen Hemminger <shemminger@linux-foundation.org>
 L:      bridge@lists.linux-foundation.org
 W:      http://www.linux-foundation.org/en/Net:Bridge
 S:      Maintained
@@ -2256,8 +1953,7 @@ F:	include/linux/netfilter_bridge/
 F:      net/bridge/
 
 ETHERTEAM 16I DRIVER
-P:      Mika Kuoppala
-M:      miku@iki.fi
+M:      Mika Kuoppala <miku@iki.fi>
 S:      Maintained
 F:      drivers/net/eth16i.c
 
@@ -2269,12 +1965,9 @@ F:	fs/ext2/
 F:      include/linux/ext2*
 
 EXT3 FILE SYSTEM
-P:      Stephen Tweedie
-M:      sct@redhat.com
-P:      Andrew Morton
-M:      akpm@linux-foundation.org
-P:      Andreas Dilger
-M:      adilger@sun.com
+M:      Stephen Tweedie <sct@redhat.com>
+M:      Andrew Morton <akpm@linux-foundation.org>
+M:      Andreas Dilger <adilger@sun.com>
 L:      linux-ext4@vger.kernel.org
 S:      Maintained
 F:      Documentation/filesystems/ext3.txt
@@ -2282,10 +1975,8 @@ F:	fs/ext3/
 F:      include/linux/ext3*
 
 EXT4 FILE SYSTEM
-P:      Theodore Ts'o
-M:      tytso@mit.edu
-P:      Andreas Dilger
-M:      adilger@sun.com
+M:      "Theodore Ts'o" <tytso@mit.edu>
+M:      Andreas Dilger <adilger@sun.com>
 L:      linux-ext4@vger.kernel.org
 W:      http://ext4.wiki.kernel.org
 S:      Maintained
@@ -2293,30 +1984,26 @@ F:	Documentation/filesystems/ext4.txt
 F:      fs/ext4/
 
 F71805F HARDWARE MONITORING DRIVER
-P:      Jean Delvare
-M:      khali@linux-fr.org
+M:      Jean Delvare <khali@linux-fr.org>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/f71805f
 F:      drivers/hwmon/f71805f.c
 
 FARSYNC SYNCHRONOUS DRIVER
-P:      Kevin Curtis
-M:      kevin.curtis@farsite.co.uk
+M:      Kevin Curtis <kevin.curtis@farsite.co.uk>
 W:      http://www.farsite.co.uk/
 S:      Supported
 F:      drivers/net/wan/farsync.*
 
 FAULT INJECTION SUPPORT
-P:      Akinobu Mita
-M:      akinobu.mita@gmail.com
+M:      Akinobu Mita <akinobu.mita@gmail.com>
 S:      Supported
 F:      Documentation/fault-injection/
 F:      lib/fault-inject.c
 
 FILE LOCKING (flock() and fcntl()/lockf())
-P:      Matthew Wilcox
-M:      matthew@wil.cx
+M:      Matthew Wilcox <matthew@wil.cx>
 L:      linux-fsdevel@vger.kernel.org
 S:      Maintained
 F:      include/linux/fcntl.h
@@ -2325,25 +2012,21 @@ F:	fs/fcntl.c
 F:      fs/locks.c
 
 FILESYSTEMS (VFS and infrastructure)
-P:      Alexander Viro
-M:      viro@zeniv.linux.org.uk
+M:      Alexander Viro <viro@zeniv.linux.org.uk>
 L:      linux-fsdevel@vger.kernel.org
 S:      Maintained
 F:      fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:      Riku Voipio
-M:      riku.vipio@iki.fi
+M:      Riku Voipio <riku.vipio@iki.fi>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/f75375s.c
 F:      include/linux/f75375s.h
 
 FIREWIRE SUBSYSTEM
-P:      Kristian Hoegsberg
-M:      krh@redhat.com
-P:      Stefan Richter
-M:      stefanr@s5r6.in-berlin.de
+M:      Kristian Hoegsberg <krh@redhat.com>
+M:      Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:      linux1394-devel@lists.sourceforge.net
 W:      http://www.linux1394.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2358,15 +2041,13 @@ F:	drivers/base/firmware*.c
 F:      include/linux/firmware.h
 
 FPU EMULATOR
-P:      Bill Metzenthen
-M:      billm@melbpc.org.au
+M:      Bill Metzenthen <billm@melbpc.org.au>
 W:      http://floatingpoint.sourceforge.net/emulator/index.html
 S:      Maintained
 F:      arch/x86/math-emu/
 
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P:      Mike McLagan
-M:      mike.mclagan@linux.org
+M:      Mike McLagan <mike.mclagan@linux.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/wan/dlci.c
@@ -2381,25 +2062,21 @@ F:	drivers/video/fb*
 F:      include/linux/fb.h
 
 FREESCALE DMA DRIVER
-P:      Li Yang
-M:      leoli@freescale.com
-P:      Zhang Wei
-M:      zw@zh-kernel.org
+M:      Li Yang <leoli@freescale.com>
+M:      Zhang Wei <zw@zh-kernel.org>
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 F:      drivers/dma/fsldma.*
 
 FREESCALE I2C CPM DRIVER
-P:      Jochen Friedrich
-M:      jochen@scram.de
+M:      Jochen Friedrich <jochen@scram.de>
 L:      linuxppc-dev@ozlabs.org
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P:      Sascha Hauer
-M:      kernel@pengutronix.de
+M:      Sascha Hauer <kernel@pengutronix.de>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
@@ -2407,10 +2084,8 @@ F:	arch/arm/plat-mxc/include/mach/imxfb.h
 F:      drivers/video/imxfb.c
 
 FREESCALE SOC FS_ENET DRIVER
-P:      Pantelis Antoniou
-M:      pantelis.antoniou@gmail.com
-P:      Vitaly Bordug
-M:      vbordug@ru.mvista.com
+M:      Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M:      Vitaly Bordug <vbordug@ru.mvista.com>
 L:      linuxppc-dev@ozlabs.org
 L:      netdev@vger.kernel.org
 S:      Maintained
@@ -2418,39 +2093,34 @@ F:	drivers/net/fs_enet/
 F:      include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-P:      Timur Tabi
-M:      timur@freescale.com
+M:      Timur Tabi <timur@freescale.com>
 L:      linuxppc-dev@ozlabs.org
 S:      Supported
 F:      arch/powerpc/sysdev/qe_lib/
 F:      arch/powerpc/include/asm/*qe.h
 
 FREESCALE HIGHSPEED USB DEVICE DRIVER
-P:      Li Yang
-M:      leoli@freescale.com
+M:      Li Yang <leoli@freescale.com>
 L:      linux-usb@vger.kernel.org
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 F:      drivers/usb/gadget/fsl_usb2_udc.c
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P:      Li Yang
-M:      leoli@freescale.com
+M:      Li Yang <leoli@freescale.com>
 L:      netdev@vger.kernel.org
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 F:      drivers/net/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-P:      Timur Tabi
-M:      timur@freescale.com
+M:      Timur Tabi <timur@freescale.com>
 L:      linuxppc-dev@ozlabs.org
 S:      Supported
 F:      drivers/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-P:      Timur Tabi
-M:      timur@freescale.com
+M:      Timur Tabi <timur@freescale.com>
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:      linuxppc-dev@ozlabs.org
 S:      Supported
@@ -2458,17 +2128,14 @@ F:	sound/soc/fsl/fsl*
 F:      sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
-P:      Christoph Hellwig
-M:      hch@infradead.org
+M:      Christoph Hellwig <hch@infradead.org>
 W:      ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:      Maintained
 F:      fs/freevxfs/
 
 FREEZER
-P:      Pavel Machek
-M:      pavel@ucw.cz
-P:      Rafael J. Wysocki
-M:      rjw@sisk.pl
+M:      Pavel Machek <pavel@ucw.cz>
+M:      "Rafael J. Wysocki" <rjw@sisk.pl>
 L:      linux-pm@lists.linux-foundation.org
 S:      Supported
 F:      Documentation/power/freezing-of-tasks.txt
@@ -2476,8 +2143,7 @@ F:	include/linux/freezer.h
 F:      kernel/freezer.c
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P:      David Howells
-M:      dhowells@redhat.com
+M:      David Howells <dhowells@redhat.com>
 L:      linux-cachefs@redhat.com
 S:      Supported
 F:      Documentation/filesystems/caching/
@@ -2485,8 +2151,7 @@ F:	fs/fscache/
 F:      include/linux/fscache*.h
 
 FTRACE
-P:      Steven Rostedt
-M:      rostedt@goodmis.org
+M:      Steven Rostedt <rostedt@goodmis.org>
 S:      Maintained
 F:      Documentation/trace/ftrace.txt
 F:      arch/*/*/*/ftrace.h
@@ -2495,21 +2160,18 @@ F:	include/*/ftrace.h
 F:      kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
-P:      David Howells
-M:      dhowells@redhat.com
+M:      David Howells <dhowells@redhat.com>
 S:      Maintained
 F:      arch/frv/
 
 FUJITSU LAPTOP EXTRAS
-P:      Jonathan Woithe
-M:      jwoithe@physics.adelaide.edu.au
+M:      Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 L:      linux-acpi@vger.kernel.org
 S:      Maintained
 F:      drivers/platform/x86/fujitsu-laptop.c
 
 FUSE: FILESYSTEM IN USERSPACE
-P:      Miklos Szeredi
-M:      miklos@szeredi.hu
+M:      Miklos Szeredi <miklos@szeredi.hu>
 L:      fuse-devel@lists.sourceforge.net
 W:      http://fuse.sourceforge.net/
 S:      Maintained
@@ -2517,30 +2179,26 @@ F:	fs/fuse/
 F:      include/linux/fuse.h
 
 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P:      Rik Faith
-M:      faith@cs.unc.edu
+M:      Rik Faith <faith@cs.unc.edu>
 L:      linux-scsi@vger.kernel.org
 S:      Odd Fixes (e.g., new signatures)
 F:      drivers/scsi/fdomain.*
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P:      Achim Leubner
-M:      achim_leubner@adaptec.com
+M:      Achim Leubner <achim_leubner@adaptec.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.icp-vortex.com/
 S:      Supported
 F:      drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-P:      Haavard Skinnemoen
-M:      hskinnemoen@atmel.com
+M:      Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:      Supported
 F:      drivers/i2c/busses/i2c-gpio.c
 F:      include/linux/i2c-gpio.h
 
 GENERIC HDLC (WAN) DRIVERS
-P:      Krzysztof Halasa
-M:      khc@pm.waw.pl
+M:      Krzysztof Halasa <khc@pm.waw.pl>
 W:      http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:      Maintained
 F:      drivers/net/wan/c101.c
@@ -2552,16 +2210,14 @@ F:	drivers/net/wan/pci200syn.c
 F:      drivers/net/wan/wanxl*
 
 GENERIC INCLUDE/ASM HEADER FILES
-P:      Arnd Bergmann
-M:      arnd@arndb.de
+M:      Arnd Bergmann <arnd@arndb.de>
 L:      linux-arch@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:      Maintained
 F:      include/asm-generic
 
 GFS2 FILE SYSTEM
-P:      Steven Whitehouse
-M:      swhiteho@redhat.com
+M:      Steven Whitehouse <swhiteho@redhat.com>
 L:      cluster-devel@redhat.com
 W:      http://sources.redhat.com/cluster/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@ -2572,10 +2228,8 @@ F:	fs/gfs2/
 F:      include/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-P:      Hansjoerg Lipp
-M:      hjlipp@web.de
-P:      Tilman Schmidt
-M:      tilman@imap.cc
+M:      Hansjoerg Lipp <hjlipp@web.de>
+M:      Tilman Schmidt <tilman@imap.cc>
 L:      gigaset307x-common@lists.sourceforge.net
 W:      http://gigaset307x.sourceforge.net/
 S:      Maintained
@@ -2584,8 +2238,7 @@ F:	drivers/isdn/gigaset/
 F:      include/linux/gigaset_dev.h
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:      Frank Seidel
-M:      frank@f-seidel.de
+M:      Frank Seidel <frank@f-seidel.de>
 L:      lm-sensors@lm-sensors.org
 W:      http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:      Maintained
@@ -2597,40 +2250,35 @@ S:	Odd Fixes
 F:      drivers/char/hvc_*
 
 GSPCA FINEPIX SUBDRIVER
-P:      Frank Zago
-M:      frank@zago.net
+M:      Frank Zago <frank@zago.net>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
 F:      drivers/media/video/gspca/finepix.c
 
 GSPCA M5602 SUBDRIVER
-P:      Erik Andren
-M:      erik.andren@gmail.com
+M:      Erik Andren <erik.andren@gmail.com>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
 F:      drivers/media/video/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
-P:      Hans de Goede
-M:      hdegoede@redhat.com
+M:      Hans de Goede <hdegoede@redhat.com>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
 F:      drivers/media/video/gspca/pac207.c
 
 GSPCA T613 SUBDRIVER
-P:      Leandro Costantino
-M:      lcostantino@gmail.com
+M:      Leandro Costantino <lcostantino@gmail.com>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
 F:      drivers/media/video/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
-P:      Jean-Francois Moine
-M:      moinejf@free.fr
+M:      Jean-Francois Moine <moinejf@free.fr>
 W:      http://moinejf.free.fr
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2650,31 +2298,27 @@ F:	drivers/char/hw_random/
 F:      include/linux/hw_random.h
 
 HARMONY SOUND DRIVER
-P:      Kyle McMartin
-M:      kyle@mcmartin.ca
+M:      Kyle McMartin <kyle@mcmartin.ca>
 L:      linux-parisc@vger.kernel.org
 S:      Maintained
 F:      sound/parisc/harmony.*
 
 HAYES ESP SERIAL DRIVER
-P:      Andrew J. Robinson
-M:      arobinso@nyx.net
+M:      "Andrew J. Robinson" <arobinso@nyx.net>
 W:      http://www.nyx.net/~arobinso
 S:      Maintained
 F:      Documentation/serial/hayes-esp.txt
 F:      drivers/char/esp.c
 
 HEWLETT-PACKARD SMART2 RAID DRIVER
-P:      Chirag Kantharia
-M:      chirag.kantharia@hp.com
+M:      Chirag Kantharia <chirag.kantharia@hp.com>
 L:      iss_storagedev@hp.com
 S:      Maintained
 F:      Documentation/blockdev/cpqarray.txt
 F:      drivers/block/cpqarray.*
 
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P:      Mike Miller
-M:      mike.miller@hp.com
+M:      Mike Miller <mike.miller@hp.com>
 L:      iss_storagedev@hp.com
 S:      Supported
 F:      Documentation/blockdev/cciss.txt
@@ -2682,25 +2326,21 @@ F:	drivers/block/cciss*
 F:      include/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
-P:      Roman Zippel
-M:      zippel@linux-m68k.org
+M:      Roman Zippel <zippel@linux-m68k.org>
 S:      Maintained
 F:      Documentation/filesystems/hfs.txt
 F:      fs/hfs/
 
 HGA FRAMEBUFFER DRIVER
-P:      Ferenc Bakonyi
-M:      fero@drama.obuda.kando.hu
+M:      Ferenc Bakonyi <fero@drama.obuda.kando.hu>
 L:      linux-nvidia@lists.surfsouth.com
 W:      http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:      Maintained
 F:      drivers/video/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
-P:      Pavel Machek
-M:      pavel@ucw.cz
-P:      Rafael J. Wysocki
-M:      rjw@sisk.pl
+M:      Pavel Machek <pavel@ucw.cz>
+M:      "Rafael J. Wysocki" <rjw@sisk.pl>
 L:      linux-pm@lists.linux-foundation.org
 S:      Supported
 F:      arch/x86/power/
@@ -2712,8 +2352,7 @@ F:	include/linux/pm.h
 F:      arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-P:      Jiri Kosina
-M:      jkosina@suse.cz
+M:      Jiri Kosina <jkosina@suse.cz>
 L:      linux-input@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:      Maintained
@@ -2721,16 +2360,14 @@ F:	drivers/hid/
 F:      include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P:      Thomas Gleixner
-M:      tglx@linutronix.de
+M:      Thomas Gleixner <tglx@linutronix.de>
 S:      Maintained
 F:      Documentation/timers/
 F:      kernel/hrtimer.c
 F:      include/linux/hrtimer.h
 
 HIGH-SPEED SCC DRIVER FOR AX.25
-P:      Klaus Kudielka
-M:      klaus.kudielka@ieee.org
+M:      Klaus Kudielka <klaus.kudielka@ieee.org>
 L:      linux-hams@vger.kernel.org
 W:      http://www.nt.tuwien.ac.at/~kkudielk/Linux/
 S:      Maintained
@@ -2738,16 +2375,14 @@ F:	drivers/net/hamradio/dmascc.c
 F:      drivers/net/hamradio/scc.c
 
 HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P:      HighPoint Linux Team
-M:      linux@highpoint-tech.com
+M:      HighPoint Linux Team <linux@highpoint-tech.com>
 W:      http://www.highpoint-tech.com
 S:      Supported
 F:      Documentation/scsi/hptiop.txt
 F:      drivers/scsi/hptiop.c
 
 HIPPI
-P:      Jes Sorensen
-M:      jes@trained-monkey.org
+M:      Jes Sorensen <jes@trained-monkey.org>
 L:      linux-hippi@sunsite.dk
 S:      Maintained
 F:      include/linux/hippidevice.h
@@ -2755,8 +2390,7 @@ F:	include/linux/if_hippi.h
 F:      net/802/hippi.c
 
 HOST AP DRIVER
-P:      Jouni Malinen
-M:      j@w1.fi
+M:      Jouni Malinen <j@w1.fi>
 L:      hostap@shmoo.com (subscribers-only)
 L:      linux-wireless@vger.kernel.org
 W:      http://hostap.epitest.fi/
@@ -2764,82 +2398,69 @@ S:	Maintained
 F:      drivers/net/wireless/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
+M:      Carlos Corbacho <carlos@strangeworlds.co.uk>
 S:      Odd Fixes
 F:      drivers/platform/x86/tc1100-wmi.c
 
 HP100:  Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P:      Jaroslav Kysela
-M:      perex@perex.cz
+M:      Jaroslav Kysela <perex@perex.cz>
 S:      Maintained
 F:      drivers/net/hp100.*
 
 HPET:   High Precision Event Timers driver
-P:      Clemens Ladisch
-M:      clemens@ladisch.de
+M:      Clemens Ladisch <clemens@ladisch.de>
 S:      Maintained
 F:      Documentation/timers/hpet.txt
 F:      drivers/char/hpet.c
 F:      include/linux/hpet.h
 
 HPET:   i386
-P:      Venkatesh Pallipadi (Venki)
-M:      venkatesh.pallipadi@intel.com
+M:      "Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
 S:      Maintained
 F:      arch/x86/kernel/hpet.c
 F:      arch/x86/include/asm/hpet.h
 
 HPET:   x86_64
-P:      Vojtech Pavlik
-M:      vojtech@suse.cz
+M:      Vojtech Pavlik <vojtech@suse.cz>
 S:      Maintained
 
 HPET:   ACPI
-P:      Bob Picco
-M:      bob.picco@hp.com
+M:      Bob Picco <bob.picco@hp.com>
 S:      Maintained
 F:      drivers/char/hpet.c
 
 HPFS FILESYSTEM
-P:      Mikulas Patocka
-M:      mikulas@artax.karlin.mff.cuni.cz
+M:      Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:      http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:      Maintained
 F:      fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:      Jan Dumon
-M:      j.dumon@option.com
+M:      Jan Dumon <j.dumon@option.com>
 W:      http://www.pharscape.org
 S:      Maintained
 F:      drivers/net/usb/hso.c
 
 HTCPEN TOUCHSCREEN DRIVER
-P:      Pau Oliva Fora
-M:      pof@eslack.org
+M:      Pau Oliva Fora <pof@eslack.org>
 L:      linux-input@vger.kernel.org
 S:      Maintained
 F:      drivers/input/touchscreen/htcpen.c
 
 HUGETLB FILESYSTEM
-P:      William Irwin
-M:      wli@holomorphy.com
+M:      William Irwin <wli@holomorphy.com>
 S:      Maintained
 F:      fs/hugetlbfs/
 
 I2C/SMBUS STUB DRIVER
-P:      Mark M. Hoffman
-M:      mhoffman@lightlink.com
+M:      "Mark M. Hoffman" <mhoffman@lightlink.com>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-P:      Jean Delvare (PC drivers, core)
-M:      khali@linux-fr.org
-P:      Ben Dooks (embedded platforms)
-M:      ben-linux@fluff.org
+M:      "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:      "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:      linux-i2c@vger.kernel.org
 W:      http://i2c.wiki.kernel.org/
 T:      quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -2851,30 +2472,25 @@ F:	include/linux/i2c-dev.h
 F:      include/linux/i2c-id.h
 
 I2C-TINY-USB DRIVER
-P:      Till Harbaum
-M:      till@harbaum.org
+M:      Till Harbaum <till@harbaum.org>
 L:      linux-i2c@vger.kernel.org
 W:      http://www.harbaum.org/till/i2c_tiny_usb
 S:      Maintained
 F:      drivers/i2c/busses/i2c-tiny-usb.c
 
 i386 BOOT CODE
-P:      H. Peter Anvin
-M:      hpa@zytor.com
+M:      "H. Peter Anvin" <hpa@zytor.com>
 S:      Maintained
 F:      arch/x86/boot/
 
 i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P:      H. Peter Anvin
-M:      hpa@zytor.com
+M:      "H. Peter Anvin" <hpa@zytor.com>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
 S:      Maintained
 
 IA64 (Itanium) PLATFORM
-P:      Tony Luck
-P:      Fenghua Yu
-M:      tony.luck@intel.com
-M:      fenghua.yu@intel.com
+M:      Tony Luck <tony.luck@intel.com>
+M:      Fenghua Yu <fenghua.yu@intel.com>
 L:      linux-ia64@vger.kernel.org
 W:      http://www.ia64-linux.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2882,29 +2498,25 @@ S:	Maintained
 F:      arch/ia64/
 
 IBM MCA SCSI SUBSYSTEM DRIVER
-P:      Michael Lang
-M:      langa2@kph.uni-mainz.de
+M:      Michael Lang <langa2@kph.uni-mainz.de>
 W:      http://www.uni-mainz.de/~langm000/linux.html
 S:      Maintained
 F:      drivers/scsi/ibmmca.c
 
 IBM Power Linux RAID adapter
-P:      Brian King
-M:      brking@us.ibm.com
+M:      Brian King <brking@us.ibm.com>
 S:      Supported
 F:      drivers/scsi/ipr.*
 
 IBM ServeRAID RAID DRIVER
 P:      Jack Hammer
-P:      Dave Jeffery
-M:      ipslinux@adaptec.com
+M:      Dave Jeffery <ipslinux@adaptec.com>
 W:      http://www.developer.ibm.com/welcome/netfinity/serveraid.html
 S:      Supported
 F:      drivers/scsi/ips.*
 
 IDE SUBSYSTEM
-P:      David S. Miller
-M:      davem@davemloft.net
+M:      "David S. Miller" <davem@davemloft.net>
 L:      linux-ide@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
 S:      Maintained
@@ -2913,25 +2525,21 @@ F:	drivers/ide/
 F:      include/linux/ide.h
 
 IDE/ATAPI DRIVERS
-P:      Borislav Petkov
-M:      petkovbb@gmail.com
+M:      Borislav Petkov <petkovbb@gmail.com>
 L:      linux-ide@vger.kernel.org
 S:      Maintained
 F:      Documentation/cdrom/ide-cd
 F:      drivers/ide/ide-cd*
 
 IDLE-I7300
-P:      Andy Henroid
-M:      andrew.d.henroid@intel.com
+M:      Andy Henroid <andrew.d.henroid@intel.com>
 L:      linux-pm@lists.linux-foundation.org
 S:      Supported
 F:      drivers/idle/i7300_idle.c
 
 IEEE 1394 SUBSYSTEM
-P:      Ben Collins
-M:      ben.collins@ubuntu.com
-P:      Stefan Richter
-M:      stefanr@s5r6.in-berlin.de
+M:      Ben Collins <ben.collins@ubuntu.com>
+M:      Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:      linux1394-devel@lists.sourceforge.net
 W:      http://www.linux1394.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2939,19 +2547,15 @@ S:	Maintained
 F:      drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
-P:      Dan Dennedy
-M:      dan@dennedy.org
-P:      Stefan Richter
-M:      stefanr@s5r6.in-berlin.de
+M:      Dan Dennedy <dan@dennedy.org>
+M:      Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:      linux1394-devel@lists.sourceforge.net
 S:      Maintained
 F:      drivers/ieee1394/raw1394*
 
 IEEE 802.15.4 SUBSYSTEM
-P:      Dmitry Eremin-Solenikov
-M:      dbaryshkov@gmail.com
-P:      Sergey Lapin
-M:      slapin@ossfans.org
+M:      Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:      Sergey Lapin <slapin@ossfans.org>
 L:      linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      http://apps.sourceforge.net/trac/linux-zigbee
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
@@ -2960,8 +2564,7 @@ F:	net/ieee802154/
 F:      drivers/ieee802154/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P:      Mimi Zohar
-M:      zohar@us.ibm.com
+M:      Mimi Zohar <zohar@us.ibm.com>
 S:      Supported
 F:      security/integrity/ima/
 
@@ -2971,12 +2574,9 @@ S:	Orphan
 F:      drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-P:      Roland Dreier
-M:      rolandd@cisco.com
-P:      Sean Hefty
-M:      sean.hefty@intel.com
-P:      Hal Rosenstock
-M:      hal.rosenstock@gmail.com
+M:      Roland Dreier <rolandd@cisco.com>
+M:      Sean Hefty <sean.hefty@intel.com>
+M:      Hal Rosenstock <hal.rosenstock@gmail.com>
 L:      general@lists.openfabrics.org (moderated for non-subscribers)
 W:      http://www.openib.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2986,65 +2586,55 @@ F:	drivers/infiniband/
 F:      include/linux/if_infiniband.h
 
 INOTIFY
-P:      John McCutchan
-M:      john@johnmccutchan.com
-P:      Robert Love
-M:      rlove@rlove.org
-P:      Eric Paris
-M:      eparis@parisplace.org
+M:      John McCutchan <john@johnmccutchan.com>
+M:      Robert Love <rlove@rlove.org>
+M:      Eric Paris <eparis@parisplace.org>
 S:      Maintained
 F:      Documentation/filesystems/inotify.txt
 F:      fs/notify/inotify/
 F:      include/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P:      Dmitry Torokhov
-M:      dmitry.torokhov@gmail.com
-M:      dtor@mail.ru
+M:      Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M:      Dmitry Torokhov <dtor@mail.ru>
 L:      linux-input@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:      Maintained
 F:      drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P:      Sylvain Meyer
-M:      sylvain.meyer@worldonline.fr
+M:      Sylvain Meyer <sylvain.meyer@worldonline.fr>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      Documentation/fb/intelfb.txt
 F:      drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
-P:      Antonino Daplas
-M:      adaplas@gmail.com
+M:      Antonino Daplas <adaplas@gmail.com>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/i810/
 
 INTEL MENLOW THERMAL DRIVER
-P:      Sujith Thomas
-M:      sujith.thomas@intel.com
+M:      Sujith Thomas <sujith.thomas@intel.com>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.lesswatts.org/projects/acpi/
 S:      Supported
 F:      drivers/platform/x86/intel_menlow.c
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
-P:      Tigran Aivazian
-M:      tigran@aivazian.fsnet.co.uk
+M:      Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
 S:      Maintained
 F:      arch/x86/kernel/microcode_core.c
 F:      arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-P:      Maciej Sosnowski
-M:      maciej.sosnowski@intel.com
+M:      Maciej Sosnowski <maciej.sosnowski@intel.com>
 S:      Supported
 F:      drivers/dma/ioat*
 
 INTEL IOMMU (VT-d)
-P:      David Woodhouse
-M:      dwmw2@infradead.org
+M:      David Woodhouse <dwmw2@infradead.org>
 L:      iommu@lists.linux-foundation.org
 T:      git git://git.infradead.org/iommu-2.6.git
 S:      Supported
@@ -3052,14 +2642,12 @@ F:	drivers/pci/intel-iommu.c
 F:      include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
-P:      Dan Williams
-M:      dan.j.williams@intel.com
+M:      Dan Williams <dan.j.williams@intel.com>
 S:      Supported
 F:      drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P:      Krzysztof Halasa
-M:      khc@pm.waw.pl
+M:      Krzysztof Halasa <khc@pm.waw.pl>
 S:      Maintained
 F:      arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:      arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -3069,29 +2657,22 @@ F:	drivers/net/arm/ixp4xx_eth.c
 F:      drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P:      Deepak Saxena
-M:      dsaxena@plexity.net
+M:      Deepak Saxena <dsaxena@plexity.net>
 S:      Maintained
 F:      drivers/char/hw_random/ixp4xx-rng.c
 
 INTEL IXP2000 ETHERNET DRIVER
-P:      Lennert Buytenhek
-M:      kernel@wantstofly.org
+M:      Lennert Buytenhek <kernel@wantstofly.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:      Jeff Kirsher
-M:      jeffrey.t.kirsher@intel.com
-P:      Jesse Brandeburg
-M:      jesse.brandeburg@intel.com
-P:      Bruce Allan
-M:      bruce.w.allan@intel.com
-P:      PJ Waskiewicz
-M:      peter.p.waskiewicz.jr@intel.com
-P:      John Ronciak
-M:      john.ronciak@intel.com
+M:      Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M:      Jesse Brandeburg <jesse.brandeburg@intel.com>
+M:      Bruce Allan <bruce.w.allan@intel.com>
+M:      PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:      John Ronciak <john.ronciak@intel.com>
 L:      e1000-devel@lists.sourceforge.net
 W:      http://e1000.sourceforge.net/
 S:      Supported
@@ -3103,12 +2684,9 @@ F:	drivers/net/ixgb/
 F:      drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P:      Zhu Yi
-M:      yi.zhu@intel.com
-P:      James Ketrenos
-M:      jketreno@linux.intel.com
-P:      Reinette Chatre
-M:      reinette.chatre@intel.com
+M:      Zhu Yi <yi.zhu@intel.com>
+M:      James Ketrenos <jketreno@linux.intel.com>
+M:      Reinette Chatre <reinette.chatre@intel.com>
 L:      linux-wireless@vger.kernel.org
 L:      ipw2100-devel@lists.sourceforge.net
 W:      http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3118,12 +2696,9 @@ F:	Documentation/networking/README.ipw2100
 F:      drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P:      Zhu Yi
-M:      yi.zhu@intel.com
-P:      James Ketrenos
-M:      jketreno@linux.intel.com
-P:      Reinette Chatre
-M:      reinette.chatre@intel.com
+M:      Zhu Yi <yi.zhu@intel.com>
+M:      James Ketrenos <jketreno@linux.intel.com>
+M:      Reinette Chatre <reinette.chatre@intel.com>
 L:      linux-wireless@vger.kernel.org
 L:      ipw2100-devel@lists.sourceforge.net
 W:      http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3133,8 +2708,7 @@ F:	Documentation/networking/README.ipw2200
 F:      drivers/net/wireless/ipw2x00/ipw2200.*
 
 INTEL WIRELESS WIMAX CONNECTION 2400
-P:      Inaky Perez-Gonzalez
-M:      inaky.perez-gonzalez@intel.com
+M:      Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:      linux-wimax@intel.com
 L:      wimax@linuxwimax.org
 S:      Supported
@@ -3144,10 +2718,8 @@ F:	drivers/net/wimax/i2400m/
 F:      include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-P:      Zhu Yi
-M:      yi.zhu@intel.com
-P:      Reinette Chatre
-M:      reinette.chatre@intel.com
+M:      Zhu Yi <yi.zhu@intel.com>
+M:      Reinette Chatre <reinette.chatre@intel.com>
 L:      linux-wireless@vger.kernel.org
 L:      ipw3945-devel@lists.sourceforge.net
 W:      http://intellinuxwireless.org
@@ -3156,47 +2728,39 @@ S:	Supported
 F:      drivers/net/wireless/iwlwifi/
 
 IOC3 ETHERNET DRIVER
-P:      Ralf Baechle
-M:      ralf@linux-mips.org
+M:      Ralf Baechle <ralf@linux-mips.org>
 L:      linux-mips@linux-mips.org
 S:      Maintained
 F:      drivers/net/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
-P:      Pat Gefre
-M:      pfg@sgi.com
+M:      Pat Gefre <pfg@sgi.com>
 L:      linux-mips@linux-mips.org
 S:      Maintained
 F:      drivers/serial/ioc3_serial.c
 
 IP MASQUERADING
-P:      Juanjo Ciarlante
-M:      jjciarla@raiz.uncu.edu.ar
+M:      Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:      Maintained
 F:      net/ipv4/netfilter/ipt_MASQUERADE.c
 
 IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P:      Francois Romieu
-M:      romieu@fr.zoreil.com
-P:      Sorbica Shieh
-M:      sorbica@icplus.com.tw
-P:      Jesse Huang
-M:      jesse@icplus.com.tw
+M:      Francois Romieu <romieu@fr.zoreil.com>
+M:      Sorbica Shieh <sorbica@icplus.com.tw>
+M:      Jesse Huang <jesse@icplus.com.tw>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/ipg.c
 
 IPATH DRIVER
-P:      Ralph Campbell
-M:      infinipath@qlogic.com
+M:      Ralph Campbell <infinipath@qlogic.com>
 L:      general@lists.openfabrics.org
 T:      git git://git.qlogic.com/ipath-linux-2.6
 S:      Supported
 F:      drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
-P:      Corey Minyard
-M:      minyard@acm.org
+M:      Corey Minyard <minyard@acm.org>
 L:      openipmi-developer@lists.sourceforge.net
 W:      http://openipmi.sourceforge.net/
 S:      Supported
@@ -3205,20 +2769,16 @@ F:	drivers/char/ipmi/
 F:      include/linux/ipmi*
 
 IPS SCSI RAID DRIVER
-P:      Adaptec OEM Raid Solutions
-M:      aacraid@adaptec.com
+M:      Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.adaptec.com/
 S:      Maintained
 F:      drivers/scsi/ips*
 
 IPVS
-P:      Wensong Zhang
-M:      wensong@linux-vs.org
-P:      Simon Horman
-M:      horms@verge.net.au
-P:      Julian Anastasov
-M:      ja@ssi.bg
+M:      Wensong Zhang <wensong@linux-vs.org>
+M:      Simon Horman <horms@verge.net.au>
+M:      Julian Anastasov <ja@ssi.bg>
 L:      netdev@vger.kernel.org
 L:      lvs-devel@vger.kernel.org
 S:      Maintained
@@ -3226,17 +2786,14 @@ F:	Documentation/networking/ipvs-sysctl.txt
 F:      net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-P:      Jiri Kosina
-M:      jkosina@suse.cz
-P:      David Sterba
-M:      dsterba@suse.cz
+M:      Jiri Kosina <jkosina@suse.cz>
+M:      David Sterba <dsterba@suse.cz>
 S:      Maintained
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
 F:      drivers/char/pcmcia/ipwireless/
 
 IPX NETWORK LAYER
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      include/linux/ipx.h
@@ -3244,8 +2801,7 @@ F:	include/net/ipx.h
 F:      net/ipx/
 
 IRDA SUBSYSTEM
-P:      Samuel Ortiz
-M:      samuel@sortiz.org
+M:      Samuel Ortiz <samuel@sortiz.org>
 L:      irda-users@lists.sourceforge.net (subscribers-only)
 W:      http://irda.sourceforge.net/
 S:      Maintained
@@ -3256,16 +2812,14 @@ F:	include/net/irda/
 F:      net/irda/
 
 ISAPNP
-P:      Jaroslav Kysela
-M:      perex@perex.cz
+M:      Jaroslav Kysela <perex@perex.cz>
 S:      Maintained
 F:      Documentation/isapnp.txt
 F:      drivers/pnp/isapnp/
 F:      include/linux/isapnp.h
 
 ISCSI
-P:      Mike Christie
-M:      michaelc@cs.wisc.edu
+M:      Mike Christie <michaelc@cs.wisc.edu>
 L:      open-iscsi@googlegroups.com
 W:      www.open-iscsi.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
@@ -3274,8 +2828,7 @@ F:	drivers/scsi/*iscsi*
 F:      include/scsi/*iscsi*
 
 ISDN SUBSYSTEM
-P:      Karsten Keil
-M:      isdn@linux-pingi.de
+M:      Karsten Keil <isdn@linux-pingi.de>
 L:      isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:      http://www.isdn4linux.de
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
@@ -3286,18 +2839,15 @@ F:	include/linux/isdn.h
 F:      include/linux/isdn/
 
 ISDN SUBSYSTEM (Eicon active card driver)
-P:      Armin Schindler
-M:      mac@melware.de
+M:      Armin Schindler <mac@melware.de>
 L:      isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:      http://www.melware.de
 S:      Maintained
 F:      drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-P:      Hans Verkuil
-M:      hverkuil@xs4all.nl
+M:      Hans Verkuil <hverkuil@xs4all.nl>
 L:      ivtv-devel@ivtvdriver.org
-L:      ivtv-users@ivtvdriver.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:      http://www.ivtvdriver.org
@@ -3307,25 +2857,22 @@ F:	drivers/media/video/ivtv/
 F:      include/linux/ivtv*
 
 JFS FILESYSTEM
-P:      Dave Kleikamp
-M:      shaggy@austin.ibm.com
+M:      Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:      jfs-discussion@lists.sourceforge.net
 W:      http://jfs.sourceforge.net/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
-S:      Supported
+S:      Maintained
 F:      Documentation/filesystems/jfs.txt
 F:      fs/jfs/
 
 JME NETWORK DRIVER
-P:      Guo-Fu Tseng
-M:      cooldavid@cooldavid.org
+M:      Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P:      David Woodhouse
-M:      dwmw2@infradead.org
+M:      David Woodhouse <dwmw2@infradead.org>
 L:      linux-mtd@lists.infradead.org
 W:      http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:      Maintained
@@ -3333,10 +2880,8 @@ F:	fs/jffs2/
 F:      include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P:      Stephen Tweedie
-M:      sct@redhat.com
-P:      Andrew Morton
-M:      akpm@linux-foundation.org
+M:      Stephen Tweedie <sct@redhat.com>
+M:      Andrew Morton <akpm@linux-foundation.org>
 L:      linux-ext4@vger.kernel.org
 S:      Maintained
 F:      fs/jbd*/
@@ -3344,48 +2889,41 @@ F:	include/linux/ext*jbd*.h
 F:      include/linux/jbd*.h
 
 K8TEMP HARDWARE MONITORING DRIVER
-P:      Rudolf Marek
-M:      r.marek@assembler.cz
+M:      Rudolf Marek <r.marek@assembler.cz>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/k8temp
 F:      drivers/hwmon/k8temp.c
 
 KCONFIG
-P:      Roman Zippel
-M:      zippel@linux-m68k.org
+M:      Roman Zippel <zippel@linux-m68k.org>
 L:      linux-kbuild@vger.kernel.org
 S:      Maintained
 F:      Documentation/kbuild/kconfig-language.txt
 F:      scripts/kconfig/
 
 KDUMP
-P:      Vivek Goyal
-M:      vgoyal@redhat.com
-P:      Haren Myneni
-M:      hbabu@us.ibm.com
+M:      Vivek Goyal <vgoyal@redhat.com>
+M:      Haren Myneni <hbabu@us.ibm.com>
 L:      kexec@lists.infradead.org
 W:      http://lse.sourceforge.net/kdump/
 S:      Maintained
 F:      Documentation/kdump/
 
 KERNEL AUTOMOUNTER (AUTOFS)
-P:      H. Peter Anvin
-M:      hpa@zytor.com
+M:      "H. Peter Anvin" <hpa@zytor.com>
 L:      autofs@linux.kernel.org
 S:      Odd Fixes
 F:      fs/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P:      Ian Kent
-M:      raven@themaw.net
+M:      Ian Kent <raven@themaw.net>
 L:      autofs@linux.kernel.org
 S:      Maintained
 F:      fs/autofs4/
 
 KERNEL BUILD
-P:      Sam Ravnborg
-M:      sam@ravnborg.org
+M:      Sam Ravnborg <sam@ravnborg.org>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:      linux-kbuild@vger.kernel.org
@@ -3395,16 +2933,13 @@ F:	Makefile
 F:      scripts/Makefile.*
 
 KERNEL JANITORS
-P:      Several
 L:      kernel-janitors@vger.kernel.org
 W:      http://www.kerneljanitors.org/
-S:      Maintained
+S:      Odd fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P:      J. Bruce Fields
-M:      bfields@fieldses.org
-P:      Neil Brown
-M:      neilb@suse.de
+M:      "J. Bruce Fields" <bfields@fieldses.org>
+M:      Neil Brown <neilb@suse.de>
 L:      linux-nfs@vger.kernel.org
 W:      http://nfs.sourceforge.net/
 S:      Supported
@@ -3417,8 +2952,7 @@ F:	include/linux/lockd/
 F:      include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-P:      Avi Kivity
-M:      avi@redhat.com
+M:      Avi Kivity <avi@redhat.com>
 L:      kvm@vger.kernel.org
 W:      http://kvm.qumranet.com
 S:      Supported
@@ -3429,8 +2963,7 @@ F:	include/linux/kvm*
 F:      virt/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P:      Joerg Roedel
-M:      joerg.roedel@amd.com
+M:      Joerg Roedel <joerg.roedel@amd.com>
 L:      kvm@vger.kernel.org
 W:      http://kvm.qumranet.com
 S:      Supported
@@ -3439,8 +2972,7 @@ F:	arch/x86/kvm/kvm_svm.h
 F:      arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P:      Hollis Blanchard
-M:      hollisb@us.ibm.com
+M:      Hollis Blanchard <hollisb@us.ibm.com>
 L:      kvm-ppc@vger.kernel.org
 W:      http://kvm.qumranet.com
 S:      Supported
@@ -3448,8 +2980,7 @@ F:	arch/powerpc/include/asm/kvm*
 F:      arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P:      Xiantao Zhang
-M:      xiantao.zhang@intel.com
+M:      Xiantao Zhang <xiantao.zhang@intel.com>
 L:      kvm-ia64@vger.kernel.org
 W:      http://kvm.qumranet.com
 S:      Supported
@@ -3458,10 +2989,8 @@ F:	arch/ia64/include/asm/kvm*
 F:      arch/ia64/kvm/
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P:      Carsten Otte
-M:      cotte@de.ibm.com
-P:      Christian Borntraeger
-M:      borntraeger@de.ibm.com
+M:      Carsten Otte <cotte@de.ibm.com>
+M:      Christian Borntraeger <borntraeger@de.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 W:      http://www.ibm.com/developerworks/linux/linux390/
@@ -3471,8 +3000,7 @@ F:	arch/s390/include/asm/kvm*
 F:      arch/s390/kvm/
 
 KEXEC
-P:      Eric Biederman
-M:      ebiederm@xmission.com
+M:      Eric Biederman <ebiederm@xmission.com>
 W:      http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
 L:      kexec@lists.infradead.org
 S:      Maintained
@@ -3480,8 +3008,7 @@ F:	include/linux/kexec.h
 F:      kernel/kexec.c
 
 KGDB
-P:      Jason Wessel
-M:      jason.wessel@windriver.com
+M:      Jason Wessel <jason.wessel@windriver.com>
 L:      kgdb-bugreport@lists.sourceforge.net
 S:      Maintained
 F:      Documentation/DocBook/kgdb.tmpl
@@ -3491,17 +3018,13 @@ F:	include/linux/kgdb.h
 F:      kernel/kgdb.c
 
 KMEMCHECK
-P:      Vegard Nossum
-M:      vegardno@ifi.uio.no
+M:      Vegard Nossum <vegardno@ifi.uio.no>
 P       Pekka Enberg
 M:      penberg@cs.helsinki.fi
-L:      linux-kernel@vger.kernel.org
 S:      Maintained
 
 KMEMLEAK
-P:      Catalin Marinas
-M:      catalin.marinas@arm.com
-L:      linux-kernel@vger.kernel.org
+M:      Catalin Marinas <catalin.marinas@arm.com>
 S:      Maintained
 F:      Documentation/kmemleak.txt
 F:      include/linux/kmemleak.h
@@ -3509,30 +3032,24 @@ F:	mm/kmemleak.c
 F:      mm/kmemleak-test.c
 
 KMEMTRACE
-P:      Eduard - Gabriel Munteanu
-M:      eduard.munteanu@linux360.ro
+M:      Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
 S:      Maintained
 F:      Documentation/trace/kmemtrace.txt
 F:      include/linux/kmemtrace.h
 F:      kernel/trace/kmemtrace.c
 
 KPROBES
-P:      Ananth N Mavinakayanahalli
-M:      ananth@in.ibm.com
-P:      Anil S Keshavamurthy
-M:      anil.s.keshavamurthy@intel.com
-P:      David S. Miller
-M:      davem@davemloft.net
-P:      Masami Hiramatsu
-M:      mhiramat@redhat.com
+M:      Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M:      Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M:      "David S. Miller" <davem@davemloft.net>
+M:      Masami Hiramatsu <mhiramat@redhat.com>
 S:      Maintained
 F:      Documentation/kprobes.txt
 F:      include/linux/kprobes.h
 F:      kernel/kprobes.c
 
 KS0108 LCD CONTROLLER DRIVER
-P:      Miguel Ojeda Sandonis
-M:      miguel.ojeda.sandonis@gmail.com
+M:      Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:      http://miguelojeda.es/auxdisplay.htm
 W:      http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:      Maintained
@@ -3548,31 +3065,27 @@ F:	include/*/lapb.h
 F:      net/lapb/
 
 LASI 53c700 driver for PARISC
-P:      James E.J. Bottomley
-M:      James.Bottomley@HansenPartnership.com
+M:      "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      Documentation/scsi/53c700.txt
 F:      drivers/scsi/53c700*
 
 LED SUBSYSTEM
-P:      Richard Purdie
-M:      rpurdie@rpsys.net
+M:      Richard Purdie <rpurdie@rpsys.net>
 S:      Maintained
 F:      drivers/leds/
 F:      include/linux/leds.h
 
 LEGO USB Tower driver
-P:      Juergen Stuber
-M:      starblue@users.sourceforge.net
+M:      Juergen Stuber <starblue@users.sourceforge.net>
 L:      legousb-devel@lists.sourceforge.net
 W:      http://legousb.sourceforge.net/
 S:      Maintained
 F:      drivers/usb/misc/legousbtower.c
 
 LGUEST
-P:      Rusty Russell
-M:      rusty@rustcorp.com.au
+M:      Rusty Russell <rusty@rustcorp.com.au>
 L:      lguest@ozlabs.org
 W:      http://lguest.ozlabs.org/
 S:      Maintained
@@ -3583,119 +3096,100 @@ F:	include/linux/lguest*.h
 F:      arch/x86/include/asm/lguest*.h
 
 LINUX FOR IBM pSERIES (RS/6000)
-P:      Paul Mackerras
-M:      paulus@au.ibm.com
+M:      Paul Mackerras <paulus@au.ibm.com>
 W:      http://www.ibm.com/linux/ltc/projects/ppc
 S:      Supported
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P:      Benjamin Herrenschmidt
-M:      benh@kernel.crashing.org
-P:      Paul Mackerras
-M:      paulus@samba.org
+M:      Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:      Paul Mackerras <paulus@samba.org>
 W:      http://www.penguinppc.org/
 L:      linuxppc-dev@ozlabs.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
 S:      Supported
 
 LINUX FOR POWER MACINTOSH
-P:      Benjamin Herrenschmidt
-M:      benh@kernel.crashing.org
+M:      Benjamin Herrenschmidt <benh@kernel.crashing.org>
 W:      http://www.penguinppc.org/
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:      Grant Likely
-M:      grant.likely@secretlab.ca
+M:      Grant Likely <grant.likely@secretlab.ca>
 L:      linuxppc-dev@ozlabs.org
 T:      git git://git.secretlab.ca/git/linux-2.6.git
 S:      Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
-P:      Josh Boyer
-M:      jwboyer@linux.vnet.ibm.com
-P:      Matt Porter
-M:      mporter@kernel.crashing.org
+M:      Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M:      Matt Porter <mporter@kernel.crashing.org>
 W:      http://www.penguinppc.org/
 L:      linuxppc-dev@ozlabs.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:      Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P:      Grant Likely
-M:      grant.likely@secretlab.ca
+M:      Grant Likely <grant.likely@secretlab.ca>
 W:      http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:      linuxppc-dev@ozlabs.org
 T:      git git://git.secretlab.ca/git/linux-2.6.git
 S:      Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-P:      Vitaly Bordug
-M:      vitb@kernel.crashing.org
-P:      Marcelo Tosatti
-M:      marcelo@kvack.org
+M:      Vitaly Bordug <vitb@kernel.crashing.org>
+M:      Marcelo Tosatti <marcelo@kvack.org>
 W:      http://www.penguinppc.org/
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P:      Kumar Gala
-M:      galak@kernel.crashing.org
+M:      Kumar Gala <galak@kernel.crashing.org>
 W:      http://www.penguinppc.org/
 L:      linuxppc-dev@ozlabs.org
 S:      Maintained
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
-P:      Olof Johansson
-M:      olof@lixom.net
+M:      Olof Johansson <olof@lixom.net>
 W:      http://www.pasemi.com/
 L:      linuxppc-dev@ozlabs.org
 S:      Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
-P:      Chris Wright
-M:      chrisw@sous-sol.org
+M:      Chris Wright <chrisw@sous-sol.org>
 L:      linux-security-module@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:      Supported
 
 LLC (802.2)
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:      Maintained
 F:      include/linux/llc.h
 F:      include/net/llc*
 F:      net/llc/
 
 LIS3LV02D ACCELEROMETER DRIVER
-P:      Eric Piel
-M:      eric.piel@tremplin-utc.net
+M:      Eric Piel <eric.piel@tremplin-utc.net>
 S:      Maintained
 F:      Documentation/hwmon/lis3lv02d
 F:      drivers/hwmon/lis3lv02d.*
 
 LM83 HARDWARE MONITOR DRIVER
-P:      Jean Delvare
-M:      khali@linux-fr.org
+M:      Jean Delvare <khali@linux-fr.org>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/lm83
 F:      drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-P:      Jean Delvare
-M:      khali@linux-fr.org
+M:      Jean Delvare <khali@linux-fr.org>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/lm90
 F:      drivers/hwmon/lm90.c
 
 LOCKDEP AND LOCKSTAT
-P:      Peter Zijlstra
-M:      peterz@infradead.org
-P:      Ingo Molnar
-M:      mingo@redhat.com
+M:      Peter Zijlstra <peterz@infradead.org>
+M:      Ingo Molnar <mingo@redhat.com>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
 S:      Maintained
 F:      Documentation/lockdep*.txt
@@ -3704,8 +3198,7 @@ F:	include/linux/lockdep.h
 F:      kernel/lockdep*
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P:      Richard Russon (FlatCap)
-M:      ldm@flatcap.org
+M:      "Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:      linux-ntfs-dev@lists.sourceforge.net
 W:      http://www.linux-ntfs.org/content/view/19/37/
 S:      Maintained
@@ -3713,8 +3206,7 @@ F:	Documentation/ldm.txt
 F:      fs/partitions/ldm.*
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P:      Eric Moore
-M:      Eric.Moore@lsi.com
+M:      Eric Moore <Eric.Moore@lsi.com>
 M:      support@lsi.com
 L:      DL-MPTFusionLinux@lsi.com
 L:      linux-scsi@vger.kernel.org
@@ -3723,25 +3215,21 @@ S:	Supported
 F:      drivers/message/fusion/
 
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P:      Matthew Wilcox
-M:      matthew@wil.cx
+M:      Matthew Wilcox <matthew@wil.cx>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-P:      Subrata Modak
-M:      subrata@linux.vnet.ibm.com
-P:      Mike Frysinger
-M:      vapier@gentoo.org
+M:      Subrata Modak <subrata@linux.vnet.ibm.com>
+M:      Mike Frysinger <vapier@gentoo.org>
 L:      ltp-list@lists.sourceforge.net (subscribers-only)
 W:      http://ltp.sourceforge.net/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
 S:      Maintained
 
 M32R ARCHITECTURE
-P:      Hirokazu Takata
-M:      takata@linux-m32r.org
+M:      Hirokazu Takata <takata@linux-m32r.org>
 L:      linux-m32r@ml.linux-m32r.org
 L:      linux-m32r-ja@ml.linux-m32r.org (in Japanese)
 W:      http://www.linux-m32r.org/
@@ -3749,10 +3237,8 @@ S:	Maintained
 F:      arch/m32r/
 
 M68K ARCHITECTURE
-P:      Geert Uytterhoeven
-M:      geert@linux-m68k.org
-P:      Roman Zippel
-M:      zippel@linux-m68k.org
+M:      Geert Uytterhoeven <geert@linux-m68k.org>
+M:      Roman Zippel <zippel@linux-m68k.org>
 L:      linux-m68k@lists.linux-m68k.org
 W:      http://www.linux-m68k.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -3761,23 +3247,20 @@ F:	arch/m68k/
 F:      drivers/zorro/
 
 M68K ON APPLE MACINTOSH
-P:      Joshua Thompson
-M:      funaho@jurai.org
+M:      Joshua Thompson <funaho@jurai.org>
 W:      http://www.mac.linux-m68k.org/
 L:      linux-m68k@lists.linux-m68k.org
 S:      Maintained
 F:      arch/m68k/mac/
 
 M68K ON HP9000/300
-P:      Philip Blundell
-M:      philb@gnu.org
+M:      Philip Blundell <philb@gnu.org>
 W:      http://www.tazenda.demon.co.uk/phil/linux-hp
 S:      Maintained
 F:      arch/m68k/hp300/
 
 MAC80211
-P:      Johannes Berg
-M:      johannes@sipsolutions.net
+M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3787,10 +3270,8 @@ F:	include/net/mac80211.h
 F:      net/mac80211/
 
 MAC80211 PID RATE CONTROL
-P:      Stefano Brivio
-M:      stefano.brivio@polimi.it
-P:      Mattias Nissler
-M:      mattias.nissler@gmx.de
+M:      Stefano Brivio <stefano.brivio@polimi.it>
+M:      Mattias Nissler <mattias.nissler@gmx.de>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3798,67 +3279,57 @@ S:	Maintained
 F:      net/mac80211/rc80211_pid*
 
 MACVLAN DRIVER
-P:      Patrick McHardy
-M:      kaber@trash.net
+M:      Patrick McHardy <kaber@trash.net>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/macvlan.c
 F:      include/linux/if_macvlan.h
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P:      Michael Kerrisk
-M:      mtk.manpages@gmail.com
+M:      Michael Kerrisk <mtk.manpages@gmail.com>
 W:      http://www.kernel.org/doc/man-pages
 L:      linux-man@vger.kernel.org
 S:      Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
-P:      Dan Williams
-M:      dcbw@redhat.com
+M:      Dan Williams <dcbw@redhat.com>
 L:      libertas-dev@lists.infradead.org
 S:      Maintained
 F:      drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-P:      Lennert Buytenhek
-M:      buytenh@marvell.com
+M:      Lennert Buytenhek <buytenh@marvell.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/mv643xx_eth.*
 F:      include/linux/mv643xx.h
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P:      Nicolas Pitre
-M:      nico@cam.org
+M:      Nicolas Pitre <nico@cam.org>
 S:      Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
-P:      Mirko Lindner
-M:      mlindner@syskonnect.de
-P:      Ralph Roesler
-M:      rroesler@syskonnect.de
+M:      Mirko Lindner <mlindner@syskonnect.de>
+M:      Ralph Roesler <rroesler@syskonnect.de>
 W:      http://www.syskonnect.com
 S:      Supported
 
 MATROX FRAMEBUFFER DRIVER
-P:      Petr Vandrovec
-M:      vandrove@vc.cvut.cz
+M:      Petr Vandrovec <vandrove@vc.cvut.cz>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/matrox/matroxfb_*
 F:      include/linux/matroxfb.h
 
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:      Hans J. Koch
-M:      hjk@linutronix.de
+M:      "Hans J. Koch" <hjk@linutronix.de>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/max6650
 F:      drivers/hwmon/max6650.c
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P:      Mauro Carvalho Chehab
-M:      mchehab@infradead.org
+M:      Mauro Carvalho Chehab <mchehab@infradead.org>
 P:      LinuxTV.org Project
 L:      linux-media@vger.kernel.org
 W:      http://linuxtv.org
@@ -3872,8 +3343,7 @@ F:	include/linux/dvb/
 F:      include/linux/videodev*.h
 
 MEGARAID SCSI DRIVERS
-P:      Neela Syam Kolli
-M:      megaraidlinux@lsi.com
+M:      Neela Syam Kolli <megaraidlinux@lsi.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://megaraid.lsilogic.com
 S:      Maintained
@@ -3889,19 +3359,15 @@ F:	include/linux/mm.h
 F:      mm/
 
 MEMORY RESOURCE CONTROLLER
-P:      Balbir Singh
-M:      balbir@linux.vnet.ibm.com
-P:      Pavel Emelyanov
-M:      xemul@openvz.org
-P:      KAMEZAWA Hiroyuki
-M:      kamezawa.hiroyu@jp.fujitsu.com
+M:      Balbir Singh <balbir@linux.vnet.ibm.com>
+M:      Pavel Emelyanov <xemul@openvz.org>
+M:      KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:      linux-mm@kvack.org
 S:      Maintained
 F:      mm/memcontrol.c
 
 MEMORY TECHNOLOGY DEVICES (MTD)
-P:      David Woodhouse
-M:      dwmw2@infradead.org
+M:      David Woodhouse <dwmw2@infradead.org>
 W:      http://www.linux-mtd.infradead.org/
 L:      linux-mtd@lists.infradead.org
 T:      git git://git.infradead.org/mtd-2.6.git
@@ -3911,8 +3377,7 @@ F:	include/linux/mtd/
 F:      include/mtd/
 
 MICROBLAZE ARCHITECTURE
-P:      Michal Simek
-M:      monstr@monstr.eu
+M:      Michal Simek <monstr@monstr.eu>
 L:      microblaze-uclinux@itee.uq.edu.au
 W:      http://www.monstr.eu/fdt/
 T:      git git://git.monstr.eu/linux-2.6-microblaze.git
@@ -3920,14 +3385,12 @@ S:	Supported
 F:      arch/microblaze/
 
 MICROTEK X6 SCANNER
-P:      Oliver Neukum
-M:      oliver@neukum.name
+M:      Oliver Neukum <oliver@neukum.name>
 S:      Maintained
 F:      drivers/usb/image/microtek.*
 
 MIPS
-P:      Ralf Baechle
-M:      ralf@linux-mips.org
+M:      Ralf Baechle <ralf@linux-mips.org>
 W:      http://www.linux-mips.org/
 L:      linux-mips@linux-mips.org
 T:      git git://git.linux-mips.org/pub/scm/linux.git
@@ -3936,8 +3399,7 @@ F:	Documentation/mips/
 F:      arch/mips/
 
 MISCELLANEOUS MCA-SUPPORT
-P:      James Bottomley
-M:      James.Bottomley@HansenPartnership.com
+M:      James Bottomley <James.Bottomley@HansenPartnership.com>
 S:      Maintained
 F:      Documentation/ia64/mca.txt
 F:      Documentation/mca.txt
@@ -3945,15 +3407,13 @@ F:	drivers/mca/
 F:      include/linux/mca*
 
 MODULE SUPPORT
-P:      Rusty Russell
-M:      rusty@rustcorp.com.au
+M:      Rusty Russell <rusty@rustcorp.com.au>
 S:      Maintained
 F:      include/linux/module.h
 F:      kernel/module.c
 
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P:      Stelian Pop
-M:      stelian@popies.net
+M:      Stelian Pop <stelian@popies.net>
 W:      http://popies.net/meye/
 S:      Maintained
 F:      Documentation/video4linux/meye.txt
@@ -3961,135 +3421,111 @@ F:	drivers/media/video/meye.*
 F:      include/linux/meye.h
 
 MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:      Pavel Pisa
-M:      ppisa@pikron.com
+M:      Pavel Pisa <ppisa@pikron.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      drivers/mmc/host/imxmmc.*
 
 MOUSE AND MISC DEVICES [GENERAL]
-P:      Alessandro Rubini
-M:      rubini@ipvvis.unipv.it
+M:      Alessandro Rubini <rubini@ipvvis.unipv.it>
 S:      Maintained
 F:      drivers/input/mouse/
 F:      include/linux/gpio_mouse.h
 
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P:      Jiri Slaby
-M:      jirislaby@gmail.com
+M:      Jiri Slaby <jirislaby@gmail.com>
 S:      Maintained
 F:      Documentation/serial/moxa-smartio
 F:      drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-P:      Lennart Poettering
-M:      mzxreary@0pointer.de
+M:      Lennart Poettering <mzxreary@0pointer.de>
 W:      https://tango.0pointer.de/mailman/listinfo/s270-linux
 W:      http://0pointer.de/lennart/tchibo.html
 S:      Maintained
 F:      drivers/platform/x86/msi-laptop.c
 
 MULTIFUNCTION DEVICES (MFD)
-P:      Samuel Ortiz
-M:      sameo@linux.intel.com
+M:      Samuel Ortiz <sameo@linux.intel.com>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
 S:      Supported
 F:      drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P:      Pierre Ossman
-M:      pierre@ossman.eu
-S:      Maintained
+S:      Orphan
 F:      drivers/mmc/
 F:      include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 S:      Odd Fixes
 F:      drivers/mmc/host/mmc_spi.c
 F:      include/linux/spi/mmc_spi.h
 
 MULTISOUND SOUND DRIVER
-P:      Andrew Veliath
-M:      andrewtv@usa.net
+M:      Andrew Veliath <andrewtv@usa.net>
 S:      Maintained
 F:      Documentation/sound/oss/MultiSound
 F:      sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-P:      Jiri Slaby
-M:      jirislaby@gmail.com
+M:      Jiri Slaby <jirislaby@gmail.com>
 S:      Maintained
 F:      drivers/char/isicom.c
 F:      include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:      Felipe Balbi
-M:      felipe.balbi@nokia.com
+M:      Felipe Balbi <felipe.balbi@nokia.com>
 L:      linux-usb@vger.kernel.org
 T:      git git://gitorious.org/musb/mainline.git
 S:      Maintained
 F:      drivers/usb/musb/
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P:      Andrew Gallatin
-M:      gallatin@myri.com
-P:      Brice Goglin
-M:      brice@myri.com
+M:      Andrew Gallatin <gallatin@myri.com>
+M:      Brice Goglin <brice@myri.com>
 L:      netdev@vger.kernel.org
 W:      http://www.myri.com/scs/download-Myri10GE.html
 S:      Supported
 F:      drivers/net/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P:      Tim Hockin
-M:      thockin@hockin.org
+M:      Tim Hockin <thockin@hockin.org>
 S:      Maintained
 F:      drivers/net/natsemi.c
 
 NCP FILESYSTEM
-P:      Petr Vandrovec
-M:      vandrove@vc.cvut.cz
+M:      Petr Vandrovec <vandrove@vc.cvut.cz>
 L:      linware@sh.cvut.cz
 S:      Maintained
 F:      fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P:      James E.J. Bottomley
-M:      James.Bottomley@HansenPartnership.com
+M:      "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P:      Faisal Latif
-M:      faisal.latif@intel.com
-P:      Chien Tung
-M:      chien.tin.tung@intel.com
+M:      Faisal Latif <faisal.latif@intel.com>
+M:      Chien Tung <chien.tin.tung@intel.com>
 L:      general@lists.openfabrics.org
 W:      http://www.neteffect.com
 S:      Supported
 F:      drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-P:      Stephen Hemminger
-M:      shemminger@linux-foundation.org
+M:      Stephen Hemminger <shemminger@linux-foundation.org>
 L:      netem@lists.linux-foundation.org
 S:      Maintained
 F:      net/sched/sch_netem.c
 
 NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P:      Ramkrishna Vepa
-M:      ram.vepa@neterion.com
-P:      Rastapur Santosh
-M:      santosh.rastapur@neterion.com
-P:      Sivakumar Subramani
-M:      sivakumar.subramani@neterion.com
-P:      Sreenivasa Honnur
-M:      sreenivasa.honnur@neterion.com
-P:      Anil Murthy
-M:      anil.murthy@neterion.com
+M:      Ramkrishna Vepa <ram.vepa@neterion.com>
+M:      Rastapur Santosh <santosh.rastapur@neterion.com>
+M:      Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M:      Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M:      Anil Murthy <anil.murthy@neterion.com>
 L:      netdev@vger.kernel.org
 W:      http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:      http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -4103,13 +3539,13 @@ P:	Marc Boucher
 P:      James Morris
 P:      Harald Welte
 P:      Jozsef Kadlecsik
-P:      Patrick McHardy
-M:      kaber@trash.net
+M:      Patrick McHardy <kaber@trash.net>
 L:      netfilter-devel@vger.kernel.org
 L:      netfilter@vger.kernel.org
 L:      coreteam@netfilter.org
 W:      http://www.netfilter.org/
 W:      http://www.iptables.org/
+T:      git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 S:      Supported
 F:      include/linux/netfilter*
 F:      include/linux/netfilter/
@@ -4119,8 +3555,7 @@ F:	net/*/netfilter/
 F:      net/netfilter/
 
 NETLABEL
-P:      Paul Moore
-M:      paul.moore@hp.com
+M:      Paul Moore <paul.moore@hp.com>
 W:      http://netlabel.sf.net
 L:      netdev@vger.kernel.org
 S:      Supported
@@ -4129,8 +3564,7 @@ F:	include/net/netlabel.h
 F:      net/netlabel/
 
 NETROM NETWORK LAYER
-P:      Ralf Baechle
-M:      ralf@linux-mips.org
+M:      Ralf Baechle <ralf@linux-mips.org>
 L:      linux-hams@vger.kernel.org
 W:      http://www.linux-ax25.org/
 S:      Maintained
@@ -4139,16 +3573,14 @@ F:	include/net/netrom.h
 F:      net/netrom/
 
 NETWORK BLOCK DEVICE (NBD)
-P:      Paul Clements
-M:      Paul.Clements@steeleye.com
+M:      Paul Clements <Paul.Clements@steeleye.com>
 S:      Maintained
 F:      Documentation/blockdev/nbd.txt
 F:      drivers/block/nbd.c
 F:      include/linux/nbd.h
 
 NETWORKING [GENERAL]
-P:      David S. Miller
-M:      davem@davemloft.net
+M:      "David S. Miller" <davem@davemloft.net>
 L:      netdev@vger.kernel.org
 W:      http://www.linuxfoundation.org/en/Net
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
@@ -4157,18 +3589,12 @@ F:	net/
 F:      include/net/
 
 NETWORKING [IPv4/IPv6]
-P:      David S. Miller
-M:      davem@davemloft.net
-P:      Alexey Kuznetsov
-M:      kuznet@ms2.inr.ac.ru
-P:      Pekka Savola (ipv6)
-M:      pekkas@netcore.fi
-P:      James Morris
-M:      jmorris@namei.org
-P:      Hideaki YOSHIFUJI
-M:      yoshfuji@linux-ipv6.org
-P:      Patrick McHardy
-M:      kaber@trash.net
+M:      "David S. Miller" <davem@davemloft.net>
+M:      Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M:      "Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M:      James Morris <jmorris@namei.org>
+M:      Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M:      Patrick McHardy <kaber@trash.net>
 L:      netdev@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:      Maintained
@@ -4177,14 +3603,12 @@ F:	net/ipv6/
 F:      include/net/ip*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P:      Paul Moore
-M:      paul.moore@hp.com
+M:      Paul Moore <paul.moore@hp.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 
 NETWORKING [WIRELESS]
-P:      John W. Linville
-M:      linville@tuxdriver.com
+M:      "John W. Linville" <linville@tuxdriver.com>
 L:      linux-wireless@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:      Maintained
@@ -4200,16 +3624,14 @@ S:	Odd Fixes
 F:      drivers/net/
 
 NETXEN (1/10) GbE SUPPORT
-P:      Dhananjay Phadke
-M:      dhananjay@netxen.com
+M:      Dhananjay Phadke <dhananjay@netxen.com>
 L:      netdev@vger.kernel.org
 W:      http://www.netxen.com
 S:      Supported
 F:      drivers/net/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-P:      Trond Myklebust
-M:      Trond.Myklebust@netapp.com
+M:      Trond Myklebust <Trond.Myklebust@netapp.com>
 L:      linux-nfs@vger.kernel.org
 W:      http://client.linux-nfs.org
 T:      git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
@@ -4223,17 +3645,14 @@ F:	include/linux/nfs*
 F:      include/linux/sunrpc/
 
 NI5010 NETWORK DRIVER
-P:      Jan-Pascal van Best
-M:      janpascal@vanbest.org
-P:      Andreas Mohr
-M:      andi@lisas.de
+M:      Jan-Pascal van Best <janpascal@vanbest.org>
+M:      Andreas Mohr <andi@lisas.de>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/ni5010.*
 
 NILFS2 FILESYSTEM
-P:      KONISHI Ryusuke
-M:      konishi.ryusuke@lab.ntt.co.jp
+M:      KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
 L:      users@nilfs.org
 W:      http://www.nilfs.org/en/
 S:      Supported
@@ -4242,26 +3661,22 @@ F:	fs/nilfs2/
 F:      include/linux/nilfs2_fs.h
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P:      YOKOTA Hiroshi
-M:      yokota@netlab.is.tsukuba.ac.jp
+M:      YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:      http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:      Maintained
 F:      Documentation/scsi/NinjaSCSI.txt
 F:      drivers/scsi/pcmcia/nsp_*
 
 NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P:      GOTO Masanori
-M:      gotom@debian.or.jp
-P:      YOKOTA Hiroshi
-M:      yokota@netlab.is.tsukuba.ac.jp
+M:      GOTO Masanori <gotom@debian.or.jp>
+M:      YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:      http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:      Maintained
 F:      Documentation/scsi/NinjaSCSI.txt
 F:      drivers/scsi/nsp32*
 
 NTFS FILESYSTEM
-P:      Anton Altaparmakov
-M:      aia21@cantab.net
+M:      Anton Altaparmakov <aia21@cantab.net>
 L:      linux-ntfs-dev@lists.sourceforge.net
 W:      http://www.linux-ntfs.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
@@ -4270,16 +3685,14 @@ F:	Documentation/filesystems/ntfs.txt
 F:      fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P:      Antonino Daplas
-M:      adaplas@gmail.com
+M:      Antonino Daplas <adaplas@gmail.com>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/riva/
 F:      drivers/video/nvidia/
 
 OMAP SUPPORT
-P:      Tony Lindgren <tony@atomide.com>
-M:      tony@atomide.com
+M:      "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
 L:      linux-omap@vger.kernel.org
 W:      http://www.muru.com/linux/omap/
 W:      http://linux.omap.com/
@@ -4288,98 +3701,83 @@ S:	Maintained
 F:      arch/arm/*omap*
 
 OMAP CLOCK FRAMEWORK SUPPORT
-P:      Paul Walmsley
-M:      paul@pwsan.com
+M:      Paul Walmsley <paul@pwsan.com>
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 F:      arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-P:      Kevin Hilman
-M:      khilman@deeprootsystems.com
+M:      Kevin Hilman <khilman@deeprootsystems.com>
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 F:      arch/arm/*omap*/*pm*
 
 OMAP AUDIO SUPPORT
-P:      Jarkko Nikula
-M:      jhnikula@gmail.com
+M:      Jarkko Nikula <jhnikula@gmail.com>
 L:      alsa-devel@alsa-project.org (subscribers-only)
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 F:      sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-P:      Imre Deak
-M:      imre.deak@nokia.com
+M:      Imre Deak <imre.deak@nokia.com>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 F:      drivers/video/omap/
 
 OMAP MMC SUPPORT
-P:      Jarkko Lavinen
-M:      jarkko.lavinen@nokia.com
-L:      linux-kernel@vger.kernel.org
+M:      Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 F:      drivers/mmc/host/*omap*
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:      Deepak Saxena
-M:      dsaxena@plexity.net
+M:      Deepak Saxena <dsaxena@plexity.net>
 S:      Maintained
 F:      drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-P:      Felipe Balbi
-M:      felipe.balbi@nokia.com
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      Felipe Balbi <felipe.balbi@nokia.com>
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 L:      linux-omap@vger.kernel.org
 S:      Maintained
 
 OMFS FILESYSTEM
-P:      Bob Copeland
-M:      me@bobcopeland.com
+M:      Bob Copeland <me@bobcopeland.com>
 L:      linux-karma-devel@lists.sourceforge.net
 S:      Maintained
 F:      Documentation/filesystems/omfs.txt
 F:      fs/omfs/
 
 OMNIKEY CARDMAN 4000 DRIVER
-P:      Harald Welte
-M:      laforge@gnumonks.org
+M:      Harald Welte <laforge@gnumonks.org>
 S:      Maintained
 F:      drivers/char/pcmcia/cm4000_cs.c
 F:      include/linux/cm4000_cs.h
 
 OMNIKEY CARDMAN 4040 DRIVER
-P:      Harald Welte
-M:      laforge@gnumonks.org
+M:      Harald Welte <laforge@gnumonks.org>
 S:      Maintained
 F:      drivers/char/pcmcia/cm4040_cs.*
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:      Jonathan Corbet
-M:      corbet@lwn.net
+M:      Jonathan Corbet <corbet@lwn.net>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
 F:      drivers/media/video/ov7670.c
 
 ONENAND FLASH DRIVER
-P:      Kyungmin Park
-M:      kyungmin.park@samsung.com
+M:      Kyungmin Park <kyungmin.park@samsung.com>
 L:      linux-mtd@lists.infradead.org
 S:      Maintained
 F:      drivers/mtd/onenand/
 F:      include/linux/mtd/onenand*.h
 
 ONSTREAM SCSI TAPE DRIVER
-P:      Willem Riede
-M:      osst@riede.org
+M:      Willem Riede <osst@riede.org>
 L:      osst-users@lists.sourceforge.net
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
@@ -4387,16 +3785,14 @@ F:	drivers/scsi/osst*
 F:      drivers/scsi/st*
 
 OPENCORES I2C BUS DRIVER
-P:      Peter Korsgaard
-M:      jacmet@sunsite.dk
+M:      Peter Korsgaard <jacmet@sunsite.dk>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      Documentation/i2c/busses/i2c-ocores
 F:      drivers/i2c/busses/i2c-ocores.c
 
 OPROFILE
-P:      Robert Richter
-M:      robert.richter@amd.com
+M:      Robert Richter <robert.richter@amd.com>
 L:      oprofile-list@lists.sf.net
 S:      Maintained
 F:      arch/*/oprofile/
@@ -4404,10 +3800,8 @@ F:	drivers/oprofile/
 F:      include/linux/oprofile.h
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P:      Mark Fasheh
-M:      mfasheh@suse.com
-P:      Joel Becker
-M:      joel.becker@oracle.com
+M:      Mark Fasheh <mfasheh@suse.com>
+M:      Joel Becker <joel.becker@oracle.com>
 L:      ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:      http://oss.oracle.com/projects/ocfs2/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
@@ -4417,10 +3811,8 @@ F:	Documentation/filesystems/dlmfs.txt
 F:      fs/ocfs2/
 
 ORINOCO DRIVER
-P:      Pavel Roskin
-M:      proski@gnu.org
-P:      David Gibson
-M:      hermes@gibson.dropbear.id.au
+M:      Pavel Roskin <proski@gnu.org>
+M:      David Gibson <hermes@gibson.dropbear.id.au>
 L:      linux-wireless@vger.kernel.org
 L:      orinoco-users@lists.sourceforge.net
 L:      orinoco-devel@lists.sourceforge.net
@@ -4429,10 +3821,8 @@ S:	Maintained
 F:      drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
-P:      Boaz Harrosh
-M:      bharrosh@panasas.com
-P:      Benny Halevy
-M:      bhalevy@panasas.com
+M:      Boaz Harrosh <bharrosh@panasas.com>
+M:      Benny Halevy <bhalevy@panasas.com>
 L:      osd-dev@open-osd.org
 W:      http://open-osd.org
 T:      git git://git.open-osd.org/open-osd.git
@@ -4442,8 +3832,7 @@ F:	drivers/include/scsi/osd_*
 F:      fs/exofs/
 
 P54 WIRELESS DRIVER
-P:      Michael Wu
-M:      flamingice@sourmilk.net
+M:      Michael Wu <flamingice@sourmilk.net>
 L:      linux-wireless@vger.kernel.org
 W:      http://prism54.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -4451,30 +3840,25 @@ S:	Maintained
 F:      drivers/net/wireless/p54/
 
 PA SEMI ETHERNET DRIVER
-P:      Olof Johansson
-M:      olof@lixom.net
+M:      Olof Johansson <olof@lixom.net>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/pasemi_mac.*
 
 PA SEMI SMBUS DRIVER
-P:      Olof Johansson
-M:      olof@lixom.net
+M:      Olof Johansson <olof@lixom.net>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      drivers/i2c/busses/i2c-pasemi.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P:      Harald Welte
-M:      laforge@gnumonks.org
+M:      Harald Welte <laforge@gnumonks.org>
 S:      Maintained
 F:      drivers/platform/x86/panasonic-laptop.c
 
 PANASONIC MN10300/AM33 PORT
-P:      David Howells
-M:      dhowells@redhat.com
-P:      Koichi Yasutake
-M:      yasutake.koichi@jp.panasonic.com
+M:      David Howells <dhowells@redhat.com>
+M:      Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
 L:      linux-am33-list@redhat.com (moderated for non-subscribers)
 W:      ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
 S:      Maintained
@@ -4490,14 +3874,10 @@ F:	drivers/char/ppdev.c
 F:      include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-P:      Jeremy Fitzhardinge
-M:      jeremy@xensource.com
-P:      Chris Wright
-M:      chrisw@sous-sol.org
-P:      Alok Kataria
-M:      akataria@vmware.com
-P:      Rusty Russell
-M:      rusty@rustcorp.com.au
+M:      Jeremy Fitzhardinge <jeremy@xensource.com>
+M:      Chris Wright <chrisw@sous-sol.org>
+M:      Alok Kataria <akataria@vmware.com>
+M:      Rusty Russell <rusty@rustcorp.com.au>
 L:      virtualization@lists.osdl.org
 S:      Supported
 F:      Documentation/ia64/paravirt_ops.txt
@@ -4505,8 +3885,7 @@ F:	arch/*/kernel/paravirt*
 F:      arch/*/include/asm/paravirt.h
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P:      Tim Waugh
-M:      tim@cyberelk.net
+M:      Tim Waugh <tim@cyberelk.net>
 L:      linux-parport@lists.infradead.org (subscribers-only)
 W:      http://www.torque.net/linux-pp.html
 S:      Maintained
@@ -4514,10 +3893,8 @@ F:	Documentation/blockdev/paride.txt
 F:      drivers/block/paride/
 
 PARISC ARCHITECTURE
-P:      Kyle McMartin
-M:      kyle@mcmartin.ca
-P:      Helge Deller
-M:      deller@gmx.de
+M:      Kyle McMartin <kyle@mcmartin.ca>
+M:      Helge Deller <deller@gmx.de>
 L:      linux-parisc@vger.kernel.org
 W:      http://www.parisc-linux.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4526,37 +3903,32 @@ F:	arch/parisc/
 F:      drivers/parisc/
 
 PC87360 HARDWARE MONITORING DRIVER
-P:      Jim Cromie
-M:      jim.cromie@gmail.com
+M:      Jim Cromie <jim.cromie@gmail.com>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/pc87360
 F:      drivers/hwmon/pc87360.c
 
 PC8736x GPIO DRIVER
-P:      Jim Cromie
-M:      jim.cromie@gmail.com
+M:      Jim Cromie <jim.cromie@gmail.com>
 S:      Maintained
 F:      drivers/char/pc8736x_gpio.c
 
 PCA9532 LED DRIVER
-P:      Riku Voipio
-M:      riku.voipio@iki.fi
+M:      Riku Voipio <riku.voipio@iki.fi>
 S:      Maintained
 F:      drivers/leds/leds-pca9532.c
 F:      include/linux/leds-pca9532.h
 
 PCI ERROR RECOVERY
-P:      Linas Vepstas
-M:      linas@austin.ibm.com
+M:      Linas Vepstas <linas@austin.ibm.com>
 L:      linux-pci@vger.kernel.org
 S:      Supported
 F:      Documentation/PCI/pci-error-recovery.txt
 F:      Documentation/powerpc/eeh-pci-error-recovery.txt
 
 PCI SUBSYSTEM
-P:      Jesse Barnes
-M:      jbarnes@virtuousgeek.org
+M:      Jesse Barnes <jbarnes@virtuousgeek.org>
 L:      linux-pci@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:      Supported
@@ -4565,8 +3937,7 @@ F:	drivers/pci/
 F:      include/linux/pci*
 
 PCIE HOTPLUG DRIVER
-P:      Kristen Carlson Accardi
-M:      kristen.c.accardi@intel.com
+M:      Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:      linux-pci@vger.kernel.org
 S:      Supported
 F:      drivers/pci/pcie/
@@ -4582,121 +3953,103 @@ F:	drivers/pcmcia/
 F:      include/pcmcia/
 
 PCNET32 NETWORK DRIVER
-P:      Don Fry
-M:      pcnet32@verizon.net
+M:      Don Fry <pcnet32@verizon.net>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/pcnet32.c
 
 PER-TASK DELAY ACCOUNTING
-P:      Balbir Singh
-M:      balbir@linux.vnet.ibm.com
+M:      Balbir Singh <balbir@linux.vnet.ibm.com>
 S:      Maintained
 F:      include/linux/delayacct.h
 F:      kernel/delayacct.c
 
 PERFORMANCE COUNTER SUBSYSTEM
-P:      Peter Zijlstra
-M:      a.p.zijlstra@chello.nl
-P:      Paul Mackerras
-M:      paulus@samba.org
-P:      Ingo Molnar
-M:      mingo@elte.hu
-L:      linux-kernel@vger.kernel.org
+M:      Peter Zijlstra <a.p.zijlstra@chello.nl>
+M:      Paul Mackerras <paulus@samba.org>
+M:      Ingo Molnar <mingo@elte.hu>
 S:      Supported
 
 PERSONALITY HANDLING
-P:      Christoph Hellwig
-M:      hch@infradead.org
+M:      Christoph Hellwig <hch@infradead.org>
 L:      linux-abi-devel@lists.sourceforge.net
 S:      Maintained
 F:      include/linux/personality.h
 
 PHRAM MTD DRIVER
-P:      Joern Engel
-M:      joern@lazybastard.org
+M:      Joern Engel <joern@lazybastard.org>
 L:      linux-mtd@lists.infradead.org
 S:      Maintained
 F:      drivers/mtd/devices/phram.c
 
 PKTCDVD DRIVER
-P:      Peter Osterlund
-M:      petero2@telia.com
+M:      Peter Osterlund <petero2@telia.com>
 S:      Maintained
 F:      drivers/block/pktcdvd.c
 F:      include/linux/pktcdvd.h
 
 POSIX CLOCKS and TIMERS
-P:      Thomas Gleixner
-M:      tglx@linutronix.de
+M:      Thomas Gleixner <tglx@linutronix.de>
 S:      Supported
 F:      fs/timerfd.c
 F:      include/linux/timer*
 F:      kernel/*timer*
 
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P:      Anton Vorontsov
-M:      cbou@mail.ru
-P:      David Woodhouse
-M:      dwmw2@infradead.org
+M:      Anton Vorontsov <cbou@mail.ru>
+M:      David Woodhouse <dwmw2@infradead.org>
 T:      git git://git.infradead.org/battery-2.6.git
 S:      Maintained
 F:      include/linux/power_supply.h
 F:      drivers/power/power_supply*
 
 PNP SUPPORT
-P:      Adam Belay
-M:      abelay@mit.edu
-P:      Bjorn Helgaas
-M:      bjorn.helgaas@hp.com
+M:      Adam Belay <abelay@mit.edu>
+M:      Bjorn Helgaas <bjorn.helgaas@hp.com>
 S:      Maintained
 F:      drivers/pnp/
 
 PNXxxxx I2C DRIVER
-P:      Vitaly Wool
-M:      vitalywool@gmail.com
+M:      Vitaly Wool <vitalywool@gmail.com>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      drivers/i2c/busses/i2c-pnx.c
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
-P:      Paul Mackerras
-M:      paulus@samba.org
+M:      Paul Mackerras <paulus@samba.org>
 L:      linux-ppp@vger.kernel.org
 S:      Maintained
 F:      drivers/net/ppp_*
 
 PPP OVER ATM (RFC 2364)
-P:      Mitchell Blank Jr
-M:      mitch@sfgoth.com
+M:      Mitchell Blank Jr <mitch@sfgoth.com>
 S:      Maintained
 F:      net/atm/pppoatm.c
 F:      include/linux/atmppp.h
 
 PPP OVER ETHERNET
-P:      Michal Ostrowski
-M:      mostrows@earthlink.net
+M:      Michal Ostrowski <mostrows@earthlink.net>
 S:      Maintained
 F:      drivers/net/pppoe.c
 F:      drivers/net/pppox.c
 
 PPP OVER L2TP
-P:      James Chapman
-M:      jchapman@katalix.com
+M:      James Chapman <jchapman@katalix.com>
 S:      Maintained
 F:      drivers/net/pppol2tp.c
 F:      include/linux/if_pppol2tp.h
 
 PPS SUPPORT
-P:      Rodolfo Giometti
-M:      giometti@enneenne.com
+M:      Rodolfo Giometti <giometti@enneenne.com>
 W:      http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:      linuxpps@ml.enneenne.com (subscribers-only)
 S:      Maintained
+F:      Documentation/pps/
+F:      drivers/pps/
+F:      include/linux/pps*.h
 
 PREEMPTIBLE KERNEL
-P:      Robert Love
-M:      rml@tech9.net
+M:      Robert Love <rml@tech9.net>
 L:      kpreempt-tech@lists.sourceforge.net
 W:      ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
 S:      Supported
@@ -4704,37 +4057,32 @@ F:	Documentation/preempt-locking.txt
 F:      include/linux/preempt.h
 
 PRISM54 WIRELESS DRIVER
-P:      Luis R. Rodriguez
-M:      mcgrof@gmail.com
+M:      "Luis R. Rodriguez" <mcgrof@gmail.com>
 L:      linux-wireless@vger.kernel.org
 W:      http://prism54.org
 S:      Maintained
 F:      drivers/net/wireless/prism54/
 
 PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P:      Peter Denison
-M:      promise@pnd-pc.demon.co.uk
+M:      Peter Denison <promise@pnd-pc.demon.co.uk>
 W:      http://www.pnd-pc.demon.co.uk/promise/
 S:      Maintained
 
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P:      Mikael Pettersson
-M:      mikpe@it.uu.se
+M:      Mikael Pettersson <mikpe@it.uu.se>
 L:      linux-ide@vger.kernel.org
 S:      Maintained
 F:      drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:      Geoff Levand
-M:      geoffrey.levand@am.sony.com
+M:      Geoff Levand <geoffrey.levand@am.sony.com>
 L:      netdev@vger.kernel.org
 L:      cbe-oss-dev@ozlabs.org
 S:      Supported
 F:      drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-P:      Geoff Levand
-M:      geoffrey.levand@am.sony.com
+M:      Geoff Levand <geoffrey.levand@am.sony.com>
 L:      linuxppc-dev@ozlabs.org
 L:      cbe-oss-dev@ozlabs.org
 S:      Supported
@@ -4749,16 +4097,13 @@ F:	drivers/usb/host/*ps3.c
 F:      sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
-P:      Jim Paris
-M:      jim@jtan.com
+M:      Jim Paris <jim@jtan.com>
 L:      cbe-oss-dev@ozlabs.org
 S:      Maintained
 
 PTRACE SUPPORT
-P:      Roland McGrath
-M:      roland@redhat.com
-P:      Oleg Nesterov
-M:      oleg@redhat.com
+M:      Roland McGrath <roland@redhat.com>
+M:      Oleg Nesterov <oleg@redhat.com>
 S:      Maintained
 F:      include/asm-generic/syscall.h
 F:      include/linux/ptrace.h
@@ -4767,8 +4112,7 @@ F:	include/linux/tracehook.h
 F:      kernel/ptrace.c
 
 PVRUSB2 VIDEO4LINUX DRIVER
-P:      Mike Isely
-M:      isely@pobox.com
+M:      Mike Isely <isely@pobox.com>
 L:      pvrusb2@isely.net       (subscribers-only)
 L:      linux-media@vger.kernel.org
 W:      http://www.isely.net/pvrusb2/
@@ -4778,10 +4122,8 @@ F:	Documentation/video4linux/README.pvrusb2
 F:      drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
-P:      Eric Miao
-M:      eric.y.miao@gmail.com
-P:      Russell King
-M:      linux@arm.linux.org.uk
+M:      Eric Miao <eric.y.miao@gmail.com>
+M:      Russell King <linux@arm.linux.org.uk>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
 F:      arch/arm/mach-pxa/
@@ -4793,17 +4135,14 @@ F:	sound/arm/pxa*
 F:      sound/soc/pxa
 
 PXA168 SUPPORT
-P:      Eric Miao
-M:      eric.y.miao@gmail.com
-P:      Jason Chagas
-M:      jason.chagas@marvell.com
+M:      Eric Miao <eric.y.miao@gmail.com>
+M:      Jason Chagas <jason.chagas@marvell.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:      Maintained
 
 PXA910 SUPPORT
-P:      Eric Miao
-M:      eric.y.miao@gmail.com
+M:      Eric Miao <eric.y.miao@gmail.com>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:      Maintained
@@ -4812,13 +4151,12 @@ PXA MMCI DRIVER
 S:      Orphan
 
 PXA RTC DRIVER
-P:      Robert Jarzmik
-M:      robert.jarzmik@free.fr
+M:      Robert Jarzmik <robert.jarzmik@free.fr>
 L:      rtc-linux@googlegroups.com
 S:      Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-P:      Andrew Vasquez
+M:      Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:      linux-driver@qlogic.com
 L:      linux-scsi@vger.kernel.org
 S:      Supported
@@ -4826,7 +4164,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:      drivers/scsi/qla2xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-P:      Ron Mercer
+M:      Ron Mercer <ron.mercer@qlogic.com>
 M:      linux-driver@qlogic.com
 L:      netdev@vger.kernel.org
 S:      Supported
@@ -4834,16 +4172,14 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:      drivers/net/qla3xxx.*
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-P:      Ron Mercer
+M:      Ron Mercer <ron.mercer@qlogic.com>
 M:      linux-driver@qlogic.com
-M:      ron.mercer@qlogic.com
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/qlge/
 
 QNX4 FILESYSTEM
-P:      Anders Larsen
-M:      al@alarsen.net
+M:      Anders Larsen <al@alarsen.net>
 W:      http://www.alarsen.net/linux/qnx4fs/
 S:      Maintained
 F:      fs/qnx4/
@@ -4851,16 +4187,14 @@ F:	include/linux/qnx4_fs.h
 F:      include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
-P:      Benjamin Herrenschmidt
-M:      benh@kernel.crashing.org
+M:      Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/aty/radeon*
 F:      include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P:      Paul Mackerras
-M:      paulus@samba.org
+M:      Paul Mackerras <paulus@samba.org>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/aty/aty128fb.c
@@ -4875,64 +4209,53 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:      drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-P:      Nick Piggin
-M:      npiggin@suse.de
+M:      Nick Piggin <npiggin@suse.de>
 S:      Maintained
 F:      Documentation/blockdev/ramdisk.txt
 F:      drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-P:      Matt Mackall
-M:      mpm@selenic.com
+M:      Matt Mackall <mpm@selenic.com>
 S:      Maintained
 F:      drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
-P:      Matt Porter
-M:      mporter@kernel.crashing.org
+M:      Matt Porter <mporter@kernel.crashing.org>
 S:      Maintained
 F:      drivers/rapidio/
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P:      Corey Thomas
-M:      coreythomas@charter.net
+M:      Corey Thomas <coreythomas@charter.net>
 L:      linux-wireless@vger.kernel.org
 S:      Maintained
 F:      drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
-P:      Josh Triplett
-M:      josh@freedesktop.org
-P:      Paul E. McKenney
-M:      paulmck@linux.vnet.ibm.com
+M:      Josh Triplett <josh@freedesktop.org>
+M:      "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:      Maintained
 F:      Documentation/RCU/torture.txt
 F:      kernel/rcutorture.c
 
 RDC R-321X SoC
-P:      Florian Fainelli
-M:      florian@openwrt.org
+M:      Florian Fainelli <florian@openwrt.org>
 S:      Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
-P:      Florian Fainelli
-M:      florian@openwrt.org
+M:      Florian Fainelli <florian@openwrt.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-P:      Andy Grover
-M:      andy.grover@oracle.com
+M:      Andy Grover <andy.grover@oracle.com>
 L:      rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:      Supported
 F:      net/rds/
 
 READ-COPY UPDATE (RCU)
-P:      Dipankar Sarma
-M:      dipankar@in.ibm.com
-P:      Paul E. McKenney
-M:      paulmck@linux.vnet.ibm.com
+M:      Dipankar Sarma <dipankar@in.ibm.com>
+M:      "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:      http://www.rdrop.com/users/paulmck/rclock/
 S:      Supported
 F:      Documentation/RCU/rcu.txt
@@ -4942,16 +4265,14 @@ F:	include/linux/srcu.h
 F:      kernel/rcupdate.c
 
 REAL TIME CLOCK DRIVER
-P:      Paul Gortmaker
-M:      p_gortmaker@yahoo.com
+M:      Paul Gortmaker <p_gortmaker@yahoo.com>
 S:      Maintained
 F:      Documentation/rtc.txt
 F:      drivers/rtc/
 F:      include/linux/rtc.h
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
-P:      Alessandro Zummo
-M:      a.zummo@towertech.it
+M:      Alessandro Zummo <a.zummo@towertech.it>
 L:      rtc-linux@googlegroups.com
 S:      Maintained
 F:      Documentation/rtc.txt
@@ -4964,8 +4285,7 @@ S:	Supported
 F:      fs/reiserfs/
 
 RFKILL
-P:      Johannes Berg
-M:      johannes@sipsolutions.net
+M:      Johannes Berg <johannes@sipsolutions.net>
 L:      linux-wireless@vger.kernel.org
 S:      Maintained
 F       Documentation/rfkill.txt
@@ -4984,8 +4304,7 @@ F:	Documentation/serial/rocket.txt
 F:      drivers/char/rocket*
 
 ROSE NETWORK LAYER
-P:      Ralf Baechle
-M:      ralf@linux-mips.org
+M:      Ralf Baechle <ralf@linux-mips.org>
 L:      linux-hams@vger.kernel.org
 W:      http://www.linux-ax25.org/
 S:      Maintained
@@ -4994,8 +4313,7 @@ F:	include/net/rose.h
 F:      net/rose/
 
 RTL8180 WIRELESS DRIVER
-P:      John W. Linville
-M:      linville@tuxdriver.com
+M:      "John W. Linville" <linville@tuxdriver.com>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -5003,12 +4321,9 @@ S:	Maintained
 F:      drivers/net/wireless/rtl818*
 
 RTL8187 WIRELESS DRIVER
-P:      Herton Ronaldo Krzesinski
-M:      herton@mandriva.com.br
-P:      Hin-Tak Leung
-M:      htl10@users.sourceforge.net
-P:      Larry Finger
-M:      Larry.Finger@lwfinger.net
+M:      Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:      Hin-Tak Leung <htl10@users.sourceforge.net>
+M:      Larry Finger <Larry.Finger@lwfinger.net>
 L:      linux-wireless@vger.kernel.org
 W:      http://linuxwireless.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -5016,17 +4331,14 @@ S:	Maintained
 F:      drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
-P:      Antonino Daplas
-M:      adaplas@gmail.com
+M:      Antonino Daplas <adaplas@gmail.com>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/savage/
 
 S390
-P:      Martin Schwidefsky
-M:      schwidefsky@de.ibm.com
-P:      Heiko Carstens
-M:      heiko.carstens@de.ibm.com
+M:      Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:      Heiko Carstens <heiko.carstens@de.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 W:      http://www.ibm.com/developerworks/linux/linux390/
@@ -5034,10 +4346,8 @@ S:	Supported
 F:      arch/s390/
 
 S390 NETWORK DRIVERS
-P:      Ursula Braun
-M:      ursula.braun@de.ibm.com
-P:      Frank Blaschka
-M:      blaschka@linux.vnet.ibm.com
+M:      Ursula Braun <ursula.braun@de.ibm.com>
+M:      Frank Blaschka <blaschka@linux.vnet.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 W:      http://www.ibm.com/developerworks/linux/linux390/
@@ -5045,20 +4355,16 @@ S:	Supported
 F:      drivers/s390/net/
 
 S390 ZCRYPT DRIVER
-P:      Felix Beck
-M:      felix.beck@de.ibm.com
-P:      Ralph Wuerthner
-M:      ralph.wuerthner@de.ibm.com
+M:      Felix Beck <felix.beck@de.ibm.com>
+M:      Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 S:      Supported
 F:      drivers/s390/crypto/
 
 S390 ZFCP DRIVER
-P:      Christof Schmitt
-M:      christof.schmitt@de.ibm.com
-P:      Martin Peschke
-M:      mp3@de.ibm.com
+M:      Christof Schmitt <christof.schmitt@de.ibm.com>
+M:      Martin Peschke <mp3@de.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 W:      http://www.ibm.com/developerworks/linux/linux390/
@@ -5067,8 +4373,7 @@ F:	Documentation/s390/zfcpdump.txt
 F:      drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER
-P:      Ursula Braun
-M:      ursula.braun@de.ibm.com
+M:      Ursula Braun <ursula.braun@de.ibm.com>
 M:      linux390@de.ibm.com
 L:      linux-s390@vger.kernel.org
 W:      http://www.ibm.com/developerworks/linux/linux390/
@@ -5078,15 +4383,13 @@ F:	include/net/iucv/
 F:      net/iucv/
 
 S3C24XX SD/MMC Driver
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Supported
 F:      drivers/mmc/host/s3cmci.*
 
 SAA7146 VIDEO4LINUX-2 DRIVER
-P:      Michael Hunold
-M:      michael@mihu.de
+M:      Michael Hunold <michael@mihu.de>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:      http://www.mihu.de/linux/saa7146
@@ -5096,31 +4399,26 @@ F:	drivers/media/video/*7146*
 F:      include/media/*7146*
 
 SC1200 WDT DRIVER
-P:      Zwane Mwaikambo
-M:      zwane@arm.linux.org.uk
+M:      Zwane Mwaikambo <zwane@arm.linux.org.uk>
 S:      Maintained
 F:      drivers/watchdog/sc1200wdt.c
 
 SCHEDULER
-P:      Ingo Molnar
-M:      mingo@elte.hu
-P:      Peter Zijlstra
-M:      peterz@infradead.org
+M:      Ingo Molnar <mingo@elte.hu>
+M:      Peter Zijlstra <peterz@infradead.org>
 S:      Maintained
 F:      kernel/sched*
 F:      include/linux/sched.h
 
 SCSI CDROM DRIVER
-P:      Jens Axboe
-M:      axboe@kernel.dk
+M:      Jens Axboe <axboe@kernel.dk>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.kernel.dk
 S:      Maintained
 F:      drivers/scsi/sr*
 
 SCSI SG DRIVER
-P:      Doug Gilbert
-M:      dgilbert@interlog.com
+M:      Doug Gilbert <dgilbert@interlog.com>
 L:      linux-scsi@vger.kernel.org
 W:      http://www.torque.net/sg
 S:      Maintained
@@ -5128,8 +4426,7 @@ F:	drivers/scsi/sg.c
 F:      include/scsi/sg.h
 
 SCSI SUBSYSTEM
-P:      James E.J. Bottomley
-M:      James.Bottomley@HansenPartnership.com
+M:      "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:      linux-scsi@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -5139,18 +4436,15 @@ F:	drivers/scsi/
 F:      include/scsi/
 
 SCSI TAPE DRIVER
-P:      Kai Mäkisara
-M:      Kai.Makisara@kolumbus.fi
+M:      Kai Mäkisara <Kai.Makisara@kolumbus.fi>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      Documentation/scsi/st.txt
 F:      drivers/scsi/st*
 
 SCTP PROTOCOL
-P:      Vlad Yasevich
-M:      vladislav.yasevich@hp.com
-P:      Sridhar Samudrala
-M:      sri@us.ibm.com
+M:      Vlad Yasevich <vladislav.yasevich@hp.com>
+M:      Sridhar Samudrala <sri@us.ibm.com>
 L:      linux-sctp@vger.kernel.org
 W:      http://lksctp.sourceforge.net
 S:      Supported
@@ -5160,8 +4454,7 @@ F:	include/net/sctp/
 F:      net/sctp/
 
 SCx200 CPU SUPPORT
-P:      Jim Cromie
-M:      jim.cromie@gmail.com
+M:      Jim Cromie <jim.cromie@gmail.com>
 S:      Odd Fixes
 F:      Documentation/i2c/busses/scx200_acb
 F:      arch/x86/kernel/scx200_32.c
@@ -5171,49 +4464,42 @@ F:	drivers/mtd/maps/scx200_docflash.c
 F:      include/linux/scx200.h
 
 SCx200 GPIO DRIVER
-P:      Jim Cromie
-M:      jim.cromie@gmail.com
+M:      Jim Cromie <jim.cromie@gmail.com>
 S:      Maintained
 F:      drivers/char/scx200_gpio.c
 F:      include/linux/scx200_gpio.h
 
 SCx200 HRT CLOCKSOURCE DRIVER
-P:      Jim Cromie
-M:      jim.cromie@gmail.com
+M:      Jim Cromie <jim.cromie@gmail.com>
 S:      Maintained
 F:      drivers/clocksource/scx200_hrt.c
 
 SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:      Sascha Sommer
-M:      saschasommer@freenet.de
+M:      Sascha Sommer <saschasommer@freenet.de>
 L:      sdricohcs-devel@lists.sourceforge.net (subscribers-only)
 S:      Maintained
 F:      drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P:      Pierre Ossman
-M:      pierre@ossman.eu
+M:      Pierre Ossman <pierre@ossman.eu>
 L:      sdhci-devel@lists.ossman.eu
 S:      Maintained
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P:      Anton Vorontsov
-M:      avorontsov@ru.mvista.com
+M:      Anton Vorontsov <avorontsov@ru.mvista.com>
 L:      linuxppc-dev@ozlabs.org
 L:      sdhci-devel@lists.ossman.eu
 S:      Maintained
 F:      drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P:      Ben Dooks
-M:      ben-linux@fluff.org
+M:      Ben Dooks <ben-linux@fluff.org>
 L:      sdhci-devel@lists.ossman.eu
 S:      Maintained
 F:      drivers/mmc/host/sdhci-s3c.c
 
 SECURITY SUBSYSTEM
-P:      James Morris
-M:      jmorris@namei.org
+M:      James Morris <jmorris@namei.org>
 L:      linux-security-module@vger.kernel.org (suggested Cc:)
 T:      git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:      http://security.wiki.kernel.org/
@@ -5221,17 +4507,13 @@ S:	Supported
 F:      security/
 
 SECURITY CONTACT
-P:      Security Officers
-M:      security@kernel.org
+M:      Security Officers <security@kernel.org>
 S:      Supported
 
 SELINUX SECURITY MODULE
-P:      Stephen Smalley
-M:      sds@tycho.nsa.gov
-P:      James Morris
-M:      jmorris@namei.org
-P:      Eric Paris
-M:      eparis@parisplace.org
+M:      Stephen Smalley <sds@tycho.nsa.gov>
+M:      James Morris <jmorris@namei.org>
+M:      Eric Paris <eparis@parisplace.org>
 L:      selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:      http://selinuxproject.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5240,15 +4522,13 @@ F:	include/linux/selinux*
 F:      security/selinux/
 
 SENSABLE PHANTOM
-P:      Jiri Slaby
-M:      jirislaby@gmail.com
+M:      Jiri Slaby <jirislaby@gmail.com>
 S:      Maintained
 F:      drivers/misc/phantom.c
 F:      include/linux/phantom.h
 
 SERIAL ATA (SATA) SUBSYSTEM
-P:      Jeff Garzik
-M:      jgarzik@pobox.com
+M:      Jeff Garzik <jgarzik@pobox.com>
 L:      linux-ide@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:      Supported
@@ -5257,10 +4537,8 @@ F:	include/linux/ata.h
 F:      include/linux/libata.h
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P:      Sathya Perla
-M:      sathyap@serverengines.com
-P:      Subbu Seetharaman
-M:      subbus@serverengines.com
+M:      Sathya Perla <sathyap@serverengines.com>
+M:      Subbu Seetharaman <subbus@serverengines.com>
 L:      netdev@vger.kernel.org
 W:      http://www.serverengines.com
 S:      Supported
@@ -5269,20 +4547,17 @@ F:	drivers/net/benet/
 SFC NETWORK DRIVER
 P:      Steve Hodgson
 P:      Ben Hutchings
-P:      Robert Stonehouse
-M:      linux-net-drivers@solarflare.com
+M:      Robert Stonehouse <linux-net-drivers@solarflare.com>
 S:      Supported
 F:      drivers/net/sfc/
 
 SGI GRU DRIVER
-P:      Jack Steiner
-M:      steiner@sgi.com
+M:      Jack Steiner <steiner@sgi.com>
 S:      Maintained
 F:      drivers/misc/sgi-gru/
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P:      Pat Gefre
-M:      pfg@sgi.com
+M:      Pat Gefre <pfg@sgi.com>
 L:      linux-ia64@vger.kernel.org
 S:      Supported
 F:      Documentation/ia64/serial.txt
@@ -5290,22 +4565,19 @@ F:	drivers/serial/ioc?_serial.c
 F:      include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
-P:      Andrey Panin
-M:      pazke@donpac.ru
+M:      Andrey Panin <pazke@donpac.ru>
 L:      linux-visws-devel@lists.sf.net
 W:      http://linux-visws.sf.net
 S:      Maintained for 2.6.
 F:      Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:      Robin Holt
-M:      holt@sgi.com
+M:      Robin Holt <holt@sgi.com>
 S:      Maintained
 F:      drivers/misc/sgi-xp/
 
 SHARP LH SUPPORT (LH7952X & LH7A40X)
-P:      Marc Singer
-M:      elf@buici.com
+M:      Marc Singer <elf@buici.com>
 W:      http://projects.buici.com/arm
 L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:      Maintained
@@ -5316,23 +4588,20 @@ F:	drivers/usb/gadget/lh7a40*
 F:      drivers/usb/host/ohci-lh7a40*
 
 SHPC HOTPLUG DRIVER
-P:      Kristen Carlson Accardi
-M:      kristen.c.accardi@intel.com
+M:      Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:      linux-pci@vger.kernel.org
 S:      Supported
 F:      drivers/pci/hotplug/shpchp*
 
 SIMTEC EB110ATX (Chalice CATS)
 P:      Ben Dooks
-P:      Vincent Sanders
-M:      support@simtec.co.uk
+M:      Vincent Sanders <support@simtec.co.uk>
 W:      http://www.simtec.co.uk/products/EB110ATX/
 S:      Supported
 
 SIMTEC EB2410ITX (BAST)
 P:      Ben Dooks
-P:      Vincent Sanders
-M:      support@simtec.co.uk
+M:      Vincent Sanders <support@simtec.co.uk>
 W:      http://www.simtec.co.uk/products/EB2410ITX/
 S:      Supported
 F:      arch/arm/mach-s3c2410/
@@ -5340,31 +4609,27 @@ F:	drivers/*/*s3c2410*
 F:      drivers/*/*/*s3c2410*
 
 SIS 190 ETHERNET DRIVER
-P:      Francois Romieu
-M:      romieu@fr.zoreil.com
+M:      Francois Romieu <romieu@fr.zoreil.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
-P:      Daniele Venzano
-M:      venza@brownhat.org
+M:      Daniele Venzano <venza@brownhat.org>
 W:      http://www.brownhat.org/sis900.html
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
-P:      Mark M. Hoffman
-M:      mhoffman@lightlink.com
+M:      "Mark M. Hoffman" <mhoffman@lightlink.com>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      Documentation/i2c/busses/i2c-sis96x
 F:      drivers/i2c/busses/i2c-sis96x.c
 
 SIS FRAMEBUFFER DRIVER
-P:      Thomas Winischhofer
-M:      thomas@winischhofer.net
+M:      Thomas Winischhofer <thomas@winischhofer.net>
 W:      http://www.winischhofer.net/linuxsisvga.shtml
 S:      Maintained
 F:      Documentation/fb/sisfb.txt
@@ -5372,70 +4637,59 @@ F:	drivers/video/sis/
 F:      include/video/sisfb.h
 
 SIS USB2VGA DRIVER
-P:      Thomas Winischhofer
-M:      thomas@winischhofer.net
+M:      Thomas Winischhofer <thomas@winischhofer.net>
 W:      http://www.winischhofer.at/linuxsisusbvga.shtml
 S:      Maintained
 F:      drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P:      Stephen Hemminger
-M:      shemminger@linux-foundation.org
+M:      Stephen Hemminger <shemminger@linux-foundation.org>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/skge.*
 F:      drivers/net/sky2.*
 
 SLAB ALLOCATOR
-P:      Christoph Lameter
-M:      cl@linux-foundation.org
-P:      Pekka Enberg
-M:      penberg@cs.helsinki.fi
-P:      Matt Mackall
-M:      mpm@selenic.com
+M:      Christoph Lameter <cl@linux-foundation.org>
+M:      Pekka Enberg <penberg@cs.helsinki.fi>
+M:      Matt Mackall <mpm@selenic.com>
 L:      linux-mm@kvack.org
 S:      Maintained
 F:      include/linux/sl?b*.h
 F:      mm/sl?b.c
 
 SMC91x ETHERNET DRIVER
-P:      Nicolas Pitre
-M:      nico@cam.org
+M:      Nicolas Pitre <nico@cam.org>
 S:      Maintained
 F:      drivers/net/smc91x.*
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-P:      Mark M. Hoffman
-M:      mhoffman@lightlink.com
+M:      "Mark M. Hoffman" <mhoffman@lightlink.com>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/smsc47b397
 F:      drivers/hwmon/smsc47b397.c
 
 SMSC911x ETHERNET DRIVER
-P:      Steve Glendinning
-M:      steve.glendinning@smsc.com
+M:      Steve Glendinning <steve.glendinning@smsc.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      include/linux/smsc911x.h
 F:      drivers/net/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
-P:      Steve Glendinning
-M:      steve.glendinning@smsc.com
+M:      Steve Glendinning <steve.glendinning@smsc.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/smsc9420.*
 
 SMX UIO Interface
-P:      Ben Nizette
-M:      bn@niasdigital.com
+M:      Ben Nizette <bn@niasdigital.com>
 S:      Maintained
 F:      drivers/uio/uio_smx.c
 
 SN-IA64 (Itanium) SUB-PLATFORM
-P:      Jes Sorensen
-M:      jes@sgi.com
+M:      Jes Sorensen <jes@sgi.com>
 L:      linux-altix@sgi.com
 L:      linux-ia64@vger.kernel.org
 W:      http://www.sgi.com/altix
@@ -5443,8 +4697,7 @@ S:	Maintained
 F:      arch/ia64/sn/
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:      Guennadi Liakhovetski
-M:      g.liakhovetski@gmx.de
+M:      Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:      Maintained
@@ -5452,37 +4705,32 @@ F:	include/media/v4l2*
 F:      drivers/media/video/v4l2*
 
 SOEKRIS NET48XX LED SUPPORT
-P:      Chris Boot
-M:      bootc@bootc.net
+M:      Chris Boot <bootc@bootc.net>
 S:      Maintained
 F:      drivers/leds/leds-net48xx.c
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:      Neil Brown
-M:      neilb@suse.de
+M:      Neil Brown <neilb@suse.de>
 L:      linux-raid@vger.kernel.org
 S:      Supported
 F:      drivers/md/
 F:      include/linux/raid/
 
 SONIC NETWORK DRIVER
-P:      Thomas Bogendoerfer
-M:      tsbogend@alpha.franken.de
+M:      Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
-P:      Michael Buesch
-M:      mb@bu3sch.de
+M:      Michael Buesch <mb@bu3sch.de>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/ssb/
 F:      include/linux/ssb/
 
 SONY VAIO CONTROL DEVICE DRIVER
-P:      Mattia Dongili
-M:      malattia@linux.it
+M:      Mattia Dongili <malattia@linux.it>
 L:      linux-acpi@vger.kernel.org
 W:      http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:      Maintained
@@ -5492,17 +4740,14 @@ F:	drivers/platform/x86/sony-laptop.c
 F:      include/linux/sony-laptop.h
 
 SONY MEMORYSTICK CARD SUPPORT
-P:      Alex Dubov
-M:      oakad@yahoo.com
+M:      Alex Dubov <oakad@yahoo.com>
 W:      http://tifmxx.berlios.de/
 S:      Maintained
 F:      drivers/memstick/host/tifm_ms.c
 
 SOUND
-P:      Jaroslav Kysela
-M:      perex@perex.cz
-P:      Takashi Iwai
-M:      tiwai@suse.de
+M:      Jaroslav Kysela <perex@perex.cz>
+M:      Takashi Iwai <tiwai@suse.de>
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:      http://www.alsa-project.org/
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
@@ -5513,10 +4758,8 @@ F:	include/sound/
 F:      sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P:      Liam Girdwood
-M:      lrg@slimlogic.co.uk
-P:      Mark Brown
-M:      broonie@opensource.wolfsonmicro.com
+M:      Liam Girdwood <lrg@slimlogic.co.uk>
+M:      Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:      http://alsa-project.org/main/index.php/ASoC
@@ -5525,8 +4768,7 @@ F:	sound/soc/
 F:      include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
-P:      David S. Miller
-M:      davem@davemloft.net
+M:      "David S. Miller" <davem@davemloft.net>
 L:      sparclinux@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
@@ -5534,15 +4776,13 @@ S:	Maintained
 F:      arch/sparc/
 
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P:      Roger Wolff
-M:      R.E.Wolff@BitWizard.nl
+M:      Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:      Supported
 F:      Documentation/serial/specialix.txt
 F:      drivers/char/specialix*
 
 SPI SUBSYSTEM
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      spi-devel-general@lists.sourceforge.net
 S:      Maintained
 F:      Documentation/spi/
@@ -5550,18 +4790,15 @@ F:	drivers/spi/
 F:      include/linux/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
-P:      Ishizaki Kou
-M:      kou.ishizaki@toshiba.co.jp
-P:      Jens Osterkamp
-M:      jens@de.ibm.com
+M:      Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M:      Jens Osterkamp <jens@de.ibm.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      Documentation/networking/spider_net.txt
 F:      drivers/net/spider_net*
 
 SPU FILE SYSTEM
-P:      Jeremy Kerr
-M:      jk@ozlabs.org
+M:      Jeremy Kerr <jk@ozlabs.org>
 L:      linuxppc-dev@ozlabs.org
 L:      cbe-oss-dev@ozlabs.org
 W:      http://www.ibm.com/developerworks/power/cell/
@@ -5570,8 +4807,7 @@ F:	Documentation/filesystems/spufs.txt
 F:      arch/powerpc/platforms/cell/spufs/
 
 SQUASHFS FILE SYSTEM
-P:      Phillip Lougher
-M:      phillip@lougher.demon.co.uk
+M:      Phillip Lougher <phillip@lougher.demon.co.uk>
 L:      squashfs-devel@lists.sourceforge.net (subscribers-only)
 W:      http://squashfs.org.uk
 S:      Maintained
@@ -5579,49 +4815,41 @@ F:	Documentation/filesystems/squashfs.txt
 F:      fs/squashfs/
 
 SRM (Alpha) environment access
-P:      Jan-Benedict Glaw
-M:      jbglaw@lug-owl.de
+M:      Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:      Maintained
 F:      arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-P:      Greg Kroah-Hartman
-M:      greg@kroah.com
-P:      Chris Wright
-M:      chrisw@sous-sol.org
+M:      Greg Kroah-Hartman <greg@kroah.com>
+M:      Chris Wright <chrisw@sous-sol.org>
 L:      stable@kernel.org
 S:      Maintained
 
 STAGING SUBSYSTEM
-P:      Greg Kroah-Hartman
-M:      gregkh@suse.de
+M:      Greg Kroah-Hartman <gregkh@suse.de>
 T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 L:      devel@driverdev.osuosl.org
 S:      Maintained
 F:      drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
-P:      Ion Badulescu
-M:      ionut@badula.org
+M:      Ion Badulescu <ionut@badula.org>
 S:      Odd Fixes
 F:      drivers/net/starfire*
 
 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
-W:      http://mosquitonet.Stanford.EDU/strip.html
 S:      Orphan
 F:      drivers/net/wireless/strip.c
 F:      include/linux/if_strip.h
 
 STRADIS MPEG-2 DECODER DRIVER
-P:      Nathan Laredo
-M:      laredo@gnu.org
+M:      Nathan Laredo <laredo@gnu.org>
 W:      http://www.stradis.com/
 S:      Maintained
 F:      drivers/media/video/stradis.c
 
 SUN3/3X
-P:      Sam Creasey
-M:      sammy@sammy.net
+M:      Sam Creasey <sammy@sammy.net>
 W:      http://sammy.net/sun3/
 S:      Maintained
 F:      arch/m68k/kernel/*sun3*
@@ -5629,8 +4857,7 @@ F:	arch/m68k/sun3*/
 F:      arch/m68k/include/asm/sun3*
 
 SUPERH
-P:      Paul Mundt
-M:      lethal@linux-sh.org
+M:      Paul Mundt <lethal@linux-sh.org>
 L:      linux-sh@vger.kernel.org
 W:      http://www.linux-sh.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
@@ -5640,12 +4867,9 @@ F:	arch/sh/
 F:      drivers/sh/
 
 SUSPEND TO RAM
-P:      Len Brown
-M:      len.brown@intel.com
-P:      Pavel Machek
-M:      pavel@ucw.cz
-P:      Rafael J. Wysocki
-M:      rjw@sisk.pl
+M:      Len Brown <len.brown@intel.com>
+M:      Pavel Machek <pavel@ucw.cz>
+M:      "Rafael J. Wysocki" <rjw@sisk.pl>
 L:      linux-pm@lists.linux-foundation.org
 S:      Supported
 F:      Documentation/power/
@@ -5657,32 +4881,28 @@ F:	include/linux/freezer.h
 F:      include/linux/pm.h
 
 SVGA HANDLING
-P:      Martin Mares
-M:      mj@ucw.cz
+M:      Martin Mares <mj@ucw.cz>
 L:      linux-video@atrey.karlin.mff.cuni.cz
 S:      Maintained
 F:      Documentation/svga.txt
 F:      arch/x86/boot/video*
 
 SYSV FILESYSTEM
-P:      Christoph Hellwig
-M:      hch@infradead.org
+M:      Christoph Hellwig <hch@infradead.org>
 S:      Maintained
 F:      Documentation/filesystems/sysv-fs.txt
 F:      fs/sysv/
 F:      include/linux/sysv_fs.h
 
 TASKSTATS STATISTICS INTERFACE
-P:      Balbir Singh
-M:      balbir@linux.vnet.ibm.com
+M:      Balbir Singh <balbir@linux.vnet.ibm.com>
 S:      Maintained
 F:      Documentation/accounting/taskstats*
 F:      include/linux/taskstats*
 F:      kernel/taskstats.c
 
 TC CLASSIFIER
-P:      Jamal Hadi Salim
-M:      hadi@cyberus.ca
+M:      Jamal Hadi Salim <hadi@cyberus.ca>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      include/linux/pkt_cls.h
@@ -5690,38 +4910,31 @@ F:	include/net/pkt_cls.h
 F:      net/sched/
 
 TCP LOW PRIORITY MODULE
-P:      Wong Hoi Sing, Edison
-M:      hswong3i@gmail.com
-P:      Hung Hing Lun, Mike
-M:      hlhung3i@gmail.com
+M:      "Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M:      "Hung Hing Lun, Mike" <hlhung3i@gmail.com>
 W:      http://tcp-lp-mod.sourceforge.net/
 S:      Maintained
 F:      net/ipv4/tcp_lp.c
 
 TEHUTI ETHERNET DRIVER
-P:      Alexander Indenbaum
-M:      baum@tehutinetworks.net
-P:      Andy Gospodarek
-M:      andy@greyhouse.net
+M:      Alexander Indenbaum <baum@tehutinetworks.net>
+M:      Andy Gospodarek <andy@greyhouse.net>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/tehuti*
 
 Telecom Clock Driver for MCPL0010
-P:      Mark Gross
-M:      mark.gross@intel.com
+M:      Mark Gross <mark.gross@intel.com>
 S:      Supported
 F:      drivers/char/tlclk.c
 
 TENSILICA XTENSA PORT (xtensa)
-P:      Chris Zankel
-M:      chris@zankel.net
+M:      Chris Zankel <chris@zankel.net>
 S:      Maintained
 F:      arch/xtensa/
 
 THINKPAD ACPI EXTRAS DRIVER
-P:      Henrique de Moraes Holschuh
-M:      ibm-acpi@hmh.eng.br
+M:      Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:      ibm-acpi-devel@lists.sourceforge.net
 W:      http://ibm-acpi.sourceforge.net
 W:      http://thinkwiki.org/wiki/Ibm-acpi
@@ -5730,27 +4943,22 @@ S:	Maintained
 F:      drivers/platform/x86/thinkpad_acpi.c
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:      Alex Dubov
-M:      oakad@yahoo.com
+M:      Alex Dubov <oakad@yahoo.com>
 S:      Maintained
 F:      drivers/misc/tifm*
 F:      drivers/mmc/host/tifm_sd.c
 F:      include/linux/tifm.h
 
 TI TWL4030 SERIES SOC CODEC DRIVER
-P:      Peter Ujfalusi
-M:      peter.ujfalusi@nokia.com
+M:      Peter Ujfalusi <peter.ujfalusi@nokia.com>
 L:      alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:      Maintained
 F:      sound/soc/codecs/twl4030*
 
 TIPC NETWORK LAYER
-P:      Per Liden
-M:      per.liden@ericsson.com
-P:      Jon Maloy
-M:      jon.maloy@ericsson.com
-P:      Allan Stephens
-M:      allan.stephens@windriver.com
+M:      Per Liden <per.liden@ericsson.com>
+M:      Jon Maloy <jon.maloy@ericsson.com>
+M:      Allan Stephens <allan.stephens@windriver.com>
 L:      tipc-discussion@lists.sourceforge.net
 W:      http://tipc.sourceforge.net/
 W:      http://tipc.cslab.ericsson.net/
@@ -5761,8 +4969,7 @@ F:	include/net/tipc/
 F:      net/tipc/
 
 TLAN NETWORK DRIVER
-P:      Samuel Chessman
-M:      chessman@tux.org
+M:      Samuel Chessman <chessman@tux.org>
 L:      tlan-devel@lists.sourceforge.net (subscribers-only)
 W:      http://sourceforge.net/projects/tlan/
 S:      Maintained
@@ -5770,10 +4977,8 @@ F:	Documentation/networking/tlan.txt
 F:      drivers/net/tlan.*
 
 TOMOYO SECURITY MODULE
-P:      Kentaro Takeda
-M:      takedakn@nttdata.co.jp
-P:      Tetsuo Handa
-M:      penguin-kernel@I-love.SAKURA.ne.jp
+M:      Kentaro Takeda <takedakn@nttdata.co.jp>
+M:      Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
 L:      tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
 L:      tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:      tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5787,8 +4992,7 @@ S:	Orphan
 F:      drivers/platform/x86/toshiba_acpi.c
 
 TOSHIBA SMM DRIVER
-P:      Jonathan Buzzard
-M:      jonathan@buzzard.org.uk
+M:      Jonathan Buzzard <jonathan@buzzard.org.uk>
 L:      tlinux-users@tce.toshiba-dme.co.jp
 W:      http://www.buzzard.org.uk/toshiba/
 S:      Maintained
@@ -5796,43 +5000,34 @@ F:	drivers/char/toshiba.c
 F:      include/linux/toshiba.h
 
 TMIO MMC DRIVER
-P:      Ian Molton
-M:      ian@mnementh.co.uk
+M:      Ian Molton <ian@mnementh.co.uk>
 S:      Maintained
 F:      drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-P:      Hugh Dickins
-M:      hugh.dickins@tiscali.co.uk
+M:      Hugh Dickins <hugh.dickins@tiscali.co.uk>
 L:      linux-mm@kvack.org
 S:      Maintained
 F:      include/linux/shmem_fs.h
 F:      mm/shmem.c
 
 TPM DEVICE DRIVER
-P:      Debora Velarde
-M:      debora@linux.vnet.ibm.com
-P:      Rajiv Andrade
-M:      srajiv@linux.vnet.ibm.com
+M:      Debora Velarde <debora@linux.vnet.ibm.com>
+M:      Rajiv Andrade <srajiv@linux.vnet.ibm.com>
 W:      http://tpmdd.sourceforge.net
-P:      Marcel Selhorst
-M:      m.selhorst@sirrix.com
+M:      Marcel Selhorst <m.selhorst@sirrix.com>
 W:      http://www.sirrix.com
 L:      tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/char/tpm/
 
 TRIVIAL PATCHES
-P:      Jiri Kosina
-M:      trivial@kernel.org
+M:      Jiri Kosina <trivial@kernel.org>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:      Maintained
 
 TTY LAYER
-P:      Alan Cox
-M:      alan@lxorguk.ukuu.org.uk
-S:      Maintained
-T:      stgit http://zeniv.linux.org.uk/~alan/ttydev/
+S:      Orphan
 F:      drivers/char/tty_*
 F:      drivers/serial/serial_core.c
 F:      include/linux/serial_core.h
@@ -5840,17 +5035,14 @@ F:	include/linux/serial.h
 F:      include/linux/tty.h
 
 TULIP NETWORK DRIVERS
-P:      Grant Grundler
-M:      grundler@parisc-linux.org
-P:      Kyle McMartin
-M:      kyle@mcmartin.ca
+M:      Grant Grundler <grundler@parisc-linux.org>
+M:      Kyle McMartin <kyle@mcmartin.ca>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/tulip/
 
 TUN/TAP driver
-P:      Maxim Krasnyansky
-M:      maxk@qualcomm.com
+M:      Maxim Krasnyansky <maxk@qualcomm.com>
 L:      vtun@office.satix.net
 W:      http://vtun.sourceforge.net/tun
 S:      Maintained
@@ -5858,24 +5050,20 @@ F:	Documentation/networking/tuntap.txt
 F:      arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
-P:      Maciej W. Rozycki
-M:      macro@linux-mips.org
+M:      "Maciej W. Rozycki" <macro@linux-mips.org>
 S:      Maintained
 F:      drivers/tc/
 F:      include/linux/tc.h
 
 U14-34F SCSI DRIVER
-P:      Dario Ballabio
-M:      ballabio_dario@emc.com
+M:      Dario Ballabio <ballabio_dario@emc.com>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/u14-34f.c
 
 UBI FILE SYSTEM (UBIFS)
-P:      Artem Bityutskiy
-M:      dedekind@infradead.org
-P:      Adrian Hunter
-M:      adrian.hunter@nokia.com
+M:      Artem Bityutskiy <dedekind@infradead.org>
+M:      Adrian Hunter <adrian.hunter@nokia.com>
 L:      linux-mtd@lists.infradead.org
 T:      git git://git.infradead.org/ubifs-2.6.git
 W:      http://www.linux-mtd.infradead.org/doc/ubifs.html
@@ -5884,37 +5072,32 @@ F:	Documentation/filesystems/ubifs.txt
 F:      fs/ubifs/
 
 UCLINUX (AND M68KNOMMU)
-P:      Greg Ungerer
-M:      gerg@uclinux.org
+M:      Greg Ungerer <gerg@uclinux.org>
 W:      http://www.uclinux.org/
 L:      uclinux-dev@uclinux.org  (subscribers-only)
 S:      Maintained
 F:      arch/m68knommu/
 
 UCLINUX FOR RENESAS H8/300 (H8300)
-P:      Yoshinori Sato
-M:      ysato@users.sourceforge.jp
+M:      Yoshinori Sato <ysato@users.sourceforge.jp>
 W:      http://uclinux-h8.sourceforge.jp/
 S:      Supported
 
 UDF FILESYSTEM
-P:      Jan Kara
-M:      jack@suse.cz
+M:      Jan Kara <jack@suse.cz>
 W:      http://linux-udf.sourceforge.net
 S:      Maintained
 F:      Documentation/filesystems/udf.txt
 F:      fs/udf/
 
 UFS FILESYSTEM
-P:      Evgeniy Dushistov
-M:      dushistov@mail.ru
+M:      Evgeniy Dushistov <dushistov@mail.ru>
 S:      Maintained
 F:      Documentation/filesystems/ufs.txt
 F:      fs/ufs/
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P:      David Vrabel
-M:      david.vrabel@csr.com
+M:      David Vrabel <david.vrabel@csr.com>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 F:      drivers/uwb/*
@@ -5922,8 +5105,7 @@ F:	include/linux/uwb.h
 F:      include/linux/uwb/
 
 UNIFORM CDROM DRIVER
-P:      Jens Axboe
-M:      axboe@kernel.dk
+M:      Jens Axboe <axboe@kernel.dk>
 W:      http://www.kernel.dk
 S:      Maintained
 F:      Documentation/cdrom/
@@ -5931,8 +5113,7 @@ F:	drivers/cdrom/cdrom.c
 F:      include/linux/cdrom.h
 
 UNSORTED BLOCK IMAGES (UBI)
-P:      Artem Bityutskiy
-M:      dedekind@infradead.org
+M:      Artem Bityutskiy <dedekind@infradead.org>
 W:      http://www.linux-mtd.infradead.org/
 L:      linux-mtd@lists.infradead.org
 T:      git git://git.infradead.org/ubi-2.6.git
@@ -5942,23 +5123,20 @@ F:	include/linux/mtd/ubi.h
 F:      include/mtd/ubi-user.h
 
 USB ACM DRIVER
-P:      Oliver Neukum
-M:      oliver@neukum.name
+M:      Oliver Neukum <oliver@neukum.name>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      Documentation/usb/acm.txt
 F:      drivers/usb/class/cdc-acm.*
 
 USB BLOCK DRIVER (UB ub)
-P:      Pete Zaitcev
-M:      zaitcev@redhat.com
+M:      Pete Zaitcev <zaitcev@redhat.com>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 F:      drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-P:      Greg Kroah-Hartman
-M:      greg@kroah.com
+M:      Greg Kroah-Hartman <greg@kroah.com>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 W:      http://www.kroah.com/linux-usb/
@@ -5966,39 +5144,34 @@ F:	drivers/net/usb/cdc_*.c
 F:      include/linux/usb/cdc.h
 
 USB CYPRESS C67X00 DRIVER
-P:      Peter Korsgaard
-M:      jacmet@sunsite.dk
+M:      Peter Korsgaard <jacmet@sunsite.dk>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-P:      Peter Korsgaard
-M:      jacmet@sunsite.dk
+M:      Peter Korsgaard <jacmet@sunsite.dk>
 L:      netdev@vger.kernel.org
 W:      http://www.linux-usb.org/usbnet
 S:      Maintained
 F:      drivers/net/usb/dm9601.c
 
 USB DIAMOND RIO500 DRIVER
-P:      Cesar Miquel
-M:      miquel@df.uba.ar
+M:      Cesar Miquel <miquel@df.uba.ar>
 L:      rio500-users@lists.sourceforge.net
 W:      http://rio500.sourceforge.net
 S:      Maintained
 F:      drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 S:      Odd Fixes
 F:      Documentation/usb/ehci.txt
 F:      drivers/usb/host/ehci*
 
 USB ET61X[12]51 DRIVER
-P:      Luca Risolia
-M:      luca.risolia@studio.unibo.it
+M:      Luca Risolia <luca.risolia@studio.unibo.it>
 L:      linux-usb@vger.kernel.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6007,8 +5180,7 @@ S:	Maintained
 F:      drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 W:      http://www.linux-usb.org/gadget
 S:      Maintained
@@ -6016,8 +5188,7 @@ F:	drivers/usb/gadget/
 F:      include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P:      Jiri Kosina
-M:      jkosina@suse.cz
+M:      Jiri Kosina <jkosina@suse.cz>
 L:      linux-usb@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:      Maintained
@@ -6025,23 +5196,20 @@ F:	Documentation/usb/hiddev.txt
 F:      drivers/hid/usbhid/
 
 USB ISP116X DRIVER
-P:      Olav Kongas
-M:      ok@artecdesign.ee
+M:      Olav Kongas <ok@artecdesign.ee>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/host/isp116x*
 F:      include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-P:      Oliver Neukum
-M:      oliver@neukum.name
+M:      Oliver Neukum <oliver@neukum.name>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/serial/kl5kusb105.*
 
 USB MASS STORAGE DRIVER
-P:      Matthew Dharm
-M:      mdharm-usb@one-eyed-alien.net
+M:      Matthew Dharm <mdharm-usb@one-eyed-alien.net>
 L:      linux-usb@vger.kernel.org
 L:      usb-storage@lists.one-eyed-alien.net
 S:      Maintained
@@ -6049,31 +5217,27 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 F:      drivers/usb/storage/
 
 USB OHCI DRIVER
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 S:      Odd Fixes
 F:      Documentation/usb/ohci.txt
 F:      drivers/usb/host/ohci*
 
 USB OPTION-CARD DRIVER
-P:      Matthias Urlichs
-M:      smurf@smurf.noris.de
+M:      Matthias Urlichs <smurf@smurf.noris.de>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/serial/option.c
 
 USB OV511 DRIVER
-P:      Mark McClelland
-M:      mmcclell@bigfoot.com
+M:      Mark McClelland <mmcclell@bigfoot.com>
 L:      linux-usb@vger.kernel.org
 W:      http://alpha.dyndns.org/ov511/
 S:      Maintained
 F:      drivers/media/video/ov511.*
 
 USB PEGASUS DRIVER
-P:      Petko Manolov
-M:      petkan@users.sourceforge.net
+M:      Petko Manolov <petkan@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 L:      netdev@vger.kernel.org
 W:      http://pegasus2.sourceforge.net/
@@ -6081,15 +5245,13 @@ S:	Maintained
 F:      drivers/net/usb/pegasus.*
 
 USB PRINTER DRIVER (usblp)
-P:      Pete Zaitcev
-M:      zaitcev@redhat.com
+M:      Pete Zaitcev <zaitcev@redhat.com>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 F:      drivers/usb/class/usblp.c
 
 USB RTL8150 DRIVER
-P:      Petko Manolov
-M:      petkan@users.sourceforge.net
+M:      Petko Manolov <petkan@users.sourceforge.net>
 L:      linux-usb@vger.kernel.org
 L:      netdev@vger.kernel.org
 W:      http://pegasus2.sourceforge.net/
@@ -6097,8 +5259,7 @@ S:	Maintained
 F:      drivers/net/usb/rtl8150.c
 
 USB SE401 DRIVER
-P:      Jeroen Vreeken
-M:      pe1rxq@amsat.org
+M:      Jeroen Vreeken <pe1rxq@amsat.org>
 L:      linux-usb@vger.kernel.org
 W:      http://www.chello.nl/~j.vreeken/se401/
 S:      Maintained
@@ -6106,15 +5267,13 @@ F:	Documentation/video4linux/se401.txt
 F:      drivers/media/video/se401.*
 
 USB SERIAL BELKIN F5U103 DRIVER
-P:      William Greathouse
-M:      wgreathouse@smva.com
+M:      William Greathouse <wgreathouse@smva.com>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/serial/belkin_sa.*
 
 USB SERIAL CYPRESS M8 DRIVER
-P:      Lonnie Mendez
-M:      dignome@gmail.com
+M:      Lonnie Mendez <dignome@gmail.com>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 W:      http://geocities.com/i0xox0i
@@ -6122,23 +5281,20 @@ W:	http://firstlight.net/cvs
 F:      drivers/usb/serial/cypress_m8.*
 
 USB SERIAL CYBERJACK DRIVER
-P:      Matthias Bruestle and Harald Welte
-M:      support@reiner-sct.com
+M:      Matthias Bruestle and Harald Welte <support@reiner-sct.com>
 W:      http://www.reiner-sct.de/support/treiber_cyberjack.php
 S:      Maintained
 F:      drivers/usb/serial/cyberjack.c
 
 USB SERIAL DIGI ACCELEPORT DRIVER
-P:      Peter Berger and Al Borchers
-M:      pberger@brimson.com
-M:      alborchers@steinerpoint.com
+M:      Peter Berger <pberger@brimson.com>
+M:      Al Borchers <alborchers@steinerpoint.com>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-P:      Greg Kroah-Hartman
-M:      gregkh@suse.de
+M:      Greg Kroah-Hartman <gregkh@suse.de>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 F:      Documentation/usb/usb-serial.txt
@@ -6147,38 +5303,33 @@ F:	drivers/usb/serial/usb-serial.c
 F:      include/linux/usb/serial.h
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P:      Gary Brubaker
-M:      xavyer@ix.netcom.com
+M:      Gary Brubaker <xavyer@ix.netcom.com>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-P:      Greg Kroah-Hartman
-M:      greg@kroah.com
+M:      Greg Kroah-Hartman <greg@kroah.com>
 L:      linux-usb@vger.kernel.org
 W:      http://www.kroah.com/linux/
 S:      Maintained
 F:      drivers/usb/serial/*keyspan*
 
 USB SERIAL WHITEHEAT DRIVER
-P:      Support Department
-M:      support@connecttech.com
+M:      Support Department <support@connecttech.com>
 L:      linux-usb@vger.kernel.org
 W:      http://www.connecttech.com
 S:      Supported
 F:      drivers/usb/serial/whiteheat*
 
 USB SMSC95XX ETHERNET DRIVER
-P:      Steve Glendinning
-M:      steve.glendinning@smsc.com
+M:      Steve Glendinning <steve.glendinning@smsc.com>
 L:      netdev@vger.kernel.org
 S:      Supported
 F:      drivers/net/usb/smsc95xx.*
 
 USB SN9C1xx DRIVER
-P:      Luca Risolia
-M:      luca.risolia@studio.unibo.it
+M:      Luca Risolia <luca.risolia@studio.unibo.it>
 L:      linux-usb@vger.kernel.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6188,8 +5339,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:      drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-P:      Greg Kroah-Hartman
-M:      gregkh@suse.de
+M:      Greg Kroah-Hartman <gregkh@suse.de>
 L:      linux-usb@vger.kernel.org
 W:      http://www.linux-usb.org
 T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -6201,15 +5351,13 @@ F:	include/linux/usb.h
 F:      include/linux/usb/
 
 USB UHCI DRIVER
-P:      Alan Stern
-M:      stern@rowland.harvard.edu
+M:      Alan Stern <stern@rowland.harvard.edu>
 L:      linux-usb@vger.kernel.org
 S:      Maintained
 F:      drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-P:      David Brownell
-M:      dbrownell@users.sourceforge.net
+M:      David Brownell <dbrownell@users.sourceforge.net>
 L:      netdev@vger.kernel.org
 W:      http://www.linux-usb.org/usbnet
 S:      Maintained
@@ -6217,8 +5365,7 @@ F:	drivers/net/usb/usbnet.c
 F:      include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-P:      Laurent Pinchart
-M:      laurent.pinchart@skynet.be
+M:      Laurent Pinchart <laurent.pinchart@skynet.be>
 L:      linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6227,8 +5374,7 @@ S:	Maintained
 F:      drivers/media/video/uvc/
 
 USB W996[87]CF DRIVER
-P:      Luca Risolia
-M:      luca.risolia@studio.unibo.it
+M:      Luca Risolia <luca.risolia@studio.unibo.it>
 L:      linux-usb@vger.kernel.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6238,21 +5384,18 @@ F:	Documentation/video4linux/w9968cf.txt
 F:      drivers/media/video/w996*
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P:      Jussi Kivilinna
-M:      jussi.kivilinna@mbnet.fi
+M:      Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
 L:      linux-wireless@vger.kernel.org
 S:      Maintained
 F:      drivers/net/wireless/rndis_wlan.c
 
 USB XHCI DRIVER
-P:      Sarah Sharp
-M:      sarah.a.sharp@intel.com
+M:      Sarah Sharp <sarah.a.sharp@intel.com>
 L:      linux-usb@vger.kernel.org
 S:      Supported
 
 USB ZC0301 DRIVER
-P:      Luca Risolia
-M:      luca.risolia@studio.unibo.it
+M:      Luca Risolia <luca.risolia@studio.unibo.it>
 L:      linux-usb@vger.kernel.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6262,16 +5405,14 @@ F:	Documentation/video4linux/zc0301.txt
 F:      drivers/media/video/zc0301/
 
 USB ZD1201 DRIVER
-P:      Jeroen Vreeken
-M:      pe1rxq@amsat.org
+M:      Jeroen Vreeken <pe1rxq@amsat.org>
 L:      linux-usb@vger.kernel.org
 W:      http://linux-lc100020.sourceforge.net
 S:      Maintained
 F:      drivers/net/wireless/zd1201.*
 
 USB ZR364XX DRIVER
-P:      Antoine Jacquet
-M:      royale@zerezo.com
+M:      Antoine Jacquet <royale@zerezo.com>
 L:      linux-usb@vger.kernel.org
 L:      linux-media@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6281,8 +5422,7 @@ F:	Documentation/video4linux/zr364xx.txt
 F:      drivers/media/video/zr364xx.c
 
 USER-MODE LINUX (UML)
-P:      Jeff Dike
-M:      jdike@addtoit.com
+M:      Jeff Dike <jdike@addtoit.com>
 L:      user-mode-linux-devel@lists.sourceforge.net
 L:      user-mode-linux-user@lists.sourceforge.net
 W:      http://user-mode-linux.sourceforge.net
@@ -6293,26 +5433,22 @@ F:	fs/hostfs/
 F:      fs/hppfs/
 
 USERSPACE I/O (UIO)
-P:      Hans J. Koch
-M:      hjk@linutronix.de
-P:      Greg Kroah-Hartman
-M:      gregkh@suse.de
+M:      "Hans J. Koch" <hjk@linutronix.de>
+M:      Greg Kroah-Hartman <gregkh@suse.de>
 S:      Maintained
 F:      Documentation/DocBook/uio-howto.tmpl
 F:      drivers/uio/
 F:      include/linux/uio*.h
 
 UTIL-LINUX-NG PACKAGE
-P:      Karel Zak
-M:      kzak@redhat.com
+M:      Karel Zak <kzak@redhat.com>
 L:      util-linux-ng@vger.kernel.org
 W:      http://kernel.org/~kzak/util-linux-ng/
 T:      git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
 S:      Maintained
 
 UVESAFB DRIVER
-P:      Michal Januszewski
-M:      spock@gentoo.org
+M:      Michal Januszewski <spock@gentoo.org>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:      http://dev.gentoo.org/~spock/projects/uvesafb/
 S:      Maintained
@@ -6320,53 +5456,44 @@ F:	Documentation/fb/uvesafb.txt
 F:      drivers/video/uvesafb.*
 
 VFAT/FAT/MSDOS FILESYSTEM
-P:      OGAWA Hirofumi
-M:      hirofumi@mail.parknet.co.jp
+M:      OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
 S:      Maintained
 F:      Documentation/filesystems/vfat.txt
 F:      fs/fat/
 
 VIA RHINE NETWORK DRIVER
-P:      Roger Luethi
-M:      rl@hellgate.ch
+M:      Roger Luethi <rl@hellgate.ch>
 S:      Maintained
 F:      drivers/net/via-rhine.c
 
 VIAPRO SMBUS DRIVER
-P:      Jean Delvare
-M:      khali@linux-fr.org
+M:      Jean Delvare <khali@linux-fr.org>
 L:      linux-i2c@vger.kernel.org
 S:      Maintained
 F:      Documentation/i2c/busses/i2c-viapro
 F:      drivers/i2c/busses/i2c-viapro.c
 
 VIA SD/MMC CARD CONTROLLER DRIVER
-P:      Joseph Chan
-M:      JosephChan@via.com.tw
-P:      Harald Welte
-M:      HaraldWelte@viatech.com
+M:      Joseph Chan <JosephChan@via.com.tw>
+M:      Harald Welte <HaraldWelte@viatech.com>
 S:      Maintained
 F:      drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P:      Joseph Chan
-M:      JosephChan@via.com.tw
-P:      Scott Fang
-M:      ScottFang@viatech.com.cn
+M:      Joseph Chan <JosephChan@via.com.tw>
+M:      Scott Fang <ScottFang@viatech.com.cn>
 L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:      Maintained
 F:      drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
-P:      Francois Romieu
-M:      romieu@fr.zoreil.com
+M:      Francois Romieu <romieu@fr.zoreil.com>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/via-velocity.*
 
 VLAN (802.1Q)
-P:      Patrick McHardy
-M:      kaber@trash.net
+M:      Patrick McHardy <kaber@trash.net>
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/net/macvlan.c
@@ -6374,18 +5501,15 @@ F:	include/linux/if_*vlan.h
 F:      net/8021q/
 
 VLYNQ BUS
-P:      Florian Fainelli
-M:      florian@openwrt.org
+M:      Florian Fainelli <florian@openwrt.org>
 L:      openwrt-devel@lists.openwrt.org
 S:      Maintained
 F:      drivers/vlynq/vlynq.c
 F:      include/linux/vlynq.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P:      Liam Girdwood
-M:      lrg@slimlogic.co.uk
-P:      Mark Brown
-M:      broonie@opensource.wolfsonmicro.com
+M:      Liam Girdwood <lrg@slimlogic.co.uk>
+M:      Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:      http://opensource.wolfsonmicro.com/node/15
 W:      http://www.slimlogic.co.uk/?p=48
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@ -6394,52 +5518,45 @@ F:	drivers/regulator/
 F:      include/linux/regulator/
 
 VT1211 HARDWARE MONITOR DRIVER
-P:      Juerg Haefliger
-M:      juergh@gmail.com
+M:      Juerg Haefliger <juergh@gmail.com>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/vt1211
 F:      drivers/hwmon/vt1211.c
 
 VT8231 HARDWARE MONITOR DRIVER
-P:      Roger Lucas
-M:      vt8231@hiddenengine.co.uk
+M:      Roger Lucas <vt8231@hiddenengine.co.uk>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      drivers/hwmon/vt8231.c
 
 W1 DALLAS'S 1-WIRE BUS
-P:      Evgeniy Polyakov
-M:      johnpol@2ka.mipt.ru
+M:      Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 S:      Maintained
 F:      Documentation/w1/
 F:      drivers/w1/
 
 W83791D HARDWARE MONITORING DRIVER
-P:      Marc Hulsman
-M:      m.hulsman@tudelft.nl
+M:      Marc Hulsman <m.hulsman@tudelft.nl>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/w83791d
 F:      drivers/hwmon/w83791d.c
 
 W83793 HARDWARE MONITORING DRIVER
-P:      Rudolf Marek
-M:      r.marek@assembler.cz
+M:      Rudolf Marek <r.marek@assembler.cz>
 L:      lm-sensors@lm-sensors.org
 S:      Maintained
 F:      Documentation/hwmon/w83793
 F:      drivers/hwmon/w83793.c
 
 W83L51xD SD/MMC CARD INTERFACE DRIVER
-P:      Pierre Ossman
-M:      pierre@ossman.eu
+M:      Pierre Ossman <pierre@ossman.eu>
 S:      Maintained
 F:      drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
-P:      Wim Van Sebroeck
-M:      wim@iguana.be
+M:      Wim Van Sebroeck <wim@iguana.be>
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:      Maintained
 F:      Documentation/watchdog/
@@ -6447,8 +5564,7 @@ F:	drivers/watchdog/
 F:      include/linux/watchdog.h
 
 WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P:      Jean Tourrilhes
-M:      jt@hpl.hp.com
+M:      Jean Tourrilhes <jt@hpl.hp.com>
 L:      linux-wireless@vger.kernel.org
 W:      http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
 S:      Maintained
@@ -6456,46 +5572,39 @@ F:	Documentation/networking/wavelan.txt
 F:      drivers/net/wireless/wavelan*
 
 WD7000 SCSI DRIVER
-P:      Miroslav Zagorac
-M:      zaga@fly.cc.fer.hr
+M:      Miroslav Zagorac <zaga@fly.cc.fer.hr>
 L:      linux-scsi@vger.kernel.org
 S:      Maintained
 F:      drivers/scsi/wd7000.c
 
 WIMAX STACK
-P:      Inaky Perez-Gonzalez
-M:      inaky.perez-gonzalez@intel.com
+M:      Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:      linux-wimax@intel.com
 L:      wimax@linuxwimax.org
 S:      Supported
 W:      http://linuxwimax.org
 
 WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P:      David Vrabel
-M:      david.vrabel@csr.com
+M:      David Vrabel <david.vrabel@csr.com>
 S:      Maintained
 F:      include/linux/wlp.h
 F:      drivers/uwb/wlp/
 
 WISTRON LAPTOP BUTTON DRIVER
-P:      Miloslav Trmac
-M:      mitr@volny.cz
+M:      Miloslav Trmac <mitr@volny.cz>
 S:      Maintained
 F:      drivers/input/misc/wistron_btns.c
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
-P:      Arnaldo Carvalho de Melo
-M:      acme@ghostprotocols.net
+M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:      linux-wireless@vger.kernel.org
 W:      http://oops.ghostprotocols.net:81/blog
 S:      Maintained
 F:      drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-P:      Mark Brown
-M:      broonie@opensource.wolfsonmicro.com
-P:      Liam Girdwood
-M:      lrg@slimlogic.co.uk
+M:      Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:      Liam Girdwood <lrg@slimlogic.co.uk>
 L:      linux-input@vger.kernel.org
 T:      git git://opensource.wolfsonmicro.com/linux-2.6-touch
 W:      http://opensource.wolfsonmicro.com/node/7
@@ -6504,8 +5613,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:      include/linux/wm97xx.h
 
 X.25 NETWORK LAYER
-P:      Henner Eisen
-M:      eis@baty.hanse.de
+M:      Henner Eisen <eis@baty.hanse.de>
 L:      linux-x25@vger.kernel.org
 S:      Maintained
 F:      Documentation/networking/x25*
@@ -6513,12 +5621,9 @@ F:	include/net/x25*
 F:      net/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P:      Thomas Gleixner
-M:      tglx@linutronix.de
-P:      Ingo Molnar
-M:      mingo@redhat.com
-P:      H. Peter Anvin
-M:      hpa@zytor.com
+M:      Thomas Gleixner <tglx@linutronix.de>
+M:      Ingo Molnar <mingo@redhat.com>
+M:      "H. Peter Anvin" <hpa@zytor.com>
 M:      x86@kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:      Maintained
@@ -6526,10 +5631,8 @@ F:	Documentation/x86/
 F:      arch/x86/
 
 XEN HYPERVISOR INTERFACE
-P:      Jeremy Fitzhardinge
-M:      jeremy@xensource.com
-P:      Chris Wright
-M:      chrisw@sous-sol.org
+M:      Jeremy Fitzhardinge <jeremy@xensource.com>
+M:      Chris Wright <chrisw@sous-sol.org>
 L:      virtualization@lists.osdl.org
 L:      xen-devel@lists.xensource.com
 S:      Supported
@@ -6541,8 +5644,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:      Silicon Graphics Inc
-P:      Felix Blyakher
-M:      felixb@sgi.com
+M:      Felix Blyakher <felixb@sgi.com>
 M:      xfs-masters@oss.sgi.com
 L:      xfs@oss.sgi.com
 W:      http://oss.sgi.com/projects/xfs
@@ -6552,38 +5654,33 @@ F:	Documentation/filesystems/xfs.txt
 F:      fs/xfs/
 
 XILINX SYSTEMACE DRIVER
-P:      Grant Likely
-M:      grant.likely@secretlab.ca
+M:      Grant Likely <grant.likely@secretlab.ca>
 W:      http://www.secretlab.ca/
 S:      Maintained
 F:      drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER
-P:      Peter Korsgaard
-M:      jacmet@sunsite.dk
+M:      Peter Korsgaard <jacmet@sunsite.dk>
 L:      linux-serial@vger.kernel.org
 S:      Maintained
 F:      drivers/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
-P:      Jean-Paul Roubelat
-M:      jpr@f6fbb.org
+M:      Jean-Paul Roubelat <jpr@f6fbb.org>
 L:      linux-hams@vger.kernel.org
 S:      Maintained
 F:      drivers/net/hamradio/yam*
 F:      include/linux/yam.h
 
 YEALINK PHONE DRIVER
-P:      Henk Vergonet
-M:      Henk.Vergonet@gmail.com
+M:      Henk Vergonet <Henk.Vergonet@gmail.com>
 L:      usbb2k-api-dev@nongnu.org
 S:      Maintained
 F:      Documentation/input/yealink.txt
 F:      drivers/input/misc/yealink.*
 
 Z8530 DRIVER FOR AX.25
-P:      Joerg Reuter
-M:      jreuter@yaina.de
+M:      Joerg Reuter <jreuter@yaina.de>
 W:      http://yaina.de/jreuter/
 W:      http://www.qsl.net/dl1bke/
 L:      linux-hams@vger.kernel.org
@@ -6593,10 +5690,8 @@ F:	drivers/net/hamradio/*scc.c
 F:      drivers/net/hamradio/z8530.h
 
 ZD1211RW WIRELESS DRIVER
-P:      Daniel Drake
-M:      dsd@gentoo.org
-P:      Ulrich Kunitz
-M:      kune@deine-taler.de
+M:      Daniel Drake <dsd@gentoo.org>
+M:      Ulrich Kunitz <kune@deine-taler.de>
 W:      http://zd1211.ath.cx/wiki/DriverRewrite
 L:      linux-wireless@vger.kernel.org
 L:      zd1211-devs@lists.sourceforge.net (subscribers-only)
@@ -6612,14 +5707,12 @@ S:	Odd Fixes
 F:      drivers/media/video/zoran/
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
-P:      Maciej W. Rozycki
-M:      macro@linux-mips.org
+M:      "Maciej W. Rozycki" <macro@linux-mips.org>
 S:      Maintained
 F:      drivers/serial/zs.*
 
 THE REST
-P:      Linus Torvalds
-M:      torvalds@linux-foundation.org
+M:      Linus Torvalds <torvalds@linux-foundation.org>
 L:      linux-kernel@vger.kernel.org
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 S:      Buried alive in reporters
diff --git a/Makefile b/Makefile
index 0aeec59c1f0a..0d46615bffe5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -343,7 +343,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common \
                    -Werror-implicit-function-declaration \
-                   -Wno-format-security
+                   -Wno-format-security \
+                   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -565,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS   += $(call cc-option,-fwrapv)
+KBUILD_CFLAGS   += $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS   += $(call cc-option,-fno-dwarf2-cfi-asm)
diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
index c13636575fba..42866759f3fa 100644
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)                        pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)                        pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)               pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)               pmd_free((tlb)->mm, pmd)
  
 #endif
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index 1e9ad52c460e..e072041d19f8 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5d60508472f0..d778a699f577 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
         depends on GENERIC_CLOCKEVENTS
         default y if SMP && !LOCAL_TIMERS
 
-config MMU
-        bool
-        default y
-
 config NO_IOPORT
         bool
 
@@ -126,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
         bool
 
+config ARCH_HAS_CPUFREQ
+        bool
+        help
+          Internal node to signify that the ARCH has CPUFREQ support
+          and that the relevant menu configurations are displayed for
+          it.
+
 config GENERIC_HWEIGHT
         bool
         default y
@@ -188,6 +191,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+        bool "MMU-based Paged Memory Management Support"
+        default y
+        help
+          Select if you want MMU-based virtualised addressing space
+          support by paged memory management. If unsure, say 'Y'.
+
 choice
         prompt "ARM system type"
         default ARCH_VERSATILE
@@ -203,6 +213,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
         bool "ARM Ltd. Integrator family"
         select ARM_AMBA
+        select ARCH_HAS_CPUFREQ
         select HAVE_CLK
         select COMMON_CLKDEV
         select ICST525
@@ -329,6 +340,20 @@ config ARCH_H720X
         help
           This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+        bool "STMicroelectronics Nomadik"
+        select ARM_AMBA
+        select ARM_VIC
+        select CPU_ARM926T
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        select GENERIC_GPIO
+        select ARCH_REQUIRE_GPIOLIB
+        help
+          Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
         bool "IOP13xx-based"
         depends on MMU
@@ -519,6 +544,7 @@ config ARCH_PXA
         bool "PXA2xx/PXA3xx-based"
         depends on MMU
         select ARCH_MTD_XIP
+        select ARCH_HAS_CPUFREQ
         select GENERIC_GPIO
         select HAVE_CLK
         select COMMON_CLKDEV
@@ -561,6 +587,7 @@ config ARCH_SA1100
         select ISA
         select ARCH_SPARSEMEM_ENABLE
         select ARCH_MTD_XIP
+        select ARCH_HAS_CPUFREQ
         select GENERIC_GPIO
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
@@ -573,6 +600,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
         bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
         select GENERIC_GPIO
+        select ARCH_HAS_CPUFREQ
         select HAVE_CLK
         help
           Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -583,9 +611,18 @@ config ARCH_S3C64XX
         bool "Samsung S3C64XX"
         select GENERIC_GPIO
         select HAVE_CLK
+        select ARCH_HAS_CPUFREQ
         help
           Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+        bool "Samsung S5PC1XX"
+        select GENERIC_GPIO
+        select HAVE_CLK
+        select CPU_V7
+        help
+          Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
         bool "Shark"
         select CPU_SA110
@@ -642,6 +679,7 @@ config ARCH_OMAP
         select GENERIC_GPIO
         select HAVE_CLK
         select ARCH_REQUIRE_GPIOLIB
+        select ARCH_HAS_CPUFREQ
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
         help
@@ -707,6 +745,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -724,6 +763,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
@@ -738,6 +781,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
@@ -986,18 +1031,7 @@ config LOCAL_TIMERS
           accounting to be spread across the timer interval, preventing a
           "thundering herd" at every timer tick.
 
-config PREEMPT
-        bool "Preemptible Kernel (EXPERIMENTAL)"
-        depends on EXPERIMENTAL
-        help
-          This option reduces the latency of the kernel when reacting to
-          real-time or interactive events by allowing a low priority process to
-          be preempted even if it is in kernel mode executing a system call.
-          This allows applications to run more reliably even when the system is
-          under load.
-
-          Say Y here if you are building a kernel for a desktop, embedded
-          or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
         int
@@ -1007,6 +1041,21 @@ config HZ
         default AT91_TIMER_HZ if ARCH_AT91
         default 100
 
+config THUMB2_KERNEL
+        bool "Compile the kernel in Thumb-2 mode"
+        depends on CPU_V7 && EXPERIMENTAL
+        select AEABI
+        select ARM_ASM_UNIFIED
+        help
+          By enabling this option, the kernel will be compiled in
+          Thumb-2 mode. A compiler/assembler that understand the unified
+          ARM-Thumb syntax is needed.
+
+          If unsure, say N.
+
+config ARM_ASM_UNIFIED
+        bool
+
 config AEABI
         bool "Use the ARM EABI to compile the kernel"
         help
@@ -1270,7 +1319,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1305,6 +1354,52 @@ config CPU_FREQ_S3C64XX
         bool "CPUfreq support for Samsung S3C64XX CPUs"
         depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+        bool
+        help
+          Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+        bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+        depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+        select CPU_FREQ_S3C
+        help
+          This enables the CPUfreq driver for the Samsung S3C24XX family
+          of CPUs.
+
+          For details, take a look at <file:Documentation/cpu-freq>.
+
+          If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+        bool "Support CPUfreq changing of PLL frequency"
+        depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+        help
+          Compile in support for changing the PLL frequency from the
+          S3C24XX series CPUfreq driver. The PLL takes time to settle
+          after a frequency change, so by default it is not enabled.
+
+          This also means that the PLL tables for the selected CPU(s) will
+          be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+        bool "Debug CPUfreq Samsung driver core"
+        depends on CPU_FREQ_S3C24XX
+        help
+          Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+        bool "Debug CPUfreq Samsung driver IO timing"
+        depends on CPU_FREQ_S3C24XX
+        help
+          Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+        bool "Export debugfs for CPUFreq"
+        depends on CPU_FREQ_S3C24XX && DEBUG_FS
+        help
+          Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
@@ -1406,107 +1501,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f0..1a6f70e52921 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
         bool
+        depends on !THUMB2_KERNEL
         default y if !ARM_UNWIND
         help
           If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b9ae98b88a7e..7350557a81e0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI      +=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT   :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN   :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2   :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2   :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS   +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS   +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_CFLAGS   +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS   +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS      += -D__arm__
 
@@ -136,8 +143,10 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)          := mv78xx0
 machine-$(CONFIG_ARCH_MX1)              := mx1
 machine-$(CONFIG_ARCH_MX2)              := mx2
+machine-$(CONFIG_ARCH_MX25)             := mx25
 machine-$(CONFIG_ARCH_MX3)              := mx3
 machine-$(CONFIG_ARCH_NETX)             := netx
+machine-$(CONFIG_ARCH_NOMADIK)          := nomadik
 machine-$(CONFIG_ARCH_NS9XXX)           := ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)            := omap1
 machine-$(CONFIG_ARCH_OMAP2)            := omap2
@@ -151,6 +160,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)          := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)          := s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)          := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)          := s5pc100
 machine-$(CONFIG_ARCH_SA1100)           := sa1100
 machine-$(CONFIG_ARCH_SHARK)            := shark
 machine-$(CONFIG_ARCH_STMP378X)         := stmp378x
@@ -159,6 +169,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)        := versatile
 machine-$(CONFIG_ARCH_W90X900)          := w90x900
 machine-$(CONFIG_FOOTBRIDGE)            := footbridge
+machine-$(CONFIG_ARCH_MXC91231)         := mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -169,6 +180,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)         := pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)     := s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)     := s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)    := stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d0..4a590f4113e2 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-                   -C none -a $(LOADADDR) -e $(LOADADDR) \
+                   -C none -a $(LOADADDR) -e $(STARTADDR) \
                    -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:  $(obj)/zImage FORCE
         $(call if_changed,uimage)
         @echo '  Image $@ is ready'
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c5345..fa6fbf45cf3b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
                 tst     r2, #3                  @ not user?
                 bne     not_angel
                 mov     r0, #0x17               @ angel_SWIreason_EnterSVC
-                swi     0x123456                @ angel_SWI_ARM
+ ARM(           swi     0x123456        )       @ angel_SWI_ARM
+ THUMB(         svc     0xab            )       @ angel_SWI_THUMB
 not_angel:
                 mrs     r2, cpsr                @ turn off interrupts to
                 orr     r2, r2, #0xc0           @ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
                 .text
                 adr     r0, LC0
-                ldmia   r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(           ldmia   r0, {r1, r2, r3, r4, r5, r6, ip, sp}    )
+ THUMB(         ldmia   r0, {r1, r2, r3, r4, r5, r6, ip}        )
+ THUMB(         ldr     sp, [r0, #28]                           )
                 subs    r0, r0, r1              @ calculate the delta offset
 
                                                 @ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
                 add     r1, r5, r0              @ end of decompressed kernel
                 adr     r2, reloc_start
                 ldr     r3, LC1
                 add     r3, r2, r3
-1:              ldmia   r2!, {r9 - r14}         @ copy relocation code
-                stmia   r1!, {r9 - r14}
-                ldmia   r2!, {r9 - r14}
-                stmia   r1!, {r9 - r14}
+1:              ldmia   r2!, {r9 - r12, r14}    @ copy relocation code
+                stmia   r1!, {r9 - r12, r14}
+                ldmia   r2!, {r9 - r12, r14}
+                stmia   r1!, {r9 - r12, r14}
                 cmp     r2, r3
                 blo     1b
-                add     sp, r1, #128            @ relocate the stack
+                mov     sp, r1
+                add     sp, sp, #128            @ relocate the stack
 
                 bl      cache_clean_flush
-                add     pc, r5, r0              @ call relocation code
+ ARM(           add     pc, r5, r0              ) @ call relocation code
+ THUMB(         add     r12, r5, r0             )
+ THUMB(         mov     pc, r12                 ) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -291,6 +297,7 @@ wont_overwrite:	mov	r0, r4
                 bl      decompress_kernel
                 b       call_kernel
 
+                .align  2
                 .type   LC0, #object
 LC0:            .word   LC0                     @ r1
                 .word   __bss_start             @ r2
@@ -431,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
                 mov     r12, lr
+#ifdef CONFIG_MMU
                 bl      __setup_mmu
                 mov     r0, #0
                 mcr     p15, 0, r0, c7, c10, 4  @ drain write buffer
@@ -444,10 +452,12 @@ __armv4_mmu_cache_on:
                 bl      __common_mmu_cache_on
                 mov     r0, #0
                 mcr     p15, 0, r0, c8, c7, 0   @ flush I,D TLBs
+#endif
                 mov     pc, r12
 
 __armv7_mmu_cache_on:
                 mov     r12, lr
+#ifdef CONFIG_MMU
                 mrc     p15, 0, r11, c0, c1, 4  @ read ID_MMFR0
                 tst     r11, #0xf               @ VMSA
                 blne    __setup_mmu
@@ -455,9 +465,11 @@ __armv7_mmu_cache_on:
                 mcr     p15, 0, r0, c7, c10, 4  @ drain write buffer
                 tst     r11, #0xf               @ VMSA
                 mcrne   p15, 0, r0, c8, c7, 0   @ flush I,D TLBs
+#endif
                 mrc     p15, 0, r0, c1, c0, 0   @ read control reg
                 orr     r0, r0, #0x5000         @ I-cache enable, RR cache replacement
                 orr     r0, r0, #0x003c         @ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
                 orr     r0, r0, #1 << 25        @ big-endian page tables
 #endif
@@ -465,6 +477,7 @@ __armv7_mmu_cache_on:
                 movne   r1, #-1
                 mcrne   p15, 0, r3, c2, c0, 0   @ load page table pointer
                 mcrne   p15, 0, r1, c3, c0, 0   @ load domain access control
+#endif
                 mcr     p15, 0, r0, c1, c0, 0   @ load control register
                 mrc     p15, 0, r0, c1, c0, 0   @ and read it back
                 mov     r0, #0
@@ -498,6 +511,7 @@ __arm6_mmu_cache_on:
                 mov     pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
                 orr     r0, r0, #0x000d         @ Write buffer, mmu
 #endif
@@ -509,6 +523,7 @@ __common_mmu_cache_on:
 1:              mcr     p15, 0, r0, c1, c0, 0   @ load control register
                 mrc     p15, 0, r0, c1, c0, 0   @ and read it back to
                 sub     pc, lr, r0, lsr #32     @ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -522,7 +537,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
                 .align  5
 reloc_start:    add     r9, r5, r0
@@ -531,13 +546,14 @@ reloc_start:	add	r9, r5, r0
                 mov     r1, r4
 1:
                 .rept   4
-                ldmia   r5!, {r0, r2, r3, r10 - r14}    @ relocate kernel
-                stmia   r1!, {r0, r2, r3, r10 - r14}
+                ldmia   r5!, {r0, r2, r3, r10 - r12, r14}       @ relocate kernel
+                stmia   r1!, {r0, r2, r3, r10 - r12, r14}
                 .endr
 
                 cmp     r5, r9
                 blo     1b
-                add     sp, r1, #128            @ relocate the stack
+                mov     sp, r1
+                add     sp, sp, #128            @ relocate the stack
                 debug_reloc_end
 
 call_kernel:    bl      cache_clean_flush
@@ -571,7 +587,9 @@ call_cache_fn:	adr	r12, proc_types
                 ldr     r2, [r12, #4]           @ get mask
                 eor     r1, r1, r6              @ (real ^ match)
                 tst     r1, r2                  @       & mask
-                addeq   pc, r12, r3             @ call cache function
+ ARM(           addeq   pc, r12, r3             ) @ call cache function
+ THUMB(         addeq   r12, r3                 )
+ THUMB(         moveq   pc, r12                 ) @ call cache function
                 add     r12, r12, #4*5
                 b       1b
 
@@ -589,13 +607,15 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+                .align  2
                 .type   proc_types,#object
 proc_types:
                 .word   0x41560600              @ ARM6/610
                 .word   0xffffffe0
-                b       __arm6_mmu_cache_off    @ works, but slow
-                b       __arm6_mmu_cache_off
+                W(b)    __arm6_mmu_cache_off    @ works, but slow
+                W(b)    __arm6_mmu_cache_off
                 mov     pc, lr
+ THUMB(         nop                             )
 @               b       __arm6_mmu_cache_on             @ untested
 @               b       __arm6_mmu_cache_off
 @               b       __armv3_mmu_cache_flush
@@ -603,76 +623,84 @@ proc_types:
                 .word   0x00000000              @ old ARM ID
                 .word   0x0000f000
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
 
                 .word   0x41007000              @ ARM7/710
                 .word   0xfff8fe00
-                b       __arm7_mmu_cache_off
-                b       __arm7_mmu_cache_off
+                W(b)    __arm7_mmu_cache_off
+                W(b)    __arm7_mmu_cache_off
                 mov     pc, lr
+ THUMB(         nop                             )
 
                 .word   0x41807200              @ ARM720T (writethrough)
                 .word   0xffffff00
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
                 mov     pc, lr
+ THUMB(         nop                             )
 
                 .word   0x41007400              @ ARM74x
                 .word   0xff00ff00
-                b       __armv3_mpu_cache_on
-                b       __armv3_mpu_cache_off
-                b       __armv3_mpu_cache_flush
+                W(b)    __armv3_mpu_cache_on
+                W(b)    __armv3_mpu_cache_off
+                W(b)    __armv3_mpu_cache_flush
                 
                 .word   0x41009400              @ ARM94x
                 .word   0xff00ff00
-                b       __armv4_mpu_cache_on
-                b       __armv4_mpu_cache_off
-                b       __armv4_mpu_cache_flush
+                W(b)    __armv4_mpu_cache_on
+                W(b)    __armv4_mpu_cache_off
+                W(b)    __armv4_mpu_cache_flush
 
                 .word   0x00007000              @ ARM7 IDs
                 .word   0x0000f000
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
 
                 @ Everything from here on will be the new ID system.
 
                 .word   0x4401a100              @ sa110 / sa1100
                 .word   0xffffffe0
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x6901b110              @ sa1110
                 .word   0xfffffff0
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x56056930
                 .word   0xff0ffff0              @ PXA935
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x56158000              @ PXA168
                 .word   0xfffff000
-                b __armv4_mmu_cache_on
-                b __armv4_mmu_cache_off
-                b __armv5tej_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv5tej_mmu_cache_flush
 
                 .word   0x56056930
                 .word   0xff0ffff0              @ PXA935
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x56050000              @ Feroceon
                 .word   0xff0f0000
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv5tej_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
                 /* this conflicts with the standard ARMv5TE entry */
@@ -685,47 +713,50 @@ proc_types:
 
                 .word   0x66015261              @ FA526
                 .word   0xff01fff1
-                b       __fa526_cache_on
-                b       __armv4_mmu_cache_off
-                b       __fa526_cache_flush
+                W(b)    __fa526_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __fa526_cache_flush
 
                 @ These match on the architecture ID
 
                 .word   0x00020000              @ ARMv4T
                 .word   0x000f0000
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x00050000              @ ARMv5TE
                 .word   0x000f0000
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv4_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x00060000              @ ARMv5TEJ
                 .word   0x000f0000
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv5tej_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv4_mmu_cache_flush
 
                 .word   0x0007b000              @ ARMv6
                 .word   0x000ff000
-                b       __armv4_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv6_mmu_cache_flush
+                W(b)    __armv4_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv6_mmu_cache_flush
 
                 .word   0x000f0000              @ new CPU Id
                 .word   0x000f0000
-                b       __armv7_mmu_cache_on
-                b       __armv7_mmu_cache_off
-                b       __armv7_mmu_cache_flush
+                W(b)    __armv7_mmu_cache_on
+                W(b)    __armv7_mmu_cache_off
+                W(b)    __armv7_mmu_cache_flush
 
                 .word   0                       @ unrecognised type
                 .word   0
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
                 mov     pc, lr
+ THUMB(         nop                             )
 
                 .size   proc_types, . - proc_types
 
@@ -760,22 +791,30 @@ __armv3_mpu_cache_off:
                 mov     pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
                 mrc     p15, 0, r0, c1, c0
                 bic     r0, r0, #0x000d
                 mcr     p15, 0, r0, c1, c0      @ turn MMU and cache off
                 mov     r0, #0
                 mcr     p15, 0, r0, c7, c7      @ invalidate whole cache v4
                 mcr     p15, 0, r0, c8, c7      @ invalidate whole TLB v4
+#endif
                 mov     pc, lr
 
 __armv7_mmu_cache_off:
                 mrc     p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
                 bic     r0, r0, #0x000d
+#else
+                bic     r0, r0, #0x000c
+#endif
                 mcr     p15, 0, r0, c1, c0      @ turn MMU and cache off
                 mov     r12, lr
                 bl      __armv7_mmu_cache_flush
                 mov     r0, #0
+#ifdef CONFIG_MMU
                 mcr     p15, 0, r0, c8, c7, 0   @ invalidate whole TLB
+#endif
                 mcr     p15, 0, r0, c7, c5, 6   @ invalidate BTC
                 mcr     p15, 0, r0, c7, c10, 4  @ DSB
                 mcr     p15, 0, r0, c7, c5, 4   @ ISB
@@ -852,7 +891,7 @@ __armv7_mmu_cache_flush:
                 b       iflush
 hierarchical:
                 mcr     p15, 0, r10, c7, c10, 5 @ DMB
-                stmfd   sp!, {r0-r5, r7, r9, r11}
+                stmfd   sp!, {r0-r7, r9-r11}
                 mrc     p15, 1, r0, c0, c0, 1   @ read clidr
                 ands    r3, r0, #0x7000000      @ extract loc from clidr
                 mov     r3, r3, lsr #23         @ left align loc bit field
@@ -877,8 +916,12 @@ loop1:
 loop2:
                 mov     r9, r4                  @ create working copy of max way size
 loop3:
-                orr     r11, r10, r9, lsl r5    @ factor way and cache number into r11
-                orr     r11, r11, r7, lsl r2    @ factor index number into r11
+ ARM(           orr     r11, r10, r9, lsl r5    ) @ factor way and cache number into r11
+ ARM(           orr     r11, r11, r7, lsl r2    ) @ factor index number into r11
+ THUMB(         lsl     r6, r9, r5              )
+ THUMB(         orr     r11, r10, r6            ) @ factor way and cache number into r11
+ THUMB(         lsl     r6, r7, r2              )
+ THUMB(         orr     r11, r11, r6            ) @ factor index number into r11
                 mcr     p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
                 subs    r9, r9, #1              @ decrement the way
                 bge     loop3
@@ -889,7 +932,7 @@ skip:
                 cmp     r3, r10
                 bgt     loop1
 finished:
-                ldmfd   sp!, {r0-r5, r7, r9, r11}
+                ldmfd   sp!, {r0-r7, r9-r11}
                 mov     r10, #0                 @ swith back to cache level 0
                 mcr     p15, 2, r10, c0, c0, 0  @ select current cache level in cssr
 iflush:
@@ -923,9 +966,13 @@ __armv4_mmu_cache_flush:
                 mov     r11, #8
                 mov     r11, r11, lsl r3        @ cache line size in bytes
 no_cache_id:
-                bic     r1, pc, #63             @ align to longest cache line
+                mov     r1, pc
+                bic     r1, r1, #63             @ align to longest cache line
                 add     r2, r1, r2
-1:              ldr     r3, [r1], r11           @ s/w flush D cache
+1:
+ ARM(           ldr     r3, [r1], r11           ) @ s/w flush D cache
+ THUMB(         ldr     r3, [r1]                ) @ s/w flush D cache
+ THUMB(         add     r1, r1, r11             )
                 teq     r1, r2
                 bne     1b
 
@@ -945,6 +992,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+                .align  2
                 .type   phexbuf,#object
 phexbuf:        .space  12
                 .size   phexbuf, . - phexbuf
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e908..920ced0b73c5 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,10 +22,20 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+        void __iomem *base = get_irq_chip_data(irq);
+        irq &= 31;
+        writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+        /* moreover, clear the soft-triggered, in case it was the reason */
+        writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
         void __iomem *base = get_irq_chip_data(irq);
@@ -253,12 +263,16 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
         .name   = "VIC",
-        .ack    = vic_mask_irq,
+        .ack    = vic_ack_irq,
         .mask   = vic_mask_irq,
         .unmask = vic_unmask_irq,
         .set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+                         u32 vic_sources);
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +284,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
                      u32 vic_sources, u32 resume_sources)
 {
         unsigned int i;
+        u32 cellid = 0;
+        enum amba_vendor vendor;
+
+        /* Identify which VIC cell this one is, by reading the ID */
+        for (i = 0; i < 4; i++) {
+                u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+                cellid |= (readl(addr) & 0xff) << (8 * i);
+        }
+        vendor = (cellid >> 12) & 0xff;
+        printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+               base, cellid, vendor);
+
+        switch(vendor) {
+        case AMBA_VENDOR_ST:
+                vik_init_st(base, irq_start, vic_sources);
+                return;
+        default:
+                printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+                /* fall through */
+        case AMBA_VENDOR_ARM:
+                break;
+        }
 
         /* Disable all interrupts initially. */
 
@@ -306,3 +342,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
         vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+                                u32 vic_sources)
+{
+        unsigned int i;
+        int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+        /* Disable all interrupts initially. */
+
+        writel(0, base + VIC_INT_SELECT);
+        writel(0, base + VIC_INT_ENABLE);
+        writel(~0, base + VIC_INT_ENABLE_CLEAR);
+        writel(0, base + VIC_IRQ_STATUS);
+        writel(0, base + VIC_ITCR);
+        writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+        /*
+         * Make sure we clear all existing interrupts. The vector registers
+         * in this cell are after the second block of general registers,
+         * so we can address them using standard offsets, but only from
+         * the second base address, which is 0x20 in the page
+         */
+        if (vic_2nd_block) {
+                writel(0, base + VIC_PL190_VECT_ADDR);
+                for (i = 0; i < 19; i++) {
+                        unsigned int value;
+
+                        value = readl(base + VIC_PL190_VECT_ADDR);
+                        writel(value, base + VIC_PL190_VECT_ADDR);
+                }
+                /* ST has 16 vectors as well, but we don't enable them by now */
+                for (i = 0; i < 16; i++) {
+                        void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+                        writel(0, reg);
+                }
+
+                writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+        }
+
+        for (i = 0; i < 32; i++) {
+                if (vic_sources & (1 << i)) {
+                        unsigned int irq = irq_start + i;
+
+                        set_irq_chip(irq, &vic_chip);
+                        set_irq_chip_data(irq, base);
+                        set_irq_handler(irq, handle_level_irq);
+                        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+                }
+        }
+}
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 000000000000..9bb45b932f04
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 000000000000..b0d7d3d3a5e3
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 4762d9001298..7d61ae6e75da 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b700..00f46d9ce299 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-        .macro  disable_irq
+        .macro  disable_irq_notrace
         cpsid   i
         .endm
 
-        .macro  enable_irq
+        .macro  enable_irq_notrace
         cpsie   i
         .endm
 #else
-        .macro  disable_irq
+        .macro  disable_irq_notrace
         msr     cpsr_c, #PSR_I_BIT | SVC_MODE
         .endm
 
-        .macro  enable_irq
+        .macro  enable_irq_notrace
         msr     cpsr_c, #SVC_MODE
         .endm
 #endif
 
+        .macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+        stmdb   sp!, {r0-r3, ip, lr}
+        bl      trace_hardirqs_off
+        ldmia   sp!, {r0-r3, ip, lr}
+#endif
+        .endm
+
+        .macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+        /*
+         * actually the registers should be pushed and pop'd conditionally, but
+         * after bl the flags are certainly clobbered
+         */
+        stmdb   sp!, {r0-r3, ip, lr}
+        bl\cond trace_hardirqs_on
+        ldmia   sp!, {r0-r3, ip, lr}
+#endif
+        .endm
+
+        .macro asm_trace_hardirqs_on
+        asm_trace_hardirqs_on_cond al
+        .endm
+
+        .macro disable_irq
+        disable_irq_notrace
+        asm_trace_hardirqs_off
+        .endm
+
+        .macro enable_irq
+        asm_trace_hardirqs_on
+        enable_irq_notrace
+        .endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-        .macro  restore_irqs, oldcpsr
+        .macro  restore_irqs_notrace, oldcpsr
         msr     cpsr_c, \oldcpsr
         .endm
 
+        .macro restore_irqs, oldcpsr
+        tst     \oldcpsr, #PSR_I_BIT
+        asm_trace_hardirqs_on_cond eq
+        restore_irqs_notrace \oldcpsr
+        .endm
+
 #define USER(x...)                              \
 9999:   x;                                      \
         .section __ex_table,"a";                \
@@ -127,3 +166,87 @@
 #endif
 #endif
         .endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+        .macro  setmode, mode, reg
+        mov     \reg, #\mode
+        msr     cpsr_c, \reg
+        .endm
+#else
+        .macro  setmode, mode, reg
+        msr     cpsr_c, #\mode
+        .endm
+#endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+        .macro  usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+        .if     \inc == 1
+        \instr\cond\()bt \reg, [\ptr, #\off]
+        .elseif \inc == 4
+        \instr\cond\()t \reg, [\ptr, #\off]
+        .else
+        .error  "Unsupported inc macro argument"
+        .endif
+
+        .section __ex_table,"a"
+        .align  3
+        .long   9999b, \abort
+        .previous
+        .endm
+
+        .macro  usracc, instr, reg, ptr, inc, cond, rept, abort
+        @ explicit IT instruction needed because of the label
+        @ introduced by the USER macro
+        .ifnc   \cond,al
+        .if     \rept == 1
+        itt     \cond
+        .elseif \rept == 2
+        ittt    \cond
+        .else
+        .error  "Unsupported rept macro argument"
+        .endif
+        .endif
+
+        @ Slightly optimised to avoid incrementing the pointer twice
+        usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+        .if     \rept == 2
+        usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+        .endif
+
+        add\cond \ptr, #\rept * \inc
+        .endm
+
+#else   /* !CONFIG_THUMB2_KERNEL */
+
+        .macro  usracc, instr, reg, ptr, inc, cond, rept, abort
+        .rept   \rept
+9999:
+        .if     \inc == 1
+        \instr\cond\()bt \reg, [\ptr], #\inc
+        .elseif \inc == 4
+        \instr\cond\()t \reg, [\ptr], #\inc
+        .else
+        .error  "Unsupported inc macro argument"
+        .endif
+
+        .section __ex_table,"a"
+        .align  3
+        .long   9999b, \abort
+        .previous
+        .endr
+        .endm
+
+#endif  /* CONFIG_THUMB2_KERNEL */
+
+        .macro  strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+        usracc  str, \reg, \ptr, \inc, \cond, \rept, \abort
+        .endm
+
+        .macro  ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+        usracc  ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+        .endm
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84d..c3b911ee9151 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC       43
 #define R_ARM_MOVT_ABS          44
 
+#define R_ARM_THM_CALL          10
+#define R_ARM_THM_JUMP24        30
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index d74265cffd86..103f7ee97313 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de8..bfcc15929a7f 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
         __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
         "1:     ldrt    %0, [%3]\n"
         "       teq     %0, %1\n"
+        "       it      eq      @ explicit IT needed for the 2b label\n"
         "2:     streqt  %2, [%3]\n"
         "3:\n"
         "       .section __ex_table,\"a\"\n"
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db87449..376be1a62866 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR           (PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR           (PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea33..bcdb9291ef0c 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
         if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
                 __check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)        0
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37f..d1b162a18dcb 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b9..bbecccda76d0 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE    0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR            0x10000
+#define PT_DATA_ADDR            0x10004
+#define PT_TEXT_END_ADDR        0x10008
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e43a1e..f41a6f57cd12 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)       free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)         pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)         pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)   pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)   pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)          do { } while (0)
 
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1d..1d6bd40a4322 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)                   \
         __asm__ __volatile__(                                   \
-        "1:     strt    " __reg_oper1 ", [%1], #4\n"            \
-        "2:     strt    " __reg_oper0 ", [%1]\n"                \
+ ARM(   "1:     strt    " __reg_oper1 ", [%1], #4\n"    )       \
+ ARM(   "2:     strt    " __reg_oper0 ", [%1]\n"        )       \
+ THUMB( "1:     strt    " __reg_oper1 ", [%1]\n"        )       \
+ THUMB( "2:     strt    " __reg_oper0 ", [%1, #4]\n"    )       \
         "3:\n"                                                  \
         "       .section .fixup,\"ax\"\n"                       \
         "       .align  2\n"                                    \
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 000000000000..073e85b9b961
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+        .syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE   PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)     x
+#define W(instr)        instr.w
+#define BSYM(sym)       sym + 1
+
+#else   /* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE   0
+
+#define ARM(x...)       x
+#define THUMB(x...)
+#define W(instr)        instr
+#define BSYM(sym)       sym
+
+#endif  /* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+        .macro  it, cond
+        .endm
+        .macro  itt, cond
+        .endm
+        .macro  ite, cond
+        .endm
+        .macro  ittt, cond
+        .endm
+        .macro  itte, cond
+        .endm
+        .macro  itet, cond
+        .endm
+        .macro  itee, cond
+        .endm
+        .macro  itttt, cond
+        .endm
+        .macro  ittte, cond
+        .endm
+        .macro  ittet, cond
+        .endm
+        .macro  ittee, cond
+        .endm
+        .macro  itett, cond
+        .endm
+        .macro  itete, cond
+        .endm
+        .macro  iteet, cond
+        .endm
+        .macro  iteee, cond
+        .endm
+#else   /* !__ASSEMBLY__ */
+__asm__(
+"       .macro  it, cond\n"
+"       .endm\n"
+"       .macro  itt, cond\n"
+"       .endm\n"
+"       .macro  ite, cond\n"
+"       .endm\n"
+"       .macro  ittt, cond\n"
+"       .endm\n"
+"       .macro  itte, cond\n"
+"       .endm\n"
+"       .macro  itet, cond\n"
+"       .endm\n"
+"       .macro  itee, cond\n"
+"       .endm\n"
+"       .macro  itttt, cond\n"
+"       .endm\n"
+"       .macro  ittte, cond\n"
+"       .endm\n"
+"       .macro  ittet, cond\n"
+"       .endm\n"
+"       .macro  ittee, cond\n"
+"       .endm\n"
+"       .macro  itett, cond\n"
+"       .endm\n"
+"       .macro  itete, cond\n"
+"       .endm\n"
+"       .macro  iteet, cond\n"
+"       .endm\n"
+"       .macro  iteee, cond\n"
+"       .endm\n");
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* CONFIG_ARM_ASM_UNIFIED */
+
+#endif  /* !__ASM_UNIFIED_H */
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e546..0e627705f746 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c5000..3d727a8a23bc 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
         @
         @ routine called with r0 = irq number, r1 = struct pt_regs *
         @
-        adrne   lr, 1b
+        adrne   lr, BSYM(1b)
         bne     asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
          */
         test_for_ipi r0, r6, r5, lr
         movne   r0, sp
-        adrne   lr, 1b
+        adrne   lr, BSYM(1b)
         bne     do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
         test_for_ltirq r0, r6, r5, lr
         movne   r0, sp
-        adrne   lr, 1b
+        adrne   lr, BSYM(1b)
         bne     do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
         .macro  inv_entry, reason
         sub     sp, sp, #S_FRAME_SIZE
-        stmib   sp, {r1 - lr}
+ ARM(   stmib   sp, {r1 - lr}           )
+ THUMB( stmia   sp, {r0 - r12}          )
+ THUMB( str     sp, [sp, #S_SP]         )
+ THUMB( str     lr, [sp, #S_LR]         )
         mov     r1, #\reason
         .endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
         .macro  svc_entry, stack_hole=0
  UNWIND(.fnstart                )
  UNWIND(.save {r0 - pc}         )
-        sub     sp, sp, #(S_FRAME_SIZE + \stack_hole)
+        sub     sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX( str     r0, [sp]        )       @ temporarily saved
+ SPFIX( mov     r0, sp          )
+ SPFIX( tst     r0, #4          )       @ test original stack alignment
+ SPFIX( ldr     r0, [sp]        )       @ restored
+#else
  SPFIX( tst     sp, #4          )
- SPFIX( bicne   sp, sp, #4      )
-        stmib   sp, {r1 - r12}
+#endif
+ SPFIX( subeq   sp, sp, #4      )
+        stmia   sp, {r1 - r12}
 
         ldmia   r0, {r1 - r3}
-        add     r5, sp, #S_SP           @ here for interlock avoidance
+        add     r5, sp, #S_SP - 4       @ here for interlock avoidance
         mov     r4, #-1                 @  ""  ""      ""       ""
-        add     r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX( addne   r0, r0, #4      )
-        str     r1, [sp]                @ save the "real" r0 copied
+        add     r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX( addeq   r0, r0, #4      )
+        str     r1, [sp, #-4]!          @ save the "real" r0 copied
                                         @ from the exception stack
 
         mov     r1, lr
@@ -151,6 +161,8 @@ ENDPROC(__und_invalid)
         @  r4 - orig_r0 (see pt_regs definition in ptrace.h)
         @
         stmia   r5, {r0 - r4}
+
+        asm_trace_hardirqs_off
         .endm
 
         .align  5
@@ -196,9 +208,8 @@ __dabt_svc:
         @
         @ restore SPSR and restart the instruction
         @
-        ldr     r0, [sp, #S_PSR]
-        msr     spsr_cxsf, r0
-        ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
+        ldr     r2, [sp, #S_PSR]
+        svc_exit r2                             @ return from exception
  UNWIND(.fnend          )
 ENDPROC(__dabt_svc)
 
@@ -206,9 +217,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
         svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-        bl      trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
         get_thread_info tsk
         ldr     r8, [tsk, #TI_PREEMPT]          @ get preempt count
@@ -225,13 +233,12 @@ __irq_svc:
         tst     r0, #_TIF_NEED_RESCHED
         blne    svc_preempt
 #endif
-        ldr     r0, [sp, #S_PSR]                @ irqs are already disabled
-        msr     spsr_cxsf, r0
+        ldr     r4, [sp, #S_PSR]                @ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-        tst     r0, #PSR_I_BIT
+        tst     r4, #PSR_I_BIT
         bleq    trace_hardirqs_on
 #endif
-        ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
+        svc_exit r4                             @ return from exception
  UNWIND(.fnend          )
 ENDPROC(__irq_svc)
 
@@ -266,7 +273,7 @@ __und_svc:
         @  r0 - instruction
         @
         ldr     r0, [r2, #-4]
-        adr     r9, 1f
+        adr     r9, BSYM(1f)
         bl      call_fpe
 
         mov     r0, sp                          @ struct pt_regs *regs
@@ -280,9 +287,8 @@ __und_svc:
         @
         @ restore SPSR and restart the instruction
         @
-        ldr     lr, [sp, #S_PSR]                @ Get SVC cpsr
-        msr     spsr_cxsf, lr
-        ldmia   sp, {r0 - pc}^                  @ Restore SVC registers
+        ldr     r2, [sp, #S_PSR]                @ Get SVC cpsr
+        svc_exit r2                             @ return from exception
  UNWIND(.fnend          )
 ENDPROC(__und_svc)
 
@@ -323,9 +329,8 @@ __pabt_svc:
         @
         @ restore SPSR and restart the instruction
         @
-        ldr     r0, [sp, #S_PSR]
-        msr     spsr_cxsf, r0
-        ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
+        ldr     r2, [sp, #S_PSR]
+        svc_exit r2                             @ return from exception
  UNWIND(.fnend          )
 ENDPROC(__pabt_svc)
 
@@ -353,7 +358,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart        )
  UNWIND(.cantunwind     )       @ don't unwind the user space
         sub     sp, sp, #S_FRAME_SIZE
-        stmib   sp, {r1 - r12}
+ ARM(   stmib   sp, {r1 - r12}  )
+ THUMB( stmia   sp, {r0 - r12}  )
 
         ldmia   r0, {r1 - r3}
         add     r0, sp, #S_PC           @ here for interlock avoidance
@@ -372,7 +378,8 @@ ENDPROC(__pabt_svc)
         @ Also, separately save sp_usr and lr_usr
         @
         stmia   r0, {r2 - r4}
-        stmdb   r0, {sp, lr}^
+ ARM(   stmdb   r0, {sp, lr}^                   )
+ THUMB( store_user_sp_lr r0, r1, S_SP - S_PC    )
 
         @
         @ Enable the alignment trap while in kernel mode
@@ -383,6 +390,8 @@ ENDPROC(__pabt_svc)
         @ Clear FP to mark the first stack frame
         @
         zero_fp
+
+        asm_trace_hardirqs_off
         .endm
 
         .macro  kuser_cmpxchg_check
@@ -427,7 +436,7 @@ __dabt_usr:
         @
         enable_irq
         mov     r2, sp
-        adr     lr, ret_from_exception
+        adr     lr, BSYM(ret_from_exception)
         b       do_DataAbort
  UNWIND(.fnend          )
 ENDPROC(__dabt_usr)
@@ -437,9 +446,6 @@ __irq_usr:
         usr_entry
         kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-        bl      trace_hardirqs_off
-#endif
         get_thread_info tsk
 #ifdef CONFIG_PREEMPT
         ldr     r8, [tsk, #TI_PREEMPT]          @ get preempt count
@@ -452,7 +458,9 @@ __irq_usr:
         ldr     r0, [tsk, #TI_PREEMPT]
         str     r8, [tsk, #TI_PREEMPT]
         teq     r0, r7
-        strne   r0, [r0, -r0]
+ ARM(   strne   r0, [r0, -r0]   )
+ THUMB( movne   r0, #0          )
+ THUMB( strne   r0, [r0]        )
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
         bl      trace_hardirqs_on
@@ -476,9 +484,10 @@ __und_usr:
         @
         @  r0 - instruction
         @
-        adr     r9, ret_from_exception
-        adr     lr, __und_usr_unknown
+        adr     r9, BSYM(ret_from_exception)
+        adr     lr, BSYM(__und_usr_unknown)
         tst     r3, #PSR_T_BIT                  @ Thumb mode?
+        itet    eq                              @ explicit IT needed for the 1f label
         subeq   r4, r2, #4                      @ ARM instr at LR - 4
         subne   r4, r2, #2                      @ Thumb instr at LR - 2
 1:      ldreqt  r0, [r4]
@@ -488,7 +497,10 @@ __und_usr:
         beq     call_fpe
         @ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:      ldrht   r5, [r4], #2
+2:
+ ARM(   ldrht   r5, [r4], #2    )
+ THUMB( ldrht   r5, [r4]        )
+ THUMB( add     r4, r4, #2      )
         and     r0, r5, #0xf800                 @ mask bits 111x x... .... ....
         cmp     r0, #0xe800                     @ 32bit instruction if xx != 0
         blo     __und_usr_unknown
@@ -577,9 +589,11 @@ call_fpe:
         moveq   pc, lr
         get_thread_info r10                     @ get current thread
         and     r8, r0, #0x00000f00             @ mask out CP number
+ THUMB( lsr     r8, r8, #8              )
         mov     r7, #1
         add     r6, r10, #TI_USED_CP
-        strb    r7, [r6, r8, lsr #8]            @ set appropriate used_cp[]
+ ARM(   strb    r7, [r6, r8, lsr #8]    )       @ set appropriate used_cp[]
+ THUMB( strb    r7, [r6, r8]            )       @ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
         @ Test if we need to give access to iWMMXt coprocessors
         ldr     r5, [r10, #TI_FLAGS]
@@ -587,36 +601,38 @@ call_fpe:
         movcss  r7, r5, lsr #(TIF_USING_IWMMXT + 1)
         bcs     iwmmxt_task_enable
 #endif
-        add     pc, pc, r8, lsr #6
-        mov     r0, r0
-
-        mov     pc, lr                          @ CP#0
-        b       do_fpe                          @ CP#1 (FPE)
-        b       do_fpe                          @ CP#2 (FPE)
-        mov     pc, lr                          @ CP#3
+ ARM(   add     pc, pc, r8, lsr #6      )
+ THUMB( lsl     r8, r8, #2              )
+ THUMB( add     pc, r8                  )
+        nop
+
+        W(mov)  pc, lr                          @ CP#0
+        W(b)    do_fpe                          @ CP#1 (FPE)
+        W(b)    do_fpe                          @ CP#2 (FPE)
+        W(mov)  pc, lr                          @ CP#3
 #ifdef CONFIG_CRUNCH
         b       crunch_task_enable              @ CP#4 (MaverickCrunch)
         b       crunch_task_enable              @ CP#5 (MaverickCrunch)
         b       crunch_task_enable              @ CP#6 (MaverickCrunch)
 #else
-        mov     pc, lr                          @ CP#4
-        mov     pc, lr                          @ CP#5
-        mov     pc, lr                          @ CP#6
+        W(mov)  pc, lr                          @ CP#4
+        W(mov)  pc, lr                          @ CP#5
+        W(mov)  pc, lr                          @ CP#6
 #endif
-        mov     pc, lr                          @ CP#7
-        mov     pc, lr                          @ CP#8
-        mov     pc, lr                          @ CP#9
+        W(mov)  pc, lr                          @ CP#7
+        W(mov)  pc, lr                          @ CP#8
+        W(mov)  pc, lr                          @ CP#9
 #ifdef CONFIG_VFP
-        b       do_vfp                          @ CP#10 (VFP)
-        b       do_vfp                          @ CP#11 (VFP)
+        W(b)    do_vfp                          @ CP#10 (VFP)
+        W(b)    do_vfp                          @ CP#11 (VFP)
 #else
-        mov     pc, lr                          @ CP#10 (VFP)
-        mov     pc, lr                          @ CP#11 (VFP)
+        W(mov)  pc, lr                          @ CP#10 (VFP)
+        W(mov)  pc, lr                          @ CP#11 (VFP)
 #endif
-        mov     pc, lr                          @ CP#12
-        mov     pc, lr                          @ CP#13
-        mov     pc, lr                          @ CP#14 (Debug)
-        mov     pc, lr                          @ CP#15 (Control)
+        W(mov)  pc, lr                          @ CP#12
+        W(mov)  pc, lr                          @ CP#13
+        W(mov)  pc, lr                          @ CP#14 (Debug)
+        W(mov)  pc, lr                          @ CP#15 (Control)
 
 #ifdef CONFIG_NEON
         .align  6
@@ -667,7 +683,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
         enable_irq
         mov     r0, sp
-        adr     lr, ret_from_exception
+        adr     lr, BSYM(ret_from_exception)
         b       do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +727,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind     )
         add     ip, r1, #TI_CPU_SAVE
         ldr     r3, [r2, #TI_TP_VALUE]
-        stmia   ip!, {r4 - sl, fp, sp, lr}      @ Store most regs on stack
+ ARM(   stmia   ip!, {r4 - sl, fp, sp, lr} )    @ Store most regs on stack
+ THUMB( stmia   ip!, {r4 - sl, fp}         )    @ Store most regs on stack
+ THUMB( str     sp, [ip], #4               )
+ THUMB( str     lr, [ip], #4               )
 #ifdef CONFIG_MMU
         ldr     r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +755,12 @@ ENTRY(__switch_to)
         ldr     r0, =thread_notify_head
         mov     r1, #THREAD_NOTIFY_SWITCH
         bl      atomic_notifier_call_chain
+ THUMB( mov     ip, r4                     )
         mov     r0, r5
-        ldmia   r4, {r4 - sl, fp, sp, pc}       @ Load all regs saved previously
+ ARM(   ldmia   r4, {r4 - sl, fp, sp, pc}  )    @ Load all regs saved previously
+ THUMB( ldmia   ip!, {r4 - sl, fp}         )    @ Load all regs saved previously
+ THUMB( ldr     sp, [ip], #4               )
+ THUMB( ldr     pc, [ip]                   )
  UNWIND(.fnend          )
 ENDPROC(__switch_to)
 
@@ -772,6 +795,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB( .arm    )
 
         .macro  usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1044,7 @@ __kuser_helper_version:				@ 0xffff0ffc
         .globl  __kuser_helper_end
 __kuser_helper_end:
 
+ THUMB( .thumb  )
 
 /*
  * Vector stubs.
@@ -1054,17 +1079,23 @@ vector_\name:
         @ Prepare for SVC32 mode.  IRQs remain disabled.
         @
         mrs     r0, cpsr
-        eor     r0, r0, #(\mode ^ SVC_MODE)
+        eor     r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
         msr     spsr_cxsf, r0
 
         @
         @ the branch table must immediately follow this code
         @
         and     lr, lr, #0x0f
+ THUMB( adr     r0, 1f                  )
+ THUMB( ldr     lr, [r0, lr, lsl #2]    )
         mov     r0, sp
-        ldr     lr, [pc, lr, lsl #2]
+ ARM(   ldr     lr, [pc, lr, lsl #2]    )
         movs    pc, lr                  @ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+        .align  2
+        @ handler addresses follow this label
+1:
         .endm
 
         .globl  __stubs_start
@@ -1202,14 +1233,16 @@ __stubs_end:
 
         .globl  __vectors_start
 __vectors_start:
-        swi     SYS_ERROR0
-        b       vector_und + stubs_offset
-        ldr     pc, .LCvswi + stubs_offset
-        b       vector_pabt + stubs_offset
-        b       vector_dabt + stubs_offset
-        b       vector_addrexcptn + stubs_offset
-        b       vector_irq + stubs_offset
-        b       vector_fiq + stubs_offset
+ ARM(   swi     SYS_ERROR0      )
+ THUMB( svc     #0              )
+ THUMB( nop                     )
+        W(b)    vector_und + stubs_offset
+        W(ldr)  pc, .LCvswi + stubs_offset
+        W(b)    vector_pabt + stubs_offset
+        W(b)    vector_dabt + stubs_offset
+        W(b)    vector_addrexcptn + stubs_offset
+        W(b)    vector_irq + stubs_offset
+        W(b)    vector_fiq + stubs_offset
 
         .globl  __vectors_end
 __vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index bfa7f0af7ede..3657c5328a5b 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
         /* perform architecture specific actions before user return */
         arch_ret_to_user r1, lr
 
-        @ fast_restore_user_regs
-        ldr     r1, [sp, #S_OFF + S_PSR]        @ get calling cpsr
-        ldr     lr, [sp, #S_OFF + S_PC]!        @ get pc
-        msr     spsr_cxsf, r1                   @ save in spsr_svc
-        ldmdb   sp, {r1 - lr}^                  @ get calling r1 - lr
-        mov     r0, r0
-        add     sp, sp, #S_FRAME_SIZE - S_PC
-        movs    pc, lr                          @ return & move spsr_svc into cpsr
+        restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend          )
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
         /* perform architecture specific actions before user return */
         arch_ret_to_user r1, lr
 
-        @ slow_restore_user_regs
-        ldr     r1, [sp, #S_PSR]                @ get calling cpsr
-        ldr     lr, [sp, #S_PC]!                @ get pc
-        msr     spsr_cxsf, r1                   @ save in spsr_svc
-        ldmdb   sp, {r0 - lr}^                  @ get calling r0 - lr
-        mov     r0, r0
-        add     sp, sp, #S_FRAME_SIZE - S_PC
-        movs    pc, lr                          @ return & move spsr_svc into cpsr
+        restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -132,6 +118,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+        stmdb sp!, {r0-r3, lr}
+        ldr r0, =ftrace_trace_function
+        ldr r2, [r0]
+        adr r0, ftrace_stub
+        cmp r0, r2
+        bne gnu_trace
+        ldmia sp!, {r0-r3, ip, lr}
+        bx ip
+
+gnu_trace:
+        ldr r1, [sp, #20]                       @ lr of instrumented routine
+        mov r0, lr
+        sub r0, r0, #MCOUNT_INSN_SIZE
+        mov lr, pc
+        mov pc, r2
+        ldmia sp!, {r0-r3, ip, lr}
+        bx ip
+
 ENTRY(mcount)
         stmdb sp!, {r0-r3, lr}
         ldr r0, =ftrace_trace_function
@@ -182,8 +187,10 @@ ftrace_stub:
 ENTRY(vector_swi)
         sub     sp, sp, #S_FRAME_SIZE
         stmia   sp, {r0 - r12}                  @ Calling r0 - r12
-        add     r8, sp, #S_PC
-        stmdb   r8, {sp, lr}^                   @ Calling sp, lr
+ ARM(   add     r8, sp, #S_PC           )
+ ARM(   stmdb   r8, {sp, lr}^           )       @ Calling sp, lr
+ THUMB( mov     r8, sp                  )
+ THUMB( store_user_sp_lr r8, r10, S_SP  )       @ calling sp, lr
         mrs     r8, spsr                        @ called from non-FIQ mode, so ok.
         str     lr, [sp, #S_PC]                 @ Save calling PC
         str     r8, [sp, #S_PSR]                @ Save CPSR
@@ -272,7 +279,7 @@ ENTRY(vector_swi)
         bne     __sys_trace
 
         cmp     scno, #NR_syscalls              @ check upper syscall limit
-        adr     lr, ret_fast_syscall            @ return address
+        adr     lr, BSYM(ret_fast_syscall)      @ return address
         ldrcc   pc, [tbl, scno, lsl #2]         @ call sys_* routine
 
         add     r1, sp, #S_OFF
@@ -293,7 +300,7 @@ __sys_trace:
         mov     r0, #0                          @ trace entry [IP = 0]
         bl      syscall_trace
 
-        adr     lr, __sys_trace_return          @ return address
+        adr     lr, BSYM(__sys_trace_return)    @ return address
         mov     scno, r0                        @ syscall number (possibly new)
         add     r1, sp, #S_R0 + S_OFF           @ pointer to regs
         cmp     scno, #NR_syscalls              @ check upper syscall limit
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e157997..a4eaf4f920c5 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
 #endif
         .endm
 
-        .macro  get_thread_info, rd
-        mov     \rd, sp, lsr #13
-        mov     \rd, \rd, lsl #13
-        .endm
-
         .macro  alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
         ldr     \rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
         .endm
 
+        @
+        @ Store/load the USER SP and LR registers by switching to the SYS
+        @ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+        @ available. Should only be called from SVC mode
+        @
+        .macro  store_user_sp_lr, rd, rtemp, offset = 0
+        mrs     \rtemp, cpsr
+        eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+        msr     cpsr_c, \rtemp                  @ switch to the SYS mode
+
+        str     sp, [\rd, #\offset]             @ save sp_usr
+        str     lr, [\rd, #\offset + 4]         @ save lr_usr
+
+        eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+        msr     cpsr_c, \rtemp                  @ switch back to the SVC mode
+        .endm
+
+        .macro  load_user_sp_lr, rd, rtemp, offset = 0
+        mrs     \rtemp, cpsr
+        eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+        msr     cpsr_c, \rtemp                  @ switch to the SYS mode
+
+        ldr     sp, [\rd, #\offset]             @ load sp_usr
+        ldr     lr, [\rd, #\offset + 4]         @ load lr_usr
+
+        eor     \rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+        msr     cpsr_c, \rtemp                  @ switch back to the SVC mode
+        .endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+        .macro  svc_exit, rpsr
+        msr     spsr_cxsf, \rpsr
+        ldmia   sp, {r0 - pc}^                  @ load r0 - pc, cpsr
+        .endm
+
+        .macro  restore_user_regs, fast = 0, offset = 0
+        ldr     r1, [sp, #\offset + S_PSR]      @ get calling cpsr
+        ldr     lr, [sp, #\offset + S_PC]!      @ get pc
+        msr     spsr_cxsf, r1                   @ save in spsr_svc
+        .if     \fast
+        ldmdb   sp, {r1 - lr}^                  @ get calling r1 - lr
+        .else
+        ldmdb   sp, {r0 - lr}^                  @ get calling r0 - lr
+        .endif
+        add     sp, sp, #S_FRAME_SIZE - S_PC
+        movs    pc, lr                          @ return & move spsr_svc into cpsr
+        .endm
+
+        .macro  get_thread_info, rd
+        mov     \rd, sp, lsr #13
+        mov     \rd, \rd, lsl #13
+        .endm
+#else   /* CONFIG_THUMB2_KERNEL */
+        .macro  svc_exit, rpsr
+        ldr     r0, [sp, #S_SP]                 @ top of the stack
+        ldr     r1, [sp, #S_PC]                 @ return address
+        tst     r0, #4                          @ orig stack 8-byte aligned?
+        stmdb   r0, {r1, \rpsr}                 @ rfe context
+        ldmia   sp, {r0 - r12}
+        ldr     lr, [sp, #S_LR]
+        addeq   sp, sp, #S_FRAME_SIZE - 8       @ aligned
+        addne   sp, sp, #S_FRAME_SIZE - 4       @ not aligned
+        rfeia   sp!
+        .endm
+
+        .macro  restore_user_regs, fast = 0, offset = 0
+        mov     r2, sp
+        load_user_sp_lr r2, r3, \offset + S_SP  @ calling sp, lr
+        ldr     r1, [sp, #\offset + S_PSR]      @ get calling cpsr
+        ldr     lr, [sp, #\offset + S_PC]       @ get pc
+        add     sp, sp, #\offset + S_SP
+        msr     spsr_cxsf, r1                   @ save in spsr_svc
+        .if     \fast
+        ldmdb   sp, {r1 - r12}                  @ get calling r1 - r12
+        .else
+        ldmdb   sp, {r0 - r12}                  @ get calling r0 - r12
+        .endif
+        add     sp, sp, #S_FRAME_SIZE - S_SP
+        movs    pc, lr                          @ return & move spsr_svc into cpsr
+        .endm
+
+        .macro  get_thread_info, rd
+        mov     \rd, sp
+        lsr     \rd, \rd, #13
+        mov     \rd, \rd, lsl #13
+        .endm
+#endif  /* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d1..93ad576b2d74 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+        .align  2
         .type   __switch_data, %object
 __switch_data:
         .long   __mmap_switched
@@ -51,7 +52,9 @@ __mmap_switched:
         strcc   fp, [r6],#4
         bcc     1b
 
-        ldmia   r3, {r4, r5, r6, r7, sp}
+ ARM(   ldmia   r3, {r4, r5, r6, r7, sp})
+ THUMB( ldmia   r3, {r4, r5, r6, r7}    )
+ THUMB( ldr     sp, [r3, #16]           )
         str     r9, [r4]                        @ Save processor ID
         str     r1, [r5]                        @ Save machine type
         str     r2, [r6]                        @ Save atags pointer
@@ -155,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
         adr     r3, 3f
-        ldmda   r3, {r5 - r7}
+        ldmia   r3, {r5 - r7}
+        add     r3, r3, #8
         sub     r3, r3, r7                      @ get offset between virt&phys
         add     r5, r5, r3                      @ convert virt addresses to
         add     r6, r6, r3                      @ physical address space
@@ -185,9 +189,10 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
-        .long   __proc_info_begin
+        .align  2
+3:      .long   __proc_info_begin
         .long   __proc_info_end
-3:      .long   .
+4:      .long   .
         .long   __arch_info_begin
         .long   __arch_info_end
 
@@ -203,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-        adr     r3, 3b
+        adr     r3, 4b
         ldmia   r3, {r4, r5, r6}
         sub     r3, r3, r4                      @ get offset between virt&phys
         add     r5, r5, r3                      @ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed2..e5dfc2895e24 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
  */
         .section ".text.head", "ax"
 ENTRY(stext)
-        msr     cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+        setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
                                                 @ and irqs disabled
 #ifndef CONFIG_CPU_CP15
         ldr     r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
         ldr     r13, __switch_data              @ address to jump to after
                                                 @ the initialization is done
-        adr     lr, __after_proc_init           @ return (PIC) address
-        add     pc, r10, #PROCINFO_INITFUNC
+        adr     lr, BSYM(__after_proc_init)     @ return (PIC) address
+ ARM(   add     pc, r10, #PROCINFO_INITFUNC     )
+ THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
+ THUMB( mov     pc, r12                         )
 ENDPROC(stext)
 
 /*
@@ -59,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-        mrc     p15, 0, r0, c1, c0, 0           @ read control reg
+        /*
+         * CP15 system control register value returned in r0 from
+         * the CPU init function.
+         */
 #ifdef CONFIG_ALIGNMENT_TRAP
         orr     r0, r0, #CR_A
 #else
@@ -82,7 +87,8 @@ __after_proc_init:
         mcr     p15, 0, r0, c1, c0, 0           @ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-        mov     pc, r13                         @ clear the BSS and jump
+        mov     r3, r13
+        mov     pc, r3                          @ clear the BSS and jump
                                                 @ to start_kernel
 ENDPROC(__after_proc_init)
         .ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb5..38ccbe1d3b2c 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
  */
         .section ".text.head", "ax"
 ENTRY(stext)
-        msr     cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+        setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
                                                 @ and irqs disabled
         mrc     p15, 0, r9, c0, c0              @ get processor id
         bl      __lookup_processor_type         @ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
          */
         ldr     r13, __switch_data              @ address to jump to after
                                                 @ mmu has been enabled
-        adr     lr, __enable_mmu                @ return (PIC) address
-        add     pc, r10, #PROCINFO_INITFUNC
+        adr     lr, BSYM(__enable_mmu)          @ return (PIC) address
+ ARM(   add     pc, r10, #PROCINFO_INITFUNC     )
+ THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
+ THUMB( mov     pc, r12                         )
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
          * the processor type - there is no need to check the machine type
          * as it has already been validated by the primary processor.
          */
-        msr     cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+        setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
         mrc     p15, 0, r9, c0, c0              @ get processor id
         bl      __lookup_processor_type
         movs    r10, r5                         @ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
          * Use the page tables supplied from  __cpu_up.
          */
         adr     r4, __secondary_data
-        ldmia   r4, {r5, r7, r13}               @ address to jump to after
+        ldmia   r4, {r5, r7, r12}               @ address to jump to after
         sub     r4, r4, r5                      @ mmu has been enabled
         ldr     r4, [r7, r4]                    @ get secondary_data.pgdir
-        adr     lr, __enable_mmu                @ return address
-        add     pc, r10, #PROCINFO_INITFUNC     @ initialise processor
-                                                @ (return control reg)
+        adr     lr, BSYM(__enable_mmu)          @ return address
+        mov     r13, r12                        @ __secondary_switched address
+ ARM(   add     pc, r10, #PROCINFO_INITFUNC     ) @ initialise processor
+                                                  @ (return control reg)
+ THUMB( add     r12, r10, #PROCINFO_INITFUNC    )
+ THUMB( mov     pc, r12                         )
 ENDPROC(secondary_startup)
 
         /*
@@ -193,8 +198,8 @@ __turn_mmu_on:
         mcr     p15, 0, r0, c1, c0, 0           @ write control reg
         mrc     p15, 0, r3, c0, c0, 0           @ read id reg
         mov     r3, r3
-        mov     r3, r3
-        mov     pc, r13
+        mov     r3, r13
+        mov     pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
          * will be removed by paging_init().  We use our current program
          * counter to determine corresponding section base address.
          */
-        mov     r6, pc, lsr #20                 @ start of kernel section
+        mov     r6, pc
+        mov     r6, r6, lsr #20                 @ start of kernel section
         orr     r3, r7, r6, lsl #20             @ flags + kernel base
         str     r3, [r4, r6, lsl #2]            @ identity mapping
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa24..c9a8619f3856 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
                 spin_unlock_irqrestore(&irq_desc[i].lock, flags);
         } else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
                 show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489d..f28c5e9c51ea 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
                 unsigned long loc;
                 Elf32_Sym *sym;
                 s32 offset;
+                u32 upper, lower, sign, j1, j2;
 
                 offset = ELF32_R_SYM(rel->r_info);
                 if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
                                         (offset & 0x0fff);
                         break;
 
+                case R_ARM_THM_CALL:
+                case R_ARM_THM_JUMP24:
+                        upper = *(u16 *)loc;
+                        lower = *(u16 *)(loc + 2);
+
+                        /*
+                         * 25 bit signed address range (Thumb-2 BL and B.W
+                         * instructions):
+                         *   S:I1:I2:imm10:imm11:0
+                         * where:
+                         *   S     = upper[10]   = offset[24]
+                         *   I1    = ~(J1 ^ S)   = offset[23]
+                         *   I2    = ~(J2 ^ S)   = offset[22]
+                         *   imm10 = upper[9:0]  = offset[21:12]
+                         *   imm11 = lower[10:0] = offset[11:1]
+                         *   J1    = lower[13]
+                         *   J2    = lower[11]
+                         */
+                        sign = (upper >> 10) & 1;
+                        j1 = (lower >> 13) & 1;
+                        j2 = (lower >> 11) & 1;
+                        offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+                                ((~(j2 ^ sign) & 1) << 22) |
+                                ((upper & 0x03ff) << 12) |
+                                ((lower & 0x07ff) << 1);
+                        if (offset & 0x01000000)
+                                offset -= 0x02000000;
+                        offset += sym->st_value - loc;
+
+                        /* only Thumb addresses allowed (no interworking) */
+                        if (!(offset & 1) ||
+                            offset <= (s32)0xff000000 ||
+                            offset >= (s32)0x01000000) {
+                                printk(KERN_ERR
+                                       "%s: relocation out of range, section "
+                                       "%d reloc %d sym '%s'\n", module->name,
+                                       relindex, i, strtab + sym->st_name);
+                                return -ENOEXEC;
+                        }
+
+                        sign = (offset >> 24) & 1;
+                        j1 = sign ^ (~(offset >> 23) & 1);
+                        j2 = sign ^ (~(offset >> 22) & 1);
+                        *(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+                                            ((offset >> 12) & 0x03ff));
+                        *(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+                                                  (j1 << 13) | (j2 << 11) |
+                                                  ((offset >> 1) & 0x07ff));
+                        upper = *(u16 *)loc;
+                        lower = *(u16 *)(loc + 2);
+                        break;
+
                 default:
                         printk(KERN_ERR "%s: unknown relocation: %u\n",
                                module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478c..790fbee92ec5 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
         regs.ARM_r2 = (unsigned long)fn;
         regs.ARM_r3 = (unsigned long)kernel_thread_exit;
         regs.ARM_pc = (unsigned long)kernel_thread_helper;
-        regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+        regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
         return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d0187..a2ea3854cb3c 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
                 return -EIO;
 
         tmp = 0;
-        if (off < sizeof(struct pt_regs))
+        if (off == PT_TEXT_ADDR)
+                tmp = tsk->mm->start_code;
+        else if (off == PT_DATA_ADDR)
+                tmp = tsk->mm->start_data;
+        else if (off == PT_TEXT_END_ADDR)
+                tmp = tsk->mm->end_code;
+        else if (off < sizeof(struct pt_regs))
                 tmp = get_user_reg(tsk, off >> 2);
 
         return put_user(tmp, ret);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f3..d4d4f77c91b2 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -327,25 +328,38 @@ void cpu_init(void)
         }
 
         /*
+         * Define the placement constraint for the inline asm directive below.
+         * In Thumb-2, msr with an immediate value is not allowed.
+         */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC     "r"
+#else
+#define PLC     "I"
+#endif
+
+        /*
          * setup stacks for re-entrant exception handlers
          */
         __asm__ (
         "msr    cpsr_c, %1\n\t"
-        "add    sp, %0, %2\n\t"
+        "add    r14, %0, %2\n\t"
+        "mov    sp, r14\n\t"
         "msr    cpsr_c, %3\n\t"
-        "add    sp, %0, %4\n\t"
+        "add    r14, %0, %4\n\t"
+        "mov    sp, r14\n\t"
         "msr    cpsr_c, %5\n\t"
-        "add    sp, %0, %6\n\t"
+        "add    r14, %0, %6\n\t"
+        "mov    sp, r14\n\t"
         "msr    cpsr_c, %7"
             :
             : "r" (stk),
-              "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+              PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
               "I" (offsetof(struct stack, irq[0])),
-              "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+              PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
               "I" (offsetof(struct stack, abt[0])),
-              "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+              PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
               "I" (offsetof(struct stack, und[0])),
-              "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+              PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
             : "r14");
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339a..39baf1128bfa 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+        FP = 7,
+#else
         FP = 11,
+#endif
         SP = 13,
         LR = 14,
         PC = 15
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080b..638deb13da1c 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
         rsb     ip, r2, #32
         movmi   ah, ah, lsl r2
         movpl   ah, al, lsl r3
-        orrmi   ah, ah, al, lsr ip
+ ARM(   orrmi   ah, ah, al, lsr ip      )
+ THUMB( lsrmi   r3, al, ip              )
+ THUMB( orrmi   ah, ah, r3              )
         mov     al, al, lsl r2
         mov     pc, lr
 
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8c..015e8aa5a1d1 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
         rsb     ip, r2, #32
         movmi   al, al, lsr r2
         movpl   al, ah, asr r3
-        orrmi   al, al, ah, lsl ip
+ ARM(   orrmi   al, al, ah, lsl ip      )
+ THUMB( lslmi   r3, ah, ip              )
+ THUMB( orrmi   al, al, r3              )
         mov     ah, ah, asr r2
         mov     pc, lr
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2c..aaf7220d9e30 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
                 beq     no_frame                @ we have no stack frames
 
                 tst     r1, #0x10               @ 26 or 32-bit mode?
-                moveq   mask, #0xfc000003       @ mask for 26-bit
+ ARM(           moveq   mask, #0xfc000003       )
+ THUMB(         moveq   mask, #0xfc000000       )
+ THUMB(         orreq   mask, #0x03             )
                 movne   mask, #0                @ mask for 32-bit
 
 1:              stmfd   sp!, {pc}               @ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
                 mov     reg, #10
                 mov     r7, #0
 1:              mov     r3, #1
-                tst     instr, r3, lsl reg
+ ARM(           tst     instr, r3, lsl reg      )
+ THUMB(         lsl     r3, reg                 )
+ THUMB(         tst     instr, r3               )
                 beq     2f
                 add     r7, r7, #1
                 teq     r7, #6
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e7..d42252918bfb 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
         tst     r2, r0, lsl r3
         \instr  r2, r2, r0, lsl r3
         \store  r2, [r1]
-        restore_irqs ip
         moveq   r0, #0
+        restore_irqs ip
         mov     pc, lr
         .endm
 #endif
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785ebc..1279abd8b886 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
                 ands    ip, r0, #3
                 beq     1f
                 cmp     ip, #2
-USER(           strbt   r2, [r0], #1)
-USER(           strlebt r2, [r0], #1)
-USER(           strltbt r2, [r0], #1)
+                strusr  r2, r0, 1
+                strusr  r2, r0, 1, le
+                strusr  r2, r0, 1, lt
                 rsb     ip, ip, #4
                 sub     r1, r1, ip              @  7  6  5  4  3  2  1
 1:              subs    r1, r1, #8              @ -1 -2 -3 -4 -5 -6 -7
-USER(           strplt  r2, [r0], #4)
-USER(           strplt  r2, [r0], #4)
+                strusr  r2, r0, 4, pl, rept=2
                 bpl     1b
                 adds    r1, r1, #4              @  3  2  1  0 -1 -2 -3
-USER(           strplt  r2, [r0], #4)
+                strusr  r2, r0, 4, pl
 2:              tst     r1, #2                  @ 1x 1x 0x 0x 1x 1x 0x
-USER(           strnebt r2, [r0], #1)
-USER(           strnebt r2, [r0], #1)
+                strusr  r2, r0, 1, ne, rept=2
                 tst     r1, #1                  @ x1 x0 x1 x0 x1 x0 x1
+                it      ne                      @ explicit IT needed for the label
 USER(           strnebt r2, [r0])
                 mov     r0, #0
                 ldmfd   sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc4..e4fe124acedc 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
  *      Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT     0
+#else
+#define LDR1W_SHIFT     1
+#endif
+#define STR1W_SHIFT     0
+
         .macro ldr1w ptr reg abort
-100:    ldrt \reg, [\ptr], #4
-        .section __ex_table, "a"
-        .long 100b, \abort
-        .previous
+        ldrusr  \reg, \ptr, 4, abort=\abort
         .endm
 
         .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
         .endm
 
         .macro ldr1b ptr reg cond=al abort
-100:    ldr\cond\()bt \reg, [\ptr], #1
-        .section __ex_table, "a"
-        .long 100b, \abort
-        .previous
+        ldrusr  \reg, \ptr, 1, \cond, abort=\abort
         .endm
 
         .macro str1w ptr reg abort
-        str \reg, [\ptr], #4
+        W(str) \reg, [\ptr], #4
         .endm
 
         .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce646055..805e3f8fb007 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
  *
  *      Restore registers with the values previously saved with the
  *      'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *      Correction to be applied to the "ip" register when branching into
+ *      the ldr1w or str1w instructions (some of these macros may expand to
+ *      than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:              ands    ip, r2, #28
                 rsb     ip, ip, #32
+#if LDR1W_SHIFT > 0
+                lsl     ip, ip, #LDR1W_SHIFT
+#endif
                 addne   pc, pc, ip              @ C is always clear here
                 b       7f
-6:              nop
+6:
+                .rept   (1 << LDR1W_SHIFT)
+                W(nop)
+                .endr
                 ldr1w   r1, r3, abort=20f
                 ldr1w   r1, r4, abort=20f
                 ldr1w   r1, r5, abort=20f
@@ -110,9 +123,16 @@
                 ldr1w   r1, r8, abort=20f
                 ldr1w   r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+                lsl     ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+                lsr     ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
                 add     pc, pc, ip
                 nop
-                nop
+                .rept   (1 << STR1W_SHIFT)
+                W(nop)
+                .endr
                 str1w   r0, r3, abort=20f
                 str1w   r0, r4, abort=20f
                 str1w   r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a320..1a71e1584442 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
  *      Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT     0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT     0
+#else
+#define STR1W_SHIFT     1
+#endif
+
         .macro ldr1w ptr reg abort
-        ldr \reg, [\ptr], #4
+        W(ldr) \reg, [\ptr], #4
         .endm
 
         .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
         .endm
 
         .macro str1w ptr reg abort
-100:    strt \reg, [\ptr], #4
-        .section __ex_table, "a"
-        .long 100b, \abort
-        .previous
+        strusr  \reg, \ptr, 4, abort=\abort
         .endm
 
         .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
         .endm
 
         .macro str1b ptr reg cond=al abort
-100:    str\cond\()bt \reg, [\ptr], #1
-        .section __ex_table, "a"
-        .long 100b, \abort
-        .previous
+        strusr  \reg, \ptr, 1, \cond, abort=\abort
         .endm
 
         .macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c4..fd0e9dcd9fdc 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
                 .endm
 
                 .macro  load1b, reg1
-9999:           ldrbt   \reg1, [r0], $1
-                .section __ex_table, "a"
-                .align  3
-                .long   9999b, 6001f
-                .previous
+                ldrusr  \reg1, r0, 1
                 .endm
 
                 .macro  load2b, reg1, reg2
-9999:           ldrbt   \reg1, [r0], $1
-9998:           ldrbt   \reg2, [r0], $1
-                .section __ex_table, "a"
-                .long   9999b, 6001f
-                .long   9998b, 6001f
-                .previous
+                ldrusr  \reg1, r0, 1
+                ldrusr  \reg2, r0, 1
                 .endm
 
                 .macro  load1l, reg1
-9999:           ldrt    \reg1, [r0], $4
-                .section __ex_table, "a"
-                .align  3
-                .long   9999b, 6001f
-                .previous
+                ldrusr  \reg1, r0, 4
                 .endm
 
                 .macro  load2l, reg1, reg2
-9999:           ldrt    \reg1, [r0], $4
-9998:           ldrt    \reg2, [r0], $4
-                .section __ex_table, "a"
-                .long   9999b, 6001f
-                .long   9998b, 6001f
-                .previous
+                ldrusr  \reg1, r0, 4
+                ldrusr  \reg2, r0, 4
                 .endm
 
                 .macro  load4l, reg1, reg2, reg3, reg4
-9999:           ldrt    \reg1, [r0], $4
-9998:           ldrt    \reg2, [r0], $4
-9997:           ldrt    \reg3, [r0], $4
-9996:           ldrt    \reg4, [r0], $4
-                .section __ex_table, "a"
-                .long   9999b, 6001f
-                .long   9998b, 6001f
-                .long   9997b, 6001f
-                .long   9996b, 6001f
-                .previous
+                ldrusr  \reg1, r0, 4
+                ldrusr  \reg2, r0, 4
+                ldrusr  \reg3, r0, 4
+                ldrusr  \reg4, r0, 4
                 .endm
 
 /*
@@ -92,14 +70,14 @@
  */
                 .section .fixup,"ax"
                 .align  4
-6001:           mov     r4, #-EFAULT
+9001:           mov     r4, #-EFAULT
                 ldr     r5, [fp, #4]            @ *err_ptr
                 str     r4, [r5]
                 ldmia   sp, {r1, r2}            @ retrieve dst, len
                 add     r2, r2, r1
                 mov     r0, #0                  @ zero the buffer
-6002:           teq     r2, r1
+9002:           teq     r2, r1
                 strneb  r0, [r1], #1
-                bne     6002b
+                bne     9002b
                 load_regs
                 .previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba86..faa7748142da 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
         mov     yh, xh, lsr ip
         mov     yl, xl, lsr ip
         rsb     ip, ip, #32
-        orr     yl, yl, xh, lsl ip
+ ARM(   orr     yl, yl, xh, lsl ip      )
+ THUMB( lsl     xh, xh, ip              )
+ THUMB( orr     yl, yl, xh              )
         mov     xh, xl, lsl ip
         mov     xh, xh, lsr ip
         mov     pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c4..1e4cbd4e7be9 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
                 teq     r1, #0  
                 beq     3f
                 mov     r2, #0
-1:              ldrb    r3, [r0, r2, lsr #3]
+1:
+ ARM(           ldrb    r3, [r0, r2, lsr #3]    )
+ THUMB(         lsr     r3, r2, #3              )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 eors    r3, r3, #0xff           @ invert bits
                 bne     .L_found                @ any now set - found zero bit
                 add     r2, r2, #8              @ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
                 beq     3b
                 ands    ip, r2, #7
                 beq     1b                      @ If new byte, goto old routine
-                ldrb    r3, [r0, r2, lsr #3]
+ ARM(           ldrb    r3, [r0, r2, lsr #3]    )
+ THUMB(         lsr     r3, r2, #3              )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 eor     r3, r3, #0xff           @ now looking for a 1 bit
                 movs    r3, r3, lsr ip          @ shift off unused bits
                 bne     .L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
                 teq     r1, #0  
                 beq     3f
                 mov     r2, #0
-1:              ldrb    r3, [r0, r2, lsr #3]
+1:
+ ARM(           ldrb    r3, [r0, r2, lsr #3]    )
+ THUMB(         lsr     r3, r2, #3              )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 movs    r3, r3
                 bne     .L_found                @ any now set - found zero bit
                 add     r2, r2, #8              @ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
                 beq     3b
                 ands    ip, r2, #7
                 beq     1b                      @ If new byte, goto old routine
-                ldrb    r3, [r0, r2, lsr #3]
+ ARM(           ldrb    r3, [r0, r2, lsr #3]    )
+ THUMB(         lsr     r3, r2, #3              )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 movs    r3, r3, lsr ip          @ shift off unused bits
                 bne     .L_found
                 orr     r2, r2, #7              @ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
                 beq     3f
                 mov     r2, #0
 1:              eor     r3, r2, #0x18           @ big endian byte ordering
-                ldrb    r3, [r0, r3, lsr #3]
+ ARM(           ldrb    r3, [r0, r3, lsr #3]    )
+ THUMB(         lsr     r3, #3                  )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 eors    r3, r3, #0xff           @ invert bits
                 bne     .L_found                @ any now set - found zero bit
                 add     r2, r2, #8              @ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
                 ands    ip, r2, #7
                 beq     1b                      @ If new byte, goto old routine
                 eor     r3, r2, #0x18           @ big endian byte ordering
-                ldrb    r3, [r0, r3, lsr #3]
+ ARM(           ldrb    r3, [r0, r3, lsr #3]    )
+ THUMB(         lsr     r3, #3                  )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 eor     r3, r3, #0xff           @ now looking for a 1 bit
                 movs    r3, r3, lsr ip          @ shift off unused bits
                 bne     .L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
                 beq     3f
                 mov     r2, #0
 1:              eor     r3, r2, #0x18           @ big endian byte ordering
-                ldrb    r3, [r0, r3, lsr #3]
+ ARM(           ldrb    r3, [r0, r3, lsr #3]    )
+ THUMB(         lsr     r3, #3                  )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 movs    r3, r3
                 bne     .L_found                @ any now set - found zero bit
                 add     r2, r2, #8              @ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
                 ands    ip, r2, #7
                 beq     1b                      @ If new byte, goto old routine
                 eor     r3, r2, #0x18           @ big endian byte ordering
-                ldrb    r3, [r0, r3, lsr #3]
+ ARM(           ldrb    r3, [r0, r3, lsr #3]    )
+ THUMB(         lsr     r3, #3                  )
+ THUMB(         ldrb    r3, [r0, r3]            )
                 movs    r3, r3, lsr ip          @ shift off unused bits
                 bne     .L_found
                 orr     r2, r2, #7              @ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b7607..a1814d927122 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:      ldrbt   r2, [r0]
+3:      ldrbt   r3, [r0, #1]
+#else
 2:      ldrbt   r2, [r0], #1
 3:      ldrbt   r3, [r0]
+#endif
 #ifndef __ARMEB__
         orr     r2, r2, r3, lsl #8
 #else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86b..ff4f71b579ee 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-                ldr     r3, [r1, -r3]!
+ ARM(           ldr     r3, [r1, -r3]!  )
+ THUMB(         rsb     r3, r3, #0      )
+ THUMB(         ldr     r3, [r1, r3]    )
+ THUMB(         sub     r1, r3          )
                 subcs   r2, r2, #1
                 bcs     2f
                 subs    r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87c..f83d449141f7 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
         rsb     ip, r2, #32
         movmi   al, al, lsr r2
         movpl   al, ah, lsr r3
-        orrmi   al, al, ah, lsl ip
+ ARM(   orrmi   al, al, ah, lsl ip      )
+ THUMB( lslmi   r3, ah, ip              )
+ THUMB( orrmi   al, al, r3              )
         mov     ah, ah, lsr r2
         mov     pc, lr
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3f..a9b9e2287a09 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT     0
+#define STR1W_SHIFT     0
+
         .macro ldr1w ptr reg abort
-        ldr \reg, [\ptr], #4
+        W(ldr) \reg, [\ptr], #4
         .endm
 
         .macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
         .endm
 
         .macro str1w ptr reg abort
-        str \reg, [\ptr], #4
+        W(str) \reg, [\ptr], #4
         .endm
 
         .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088c..5025c863713d 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
                 addne   pc, pc, ip              @ C is always clear here
                 b       7f
 6:              nop
-                ldr     r3, [r1, #-4]!
-                ldr     r4, [r1, #-4]!
-                ldr     r5, [r1, #-4]!
-                ldr     r6, [r1, #-4]!
-                ldr     r7, [r1, #-4]!
-                ldr     r8, [r1, #-4]!
-                ldr     lr, [r1, #-4]!
+                W(ldr)  r3, [r1, #-4]!
+                W(ldr)  r4, [r1, #-4]!
+                W(ldr)  r5, [r1, #-4]!
+                W(ldr)  r6, [r1, #-4]!
+                W(ldr)  r7, [r1, #-4]!
+                W(ldr)  r8, [r1, #-4]!
+                W(ldr)  lr, [r1, #-4]!
 
                 add     pc, pc, ip
                 nop
                 nop
-                str     r3, [r0, #-4]!
-                str     r4, [r0, #-4]!
-                str     r5, [r0, #-4]!
-                str     r6, [r0, #-4]!
-                str     r7, [r0, #-4]!
-                str     r8, [r0, #-4]!
-                str     lr, [r0, #-4]!
+                W(str)  r3, [r0, #-4]!
+                W(str)  r4, [r0, #-4]!
+                W(str)  r5, [r0, #-4]!
+                W(str)  r6, [r0, #-4]!
+                W(str)  r7, [r0, #-4]!
+                W(str)  r8, [r0, #-4]!
+                W(str)  lr, [r0, #-4]!
 
         CALGN(  bcs     2b                      )
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f18..02fedbf07c0d 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
         mov     ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:      strbt   r2, [r0]
+3:      strbt   ip, [r0, #1]
+#else
+2:      strbt   ip, [r0]
+3:      strbt   r2, [r0, #1]
+#endif
+#else   /* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:      strbt   r2, [r0], #1
 3:      strbt   ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:      strbt   ip, [r0], #1
 3:      strbt   r2, [r0]
 #endif
+#endif  /* CONFIG_THUMB2_KERNEL */
         mov     r0, #0
         mov     pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:      strt    r2, [r0]
+6:      strt    r3, [r0, #4]
+#else
 5:      strt    r2, [r0], #4
 6:      strt    r3, [r0]
+#endif
         mov     r0, #0
         mov     pc, lr
 ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c841..09b548cac1a4 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+        .align  2
 .L_sha_K:
         .word   0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+        .align  2
 .L_sha_initial_digest:
         .word   0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd9..1c9814f346c6 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
         mov     ip, r1
 1:      subs    r2, r2, #1
-USER(   ldrplbt r3, [r1], #1)
+        ldrusr  r3, r1, 1, pl
         bmi     2f
         strb    r3, [r0], #1
         teq     r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d020836..7855b2906659 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
         mov     r2, r0
 1:
-USER(   ldrbt   r3, [r0], #1)
+        ldrusr  r3, r0, 1
         teq     r3, #0
         beq     2f
         subs    r1, r1, #1
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 000000000000..187cb58345c0
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+        unsigned int    nr_channels;
+        dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+        AT_DMA_SLAVE_WIDTH_8BIT = 0,
+        AT_DMA_SLAVE_WIDTH_16BIT,
+        AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *      memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *      peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+        struct device           *dma_dev;
+        dma_addr_t              tx_reg;
+        dma_addr_t              rx_reg;
+        enum at_dma_slave_width reg_width;
+        u32                     cfg;
+        u32                     ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define ATC_SRC_PER(h)          (0xFU & (h))    /* Channel src rq associated with periph handshaking ifc h */
+#define ATC_DST_PER(h)          ((0xFU & (h)) <<  4)    /* Channel dst rq associated with periph handshaking ifc h */
+#define ATC_SRC_REP             (0x1 <<  8)     /* Source Replay Mod */
+#define ATC_SRC_H2SEL           (0x1 <<  9)     /* Source Handshaking Mod */
+#define         ATC_SRC_H2SEL_SW        (0x0 <<  9)
+#define         ATC_SRC_H2SEL_HW        (0x1 <<  9)
+#define ATC_DST_REP             (0x1 << 12)     /* Destination Replay Mod */
+#define ATC_DST_H2SEL           (0x1 << 13)     /* Destination Handshaking Mod */
+#define         ATC_DST_H2SEL_SW        (0x0 << 13)
+#define         ATC_DST_H2SEL_HW        (0x1 << 13)
+#define ATC_SOD                 (0x1 << 16)     /* Stop On Done */
+#define ATC_LOCK_IF             (0x1 << 20)     /* Interface Lock */
+#define ATC_LOCK_B              (0x1 << 21)     /* AHB Bus Lock */
+#define ATC_LOCK_IF_L           (0x1 << 22)     /* Master Interface Arbiter Lock */
+#define         ATC_LOCK_IF_L_CHUNK     (0x0 << 22)
+#define         ATC_LOCK_IF_L_BUFFER    (0x1 << 22)
+#define ATC_AHB_PROT_MASK       (0x7 << 24)     /* AHB Protection */
+#define ATC_FIFOCFG_MASK        (0x3 << 28)     /* FIFO Request Configuration */
+#define         ATC_FIFOCFG_LARGESTBURST        (0x0 << 28)
+#define         ATC_FIFOCFG_HALFFIFO            (0x1 << 28)
+#define         ATC_FIFOCFG_ENOUGHSPACE         (0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define ATC_SCSIZE_MASK         (0x7 << 16)     /* Source Chunk Transfer Size */
+#define         ATC_SCSIZE_1            (0x0 << 16)
+#define         ATC_SCSIZE_4            (0x1 << 16)
+#define         ATC_SCSIZE_8            (0x2 << 16)
+#define         ATC_SCSIZE_16           (0x3 << 16)
+#define         ATC_SCSIZE_32           (0x4 << 16)
+#define         ATC_SCSIZE_64           (0x5 << 16)
+#define         ATC_SCSIZE_128          (0x6 << 16)
+#define         ATC_SCSIZE_256          (0x7 << 16)
+#define ATC_DCSIZE_MASK         (0x7 << 20)     /* Destination Chunk Transfer Size */
+#define         ATC_DCSIZE_1            (0x0 << 20)
+#define         ATC_DCSIZE_4            (0x1 << 20)
+#define         ATC_DCSIZE_8            (0x2 << 20)
+#define         ATC_DCSIZE_16           (0x3 << 20)
+#define         ATC_DCSIZE_32           (0x4 << 20)
+#define         ATC_DCSIZE_64           (0x5 << 20)
+#define         ATC_DCSIZE_128          (0x6 << 20)
+#define         ATC_DCSIZE_256          (0x7 << 20)
+
+#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c
index a2df5bb7dff0..dbcac9c40a28 100644
--- a/arch/arm/mach-ep93xx/dma-m2p.c
+++ b/arch/arm/mach-ep93xx/dma-m2p.c
@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9ae..d795642fad22 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
 #define PCIO_BASE               PCI_IO_VADDR
 #define PCIMEM_BASE             PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()     1
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 69956cdae3c2..2a318eba1b07 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE              0xc0000000
 
-#define INTCP_VA_CIC_BASE               0xf1000040
-#define INTCP_VA_PIC_BASE               0xf1400000
-#define INTCP_VA_SIC_BASE               0xfca00000
+#define INTCP_VA_CIC_BASE               IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE               IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE               IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE               0xc8000000
 #define INTCP_ETH_SIZE                  0x10
 
-#define INTCP_VA_CTRL_BASE              0xfcb00000
+#define INTCP_VA_CTRL_BASE              IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG                 0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN   (1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN    (1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
                 .length         = SZ_4K,
                 .type           = MT_DEVICE
         }, {
-                .virtual        = 0xfca00000,
+                .virtual        = IO_ADDRESS(0xca000000),
                 .pfn            = __phys_to_pfn(0xca000000),
                 .length         = SZ_4K,
                 .type           = MT_DEVICE
         }, {
-                .virtual        = 0xfcb00000,
+                .virtual        = IO_ADDRESS(0xcb000000),
                 .pfn            = __phys_to_pfn(0xcb000000),
                 .length         = SZ_4K,
                 .type           = MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-        unsigned int status = readl(0xfca00004);
-        writel(8, 0xfcb00008);
+        unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+        writel(8, IO_ADDRESS(0xcb000000) + 8);
 
         return status & 8;
 }
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4c..0aca451b216d 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
           Say 'Y' here if you want your kernel to support the
           QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+        bool "Marvell OpenRD Base Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell OpenRD Base Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d6..80ab0ec90ee1 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)      += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)           += sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)                += ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)          += openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f6919838011..0acb61f3c10b 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
         u32 dev, rev;
 
         kirkwood_pcie_id(&dev, &rev);
-        if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+        if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+                                        rev == MV88F6281_REV_A1))
                 return 200000000;
 
         return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
                         return "MV88F6281-Z0";
                 else if (rev == MV88F6281_REV_A0)
                         return "MV88F6281-A0";
+                else if (rev == MV88F6281_REV_A1)
+                        return "MV88F6281-A1";
                 else
                         return "MV88F6281-Rev-Unsupported";
         } else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a0..54c132731d2d 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID        0x6281
 #define MV88F6281_REV_Z0        0
 #define MV88F6281_REV_A0        2
+#define MV88F6281_REV_A1        3
 
 #define MV88F6192_DEV_ID        0x6192
 #define MV88F6192_REV_Z0        0
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e021a80c2caf..bc74278ed311 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO              MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12            MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX           MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX           MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO              MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9             MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 000000000000..947dfb8cd5b2
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+        {
+                .name = "u-boot",
+                .offset = 0,
+                .size = SZ_1M
+        }, {
+                .name = "uImage",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = SZ_4M
+        }, {
+                .name = "root",
+                .offset = MTDPART_OFS_NXTBLK,
+                .size = MTDPART_SIZ_FULL
+        },
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data openrd_base_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+        .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+        MPP29_GPIO,
+        0
+};
+
+static void __init openrd_base_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+        kirkwood_mpp_conf(openrd_base_mpp_config);
+
+        kirkwood_uart0_init();
+        kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+        kirkwood_ehci_init();
+
+        kirkwood_ge00_init(&openrd_base_ge00_data);
+        kirkwood_sata_init(&openrd_base_sata_data);
+        kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = openrd_base_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d0..d1b588519ad2 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-        .name = "CLK16M",
         .get_rate = clk16m_get_rate,
         .enable = _clk_enable,
         .enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-        .name = "CLK32",
         .get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-        .name = "CLK32_premultiplier",
         .parent = &clk32,
         .get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-        .name = "prem_clk",
         .set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-        .name = "system_clk",
         .parent = &prem_clk,
         .get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-        .name = "mcu_clk",
         .parent = &clk32_premult,
         .get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-        .name = "fclk",
         .parent = &mcu_clk,
         .get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-        .name = "hclk",
         .parent = &system_clk,
         .get_rate = hclk_get_rate,
         .round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-        .name = "CLK48M",
         .parent = &system_clk,
         .get_rate = clk48m_get_rate,
         .round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
         {
-                .name = "perclk",
                 .id = 0,
                 .parent = &system_clk,
                 .get_rate = perclk1_get_rate,
                 .round_rate = perclk1_round_rate,
                 .set_rate = perclk1_set_rate,
         }, {
-                .name = "perclk",
                 .id = 1,
                 .parent = &system_clk,
                 .get_rate = perclk2_get_rate,
                 .round_rate = perclk2_round_rate,
                 .set_rate = perclk2_set_rate,
         }, {
-                .name = "perclk",
                 .id = 2,
                 .parent = &system_clk,
                 .get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-        .name = "clko_clk",
         .set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-        .name = "dma",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-        .name = "csi_clk",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-        .name = "mma_clk",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-        .name = "usbd_clk",
         .parent = &clk48m,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-        .name = "gpt_clk",
         .parent = &perclk[0],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-        .name = "uart",
         .parent = &perclk[0],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-        .name = "i2c_clk",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-        .name = "spi_clk",
         .parent = &perclk[1],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-        .name = "sdhc_clk",
         .parent = &perclk[1],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-        .name = "lcdc_clk",
         .parent = &perclk[1],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-        .name = "mshc_clk",
         .parent = &hclk,
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-        .name = "ssi_clk",
         .parent = &perclk[2],
         .round_rate = _clk_parent_round_rate,
         .set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-        .name = "rtc_clk",
         .parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-        &clk16m,
-        &clk32,
-        &clk32_premult,
-        &prem_clk,
-        &system_clk,
-        &mcu_clk,
-        &fclk,
-        &hclk,
-        &clk48m,
-        &perclk[0],
-        &perclk[1],
-        &perclk[2],
-        &clko_clk,
-        &dma_clk,
-        &csi_clk,
-        &mma_clk,
-        &usbd_clk,
-        &gpt_clk,
-        &uart_clk,
-        &i2c_clk,
-        &spi_clk,
-        &sdhc_clk,
-        &lcdc_clk,
-        &mshc_clk,
-        &ssi_clk,
-        &rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+        { \
+                .dev_id = d, \
+                .con_id = n, \
+                .clk = &c, \
+        },
+static struct clk_lookup lookups[] __initdata = {
+        _REGISTER_CLOCK(NULL, "dma", dma_clk)
+        _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+        _REGISTER_CLOCK(NULL, "mma", mma_clk)
+        _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+        _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+        _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+        _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+        _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+        _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+        _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+        _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+        _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+        _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+        _REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+        _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-        struct clk **clkp;
         unsigned int reg;
+        int i;
 
         /* disable clocks we are able to */
         __raw_writel(0, SCM_GCCR);
@@ -620,13 +592,13 @@ int __init mx1_clocks_init(unsigned long fref)
         reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
         clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-        for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-                clk_register(*clkp);
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
 
         clk_enable(&hclk);
         clk_enable(&fclk);
 
-        mxc_timer_init(&gpt_clk);
+        mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb48079..b6be29d1cb08 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-        [0] = {
+        {
                 .start  = 0x00224000,
                 .end    = 0x00224010,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = CSI_INT,
                 .end    = CSI_INT,
                 .flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-        [0] = {
+        {
                 .start  = 0x00217000,
                 .end    = 0x00217010,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = I2C_INT,
                 .end    = I2C_INT,
                 .flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-        [0] = {
+        {
                 .start  = UART1_BASE_ADDR,
                 .end    = UART1_BASE_ADDR + 0xD0,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = UART1_MINT_RX,
                 .end    = UART1_MINT_RX,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
+        }, {
                 .start  = UART1_MINT_TX,
                 .end    = UART1_MINT_TX,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [3] = {
+        }, {
                 .start  = UART1_MINT_RTS,
                 .end    = UART1_MINT_RTS,
                 .flags  = IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-        [0] = {
+        {
                 .start  = UART2_BASE_ADDR,
                 .end    = UART2_BASE_ADDR + 0xD0,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = UART2_MINT_RX,
                 .end    = UART2_MINT_RX,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
+        }, {
                 .start  = UART2_MINT_TX,
                 .end    = UART2_MINT_TX,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [3] = {
+        }, {
                 .start  = UART2_MINT_RTS,
                 .end    = UART2_MINT_RTS,
                 .flags  = IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-        [0] = {
+        {
                 .start  = 0x00204000,
                 .end    = 0x00204024,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = RTC_INT,
                 .end    = RTC_INT,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
+        }, {
                 .start  = RTC_SAMINT,
                 .end    = RTC_SAMINT,
                 .flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-        [0] = {
+        {
                 .start  = 0x00201000,
                 .end    = 0x00201008,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = WDT_INT,
                 .end    = WDT_INT,
                 .flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-        [0] = {
+        {
                 .start  = 0x00212000,
                 .end    = 0x00212148,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = USBD_INT0,
                 .end    = USBD_INT0,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [2] = {
+        }, {
                 .start  = USBD_INT1,
                 .end    = USBD_INT1,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [3] = {
+        }, {
                 .start  = USBD_INT2,
                 .end    = USBD_INT2,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [4] = {
+        }, {
                 .start  = USBD_INT3,
                 .end    = USBD_INT3,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [5] = {
+        }, {
                 .start  = USBD_INT4,
                 .end    = USBD_INT4,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [6] = {
+        }, {
                 .start  = USBD_INT5,
                 .end    = USBD_INT5,
                 .flags  = IORESOURCE_IRQ,
-        },
-        [7] = {
+        }, {
                 .start  = USBD_INT6,
                 .end    = USBD_INT6,
                 .flags  = IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-        [0] = {
+        {
                 .chip.label = "gpio-0",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
                 .irq = GPIO_INT_PORTA,
-                .virtual_irq_start = MXC_GPIO_IRQ_START
-        },
-        [1] = {
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
+        }, {
                 .chip.label = "gpio-1",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
                 .irq = GPIO_INT_PORTB,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32
-        },
-        [2] = {
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+        }, {
                 .chip.label = "gpio-2",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
                 .irq = GPIO_INT_PORTC,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 64
-        },
-        [3] = {
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+        }, {
                 .chip.label = "gpio-3",
                 .base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
                 .irq = GPIO_INT_PORTD,
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 96
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
         }
 };
 
diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c97..7f9fc1034c08 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,13 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX1);
+        mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
         iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3b..30f04e56fafe 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
         {
-                I2C_BOARD_INFO("pcf857x", 0x22),
-                .type = "pcf8575",
+                I2C_BOARD_INFO("pcf8575", 0x22),
                 .platform_data = &pcf857x_data[0],
         }, {
-                I2C_BOARD_INFO("pcf857x", 0x24),
-                .type = "pcf8575",
+                I2C_BOARD_INFO("pcf8575", 0x24),
                 .platform_data = &pcf857x_data[1],
         },
 };
@@ -151,7 +149,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx1_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx1_init_irq,
         .timer          = &mx1ads_timer,
         .init_machine   = mx1ads_init,
 MACHINE_END
@@ -161,7 +159,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx1_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx1_init_irq,
         .timer          = &mx1ads_timer,
         .init_machine   = mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdffc..325d98df6053 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-        [0] = {
+        {
                 .name   = "address area",
                 .start  = IMX_CS5_PHYS,
                 .end    = IMX_CS5_PHYS + 1,
-                .flags  = IORESOURCE_MEM        /* address access */
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,       /* address access */
+        }, {
                 .name   = "data area",
                 .start  = IMX_CS5_PHYS + 4,
                 .end    = IMX_CS5_PHYS + 5,
-                .flags  = IORESOURCE_MEM        /* data access */
-        },
-        [2] = {
+                .flags  = IORESOURCE_MEM,       /* data access */
+        }, {
                 .start  = IRQ_GPIOC(3),
                 .end    = IRQ_GPIOC(3),
-                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
         },
 };
 
@@ -154,7 +152,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
         .io_pg_offst    = ((0xe0200000) >> 18) & 0xfffc,
         .boot_params    = 0x08000100,
         .map_io         = mx1_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx1_init_irq,
         .timer          = &scb9328_timer,
         .init_machine   = scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71d..c8a2eac4d13c 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,34 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+        bool "Eukrea CPUIMX27 module"
+        depends on MACH_MX27
+        help
+          Include support for Eukrea CPUIMX27 platform. This includes
+          specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+        bool "CPUIMX27 integrates SDHC2 module"
+        depends on MACH_EUKREA_CPUIMX27
+        help
+          This adds support for the internal SDHC2 used on CPUIMX27 used
+          for wifi or eMMC.
+
+choice
+        prompt "Baseboard"
+        depends on MACH_EUKREA_CPUIMX27
+        default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+        prompt "Eukrea MBIMX27 development board"
+        bool
+        help
+          This adds board specific devices that can be found on Eukrea's
+          MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
         bool "MX27PDK platform"
         depends on MACH_MX27
@@ -67,4 +95,11 @@ config MACH_MX27LITE
           Include support for MX27 LITEKIT platform. This includes specific
           configurations for the board and its peripherals.
 
+config MACH_PCA100
+        bool "Phytec phyCARD-s (pca100)"
+        depends on MACH_MX27
+        help
+          Include support for phyCARD-s (aka pca100) platform. This
+          includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9bc..19560f045632 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,7 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec15..eede79855f4a 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
         clk_enable(&uart_clk[0]);
 #endif
 
-        mxc_timer_init(&gpt_clk[0]);
+        mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
         return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f2..4089951acb47 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
         _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
         _REGISTER_CLOCK(NULL, "csi", csi_clk)
-        _REGISTER_CLOCK(NULL, "usb", usb_clk)
+        _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+        _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
         _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
         _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
         _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
@@ -748,7 +755,7 @@ int __init mx27_clocks_init(unsigned long fref)
         clk_enable(&uart1_clk);
 #endif
 
-        mxc_timer_init(&gpt1_clk);
+        mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b3674327..50199aff0143 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -40,45 +40,87 @@
 #include "devices.h"
 
 /*
- * Resource definition for the MXC IrDA
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
  */
-static struct resource mxc_irda_resources[] = {
-        [0] = {
-                .start   = UART3_BASE_ADDR,
-                .end     = UART3_BASE_ADDR + SZ_4K - 1,
-                .flags   = IORESOURCE_MEM,
+static struct resource mxc_spi_resources0[] = {
+        {
+               .start = CSPI1_BASE_ADDR,
+               .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+        }, {
+               .start = MXC_INT_CSPI1,
+               .end = MXC_INT_CSPI1,
+               .flags = IORESOURCE_IRQ,
         },
-        [1] = {
-                .start   = MXC_INT_UART3,
-                .end     = MXC_INT_UART3,
-                .flags   = IORESOURCE_IRQ,
+};
+
+static struct resource mxc_spi_resources1[] = {
+        {
+                .start = CSPI2_BASE_ADDR,
+                .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_CSPI2,
+                .end = MXC_INT_CSPI2,
+                .flags = IORESOURCE_IRQ,
         },
 };
 
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-        .name = "mxc_irda",
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+        {
+                .start = CSPI3_BASE_ADDR,
+                .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_CSPI3,
+                .end = MXC_INT_CSPI3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+        .name = "spi_imx",
         .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_irda_resources),
-        .resource = mxc_irda_resources,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+        .resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+        .name = "spi_imx",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+        .resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+        .name = "spi_imx",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+        .resource = mxc_spi_resources2,
 };
+#endif
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-        [0] = {
+        {
                 .start  = GPT2_BASE_ADDR,
                 .end    = GPT2_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_GPT2,
                 .end     = MXC_INT_GPT2,
                 .flags   = IORESOURCE_IRQ,
@@ -89,16 +131,15 @@ struct platform_device mxc_gpt1 = {
         .name = "imx_gpt",
         .id = 1,
         .num_resources = ARRAY_SIZE(timer1_resources),
-        .resource = timer1_resources
+        .resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-        [0] = {
+        {
                 .start  = GPT3_BASE_ADDR,
                 .end    = GPT3_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_GPT3,
                 .end     = MXC_INT_GPT3,
                 .flags   = IORESOURCE_IRQ,
@@ -109,17 +150,16 @@ struct platform_device mxc_gpt2 = {
         .name = "imx_gpt",
         .id = 2,
         .num_resources = ARRAY_SIZE(timer2_resources),
-        .resource = timer2_resources
+        .resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-        [0] = {
+        {
                 .start  = GPT4_BASE_ADDR,
                 .end    = GPT4_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_GPT4,
                 .end     = MXC_INT_GPT4,
                 .flags   = IORESOURCE_IRQ,
@@ -130,16 +170,15 @@ struct platform_device mxc_gpt3 = {
         .name = "imx_gpt",
         .id = 3,
         .num_resources = ARRAY_SIZE(timer3_resources),
-        .resource = timer3_resources
+        .resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-        [0] = {
+        {
                 .start  = GPT5_BASE_ADDR,
                 .end    = GPT5_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_GPT5,
                 .end     = MXC_INT_GPT5,
                 .flags   = IORESOURCE_IRQ,
@@ -150,16 +189,15 @@ struct platform_device mxc_gpt4 = {
         .name = "imx_gpt",
         .id = 4,
         .num_resources = ARRAY_SIZE(timer4_resources),
-        .resource = timer4_resources
+        .resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-        [0] = {
+        {
                 .start  = GPT6_BASE_ADDR,
                 .end    = GPT6_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_GPT6,
                 .end     = MXC_INT_GPT6,
                 .flags   = IORESOURCE_IRQ,
@@ -170,7 +208,7 @@ struct platform_device mxc_gpt5 = {
         .name = "imx_gpt",
         .id = 5,
         .num_resources = ARRAY_SIZE(timer5_resources),
-        .resource = timer5_resources
+        .resource = timer5_resources,
 };
 #endif
 
@@ -214,11 +252,11 @@ static struct resource mxc_nand_resources[] = {
         {
                 .start  = NFC_BASE_ADDR,
                 .end    = NFC_BASE_ADDR + 0xfff,
-                .flags  = IORESOURCE_MEM
+                .flags  = IORESOURCE_MEM,
         }, {
                 .start  = MXC_INT_NANDFC,
                 .end    = MXC_INT_NANDFC,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -240,8 +278,7 @@ static struct resource mxc_fb[] = {
                 .start = LCDC_BASE_ADDR,
                 .end   = LCDC_BASE_ADDR + 0xFFF,
                 .flags = IORESOURCE_MEM,
-        },
-        {
+        }, {
                 .start = MXC_INT_LCDC,
                 .end   = MXC_INT_LCDC,
                 .flags = IORESOURCE_IRQ,
@@ -264,11 +301,11 @@ static struct resource mxc_fec_resources[] = {
         {
                 .start  = FEC_BASE_ADDR,
                 .end    = FEC_BASE_ADDR + 0xfff,
-                .flags  = IORESOURCE_MEM
+                .flags  = IORESOURCE_MEM,
         }, {
                 .start  = MXC_INT_FEC,
                 .end    = MXC_INT_FEC,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -281,15 +318,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-        [0] = {
+        {
                 .start  = I2C_BASE_ADDR,
                 .end    = I2C_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start  = MXC_INT_I2C,
                 .end    = MXC_INT_I2C,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         }
 };
 
@@ -297,20 +333,19 @@ struct platform_device mxc_i2c_device0 = {
         .name = "imx-i2c",
         .id = 0,
         .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-        .resource = mxc_i2c_1_resources
+        .resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-        [0] = {
+        {
                 .start  = I2C2_BASE_ADDR,
                 .end    = I2C2_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start  = MXC_INT_I2C2,
                 .end    = MXC_INT_I2C2,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         }
 };
 
@@ -318,17 +353,16 @@ struct platform_device mxc_i2c_device1 = {
         .name = "imx-i2c",
         .id = 1,
         .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-        .resource = mxc_i2c_2_resources
+        .resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-        [0] = {
+        {
                 .start  = PWM_BASE_ADDR,
                 .end    = PWM_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM
-        },
-        [1] = {
+                .flags  = IORESOURCE_MEM,
+        }, {
                 .start   = MXC_INT_PWM,
                 .end     = MXC_INT_PWM,
                 .flags   = IORESOURCE_IRQ,
@@ -339,28 +373,26 @@ struct platform_device mxc_pwm_device = {
         .name = "mxc_pwm",
         .id = 0,
         .num_resources = ARRAY_SIZE(mxc_pwm_resources),
-        .resource = mxc_pwm_resources
+        .resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-        [0] = {
-                        .start = SDHC1_BASE_ADDR,
-                        .end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                        },
-        [1] = {
-                        .start = MXC_INT_SDHC1,
-                        .end   = MXC_INT_SDHC1,
-                        .flags = IORESOURCE_IRQ,
-                        },
-        [2] = {
-                        .start  = DMA_REQ_SDHC1,
-                        .end    = DMA_REQ_SDHC1,
-                        .flags  = IORESOURCE_DMA
-                },
+        {
+                .start = SDHC1_BASE_ADDR,
+                .end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_SDHC1,
+                .end   = MXC_INT_SDHC1,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start  = DMA_REQ_SDHC1,
+                .end    = DMA_REQ_SDHC1,
+                .flags  = IORESOURCE_DMA,
+        },
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -377,21 +409,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-        [0] = {
-                        .start = SDHC2_BASE_ADDR,
-                        .end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                        },
-        [1] = {
-                        .start = MXC_INT_SDHC2,
-                        .end   = MXC_INT_SDHC2,
-                        .flags = IORESOURCE_IRQ,
-                        },
-        [2] = {
-                        .start  = DMA_REQ_SDHC2,
-                        .end    = DMA_REQ_SDHC2,
-                        .flags  = IORESOURCE_DMA
-                },
+        {
+                .start = SDHC2_BASE_ADDR,
+                .end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_SDHC2,
+                .end   = MXC_INT_SDHC2,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start  = DMA_REQ_SDHC2,
+                .end    = DMA_REQ_SDHC2,
+                .flags  = IORESOURCE_DMA,
+        },
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -407,35 +437,123 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+        {
+                .start  = OTG_BASE_ADDR,
+                .end    = OTG_BASE_ADDR + 0x1ff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MXC_INT_USB3,
+                .end    = MXC_INT_USB3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+        .name           = "fsl-usb2-udc",
+        .id             = -1,
+        .dev            = {
+                .dma_mask               = &otg_dmamask,
+                .coherent_dma_mask      = 0xffffffffUL,
+        },
+        .resource       = otg_resources,
+        .num_resources  = ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+        .name = "mxc-ehci",
+        .id = 0,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &otg_dmamask,
+        },
+        .resource = otg_resources,
+        .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+        {
+                .start = OTG_BASE_ADDR + 0x200,
+                .end = OTG_BASE_ADDR + 0x3ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_USB1,
+                .end = MXC_INT_USB1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_usbh1 = {
+        .name = "mxc-ehci",
+        .id = 1,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &usbh1_dmamask,
+        },
+        .resource = mxc_usbh1_resources,
+        .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+        {
+                .start = OTG_BASE_ADDR + 0x400,
+                .end = OTG_BASE_ADDR + 0x5ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_USB2,
+                .end = MXC_INT_USB2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_usbh2 = {
+        .name = "mxc-ehci",
+        .id = 2,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &usbh2_dmamask,
+        },
+        .resource = mxc_usbh2_resources,
+        .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-        [0] = {
+        {
                 .chip.label = "gpio-0",
                 .irq = MXC_INT_GPIO,
                 .base = IO_ADDRESS(GPIO_BASE_ADDR),
                 .virtual_irq_start = MXC_GPIO_IRQ_START,
-        },
-        [1] = {
+        }, {
                 .chip.label = "gpio-1",
                 .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-        },
-        [2] = {
+        }, {
                 .chip.label = "gpio-2",
                 .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-        },
-        [3] = {
+        }, {
                 .chip.label = "gpio-3",
                 .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-        },
-        [4] = {
+        }, {
                 .chip.label = "gpio-4",
                 .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-        },
-        [5] = {
+        }, {
                 .chip.label = "gpio-5",
                 .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 160,
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa9..d315406d6725 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
@@ -20,3 +19,11 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 000000000000..7b187606682c
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* UART4 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* I2C1 */
+        PD17_PF_I2C_DATA,
+        PD18_PF_I2C_CLK,
+        /* SDHC2 */
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        /* Quad UART's IRQ */
+        GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+        GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+        .width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+        .start = 0xc0000000,
+        .end   = 0xc3ffffff,
+        .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+        .name = "physmap-flash",
+        .id = 0,
+        .dev = {
+                .platform_data = &eukrea_cpuimx27_flash_data,
+        },
+        .num_resources = 1,
+        .resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+        {
+                .flags = IMXUART_HAVE_RTSCTS,
+        }, {
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &eukrea_cpuimx27_nor_mtd_device,
+        &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+        .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("pcf8563", 0x51),
+        },
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+        {
+                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+                .irq = IRQ_GPIOB(23),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+                .irq = IRQ_GPIOB(22),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+                .irq = IRQ_GPIOB(27),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+                .irq = IRQ_GPIOB(30),
+                .uartclk = 14745600,
+                .regshift = 1,
+                .iotype = UPIO_MEM,
+                .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+        }, {
+        }
+};
+
+static struct platform_device serial_device = {
+        .name = "serial8250",
+        .id = 0,
+        .dev = {
+                .platform_data = serial_platform_data,
+        },
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+        mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+                ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+        mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+        i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+                                ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+        mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+        /* SDHC2 can be used for Wifi */
+        mxc_register_device(&mxc_sdhc_device1, NULL);
+        /* in which case UART4 is also used for Bluetooth */
+        mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+        platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+        eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+        mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+        .init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx27_map_io,
+        .init_irq       = mx27_init_irq,
+        .init_machine   = eukrea_cpuimx27_init,
+        .timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 000000000000..7382b6d27ee1
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+        /* UART2 */
+        PE3_PF_UART2_CTS,
+        PE4_PF_UART2_RTS,
+        PE6_PF_UART2_TXD,
+        PE7_PF_UART2_RXD,
+        /* UART3 */
+        PE8_PF_UART3_TXD,
+        PE9_PF_UART3_RXD,
+        PE10_PF_UART3_CTS,
+        PE11_PF_UART3_RTS,
+        /* UART4 */
+        PB26_AF_UART4_RTS,
+        PB28_AF_UART4_TXD,
+        PB29_AF_UART4_CTS,
+        PB31_AF_UART4_RXD,
+        /* SDHC1*/
+        PE18_PF_SD1_D0,
+        PE19_PF_SD1_D1,
+        PE20_PF_SD1_D2,
+        PE21_PF_SD1_D3,
+        PE22_PF_SD1_CMD,
+        PE23_PF_SD1_CLK,
+        /* display */
+        PA5_PF_LSCLK,
+        PA6_PF_LD0,
+        PA7_PF_LD1,
+        PA8_PF_LD2,
+        PA9_PF_LD3,
+        PA10_PF_LD4,
+        PA11_PF_LD5,
+        PA12_PF_LD6,
+        PA13_PF_LD7,
+        PA14_PF_LD8,
+        PA15_PF_LD9,
+        PA16_PF_LD10,
+        PA17_PF_LD11,
+        PA18_PF_LD12,
+        PA19_PF_LD13,
+        PA20_PF_LD14,
+        PA21_PF_LD15,
+        PA22_PF_LD16,
+        PA23_PF_LD17,
+        PA28_PF_HSYNC,
+        PA29_PF_VSYNC,
+        PA30_PF_CONTRAST,
+        PA31_PF_OE_ACD,
+        /* SPI1 */
+        PD28_PF_CSPI1_SS0,
+        PD29_PF_CSPI1_SCLK,
+        PD30_PF_CSPI1_MISO,
+        PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+        {
+                .name                   = "led1",
+                .default_trigger        = "heartbeat",
+                .active_low             = 1,
+                .gpio                   = GPIO_PORTF | 16,
+        },
+        {
+                .name                   = "led2",
+                .default_trigger        = "none",
+                .active_low             = 1,
+                .gpio                   = GPIO_PORTF | 19,
+        },
+        {
+                .name                   = "backlight",
+                .default_trigger        = "backlight",
+                .active_low             = 0,
+                .gpio                   = GPIO_PORTE | 5,
+        },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+        .leds           = gpio_leds,
+        .num_leds       = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &gpio_led_info,
+        },
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+        {
+                .mode = {
+                        .name           = "CMO-QGVA",
+                        .refresh        = 60,
+                        .xres           = 320,
+                        .yres           = 240,
+                        .pixclock       = 156000,
+                        .hsync_len      = 30,
+                        .left_margin    = 38,
+                        .right_margin   = 20,
+                        .vsync_len      = 3,
+                        .upper_margin   = 15,
+                        .lower_margin   = 4,
+                },
+                .pcr            = 0xFAD08B80,
+                .bpp            = 16,
+        },
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+        .mode = eukrea_mbimx27_modes,
+        .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+        .pwmr           = 0x00A903FF,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+        {
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+        {
+                .flags = IMXUART_HAVE_RTSCTS,
+        },
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+        || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+        if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+                printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+                return;
+        }
+
+        gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+        return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+        .get_pendown_state      = ads7846_get_pendown_state,
+        .keep_vref_on           = 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+        [0] = {
+                .modalias       = "ads7846",
+                .bus_num        = 0,
+                .chip_select    = 0,
+                .max_speed_hz   = 1500000,
+                .irq            = IRQ_GPIOD(25),
+                .platform_data  = &ads7846_config,
+                .mode           = SPI_MODE_2,
+        },
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+        .chipselect     = eukrea_mbimx27_spi_cs,
+        .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+        &leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+        mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+                ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+        mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+        mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+        mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+        mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+        || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+        /* SPI and ADS7846 Touchscreen controler init */
+        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+        mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+        mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+        spi_register_board_info(eukrea_mbimx27_spi_board_info,
+                        ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+        ads7846_dev_init();
+#endif
+
+        /* Leds configuration */
+        mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+        mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+        /* Backlight */
+        mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8f..ae8f759134d1 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX21);
+        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,7 +80,18 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX27);
+        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+        mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb405..cf5f77cbc2f1 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
-static struct imx_fb_platform_data mx21ads_fb_data = {
-        .pixclock       = 188679, /* in ps */
-        .xres           = 240,
-        .yres           = 320,
-
-        .bpp            = 16,
-        .hsync_len      = 2,
-        .left_margin    = 6,
-        .right_margin   = 16,
+static struct imx_fb_videomode mx21ads_modes[] = {
+        {
+                .mode = {
+                        .name           = "Sharp-LQ035Q7",
+                        .refresh        = 60,
+                        .xres           = 240,
+                        .yres           = 320,
+                        .pixclock       = 188679, /* in ps (5.3MHz) */
+                        .hsync_len      = 2,
+                        .left_margin    = 6,
+                        .right_margin   = 16,
+                        .vsync_len      = 1,
+                        .upper_margin   = 8,
+                        .lower_margin   = 10,
+                },
+                .pcr            = 0xfb108bc7,
+                .bpp            = 16,
+        },
+};
 
-        .vsync_len      = 1,
-        .upper_margin   = 8,
-        .lower_margin   = 10,
-        .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx21ads_fb_data = {
+        .mode = mx21ads_modes,
+        .num_modes = ARRAY_SIZE(mx21ads_modes),
 
-        .pcr            = 0xFB108BC7,
-        .pwmr           = 0x00A901ff,
-        .lscr1          = 0x00120300,
-        .dmacr          = 0x00020008,
+        .pwmr           = 0x00a903ff,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00020008,
 
         .init = mx21ads_fb_init,
         .exit = mx21ads_fb_exit,
@@ -280,7 +288,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx21ads_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx21_init_irq,
         .init_machine   = mx21ads_board_init,
         .timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac6995..83e412b713e6 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
                 __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-        .pixclock       = 188679,
-        .xres           = 240,
-        .yres           = 320,
-
-        .bpp            = 16,
-        .hsync_len      = 1,
-        .left_margin    = 9,
-        .right_margin   = 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+        {
+                .mode = {
+                        .name           = "Sharp-LQ035Q7",
+                        .refresh        = 60,
+                        .xres           = 240,
+                        .yres           = 320,
+                        .pixclock       = 188679, /* in ps (5.3MHz) */
+                        .hsync_len      = 1,
+                        .left_margin    = 9,
+                        .right_margin   = 16,
+                        .vsync_len      = 1,
+                        .upper_margin   = 7,
+                        .lower_margin   = 9,
+                },
+                .bpp            = 16,
+                .pcr            = 0xFB008BC0,
+        },
+};
 
-        .vsync_len      = 1,
-        .upper_margin   = 7,
-        .lower_margin   = 9,
-        .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+        .mode = mx27ads_modes,
+        .num_modes = ARRAY_SIZE(mx27ads_modes),
 
         /*
          * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
          * - data enable low active
          * - enable sharp mode
          */
-        .pcr            = 0xFB008BC0,
         .pwmr           = 0x00A903FF,
         .lscr1          = 0x00120300,
         .dmacr          = 0x00020010,
@@ -330,7 +338,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx27ads_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx27_init_irq,
         .init_machine   = mx27ads_board_init,
         .timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04b..82ea227ea0cf 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx27_init_irq,
         .init_machine   = mx27lite_init,
         .timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c3..6761d1b79e43 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx27_init_irq,
         .init_machine   = mx27pdk_init,
         .timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 000000000000..fe5b165b88cc
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+        /* UART1 */
+        PE12_PF_UART1_TXD,
+        PE13_PF_UART1_RXD,
+        PE14_PF_UART1_CTS,
+        PE15_PF_UART1_RTS,
+        /* SDHC */
+        PB4_PF_SD2_D0,
+        PB5_PF_SD2_D1,
+        PB6_PF_SD2_D2,
+        PB7_PF_SD2_D3,
+        PB8_PF_SD2_CMD,
+        PB9_PF_SD2_CLK,
+        /* FEC */
+        PD0_AIN_FEC_TXD0,
+        PD1_AIN_FEC_TXD1,
+        PD2_AIN_FEC_TXD2,
+        PD3_AIN_FEC_TXD3,
+        PD4_AOUT_FEC_RX_ER,
+        PD5_AOUT_FEC_RXD1,
+        PD6_AOUT_FEC_RXD2,
+        PD7_AOUT_FEC_RXD3,
+        PD8_AF_FEC_MDIO,
+        PD9_AIN_FEC_MDC,
+        PD10_AOUT_FEC_CRS,
+        PD11_AOUT_FEC_TX_CLK,
+        PD12_AOUT_FEC_RXD0,
+        PD13_AOUT_FEC_RX_DV,
+        PD14_AOUT_FEC_RX_CLK,
+        PD15_AOUT_FEC_COL,
+        PD16_AIN_FEC_TX_ER,
+        PF23_AIN_FEC_TX_EN,
+        /* SSI1 */
+        PC20_PF_SSI1_FS,
+        PC21_PF_SSI1_RXD,
+        PC22_PF_SSI1_TXD,
+        PC23_PF_SSI1_CLK,
+        /* onboard I2C */
+        PC5_PF_I2C2_SDA,
+        PC6_PF_I2C2_SCL,
+        /* external I2C */
+        PD17_PF_I2C_DATA,
+        PD18_PF_I2C_CLK,
+        /* SPI1 */
+        PD25_PF_CSPI1_RDY,
+        PD29_PF_CSPI1_SCLK,
+        PD30_PF_CSPI1_MISO,
+        PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+        &mxc_w1_master_device,
+        &mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+        .bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+        .byte_len = 4096,
+        .page_size = 32,
+        .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+                .platform_data = &board_eeprom,
+        }, {
+                I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+                .type = "pcf8563"
+        }, {
+                I2C_BOARD_INFO("lm75", 0x4a),
+                .type = "lm75"
+        }
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+        .name           = "at25320an",
+        .byte_len       = 4096,
+        .page_size      = 32,
+        .flags          = EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+        {
+                .modalias = "at25",
+                .max_speed_hz = 30000,
+                .bus_num = 0,
+                .chip_select = 1,
+                .platform_data = &at25320,
+        },
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+        .chipselect     = pca100_spi_cs,
+        .num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                void *data)
+{
+        int ret;
+
+        ret = request_irq(IRQ_GPIOC(29), detect_irq,
+                          IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                          "imx-mmc-detect", data);
+        if (ret)
+                printk(KERN_ERR
+                        "pca100: Failed to reuest irq for sd/mmc detection\n");
+
+        return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+        free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+        .init = pca100_sdhc2_init,
+        .exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+        int ret;
+
+        ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+                        ARRAY_SIZE(pca100_pins), "PCA100");
+        if (ret)
+                printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+        mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+        mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+        mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+        /* only the i2c master 1 is used on this CPU card */
+        i2c_register_board_info(1, pca100_i2c_devices,
+                                ARRAY_SIZE(pca100_i2c_devices));
+
+        mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+        mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+        mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+        /* GPIO0_IRQ */
+        mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+        /* GPIO1_IRQ */
+        mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+        /* GPIO2_IRQ */
+        mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+        spi_register_board_info(pca100_spi_board_info,
+                                ARRAY_SIZE(pca100_spi_board_info));
+        mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+        mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+        .init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+        .phys_io        = AIPI_BASE_ADDR,
+        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx27_map_io,
+        .init_irq       = mxc_init_irq,
+        .init_machine   = pca100_init,
+        .timer          = &pca100_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d004343..ee65dda584cf 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-        [0] = {
+        {
                 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
                 .platform_data = &board_eeprom,
-        },
-        [1] = {
-                I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-                .type = "pcf8563"
-        },
-        [2] = {
+        }, {
+                I2C_BOARD_INFO("pcf8563", 0x51),
+        }, {
                 I2C_BOARD_INFO("lm75", 0x4a),
-                .type = "lm75"
         }
 };
 
@@ -220,6 +216,9 @@ static void __init pcm038_init(void)
 
         mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+        /* PE18 for user-LED D40 */
+        mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -241,7 +240,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
         .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx27_init_irq,
         .init_machine   = pcm038_init,
         .timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd4..c261f59b0b4c 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -125,40 +126,96 @@ static struct imxmmc_platform_data sdhc_pdata = {
         .exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-        .pixclock       = 188679, /* in ps (5.3MHz) */
-        .xres           = 240,
-        .yres           = 320,
-
-        .bpp            = 16,
-        .hsync_len      = 7,
-        .left_margin    = 5,
-        .right_margin   = 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+        {
+                .mode = {
+                        .name           = "Sharp-LQ035Q7",
+                        .refresh        = 60,
+                        .xres           = 240,
+                        .yres           = 320,
+                        .pixclock       = 188679, /* in ps (5.3MHz) */
+                        .hsync_len      = 7,
+                        .left_margin    = 5,
+                        .right_margin   = 16,
+                        .vsync_len      = 1,
+                        .upper_margin   = 7,
+                        .lower_margin   = 9,
+                },
+                /*
+                 * - HSYNC active high
+                 * - VSYNC active high
+                 * - clk notenabled while idle
+                 * - clock not inverted
+                 * - data not inverted
+                 * - data enable low active
+                 * - enable sharp mode
+                 */
+                .pcr            = 0xF00080C0,
+                .bpp            = 16,
+        }, {
+                .mode = {
+                        .name           = "TX090",
+                        .refresh        = 60,
+                        .xres           = 240,
+                        .yres           = 320,
+                        .pixclock       = 38255,
+                        .left_margin    = 144,
+                        .right_margin   = 0,
+                        .upper_margin   = 7,
+                        .lower_margin   = 40,
+                        .hsync_len      = 96,
+                        .vsync_len      = 1,
+                },
+                /*
+                 * - HSYNC active low (1 << 22)
+                 * - VSYNC active low (1 << 23)
+                 * - clk notenabled while idle
+                 * - clock not inverted
+                 * - data not inverted
+                 * - data enable low active
+                 * - enable sharp mode
+                 */
+                .pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+                .bpp = 32,
+        },
+};
 
-        .vsync_len      = 1,
-        .upper_margin   = 7,
-        .lower_margin   = 9,
-        .fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+        .mode = pcm970_modes,
+        .num_modes = ARRAY_SIZE(pcm970_modes),
 
-        /*
-         * - HSYNC active high
-         * - VSYNC active high
-         * - clk notenabled while idle
-         * - clock not inverted
-         * - data not inverted
-         * - data enable low active
-         * - enable sharp mode
-         */
-        .pcr            = 0xFA0080C0,
         .pwmr           = 0x00A903FF,
         .lscr1          = 0x00120300,
         .dmacr          = 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+        {
+                .start   = CS4_BASE_ADDR,
+                .end     = CS4_BASE_ADDR + 0x100 - 1,
+                .flags   = IORESOURCE_MEM,
+        }, {
+                .start   = IRQ_GPIOE(19),
+                .end     = IRQ_GPIOE(19),
+                .flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+        },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+        .clock          = 16000000 / 2,
+        .ocr            = 0x40 | 0x18,
+        .cdr            = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+        .name = "sja1000_platform",
+        .dev = {
+                .platform_data = &pcm970_sja1000_platform_data,
+        },
+        .resource = pcm970_sja1000_resources,
+        .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -172,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
         mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
         mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+        platform_device_register(&pcm970_sja1000);
 }
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 000000000000..cc28f56eae80
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,9 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+        select ARCH_MXC_IOMUX_V3
+        bool "Support MX25PDK (3DS) Platform"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 000000000000..fe23836a9f3d
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,3 @@
+obj-y                           := mm.o devices.o
+obj-$(CONFIG_ARCH_MX25)         += clock.o
+obj-$(CONFIG_MACH_MX25_3DS)     += mx25pdk.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 000000000000..e1dd366f836b
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x80008000
+params_phys-y   := 0x80000100
+initrd_phys-y   := 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 000000000000..ef26951a5275
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE        MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL       0x00
+#define CCM_UPCTL       0x04
+#define CCM_CCTL        0x08
+#define CCM_CGCR0       0x0C
+#define CCM_CGCR1       0x10
+#define CCM_CGCR2       0x14
+#define CCM_PCDR0       0x18
+#define CCM_PCDR1       0x1C
+#define CCM_PCDR2       0x20
+#define CCM_PCDR3       0x24
+#define CCM_RCSR        0x28
+#define CCM_CRDR        0x2C
+#define CCM_DCVR0       0x30
+#define CCM_DCVR1       0x34
+#define CCM_DCVR2       0x38
+#define CCM_DCVR3       0x3c
+#define CCM_LTR0        0x40
+#define CCM_LTR1        0x44
+#define CCM_LTR2        0x48
+#define CCM_LTR3        0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+        ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+        return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+        ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+        return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+        unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+        unsigned long rate = get_rate_mpll();
+
+        if (cctl & (1 << 14))
+                rate = (rate * 3) >> 1;
+
+        return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+        unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+        return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+        return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+        unsigned long ofs = (per & 0x3) * 8;
+        unsigned long reg = per & ~0x3;
+        unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+        unsigned long fref;
+
+        if (readl(CRM_BASE + 0x64) & (1 << per))
+                fref = get_rate_upll();
+        else
+                fref = get_rate_ipg(NULL);
+
+        return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+        return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+        return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+        return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+        return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= 1 << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(1 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)           \
+        static struct clk name = {                      \
+                .id             = i,                    \
+                .enable_reg     = CRM_BASE + er,        \
+                .enable_shift   = es,                   \
+                .get_rate       = gr,                   \
+                .set_rate       = sr,                   \
+                .enable         = clk_cgcr_enable,      \
+                .disable        = clk_cgcr_disable,     \
+        }
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk,   0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk,   0, CCM_CGCR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk,   0, CCM_CGCR2,  1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk,   0, CCM_CGCR2,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk,    0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk,    0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk,    0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)        \
+        {                               \
+                .dev_id = d,            \
+                .con_id = n,            \
+                .clk = &c,              \
+        },
+
+static struct clk_lookup lookups[] = {
+        _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+        _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+        _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+        _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+        _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+        _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+        _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+        _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+        _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+        _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+        _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+        _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+        _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+        _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+        _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+        _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+        _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+        _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+        _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+
+        mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+        return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 000000000000..eb12de1da42d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+        {
+                .start = 0x43f90000,
+                .end = 0x43f93fff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 45,
+                .end = 45,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device0 = {
+        .name = "imx-uart",
+        .id = 0,
+        .resource = uart0,
+        .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+        {
+                .start = 0x43f94000,
+                .end = 0x43f97fff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 32,
+                .end = 32,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device1 = {
+        .name = "imx-uart",
+        .id = 1,
+        .resource = uart1,
+        .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+        {
+                .start = 0x5000c000,
+                .end = 0x5000ffff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 18,
+                .end = 18,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device2 = {
+        .name = "imx-uart",
+        .id = 2,
+        .resource = uart2,
+        .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+        {
+                .start = 0x50008000,
+                .end = 0x5000bfff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 5,
+                .end = 5,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device3 = {
+        .name = "imx-uart",
+        .id = 3,
+        .resource = uart3,
+        .num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+        {
+                .start = 0x5002c000,
+                .end = 0x5002ffff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 40,
+                .end = 40,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device4 = {
+        .name = "imx-uart",
+        .id = 4,
+        .resource = uart4,
+        .num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+        {
+                .start = MX25_OTG_BASE_ADDR,
+                .end = MX25_OTG_BASE_ADDR + 0x1ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 37,
+                .end = 37,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_otg = {
+        .name = "mxc-ehci",
+        .id = 0,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &otg_dmamask,
+        },
+        .resource = mxc_otg_resources,
+        .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+        .name = "fsl-usb2-udc",
+        .id   = -1,
+        .dev  = {
+                .dma_mask          = &otg_dmamask,
+                .coherent_dma_mask = 0xffffffff,
+        },
+        .resource = mxc_otg_resources,
+        .num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+        {
+                .start = MX25_OTG_BASE_ADDR + 0x400,
+                .end = MX25_OTG_BASE_ADDR + 0x5ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 35,
+                .end = 35,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_usbh2 = {
+        .name = "mxc-ehci",
+        .id = 1,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &usbh2_dmamask,
+        },
+        .resource = mxc_usbh2_resources,
+        .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+        {
+               .start = 0x43fa4000,
+               .end = 0x43fa7fff,
+               .flags = IORESOURCE_MEM,
+        }, {
+               .start = 14,
+               .end = 14,
+               .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_spi_device0 = {
+        .name = "spi_imx",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources0),
+        .resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+        {
+               .start = 0x50010000,
+               .end = 0x50013fff,
+               .flags = IORESOURCE_MEM,
+        }, {
+               .start = 13,
+               .end = 13,
+               .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_spi_device1 = {
+        .name = "spi_imx",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources1),
+        .resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+        {
+               .start = 0x50004000,
+               .end = 0x50007fff,
+               .flags = IORESOURCE_MEM,
+        }, {
+               .start = 0,
+               .end = 0,
+               .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_spi_device2 = {
+        .name = "spi_imx",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(mxc_spi_resources2),
+        .resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+        {
+                .start  = 0x53fe0000,
+                .end    = 0x53fe3fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start   = 26,
+                .end     = 26,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_pwm_device0 = {
+        .name = "mxc_pwm",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+        .resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+        {
+                .start  = 0x53fa0000,
+                .end    = 0x53fa3fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start   = 36,
+                .end     = 36,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_pwm_device1 = {
+        .name = "mxc_pwm",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+        .resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+        {
+                .start  = 0x53fa8000,
+                .end    = 0x53fabfff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start   = 41,
+                .end     = 41,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_pwm_device2 = {
+        .name = "mxc_pwm",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+        .resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+        {
+                .start  = 0x43fa8000,
+                .end    = 0x43fabfff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start   = 24,
+                .end     = 24,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_keypad_device = {
+        .name = "mxc-keypad",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(mxc_keypad_resources),
+        .resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+        {
+                .start  = 0x53fc8000,
+                .end    = 0x53fcbfff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start   = 42,
+                .end     = 42,
+                .flags   = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_pwm_device3 = {
+        .name = "mxc_pwm",
+        .id = 3,
+        .num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+        .resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+        {
+                .start  = 0x43f80000,
+                .end    = 0x43f83fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 3,
+                .end    = 3,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_i2c_device0 = {
+        .name = "imx-i2c",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+        .resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+        {
+                .start  = 0x43f98000,
+                .end    = 0x43f9bfff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 4,
+                .end    = 4,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_i2c_device1 = {
+        .name = "imx-i2c",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+        .resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+        {
+                .start  = 0x43f84000,
+                .end    = 0x43f87fff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 10,
+                .end    = 10,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+struct platform_device mxc_i2c_device2 = {
+        .name = "imx-i2c",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+        .resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+        {
+                .chip.label = "gpio-0",
+                .base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+                .irq = 52,
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
+        }, {
+                .chip.label = "gpio-1",
+                .base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+                .irq = 51,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+        }, {
+                .chip.label = "gpio-2",
+                .base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+                .irq = 16,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+        }, {
+                .chip.label = "gpio-3",
+                .base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+                .irq = 23,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+        }
+};
+
+int __init mxc_register_gpios(void)
+{
+        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 000000000000..fe6bf88ad1dd
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 000000000000..a7e587ff3e9e
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+        {
+                .virtual        = MX25_AVIC_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+                .length         = MX25_AVIC_SIZE,
+                .type           = MT_DEVICE_NONSHARED
+        }, {
+                .virtual        = MX25_AIPS1_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+                .length         = MX25_AIPS1_SIZE,
+                .type           = MT_DEVICE_NONSHARED
+        }, {
+                .virtual        = MX25_AIPS2_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+                .length         = MX25_AIPS2_SIZE,
+                .type           = MT_DEVICE_NONSHARED
+        },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+        mxc_set_cpu_type(MXC_CPU_MX25);
+        mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+        mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+        mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 000000000000..92aa4fd19d99
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+        .width = 1,
+        .hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        mxc_register_device(&mxc_usbh2, NULL);
+        mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+        mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+        .init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+        /* Maintainer: Freescale Semiconductor, Inc. */
+        .phys_io        = MX25_AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mx25_map_io,
+        .init_irq       = mx25_init_irq,
+        .init_machine   = mx25pdk_init,
+        .timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 17a21a291e2f..851f2458bf65 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -36,6 +36,14 @@ config MACH_PCM037
           Include support for Phytec pcm037 platform. This includes
           specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+        bool "Support pcm037 EET board extensions"
+        depends on MACH_PCM037
+        help
+          Add support for PCM037 EET baseboard extensions. If you are using the
+          OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+          command-line parameter.
+
 config MACH_MX31LITE
         bool "Support MX31 LITEKIT (LogicPD)"
         select ARCH_MX31
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 0322696bd11a..6b9775471be6 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)    += mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)     += mx31lite.o
 obj-$(CONFIG_MACH_PCM037)       += pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)   += pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)     += mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)  += mx31moboard.o mx31moboard-devboard.o \
                                    mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 541181090b37..776c0ee1b3cd 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
         /* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
         MX31_PIN_FPSHIFT__FPSHIFT,
         MX31_PIN_DRDY0__DRDY0,
         IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+        .width          = 1,
+        .hw_ecc         = 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+        {
+                .name           = "nor.bootloader",
+                .offset         = 0x00000000,
+                .size           = 4*32*1024,
+        }, {
+                .name           = "nor.kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 16*128*1024,
+        }, {
+                .name           = "nor.userland",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 110*128*1024,
+        }, {
+                .name           = "nor.config",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 1*128*1024,
+        },
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+        .width          = 2,
+        .parts          = armadillo5x0_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = CS0_BASE_ADDR,
+        .end            = CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = -1,
+        .num_resources          = 1,
+        .resource               = &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
         /* Register FB */
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+        /* Register NOR Flash */
+        mxc_register_device(&armadillo5x0_nor_flash,
+                            &armadillo5x0_nor_flash_pdata);
+
+        /* Register NAND Flash */
+        mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+        /* set NAND page size to 2k if not configured via boot mode pins */
+        __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)
@@ -289,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x00000100,
         .map_io         = mx31_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .timer          = &armadillo5x0_timer,
         .init_machine   = armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f60..fe5c4217322e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
         return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
 }
 
+static unsigned long get_rate_otg(struct clk *clk)
+{
+        unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+        unsigned long rate;
+
+        if (pdr4 & (1 << 9))
+                rate = get_rate_arm();
+        else
+                rate = get_rate_ppll();
+
+        return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
         unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
 DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
 DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
 DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
         _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
         _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-        _REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+        _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
         _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
         _REGISTER_CLOCK(NULL, "max", max_clk)
         _REGISTER_CLOCK(NULL, "admux", admux_clk)
@@ -456,7 +472,7 @@ int __init mx35_clocks_init()
         __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
         __raw_writel(0, CCM_BASE + CCM_CGR3);
 
-        mxc_timer_init(&gpt_clk);
+        mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c9..06bd6180bfc3 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/mx31.h>
 #include <mach/common.h>
 
 #include "crm_regs.h"
@@ -402,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
         return ckih_rate;
 }
 
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+        return CKIL_CLK_FREQ;
+}
+
 static struct clk ckih_clk = {
         .get_rate = clk_ckih_get_rate,
 };
@@ -508,6 +514,7 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
         { \
@@ -518,9 +525,9 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 
 static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK(NULL, "emi", emi_clk)
-        _REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
-        _REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
-        _REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+        _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+        _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+        _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
         _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
         _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
         _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
@@ -531,6 +538,12 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
         _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
         _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+        _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
         _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
         _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
         _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
@@ -559,6 +572,7 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK(NULL, "iim", iim_clk)
         _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
         _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+        _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
@@ -609,7 +623,7 @@ int __init mx31_clocks_init(unsigned long fref)
                 __raw_writel(reg, MXC_CCM_PMCR1);
         }
 
-        mxc_timer_init(&ipg_clk);
+        mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb121..8a577f367250 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-        [0] = {
+        {
                 .chip.label = "gpio-0",
                 .base = IO_ADDRESS(GPIO1_BASE_ADDR),
                 .irq = MXC_INT_GPIO1,
                 .virtual_irq_start = MXC_GPIO_IRQ_START,
-        },
-        [1] = {
+        }, {
                 .chip.label = "gpio-1",
                 .base = IO_ADDRESS(GPIO2_BASE_ADDR),
                 .irq = MXC_INT_GPIO2,
                 .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-        },
-        [2] = {
+        }, {
                 .chip.label = "gpio-2",
                 .base = IO_ADDRESS(GPIO3_BASE_ADDR),
                 .irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
         {
                 .start  = 0, /* runtime dependent */
                 .end    = 0,
-                .flags  = IORESOURCE_MEM
+                .flags  = IORESOURCE_MEM,
         }, {
                 .start  = MXC_INT_NANDFC,
                 .end    = MXC_INT_NANDFC,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
                 .start = I2C_BASE_ADDR,
                 .end = I2C_BASE_ADDR + SZ_4K - 1,
                 .flags = IORESOURCE_MEM,
-        },
-        {
+        }, {
                 .start = MXC_INT_I2C,
                 .end = MXC_INT_I2C,
                 .flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
                 .start = I2C2_BASE_ADDR,
                 .end = I2C2_BASE_ADDR + SZ_4K - 1,
                 .flags = IORESOURCE_MEM,
-        },
-        {
+        }, {
                 .start = MXC_INT_I2C2,
                 .end = MXC_INT_I2C2,
                 .flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
                 .start = I2C3_BASE_ADDR,
                 .end = I2C3_BASE_ADDR + SZ_4K - 1,
                 .flags = IORESOURCE_MEM,
-        },
-        {
+        }, {
                 .start = MXC_INT_I2C3,
                 .end = MXC_INT_I2C3,
                 .flags = IORESOURCE_IRQ,
@@ -371,8 +366,8 @@ struct platform_device mx3_camera = {
 
 static struct resource otg_resources[] = {
         {
-                .start  = OTG_BASE_ADDR,
-                .end    = OTG_BASE_ADDR + 0x1ff,
+                .start  = MX31_OTG_BASE_ADDR,
+                .end    = MX31_OTG_BASE_ADDR + 0x1ff,
                 .flags  = IORESOURCE_MEM,
         }, {
                 .start  = MXC_INT_USB3,
@@ -395,16 +390,142 @@ struct platform_device mxc_otg_udc_device = {
         .num_resources  = ARRAY_SIZE(otg_resources),
 };
 
+/* OTG host */
+struct platform_device mxc_otg_host = {
+        .name = "mxc-ehci",
+        .id = 0,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &otg_dmamask,
+        },
+        .resource = otg_resources,
+        .num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+        {
+                .start = MX31_OTG_BASE_ADDR + 0x200,
+                .end = MX31_OTG_BASE_ADDR + 0x3ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_USB1,
+                .end = MXC_INT_USB1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_usbh1 = {
+        .name = "mxc-ehci",
+        .id = 1,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &usbh1_dmamask,
+        },
+        .resource = mxc_usbh1_resources,
+        .num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+        {
+                .start = MX31_OTG_BASE_ADDR + 0x400,
+                .end = MX31_OTG_BASE_ADDR + 0x5ff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_USB2,
+                .end = MXC_INT_USB2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_usbh2 = {
+        .name = "mxc-ehci",
+        .id = 2,
+        .dev = {
+                .coherent_dma_mask = 0xffffffff,
+                .dma_mask = &usbh2_dmamask,
+        },
+        .resource = mxc_usbh2_resources,
+        .num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+        {
+               .start = CSPI1_BASE_ADDR,
+               .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+               .flags = IORESOURCE_MEM,
+        }, {
+               .start = MXC_INT_CSPI1,
+               .end = MXC_INT_CSPI1,
+               .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource imx_spi_1_resources[] = {
+        {
+                .start = CSPI2_BASE_ADDR,
+                .end = CSPI2_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_CSPI2,
+                .end = MXC_INT_CSPI2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource imx_spi_2_resources[] = {
+        {
+                .start = CSPI3_BASE_ADDR,
+                .end = CSPI3_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC_INT_CSPI3,
+                .end = MXC_INT_CSPI3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device imx_spi_device0 = {
+        .name = "spi_imx",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(imx_spi_0_resources),
+        .resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+        .name = "spi_imx",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(imx_spi_1_resources),
+        .resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+        .name = "spi_imx",
+        .id = 2,
+        .num_resources = ARRAY_SIZE(imx_spi_2_resources),
+        .resource = imx_spi_2_resources,
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
         {
                 .start  = MXC_FEC_BASE_ADDR,
                 .end    = MXC_FEC_BASE_ADDR + 0xfff,
-                .flags  = IORESOURCE_MEM
+                .flags  = IORESOURCE_MEM,
         }, {
                 .start  = MXC_INT_FEC,
                 .end    = MXC_INT_FEC,
-                .flags  = IORESOURCE_IRQ
+                .flags  = IORESOURCE_IRQ,
         },
 };
 
@@ -426,6 +547,14 @@ static int mx3_devices_init(void)
         if (cpu_is_mx35()) {
                 mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
                 mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+                otg_resources[0].start = MX35_OTG_BASE_ADDR;
+                otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+                otg_resources[1].start = MXC_INT_USBOTG;
+                otg_resources[1].end = MXC_INT_USBOTG;
+                mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+                mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+                mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+                mxc_usbh1_resources[1].end = MXC_INT_USBHS;
         }
 
         return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4ac..79f2be45d139 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,11 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
 
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb9..ad5a1122d765 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-v3.h>
 
 /*!
  * @file mm.c
@@ -75,6 +76,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX31);
+        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -82,10 +84,22 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX35);
+        mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
+        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
         iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx31_init_irq(void)
+{
+        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+        mx31_init_irq();
+}
+
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
 {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78ae..0497c152be18 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
 
 static void __init mx31ads_init_irq(void)
 {
-        mxc_init_irq();
+        mx31_init_irq();
         mx31ads_init_expio();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb95..423025150f6f 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mx31lilly_board_init,
         .timer          = &mx31lilly_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e13..a8d57decdfdb 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct resource smsc911x_resources[] = {
-        [0] = {
+        {
                 .start          = CS4_BASE_ADDR,
                 .end            = CS4_BASE_ADDR + 0x100,
                 .flags          = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start          = IOMUX_TO_IRQ(MX31_PIN_SFS6),
                 .end            = IOMUX_TO_IRQ(MX31_PIN_SFS6),
                 .flags          = IORESOURCE_IRQ,
@@ -162,7 +161,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31lite_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a1..b3e8f251ac79 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
         MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
         MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
         MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-        /* USB OTG */
-        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-        MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-        MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-        MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,33 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
         .exit   = devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-        .operating_mode = FSL_USB2_DR_DEVICE,
-        .phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
-        gpio_request(OTG_EN_B, "usb-udc-en");
-        gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -151,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
         mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
         mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-        devboard_usbotg_init();
-        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153ae..3e2b73051b94 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -48,18 +47,8 @@ static unsigned int marxbot_pins[] = {
         MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
         MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
         MX31_PIN_TXD2__GPIO1_28,
-        /* USB OTG */
-        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-        MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-        MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-        MX31_PIN_USB_OC__GPIO1_30,
+        /* dsPIC resets */
+        MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,31 +104,20 @@ static struct imxmmc_platform_data sdhc2_pdata = {
         .exit   = marxbot_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-        .operating_mode = FSL_USB2_DR_DEVICE,
-        .phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define TRSLAT_RST_B    IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B    IOMUX_TO_GPIO(MX31_PIN_SRXD5)
 
-static void marxbot_usbotg_init(void)
+static void dspics_resets_init(void)
 {
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
-        gpio_request(OTG_EN_B, "usb-udc-en");
-        gpio_direction_output(OTG_EN_B, 0);
+        if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+                gpio_direction_output(TRSLAT_RST_B, 1);
+                gpio_export(TRSLAT_RST_B, false);
+        }
+
+        if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+                gpio_direction_output(DSPICS_RST_B, 1);
+                gpio_export(DSPICS_RST_B, false);
+        }
 }
 
 /*
@@ -152,8 +130,7 @@ void __init mx31moboard_marxbot_init(void)
         mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
                 "marxbot");
 
-        mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+        dspics_resets_init();
 
-        marxbot_usbotg_init();
-        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+        mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e411609..d3c6bb26271f 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,9 +16,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
+#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -36,6 +39,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
+#include <mach/mx31.h>
 
 #include "devices.h"
 
@@ -55,6 +59,26 @@ static unsigned int moboard_pins[] = {
         MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
         MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
         MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+        /* USB reset */
+        MX31_PIN_GPIO1_0__GPIO1_0,
+        /* USB OTG */
+        MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+        MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+        MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+        MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+        MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+        MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+        MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+        MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+        MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+        MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+        MX31_PIN_USB_OC__GPIO1_30,
+        /* LEDs */
+        MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+        MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+        /* SEL */
+        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -142,8 +166,109 @@ static struct imxmmc_platform_data sdhc1_pdata = {
         .exit   = moboard_sdhc1_exit,
 };
 
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B     IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+        gpio_request(USB_RESET_B, "usb-reset");
+        gpio_direction_output(USB_RESET_B, 0);
+        mdelay(1);
+        gpio_set_value(USB_RESET_B, 1);
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+                        PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+        gpio_request(OTG_EN_B, "usb-udc-en");
+        gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static struct gpio_led mx31moboard_leds[] = {
+        {
+                .name   = "coreboard-led-0:red:running",
+                .default_trigger = "heartbeat",
+                .gpio   = IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+        }, {
+                .name   = "coreboard-led-1:red",
+                .gpio   = IOMUX_TO_GPIO(MX31_PIN_STX0),
+        }, {
+                .name   = "coreboard-led-2:red",
+                .gpio   = IOMUX_TO_GPIO(MX31_PIN_SRX0),
+        }, {
+                .name   = "coreboard-led-3:red",
+                .gpio   = IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+        },
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+        .num_leds       = ARRAY_SIZE(mx31moboard_leds),
+        .leds           = mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &mx31moboard_led_pdata,
+        },
+};
+
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+        if (!gpio_request(SEL0, "sel0")) {
+                gpio_direction_input(SEL0);
+                gpio_export(SEL0, true);
+        }
+
+        if (!gpio_request(SEL1, "sel1")) {
+                gpio_direction_input(SEL1);
+                gpio_export(SEL1, true);
+        }
+
+        if (!gpio_request(SEL2, "sel2")) {
+                gpio_direction_input(SEL2);
+                gpio_export(SEL2, true);
+        }
+
+        if (!gpio_request(SEL3, "sel3")) {
+                gpio_direction_input(SEL3);
+                gpio_export(SEL3, true);
+        }
+}
+
 static struct platform_device *devices[] __initdata = {
         &mx31moboard_flash,
+        &mx31moboard_leds_device,
 };
 
 static int mx31moboard_baseboard;
@@ -162,11 +287,18 @@ static void __init mxc_board_init(void)
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
         mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+        mx31moboard_init_sel_gpios();
+
         mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
         mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
         mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+        usb_xcvr_reset();
+
+        moboard_usbotg_init();
+        mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
         switch (mx31moboard_baseboard) {
         case MX31NOBOARD:
                 break;
@@ -197,7 +329,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31moboard_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e369..0f7a2f06bc2d 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31pdk_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx31pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b9..6ff186e46ceb 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx35_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx35_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &mx35pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c6f61a1f06c8..6cbaabedf386 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -32,30 +32,69 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
+
+#include <media/soc_camera.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+        if (!strcmp("eet", str))
+                pcm037_instance = PCM037_EET;
+        else if (strcmp("pcm970", str))
+                pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+        return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+        return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
         /* I2C */
         MX31_PIN_CSPI2_MOSI__SCL,
         MX31_PIN_CSPI2_MISO__SDA,
+        MX31_PIN_CSPI2_SS2__I2C3_SDA,
+        MX31_PIN_CSPI2_SCLK__I2C3_SCL,
         /* SDHC1 */
         MX31_PIN_SD1_DATA3__SD1_DATA3,
         MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +112,6 @@ static unsigned int pcm037_pins[] = {
         MX31_PIN_CSPI1_SS0__SS0,
         MX31_PIN_CSPI1_SS1__SS1,
         MX31_PIN_CSPI1_SS2__SS2,
-        /* UART1 */
-        MX31_PIN_CTS1__CTS1,
-        MX31_PIN_RTS1__RTS1,
-        MX31_PIN_TXD1__TXD1,
-        MX31_PIN_RXD1__RXD1,
         /* UART2 */
         MX31_PIN_TXD2__TXD2,
         MX31_PIN_RXD2__RXD2,
@@ -120,6 +154,24 @@ static unsigned int pcm037_pins[] = {
         MX31_PIN_D3_SPL__D3_SPL,
         MX31_PIN_D3_CLS__D3_CLS,
         MX31_PIN_LCS0__GPI03_23,
+        /* CSI */
+        IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+        MX31_PIN_CSI_D6__CSI_D6,
+        MX31_PIN_CSI_D7__CSI_D7,
+        MX31_PIN_CSI_D8__CSI_D8,
+        MX31_PIN_CSI_D9__CSI_D9,
+        MX31_PIN_CSI_D10__CSI_D10,
+        MX31_PIN_CSI_D11__CSI_D11,
+        MX31_PIN_CSI_D12__CSI_D12,
+        MX31_PIN_CSI_D13__CSI_D13,
+        MX31_PIN_CSI_D14__CSI_D14,
+        MX31_PIN_CSI_D15__CSI_D15,
+        MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+        MX31_PIN_CSI_MCLK__CSI_MCLK,
+        MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+        MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+        /* GPIO */
+        IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -195,12 +247,11 @@ static struct imxuart_platform_data uart_pdata = {
 };
 
 static struct resource smsc911x_resources[] = {
-        [0] = {
+        {
                 .start          = CS1_BASE_ADDR + 0x300,
                 .end            = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
                 .flags          = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start          = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
                 .end            = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
                 .flags          = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
@@ -250,27 +301,57 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
         .hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
         .bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+        .bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
         .byte_len = 4096,
         .page_size = 32,
         .flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+        /* disable or enable the camera in X7 or X8 PCM970 connector */
+        gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+        return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+        {
+                I2C_BOARD_INFO("mt9t031", 0x5d),
+        },
+};
+
+static struct soc_camera_link iclink = {
+        .bus_id         = 0,            /* Must match with the camera ID */
+        .power          = pcm037_camera_power,
+        .board_info     = &pcm037_i2c_2_devices[0],
+        .i2c_adapter_id = 2,
+        .module_name    = "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+        {
                 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
                 .platform_data = &board_eeprom,
         }, {
-                I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-                .type = "pcf8563",
+                I2C_BOARD_INFO("pcf8563", 0x51),
         }
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+        .name   = "soc-camera-pdrv",
+        .id     = 0,
+        .dev    = {
+                .platform_data = &iclink,
+        },
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +415,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
         .exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+        .dma_dev        = &mx3_ipu.dev,
+        .flags          = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+        .mclk_10khz     = 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+        dma_addr_t dma_handle;
+        void *buf;
+        int dma;
+
+        if (buf_size < 2 * 1024 * 1024)
+                return -EINVAL;
+
+        buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+        if (!buf) {
+                pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+                return -ENOMEM;
+        }
+
+        memset(buf, 0, buf_size);
+
+        dma = dma_declare_coherent_memory(&mx3_camera.dev,
+                                        dma_handle, dma_handle, buf_size,
+                                        DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+        /* The way we call dma_declare_coherent_memory only a malloc can fail */
+        return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
         &pcm037_flash,
         &pcm037_sram_device,
+        &pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +490,22 @@ static const struct fb_videomode fb_modedb[] = {
                 .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
                 .vmode          = FB_VMODE_NONINTERLACED,
                 .flag           = 0,
+        }, {
+                /* 240x320 @ 60 Hz */
+                .name           = "CMEL-OLED",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 185925,
+                .left_margin    = 9,
+                .right_margin   = 16,
+                .upper_margin   = 7,
+                .lower_margin   = 9,
+                .hsync_len      = 1,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
         },
 };
 
@@ -387,6 +516,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
         .num_modes      = ARRAY_SIZE(fb_modedb),
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+        {
+                .start   = CS5_BASE_ADDR,
+                .end     = CS5_BASE_ADDR + 0x100 - 1,
+                .flags   = IORESOURCE_MEM,
+        }, {
+                .start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+                .end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+                .flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+        },
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+        .clock          = 16000000 / 2,
+        .ocr            = 0x40 | 0x18,
+        .cdr            = 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+        .name = "sja1000_platform",
+        .dev = {
+                .platform_data = &pcm970_sja1000_platform_data,
+        },
+        .resource = pcm970_sja1000_resources,
+        .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * Board specific initialization.
  */
@@ -397,6 +553,14 @@ static void __init mxc_board_init(void)
         mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
                         "pcm037");
 
+        if (pcm037_variant() == PCM037_EET)
+                mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+                        ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+        else
+                mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+                        ARRAY_SIZE(pcm037_uart1_handshake_pins),
+                        "pcm037_uart1");
+
         platform_add_devices(devices, ARRAY_SIZE(devices));
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +579,32 @@ static void __init mxc_board_init(void)
         }
 
 
-#ifdef CONFIG_I2C_IMX
+        /* I2C adapters and devices */
         i2c_register_board_info(1, pcm037_i2c_devices,
                         ARRAY_SIZE(pcm037_i2c_devices));
 
         mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+        mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
         mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
         mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
         if (!gpio_usbotg_hs_activate())
                 mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+        /* CSI */
+        /* Camera power: default - off */
+        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+        if (!ret)
+                gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+        else
+                iclink.power = NULL;
+
+        if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+                mxc_register_device(&mx3_camera, &camera_pdata);
+
+        platform_device_register(&pcm970_sja1000);
 }
 
 static void __init pcm037_timer_init(void)
@@ -444,8 +622,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &pcm037_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
new file mode 100644
index 000000000000..d6929721a5fd
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+        PCM037_PCM970,
+        PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
new file mode 100644
index 000000000000..fe52fb1bb8b7
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+        /* SPI #1 */
+        MX31_PIN_CSPI1_MISO__MISO,
+        MX31_PIN_CSPI1_MOSI__MOSI,
+        MX31_PIN_CSPI1_SCLK__SCLK,
+        MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+        MX31_PIN_CSPI1_SS0__SS0,
+        MX31_PIN_CSPI1_SS1__SS1,
+        MX31_PIN_CSPI1_SS2__SS2,
+
+        /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+        IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+        /* GPIO keys */
+        IOMUX_MODE(MX31_PIN_GPIO1_0,    IOMUX_CONFIG_GPIO), /* 0 */
+        IOMUX_MODE(MX31_PIN_GPIO1_1,    IOMUX_CONFIG_GPIO), /* 1 */
+        IOMUX_MODE(MX31_PIN_GPIO1_2,    IOMUX_CONFIG_GPIO), /* 2 */
+        IOMUX_MODE(MX31_PIN_GPIO1_3,    IOMUX_CONFIG_GPIO), /* 3 */
+        IOMUX_MODE(MX31_PIN_SVEN0,      IOMUX_CONFIG_GPIO), /* 32 */
+        IOMUX_MODE(MX31_PIN_STX0,       IOMUX_CONFIG_GPIO), /* 33 */
+        IOMUX_MODE(MX31_PIN_SRX0,       IOMUX_CONFIG_GPIO), /* 34 */
+        IOMUX_MODE(MX31_PIN_SIMPD0,     IOMUX_CONFIG_GPIO), /* 35 */
+        IOMUX_MODE(MX31_PIN_RTS1,       IOMUX_CONFIG_GPIO), /* 38 */
+        IOMUX_MODE(MX31_PIN_CTS1,       IOMUX_CONFIG_GPIO), /* 39 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW4,   IOMUX_CONFIG_GPIO), /* 50 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW5,   IOMUX_CONFIG_GPIO), /* 51 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW6,   IOMUX_CONFIG_GPIO), /* 52 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW7,   IOMUX_CONFIG_GPIO), /* 53 */
+
+        /* LEDs */
+        IOMUX_MODE(MX31_PIN_DTR_DTE1,   IOMUX_CONFIG_GPIO), /* 44 */
+        IOMUX_MODE(MX31_PIN_DSR_DTE1,   IOMUX_CONFIG_GPIO), /* 45 */
+        IOMUX_MODE(MX31_PIN_KEY_COL5,   IOMUX_CONFIG_GPIO), /* 55 */
+        IOMUX_MODE(MX31_PIN_KEY_COL6,   IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+        {
+                .modalias       = "dac124s085",
+                .max_speed_hz   = 400000,
+                .bus_num        = 0,
+                .chip_select    = 0,            /* Index in pcm037_spi1_cs[] */
+                .mode           = SPI_CPHA,
+        },
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+        .chipselect = pcm037_spi1_cs,
+        .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+        {
+                .type   = EV_KEY,
+                .code   = KEY_L,
+                .gpio   = 0,
+                .desc   = "Wheel Manual",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_A,
+                .gpio   = 1,
+                .desc   = "Wheel AF",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_V,
+                .gpio   = 2,
+                .desc   = "Wheel View",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_M,
+                .gpio   = 3,
+                .desc   = "Wheel Menu",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_UP,
+                .gpio   = 32,
+                .desc   = "Nav Pad Up",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_RIGHT,
+                .gpio   = 33,
+                .desc   = "Nav Pad Right",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_DOWN,
+                .gpio   = 34,
+                .desc   = "Nav Pad Down",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_LEFT,
+                .gpio   = 35,
+                .desc   = "Nav Pad Left",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_ENTER,
+                .gpio   = 38,
+                .desc   = "Nav Pad Ok",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_O,
+                .gpio   = 39,
+                .desc   = "Wheel Off",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_FORWARD,
+                .gpio   = 50,
+                .desc   = "Focus Forward",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_BACK,
+                .gpio   = 51,
+                .desc   = "Focus Backward",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_MIDDLE,
+                .gpio   = 52,
+                .desc   = "Release Half",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_EXTRA,
+                .gpio   = 53,
+                .desc   = "Release Full",
+                .wakeup = 0,
+        },
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+        .buttons        = pcm037_gpio_keys,
+        .nbuttons       = ARRAY_SIZE(pcm037_gpio_keys),
+        .rep            = 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &pcm037_gpio_keys_platform_data,
+        },
+};
+
+static int eet_init_devices(void)
+{
+        if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+                return 0;
+
+        mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+                                ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+        /* SPI */
+        spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+        mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+        platform_device_register(&pcm037_gpio_keys_device);
+
+        return 0;
+}
+
+late_initcall(eet_init_devices);
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf2..e18a224671fa 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
                 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
                 .platform_data = &board_eeprom,
         }, {
-                I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-                .type = "pcf8563",
+                I2C_BOARD_INFO("pcf8563", 0x51),
         }
 };
 #endif
@@ -203,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
         MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
         MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
         MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-        MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+        /* gpio */
+        MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
 /*
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx35_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx35_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &pcm043_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11f..044511f1b9a9 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
 }
 
 static struct resource dnet_resources[] = {
-        [0] = {
+        {
                 .name   = "dnet-memory",
                 .start  = QONG_DNET_BASEADDR,
                 .end    = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
                 .flags  = IORESOURCE_MEM,
-        },
-        [1] = {
+        }, {
                 .start  = QONG_FPGA_IRQ,
                 .end    = QONG_FPGA_IRQ,
                 .flags  = IORESOURCE_IRQ,
@@ -280,7 +279,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
         .boot_params    = PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
-        .init_irq       = mxc_init_irq,
+        .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
         .timer          = &qong_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 000000000000..8e5fa38ebb67
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+        bool "Support Motorola Zn5 GSM phone"
+        default n
+        help
+          Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 000000000000..011d5e197125
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y   := mm.o clock.o devices.o system.o iomux.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 000000000000..9939a19d99a1
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x90008000
+params_phys-y   := 0x90000100
+initrd_phys-y   := 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 000000000000..ecfa37fef8ad
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+        crm_small_divider(base, \
+                          base ## _ ## name ## _OFFSET, \
+                          base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+        crm_divider(base, \
+                    base ## _ ## name ## _OFFSET, \
+                    base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+        crm_divider(base, \
+                    base ## _ ## name ## _OFFSET, \
+                    base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+        static const u32 crm_small_dividers[] = {
+                2, 3, 4, 5, 6, 8, 10, 12
+        };
+        u8 idx;
+
+        idx = (__raw_readl(reg) & mask) >> offset;
+        if (idx > 7)
+                return 1;
+
+        return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+        u32 div;
+        div = (__raw_readl(reg) & mask) >> offset;
+        return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= 1 << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(1 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= 0x7 << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(0x7 << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+        return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+        .get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+        return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+        return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+        .get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+        switch (sel) {
+        case 0:
+                return &mcu_pll_clk;
+        case 1:
+                return &dsp_pll_clk;
+        case 2:
+                return &usb_pll_clk;
+        }
+        BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+        if (clk == &mcu_pll_clk)
+                return MXC_PLL0_BASE;
+        else if (clk == &dsp_pll_clk)
+                return MXC_PLL1_BASE;
+        else if (clk == &usb_pll_clk)
+                return MXC_PLL2_BASE;
+        BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+        const void __iomem *pllbase;
+        unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+        long mfn, mfn_abs, mfd, pdf;
+        s64 temp;
+        pllbase = pll_base(clk);
+
+        pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+        if (pll_hfsm == 0) {
+                dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+                dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+                dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+        } else {
+                dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+                dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+                dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+        }
+
+        pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+        mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+        mfi = (mfi <= 5) ? 5 : mfi;
+        mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+        mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+        mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+        if (mfn < 0)
+                mfn_abs = -mfn;
+        else
+                mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+        ref_clk = clk_get_rate(&ckih_clk);
+
+        ref_clk *= 2;
+        ref_clk /= pdf + 1;
+
+        temp = (u64) ref_clk * mfn_abs;
+        do_div(temp, mfd);
+        if (mfn < 0)
+                temp = -temp;
+        temp += ref_clk * mfi;
+
+        return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+        void __iomem *ctl;
+        u32 reg;
+
+        ctl = pll_base(clk);
+        reg = __raw_readl(ctl);
+        reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+        __raw_writel(reg, ctl);
+        do {
+                reg = __raw_readl(ctl);
+        } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+        return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+        void __iomem *ctl;
+        u32 reg;
+
+        ctl = pll_base(clk);
+        reg = __raw_readl(ctl);
+        reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+        __raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_pll_get_rate,
+        .enable = clk_pll_enable,
+        .disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_pll_get_rate,
+        .enable = clk_pll_enable,
+        .disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_pll_get_rate,
+        .enable = clk_pll_enable,
+        .disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+        u32 ascsr, acsr;
+        u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+        ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+        acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+        /* 0 for ckih, 1 for ckih*2 */
+        ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+        /* reg divider */
+        ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+        /* undocumented, 1 for disabling divider */
+        ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+        /* 0 for pat_ref, 1 for divider out */
+        acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+        if (acs & !ads)
+                /* use divided clock */
+                return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+        return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+        u32 acsr, ascsr;
+
+        acsr = __raw_readl(MXC_CRMAP_ACSR);
+        ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+        if (acsr & MXC_CRMAP_ACSR_ACS) {
+                u8 sel;
+                sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+                        MXC_CRMAP_ASCSR_APSEL_OFFSET;
+                return clk_get_rate(pll_clk(sel)) /
+                        CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+        }
+        return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+        .get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+        u32 acsr, ascsr;
+
+        acsr = __raw_readl(MXC_CRMAP_ACSR);
+        ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+        if (acsr & MXC_CRMAP_ACSR_ACS) {
+                u8 sel;
+                sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+                        MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+                return pll_clk(sel);
+        }
+        return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) /
+                CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+        .enable_reg = MXC_CRMAP_ACDER2,
+        .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+        .get_rate = clk_usb_get_rate,
+        .enable = _clk_1bit_enable,
+        .disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) /
+                CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+        .parent = &ap_pre_dfs_clk,
+        .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+        .parent = &ap_pre_dfs_clk,
+        .get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+        u32 acder2;
+
+        acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+        if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+                return 2 * clk_get_rate(clk->parent);
+
+        return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+        .parent = &ckih_clk,
+        .get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+        u32 div;
+
+        switch (clk->id) {
+        case 0:
+        case 1:
+                div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+                break;
+        case 2:
+                div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+                break;
+        default:
+                BUG();
+        }
+        return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+        {
+                .id = 0,
+                .parent = &perclk_clk,
+                .enable_reg = MXC_CRMAP_APRA,
+                .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+                .get_rate = clk_uart_get_rate,
+                .enable = _clk_1bit_enable,
+                .disable = _clk_1bit_disable,
+        }, {
+                .id = 1,
+                .parent = &perclk_clk,
+                .enable_reg = MXC_CRMAP_APRA,
+                .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+                .get_rate = clk_uart_get_rate,
+                .enable = _clk_1bit_enable,
+                .disable = _clk_1bit_disable,
+        }, {
+                .id = 2,
+                .parent = &perclk_clk,
+                .enable_reg = MXC_CRMAP_APRA,
+                .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+                .get_rate = clk_uart_get_rate,
+                .enable = _clk_1bit_enable,
+                .disable = _clk_1bit_disable,
+        },
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+        return clk_get_rate(clk->parent) /
+                CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+        .parent = &ahb_clk,
+        .enable_reg = MXC_CRMAP_ACDER2,
+        .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+        .get_rate = clk_nfc_get_rate,
+        .enable = _clk_1bit_enable,
+        .disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+        u32 aprb;
+        u8 sel;
+        u32 mask;
+        int offset;
+
+        aprb = __raw_readl(MXC_CRMAP_APRB);
+
+        switch (clk->id) {
+        case 0:
+                mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+                offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+                break;
+        case 1:
+                mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+                offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+                break;
+        default:
+                BUG();
+        }
+        sel = (aprb & mask) >> offset;
+
+        switch (sel) {
+        case 0:
+                return &ckih_clk;
+        case 1:
+                return &ckih_x2_clk;
+        }
+        return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+        u32 div;
+
+        switch (clk->id) {
+        case 0:
+                div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+                break;
+        case 1:
+                div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+                break;
+        default:
+                BUG();
+        }
+
+        return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+        u32 amlpmre1, aprb;
+
+        amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+        aprb = __raw_readl(MXC_CRMAP_APRB);
+        switch (clk->id) {
+        case 0:
+                amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+                aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+                break;
+        case 1:
+                amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+                aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+                break;
+        }
+        __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+        __raw_writel(aprb, MXC_CRMAP_APRB);
+        return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+        u32 amlpmre1, aprb;
+
+        amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+        aprb = __raw_readl(MXC_CRMAP_APRB);
+        switch (clk->id) {
+        case 0:
+                amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+                aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+                break;
+        case 1:
+                amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+                aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+                break;
+        }
+        __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+        __raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+        {
+                .id = 0,
+                .get_rate = clk_sdhc_get_rate,
+                .enable = clk_sdhc_enable,
+                .disable = clk_sdhc_disable,
+        }, {
+                .id = 1,
+                .get_rate = clk_sdhc_get_rate,
+                .enable = clk_sdhc_enable,
+                .disable = clk_sdhc_disable,
+        },
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+        {
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable_reg = MXC_CRMAP_AMLPMRD,
+                .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+                .enable = _clk_3bit_enable,
+                .disable = _clk_3bit_disable,
+        }, {
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable_reg = MXC_CRMAP_AMLPMRD,
+                .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+                .enable = _clk_3bit_enable,
+                .disable = _clk_3bit_disable,
+        },
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+        .parent = &ipg_clk,
+        .enable_reg = MXC_CRMAP_AMLPMRC,
+        .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+        .enable = _clk_3bit_enable,
+        .disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+        {
+                .id = 0,
+                .parent = &ipg_clk,
+                .enable_reg = MXC_CRMAP_AMLPMRE2,
+                .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+                .enable = _clk_3bit_enable,
+                .disable = _clk_3bit_disable,
+        }, {
+                .id = 1,
+                .parent = &ipg_clk,
+                .enable_reg = MXC_CRMAP_AMLPMRE1,
+                .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+                .enable = _clk_3bit_enable,
+                .disable = _clk_3bit_disable,
+        },
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+        { \
+                .dev_id = d, \
+                .con_id = n, \
+                .clk = &c, \
+        },
+
+static struct clk_lookup lookups[] = {
+        _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+        _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+        _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+        _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+        _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+        _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+        _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+        _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+        void __iomem *gpt_base;
+        int i;
+
+        ckih_rate = fref;
+
+        usb_clk.parent = clk_usb_parent(&usb_clk);
+        sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+        sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+
+        gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+        mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+        return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 000000000000..ce4f59058189
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ                   32768
+
+#define MXC_CRM_AP_BASE                 MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE                MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE                    MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE                   MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE                   MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE                   MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE                 MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL                  0x00
+#define MXC_PLL_DP_CONFIG               0x04
+#define MXC_PLL_DP_OP                   0x08
+#define MXC_PLL_DP_MFD                  0x0C
+#define MXC_PLL_DP_MFN                  0x10
+#define MXC_PLL_DP_HFS_OP               0x1C
+#define MXC_PLL_DP_HFS_MFD              0x20
+#define MXC_PLL_DP_HFS_MFN              0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN      0x1000
+#define MXC_PLL_DP_CTL_ADE              0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV      0x400
+#define MXC_PLL_DP_CTL_HFSM             0x80
+#define MXC_PLL_DP_CTL_PRE              0x40
+#define MXC_PLL_DP_CTL_UPEN             0x20
+#define MXC_PLL_DP_CTL_RST              0x10
+#define MXC_PLL_DP_CTL_RCP              0x8
+#define MXC_PLL_DP_CTL_PLM              0x4
+#define MXC_PLL_DP_CTL_BRM0             0x2
+#define MXC_PLL_DP_CTL_LRF              0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET        4
+#define MXC_PLL_DP_OP_MFI_MASK          0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET        0
+#define MXC_PLL_DP_OP_PDF_MASK          0xF
+
+#define MXC_PLL_DP_MFD_OFFSET           0
+#define MXC_PLL_DP_MFD_MASK             0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET           0
+#define MXC_PLL_DP_MFN_MASK             0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR                 (MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR                  (MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1                (MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2                (MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR                 (MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR                (MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA               (MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB               (MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC               (MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD               (MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1              (MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2              (MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF               (MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG               (MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR                 (MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR                  (MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR                  (MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR                   (MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR                  (MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR                  (MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA                 (MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB                 (MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR                  (MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA                  (MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB                  (MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR                  (MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR                 (MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS                     0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET       15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2          0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET           13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK             (0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET           11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK             (0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET          7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK            (0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET          5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK            (0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET            3
+#define MXC_CRMAP_ASCSR_APSEL_MASK              (0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET       2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1          0x4
+#define MXC_CRMAP_ASCSR_APISEL                  0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET            8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK              (0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET            4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK              (0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET             0
+#define MXC_CRMAP_ACDR_IPDIV_MASK               0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET           30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET          24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK            (0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET          14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET         8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK           (0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET          6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET         0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK           0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET    24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK      (0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET           20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET          16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK            (0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET           12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET          8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK            (0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET       5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK         (0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET         0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK           0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET         22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK           (0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET         19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK           (0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET         12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK           (0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET         9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK           (0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET         6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK           (0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET         3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK           (0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET         0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK           0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET         28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK           (0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET         22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK           (0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET         16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK           (0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET         12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK           (0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET         9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK           (0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET         6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK           (0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET         3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK           (0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET         0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK           0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET         22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK           (0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET         12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK           (0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET         9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK           (0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET         6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK           (0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET         0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK           0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET        28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK          (0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET        25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK          (0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET        22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK          (0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET        19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK          (0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET        16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK          (0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET        12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK          (0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET        9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK          (0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET        6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK          (0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET        3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK          (0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET        0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK          0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET        0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK          0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET         19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK           (0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET         16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK           (0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET         9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK           (0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET         6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK           (0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET         3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK           (0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET         0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK           (0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET         28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK           (0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET         22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK           (0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET         19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK           (0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET         16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK           (0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET         12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK           (0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET         9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK           (0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET         6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK           (0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET         3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK           (0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET         0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK           0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET            20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK              (0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET            29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET             24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET          17
+#define MXC_CRMAP_APRA_UART3DIV_MASK            (0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET           16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET           13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET           8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET           0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET        13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK          (0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET         9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK           (0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET           8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET        5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK          (0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET         1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK           (0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET           0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET               8
+#define MXC_CRMAP_ACSR_ADS                      (0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS                      0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0                   (0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2                   (0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4                   (0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8                   (0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET              8
+#define MXC_CRMAP_ADCR_LFDF_MASK                (0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL                  0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN                0x20
+#define MXC_CRMAP_ADCR_DIV_BYP                  0x2
+#define MXC_CRMAP_ADCR_VSTAT                    0x8
+#define MXC_CRMAP_ADCR_TSTAT                    0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL               0x10
+#define MXC_CRMAP_ADCR_CLK_ON                   0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET               16
+#define MXC_CRMAP_ADFMR_FC_MASK                 (0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET               1
+#define MXC_CRMAP_ADFMR_MF_MASK                 (0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY           0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN            0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH                (1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH                 (1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK                (0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD                     (1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK              (0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET            8
+#define MXC_CRMAP_ACR_CKOD                      (1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK                 (0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP                    (1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT          0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP               0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN                0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT          0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP               0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN                0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT          0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP               0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN                0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT          0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP               0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN                0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT          0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP               0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN                0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT          0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP               0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN                0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED           0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT          0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP               0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN                0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED           0x00000000
+
+#define NUM_GATE_CTRL                           6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR                         (MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR                         (MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1                    0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL                 (1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL                  (1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET           8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK             (0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET           0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK             0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME                      (MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0                        (MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1                        (MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN                           (MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER                        (MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER                        (MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER                           (MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL                     (MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP               0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL             0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1                  0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0                  0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE         0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE         0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE          0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN         0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN                0x00000001
+#define MXC_DSM_CONTROL0_RESTART                0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST                 0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST                 0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32                  0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN           0x00000800
+#define MXC_DSM_CONTROL1_SLEEP                  0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE         0x00004000
+#define MXC_DSM_CTREN_CNT32                     0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX                   0x80000000
+#define MXC_DSM_MGPER_PER_MASK                  0x000003FF
+#define MXC_DSM_MGPER_PER(n)                    (MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL      (MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER       (MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER       (MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 000000000000..353bd977b393
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+        {
+                .start = MXC91231_UART1_BASE_ADDR,
+                .end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_UART1_RX,
+                .end = MXC91231_INT_UART1_RX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART1_TX,
+                .end = MXC91231_INT_UART1_TX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART1_MINT,
+                .end = MXC91231_INT_UART1_MINT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device0 = {
+        .name = "imx-uart",
+        .id = 0,
+        .resource = uart0,
+        .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+        {
+                .start = MXC91231_UART2_BASE_ADDR,
+                .end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_UART2_RX,
+                .end = MXC91231_INT_UART2_RX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART2_TX,
+                .end = MXC91231_INT_UART2_TX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART2_MINT,
+                .end = MXC91231_INT_UART2_MINT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device1 = {
+        .name = "imx-uart",
+        .id = 1,
+        .resource = uart1,
+        .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+        {
+                .start = MXC91231_UART3_BASE_ADDR,
+                .end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_UART3_RX,
+                .end = MXC91231_INT_UART3_RX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART3_TX,
+                .end = MXC91231_INT_UART3_TX,
+                .flags = IORESOURCE_IRQ,
+        }, {
+                .start = MXC91231_INT_UART3_MINT,
+                .end = MXC91231_INT_UART3_MINT,
+                .flags = IORESOURCE_IRQ,
+
+        },
+};
+
+struct platform_device mxc_uart_device2 = {
+        .name = "imx-uart",
+        .id = 2,
+        .resource = uart2,
+        .num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+        [0] = {
+                .chip.label = "gpio-0",
+                .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+                .irq = MXC91231_INT_GPIO1,
+                .virtual_irq_start = MXC_GPIO_IRQ_START,
+        },
+        [1] = {
+                .chip.label = "gpio-1",
+                .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+                .irq = MXC91231_INT_GPIO2,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+        },
+        [2] = {
+                .chip.label = "gpio-2",
+                .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+                .irq = MXC91231_INT_GPIO3,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+        },
+        [3] = {
+                .chip.label = "gpio-3",
+                .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+                .irq = MXC91231_INT_GPIO4,
+                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+        },
+};
+
+int __init mxc_register_gpios(void)
+{
+        return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+        {
+                .start  = MXC91231_NFC_BASE_ADDR,
+                .end    = MXC91231_NFC_BASE_ADDR + 0xfff,
+                .flags  = IORESOURCE_MEM
+        }, {
+                .start  = MXC91231_INT_NANDFC,
+                .end    = MXC91231_INT_NANDFC,
+                .flags  = IORESOURCE_IRQ
+        },
+};
+
+struct platform_device mxc_nand_device = {
+        .name = "mxc_nand",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_nand_resources),
+        .resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+        {
+                .start = MXC91231_MMC_SDHC1_BASE_ADDR,
+                .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_MMC_SDHC1,
+                .end = MXC91231_INT_MMC_SDHC1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+        {
+                .start = MXC91231_MMC_SDHC2_BASE_ADDR,
+                .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_MMC_SDHC2,
+                .end = MXC91231_INT_MMC_SDHC2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_sdhc_device0 = {
+        .name = "mxc-mmc",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+        .resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+        .name = "mxc-mmc",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+        .resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+        {
+                .start = MXC91231_CSPI1_BASE_ADDR,
+                .end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_CSPI1,
+                .end = MXC91231_INT_CSPI1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_cspi_device0 = {
+        .name = "spi_imx",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+        .resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+        {
+                .start = MXC91231_CSPI2_BASE_ADDR,
+                .end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MXC91231_INT_CSPI2,
+                .end = MXC91231_INT_CSPI2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_cspi_device1 = {
+        .name = "spi_imx",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+        .resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+        {
+                .start = MXC91231_WDOG1_BASE_ADDR,
+                .end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device mxc_wdog_device0 = {
+        .name = "mxc-wdt",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+        .resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 000000000000..72a2136ce27d
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 000000000000..405d9b19d891
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE           MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE          MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL      (IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL      (IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL         (IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1           (IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2           (IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS                        ((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+        (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \
+         ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +            \
+         ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+        u32 side, field, l, mode, ret = 0;
+        void __iomem *reg;
+
+        side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+        switch (side) {
+        case MUX_SIDE_AP:
+                reg = IOMUXSW_AP_MUX_CTL;
+                break;
+        case MUX_SIDE_SP:
+                reg = IOMUXSW_SP_MUX_CTL;
+                break;
+        default:
+                return -EINVAL;
+        }
+        reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+        field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+        mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+        spin_lock(&gpio_mux_lock);
+
+        l = __raw_readl(reg);
+        l &= ~(0xff << (field * 8));
+        l |= mode << (field * 8);
+        __raw_writel(l, reg);
+
+        spin_unlock(&gpio_mux_lock);
+
+        return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+        u32 padgrp, field, l;
+        void __iomem *reg;
+
+        padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+        reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+        field = (pin + 2) % 3;
+
+        pr_debug("%s: reg offset = 0x%x, field = %d\n",
+                        __func__, (pin + 2) / 3, field);
+
+        spin_lock(&gpio_mux_lock);
+
+        l = __raw_readl(reg);
+        l &= ~(0x1ff << (field * 10));
+        l |= config << (field * 10);
+        __raw_writel(l, reg);
+
+        spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ *      - reserves the pin so that it is not claimed by another driver
+ *      - setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+        unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+        if (pad >= (PIN_MAX + 1)) {
+                printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+                        pad, label ? label : "?");
+                return -EINVAL;
+        }
+
+        if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+                printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+                        pad, label ? label : "?");
+                return -EBUSY;
+        }
+        mxc_iomux_mode(pin_mode);
+
+        return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+                const char *label)
+{
+        unsigned int *p = pin_list;
+        int i;
+        int ret = -EINVAL;
+
+        for (i = 0; i < count; i++) {
+                ret = mxc_iomux_alloc_pin(*p, label);
+                if (ret)
+                        goto setup_error;
+                p++;
+        }
+        return 0;
+
+setup_error:
+        mxc_iomux_release_multiple_pins(pin_list, i);
+        return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+        unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+        if (pad < (PIN_MAX + 1))
+                clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+        unsigned int *p = pin_list;
+        int i;
+
+        for (i = 0; i < count; i++) {
+                mxc_iomux_release_pin(*p);
+                p++;
+        }
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 000000000000..7dbe4ca12efd
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+        pm_power_off = mxc91231_power_off;
+
+        mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+        mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
+        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+        mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+        mxc_register_device(&mxc_wdog_device0, NULL);
+
+        return;
+}
+
+static void __init zn5_timer_init(void)
+{
+        mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+        .init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+        .phys_io        = MXC91231_AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = PHYS_OFFSET + 0x100,
+        .map_io         = mxc91231_map_io,
+        .init_irq       = mxc91231_init_irq,
+        .timer          = &zn5_timer,
+        .init_machine   = zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 000000000000..6becda3ff331
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MXC specific definitions
+ *  Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+        {
+                .virtual        = MXC91231_L2CC_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+                .length         = MXC91231_L2CC_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_X_MEMC_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+                .length         = MXC91231_X_MEMC_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_ROMP_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+                .length         = MXC91231_ROMP_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_AVIC_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+                .length         = MXC91231_AVIC_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_AIPS1_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+                .length         = MXC91231_AIPS1_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_SPBA0_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+                .length         = MXC91231_SPBA0_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_SPBA1_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+                .length         = MXC91231_SPBA1_SIZE,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = MXC91231_AIPS2_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+                .length         = MXC91231_AIPS2_SIZE,
+                .type           = MT_DEVICE,
+        },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+        mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+        mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 000000000000..736f7efd874a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR                MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE     (1 << 6)
+#define WDOG_WCR_ASSERT         (1 << 5)
+
+void mxc91231_power_off(void)
+{
+        u16 wcr;
+
+        wcr = __raw_readw(WDOG_WCR);
+        wcr |= WDOG_WCR_OUT_ENABLE;
+        wcr &= ~WDOG_WCR_ASSERT;
+        __raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+        u32 amcr;
+
+        /* Reset the AP using CRM */
+        amcr = __raw_readl(MXC_CRMAP_AMCR);
+        amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+        __raw_writel(amcr, MXC_CRMAP_AMCR);
+
+        mdelay(10);
+        cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+        u32 crm_ctl;
+
+        /* Go to WAIT mode after WFI */
+        crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+        crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+        crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+        __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda6..844f1f9acbdf 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
                 .endm
 
                 .macro  get_irqnr_preamble, base, tmp
+                ldr     \base, =io_p2v(0x001ff000)
                 .endm
 
                 .macro  arch_ret_to_user, tmp1, tmp2
                 .endm
 
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-                mov     \base, #io_p2v(0x00100000)
-                add     \base, \base, #0x000ff000
-
                 ldr     \irqstat, [\base, #0]
                 clz     \irqnr, \irqstat
                 rsb     \irqnr, \irqnr, #31
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 000000000000..2a02b49c40f0
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+        bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+        select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+        bool
+
+
+config I2C_BITBANG_8815NHK
+        tristate "Driver for bit-bang busses found on the 8815 NHK"
+        depends on I2C && MACH_NOMADIK_8815NHK
+        select I2C_ALGOBIT
+        default y
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 000000000000..412040982a40
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y                   += clock.o timer.o gpio.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y   := 0x00008000
+params_phys-y   := 0x00000100
+initrd_phys-y   := 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 000000000000..79bdea943eb4
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ *  Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ *  NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+        .dev = { .init_name = "uart0" },
+        __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+        .irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+        .dev = { .init_name = "uart1" },
+        __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+        .irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+        &uart0_device,
+        &uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+        .rate = 48*1000*1000,
+};
+
+static struct resource nhk8815_eth_resources[] = {
+        {
+                .name = "smc91x-regs",
+                .start = 0x34000000 + 0x300,
+                .end = 0x34000000 + SZ_64K - 1,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = NOMADIK_GPIO_TO_IRQ(115),
+                .end = NOMADIK_GPIO_TO_IRQ(115),
+                .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+        }
+};
+
+static struct platform_device nhk8815_eth_device = {
+        .name = "smc91x",
+        .resource = nhk8815_eth_resources,
+        .num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+        int gpio_nr = 115; /* hardwired in the board */
+        int err;
+
+        err = gpio_request(gpio_nr, "eth_irq");
+        if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+        if (!err) err = gpio_direction_input(gpio_nr);
+        if (err)
+                pr_err("Error %i in %s\n", err, __func__);
+        return err;
+}
+device_initcall(nhk8815_eth_init);
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+        &nhk8815_eth_device,
+        /* will add more devices */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+        int i;
+
+        cpu8815_platform_init();
+        platform_add_devices(nhk8815_platform_devices,
+                             ARRAY_SIZE(nhk8815_platform_devices));
+
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+                nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+                amba_device_register(amba_devs[i], &iomem_resource);
+        }
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+        /* Maintainer: ST MicroElectronics */
+        .phys_io        = NOMADIK_UART0_BASE,
+        .io_pg_offst    = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x100,
+        .map_io         = cpu8815_map_io,
+        .init_irq       = cpu8815_init_irq,
+        .timer          = &nomadik_timer,
+        .init_machine   = nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 000000000000..9f92502a0083
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-nomadik/clock.c
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+        struct clk_lookup *clkdev;
+
+        clkdev = clkdev_alloc(clk, NULL, dev_id);
+        if (!clkdev)
+                return -ENOMEM;
+        clkdev_add(clkdev);
+        return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 000000000000..235faec7f627
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ *  linux/arch/arm/mach-nomadik/clock.h
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+        unsigned long           rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 000000000000..f93c59634191
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+        {
+                .name = "GPIO-0-31",
+                .first_gpio = 0,
+                .first_irq = NOMADIK_GPIO_TO_IRQ(0),
+                .parent_irq = IRQ_GPIO0,
+        }, {
+                .name = "GPIO-32-63",
+                .first_gpio = 32,
+                .first_irq = NOMADIK_GPIO_TO_IRQ(32),
+                .parent_irq = IRQ_GPIO1,
+        }, {
+                .name = "GPIO-64-95",
+                .first_gpio = 64,
+                .first_irq = NOMADIK_GPIO_TO_IRQ(64),
+                .parent_irq = IRQ_GPIO2,
+        }, {
+                .name = "GPIO-96-127", /* 124..127 not routed to pin */
+                .first_gpio = 96,
+                .first_irq = NOMADIK_GPIO_TO_IRQ(96),
+                .parent_irq = IRQ_GPIO3,
+        }
+};
+
+#define __MEM_4K_RESOURCE(x) \
+        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+        {
+                .dev = {
+                        .init_name = "gpio0",
+                        .platform_data = cpu8815_gpio + 0,
+                },
+                __MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+        }, {
+                .dev = {
+                        .init_name = "gpio1",
+                        .platform_data = cpu8815_gpio + 1,
+                },
+                __MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+        }, {
+                .dev = {
+                        .init_name = "gpio2",
+                        .platform_data = cpu8815_gpio + 2,
+                },
+                __MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+        }, {
+                .dev = {
+                        .init_name = "gpio3",
+                        .platform_data = cpu8815_gpio + 3,
+                },
+                __MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+        },
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+        cpu8815_amba_gpio + 0,
+        cpu8815_amba_gpio + 1,
+        cpu8815_amba_gpio + 2,
+        cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+                amba_device_register(amba_devs[i], &iomem_resource);
+        return 0;
+}
+arch_initcall(cpu8815_init);
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+        {
+                .virtual =      NOMADIK_IO_VIRTUAL,
+                .pfn =          __phys_to_pfn(NOMADIK_IO_PHYSICAL),
+                .length =       NOMADIK_IO_SIZE,
+                .type =         MT_DEVICE,
+        }
+        /* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+        iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+        /* This modified VIC cell has two register blocks, at 0 and 0x20 */
+        vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
+        vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ */
+ void __init cpu8815_platform_init(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+        /* At full speed latency must be >=2, so 0x249 in low bits */
+        l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
+         return;
+}
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 000000000000..9a09b2791e03
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+        struct gpio_chip chip;
+        void __iomem *addr;
+        unsigned int parent_irq;
+        spinlock_t *lock;
+        /* Keep track of configured edges */
+        u32 edge_rising;
+        u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+        struct nmk_gpio_chip *nmk_chip;
+        unsigned long flags;
+        u32 afunc, bfunc, bit;
+
+        nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+        if (!nmk_chip)
+                return -EINVAL;
+
+        bit = 1 << (gpio - nmk_chip->chip.base);
+
+        spin_lock_irqsave(&nmk_chip->lock, flags);
+        afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+        bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+        if (gpio_mode & NMK_GPIO_ALT_A)
+                afunc |= bit;
+        if (gpio_mode & NMK_GPIO_ALT_B)
+                bfunc |= bit;
+        writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+        writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+        return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+        struct nmk_gpio_chip *nmk_chip;
+        u32 afunc, bfunc, bit;
+
+        nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+        if (!nmk_chip)
+                return -EINVAL;
+
+        bit = 1 << (gpio - nmk_chip->chip.base);
+
+        afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+        bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+        return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+        return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+        int gpio;
+        struct nmk_gpio_chip *nmk_chip;
+
+        gpio = NOMADIK_IRQ_TO_GPIO(irq);
+        nmk_chip = get_irq_chip_data(irq);
+        if (!nmk_chip)
+                return;
+        writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+        int gpio;
+        struct nmk_gpio_chip *nmk_chip;
+        unsigned long flags;
+        u32 bitmask, reg;
+
+        gpio = NOMADIK_IRQ_TO_GPIO(irq);
+        nmk_chip = get_irq_chip_data(irq);
+        bitmask = nmk_gpio_get_bitmask(gpio);
+        if (!nmk_chip)
+                return;
+
+        /* we must individually clear the two edges */
+        spin_lock_irqsave(&nmk_chip->lock, flags);
+        if (nmk_chip->edge_rising & bitmask) {
+                reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+                reg &= ~bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+        }
+        if (nmk_chip->edge_falling & bitmask) {
+                reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+                reg &= ~bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+        }
+        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+        int gpio;
+        struct nmk_gpio_chip *nmk_chip;
+        unsigned long flags;
+        u32 bitmask, reg;
+
+        gpio = NOMADIK_IRQ_TO_GPIO(irq);
+        nmk_chip = get_irq_chip_data(irq);
+        bitmask = nmk_gpio_get_bitmask(gpio);
+        if (!nmk_chip)
+                return;
+
+        /* we must individually set the two edges */
+        spin_lock_irqsave(&nmk_chip->lock, flags);
+        if (nmk_chip->edge_rising & bitmask) {
+                reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+                reg |= bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+        }
+        if (nmk_chip->edge_falling & bitmask) {
+                reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+                reg |= bitmask;
+                writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+        }
+        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+        int gpio;
+        struct nmk_gpio_chip *nmk_chip;
+        unsigned long flags;
+        u32 bitmask;
+
+        gpio = NOMADIK_IRQ_TO_GPIO(irq);
+        nmk_chip = get_irq_chip_data(irq);
+        bitmask = nmk_gpio_get_bitmask(gpio);
+        if (!nmk_chip)
+                return -EINVAL;
+
+        if (type & IRQ_TYPE_LEVEL_HIGH)
+                return -EINVAL;
+        if (type & IRQ_TYPE_LEVEL_LOW)
+                return -EINVAL;
+
+        spin_lock_irqsave(&nmk_chip->lock, flags);
+
+        nmk_chip->edge_rising &= ~bitmask;
+        if (type & IRQ_TYPE_EDGE_RISING)
+                nmk_chip->edge_rising |= bitmask;
+        writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+        nmk_chip->edge_falling &= ~bitmask;
+        if (type & IRQ_TYPE_EDGE_FALLING)
+                nmk_chip->edge_falling |= bitmask;
+        writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+        spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+        nmk_gpio_irq_unmask(irq);
+
+        return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+        .name           = "Nomadik-GPIO",
+        .ack            = nmk_gpio_irq_ack,
+        .mask           = nmk_gpio_irq_mask,
+        .unmask         = nmk_gpio_irq_unmask,
+        .set_type       = nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+        struct nmk_gpio_chip *nmk_chip;
+        struct irq_chip *host_chip;
+        unsigned int gpio_irq;
+        u32 pending;
+        unsigned int first_irq;
+
+        nmk_chip = get_irq_data(irq);
+        first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+        while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+                gpio_irq = first_irq + __ffs(pending);
+                generic_handle_irq(gpio_irq);
+        }
+        if (0) {/* don't ack parent irq, as ack == disable */
+                host_chip = get_irq_chip(irq);
+                host_chip->ack(irq);
+        }
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+        unsigned int first_irq;
+        int i;
+
+        first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+        for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+                set_irq_chip(i, &nmk_gpio_irq_chip);
+                set_irq_handler(i, handle_edge_irq);
+                set_irq_flags(i, IRQF_VALID);
+                set_irq_chip_data(i, nmk_chip);
+        }
+        set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+        set_irq_data(nmk_chip->parent_irq, nmk_chip);
+        return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct nmk_gpio_chip *nmk_chip =
+                container_of(chip, struct nmk_gpio_chip, chip);
+
+        writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+        return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+                                int val)
+{
+        struct nmk_gpio_chip *nmk_chip =
+                container_of(chip, struct nmk_gpio_chip, chip);
+
+        writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+        return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+        struct nmk_gpio_chip *nmk_chip =
+                container_of(chip, struct nmk_gpio_chip, chip);
+        u32 bit = 1 << offset;
+
+        return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+                                int val)
+{
+        struct nmk_gpio_chip *nmk_chip =
+                container_of(chip, struct nmk_gpio_chip, chip);
+        u32 bit = 1 << offset;
+
+        if (val)
+                writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+        else
+                writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+        .direction_input        = nmk_gpio_make_input,
+        .get                    = nmk_gpio_get_input,
+        .direction_output       = nmk_gpio_make_output,
+        .set                    = nmk_gpio_set_output,
+        .ngpio                  = NMK_GPIO_PER_CHIP,
+        .can_sleep              = 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+        struct nmk_gpio_platform_data *pdata;
+        struct nmk_gpio_chip *nmk_chip;
+        struct gpio_chip *chip;
+        int ret;
+
+        pdata = dev->dev.platform_data;
+        ret = amba_request_regions(dev, pdata->name);
+        if (ret)
+                return ret;
+
+        nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+        if (!nmk_chip) {
+                ret = -ENOMEM;
+                goto out_amba;
+        }
+        /*
+         * The virt address in nmk_chip->addr is in the nomadik register space,
+         * so we can simply convert the resource address, without remapping
+         */
+        nmk_chip->addr = io_p2v(dev->res.start);
+        nmk_chip->chip = nmk_gpio_template;
+        nmk_chip->parent_irq = pdata->parent_irq;
+
+        chip = &nmk_chip->chip;
+        chip->base = pdata->first_gpio;
+        chip->label = pdata->name;
+        chip->dev = &dev->dev;
+        chip->owner = THIS_MODULE;
+
+        ret = gpiochip_add(&nmk_chip->chip);
+        if (ret)
+                goto out_free;
+
+        amba_set_drvdata(dev, nmk_chip);
+
+        nmk_gpio_init_irq(nmk_chip);
+
+        dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+                 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+        return 0;
+
+ out_free:
+        kfree(nmk_chip);
+ out_amba:
+        amba_release_regions(dev);
+        dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+                  pdata->first_gpio, pdata->first_gpio+31);
+        return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+        struct nmk_gpio_chip *nmk_chip;
+
+        nmk_chip = amba_get_drvdata(dev);
+        gpiochip_remove(&nmk_chip->chip);
+        kfree(nmk_chip);
+        amba_release_regions(dev);
+        return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+        {
+                .id     = 0x1f080060,
+                .mask   = 0xffefffff,
+        },
+        {0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+        .drv = {
+                .owner = THIS_MODULE,
+                .name = "gpio",
+                },
+        .probe = nmk_gpio_probe,
+        .remove = nmk_gpio_remove,
+        .suspend = NULL, /* to be done */
+        .resume = NULL,
+        .id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+        return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 000000000000..abfe25a08d6b
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+        /* keep defaults for timeouts; pins are push-pull bidirectional */
+        .scl_pin = 62,
+        .sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+        /* keep defaults for timeouts; pins are push-pull bidirectional */
+        .scl_pin = 53,
+        .sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+        .name   = "i2c-gpio",
+        .id     = 0,
+        .dev    = {
+                .platform_data = &nhk8815_i2c_data0,
+        },
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+        .name   = "i2c-gpio",
+        .id     = 1,
+        .dev    = {
+                .platform_data = &nhk8815_i2c_data1,
+        },
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+        nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+        nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+        platform_device_register(&nhk8815_i2c_dev0);
+
+        nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+        nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+        platform_device_register(&nhk8815_i2c_dev1);
+
+        return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+        platform_device_unregister(&nhk8815_i2c_dev0);
+        platform_device_unregister(&nhk8815_i2c_dev1);
+        return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 000000000000..e876990e1569
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0x10000000        @ physical base address
+                movne   \rx, #0xf0000000        @ virtual base
+                add     \rx, \rx, #0x00100000
+                add     \rx, \rx, #0x000fb000
+                .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 000000000000..49f1aa3bb420
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =IO_ADDRESS(NOMADIK_IC_BASE)
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+        /* This stanza gets the irq mask from one of two status registers */
+        mov     \irqnr, #0
+        ldr     \irqstat, [\base, #VIC_REG_IRQSR0]      @ get masked status
+        cmp     \irqstat, #0
+        bne     1001f
+        add     \irqnr, \irqnr, #32
+        ldr     \irqstat, [\base, #VIC_REG_IRQSR1]      @ get masked status
+
+1001:   tst     \irqstat, #15
+        bne     1002f
+        add     \irqnr, \irqnr, #4
+        movs    \irqstat, \irqstat, lsr #4
+        bne     1001b
+1002:   tst     \irqstat, #1
+        bne     1003f
+        add     \irqnr, \irqnr, #1
+        movs    \irqstat, \irqstat, lsr #1
+        bne     1002b
+1003:   /* EQ will be set if no irqs pending */
+        .endm
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 000000000000..61577c9f9a7d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT    0x00
+#define NMK_GPIO_DATS   0x04
+#define NMK_GPIO_DATC   0x08
+#define NMK_GPIO_PDIS   0x0c
+#define NMK_GPIO_DIR    0x10
+#define NMK_GPIO_DIRS   0x14
+#define NMK_GPIO_DIRC   0x18
+#define NMK_GPIO_SLPC   0x1c
+#define NMK_GPIO_AFSLA  0x20
+#define NMK_GPIO_AFSLB  0x24
+
+#define NMK_GPIO_RIMSC  0x40
+#define NMK_GPIO_FIMSC  0x44
+#define NMK_GPIO_IS     0x48
+#define NMK_GPIO_IC     0x4c
+#define NMK_GPIO_RWIMSC 0x50
+#define NMK_GPIO_FWIMSC 0x54
+#define NMK_GPIO_WKS    0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO       0
+#define NMK_GPIO_ALT_A  1
+#define NMK_GPIO_ALT_B  2
+#define NMK_GPIO_ALT_C  (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+        char *name;
+        int first_gpio;
+        int first_irq;
+        int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 000000000000..6316dba3bfc8
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL      0xF0000000      /* VA of IO  */
+#define NOMADIK_IO_PHYSICAL     0x10000000      /* PA of IO */
+#define NOMADIK_IO_SIZE         0x00300000      /* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+                        - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+                        - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ *   Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE       0x10100000      /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE     0x10110000      /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE      0x10120000      /* CLCD Controller */
+#define NOMADIK_MDIF_BASE       0x10120000      /* MDIF */
+#define NOMADIK_DMA0_BASE       0x10130000      /* DMA0 Controller */
+#define NOMADIK_IC_BASE         0x10140000      /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE       0x10150000      /* DMA1 Controller */
+#define NOMADIK_USB_BASE        0x10170000      /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE       0x10180000      /* Crypto processor */
+#define NOMADIK_SHA1_BASE       0x10190000      /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE        0x101A0000      /* XTI */
+#define NOMADIK_RNG_BASE        0x101B0000      /* Random number generator */
+#define NOMADIK_SRC_BASE        0x101E0000      /* SRC base */
+#define NOMADIK_WDOG_BASE       0x101E1000      /* Watchdog */
+#define NOMADIK_MTU0_BASE       0x101E2000      /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE       0x101E3000      /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE      0x101E4000      /* GPIO0 */
+#define NOMADIK_GPIO1_BASE      0x101E5000      /* GPIO1 */
+#define NOMADIK_GPIO2_BASE      0x101E6000      /* GPIO2 */
+#define NOMADIK_GPIO3_BASE      0x101E7000      /* GPIO3 */
+#define NOMADIK_RTC_BASE        0x101E8000      /* Real Time Clock base */
+#define NOMADIK_PMU_BASE        0x101E9000      /* Power Management Unit */
+#define NOMADIK_OWM_BASE        0x101EA000      /* One wire master */
+#define NOMADIK_SCR_BASE        0x101EF000      /* Secure Control registers */
+#define NOMADIK_MSP2_BASE       0x101F0000      /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE       0x101F1000      /* MSP 1 interface */
+#define NOMADIK_UART2_BASE      0x101F2000      /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE      0x101F3000      /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE      0x101F4000      /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE       0x101F5000      /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE        0x101F6000      /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE       0x101F7000      /* I2C1 interface */
+#define NOMADIK_I2C0_BASE       0x101F8000      /* I2C0 interface */
+#define NOMADIK_MSP0_BASE       0x101F9000      /* MSP 0 interface  */
+#define NOMADIK_FIRDA_BASE      0x101FA000      /* FIrDA interface  */
+#define NOMADIK_UART1_BASE      0x101FB000      /* UART 1 interface */
+#define NOMADIK_SSP_BASE        0x101FC000      /* SSP interface  */
+#define NOMADIK_UART0_BASE      0x101FD000      /* UART 0 interface */
+#define NOMADIK_SGA_BASE        0x101FE000      /* SGA interface */
+#define NOMADIK_L2CC_BASE       0x10210000      /* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM      0x80010000
+#define NOMADIK_EBROM           0x80000000      /* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000     /* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF      /* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM     0xA0200000      /* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA         IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA         IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA         IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 000000000000..2e1eca1b8243
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h   (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 000000000000..8faabc560398
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  mach-nomadik/include/mach/irqs.h
+ *
+ *  Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START           0       /* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG                    0
+#define IRQ_SOFTINT                     1
+#define IRQ_CRYPTO                      2
+#define IRQ_OWM                         3
+#define IRQ_MTU0                        4
+#define IRQ_MTU1                        5
+#define IRQ_GPIO0                       6
+#define IRQ_GPIO1                       7
+#define IRQ_GPIO2                       8
+#define IRQ_GPIO3                       9
+#define IRQ_RTC_RTT                     10
+#define IRQ_SSP                         11
+#define IRQ_UART0                       12
+#define IRQ_DMA1                        13
+#define IRQ_CLCD_MDIF                   14
+#define IRQ_DMA0                        15
+#define IRQ_PWRFAIL                     16
+#define IRQ_UART1                       17
+#define IRQ_FIRDA                       18
+#define IRQ_MSP0                        19
+#define IRQ_I2C0                        20
+#define IRQ_I2C1                        21
+#define IRQ_SDMMC                       22
+#define IRQ_USBOTG                      23
+#define IRQ_SVA_IT0                     24
+#define IRQ_SVA_IT1                     25
+#define IRQ_SAA_IT0                     26
+#define IRQ_SAA_IT1                     27
+#define IRQ_UART2                       28
+#define IRQ_MSP2                        31
+#define IRQ_L2CC                        48
+#define IRQ_HPI                         49
+#define IRQ_SKE                         50
+#define IRQ_KP                          51
+#define IRQ_MEMST                       54
+#define IRQ_SGA_IT                      58
+#define IRQ_USBM                        60
+#define IRQ_MSP1                        62
+
+#define NOMADIK_SOC_NR_IRQS             64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO                 128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio)       ((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)        ((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS                         NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0          0
+#define VIC_REG_IRQSR1          0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 000000000000..1e5689d98ecd
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ *  mach-nomadik/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 000000000000..76da7f085330
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC        0x00    /* Interrupt mask set/clear */
+#define MTU_RIS         0x04    /* Raw interrupt status */
+#define MTU_MIS         0x08    /* Masked interrupt status */
+#define MTU_ICR         0x0C    /* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)       (0x10 + 0x10 * (x) + 0x00)      /* Load value */
+#define MTU_VAL(x)      (0x10 + 0x10 * (x) + 0x04)      /* Current value */
+#define MTU_CR(x)       (0x10 + 0x10 * (x) + 0x08)      /* Control reg */
+#define MTU_BGLR(x)     (0x10 + 0x10 * (x) + 0x0c)      /* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA             0x80
+#define MTU_CRn_PERIODIC        0x40    /* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK   0x0c
+#define MTU_CRn_PRESCALE_1              0x00
+#define MTU_CRn_PRESCALE_16             0x04
+#define MTU_CRn_PRESCALE_256            0x08
+#define MTU_CRn_32BITS          0x02
+#define MTU_CRn_ONESHOT         0x01    /* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR        0xff0
+#define MTU_ITOP        0xff4
+
+#define MTU_PERIPH_ID0  0xfe0
+#define MTU_PERIPH_ID1  0xfe4
+#define MTU_PERIPH_ID2  0xfe8
+#define MTU_PERIPH_ID3  0xfeC
+
+#define MTU_PCELL0      0xff0
+#define MTU_PCELL1      0xff4
+#define MTU_PCELL2      0xff8
+#define MTU_PCELL3      0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 000000000000..a4e468cf63da
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 000000000000..7119f688116e
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ *  mach-nomadik/include/mach/system.h
+ *
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+        /*
+         * This should do all the clock switching
+         * and wait for interrupt tricks
+         */
+        cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+        void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+        /* FIXME: use egpio when implemented */
+
+        /* Write anything to Reset status register */
+        writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 000000000000..318b8896ce96
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 000000000000..071003bc8456
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR         0x101FB000
+#define NOMADIK_UART_LCRH       0x101FB02c
+#define NOMADIK_UART_CR         0x101FB030
+#define NOMADIK_UART_FR         0x101FB018
+
+static void putc(const char c)
+{
+        /* Do nothing if the UART is not enabled. */
+        if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+                return;
+
+        if (c == '\n')
+                putc('\r');
+
+        while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+                barrier();
+        writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+        if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+                return;
+        while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+                barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 000000000000..be12e31ea528
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END       0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 000000000000..d1738e7061d4
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL      0x80    /* No divisor */
+#define TIMER_PERIODIC  0x40
+#define TIMER_SZ32BIT   0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK        0x00007fff
+#define SRC_CR_INIT_VAL         0x2aaa8000
+
+static u32      nmdk_count;             /* accumulated count */
+static u32      nmdk_cycle;             /* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+        u32 count = readl(mtu_base + MTU_VAL(0));
+        return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+        .name           = "mtu_0",
+        .rating         = 120,
+        .read           = nmdk_read_timer,
+        .shift          = 20,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+                             struct clock_event_device *dev)
+{
+        unsigned long flags;
+
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC:
+                /* enable interrupts -- and count current value? */
+                raw_local_irq_save(flags);
+                writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+                raw_local_irq_restore(flags);
+                break;
+        case CLOCK_EVT_MODE_ONESHOT:
+                BUG(); /* Not supported, yet */
+                /* FALLTHROUGH */
+        case CLOCK_EVT_MODE_SHUTDOWN:
+        case CLOCK_EVT_MODE_UNUSED:
+                /* disable irq */
+                raw_local_irq_save(flags);
+                writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+                raw_local_irq_restore(flags);
+                break;
+        case CLOCK_EVT_MODE_RESUME:
+                break;
+        }
+}
+
+static struct clock_event_device nmdk_clkevt = {
+        .name           = "mtu_0",
+        .features       = CLOCK_EVT_FEAT_PERIODIC,
+        .shift          = 32,
+        .rating         = 100,
+        .set_mode       = nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+        /* ack: "interrupt clear register" */
+        writel( 1 << 0, mtu_base + MTU_ICR);
+
+        /* we can't count lost ticks, unfortunately */
+        nmdk_count += nmdk_cycle;
+        nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+        return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+        .name           = "Nomadik Timer Tick",
+        .flags          = IRQF_DISABLED | IRQF_TIMER,
+        .handler        = nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+        u32 cr;
+
+        writel(0, mtu_base + MTU_CR(0)); /* off */
+
+        /* configure load and background-load, and fire it up */
+        writel(nmdk_cycle, mtu_base + MTU_LR(0));
+        writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+        cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+        writel(cr, mtu_base + MTU_CR(0));
+        writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+        u32 src_cr;
+        unsigned long rate;
+        int bits;
+
+        rate = CLOCK_TICK_RATE; /* 2.4MHz */
+        nmdk_cycle = (rate + HZ/2) / HZ;
+
+        /* Configure timer sources in "system reset controller" ctrl reg */
+        src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+        src_cr &= SRC_CR_INIT_MASK;
+        src_cr |= SRC_CR_INIT_VAL;
+        writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+        /* Save global pointer to mtu, used by functions above */
+        mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+        /* Init the timer and register clocksource */
+        nmdk_timer_reset();
+
+        nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+        bits =  8*sizeof(nmdk_count);
+        nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+        clocksource_register(&nmdk_clksrc);
+
+        /* Register irq and clockevents */
+        setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+        nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+        nmdk_clkevt.cpumask = cpumask_of(0);
+        clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+        .init           = nmdk_timer_init,
+};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c6..7e1e721f0324 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 };
 
 static struct omap_uart_config sdp4430_uart_config __initdata = {
-        .enabled_uarts  = (1 << 0) | (1 << 1) | (1 << 2),
+        .enabled_uarts  = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528fbfb5..e26af837510b 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -51,6 +51,7 @@
 
 #define OVERO_GPIO_BT_XGATE     15
 #define OVERO_GPIO_W2W_NRESET   16
+#define OVERO_GPIO_PENDOWN      114
 #define OVERO_GPIO_BT_NRESET    164
 #define OVERO_GPIO_USBH_CPEN    168
 #define OVERO_GPIO_USBH_NRESET  183
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93bf86d3..f3c91a1ca391 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION            OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG           OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL             OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION            OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG           OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL             OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET     0x0070
 #define OMAP3430_CM_CLKOUT_CTRL         OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 99b6e1546311..d7288f1dc64f 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -168,6 +168,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ         0
 #endif
 
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+        {
+                .phys_base      = OMAP44XX_MCBSP1_BASE,
+                .dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
+                .dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
+                .rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+        },
+        {
+                .phys_base      = OMAP44XX_MCBSP2_BASE,
+                .dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
+                .dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
+                .rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+        },
+        {
+                .phys_base      = OMAP44XX_MCBSP3_BASE,
+                .dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
+                .dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
+                .rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+        },
+        {
+                .phys_base      = OMAP44XX_MCBSP4_BASE,
+                .dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
+                .dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
+                .rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+                .tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+                .ops            = &omap2_mcbsp_ops,
+        },
+};
+#define OMAP44XX_MCBSP_PDATA_SZ         ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
 static int __init omap2_mcbsp_init(void)
 {
         if (cpu_is_omap2420())
@@ -176,6 +212,8 @@ static int __init omap2_mcbsp_init(void)
                 omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
         if (cpu_is_omap34xx())
                 omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+        if (cpu_is_omap44xx())
+                omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
 
         mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
                                                                 GFP_KERNEL);
@@ -191,6 +229,9 @@ static int __init omap2_mcbsp_init(void)
         if (cpu_is_omap34xx())
                 omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
                                                 OMAP34XX_MCBSP_PDATA_SZ);
+        if (cpu_is_omap44xx())
+                omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+                                                OMAP44XX_MCBSP_PDATA_SZ);
 
         return omap_mcbsp_init();
 }
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf76678..21201cd4117b 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db1025562fb0..528dbdc26e23 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
                           WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
         u32 l;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5ed8be..488d595d8e4b 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
 struct power_state {
         struct powerdomain *pwrdm;
         u32 next_state;
+#ifdef CONFIG_SUSPEND
         u32 saved_state;
+#endif
         struct list_head node;
 };
 
@@ -293,6 +295,9 @@ out:
         local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
         disable_hlt();
@@ -321,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
         /* Restore next_pwrsts */
         list_for_each_entry(pwrst, &pwrst_list, node) {
-                set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
                 state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
                 if (state > pwrst->next_state) {
                         printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@ restore:
                                pwrst->pwrdm->name, pwrst->next_state);
                         ret = -1;
                 }
+                set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
         }
         if (ret)
                 printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@ restore:
         return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
         int ret = 0;
 
-        switch (state) {
+        switch (suspend_state) {
         case PM_SUSPEND_STANDBY:
         case PM_SUSPEND_MEM:
                 ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@ static void omap3_pm_finish(void)
         enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+        suspend_state = state;
+        omap_uart_enable_irqs(0);
+        return 0;
+}
+
+static void omap3_pm_end(void)
+{
+        suspend_state = PM_SUSPEND_ON;
+        omap_uart_enable_irqs(1);
+        return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+        .begin          = omap3_pm_begin,
+        .end            = omap3_pm_end,
         .prepare        = omap3_pm_prepare,
         .enter          = omap3_pm_enter,
         .finish         = omap3_pm_finish,
         .valid          = suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void)
         /* Clear any pending PRCM interrupts */
         prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+        /* Don't attach IVA interrupts */
+        prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+        prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+        prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+        prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+        /* Clear any pending 'reset' flags */
+        prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+        prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+        /* Clear any pending PRCM interrupts */
+        prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
         omap3_iva_idle();
         omap3_d2d_idle();
 }
@@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
         return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
         struct power_state *pwrst, *tmp;
         int ret;
@@ -692,7 +733,9 @@ int __init omap3_pm_init(void)
         _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
                                          omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
         suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
         pm_idle = omap3_pm_idle;
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe47..ce22344b94e7 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@ struct omap_uart_state {
 
         struct plat_serial8250_port *p;
         struct list_head node;
+        struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
         int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
         {
                 .membase        = IO_ADDRESS(OMAP_UART1_BASE),
                 .mapbase        = OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .regshift       = 2,
                 .uartclk        = OMAP24XX_BASE_BAUD * 16,
         }, {
+                .flags          = 0
+        }
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+        {
                 .membase        = IO_ADDRESS(OMAP_UART2_BASE),
                 .mapbase        = OMAP_UART2_BASE,
                 .irq            = 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .regshift       = 2,
                 .uartclk        = OMAP24XX_BASE_BAUD * 16,
         }, {
+                .flags          = 0
+        }
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+        {
                 .membase        = IO_ADDRESS(OMAP_UART3_BASE),
                 .mapbase        = OMAP_UART3_BASE,
                 .irq            = 74,
@@ -97,6 +109,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .regshift       = 2,
                 .uartclk        = OMAP24XX_BASE_BAUD * 16,
         }, {
+#ifdef CONFIG_ARCH_OMAP4
+                .membase        = IO_ADDRESS(OMAP_UART4_BASE),
+                .mapbase        = OMAP_UART4_BASE,
+                .irq            = 70,
+                .flags          = UPF_BOOT_AUTOCONF,
+                .iotype         = UPIO_MEM,
+                .regshift       = 2,
+                .uartclk        = OMAP24XX_BASE_BAUD * 16,
+        }, {
+#endif
                 .flags          = 0
         }
 };
@@ -217,6 +239,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
         clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+        /* Set wake-enable bit */
+        if (uart->wk_en && uart->wk_mask) {
+                u32 v = __raw_readl(uart->wk_en);
+                v |= uart->wk_mask;
+                __raw_writel(v, uart->wk_en);
+        }
+
+        /* Ensure IOPAD wake-enables are set */
+        if (cpu_is_omap34xx() && uart->padconf) {
+                u16 v = omap_ctrl_readw(uart->padconf);
+                v |= OMAP3_PADCONF_WAKEUPENABLE0;
+                omap_ctrl_writew(v, uart->padconf);
+        }
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+        /* Clear wake-enable bit */
+        if (uart->wk_en && uart->wk_mask) {
+                u32 v = __raw_readl(uart->wk_en);
+                v &= ~uart->wk_mask;
+                __raw_writel(v, uart->wk_en);
+        }
+
+        /* Ensure IOPAD wake-enables are cleared */
+        if (cpu_is_omap34xx() && uart->padconf) {
+                u16 v = omap_ctrl_readw(uart->padconf);
+                v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+                omap_ctrl_writew(v, uart->padconf);
+        }
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
                                           int enable)
 {
@@ -246,6 +302,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+        if (device_may_wakeup(&uart->pdev.dev))
+                omap_uart_enable_wakeup(uart);
+        else
+                omap_uart_disable_wakeup(uart);
+
         if (!uart->clocked)
                 return;
 
@@ -292,7 +353,6 @@ void omap_uart_resume_idle(int num)
                         /* Check for normal UART wakeup */
                         if (__raw_readl(uart->wk_st) & uart->wk_mask)
                                 omap_uart_block_sleep(uart);
-
                         return;
                 }
         }
@@ -346,16 +406,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
         return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-        u32 v;
         struct plat_serial8250_port *p = uart->p;
         int ret;
 
         uart->can_sleep = 0;
-        uart->timeout = sleep_timeout;
+        uart->timeout = DEFAULT_TIMEOUT;
         setup_timer(&uart->timer, omap_uart_idle_timer,
                     (unsigned long) uart);
         mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -413,76 +470,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
                 uart->padconf = 0;
         }
 
-        /* Set wake-enable bit */
-        if (uart->wk_en && uart->wk_mask) {
-                v = __raw_readl(uart->wk_en);
-                v |= uart->wk_mask;
-                __raw_writel(v, uart->wk_en);
-        }
-
-        /* Ensure IOPAD wake-enables are set */
-        if (cpu_is_omap34xx() && uart->padconf) {
-                u16 v;
-
-                v = omap_ctrl_readw(uart->padconf);
-                v |= OMAP3_PADCONF_WAKEUPENABLE0;
-                omap_ctrl_writew(v, uart->padconf);
-        }
-
         p->flags |= UPF_SHARE_IRQ;
         ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
                           "serial idle", (void *)uart);
         WARN_ON(ret);
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-                                  struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+        int ret;
+        struct omap_uart_state *uart;
+
+        list_for_each_entry(uart, &uart_list, node) {
+                if (enable)
+                        ret = request_irq(uart->p->irq, omap_uart_interrupt,
+                                IRQF_SHARED, "serial idle", (void *)uart);
+                else
+                        free_irq(uart->p->irq, (void *)uart);
+        }
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+                                  struct device_attribute *attr,
                                   char *buf)
 {
-        return sprintf(buf, "%u\n", sleep_timeout / HZ);
+        struct platform_device *pdev = container_of(dev,
+                                        struct platform_device, dev);
+        struct omap_uart_state *uart = container_of(pdev,
+                                        struct omap_uart_state, pdev);
+
+        return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-                                   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+                                   struct device_attribute *attr,
                                    const char *buf, size_t n)
 {
-        struct omap_uart_state *uart;
+        struct platform_device *pdev = container_of(dev,
+                                        struct platform_device, dev);
+        struct omap_uart_state *uart = container_of(pdev,
+                                        struct omap_uart_state, pdev);
         unsigned int value;
 
         if (sscanf(buf, "%u", &value) != 1) {
                 printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
                 return -EINVAL;
         }
-        sleep_timeout = value * HZ;
-        list_for_each_entry(uart, &uart_list, node) {
-                uart->timeout = sleep_timeout;
-                if (uart->timeout)
-                        mod_timer(&uart->timer, jiffies + uart->timeout);
-                else
-                        /* A zero value means disable timeout feature */
-                        omap_uart_block_sleep(uart);
-        }
+
+        uart->timeout = value * HZ;
+        if (uart->timeout)
+                mod_timer(&uart->timer, jiffies + uart->timeout);
+        else
+                /* A zero value means disable timeout feature */
+                omap_uart_block_sleep(uart);
+
         return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-        __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-        .name                   = "serial8250",
-        .id                     = PLAT8250_DEV_PLATFORM,
-        .dev                    = {
-                .platform_data  = serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+        {
+                .pdev = {
+                        .name                   = "serial8250",
+                        .id                     = PLAT8250_DEV_PLATFORM,
+                        .dev                    = {
+                                .platform_data  = serial_platform_data0,
+                        },
+                },
+        }, {
+                .pdev = {
+                        .name                   = "serial8250",
+                        .id                     = PLAT8250_DEV_PLATFORM1,
+                        .dev                    = {
+                                .platform_data  = serial_platform_data1,
+                        },
+                },
+        }, {
+                .pdev = {
+                        .name                   = "serial8250",
+                        .id                     = PLAT8250_DEV_PLATFORM2,
+                        .dev                    = {
+                                .platform_data  = serial_platform_data2,
+                        },
+                },
         },
 };
 
 void __init omap_serial_init(void)
 {
-        int i, err;
+        int i;
         const struct omap_uart_config *info;
         char name[16];
 
@@ -496,14 +578,12 @@ void __init omap_serial_init(void)
 
         if (info == NULL)
                 return;
-        if (cpu_is_omap44xx()) {
-                for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-                        serial_platform_data[i].irq += 32;
-        }
 
         for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-                struct plat_serial8250_port *p = serial_platform_data + i;
                 struct omap_uart_state *uart = &omap_uart[i];
+                struct platform_device *pdev = &uart->pdev;
+                struct device *dev = &pdev->dev;
+                struct plat_serial8250_port *p = dev->platform_data;
 
                 if (!(info->enabled_uarts & (1 << i))) {
                         p->membase = NULL;
@@ -531,20 +611,21 @@ void __init omap_serial_init(void)
                 uart->num = i;
                 p->private_data = uart;
                 uart->p = p;
-                list_add(&uart->node, &uart_list);
+                list_add_tail(&uart->node, &uart_list);
+
+                if (cpu_is_omap44xx())
+                        p->irq += 32;
 
                 omap_uart_enable_clocks(uart);
                 omap_uart_reset(uart);
                 omap_uart_idle_init(uart);
-        }
-
-        err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-        if (!err)
-                err = sysfs_create_file(&serial_device.dev.kobj,
-                                        &sleep_timeout_attr.attr);
-#endif
 
+                if (WARN_ON(platform_device_register(pdev)))
+                        continue;
+                if ((cpu_is_omap34xx() && uart->padconf) ||
+                    (uart->wk_en && uart->wk_mask)) {
+                        device_init_wakeup(dev, true);
+                        DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+                }
+        }
 }
-
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcbf..c3d513cad5ac 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,27 @@ config MACH_EDMINI_V2
           Say 'Y' here if you want your kernel to support the
           LaCie Ethernet Disk mini V2.
 
+config MACH_D2NET
+        bool "LaCie d2 Network"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+        bool "LaCie Big Disk Network"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          LaCie Big Disk Network NAS.
+
+config MACH_NET2BIG
+        bool "LaCie 2Big Network"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          LaCie 2Big Network NAS.
+
 config MACH_MSS2
         bool "Maxtor Shared Storage II"
         help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856f..89772fcd65c7 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,9 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)       += ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)       += mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)    += edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET)        += d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK)      += d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG)      += net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)         += mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)      += wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)        += rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb6..1a5d6a0e2602 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
         orion5x_pcie_id(&dev, &rev);
         if ((dev == MV88F5281_DEV_ID && win < 4)
             || (dev == MV88F5182_DEV_ID && win < 2)
-            || (dev == MV88F5181_DEV_ID && win < 2))
+            || (dev == MV88F5181_DEV_ID && win < 2)
+            || (dev == MV88F6183_DEV_ID && win < 4))
                 return 1;
 
         return 0;
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 000000000000..9d4bf763f25b
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE             0xfff80000
+#define D2NET_NOR_BOOT_SIZE             SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+        {
+                .name           = "Full512kb",
+                .size           = MTDPART_SIZ_FULL,
+                .offset         = 0,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+        .width          = 1,
+        .parts          = d2net_partitions,
+        .nr_parts       = ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+        .flags                  = IORESOURCE_MEM,
+        .start                  = D2NET_NOR_BOOT_BASE,
+        .end                    = D2NET_NOR_BOOT_BASE
+                                        + D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &d2net_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x3e     | GMT G762     | PWM fan controller
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("rs5c372b", 0x32),
+        }, {
+                I2C_BOARD_INFO("24c08", 0x50),
+        },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+        .n_ports        = 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER  3
+#define D2NET_GPIO_SATA1_POWER  12
+
+static void __init d2net_sata_power_init(void)
+{
+        int err;
+
+        err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+        if (err == 0) {
+                err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+                if (err)
+                        gpio_free(D2NET_GPIO_SATA0_POWER);
+        }
+        if (err)
+                pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+        err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+        if (err == 0) {
+                err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+                if (err)
+                        gpio_free(D2NET_GPIO_SATA1_POWER);
+        }
+        if (err)
+                pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED              6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL  16
+#define D2NET_GPIO_BLUE_LED_OFF         23
+#define D2NET_GPIO_SATA0_ACT            14
+#define D2NET_GPIO_SATA1_ACT            15
+
+static struct gpio_led d2net_leds[] = {
+        {
+                .name = "d2net:blue:power",
+                .gpio = D2NET_GPIO_BLUE_LED_OFF,
+                .active_low = 1,
+        },
+        {
+                .name = "d2net:red:fail",
+                .gpio = D2NET_GPIO_RED_LED,
+        },
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+        .num_leds = ARRAY_SIZE(d2net_leds),
+        .leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &d2net_led_data,
+        },
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+        /* Configure GPIO over MPP max number. */
+        orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+        if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+                return;
+        if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+                goto err_free_1;
+        if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+                goto err_free_1;
+        if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+                goto err_free_2;
+        platform_device_register(&d2net_gpio_leds);
+        return;
+
+err_free_2:
+        gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+        gpio_free(D2NET_GPIO_SATA0_ACT);
+        return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON          18
+#define D2NET_GPIO_POWER_SWITCH_ON      8
+#define D2NET_GPIO_POWER_SWITCH_OFF     9
+
+#define D2NET_SWITCH_POWER_ON           0x1
+#define D2NET_SWITCH_POWER_OFF          0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+        {
+                .type           = EV_SW,
+                .code           = D2NET_SWITCH_POWER_OFF,
+                .gpio           = D2NET_GPIO_POWER_SWITCH_OFF,
+                .desc           = "Power rocker switch (auto|off)",
+                .active_low     = 0,
+        },
+        {
+                .type           = EV_SW,
+                .code           = D2NET_SWITCH_POWER_ON,
+                .gpio           = D2NET_GPIO_POWER_SWITCH_ON,
+                .desc           = "Power rocker switch (on|auto)",
+                .active_low     = 0,
+        },
+        {
+                .type           = EV_KEY,
+                .code           = KEY_POWER,
+                .gpio           = D2NET_GPIO_PUSH_BUTTON,
+                .desc           = "Front Push Button",
+                .active_low     = 0,
+        },
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+        .buttons        = d2net_buttons,
+        .nbuttons       = ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &d2net_button_data,
+        },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },       /* Board ID (bit 0) */
+        {  1, MPP_GPIO },       /* Board ID (bit 1) */
+        {  2, MPP_GPIO },       /* Board ID (bit 2) */
+        {  3, MPP_GPIO },       /* SATA 0 power */
+        {  4, MPP_UNUSED },
+        {  5, MPP_GPIO },       /* Fan fail detection */
+        {  6, MPP_GPIO },       /* Red front LED */
+        {  7, MPP_UNUSED },
+        {  8, MPP_GPIO },       /* Rear power switch (on|auto) */
+        {  9, MPP_GPIO },       /* Rear power switch (auto|off) */
+        { 10, MPP_UNUSED },
+        { 11, MPP_UNUSED },
+        { 12, MPP_GPIO },       /* SATA 1 power */
+        { 13, MPP_UNUSED },
+        { 14, MPP_GPIO },       /* SATA 0 active */
+        { 15, MPP_GPIO },       /* SATA 1 active */
+        { 16, MPP_GPIO },       /* Blue front LED blink control */
+        { 17, MPP_UNUSED },
+        { 18, MPP_GPIO },       /* Front button (0 = Released, 1 = Pushed ) */
+        { 19, MPP_UNUSED },
+        { -1 }
+        /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+        /* 23: Blue front LED off */
+        /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(d2net_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_eth_init(&d2net_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+
+        d2net_sata_power_init();
+        orion5x_sata_init(&d2net_sata_data);
+
+        orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+                                D2NET_NOR_BOOT_SIZE);
+        platform_device_register(&d2net_nor_flash);
+
+        platform_device_register(&d2net_gpio_buttons);
+
+        d2net_gpio_leds_init();
+
+        pr_notice("d2net: Flash write are not yet supported.\n");
+
+        i2c_register_board_info(0, d2net_i2c_devices,
+                                ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = d2net_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = d2net_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 000000000000..7bd6283476f9
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE           0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE           SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+        {
+                .name           = "Full512kb",
+                .size           = MTDPART_SIZ_FULL,
+                .offset         = 0x00000000,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+        .width          = 1,
+        .parts          = net2big_partitions,
+        .nr_parts       = ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+        .flags                  = IORESOURCE_MEM,
+        .start                  = NET2BIG_NOR_BOOT_BASE,
+        .end                    = NET2BIG_NOR_BOOT_BASE
+                                        + NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &net2big_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("rs5c372b", 0x32),
+        }, {
+                I2C_BOARD_INFO("24c08", 0x50),
+        },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+        .n_ports        = 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ     19
+#define NET2BIG_GPIO_SATA0_POWER        23
+#define NET2BIG_GPIO_SATA1_POWER        25
+
+static void __init net2big_sata_power_init(void)
+{
+        int err;
+
+        /* Configure GPIOs over MPP max number. */
+        orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+        orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+        err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+        if (err == 0) {
+                err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_SATA0_POWER);
+        }
+        if (err) {
+                pr_err("net2big: failed to setup SATA0 power GPIO\n");
+                return;
+        }
+
+        err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+        if (err == 0) {
+                err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_SATA1_POWER);
+        }
+        if (err) {
+                pr_err("net2big: failed to setup SATA1 power GPIO\n");
+                goto err_free_1;
+        }
+
+        err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+        if (err == 0) {
+                err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+        }
+        if (err) {
+                pr_err("net2big: failed to setup SATA power request GPIO\n");
+                goto err_free_2;
+        }
+
+        if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+                gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+                return;
+        }
+
+        /*
+         * SATA power up on both disk is done by pulling high the CPLD power
+         * request line. The 300ms delay is related to the CPLD clock and is
+         * needed to be sure that the CPLD has take into account the low line
+         * status.
+         */
+        msleep(300);
+        gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+        pr_info("net2big: power up SATA hard disks\n");
+
+        return;
+
+err_free_2:
+        gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+        gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+        return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED        6
+#define NET2BIG_GPIO_PWR_BLUE_LED       16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP 7
+
+#define NET2BIG_GPIO_SATA0_RED_LED      11
+#define NET2BIG_GPIO_SATA1_RED_LED      10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED     17
+#define NET2BIG_GPIO_SATA1_BLUE_LED     13
+
+static struct gpio_led net2big_leds[] = {
+        {
+                .name = "net2big:red:power",
+                .gpio = NET2BIG_GPIO_PWR_RED_LED,
+        },
+        {
+                .name = "net2big:blue:power",
+                .gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+        },
+        {
+                .name = "net2big:red:sata0",
+                .gpio = NET2BIG_GPIO_SATA0_RED_LED,
+        },
+        {
+                .name = "net2big:red:sata1",
+                .gpio = NET2BIG_GPIO_SATA1_RED_LED,
+        },
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+        .num_leds = ARRAY_SIZE(net2big_leds),
+        .leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+        .name           = "leds-gpio",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &net2big_led_data,
+        },
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+        int err;
+
+        /* Stop initial CPLD slow red/blue blinking on power LED. */
+        err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+                           "Power LED blink stop");
+        if (err == 0) {
+                err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+        }
+        if (err)
+                pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+        /*
+         * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+         * hard disk activity.
+         */
+        err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+                           "SATA0 blue LED control");
+        if (err == 0) {
+                err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+        }
+        if (err)
+                pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+        err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+                           "SATA1 blue LED control");
+        if (err == 0) {
+                err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+                if (err)
+                        gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+        }
+        if (err)
+                pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+        platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON        18
+#define NET2BIG_GPIO_POWER_SWITCH_ON    8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF   9
+
+#define NET2BIG_SWITCH_POWER_ON         0x1
+#define NET2BIG_SWITCH_POWER_OFF        0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+        {
+                .type           = EV_SW,
+                .code           = NET2BIG_SWITCH_POWER_OFF,
+                .gpio           = NET2BIG_GPIO_POWER_SWITCH_OFF,
+                .desc           = "Power rocker switch (auto|off)",
+                .active_low     = 0,
+        },
+        {
+                .type           = EV_SW,
+                .code           = NET2BIG_SWITCH_POWER_ON,
+                .gpio           = NET2BIG_GPIO_POWER_SWITCH_ON,
+                .desc           = "Power rocker switch (on|auto)",
+                .active_low     = 0,
+        },
+        {
+                .type           = EV_KEY,
+                .code           = KEY_POWER,
+                .gpio           = NET2BIG_GPIO_PUSH_BUTTON,
+                .desc           = "Front Push Button",
+                .active_low     = 0,
+        },
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+        .buttons        = net2big_buttons,
+        .nbuttons       = ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .dev            = {
+                .platform_data  = &net2big_button_data,
+        },
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO },       /* Raid mode (bit 0) */
+        {  1, MPP_GPIO },       /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+        {  2, MPP_GPIO },       /* Raid mode (bit 1) */
+        {  3, MPP_GPIO },       /* Board ID (bit 0) */
+        {  4, MPP_GPIO },       /* Fan activity (0 = Off, 1 = On) */
+        {  5, MPP_GPIO },       /* Fan fail detection */
+        {  6, MPP_GPIO },       /* Red front LED (0 = Off, 1 = On) */
+        {  7, MPP_GPIO },       /* Disable initial blinking on front LED */
+        {  8, MPP_GPIO },       /* Rear power switch (on|auto) */
+        {  9, MPP_GPIO },       /* Rear power switch (auto|off) */
+        { 10, MPP_GPIO },       /* SATA 1 red LED (0 = Off, 1 = On) */
+        { 11, MPP_GPIO },       /* SATA 0 red LED (0 = Off, 1 = On) */
+        { 12, MPP_GPIO },       /* Board ID (bit 1) */
+        { 13, MPP_GPIO },       /* SATA 1 blue LED blink control */
+        { 14, MPP_SATA_LED },
+        { 15, MPP_SATA_LED },
+        { 16, MPP_GPIO },       /* Blue front LED control */
+        { 17, MPP_GPIO },       /* SATA 0 blue LED blink control */
+        { 18, MPP_GPIO },       /* Front button (0 = Released, 1 = Pushed ) */
+        { 19, MPP_GPIO },       /* SATA{0,1} power On/Off request */
+        { -1 }
+        /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+        /* 23: SATA 0 power status */
+        /* 24: Board power off */
+        /* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF          24
+
+static void net2big_power_off(void)
+{
+        gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(net2big_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&net2big_eth_data);
+        orion5x_i2c_init();
+        orion5x_uart0_init();
+        orion5x_xor_init();
+
+        net2big_sata_power_init();
+        orion5x_sata_init(&net2big_sata_data);
+
+        orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+                                   NET2BIG_NOR_BOOT_SIZE);
+        platform_device_register(&net2big_nor_flash);
+
+        platform_device_register(&net2big_gpio_buttons);
+        net2big_gpio_leds_init();
+
+        i2c_register_board_info(0, net2big_i2c_devices,
+                                ARRAY_SIZE(net2big_i2c_devices));
+
+        orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+        if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+            gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+                pm_power_off = net2big_power_off;
+        else
+                pr_err("net2big: failed to configure power-off GPIO\n");
+
+        pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = net2big_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index ae8441192ef0..7139e0dc26d1 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7  MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR    MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR        MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT        MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP        MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR        MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT        MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP        MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 6f678d93bf4e..09b7b1a10cad 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
         INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
         /* Power I2C clock is always on */
-        INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+        INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
         INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
         INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
         INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa2145386..dfc9b0bc6eb2 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
 
 config REALVIEW_HIGH_PHYS_OFFSET
         bool "High physical base address for the RealView platform"
-        depends on !MACH_REALVIEW_PB1176
+        depends on MMU && !MACH_REALVIEW_PB1176
         default y
         help
           RealView boards other than PB1176 have the RAM available at
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index ab615e78b798..dc3519c50ab2 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
         {
-                I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-                .type = "ds1338",
+                I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
         },
 };
 
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89acb..8a638d15797f 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
 /*
  * Statically mapped addresses:
  *
@@ -33,6 +34,9 @@
  * 1fxx xxxx -> fexx xxxx
  */
 #define IO_ADDRESS(x)           (((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x)           (x)
+#endif
 #define __io_address(n)         __io(IO_ADDRESS(n))
 
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3a..a88458b4799d 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/localtimer.h>
+#include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init poke_milo(void)
 {
-        extern void secondary_startup(void);
-
         /* nobody is to be released from the pen yet */
         pen_release = -1;
 
         /*
-         * write the address of secondary startup into the system-wide
-         * flags register, then clear the bottom two bits, which is what
-         * BootMonitor is waiting for
+         * Write the address of secondary startup into the system-wide flags
+         * register. The BootMonitor waits for this register to become
+         * non-zero.
          */
-#if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-        __raw_writel(virt_to_phys(realview_secondary_startup),
-                     __io_address(REALVIEW_SYS_BASE) +
-                     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
-        __raw_writel(3,
+        __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
                      __io_address(REALVIEW_SYS_BASE) +
-                     REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+                     REALVIEW_SYS_FLAGSS_OFFSET);
 
         mb();
 }
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91f..d8c023d4df30 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
         select S3C2410_GPIO
         select CPU_LLSERIAL_S3C2410
         select S3C2410_PM if PM
+        select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
         help
           Support for S3C2410 and S3C2410A family from the S3C24XX line
           of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
           Internal node for machines with an BAST style IDE
           interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+        select S3C2410_CPUFREQ_UTILS
+        help
+          CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+        bool
+        depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+        default y
+        help
+          Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
 config ARCH_BAST
         bool "Simtec Electronics BAST (EB2410ITX)"
         select CPU_S3C2410
+        select S3C2410_IOTIMING if S3C2410_CPUFREQ
         select PM_SIMTEC if PM
         select SIMTEC_NOR
         select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711c..2ab5ba4b266f 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)   += dma.o
 obj-$(CONFIG_S3C2410_PM)        += pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)      += gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)   += cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)  += pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 000000000000..9d1186877d08
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        u32 clkdiv = 0;
+
+        if (cfg->divs.h_divisor == 2)
+                clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long hclk, fclk, pclk;
+        unsigned int hdiv, pdiv;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        hclk_max = cfg->max.hclk;
+
+        cfg->freq.armclk = fclk;
+
+        s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+                      __func__, fclk, hclk_max);
+
+        hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+        hclk = fclk / hdiv;
+
+        if (hclk > cfg->max.hclk) {
+                s3c_freq_dbg("%s: hclk too big\n", __func__);
+                return -EINVAL;
+        }
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+        pclk = hclk / pdiv;
+
+        if (pclk > cfg->max.pclk) {
+                s3c_freq_dbg("%s: pclk too big\n", __func__);
+                return -EINVAL;
+        }
+
+        pdiv *= hdiv;
+
+        /* record the result */
+        cfg->divs.p_divisor = pdiv;
+        cfg->divs.h_divisor = hdiv;
+
+        return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+        .max            = {
+                .fclk   = 200000000,
+                .hclk   = 100000000,
+                .pclk   =  50000000,
+        },
+
+        /* transition latency is about 5ms worst-case, so
+         * set 10ms to be sure */
+        .latency        = 10000000,
+
+        .locktime_m     = 150,
+        .locktime_u     = 150,
+        .locktime_bits  = 12,
+
+        .need_pll       = 1,
+
+        .name           = "s3c2410",
+        .calc_iotiming  = s3c2410_iotiming_calc,
+        .set_iotiming   = s3c2410_iotiming_set,
+        .get_iotiming   = s3c2410_iotiming_get,
+        .resume_clocks  = s3c2410_setup_clocks,
+
+        .set_fvco       = s3c2410_set_fvco,
+        .set_refresh    = s3c2410_cpufreq_setrefresh,
+        .set_divs       = s3c2410_cpufreq_setdivs,
+        .calc_divs      = s3c2410_cpufreq_calcdivs,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+        return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+        .add            = s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2410_sysclass,
+                                      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+        /* alter the maximum freq settings for S3C2410A. If a board knows
+         * it only has a maximum of 200, then it should register its own
+         * limits. */
+
+        s3c2410_cpufreq_info.max.fclk = 266000000;
+        s3c2410_cpufreq_info.max.hclk = 133000000;
+        s3c2410_cpufreq_info.max.pclk =  66500000;
+        s3c2410_cpufreq_info.name = "s3c2410a";
+
+        return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+        .add            = s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass,
+                                      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d992..63b753f56c64 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+        .add    = s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe192081d3a..f8b879a7973c 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
                 return NULL;
 
         chip = &s3c24xx_gpios[pin/32];
-        return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+        return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
 }
 
 #endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b1..6c12c6312ad8 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3         IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3        IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START               IRQ_EINT0
 
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1ca..b049e61460b6 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI  (0x48800000)
+#define S3C2412_VA_EBI  S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
@@ -103,5 +110,6 @@
 #define S3C_PA_UART         S3C24XX_PA_UART
 #define S3C_PA_USBHOST  S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0       S3C2443_PA_HSMMC
+#define S3C_PA_NAND         S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45ccf..f6e8eec879c8 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16       (0x02 << 16)
 #define S3C2400_GPD8_TOUT3      (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1   (0x03 << 16)
 
 #define S3C2410_GPD9_VD17       (0x02 << 18)
 #define S3C2400_GPD9_TCLK0      (0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1   (0x03 << 18)
 
 #define S3C2410_GPD10_VD18      (0x02 << 20)
 #define S3C2400_GPD10_nWAIT     (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1   (0x03 << 20)
 
 #define S3C2410_GPD11_VD19      (0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2fa..7f7c52947963 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7              (1<<30)
 #define S3C2410_BWSCON_ST7              (1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8              (0)
+#define S3C2410_BWSCON_DW16             (1)
+#define S3C2410_BWSCON_DW32             (2)
+#define S3C2410_BWSCON_WS               (1 << 2)
+#define S3C2410_BWSCON_ST               (1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0                S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1                S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf27123170..fb6352515090 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG                 S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1                S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH                 S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT                 S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR                  S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG             S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)            S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)              S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)             S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)            S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)           S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)           S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)                S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)                S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)           S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b1..193b39d654ed 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
                                               int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+                                               int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563b..5e2f35332056 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
         .resume         = s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
         return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+        .add            = s3c2410_irq_add,
+        .suspend        = s3c24xx_irq_suspend,
+        .resume         = s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7f..647c9adb018f 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -59,6 +60,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -547,7 +549,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
         },
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+        /* LCD contrast (0-6.6V) */
+        .in[0] = &(struct s3c_hwmon_chcfg) {
+                .name           = "lcd-contrast",
+                .mult           = 3300,
+                .div            = 512,
+        },
+        /* LED current feedback */
+        .in[1] = &(struct s3c_hwmon_chcfg) {
+                .name           = "led-feedback",
+                .mult           = 3300,
+                .div            = 1024,
+        },
+        /* LCD feedback (0-6.6V) */
+        .in[2] = &(struct s3c_hwmon_chcfg) {
+                .name           = "lcd-feedback",
+                .mult           = 3300,
+                .div            = 512,
+        },
+        /* Vcore (1.8-2.0V), Vref 3.3V  */
+        .in[3] = &(struct s3c_hwmon_chcfg) {
+                .name           = "vcore",
+                .mult           = 3300,
+                .div            = 1024,
+        },
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_usb,
@@ -556,6 +586,8 @@ static struct platform_device *bast_devices[] __initdata = {
         &s3c_device_i2c0,
         &s3c_device_rtc,
         &s3c_device_nand,
+        &s3c_device_adc,
+        &s3c_device_hwmon,
         &bast_device_dm9k,
         &bast_device_asix,
         &bast_device_axpp,
@@ -570,6 +602,12 @@ static struct clk *bast_clocks[] __initdata = {
         &s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+        .refresh        = 7800, /* 7.8usec */
+        .auto_io        = 1,
+        .need_io        = 1,
+};
+
 static void __init bast_map_io(void)
 {
         /* initialise the clocks */
@@ -588,6 +626,7 @@ static void __init bast_map_io(void)
         s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
         s3c_device_nand.dev.platform_data = &bast_nand_info;
+        s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
         s3c24xx_init_clocks(0);
@@ -608,6 +647,8 @@ static void __init bast_init(void)
 
         usb_simtec_init();
         nor_simtec_init();
+
+        s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 000000000000..f178c2fd9d85
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+        return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+        .add    = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+        return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+        .add    = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d4..966119c8efee 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+        .add            = s3c2410_pm_add,
+        .resume         = s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+        return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f915..91ba42f688ac 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
         s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+        .name   = "armclk",
+        .parent = &clk_f,
+        .id     = -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
         s3c24xx_register_baseclocks(xtal);
         s3c2410_setup_clocks();
         s3c2410_baseclk_add();
+        s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
         .name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+        .name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
         .cls            = &s3c2410_sysclass,
 };
@@ -133,9 +149,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+        return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
         printk("S3C2410: Initialising architecture\n");
 
         return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+        s3c2410_sysdev.cls = &s3c2410a_sysclass;
+        return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae7..35c1bde89cf2 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@ config S3C2412_PM
         help
           Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+        select S3C2412_IOTIMING
+        default y
+        help
+          CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a9..530ec46cbaea 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)       += gpio.o
 obj-$(CONFIG_S3C2412_DMA)       += dma.o
 obj-$(CONFIG_S3C2412_PM)        += pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)   += cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 000000000000..eb3ea1721335
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned int hdiv, pdiv, armdiv, dvs;
+        unsigned long hclk, fclk, armclk, armdiv_clk;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        armclk = cfg->freq.armclk;
+        hclk_max = cfg->max.hclk;
+
+        /* We can't run hclk above armclk as at the best we have to
+         * have armclk and hclk in dvs mode. */
+
+        if (hclk_max > armclk)
+                hclk_max = armclk;
+
+        s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+                     __func__, fclk, armclk, hclk_max);
+        s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+                     __func__, cfg->freq.fclk, cfg->freq.armclk,
+                     cfg->freq.hclk, cfg->freq.pclk);
+
+        armdiv = fclk / armclk;
+
+        if (armdiv < 1)
+                armdiv = 1;
+        if (armdiv > 2)
+                armdiv = 2;
+
+        cfg->divs.arm_divisor = armdiv;
+        armdiv_clk = fclk / armdiv;
+
+        hdiv = armdiv_clk / hclk_max;
+        if (hdiv < 1)
+                hdiv = 1;
+
+        cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+        /* set dvs depending on whether we reached armclk or not. */
+        cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+        /* update the actual armclk we achieved. */
+        cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+        s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+                     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+        if (hdiv > 4)
+                goto invalid;
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+        if ((hclk / pdiv) > cfg->max.pclk)
+                pdiv++;
+
+        cfg->freq.pclk = hclk / pdiv;
+
+        s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+        if (pdiv > 2)
+                goto invalid;
+
+        pdiv *= hdiv;
+
+        /* store the result, and then return */
+
+        cfg->divs.h_divisor = hdiv * armdiv;
+        cfg->divs.p_divisor = pdiv * armdiv;
+
+        return 0;
+
+ invalid:
+        return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long clkdiv;
+        unsigned long olddiv;
+
+        olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+        /* clear off current clock info */
+
+        clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+        clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+        clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+        if (cfg->divs.arm_divisor == 2)
+                clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+        clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+        s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+        clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        unsigned long refresh;
+
+        s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+                     board->refresh, cfg->freq.hclk);
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * by 10 each to ensure that we do not overflow 32 bit numbers. This
+         * should work for HCLK up to 133MHz and refresh period up to 30usec.
+         */
+
+        refresh = (board->refresh / 10);
+        refresh *= (cfg->freq.hclk / 100);
+        refresh /= (1 * 1000 * 1000);   /* 10^6 */
+
+        s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+        __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+        .max            = {
+                .fclk   = 200000000,
+                .hclk   = 100000000,
+                .pclk   =  50000000,
+        },
+
+        .latency        = 5000000, /* 5ms */
+
+        .locktime_m     = 150,
+        .locktime_u     = 150,
+        .locktime_bits  = 16,
+
+        .name           = "s3c2412",
+        .set_refresh    = s3c2412_cpufreq_setrefresh,
+        .set_divs       = s3c2412_cpufreq_setdivs,
+        .calc_divs      = s3c2412_cpufreq_calcdivs,
+
+        .calc_iotiming  = s3c2412_iotiming_calc,
+        .set_iotiming   = s3c2412_iotiming_set,
+        .get_iotiming   = s3c2412_iotiming_get,
+
+        .resume_clocks  = s3c2412_setup_clocks,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+        unsigned long fclk_rate;
+
+        hclk = clk_get(NULL, "hclk");
+        if (IS_ERR(hclk)) {
+                printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+                return -ENOENT;
+        }
+
+        fclk = clk_get(NULL, "fclk");
+        if (IS_ERR(fclk)) {
+                printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+                goto err_fclk;
+        }
+
+        fclk_rate = clk_get_rate(fclk);
+        if (fclk_rate > 200000000) {
+                printk(KERN_INFO
+                       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+                       __func__, fclk_rate / 1000000);
+                s3c2412_cpufreq_info.max.fclk = 266000000;
+                s3c2412_cpufreq_info.max.hclk = 133000000;
+                s3c2412_cpufreq_info.max.pclk =  66000000;
+        }
+
+        armclk = clk_get(NULL, "armclk");
+        if (IS_ERR(armclk)) {
+                printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+                goto err_armclk;
+        }
+
+        xtal = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal)) {
+                printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+                goto err_xtal;
+        }
+
+        return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+        clk_put(armclk);
+err_armclk:
+        clk_put(fclk);
+err_fclk:
+        clk_put(hclk);
+
+        return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+        .add            = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2412_sysclass,
+                                      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3f..bef39f77729d 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
         IODESC_ENT(CLKPWR),
         IODESC_ENT(TIMER),
         IODESC_ENT(WATCHDOG),
+        {
+                .virtual = (unsigned long)S3C2412_VA_SSMC,
+                .pfn     = __phys_to_pfn(S3C2412_PA_SSMC),
+                .length  = SZ_1M,
+                .type    = MT_DEVICE,
+        },
+        {
+                .virtual = (unsigned long)S3C2412_VA_EBI,
+                .pfn     = __phys_to_pfn(S3C2412_PA_EBI),
+                .length  = SZ_1M,
+                .type    = MT_DEVICE,
+        },
 };
 
 /* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec37306..8ae1b288f7fa 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
         select PM_SIMTEC if PM
         select HAVE_PATA_PLATFORM
         select S3C24XX_GPIO_EXTRA64
+        select S3C2440_XTAL_12000000
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@ config MACH_OSIRIS
         select S3C24XX_DCLK
         select PM_SIMTEC if PM
         select S3C24XX_GPIO_EXTRA128
+        select S3C2440_XTAL_12000000
+        select S3C2410_IOTIMING if S3C2440_CPUFREQ
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@ config MACH_OSIRIS
 config MACH_RX3715
         bool "HP iPAQ rx3715"
         select CPU_S3C2440
+        select S3C2440_XTAL_16934400
         select PM_H1940 if PM
         help
           Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@ config MACH_RX3715
 config ARCH_S3C2440
         bool "SMDK2440"
         select CPU_S3C2440
+        select S3C2440_XTAL_16934400
         select MACH_SMDK
         select S3C_DEV_USB_HOST
         help
@@ -67,6 +72,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
         bool "NexVision NEXCODER 2440 Light Board"
         select CPU_S3C2440
+        select S3C2440_XTAL_12000000
         select S3C_DEV_USB_HOST
         help
           Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@ config SMDK2440_CPU2440
         bool "SMDK2440 with S3C2440 CPU module"
         depends on ARCH_S3C2440
         default y if ARCH_S3C2440
+        select S3C2440_XTAL_16934400
         select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a64..2105a41281a4 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
         &s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+        .refresh        = 7800, /* refresh period is 7.8usec */
+        .auto_io        = 1,
+        .need_io        = 1,
+};
+
 static void __init osiris_map_io(void)
 {
         unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
         s3c_i2c0_set_platdata(NULL);
 
+        s3c_cpufreq_setboard(&osiris_cpufreq);
+
         i2c_register_board_info(0, osiris_i2c_devs,
                                 ARRAY_SIZE(osiris_i2c_devs));
 
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e34..79e4d93ea2b6 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART             S3C24A0_PA_UART
 #define S3C_PA_IIC              S3C24A0_PA_IIC
+#define S3C_PA_NAND             S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d35..fc8b223bad4f 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,18 +38,21 @@
 #define S3C_VA_UART2            S3C_VA_UARTx(2)
 #define S3C_VA_UART3            S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND         (0x70200000)
 #define S3C64XX_PA_FB           (0x77100000)
 #define S3C64XX_PA_USB_HSOTG    (0x7C000000)
 #define S3C64XX_PA_WATCHDOG     (0x7E004000)
 #define S3C64XX_PA_SYSCON       (0x7E00F000)
+#define S3C64XX_PA_AC97         (0x7F001000)
 #define S3C64XX_PA_IIS0         (0x7F002000)
 #define S3C64XX_PA_IIS1         (0x7F003000)
 #define S3C64XX_PA_TIMER        (0x7F006000)
 #define S3C64XX_PA_IIC0         (0x7F004000)
+#define S3C64XX_PA_IISV4        (0x7F00D000)
 #define S3C64XX_PA_IIC1         (0x7F00F000)
 
 #define S3C64XX_PA_GPIO         (0x7F008000)
-#define S3C64XX_VA_GPIO         S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO         S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO         SZ_4K
 
 #define S3C64XX_PA_SDRAM        (0x50000000)
@@ -57,7 +60,7 @@
 #define S3C64XX_PA_VIC1         (0x71300000)
 
 #define S3C64XX_PA_MODEM        (0x74108000)
-#define S3C64XX_VA_MODEM        S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM        S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST      (0x74300000)
 
@@ -72,6 +75,7 @@
 #define S3C_PA_HSMMC2           S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC              S3C64XX_PA_IIC0
 #define S3C_PA_IIC1             S3C64XX_PA_IIC1
+#define S3C_PA_NAND             S3C64XX_PA_NAND
 #define S3C_PA_FB               S3C64XX_PA_FB
 #define S3C_PA_USBHOST          S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG        S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90bb..b42bdd0f2138 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
         /* the i2c devices are directly compatible with s3c2440 */
         s3c_i2c0_setname("s3c2440-i2c");
+
+        s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5a..f9d0f09f9761 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
         select S3C64XX_SETUP_I2C1
         help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+        bool "Airgoo HMT"
+        select CPU_S3C6410
+        select S3C_DEV_FB
+        select S3C_DEV_USB_HOST
+        select S3C64XX_SETUP_FB_24BPP
+        select HAVE_PWM
+        help
+          Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac88612..3e48c3dbf973 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)      += mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)     += mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)          += mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)          += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de8895..9b67c663d9d8 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
         /* the i2c devices are directly compatible with s3c2440 */
         s3c_i2c0_setname("s3c2440-i2c");
         s3c_i2c1_setname("s3c2440-i2c");
+
+        s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 000000000000..c5741056193f
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+        int ret;
+
+        ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+        if (!ret)
+                ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+        return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+        /*
+         * translate from CIELUV/CIELAB L*->brightness, E.G. from
+         * perceived luminance to light output. Assumes range 0..25600
+         */
+        if (brightness < 0x800) {
+                /* Y = Yn * L / 903.3 */
+                brightness = (100*256 * brightness + 231245/2) / 231245;
+        } else {
+                /* Y = Yn * ((L + 16) / 116 )^3 */
+                int t = (brightness*4 + 16*1024 + 58)/116;
+                brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+        }
+
+        gpio_set_value(S3C64XX_GPB(4), brightness);
+
+        return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+        gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+        .pwm_id         = 1,
+        .max_brightness = 100 * 256,
+        .dft_brightness = 40 * 256,
+        .pwm_period_ns  = 1000000000 / (100 * 256 * 20),
+        .init           = hmt_bl_init,
+        .notify         = hmt_bl_notify,
+        .exit           = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+        .name           = "pwm-backlight",
+        .dev            = {
+                .parent = &s3c_device_timer[1].dev,
+                .platform_data = &hmt_backlight_data,
+        },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+        .win_mode       = {
+                .pixclock       = 41094,
+                .left_margin    = 8,
+                .right_margin   = 13,
+                .upper_margin   = 7,
+                .lower_margin   = 5,
+                .hsync_len      = 3,
+                .vsync_len      = 1,
+                .xres           = 800,
+                .yres           = 480,
+        },
+        .max_bpp        = 32,
+        .default_bpp    = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+        .setup_gpio     = s3c64xx_fb_gpio_setup_24bpp,
+        .win[0]         = &hmt_fb_win0,
+        .vidcon0        = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+        .vidcon1        = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+        [0] = {
+                .name   = "uboot",
+                .size   = SZ_512K,
+                .offset = 0,
+        },
+        [1] = {
+                .name   = "uboot-env1",
+                .size   = SZ_256K,
+                .offset = SZ_512K,
+        },
+        [2] = {
+                .name   = "uboot-env2",
+                .size   = SZ_256K,
+                .offset = SZ_512K + SZ_256K,
+        },
+        [3] = {
+                .name   = "kernel",
+                .size   = SZ_2M,
+                .offset = SZ_1M,
+        },
+        [4] = {
+                .name   = "rootfs",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = SZ_1M + SZ_2M,
+        },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+        [0] = {
+                .name           = "nand",
+                .nr_chips       = 1,
+                .nr_partitions  = ARRAY_SIZE(hmt_nand_part),
+                .partitions     = hmt_nand_part,
+        },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+        .tacls          = 25,
+        .twrph0         = 55,
+        .twrph1         = 40,
+        .nr_sets        = ARRAY_SIZE(hmt_nand_sets),
+        .sets           = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+        { /* left function keys */
+                .name                   = "left:blue",
+                .gpio                   = S3C64XX_GPO(12),
+                .default_trigger        = "default-on",
+        },
+        { /* right function keys - red */
+                .name                   = "right:red",
+                .gpio                   = S3C64XX_GPO(13),
+        },
+        { /* right function keys - green */
+                .name                   = "right:green",
+                .gpio                   = S3C64XX_GPO(14),
+        },
+        { /* right function keys - blue */
+                .name                   = "right:blue",
+                .gpio                   = S3C64XX_GPO(15),
+                .default_trigger        = "default-on",
+        },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+        .num_leds = ARRAY_SIZE(hmt_leds),
+        .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+        .name                   = "leds-gpio",
+        .id                     = -1,
+        .dev.platform_data      = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+        &s3c_device_i2c0,
+        &s3c_device_nand,
+        &s3c_device_fb,
+        &s3c_device_usb,
+        &s3c_device_timer[1],
+        &hmt_backlight_device,
+        &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+        s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+        s3c_i2c0_set_platdata(NULL);
+        s3c_fb_set_platdata(&hmt_lcd_pdata);
+        s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+        gpio_request(S3C64XX_GPC(7), "usb power");
+        gpio_direction_output(S3C64XX_GPC(7), 0);
+        gpio_request(S3C64XX_GPM(0), "usb power");
+        gpio_direction_output(S3C64XX_GPM(0), 1);
+        gpio_request(S3C64XX_GPK(7), "usb power");
+        gpio_direction_output(S3C64XX_GPK(7), 1);
+        gpio_request(S3C64XX_GPF(13), "usb power");
+        gpio_direction_output(S3C64XX_GPF(13), 1);
+
+        platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+        /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+        .phys_io        = S3C_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S3C64XX_PA_SDRAM + 0x100,
+        .init_irq       = s3c6410_init_irq,
+        .map_io         = hmt_map_io,
+        .init_machine   = hmt_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f8548..55e9bbfaf68b 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
         &s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567f..ea51dbe76e3e 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
         [0] = {
                 .hwport      = 0,
                 .flags       = 0,
-                .ucon        = 0x3c5,
-                .ulcon       = 0x03,
-                .ufcon       = 0x51,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
         },
         [1] = {
                 .hwport      = 1,
                 .flags       = 0,
-                .ucon        = 0x3c5,
-                .ulcon       = 0x03,
-                .ufcon       = 0x51,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
+        },
+        [3] = {
+                .hwport      = 3,
+                .flags       = 0,
+                .ucon        = UCON,
+                .ulcon       = ULCON,
+                .ufcon       = UFCON,
         },
 };
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 000000000000..b1a4ba504416
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#       Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+        bool
+        select CPU_S5PC100_INIT
+        select CPU_S5PC100_CLOCK
+        help
+          Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+        bool "SMDKC100"
+        select CPU_S5PC100
+        select S5PC1XX_SETUP_I2C1
+        help
+          Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 000000000000..afc89b381d7a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           :=
+obj-                            :=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)       += cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)     += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 000000000000..ff90aa13bd67
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y   := 0x20008000
+params_phys-y   := 0x20000100
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 000000000000..0e718890da32
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+        iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+        /* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+        printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+        s3c24xx_register_baseclocks(xtal);
+        s5pc1xx_register_clocks();
+        s5pc100_register_clocks();
+        s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+        u32 vic_valid[] = {~0, ~0, ~0};
+
+        /* VIC0, VIC1, and VIC2 are fully populated. */
+        s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+        .name   = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+        .cls    = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+        return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+        printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+        return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9d142ccf654b
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+        /* note, for the boot process to work we have to keep the UART
+         * virtual address aligned to an 1MiB boundary for the L1
+         * mapping the head code makes. We keep the UART virtual address
+         * aligned and add in the offset when we load the value here.
+         */
+
+        .macro addruart, rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1
+                ldreq   \rx, = S3C_PA_UART
+                ldrne   \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+                add     \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+        .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 000000000000..67131939e626
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =S3C_VA_VIC0
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+        @ check the vic0
+        mov     \irqnr, # S3C_IRQ_OFFSET + 31
+        ldr     \irqstat, [ \base, # VIC_IRQ_STATUS ]
+        teq     \irqstat, #0
+
+        @ otherwise try vic1
+        addeq   \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+        addeq   \irqnr, \irqnr, #32
+        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+        teqeq   \irqstat, #0
+
+        @ otherwise try vic2
+        addeq   \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+        addeq   \irqnr, \irqnr, #32
+        ldreq   \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+        teqeq   \irqstat, #0
+
+        clzne   \irqstat, \irqstat
+        subne   \irqnr, \irqnr, \irqstat
+        .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 000000000000..ad28d8ec8a78
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 000000000000..c74fc93d7d15
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR      (8)
+#define S5PC1XX_GPIO_A1_NR      (5)
+#define S5PC1XX_GPIO_B_NR       (8)
+#define S5PC1XX_GPIO_C_NR       (5)
+#define S5PC1XX_GPIO_D_NR       (7)
+#define S5PC1XX_GPIO_E0_NR      (8)
+#define S5PC1XX_GPIO_E1_NR      (6)
+#define S5PC1XX_GPIO_F0_NR      (8)
+#define S5PC1XX_GPIO_F1_NR      (8)
+#define S5PC1XX_GPIO_F2_NR      (8)
+#define S5PC1XX_GPIO_F3_NR      (4)
+#define S5PC1XX_GPIO_G0_NR      (8)
+#define S5PC1XX_GPIO_G1_NR      (3)
+#define S5PC1XX_GPIO_G2_NR      (7)
+#define S5PC1XX_GPIO_G3_NR      (7)
+#define S5PC1XX_GPIO_H0_NR      (8)
+#define S5PC1XX_GPIO_H1_NR      (8)
+#define S5PC1XX_GPIO_H2_NR      (8)
+#define S5PC1XX_GPIO_H3_NR      (8)
+#define S5PC1XX_GPIO_I_NR       (8)
+#define S5PC1XX_GPIO_J0_NR      (8)
+#define S5PC1XX_GPIO_J1_NR      (5)
+#define S5PC1XX_GPIO_J2_NR      (8)
+#define S5PC1XX_GPIO_J3_NR      (8)
+#define S5PC1XX_GPIO_J4_NR      (4)
+#define S5PC1XX_GPIO_K0_NR      (8)
+#define S5PC1XX_GPIO_K1_NR      (6)
+#define S5PC1XX_GPIO_K2_NR      (8)
+#define S5PC1XX_GPIO_K3_NR      (8)
+#define S5PC1XX_GPIO_MP00_NR    (8)
+#define S5PC1XX_GPIO_MP01_NR    (8)
+#define S5PC1XX_GPIO_MP02_NR    (8)
+#define S5PC1XX_GPIO_MP03_NR    (8)
+#define S5PC1XX_GPIO_MP04_NR    (5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+        ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+        S5PC1XX_GPIO_A0_START   = 0,
+        S5PC1XX_GPIO_A1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+        S5PC1XX_GPIO_B_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+        S5PC1XX_GPIO_C_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+        S5PC1XX_GPIO_D_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+        S5PC1XX_GPIO_E0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+        S5PC1XX_GPIO_E1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+        S5PC1XX_GPIO_F0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+        S5PC1XX_GPIO_F1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+        S5PC1XX_GPIO_F2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+        S5PC1XX_GPIO_F3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+        S5PC1XX_GPIO_G0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+        S5PC1XX_GPIO_G1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+        S5PC1XX_GPIO_G2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+        S5PC1XX_GPIO_G3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+        S5PC1XX_GPIO_H0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+        S5PC1XX_GPIO_H1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+        S5PC1XX_GPIO_H2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+        S5PC1XX_GPIO_H3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+        S5PC1XX_GPIO_I_START    = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+        S5PC1XX_GPIO_J0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+        S5PC1XX_GPIO_J1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+        S5PC1XX_GPIO_J2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+        S5PC1XX_GPIO_J3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+        S5PC1XX_GPIO_J4_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+        S5PC1XX_GPIO_K0_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+        S5PC1XX_GPIO_K1_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+        S5PC1XX_GPIO_K2_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+        S5PC1XX_GPIO_K3_START   = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+        S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+        S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+        S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+        S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+        S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)       (S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)       (S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)        (S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)        (S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)        (S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)       (S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)       (S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)       (S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)       (S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)       (S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)       (S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)       (S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)       (S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)       (S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)       (S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)       (S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)       (S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)       (S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)       (S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)        (S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)       (S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)       (S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)       (S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)       (S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)       (S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)       (S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)       (S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)       (S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)       (S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)       (S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)       (S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)       (S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)       (S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)       (S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END        (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END            S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS   (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 000000000000..6b38618c2fd9
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 000000000000..622720dba289
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 000000000000..9e9f39130b2c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID       (0xE0000000)
+#define S5PC1XX_PA_CHIPID       S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID       S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS          (0xE0100000)
+#define S5PC100_PA_CLK          (S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR          (S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK          S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR          S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK          (S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR          (S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC          (0xE4000000)
+#define S5PC100_VA_VIC          S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET   0x100000
+#define S5PC100_VA_VIC_OFFSET   0x10000
+#define S5PC1XX_PA_VIC(x)       (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)       (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER        (0xEA000000)
+#define S5PC1XX_PA_TIMER        S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER        S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART         (0xEC000000)
+#define S5PC1XX_PA_UART         S5PC100_PA_UART
+#define S5PC1XX_VA_UART         S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC          (0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM        (0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART             S5PC100_PA_UART
+#define S3C_PA_UART0            (S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1            (S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2            (S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3            (S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0            (S3C_VA_UART + 0x0)
+#define S3C_VA_UART1            (S3C_VA_UART + 0x400)
+#define S3C_VA_UART2            (S3C_VA_UART + 0x800)
+#define S3C_VA_UART3            (S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET         0x400
+#define S3C_VA_VIC0             (S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1             (S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2             (S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC              S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 000000000000..4b60d18179f7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET             UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 000000000000..b34d2f7aae52
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+        return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+        return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+        return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+        return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 000000000000..751ac15438c8
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)                      ((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)                      ((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)                      ((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 000000000000..e39014375470
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+        /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+        /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 000000000000..d3de0f3591ae
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+        u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+        return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX        (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 000000000000..01ccf535e76c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+        /* we do not need to do any cpu detection here at the moment. */
+        fifo_mask = S3C2440_UFSTAT_TXMASK;
+        fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 000000000000..214093cd7632
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+        [0] = {
+                .hwport      = 0,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [1] = {
+                .hwport      = 1,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [2] = {
+                .hwport      = 2,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+        [3] = {
+                .hwport      = 3,
+                .flags       = 0,
+                .ucon        = 0x3c5,
+                .ulcon       = 0x03,
+                .ufcon       = 0x51,
+        },
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+        s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+        s3c24xx_init_clocks(12000000);
+        s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+        platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+        /* Maintainer: Byungho Min <bhmin@samsung.com> */
+        .phys_io        = S5PC1XX_PA_UART & 0xfff00000,
+        .io_pg_offst    = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+        .boot_params    = S5PC100_PA_SDRAM + 0x100,
+
+        .init_irq       = s5pc100_init_irq,
+        .map_io         = smdkc100_map_io,
+        .init_machine   = smdkc100_machine_init,
+        .timer          = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 89b3ccf35e1b..7936085dd758 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
         for (i = 0; i < NR_IRQS; i++)
                 set_bit(i, (unsigned long *) &mask[0]);
         u300_enable_intcon_clock();
-        vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
-        vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+        vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+        vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index afc0f87f3fa4..975eae41ee66 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -343,8 +343,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
         {
-                I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-                .type = "ds1338",
+                I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
         },
 };
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ceb..5fe595aeba69 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
         bool "Enable the L2x0 outer cache controller"
         depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-                   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+                   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
         default y
         select OUTER_CACHE
         help
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b9..b270d6228fe2 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
 
 #define __get8_unaligned_check(ins,val,addr,err)        \
         __asm__(                                        \
-        "1:     "ins"   %1, [%2], #1\n"                 \
+ ARM(   "1:     "ins"   %1, [%2], #1\n" )               \
+ THUMB( "1:     "ins"   %1, [%2]\n"     )               \
+ THUMB( "       add     %2, %2, #1\n"   )               \
         "2:\n"                                          \
         "       .section .fixup,\"ax\"\n"               \
         "       .align  2\n"                            \
@@ -215,7 +217,9 @@ union offset_union {
         do {                                                    \
                 unsigned int err = 0, v = val, a = addr;        \
                 __asm__( FIRST_BYTE_16                          \
-                "1:     "ins"   %1, [%2], #1\n"                 \
+         ARM(   "1:     "ins"   %1, [%2], #1\n" )               \
+         THUMB( "1:     "ins"   %1, [%2]\n"     )               \
+         THUMB( "       add     %2, %2, #1\n"   )               \
                 "       mov     %1, %1, "NEXT_BYTE"\n"          \
                 "2:     "ins"   %1, [%2]\n"                     \
                 "3:\n"                                          \
@@ -245,11 +249,17 @@ union offset_union {
         do {                                                    \
                 unsigned int err = 0, v = val, a = addr;        \
                 __asm__( FIRST_BYTE_32                          \
-                "1:     "ins"   %1, [%2], #1\n"                 \
+         ARM(   "1:     "ins"   %1, [%2], #1\n" )               \
+         THUMB( "1:     "ins"   %1, [%2]\n"     )               \
+         THUMB( "       add     %2, %2, #1\n"   )               \
                 "       mov     %1, %1, "NEXT_BYTE"\n"          \
-                "2:     "ins"   %1, [%2], #1\n"                 \
+         ARM(   "2:     "ins"   %1, [%2], #1\n" )               \
+         THUMB( "2:     "ins"   %1, [%2]\n"     )               \
+         THUMB( "       add     %2, %2, #1\n"   )               \
                 "       mov     %1, %1, "NEXT_BYTE"\n"          \
-                "3:     "ins"   %1, [%2], #1\n"                 \
+         ARM(   "3:     "ins"   %1, [%2], #1\n" )               \
+         THUMB( "3:     "ins"   %1, [%2]\n"     )               \
+         THUMB( "       add     %2, %2, #1\n"   )               \
                 "       mov     %1, %1, "NEXT_BYTE"\n"          \
                 "4:     "ins"   %1, [%2]\n"                     \
                 "5:\n"                                          \
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98d..bda0ec31a4e2 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
  *
  *      Flush the whole D-cache.
  *
- *      Corrupted registers: r0-r5, r7, r9-r11
+ *      Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
  *
  *      - mm    - mm_struct describing address space
  */
@@ -51,8 +51,12 @@ loop1:
 loop2:
         mov     r9, r4                          @ create working copy of max way size
 loop3:
-        orr     r11, r10, r9, lsl r5            @ factor way and cache number into r11
-        orr     r11, r11, r7, lsl r2            @ factor index number into r11
+ ARM(   orr     r11, r10, r9, lsl r5    )       @ factor way and cache number into r11
+ THUMB( lsl     r6, r9, r5              )
+ THUMB( orr     r11, r10, r6            )       @ factor way and cache number into r11
+ ARM(   orr     r11, r11, r7, lsl r2    )       @ factor index number into r11
+ THUMB( lsl     r6, r7, r2              )
+ THUMB( orr     r11, r11, r6            )       @ factor index number into r11
         mcr     p15, 0, r11, c7, c14, 2         @ clean & invalidate by set/way
         subs    r9, r9, #1                      @ decrement the way
         bge     loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
-        stmfd   sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(   stmfd   sp!, {r4-r5, r7, r9-r11, lr}    )
+ THUMB( stmfd   sp!, {r4-r7, r9-r11, lr}        )
         bl      v7_flush_dcache_all
         mov     r0, #0
         mcr     p15, 0, r0, c7, c5, 0           @ I+BTB cache invalidate
-        ldmfd   sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(   ldmfd   sp!, {r4-r5, r7, r9-r11, lr}    )
+ THUMB( ldmfd   sp!, {r4-r7, r9-r11, lr}        )
         mov     pc, lr
 ENDPROC(v7_flush_kern_cache_all)
 
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac8..b30925fcbcdc 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
 #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
 #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
 
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+        u64 mask = ISA_DMA_THRESHOLD;
+
+        if (dev) {
+                mask = dev->coherent_dma_mask;
+
+                /*
+                 * Sanity check the DMA mask - it must be non-zero, and
+                 * must be able to be satisfied by a DMA allocation.
+                 */
+                if (mask == 0) {
+                        dev_warn(dev, "coherent DMA mask is unset\n");
+                        return 0;
+                }
+
+                if ((~mask) & ISA_DMA_THRESHOLD) {
+                        dev_warn(dev, "coherent DMA mask %#llx is smaller "
+                                 "than system GFP_DMA mask %#llx\n",
+                                 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+                        return 0;
+                }
+        }
 
+        return mask;
+}
+
+#ifdef CONFIG_MMU
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
         struct page *page;
         struct arm_vm_region *c;
         unsigned long order;
-        u64 mask = ISA_DMA_THRESHOLD, limit;
+        u64 mask = get_coherent_dma_mask(dev);
+        u64 limit;
 
         if (!consistent_pte[0]) {
                 printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
                 return NULL;
         }
 
-        if (dev) {
-                mask = dev->coherent_dma_mask;
-
-                /*
-                 * Sanity check the DMA mask - it must be non-zero, and
-                 * must be able to be satisfied by a DMA allocation.
-                 */
-                if (mask == 0) {
-                        dev_warn(dev, "coherent DMA mask is unset\n");
-                        goto no_page;
-                }
-
-                if ((~mask) & ISA_DMA_THRESHOLD) {
-                        dev_warn(dev, "coherent DMA mask %#llx is smaller "
-                                 "than system GFP_DMA mask %#llx\n",
-                                 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-                        goto no_page;
-                }
-        }
+        if (!mask)
+                goto no_page;
 
         /*
          * Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
         *handle = ~0;
         return NULL;
 }
+#else   /* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+            pgprot_t prot)
+{
+        void *virt;
+        u64 mask = get_coherent_dma_mask(dev);
+
+        if (!mask)
+                goto error;
+
+        if (mask != 0xffffffff)
+                gfp |= GFP_DMA;
+        virt = kmalloc(size, gfp);
+        if (!virt)
+                goto error;
+
+        *handle =  virt_to_dma(dev, virt);
+        return virt;
+
+error:
+        *handle = ~0;
+        return NULL;
+}
+#endif  /* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
 static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
                     void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
+        int ret = -ENXIO;
+#ifdef CONFIG_MMU
         unsigned long flags, user_size, kern_size;
         struct arm_vm_region *c;
-        int ret = -ENXIO;
 
         user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
                                               vma->vm_page_prot);
                 }
         }
+#endif  /* CONFIG_MMU */
 
         return ret;
 }
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
+#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
         struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
                __func__, cpu_addr);
         dump_stack();
 }
+#else   /* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+        if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+                return;
+        kfree(cpu_addr);
+}
+#endif  /* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
  */
 static int __init consistent_init(void)
 {
+        int ret = 0;
+#ifdef CONFIG_MMU
         pgd_t *pgd;
         pmd_t *pmd;
         pte_t *pte;
-        int ret = 0, i = 0;
+        int i = 0;
         u32 base = CONSISTENT_BASE;
 
         do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
                 consistent_pte[i++] = pte;
                 base += (1 << PGDIR_SHIFT);
         } while (base < CONSISTENT_END);
+#endif  /* !CONFIG_MMU */
 
         return ret;
 }
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 5fa8dea5a371..cc8829d7e116 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 #include <linux/highmem.h>
 
 #include <asm/system.h>
@@ -24,6 +25,7 @@
 
 #include "fault.h"
 
+#ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -98,6 +100,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
         printk("\n");
 }
+#else                                   /* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif                                  /* CONFIG_MMU */
 
 /*
  * Oops.  The kernel tried to access some page that wasn't present.
@@ -172,6 +178,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
                 __do_kernel_fault(mm, addr, fsr, regs);
 }
 
+#ifdef CONFIG_MMU
 #define VM_FAULT_BADMAP         0x010000
 #define VM_FAULT_BADACCESS      0x020000
 
@@ -323,6 +330,13 @@ no_context:
         __do_kernel_fault(mm, addr, fsr, regs);
         return 0;
 }
+#else                                   /* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+        return 0;
+}
+#endif                                  /* CONFIG_MMU */
 
 /*
  * First Level Translation Fault Handler
@@ -341,6 +355,7 @@ no_context:
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
+#ifdef CONFIG_MMU
 static int __kprobes
 do_translation_fault(unsigned long addr, unsigned int fsr,
                      struct pt_regs *regs)
@@ -379,6 +394,14 @@ bad_area:
         do_bad_area(addr, fsr, regs);
         return 0;
 }
+#else                                   /* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+                     struct pt_regs *regs)
+{
+        return 0;
+}
+#endif                                  /* CONFIG_MMU */
 
 /*
  * Some section permission faults need to be handled gracefully.
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b2..900811cc9130 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index a0b3f36f3178..7d63beaf9745 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,6 +77,7 @@
  * Sanity check the PTE configuration for the code below - which makes
  * certain assumptions about how these bits are layed out.
  */
+#ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
@@ -84,6 +85,7 @@
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
+#endif  /* CONFIG_MMU */
 
 /*
  * The ARMv6 and ARMv7 set_pte_ext translation function.
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a03..f3fa1c32fe92 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-        str     r1, [r0], #-2048                @ linux version
+ ARM(   str     r1, [r0], #-2048        )       @ linux version
+ THUMB( str     r1, [r0]                )       @ linux version
+ THUMB( sub     r0, r0, #2048           )
 
         bic     r3, r1, #0x000003f0
         bic     r3, r3, #PTE_TYPE_MASK
@@ -232,7 +234,6 @@ __v7_setup:
         mcr     p15, 0, r4, c2, c0, 1           @ load TTB1
         mov     r10, #0x1f                      @ domains 0, 1 = manager
         mcr     p15, 0, r10, c3, c0, 0          @ load domain access register
-#endif
         /*
          * Memory region attributes with SCTLR.TRE=1
          *
@@ -265,6 +266,7 @@ __v7_setup:
         ldr     r6, =0x40e040e0                 @ NMRR
         mcr     p15, 0, r5, c10, c2, 0          @ write PRRR
         mcr     p15, 0, r6, c10, c2, 1          @ write NMRR
+#endif
         adr     r5, v7_crval
         ldmia   r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
@@ -273,6 +275,7 @@ __v7_setup:
         mrc     p15, 0, r0, c1, c0, 0           @ read control register
         bic     r0, r0, r5                      @ clear bits them
         orr     r0, r0, r6                      @ set them
+ THUMB( orr     r0, r0, #1 << 30        )       @ Thumb exceptions
         mov     pc, lr                          @ return to head.S:__ret
 ENDPROC(__v7_setup)
 
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b7412235..ca5c7c226341 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
 config ARCH_MX1
         bool "MX1-based"
         select CPU_ARM920T
+        select COMMON_CLKDEV
         help
           This enables support for systems based on the Freescale i.MX1 family
 
@@ -19,6 +20,13 @@ config ARCH_MX2
         help
           This enables support for systems based on the Freescale i.MX2 family
 
+config ARCH_MX25
+        bool "MX25-based"
+        select CPU_ARM926T
+        select COMMON_CLKDEV
+        help
+          This enables support for systems based on the Freescale i.MX25 family
+
 config ARCH_MX3
         bool "MX3-based"
         select CPU_V6
@@ -26,11 +34,20 @@ config ARCH_MX3
         help
           This enables support for systems based on the Freescale i.MX3 family
 
+config ARCH_MXC91231
+        bool "MXC91231-based"
+        select CPU_V6
+        select COMMON_CLKDEV
+        help
+          This enables support for systems based on the Freescale MXC91231 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4f..9e8fbd57495c 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -47,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-        struct clk *p, *clk = ERR_PTR(-ENOENT);
-        int idno;
-        const char *str;
-
-        if (id == NULL)
-                return clk;
-
-        if (dev == NULL || dev->bus != &platform_bus_type)
-                idno = -1;
-        else
-                idno = to_platform_device(dev)->id;
-
-        mutex_lock(&clocks_mutex);
-
-        list_for_each_entry(p, &clocks, node) {
-                if (p->id == idno &&
-                    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-                        clk = p;
-                        goto found;
-                }
-        }
-
-        str = strrchr(id, '.');
-        if (str) {
-                int cnt = str - id;
-                str++;
-                idno = simple_strtol(str, NULL, 10);
-                list_for_each_entry(p, &clocks, node) {
-                        if (p->id == idno &&
-                            strlen(p->name) == cnt &&
-                            strncmp(id, p->name, cnt) == 0 &&
-                            try_module_get(p->owner)) {
-                                clk = p;
-                                goto found;
-                        }
-                }
-        }
-
-        list_for_each_entry(p, &clocks, node) {
-                if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-                        clk = p;
-                        goto found;
-                }
-        }
-
-        printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
-        mutex_unlock(&clocks_mutex);
-
-        return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 static void __clk_disable(struct clk *clk)
 {
         if (clk == NULL || IS_ERR(clk))
@@ -193,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
-        if (clk && !IS_ERR(clk))
-                module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
  * This is dependent on the clock's current parent.
@@ -265,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return -EINVAL;
-
-        mutex_lock(&clocks_mutex);
-        list_add(&clk->node, &clocks);
-        mutex_unlock(&clocks_mutex);
-
-        return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
-        if (clk == NULL || IS_ERR(clk))
-                return;
-
-        mutex_lock(&clocks_mutex);
-        list_del(&clk->node);
-        mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
-                                int count, int *eof, void *data)
-{
-        struct clk *clkp;
-        char *p = page;
-        int len;
-
-        list_for_each_entry(clkp, &clocks, node) {
-                p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
-                                clk_get_rate(clkp), clkp->usecount);
-                if (clkp->parent)
-                        p += sprintf(p, ", %s-%d\n", clkp->parent->name,
-                                     clkp->parent->id);
-                else
-                        p += sprintf(p, "\n");
-        }
-
-        len = (p - page) - off;
-        if (len < 0)
-                len = 0;
-
-        *eof = (len <= count) ? 1 : 0;
-        *start = page + off;
-
-        return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
-        struct proc_dir_entry *res;
-
-        res = create_proc_read_entry("cpu/clocks", 0, NULL,
-                                     mxc_clock_read_proc, NULL);
-        if (!res) {
-                printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
-                return -ENOMEM;
-        }
-        return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
@@ -363,12 +210,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 
         mfn_abs = mfn;
 
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
-        if (mfn >= 0x200) {
-                mfn |= 0xFFFFFE00;
-                mfn_abs = -mfn;
-        }
-#endif
+        /* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+         * 2's complements number
+         */
+        if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+                mfn_abs = 0x400 - mfn;
 
         freq *= 2;
         freq /= pd + 1;
@@ -376,8 +222,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
         ll = (unsigned long long)freq * mfn_abs;
 
         do_div(ll, mfd + 1);
-        if (mfn < 0)
+
+        if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
                 ll = -ll;
+
         ll = (freq * mfi) + ll;
 
         return ll;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4b..cfc4a8b43e6a 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
 static struct mxc_gpio_port *mxc_gpio_ports;
 static int gpio_table_size;
 
+#define cpu_is_mx1_mx2()        (cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR         (cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR       (cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR        (cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1       (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2       (cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR        (cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR        (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR        (cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV        (cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV       (cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE      (cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE      (cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE           0x4
+
 /* Note: This driver assumes 32 GPIOs are handled in one register */
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
@@ -162,7 +179,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
         }
 }
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 /* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -174,9 +190,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
         mxc_gpio_irq_handler(port, irq_stat);
 }
-#endif
 
-#ifdef CONFIG_ARCH_MX2
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -195,7 +209,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
                         mxc_gpio_irq_handler(&port[i], irq_stat);
         }
 }
-#endif
 
 static struct irq_chip gpio_irq_chip = {
         .ack = gpio_ack_irq,
@@ -284,17 +297,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
                 /* its a serious configuration bug when it fails */
                 BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-                /* setup one handler for each entry */
-                set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
-                set_irq_data(port[i].irq, &port[i]);
-#endif
+                if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
+                        /* setup one handler for each entry */
+                        set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+                        set_irq_data(port[i].irq, &port[i]);
+                }
+        }
+
+        if (cpu_is_mx2()) {
+                /* setup one handler for all GPIO interrupts */
+                set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+                set_irq_data(port[0].irq, port);
         }
 
-#ifdef CONFIG_ARCH_MX2
-        /* setup one handler for all GPIO interrupts */
-        set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-        set_irq_data(port[0].irq, port);
-#endif
         return 0;
 }
diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e559..0376c133c9f4 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 000000000000..a1fd5830af48
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c42..0cf4fa29510c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -15,12 +15,6 @@
 #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 
 /*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
  * Memory-mapped I/O on MX21ADS base board
  */
 #define MX21ADS_MMIO_BASE_ADDR   0xF5000000
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f8..7776d230327f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -26,12 +26,6 @@
                                 MXC_MAX_VIRTUAL_INTS)
 
 /*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
-/*
  * @name Memory Size parameters
  */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea2443..ea87551d2736 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d8..fec1bcfa9164 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f65..2cbfa35e82ff 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
 
 #define MXC_MAX_EXP_IO_LINES    16
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4d..eb5a5024622e 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f26..8e64325d6905 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a21..d5be6b5a6acf 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28b..2bbd6ed17f50 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* Definitions for components on the Debug board */
 
 /* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9d..383f1c04df06 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a2..13411709b13a 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e092..410f9786ed22 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       (AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abcd..1ac4e1682e5c 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
 #define __ASM_ARCH_MXC_BOARD_PCM043_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d2..6d88c7af4b23 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* NOR FLASH */
 #define QONG_NOR_SIZE           (128*1024*1024)
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db3..286cb9b0a25b 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,33 @@ struct clk;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
+extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc91231_map_io(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cfb..15b2b148a105 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,52 @@
  *
  */
 
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR      UART1_BASE_ADDR
+#define UART_VADDR      IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
+#include <mach/mx25.h>
+#define UART_PADDR      UART1_BASE_ADDR
+#define UART_VADDR      MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
+#include <mach/mx2x.h>
+#define UART_PADDR      UART1_BASE_ADDR
+#define UART_VADDR      AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx3x.h>
+#define UART_PADDR      UART1_BASE_ADDR
+#define UART_VADDR      AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mxc91231.h>
+#define UART_PADDR      MXC91231_UART2_BASE_ADDR
+#define UART_VADDR      MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
                 .macro  addruart,rx
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
-                ldreq   \rx, =MXC_LL_UART_PADDR @ physical
-                ldrne   \rx, =MXC_LL_UART_VADDR @ virtual
+                ldreq   \rx, =UART_PADDR        @ physical
+                ldrne   \rx, =UART_VADDR        @ virtual
                 .endm
 
                 .macro  senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da845..7cf290efe768 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+        ldr     \base, =avic_base
+        ldr     \base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
         ldr     r4, [\base, #AVIC_NIMASK]
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1f..78db75475f69 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,14 @@
 # include <mach/mx1.h>
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec1..5263506b7ddf 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
  * This structure describes the machine which we are running on.
  */
 
+#include <linux/fb.h>
+
 #define PCR_TFT         (1 << 31)
 #define PCR_COLOR       (1 << 30)
 #define PCR_PBSIZ_1     (0 << 28)
@@ -13,7 +15,8 @@
 #define PCR_BPIX_4      (2 << 25)
 #define PCR_BPIX_8      (3 << 25)
 #define PCR_BPIX_12     (4 << 25)
-#define PCR_BPIX_16     (4 << 25)
+#define PCR_BPIX_16     (5 << 25)
+#define PCR_BPIX_18     (6 << 25)
 #define PCR_PIXPOL      (1 << 24)
 #define PCR_FLMPOL      (1 << 23)
 #define PCR_LPPOL       (1 << 22)
@@ -46,29 +49,21 @@
 #define DMACR_HM(x)     (((x) & 0xf) << 16)
 #define DMACR_TM(x)     ((x) & 0xf)
 
-struct imx_fb_platform_data {
-        u_long          pixclock;
-
-        u_short         xres;
-        u_short         yres;
-
-        u_int           nonstd;
-        u_char          bpp;
-        u_char          hsync_len;
-        u_char          left_margin;
-        u_char          right_margin;
+struct imx_fb_videomode {
+        struct fb_videomode mode;
+        u32 pcr;
+        unsigned char   bpp;
+};
 
-        u_char          vsync_len;
-        u_char          upper_margin;
-        u_char          lower_margin;
-        u_char          sync;
+struct imx_fb_platform_data {
+        struct imx_fb_videomode *mode;
+        int             num_modes;
 
         u_int           cmap_greyscale:1,
                         cmap_inverse:1,
                         cmap_static:1,
                         unused:29;
 
-        u_int           pcr;
         u_int           pwmr;
         u_int           lscr1;
         u_int           dmacr;
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 000000000000..810c47f56e77
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10               IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0          IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13               IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1          IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14               IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0          IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15               IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1          IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16               IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2          IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17               IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3          IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18               IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4          IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL           IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19               IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER         IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5          IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20               IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6          IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2        IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21               IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7          IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3        IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22               IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8          IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23               IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9          IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24               IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10         IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK        IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25               IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11         IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS           IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0               IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD          IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12         IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1               IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD          IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13         IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE                 IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC           IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14          IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0               IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2          IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1               IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3          IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4               IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS         IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20         IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5               IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS         IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21         IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0         IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22      IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB               IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX     IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23         IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA               IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX     IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24         IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK             IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4         IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW                 IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS          IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25          IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B         IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26      IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B         IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27      IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE           IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28       IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE           IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29       IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B         IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30      IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB             IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31        IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15               IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16              IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5          IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14               IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17              IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6          IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13               IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18              IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7          IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12               IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8          IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11               IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9          IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10               IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10         IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC         IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9                 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11          IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR          IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8                 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12          IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC           IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7                 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13          IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6                 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14          IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5                 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15          IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4                 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16          IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3                 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17          IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2                 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18          IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1                 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19          IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0                 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20          IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0               IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0            IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15         IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1               IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1            IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16         IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2               IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17         IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3               IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18         IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4               IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19         IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5               IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19         IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6               IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20         IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7               IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21         IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8               IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR        IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9               IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL           IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10             IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER        IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11             IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2       IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12             IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3       IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13             IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2       IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14             IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3       IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15             IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK       IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC           IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22       IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC           IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23       IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK           IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24       IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD         IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25      IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST     IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS      IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM               IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26         IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC          IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2         IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX  IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27      IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3         IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28      IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4         IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS      IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29      IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5         IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30      IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6         IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31      IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7         IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6       IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8         IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7       IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9         IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21      IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK     IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8     IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC   IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9    IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC   IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10   IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11  IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK     IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12    IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT     IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13    IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14  IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15  IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0   IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16   IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1   IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17   IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18  IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY   IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22   IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD   IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22   IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD   IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23   IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS   IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0      IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24   IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS   IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1      IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25   IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD   IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26   IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD   IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27   IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS   IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL     IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28   IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER   IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS   IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29   IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD       IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2    IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23     IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK       IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3    IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24     IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0   IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25   IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1   IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD    IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26   IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2   IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK  IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27   IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3   IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS     IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28   IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0     IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29    IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1     IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30    IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2     IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0       IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31    IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3     IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1      IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0     IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0     IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1     IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1     IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2     IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2     IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3     IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3     IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4     IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC       IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD      IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5      IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO     IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD     IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6     IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7   IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS  IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8   IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN   IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9    IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10  IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11  IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV   IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX     IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12   IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13  IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK             IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE            IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14        IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B             IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20        IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO               IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A         IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX        IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR     IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B         IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX        IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC      IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C         IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX        IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D         IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX        IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E         IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD       IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F         IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC       IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15  IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ   IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS   IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17   IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK   IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18   IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD   IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19  IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO             IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21        IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30  IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31  IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC       IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC        IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG       IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC        IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI        IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM       IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR        IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM        IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP        IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1      IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD        IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART       IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC        IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI        IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1      IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE        IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1      IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD        IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 27f8d1b2bc6b..446f86763816 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA           IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA     IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL      IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA    IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL   IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4         IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5         IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6         IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
@@ -633,6 +635,19 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USB_OC__GPIO1_30       IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA      IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL      IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -667,6 +682,18 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0       IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1       IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28         IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0       IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0         IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1          IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2          IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3        IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8      IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9      IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10      IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11     IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 000000000000..9f13061192c8
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define IOMUX_OCONFIG_GPIO (0 << 4)     /* used as GPIO */
+#define IOMUX_OCONFIG_FUNC (1 << 4)     /* used as function */
+#define IOMUX_OCONFIG_ALT1 (2 << 4)     /* used as alternate function 1 */
+#define IOMUX_OCONFIG_ALT2 (3 << 4)     /* used as alternate function 2 */
+#define IOMUX_OCONFIG_ALT3 (4 << 4)     /* used as alternate function 3 */
+#define IOMUX_OCONFIG_ALT4 (5 << 4)     /* used as alternate function 4 */
+#define IOMUX_OCONFIG_ALT5 (6 << 4)     /* used as alternate function 5 */
+#define IOMUX_OCONFIG_ALT6 (7 << 4)     /* used as alternate function 6 */
+#define IOMUX_ICONFIG_NONE  0           /* not configured for input */
+#define IOMUX_ICONFIG_GPIO  1           /* used as GPIO */
+#define IOMUX_ICONFIG_FUNC  2           /* used as function */
+#define IOMUX_ICONFIG_ALT1  4           /* used as alternate function 1 */
+#define IOMUX_ICONFIG_ALT2  8           /* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ *      - reserves the pin so that it is not claimed by another driver
+ *      - setups the iomux according to the configuration
+ *      - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+                const char *label);
+
+/*
+ * releases a single pin:
+ *      - make it available for a future use by another driver
+ *      - frees the GPIO if the pin was configured as GPIO
+ *      - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP             (0)
+#define MUX_SIDE_SP             (1)
+
+#define MUX_SIDE_SHIFT          (26)
+#define MUX_SIDE_MASK           (0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT     (23)
+#define MUX_GPIO_PORT_MASK      (0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT      (20)
+#define MUX_GPIO_PIN_MASK       (0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT           (15)
+#define MUX_REG_MASK            (0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT         (13)
+#define MUX_FIELD_MASK          (0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT        (8)
+#define MUX_PADGRP_MASK         (0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK            (0xffffff << 8)
+
+#define GPIO_PORT_MAX           (3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+        (((side) << MUX_SIDE_SHIFT) |             \
+         (gport << MUX_GPIO_PORT_SHIFT) |               \
+         ((gpin) << MUX_GPIO_PIN_SHIFT) |               \
+         ((ctlreg) << MUX_REG_SHIFT) |          \
+         ((ctlfield) << MUX_FIELD_SHIFT) |              \
+         ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT      (4)
+#define MUX_MODE_IN_SHIFT       (0)
+#define MUX_MODE_SHIFT          (0)
+#define MUX_MODE_MASK           (0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+        (pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+        /* AP Side pins */
+        MXC91231_PIN_AP_CLE             = IOMUX_PIN(0, 0,  0,  0, 0, 24),
+        MXC91231_PIN_AP_ALE             = IOMUX_PIN(0, 0,  1,  0, 1, 24),
+        MXC91231_PIN_AP_CE_B            = IOMUX_PIN(0, 0,  2,  0, 2, 24),
+        MXC91231_PIN_AP_RE_B            = IOMUX_PIN(0, 0,  3,  0, 3, 24),
+        MXC91231_PIN_AP_WE_B            = IOMUX_PIN(0, 0,  4,  1, 0, 24),
+        MXC91231_PIN_AP_WP_B            = IOMUX_PIN(0, 0,  5,  1, 1, 24),
+        MXC91231_PIN_AP_BSY_B           = IOMUX_PIN(0, 0,  6,  1, 2, 24),
+        MXC91231_PIN_AP_U1_TXD          = IOMUX_PIN(0, 0,  7,  1, 3, 28),
+        MXC91231_PIN_AP_U1_RXD          = IOMUX_PIN(0, 0,  8,  2, 0, 28),
+        MXC91231_PIN_AP_U1_RTS_B        = IOMUX_PIN(0, 0,  9,  2, 1, 28),
+        MXC91231_PIN_AP_U1_CTS_B        = IOMUX_PIN(0, 0, 10,  2, 2, 28),
+        MXC91231_PIN_AP_AD1_TXD         = IOMUX_PIN(0, 0, 11,  2, 3,  9),
+        MXC91231_PIN_AP_AD1_RXD         = IOMUX_PIN(0, 0, 12,  3, 0,  9),
+        MXC91231_PIN_AP_AD1_TXC         = IOMUX_PIN(0, 0, 13,  3, 1,  9),
+        MXC91231_PIN_AP_AD1_TXFS        = IOMUX_PIN(0, 0, 14,  3, 2,  9),
+        MXC91231_PIN_AP_AD2_TXD         = IOMUX_PIN(0, 0, 15,  3, 3,  9),
+        MXC91231_PIN_AP_AD2_RXD         = IOMUX_PIN(0, 0, 16,  4, 0,  9),
+        MXC91231_PIN_AP_AD2_TXC         = IOMUX_PIN(0, 0, 17,  4, 1,  9),
+        MXC91231_PIN_AP_AD2_TXFS        = IOMUX_PIN(0, 0, 18,  4, 2,  9),
+        MXC91231_PIN_AP_OWDAT           = IOMUX_PIN(0, 0, 19,  4, 3, 28),
+        MXC91231_PIN_AP_IPU_LD17        = IOMUX_PIN(0, 0, 20,  5, 0, 28),
+        MXC91231_PIN_AP_IPU_D3_VSYNC    = IOMUX_PIN(0, 0, 21,  5, 1, 28),
+        MXC91231_PIN_AP_IPU_D3_HSYNC    = IOMUX_PIN(0, 0, 22,  5, 2, 28),
+        MXC91231_PIN_AP_IPU_D3_CLK      = IOMUX_PIN(0, 0, 23,  5, 3, 28),
+        MXC91231_PIN_AP_IPU_D3_DRDY     = IOMUX_PIN(0, 0, 24,  6, 0, 28),
+        MXC91231_PIN_AP_IPU_D3_CONTR    = IOMUX_PIN(0, 0, 25,  6, 1, 28),
+        MXC91231_PIN_AP_IPU_D0_CS       = IOMUX_PIN(0, 0, 26,  6, 2, 28),
+        MXC91231_PIN_AP_IPU_LD16        = IOMUX_PIN(0, 0, 27,  6, 3, 28),
+        MXC91231_PIN_AP_IPU_D2_CS       = IOMUX_PIN(0, 0, 28,  7, 0, 28),
+        MXC91231_PIN_AP_IPU_PAR_RS      = IOMUX_PIN(0, 0, 29,  7, 1, 28),
+        MXC91231_PIN_AP_IPU_D3_PS       = IOMUX_PIN(0, 0, 30,  7, 2, 28),
+        MXC91231_PIN_AP_IPU_D3_CLS      = IOMUX_PIN(0, 0, 31,  7, 3, 28),
+        MXC91231_PIN_AP_IPU_RD          = IOMUX_PIN(0, 1,  0,  8, 0, 28),
+        MXC91231_PIN_AP_IPU_WR          = IOMUX_PIN(0, 1,  1,  8, 1, 28),
+        MXC91231_PIN_AP_IPU_LD0         = IOMUX_PIN(0, 7,  0,  8, 2, 28),
+        MXC91231_PIN_AP_IPU_LD1         = IOMUX_PIN(0, 7,  0,  8, 3, 28),
+        MXC91231_PIN_AP_IPU_LD2         = IOMUX_PIN(0, 7,  0,  9, 0, 28),
+        MXC91231_PIN_AP_IPU_LD3         = IOMUX_PIN(0, 1,  2,  9, 1, 28),
+        MXC91231_PIN_AP_IPU_LD4         = IOMUX_PIN(0, 1,  3,  9, 2, 28),
+        MXC91231_PIN_AP_IPU_LD5         = IOMUX_PIN(0, 1,  4,  9, 3, 28),
+        MXC91231_PIN_AP_IPU_LD6         = IOMUX_PIN(0, 1,  5, 10, 0, 28),
+        MXC91231_PIN_AP_IPU_LD7         = IOMUX_PIN(0, 1,  6, 10, 1, 28),
+        MXC91231_PIN_AP_IPU_LD8         = IOMUX_PIN(0, 1,  7, 10, 2, 28),
+        MXC91231_PIN_AP_IPU_LD9         = IOMUX_PIN(0, 1,  8, 10, 3, 28),
+        MXC91231_PIN_AP_IPU_LD10        = IOMUX_PIN(0, 1,  9, 11, 0, 28),
+        MXC91231_PIN_AP_IPU_LD11        = IOMUX_PIN(0, 1, 10, 11, 1, 28),
+        MXC91231_PIN_AP_IPU_LD12        = IOMUX_PIN(0, 1, 11, 11, 2, 28),
+        MXC91231_PIN_AP_IPU_LD13        = IOMUX_PIN(0, 1, 12, 11, 3, 28),
+        MXC91231_PIN_AP_IPU_LD14        = IOMUX_PIN(0, 1, 13, 12, 0, 28),
+        MXC91231_PIN_AP_IPU_LD15        = IOMUX_PIN(0, 1, 14, 12, 1, 28),
+        MXC91231_PIN_AP_KPROW4          = IOMUX_PIN(0, 7,  0, 12, 2, 10),
+        MXC91231_PIN_AP_KPROW5          = IOMUX_PIN(0, 1, 16, 12, 3, 10),
+        MXC91231_PIN_AP_GPIO_AP_B17     = IOMUX_PIN(0, 1, 17, 13, 0, 10),
+        MXC91231_PIN_AP_GPIO_AP_B18     = IOMUX_PIN(0, 1, 18, 13, 1, 10),
+        MXC91231_PIN_AP_KPCOL3          = IOMUX_PIN(0, 1, 19, 13, 2, 11),
+        MXC91231_PIN_AP_KPCOL4          = IOMUX_PIN(0, 1, 20, 13, 3, 11),
+        MXC91231_PIN_AP_KPCOL5          = IOMUX_PIN(0, 1, 21, 14, 0, 11),
+        MXC91231_PIN_AP_GPIO_AP_B22     = IOMUX_PIN(0, 1, 22, 14, 1, 11),
+        MXC91231_PIN_AP_GPIO_AP_B23     = IOMUX_PIN(0, 1, 23, 14, 2, 11),
+        MXC91231_PIN_AP_CSI_D0          = IOMUX_PIN(0, 1, 24, 14, 3, 21),
+        MXC91231_PIN_AP_CSI_D1          = IOMUX_PIN(0, 1, 25, 15, 0, 21),
+        MXC91231_PIN_AP_CSI_D2          = IOMUX_PIN(0, 1, 26, 15, 1, 21),
+        MXC91231_PIN_AP_CSI_D3          = IOMUX_PIN(0, 1, 27, 15, 2, 21),
+        MXC91231_PIN_AP_CSI_D4          = IOMUX_PIN(0, 1, 28, 15, 3, 21),
+        MXC91231_PIN_AP_CSI_D5          = IOMUX_PIN(0, 1, 29, 16, 0, 21),
+        MXC91231_PIN_AP_CSI_D6          = IOMUX_PIN(0, 1, 30, 16, 1, 21),
+        MXC91231_PIN_AP_CSI_D7          = IOMUX_PIN(0, 1, 31, 16, 2, 21),
+        MXC91231_PIN_AP_CSI_D8          = IOMUX_PIN(0, 2,  0, 16, 3, 21),
+        MXC91231_PIN_AP_CSI_D9          = IOMUX_PIN(0, 2,  1, 17, 0, 21),
+        MXC91231_PIN_AP_CSI_MCLK        = IOMUX_PIN(0, 2,  2, 17, 1, 21),
+        MXC91231_PIN_AP_CSI_VSYNC       = IOMUX_PIN(0, 2,  3, 17, 2, 21),
+        MXC91231_PIN_AP_CSI_HSYNC       = IOMUX_PIN(0, 2,  4, 17, 3, 21),
+        MXC91231_PIN_AP_CSI_PIXCLK      = IOMUX_PIN(0, 2,  5, 18, 0, 21),
+        MXC91231_PIN_AP_I2CLK           = IOMUX_PIN(0, 2,  6, 18, 1, 12),
+        MXC91231_PIN_AP_I2DAT           = IOMUX_PIN(0, 2,  7, 18, 2, 12),
+        MXC91231_PIN_AP_GPIO_AP_C8      = IOMUX_PIN(0, 2,  8, 18, 3,  9),
+        MXC91231_PIN_AP_GPIO_AP_C9      = IOMUX_PIN(0, 2,  9, 19, 0,  9),
+        MXC91231_PIN_AP_GPIO_AP_C10     = IOMUX_PIN(0, 2, 10, 19, 1,  9),
+        MXC91231_PIN_AP_GPIO_AP_C11     = IOMUX_PIN(0, 2, 11, 19, 2,  9),
+        MXC91231_PIN_AP_GPIO_AP_C12     = IOMUX_PIN(0, 2, 12, 19, 3,  9),
+        MXC91231_PIN_AP_GPIO_AP_C13     = IOMUX_PIN(0, 2, 13, 20, 0, 28),
+        MXC91231_PIN_AP_GPIO_AP_C14     = IOMUX_PIN(0, 2, 14, 20, 1, 28),
+        MXC91231_PIN_AP_GPIO_AP_C15     = IOMUX_PIN(0, 2, 15, 20, 2,  9),
+        MXC91231_PIN_AP_GPIO_AP_C16     = IOMUX_PIN(0, 2, 16, 20, 3,  9),
+        MXC91231_PIN_AP_GPIO_AP_C17     = IOMUX_PIN(0, 2, 17, 21, 0,  9),
+        MXC91231_PIN_AP_ED_INT0         = IOMUX_PIN(0, 2, 18, 21, 1, 22),
+        MXC91231_PIN_AP_ED_INT1         = IOMUX_PIN(0, 2, 19, 21, 2, 22),
+        MXC91231_PIN_AP_ED_INT2         = IOMUX_PIN(0, 2, 20, 21, 3, 22),
+        MXC91231_PIN_AP_ED_INT3         = IOMUX_PIN(0, 2, 21, 22, 0, 22),
+        MXC91231_PIN_AP_ED_INT4         = IOMUX_PIN(0, 2, 22, 22, 1, 23),
+        MXC91231_PIN_AP_ED_INT5         = IOMUX_PIN(0, 2, 23, 22, 2, 23),
+        MXC91231_PIN_AP_ED_INT6         = IOMUX_PIN(0, 2, 24, 22, 3, 23),
+        MXC91231_PIN_AP_ED_INT7         = IOMUX_PIN(0, 2, 25, 23, 0, 23),
+        MXC91231_PIN_AP_U2_DSR_B        = IOMUX_PIN(0, 2, 26, 23, 1, 28),
+        MXC91231_PIN_AP_U2_RI_B         = IOMUX_PIN(0, 2, 27, 23, 2, 28),
+        MXC91231_PIN_AP_U2_CTS_B        = IOMUX_PIN(0, 2, 28, 23, 3, 28),
+        MXC91231_PIN_AP_U2_DTR_B        = IOMUX_PIN(0, 2, 29, 24, 0, 28),
+        MXC91231_PIN_AP_KPROW0          = IOMUX_PIN(0, 7,  0, 24, 1, 10),
+        MXC91231_PIN_AP_KPROW1          = IOMUX_PIN(0, 1, 15, 24, 2, 10),
+        MXC91231_PIN_AP_KPROW2          = IOMUX_PIN(0, 7,  0, 24, 3, 10),
+        MXC91231_PIN_AP_KPROW3          = IOMUX_PIN(0, 7,  0, 25, 0, 10),
+        MXC91231_PIN_AP_KPCOL0          = IOMUX_PIN(0, 7,  0, 25, 1, 11),
+        MXC91231_PIN_AP_KPCOL1          = IOMUX_PIN(0, 7,  0, 25, 2, 11),
+        MXC91231_PIN_AP_KPCOL2          = IOMUX_PIN(0, 7,  0, 25, 3, 11),
+
+        /* Shared pins */
+        MXC91231_PIN_SP_U3_TXD          = IOMUX_PIN(1, 3,  0,  0, 0, 28),
+        MXC91231_PIN_SP_U3_RXD          = IOMUX_PIN(1, 3,  1,  0, 1, 28),
+        MXC91231_PIN_SP_U3_RTS_B        = IOMUX_PIN(1, 3,  2,  0, 2, 28),
+        MXC91231_PIN_SP_U3_CTS_B        = IOMUX_PIN(1, 3,  3,  0, 3, 28),
+        MXC91231_PIN_SP_USB_TXOE_B      = IOMUX_PIN(1, 3,  4,  1, 0, 28),
+        MXC91231_PIN_SP_USB_DAT_VP      = IOMUX_PIN(1, 3,  5,  1, 1, 28),
+        MXC91231_PIN_SP_USB_SE0_VM      = IOMUX_PIN(1, 3,  6,  1, 2, 28),
+        MXC91231_PIN_SP_USB_RXD         = IOMUX_PIN(1, 3,  7,  1, 3, 28),
+        MXC91231_PIN_SP_UH2_TXOE_B      = IOMUX_PIN(1, 3,  8,  2, 0, 28),
+        MXC91231_PIN_SP_UH2_SPEED       = IOMUX_PIN(1, 3,  9,  2, 1, 28),
+        MXC91231_PIN_SP_UH2_SUSPEN      = IOMUX_PIN(1, 3, 10,  2, 2, 28),
+        MXC91231_PIN_SP_UH2_TXDP        = IOMUX_PIN(1, 3, 11,  2, 3, 28),
+        MXC91231_PIN_SP_UH2_RXDP        = IOMUX_PIN(1, 3, 12,  3, 0, 28),
+        MXC91231_PIN_SP_UH2_RXDM        = IOMUX_PIN(1, 3, 13,  3, 1, 28),
+        MXC91231_PIN_SP_UH2_OVR         = IOMUX_PIN(1, 3, 14,  3, 2, 28),
+        MXC91231_PIN_SP_UH2_PWR         = IOMUX_PIN(1, 3, 15,  3, 3, 28),
+        MXC91231_PIN_SP_SD1_DAT0        = IOMUX_PIN(1, 3, 16,  4, 0, 25),
+        MXC91231_PIN_SP_SD1_DAT1        = IOMUX_PIN(1, 3, 17,  4, 1, 25),
+        MXC91231_PIN_SP_SD1_DAT2        = IOMUX_PIN(1, 3, 18,  4, 2, 25),
+        MXC91231_PIN_SP_SD1_DAT3        = IOMUX_PIN(1, 3, 19,  4, 3, 25),
+        MXC91231_PIN_SP_SD1_CMD         = IOMUX_PIN(1, 3, 20,  5, 0, 25),
+        MXC91231_PIN_SP_SD1_CLK         = IOMUX_PIN(1, 3, 21,  5, 1, 25),
+        MXC91231_PIN_SP_SD2_DAT0        = IOMUX_PIN(1, 3, 22,  5, 2, 26),
+        MXC91231_PIN_SP_SD2_DAT1        = IOMUX_PIN(1, 3, 23,  5, 3, 26),
+        MXC91231_PIN_SP_SD2_DAT2        = IOMUX_PIN(1, 3, 24,  6, 0, 26),
+        MXC91231_PIN_SP_SD2_DAT3        = IOMUX_PIN(1, 3, 25,  6, 1, 26),
+        MXC91231_PIN_SP_GPIO_SP_A26     = IOMUX_PIN(1, 3, 26,  6, 2, 28),
+        MXC91231_PIN_SP_SPI1_CLK        = IOMUX_PIN(1, 3, 27,  6, 3, 13),
+        MXC91231_PIN_SP_SPI1_MOSI       = IOMUX_PIN(1, 3, 28,  7, 0, 13),
+        MXC91231_PIN_SP_SPI1_MISO       = IOMUX_PIN(1, 3, 29,  7, 1, 13),
+        MXC91231_PIN_SP_SPI1_SS0        = IOMUX_PIN(1, 3, 30,  7, 2, 13),
+        MXC91231_PIN_SP_SPI1_SS1        = IOMUX_PIN(1, 3, 31,  7, 3, 13),
+        MXC91231_PIN_SP_SD2_CMD         = IOMUX_PIN(1, 7,  0,  8, 0, 26),
+        MXC91231_PIN_SP_SD2_CLK         = IOMUX_PIN(1, 7,  0,  8, 1, 26),
+        MXC91231_PIN_SP_SIM1_RST_B      = IOMUX_PIN(1, 2, 30,  8, 2, 28),
+        MXC91231_PIN_SP_SIM1_SVEN       = IOMUX_PIN(1, 7,  0,  8, 3, 28),
+        MXC91231_PIN_SP_SIM1_CLK        = IOMUX_PIN(1, 7,  0,  9, 0, 28),
+        MXC91231_PIN_SP_SIM1_TRXD       = IOMUX_PIN(1, 7,  0,  9, 1, 28),
+        MXC91231_PIN_SP_SIM1_PD         = IOMUX_PIN(1, 2, 31,  9, 2, 28),
+        MXC91231_PIN_SP_UH2_TXDM        = IOMUX_PIN(1, 7,  0,  9, 3, 28),
+        MXC91231_PIN_SP_UH2_RXD         = IOMUX_PIN(1, 7,  0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX      (104)
+#define PIN_SP_MAX      (41)
+
+#define PIN_MAX         (PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+        IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+        IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+        IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+        IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658f..a0fa40265468 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
 /*
  * Use to set PAD control
  */
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V     0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V     1
 
-#define PAD_CTL_NO_HYSTERESIS           0
-#define PAD_CTL_HYSTERESIS              1
+#define PAD_CTL_DVS                     (1 << 13)
+#define PAD_CTL_HYS                     (1 << 8)
 
-#define PAD_CTL_PULL_DISABLED           0x0
-#define PAD_CTL_PULL_KEEPER             0xa
-#define PAD_CTL_PULL_DOWN_100K          0xc
-#define PAD_CTL_PULL_UP_47K             0xd
-#define PAD_CTL_PULL_UP_100K            0xe
-#define PAD_CTL_PULL_UP_22K             0xf
+#define PAD_CTL_PKE                     (1 << 7)
+#define PAD_CTL_PUE                     (1 << 6)
+#define PAD_CTL_PUS_100K_DOWN           (0 << 4)
+#define PAD_CTL_PUS_47K_UP              (1 << 4)
+#define PAD_CTL_PUS_100K_UP             (2 << 4)
+#define PAD_CTL_PUS_22K_UP              (3 << 4)
 
-#define PAD_CTL_OUTPUT_CMOS             0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN       1
+#define PAD_CTL_ODE                     (1 << 3)
 
-#define PAD_CTL_DRIVE_STRENGTH_NORM     0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH     1
-#define PAD_CTL_DRIVE_STRENGTH_MAX      2
+#define PAD_CTL_DSE_STANDARD            (0 << 1)
+#define PAD_CTL_DSE_HIGH                (1 << 1)
+#define PAD_CTL_DSE_MAX                 (2 << 1)
 
-#define PAD_CTL_SLEW_RATE_SLOW          0
-#define PAD_CTL_SLEW_RATE_FAST          1
+#define PAD_CTL_SRE_FAST                (1 << 0)
 
 /*
  * setups a single pad:
@@ -117,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
  */
 void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
 
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
 #endif /* __MACH_IOMUX_V3_H__*/
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc1109..6d49f8ae3259 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
 #ifdef CONFIG_ARCH_MX2
 # define GPIO_PORT_MAX  5
 #endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX  3
+#endif
 
 #ifndef GPIO_PORT_MAX
 # error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
 
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b88..ead9d592168d 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,10 @@
 #define MXC_GPIO_IRQS           (32 * 6)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS           (32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS           (32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS           (32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176ed..d3afafdcc0e5 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,10 @@
 #endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET             UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET             UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET             UL(0x90000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bcd..1b2890a5c452 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
 #ifndef __ASM_ARCH_MXC_MX1_H__
 #define __ASM_ARCH_MXC_MX1_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 #include <mach/vmalloc.h>
 
 /*
@@ -138,20 +134,6 @@
 #define GPIO_INT_PORTD          62
 #define WDT_INT                 63
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR                 0x1C
-#define GPIO_GDIR               0x00
-#define GPIO_PSR                0x24
-#define GPIO_ICR1               0x28
-#define GPIO_ICR2               0x2C
-#define GPIO_IMR                0x30
-#define GPIO_ISR                0x34
-#define GPIO_INT_LOW_LEV        0x3
-#define GPIO_INT_HIGH_LEV       0x2
-#define GPIO_INT_RISE_EDGE      0x0
-#define GPIO_INT_FALL_EDGE      0x1
-#define GPIO_INT_NONE           0x4
-
 /* DMA */
 #define DMA_REQ_UART3_T         2
 #define DMA_REQ_UART3_R         3
@@ -179,8 +161,4 @@
 #define DMA_REQ_UART1_T         30
 #define DMA_REQ_UART1_R         31
 
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /*  __ASM_ARCH_MXC_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a99..21112c695ec5 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
 /* Memory regions and CS */
 #define SDRAM_BASE_ADDR         0xC0000000
 #define CSD1_BASE_ADDR          0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 000000000000..ec64bd9a8ab1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR            0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT       0xFC000000
+#define MX25_AIPS1_SIZE                 SZ_1M
+#define MX25_AIPS2_BASE_ADDR            0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT       0xFC200000
+#define MX25_AIPS2_SIZE                 SZ_1M
+#define MX25_AVIC_BASE_ADDR             0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT        0xFC400000
+#define MX25_AVIC_SIZE                  SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR           (MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR              (MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR             (MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR             (MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x)  \
+        (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x)  \
+        (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x)  \
+        (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name)  ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x)                                      \
+        (void __force __iomem *)                                \
+        (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
+        __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :  \
+        __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :    \
+        0xDEADBEEF)
+
+#define UART1_BASE_ADDR                 0x43f90000
+#define UART2_BASE_ADDR                 0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7bb..dc3ad9aa952a 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00      /* internal ram */
 
@@ -120,7 +116,4 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS           (192 + 16)
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5b..db5d921e0fe6 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX2x_H__
 #define __ASM_ARCH_MXC_MX2x_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
@@ -154,20 +150,6 @@
 #define MXC_INT_GPIO            8
 #define MXC_INT_CSPI3           6
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR                 0x1C
-#define GPIO_GDIR               0x00
-#define GPIO_PSR                0x24
-#define GPIO_ICR1               0x28
-#define GPIO_ICR2               0x2C
-#define GPIO_IMR                0x30
-#define GPIO_ISR                0x34
-#define GPIO_INT_LOW_LEV        0x3
-#define GPIO_INT_HIGH_LEV       0x2
-#define GPIO_INT_RISE_EDGE      0x0
-#define GPIO_INT_FALL_EDGE      0x1
-#define GPIO_INT_NONE           0x4
-
 /* fixed DMA request numbers */
 #define DMA_REQ_CSI_RX          31
 #define DMA_REQ_CSI_STAT        30
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b6139..14ac0dcc82f4 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
 #define MX31_IRAM_BASE_ADDR             0x1FFC0000      /* internal ram */
 #define MX31_IRAM_SIZE                  SZ_16K
 
-#define OTG_BASE_ADDR           (AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR      (AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR           (AIPS1_BASE_ADDR + 0x0008C000)
 #define UART4_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR         (AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e3..ab4cfec6c8ab 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
 #define MX35_IRAM_SIZE          SZ_128K
 
 #define MXC_FEC_BASE_ADDR       0x50038000
+#define MX35_OTG_BASE_ADDR      0x53ff4000
 #define MX35_NFC_BASE_ADDR      0xBB000000
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb5769..009f4440276b 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
 #ifndef __ASM_ARCH_MXC_MX31_H__
 #define __ASM_ARCH_MXC_MX31_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /*
  * MX31 memory map:
  *
@@ -263,25 +259,8 @@
 #define SYSTEM_REV_MIN          CHIP_REV_1_0
 #define SYSTEM_REV_NUM          3
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR                 0x00
-#define GPIO_GDIR               0x04
-#define GPIO_PSR                0x08
-#define GPIO_ICR1               0x0C
-#define GPIO_ICR2               0x10
-#define GPIO_IMR                0x14
-#define GPIO_ISR                0x18
-#define GPIO_INT_LOW_LEV        0x0
-#define GPIO_INT_HIGH_LEV       0x1
-#define GPIO_INT_RISE_EDGE      0x2
-#define GPIO_INT_FALL_EDGE      0x3
-#define GPIO_INT_NONE           0x4
-
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS           96
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
 extern unsigned int system_rev;
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4eaf..51990536b845 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,9 +26,11 @@
 
 #define MXC_CPU_MX1             1
 #define MXC_CPU_MX21            21
+#define MXC_CPU_MX25            25
 #define MXC_CPU_MX27            27
 #define MXC_CPU_MX31            31
 #define MXC_CPU_MX35            35
+#define MXC_CPU_MXC91231        91231
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
@@ -58,6 +60,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()          (0)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25()          (mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25()          (0)
+#endif
+
 #ifdef CONFIG_MACH_MX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
@@ -94,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()          (0)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231()      (mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231()      (0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
-#define cpu_is_mx3()    (cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3()    (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
 #define cpu_is_mx2()    (cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 000000000000..81484d1ef232
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - Platform specific register memory map
+ *
+ *  Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR         0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT    0xF9000000
+#define MXC91231_L2CC_SIZE              SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR        0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT   0xFC000000
+#define MXC91231_AIPS1_SIZE             SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR   MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR          (MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR       (MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR       (MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR    (MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR    (MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR     (MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR          (MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR           (MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR        (MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR        (MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR          (MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR        (MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR         (MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR          (MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR     (MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR       (MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR        0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT   0xFC100000
+#define MXC91231_AIPS2_SIZE             SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR     (MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR          (MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR     (MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR       (MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR     (MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR     (MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR          (MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR        (MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR          (MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR     (MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR        (MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR         (MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR        0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT   0xFC200000
+#define MXC91231_SPBA0_SIZE             SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR    (MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR    (MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR        (MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR        (MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR         (MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR          (MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR          (MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR     (MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR  (MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR  (MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR        (MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR    (MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR    (MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR      (MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR       (MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR         (MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR         (MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR         (MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR     (MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR          (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR       (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR         (MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR        0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT   0xFC300000
+#define MXC91231_SPBA1_SIZE             SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR        (MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR         (MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1             0x04
+#define MXC91231_SPBA_SDHC2             0x08
+#define MXC91231_SPBA_UART3             0x0C
+#define MXC91231_SPBA_CSPI2             0x10
+#define MXC91231_SPBA_SSI2              0x14
+#define MXC91231_SPBA_SIM               0x18
+#define MXC91231_SPBA_IIM               0x1C
+#define MXC91231_SPBA_CTI_SDMA          0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS  0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS  0x28
+#define MXC91231_SPBA_CSPI1             0x30
+#define MXC91231_SPBA_MQSPI             0x34
+#define MXC91231_SPBA_EL1T              0x38
+#define MXC91231_SPBA_IOMUX             0x40
+#define MXC91231_SPBA_CRM_COM           0x44
+#define MXC91231_SPBA_CRM_AP            0x48
+#define MXC91231_SPBA_PLL0              0x4C
+#define MXC91231_SPBA_PLL1              0x50
+#define MXC91231_SPBA_PLL2              0x54
+#define MXC91231_SPBA_GPIO4             0x58
+#define MXC91231_SPBA_SAHARA            0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR         0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT    0xFC400000
+#define MXC91231_ROMP_SIZE              SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR         0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT    0xFC410000
+#define MXC91231_AVIC_SIZE              SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR       0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT  0xFC420000
+#define MXC91231_X_MEMC_SIZE            SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR          (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR       (MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR         (MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR         (MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR      (MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR       0x78000000
+#define MXC91231_FB_RAM_SIZE            SZ_256K
+#define MXC91231_CSD0_BASE_ADDR         0x80000000
+#define MXC91231_CSD1_BASE_ADDR         0x90000000
+#define MXC91231_CS0_BASE_ADDR          0xA0000000
+#define MXC91231_CS1_BASE_ADDR          0xA8000000
+#define MXC91231_CS2_BASE_ADDR          0xB0000000
+#define MXC91231_CS3_BASE_ADDR          0xB2000000
+#define MXC91231_CS4_BASE_ADDR          0xB4000000
+#define MXC91231_CS5_BASE_ADDR          0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+        (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+        ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+                                MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+        (void __iomem *) \
+        (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+         MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+         0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x)  \
+        (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x)  \
+        (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x)  \
+        (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x)  \
+        (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x)  \
+        (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x)  \
+        (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x)  \
+        (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
+        (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3              0
+#define MXC91231_INT_EL1T_CI            1
+#define MXC91231_INT_EL1T_RFCI          2
+#define MXC91231_INT_EL1T_RFI           3
+#define MXC91231_INT_EL1T_MCU           4
+#define MXC91231_INT_EL1T_IPI           5
+#define MXC91231_INT_MU_GEN             6
+#define MXC91231_INT_GPIO4              7
+#define MXC91231_INT_MMC_SDHC2          8
+#define MXC91231_INT_MMC_SDHC1          9
+#define MXC91231_INT_I2C                10
+#define MXC91231_INT_SSI2               11
+#define MXC91231_INT_SSI1               12
+#define MXC91231_INT_CSPI2              13
+#define MXC91231_INT_CSPI1              14
+#define MXC91231_INT_RTIC               15
+#define MXC91231_INT_SAHARA             15
+#define MXC91231_INT_HAC                15
+#define MXC91231_INT_UART3_RX           16
+#define MXC91231_INT_UART3_TX           17
+#define MXC91231_INT_UART3_MINT         18
+#define MXC91231_INT_ECT                19
+#define MXC91231_INT_SIM_IPB            20
+#define MXC91231_INT_SIM_DATA           21
+#define MXC91231_INT_RNGA               22
+#define MXC91231_INT_DSM_AP             23
+#define MXC91231_INT_KPP                24
+#define MXC91231_INT_RTC                25
+#define MXC91231_INT_PWM                26
+#define MXC91231_INT_GEMK_AP            27
+#define MXC91231_INT_EPIT               28
+#define MXC91231_INT_GPT                29
+#define MXC91231_INT_UART2_RX           30
+#define MXC91231_INT_UART2_TX           31
+#define MXC91231_INT_UART2_MINT         32
+#define MXC91231_INT_NANDFC             33
+#define MXC91231_INT_SDMA               34
+#define MXC91231_INT_USB_WAKEUP         35
+#define MXC91231_INT_USB_SOF            36
+#define MXC91231_INT_PMU_EVTMON         37
+#define MXC91231_INT_USB_FUNC           38
+#define MXC91231_INT_USB_DMA            39
+#define MXC91231_INT_USB_CTRL           40
+#define MXC91231_INT_IPU_ERR            41
+#define MXC91231_INT_IPU_SYN            42
+#define MXC91231_INT_UART1_RX           43
+#define MXC91231_INT_UART1_TX           44
+#define MXC91231_INT_UART1_MINT         45
+#define MXC91231_INT_IIM                46
+#define MXC91231_INT_MU_RX_OR           47
+#define MXC91231_INT_MU_TX_OR           48
+#define MXC91231_INT_SCC_SCM            49
+#define MXC91231_INT_SCC_SMN            50
+#define MXC91231_INT_GPIO2              51
+#define MXC91231_INT_GPIO1              52
+#define MXC91231_INT_MQSPI1             53
+#define MXC91231_INT_MQSPI2             54
+#define MXC91231_INT_WDOG2              55
+#define MXC91231_INT_EXT_INT7           56
+#define MXC91231_INT_EXT_INT6           57
+#define MXC91231_INT_EXT_INT5           58
+#define MXC91231_INT_EXT_INT4           59
+#define MXC91231_INT_EXT_INT3           60
+#define MXC91231_INT_EXT_INT2           61
+#define MXC91231_INT_EXT_INT1           62
+#define MXC91231_INT_EXT_INT0           63
+
+#define MXC91231_MAX_INT_LINES          63
+#define MXC91231_MAX_EXT_LINES          8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870e..ef00199568de 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+
 static inline void arch_idle(void)
 {
+#ifdef CONFIG_ARCH_MXC91231
+        if (cpu_is_mxc91231()) {
+                /* Need this to set DSM low-power mode */
+                mxc91231_prepare_idle();
+        }
+#endif
+
         cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2f..527a6c24788e 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,10 @@
 #define CLOCK_TICK_RATE         13300000
 #elif defined CONFIG_ARCH_MX3
 #define CLOCK_TICK_RATE         16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE         16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE         13000000
 #endif
 
 #endif                          /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe0365982..082a3908256b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
 #define __MXC_BOOT_UNCOMPRESS
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
 
 #define USR2 0x98
 #define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
 
 static void putc(int ch)
 {
-        static unsigned long serial_port = 0;
-
-        if (unlikely(serial_port == 0)) {
-                do {
-                        serial_port = UART1_BASE_ADDR;
-                        if (UART(UCR1) & UCR1_UARTEN)
-                                break;
-                        serial_port = UART2_BASE_ADDR;
-                        if (UART(UCR1) & UCR1_UARTEN)
-                                break;
-                        return;
-                } while (0);
-        }
+        if (!uart_base)
+                return;
+        if (!(UART(UCR1) & UCR1_UARTEN))
+                return;
 
         while (!(UART(USR2) & USR2_TXFE))
                 barrier();
@@ -68,11 +62,49 @@ static void putc(int ch)
 
 #define flush() do { } while (0)
 
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR     0x00206000
+#define MX25_UART1_BASE_ADDR    0x43f90000
+#define MX2X_UART1_BASE_ADDR    0x1000a000
+#define MX3X_UART1_BASE_ADDR    0x43F90000
+#define MX3X_UART2_BASE_ADDR    0x43F94000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+        switch (arch_id) {
+        case MACH_TYPE_MX1ADS:
+        case MACH_TYPE_SCB9328:
+                uart_base = MX1_UART1_BASE_ADDR;
+                break;
+        case MACH_TYPE_MX25_3DS:
+                uart_base = MX25_UART1_BASE_ADDR;
+                break;
+        case MACH_TYPE_IMX27LITE:
+        case MACH_TYPE_MX27_3DS:
+        case MACH_TYPE_MX27ADS:
+        case MACH_TYPE_PCM038:
+        case MACH_TYPE_MX21ADS:
+                uart_base = MX2X_UART1_BASE_ADDR;
+                break;
+        case MACH_TYPE_MX31LITE:
+        case MACH_TYPE_ARMADILLO5X0:
+        case MACH_TYPE_MX31MOBOARD:
+        case MACH_TYPE_QONG:
+        case MACH_TYPE_MX31_3DS:
+        case MACH_TYPE_PCM037:
+        case MACH_TYPE_MX31ADS:
+        case MACH_TYPE_MX35_3DS:
+        case MACH_TYPE_PCM043:
+                uart_base = MX3X_UART1_BASE_ADDR;
+                break;
+        case MACH_TYPE_MAGX_ZN5:
+                uart_base = MX3X_UART2_BASE_ADDR;
+                break;
+        default:
+                break;
+        }
+}
 
+#define arch_decomp_setup()     __arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
 
 #endif                          /* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513f..851ca99bf1b1 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 #include <mach/iomux-v3.h>
 
-#define IOMUX_BASE      IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
 
 static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
 
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
         if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
                 return -EBUSY;
         if (pad->mux_ctrl_ofs)
-                __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+                __raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
         if (pad->select_input_ofs)
                 __raw_writel(pad->select_input,
-                                IOMUX_BASE + pad->select_input_ofs);
+                                base + pad->select_input_ofs);
 
-        if (!(pad->pad_ctrl & NO_PAD_CTRL))
-                __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+        if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+                __raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
         return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
         }
 }
 EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+        base = iomux_v3_base;
+}
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8f..778ddfe57d89 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
 #define AVIC_FIPNDH             0x60    /* fast int pending high */
 #define AVIC_FIPNDL             0x64    /* fast int pending low */
 
-static void __iomem *avic_base;
+void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
 {
         int i;
 
-        avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+        avic_base = irqbase;
 
         /* put the AVIC into the reset value with
          * all interrupts disabled
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79dd..5cdbd605ac05 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
 
 
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
         if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
                 return -EINVAL;
 
-        if (cpu_is_mx27() || cpu_is_mx3()) {
+        if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
                 unsigned long long c;
                 unsigned long period_cycles, duty_cycles, prescale;
+                u32 cr;
+
                 c = clk_get_rate(pwm->clk);
                 c = c * period_ns;
                 do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
                 writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
                 writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-                writel(MX3_PWMCR_PRESCALER(prescale - 1) |
-                        MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
-                        pwm->mmio_base + MX3_PWMCR);
+
+                cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+                if (cpu_is_mx25())
+                        cr |= MX3_PWMCR_CLKSRC_IPG;
+                else
+                        cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+                writel(cr, pwm->mmio_base + MX3_PWMCR);
         } else if (cpu_is_mx1() || cpu_is_mx21()) {
                 /* The PWM subsystem allows for exact frequencies. However,
                  * I cannot connect a scope on my device to the PWM line and
@@ -118,6 +127,8 @@ EXPORT_SYMBOL(pwm_enable);
 
 void pwm_disable(struct pwm_device *pwm)
 {
+        writel(0, pwm->mmio_base + MX3_PWMCR);
+
         if (pwm->clk_enabled) {
                 clk_disable(pwm->clk);
                 pwm->clk_enabled = 0;
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c916..97f42799fa58 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,32 +27,38 @@
 #include <linux/delay.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG            IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE         (1 << 0)
-#else
-#define WDOG_WCR_REG            IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE         (1 << 2)
-#endif
+static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-        if (!cpu_is_mx1()) {
+        unsigned int wcr_enable;
+
+#ifdef CONFIG_ARCH_MXC91231
+        if (cpu_is_mxc91231()) {
+                mxc91231_arch_reset(mode, cmd);
+                return;
+        }
+#endif
+        if (cpu_is_mx1()) {
+                wcr_enable = (1 << 0);
+        } else {
                 struct clk *clk;
 
                 clk = clk_get_sys("imx-wdt.0", NULL);
                 if (!IS_ERR(clk))
                         clk_enable(clk);
+                wcr_enable = (1 << 2);
         }
 
         /* Assert SRS signal */
-        __raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+        __raw_writew(wcr_enable, wdog_base);
 
         /* wait for reset to assert... */
         mdelay(500);
@@ -65,3 +71,8 @@ void arch_reset(char mode, const char *cmd)
         /* we'll take a jump through zero as a poor second */
         cpu_reset(0);
 }
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+        wdog_base = base;
+}
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e029..844567ee35fe 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT          (1 << 1)
 #define MX2_TSTAT_COMP          (1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN         (1 << 3)
 #define MX3_TCTL_CLK_IPG        (1 << 6)
 #define MX3_TCTL_FRR            (1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
         unsigned int tmp;
 
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 __raw_writel(0, timer_base + MX3_IR);
         else {
                 tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 __raw_writel(1<<0, timer_base + MX3_IR);
         else {
                 __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
                 __raw_writel(0, timer_base + MX1_2_TSTAT);
         if (cpu_is_mx2())
                 __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 clocksource_mxc.read = mx3_get_cycles;
 
         clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
         if (mode != clockevent_mode) {
                 /* Set event time into far-far future */
-                if (cpu_is_mx3())
+                if (cpu_is_mx3() || cpu_is_mx25())
                         __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
                                         timer_base + MX3_TCMP);
                 else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
         struct clock_event_device *evt = &clockevent_mxc;
         uint32_t tstat;
 
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 tstat = __raw_readl(timer_base + MX3_TSTAT);
         else
                 tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 clockevent_mxc.set_next_event = mx3_set_next_event;
 
         clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
         return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
         uint32_t tctl_val;
-        int irq;
 
         clk_enable(timer_clk);
 
-        if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-                timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-                irq = TIM1_INT;
-#endif
-        } else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-                timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-                irq = MXC_INT_GPT1;
-#endif
-        } else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-                timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-                irq = MXC_INT_GPT;
-#endif
-        } else
-                BUG();
+        timer_base = base;
 
         /*
          * Initialise to a known state (all timers off, and timing reset)
@@ -313,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk)
         __raw_writel(0, timer_base + MXC_TCTL);
         __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-        if (cpu_is_mx3())
+        if (cpu_is_mx3() || cpu_is_mx25())
                 tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
         else
                 tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af64066..1868c0d8f9b5 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
         /* Ensure desired rate is within allowed range.  Some govenors
          * (ondemand) will just pass target_freq=0 to get the minimum. */
-        if (target_freq < policy->cpuinfo.min_freq)
-                target_freq = policy->cpuinfo.min_freq;
-        if (target_freq > policy->cpuinfo.max_freq)
-                target_freq = policy->cpuinfo.max_freq;
+        if (target_freq < policy->min)
+                target_freq = policy->min;
+        if (target_freq > policy->max)
+                target_freq = policy->max;
 
         freqs.old = omap_getspeed(0);
         freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c12423..00940dc6bb50 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT      0x0090
 #define OMAP24XX_GPIO_SETDATAOUT        0x0094
 
+#define OMAP4_GPIO_REVISION             0x0000
+#define OMAP4_GPIO_SYSCONFIG            0x0010
+#define OMAP4_GPIO_EOI                  0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0        0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1        0x0028
+#define OMAP4_GPIO_IRQSTATUS0           0x002c
+#define OMAP4_GPIO_IRQSTATUS1           0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0        0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1        0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0        0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1        0x0040
+#define OMAP4_GPIO_IRQWAKEN0            0x0044
+#define OMAP4_GPIO_IRQWAKEN1            0x0048
+#define OMAP4_GPIO_SYSSTATUS            0x0104
+#define OMAP4_GPIO_CTRL                 0x0130
+#define OMAP4_GPIO_OE                   0x0134
+#define OMAP4_GPIO_DATAIN               0x0138
+#define OMAP4_GPIO_DATAOUT              0x013c
+#define OMAP4_GPIO_LEVELDETECT0         0x0140
+#define OMAP4_GPIO_LEVELDETECT1         0x0144
+#define OMAP4_GPIO_RISINGDETECT         0x0148
+#define OMAP4_GPIO_FALLINGDETECT        0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE        0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME       0x0154
+#define OMAP4_GPIO_CLEARDATAOUT         0x0190
+#define OMAP4_GPIO_SETDATAOUT           0x0194
 /*
  * omap34xx specific GPIO registers
  */
@@ -386,12 +412,16 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
                 reg += OMAP850_GPIO_DIR_CONTROL;
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_OE;
                 break;
 #endif
+#if defined(CONFIG_ARCH_OMAP4)
+        case METHOD_GPIO_24XX:
+                reg += OMAP4_GPIO_OE;
+                break;
+#endif
         default:
                 WARN_ON(1);
                 return;
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                         l &= ~(1 << gpio);
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 if (enable)
                         reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -469,6 +498,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
                 l = 1 << gpio;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+        case METHOD_GPIO_24XX:
+                if (enable)
+                        reg += OMAP4_GPIO_SETDATAOUT;
+                else
+                        reg += OMAP4_GPIO_CLEARDATAOUT;
+                l = 1 << gpio;
+                break;
+#endif
         default:
                 WARN_ON(1);
                 return;
@@ -511,12 +549,16 @@ static int __omap_get_gpio_datain(int gpio)
                 reg += OMAP850_GPIO_DATA_INPUT;
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_DATAIN;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+        case METHOD_GPIO_24XX:
+                reg += OMAP4_GPIO_DATAIN;
+                break;
+#endif
         default:
                 return -EINVAL;
         }
@@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
         bank = get_gpio_bank(gpio);
         reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+        reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
         reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
 
         spin_lock_irqsave(&bank->lock, flags);
         val = __raw_readl(reg);
@@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
         reg = bank->base;
 
         enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+        reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
         reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
         __raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 {
         void __iomem *base = bank->base;
         u32 gpio_bit = 1 << gpio;
+        u32 val;
 
-        MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-                trigger & IRQ_TYPE_LEVEL_LOW);
-        MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-                trigger & IRQ_TYPE_LEVEL_HIGH);
-        MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-                trigger & IRQ_TYPE_EDGE_RISING);
-        MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-                trigger & IRQ_TYPE_EDGE_FALLING);
-
+        if (cpu_is_omap44xx()) {
+                MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+                        trigger & IRQ_TYPE_LEVEL_LOW);
+                MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+                        trigger & IRQ_TYPE_LEVEL_HIGH);
+                MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+                        trigger & IRQ_TYPE_EDGE_RISING);
+                MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+                        trigger & IRQ_TYPE_EDGE_FALLING);
+        } else {
+                MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+                        trigger & IRQ_TYPE_LEVEL_LOW);
+                MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+                        trigger & IRQ_TYPE_LEVEL_HIGH);
+                MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+                        trigger & IRQ_TYPE_EDGE_RISING);
+                MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+                        trigger & IRQ_TYPE_EDGE_FALLING);
+        }
         if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-                if (trigger != 0)
-                        __raw_writel(1 << gpio, bank->base
+                if (cpu_is_omap44xx()) {
+                        if (trigger != 0)
+                                __raw_writel(1 << gpio, bank->base+
+                                                OMAP4_GPIO_IRQWAKEN0);
+                        else {
+                                val = __raw_readl(bank->base +
+                                                        OMAP4_GPIO_IRQWAKEN0);
+                                __raw_writel(val & (~(1 << gpio)), bank->base +
+                                                         OMAP4_GPIO_IRQWAKEN0);
+                        }
+                } else {
+                        if (trigger != 0)
+                                __raw_writel(1 << gpio, bank->base
                                         + OMAP24XX_GPIO_SETWKUENA);
-                else
-                        __raw_writel(1 << gpio, bank->base
+                        else
+                                __raw_writel(1 << gpio, bank->base
                                         + OMAP24XX_GPIO_CLEARWKUENA);
+                }
         } else {
                 if (trigger != 0)
                         bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
                         bank->enabled_non_wakeup_gpios &= ~gpio_bit;
         }
 
-        bank->level_mask =
-                __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-                __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+        if (cpu_is_omap44xx()) {
+                bank->level_mask =
+                        __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+                        __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+        } else {
+                bank->level_mask =
+                        __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+                        __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+        }
 }
 #endif
 
@@ -783,12 +862,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
                 reg += OMAP850_GPIO_INT_STATUS;
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_IRQSTATUS1;
                 break;
 #endif
+#if defined(CONFIG_ARCH_OMAP4)
+        case METHOD_GPIO_24XX:
+                reg += OMAP4_GPIO_IRQSTATUS0;
+                break;
+#endif
         default:
                 WARN_ON(1);
                 return;
@@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
         /* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-        if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+        reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+        if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
                 __raw_writel(gpio_mask, reg);
 
         /* Flush posted write for the irq status to avoid spurious interrupts */
         __raw_readl(reg);
-#endif
+        }
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -853,13 +940,18 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
                 inv = 1;
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 reg += OMAP24XX_GPIO_IRQENABLE1;
                 mask = 0xffffffff;
                 break;
 #endif
+#if defined(CONFIG_ARCH_OMAP4)
+        case METHOD_GPIO_24XX:
+                reg += OMAP4_GPIO_IRQSTATUSSET0;
+                mask = 0xffffffff;
+                break;
+#endif
         default:
                 WARN_ON(1);
                 return 0;
@@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                         l |= gpio_mask;
                 break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         case METHOD_GPIO_24XX:
                 if (enable)
                         reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -937,6 +1028,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
                 l = gpio_mask;
                 break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+        case METHOD_GPIO_24XX:
+                if (enable)
+                        reg += OMAP4_GPIO_IRQSTATUSSET0;
+                else
+                        reg += OMAP4_GPIO_IRQSTATUSCLR0;
+                l = gpio_mask;
+                break;
+#endif
         default:
                 WARN_ON(1);
                 return;
@@ -1112,11 +1212,14 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
         if (bank->method == METHOD_GPIO_850)
                 isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
         if (bank->method == METHOD_GPIO_24XX)
                 isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
 #endif
+#if defined(CONFIG_ARCH_OMAP4)
+        if (bank->method == METHOD_GPIO_24XX)
+                isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
+#endif
         while(1) {
                 u32 isr_saved, level_mask = 0;
                 u32 enabled;
@@ -1189,6 +1292,7 @@ static void gpio_mask_irq(unsigned int irq)
         struct gpio_bank *bank = get_irq_chip_data(irq);
 
         _set_gpio_irqenable(bank, gpio, 0);
+        _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1300,11 @@ static void gpio_unmask_irq(unsigned int irq)
         unsigned int gpio = irq - IH_GPIO_BASE;
         struct gpio_bank *bank = get_irq_chip_data(irq);
         unsigned int irq_mask = 1 << get_gpio_index(gpio);
+        struct irq_desc *desc = irq_to_desc(irq);
+        u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+        if (trigger)
+                _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
         /* For level-triggered GPIOs, the clearing must be done after
          * the HW source is cleared, thus after the handler has run */
@@ -1547,7 +1656,7 @@ static int __init _omap_gpio_init(void)
 
                 gpio_bank_count = OMAP34XX_NR_GPIOS;
                 gpio_bank = gpio_bank_44xx;
-                rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+                rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
                 printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
                         (rev >> 4) & 0x0f, rev & 0x0f);
         }
@@ -1581,7 +1690,16 @@ static int __init _omap_gpio_init(void)
                         static const u32 non_wakeup_gpios[] = {
                                 0xe203ffc0, 0x08700040
                         };
-
+                if (cpu_is_omap44xx()) {
+                        __raw_writel(0xffffffff, bank->base +
+                                                OMAP4_GPIO_IRQSTATUSCLR0);
+                        __raw_writew(0x0015, bank->base +
+                                                OMAP4_GPIO_SYSCONFIG);
+                        __raw_writel(0x00000000, bank->base +
+                                                 OMAP4_GPIO_DEBOUNCENABLE);
+                        /* Initialize interface clock ungated, module enabled */
+                        __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+                } else {
                         __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
                         __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
                         __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1589,12 +1707,12 @@ static int __init _omap_gpio_init(void)
 
                         /* Initialize interface clock ungated, module enabled */
                         __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+                }
                         if (i < ARRAY_SIZE(non_wakeup_gpios))
                                 bank->non_wakeup_gpios = non_wakeup_gpios[i];
                         gpio_count = 32;
                 }
 #endif
-
                 /* REVISIT eventually switch from OMAP-specific gpio structs
                  * over to the generic ones
                  */
@@ -1680,14 +1798,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
                         wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
                         break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 case METHOD_GPIO_24XX:
                         wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
                         wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                         wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
                         break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+                case METHOD_GPIO_24XX:
+                        wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+                        wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+                        wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+                        break;
+#endif
                 default:
                         continue;
                 }
@@ -1722,13 +1846,18 @@ static int omap_gpio_resume(struct sys_device *dev)
                         wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
                         break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 case METHOD_GPIO_24XX:
                         wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
                         wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
                         break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+                case METHOD_GPIO_24XX:
+                        wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+                        wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+                        break;
+#endif
                 default:
                         continue;
                 }
@@ -1772,21 +1901,29 @@ void omap2_gpio_prepare_for_retention(void)
 
                 if (!(bank->enabled_non_wakeup_gpios))
                         continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                                defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
                 l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
                 l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+                bank->saved_datain = __raw_readl(bank->base +
+                                                        OMAP4_GPIO_DATAIN);
+                l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+                l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
                 bank->saved_fallingdetect = l1;
                 bank->saved_risingdetect = l2;
                 l1 &= ~bank->enabled_non_wakeup_gpios;
                 l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
                 __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+                __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+                __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+#endif
                 c++;
         }
         if (!c) {
@@ -1808,27 +1945,29 @@ void omap2_gpio_resume_after_retention(void)
 
                 if (!(bank->enabled_non_wakeup_gpios))
                         continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                 __raw_writel(bank->saved_fallingdetect,
                                  bank->base + OMAP24XX_GPIO_FALLINGDETECT);
                 __raw_writel(bank->saved_risingdetect,
                                  bank->base + OMAP24XX_GPIO_RISINGDETECT);
+                l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+                __raw_writel(bank->saved_fallingdetect,
+                                 bank->base + OMAP4_GPIO_FALLINGDETECT);
+                __raw_writel(bank->saved_risingdetect,
+                                 bank->base + OMAP4_GPIO_RISINGDETECT);
+                l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
 #endif
                 /* Check if any of the non-wakeup interrupt GPIOs have changed
                  * state.  If so, generate an IRQ by software.  This is
                  * horribly racy, but it's the best we can do to work around
                  * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
-                l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
                 l ^= bank->saved_datain;
                 l &= bank->non_wakeup_gpios;
                 if (l) {
                         u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-                        defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
                         old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
                         old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
                         __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
@@ -1836,6 +1975,20 @@ void omap2_gpio_resume_after_retention(void)
                         __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
                         __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+                        old0 = __raw_readl(bank->base +
+                                                OMAP4_GPIO_LEVELDETECT0);
+                        old1 = __raw_readl(bank->base +
+                                                OMAP4_GPIO_LEVELDETECT1);
+                        __raw_writel(old0 | l, bank->base +
+                                                OMAP4_GPIO_LEVELDETECT0);
+                        __raw_writel(old1 | l, bank->base +
+                                                OMAP4_GPIO_LEVELDETECT1);
+                        __raw_writel(old0, bank->base +
+                                                OMAP4_GPIO_LEVELDETECT0);
+                        __raw_writel(old1, bank->base +
+                                                OMAP4_GPIO_LEVELDETECT1);
+#endif
                 }
         }
 
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc01962..72f680b7180d 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
 #define OMAP_DMA4_CCFN(n)               (0x60 * (n) + 0xc0)
 #define OMAP_DMA4_COLOR(n)              (0x60 * (n) + 0xc4)
 
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)                (0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)               (0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)               (0x60 * (n) + 0xd8)
+
 /* Dummy defines to keep multi-omap compiles happy */
 #define OMAP1_DMA_REVISION              0
 #define OMAP1_DMA_IRQSTATUS_L0          0
@@ -311,6 +316,89 @@
 #define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
 
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ      6       /* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2           7       /* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1           9       /* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2           10      /* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3           12      /* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4           13      /* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ       14      /* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX          17      /* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX          18      /* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX          19      /* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX          20      /* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX            25      /* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX            26      /* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX            27      /* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX            28      /* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX            29      /* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX            30      /* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX          31      /* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX          32      /* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX          33      /* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX          34      /* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX            47      /* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX            48      /* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX           49      /* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX           50      /* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX           51      /* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX           52      /* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX           53      /* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX           54      /* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX           55      /* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX           56      /* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX            57      /* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX            58      /* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX            59      /* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX            60      /* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX            61      /* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX            62      /* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3           64      /* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP           65      /* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL           66      /* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0      72      /* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1      73      /* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2      74      /* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3      75      /* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ       76      /* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX            77      /* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX            78      /* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX            79      /* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX            80      /* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0      81      /* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1      82      /* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2      83      /* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3      84      /* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0           101     /* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1           102     /* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2           103     /* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3           104     /* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4           105     /* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5           106     /* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6           107     /* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7           108     /* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX            124     /* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX            125     /* S_DMA_124 */
+
 /*----------------------------------------------------------------------------*/
 
 /* Hardware registers for LCD DMA */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea76769..ec6f81e06d39 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
 #define OMAP34XX_MCBSP4_BASE    0x49026000
 #define OMAP34XX_MCBSP5_BASE    0x48096000
 
+#define OMAP44XX_MCBSP1_BASE    0x49022000
+#define OMAP44XX_MCBSP2_BASE    0x49024000
+#define OMAP44XX_MCBSP3_BASE    0x49026000
+#define OMAP44XX_MCBSP4_BASE    0x48074000
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
 #define OMAP_MCBSP_REG_DRR2     0x00
@@ -98,7 +103,8 @@
 #define AUDIO_DMA_TX            OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX            OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+        defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2     0x00
 #define OMAP_MCBSP_REG_DRR1     0x04
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02d1527..def0529c75eb 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f38..e42fa7cfc795 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
         OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
         OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
         OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
-        if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+        if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
                 OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
                 OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
         }
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index abc79d44acaa..98548c6903a0 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
         int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
         struct pxa_gpio_chip *chips;
 
-        /* this is early, we have to use bootmem allocator, and we really
-         * want this to be allocated dynamically for different 'gpio_end'
-         */
-        chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+        chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
         if (chips == NULL) {
                 pr_err("%s: failed to allocate GPIO chips\n", __func__);
                 return -ENOMEM;
         }
 
-        memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
         for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
                 struct gpio_chip *c = &chips[i].chip;
 
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469b..8931c5f0e46b 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
         help
           Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+        bool
+        help
+          Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b1833..3c09109e9e84 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,13 +28,17 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)                += pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)  += pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)          += pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)     += dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)    += dev-hsmmc1.o
 obj-y                           += dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)      += dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)       += dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)        += dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)  += dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND)      += dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 000000000000..4e5323732434
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+        [0] = {
+                .start = S3C_PA_NAND,
+                .end   = S3C_PA_NAND + SZ_1M,
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+struct platform_device s3c_device_nand = {
+        .name             = "s3c2410-nand",
+        .id               = -1,
+        .num_resources    = ARRAY_SIZE(s3c_nand_resource),
+        .resource         = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6c..5f3b1cd53b90 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
                          unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
         s3c_adc_register(struct platform_device *pdev,
-                         void (*select)(unsigned selected),
-                         void (*conv)(unsigned d0, unsigned d1,
+                         void (*select)(struct s3c_adc_client *client,
+                                        unsigned selected),
+                         void (*conv)(struct s3c_adc_client *client,
+                                      unsigned d0, unsigned d1,
                                       unsigned *samples_left),
                          unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e90..7b982b7f28cd 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
         unsigned long   fclk;
         unsigned long   armclk;
@@ -25,48 +40,84 @@ struct s3c_freq {
         unsigned long   pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
         struct cpufreq_freqs    freqs;
         struct s3c_freq         old;
         struct s3c_freq         new;
+
+        unsigned int            pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-        int             p_divisor;      /* fclk / pclk */
-        int             h_divisor;      /* fclk / hclk */
-        int             arm_divisor;    /* not all cpus have this. */
-        unsigned char   dvs;            /* using dvs mode to arm. */
+        int             p_divisor;
+        int             h_divisor;
+        int             arm_divisor;
+        unsigned char   dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
         unsigned long           freq;
         unsigned long           pll_reg;
 };
 
-struct s3c_cpufreq_config {
-        struct s3c_freq         freq;
-        struct s3c_pllval       pll;
-        struct s3c_clkdivs      divs;
-        struct s3c_cpufreq_info *info;  /* for core, not drivers */
-        struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *      initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *      lines that will require the hardware timing registers to be
+ *      updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *      is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-        unsigned int    refresh;        /* refresh period in ns */
+        unsigned int    refresh;
         unsigned int    auto_io:1;      /* automatically init io timings. */
         unsigned int    need_io:1;      /* set if needs io timing support. */
 
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba070..fbc3d498e02e 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b0..0f540ea1e999 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
@@ -56,5 +58,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 000000000000..1ba88ea0aa31
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+        const char      *name;
+        unsigned int    mult;
+        unsigned int    div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+        struct s3c_hwmon_chcfg  *in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a54..250be311c85b 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ      S3C_ADDR(0x00000000)    /* irq controller(s) */
 #define S3C_VA_SYS      S3C_ADDR(0x00100000)    /* system control */
-#define S3C_VA_MEM      S3C_ADDR(0x00200000)    /* system control */
+#define S3C_VA_MEM      S3C_ADDR(0x00200000)    /* memory control */
 #define S3C_VA_TIMER    S3C_ADDR(0x00300000)    /* timer block */
 #define S3C_VA_WATCHDOG S3C_ADDR(0x00400000)    /* watchdog */
 #define S3C_VA_UART     S3C_ADDR(0x01000000)    /* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c/pwm.c
index 0120b760315b..f3d37ac5595b 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
  *
  * Copyright (c) 2007 Ben Dooks
  * Copyright (c) 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX PWM device core
+ * S3C series PWM device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/pwm.h>
 
 #include <mach/irqs.h>
+#include <mach/map.h>
 
 #include <plat/devs.h>
 #include <plat/regs-timer.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58e..9c7aca489643 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
         default y
         select NO_IOPORT
         select ARCH_REQUIRE_GPIOLIB
+        select S3C_DEVICE_NAND
         help
           Base platform code for any Samsung S3C24XX device
 
@@ -34,6 +35,40 @@ config CPU_S3C244X
         help
           Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+        bool "S3C2440/S3C2442 CPU Frequency scaling support"
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+        select S3C2410_CPUFREQ_UTILS
+        default y
+        help
+          CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+        bool
+        help
+          Indicate that the build needs to support 12MHz system
+          crystal.
+
+config S3C2440_XTAL_16934400
+        bool
+        help
+          Indicate that the build needs to support 16.9344MHz system
+          crystal.
+
+config S3C2440_PLL_12000000
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
         bool "PWM device support"
         select HAVE_PWM
@@ -105,8 +140,39 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
           SPI GPIO configuration code for BUS 1 when connected to
           GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+        bool
+        help
+          SPI GPIO configuration code for BUS 1 when connected to
+          GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select io timing code that is common to the s3c2410
+          and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select timing code that is common to the s3c2410
+          and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+        help
+          Intel node to select io timing code that is common to the s3c2412
+          and the s3c2443.
+
 config MACH_SMDK
         bool
         help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c2827..7780d2dd833a 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@ obj-y				+= gpiolib.o
 obj-y                           += clock.o
 obj-$(CONFIG_S3C24XX_DCLK)      += clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)  += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)   += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)         += pm-simtec.o
 obj-$(CONFIG_PM)                += pm.o
 obj-$(CONFIG_PM)                += irq-pm.o
 obj-$(CONFIG_PM)                += sleep.o
-obj-$(CONFIG_S3C24XX_PWM)       += pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)     += s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)       += dma.o
 obj-$(CONFIG_S3C24XX_ADC)       += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)  += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)  += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)      += setup-i2c.o
@@ -41,6 +50,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)   += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9e..11117a7ba911 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
         struct platform_device  *pdev;
         struct list_head         pend;
+        wait_queue_head_t       *wait;
 
         unsigned int             nr_samples;
+        int                      result;
         unsigned char            is_ts;
         unsigned char            channel;
 
-        void    (*select_cb)(unsigned selected);
-        void    (*convert_cb)(unsigned val1, unsigned val2,
+        void    (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+        void    (*convert_cb)(struct s3c_adc_client *c,
+                              unsigned val1, unsigned val2,
                               unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
         unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-        client->select_cb(1);
+        client->select_cb(client, 1);
 
         con &= ~S3C2410_ADCCON_MUXMASK;
         con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+                             unsigned v, unsigned u, unsigned *left)
+{
+        client->result = v;
+        wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+        DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+        int ret;
+
+        client->convert_cb = s3c_convert_done;
+        client->wait = &wake;
+        client->result = -1;
+
+        ret = s3c_adc_start(client, ch, 1);
+        if (ret < 0)
+                goto err;
+
+        ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+        if (client->result < 0) {
+                ret = -ETIMEDOUT;
+                goto err;
+        }
+
+        client->convert_cb = NULL;
+        return client->result;
+
+err:
+        return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+                                   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-                                        void (*select)(unsigned int selected),
-                                        void (*conv)(unsigned d0, unsigned d1,
+                                        void (*select)(struct s3c_adc_client *client,
+                                                       unsigned int selected),
+                                        void (*conv)(struct s3c_adc_client *client,
+                                                     unsigned d0, unsigned d1,
                                                      unsigned *samples_left),
                                         unsigned int is_ts)
 {
         struct s3c_adc_client *client;
 
         WARN_ON(!pdev);
-        WARN_ON(!conv);
 
         if (!select)
                 select = s3c_adc_default_select;
 
-        if (!conv || !pdev)
+        if (!pdev)
                 return ERR_PTR(-EINVAL);
 
         client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
         adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
         client->nr_samples--;
-        (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+        if (client->convert_cb)
+                (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+                                     &client->nr_samples);
 
         if (client->nr_samples > 0) {
                 /* fire another conversion for this */
 
-                client->select_cb(1);
+                client->select_cb(client, 1);
                 s3c_adc_convert(adc);
         } else {
                 local_irq_save(flags);
-                (client->select_cb)(0);
+                (client->select_cb)(client, 0);
                 adc->cur = NULL;
 
                 s3c_adc_try(adc);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 000000000000..a9276667c2fb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+        seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+                   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+        struct s3c_cpufreq_config *cfg;
+        struct s3c_cpufreq_board *brd;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        brd = cfg->board;
+        if (!brd) {
+                seq_printf(seq, "no board definition set?\n");
+                return 0;
+        }
+
+        seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+        seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+        seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+        show_max(seq, &brd->max);
+
+
+        return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+        .open           = fops_board_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+        struct s3c_cpufreq_config *cfg;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+        seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+                   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+        seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+        seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+        seq_printf(seq, "\n");
+
+        show_max(seq, &cfg->max);
+
+        seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+                   cfg->divs.h_divisor, cfg->divs.p_divisor,
+                   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+        seq_printf(seq, "\n");
+
+        seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+        return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+        .open           = fops_info_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+        void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+        struct s3c_cpufreq_config *cfg;
+        struct s3c_iotimings *iot;
+        union s3c_iobank *iob;
+        int bank;
+
+        cfg = s3c_cpufreq_getconfig();
+        if (!cfg) {
+                seq_printf(seq, "no configuration registered\n");
+                return 0;
+        }
+
+        show_bank = cfg->info->debug_io_show;
+        if (!show_bank) {
+                seq_printf(seq, "no code to show bank timing\n");
+                return 0;
+        }
+
+        iot = s3c_cpufreq_getiotimings();
+        if (!iot) {
+                seq_printf(seq, "no io timings registered\n");
+                return 0;
+        }
+
+        seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                iob = &iot->bank[bank];
+
+                seq_printf(seq, "bank %d: ", bank);
+
+                if (!iob->io_2410) {
+                        seq_printf(seq, "nothing set\n");
+                        continue;
+                }
+
+                show_bank(seq, cfg, iob);
+        }
+
+        return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+        return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+        .open           = fops_io_open,
+        .read           = seq_read,
+        .llseek         = seq_lseek,
+        .release        = single_release,
+        .owner          = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+        dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+        if (IS_ERR(dbgfs_root)) {
+                printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+                return PTR_ERR(dbgfs_root);
+        }
+
+        dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+                                            NULL, &fops_io);
+
+        dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+                                              NULL, &fops_info);
+
+        dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+                                               NULL, &fops_board);
+
+        return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 000000000000..4f1b789a1173
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+        return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+        return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long fclk, pclk, hclk, armclk;
+
+        cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+        cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+        cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+        cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+        cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+        cfg->pll.frequency = fclk;
+
+        cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+        cfg->divs.h_divisor = fclk / hclk;
+        cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long pll = cfg->pll.frequency;
+
+        cfg->freq.fclk = pll;
+        cfg->freq.hclk = pll / cfg->divs.h_divisor;
+        cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+        /* convert hclk into 10ths of nanoseconds for io calcs */
+        cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+        int diff_cur = abs(target - c);
+        int diff_new = abs(target - n);
+
+        return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+                                 struct s3c_cpufreq_config *cfg)
+{
+        s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+                     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+                     cfg->freq.hclk, cfg->divs.h_divisor,
+                     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+        if (cfg->info->set_iotiming)
+                (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+        if (cfg->info->calc_iotiming)
+                return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+        return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+        (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+        cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+                                         unsigned int freq)
+{
+        clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+                                 unsigned int target_freq,
+                                 struct cpufreq_frequency_table *pll)
+{
+        struct s3c_cpufreq_freqs freqs;
+        struct s3c_cpufreq_config cpu_new;
+        unsigned long flags;
+
+        cpu_new = cpu_cur;  /* copy new from current */
+
+        s3c_cpufreq_show("cur", &cpu_cur);
+
+        /* TODO - check for DMA currently outstanding */
+
+        cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+        if (pll)
+                freqs.pll_changing = 1;
+
+        /* update our frequencies */
+
+        cpu_new.freq.armclk = target_freq;
+        cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+        if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+                printk(KERN_ERR "no divisors for %d\n", target_freq);
+                goto err_notpossible;
+        }
+
+        s3c_freq_dbg("%s: got divs\n", __func__);
+
+        s3c_cpufreq_calc(&cpu_new);
+
+        s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+        if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+                if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+                        printk(KERN_ERR "%s: no IO timings\n", __func__);
+                        goto err_notpossible;
+                }
+        }
+
+        s3c_cpufreq_show("new", &cpu_new);
+
+        /* setup our cpufreq parameters */
+
+        freqs.old = cpu_cur.freq;
+        freqs.new = cpu_new.freq;
+
+        freqs.freqs.cpu = 0;
+        freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+        freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+        /* update f/h/p clock settings before we issue the change
+         * notification, so that drivers do not need to do anything
+         * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+        s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+        s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+        s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+        s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+        /* start the frequency change */
+
+        if (policy)
+                cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+        /* If hclk is staying the same, then we do not need to
+         * re-write the IO or the refresh timings whilst we are changing
+         * speed. */
+
+        local_irq_save(flags);
+
+        /* is our memory clock slowing down? */
+        if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+                s3c_cpufreq_setrefresh(&cpu_new);
+                s3c_cpufreq_setio(&cpu_new);
+        }
+
+        if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+                /* not changing PLL, just set the divisors */
+
+                s3c_cpufreq_setdivs(&cpu_new);
+        } else {
+                if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+                        /* slow the cpu down, then set divisors */
+
+                        s3c_cpufreq_setfvco(&cpu_new);
+                        s3c_cpufreq_setdivs(&cpu_new);
+                } else {
+                        /* set the divisors, then speed up */
+
+                        s3c_cpufreq_setdivs(&cpu_new);
+                        s3c_cpufreq_setfvco(&cpu_new);
+                }
+        }
+
+        /* did our memory clock speed up */
+        if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+                s3c_cpufreq_setrefresh(&cpu_new);
+                s3c_cpufreq_setio(&cpu_new);
+        }
+
+        /* update our current settings */
+        cpu_cur = cpu_new;
+
+        local_irq_restore(flags);
+
+        /* notify everyone we've done this */
+        if (policy)
+                cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+        s3c_freq_dbg("%s: finished\n", __func__);
+        return 0;
+
+ err_notpossible:
+        printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+        return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+                              unsigned int target_freq,
+                              unsigned int relation)
+{
+        struct cpufreq_frequency_table *pll;
+        unsigned int index;
+
+        /* avoid repeated calls which cause a needless amout of duplicated
+         * logging output (and CPU time as the calculation process is
+         * done) */
+        if (target_freq == last_target)
+                return 0;
+
+        last_target = target_freq;
+
+        s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+                     __func__, policy, target_freq, relation);
+
+        if (ftab) {
+                if (cpufreq_frequency_table_target(policy, ftab,
+                                                   target_freq, relation,
+                                                   &index)) {
+                        s3c_freq_dbg("%s: table failed\n", __func__);
+                        return -EINVAL;
+                }
+
+                s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+                             target_freq, index, ftab[index].frequency);
+                target_freq = ftab[index].frequency;
+        }
+
+        target_freq *= 1000;  /* convert target to Hz */
+
+        /* find the settings for our new frequency */
+
+        if (!pll_reg || cpu_cur.lock_pll) {
+                /* either we've not got any PLL values, or we've locked
+                 * to the current one. */
+                pll = NULL;
+        } else {
+                struct cpufreq_policy tmp_policy;
+                int ret;
+
+                /* we keep the cpu pll table in Hz, to ensure we get an
+                 * accurate value for the PLL output. */
+
+                tmp_policy.min = policy->min * 1000;
+                tmp_policy.max = policy->max * 1000;
+                tmp_policy.cpu = policy->cpu;
+
+                /* cpufreq_frequency_table_target uses a pointer to 'index'
+                 * which is the number of the table entry, not the value of
+                 * the table entry's index field. */
+
+                ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+                                                     target_freq, relation,
+                                                     &index);
+
+                if (ret < 0) {
+                        printk(KERN_ERR "%s: no PLL available\n", __func__);
+                        goto err_notpossible;
+                }
+
+                pll = pll_reg + index;
+
+                s3c_freq_dbg("%s: target %u => %u\n",
+                             __func__, target_freq, pll->frequency);
+
+                target_freq = pll->frequency;
+        }
+
+        return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+        printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+        return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+        return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+        struct clk *clk;
+
+        clk = clk_get(dev, name);
+        if (IS_ERR(clk))
+                printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+        return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+        printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+        if (policy->cpu != 0)
+                return -EINVAL;
+
+        policy->cur = s3c_cpufreq_get(0);
+        policy->min = policy->cpuinfo.min_freq = 0;
+        policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+        policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+        /* feed the latency information from the cpu driver */
+        policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+        if (ftab)
+                cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+        return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+        _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+        _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+        clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+        clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+        clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+        clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+        if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+            IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+                printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+                return -ENOENT;
+        }
+
+        printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+               clk_get_rate(clk_fclk) / 1000,
+               clk_get_rate(clk_hclk) / 1000,
+               clk_get_rate(clk_pclk) / 1000,
+               clk_get_rate(clk_arm) / 1000);
+
+        return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+        if (policy->cpu != 0)
+                return -EINVAL;
+
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+        suspend_pll.frequency = clk_get_rate(_clk_mpll);
+        suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+        suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+        return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+        int ret;
+
+        s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+        last_target = ~0;       /* invalidate last_target setting */
+
+        /* first, find out what speed we resumed at. */
+        s3c_cpufreq_resume_clocks();
+
+        /* whilst we will be called later on, we try and re-set the
+         * cpu frequencies as soon as possible so that we do not end
+         * up resuming devices and then immediatley having to re-set
+         * a number of settings once these devices have restarted.
+         *
+         * as a note, it is expected devices are not used until they
+         * have been un-suspended and at that time they should have
+         * used the updated clock settings.
+         */
+
+        ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+        if (ret) {
+                printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+                return ret;
+        }
+
+        return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+        .flags          = CPUFREQ_STICKY,
+        .verify         = s3c_cpufreq_verify,
+        .target         = s3c_cpufreq_target,
+        .get            = s3c_cpufreq_get,
+        .init           = s3c_cpufreq_init,
+        .suspend        = s3c_cpufreq_suspend,
+        .resume         = s3c_cpufreq_resume,
+        .name           = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+        if (!info || !info->name) {
+                printk(KERN_ERR "%s: failed to pass valid information\n",
+                       __func__);
+                return -EINVAL;
+        }
+
+        printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+               info->name);
+
+        /* check our driver info has valid data */
+
+        BUG_ON(info->set_refresh == NULL);
+        BUG_ON(info->set_divs == NULL);
+        BUG_ON(info->calc_divs == NULL);
+
+        /* info->set_fvco is optional, depending on whether there
+         * is a need to set the clock code. */
+
+        cpu_cur.info = info;
+
+        /* Note, driver registering should probably update locktime */
+
+        return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+        struct s3c_cpufreq_board *ours;
+
+        if (!board) {
+                printk(KERN_INFO "%s: no board data\n", __func__);
+                return -EINVAL;
+        }
+
+        /* Copy the board information so that each board can make this
+         * initdata. */
+
+        ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+        if (ours == NULL) {
+                printk(KERN_ERR "%s: no memory\n", __func__);
+                return -ENOMEM;
+        }
+
+        *ours = *board;
+        cpu_cur.board = ours;
+
+        return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+        int ret;
+
+        if (!cpu_cur.info->get_iotiming) {
+                printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+                return -ENOENT;
+        }
+
+        printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+        ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+        if (ret)
+                printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+        return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+                                 struct s3c_freq *a, struct s3c_freq *b)
+{
+        dst->fclk = do_min(a->fclk, b->fclk);
+        dst->hclk = do_min(a->hclk, b->hclk);
+        dst->pclk = do_min(a->pclk, b->pclk);
+        dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+        u32 result;
+
+        result = freq * time_us;
+        result = DIV_ROUND_UP(result, 1000 * 1000);
+
+        return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+        unsigned int bits = cpu_cur.info->locktime_bits;
+        u32 rate = (u32)clk_get_rate(_clk_xtal);
+        u32 val;
+
+        if (bits == 0) {
+                WARN_ON(1);
+                return;
+        }
+
+        val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+        val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+        printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+        __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+        int size, ret;
+
+        if (!cpu_cur.info->calc_freqtable)
+                return -EINVAL;
+
+        kfree(ftab);
+        ftab = NULL;
+
+        size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+        size++;
+
+        ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+        if (!ftab) {
+                printk(KERN_ERR "%s: no memory for tables\n", __func__);
+                return -ENOMEM;
+        }
+
+        ftab_size = size;
+
+        ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+        s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+        return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+        int ret = 0;
+
+        if (cpu_cur.info && cpu_cur.board) {
+                ret = s3c_cpufreq_initclks();
+                if (ret)
+                        goto out;
+
+                /* get current settings */
+                s3c_cpufreq_getcur(&cpu_cur);
+                s3c_cpufreq_show("cur", &cpu_cur);
+
+                if (cpu_cur.board->auto_io) {
+                        ret = s3c_cpufreq_auto_io();
+                        if (ret) {
+                                printk(KERN_ERR "%s: failed to get io timing\n",
+                                       __func__);
+                                goto out;
+                        }
+                }
+
+                if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+                        printk(KERN_ERR "%s: no IO support registered\n",
+                               __func__);
+                        ret = -EINVAL;
+                        goto out;
+                }
+
+                if (!cpu_cur.info->need_pll)
+                        cpu_cur.lock_pll = 1;
+
+                s3c_cpufreq_update_loctkime();
+
+                s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+                                     &cpu_cur.info->max);
+
+                if (cpu_cur.info->calc_freqtable)
+                        s3c_cpufreq_build_freq();
+
+                ret = cpufreq_register_driver(&s3c24xx_driver);
+        }
+
+ out:
+        return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+                               unsigned int plls_no)
+{
+        struct cpufreq_frequency_table *vals;
+        unsigned int size;
+
+        size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+        vals = kmalloc(size, GFP_KERNEL);
+        if (vals) {
+                memcpy(vals, plls, size);
+                pll_reg = vals;
+
+                /* write a terminating entry, we don't store it in the
+                 * table that is stored in the kernel */
+                vals += plls_no;
+                vals->frequency = CPUFREQ_TABLE_END;
+
+                printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+        } else
+                printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+        return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da15..5447e60f3936 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
                 .map_io         = s3c2410_map_io,
                 .init_clocks    = s3c2410_init_clocks,
                 .init_uarts     = s3c2410_init_uarts,
-                .init           = s3c2410_init,
+                .init           = s3c2410a_init,
                 .name           = name_s3c2410a
         },
         {
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a39..f52a92ce8dda 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -180,25 +182,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
         }
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-        [0] = {
-                .start = S3C24XX_PA_NAND,
-                .end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-                .flags = IORESOURCE_MEM,
-        }
-};
-
-struct platform_device s3c_device_nand = {
-        .name             = "s3c2410-nand",
-        .id               = -1,
-        .num_resources    = ARRAY_SIZE(s3c_nand_resource),
-        .resource         = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
@@ -348,7 +331,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-        .name           = "s3c24xx-hwmon",
+        .name           = "s3c-hwmon",
         .id             = -1,
         .dev.parent     = &s3c_device_adc.dev,
 };
@@ -473,4 +456,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+        [0] = {
+                .start = S3C2440_PA_AC97,
+                .end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_S3C244x_AC97,
+                .end   = IRQ_S3C244x_AC97,
+                .flags = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .name  = "PCM out",
+                .start = DMACH_PCM_OUT,
+                .end   = DMACH_PCM_OUT,
+                .flags = IORESOURCE_DMA,
+        },
+        [3] = {
+                .name  = "PCM in",
+                .start = DMACH_PCM_IN,
+                .end   = DMACH_PCM_IN,
+                .flags = IORESOURCE_DMA,
+        },
+        [4] = {
+                .name  = "Mic in",
+                .start = DMACH_MIC_IN,
+                .end   = DMACH_MIC_IN,
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+        .name             = "s3c-ac97",
+        .id               = -1,
+        .num_resources    = ARRAY_SIZE(s3c_ac97_resource),
+        .resource         = s3c_ac97_resource,
+        .dev              = {
+                .dma_mask = &s3c_device_ac97_dmamask,
+                .coherent_dma_mask = 0xffffffffUL
+        }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 000000000000..efeb025affc7
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO  (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+        unsigned long   bankcon;
+        unsigned int    tacp;
+        unsigned int    tacs;
+        unsigned int    tcos;
+        unsigned int    tacc;
+        unsigned int    tcoh;           /* nCS hold afrer nOE/nWE */
+        unsigned int    tcah;           /* Address hold after nCS */
+        unsigned char   nwait_en;       /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+        unsigned int    idcy;
+        unsigned int    wstrd;
+        unsigned int    wstwr;
+        unsigned int    wstoen;
+        unsigned int    wstwen;
+        unsigned int    wstbrd;
+
+        /* register cache */
+        unsigned char   smbidcyr;
+        unsigned char   smbwstrd;
+        unsigned char   smbwstwr;
+        unsigned char   smbwstoen;
+        unsigned char   smbwstwen;
+        unsigned char   smbwstbrd;
+};
+
+union s3c_iobank {
+        struct s3c2410_iobank_timing    *io_2410;
+        struct s3c2412_iobank_timing    *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+        union s3c_iobank        bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+        struct s3c_pllval       *vals;
+        int                      size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+        struct s3c_freq         freq;
+        struct s3c_freq         max;
+        struct cpufreq_frequency_table pll;
+        struct s3c_clkdivs      divs;
+        struct s3c_cpufreq_info *info;  /* for core, not drivers */
+        struct s3c_cpufreq_board *board;
+
+        unsigned int    lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *      any frequency changes. This is really only need by devices like the
+ *      S3C2410 where there is no or limited divider between the PLL and the
+ *      ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *      from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *      from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *      current frequency configuration. If the table passed in is NULL,
+ *      then the return is the number of elements to be filled for allocation
+ *      of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+        const char              *name;
+        struct s3c_freq         max;
+
+        unsigned int            latency;
+
+        unsigned int            locktime_m;
+        unsigned int            locktime_u;
+        unsigned char           locktime_bits;
+
+        unsigned int            need_pll:1;
+
+        /* driver routines */
+
+        void            (*resume_clocks)(void);
+
+        int             (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+                                        struct s3c_iotimings *timings);
+
+        void            (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+                                        struct s3c_iotimings *timings);
+
+        int             (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+                                         struct s3c_iotimings *timings);
+
+        int             (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+                                          struct cpufreq_frequency_table *t,
+                                          size_t table_size);
+
+        void            (*debug_io_show)(struct seq_file *seq,
+                                         struct s3c_cpufreq_config *cfg,
+                                         union s3c_iobank *iob);
+
+        void            (*set_refresh)(struct s3c_cpufreq_config *cfg);
+        void            (*set_fvco)(struct s3c_cpufreq_config *cfg);
+        void            (*set_divs)(struct s3c_cpufreq_config *cfg);
+        int             (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+                                     struct s3c_cpufreq_config *cfg,
+                                     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+                                     struct s3c_cpufreq_config *cfg,
+                                     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                                 struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+                                      int index, size_t table_size,
+                                      unsigned int freq)
+{
+        if (index < 0)
+                return index;
+
+        if (table) {
+                if (index >= table_size)
+                        return -ENOMEM;
+
+                s3c_freq_dbg("%s: { %d = %u kHz }\n",
+                             __func__, index, freq);
+
+                table[index].index = index;
+                table[index].frequency = freq;
+        }
+
+        return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 000000000000..8521b8372c5f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759e..b6deeef8f663 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad2..d02f5f02045e 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
         }
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+        u32 intmod;
+        unsigned offs;
+
+        if (on) {
+                offs = irq - FIQ_START;
+                if (offs > 31)
+                        return -EINVAL;
+
+                intmod = 1 << offs;
+        } else {
+                intmod = 0;
+        }
+
+        __raw_writel(intmod, S3C2410_INTMOD);
+        return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
         int irqno;
         int i;
 
+#ifdef CONFIG_FIQ
+        init_FIQ();
+#endif
+
         irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
         /* first, clear all interrupts pending... */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 000000000000..43ea80190d87
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        unsigned long refresh;
+        unsigned long refval;
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * down to ensure that we do not overflow 32 bit numbers.
+         *
+         * This should work for HCLK up to 133MHz and refresh period up
+         * to 30usec.
+         */
+
+        refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+        refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+        refresh = (1 << 11) + 1 - refresh;
+
+        s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+        refval = __raw_readl(S3C2410_REFRESH);
+        refval &= ~((1 << 12) - 1);
+        refval |= refresh;
+        __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+        __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 000000000000..d0a3a145cd4d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+                                 struct s3c_iotimings *timings)
+{
+        struct s3c2410_iobank_timing *bt;
+        int bank;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = timings->bank[bank].io_2410;
+                if (!bt)
+                        continue;
+
+                printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+                       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+                       print_ns(bt->tacs),
+                       print_ns(bt->tcos),
+                       print_ns(bt->tacc),
+                       print_ns(bt->tcoh),
+                       print_ns(bt->tcah));
+        }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+        return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+        return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+        if (cyc == 0)
+                return 0;
+
+        return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+                              unsigned long *v, int shift)
+{
+        unsigned int div = to_div(cyc, hclk_tns);
+        unsigned long val;
+
+        s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+                       __func__, cyc, hclk_tns, shift, div);
+
+        switch (div) {
+        case 0:
+                val = 0;
+                break;
+        case 1:
+                val = 1;
+                break;
+        case 2:
+                val = 2;
+                break;
+        case 3:
+        case 4:
+                val = 3;
+                break;
+        default:
+                return -1;
+        }
+
+        *v |= val << shift;
+        return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+        /* Currently no support for Tacp calculations. */
+        return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+                     unsigned long hclk_tns, unsigned long *v)
+{
+        unsigned int div = to_div(cyc, hclk_tns);
+        unsigned long val;
+
+        s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+                       __func__, cyc, nwait_en, hclk_tns, div);
+
+        /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+        if (nwait_en && div < 4)
+                div = 4;
+
+        switch (div) {
+        case 0:
+                val = 0;
+                break;
+
+        case 1:
+        case 2:
+        case 3:
+        case 4:
+                val = div - 1;
+                break;
+
+        case 5:
+        case 6:
+                val = 4;
+                break;
+
+        case 7:
+        case 8:
+                val = 5;
+                break;
+
+        case 9:
+        case 10:
+                val = 6;
+                break;
+
+        case 11:
+        case 12:
+        case 13:
+        case 14:
+                val = 7;
+                break;
+
+        default:
+                return -1;
+        }
+
+        *v |= val << 8;
+        return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+                             struct s3c2410_iobank_timing *bt)
+{
+        unsigned long hclk = cfg->freq.hclk_tns;
+        unsigned long res;
+        int ret;
+
+        res  = bt->bankcon;
+        res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+        /* tacp: 2,3,4,5 */
+        /* tcah: 0,1,2,4 */
+        /* tcoh: 0,1,2,4 */
+        /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+        /* tcos: 0,1,2,4 */
+        /* tacs: 0,1,2,4 */
+
+        ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+        ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+        ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+        ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+        if (ret)
+                return -EINVAL;
+
+        ret |= calc_tacp(bt->tacp, hclk, &res);
+        ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+        if (ret)
+                return -EINVAL;
+
+        bt->bankcon = res;
+        return 0;
+}
+
+static unsigned int tacc_tab[] = {
+        [0]     = 1,
+        [1]     = 2,
+        [2]     = 3,
+        [3]     = 4,
+        [4]     = 6,
+        [5]     = 9,
+        [6]     = 10,
+        [7]     = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+                             unsigned long val)
+{
+        val &= 7;
+        return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+                             unsigned long val)
+{
+        val &= 3;
+        return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+                              struct s3c2410_iobank_timing *bt)
+{
+        unsigned long bankcon = bt->bankcon;
+        unsigned long hclk = cfg->freq.hclk_tns;
+
+        bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+        bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+        bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+        bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+        bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+                              struct s3c_cpufreq_config *cfg,
+                              union s3c_iobank *iob)
+{
+        struct s3c2410_iobank_timing *bt = iob->io_2410;
+        unsigned long bankcon = bt->bankcon;
+        unsigned long hclk = cfg->freq.hclk_tns;
+        unsigned int tacs;
+        unsigned int tcos;
+        unsigned int tacc;
+        unsigned int tcoh;
+        unsigned int tcah;
+
+        seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+        tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+        tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+        tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+        tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+        tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+        seq_printf(seq,
+                   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+                   print_ns(bt->tacs),
+                   print_ns(bt->tcos),
+                   print_ns(bt->tacc),
+                   print_ns(bt->tcoh),
+                   print_ns(bt->tcah));
+
+        seq_printf(seq,
+                   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+                   print_ns(tacs),
+                   print_ns(tcos),
+                   print_ns(tacc),
+                   print_ns(tcoh),
+                   print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2410_iobank_timing *bt;
+        unsigned long bankcon;
+        int bank;
+        int ret;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bankcon = __raw_readl(bank_reg(bank));
+                bt = iot->bank[bank].io_2410;
+
+                if (!bt)
+                        continue;
+
+                bt->bankcon = bankcon;
+
+                ret = s3c2410_calc_bank(cfg, bt);
+                if (ret) {
+                        printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+                               __func__, bank);
+                        goto err;
+                }
+
+                s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+                               __func__, bank, bt->bankcon);
+        }
+
+        return 0;
+ err:
+        return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2410_iobank_timing *bt;
+        int bank;
+
+        /* set the io timings from the specifier */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2410;
+                if (!bt)
+                        continue;
+
+                __raw_writel(bt->bankcon, bank_reg(bank));
+        }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *timings)
+{
+        struct s3c2410_iobank_timing *bt;
+        unsigned long bankcon;
+        unsigned long bwscon;
+        int bank;
+
+        bwscon = __raw_readl(S3C2410_BWSCON);
+
+        /* look through all banks to see what is currently set. */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bankcon = __raw_readl(bank_reg(bank));
+
+                if (!bank_is_io(bankcon))
+                        continue;
+
+                s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+                               __func__, bank, bankcon);
+
+                bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+                if (!bt) {
+                        printk(KERN_ERR "%s: no memory for bank\n", __func__);
+                        return -ENOMEM;
+                }
+
+                /* find out in nWait is enabled for bank. */
+
+                if (bank != 0) {
+                        unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+                        if (tmp & S3C2410_BWSCON_WS)
+                                bt->nwait_en = 1;
+                }
+
+                timings->bank[bank].io_2410 = bt;
+                bt->bankcon = bankcon;
+
+                s3c2410_iotiming_getbank(cfg, bt);
+        }
+
+        s3c2410_print_timing("get", timings);
+        return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 000000000000..fd45e47facbc
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        unsigned int bank;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+                       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+                       print_ns(bt->idcy),
+                       print_ns(bt->wstrd),
+                       print_ns(bt->wstwr),
+                       print_ns(bt->wstoen),
+                       print_ns(bt->wstwen),
+                       print_ns(bt->wstbrd));
+        }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+        return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+                                unsigned int *err)
+{
+        unsigned int ret = to_div(hwtm, clk_tns);
+
+        if (ret > 0xf)
+                *err = -EINVAL;
+
+        return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+                             struct s3c2412_iobank_timing *bt)
+{
+        unsigned int hclk = cfg->freq.hclk_tns;
+        int err = 0;
+
+        bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+        bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+        bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+        bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+        bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+        bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+        return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+                              struct s3c_cpufreq_config *cfg,
+                              union s3c_iobank *iob)
+{
+        struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+        seq_printf(seq,
+                   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+                   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+                   print_ns(bt->idcy),
+                   print_ns(bt->wstrd),
+                   print_ns(bt->wstwr),
+                   print_ns(bt->wstoen),
+                   print_ns(bt->wstwen),
+                   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        int bank;
+        int ret;
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                ret = s3c2412_calc_bank(cfg, bt);
+                if (ret) {
+                        printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+                               __func__, bank);
+                        goto err;
+                }
+        }
+
+        return 0;
+ err:
+        return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                          struct s3c_iotimings *iot)
+{
+        struct s3c2412_iobank_timing *bt;
+        void __iomem *regs;
+        int bank;
+
+        /* set the io timings from the specifier */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                bt = iot->bank[bank].io_2412;
+                if (!bt)
+                        continue;
+
+                regs = S3C2412_SSMC_BANK(bank);
+
+                __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+                __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+                __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+                __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+                __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+                __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+        }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+        return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+                                     struct s3c2412_iobank_timing *bt,
+                                     unsigned int bank)
+{
+        unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+        void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+        bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+        bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+        bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+        bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+        bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+        if (bank < 2)
+                return true;
+
+        return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *timings)
+{
+        struct s3c2412_iobank_timing *bt;
+        u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+        unsigned int bank;
+
+        /* look through all banks to see what is currently set. */
+
+        for (bank = 0; bank < MAX_BANKS; bank++) {
+                if (!bank_is_io(bank, bankcfg))
+                        continue;
+
+                bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+                if (!bt) {
+                        printk(KERN_ERR "%s: no memory for bank\n", __func__);
+                        return -ENOMEM;
+                }
+
+                timings->bank[bank].io_2412 = bt;
+                s3c2412_iotiming_getbank(cfg, bt, bank);
+        }
+
+        s3c2412_print_timing("get", timings);
+        return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+        struct s3c_cpufreq_board *board = cfg->board;
+        u32 refresh;
+
+        WARN_ON(board == NULL);
+
+        /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+         * down to ensure that we do not overflow 32 bit numbers.
+         *
+         * This should work for HCLK up to 133MHz and refresh period up
+         * to 30usec.
+         */
+
+        refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+        refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+        refresh &= ((1 << 16) - 1);
+
+        s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+        __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 000000000000..ae2e6c604f27
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+        long diff = a - b;
+
+        return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned int hdiv, pdiv;
+        unsigned long hclk, fclk, armclk;
+        unsigned long hclk_max;
+
+        fclk = cfg->freq.fclk;
+        armclk = cfg->freq.armclk;
+        hclk_max = cfg->max.hclk;
+
+        s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+                     __func__, fclk, armclk, hclk_max);
+
+        if (armclk > fclk) {
+                printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+                armclk = fclk;
+        }
+
+        /* if we are in DVS, we need HCLK to be <= ARMCLK */
+        if (armclk < fclk && armclk < hclk_max)
+                hclk_max = armclk;
+
+        for (hdiv = 1; hdiv < 9; hdiv++) {
+                if (hdiv == 5 || hdiv == 7)
+                        hdiv++;
+
+                hclk = (fclk / hdiv);
+                if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+                        break;
+        }
+
+        s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+        if (hdiv > 8)
+                goto invalid;
+
+        pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+        if ((hclk / pdiv) > cfg->max.pclk)
+                pdiv++;
+
+        s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+        if (pdiv > 2)
+                goto invalid;
+
+        pdiv *= hdiv;
+
+        /* calculate a valid armclk */
+
+        if (armclk < hclk)
+                armclk = hclk;
+
+        /* if we're running armclk lower than fclk, this really means
+         * that the system should go into dvs mode, which means that
+         * armclk is connected to hclk. */
+        if (armclk < fclk) {
+                cfg->divs.dvs = 1;
+                armclk = hclk;
+        } else
+                cfg->divs.dvs = 0;
+
+        cfg->freq.armclk = armclk;
+
+        /* store the result, and then return */
+
+        cfg->divs.h_divisor = hdiv;
+        cfg->divs.p_divisor = pdiv;
+
+        return 0;
+
+ invalid:
+        return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+                           S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+        unsigned long clkdiv, camdiv;
+
+        s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+                     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+        clkdiv = __raw_readl(S3C2410_CLKDIVN);
+        camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+        clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+        camdiv &= ~CAMDIVN_HCLK_HALF;
+
+        switch (cfg->divs.h_divisor) {
+        case 1:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+                break;
+
+        case 2:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+                break;
+
+        case 6:
+                camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+        case 3:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+                break;
+
+        case 8:
+                camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+        case 4:
+                clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+                break;
+
+        default:
+                BUG();  /* we don't expect to get here. */
+        }
+
+        if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+                clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+        /* todo - set pclk. */
+
+        /* Write the divisors first with hclk intentionally halved so that
+         * when we write clkdiv we will under-frequency instead of over. We
+         * then make a short delay and remove the hclk halving if necessary.
+         */
+
+        __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+        __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+        ndelay(20);
+        __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+        clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+                        int *divs,
+                        struct cpufreq_frequency_table *table,
+                        size_t table_size)
+{
+        unsigned long freq;
+        int index = 0;
+        int div;
+
+        for (div = *divs; div > 0; div = *divs++) {
+                freq = fclk / div;
+
+                if (freq > max_hclk && div != 1)
+                        continue;
+
+                freq /= 1000; /* table is in kHz */
+                index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+                if (index < 0)
+                        break;
+        }
+
+        return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+                                     struct cpufreq_frequency_table *table,
+                                     size_t table_size)
+{
+        int ret;
+
+        WARN_ON(cfg->info == NULL);
+        WARN_ON(cfg->board == NULL);
+
+        ret = run_freq_for(cfg->info->max.hclk,
+                           cfg->info->max.fclk,
+                           hclk_divs,
+                           table, table_size);
+
+        s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+        return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+        .max            = {
+                .fclk   = 400000000,
+                .hclk   = 133333333,
+                .pclk   =  66666666,
+        },
+
+        .locktime_m     = 300,
+        .locktime_u     = 300,
+        .locktime_bits  = 16,
+
+        .name           = "s3c244x",
+        .calc_iotiming  = s3c2410_iotiming_calc,
+        .set_iotiming   = s3c2410_iotiming_set,
+        .get_iotiming   = s3c2410_iotiming_get,
+        .set_fvco       = s3c2410_set_fvco,
+
+        .set_refresh    = s3c2410_cpufreq_setrefresh,
+        .set_divs       = s3c2440_cpufreq_setdivs,
+        .calc_divs      = s3c2440_cpufreq_calcdivs,
+        .calc_freqtable = s3c2440_cpufreq_calctable,
+
+        .resume_clocks  = s3c244x_setup_clocks,
+
+        .debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+        xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+        hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+        fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+        armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+        if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+                printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+                return -ENOENT;
+        }
+
+        return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+        .add            = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass,
+                                      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+        .add            = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass,
+                                      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 000000000000..ff9443b233aa
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+        { .frequency = 75000000,        .index = PLLVAL(0x75, 3, 3),  },        /* FVco 600.000000 */
+        { .frequency = 80000000,        .index = PLLVAL(0x98, 4, 3),  },        /* FVco 640.000000 */
+        { .frequency = 90000000,        .index = PLLVAL(0x70, 2, 3),  },        /* FVco 720.000000 */
+        { .frequency = 100000000,       .index = PLLVAL(0x5c, 1, 3),  },        /* FVco 800.000000 */
+        { .frequency = 110000000,       .index = PLLVAL(0x66, 1, 3),  },        /* FVco 880.000000 */
+        { .frequency = 120000000,       .index = PLLVAL(0x70, 1, 3),  },        /* FVco 960.000000 */
+        { .frequency = 150000000,       .index = PLLVAL(0x75, 3, 2),  },        /* FVco 600.000000 */
+        { .frequency = 160000000,       .index = PLLVAL(0x98, 4, 2),  },        /* FVco 640.000000 */
+        { .frequency = 170000000,       .index = PLLVAL(0x4d, 1, 2),  },        /* FVco 680.000000 */
+        { .frequency = 180000000,       .index = PLLVAL(0x70, 2, 2),  },        /* FVco 720.000000 */
+        { .frequency = 190000000,       .index = PLLVAL(0x57, 1, 2),  },        /* FVco 760.000000 */
+        { .frequency = 200000000,       .index = PLLVAL(0x5c, 1, 2),  },        /* FVco 800.000000 */
+        { .frequency = 210000000,       .index = PLLVAL(0x84, 2, 2),  },        /* FVco 840.000000 */
+        { .frequency = 220000000,       .index = PLLVAL(0x66, 1, 2),  },        /* FVco 880.000000 */
+        { .frequency = 230000000,       .index = PLLVAL(0x6b, 1, 2),  },        /* FVco 920.000000 */
+        { .frequency = 240000000,       .index = PLLVAL(0x70, 1, 2),  },        /* FVco 960.000000 */
+        { .frequency = 300000000,       .index = PLLVAL(0x75, 3, 1),  },        /* FVco 600.000000 */
+        { .frequency = 310000000,       .index = PLLVAL(0x93, 4, 1),  },        /* FVco 620.000000 */
+        { .frequency = 320000000,       .index = PLLVAL(0x98, 4, 1),  },        /* FVco 640.000000 */
+        { .frequency = 330000000,       .index = PLLVAL(0x66, 2, 1),  },        /* FVco 660.000000 */
+        { .frequency = 340000000,       .index = PLLVAL(0x4d, 1, 1),  },        /* FVco 680.000000 */
+        { .frequency = 350000000,       .index = PLLVAL(0xa7, 4, 1),  },        /* FVco 700.000000 */
+        { .frequency = 360000000,       .index = PLLVAL(0x70, 2, 1),  },        /* FVco 720.000000 */
+        { .frequency = 370000000,       .index = PLLVAL(0xb1, 4, 1),  },        /* FVco 740.000000 */
+        { .frequency = 380000000,       .index = PLLVAL(0x57, 1, 1),  },        /* FVco 760.000000 */
+        { .frequency = 390000000,       .index = PLLVAL(0x7a, 2, 1),  },        /* FVco 780.000000 */
+        { .frequency = 400000000,       .index = PLLVAL(0x5c, 1, 1),  },        /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+
+        xtal_clk = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal_clk))
+                return PTR_ERR(xtal_clk);
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        if (xtal == 12000000) {
+                printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+                return s3c_plltab_register(s3c2440_plls_12,
+                                           ARRAY_SIZE(s3c2440_plls_12));
+        }
+
+        return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+        .add    = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+        .add    = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 000000000000..7679af13a94d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+        { .frequency = 78019200,        .index = PLLVAL(121, 5, 3),     },      /* FVco 624.153600 */
+        { .frequency = 84067200,        .index = PLLVAL(131, 5, 3),     },      /* FVco 672.537600 */
+        { .frequency = 90115200,        .index = PLLVAL(141, 5, 3),     },      /* FVco 720.921600 */
+        { .frequency = 96163200,        .index = PLLVAL(151, 5, 3),     },      /* FVco 769.305600 */
+        { .frequency = 102135600,       .index = PLLVAL(185, 6, 3),     },      /* FVco 817.084800 */
+        { .frequency = 108259200,       .index = PLLVAL(171, 5, 3),     },      /* FVco 866.073600 */
+        { .frequency = 114307200,       .index = PLLVAL(127, 3, 3),     },      /* FVco 914.457600 */
+        { .frequency = 120234240,       .index = PLLVAL(134, 3, 3),     },      /* FVco 961.873920 */
+        { .frequency = 126161280,       .index = PLLVAL(141, 3, 3),     },      /* FVco 1009.290240 */
+        { .frequency = 132088320,       .index = PLLVAL(148, 3, 3),     },      /* FVco 1056.706560 */
+        { .frequency = 138015360,       .index = PLLVAL(155, 3, 3),     },      /* FVco 1104.122880 */
+        { .frequency = 144789120,       .index = PLLVAL(163, 3, 3),     },      /* FVco 1158.312960 */
+        { .frequency = 150100363,       .index = PLLVAL(187, 9, 2),     },      /* FVco 600.401454 */
+        { .frequency = 156038400,       .index = PLLVAL(121, 5, 2),     },      /* FVco 624.153600 */
+        { .frequency = 162086400,       .index = PLLVAL(126, 5, 2),     },      /* FVco 648.345600 */
+        { .frequency = 168134400,       .index = PLLVAL(131, 5, 2),     },      /* FVco 672.537600 */
+        { .frequency = 174048000,       .index = PLLVAL(177, 7, 2),     },      /* FVco 696.192000 */
+        { .frequency = 180230400,       .index = PLLVAL(141, 5, 2),     },      /* FVco 720.921600 */
+        { .frequency = 186278400,       .index = PLLVAL(124, 4, 2),     },      /* FVco 745.113600 */
+        { .frequency = 192326400,       .index = PLLVAL(151, 5, 2),     },      /* FVco 769.305600 */
+        { .frequency = 198132480,       .index = PLLVAL(109, 3, 2),     },      /* FVco 792.529920 */
+        { .frequency = 204271200,       .index = PLLVAL(185, 6, 2),     },      /* FVco 817.084800 */
+        { .frequency = 210268800,       .index = PLLVAL(141, 4, 2),     },      /* FVco 841.075200 */
+        { .frequency = 216518400,       .index = PLLVAL(171, 5, 2),     },      /* FVco 866.073600 */
+        { .frequency = 222264000,       .index = PLLVAL(97, 2, 2),      },      /* FVco 889.056000 */
+        { .frequency = 228614400,       .index = PLLVAL(127, 3, 2),     },      /* FVco 914.457600 */
+        { .frequency = 234259200,       .index = PLLVAL(158, 4, 2),     },      /* FVco 937.036800 */
+        { .frequency = 240468480,       .index = PLLVAL(134, 3, 2),     },      /* FVco 961.873920 */
+        { .frequency = 246960000,       .index = PLLVAL(167, 4, 2),     },      /* FVco 987.840000 */
+        { .frequency = 252322560,       .index = PLLVAL(141, 3, 2),     },      /* FVco 1009.290240 */
+        { .frequency = 258249600,       .index = PLLVAL(114, 2, 2),     },      /* FVco 1032.998400 */
+        { .frequency = 264176640,       .index = PLLVAL(148, 3, 2),     },      /* FVco 1056.706560 */
+        { .frequency = 270950400,       .index = PLLVAL(120, 2, 2),     },      /* FVco 1083.801600 */
+        { .frequency = 276030720,       .index = PLLVAL(155, 3, 2),     },      /* FVco 1104.122880 */
+        { .frequency = 282240000,       .index = PLLVAL(92, 1, 2),      },      /* FVco 1128.960000 */
+        { .frequency = 289578240,       .index = PLLVAL(163, 3, 2),     },      /* FVco 1158.312960 */
+        { .frequency = 294235200,       .index = PLLVAL(131, 2, 2),     },      /* FVco 1176.940800 */
+        { .frequency = 300200727,       .index = PLLVAL(187, 9, 1),     },      /* FVco 600.401454 */
+        { .frequency = 306358690,       .index = PLLVAL(191, 9, 1),     },      /* FVco 612.717380 */
+        { .frequency = 312076800,       .index = PLLVAL(121, 5, 1),     },      /* FVco 624.153600 */
+        { .frequency = 318366720,       .index = PLLVAL(86, 3, 1),      },      /* FVco 636.733440 */
+        { .frequency = 324172800,       .index = PLLVAL(126, 5, 1),     },      /* FVco 648.345600 */
+        { .frequency = 330220800,       .index = PLLVAL(109, 4, 1),     },      /* FVco 660.441600 */
+        { .frequency = 336268800,       .index = PLLVAL(131, 5, 1),     },      /* FVco 672.537600 */
+        { .frequency = 342074880,       .index = PLLVAL(93, 3, 1),      },      /* FVco 684.149760 */
+        { .frequency = 348096000,       .index = PLLVAL(177, 7, 1),     },      /* FVco 696.192000 */
+        { .frequency = 355622400,       .index = PLLVAL(118, 4, 1),     },      /* FVco 711.244800 */
+        { .frequency = 360460800,       .index = PLLVAL(141, 5, 1),     },      /* FVco 720.921600 */
+        { .frequency = 366206400,       .index = PLLVAL(165, 6, 1),     },      /* FVco 732.412800 */
+        { .frequency = 372556800,       .index = PLLVAL(124, 4, 1),     },      /* FVco 745.113600 */
+        { .frequency = 378201600,       .index = PLLVAL(126, 4, 1),     },      /* FVco 756.403200 */
+        { .frequency = 384652800,       .index = PLLVAL(151, 5, 1),     },      /* FVco 769.305600 */
+        { .frequency = 391608000,       .index = PLLVAL(177, 6, 1),     },      /* FVco 783.216000 */
+        { .frequency = 396264960,       .index = PLLVAL(109, 3, 1),     },      /* FVco 792.529920 */
+        { .frequency = 402192000,       .index = PLLVAL(87, 2, 1),      },      /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+
+        xtal_clk = clk_get(NULL, "xtal");
+        if (IS_ERR(xtal_clk))
+                return PTR_ERR(xtal_clk);
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        if (xtal == 169344000) {
+                printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+                return s3c_plltab_register(s3c2440_plls_169344,
+                                           ARRAY_SIZE(s3c2440_plls_169344));
+        }
+
+        return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+        .add    = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+        return sysdev_driver_register(&s3c2440_sysclass,
+                                      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+        .add    = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+        return sysdev_driver_register(&s3c2442_sysclass,
+                                      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 000000000000..89fcf5308cf6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+                                        int enable)
+{
+
+        printk(KERN_INFO "%s(%d)\n", __func__, enable);
+        if (enable) {
+                s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+                s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+                s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+        } else {
+                s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+                s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+                s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+                s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+                s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+        }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a54..bcfa778614d8 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
         select S3C_GPIO_PULL_UPDOWN
         select S3C_GPIO_CFG_S3C24XX
         select S3C_GPIO_CFG_S3C64XX
+        select S3C_DEV_NAND
         select USB_ARCH_HAS_OHCI
         help
           Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd6268..b85b4359e935 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb40dd7..1322beb40dd7 100644
--- a/arch/arm/plat-s3c/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f9f987..febac1950d8e 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
         u32 div;
 
         if (parent < rate)
-                return rate;
+                return parent;
 
         div = (parent / rate) - 1;
         if (div > armclk_mask)
@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
         div = clk_get_rate(clk->parent) / rate;
 
         val = __raw_readl(S3C_CLK_DIV0);
-        val &= armclk_mask;
+        val &= ~armclk_mask;
         val |= (div - 1);
         __raw_writel(val, S3C_CLK_DIV0);
 
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 000000000000..a8a711c3c064
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#       Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+        bool
+        depends on ARCH_S5PC1XX
+        default y
+        select PLAT_S3C
+        select ARM_VIC
+        select NO_IOPORT
+        select ARCH_REQUIRE_GPIOLIB
+        select S3C_GPIO_TRACK
+        select S3C_GPIO_PULL_UPDOWN
+        help
+          Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+        bool
+        help
+          Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+        bool
+        help
+          Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+        bool
+        default y
+        help
+          Common setup code for i2c bus 0.
+
+          Note, currently since i2c0 is always compiled, this setup helper
+          is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+        bool
+        help
+          Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 000000000000..f1ecb2c37ee2
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y                           :=
+obj-m                           :=
+obj-n                           := dummy.o
+obj-                            :=
+
+# Core files
+
+obj-y                           += dev-uart.o
+obj-y                           += cpu.o
+obj-y                           += irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)  += s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 000000000000..715a7330794d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+        {
+                .idcode         = 0x43100000,
+                .idmask         = 0xfffff000,
+                .map_io         = s5pc100_map_io,
+                .init_clocks    = s5pc100_init_clocks,
+                .init_uarts     = s5pc100_init_uarts,
+                .init           = s5pc100_init,
+                .name           = name_s5pc100,
+        },
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+        {
+                .virtual        = (unsigned long)S5PC1XX_VA_CHIPID,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_CHIPID),
+                .length         = SZ_16,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_CLK,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_CLK),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_PWR,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_PWR),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)(S5PC1XX_VA_UART),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_UART),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(0),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(1),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_VIC(2),
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+                .length         = SZ_4K,
+                .type           = MT_DEVICE,
+        }, {
+                .virtual        = (unsigned long)S5PC1XX_VA_TIMER,
+                .pfn            = __phys_to_pfn(S5PC1XX_PA_TIMER),
+                .length         = SZ_256,
+                .type           = MT_DEVICE,
+        },
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+        unsigned long idcode;
+
+        /* initialise the io descriptors we need for initialisation */
+        iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+        iotable_init(mach_desc, size);
+
+        idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+        s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 000000000000..f749bc5407b5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+        [0] = {
+                .start  = S3C_PA_UART0,
+                .end    = S3C_PA_UART0 + 0x100,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX0,
+                .end    = IRQ_S3CUART_RX0,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX0,
+                .end    = IRQ_S3CUART_TX0,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR0,
+                .end    = IRQ_S3CUART_ERR0,
+                .flags  = IORESOURCE_IRQ,
+        }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART1,
+                .end   = S3C_PA_UART1 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX1,
+                .end    = IRQ_S3CUART_RX1,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX1,
+                .end    = IRQ_S3CUART_TX1,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR1,
+                .end    = IRQ_S3CUART_ERR1,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART2,
+                .end   = S3C_PA_UART2 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX2,
+                .end    = IRQ_S3CUART_RX2,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX2,
+                .end    = IRQ_S3CUART_TX2,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR2,
+                .end    = IRQ_S3CUART_ERR2,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+        [0] = {
+                .start = S3C_PA_UART3,
+                .end   = S3C_PA_UART3 + 0x100,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = IRQ_S3CUART_RX3,
+                .end    = IRQ_S3CUART_RX3,
+                .flags  = IORESOURCE_IRQ,
+        },
+        [2] = {
+                .start  = IRQ_S3CUART_TX3,
+                .end    = IRQ_S3CUART_TX3,
+                .flags  = IORESOURCE_IRQ,
+
+        },
+        [3] = {
+                .start  = IRQ_S3CUART_ERR3,
+                .end    = IRQ_S3CUART_ERR3,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+        [0] = {
+                .resources      = s5pc1xx_uart0_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart0_resource),
+        },
+        [1] = {
+                .resources      = s5pc1xx_uart1_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart1_resource),
+        },
+        [2] = {
+                .resources      = s5pc1xx_uart2_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart2_resource),
+        },
+        [3] = {
+                .resources      = s5pc1xx_uart3_resource,
+                .nr_resources   = ARRAY_SIZE(s5pc1xx_uart3_resource),
+        },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+        .id             = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+        .id             = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+        .id             = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+        .id             = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+        &s3c24xx_uart_device0,
+        &s3c24xx_uart_device1,
+        &s3c24xx_uart_device2,
+        &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 000000000000..f07d8c3b25d6
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET          (32)
+
+#define S3C_IRQ(x)              ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE           S3C_IRQ(0)
+#define S3C_VIC1_BASE           S3C_IRQ(32)
+#define S3C_VIC2_BASE           S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0       (16)
+#define IRQ_S3CUART_BASE1       (20)
+#define IRQ_S3CUART_BASE2       (24)
+#define IRQ_S3CUART_BASE3       (28)
+
+#define UART_IRQ_RXD            (0)
+#define UART_IRQ_ERR            (1)
+#define UART_IRQ_TXD            (2)
+#define UART_IRQ_MODEM          (3)
+
+#define IRQ_S3CUART_RX0         (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0         (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0        (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1         (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1         (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1        (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2         (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2         (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2        (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3         (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3         (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3        (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)     (S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)     (S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)     (S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0               S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1               S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2               S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3               S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4               S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5               S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6               S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7               S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8               S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9               S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10              S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11              S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12              S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13              S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14              S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15              S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31           S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF                S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA                S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0               S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1               S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0              S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1              S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2              S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3              S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4              S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER            S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT                 S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM           S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC             S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT             S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0             S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1             S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2             S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3             S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4             S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC              S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC              S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND             S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC                 S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC                 S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0               S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1               S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2               S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3               S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC                 S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0                S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1                S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2                S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA                S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0                S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1                S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX               S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX               S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST               S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG                 S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM                 S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0              S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1              S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2              S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI             S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI             S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0                S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1                S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2                S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3                S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR             S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0               S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1               S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2               S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG                S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D                  S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D                  S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER               S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI                S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1                S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC                 S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC               S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0                S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1                S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2                S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97                S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0                S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1                S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF               S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC                 S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN               S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC                  IRQ_PENDN
+#define IRQ_KEYPAD              S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG                  S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC                 S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX               S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX               S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ              S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ              S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE       (IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)             ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)             S3C_EINT(x)
+
+#define NR_IRQS                 (IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 000000000000..21afef1573e7
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK       ((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK       ((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK       ((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT      (16)
+#define S5P_PLL_PDIV_SHIFT      (8)
+#define S5P_PLL_SDIV_SHIFT      (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+                                            u32 pllcon)
+{
+        u32 mdiv, pdiv, sdiv;
+        u64 fvco = baseclk;
+
+        mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+        pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+        sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+        fvco *= mdiv;
+        do_div(fvco, (pdiv << sdiv));
+
+        return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 000000000000..75c8390cb827
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)               (S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK               S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK               S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK               S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK               S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON                S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON                S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON                S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON                S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0                S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1                S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2                S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3                S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0                S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1                S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2                S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3                S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4                S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT                 S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00             S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01             S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02             S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10             S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11             S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12             S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13             S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14             S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15             S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20             S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0               S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1               S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK               (0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT              (0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK               (0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT              (4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK               (0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT              (8)
+#define S5PC100_CLKSRC0_HPLL_MASK               (0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT              (12)
+#define S5PC100_CLKSRC0_AMMUX_MASK              (0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT             (16)
+#define S5PC100_CLKSRC0_HREF_MASK               (0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT              (20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK    (0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT   (24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK               (0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT              (0)
+#define S5PC100_CLKSRC1_SPI0_MASK               (0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT              (4)
+#define S5PC100_CLKSRC1_SPI1_MASK               (0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT              (8)
+#define S5PC100_CLKSRC1_SPI2_MASK               (0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT              (12)
+#define S5PC100_CLKSRC1_IRDA_MASK               (0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT              (16)
+#define S5PC100_CLKSRC1_UHOST_MASK              (0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT             (20)
+#define S5PC100_CLKSRC1_CLK48M_MASK             (0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT    (24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK               (0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT              (0)
+#define S5PC100_CLKSRC2_MMC1_MASK               (0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT              (4)
+#define S5PC100_CLKSRC2_MMC2_MASK               (0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT              (8)
+#define S5PC100_CLKSRC2_LCD_MASK                (0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT               (12)
+#define S5PC100_CLKSRC2_FIMC0_MASK              (0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT             (16)
+#define S5PC100_CLKSRC2_FIMC1_MASK              (0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT             (20)
+#define S5PC100_CLKSRC2_FIMC2_MASK              (0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT             (24)
+#define S5PC100_CLKSRC2_MIXER_MASK              (0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT             (28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK                (0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT               (0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK             (0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT    (4)
+#define S5PC100_CLKSRC3_I2SD2_MASK              (0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT             (8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK             (0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT    (12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK             (0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT    (16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK             (0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT    (20)
+#define S5PC100_CLKSRC3_SPDIF_MASK              (0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT             (24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK               (0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT              (0)
+#define S5PC100_CLKDIV0_ARM_MASK                (0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT               (4)
+#define S5PC100_CLKDIV0_D0_MASK         (0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT                (8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK             (0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT    (12)
+#define S5PC100_CLKDIV0_SECSS_MASK              (0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT             (16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK         (0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT                (0)
+#define S5PC100_CLKDIV1_MPLL_MASK               (0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT              (4)
+#define S5PC100_CLKDIV1_MPLL2_MASK              (0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT             (8)
+#define S5PC100_CLKDIV1_D1_MASK         (0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT                (12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK             (0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT    (16)
+#define S5PC100_CLKDIV1_ONENAND_MASK    (0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT   (20)
+#define S5PC100_CLKDIV1_CAM_MASK                (0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT               (24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK               (0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT              (0)
+#define S5PC100_CLKDIV2_SPI0_MASK               (0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT              (4)
+#define S5PC100_CLKDIV2_SPI1_MASK               (0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT              (8)
+#define S5PC100_CLKDIV2_SPI2_MASK               (0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT              (12)
+#define S5PC100_CLKDIV2_IRDA_MASK               (0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT              (16)
+#define S5PC100_CLKDIV2_UHOST_MASK              (0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT             (20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK               (0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT              (0)
+#define S5PC100_CLKDIV3_MMC1_MASK               (0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT              (4)
+#define S5PC100_CLKDIV3_MMC2_MASK               (0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT              (8)
+#define S5PC100_CLKDIV3_LCD_MASK                (0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT               (12)
+#define S5PC100_CLKDIV3_FIMC0_MASK              (0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT             (16)
+#define S5PC100_CLKDIV3_FIMC1_MASK              (0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT             (20)
+#define S5PC100_CLKDIV3_FIMC2_MASK              (0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT             (24)
+#define S5PC100_CLKDIV3_HDMI_MASK               (0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT              (28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK                (0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT               (0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK             (0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT    (4)
+#define S5PC100_CLKDIV4_I2SD2_MASK              (0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT             (8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK             (0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT    (12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK             (0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT    (16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK             (0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT    (20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC                (1<<0)
+#define S5PC100_CLKGATE_D00_TZIC                (1<<1)
+#define S5PC100_CLKGATE_D00_CFCON               (1<<2)
+#define S5PC100_CLKGATE_D00_MDMA                (1<<3)
+#define S5PC100_CLKGATE_D00_G2D         (1<<4)
+#define S5PC100_CLKGATE_D00_SECSS               (1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS               (1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC         (1<<0)
+#define S5PC100_CLKGATE_D01_SROMC               (1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND             (1<<2)
+#define S5PC100_CLKGATE_D01_NFCON               (1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM              (1<<4)
+#define S5PC100_CLKGATE_D01_EBI         (1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY              (1<<1)
+#define S5PC100_CLKGATE_D02_SDM         (1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0               (1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1               (1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST             (1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG              (1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF             (1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0              (1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1              (1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2              (1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD         (1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR             (1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0               (1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1               (1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2               (1<<4)
+#define S5PC100_CLKGATE_D11_JPEG                (1<<5)
+#define S5PC100_CLKGATE_D11_DSI         (1<<6)
+#define S5PC100_CLKGATE_D11_CSI         (1<<7)
+#define S5PC100_CLKGATE_D11_G3D         (1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV          (1<<0)
+#define S5PC100_CLKGATE_D12_VP          (1<<1)
+#define S5PC100_CLKGATE_D12_MIXER               (1<<2)
+#define S5PC100_CLKGATE_D12_HDMI                (1<<3)
+#define S5PC100_CLKGATE_D12_MFC         (1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID              (1<<0)
+#define S5PC100_CLKGATE_D13_GPIO                (1<<1)
+#define S5PC100_CLKGATE_D13_APC         (1<<2)
+#define S5PC100_CLKGATE_D13_IEC         (1<<3)
+#define S5PC100_CLKGATE_D13_PWM         (1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER    (1<<7)
+#define S5PC100_CLKGATE_D13_WDT         (1<<8)
+#define S5PC100_CLKGATE_D13_RTC         (1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0               (1<<0)
+#define S5PC100_CLKGATE_D14_UART1               (1<<1)
+#define S5PC100_CLKGATE_D14_UART2               (1<<2)
+#define S5PC100_CLKGATE_D14_UART3               (1<<3)
+#define S5PC100_CLKGATE_D14_IIC         (1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC    (1<<5)
+#define S5PC100_CLKGATE_D14_SPI0                (1<<6)
+#define S5PC100_CLKGATE_D14_SPI1                (1<<7)
+#define S5PC100_CLKGATE_D14_SPI2                (1<<8)
+#define S5PC100_CLKGATE_D14_IRDA                (1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0               (1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1               (1<<11)
+#define S5PC100_CLKGATE_D14_HSITX               (1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX               (1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0                (1<<0)
+#define S5PC100_CLKGATE_D15_IIS1                (1<<1)
+#define S5PC100_CLKGATE_D15_IIS2                (1<<2)
+#define S5PC100_CLKGATE_D15_AC97                (1<<3)
+#define S5PC100_CLKGATE_D15_PCM0                (1<<4)
+#define S5PC100_CLKGATE_D15_PCM1                (1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF               (1<<6)
+#define S5PC100_CLKGATE_D15_TSADC               (1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF               (1<<8)
+#define S5PC100_CLKGATE_D15_CG          (1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2              (1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2               (1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define S5PC1XX_CLKGATE_SCLK0_HPM               (1<<0)
+#define S5PC1XX_CLKGATE_SCLK0_PWI               (1<<1)
+#define S5PC100_CLKGATE_SCLK0_ONENAND   (1<<2)
+#define S5PC100_CLKGATE_SCLK0_UART              (1<<3)
+#define S5PC100_CLKGATE_SCLK0_SPI0              (1<<4)
+#define S5PC100_CLKGATE_SCLK0_SPI1              (1<<5)
+#define S5PC100_CLKGATE_SCLK0_SPI2              (1<<6)
+#define S5PC100_CLKGATE_SCLK0_SPI0_48   (1<<7)
+#define S5PC100_CLKGATE_SCLK0_SPI1_48   (1<<8)
+#define S5PC100_CLKGATE_SCLK0_SPI2_48   (1<<9)
+#define S5PC100_CLKGATE_SCLK0_IRDA              (1<<10)
+#define S5PC100_CLKGATE_SCLK0_USBHOST   (1<<11)
+#define S5PC100_CLKGATE_SCLK0_MMC0              (1<<12)
+#define S5PC100_CLKGATE_SCLK0_MMC1              (1<<13)
+#define S5PC100_CLKGATE_SCLK0_MMC2              (1<<14)
+#define S5PC100_CLKGATE_SCLK0_MMC0_48   (1<<15)
+#define S5PC100_CLKGATE_SCLK0_MMC1_48   (1<<16)
+#define S5PC100_CLKGATE_SCLK0_MMC2_48   (1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_SCLK1_LCD               (1<<0)
+#define S5PC100_CLKGATE_SCLK1_FIMC0             (1<<1)
+#define S5PC100_CLKGATE_SCLK1_FIMC1             (1<<2)
+#define S5PC100_CLKGATE_SCLK1_FIMC2             (1<<3)
+#define S5PC100_CLKGATE_SCLK1_TV54              (1<<4)
+#define S5PC100_CLKGATE_SCLK1_VDAC54    (1<<5)
+#define S5PC100_CLKGATE_SCLK1_MIXER             (1<<6)
+#define S5PC100_CLKGATE_SCLK1_HDMI              (1<<7)
+#define S5PC100_CLKGATE_SCLK1_AUDIO0    (1<<8)
+#define S5PC100_CLKGATE_SCLK1_AUDIO1    (1<<9)
+#define S5PC100_CLKGATE_SCLK1_AUDIO2    (1<<10)
+#define S5PC100_CLKGATE_SCLK1_SPDIF             (1<<11)
+#define S5PC100_CLKGATE_SCLK1_CAM               (1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG                 S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK        S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG              S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG                S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG               S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG    S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ                S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE              S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE              S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE              S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE    S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT                S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT     S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT    S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0                 S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1                 S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2                 S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3                 S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4                 S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5                 S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6                 S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7                 S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0     S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1     S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2     S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0    S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1    S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP              S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU                S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM                S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN     S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8     S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7     S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6     S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5     S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4     S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3     S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2     S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1     S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL     S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8   S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7   S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6   S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5   S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4   S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3   S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2   S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1   S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV  S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET         S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET             S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL                S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS              S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG             S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL             S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL   S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL   S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0   S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1   S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0   S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN   (~(3<<5))
+#define S5PC100_CFG_WFI_IDLE    (1<<5)
+#define S5PC100_CFG_WFI_STOP    (2<<5)
+#define S5PC100_CFG_WFI_SLEEP   (3<<5)
+
+#define S5PC100_OTHER_SYS_INT   24
+#define S5PC100_OTHER_STA_TYPE  23
+#define STA_TYPE_EXPON          0
+#define STA_TYPE_SFR            1
+
+#define S5PC100_PWR_STA_EXP_SCALE       0
+#define S5PC100_PWR_STA_CNT             4
+
+#define S5PC100_PWR_STABLE_COUNT        85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN        0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK     (1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN             (1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN  (1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN  (1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 000000000000..45e275131665
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 000000000000..80d6dd942cb8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+        generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+        s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg &= ~(1 << (irq - IRQ_TIMER0));
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;  /* mask out pending interrupts */
+        reg |= 1 << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+        u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+        reg &= 0x1f;
+        reg |= (1 << 5) << (irq - IRQ_TIMER0);
+        __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+        .name           = "s3c-timer",
+        .mask           = s3c_irq_timer_mask,
+        .unmask         = s3c_irq_timer_unmask,
+        .ack            = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+        void __iomem    *regs;
+        unsigned int     base_irq;
+        unsigned int     parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+        [0] = {
+                .regs           = (void *)S3C_VA_UART0,
+                .base_irq       = IRQ_S3CUART_BASE0,
+                .parent_irq     = IRQ_UART0,
+        },
+        [1] = {
+                .regs           = (void *)S3C_VA_UART1,
+                .base_irq       = IRQ_S3CUART_BASE1,
+                .parent_irq     = IRQ_UART1,
+        },
+        [2] = {
+                .regs           = (void *)S3C_VA_UART2,
+                .base_irq       = IRQ_S3CUART_BASE2,
+                .parent_irq     = IRQ_UART2,
+        },
+        [3] = {
+                .regs           = (void *)S3C_VA_UART3,
+                .base_irq       = IRQ_S3CUART_BASE3,
+                .parent_irq     = IRQ_UART3,
+        },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+        struct uart_irq *uirq = get_irq_chip_data(irq);
+        return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+        return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP   0x30
+#define S3C64XX_UINTSP  0x34
+#define S3C64XX_UINTM   0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg |= (1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+        u32 reg;
+
+        reg = __raw_readl(regs + S3C64XX_UINTM);
+        reg &= ~(1 << bit);
+        __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+        void __iomem *regs = s3c_irq_uart_base(irq);
+        unsigned int bit = s3c_irq_uart_bit(irq);
+
+        __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+        struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+        u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+        int base = uirq->base_irq;
+
+        if (pend & (1 << 0))
+                generic_handle_irq(base);
+        if (pend & (1 << 1))
+                generic_handle_irq(base + 1);
+        if (pend & (1 << 2))
+                generic_handle_irq(base + 2);
+        if (pend & (1 << 3))
+                generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+        .name           = "s3c-uart",
+        .mask           = s3c_irq_uart_mask,
+        .unmask         = s3c_irq_uart_unmask,
+        .mask_ack       = s3c_irq_uart_maskack,
+        .ack            = s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+        void __iomem *reg_base = uirq->regs;
+        unsigned int irq;
+        int offs;
+
+        /* mask all interrupts at the start. */
+        __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+        for (offs = 0; offs < 3; offs++) {
+                irq = uirq->base_irq + offs;
+
+                set_irq_chip(irq, &s3c_irq_uart);
+                set_irq_chip_data(irq, uirq);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+        int i;
+        int uart, irq;
+
+        printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+        /* initialise the pair of VICs */
+        for (i = 0; i < num; i++)
+                vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+                                vic_valid[i], 0);
+
+        /* add the timer sub-irqs */
+
+        set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+        set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+        set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+        set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+        set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+        for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+                set_irq_chip(irq, &s3c_irq_timer);
+                set_irq_handler(irq, handle_level_irq);
+                set_irq_flags(irq, IRQF_VALID);
+        }
+
+        for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+                s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 000000000000..6b24035172fa
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+        .name           = "ext_xtal",
+        .id             = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll   clk_mpll
+
+struct clk_sources {
+        unsigned int    nr_sources;
+        struct clk      **sources;
+};
+
+struct clksrc_clk {
+        struct clk              clk;
+        unsigned int            mask;
+        unsigned int            shift;
+
+        struct clk_sources      *sources;
+
+        unsigned int            divider_shift;
+        void __iomem            *reg_divider;
+        void __iomem            *reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+        clk->rate = rate;
+        return 1;
+}
+
+struct clk clk_27m = {
+        .name           = "clk_27m",
+        .id             = -1,
+        .rate           = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+        unsigned long flags;
+        u32 val;
+
+        /* can't rely on clock lock, this register has other usages */
+        local_irq_save(flags);
+
+        val = __raw_readl(S5PC1XX_CLK_SRC1);
+        if (enable)
+                val |= S5PC100_CLKSRC1_CLK48M_MASK;
+        else
+                val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+        __raw_writel(val, S5PC1XX_CLK_SRC1);
+        local_irq_restore(flags);
+
+        return 0;
+}
+
+struct clk clk_48m = {
+        .name           = "clk_48m",
+        .id             = -1,
+        .rate           = 48000000,
+        .enable         = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+        .name           = "clk_54m",
+        .id             = -1,
+        .rate           = 54000000,
+};
+
+struct clk clk_hpll = {
+        .name           = "hpll",
+        .id             = -1,
+};
+
+struct clk clk_hd0 = {
+        .name           = "hclkd0",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+        .name           = "pclkd0",
+        .id             = -1,
+        .rate           = 0,
+        .parent         = NULL,
+        .ctrlbit        = 0,
+        .set_rate       = clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+                                struct clk *clk,
+                                int enable)
+{
+        unsigned int ctrlbit = clk->ctrlbit;
+        u32 con;
+
+        con = __raw_readl(reg);
+
+        if (enable)
+                con |= ctrlbit;
+        else
+                con &= ~ctrlbit;
+
+        __raw_writel(con, reg);
+        return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+        return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+        {
+                .name           = "dsi",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_DSI,
+        }, {
+                .name           = "csi",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_CSI,
+        }, {
+                .name           = "ccan0",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_CCAN0,
+        }, {
+                .name           = "ccan1",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_CCAN1,
+        }, {
+                .name           = "keypad",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_KEYIF,
+        }, {
+                .name           = "hclkd2",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_clk_d20_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D20_HCLKD2,
+        }, {
+                .name           = "iis-d2",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_clk_d20_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D20_I2SD2,
+        }, {
+                .name           = "otg",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_USBOTG,
+        },
+};
+
+static struct clk init_clocks[] = {
+        /* System1 (D0_0) devices */
+        {
+                .name           = "intc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_INTC,
+        }, {
+                .name           = "tzic",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_TZIC,
+        }, {
+                .name           = "cf-ata",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_CFCON,
+        }, {
+                .name           = "mdma",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_MDMA,
+        }, {
+                .name           = "g2d",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_G2D,
+        }, {
+                .name           = "secss",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_SECSS,
+        }, {
+                .name           = "cssys",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d00_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D00_CSSYS,
+        },
+
+        /* Memory (D0_1) devices */
+        {
+                .name           = "dmc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_DMC,
+        }, {
+                .name           = "sromc",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_SROMC,
+        }, {
+                .name           = "onenand",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_ONENAND,
+        }, {
+                .name           = "nand",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_NFCON,
+        }, {
+                .name           = "intmem",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_INTMEM,
+        }, {
+                .name           = "ebi",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d01_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D01_EBI,
+        },
+
+        /* System2 (D0_2) devices */
+        {
+                .name           = "seckey",
+                .id             = -1,
+                .parent         = &clk_pd0,
+                .enable         = s5pc1xx_clk_d02_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D02_SECKEY,
+        }, {
+                .name           = "sdm",
+                .id             = -1,
+                .parent         = &clk_hd0,
+                .enable         = s5pc1xx_clk_d02_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D02_SDM,
+        },
+
+        /* File (D1_0) devices */
+        {
+                .name           = "pdma0",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_PDMA0,
+        }, {
+                .name           = "pdma1",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_PDMA1,
+        }, {
+                .name           = "usb-host",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_USBHOST,
+        }, {
+                .name           = "modem",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_MODEMIF,
+        }, {
+                .name           = "hsmmc",
+                .id             = 0,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC0,
+        }, {
+                .name           = "hsmmc",
+                .id             = 1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC1,
+        }, {
+                .name           = "hsmmc",
+                .id             = 2,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d10_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D10_HSMMC2,
+        },
+
+        /* Multimedia1 (D1_1) devices */
+        {
+                .name           = "lcd",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_LCD,
+        }, {
+                .name           = "rotator",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_ROTATOR,
+        }, {
+                .name           = "fimc",
+                .id             = 0,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC0,
+        }, {
+                .name           = "fimc",
+                .id             = 1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC1,
+        }, {
+                .name           = "fimc",
+                .id             = 2,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_FIMC2,
+        }, {
+                .name           = "jpeg",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_JPEG,
+        }, {
+                .name           = "g3d",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d11_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D11_G3D,
+        },
+
+        /* Multimedia2 (D1_2) devices */
+        {
+                .name           = "tv",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_TV,
+        }, {
+                .name           = "vp",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_VP,
+        }, {
+                .name           = "mixer",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_MIXER,
+        }, {
+                .name           = "hdmi",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_HDMI,
+        }, {
+                .name           = "mfc",
+                .id             = -1,
+                .parent         = &clk_h,
+                .enable         = s5pc1xx_clk_d12_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D12_MFC,
+        },
+
+        /* System (D1_3) devices */
+        {
+                .name           = "chipid",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_CHIPID,
+        }, {
+                .name           = "gpio",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_GPIO,
+        }, {
+                .name           = "apc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_APC,
+        }, {
+                .name           = "iec",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_IEC,
+        }, {
+                .name           = "timers",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_PWM,
+        }, {
+                .name           = "systimer",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_SYSTIMER,
+        }, {
+                .name           = "watchdog",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_WDT,
+        }, {
+                .name           = "rtc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d13_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D13_RTC,
+        },
+
+        /* Connectivity (D1_4) devices */
+        {
+                .name           = "uart",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART0,
+        }, {
+                .name           = "uart",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART1,
+        }, {
+                .name           = "uart",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART2,
+        }, {
+                .name           = "uart",
+                .id             = 3,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_UART3,
+        }, {
+                .name           = "i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_IIC,
+        }, {
+                .name           = "hdmi-i2c",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HDMI_IIC,
+        }, {
+                .name           = "spi",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI0,
+        }, {
+                .name           = "spi",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI1,
+        }, {
+                .name           = "spi",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_SPI2,
+        }, {
+                .name           = "irda",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_IRDA,
+        }, {
+                .name           = "hsitx",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HSITX,
+        }, {
+                .name           = "hsirx",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d14_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D14_HSIRX,
+        },
+
+        /* Audio (D1_5) devices */
+        {
+                .name           = "iis",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS0,
+        }, {
+                .name           = "iis",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS1,
+        }, {
+                .name           = "iis",
+                .id             = 2,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_IIS2,
+        }, {
+                .name           = "ac97",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_AC97,
+        }, {
+                .name           = "pcm",
+                .id             = 0,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_PCM0,
+        }, {
+                .name           = "pcm",
+                .id             = 1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_PCM1,
+        }, {
+                .name           = "spdif",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_SPDIF,
+        }, {
+                .name           = "adc",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_TSADC,
+        }, {
+                .name           = "keyif",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_KEYIF,
+        }, {
+                .name           = "cg",
+                .id             = -1,
+                .parent         = &clk_p,
+                .enable         = s5pc1xx_clk_d15_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_D15_CG,
+        },
+
+        /* Audio (D2_0) devices: all disabled */
+
+        /* Special Clocks 1 */
+        {
+                .name           = "sclk_hpm",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC1XX_CLKGATE_SCLK0_HPM,
+        }, {
+                .name           = "sclk_onenand",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_ONENAND,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 0,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI0_48,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 1,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI1_48,
+        }, {
+                .name           = "sclk_spi_48",
+                .id             = 2,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_SPI2_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 0,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC0_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 1,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC1_48,
+        }, {
+                .name           = "sclk_mmc_48",
+                .id             = 2,
+                .parent         = &clk_48m,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_MMC2_48,
+        },
+
+        /* Special Clocks 2 */
+        {
+                .name           = "sclk_tv_54",
+                .id             = -1,
+                .parent         = &clk_54m,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_TV54,
+        }, {
+                .name           = "sclk_vdac_54",
+                .id             = -1,
+                .parent         = &clk_54m,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_VDAC54,
+        }, {
+                .name           = "sclk_spdif",
+                .id             = -1,
+                .parent         = NULL,
+                .enable         = s5pc1xx_sclk1_ctrl,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK1_SPDIF,
+        },
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        clkp = init_clocks;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clkp = init_clocks_disable;
+        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+
+                (clkp->enable)(clkp, 0);
+        }
+
+        s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+        .name           = "fout_apll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+        [0] = &clk_fin_apll,
+        [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+        .sources        = clk_src_apll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+        .clk    = {
+                .name           = "mout_apll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_APLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_APLL_MASK,
+        .sources        = &clk_src_apll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+        .name           = "fout_epll",
+        .id             = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+        [0] = &clk_fin_epll,
+        [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+        .sources        = clk_src_epll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+        .clk    = {
+                .name           = "mout_epll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_EPLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_EPLL_MASK,
+        .sources        = &clk_src_epll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+        [0] = &clk_fin_mpll,
+        [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+        .sources        = clk_src_mpll_list,
+        .nr_sources     = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+        .clk = {
+                .name           = "mout_mpll",
+                .id             = -1,
+        },
+        .shift          = S5PC1XX_CLKSRC0_MPLL_SHIFT,
+        .mask           = S5PC1XX_CLKSRC0_MPLL_MASK,
+        .sources        = &clk_src_mpll,
+        .reg_source     = S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+        unsigned long clkdiv;
+
+        printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+        clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+        rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+        return rate;
+}
+
+static struct clk clk_dout_mpll = {
+        .name           = "dout_mpll",
+        .id             = -1,
+        .parent         = &clk_mout_mpll.clk,
+        .get_rate       = s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+        unsigned long rate = clk_get_rate(clk->parent);
+        unsigned long clkdiv;
+
+        printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+        clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+        rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+        return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+        .name           = "dout_mpll2",
+        .id             = -1,
+        .parent         = &clk_mout_mpll.clk,
+        .get_rate       = s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+        &clk_mout_epll.clk,
+        &clk_dout_mpll,
+        NULL,
+        NULL
+};
+
+static struct clk_sources clkset_uart = {
+        .sources        = clkset_uart_list,
+        .nr_sources     = ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+        return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        unsigned long rate = clk_get_rate(clk->parent);
+        u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+        clkdiv >>= sclk->divider_shift;
+        clkdiv &= 0xf;
+        clkdiv++;
+
+        rate /= clkdiv;
+        return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        void __iomem *reg = sclk->reg_divider;
+        unsigned int div;
+        u32 val;
+
+        rate = clk_round_rate(clk, rate);
+        div = clk_get_rate(clk->parent) / rate;
+        if (div > 16)
+                return -EINVAL;
+
+        val = __raw_readl(reg);
+        val &= ~(0xf << sclk->shift);
+        val |= (div - 1) << sclk->shift;
+        __raw_writel(val, reg);
+
+        return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+        struct clksrc_clk *sclk = to_clksrc(clk);
+        struct clk_sources *srcs = sclk->sources;
+        u32 clksrc = __raw_readl(sclk->reg_source);
+        int src_nr = -1;
+        int ptr;
+
+        for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+                if (srcs->sources[ptr] == parent) {
+                        src_nr = ptr;
+                        break;
+                }
+
+        if (src_nr >= 0) {
+                clksrc &= ~sclk->mask;
+                clksrc |= src_nr << sclk->shift;
+
+                __raw_writel(clksrc, sclk->reg_source);
+                return 0;
+        }
+
+        return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+                                              unsigned long rate)
+{
+        unsigned long parent_rate = clk_get_rate(clk->parent);
+        int div;
+
+        if (rate > parent_rate)
+                rate = parent_rate;
+        else {
+                div = rate / parent_rate;
+
+                if (div == 0)
+                        div = 1;
+                if (div > 16)
+                        div = 16;
+
+                rate = parent_rate / div;
+        }
+
+        return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+        .clk    = {
+                .name           = "uclk1",
+                .id             = -1,
+                .ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+                .enable         = s5pc1xx_sclk0_ctrl,
+                .set_parent     = s5pc1xx_setparent_clksrc,
+                .get_rate       = s5pc1xx_getrate_clksrc,
+                .set_rate       = s5pc1xx_setrate_clksrc,
+                .round_rate     = s5pc1xx_roundrate_clksrc,
+        },
+        .shift          = S5PC100_CLKSRC1_UART_SHIFT,
+        .mask           = S5PC100_CLKSRC1_UART_MASK,
+        .sources        = &clkset_uart,
+        .divider_shift  = S5PC100_CLKDIV2_UART_SHIFT,
+        .reg_divider    = S5PC1XX_CLK_DIV2,
+        .reg_source     = S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+        &clk_mout_apll,
+        &clk_mout_epll,
+        &clk_mout_mpll,
+        &clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+        struct clk_sources *srcs = clk->sources;
+        u32 clksrc = __raw_readl(clk->reg_source);
+
+        clksrc &= clk->mask;
+        clksrc >>= clk->shift;
+
+        if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+                printk(KERN_ERR "%s: bad source %d\n",
+                       clk->clk.name, clksrc);
+                return;
+        }
+
+        clk->clk.parent = srcs->sources[clksrc];
+
+        printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+               clk->clk.name, clk->clk.parent->name, clksrc,
+               clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+        struct clk *xtal_clk;
+        unsigned long xtal;
+        unsigned long armclk;
+        unsigned long hclkd0;
+        unsigned long hclk;
+        unsigned long pclkd0;
+        unsigned long pclk;
+        unsigned long apll;
+        unsigned long mpll;
+        unsigned long hpll;
+        unsigned long epll;
+        unsigned int ptr;
+        u32 clkdiv0, clkdiv1;
+
+        printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+        clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+        clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+        printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+                        __func__, clkdiv0, clkdiv1);
+
+        xtal_clk = clk_get(NULL, "xtal");
+        BUG_ON(IS_ERR(xtal_clk));
+
+        xtal = clk_get_rate(xtal_clk);
+        clk_put(xtal_clk);
+
+        printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+        apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+        mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+        epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+        hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+        printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+               apll, mpll, epll, hpll);
+
+        armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+        armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+        hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+        pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+        hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+        pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+        printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+               armclk, hclkd0, pclkd0, hclk, pclk);
+
+        clk_fout_apll.rate = apll;
+        clk_fout_mpll.rate = mpll;
+        clk_fout_epll.rate = epll;
+        clk_fout_apll.rate = apll;
+
+        clk_h.rate = hclk;
+        clk_p.rate = pclk;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+                s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+        &clk_ext_xtal_mux,
+        &clk_mout_epll.clk,
+        &clk_fout_epll,
+        &clk_mout_mpll.clk,
+        &clk_dout_mpll,
+        &clk_uart_uclk1.clk,
+        &clk_ext,
+        &clk_epll,
+        &clk_27m,
+        &clk_48m,
+        &clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+        struct clk *clkp;
+        int ret;
+        int ptr;
+
+        for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+                clkp = clks[ptr];
+                ret = s3c24xx_register_clock(clkp);
+                if (ret < 0) {
+                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
+                               clkp->name, ret);
+                }
+        }
+
+        clk_mpll.parent = &clk_mout_mpll.clk;
+        clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 000000000000..c58710884ceb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+        /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+        s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 000000000000..3d00c025fffb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+        /* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 000000000000..c8f3ca42f51d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+        /* Pin configuration would be needed */
+}
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec21..4fa9903b83cf 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
         mov     pc, lr
 ENDPROC(vfp_null_entry)
 
+        .align  2
 .LCvfp:
         .word   vfp_vector
 
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
         mov     pc, r9                  @ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
+        .align  2
 VFP_arch_address:
         .word   VFP_arch
 
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725dd..66dc2d03b7fc 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
 last_VFP_context_address:
         .word   last_VFP_context
 
-ENTRY(vfp_get_float)
-        add     pc, pc, r0, lsl #3
+        .macro  tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+        adr     \tmp, 1f
+        add     \tmp, \tmp, \base, lsl \shift
+        mov     pc, \tmp
+#else
+        add     pc, pc, \base, lsl \shift
         mov     r0, r0
+#endif
+1:
+        .endm
+
+ENTRY(vfp_get_float)
+        tbl_branch r0, r3, #3
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        mrc     p10, 0, r0, c\dr, c0, 0 @ fmrs  r0, s0
+1:      mrc     p10, 0, r0, c\dr, c0, 0 @ fmrs  r0, s0
         mov     pc, lr
-        mrc     p10, 0, r0, c\dr, c0, 4 @ fmrs  r0, s1
+        .org    1b + 8
+1:      mrc     p10, 0, r0, c\dr, c0, 4 @ fmrs  r0, s1
         mov     pc, lr
+        .org    1b + 8
         .endr
 ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
-        add     pc, pc, r1, lsl #3
-        mov     r0, r0
+        tbl_branch r1, r3, #3
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        mcr     p10, 0, r0, c\dr, c0, 0 @ fmsr  r0, s0
+1:      mcr     p10, 0, r0, c\dr, c0, 0 @ fmsr  r0, s0
         mov     pc, lr
-        mcr     p10, 0, r0, c\dr, c0, 4 @ fmsr  r0, s1
+        .org    1b + 8
+1:      mcr     p10, 0, r0, c\dr, c0, 4 @ fmsr  r0, s1
         mov     pc, lr
+        .org    1b + 8
         .endr
 ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
-        add     pc, pc, r0, lsl #3
-        mov     r0, r0
+        tbl_branch r0, r3, #3
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        fmrrd   r0, r1, d\dr
+1:      fmrrd   r0, r1, d\dr
         mov     pc, lr
+        .org    1b + 8
         .endr
 #ifdef CONFIG_VFPv3
         @ d16 - d31 registers
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        mrrc    p11, 3, r0, r1, c\dr    @ fmrrd r0, r1, d\dr
+1:      mrrc    p11, 3, r0, r1, c\dr    @ fmrrd r0, r1, d\dr
         mov     pc, lr
+        .org    1b + 8
         .endr
 #endif
 
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
 ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
-        add     pc, pc, r2, lsl #3
-        mov     r0, r0
+        tbl_branch r2, r3, #3
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        fmdrr   d\dr, r0, r1
+1:      fmdrr   d\dr, r0, r1
         mov     pc, lr
+        .org    1b + 8
         .endr
 #ifdef CONFIG_VFPv3
         @ d16 - d31 registers
         .irp    dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-        mcrr    p11, 3, r1, r2, c\dr    @ fmdrr r1, r2, d\dr
+1:      mcrr    p11, 3, r1, r2, c\dr    @ fmdrr r1, r2, d\dr
         mov     pc, lr
+        .org    1b + 8
         .endr
 #endif
 ENDPROC(vfp_put_double)
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 640821323943..92ecd8446ef8 100644
--- a/arch/avr32/include/asm/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,addr)                    \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb), pte);                    \
diff --git a/arch/blackfin/include/asm/context.S b/arch/blackfin/include/asm/context.S
index 16561ab18b38..f8a664f022b1 100644
--- a/arch/blackfin/include/asm/context.S
+++ b/arch/blackfin/include/asm/context.S
@@ -223,9 +223,10 @@
         [--sp] = RETN;
         [--sp] = RETE;
         [--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
-        r1.l = lo(IPEND);
-        r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+        p1.l = lo(IPEND);
+        p1.h = hi(IPEND);
+        r1 = [p1];
         [--sp] = r1;
 #else
         [--sp] = r0;    /* Skip IPEND as well. */
diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h
index 565b8136855e..fadfa82f93b2 100644
--- a/arch/blackfin/include/asm/cpu.h
+++ b/arch/blackfin/include/asm/cpu.h
@@ -32,7 +32,6 @@ struct blackfin_cpudata {
         struct task_struct *idle;
         unsigned int imemctl;
         unsigned int dmemctl;
-        unsigned long loops_per_jiffy;
         unsigned long dcache_invld_count;
         unsigned long icache_invld_count;
 };
diff --git a/arch/blackfin/include/asm/hardirq.h b/arch/blackfin/include/asm/hardirq.h
index cbd52f86bb9f..0b78b873df51 100644
--- a/arch/blackfin/include/asm/hardirq.h
+++ b/arch/blackfin/include/asm/hardirq.h
@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif
diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h
index d0be99be8308..a36ad8dac068 100644
--- a/arch/blackfin/include/asm/processor.h
+++ b/arch/blackfin/include/asm/processor.h
@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
         /* Always use CHIPID, to work around ANOMALY_05000234 */
         uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
-        /* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+        /*
+         * ANOMALY_05000364
          * Incorrect Revision Number in DSPID Register
          */
-        if (revid == 0)
-                switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
-                case 0x0010:
-                        revid = 0;
-                        break;
-                case 0x2796:
-                        revid = 1;
-                        break;
-                default:
-                        revid = 0xFFFF;
-                        break;
-                }
+        if (ANOMALY_05000364 &&
+            bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+                revid = 1;
 #endif
+
         return revid;
 }
 
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index e0bf8cc06907..9f9b82816652 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
         BUG_ON(src % 4);
         BUG_ON(size % 4);
 
-        /* Force a sync in case a previous config reset on this channel
-         * occurred.  This is needed so subsequent writes to DMA registers
-         * are not spuriously lost/corrupted.
-         */
-        __builtin_bfin_ssync();
-
         src_ch = 0;
         /* Find an avalible memDMA channel */
         while (1) {
-                if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-                        dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-                        src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-                } else {
+                if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
                         dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
                         src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+                } else {
+                        dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+                        src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
                 }
 
-                if (!bfin_read16(&src_ch->cfg)) {
+                if (!bfin_read16(&src_ch->cfg))
+                        break;
+                else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+                        bfin_write16(&src_ch->cfg, 0);
                         break;
-                } else {
-                        if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-                                bfin_write16(&src_ch->cfg, 0);
                 }
-
         }
 
+        /* Force a sync in case a previous config reset on this channel
+         * occurred.  This is needed so subsequent writes to DMA registers
+         * are not spuriously lost/corrupted.
+         */
+        __builtin_bfin_ssync();
+
         /* Destination */
         bfin_write32(&dst_ch->start_addr, dst);
         bfin_write16(&dst_ch->x_count, size >> 2);
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index beffa00a93c3..6b9446271371 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
                 *port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
                 gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+                gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+                                                & gpio_bank_saved[bank].dir;
                 gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
                 gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
                 gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
                 gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-                gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-                                                | gpio_bank_saved[bank].dir;
-
                 gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
         }
         AWA_DUMMY_READ(maska);
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index d6c067782e63..685f160a5a36 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
         }
 
         /* Cover L1 memory.  One 4M area for code and data each is enough.  */
-        if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-                d_tbl[i_d].addr = L1_DATA_A_START;
-                d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+        if (cpu == 0) {
+                if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+                        d_tbl[i_d].addr = L1_DATA_A_START;
+                        d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+                }
+                i_tbl[i_i].addr = L1_CODE_START;
+                i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
         }
-        i_tbl[i_i].addr = L1_CODE_START;
-        i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+        else {
+                if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+                        d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+                        d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+                }
+                i_tbl[i_i].addr = COREB_L1_CODE_START;
+                i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+        }
+#endif
         first_switched_dcplb = i_d;
         first_switched_icplb = i_i;
 
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 79cad0ac5892..9da36bab7ccb 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-        return in_mem_const_off(addr, 0, size, const_addr, const_size);
+        return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
         if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
                 return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-        if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
                 return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
         if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
                 return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-        if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
                 return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-        if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
                 return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
         if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
         if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
                 return 1;
 #ifdef COREB_L1_CODE_START
-        if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
                 return 1;
         if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
                 return 1;
-        if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
                 return 1;
-        if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+        if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
                 return 1;
 #endif
         if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index d76618db50df..6a387eec6b65 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -31,7 +31,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6136c33e919f..6225edae488e 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
         struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
         cpudata->idle = current;
-        cpudata->loops_per_jiffy = loops_per_jiffy;
         cpudata->imemctl = bfin_read_IMEM_CONTROL();
         cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -568,17 +567,23 @@ static __init void memory_setup(void)
 #  endif                                /* ANOMALY_05000263 */
 # endif                         /* CONFIG_ROMFS_FS */
 
-        memory_end -= mtd_size;
-
-        if (mtd_size == 0) {
-                console_init();
-                panic("Don't boot kernel without rootfs attached.");
+        /* Since the default MTD_UCLINUX has no magic number, we just blindly
+         * read 8 past the end of the kernel's image, and look at it.
+         * When no image is attached, mtd_size is set to a random number
+         * Do some basic sanity checks before operating on things
+         */
+        if (mtd_size == 0 || memory_end <= mtd_size) {
+                pr_emerg("Could not find valid ram mtd attached.\n");
+        } else {
+                memory_end -= mtd_size;
+
+                /* Relocate MTD image to the top of memory after the uncached memory area */
+                uclinux_ram_map.phys = memory_mtd_start = memory_end;
+                uclinux_ram_map.size = mtd_size;
+                pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+                        _end, mtd_size, (void *)memory_mtd_start);
+                dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
         }
-
-        /* Relocate MTD image to the top of memory after the uncached memory area */
-        uclinux_ram_map.phys = memory_mtd_start = memory_end;
-        uclinux_ram_map.size = mtd_size;
-        dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif                          /* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -868,13 +873,6 @@ void __init setup_arch(char **cmdline_p)
         else
                 printk(KERN_CONT "and Disabled\n");
 
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-        /* we need to initialize the Flashrom device here since we might
-         * do things with flash early on in the boot
-         */
-        flash_probe();
-#endif
-
         printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
         /* Newer parts mirror SWRST bits in SYSCR */
@@ -938,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
                                CPU, bfin_revid());
         }
 
-        /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-        if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-                panic("You can't run on this processor due to 05000448");
-
         printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
         printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1164,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
                 sclk/1000000, sclk%1000000);
         seq_printf(m, "bogomips\t: %lu.%02lu\n"
                 "Calibration\t: %lu loops\n",
-                (cpudata->loops_per_jiffy * HZ) / 500000,
-                ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
-                (cpudata->loops_per_jiffy * HZ));
+                (loops_per_jiffy * HZ) / 500000,
+                ((loops_per_jiffy * HZ) / 5000) % 100,
+                (loops_per_jiffy * HZ));
 
         /* Check Cache configutation */
         switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c
index a8f1329c15a4..3da60fb13ce4 100644
--- a/arch/blackfin/kernel/sys_bfin.c
+++ b/arch/blackfin/kernel/sys_bfin.c
@@ -29,7 +29,6 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 8a1caf2bb5b9..bf2b2d1f8ae5 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
         if (kernel_mode_regs(fp) || (current && !current->mm)) {
                 console_verbose();
                 oops_in_progress = 1;
-                if (strerror)
-                        verbose_printk(strerror);
         }
 
         if (sig != SIGTRAP) {
+                if (strerror)
+                        verbose_printk(strerror);
+
                 dump_bfin_process(fp);
                 dump_bfin_mem(fp);
                 show_regs(fp);
@@ -619,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
                 force_sig_info(sig, &info, current);
         }
 
-        if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+        if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+            (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+            (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
                 fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:
diff --git a/arch/blackfin/lib/lshrdi3.c b/arch/blackfin/lib/lshrdi3.c
index 84b9c5592220..e57bf6fbdf3f 100644
--- a/arch/blackfin/lib/lshrdi3.c
+++ b/arch/blackfin/lib/lshrdi3.c
@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-        SItype high, low;
-};
-
-typedef union {
-        struct DIstruct s;
-        DItype ll;
-} DIunion;
+#include "gcclib.h"
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index d9791106be9f..809be268e42d 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index 426e064062a0..753ed810e1c6 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index 0fb2ce5d840e..dbade93395eb 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f4867ce0c618..b09484f538f4 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
                 .type = "pcf8574_lcd",
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index b2f30f06b73e..2ad68cd10ae6 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 799a1d1fa890..75e563d3f9d4 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 0d63f7406168..c438ca89d8c9 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67f..ebd6cebc1fbc 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index a68ade8a3ca2..3d743ccaff6a 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
                 .irq = 39,
         },
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 70a0ad69c610..cd83db2fb1a1 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index a3789d7ccf8c..4062e24e759b 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c1f76dd2c4ed..bd656907b8c0 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
         {
                 I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-                .irq = IRQ_PF5,
+                .irq = IRQ_PG5,
         },
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 57c128cc3b64..e66aa131f517 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b86662fb9de7..e95d54f9af6c 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index c97acdf85cd3..451cf8a82a42 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index c536551eb4b8..999f239fe1a6 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 81f5b95cc361..dc0dd9b2bcef 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)      /* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
         {
                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
         },
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 18a4cd24f673..cd040fe0bc5c 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 94b8e277f09d..a5312b2d267e 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index a1b50878553f..fd5e8878b8c4 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index a63e15c86d90..5b96ea549a04 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE (0*1024)
 #define BFIN_DSUPBANKS  0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 5a4e7c7fd92c..fb1795d5be2a 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
         /* Single stepping only a single instruction, so clear the trace
          * bit here.  */
         r7 = syscfg;
-        bitclr (r7, 0);
+        bitclr (r7, SYSCFG_SSSTEP_P);
         syscfg = R7;
         jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
         if !cc jump _bfin_return_from_exception;
 
         r7 = syscfg;
-        bitclr (r7, 0);
+        bitclr (r7, SYSCFG_SSSTEP_P);   /* Turn off single step */
         syscfg = R7;
 
         /* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
         r6 = retx;
         [p5 + PDA_RETX] = r6;
 #endif
+        /* Save the state of single stepping */
         r6 = SYSCFG;
         [p5 + PDA_SYSCFG] = r6;
-        BITCLR(r6, 0);
+        /* Clear it while we handle the exception in IRQ5 mode */
+        BITCLR(r6, SYSCFG_SSSTEP_P);
         SYSCFG = r6;
 
         /* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
         /* Turn caches & protection off, to ensure we don't get any more
          * double exceptions
          */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
         raise 15;               /* raise evt15 to do signal or reschedule */
 4:
         r0 = syscfg;
-        bitclr(r0, 0);
+        bitclr(r0, SYSCFG_SSSTEP_P);            /* Turn off single step */
         syscfg = r0;
 5:
         rts;
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 61840059dfac..349ee3f5466a 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
                 return 0;
 
         msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+        if (!msg)
+                return -ENOMEM;
         INIT_LIST_HEAD(&msg->list);
         msg->call_struct.func = func;
         msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
         cpu_set(cpu, callmap);
 
         msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+        if (!msg)
+                return -ENOMEM;
         INIT_LIST_HEAD(&msg->list);
         msg->call_struct.func = func;
         msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
                 return;
 
         msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+        if (!msg)
+                return;
         memset(msg, 0, sizeof(msg));
         INIT_LIST_HEAD(&msg->list);
         msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
                 return;
 
         msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+        if (!msg)
+                return;
         memset(msg, 0, sizeof(msg));
         INIT_LIST_HEAD(&msg->list);
         msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
         unsigned int cpu;
 
         for_each_online_cpu(cpu)
-                bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+                bogosum += loops_per_jiffy;
 
         printk(KERN_INFO "SMP: Total of %d processors activated "
                "(%lu.%02lu BogoMIPS).\n",
diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h
index a1ba761d0573..6da975db112f 100644
--- a/arch/cris/include/asm/pgalloc.h
+++ b/arch/cris/include/asm/pgalloc.h
@@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         __free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,address)                 \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb), pte);                    \
diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c
index a79fbd87021b..2ad962c7e88e 100644
--- a/arch/cris/kernel/sys_cris.c
+++ b/arch/cris/kernel/sys_cris.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
index 971e6addb009..416d19a632f2 100644
--- a/arch/frv/include/asm/pgalloc.h
+++ b/arch/frv/include/asm/pgalloc.h
@@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         __free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,address)                 \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb),(pte));                   \
@@ -62,7 +62,7 @@ do {							\
  */
 #define pmd_alloc_one(mm, addr)         ({ BUG(); ((pmd_t *) 2); })
 #define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb,x)           do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)         do { } while (0)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 33233011b1c1..22c60692b551 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)              NULL
 #define pud_free(mm, x)                         do { } while (0)
-#define __pud_free_tlb(tlb, x)                  do { } while (0)
+#define __pud_free_tlb(tlb, x, address)         do { } while (0)
 
 /*
  * The "pud_xxx()" functions here are trivial for a folded two-level
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
index 0c26157cffa5..b6395ad1500a 100644
--- a/arch/ia64/include/asm/fpu.h
+++ b/arch/ia64/include/asm/fpu.h
@@ -6,6 +6,8 @@
  *      David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
+#include <linux/types.h>
+
 /* floating point status register: */
 #define FPSR_TRAP_VD    (1 << 0)        /* invalid op trap disabled */
 #define FPSR_TRAP_DD    (1 << 1)        /* denormal trap disabled */
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6fc216..96a8d927db28 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
         quicklist_free(0, NULL, pud);
 }
-#define __pud_free_tlb(tlb, pud)        pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address)       pud_free((tlb)->mm, pud)
 #endif /* CONFIG_PGTABLE_4 */
 
 static inline void
@@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
         quicklist_free(0, NULL, pmd);
 }
 
-#define __pmd_free_tlb(tlb, pmd)        pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)       pmd_free((tlb)->mm, pmd)
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@ static inline void check_pgt_cache(void)
         quicklist_trim(0, NULL, 25, 16);
 }
 
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)       pte_free((tlb)->mm, pte)
 
 #endif                          /* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39680c2..85d965cb19a0 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -236,22 +236,22 @@ do {							\
         __tlb_remove_tlb_entry(tlb, ptep, addr);        \
 } while (0)
 
-#define pte_free_tlb(tlb, ptep)                         \
+#define pte_free_tlb(tlb, ptep, address)                \
 do {                                                    \
         tlb->need_flush = 1;                            \
-        __pte_free_tlb(tlb, ptep);                      \
+        __pte_free_tlb(tlb, ptep, address);             \
 } while (0)
 
-#define pmd_free_tlb(tlb, ptep)                         \
+#define pmd_free_tlb(tlb, ptep, address)                \
 do {                                                    \
         tlb->need_flush = 1;                            \
-        __pmd_free_tlb(tlb, ptep);                      \
+        __pmd_free_tlb(tlb, ptep, address);             \
 } while (0)
 
-#define pud_free_tlb(tlb, pudp)                         \
+#define pud_free_tlb(tlb, pudp, address)                \
 do {                                                    \
         tlb->need_flush = 1;                            \
-        __pud_free_tlb(tlb, pudp);                      \
+        __pud_free_tlb(tlb, pudp, address);             \
 } while (0)
 
 #endif /* _ASM_IA64_TLB_H */
diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h
index e425227a418e..88afb54501e4 100644
--- a/arch/ia64/include/asm/xen/hypervisor.h
+++ b/arch/ia64/include/asm/xen/hypervisor.h
@@ -33,6 +33,7 @@
 #ifndef _ASM_IA64_XEN_HYPERVISOR_H
 #define _ASM_IA64_XEN_HYPERVISOR_H
 
+#include <linux/err.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>      /* to compile feature.c */
 #include <xen/features.h>               /* to comiple xen-netfront.c */
diff --git a/arch/ia64/kernel/dma-mapping.c b/arch/ia64/kernel/dma-mapping.c
index 086a2aeb0404..39a3cd0a4173 100644
--- a/arch/ia64/kernel/dma-mapping.c
+++ b/arch/ia64/kernel/dma-mapping.c
@@ -6,6 +6,14 @@ int iommu_detected __read_mostly;
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+}
+fs_initcall(dma_init);
+
 struct dma_map_ops *dma_get_ops(struct device *dev)
 {
         return dma_ops;
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 92c9689b7d97..9daa87fdb018 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -15,7 +15,6 @@
 #include <linux/mm.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/audit.h>
diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b909cdb..0fc736198979 100644
--- a/arch/m32r/include/asm/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
@@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         __free_page(pte);
 }
 
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, (pte))
 
 /*
  * allocating and freeing a pmd is trivial: the 1-entry pmd is
@@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 
 #define pmd_alloc_one(mm, addr)         ({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb, x)          do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)    do { } while (0)
 #define pgd_populate(mm, pmd, pte)      BUG()
 
 #define check_pgt_cache()       do { } while (0)
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index bf0abe9e1f73..98b8feb12ed8 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -19,7 +19,6 @@
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf6261df8..15ee4c74a9f0 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -54,7 +54,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
         __free_page(page);
 }
 
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+                                  unsigned long address)
 {
         pgtable_page_dtor(page);
         cache_page(kmap(page));
@@ -73,7 +74,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
         return free_pointer_table(pmd);
 }
 
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+                                 unsigned long address)
 {
         return free_pointer_table(pmd);
 }
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f143816..48d80d5a666f 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
         __free_page(page);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,addr)                    \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb), pte);                    \
@@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page
  * inside the pgd, so has no extra memory associated with it.
  */
 #define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb, x)          do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)    do { } while (0)
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d0bcf80a1136..8439598d4655 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -6,14 +6,16 @@ endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
 
 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 
 # Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
 
 # Work out HW multipler support.  This is icky.
 # 1. Spartan2 has no HW multiplers.
@@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
 # r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS         :=
 LDFLAGS_vmlinux :=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
 
-head-y          := arch/microblaze/kernel/head.o
-libs-y          += arch/microblaze/lib/ $(LIBGCC)
-core-y          += arch/microblaze/kernel/ arch/microblaze/mm/ \
-                   arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
 
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
 
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
-MMUEXT          := -nommu
+MMU := -nommu
 endif
-export  MMUEXT
+
+export MMU
 
 all: linux.bin
 
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 5c173424d074..7c3ec13b44d8 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -14,7 +14,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
-#include <asm/byteorder.h>
 #include <linux/mm.h>          /* Get struct page {...} */
 
 
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 59a757e46ba5..b0131da1387b 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
         __free_page(ptepage);
 }
 
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, (pte))
 
 #define pmd_populate(mm, pmd, pte)      (pmd_val(*(pmd)) = page_address(pte))
 
@@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
  */
 #define pmd_alloc_one(mm, address)      ({ BUG(); ((pmd_t *)2); })
 /*#define pmd_free(mm, x)                       do { } while (0)*/
-#define __pmd_free_tlb(tlb, x)          do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)    do { } while (0)
 #define pgd_populate(mm, pmd, pte)      BUG()
 
 extern int do_check_pgt_cache(int, int);
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4c57a586a989..cc3a4dfc3eaa 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /* Definitions for MicroBlaze. */
 #define _PAGE_GUARDED   0x001   /* G: page is guarded from prefetch */
+#define _PAGE_FILE      0x001   /* when !present: nonlinear file mapping */
 #define _PAGE_PRESENT   0x002   /* software: PTE contains a translation */
 #define _PAGE_NO_CACHE  0x004   /* I: caching is inhibited */
 #define _PAGE_WRITETHRU 0x008   /* W: caching is write-through */
@@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
 static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte)           { return 0; }
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 /* Encode and decode a nonlinear file mapping entry */
 #define PTE_FILE_MAX_BITS       29
 #define pte_to_pgoff(pte)       (pte_val(pte) >> 3)
-#define pgoff_to_pte(off)       ((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off)       ((pte_t) { ((off) << 3) | _PAGE_FILE })
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20f7b3a926e8..37e6f305a68e 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,6 +16,18 @@
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
 
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER            0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE        0x1 /* Start of node, full name */
+#define OF_DT_END_NODE          0x2 /* End node */
+#define OF_DT_PROP              0x3 /* Property: name off, size, content */
+#define OF_DT_NOP               0x4 /* nop */
+#define OF_DT_END               0x9
+
+#define OF_DT_VERSION           0x10
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
@@ -29,16 +41,6 @@
 #define of_prop_cmp(s1, s2)             strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)             strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER            0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE        0x1 /* Start of node, full name */
-#define OF_DT_END_NODE          0x2 /* End node */
-#define OF_DT_PROP              0x3 /* Property: name off, size, content */
-#define OF_DT_NOP               0x4 /* nop */
-#define OF_DT_END               0x9
-
-#define OF_DT_VERSION           0x10
-
 /*
  * This is what gets passed to the kernel by prom_init or kexec
  *
@@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
  */
 #include <linux/of.h>
 
+#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index c472d2801132..e8abd4a0349c 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_TLB_H
 #define _ASM_MICROBLAZE_TLB_H
 
-#define tlb_flush(tlb)  do {} while (0)
+#define tlb_flush(tlb)  flush_tlb_mm((tlb)->mm)
 
 #include <asm-generic/tlb.h>
 
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 65adad61e7e9..5431b4631a7a 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count);
 
 #define __put_user(x, ptr)                                              \
 ({                                                                      \
-        __typeof__(*(ptr)) __gu_val = x;                                \
+        __typeof__(*(ptr)) volatile __gu_val = (x);                     \
         long __gu_err = 0;                                              \
         switch (sizeof(__gu_val)) {                                     \
         case 1:                                                         \
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f4a5e19a20eb..d487729683de 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)           += microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)               += misc.o
 
-obj-y   += entry$(MMUEXT).o
+obj-y   += entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index 153f57c57b6d..c259786e7faa 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -22,7 +22,7 @@
 
 #define CI(c, p) { ci->c = PVR_##p(pvr); }
 #define err_printk(x) \
-        early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+        early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
 
 void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 450ca6bb828d..adb448f93d5f 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
 static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
-        early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+        early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
 
 void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a10bea119b94..c411c6757deb 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
         {"7.10.b", 0x09},
         {"7.10.c", 0x0a},
         {"7.10.d", 0x0b},
+        {"7.20.a", 0x0c},
+        {"7.20.b", 0x0d},
         /* FIXME There is no keycode defined in MBV for these versions */
         {"2.10.a", 0x10},
         {"3.00.a", 0x20},
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e568d6ec621b..e41c6ce2a7be 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,6 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/prom.h>           /* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
@@ -54,11 +55,19 @@ ENTRY(_start)
         andi    r1, r1, ~2
         mts     rmsr, r1
 
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
-        beqi    r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+   if it's in r7, we've got to save it away ASAP.
+   We ensure r7 points to a valid FDT, just in case the bootloader
+   is broken or non-existent */
+        beqi    r7, no_fdt_arg                  /* NULL pointer?  don't copy */
+        lw      r11, r0, r7                     /* Does r7 point to a */
+        rsubi   r11, r11, OF_DT_HEADER          /* valid FDT? */
+        beqi    r11, _prepare_copy_fdt
+        or      r7, r0, r0              /* clear R7 when not valid DTB */
+        bnei    r11, no_fdt_arg                 /* No - get out of here */
+_prepare_copy_fdt:
         or      r11, r0, r0 /* incremment */
-        ori     r4, r0, TOPHYS(_fdt_start) /* save bram context */
+        ori     r4, r0, TOPHYS(_fdt_start)
         ori     r3, r0, (0x4000 - 4)
 _copy_fdt:
         lw      r12, r7, r11 /* r12 = r7 + r11 */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 9d591cd74fc2..3288c9737671 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -74,6 +74,7 @@
 
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
+#include <asm/signal.h>
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
@@ -428,19 +429,9 @@ handle_unaligned_ex:
         mfs     r17, rbtr;      /* ESR[DS] set - return address in BTR */
         nop
 _no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
-        /* Check if unaligned address is last on a 4k page */
-                andi    r5, r4, 0xffc
-                xori    r5, r5, 0xffc
-                bnei    r5, _unaligned_ex2
-        _unaligned_ex1:
-                RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
-                bri     unaligned_data_trap
-
-        _unaligned_ex2:
+        /* jump to high level unaligned handler */
+        RESTORE_STATE;
+        bri     unaligned_data_trap
 #endif
         andi    r6, r3, 0x3E0; /* Mask and extract the register operand */
         srl     r6, r6; /* r6 >> 5 */
@@ -450,45 +441,6 @@ _no_delayslot:
         srl     r6, r6;
         /* Store the register operand in a temporary location */
         sbi     r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
-        /* Get physical address */
-        /* If we are faulting a kernel address, we have to use the
-         * kernel page tables.
-         */
-        ori     r5, r0, CONFIG_KERNEL_START
-        cmpu    r5, r4, r5
-        bgti    r5, _unaligned_ex3
-        ori     r5, r0, swapper_pg_dir
-        bri     _unaligned_ex4
-
-        /* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
-        addi    r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
-        lwi     r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
-        tophys(r5,r5)
-        BSRLI(r6,r4,20)                 /* Create L1 (pgdir/pmd) address */
-        andi    r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
-        or      r5, r5, r6
-        lwi     r6, r5, 0               /* Get L1 entry */
-        andi    r5, r6, 0xfffff000      /* Extract L2 (pte) base address. */
-        beqi    r5, _unaligned_ex1      /* Bail if no table */
-
-        tophys(r5,r5)
-        BSRLI(r6,r4,10)                 /* Compute PTE address */
-        andi    r6, r6, 0xffc
-        andi    r5, r5, 0xfffff003
-        or      r5, r5, r6
-        lwi     r5, r5, 0               /* Get Linux PTE */
-
-        andi    r6, r5, _PAGE_PRESENT
-        beqi    r6, _unaligned_ex1      /* Bail if no page */
-
-        andi    r5, r5, 0xfffff000      /* Extract RPN */
-        andi    r4, r4, 0x00000fff      /* Extract offset */
-        or      r4, r4, r5              /* Create physical address */
-#endif /* CONFIG_MMU */
 
         andi    r6, r3, 0x400; /* Extract ESR[S] */
         bnei    r6, ex_sw;
@@ -959,15 +911,15 @@ _unaligned_data_exception:
         andi    r6, r3, 0x800;  /* Extract ESR[W] - delay slot */
 ex_lw_vm:
         beqid   r6, ex_lhw_vm;
-        lbui    r5, r4, 0;      /* Exception address in r4 - delay slot */
+load1:  lbui    r5, r4, 0;      /* Exception address in r4 - delay slot */
 /* Load a word, byte-by-byte from destination address and save it in tmp space*/
         la      r6, r0, ex_tmp_data_loc_0;
         sbi     r5, r6, 0;
-        lbui    r5, r4, 1;
+load2:  lbui    r5, r4, 1;
         sbi     r5, r6, 1;
-        lbui    r5, r4, 2;
+load3:  lbui    r5, r4, 2;
         sbi     r5, r6, 2;
-        lbui    r5, r4, 3;
+load4:  lbui    r5, r4, 3;
         sbi     r5, r6, 3;
         brid    ex_lw_tail_vm;
 /* Get the destination register value into r3 - delay slot */
@@ -977,7 +929,7 @@ ex_lhw_vm:
          * save it in tmp space */
         la      r6, r0, ex_tmp_data_loc_0;
         sbi     r5, r6, 0;
-        lbui    r5, r4, 1;
+load5:  lbui    r5, r4, 1;
         sbi     r5, r6, 1;
         lhui    r3, r6, 0;      /* Get the destination register value into r3 */
 ex_lw_tail_vm:
@@ -996,22 +948,53 @@ ex_sw_tail_vm:
         swi     r3, r5, 0;      /* Get the word - delay slot */
         /* Store the word, byte-by-byte into destination address */
         lbui    r3, r5, 0;
-        sbi     r3, r4, 0;
+store1: sbi     r3, r4, 0;
         lbui    r3, r5, 1;
-        sbi     r3, r4, 1;
+store2: sbi     r3, r4, 1;
         lbui    r3, r5, 2;
-        sbi     r3, r4, 2;
+store3: sbi     r3, r4, 2;
         lbui    r3, r5, 3;
         brid    ret_from_exc;
-        sbi     r3, r4, 3;      /* Delay slot */
+store4: sbi     r3, r4, 3;      /* Delay slot */
 ex_shw_vm:
         /* Store the lower half-word, byte-by-byte into destination address */
         lbui    r3, r5, 2;
-        sbi     r3, r4, 0;
+store5: sbi     r3, r4, 0;
         lbui    r3, r5, 3;
         brid    ret_from_exc;
-        sbi     r3, r4, 1;      /* Delay slot */
+store6: sbi     r3, r4, 1;      /* Delay slot */
 ex_sw_end_vm:                   /* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+        ori     r5, r7, 0 /* setup pointer to pt_regs */
+        lwi     r6, r7, PT_PC; /* faulting address is one instruction above */
+        addik   r6, r6, -4 /* for finding proper fixup */
+        swi     r6, r7, PT_PC; /* a save back it to PT_PC */
+        addik   r7, r0, SIGSEGV
+        /* call bad_page_fault for finding aligned fixup, fixup address is saved
+         * in PT_PC which is used as return address from exception */
+        la      r15, r0, ret_from_exc-8 /* setup return address */
+        brid    bad_page_fault
+        nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+        .word   load1,ex_unaligned_fixup;
+        .word   load2,ex_unaligned_fixup;
+        .word   load3,ex_unaligned_fixup;
+        .word   load4,ex_unaligned_fixup;
+        .word   load5,ex_unaligned_fixup;
+        .word   store1,ex_unaligned_fixup;
+        .word   store2,ex_unaligned_fixup;
+        .word   store3,ex_unaligned_fixup;
+        .word   store4,ex_unaligned_fixup;
+        .word   store5,ex_unaligned_fixup;
+        .word   store6,ex_unaligned_fixup;
+.previous;
 .end _unaligned_data_exception
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 51414171326f..5a45b1adfef1 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
         Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
         Elf32_Sym *sym;
         unsigned long int *location;
-        unsigned long int locoffs;
         unsigned long int value;
 #if __GNUC__ < 4
         unsigned long int old_value;
@@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
                         break;
 
                 case R_MICROBLAZE_64_PCREL:
-                        locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+                        old_value = (location[0] & 0xFFFF) << 16 |
                                 (location[1] & 0xFFFF);
-                        value -= (unsigned long int)(location) + 4 +
-                                locoffs;
+                        value -= old_value;
+#endif
+                        value -= (unsigned long int)(location) + 4;
                         location[0] = (location[0] & 0xFFFF0000) |
                                         (value >> 16);
                         location[1] = (location[1] & 0xFFFF0000) |
@@ -125,6 +126,14 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
                                 value);
                         break;
 
+                case R_MICROBLAZE_32_PCREL_LO:
+                        pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+                        break;
+
+                case R_MICROBLAZE_64_NONE:
+                        pr_debug("R_MICROBLAZE_NONE\n");
+                        break;
+
                 case R_MICROBLAZE_NONE:
                         pr_debug("R_MICROBLAZE_NONE\n");
                         break;
@@ -133,7 +142,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
                         printk(KERN_ERR "module %s: "
                                 "Unknown relocation: %u\n",
                                 module->name,
-                                ELF32_R_TYPE(rela->r_info));
+                                ELF32_R_TYPE(rela[i].r_info));
                         return -ENOEXEC;
                 }
         }
diff --git a/arch/microblaze/kernel/ptrace.c b/arch/microblaze/kernel/ptrace.c
index b86aa623e36d..53ff39af6a5c 100644
--- a/arch/microblaze/kernel/ptrace.c
+++ b/arch/microblaze/kernel/ptrace.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8709bea09604..2a97bf513b64 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -138,8 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
         setup_early_printk(NULL);
 #endif
 
-        early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
-        printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+        early_printk("Ramdisk addr 0x%08x, ", ram);
+        if (fdt)
+                early_printk("FDT at 0x%08x\n", fdt);
+        else
+                early_printk("Compiled-in FDT at 0x%08x\n",
+                                        (unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
         early_printk("Found romfs @ 0x%08x (0x%08x)\n",
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index 493819c25fba..1c80e4fc40ce 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index 8c9ebac5da10..b96f1682bb24 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
@@ -34,105 +33,6 @@
 #include <linux/unistd.h>
 
 #include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage long
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
-        int version, ret;
-
-        version = call >> 16; /* hack for backward compatibility */
-        call &= 0xffff;
-
-        ret = -EINVAL;
-        switch (call) {
-        case SEMOP:
-                ret = sys_semop(first, (struct sembuf *)ptr, second);
-                break;
-        case SEMGET:
-                ret = sys_semget(first, second, third);
-                break;
-        case SEMCTL:
-        {
-                union semun fourth;
-
-                if (!ptr)
-                        break;
-                ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-                                || (get_user(fourth.__pad, (void **)ptr)) ;
-                if (ret)
-                        break;
-                ret = sys_semctl(first, second, third, fourth);
-                break;
-        }
-        case MSGSND:
-                ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
-                break;
-        case MSGRCV:
-                switch (version) {
-                case 0: {
-                        struct ipc_kludge tmp;
-
-                        if (!ptr)
-                                break;
-                        ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
-                                ? 0 : -EFAULT) || copy_from_user(&tmp,
-                                (struct ipc_kludge *) ptr, sizeof(tmp));
-                        if (ret)
-                                break;
-                        ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
-                                        third);
-                        break;
-                        }
-                default:
-                        ret = sys_msgrcv(first, (struct msgbuf *) ptr,
-                                        second, fifth, third);
-                        break;
-                }
-                break;
-        case MSGGET:
-                ret = sys_msgget((key_t) first, second);
-                break;
-        case MSGCTL:
-                ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
-                break;
-        case SHMAT:
-                switch (version) {
-                default: {
-                        ulong raddr;
-                        ret = access_ok(VERIFY_WRITE, (ulong *) third,
-                                        sizeof(ulong)) ? 0 : -EFAULT;
-                        if (ret)
-                                break;
-                        ret = do_shmat(first, (char *) ptr, second, &raddr);
-                        if (ret)
-                                break;
-                        ret = put_user(raddr, (ulong *) third);
-                        break;
-                        }
-                case 1: /* iBCS2 emulator entry point */
-                        if (!segment_eq(get_fs(), get_ds()))
-                                break;
-                        ret = do_shmat(first, (char *) ptr, second,
-                                        (ulong *) third);
-                        break;
-                }
-                break;
-        case SHMDT:
-                ret = sys_shmdt((char *)ptr);
-                break;
-        case SHMGET:
-                ret = sys_shmget(first, second, third);
-                break;
-        case SHMCTL:
-                ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
-                break;
-        }
-        return ret;
-}
 
 asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 31b32a6c5f4e..216db817beb6 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -121,7 +121,7 @@ ENTRY(sys_call_table)
         .long sys_wait4
         .long sys_swapoff               /* 115 */
         .long sys_sysinfo
-        .long sys_ipc
+        .long sys_ni_syscall            /* old sys_ipc */
         .long sys_fsync
         .long sys_ni_syscall            /* sys_sigreturn_wrapper */
         .long sys_clone         /* 120 */
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 956607a63f4c..d9d249a66ff2 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs)
  * It is called from do_page_fault above and from some of the procedures
  * in traps.c.
  */
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 {
         const struct exception_table_entry *fixup;
 /* MS: no context */
@@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
         }
 #endif /* CONFIG_KGDB */
 
-        if (in_atomic() || mm == NULL) {
-                /* FIXME */
-                if (kernel_mode(regs)) {
-                        printk(KERN_EMERG
-                                "Page fault in kernel mode - Oooou!!! pid %d\n",
-                                current->pid);
-                        _exception(SIGSEGV, regs, code, address);
-                        return;
-                }
+        if (in_atomic() || !mm) {
+                if (kernel_mode(regs))
+                        goto bad_area_nosemaphore;
+
                 /* in_atomic() in user mode is really bad,
                    as is current->mm == NULL. */
                 printk(KERN_EMERG "Page fault in user mode with "
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 1275831dda29..3738f4b48cbd 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -98,23 +98,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         __free_pages(pte, PTE_ORDER);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,address)                 \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb), pte);                    \
 } while (0)
 
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb, x)          do { } while (0)
-
-#endif
-
 #ifdef CONFIG_64BIT
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -132,7 +121,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
         free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
-#define __pmd_free_tlb(tlb, x)  pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr)    pmd_free((tlb)->mm, x)
 
 #endif
 
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index c4f9ac17474a..32644b4a0714 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -22,7 +22,6 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/user.h>
 #include <linux/security.h>
 
diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c
index 471c09aa1614..8c2834f5919d 100644
--- a/arch/mips/mm/hugetlbpage.c
+++ b/arch/mips/mm/hugetlbpage.c
@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
index ec057e1bd4cf..a19f11327cd8 100644
--- a/arch/mn10300/include/asm/pgalloc.h
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 }
 
 
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
 
 #endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/kernel/ptrace.c b/arch/mn10300/kernel/ptrace.c
index e143339ad28e..cf847dabc1bd 100644
--- a/arch/mn10300/kernel/ptrace.c
+++ b/arch/mn10300/kernel/ptrace.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 9f7572a0f578..feb2f2e810db 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c
index bca5a84dc72c..3e52a1054327 100644
--- a/arch/mn10300/kernel/sys_mn10300.c
+++ b/arch/mn10300/kernel/sys_mn10300.c
@@ -13,7 +13,6 @@
 #include <linux/syscalls.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
@@ -21,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/syscalls.h>
 #include <linux/tty.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c
index 0dfdc5001124..91365adba4f5 100644
--- a/arch/mn10300/kernel/traps.c
+++ b/arch/mn10300/kernel/traps.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index c96ba3da95ac..f4aa07934654 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -107,7 +107,7 @@ SECTIONS
   __init_end = .;
   /* freed after init ends here */
 
-  BSS(4)
+  BSS_SECTION(0, PAGE_SIZE, 4)
 
   _end = . ;
 
diff --git a/arch/mn10300/mm/fault.c b/arch/mn10300/mm/fault.c
index a62e1e138bc1..53bb17d0f068 100644
--- a/arch/mn10300/mm/fault.c
+++ b/arch/mn10300/mm/fault.c
@@ -20,7 +20,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/vt_kern.h>              /* For unblank_screen() */
diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c
index 94c4a4358065..30016251f658 100644
--- a/arch/mn10300/mm/misalignment.c
+++ b/arch/mn10300/mm/misalignment.c
@@ -17,7 +17,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/spinlock.h>
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
index 383b1db310ee..07924903989e 100644
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -21,7 +21,7 @@ do {	if (!(tlb)->fullmm)	\
 
 #include <asm-generic/tlb.h>
 
-#define __pmd_free_tlb(tlb, pmd)        pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
 
 #endif
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 224b4f0704b8..4f06dbc0d27e 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -410,7 +410,7 @@
                 bus-range = <0 0>;
                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-                          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+                          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
                 sleep = <&pmc 0x00010000>;
                 clock-frequency = <66666666>;
                 #interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 474ea2fa3f86..aabf3437cadf 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -394,7 +394,7 @@
                 bus-range = <0 0>;
                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-                          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+                          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
                 sleep = <&pmc 0x00010000>;
                 clock-frequency = <66666666>;
                 #interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index d4838af8d379..9b1da864d890 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -424,7 +424,7 @@
                 bus-range = <0x0 0x0>;
                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-                          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+                          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
                 sleep = <&pmc 0x00010000>;
                 clock-frequency = <66666666>;
                 #interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a680165292f2..9e4ce99e1613 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -501,6 +501,10 @@
                                 reg = <0x6>;
                                 device_type = "ethernet-phy";
                         };
+                        tbi-phy@11 {
+                                reg = <0x11>;
+                                device_type = "tbi-phy";
+                        };
                 };
                 mdio@3520 {
                         #address-cells = <1>;
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 278939713775..a2df0635b6de 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -599,6 +627,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -847,6 +882,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -960,6 +981,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index bf0853f29f31..93ebd443a18f 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,25 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr  3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y
 CONFIG_KMETER1=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -194,6 +219,8 @@ CONFIG_IPIC=y
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -331,7 +364,10 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +378,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -362,6 +398,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +468,11 @@ CONFIG_MTD_PHRAM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=y
@@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG is not set
 # CONFIG_MTD_UBI_DEBUG_PARANOID is not set
 # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
@@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -517,11 +564,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
@@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_WAN=y
 CONFIG_HDLC=y
 # CONFIG_HDLC_RAW is not set
@@ -543,8 +594,6 @@ CONFIG_HDLC=y
 #
 # X.25/LAPB support is disabled
 #
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
 # CONFIG_DLCI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
@@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
@@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -736,9 +780,12 @@ CONFIG_UIO=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -748,6 +795,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -772,10 +824,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -815,7 +866,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -859,11 +911,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c5c0fe71a438..ff33a7db2eab 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +739,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1002,6 +1035,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index af4952feba36..76237d466702 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -775,6 +800,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1063,6 +1096,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 8c8f660b4fc7..e0e36a113409 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -586,6 +611,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -848,6 +880,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 227dbba76795..4f27d4548223 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -590,6 +615,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -609,11 +636,13 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -881,6 +914,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 24ee7fcac87e..648dac0c9d8d 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 7f39543205a9..bf6deb831dc3 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -965,6 +982,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 1cd1fcac22c8..3236c47712c2 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -527,6 +555,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -785,6 +820,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index ce5177393a0d..8c5299d74813 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -381,7 +399,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -667,6 +692,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -929,6 +961,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7f1d1383a249..ff31667a890b 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -990,6 +1011,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index bf636fd560ad..e285ec0fe958 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,6 +671,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -905,6 +937,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index fe6454eacbdb..1ab3e4cd3018 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +395,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,6 +677,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -903,6 +935,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index fe08f672cb27..a592b5efdc4d 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,8 +124,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +269,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -380,7 +398,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,6 +537,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -749,6 +784,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,6 +873,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -862,10 +888,12 @@ CONFIG_HID=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -928,6 +956,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 09146ddaa3ca..ff04e1028f5e 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +380,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -560,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
@@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 7b43be7586b6..fb10cc83702e 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,8 +126,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -244,9 +259,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -462,9 +482,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 62adb71a5d4f..5c8ce6978825 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +393,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -527,8 +553,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 41209e3a6545..158e63e8607f 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -245,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,7 +391,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -575,8 +601,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 6c36c9c7abfd..2726fca1d694 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +387,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -495,6 +520,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 4aaf1a6bdc7d..b0c469823b02 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,7 +126,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +379,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -460,9 +480,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 79984589db69..04c85dada845 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -182,6 +195,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -382,7 +399,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -643,6 +666,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index bd1bfcddbd0c..e7e81d6769fe 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -153,7 +166,7 @@ CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -186,6 +199,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -442,7 +458,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
@@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 # CONFIG_FS_ENET is not set
@@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1027,6 +1060,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 767600145fb2..2c407523aad2 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
@@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -243,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +386,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 52fafc006dd0..845731dc51c6 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 8b4faae7a9a1..4f228a905274 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +198,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -605,6 +629,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 170360934cec..9196724bebc7 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index f41cc2444d48..2e49a6e9faf2 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2552cbefba6b..1025da2bf069 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +128,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
@@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -784,6 +803,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -803,8 +823,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1352,8 +1367,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b6a23af57f46..527ad1a5e802 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,9 +117,7 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -216,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -235,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,14 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -353,8 +386,8 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,174 +413,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
-CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
 #
@@ -560,12 +445,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -580,9 +460,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -672,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -707,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -731,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -751,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -759,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -778,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -791,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -842,6 +772,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -862,14 +793,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -916,6 +850,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -935,8 +870,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -963,22 +900,8 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -990,7 +913,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
 # CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -1010,7 +932,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -1058,6 +980,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1080,6 +1003,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -1143,18 +1074,21 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -1229,6 +1163,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1284,24 +1219,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1346,7 +1266,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1363,10 +1283,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1392,6 +1313,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1401,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1475,7 +1399,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1521,6 +1444,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1548,6 +1472,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1569,10 +1497,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1589,8 +1519,11 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1598,8 +1531,8 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1649,6 +1582,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1723,13 +1657,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
@@ -1738,6 +1672,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1750,75 +1685,24 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1826,15 +1710,9 @@ CONFIG_PRINT_STACK_DEPTH=64
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1854,11 +1732,11 @@ CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -1873,53 +1751,52 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
 # CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a66910e63345..cd338d493bed 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -91,7 +96,11 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,7 +118,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,7 +187,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
 
 #
 # Platform support
@@ -212,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -231,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,13 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -393,6 +431,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +460,9 @@ CONFIG_FIB_RULES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -511,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -546,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -570,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -590,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -598,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -617,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -630,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -647,14 +738,17 @@ CONFIG_SATA_SIL24=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -701,6 +795,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -720,8 +815,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -748,6 +845,7 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -827,6 +925,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -849,6 +948,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -912,13 +1019,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -997,6 +1108,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1052,24 +1164,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1114,7 +1211,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1131,10 +1228,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,6 +1258,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1169,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1288,6 +1389,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1315,6 +1417,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1336,10 +1442,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1419,6 +1527,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1508,6 +1617,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1531,23 +1641,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index c6a7fc82b69a..ba47883f4aa0 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +131,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -510,6 +528,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -566,7 +585,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -922,6 +948,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1149,13 +1178,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1398,6 +1418,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index cfd2efcc6bce..a61f183f7186 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -250,9 +266,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -398,7 +417,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -792,6 +817,7 @@ CONFIG_ULI526X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0bee3e303942..7016ce732605 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,9 +130,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -419,7 +437,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -689,6 +714,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index c30a0c715873..f5ca2e0cd402 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -508,6 +527,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -564,7 +584,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -801,6 +832,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1079,6 +1117,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 # CONFIG_REISERFS_FS_SECURITY is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_STATS=y
@@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_FS_POSIX_ACL is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 74f7f7c6fdc4..aece6bb5f733 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,12 +50,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +254,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 9ffa8de92803..8105360d53f4 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -131,16 +135,23 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -279,9 +296,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -583,6 +601,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000
 CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 CONFIG_SCSI_ARCMSR=m
@@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m
 CONFIG_SCSI_IPS=m
 CONFIG_SCSI_INITIO=m
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -957,6 +981,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 CONFIG_SENSORS_VIA686A=m
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m
 #
 CONFIG_PCIPCWATCHDOG=m
 CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
 
 #
 # USB-based Watchdog Cards
@@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
@@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 04915c3a43f6..0aa5b43ffeb2 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,9 +244,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -380,7 +397,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -573,6 +599,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -771,6 +789,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -787,9 +809,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c2a439595f4d..2c292e25cc01 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +253,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +369,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +528,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -642,6 +653,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -653,12 +668,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index a4053ab9e244..45671e7dd2c7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -257,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -865,8 +889,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1135,6 +1165,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
@@ -1578,7 +1604,7 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 31e1df665157..e9491c1c3f31 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +604,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -757,9 +778,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 24fa90792c54..1ae85a3b2942 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -115,7 +117,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -241,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 # CONFIG_FS_ENET_HAS_FEC is not set
@@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 642ab67c8431..f23428c3b34e 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,9 +123,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +382,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -568,14 +588,17 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -642,6 +665,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index cb966ca2ce89..02716f72db6f 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,9 +116,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -231,9 +247,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -383,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +603,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -828,6 +847,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 433c303eb82b..4a96cb6925b4 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +127,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
@@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -261,9 +278,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -391,7 +409,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -751,6 +776,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1050,6 +1082,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
@@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c162724fed4f..ada595898af1 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -129,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -260,9 +277,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +443,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,6 +721,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1352,8 +1328,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 1aa1c508d600..db082ce5a1c5 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -130,9 +132,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -264,9 +281,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -428,7 +447,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1356,8 +1332,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3add6f62b21e..6809b61ed3de 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -111,8 +113,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -238,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +372,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,6 +466,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
@@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5bb1b8eb0b49..0e8684a3138d 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +275,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +439,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -692,6 +717,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 42e64ebc279d..dbe8e869a827 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -246,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -519,6 +539,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -653,6 +664,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -664,12 +679,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 129d80860f2a..ff96bb43c32d 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,9 +120,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -234,9 +250,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -387,7 +404,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -636,6 +663,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -912,9 +933,11 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e9f287f313fa..1293c465d7fa 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -249,9 +265,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -721,7 +743,11 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -797,6 +822,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -818,6 +844,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1068,6 +1099,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index bd4a8d435c50..28384dc01003 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,9 +118,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,8 +718,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 0815eb40acae..c9500d666a1d 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
  */
 /* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
 #define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb,x)           do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)         do { } while (0)
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index afda2bdd860f..e6f069c4f713 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf)
                 kmem_cache_free(pgtable_cache[cachenum], p);
 }
 
-#define __pmd_free_tlb(tlb, pmd)        \
+#define __pmd_free_tlb(tlb, pmd,addr)                 \
         pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
                 PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
 #ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)        \
+#define __pud_free_tlb(tlb, pud, addr)                \
         pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
                 PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
 #endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 5d8480265a77..1730e5e298d6 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
 
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage)     \
+#define __pte_free_tlb(tlb,ptepage,address)             \
 do { \
         pgtable_page_dtor(ptepage); \
         pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-                PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+                                        PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
 } while (0)
 #else
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address)       pte_free((tlb)->mm, (pte))
 #endif
 
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 9fa2c7dcd05a..ef149880c145 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -736,15 +736,16 @@ void user_disable_single_step(struct task_struct *task)
 {
         struct pt_regs *regs = task->thread.regs;
 
-
-#if defined(CONFIG_BOOKE)
-        /* If DAC then do not single step, skip */
-        if (task->thread.dabr)
-                return;
-#endif
-
         if (regs != NULL) {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#if defined(CONFIG_BOOKE)
+                /* If DAC don't clear DBCRO_IDM or MSR_DE */
+                if (task->thread.dabr)
+                        task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT);
+                else {
+                        task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
+                        regs->msr &= ~MSR_DE;
+                }
+#elif defined(CONFIG_40x)
                 task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM);
                 regs->msr &= ~MSR_DE;
 #else
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 297632cba047..8a6daf4129f6 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -21,7 +21,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ef36cbbc5882..ea4d64644d02 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,10 +80,10 @@ _GLOBAL(load_up_altivec)
         mtvscr  vr0
         REST_32VRS(0,r4,r5)
 #ifndef CONFIG_SMP
-        /* Update last_task_used_math to 'current' */
+        /* Update last_task_used_altivec to 'current' */
         subi    r4,r5,THREAD            /* Back to 'current' */
         fromreal(r4)
-        PPC_STL r4,ADDROFF(last_task_used_math)(r3)
+        PPC_STL r4,ADDROFF(last_task_used_altivec)(r3)
 #endif /* CONFIG_SMP */
         /* restore registers and return */
         blr
@@ -172,7 +172,7 @@ _GLOBAL(load_up_vsx)
         oris    r12,r12,MSR_VSX@h
         std     r12,_MSR(r1)
 #ifndef CONFIG_SMP
-        /* Update last_task_used_math to 'current' */
+        /* Update last_task_used_vsx to 'current' */
         ld      r4,PACACURRENT(r13)
         std     r4,0(r3)
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9920d6a7cf29..c46ef2ffa3d9 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
         pmd = pmd_offset(pud, start);
         pud_clear(pud);
-        pmd_free_tlb(tlb, pmd);
+        pmd_free_tlb(tlb, pmd, start);
 }
 
 static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
         pud = pud_offset(pgd, start);
         pgd_clear(pgd);
-        pud_free_tlb(tlb, pud);
+        pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 92a197117d5b..b1a727def15b 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
                         id = steal_context_smp(id);
                         if (id == MMU_NO_CONTEXT)
                                 goto again;
+                        goto stolen;
                 }
 #endif /* CONFIG_SMP */
                 id = steal_context_up(id);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 60ed9c067b1d..bfb32834ab0c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void)
                         /* Turn UCC1 & UCC2 on */
                         setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
                         setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+                } else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST    (0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST   (0x1 << 1)
+                        /*
+                         * U-Boot mangles interrupt polarity for Marvell PHYs,
+                         * so reset built-in and UEM Marvell PHYs, this puts
+                         * the PHYs into their normal state.
+                         */
+                        clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+                        setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+                        setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+                        clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
                 }
                 iounmap(bcsr_regs);
         }
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d39d9d..81150b053689 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
  * pte_free_tlb frees a pte table and clears the CRSTE for the
  * page table from the tlb.
  */
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+                                unsigned long address)
 {
         if (!tlb->fullmm) {
                 tlb->array[tlb->nr_ptes++] = pte;
@@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
  * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
  * to avoid the double free of the pmd in this case.
  */
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+                                unsigned long address)
 {
 #ifdef __s390x__
         if (tlb->mm->context.asce_limit <= (1UL << 31))
@@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
  * as the pgd. pud_free_tlb checks the asce_limit against 4TB
  * to avoid the double free of the pud in this case.
  */
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+                                unsigned long address)
 {
 #ifdef __s390x__
         if (tlb->mm->context.asce_limit <= (1UL << 42))
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index d2f270c995d9..db943a7ec513 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -15,7 +15,6 @@
 #include <linux/timer.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f9b144049dc9..8d15314381e0 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void)
                 machine_flags |= MACHINE_FLAG_VM;
 }
 
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
 {
         unsigned long addr;
         const struct exception_table_entry *fixup;
@@ -222,7 +222,7 @@ static void early_pgm_check_handler(void)
         S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
 {
         psw_t psw;
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 490b39934d65..43acd73105b7 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -26,7 +26,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2270730f5354..be2cae083406 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 #ifndef CONFIG_64BIT
         if (MACHINE_HAS_IEEE)
                 lowcore->extended_save_area_addr = (u32) save_area;
-#else
-        if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
-                BUG();
 #endif
         set_prefix((u32)(unsigned long) lowcore);
         local_mcck_enable();
         local_irq_enable();
+#ifdef CONFIG_64BIT
+        if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+                BUG();
+#endif
         for_each_possible_cpu(cpu)
                 if (cpu != smp_processor_id())
                         smp_create_idle(cpu);
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 79dbfee831ec..49106c6e6f88 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -88,10 +88,17 @@ __kernel_clock_gettime:
         llilh   %r4,0x0100
         sar     %a4,%r4
         lghi    %r4,0
+        epsw    %r5,0
         sacf    512                             /* Magic ectg instruction */
         .insn   ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
-        sacf    0
-        sar     %a4,%r2
+        tml     %r5,0x4000
+        jo      11f
+        tml     %r5,0x8000
+        jno     10f
+        sacf    256
+        j       11f
+10:     sacf    0
+11:     sar     %a4,%r2
         algr    %r1,%r0                         /* r1 = cputime as TOD value */
         mghi    %r1,1000                        /* convert to nanoseconds */
         srlg    %r1,%r1,12                      /* r1 = cputime in nanosec */
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 74eb26bf1970..e5e119fe03b2 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -22,7 +22,6 @@
 #include <linux/compat.h>
 #include <linux/smp.h>
 #include <linux/kdebug.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/module.h>
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
index e6a4fe9f5f24..bd1f5c6b0b8c 100644
--- a/arch/s390/power/swsusp.c
+++ b/arch/s390/power/swsusp.c
@@ -7,24 +7,36 @@
  *
  */
 
+#include <asm/system.h>
 
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
 void save_processor_state(void)
 {
-        /* implentation contained in the
-         * swsusp_arch_suspend function
+        /* swsusp_arch_suspend() actually saves all cpu register contents.
+         * Machine checks must be disabled since swsusp_arch_suspend() stores
+         * register contents to their lowcore save areas. That's the same
+         * place where register contents on machine checks would be saved.
+         * To avoid register corruption disable machine checks.
+         * We must also disable machine checks in the new psw mask for
+         * program checks, since swsusp_arch_suspend() may generate program
+         * checks. Disabling machine checks for all other new psw masks is
+         * just paranoia.
          */
+        local_mcck_disable();
+        /* Disable lowcore protection */
+        __ctl_clear_bit(0,28);
+        S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+        S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+        S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+        S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
 }
 
-/*
- * restore the contents of CPU registers
- */
 void restore_processor_state(void)
 {
-        /* implentation contained in the
-         * swsusp_arch_resume function
-         */
+        S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+        S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+        S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+        S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+        /* Enable lowcore protection */
+        __ctl_set_bit(0,28);
+        local_mcck_enable();
 }
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 76d688da32fa..b26df5c5933e 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -32,19 +32,14 @@ swsusp_arch_suspend:
         /* Deactivate DAT */
         stnsm   __SF_EMPTY(%r15),0xfb
 
-        /* Switch off lowcore protection */
-        stctg   %c0,%c0,__SF_EMPTY(%r15)
-        ni      __SF_EMPTY+4(%r15),0xef
-        lctlg   %c0,%c0,__SF_EMPTY(%r15)
-
         /* Store prefix register on stack */
         stpx    __SF_EMPTY(%r15)
 
-        /* Setup base register for lowcore (absolute 0) */
-        llgf    %r1,__SF_EMPTY(%r15)
+        /* Save prefix register contents for lowcore */
+        llgf    %r4,__SF_EMPTY(%r15)
 
         /* Get pointer to save area */
-        aghi    %r1,0x1000
+        lghi    %r1,0x1000
 
         /* Store registers */
         mvc     0x318(4,%r1),__SF_EMPTY(%r15)   /* move prefix to lowcore */
@@ -79,17 +74,15 @@ swsusp_arch_suspend:
         xc      __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
         spx     __SF_EMPTY(%r15)
 
-        /* Setup lowcore */
-        brasl   %r14,setup_lowcore_early
+        lghi    %r2,0
+        lghi    %r3,2*PAGE_SIZE
+        lghi    %r5,2*PAGE_SIZE
+1:      mvcle   %r2,%r4,0
+        jo      1b
 
         /* Save image */
         brasl   %r14,swsusp_save
 
-        /* Switch on lowcore protection */
-        stctg   %c0,%c0,__SF_EMPTY(%r15)
-        oi      __SF_EMPTY+4(%r15),0x10
-        lctlg   %c0,%c0,__SF_EMPTY(%r15)
-
         /* Restore prefix register and return */
         lghi    %r1,0x1000
         spx     0x318(%r1)
@@ -117,11 +110,6 @@ swsusp_arch_resume:
         /* Deactivate DAT */
         stnsm   __SF_EMPTY(%r15),0xfb
 
-        /* Switch off lowcore protection */
-        stctg   %c0,%c0,__SF_EMPTY(%r15)
-        ni      __SF_EMPTY+4(%r15),0xef
-        lctlg   %c0,%c0,__SF_EMPTY(%r15)
-
         /* Set prefix page to zero */
         xc      __SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
         spx     __SF_EMPTY(%r15)
@@ -175,7 +163,7 @@ swsusp_arch_resume:
         /* Load old stack */
         lg      %r15,0x2f8(%r13)
 
-        /* Pointer to save arae */
+        /* Pointer to save area */
         lghi    %r13,0x1000
 
 #ifdef CONFIG_SMP
@@ -187,11 +175,6 @@ swsusp_arch_resume:
         /* Restore prefix register */
         spx     0x318(%r13)
 
-        /* Switch on lowcore protection */
-        stctg   %c0,%c0,__SF_EMPTY(%r15)
-        oi      __SF_EMPTY+4(%r15),0x10
-        lctlg   %c0,%c0,__SF_EMPTY(%r15)
-
         /* Activate DAT */
         stosm   __SF_EMPTY(%r15),0x04
 
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db7104c..63ca37bd9a95 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -73,20 +73,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte,addr)                    \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb), (pte));                  \
 } while (0)
 
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x)                 do { } while (0)
-#define __pmd_free_tlb(tlb,x)           do { } while (0)
-
 static inline void check_pgt_cache(void)
 {
         quicklist_trim(QUICK_PGD, NULL, 25, 16);
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 9c16f737074a..da8fe7ab8728 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)       free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)         pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)         pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp)         pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr)   pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)   pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr)   pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)          do { } while (0)
 
diff --git a/arch/sh/mm/tlb-sh3.c b/arch/sh/mm/tlb-sh3.c
index 7fbfd5a11ffa..17cb7c3adf22 100644
--- a/arch/sh/mm/tlb-sh3.c
+++ b/arch/sh/mm/tlb-sh3.c
@@ -18,7 +18,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 
 #include <asm/system.h>
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d26969..ca2b34456c4b 100644
--- a/arch/sparc/include/asm/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
 BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
 #define free_pmd_fast(pmd)      BTFIXUP_CALL(free_pmd_fast)(pmd)
 
-#define pmd_free(mm, pmd)       free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd)               free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
 
 BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
 #define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
@@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
 #define pte_free_kernel(mm, pte)        BTFIXUP_CALL(free_pte_fast)(pte)
 
 BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte)       BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte)        pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte)               BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
 
 #endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ee38e731bfa6..dca406b9b6fc 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
 }
 
 #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
 
 #define tlb_migrate_finish(mm)  do { } while (0)
 #define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/sparc/kernel/ptrace_32.c b/arch/sparc/kernel/ptrace_32.c
index 8ce6285a06d5..7e3dfd9bb97e 100644
--- a/arch/sparc/kernel/ptrace_32.c
+++ b/arch/sparc/kernel/ptrace_32.c
@@ -16,7 +16,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
diff --git a/arch/sparc/kernel/ptrace_64.c b/arch/sparc/kernel/ptrace_64.c
index a941c610e7ce..4ae91dc2feb9 100644
--- a/arch/sparc/kernel/ptrace_64.c
+++ b/arch/sparc/kernel/ptrace_64.c
@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/user.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/security.h>
 #include <linux/seccomp.h>
 #include <linux/audit.h>
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 5c12e79b4bdf..da1218e8ee87 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/param.h>
 #include <linux/string.h>
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 358283341b47..c0490c7bbde0 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kdebug.h>
 
 #include <asm/delay.h>
diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c
index 753d128ed158..c28c71449a6c 100644
--- a/arch/sparc/kernel/vio.c
+++ b/arch/sparc/kernel/vio.c
@@ -224,7 +224,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
         if (!strcmp(type, "domain-services-port"))
                 bus_id_name = "ds";
 
-        if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
+        /*
+         * 20 char is the old driver-core name size limit, which is no more.
+         * This check can probably be removed after review and possible
+         * adaption of the vio users name length handling.
+         */
+        if (strlen(bus_id_name) >= 20 - 4) {
                 printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
                        bus_id_name);
                 return NULL;
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 718984359f8c..32c8ce4e1515 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
         __free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)                         \
+#define __pte_free_tlb(tlb,pte, address)                \
 do {                                                    \
         pgtable_page_dtor(pte);                         \
         tlb_remove_page((tlb),(pte));                   \
@@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
         free_page((unsigned long)pmd);
 }
 
-#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address)   tlb_remove_page((tlb),virt_to_page(x))
 #endif
 
 #define check_pgt_cache()       do { } while (0)
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
index 5240fa1c5e08..660caedac9eb 100644
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
                 __tlb_remove_tlb_entry(tlb, ptep, address);     \
         } while (0)
 
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
 
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
 
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
 
 #define tlb_migrate_finish(mm) do {} while (0)
 
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index daf866ed0612..330ee807f89e 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -161,6 +161,7 @@ extern int io_apic_set_pci_routing(struct device *dev, int irq,
                  struct io_apic_irq_attr *irq_attr);
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
+extern void ioapic_insert_resources(void);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
@@ -180,6 +181,7 @@ extern void ioapic_write_entry(int apic, int pin,
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
 static inline void ioapic_init_mappings(void)   { }
+static inline void ioapic_insert_resources(void) { }
 
 static inline void probe_nr_irqs_gsi(void)      { }
 #endif
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389cd50d2..5136dad57cbb 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_ADDR 0xFFE00000
 #else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index d31c4a684078..ba0eed8aa1a6 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,27 +30,27 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:031 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi.  If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
 
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-        /* These map directly onto eax, ebx, ecx, edx and esi
-         * in struct lguest_regs */
+        /* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
         unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54ac718..0e8c2a0fd922 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
         __free_page(pte);
 }
 
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+                                  unsigned long address)
+{
+        ___pte_free_tlb(tlb, pte);
+}
 
 static inline void pmd_populate_kernel(struct mm_struct *mm,
                                        pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
         free_page((unsigned long)pmd);
 }
 
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+                                  unsigned long adddress)
+{
+        ___pmd_free_tlb(tlb, pmd);
+}
 
 #ifdef CONFIG_X86_PAE
 extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
         free_page((unsigned long)pud);
 }
 
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+                                  unsigned long address)
+{
+        ___pud_free_tlb(tlb, pud);
+}
+
 #endif  /* PAGETABLE_LEVELS > 3 */
 #endif  /* PAGETABLE_LEVELS > 2 */
 
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a795e160..d2c6c930b491 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@ extern int __get_user_bad(void);
                      : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
 #define __put_user_asm_u64(x, ptr, retval, errret) \
-        __put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+        __put_user_asm(x, ptr, retval, "q", "", "er", errret)
 #define __put_user_asm_ex_u64(x, addr)  \
-        __put_user_asm_ex(x, addr, "q", "", "Zr")
+        __put_user_asm_ex(x, addr, "q", "", "er")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
 
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc687326eb8..db24b215fc50 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
                               ret, "l", "k", "ir", 4);
                 return ret;
         case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-                              ret, "q", "", "ir", 8);
+                              ret, "q", "", "er", 8);
                 return ret;
         case 10:
                 __put_user_asm(*(u64 *)src, (u64 __user *)dst,
-                               ret, "q", "", "ir", 10);
+                               ret, "q", "", "er", 10);
                 if (unlikely(ret))
                         return ret;
                 asm("":::"memory");
@@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
                 return ret;
         case 16:
                 __put_user_asm(*(u64 *)src, (u64 __user *)dst,
-                               ret, "q", "", "ir", 16);
+                               ret, "q", "", "er", 16);
                 if (unlikely(ret))
                         return ret;
                 asm("":::"memory");
                 __put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-                               ret, "q", "", "ir", 8);
+                               ret, "q", "", "er", 8);
                 return ret;
         default:
                 return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
                                ret, "q", "", "=r", 8);
                 if (likely(!ret))
                         __put_user_asm(tmp, (u64 __user *)dst,
-                                       ret, "q", "", "ir", 8);
+                                       ret, "q", "", "er", 8);
                 return ret;
         }
         default:
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac8de9c..8952a5890281 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -652,7 +652,8 @@ static int es7000_mps_oem_check_cluster(struct mpc_table *mpc, char *oem,
         return ret && es7000_apic_is_cluster();
 }
 
-struct apic apic_es7000_cluster = {
+/* We've been warned by a false positive warning.Use __refdata to keep calm. */
+struct apic __refdata apic_es7000_cluster = {
 
         .name                           = "es7000",
         .probe                          = probe_es7000,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 90b5e6efa938..2284a4812b68 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4181,28 +4181,20 @@ fake_ioapic_page:
         }
 }
 
-static int __init ioapic_insert_resources(void)
+void __init ioapic_insert_resources(void)
 {
         int i;
         struct resource *r = ioapic_resources;
 
         if (!r) {
-                if (nr_ioapics > 0) {
+                if (nr_ioapics > 0)
                         printk(KERN_ERR
                                 "IO APIC resources couldn't be allocated.\n");
-                        return -1;
-                }
-                return 0;
+                return;
         }
 
         for (i = 0; i < nr_ioapics; i++) {
                 insert_resource(&iomem_resource, r);
                 r++;
         }
-
-        return 0;
 }
-
-/* Insert the IO APIC resources after PCI initialization has occured to handle
- * IO APICS that are mapped in on a BAR in PCI space. */
-late_initcall(ioapic_insert_resources);
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 533e59c6fc82..ca96e68f0d23 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -493,7 +493,8 @@ static void numaq_setup_portio_remap(void)
                 (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
 }
 
-struct apic apic_numaq = {
+/* Use __refdata to keep false positive warning calm.   */
+struct apic __refdata apic_numaq = {
 
         .name                           = "NUMAQ",
         .probe                          = probe_numaq,
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f5956042..e2485b03f1cf 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -356,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 #endif
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
         /* check CPU config space for extended APIC ID */
-        if (c->x86 >= 0xf) {
+        if (cpu_has_apic && c->x86 >= 0xf) {
                 unsigned int val;
                 val = read_pci_config(0, 24, 0, 0x68);
                 if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 484c1e5f658e..1cfb623ce11c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1692,17 +1692,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
                                 const char *buf, size_t siz)
 {
         char *p;
-        int len;
 
         strncpy(mce_helper, buf, sizeof(mce_helper));
         mce_helper[sizeof(mce_helper)-1] = 0;
-        len = strlen(mce_helper);
         p = strchr(mce_helper, '\n');
 
-        if (*p)
+        if (p)
                 *p = 0;
 
-        return len;
+        return strlen(mce_helper) + !!p;
 }
 
 static ssize_t set_ignore_ce(struct sys_device *s,
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 36c3dc7b8991..a7aa8f900954 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -66,6 +66,52 @@ static DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = {
 };
 
 /*
+ * Not sure about some of these
+ */
+static const u64 p6_perfmon_event_map[] =
+{
+  [PERF_COUNT_HW_CPU_CYCLES]            = 0x0079,
+  [PERF_COUNT_HW_INSTRUCTIONS]          = 0x00c0,
+  [PERF_COUNT_HW_CACHE_REFERENCES]      = 0x0000,
+  [PERF_COUNT_HW_CACHE_MISSES]          = 0x0000,
+  [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]   = 0x00c4,
+  [PERF_COUNT_HW_BRANCH_MISSES]         = 0x00c5,
+  [PERF_COUNT_HW_BUS_CYCLES]            = 0x0062,
+};
+
+static u64 p6_pmu_event_map(int event)
+{
+        return p6_perfmon_event_map[event];
+}
+
+/*
+ * Counter setting that is specified not to count anything.
+ * We use this to effectively disable a counter.
+ *
+ * L2_RQSTS with 0 MESI unit mask.
+ */
+#define P6_NOP_COUNTER                  0x0000002EULL
+
+static u64 p6_pmu_raw_event(u64 event)
+{
+#define P6_EVNTSEL_EVENT_MASK           0x000000FFULL
+#define P6_EVNTSEL_UNIT_MASK            0x0000FF00ULL
+#define P6_EVNTSEL_EDGE_MASK            0x00040000ULL
+#define P6_EVNTSEL_INV_MASK             0x00800000ULL
+#define P6_EVNTSEL_COUNTER_MASK         0xFF000000ULL
+
+#define P6_EVNTSEL_MASK                 \
+        (P6_EVNTSEL_EVENT_MASK |        \
+         P6_EVNTSEL_UNIT_MASK  |        \
+         P6_EVNTSEL_EDGE_MASK  |        \
+         P6_EVNTSEL_INV_MASK   |        \
+         P6_EVNTSEL_COUNTER_MASK)
+
+        return event & P6_EVNTSEL_MASK;
+}
+
+
+/*
  * Intel PerfMon v3. Used on Core2 and later.
  */
 static const u64 intel_perfmon_event_map[] =
@@ -666,6 +712,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 {
         struct perf_counter_attr *attr = &counter->attr;
         struct hw_perf_counter *hwc = &counter->hw;
+        u64 config;
         int err;
 
         if (!x86_pmu_initialized())
@@ -718,14 +765,40 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 
         if (attr->config >= x86_pmu.max_events)
                 return -EINVAL;
+
         /*
          * The generic map:
          */
-        hwc->config |= x86_pmu.event_map(attr->config);
+        config = x86_pmu.event_map(attr->config);
+
+        if (config == 0)
+                return -ENOENT;
+
+        if (config == -1LL)
+                return -EINVAL;
+
+        hwc->config |= config;
 
         return 0;
 }
 
+static void p6_pmu_disable_all(void)
+{
+        struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+        u64 val;
+
+        if (!cpuc->enabled)
+                return;
+
+        cpuc->enabled = 0;
+        barrier();
+
+        /* p6 only has one enable register */
+        rdmsrl(MSR_P6_EVNTSEL0, val);
+        val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+        wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_disable_all(void)
 {
         wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
@@ -767,6 +840,23 @@ void hw_perf_disable(void)
         return x86_pmu.disable_all();
 }
 
+static void p6_pmu_enable_all(void)
+{
+        struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+        unsigned long val;
+
+        if (cpuc->enabled)
+                return;
+
+        cpuc->enabled = 1;
+        barrier();
+
+        /* p6 only has one enable register */
+        rdmsrl(MSR_P6_EVNTSEL0, val);
+        val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+        wrmsrl(MSR_P6_EVNTSEL0, val);
+}
+
 static void intel_pmu_enable_all(void)
 {
         wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
@@ -784,13 +874,13 @@ static void amd_pmu_enable_all(void)
         barrier();
 
         for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+                struct perf_counter *counter = cpuc->counters[idx];
                 u64 val;
 
                 if (!test_bit(idx, cpuc->active_mask))
                         continue;
-                rdmsrl(MSR_K7_EVNTSEL0 + idx, val);
-                if (val & ARCH_PERFMON_EVENTSEL0_ENABLE)
-                        continue;
+
+                val = counter->hw.config;
                 val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
                 wrmsrl(MSR_K7_EVNTSEL0 + idx, val);
         }
@@ -819,16 +909,13 @@ static inline void intel_pmu_ack_status(u64 ack)
 
 static inline void x86_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
-        int err;
-        err = checking_wrmsrl(hwc->config_base + idx,
+        (void)checking_wrmsrl(hwc->config_base + idx,
                               hwc->config | ARCH_PERFMON_EVENTSEL0_ENABLE);
 }
 
 static inline void x86_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
-        int err;
-        err = checking_wrmsrl(hwc->config_base + idx,
-                              hwc->config);
+        (void)checking_wrmsrl(hwc->config_base + idx, hwc->config);
 }
 
 static inline void
@@ -836,13 +923,24 @@ intel_pmu_disable_fixed(struct hw_perf_counter *hwc, int __idx)
 {
         int idx = __idx - X86_PMC_IDX_FIXED;
         u64 ctrl_val, mask;
-        int err;
 
         mask = 0xfULL << (idx * 4);
 
         rdmsrl(hwc->config_base, ctrl_val);
         ctrl_val &= ~mask;
-        err = checking_wrmsrl(hwc->config_base, ctrl_val);
+        (void)checking_wrmsrl(hwc->config_base, ctrl_val);
+}
+
+static inline void
+p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
+{
+        struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+        u64 val = P6_NOP_COUNTER;
+
+        if (cpuc->enabled)
+                val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+        (void)checking_wrmsrl(hwc->config_base + idx, val);
 }
 
 static inline void
@@ -943,6 +1041,19 @@ intel_pmu_enable_fixed(struct hw_perf_counter *hwc, int __idx)
         err = checking_wrmsrl(hwc->config_base, ctrl_val);
 }
 
+static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
+{
+        struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+        u64 val;
+
+        val = hwc->config;
+        if (cpuc->enabled)
+                val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+
+        (void)checking_wrmsrl(hwc->config_base + idx, val);
+}
+
+
 static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
         if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
@@ -959,8 +1070,6 @@ static void amd_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 
         if (cpuc->enabled)
                 x86_pmu_enable_counter(hwc, idx);
-        else
-                x86_pmu_disable_counter(hwc, idx);
 }
 
 static int
@@ -1176,6 +1285,49 @@ static void intel_pmu_reset(void)
         local_irq_restore(flags);
 }
 
+static int p6_pmu_handle_irq(struct pt_regs *regs)
+{
+        struct perf_sample_data data;
+        struct cpu_hw_counters *cpuc;
+        struct perf_counter *counter;
+        struct hw_perf_counter *hwc;
+        int idx, handled = 0;
+        u64 val;
+
+        data.regs = regs;
+        data.addr = 0;
+
+        cpuc = &__get_cpu_var(cpu_hw_counters);
+
+        for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+                if (!test_bit(idx, cpuc->active_mask))
+                        continue;
+
+                counter = cpuc->counters[idx];
+                hwc = &counter->hw;
+
+                val = x86_perf_counter_update(counter, hwc, idx);
+                if (val & (1ULL << (x86_pmu.counter_bits - 1)))
+                        continue;
+
+                /*
+                 * counter overflow
+                 */
+                handled         = 1;
+                data.period     = counter->hw.last_period;
+
+                if (!x86_perf_counter_set_period(counter, hwc, idx))
+                        continue;
+
+                if (perf_counter_overflow(counter, 1, &data))
+                        p6_pmu_disable_counter(hwc, idx);
+        }
+
+        if (handled)
+                inc_irq_stat(apic_perf_irqs);
+
+        return handled;
+}
 
 /*
  * This handler is triggered by the local APIC, so the APIC IRQ handling
@@ -1185,14 +1337,13 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 {
         struct perf_sample_data data;
         struct cpu_hw_counters *cpuc;
-        int bit, cpu, loops;
+        int bit, loops;
         u64 ack, status;
 
         data.regs = regs;
         data.addr = 0;
 
-        cpu = smp_processor_id();
-        cpuc = &per_cpu(cpu_hw_counters, cpu);
+        cpuc = &__get_cpu_var(cpu_hw_counters);
 
         perf_disable();
         status = intel_pmu_get_status();
@@ -1249,14 +1400,13 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
         struct cpu_hw_counters *cpuc;
         struct perf_counter *counter;
         struct hw_perf_counter *hwc;
-        int cpu, idx, handled = 0;
+        int idx, handled = 0;
         u64 val;
 
         data.regs = regs;
         data.addr = 0;
 
-        cpu = smp_processor_id();
-        cpuc = &per_cpu(cpu_hw_counters, cpu);
+        cpuc = &__get_cpu_var(cpu_hw_counters);
 
         for (idx = 0; idx < x86_pmu.num_counters; idx++) {
                 if (!test_bit(idx, cpuc->active_mask))
@@ -1353,6 +1503,32 @@ static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
         .priority               = 1
 };
 
+static struct x86_pmu p6_pmu = {
+        .name                   = "p6",
+        .handle_irq             = p6_pmu_handle_irq,
+        .disable_all            = p6_pmu_disable_all,
+        .enable_all             = p6_pmu_enable_all,
+        .enable                 = p6_pmu_enable_counter,
+        .disable                = p6_pmu_disable_counter,
+        .eventsel               = MSR_P6_EVNTSEL0,
+        .perfctr                = MSR_P6_PERFCTR0,
+        .event_map              = p6_pmu_event_map,
+        .raw_event              = p6_pmu_raw_event,
+        .max_events             = ARRAY_SIZE(p6_perfmon_event_map),
+        .max_period             = (1ULL << 31) - 1,
+        .version                = 0,
+        .num_counters           = 2,
+        /*
+         * Counters have 40 bits implemented. However they are designed such
+         * that bits [32-39] are sign extensions of bit 31. As such the
+         * effective width of a counter for P6-like PMU is 32 bits only.
+         *
+         * See IA-32 Intel Architecture Software developer manual Vol 3B
+         */
+        .counter_bits           = 32,
+        .counter_mask           = (1ULL << 32) - 1,
+};
+
 static struct x86_pmu intel_pmu = {
         .name                   = "Intel",
         .handle_irq             = intel_pmu_handle_irq,
@@ -1392,6 +1568,37 @@ static struct x86_pmu amd_pmu = {
         .max_period             = (1ULL << 47) - 1,
 };
 
+static int p6_pmu_init(void)
+{
+        switch (boot_cpu_data.x86_model) {
+        case 1:
+        case 3:  /* Pentium Pro */
+        case 5:
+        case 6:  /* Pentium II */
+        case 7:
+        case 8:
+        case 11: /* Pentium III */
+                break;
+        case 9:
+        case 13:
+                /* Pentium M */
+                break;
+        default:
+                pr_cont("unsupported p6 CPU model %d ",
+                        boot_cpu_data.x86_model);
+                return -ENODEV;
+        }
+
+        if (!cpu_has_apic) {
+                pr_info("no Local APIC, try rebooting with lapic");
+                return -ENODEV;
+        }
+
+        x86_pmu                         = p6_pmu;
+
+        return 0;
+}
+
 static int intel_pmu_init(void)
 {
         union cpuid10_edx edx;
@@ -1400,8 +1607,14 @@ static int intel_pmu_init(void)
         unsigned int ebx;
         int version;
 
-        if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
+        if (!cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
+                /* check for P6 processor family */
+           if (boot_cpu_data.x86 == 6) {
+                return p6_pmu_init();
+           } else {
                 return -ENODEV;
+           }
+        }
 
         /*
          * Check whether the Architectural PerfMon supports
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e475c2d..92b7703d3d58 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_THERMAL_VECTOR
         alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
         alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
 #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b78a09..2a62d843f015 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 
 static struct irqaction mfgptirq  = {
         .handler = mfgpt_tick,
-        .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+        .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
         .name = "mfgpt-timer"
 };
 
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 4f9c55f3a7c0..03801f2f761f 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -60,7 +60,7 @@ static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
                 "adc  %5,%%edx ; "
                 : "=A" (product), "=r" (tmp1), "=r" (tmp2)
                 : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif __x86_64__
+#elif defined(__x86_64__)
         __asm__ (
                 "mul %%rdx ; shrd $32,%%rdx,%%rax"
                 : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8170f0..508e982dd072 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
                         DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
                 },
         },
+        {       /* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+                .callback = set_bios_reboot,
+                .ident = "CompuLab SBC-FITPC2",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+                },
+        },
         { }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab132844..63f32d220ef2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -672,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
                         DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
                 },
         },
+        {
+        /*
+         * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+         * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+         * match only DMI_BOARD_NAME and see if there is more bad products
+         * with this vendor.
+         */
+                .callback = dmi_low_memory_corruption,
+                .ident = "AMI BIOS",
+                .matches = {
+                        DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+                },
+        },
 #endif
         {}
 };
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e87882041..59f31d2dd435 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,11 +112,6 @@ SECTIONS
                 _sdata = .;
                 DATA_DATA
                 CONSTRUCTORS
-
-#ifdef CONFIG_X86_64
-                /* End of data section */
-                _edata = .;
-#endif
         } :data
 
 #ifdef CONFIG_X86_32
@@ -156,10 +151,8 @@ SECTIONS
         .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
                 *(.data.read_mostly)
 
-#ifdef CONFIG_X86_32
                 /* End of data section */
                 _edata = .;
-#endif
         }
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 7bc65f0f62c4..d677fa9ca650 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
  *
  * So how does the kernel know it's a Guest?  We'll see that later, but let's
  * just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
  *
  * The Guest in our tale is a simple creature: identical to the Host but
  * behaving in simplified but equivalent ways.  In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
 
 struct lguest_data lguest_data = {
         .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@ struct lguest_data lguest_data = {
         .syscall_vec = SYSCALL_VECTOR,
 };
 
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
  * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@ struct lguest_data lguest_data = {
  * If we come around to a slot which hasn't been finished, then the table is
  * full and we just make the hypercall directly.  This has the nice side
  * effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
 static void async_hcall(unsigned long call, unsigned long arg1,
                         unsigned long arg2, unsigned long arg3,
                         unsigned long arg4)
@@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1,
         static unsigned int next_call;
         unsigned long flags;
 
-        /* Disable interrupts if not already disabled: we don't want an
+        /*
+         * Disable interrupts if not already disabled: we don't want an
          * interrupt handler making a hypercall while we're already doing
-         * one! */
+         * one!
+         */
         local_irq_save(flags);
         if (lguest_data.hcall_status[next_call] != 0xFF) {
                 /* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1,
         local_irq_restore(flags);
 }
 
-/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall().  This is our first real
+ * optimization trick!
  *
  * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
  * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
@@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
 static void lazy_hcall1(unsigned long call,
                        unsigned long arg1)
 {
@@ -146,6 +154,7 @@ static void lazy_hcall1(unsigned long call,
                 async_hcall(call, arg1, 0, 0, 0);
 }
 
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
 static void lazy_hcall2(unsigned long call,
                        unsigned long arg1,
                        unsigned long arg2)
@@ -181,8 +190,10 @@ static void lazy_hcall4(unsigned long call,
 }
 #endif
 
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
 static void lguest_leave_lazy_mmu_mode(void)
 {
         kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -208,9 +219,11 @@ static void lguest_end_context_switch(struct task_struct *next)
  * check there before it tries to deliver an interrupt.
  */
 
-/* save_flags() is expected to return the processor state (ie. "flags").  The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags").  The
  * flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag.  Our "save_flags()" just returns that. */
+ * about the interrupt flag.  Our "save_flags()" just returns that.
+ */
 static unsigned long save_fl(void)
 {
         return lguest_data.irq_enabled;
@@ -222,13 +235,15 @@ static void irq_disable(void)
         lguest_data.irq_enabled = 0;
 }
 
-/* Let's pause a moment.  Remember how I said these are called so often?
+/*
+ * Let's pause a moment.  Remember how I said these are called so often?
  * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
  * break some rules.  In particular, these functions are assumed to save their
  * own registers if they need to: normal C functions assume they can trash the
  * eax register.  To use normal C functions, we use
  * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
 PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 /*:*/
@@ -237,18 +252,18 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 extern void lg_irq_enable(void);
 extern void lg_restore_fl(unsigned long flags);
 
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt).  This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch.  One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled.  There will then be a page fault as soon as
+ * interrupts are re-enabled.
  *
  * A better method is to implement soft interrupt disable generally for x86:
  * instead of disabling interrupts, we set a flag.  If an interrupt does come
  * in, we then disable them for real.  This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -261,10 +276,12 @@ extern void lg_restore_fl(unsigned long flags);
 static void lguest_write_idt_entry(gate_desc *dt,
                                    int entrynum, const gate_desc *g)
 {
-        /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+        /*
+         * The gate_desc structure is 8 bytes long: we hand it to the Host in
          * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
          * around like this; typesafety wasn't a big concern in Linux's early
-         * years. */
+         * years.
+         */
         u32 *desc = (u32 *)g;
         /* Keep the local copy up to date. */
         native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +289,11 @@ static void lguest_write_idt_entry(gate_desc *dt,
         kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
 }
 
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
  * time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
 static void lguest_load_idt(const struct desc_ptr *desc)
 {
         unsigned int i;
@@ -305,9 +324,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
                 kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
  * then tell the Host to reload the entire thing.  This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
 static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
                                    const void *desc, int type)
 {
@@ -317,29 +338,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
                        dt[entrynum].a, dt[entrynum].b);
 }
 
-/* OK, I lied.  There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied.  There are three "thread local storage" GDT entries which change
  * on every context switch (these three entries are how glibc implements
- * __thread variables).  So we have a hypercall specifically for this case. */
+ * __thread variables).  So we have a hypercall specifically for this case.
+ */
 static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-        /* There's one problem which normal hardware doesn't have: the Host
+        /*
+         * There's one problem which normal hardware doesn't have: the Host
          * can't handle us removing entries we're currently using.  So we clear
-         * the GS register here: if it's needed it'll be reloaded anyway. */
+         * the GS register here: if it's needed it'll be reloaded anyway.
+         */
         lazy_load_gs(0);
         lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
 }
 
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
  *
  * This is the Local Descriptor Table, another weird Intel thingy.  Linux only
  * uses this for some strange applications like Wine.  We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
 static void lguest_set_ldt(const void *addr, unsigned entries)
 {
 }
 
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
  * structure called the Task State Segment.  Some comments scattered though the
  * kernel code indicate that this used for task switching in ages past, along
  * with blood sacrifice and astrology.
@@ -347,19 +375,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries)
  * Now there's nothing interesting in here that we don't get told elsewhere.
  * But the native version uses the "ltr" instruction, which makes the Host
  * complain to the Guest about a Segmentation Fault and it'll oops.  So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
 static void lguest_load_tr_desc(void)
 {
 }
 
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
  * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
  * As you might imagine, after a decade and a half this treatment, it is now a
  * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
- * has been translated into 4 languages.  I am not making this up!
+ * has been translated into 5 languages.  I am not making this up!
  *
  * We could get funky here and identify ourselves as "GenuineLguest", but
  * instead we just use the real "cpuid" instruction.  Then I pretty much turned
@@ -371,7 +401,8 @@ static void lguest_load_tr_desc(void)
  * Replacing the cpuid so we can turn features off is great for the kernel, but
  * anyone (including userspace) can just use the raw "cpuid" instruction and
  * the Host won't even notice since it isn't privileged.  So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
 static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
                          unsigned int *cx, unsigned int *dx)
 {
@@ -379,38 +410,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
         native_cpuid(ax, bx, cx, dx);
         switch (function) {
-        case 1: /* Basic feature request. */
-                /* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+        /*
+         * CPUID 0 gives the highest legal CPUID number (and the ID string).
+         * We futureproof our code a little by sticking to known CPUID values.
+         */
+        case 0:
+                if (*ax > 5)
+                        *ax = 5;
+                break;
+
+        /*
+         * CPUID 1 is a basic feature request.
+         *
+         * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+         * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+         */
+        case 1:
                 *cx &= 0x00002201;
-                /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
                 *dx &= 0x07808151;
-                /* The Host can do a nice optimization if it knows that the
+                /*
+                 * The Host can do a nice optimization if it knows that the
                  * kernel mappings (addresses above 0xC0000000 or whatever
                  * PAGE_OFFSET is set to) haven't changed.  But Linux calls
                  * flush_tlb_user() for both user and kernel mappings unless
-                 * the Page Global Enable (PGE) feature bit is set. */
+                 * the Page Global Enable (PGE) feature bit is set.
+                 */
                 *dx |= 0x00002000;
-                /* We also lie, and say we're family id 5.  6 or greater
+                /*
+                 * We also lie, and say we're family id 5.  6 or greater
                  * leads to a rdmsr in early_init_intel which we can't handle.
-                 * Family ID is returned as bits 8-12 in ax. */
+                 * Family ID is returned as bits 8-12 in ax.
+                 */
                 *ax &= 0xFFFFF0FF;
                 *ax |= 0x00000500;
                 break;
+        /*
+         * 0x80000000 returns the highest Extended Function, so we futureproof
+         * like we do above by limiting it to known fields.
+         */
         case 0x80000000:
-                /* Futureproof this a little: if they ask how much extended
-                 * processor information there is, limit it to known fields. */
                 if (*ax > 0x80000008)
                         *ax = 0x80000008;
                 break;
+
+        /*
+         * PAE systems can mark pages as non-executable.  Linux calls this the
+         * NX bit.  Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+         * Virus Protection).  We just switch turn if off here, since we don't
+         * support it.
+         */
         case 0x80000001:
-                /* Here we should fix nx cap depending on host. */
-                /* For this version of PAE, we just clear NX bit. */
                 *dx &= ~(1 << 20);
                 break;
         }
 }
 
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
  * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
  * it.  The Host needs to know when the Guest wants to change them, so we have
  * a whole series of functions like read_cr0() and write_cr0().
@@ -425,7 +481,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
  * name like "FPUTRAP bit" be a little less cryptic?
  *
  * We store cr0 locally because the Host never changes it.  The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
 static unsigned long current_cr0;
 static void lguest_write_cr0(unsigned long val)
 {
@@ -438,18 +495,22 @@ static unsigned long lguest_read_cr0(void)
         return current_cr0;
 }
 
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
  * to use write_cr0() to do it.  This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
 static void lguest_clts(void)
 {
         lazy_hcall1(LHCALL_TS, 0);
         current_cr0 &= ~X86_CR0_TS;
 }
 
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
  * reads.  The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
 static unsigned long lguest_read_cr2(void)
 {
         return lguest_data.cr2;
@@ -458,10 +519,12 @@ static unsigned long lguest_read_cr2(void)
 /* See lguest_set_pte() below. */
 static bool cr3_changed = false;
 
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
  * cr0.  Keep a local copy, and tell the Host when it changes.  The only
  * difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
 static void lguest_write_cr3(unsigned long cr3)
 {
         lguest_data.pgdir = cr3;
@@ -506,7 +569,7 @@ static void lguest_write_cr4(unsigned long val)
  * cr3 ---> +---------+
  *          |      --------->+---------+
  *          |         |      | PADDR1  |
- *        Top-level   |      | PADDR2  |
+ *        Mid-level   |      | PADDR2  |
  *        (PMD) page  |      |         |
  *          |         |    Lower-level |
  *          |         |    (PTE) page  |
@@ -526,21 +589,62 @@ static void lguest_write_cr4(unsigned long val)
  *    Index into top     Index into second      Offset within page
  *  page directory page    pagetable page
  *
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages.  The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper  ]
+ *         [   Level  ]
+ *         [  Entries ]
+ *         [(PUD Page)]---> +---------+
+ *                          |      --------->+---------+
+ *                          |         |      | PADDR1  |
+ *                        Mid-level   |      | PADDR2  |
+ *                        (PMD) page  |      |         |
+ *                          |         |    Lower-level |
+ *                          |         |    (PTE) page  |
+ *                          |         |      |         |
+ *                            ....               ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ *         1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ *      |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into    Index into mid    Index into lower    Offset within page
+ * top entries   directory page     pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set.  Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages.  The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
  */
 
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space.  We set the entry then tell the Host the
- * toplevel and address this corresponds to.  The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space.  Wetell the Host the toplevel and
+ * address this corresponds to.  The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
                                pte_t *ptep)
 {
 #ifdef CONFIG_X86_PAE
+        /* PAE needs to hand a 64 bit page table entry, so it uses two args. */
         lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
                     ptep->pte_low, ptep->pte_high);
 #else
@@ -548,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 #endif
 }
 
+/* This is the "set and update" combo-meal-deal version. */
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
                               pte_t *ptep, pte_t pteval)
 {
@@ -555,10 +660,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
         lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
  * to set a middle-level entry when PAE is activated.
+ *
  * Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
 #ifdef CONFIG_X86_PAE
 static void lguest_set_pud(pud_t *pudp, pud_t pudval)
 {
@@ -577,8 +685,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #else
 
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
         native_set_pmd(pmdp, pmdval);
@@ -587,7 +694,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #endif
 
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
  * know which pagetable is changing or what address, so we just tell the Host
  * to forget all of them.  Fortunately, this is very rare.
@@ -595,7 +703,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * ... except in early boot when the kernel sets up the initial pagetables,
  * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
  * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
         native_set_pte(ptep, pteval);
@@ -604,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 }
 
 #ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry.  These
+ * versions ensure we update all 64 bits at once.
+ */
 static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
         native_set_pte_atomic(ptep, pte);
@@ -611,19 +725,21 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
                 lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+                             pte_t *ptep)
 {
         native_pte_clear(mm, addr, ptep);
         lguest_pte_update(mm, addr, ptep);
 }
 
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
 {
         lguest_set_pmd(pmdp, __pmd(0));
 }
 #endif
 
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
  * a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -632,24 +748,29 @@ void lguest_pmd_clear(pmd_t *pmdp)
  * called when a valid entry is written, not when it's removed (ie. marked not
  * present).  Instead, this is where we come when the Guest wants to remove a
  * page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
 static void lguest_flush_tlb_single(unsigned long addr)
 {
         /* Simply set it to zero: if it was not, it will fault back in. */
         lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
 }
 
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
  * This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
 static void lguest_flush_tlb_user(void)
 {
         lazy_hcall1(LHCALL_FLUSH_TLB, 0);
 }
 
-/* This is called when the kernel page tables have changed.  That's not very
+/*
+ * This is called when the kernel page tables have changed.  That's not very
  * common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
 static void lguest_flush_tlb_kernel(void)
 {
         lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -686,26 +807,38 @@ static struct irq_chip lguest_irq_controller = {
         .unmask         = enable_lguest_irq,
 };
 
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
  * interrupt (except 128, which is used for system calls), and then tells the
  * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
 static void __init lguest_init_IRQ(void)
 {
         unsigned int i;
 
         for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-                /* Some systems map "vectors" to interrupts weirdly.  Lguest has
-                 * a straightforward 1 to 1 mapping, so force that here. */
+                /* Some systems map "vectors" to interrupts weirdly.  Not us! */
                 __get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
                 if (i != SYSCALL_VECTOR)
                         set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
         }
-        /* This call is required to set up for 4k stacks, where we have
-         * separate stacks for hard and soft interrupts. */
+
+        /*
+         * This call is required to set up for 4k stacks, where we have
+         * separate stacks for hard and soft interrupts.
+         */
         irq_ctx_init(smp_processor_id());
 }
 
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
 void lguest_setup_irq(unsigned int irq)
 {
         irq_to_desc_alloc_node(irq, 0);
@@ -724,31 +857,39 @@ static unsigned long lguest_get_wallclock(void)
         return lguest_data.time.tv_sec;
 }
 
-/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
  * what speed it runs at, or 0 if it's unusable as a reliable clock source.
  * This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
 static unsigned long lguest_tsc_khz(void)
 {
         return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
 static cycle_t lguest_clock_read(struct clocksource *cs)
 {
         unsigned long sec, nsec;
 
-        /* Since the time is in two parts (seconds and nanoseconds), we risk
+        /*
+         * Since the time is in two parts (seconds and nanoseconds), we risk
          * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
          * and getting 99 and 0.  As Linux tends to come apart under the stress
-         * of time travel, we must be careful: */
+         * of time travel, we must be careful:
+         */
         do {
                 /* First we read the seconds part. */
                 sec = lguest_data.time.tv_sec;
-                /* This read memory barrier tells the compiler and the CPU that
+                /*
+                 * This read memory barrier tells the compiler and the CPU that
                  * this can't be reordered: we have to complete the above
-                 * before going on. */
+                 * before going on.
+                 */
                 rmb();
                 /* Now we read the nanoseconds part. */
                 nsec = lguest_data.time.tv_nsec;
@@ -772,9 +913,11 @@ static struct clocksource lguest_clock = {
         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
  * off some time in the future.  Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
@@ -824,8 +967,10 @@ static struct clock_event_device lguest_clockevent = {
         .max_delta_ns           = LG_CLOCK_MAX_DELTA,
 };
 
-/* This is the Guest timer interrupt handler (hardware interrupt 0).  We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0).  We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
 static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 {
         unsigned long flags;
@@ -836,10 +981,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
         local_irq_restore(flags);
 }
 
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
  * infrastructure.  The kernel doesn't expect timer interrupts before this, but
  * we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
 static void lguest_time_init(void)
 {
         /* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -863,14 +1010,16 @@ static void lguest_time_init(void)
  * to work.  They're pretty simple.
  */
 
-/* The Guest needs to tell the Host what stack it expects traps to use.  For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use.  For
  * native hardware, this is part of the Task State Segment mentioned above in
  * lguest_load_tr_desc(), but to help hypervisors there's this special call.
  *
  * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
  * segment), the privilege level (we're privilege level 1, the Host is 0 and
  * will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
 static void lguest_load_sp0(struct tss_struct *tss,
                             struct thread_struct *thread)
 {
@@ -884,7 +1033,8 @@ static void lguest_set_debugreg(int regno, unsigned long value)
         /* FIXME: Implement */
 }
 
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
  * caught in the cache (that they've all reached real hardware devices).  This
  * doesn't matter for the Guest which has virtual hardware.
  *
@@ -898,11 +1048,13 @@ static void lguest_wbinvd(void)
 {
 }
 
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
  * we play dumb by ignoring writes and returning 0 for reads.  So it's no
  * longer Programmable nor Controlling anything, and I don't think 8 lines of
  * code qualifies for Advanced.  It will also never interrupt anything.  It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
 #ifdef CONFIG_X86_LOCAL_APIC
 static void lguest_apic_write(u32 reg, u32 v)
 {
@@ -951,11 +1103,13 @@ static void lguest_safe_halt(void)
         kvm_hypercall0(LHCALL_HALT);
 }
 
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
  * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
 static void lguest_power_off(void)
 {
         kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -986,8 +1140,10 @@ static __init char *lguest_memory_setup(void)
          * nice to move it back to lguest_init.  Patch welcome... */
         atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
-        /* The Linux bootloader header contains an "e820" memory map: the
-         * Launcher populated the first entry with our memory limit. */
+        /*
+         *The Linux bootloader header contains an "e820" memory map: the
+         * Launcher populated the first entry with our memory limit.
+         */
         e820_add_region(boot_params.e820_map[0].addr,
                           boot_params.e820_map[0].size,
                           boot_params.e820_map[0].type);
@@ -996,16 +1152,17 @@ static __init char *lguest_memory_setup(void)
         return "LGUEST";
 }
 
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
  * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
 static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 {
         char scratch[17];
         unsigned int len = count;
 
-        /* We use a nul-terminated string, so we have to make a copy.  Icky,
-         * huh? */
+        /* We use a nul-terminated string, so we make a copy.  Icky, huh? */
         if (len > sizeof(scratch) - 1)
                 len = sizeof(scratch) - 1;
         scratch[len] = '\0';
@@ -1016,8 +1173,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
         return len;
 }
 
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
 static void lguest_restart(char *reason)
 {
         kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1044,7 +1203,8 @@ static void lguest_restart(char *reason)
  * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
 
 /*G:060 We construct a table from the assembler templates: */
 static const struct lguest_insns
@@ -1055,9 +1215,11 @@ static const struct lguest_insns
         [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
  * paravirt.c).  If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
 static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
                              unsigned long addr, unsigned len)
 {
@@ -1069,8 +1231,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 
         insn_len = lguest_insns[type].end - lguest_insns[type].start;
 
-        /* Similarly if we can't fit replacement (shouldn't happen, but let's
-         * be thorough). */
+        /* Similarly if it can't fit (doesn't happen, but let's be thorough). */
         if (len < insn_len)
                 return paravirt_patch_default(type, clobber, ibuf, addr, len);
 
@@ -1079,22 +1240,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
         return insn_len;
 }
 
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
 __init void lguest_init(void)
 {
-        /* We're under lguest, paravirt is enabled, and we're running at
-         * privilege level 1, not 0 as normal. */
+        /* We're under lguest. */
         pv_info.name = "lguest";
+        /* Paravirt is enabled. */
         pv_info.paravirt_enabled = 1;
+        /* We're running at privilege level 1, not 0 as normal. */
         pv_info.kernel_rpl = 1;
+        /* Everyone except Xen runs with this set. */
         pv_info.shared_kernel_pmd = 1;
 
-        /* We set up all the lguest overrides for sensitive operations.  These
-         * are detailed with the operations themselves. */
+        /*
+         * We set up all the lguest overrides for sensitive operations.  These
+         * are detailed with the operations themselves.
+         */
 
-        /* interrupt-related operations */
+        /* Interrupt-related operations */
         pv_irq_ops.init_IRQ = lguest_init_IRQ;
         pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
         pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1102,11 +1269,11 @@ __init void lguest_init(void)
         pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
         pv_irq_ops.safe_halt = lguest_safe_halt;
 
-        /* init-time operations */
+        /* Setup operations */
         pv_init_ops.memory_setup = lguest_memory_setup;
         pv_init_ops.patch = lguest_patch;
 
-        /* Intercepts of various cpu instructions */
+        /* Intercepts of various CPU instructions */
         pv_cpu_ops.load_gdt = lguest_load_gdt;
         pv_cpu_ops.cpuid = lguest_cpuid;
         pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1127,7 +1294,7 @@ __init void lguest_init(void)
         pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
         pv_cpu_ops.end_context_switch = lguest_end_context_switch;
 
-        /* pagetable management */
+        /* Pagetable management */
         pv_mmu_ops.write_cr3 = lguest_write_cr3;
         pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
         pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1149,54 +1316,71 @@ __init void lguest_init(void)
         pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-        /* apic read/write intercepts */
+        /* APIC read/write intercepts */
         set_lguest_basic_apic_ops();
 #endif
 
-        /* time operations */
+        /* Time operations */
         pv_time_ops.get_wallclock = lguest_get_wallclock;
         pv_time_ops.time_init = lguest_time_init;
         pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
-        /* Now is a good time to look at the implementations of these functions
-         * before returning to the rest of lguest_init(). */
+        /*
+         * Now is a good time to look at the implementations of these functions
+         * before returning to the rest of lguest_init().
+         */
 
-        /*G:070 Now we've seen all the paravirt_ops, we return to
+        /*G:070
+         * Now we've seen all the paravirt_ops, we return to
          * lguest_init() where the rest of the fairly chaotic boot setup
-         * occurs. */
+         * occurs.
+         */
 
-        /* The stack protector is a weird thing where gcc places a canary
+        /*
+         * The stack protector is a weird thing where gcc places a canary
          * value on the stack and then checks it on return.  This file is
          * compiled with -fno-stack-protector it, so we got this far without
          * problems.  The value of the canary is kept at offset 20 from the
          * %gs register, so we need to set that up before calling C functions
-         * in other files. */
+         * in other files.
+         */
         setup_stack_canary_segment(0);
-        /* We could just call load_stack_canary_segment(), but we might as
-         * call switch_to_new_gdt() which loads the whole table and sets up
-         * the per-cpu segment descriptor register %fs as well. */
+
+        /*
+         * We could just call load_stack_canary_segment(), but we might as well
+         * call switch_to_new_gdt() which loads the whole table and sets up the
+         * per-cpu segment descriptor register %fs as well.
+         */
         switch_to_new_gdt(0);
 
-        /* As described in head_32.S, we map the first 128M of memory. */
+        /* We actually boot with all memory mapped, but let's say 128MB. */
         max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-        /* The Host<->Guest Switcher lives at the top of our address space, and
+        /*
+         * The Host<->Guest Switcher lives at the top of our address space, and
          * the Host told us how big it is when we made LGUEST_INIT hypercall:
-         * it put the answer in lguest_data.reserve_mem  */
+         * it put the answer in lguest_data.reserve_mem
+         */
         reserve_top_address(lguest_data.reserve_mem);
 
-        /* If we don't initialize the lock dependency checker now, it crashes
-         * paravirt_disable_iospace. */
+        /*
+         * If we don't initialize the lock dependency checker now, it crashes
+         * paravirt_disable_iospace.
+         */
         lockdep_init();
 
-        /* The IDE code spends about 3 seconds probing for disks: if we reserve
+        /*
+         * The IDE code spends about 3 seconds probing for disks: if we reserve
          * all the I/O ports up front it can't get them and so doesn't probe.
          * Other device drivers are similar (but less severe).  This cuts the
-         * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+         * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+         */
         paravirt_disable_iospace();
 
-        /* This is messy CPU setup stuff which the native boot code does before
-         * start_kernel, so we have to do, too: */
+        /*
+         * This is messy CPU setup stuff which the native boot code does before
+         * start_kernel, so we have to do, too:
+         */
         cpu_detect(&new_cpu_data);
         /* head.S usually sets up the first capability word, so do it here. */
         new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1213,22 +1397,28 @@ __init void lguest_init(void)
         acpi_ht = 0;
 #endif
 
-        /* We set the preferred console to "hvc".  This is the "hypervisor
+        /*
+         * We set the preferred console to "hvc".  This is the "hypervisor
          * virtual console" driver written by the PowerPC people, which we also
-         * adapted for lguest's use. */
+         * adapted for lguest's use.
+         */
         add_preferred_console("hvc", 0, NULL);
 
         /* Register our very early console. */
         virtio_cons_early_init(early_put_chars);
 
-        /* Last of all, we set the power management poweroff hook to point to
+        /*
+         * Last of all, we set the power management poweroff hook to point to
          * the Guest routine to power off, and the reboot hook to our restart
-         * routine. */
+         * routine.
+         */
         pm_power_off = lguest_power_off;
         machine_ops.restart = lguest_restart;
 
-        /* Now we're set up, call i386_start_kernel() in head32.c and we proceed
-         * to boot as normal.  It never returns. */
+        /*
+         * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+         * to boot as normal.  It never returns.
+         */
         i386_start_kernel();
 }
 /*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe61cd4..27eac0faee48 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
  * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
  * the bootloader (the Launcher in our case).
  *
@@ -21,11 +22,14 @@
  * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
 .section .init.text, "ax", @progbits
 ENTRY(lguest_entry)
-        /* We make the "initialization" hypercall now to tell the Host about
-         * us, and also find out where it put our page tables. */
+        /*
+         * We make the "initialization" hypercall now to tell the Host about
+         * us, and also find out where it put our page tables.
+         */
         movl $LHCALL_LGUEST_INIT, %eax
         movl $lguest_data - __PAGE_OFFSET, %ebx
         .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@ ENTRY(lguest_entry)
         /* Set up the initial stack so we can run C code. */
         movl $(init_thread_union+THREAD_SIZE),%esp
 
-        /* Jumps are relative, and we're running __PAGE_OFFSET too low at the
-         * moment. */
+        /* Jumps are relative: we're running __PAGE_OFFSET too low. */
         jmp lguest_init+__PAGE_OFFSET
 
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers.  These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers.  These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
 .text
 #define LGUEST_PATCH(name, insns...)                    \
         lgstart_##name: insns; lgend_##name:;           \
@@ -48,83 +53,103 @@ ENTRY(lguest_entry)
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
 
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later).  If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later).  If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
  *
  * I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages.  First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages.  First, the routine to
+ * enable interrupts:
+ */
 ENTRY(lg_irq_enable)
-        /* The reverse of irq_disable, this sets lguest_data.irq_enabled to
-         * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+        /*
+         * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+         * X86_EFLAGS_IF (ie. "Interrupts enabled").
+         */
         movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
-        /* But now we need to check if the Host wants to know: there might have
+        /*
+         * But now we need to check if the Host wants to know: there might have
          * been interrupts waiting to be delivered, in which case it will have
          * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
-         * jump to send_interrupts, otherwise we're done. */
+         * jump to send_interrupts, otherwise we're done.
+         */
         testl $0, lguest_data+LGUEST_DATA_irq_pending
         jnz send_interrupts
-        /* One cool thing about x86 is that you can do many things without using
+        /*
+         * One cool thing about x86 is that you can do many things without using
          * a register.  In this case, the normal path hasn't needed to save or
-         * restore any registers at all! */
+         * restore any registers at all!
+         */
         ret
 send_interrupts:
-        /* OK, now we need a register: eax is used for the hypercall number,
+        /*
+         * OK, now we need a register: eax is used for the hypercall number,
          * which is LHCALL_SEND_INTERRUPTS.
          *
          * We used not to bother with this pending detection at all, which was
          * much simpler.  Sooner or later the Host would realize it had to
          * send us an interrupt.  But that turns out to make performance 7
          * times worse on a simple tcp benchmark.  So now we do this the hard
-         * way. */
+         * way.
+         */
         pushl %eax
         movl $LHCALL_SEND_INTERRUPTS, %eax
-        /* This is a vmcall instruction (same thing that KVM uses).  Older
+        /*
+         * This is a vmcall instruction (same thing that KVM uses).  Older
          * assembler versions might not know the "vmcall" instruction, so we
-         * create one manually here. */
+         * create one manually here.
+         */
         .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+        /* Put eax back the way we found it. */
         popl %eax
         ret
 
-/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine.  The %eax register holds the
  * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
 ENTRY(lg_restore_fl)
         /* This is just "lguest_data.irq_enabled = flags;" */
         movl %eax, lguest_data+LGUEST_DATA_irq_enabled
-        /* Now, if the %eax value has enabled interrupts and
+        /*
+         * Now, if the %eax value has enabled interrupts and
          * lguest_data.irq_pending is set, we want to tell the Host so it can
          * deliver any outstanding interrupts.  Fortunately, both values will
          * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
          * instruction will AND them together for us.  If both are set, we
-         * jump to send_interrupts. */
+         * jump to send_interrupts.
+         */
         testl lguest_data+LGUEST_DATA_irq_pending, %eax
         jnz send_interrupts
         /* Again, the normal path has used no extra registers.  Clever, huh? */
         ret
+/*:*/
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
 .global lguest_noirq_end
 
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it.  However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it.  However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
  *
  * This turns out to be harmless: the only trap which should happen under Linux
  * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
  * regions), which has to be reflected through the Host anyway.  If another
  * trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
 
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last.  It's *cool*!  It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last.  It's *cool*!  It's in *assembler*!
  *
  * The "iret" instruction is used to return from an interrupt or trap.  The
  * stack looks like this:
@@ -148,15 +173,18 @@ ENTRY(lg_restore_fl)
  * return to userspace or wherever.  Our solution to this is to surround the
  * code with lguest_noirq_start: and lguest_noirq_end: labels.  We tell the
  * Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
 ENTRY(lguest_iret)
         pushl   %eax
         movl    12(%esp), %eax
 lguest_noirq_start:
-        /* Note the %ss: segment prefix here.  Normal data accesses use the
+        /*
+         * Note the %ss: segment prefix here.  Normal data accesses use the
          * "ds" segment, but that will have already been restored for whatever
          * we're returning to (such as userspace): we can't trust it.  The %ss:
-         * prefix makes sure we use the stack segment, which is still valid. */
+         * prefix makes sure we use the stack segment, which is still valid.
+         */
         movl    %eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
         popl    %eax
         iret
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 85307cc6e45f..bfae139182ff 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -697,7 +697,7 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
         if (!printk_ratelimit())
                 return;
 
-        printk(KERN_CONT "%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
+        printk("%s%s[%d]: segfault at %lx ip %p sp %p error %lx",
                 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
                 tsk->comm, task_pid_nr(tsk), address,
                 (void *)regs->ip, (void *)regs->sp, error_code);
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e81919..2112ed55e7ea 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
 
 void __init set_highmem_pages_init(void)
 {
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd45456..af8f9650058c 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
         return pte;
 }
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
         pgtable_page_dtor(pte);
         paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 }
 
 #if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
         paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
         tlb_remove_page(tlb, virt_to_page(pmd));
 }
 
 #if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
         paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
         tlb_remove_page(tlb, virt_to_page(pud));
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9df2ae..dbb5381f7b3b 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@ static __init void bad_srat(void)
         acpi_numa = -1;
         for (i = 0; i < MAX_LOCAL_APIC; i++)
                 apicid_to_node[i] = NUMA_NO_NODE;
-        for (i = 0; i < MAX_NUMNODES; i++)
-                nodes_add[i].start = nodes[i].end = 0;
+        for (i = 0; i < MAX_NUMNODES; i++) {
+                nodes[i].start = nodes[i].end = 0;
+                nodes_add[i].start = nodes_add[i].end = 0;
+        }
         remove_all_active_ranges();
 }
 
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 0fb56db16d18..52e62e57fedd 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -35,6 +35,7 @@
 #include <asm/pat.h>
 #include <asm/e820.h>
 #include <asm/pci_x86.h>
+#include <asm/io_apic.h>
 
 
 static int
@@ -227,6 +228,12 @@ void __init pcibios_resource_survey(void)
         pcibios_allocate_resources(1);
 
         e820_reserve_resources_late();
+        /*
+         * Insert the IO APIC resources after PCI initialization has
+         * occured to handle IO APICS that are mapped in on a BAR in
+         * PCI space, but before trying to assign unassigned pci res.
+         */
+        ioapic_insert_resources();
 }
 
 /**
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
index 31c220faca02..0d766f9c1083 100644
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -42,6 +42,6 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)                pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)       pte_free((tlb)->mm, pte)
 
 #endif  /* _XTENSA_TLB_H */
diff --git a/block/blk-core.c b/block/blk-core.c
index 4b45435c6eaf..e3299a77a0d8 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -575,13 +575,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
                 return NULL;
         }
 
-        /*
-         * if caller didn't supply a lock, they get per-queue locking with
-         * our embedded lock
-         */
-        if (!lock)
-                lock = &q->__queue_lock;
-
         q->request_fn           = rfn;
         q->prep_rq_fn           = NULL;
         q->unplug_fn            = generic_unplug_device;
@@ -2143,7 +2136,7 @@ bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
         return blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(blk_end_request);
+EXPORT_SYMBOL(blk_end_request);
 
 /**
  * blk_end_request_all - Helper function for drives to finish the request.
@@ -2164,7 +2157,7 @@ void blk_end_request_all(struct request *rq, int error)
         pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
         BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(blk_end_request_all);
+EXPORT_SYMBOL(blk_end_request_all);
 
 /**
  * blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2182,7 +2175,7 @@ bool blk_end_request_cur(struct request *rq, int error)
 {
         return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(blk_end_request_cur);
+EXPORT_SYMBOL(blk_end_request_cur);
 
 /**
  * __blk_end_request - Helper function for drivers to complete the request.
@@ -2201,7 +2194,7 @@ bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
         return __blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL(__blk_end_request);
 
 /**
  * __blk_end_request_all - Helper function for drives to finish the request.
@@ -2222,7 +2215,7 @@ void __blk_end_request_all(struct request *rq, int error)
         pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
         BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_all);
+EXPORT_SYMBOL(__blk_end_request_all);
 
 /**
  * __blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2241,7 +2234,7 @@ bool __blk_end_request_cur(struct request *rq, int error)
 {
         return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_cur);
+EXPORT_SYMBOL(__blk_end_request_cur);
 
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
                      struct bio *bio)
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 73e28d355688..15c630813b1c 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -379,6 +379,7 @@ void blk_integrity_unregister(struct gendisk *disk)
 
         kobject_uevent(&bi->kobj, KOBJ_REMOVE);
         kobject_del(&bi->kobj);
+        kobject_put(&bi->kobj);
         kmem_cache_free(integrity_cachep, bi);
         disk->integrity = NULL;
 }
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bd582a7f5310..8a3ea3bba10d 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -165,6 +165,13 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
         blk_set_default_limits(&q->limits);
 
         /*
+         * If the caller didn't supply a lock, fall back to our embedded
+         * per-queue locks
+         */
+        if (!q->queue_lock)
+                q->queue_lock = &q->__queue_lock;
+
+        /*
          * by default assume old behaviour and bounce for any highmem page
          */
         blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b1cd04087d6a..418d63619680 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -16,9 +16,9 @@ struct queue_sysfs_entry {
 };
 
 static ssize_t
-queue_var_show(unsigned int var, char *page)
+queue_var_show(unsigned long var, char *page)
 {
-        return sprintf(page, "%d\n", var);
+        return sprintf(page, "%lu\n", var);
 }
 
 static ssize_t
@@ -77,7 +77,8 @@ queue_requests_store(struct request_queue *q, const char *page, size_t count)
 
 static ssize_t queue_ra_show(struct request_queue *q, char *page)
 {
-        int ra_kb = q->backing_dev_info.ra_pages << (PAGE_CACHE_SHIFT - 10);
+        unsigned long ra_kb = q->backing_dev_info.ra_pages <<
+                                        (PAGE_CACHE_SHIFT - 10);
 
         return queue_var_show(ra_kb, (page));
 }
@@ -189,9 +190,9 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page,
 
 static ssize_t queue_rq_affinity_show(struct request_queue *q, char *page)
 {
-        unsigned int set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
+        bool set = test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags);
 
-        return queue_var_show(set != 0, page);
+        return queue_var_show(set, page);
 }
 
 static ssize_t
diff --git a/block/elevator.c b/block/elevator.c
index 6f2375339a99..2d511f9105e1 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -101,11 +101,16 @@ int elv_rq_merge_ok(struct request *rq, struct bio *bio)
                 return 0;
 
         /*
-         * Don't merge if failfast settings don't match
+         * Don't merge if failfast settings don't match.
+         *
+         * FIXME: The negation in front of each condition is necessary
+         * because bio and request flags use different bit positions
+         * and the accessors return those bits directly.  This
+         * ugliness will soon go away.
          */
-        if (bio_failfast_dev(bio)       != blk_failfast_dev(rq)         ||
-            bio_failfast_transport(bio) != blk_failfast_transport(rq)   ||
-            bio_failfast_driver(bio)    != blk_failfast_driver(rq))
+        if (!bio_failfast_dev(bio)       != !blk_failfast_dev(rq)       ||
+            !bio_failfast_transport(bio) != !blk_failfast_transport(rq) ||
+            !bio_failfast_driver(bio)    != !blk_failfast_driver(rq))
                 return 0;
 
         if (!elv_iosched_allow_merge(rq, bio))
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 95fe2c8d6c51..90dd3f8bd283 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum);
 
 static int __init async_xor_init(void)
 {
-        #ifdef CONFIG_DMA_ENGINE
+        #ifdef CONFIG_ASYNC_TX_DMA
         /* To conserve stack space the input src_list (array of page pointers)
          * is reused to hold the array of dma addresses passed to the driver.
          * This conversion is only possible when dma_addr_t is less than the
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 01574a066534..42159a28f433 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -397,6 +397,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
                 },
         },
         {
+        .callback = init_set_sci_en_on_resume,
+        .ident = "Hewlett-Packard HP G7000 Notebook PC",
+        .matches = {
+                DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+                DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+                },
+        },
+        {
         .callback = init_old_suspend_ordering,
         .ident = "Panasonic CF51-2L",
         .matches = {
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 15a23031833f..958c1fa41900 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -513,11 +513,16 @@ static const struct pci_device_id ahci_pci_tbl[] = {
         { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
         { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
         { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
+        { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
         { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+        { PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+        { PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
         { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
         { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
         { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
         { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+        { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
 
         /* JMicron 360/1/3/5/6, match class to avoid IDE function */
         { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d0a14cf2bd74..56b8a3ff1286 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -596,9 +596,12 @@ static const struct ich_laptop ich_laptop[] = {
         { 0x27DF, 0x0005, 0x0280 },     /* ICH7 on Acer 5602WLMi */
         { 0x27DF, 0x1025, 0x0102 },     /* ICH7 on Acer 5602aWLMi */
         { 0x27DF, 0x1025, 0x0110 },     /* ICH7 on Acer 3682WLMi */
+        { 0x27DF, 0x1028, 0x02b0 },     /* ICH7 on unknown Dell */
         { 0x27DF, 0x1043, 0x1267 },     /* ICH7 on Asus W5F */
         { 0x27DF, 0x103C, 0x30A1 },     /* ICH7 on HP Compaq nc2400 */
+        { 0x27DF, 0x103C, 0x361a },     /* ICH7 on unkown HP  */
         { 0x27DF, 0x1071, 0xD221 },     /* ICH7 on Hercules EC-900 */
+        { 0x27DF, 0x152D, 0x0778 },     /* ICH7 on unknown Intel */
         { 0x24CA, 0x1025, 0x0061 },     /* ICH4 on ACER Aspire 2023WLMi */
         { 0x24CA, 0x1025, 0x003d },     /* ICH4 on ACER TM290 */
         { 0x266F, 0x1025, 0x0066 },     /* ICH6 on ACER Aspire 1694WLMi */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 045a486a09ea..8ac98ff16d7d 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1515,6 +1515,7 @@ static int ata_hpa_resize(struct ata_device *dev)
 
                 return rc;
         }
+        dev->n_native_sectors = native_sectors;
 
         /* nothing to do? */
         if (native_sectors <= sectors || !ata_ignore_hpa) {
@@ -3392,17 +3393,27 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
 
 static int ata_dev_set_mode(struct ata_device *dev)
 {
+        struct ata_port *ap = dev->link->ap;
         struct ata_eh_context *ehc = &dev->link->eh_context;
+        const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
         const char *dev_err_whine = "";
         int ign_dev_err = 0;
-        unsigned int err_mask;
+        unsigned int err_mask = 0;
         int rc;
 
         dev->flags &= ~ATA_DFLAG_PIO;
         if (dev->xfer_shift == ATA_SHIFT_PIO)
                 dev->flags |= ATA_DFLAG_PIO;
 
-        err_mask = ata_dev_set_xfermode(dev);
+        if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
+                dev_err_whine = " (SET_XFERMODE skipped)";
+        else {
+                if (nosetxfer)
+                        ata_dev_printk(dev, KERN_WARNING,
+                                       "NOSETXFER but PATA detected - can't "
+                                       "skip SETXFER, might malfunction\n");
+                err_mask = ata_dev_set_xfermode(dev);
+        }
 
         if (err_mask & ~AC_ERR_DEV)
                 goto fail;
@@ -4089,6 +4100,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
                        unsigned int readid_flags)
 {
         u64 n_sectors = dev->n_sectors;
+        u64 n_native_sectors = dev->n_native_sectors;
         int rc;
 
         if (!ata_dev_enabled(dev))
@@ -4118,16 +4130,30 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
         /* verify n_sectors hasn't changed */
         if (dev->class == ATA_DEV_ATA && n_sectors &&
             dev->n_sectors != n_sectors) {
-                ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+                ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
                                "%llu != %llu\n",
                                (unsigned long long)n_sectors,
                                (unsigned long long)dev->n_sectors);
-
-                /* restore original n_sectors */
-                dev->n_sectors = n_sectors;
-
-                rc = -ENODEV;
-                goto fail;
+                /*
+                 * Something could have caused HPA to be unlocked
+                 * involuntarily.  If n_native_sectors hasn't changed
+                 * and the new size matches it, keep the device.
+                 */
+                if (dev->n_native_sectors == n_native_sectors &&
+                    dev->n_sectors > n_sectors &&
+                    dev->n_sectors == n_native_sectors) {
+                        ata_dev_printk(dev, KERN_WARNING,
+                                       "new n_sectors matches native, probably "
+                                       "late HPA unlock, continuing\n");
+                        /* keep using the old n_sectors */
+                        dev->n_sectors = n_sectors;
+                } else {
+                        /* restore original n_[native]_sectors and fail */
+                        dev->n_native_sectors = n_native_sectors;
+                        dev->n_sectors = n_sectors;
+                        rc = -ENODEV;
+                        goto fail;
+                }
         }
 
         return 0;
@@ -4297,6 +4323,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         /* Devices which aren't very happy with higher link speeds */
         { "WD My Book",                 NULL,   ATA_HORKAGE_1_5_GBPS, },
 
+        /*
+         * Devices which choke on SETXFER.  Applies only if both the
+         * device and controller are SATA.
+         */
+        { "PIONEER DVD-RW  DVRTD08",    "1.00", ATA_HORKAGE_NOSETXFER },
+
         /* End Marker */
         { }
 };
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index fa22f94ca415..79711b64054b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2327,7 +2327,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         struct ata_port *ap = link->ap;
         struct ata_link *slave = ap->slave_link;
         struct ata_eh_context *ehc = &link->eh_context;
-        struct ata_eh_context *sehc = &slave->eh_context;
+        struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
         unsigned int *classes = ehc->classes;
         unsigned int lflags = link->flags;
         int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
@@ -2517,6 +2517,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 
                         ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
                         rc = ata_do_reset(link, reset, classes, deadline, true);
+                        if (rc) {
+                                failed_link = link;
+                                goto fail;
+                        }
                 }
         } else {
                 if (verbose)
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 4b27617be26d..5702affcb325 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -26,9 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
-#include <mach/at91sam9260_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -44,65 +42,62 @@ struct at91_ide_info {
         unsigned long mode;
         unsigned int cs;
 
+        struct clk *mck;
+
         void __iomem *ide_addr;
         void __iomem *alt_addr;
 };
 
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
         {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
 
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
         unsigned long mul;
 
-    /*
-     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-     *     x * (f / 1_000_000_000) =
-     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
-     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-     */
+        /*
+        * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+        *     x * (f / 1_000_000_000) =
+        *     x * ((f * 65536) / 1_000_000_000) / 65536 =
+        *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+        */
 
-    mul = (mck_hz / 10000) << 16;
-    mul /= 100000;
+        mul = (mck_hz / 10000) << 16;
+        mul /= 100000;
 
-    return (ns * mul + 65536) >> 16;    /* rounding */
+        return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
 static void set_smc_mode(struct at91_ide_info *info)
 {
-    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-    return;
+        at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+        return;
 }
 
 static void set_smc_timing(struct device *dev,
                 struct at91_ide_info *info, const struct ata_timing *ata)
 {
-        int read_cycle, write_cycle, active, recover;
-        int nrd_setup, nrd_pulse, nrd_recover;
-        int nwe_setup, nwe_pulse;
+        unsigned long read_cycle, write_cycle, active, recover;
+        unsigned long nrd_setup, nrd_pulse, nrd_recover;
+        unsigned long nwe_setup, nwe_pulse;
 
-        int ncs_write_setup, ncs_write_pulse;
-        int ncs_read_setup, ncs_read_pulse;
+        unsigned long ncs_write_setup, ncs_write_pulse;
+        unsigned long ncs_read_setup, ncs_read_pulse;
 
-        unsigned int mck_hz;
-        struct clk *mck;
+        unsigned long mck_hz;
 
         read_cycle  = ata->cyc8b;
         nrd_setup   = ata->setup;
         nrd_pulse   = ata->act8b;
         nrd_recover = ata->rec8b;
 
-        mck = clk_get(NULL, "mck");
-        BUG_ON(IS_ERR(mck));
-        mck_hz = clk_get_rate(mck);
+        mck_hz = clk_get_rate(info->mck);
 
         read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
         nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
         nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
         nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
 
-        clk_put(mck);
-
         active  = nrd_setup + nrd_pulse;
         recover = read_cycle - active;
 
@@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev,
         ncs_write_setup = ncs_read_setup;
         ncs_write_pulse = ncs_read_pulse;
 
-        dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+        dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
                         nrd_setup, nrd_pulse, read_cycle);
-        dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+        dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
                         nwe_setup, nwe_pulse, write_cycle);
-        dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+        dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
                         ncs_read_setup, ncs_read_pulse);
-        dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+        dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
                         ncs_write_setup, ncs_write_pulse);
 
         at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         struct resource *mem_res;
         struct ata_host *host;
         struct ata_port *ap;
+
         int irq_flags = 0;
         int irq = 0;
         int ret;
@@ -261,6 +257,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                 return -ENOMEM;
         }
 
+        info->mck = clk_get(NULL, "mck");
+
+        if (IS_ERR(info->mck)) {
+                dev_err(dev, "failed to get access to mck clock\n");
+                return -ENODEV;
+        }
+
         info->cs    = board->chipselect;
         info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
                 AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -304,6 +307,7 @@ err_alt_ioremap:
         devm_iounmap(dev, info->ide_addr);
 
 err_ide_ioremap:
+        clk_put(info->mck);
         kfree(info);
 
         return ret;
@@ -312,11 +316,12 @@ err_ide_ioremap:
 static int __devexit pata_at91_remove(struct platform_device *pdev)
 {
         struct ata_host *host = dev_get_drvdata(&pdev->dev);
-        struct at91_ide_info *info = host->private_data;
+        struct at91_ide_info *info;
         struct device *dev = &pdev->dev;
 
         if (!host)
                 return 0;
+        info = host->private_data;
 
         ata_host_detach(host);
 
@@ -325,6 +330,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 
         devm_iounmap(dev, info->ide_addr);
         devm_iounmap(dev, info->alt_addr);
+        clk_put(info->mck);
 
         kfree(info);
         return 0;
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 8d9343accf3c..abdd19fe990a 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,7 +653,8 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
                 ap = host->ports[i];
                 ocd = ap->dev->platform_data;
-                if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+                if (ap->flags & ATA_FLAG_DISABLED)
                         continue;
 
                 ocd = ap->dev->platform_data;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009ed50ac..dc99e26f8e5b 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -411,6 +411,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
         PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+        PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
         PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
         PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 23714aefb825..c19417e02208 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2514,7 +2514,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
         char *when = "idle";
 
         ata_ehi_clear_desc(ehi);
-        if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+        if (ap->flags & ATA_FLAG_DISABLED) {
                 when = "disabled";
         } else if (edma_was_enabled) {
                 when = "EDMA enabled";
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 030ec079b184..35bd5cc7f285 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -532,7 +532,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
                 struct ata_port *ap = host->ports[i];
                 u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
 
-                if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+                if (unlikely(ap->flags & ATA_FLAG_DISABLED))
                         continue;
 
                 /* turn off SATA_IRQ if not supported */
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e8beb8e5b626..05dd307e8f02 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -428,6 +428,9 @@ int devres_release_all(struct device *dev)
 {
         unsigned long flags;
 
+        /* Looks like an uninitialized device structure */
+        if (WARN_ON(dev->devres_head.next == NULL))
+                return -ENODEV;
         spin_lock_irqsave(&dev->devres_lock, flags);
         return release_nodes(dev, dev->devres_head.next, &dev->devres_head,
                              flags);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index fc466531260e..7376367bcb80 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -180,7 +180,6 @@ static ssize_t firmware_loading_store(struct device *dev,
                                 goto err;
                         }
                         /* Pages will be freed by vfree() */
-                        fw_priv->pages = NULL;
                         fw_priv->page_array_size = 0;
                         fw_priv->nr_pages = 0;
                         complete(&fw_priv->completion);
@@ -217,8 +216,10 @@ firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
                 ret_count = -ENODEV;
                 goto out;
         }
-        if (offset > fw->size)
-                return 0;
+        if (offset > fw->size) {
+                ret_count = 0;
+                goto out;
+        }
         if (count > fw->size - offset)
                 count = fw->size - offset;
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 79a9ae5238ac..0d903909af7e 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -275,9 +275,9 @@ int sysdev_register(struct sys_device *sysdev)
                                 drv->add(sysdev);
                 }
                 mutex_unlock(&sysdev_drivers_lock);
+                kobject_uevent(&sysdev->kobj, KOBJ_ADD);
         }
 
-        kobject_uevent(&sysdev->kobj, KOBJ_ADD);
         return error;
 }
 
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 668dc234b8e2..1e6b7c14f697 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -36,6 +36,7 @@
 #include <linux/ioport.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/proc_fs.h>
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index f5e7180d7f47..3ff02941b3dd 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1627,7 +1627,7 @@ static int fd_ioctl(struct block_device *bdev, fmode_t mode,
                                 drive, dtp->blocks, dtp->spt, dtp->stretch);
 
                 /* sanity check */
-                if (!dtp || setprm.track != dtp->blocks/dtp->spt/2 ||
+                if (setprm.track != dtp->blocks/dtp->spt/2 ||
                     setprm.head != 2) {
                         redo_fd_request();
                         return -EINVAL;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 65a0655e7fc8..a52cc7fe45ea 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -26,6 +26,7 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/major.h>
 #include <linux/fs.h>
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 801f4ab83302..5757188cd1fb 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -61,7 +61,6 @@
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/swap.h>
 #include <linux/slab.h>
 #include <linux/loop.h>
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f703f5478246..6d7fbaa92248 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -36,7 +36,6 @@
 
 /* Register offsets */
 #define MG_BUFF_OFFSET                  0x8000
-#define MG_STORAGE_BUFFER_SIZE          0x200
 #define MG_REG_OFFSET                   0xC000
 #define MG_REG_FEATURE                  (MG_REG_OFFSET + 2)     /* write case */
 #define MG_REG_ERROR                    (MG_REG_OFFSET + 2)     /* read case */
@@ -219,6 +218,16 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
         host->error = MG_ERR_NONE;
         expire = jiffies + msecs_to_jiffies(msec);
 
+        /* These 2 times dummy status read prevents reading invalid
+         * status. A very little time (3 times of mflash operating clk)
+         * is required for busy bit is set. Use dummy read instead of
+         * busy wait, because mflash's PLL is machine dependent.
+         */
+        if (prv_data->use_polling) {
+                status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+                status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+        }
+
         status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
 
         do {
@@ -245,8 +254,6 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
                         mg_dump_status("not ready", status, host);
                         return MG_ERR_INV_STAT;
                 }
-                if (prv_data->use_polling)
-                        msleep(1);
 
                 status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
         } while (time_before(cur_jiffies, expire));
@@ -469,9 +476,18 @@ static unsigned int mg_out(struct mg_host *host,
         return MG_ERR_NONE;
 }
 
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+        u16 *buff = (u16 *)req->buffer;
+        u32 i;
+
+        for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+                *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+                              (i << 1));
+}
+
 static void mg_read(struct request *req)
 {
-        u32 j;
         struct mg_host *host = req->rq_disk->private_data;
 
         if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
@@ -482,49 +498,65 @@ static void mg_read(struct request *req)
                blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
 
         do {
-                u16 *buff = (u16 *)req->buffer;
-
                 if (mg_wait(host, ATA_DRQ,
                             MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
                         mg_bad_rw_intr(host);
                         return;
                 }
-                for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-                        *buff++ = inw((unsigned long)host->dev_base +
-                                      MG_BUFF_OFFSET + (j << 1));
+
+                mg_read_one(host, req);
 
                 outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
                                 MG_REG_COMMAND);
         } while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+        u16 *buff = (u16 *)req->buffer;
+        u32 i;
+
+        for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+                outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+                     (i << 1));
+}
+
 static void mg_write(struct request *req)
 {
-        u32 j;
         struct mg_host *host = req->rq_disk->private_data;
+        unsigned int rem = blk_rq_sectors(req);
 
-        if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+        if (mg_out(host, blk_rq_pos(req), rem,
                    MG_CMD_WR, NULL) != MG_ERR_NONE) {
                 mg_bad_rw_intr(host);
                 return;
         }
 
         MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
-               blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+               rem, blk_rq_pos(req), req->buffer);
+
+        if (mg_wait(host, ATA_DRQ,
+                    MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+                mg_bad_rw_intr(host);
+                return;
+        }
 
         do {
-                u16 *buff = (u16 *)req->buffer;
+                mg_write_one(host, req);
 
-        if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+                outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
+                                MG_REG_COMMAND);
+
+                rem--;
+                if (rem > 1 && mg_wait(host, ATA_DRQ,
+                                        MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+                        mg_bad_rw_intr(host);
+                        return;
+                } else if (mg_wait(host, MG_STAT_READY,
+                                        MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
                         mg_bad_rw_intr(host);
                         return;
                 }
-                for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-                        outw(*buff++, (unsigned long)host->dev_base +
-                                      MG_BUFF_OFFSET + (j << 1));
-
-                outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
-                                MG_REG_COMMAND);
         } while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
@@ -532,7 +564,6 @@ static void mg_read_intr(struct mg_host *host)
 {
         struct request *req = host->req;
         u32 i;
-        u16 *buff;
 
         /* check status */
         do {
@@ -550,13 +581,7 @@ static void mg_read_intr(struct mg_host *host)
         return;
 
 ok_to_read:
-        /* get current segment of request */
-        buff = (u16 *)req->buffer;
-
-        /* read 1 sector */
-        for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
-                *buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
-                              (i << 1));
+        mg_read_one(host, req);
 
         MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
                blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
@@ -575,8 +600,7 @@ ok_to_read:
 static void mg_write_intr(struct mg_host *host)
 {
         struct request *req = host->req;
-        u32 i, j;
-        u16 *buff;
+        u32 i;
         bool rem;
 
         /* check status */
@@ -597,12 +621,7 @@ static void mg_write_intr(struct mg_host *host)
 ok_to_write:
         if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
                 /* write 1 sector and set handler if remains */
-                buff = (u16 *)req->buffer;
-                for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
-                        outw(*buff, (unsigned long)host->dev_base +
-                                        MG_BUFF_OFFSET + (j << 1));
-                        buff++;
-                }
+                mg_write_one(host, req);
                 MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
                        blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
                 host->mg_do_intr = mg_write_intr;
@@ -667,9 +686,6 @@ static unsigned int mg_issue_req(struct request *req,
                 unsigned int sect_num,
                 unsigned int sect_cnt)
 {
-        u16 *buff;
-        u32 i;
-
         switch (rq_data_dir(req)) {
         case READ:
                 if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
@@ -693,12 +709,7 @@ static unsigned int mg_issue_req(struct request *req,
                         mg_bad_rw_intr(host);
                         return host->error;
                 }
-                buff = (u16 *)req->buffer;
-                for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
-                        outw(*buff, (unsigned long)host->dev_base +
-                                        MG_BUFF_OFFSET + (i << 1));
-                        buff++;
-                }
+                mg_write_one(host, req);
                 mod_timer(&host->timer, jiffies + 3 * HZ);
                 outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
                                 MG_REG_COMMAND);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 43db3ea15b54..aa1a3d5a3e2b 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -213,7 +213,7 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
          * Only allow the generic SCSI ioctls if the host can support it.
          */
         if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
-                return -ENOIOCTLCMD;
+                return -ENOTTY;
 
         return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
 }
@@ -360,6 +360,9 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
         blk_queue_max_phys_segments(vblk->disk->queue, vblk->sg_elems-2);
         blk_queue_max_hw_segments(vblk->disk->queue, vblk->sg_elems-2);
 
+        /* No need to bounce any requests */
+        blk_queue_bounce_limit(vblk->disk->queue, BLK_BOUNCE_ANY);
+
         /* No real sector limit. */
         blk_queue_max_sectors(vblk->disk->queue, -1U);
 
@@ -424,7 +427,12 @@ static unsigned int features[] = {
         VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY
 };
 
-static struct virtio_driver virtio_blk = {
+/*
+ * virtio_blk causes spurious section mismatch warning by
+ * simultaneously referring to a __devinit and a __devexit function.
+ * Use __refdata to avoid this warning.
+ */
+static struct virtio_driver __refdata virtio_blk = {
         .feature_table = features,
         .feature_table_size = ARRAY_SIZE(features),
         .driver.name =  KBUILD_MODNAME,
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 4575171e5beb..b2590409f25e 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -374,7 +374,7 @@ err:
 static void __exit z2_exit(void)
 {
     int i, j;
-    blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), 256);
+    blk_unregister_region(MKDEV(Z2RAM_MAJOR, 0), Z2MINOR_COUNT);
     unregister_blkdev(Z2RAM_MAJOR, DEVICE_NAME);
     del_gendisk(z2ram_gendisk);
     put_disk(z2ram_gendisk);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 1df9dda2e377..d5cde6d86f89 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 72429b6b2fa8..6c32fbf07164 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,6 +81,7 @@ static char *serial_version = "4.30";
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index f3366d3f06cf..2dafc2da0648 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -633,6 +633,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
diff --git a/drivers/char/epca.c b/drivers/char/epca.c
index abef1f7d84fe..ff647ca1c489 100644
--- a/drivers/char/epca.c
+++ b/drivers/char/epca.c
@@ -36,6 +36,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 94e7e3c8c05a..d97779ef72cb 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -552,7 +552,7 @@ static int hvc_chars_in_buffer(struct tty_struct *tty)
         struct hvc_struct *hp = tty->driver_data;
 
         if (!hp)
-                return -1;
+                return 0;
         return hp->n_outbuf;
 }
 
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index 621d1184673c..4f1f4cd670da 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -122,6 +122,7 @@
 #include <linux/fs.h>
 #include <linux/sched.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 0c999f5bb3db..ab2f3349c5c4 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -20,6 +20,7 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 65b6ff2442c6..dd0083bbb64a 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -34,6 +34,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 52d953eb30c3..dbf8d52f31d0 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -23,6 +23,7 @@
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
diff --git a/drivers/char/n_hdlc.c b/drivers/char/n_hdlc.c
index 1c43c8cdee25..c68118efad84 100644
--- a/drivers/char/n_hdlc.c
+++ b/drivers/char/n_hdlc.c
@@ -97,6 +97,7 @@
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>       /* used in new tty drivers */
 #include <linux/signal.h>       /* used in new tty drivers */
 #include <linux/if.h>
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 2e99158ebb8a..6934025a1ac1 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -58,6 +58,7 @@
 #include <linux/ioport.h>
 #include <linux/in.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/errno.h>
 #include <linux/string.h>       /* used in new tty drivers */
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 94a5d5020abc..973be2f44195 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1331,9 +1331,6 @@ handle_newline:
 
 static void n_tty_write_wakeup(struct tty_struct *tty)
 {
-        /* Write out any echoed characters that are still pending */
-        process_echoes(tty);
-
         if (tty->fasync && test_and_clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags))
                 kill_fasync(&tty->fasync, SIGIO, POLL_OUT);
 }
@@ -1586,6 +1583,7 @@ static int n_tty_open(struct tty_struct *tty)
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
+        tty_flush_to_ldisc(tty);
         if (tty->icanon) {
                 if (tty->canon_data)
                         return 1;
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 574f1c79b6e6..ec58d8c387ff 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -828,7 +828,7 @@ static int receive_data(enum port_type index, struct nozomi *dc)
         struct port *port = &dc->port[index];
         void __iomem *addr = port->dl_addr[port->toggle_dl];
         struct tty_struct *tty = tty_port_tty_get(&port->port);
-        int i;
+        int i, ret;
 
         if (unlikely(!tty)) {
                 DBG1("tty not open for port: %d?", index);
@@ -844,12 +844,14 @@ static int receive_data(enum port_type index, struct nozomi *dc)
 
                 /* disable interrupt in downlink... */
                 disable_transmit_dl(index, dc);
-                return 0;
+                ret = 0;
+                goto put;
         }
 
         if (unlikely(size == 0)) {
                 dev_err(&dc->pdev->dev, "size == 0?\n");
-                return 1;
+                ret = 1;
+                goto put;
         }
 
         tty_buffer_request_room(tty, size);
@@ -871,8 +873,10 @@ static int receive_data(enum port_type index, struct nozomi *dc)
         }
 
         set_bit(index, &dc->flip);
+        ret = 1;
+put:
         tty_kref_put(tty);
-        return 1;
+        return ret;
 }
 
 /* Debug for interrupts */
@@ -1862,16 +1866,14 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty)
 {
         struct port *port = tty->driver_data;
         struct nozomi *dc = get_dc_by_tty(tty);
-        s32 rval;
+        s32 rval = 0;
 
         if (unlikely(!dc || !port)) {
-                rval = -ENODEV;
                 goto exit_in_buffer;
         }
 
         if (unlikely(!port->port.count)) {
                 dev_err(&dc->pdev->dev, "No tty open?\n");
-                rval = -ENODEV;
                 goto exit_in_buffer;
         }
 
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 569f2f7743a7..674b3ab3587d 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -320,10 +320,10 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
         struct ipw_tty *tty = linux_tty->driver_data;
 
         if (!tty)
-                return -ENODEV;
+                return 0;
 
         if (!tty->open_count)
-                return -EINVAL;
+                return 0;
 
         return tty->tx_bytes_queued;
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 9d1b4f548f67..6e6942c45f5b 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -22,6 +22,7 @@
 #include <linux/major.h>
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/sysctl.h>
 #include <linux/device.h>
 #include <linux/uaccess.h>
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index ce81da5b2da9..d58c2eb07f07 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -44,6 +44,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/miscdevice.h>
 #include <linux/init.h>
 
diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c
index 217660451237..171711acf5cd 100644
--- a/drivers/char/riscom8.c
+++ b/drivers/char/riscom8.c
@@ -47,6 +47,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/tty_flip.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 63d5b628477a..0e29a23ec4c5 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -73,6 +73,7 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f1f24f0ee26f..51e7a46787be 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,6 +52,7 @@
 #include <linux/interrupt.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index e72be4190a44..268e17f9ec3f 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,6 +87,7 @@
 #include <linux/tty_flip.h>
 #include <linux/mm.h>
 #include <linux/serial.h>
+#include <linux/smp_lock.h>
 #include <linux/fcntl.h>
 #include <linux/major.h>
 #include <linux/delay.h>
@@ -1808,10 +1809,10 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
                 if (clear & TIOCM_DTR)
                         port->MSVR &= ~MSVR_DTR;
         }
-        spin_lock_irqsave(&bp->lock, flags);
+        spin_lock(&bp->lock);
         sx_out(bp, CD186x_CAR, port_No(port));
         sx_out(bp, CD186x_MSVR, port->MSVR);
-        spin_unlock_irqrestore(&bp->lock, flags);
+        spin_unlock(&bp->lock);
         spin_unlock_irqrestore(&port->lock, flags);
         func_exit();
         return 0;
@@ -1832,11 +1833,11 @@ static int sx_send_break(struct tty_struct *tty, int length)
         port->break_length = SPECIALIX_TPS / HZ * length;
         port->COR2 |= COR2_ETC;
         port->IER  |= IER_TXRDY;
-        spin_lock_irqsave(&bp->lock, flags);
+        spin_lock(&bp->lock);
         sx_out(bp, CD186x_CAR, port_No(port));
         sx_out(bp, CD186x_COR2, port->COR2);
         sx_out(bp, CD186x_IER, port->IER);
-        spin_unlock_irqrestore(&bp->lock, flags);
+        spin_unlock(&bp->lock);
         spin_unlock_irqrestore(&port->lock, flags);
         sx_wait_CCR(bp);
         spin_lock_irqsave(&bp->lock, flags);
@@ -2022,9 +2023,9 @@ static void sx_unthrottle(struct tty_struct *tty)
         if (sx_crtscts(tty))
                 port->MSVR |= MSVR_DTR;
         /* Else clause: see remark in "sx_throttle"... */
-        spin_lock_irqsave(&bp->lock, flags);
+        spin_lock(&bp->lock);
         sx_out(bp, CD186x_CAR, port_No(port));
-        spin_unlock_irqrestore(&bp->lock, flags);
+        spin_unlock(&bp->lock);
         if (I_IXOFF(tty)) {
                 spin_unlock_irqrestore(&port->lock, flags);
                 sx_wait_CCR(bp);
@@ -2034,9 +2035,9 @@ static void sx_unthrottle(struct tty_struct *tty)
                 sx_wait_CCR(bp);
                 spin_lock_irqsave(&port->lock, flags);
         }
-        spin_lock_irqsave(&bp->lock, flags);
+        spin_lock(&bp->lock);
         sx_out(bp, CD186x_MSVR, port->MSVR);
-        spin_unlock_irqrestore(&bp->lock, flags);
+        spin_unlock(&bp->lock);
         spin_unlock_irqrestore(&port->lock, flags);
 
         func_exit();
@@ -2060,10 +2061,10 @@ static void sx_stop(struct tty_struct *tty)
 
         spin_lock_irqsave(&port->lock, flags);
         port->IER &= ~IER_TXRDY;
-        spin_lock_irqsave(&bp->lock, flags);
+        spin_lock(&bp->lock);
         sx_out(bp, CD186x_CAR, port_No(port));
         sx_out(bp, CD186x_IER, port->IER);
-        spin_unlock_irqrestore(&bp->lock, flags);
+        spin_unlock(&bp->lock);
         spin_unlock_irqrestore(&port->lock, flags);
 
         func_exit();
@@ -2088,10 +2089,10 @@ static void sx_start(struct tty_struct *tty)
         spin_lock_irqsave(&port->lock, flags);
         if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
                 port->IER |= IER_TXRDY;
-                spin_lock_irqsave(&bp->lock, flags);
+                spin_lock(&bp->lock);
                 sx_out(bp, CD186x_CAR, port_No(port));
                 sx_out(bp, CD186x_IER, port->IER);
-                spin_unlock_irqrestore(&bp->lock, flags);
+                spin_unlock(&bp->lock);
         }
         spin_unlock_irqrestore(&port->lock, flags);
 
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 518f2a25d91e..a81ec4fcf6ff 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,6 +216,7 @@
 #include <linux/eisa.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/bitops.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index afded3a2379c..813552f14884 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -81,6 +81,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a2e67e6df3a1..91f20a92fddf 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -62,6 +62,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c
index 6f727e3c53ad..8d4a2a8a0a70 100644
--- a/drivers/char/synclinkmp.c
+++ b/drivers/char/synclinkmp.c
@@ -52,6 +52,7 @@
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 0db35857e4d8..5d7a02f63e1c 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
 #include <linux/spinlock.h>
 #include <linux/vt_kern.h>
 #include <linux/workqueue.h>
-#include <linux/kexec.h>
 #include <linux/hrtimer.h>
 #include <linux/oom.h>
 
@@ -124,9 +123,12 @@ static struct sysrq_key_op sysrq_unraw_op = {
 static void sysrq_handle_crash(int key, struct tty_struct *tty)
 {
         char *killer = NULL;
+
+        panic_on_oops = 1;      /* force panic */
+        wmb();
         *killer = 1;
 }
-static struct sysrq_key_op sysrq_crashdump_op = {
+static struct sysrq_key_op sysrq_crash_op = {
         .handler        = sysrq_handle_crash,
         .help_msg       = "Crash",
         .action_msg     = "Trigger a crash",
@@ -401,7 +403,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
          */
         NULL,                           /* a */
         &sysrq_reboot_op,               /* b */
-        &sysrq_crashdump_op,            /* c & ibm_emac driver debug */
+        &sysrq_crash_op,                /* c & ibm_emac driver debug */
         &sysrq_showlocks_op,            /* d */
         &sysrq_term_op,                 /* e */
         &sysrq_moom_op,                 /* f */
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index ccdd828adcef..b0603b2e5684 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -26,7 +26,6 @@
 #include <linux/poll.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
 
 #include "tpm.h"
 
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 810ee25d66a4..3108991c5c8b 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -462,6 +462,19 @@ static void flush_to_ldisc(struct work_struct *work)
 }
 
 /**
+ *      tty_flush_to_ldisc
+ *      @tty: tty to push
+ *
+ *      Push the terminal flip buffers to the line discipline.
+ *
+ *      Must not be called from IRQ context.
+ */
+void tty_flush_to_ldisc(struct tty_struct *tty)
+{
+        flush_to_ldisc(&tty->buf.work.work);
+}
+
+/**
  *      tty_flip_buffer_push    -       terminal
  *      @tty: tty to push
  *
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index b24f6c6a1ea3..ad6ba4ed2808 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index 913aa8d3f1c5..acd76b767d4c 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -21,7 +21,6 @@
 #include <linux/proc_fs.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/wait.h>
 #include <linux/bitops.h>
@@ -791,17 +790,20 @@ void tty_ldisc_hangup(struct tty_struct *tty)
          * N_TTY.
          */
         if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
-                /* Avoid racing set_ldisc */
+                /* Avoid racing set_ldisc or tty_ldisc_release */
                 mutex_lock(&tty->ldisc_mutex);
-                /* Switch back to N_TTY */
-                tty_ldisc_halt(tty);
-                tty_ldisc_wait_idle(tty);
-                tty_ldisc_reinit(tty);
-                /* At this point we have a closed ldisc and we want to
-                   reopen it. We could defer this to the next open but
-                   it means auditing a lot of other paths so this is a FIXME */
-                WARN_ON(tty_ldisc_open(tty, tty->ldisc));
-                tty_ldisc_enable(tty);
+                if (tty->ldisc) {       /* Not yet closed */
+                        /* Switch back to N_TTY */
+                        tty_ldisc_halt(tty);
+                        tty_ldisc_wait_idle(tty);
+                        tty_ldisc_reinit(tty);
+                        /* At this point we have a closed ldisc and we want to
+                           reopen it. We could defer this to the next open but
+                           it means auditing a lot of other paths so this is
+                           a FIXME */
+                        WARN_ON(tty_ldisc_open(tty, tty->ldisc));
+                        tty_ldisc_enable(tty);
+                }
                 mutex_unlock(&tty->ldisc_mutex);
                 tty_reset_termios(tty);
         }
@@ -866,6 +868,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
         tty_ldisc_wait_idle(tty);
 
+        mutex_lock(&tty->ldisc_mutex);
         /*
          * Now kill off the ldisc
          */
@@ -876,6 +879,7 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty)
 
         /* Ensure the next open requests the N_TTY ldisc */
         tty_set_termios_ldisc(tty, N_TTY);
+        mutex_unlock(&tty->ldisc_mutex);
 
         /* This will need doing differently if we need to lock */
         if (o_tty)
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 4e862a75f7ff..9769b1149f76 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -267,7 +267,7 @@ int tty_port_block_til_ready(struct tty_port *port,
         if (retval == 0)
                 port->flags |= ASYNC_NORMAL_ACTIVE;
         spin_unlock_irqrestore(&port->lock, flags);
-        return 0;
+        return retval;
         
 }
 EXPORT_SYMBOL(tty_port_block_til_ready);
diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c
index d94d25c12aa8..c1791a63d99d 100644
--- a/drivers/char/vc_screen.c
+++ b/drivers/char/vc_screen.c
@@ -495,11 +495,15 @@ void vcs_remove_sysfs(int index)
 
 int __init vcs_init(void)
 {
+        unsigned int i;
+
         if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))
                 panic("unable to get major %d for vcs device", VCS_MAJOR);
         vc_class = class_create(THIS_MODULE, "vc");
 
         device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
         device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+        for (i = 0; i < MIN_NR_CONSOLES; i++)
+                vcs_make_sysfs(i);
         return 0;
 }
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/drivers/char/vr41xx_giu.c
+++ /dev/null
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index d9113b4c76e3..404f4c1ee431 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -89,6 +89,7 @@
 #include <linux/mutex.h>
 #include <linux/vt_kern.h>
 #include <linux/selection.h>
+#include <linux/smp_lock.h>
 #include <linux/tiocl.h>
 #include <linux/kbd_kern.h>
 #include <linux/consolemap.h>
@@ -769,14 +770,12 @@ int vc_allocate(unsigned int currcons)	/* return 0 on success */
             visual_init(vc, currcons, 1);
             if (!*vc->vc_uni_pagedir_loc)
                 con_set_default_unimap(vc);
-            if (!vc->vc_kmalloced)
-                vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
+            vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL);
             if (!vc->vc_screenbuf) {
                 kfree(vc);
                 vc_cons[currcons].d = NULL;
                 return -ENOMEM;
             }
-            vc->vc_kmalloced = 1;
             vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
             vcs_make_sysfs(currcons);
             atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, &param);
@@ -912,10 +911,8 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
         if (new_scr_end > new_origin)
                 scr_memsetw((void *)new_origin, vc->vc_video_erase_char,
                             new_scr_end - new_origin);
-        if (vc->vc_kmalloced)
-                kfree(vc->vc_screenbuf);
+        kfree(vc->vc_screenbuf);
         vc->vc_screenbuf = newscreen;
-        vc->vc_kmalloced = 1;
         vc->vc_screenbuf_size = new_screen_size;
         set_origin(vc);
 
@@ -994,8 +991,7 @@ void vc_deallocate(unsigned int currcons)
                 vc->vc_sw->con_deinit(vc);
                 put_pid(vc->vt_pid);
                 module_put(vc->vc_sw->owner);
-                if (vc->vc_kmalloced)
-                        kfree(vc->vc_screenbuf);
+                kfree(vc->vc_screenbuf);
                 if (currcons >= MIN_NR_CONSOLES)
                         kfree(vc);
                 vc_cons[currcons].d = NULL;
@@ -2880,7 +2876,6 @@ static int __init con_init(void)
                 INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
                 visual_init(vc, currcons, 1);
                 vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
-                vc->vc_kmalloced = 0;
                 vc_init(vc, vc->vc_rows, vc->vc_cols,
                         currcons || !vc->vc_sw->con_save_screen);
         }
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 7539bed0f7e0..95189f288f8c 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -25,6 +25,7 @@
 #include <linux/console.h>
 #include <linux/consolemap.h>
 #include <linux/signal.h>
+#include <linux/smp_lock.h>
 #include <linux/timex.h>
 
 #include <asm/io.h>
diff --git a/drivers/connector/cn_queue.c b/drivers/connector/cn_queue.c
index c769ef269fb5..408c2af25d50 100644
--- a/drivers/connector/cn_queue.c
+++ b/drivers/connector/cn_queue.c
@@ -1,7 +1,7 @@
 /*
  *      cn_queue.c
  *
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index fd336c5a9057..08b2500f21ec 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -1,7 +1,7 @@
 /*
  *      connector.c
  *
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,7 +33,7 @@
 #include <net/sock.h>
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
 
 static u32 cn_idx = CN_IDX_CONNECTOR;
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 070357aaedbc..81e1020fb514 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig DMADEVICES
         bool "DMA Engine support"
-        depends on !HIGHMEM64G && HAS_DMA
+        depends on HAS_DMA
         help
           DMA engines can do asynchronous data transfers without
           involving the host CPU.  Currently, this framework can be
@@ -46,6 +46,14 @@ config DW_DMAC
           Support the Synopsys DesignWare AHB DMA controller.  This
           can be integrated in chips such as the Atmel AT32ap7000.
 
+config AT_HDMAC
+        tristate "Atmel AHB DMA support"
+        depends on ARCH_AT91SAM9RL
+        select DMA_ENGINE
+        help
+          Support the Atmel AHB DMA controller.  This can be integrated in
+          chips such as the Atmel AT91SAM9RL.
+
 config FSL_DMA
         tristate "Freescale Elo and Elo Plus DMA support"
         depends on FSL_SOC
@@ -108,7 +116,7 @@ config NET_DMA
 
 config ASYNC_TX_DMA
         bool "Async_tx: Offload support for the async_tx api"
-        depends on DMA_ENGINE
+        depends on DMA_ENGINE && !HIGHMEM64G
         help
           This allows the async_tx api to take advantage of offload engines for
           memcpy, memset, xor, and raid6 p+q operations.  If your platform has
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a0b6564800c4..40e1e0083571 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
new file mode 100644
index 000000000000..9a1e5fb412ed
--- /dev/null
+++ b/drivers/dma/at_hdmac.c
@@ -0,0 +1,1213 @@
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac             : Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma      : ATmel DMA controller entity related
+ * atc_ / atchan        : ATmel DMA Channel entity related
+ */
+
+#define ATC_DEFAULT_CFG         (ATC_FIFOCFG_HALFFIFO)
+#define ATC_DEFAULT_CTRLA       (0)
+#define ATC_DEFAULT_CTRLB       (ATC_SIF(0)     \
+                                |ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+                 "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+        return list_first_entry(&atchan->active_list,
+                                struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+        return list_first_entry(&atchan->queue,
+                                struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ *       to make initial allocation more convenient. This bit will be cleared
+ *       and control will be given to client at usage time (during
+ *       preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+                                            gfp_t gfp_flags)
+{
+        struct at_desc  *desc = NULL;
+        struct at_dma   *atdma = to_at_dma(chan->device);
+        dma_addr_t phys;
+
+        desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+        if (desc) {
+                memset(desc, 0, sizeof(struct at_desc));
+                dma_async_tx_descriptor_init(&desc->txd, chan);
+                /* txd.flags will be overwritten in prep functions */
+                desc->txd.flags = DMA_CTRL_ACK;
+                desc->txd.tx_submit = atc_tx_submit;
+                desc->txd.phys = phys;
+        }
+
+        return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+        struct at_desc *desc, *_desc;
+        struct at_desc *ret = NULL;
+        unsigned int i = 0;
+        LIST_HEAD(tmp_list);
+
+        spin_lock_bh(&atchan->lock);
+        list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+                i++;
+                if (async_tx_test_ack(&desc->txd)) {
+                        list_del(&desc->desc_node);
+                        ret = desc;
+                        break;
+                }
+                dev_dbg(chan2dev(&atchan->chan_common),
+                                "desc %p not ACKed\n", desc);
+        }
+        spin_unlock_bh(&atchan->lock);
+        dev_vdbg(chan2dev(&atchan->chan_common),
+                "scanned %u descriptors on freelist\n", i);
+
+        /* no more descriptor available in initial pool: create one more */
+        if (!ret) {
+                ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+                if (ret) {
+                        spin_lock_bh(&atchan->lock);
+                        atchan->descs_allocated++;
+                        spin_unlock_bh(&atchan->lock);
+                } else {
+                        dev_err(chan2dev(&atchan->chan_common),
+                                        "not enough descriptors available\n");
+                }
+        }
+
+        return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+        if (desc) {
+                struct at_desc *child;
+
+                spin_lock_bh(&atchan->lock);
+                list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+                        dev_vdbg(chan2dev(&atchan->chan_common),
+                                        "moving child desc %p to freelist\n",
+                                        child);
+                list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+                dev_vdbg(chan2dev(&atchan->chan_common),
+                         "moving desc %p to freelist\n", desc);
+                list_add(&desc->desc_node, &atchan->free_list);
+                spin_unlock_bh(&atchan->lock);
+        }
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+        dma_cookie_t cookie = atchan->chan_common.cookie;
+
+        if (++cookie < 0)
+                cookie = 1;
+
+        atchan->chan_common.cookie = cookie;
+        desc->txd.cookie = cookie;
+
+        return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+        struct at_dma   *atdma = to_at_dma(atchan->chan_common.device);
+
+        /* ASSERT:  channel is idle */
+        if (atc_chan_is_enabled(atchan)) {
+                dev_err(chan2dev(&atchan->chan_common),
+                        "BUG: Attempted to start non-idle channel\n");
+                dev_err(chan2dev(&atchan->chan_common),
+                        "  channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+                        channel_readl(atchan, SADDR),
+                        channel_readl(atchan, DADDR),
+                        channel_readl(atchan, CTRLA),
+                        channel_readl(atchan, CTRLB),
+                        channel_readl(atchan, DSCR));
+
+                /* The tasklet will hopefully advance the queue... */
+                return;
+        }
+
+        vdbg_dump_regs(atchan);
+
+        /* clear any pending interrupt */
+        while (dma_readl(atdma, EBCISR))
+                cpu_relax();
+
+        channel_writel(atchan, SADDR, 0);
+        channel_writel(atchan, DADDR, 0);
+        channel_writel(atchan, CTRLA, 0);
+        channel_writel(atchan, CTRLB, 0);
+        channel_writel(atchan, DSCR, first->txd.phys);
+        dma_writel(atdma, CHER, atchan->mask);
+
+        vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+        dma_async_tx_callback           callback;
+        void                            *param;
+        struct dma_async_tx_descriptor  *txd = &desc->txd;
+
+        dev_vdbg(chan2dev(&atchan->chan_common),
+                "descriptor %u complete\n", txd->cookie);
+
+        atchan->completed_cookie = txd->cookie;
+        callback = txd->callback;
+        param = txd->callback_param;
+
+        /* move children to free_list */
+        list_splice_init(&txd->tx_list, &atchan->free_list);
+        /* move myself to free_list */
+        list_move(&desc->desc_node, &atchan->free_list);
+
+        /* unmap dma addresses */
+        if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+                if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+                        dma_unmap_single(chan2parent(&atchan->chan_common),
+                                        desc->lli.daddr,
+                                        desc->len, DMA_FROM_DEVICE);
+                else
+                        dma_unmap_page(chan2parent(&atchan->chan_common),
+                                        desc->lli.daddr,
+                                        desc->len, DMA_FROM_DEVICE);
+        }
+        if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+                if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+                        dma_unmap_single(chan2parent(&atchan->chan_common),
+                                        desc->lli.saddr,
+                                        desc->len, DMA_TO_DEVICE);
+                else
+                        dma_unmap_page(chan2parent(&atchan->chan_common),
+                                        desc->lli.saddr,
+                                        desc->len, DMA_TO_DEVICE);
+        }
+
+        /*
+         * The API requires that no submissions are done from a
+         * callback, so we don't need to drop the lock here
+         */
+        if (callback)
+                callback(param);
+
+        dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+        struct at_desc *desc, *_desc;
+        LIST_HEAD(list);
+
+        dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+        BUG_ON(atc_chan_is_enabled(atchan));
+
+        /*
+         * Submit queued descriptors ASAP, i.e. before we go through
+         * the completed ones.
+         */
+        if (!list_empty(&atchan->queue))
+                atc_dostart(atchan, atc_first_queued(atchan));
+        /* empty active_list now it is completed */
+        list_splice_init(&atchan->active_list, &list);
+        /* empty queue list by moving descriptors (if any) to active_list */
+        list_splice_init(&atchan->queue, &atchan->active_list);
+
+        list_for_each_entry_safe(desc, _desc, &list, desc_node)
+                atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+        struct at_desc  *desc, *_desc;
+        struct at_desc  *child;
+
+        dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+        list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+                if (!(desc->lli.ctrla & ATC_DONE))
+                        /* This one is currently in progress */
+                        return;
+
+                list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+                        if (!(child->lli.ctrla & ATC_DONE))
+                                /* Currently in progress */
+                                return;
+
+                /*
+                 * No descriptors so far seem to be in progress, i.e.
+                 * this chain must be done.
+                 */
+                atc_chain_complete(atchan, desc);
+        }
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+        dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+        if (list_empty(&atchan->active_list) ||
+            list_is_singular(&atchan->active_list)) {
+                atc_complete_all(atchan);
+        } else {
+                atc_chain_complete(atchan, atc_first_active(atchan));
+                /* advance work */
+                atc_dostart(atchan, atc_first_active(atchan));
+        }
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+        struct at_desc *bad_desc;
+        struct at_desc *child;
+
+        /*
+         * The descriptor currently at the head of the active list is
+         * broked. Since we don't have any way to report errors, we'll
+         * just have to scream loudly and try to carry on.
+         */
+        bad_desc = atc_first_active(atchan);
+        list_del_init(&bad_desc->desc_node);
+
+        /* As we are stopped, take advantage to push queued descriptors
+         * in active_list */
+        list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+        /* Try to restart the controller */
+        if (!list_empty(&atchan->active_list))
+                atc_dostart(atchan, atc_first_active(atchan));
+
+        /*
+         * KERN_CRITICAL may seem harsh, but since this only happens
+         * when someone submits a bad physical address in a
+         * descriptor, we should consider ourselves lucky that the
+         * controller flagged an error instead of scribbling over
+         * random memory locations.
+         */
+        dev_crit(chan2dev(&atchan->chan_common),
+                        "Bad descriptor submitted for DMA!\n");
+        dev_crit(chan2dev(&atchan->chan_common),
+                        "  cookie: %d\n", bad_desc->txd.cookie);
+        atc_dump_lli(atchan, &bad_desc->lli);
+        list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+                atc_dump_lli(atchan, &child->lli);
+
+        /* Pretend the descriptor completed successfully */
+        atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*--  IRQ & Tasklet  ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+        struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+        /* Channel cannot be enabled here */
+        if (atc_chan_is_enabled(atchan)) {
+                dev_err(chan2dev(&atchan->chan_common),
+                        "BUG: channel enabled in tasklet\n");
+                return;
+        }
+
+        spin_lock(&atchan->lock);
+        if (test_and_clear_bit(0, &atchan->error_status))
+                atc_handle_error(atchan);
+        else
+                atc_advance_work(atchan);
+
+        spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+        struct at_dma           *atdma = (struct at_dma *)dev_id;
+        struct at_dma_chan      *atchan;
+        int                     i;
+        u32                     status, pending, imr;
+        int                     ret = IRQ_NONE;
+
+        do {
+                imr = dma_readl(atdma, EBCIMR);
+                status = dma_readl(atdma, EBCISR);
+                pending = status & imr;
+
+                if (!pending)
+                        break;
+
+                dev_vdbg(atdma->dma_common.dev,
+                        "interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+                         status, imr, pending);
+
+                for (i = 0; i < atdma->dma_common.chancnt; i++) {
+                        atchan = &atdma->chan[i];
+                        if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+                                if (pending & AT_DMA_ERR(i)) {
+                                        /* Disable channel on AHB error */
+                                        dma_writel(atdma, CHDR, atchan->mask);
+                                        /* Give information to tasklet */
+                                        set_bit(0, &atchan->error_status);
+                                }
+                                tasklet_schedule(&atchan->tasklet);
+                                ret = IRQ_HANDLED;
+                        }
+                }
+
+        } while (pending);
+
+        return ret;
+}
+
+
+/*--  DMA Engine API  --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+        struct at_desc          *desc = txd_to_at_desc(tx);
+        struct at_dma_chan      *atchan = to_at_dma_chan(tx->chan);
+        dma_cookie_t            cookie;
+
+        spin_lock_bh(&atchan->lock);
+        cookie = atc_assign_cookie(atchan, desc);
+
+        if (list_empty(&atchan->active_list)) {
+                dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+                                desc->txd.cookie);
+                atc_dostart(atchan, desc);
+                list_add_tail(&desc->desc_node, &atchan->active_list);
+        } else {
+                dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+                                desc->txd.cookie);
+                list_add_tail(&desc->desc_node, &atchan->queue);
+        }
+
+        spin_unlock_bh(&atchan->lock);
+
+        return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+                size_t len, unsigned long flags)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        struct at_desc          *desc = NULL;
+        struct at_desc          *first = NULL;
+        struct at_desc          *prev = NULL;
+        size_t                  xfer_count;
+        size_t                  offset;
+        unsigned int            src_width;
+        unsigned int            dst_width;
+        u32                     ctrla;
+        u32                     ctrlb;
+
+        dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+                        dest, src, len, flags);
+
+        if (unlikely(!len)) {
+                dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+                return NULL;
+        }
+
+        ctrla =   ATC_DEFAULT_CTRLA;
+        ctrlb =   ATC_DEFAULT_CTRLB
+                | ATC_SRC_ADDR_MODE_INCR
+                | ATC_DST_ADDR_MODE_INCR
+                | ATC_FC_MEM2MEM;
+
+        /*
+         * We can be a lot more clever here, but this should take care
+         * of the most common optimization.
+         */
+        if (!((src | dest  | len) & 3)) {
+                ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+                src_width = dst_width = 2;
+        } else if (!((src | dest | len) & 1)) {
+                ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+                src_width = dst_width = 1;
+        } else {
+                ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+                src_width = dst_width = 0;
+        }
+
+        for (offset = 0; offset < len; offset += xfer_count << src_width) {
+                xfer_count = min_t(size_t, (len - offset) >> src_width,
+                                ATC_BTSIZE_MAX);
+
+                desc = atc_desc_get(atchan);
+                if (!desc)
+                        goto err_desc_get;
+
+                desc->lli.saddr = src + offset;
+                desc->lli.daddr = dest + offset;
+                desc->lli.ctrla = ctrla | xfer_count;
+                desc->lli.ctrlb = ctrlb;
+
+                desc->txd.cookie = 0;
+                async_tx_ack(&desc->txd);
+
+                if (!first) {
+                        first = desc;
+                } else {
+                        /* inform the HW lli about chaining */
+                        prev->lli.dscr = desc->txd.phys;
+                        /* insert the link descriptor to the LD ring */
+                        list_add_tail(&desc->desc_node,
+                                        &first->txd.tx_list);
+                }
+                prev = desc;
+        }
+
+        /* First descriptor of the chain embedds additional information */
+        first->txd.cookie = -EBUSY;
+        first->len = len;
+
+        /* set end-of-link to the last link descriptor of list*/
+        set_desc_eol(desc);
+
+        desc->txd.flags = flags; /* client is in control of this ack */
+
+        return &first->txd;
+
+err_desc_get:
+        atc_desc_put(atchan, first);
+        return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+                unsigned int sg_len, enum dma_data_direction direction,
+                unsigned long flags)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        struct at_dma_slave     *atslave = chan->private;
+        struct at_desc          *first = NULL;
+        struct at_desc          *prev = NULL;
+        u32                     ctrla;
+        u32                     ctrlb;
+        dma_addr_t              reg;
+        unsigned int            reg_width;
+        unsigned int            mem_width;
+        unsigned int            i;
+        struct scatterlist      *sg;
+        size_t                  total_len = 0;
+
+        dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+                        direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+                        flags);
+
+        if (unlikely(!atslave || !sg_len)) {
+                dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+                return NULL;
+        }
+
+        reg_width = atslave->reg_width;
+
+        sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+        ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+        ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+        switch (direction) {
+        case DMA_TO_DEVICE:
+                ctrla |=  ATC_DST_WIDTH(reg_width);
+                ctrlb |=  ATC_DST_ADDR_MODE_FIXED
+                        | ATC_SRC_ADDR_MODE_INCR
+                        | ATC_FC_MEM2PER;
+                reg = atslave->tx_reg;
+                for_each_sg(sgl, sg, sg_len, i) {
+                        struct at_desc  *desc;
+                        u32             len;
+                        u32             mem;
+
+                        desc = atc_desc_get(atchan);
+                        if (!desc)
+                                goto err_desc_get;
+
+                        mem = sg_phys(sg);
+                        len = sg_dma_len(sg);
+                        mem_width = 2;
+                        if (unlikely(mem & 3 || len & 3))
+                                mem_width = 0;
+
+                        desc->lli.saddr = mem;
+                        desc->lli.daddr = reg;
+                        desc->lli.ctrla = ctrla
+                                        | ATC_SRC_WIDTH(mem_width)
+                                        | len >> mem_width;
+                        desc->lli.ctrlb = ctrlb;
+
+                        if (!first) {
+                                first = desc;
+                        } else {
+                                /* inform the HW lli about chaining */
+                                prev->lli.dscr = desc->txd.phys;
+                                /* insert the link descriptor to the LD ring */
+                                list_add_tail(&desc->desc_node,
+                                                &first->txd.tx_list);
+                        }
+                        prev = desc;
+                        total_len += len;
+                }
+                break;
+        case DMA_FROM_DEVICE:
+                ctrla |=  ATC_SRC_WIDTH(reg_width);
+                ctrlb |=  ATC_DST_ADDR_MODE_INCR
+                        | ATC_SRC_ADDR_MODE_FIXED
+                        | ATC_FC_PER2MEM;
+
+                reg = atslave->rx_reg;
+                for_each_sg(sgl, sg, sg_len, i) {
+                        struct at_desc  *desc;
+                        u32             len;
+                        u32             mem;
+
+                        desc = atc_desc_get(atchan);
+                        if (!desc)
+                                goto err_desc_get;
+
+                        mem = sg_phys(sg);
+                        len = sg_dma_len(sg);
+                        mem_width = 2;
+                        if (unlikely(mem & 3 || len & 3))
+                                mem_width = 0;
+
+                        desc->lli.saddr = reg;
+                        desc->lli.daddr = mem;
+                        desc->lli.ctrla = ctrla
+                                        | ATC_DST_WIDTH(mem_width)
+                                        | len >> mem_width;
+                        desc->lli.ctrlb = ctrlb;
+
+                        if (!first) {
+                                first = desc;
+                        } else {
+                                /* inform the HW lli about chaining */
+                                prev->lli.dscr = desc->txd.phys;
+                                /* insert the link descriptor to the LD ring */
+                                list_add_tail(&desc->desc_node,
+                                                &first->txd.tx_list);
+                        }
+                        prev = desc;
+                        total_len += len;
+                }
+                break;
+        default:
+                return NULL;
+        }
+
+        /* set end-of-link to the last link descriptor of list*/
+        set_desc_eol(prev);
+
+        /* First descriptor of the chain embedds additional information */
+        first->txd.cookie = -EBUSY;
+        first->len = total_len;
+
+        /* last link descriptor of list is responsible of flags */
+        prev->txd.flags = flags; /* client is in control of this ack */
+
+        return &first->txd;
+
+err_desc_get:
+        dev_err(chan2dev(chan), "not enough descriptors available\n");
+        atc_desc_put(atchan, first);
+        return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        struct at_dma           *atdma = to_at_dma(chan->device);
+        struct at_desc          *desc, *_desc;
+        LIST_HEAD(list);
+
+        /*
+         * This is only called when something went wrong elsewhere, so
+         * we don't really care about the data. Just disable the
+         * channel. We still have to poll the channel enable bit due
+         * to AHB/HSB limitations.
+         */
+        spin_lock_bh(&atchan->lock);
+
+        dma_writel(atdma, CHDR, atchan->mask);
+
+        /* confirm that this channel is disabled */
+        while (dma_readl(atdma, CHSR) & atchan->mask)
+                cpu_relax();
+
+        /* active_list entries will end up before queued entries */
+        list_splice_init(&atchan->queue, &list);
+        list_splice_init(&atchan->active_list, &list);
+
+        spin_unlock_bh(&atchan->lock);
+
+        /* Flush all pending and queued descriptors */
+        list_for_each_entry_safe(desc, _desc, &list, desc_node)
+                atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+                dma_cookie_t cookie,
+                dma_cookie_t *done, dma_cookie_t *used)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        dma_cookie_t            last_used;
+        dma_cookie_t            last_complete;
+        enum dma_status         ret;
+
+        dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+                        cookie, done ? *done : 0, used ? *used : 0);
+
+        spin_lock_bh(atchan->lock);
+
+        last_complete = atchan->completed_cookie;
+        last_used = chan->cookie;
+
+        ret = dma_async_is_complete(cookie, last_complete, last_used);
+        if (ret != DMA_SUCCESS) {
+                atc_cleanup_descriptors(atchan);
+
+                last_complete = atchan->completed_cookie;
+                last_used = chan->cookie;
+
+                ret = dma_async_is_complete(cookie, last_complete, last_used);
+        }
+
+        spin_unlock_bh(atchan->lock);
+
+        if (done)
+                *done = last_complete;
+        if (used)
+                *used = last_used;
+
+        return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+
+        dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+        if (!atc_chan_is_enabled(atchan)) {
+                spin_lock_bh(&atchan->lock);
+                atc_advance_work(atchan);
+                spin_unlock_bh(&atchan->lock);
+        }
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        struct at_dma           *atdma = to_at_dma(chan->device);
+        struct at_desc          *desc;
+        struct at_dma_slave     *atslave;
+        int                     i;
+        u32                     cfg;
+        LIST_HEAD(tmp_list);
+
+        dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+        /* ASSERT:  channel is idle */
+        if (atc_chan_is_enabled(atchan)) {
+                dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+                return -EIO;
+        }
+
+        cfg = ATC_DEFAULT_CFG;
+
+        atslave = chan->private;
+        if (atslave) {
+                /*
+                 * We need controller-specific data to set up slave
+                 * transfers.
+                 */
+                BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+                /* if cfg configuration specified take it instad of default */
+                if (atslave->cfg)
+                        cfg = atslave->cfg;
+        }
+
+        /* have we already been set up?
+         * reconfigure channel but no need to reallocate descriptors */
+        if (!list_empty(&atchan->free_list))
+                return atchan->descs_allocated;
+
+        /* Allocate initial pool of descriptors */
+        for (i = 0; i < init_nr_desc_per_channel; i++) {
+                desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+                if (!desc) {
+                        dev_err(atdma->dma_common.dev,
+                                "Only %d initial descriptors\n", i);
+                        break;
+                }
+                list_add_tail(&desc->desc_node, &tmp_list);
+        }
+
+        spin_lock_bh(&atchan->lock);
+        atchan->descs_allocated = i;
+        list_splice(&tmp_list, &atchan->free_list);
+        atchan->completed_cookie = chan->cookie = 1;
+        spin_unlock_bh(&atchan->lock);
+
+        /* channel parameters */
+        channel_writel(atchan, CFG, cfg);
+
+        dev_dbg(chan2dev(chan),
+                "alloc_chan_resources: allocated %d descriptors\n",
+                atchan->descs_allocated);
+
+        return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+        struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+        struct at_dma           *atdma = to_at_dma(chan->device);
+        struct at_desc          *desc, *_desc;
+        LIST_HEAD(list);
+
+        dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+                atchan->descs_allocated);
+
+        /* ASSERT:  channel is idle */
+        BUG_ON(!list_empty(&atchan->active_list));
+        BUG_ON(!list_empty(&atchan->queue));
+        BUG_ON(atc_chan_is_enabled(atchan));
+
+        list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+                dev_vdbg(chan2dev(chan), "  freeing descriptor %p\n", desc);
+                list_del(&desc->desc_node);
+                /* free link descriptor */
+                dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+        }
+        list_splice_init(&atchan->free_list, &list);
+        atchan->descs_allocated = 0;
+
+        dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*--  Module Management  -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+        dma_writel(atdma, EN, 0);
+
+        /* disable all interrupts */
+        dma_writel(atdma, EBCIDR, -1L);
+
+        /* confirm that all channels are disabled */
+        while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+                cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+        struct at_dma_platform_data *pdata;
+        struct resource         *io;
+        struct at_dma           *atdma;
+        size_t                  size;
+        int                     irq;
+        int                     err;
+        int                     i;
+
+        /* get DMA Controller parameters from platform */
+        pdata = pdev->dev.platform_data;
+        if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+                return -EINVAL;
+
+        io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (!io)
+                return -EINVAL;
+
+        irq = platform_get_irq(pdev, 0);
+        if (irq < 0)
+                return irq;
+
+        size = sizeof(struct at_dma);
+        size += pdata->nr_channels * sizeof(struct at_dma_chan);
+        atdma = kzalloc(size, GFP_KERNEL);
+        if (!atdma)
+                return -ENOMEM;
+
+        /* discover transaction capabilites from the platform data */
+        atdma->dma_common.cap_mask = pdata->cap_mask;
+        atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+        size = io->end - io->start + 1;
+        if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+                err = -EBUSY;
+                goto err_kfree;
+        }
+
+        atdma->regs = ioremap(io->start, size);
+        if (!atdma->regs) {
+                err = -ENOMEM;
+                goto err_release_r;
+        }
+
+        atdma->clk = clk_get(&pdev->dev, "dma_clk");
+        if (IS_ERR(atdma->clk)) {
+                err = PTR_ERR(atdma->clk);
+                goto err_clk;
+        }
+        clk_enable(atdma->clk);
+
+        /* force dma off, just in case */
+        at_dma_off(atdma);
+
+        err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+        if (err)
+                goto err_irq;
+
+        platform_set_drvdata(pdev, atdma);
+
+        /* create a pool of consistent memory blocks for hardware descriptors */
+        atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+                        &pdev->dev, sizeof(struct at_desc),
+                        4 /* word alignment */, 0);
+        if (!atdma->dma_desc_pool) {
+                dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+                err = -ENOMEM;
+                goto err_pool_create;
+        }
+
+        /* clear any pending interrupt */
+        while (dma_readl(atdma, EBCISR))
+                cpu_relax();
+
+        /* initialize channels related values */
+        INIT_LIST_HEAD(&atdma->dma_common.channels);
+        for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+                struct at_dma_chan      *atchan = &atdma->chan[i];
+
+                atchan->chan_common.device = &atdma->dma_common;
+                atchan->chan_common.cookie = atchan->completed_cookie = 1;
+                atchan->chan_common.chan_id = i;
+                list_add_tail(&atchan->chan_common.device_node,
+                                &atdma->dma_common.channels);
+
+                atchan->ch_regs = atdma->regs + ch_regs(i);
+                spin_lock_init(&atchan->lock);
+                atchan->mask = 1 << i;
+
+                INIT_LIST_HEAD(&atchan->active_list);
+                INIT_LIST_HEAD(&atchan->queue);
+                INIT_LIST_HEAD(&atchan->free_list);
+
+                tasklet_init(&atchan->tasklet, atc_tasklet,
+                                (unsigned long)atchan);
+                atc_enable_irq(atchan);
+        }
+
+        /* set base routines */
+        atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+        atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+        atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+        atdma->dma_common.device_issue_pending = atc_issue_pending;
+        atdma->dma_common.dev = &pdev->dev;
+
+        /* set prep routines based on capability */
+        if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+                atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+        if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+                atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+                atdma->dma_common.device_terminate_all = atc_terminate_all;
+        }
+
+        dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+        dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+          dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+          dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)  ? "slave " : "",
+          atdma->dma_common.chancnt);
+
+        dma_async_device_register(&atdma->dma_common);
+
+        return 0;
+
+err_pool_create:
+        platform_set_drvdata(pdev, NULL);
+        free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+        clk_disable(atdma->clk);
+        clk_put(atdma->clk);
+err_clk:
+        iounmap(atdma->regs);
+        atdma->regs = NULL;
+err_release_r:
+        release_mem_region(io->start, size);
+err_kfree:
+        kfree(atdma);
+        return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+        struct at_dma           *atdma = platform_get_drvdata(pdev);
+        struct dma_chan         *chan, *_chan;
+        struct resource         *io;
+
+        at_dma_off(atdma);
+        dma_async_device_unregister(&atdma->dma_common);
+
+        dma_pool_destroy(atdma->dma_desc_pool);
+        platform_set_drvdata(pdev, NULL);
+        free_irq(platform_get_irq(pdev, 0), atdma);
+
+        list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+                        device_node) {
+                struct at_dma_chan      *atchan = to_at_dma_chan(chan);
+
+                /* Disable interrupts */
+                atc_disable_irq(atchan);
+                tasklet_disable(&atchan->tasklet);
+
+                tasklet_kill(&atchan->tasklet);
+                list_del(&chan->device_node);
+        }
+
+        clk_disable(atdma->clk);
+        clk_put(atdma->clk);
+
+        iounmap(atdma->regs);
+        atdma->regs = NULL;
+
+        io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        release_mem_region(io->start, io->end - io->start + 1);
+
+        kfree(atdma);
+
+        return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+        struct at_dma   *atdma = platform_get_drvdata(pdev);
+
+        at_dma_off(platform_get_drvdata(pdev));
+        clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+        struct at_dma   *atdma = platform_get_drvdata(pdev);
+
+        at_dma_off(platform_get_drvdata(pdev));
+        clk_disable(atdma->clk);
+        return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+        struct at_dma   *atdma = platform_get_drvdata(pdev);
+
+        clk_enable(atdma->clk);
+        dma_writel(atdma, EN, AT_DMA_ENABLE);
+        return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+        .remove         = __exit_p(at_dma_remove),
+        .shutdown       = at_dma_shutdown,
+        .suspend_late   = at_dma_suspend_late,
+        .resume_early   = at_dma_resume_early,
+        .driver = {
+                .name   = "at_hdmac",
+        },
+};
+
+static int __init at_dma_init(void)
+{
+        return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+        platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
new file mode 100644
index 000000000000..4c972afc49ec
--- /dev/null
+++ b/drivers/dma/at_hdmac_regs.h
@@ -0,0 +1,353 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define AT_DMA_MAX_NR_CHANNELS  8
+
+
+#define AT_DMA_GCFG     0x00    /* Global Configuration Register */
+#define         AT_DMA_IF_BIGEND(i)     (0x1 << (i))    /* AHB-Lite Interface i in Big-endian mode */
+#define         AT_DMA_ARB_CFG  (0x1 << 4)      /* Arbiter mode. */
+#define                 AT_DMA_ARB_CFG_FIXED            (0x0 << 4)
+#define                 AT_DMA_ARB_CFG_ROUND_ROBIN      (0x1 << 4)
+
+#define AT_DMA_EN       0x04    /* Controller Enable Register */
+#define         AT_DMA_ENABLE   (0x1 << 0)
+
+#define AT_DMA_SREQ     0x08    /* Software Single Request Register */
+#define         AT_DMA_SSREQ(x) (0x1 << ((x) << 1))             /* Request a source single transfer on channel x */
+#define         AT_DMA_DSREQ(x) (0x1 << (1 + ((x) << 1)))       /* Request a destination single transfer on channel x */
+
+#define AT_DMA_CREQ     0x0C    /* Software Chunk Transfer Request Register */
+#define         AT_DMA_SCREQ(x) (0x1 << ((x) << 1))             /* Request a source chunk transfer on channel x */
+#define         AT_DMA_DCREQ(x) (0x1 << (1 + ((x) << 1)))       /* Request a destination chunk transfer on channel x */
+
+#define AT_DMA_LAST     0x10    /* Software Last Transfer Flag Register */
+#define         AT_DMA_SLAST(x) (0x1 << ((x) << 1))             /* This src rq is last tx of buffer on channel x */
+#define         AT_DMA_DLAST(x) (0x1 << (1 + ((x) << 1)))       /* This dst rq is last tx of buffer on channel x */
+
+#define AT_DMA_SYNC     0x14    /* Request Synchronization Register */
+#define         AT_DMA_SYR(h)   (0x1 << (h))                    /* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define AT_DMA_EBCIER   0x18    /* Enable register */
+#define AT_DMA_EBCIDR   0x1C    /* Disable register */
+#define AT_DMA_EBCIMR   0x20    /* Mask Register */
+#define AT_DMA_EBCISR   0x24    /* Status Register */
+#define         AT_DMA_CBTC_OFFSET      8
+#define         AT_DMA_ERR_OFFSET       16
+#define         AT_DMA_BTC(x)   (0x1 << (x))
+#define         AT_DMA_CBTC(x)  (0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define         AT_DMA_ERR(x)   (0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define AT_DMA_CHER     0x28    /* Channel Handler Enable Register */
+#define         AT_DMA_ENA(x)   (0x1 << (x))
+#define         AT_DMA_SUSP(x)  (0x1 << ( 8 + (x)))
+#define         AT_DMA_KEEP(x)  (0x1 << (24 + (x)))
+
+#define AT_DMA_CHDR     0x2C    /* Channel Handler Disable Register */
+#define         AT_DMA_DIS(x)   (0x1 << (x))
+#define         AT_DMA_RES(x)   (0x1 << ( 8 + (x)))
+
+#define AT_DMA_CHSR     0x30    /* Channel Handler Status Register */
+#define         AT_DMA_EMPT(x)  (0x1 << (16 + (x)))
+#define         AT_DMA_STAL(x)  (0x1 << (24 + (x)))
+
+
+#define AT_DMA_CH_REGS_BASE     0x3C    /* Channel registers base address */
+#define ch_regs(x)      (AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define ATC_SADDR_OFFSET        0x00    /* Source Address Register */
+#define ATC_DADDR_OFFSET        0x04    /* Destination Address Register */
+#define ATC_DSCR_OFFSET         0x08    /* Descriptor Address Register */
+#define ATC_CTRLA_OFFSET        0x0C    /* Control A Register */
+#define ATC_CTRLB_OFFSET        0x10    /* Control B Register */
+#define ATC_CFG_OFFSET          0x14    /* Configuration Register */
+#define ATC_SPIP_OFFSET         0x18    /* Src PIP Configuration Register */
+#define ATC_DPIP_OFFSET         0x1C    /* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define ATC_DSCR_IF(i)          (0x3 & (i))     /* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define ATC_BTSIZE_MAX          0xFFFFUL        /* Maximum Buffer Transfer Size */
+#define ATC_BTSIZE(x)           (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SRC_WIDTH_MASK      (0x3 << 24)     /* Source Single Transfer Size */
+#define         ATC_SRC_WIDTH(x)        ((x) << 24)
+#define         ATC_SRC_WIDTH_BYTE      (0x0 << 24)
+#define         ATC_SRC_WIDTH_HALFWORD  (0x1 << 24)
+#define         ATC_SRC_WIDTH_WORD      (0x2 << 24)
+#define ATC_DST_WIDTH_MASK      (0x3 << 28)     /* Destination Single Transfer Size */
+#define         ATC_DST_WIDTH(x)        ((x) << 28)
+#define         ATC_DST_WIDTH_BYTE      (0x0 << 28)
+#define         ATC_DST_WIDTH_HALFWORD  (0x1 << 28)
+#define         ATC_DST_WIDTH_WORD      (0x2 << 28)
+#define ATC_DONE                (0x1 << 31)     /* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define ATC_SIF(i)              (0x3 & (i))     /* Src tx done via AHB-Lite Interface i */
+#define ATC_DIF(i)              ((0x3 & (i)) <<  4)     /* Dst tx done via AHB-Lite Interface i */
+#define ATC_SRC_PIP             (0x1 <<  8)     /* Source Picture-in-Picture enabled */
+#define ATC_DST_PIP             (0x1 << 12)     /* Destination Picture-in-Picture enabled */
+#define ATC_SRC_DSCR_DIS        (0x1 << 16)     /* Src Descriptor fetch disable */
+#define ATC_DST_DSCR_DIS        (0x1 << 20)     /* Dst Descriptor fetch disable */
+#define ATC_FC_MASK             (0x7 << 21)     /* Choose Flow Controller */
+#define         ATC_FC_MEM2MEM          (0x0 << 21)     /* Mem-to-Mem (DMA) */
+#define         ATC_FC_MEM2PER          (0x1 << 21)     /* Mem-to-Periph (DMA) */
+#define         ATC_FC_PER2MEM          (0x2 << 21)     /* Periph-to-Mem (DMA) */
+#define         ATC_FC_PER2PER          (0x3 << 21)     /* Periph-to-Periph (DMA) */
+#define         ATC_FC_PER2MEM_PER      (0x4 << 21)     /* Periph-to-Mem (Peripheral) */
+#define         ATC_FC_MEM2PER_PER      (0x5 << 21)     /* Mem-to-Periph (Peripheral) */
+#define         ATC_FC_PER2PER_SRCPER   (0x6 << 21)     /* Periph-to-Periph (Src Peripheral) */
+#define         ATC_FC_PER2PER_DSTPER   (0x7 << 21)     /* Periph-to-Periph (Dst Peripheral) */
+#define ATC_SRC_ADDR_MODE_MASK  (0x3 << 24)
+#define         ATC_SRC_ADDR_MODE_INCR  (0x0 << 24)     /* Incrementing Mode */
+#define         ATC_SRC_ADDR_MODE_DECR  (0x1 << 24)     /* Decrementing Mode */
+#define         ATC_SRC_ADDR_MODE_FIXED (0x2 << 24)     /* Fixed Mode */
+#define ATC_DST_ADDR_MODE_MASK  (0x3 << 28)
+#define         ATC_DST_ADDR_MODE_INCR  (0x0 << 28)     /* Incrementing Mode */
+#define         ATC_DST_ADDR_MODE_DECR  (0x1 << 28)     /* Decrementing Mode */
+#define         ATC_DST_ADDR_MODE_FIXED (0x2 << 28)     /* Fixed Mode */
+#define ATC_IEN                 (0x1 << 30)     /* BTC interrupt enable (active low) */
+#define ATC_AUTO                (0x1 << 31)     /* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define ATC_SPIP_HOLE(x)        (0xFFFFU & (x))
+#define ATC_SPIP_BOUNDARY(x)    ((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define ATC_DPIP_HOLE(x)        (0xFFFFU & (x))
+#define ATC_DPIP_BOUNDARY(x)    ((0x3FF & (x)) << 16)
+
+
+/*--  descriptors  -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+        /* values that are not changed by hardware */
+        dma_addr_t      saddr;
+        dma_addr_t      daddr;
+        /* value that may get written back: */
+        u32             ctrla;
+        /* more values that are not changed by hardware */
+        u32             ctrlb;
+        dma_addr_t      dscr;   /* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+        /* FIRST values the hardware uses */
+        struct at_lli                   lli;
+
+        /* THEN values for driver housekeeping */
+        struct dma_async_tx_descriptor  txd;
+        struct list_head                desc_node;
+        size_t                          len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+        return container_of(txd, struct at_desc, txd);
+}
+
+
+/*--  Channels  --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ *                to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+        struct dma_chan         chan_common;
+        struct at_dma           *device;
+        void __iomem            *ch_regs;
+        u8                      mask;
+        unsigned long           error_status;
+        struct tasklet_struct   tasklet;
+
+        spinlock_t              lock;
+
+        /* these other elements are all protected by lock */
+        dma_cookie_t            completed_cookie;
+        struct list_head        active_list;
+        struct list_head        queue;
+        struct list_head        free_list;
+        unsigned int            descs_allocated;
+};
+
+#define channel_readl(atchan, name) \
+        __raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define channel_writel(atchan, name, val) \
+        __raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+        return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*--  Controller  ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+        struct dma_device       dma_common;
+        void __iomem            *regs;
+        struct clk              *clk;
+
+        u8                      all_chan_mask;
+
+        struct dma_pool         *dma_desc_pool;
+        /* AT THE END channels table */
+        struct at_dma_chan      chan[0];
+};
+
+#define dma_readl(atdma, name) \
+        __raw_readl((atdma)->regs + AT_DMA_##name)
+#define dma_writel(atdma, name, val) \
+        __raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+        return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*--  Helper functions  ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+        return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+        return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+        struct at_dma   *atdma = to_at_dma(atchan->chan_common.device);
+
+        dev_err(chan2dev(&atchan->chan_common),
+                "  channel %d : imr = 0x%x, chsr = 0x%x\n",
+                atchan->chan_common.chan_id,
+                dma_readl(atdma, EBCIMR),
+                dma_readl(atdma, CHSR));
+
+        dev_err(chan2dev(&atchan->chan_common),
+                "  channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+                channel_readl(atchan, SADDR),
+                channel_readl(atchan, DADDR),
+                channel_readl(atchan, CTRLA),
+                channel_readl(atchan, CTRLB),
+                channel_readl(atchan, CFG),
+                channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+        dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+                        "  desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+                        lli->saddr, lli->daddr,
+                        lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+        struct at_dma   *atdma = to_at_dma(atchan->chan_common.device);
+        u32             ebci;
+
+        /* enable interrupts on buffer chain completion & error */
+        ebci =    AT_DMA_CBTC(atchan->chan_common.chan_id)
+                | AT_DMA_ERR(atchan->chan_common.chan_id);
+        if (on)
+                dma_writel(atdma, EBCIER, ebci);
+        else
+                dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+        atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+        atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+        struct at_dma   *atdma = to_at_dma(atchan->chan_common.device);
+
+        return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+        desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+        desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index fb7da5141e96..d93017fc7872 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
 MODULE_PARM_DESC(max_channels,
                 "Maximum number of channels to use (default: all)");
 
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+                "Iterations before stopping test (default: infinite)");
+
 static unsigned int xor_sources = 3;
 module_param(xor_sources, uint, S_IRUGO);
 MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
                         buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
                 for ( ; i < start + len; i++)
                         buf[i] = PATTERN_SRC | PATTERN_COPY
-                                | (~i & PATTERN_COUNT_MASK);;
+                                | (~i & PATTERN_COUNT_MASK);
                 for ( ; i < test_buf_size; i++)
                         buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
                 buf++;
@@ -270,7 +275,8 @@ static int dmatest_func(void *data)
 
         flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
 
-        while (!kthread_should_stop()) {
+        while (!kthread_should_stop()
+               && !(iterations && total_tests >= iterations)) {
                 struct dma_device *dev = chan->device;
                 struct dma_async_tx_descriptor *tx = NULL;
                 dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@ err_srcbuf:
 err_srcs:
         pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
                         thread_name, total_tests, failed_tests, ret);
+
+        if (iterations > 0)
+                while (!kthread_should_stop()) {
+                        DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+                        interruptible_sleep_on(&wait_dmatest_exit);
+                }
+
         return ret;
 }
 
@@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
 
         if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
                 cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
-                thread_count += cnt > 0 ?: 0;
+                thread_count += cnt > 0 ? cnt : 0;
         }
         if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
                 cnt = dmatest_add_threads(dtc, DMA_XOR);
-                thread_count += cnt > 0 ?: 0;
+                thread_count += cnt > 0 ? cnt : 0;
         }
 
         pr_info("dmatest: Started %u threads using %s\n",
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index f18d1bde0439..ef87a8984145 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -12,6 +12,11 @@
  *   also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
  *   The support for MPC8349 DMA contorller is also added.
  *
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
  * This is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
         case FSL_DMA_IP_83XX:
                 /* Set the channel to below modes:
                  * EOTIE - End-of-transfer interrupt enable
+                 * PRC_RM - PCI read multiple
                  */
-                DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
-                                32);
+                DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+                                | FSL_DMA_MR_PRC_RM, 32);
                 break;
         }
 
@@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
 
 static void dma_start(struct fsl_dma_chan *fsl_chan)
 {
-        u32 mr_set = 0;;
+        u32 mr_set = 0;
 
         if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
                 DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
                 mr_set |= FSL_DMA_MR_EMP_EN;
-        } else
+        } else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
                 DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
                         DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
                                 & ~FSL_DMA_MR_EMP_EN, 32);
+        }
 
         if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
                 mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 
         switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
         case FSL_DMA_IP_85XX:
-                new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
                 new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
         case FSL_DMA_IP_83XX:
+                new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
                 new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
                 new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
         }
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 4f21a512d848..dc7f26865797 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -38,6 +38,7 @@
 
 /* Special MR definition for MPC8349 */
 #define FSL_DMA_MR_EOTIE        0x00000080
+#define FSL_DMA_MR_PRC_RM       0x00000800
 
 #define FSL_DMA_SR_CH           0x00000020
 #define FSL_DMA_SR_PE           0x00000010
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ddab94f51224..3f23eabe09f2 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
         if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
                 dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
         if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
-                dma_dev->max_xor = 8;                  ;
+                dma_dev->max_xor = 8;
                 dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
         }
 
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 858fe6037223..24964c1d0af9 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -970,7 +970,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
         }
 
         for (cs = 0; cs < pvt->num_dcsm; cs++) {
-                reg = K8_DCSB0 + (cs * 4);
+                reg = K8_DCSM0 + (cs * 4);
                 err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
                                         &pvt->dcsm0[cs]);
                 if (unlikely(err))
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
index 2406c2ce2844..d4ec60593176 100644
--- a/drivers/edac/x38_edac.c
+++ b/drivers/edac/x38_edac.c
@@ -30,7 +30,7 @@
 /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
 
 #define X38_MCHBAR_LOW  0x48    /* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH 0x4b
+#define X38_MCHBAR_HIGH 0x4c
 #define X38_MCHBAR_MASK 0xfffffc000ULL  /* bits 35:14 */
 #define X38_MMR_WINDOW_SIZE     16384
 
diff --git a/drivers/gpio/vr41xx_giu.c b/drivers/gpio/vr41xx_giu.c
index b70e06133e78..b16c9a8c03f5 100644
--- a/drivers/gpio/vr41xx_giu.c
+++ b/drivers/gpio/vr41xx_giu.c
@@ -29,7 +29,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
diff --git a/drivers/gpu/drm/drm_debugfs.c b/drivers/gpu/drm/drm_debugfs.c
index 2960b6d73456..9903f270e440 100644
--- a/drivers/gpu/drm/drm_debugfs.c
+++ b/drivers/gpu/drm/drm_debugfs.c
@@ -101,6 +101,10 @@ int drm_debugfs_create_files(struct drm_info_list *files, int count,
                         continue;
 
                 tmp = kmalloc(sizeof(struct drm_info_node), GFP_KERNEL);
+                if (tmp == NULL) {
+                        ret = -1;
+                        goto fail;
+                }
                 ent = debugfs_create_file(files[i].name, S_IFREG | S_IRUGO,
                                           root, tmp, &drm_debugfs_fops);
                 if (!ent) {
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 8104ecaea26f..ffe8f4394d50 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -134,26 +134,29 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size)
         BUG_ON((size & (PAGE_SIZE - 1)) != 0);
 
         obj = kzalloc(sizeof(*obj), GFP_KERNEL);
+        if (!obj)
+                goto free;
 
         obj->dev = dev;
         obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
-        if (IS_ERR(obj->filp)) {
-                kfree(obj);
-                return NULL;
-        }
+        if (IS_ERR(obj->filp))
+                goto free;
 
         kref_init(&obj->refcount);
         kref_init(&obj->handlecount);
         obj->size = size;
         if (dev->driver->gem_init_object != NULL &&
             dev->driver->gem_init_object(obj) != 0) {
-                fput(obj->filp);
-                kfree(obj);
-                return NULL;
+                goto fput;
         }
         atomic_inc(&dev->object_count);
         atomic_add(obj->size, &dev->object_memory);
         return obj;
+fput:
+        fput(obj->filp);
+free:
+        kfree(obj);
+        return NULL;
 }
 EXPORT_SYMBOL(drm_gem_object_alloc);
 
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 155a5bbce680..55bb8a82d612 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -489,7 +489,7 @@ int drm_put_minor(struct drm_minor **minor_p)
  */
 void drm_put_dev(struct drm_device *dev)
 {
-        struct drm_driver *driver = dev->driver;
+        struct drm_driver *driver;
         struct drm_map_list *r_list, *list_temp;
 
         DRM_DEBUG("\n");
@@ -498,6 +498,7 @@ void drm_put_dev(struct drm_device *dev)
                 DRM_ERROR("cleanup called no dev\n");
                 return;
         }
+        driver = dev->driver;
 
         drm_vblank_cleanup(dev);
 
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 5fae1e074b4b..013d38059943 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -13,7 +13,8 @@ radeon-$(CONFIG_DRM_RADEON_KMS) += radeon_device.o radeon_kms.o \
         radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
         radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
         radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
-        rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
+        rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \
+        radeon_test.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c0080cc9bf8d..74d034f77c6b 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -31,6 +31,132 @@
 #include "atom.h"
 #include "atom-bits.h"
 
+static void atombios_overscan_setup(struct drm_crtc *crtc,
+                                    struct drm_display_mode *mode,
+                                    struct drm_display_mode *adjusted_mode)
+{
+        struct drm_device *dev = crtc->dev;
+        struct radeon_device *rdev = dev->dev_private;
+        struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+        int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+        int a1, a2;
+
+        memset(&args, 0, sizeof(args));
+
+        args.usOverscanRight = 0;
+        args.usOverscanLeft = 0;
+        args.usOverscanBottom = 0;
+        args.usOverscanTop = 0;
+        args.ucCRTC = radeon_crtc->crtc_id;
+
+        switch (radeon_crtc->rmx_type) {
+        case RMX_CENTER:
+                args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+                args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+                args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+                args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+                atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+                break;
+        case RMX_ASPECT:
+                a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+                a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+                if (a1 > a2) {
+                        args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+                        args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+                } else if (a2 > a1) {
+                        args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+                        args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+                }
+                atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+                break;
+        case RMX_FULL:
+        default:
+                args.usOverscanRight = 0;
+                args.usOverscanLeft = 0;
+                args.usOverscanBottom = 0;
+                args.usOverscanTop = 0;
+                atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+                break;
+        }
+}
+
+static void atombios_scaler_setup(struct drm_crtc *crtc)
+{
+        struct drm_device *dev = crtc->dev;
+        struct radeon_device *rdev = dev->dev_private;
+        struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        ENABLE_SCALER_PS_ALLOCATION args;
+        int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+        /* fixme - fill in enc_priv for atom dac */
+        enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+        if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+                return;
+
+        memset(&args, 0, sizeof(args));
+
+        args.ucScaler = radeon_crtc->crtc_id;
+
+        if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+                switch (tv_std) {
+                case TV_STD_NTSC:
+                default:
+                        args.ucTVStandard = ATOM_TV_NTSC;
+                        break;
+                case TV_STD_PAL:
+                        args.ucTVStandard = ATOM_TV_PAL;
+                        break;
+                case TV_STD_PAL_M:
+                        args.ucTVStandard = ATOM_TV_PALM;
+                        break;
+                case TV_STD_PAL_60:
+                        args.ucTVStandard = ATOM_TV_PAL60;
+                        break;
+                case TV_STD_NTSC_J:
+                        args.ucTVStandard = ATOM_TV_NTSCJ;
+                        break;
+                case TV_STD_SCART_PAL:
+                        args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+                        break;
+                case TV_STD_SECAM:
+                        args.ucTVStandard = ATOM_TV_SECAM;
+                        break;
+                case TV_STD_PAL_CN:
+                        args.ucTVStandard = ATOM_TV_PALCN;
+                        break;
+                }
+                args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+        } else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+                args.ucTVStandard = ATOM_TV_CV;
+                args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+        } else {
+                switch (radeon_crtc->rmx_type) {
+                case RMX_FULL:
+                        args.ucEnable = ATOM_SCALER_EXPANSION;
+                        break;
+                case RMX_CENTER:
+                        args.ucEnable = ATOM_SCALER_CENTER;
+                        break;
+                case RMX_ASPECT:
+                        args.ucEnable = ATOM_SCALER_EXPANSION;
+                        break;
+                default:
+                        if (ASIC_IS_AVIVO(rdev))
+                                args.ucEnable = ATOM_SCALER_DISABLE;
+                        else
+                                args.ucEnable = ATOM_SCALER_CENTER;
+                        break;
+                }
+        }
+        atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+        if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+            && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+                atom_rv515_force_tv_scaler(rdev);
+        }
+}
+
 static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
 {
         struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -203,6 +329,12 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
         if (ASIC_IS_AVIVO(rdev)) {
                 uint32_t ss_cntl;
 
+                if ((rdev->family == CHIP_RS600) ||
+                    (rdev->family == CHIP_RS690) ||
+                    (rdev->family == CHIP_RS740))
+                        pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+                                      RADEON_PLL_PREFER_CLOSEST_LOWER);
+
                 if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)        /* range limits??? */
                         pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
                 else
@@ -321,7 +453,7 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
         struct drm_gem_object *obj;
         struct drm_radeon_gem_object *obj_priv;
         uint64_t fb_location;
-        uint32_t fb_format, fb_pitch_pixels;
+        uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 
         if (!crtc->fb)
                 return -EINVAL;
@@ -358,7 +490,14 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
                 return -EINVAL;
         }
 
-        /* TODO tiling */
+        radeon_object_get_tiling_flags(obj->driver_private,
+                                       &tiling_flags, NULL);
+        if (tiling_flags & RADEON_TILING_MACRO)
+                fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+
+        if (tiling_flags & RADEON_TILING_MICRO)
+                fb_format |= AVIVO_D1GRPH_TILED;
+
         if (radeon_crtc->crtc_id == 0)
                 WREG32(AVIVO_D1VGA_CONTROL, 0);
         else
@@ -509,6 +648,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc,
                 radeon_crtc_set_base(crtc, x, y, old_fb);
                 radeon_legacy_atom_set_surface(crtc);
         }
+        atombios_overscan_setup(crtc, mode, adjusted_mode);
+        atombios_scaler_setup(crtc);
+        radeon_bandwidth_update(rdev);
         return 0;
 }
 
@@ -516,6 +658,8 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc,
                                      struct drm_display_mode *mode,
                                      struct drm_display_mode *adjusted_mode)
 {
+        if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+                return false;
         return true;
 }
 
@@ -548,148 +692,3 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
                     AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
         drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }
-
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-                               struct drm_display_mode *mode1,
-                               uint32_t pixel_bytes1,
-                               struct drm_display_mode *mode2,
-                               uint32_t pixel_bytes2)
-{
-        struct radeon_device *rdev = dev->dev_private;
-        fixed20_12 min_mem_eff;
-        fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
-        fixed20_12 sclk_ff, mclk_ff;
-        uint32_t dc_lb_memory_split, temp;
-
-        min_mem_eff.full = rfixed_const_8(0);
-        if (rdev->disp_priority == 2) {
-                uint32_t mc_init_misc_lat_timer = 0;
-                if (rdev->family == CHIP_RV515)
-                        mc_init_misc_lat_timer =
-                            RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
-                else if (rdev->family == CHIP_RS690)
-                        mc_init_misc_lat_timer =
-                            RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
-
-                mc_init_misc_lat_timer &=
-                    ~(R300_MC_DISP1R_INIT_LAT_MASK <<
-                      R300_MC_DISP1R_INIT_LAT_SHIFT);
-                mc_init_misc_lat_timer &=
-                    ~(R300_MC_DISP0R_INIT_LAT_MASK <<
-                      R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-                if (mode2)
-                        mc_init_misc_lat_timer |=
-                            (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-                if (mode1)
-                        mc_init_misc_lat_timer |=
-                            (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-                if (rdev->family == CHIP_RV515)
-                        WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
-                                  mc_init_misc_lat_timer);
-                else if (rdev->family == CHIP_RS690)
-                        WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
-                                  mc_init_misc_lat_timer);
-        }
-
-        /*
-         * determine is there is enough bw for current mode
-         */
-        temp_ff.full = rfixed_const(100);
-        mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-        mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-        sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-        sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-        temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-        temp_ff.full = rfixed_const(temp);
-        mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-        mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-
-        pix_clk.full = 0;
-        pix_clk2.full = 0;
-        peak_disp_bw.full = 0;
-        if (mode1) {
-                temp_ff.full = rfixed_const(1000);
-                pix_clk.full = rfixed_const(mode1->clock);      /* convert to fixed point */
-                pix_clk.full = rfixed_div(pix_clk, temp_ff);
-                temp_ff.full = rfixed_const(pixel_bytes1);
-                peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-        }
-        if (mode2) {
-                temp_ff.full = rfixed_const(1000);
-                pix_clk2.full = rfixed_const(mode2->clock);     /* convert to fixed point */
-                pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-                temp_ff.full = rfixed_const(pixel_bytes2);
-                peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-        }
-
-        if (peak_disp_bw.full >= mem_bw.full) {
-                DRM_ERROR
-                    ("You may not have enough display bandwidth for current mode\n"
-                     "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-                printk("peak disp bw %d, mem_bw %d\n",
-                       rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
-        }
-
-        /*
-         * Line Buffer Setup
-         * There is a single line buffer shared by both display controllers.
-         * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
-         * controllers.  The paritioning can either be done manually or via one of four
-         * preset allocations specified in bits 1:0:
-         * 0 - line buffer is divided in half and shared between each display controller
-         * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
-         * 2 - D1 gets the whole buffer
-         * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
-         * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
-         * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
-         * 14:4; D2 allocation follows D1.
-         */
-
-        /* is auto or manual better ? */
-        dc_lb_memory_split =
-            RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
-        dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-#if 1
-        /* auto */
-        if (mode1 && mode2) {
-                if (mode1->hdisplay > mode2->hdisplay) {
-                        if (mode1->hdisplay > 2560)
-                                dc_lb_memory_split |=
-                                    AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
-                        else
-                                dc_lb_memory_split |=
-                                    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-                } else if (mode2->hdisplay > mode1->hdisplay) {
-                        if (mode2->hdisplay > 2560)
-                                dc_lb_memory_split |=
-                                    AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-                        else
-                                dc_lb_memory_split |=
-                                    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-                } else
-                        dc_lb_memory_split |=
-                            AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-        } else if (mode1) {
-                dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
-        } else if (mode2) {
-                dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-        }
-#else
-        /* manual */
-        dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-        dc_lb_memory_split &=
-            ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
-              AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-        if (mode1) {
-                dc_lb_memory_split |=
-                    ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
-                     << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-        } else if (mode2) {
-                dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-        }
-#endif
-        WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
-}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c550932a108f..05a44896dffb 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -110,7 +110,7 @@ int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
         if (i < 0 || i > rdev->gart.num_gpu_pages) {
                 return -EINVAL;
         }
-        rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+        rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
         return 0;
 }
 
@@ -173,8 +173,12 @@ void r100_mc_setup(struct radeon_device *rdev)
                 DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
         }
         /* Write VRAM size in case we are limiting it */
-        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+        /* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
+         * if the aperture is 64MB but we have 32MB VRAM
+         * we report only 32MB VRAM but we have to set MC_FB_LOCATION
+         * to 64MB, otherwise the gpu accidentially dies */
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
         tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -215,7 +219,6 @@ int r100_mc_init(struct radeon_device *rdev)
         r100_pci_gart_disable(rdev);
 
         /* Setup GPU memory space */
-        rdev->mc.vram_location = 0xFFFFFFFFUL;
         rdev->mc.gtt_location = 0xFFFFFFFFUL;
         if (rdev->flags & RADEON_IS_AGP) {
                 r = radeon_agp_init(rdev);
@@ -753,6 +756,102 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
 }
 
 /**
+ * r100_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:             parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET0 - WAIT_UNTIL +_value
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT UNTIL packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+        struct radeon_cs_chunk *ib_chunk;
+        struct drm_mode_object *obj;
+        struct drm_crtc *crtc;
+        struct radeon_crtc *radeon_crtc;
+        struct radeon_cs_packet p3reloc, waitreloc;
+        int crtc_id;
+        int r;
+        uint32_t header, h_idx, reg;
+
+        ib_chunk = &p->chunks[p->chunk_ib_idx];
+
+        /* parse the wait until */
+        r = r100_cs_packet_parse(p, &waitreloc, p->idx);
+        if (r)
+                return r;
+
+        /* check its a wait until and only 1 count */
+        if (waitreloc.reg != RADEON_WAIT_UNTIL ||
+            waitreloc.count != 0) {
+                DRM_ERROR("vline wait had illegal wait until segment\n");
+                r = -EINVAL;
+                return r;
+        }
+
+        if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+                DRM_ERROR("vline wait had illegal wait until\n");
+                r = -EINVAL;
+                return r;
+        }
+
+        /* jump over the NOP */
+        r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+        if (r)
+                return r;
+
+        h_idx = p->idx - 2;
+        p->idx += waitreloc.count;
+        p->idx += p3reloc.count;
+
+        header = ib_chunk->kdata[h_idx];
+        crtc_id = ib_chunk->kdata[h_idx + 5];
+        reg = ib_chunk->kdata[h_idx] >> 2;
+        mutex_lock(&p->rdev->ddev->mode_config.mutex);
+        obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+        if (!obj) {
+                DRM_ERROR("cannot find crtc %d\n", crtc_id);
+                r = -EINVAL;
+                goto out;
+        }
+        crtc = obj_to_crtc(obj);
+        radeon_crtc = to_radeon_crtc(crtc);
+        crtc_id = radeon_crtc->crtc_id;
+
+        if (!crtc->enabled) {
+                /* if the CRTC isn't enabled - we need to nop out the wait until */
+                ib_chunk->kdata[h_idx + 2] = PACKET2(0);
+                ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+        } else if (crtc_id == 1) {
+                switch (reg) {
+                case AVIVO_D1MODE_VLINE_START_END:
+                        header &= R300_CP_PACKET0_REG_MASK;
+                        header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+                        break;
+                case RADEON_CRTC_GUI_TRIG_VLINE:
+                        header &= R300_CP_PACKET0_REG_MASK;
+                        header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
+                        break;
+                default:
+                        DRM_ERROR("unknown crtc reloc\n");
+                        r = -EINVAL;
+                        goto out;
+                }
+                ib_chunk->kdata[h_idx] = header;
+                ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+        }
+out:
+        mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+        return r;
+}
+
+/**
  * r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
  * @parser:             parser structure holding parsing context.
  * @data:               pointer to relocation data
@@ -814,6 +913,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
         unsigned idx;
         bool onereg;
         int r;
+        u32 tile_flags = 0;
 
         ib = p->ib->ptr;
         ib_chunk = &p->chunks[p->chunk_ib_idx];
@@ -825,6 +925,15 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
         }
         for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
                 switch (reg) {
+                case RADEON_CRTC_GUI_TRIG_VLINE:
+                        r = r100_cs_packet_parse_vline(p);
+                        if (r) {
+                                DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+                                                idx, reg);
+                                r100_cs_dump_packet(p, pkt);
+                                return r;
+                        }
+                        break;
                 /* FIXME: only allow PACKET3 blit? easier to check for out of
                  * range access */
                 case RADEON_DST_PITCH_OFFSET:
@@ -838,7 +947,20 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
                         }
                         tmp = ib_chunk->kdata[idx] & 0x003fffff;
                         tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-                        ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+                        if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+                                tile_flags |= RADEON_DST_TILE_MACRO;
+                        if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+                                if (reg == RADEON_SRC_PITCH_OFFSET) {
+                                        DRM_ERROR("Cannot src blit from microtiled surface\n");
+                                        r100_cs_dump_packet(p, pkt);
+                                        return -EINVAL;
+                                }
+                                tile_flags |= RADEON_DST_TILE_MICRO;
+                        }
+
+                        tmp |= tile_flags;
+                        ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
                         break;
                 case RADEON_RB3D_DEPTHOFFSET:
                 case RADEON_RB3D_COLOROFFSET:
@@ -869,6 +991,11 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
                 case R300_TX_OFFSET_0+52:
                 case R300_TX_OFFSET_0+56:
                 case R300_TX_OFFSET_0+60:
+                        /* rn50 has no 3D engine so fail on any 3d setup */
+                        if (ASIC_IS_RN50(p->rdev)) {
+                                DRM_ERROR("attempt to use RN50 3D engine failed\n");
+                                return -EINVAL;
+                        }
                         r = r100_cs_packet_next_reloc(p, &reloc);
                         if (r) {
                                 DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
@@ -878,6 +1005,25 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
                         }
                         ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
                         break;
+                case R300_RB3D_COLORPITCH0:
+                case RADEON_RB3D_COLORPITCH:
+                        r = r100_cs_packet_next_reloc(p, &reloc);
+                        if (r) {
+                                DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+                                          idx, reg);
+                                r100_cs_dump_packet(p, pkt);
+                                return r;
+                        }
+
+                        if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+                                tile_flags |= RADEON_COLOR_TILE_ENABLE;
+                        if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+                                tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
+
+                        tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+                        tmp |= tile_flags;
+                        ib[idx] = tmp;
+                        break;
                 default:
                         /* FIXME: we don't want to allow anyothers packet */
                         break;
@@ -1256,29 +1402,100 @@ static void r100_vram_get_type(struct radeon_device *rdev)
         }
 }
 
-void r100_vram_info(struct radeon_device *rdev)
+static u32 r100_get_accessible_vram(struct radeon_device *rdev)
 {
-        r100_vram_get_type(rdev);
+        u32 aper_size;
+        u8 byte;
+
+        aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
+
+        /* Set HDP_APER_CNTL only on cards that are known not to be broken,
+         * that is has the 2nd generation multifunction PCI interface
+         */
+        if (rdev->family == CHIP_RV280 ||
+            rdev->family >= CHIP_RV350) {
+                WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
+                       ~RADEON_HDP_APER_CNTL);
+                DRM_INFO("Generation 2 PCI interface, using max accessible memory\n");
+                return aper_size * 2;
+        }
+
+        /* Older cards have all sorts of funny issues to deal with. First
+         * check if it's a multifunction card by reading the PCI config
+         * header type... Limit those to one aperture size
+         */
+        pci_read_config_byte(rdev->pdev, 0xe, &byte);
+        if (byte & 0x80) {
+                DRM_INFO("Generation 1 PCI interface in multifunction mode\n");
+                DRM_INFO("Limiting VRAM to one aperture\n");
+                return aper_size;
+        }
+
+        /* Single function older card. We read HDP_APER_CNTL to see how the BIOS
+         * have set it up. We don't write this as it's broken on some ASICs but
+         * we expect the BIOS to have done the right thing (might be too optimistic...)
+         */
+        if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL)
+                return aper_size * 2;
+        return aper_size;
+}
+
+void r100_vram_init_sizes(struct radeon_device *rdev)
+{
+        u64 config_aper_size;
+        u32 accessible;
+
+        config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
 
         if (rdev->flags & RADEON_IS_IGP) {
                 uint32_t tom;
                 /* read NB_TOM to get the amount of ram stolen for the GPU */
                 tom = RREG32(RADEON_NB_TOM);
-                rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-                WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+                rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+                /* for IGPs we need to keep VRAM where it was put by the BIOS */
+                rdev->mc.vram_location = (tom & 0xffff) << 16;
+                WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+                rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
         } else {
-                rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+                rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
                 /* Some production boards of m6 will report 0
                  * if it's 8 MB
                  */
-                if (rdev->mc.vram_size == 0) {
-                        rdev->mc.vram_size = 8192 * 1024;
-                        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+                if (rdev->mc.real_vram_size == 0) {
+                        rdev->mc.real_vram_size = 8192 * 1024;
+                        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
                 }
+                /* let driver place VRAM */
+                rdev->mc.vram_location = 0xFFFFFFFFUL;
+                 /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM - 
+                  * Novell bug 204882 + along with lots of ubuntu ones */
+                if (config_aper_size > rdev->mc.real_vram_size)
+                        rdev->mc.mc_vram_size = config_aper_size;
+                else
+                        rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
         }
 
+        /* work out accessible VRAM */
+        accessible = r100_get_accessible_vram(rdev);
+
         rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
         rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+
+        if (accessible > rdev->mc.aper_size)
+                accessible = rdev->mc.aper_size;
+
+        if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+                rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+        if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+                rdev->mc.real_vram_size = rdev->mc.aper_size;
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+        r100_vram_get_type(rdev);
+
+        r100_vram_init_sizes(rdev);
 }
 
 
@@ -1533,3 +1750,530 @@ int r100_debugfs_mc_info_init(struct radeon_device *rdev)
         return 0;
 #endif
 }
+
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+                         uint32_t tiling_flags, uint32_t pitch,
+                         uint32_t offset, uint32_t obj_size)
+{
+        int surf_index = reg * 16;
+        int flags = 0;
+
+        /* r100/r200 divide by 16 */
+        if (rdev->family < CHIP_R300)
+                flags = pitch / 16;
+        else
+                flags = pitch / 8;
+
+        if (rdev->family <= CHIP_RS200) {
+                if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+                                 == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+                        flags |= RADEON_SURF_TILE_COLOR_BOTH;
+                if (tiling_flags & RADEON_TILING_MACRO)
+                        flags |= RADEON_SURF_TILE_COLOR_MACRO;
+        } else if (rdev->family <= CHIP_RV280) {
+                if (tiling_flags & (RADEON_TILING_MACRO))
+                        flags |= R200_SURF_TILE_COLOR_MACRO;
+                if (tiling_flags & RADEON_TILING_MICRO)
+                        flags |= R200_SURF_TILE_COLOR_MICRO;
+        } else {
+                if (tiling_flags & RADEON_TILING_MACRO)
+                        flags |= R300_SURF_TILE_MACRO;
+                if (tiling_flags & RADEON_TILING_MICRO)
+                        flags |= R300_SURF_TILE_MICRO;
+        }
+
+        DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+        WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
+        WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
+        WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
+        return 0;
+}
+
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg)
+{
+        int surf_index = reg * 16;
+        WREG32(RADEON_SURFACE0_INFO + surf_index, 0);
+}
+
+void r100_bandwidth_update(struct radeon_device *rdev)
+{
+        fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+        fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+        fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+        uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+        fixed20_12 memtcas_ff[8] = {
+                fixed_init(1),
+                fixed_init(2),
+                fixed_init(3),
+                fixed_init(0),
+                fixed_init_half(1),
+                fixed_init_half(2),
+                fixed_init(0),
+        };
+        fixed20_12 memtcas_rs480_ff[8] = {
+                fixed_init(0),
+                fixed_init(1),
+                fixed_init(2),
+                fixed_init(3),
+                fixed_init(0),
+                fixed_init_half(1),
+                fixed_init_half(2),
+                fixed_init_half(3),
+        };
+        fixed20_12 memtcas2_ff[8] = {
+                fixed_init(0),
+                fixed_init(1),
+                fixed_init(2),
+                fixed_init(3),
+                fixed_init(4),
+                fixed_init(5),
+                fixed_init(6),
+                fixed_init(7),
+        };
+        fixed20_12 memtrbs[8] = {
+                fixed_init(1),
+                fixed_init_half(1),
+                fixed_init(2),
+                fixed_init_half(2),
+                fixed_init(3),
+                fixed_init_half(3),
+                fixed_init(4),
+                fixed_init_half(4)
+        };
+        fixed20_12 memtrbs_r4xx[8] = {
+                fixed_init(4),
+                fixed_init(5),
+                fixed_init(6),
+                fixed_init(7),
+                fixed_init(8),
+                fixed_init(9),
+                fixed_init(10),
+                fixed_init(11)
+        };
+        fixed20_12 min_mem_eff;
+        fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+        fixed20_12 cur_latency_mclk, cur_latency_sclk;
+        fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+                disp_drain_rate2, read_return_rate;
+        fixed20_12 time_disp1_drop_priority;
+        int c;
+        int cur_size = 16;       /* in octawords */
+        int critical_point = 0, critical_point2;
+/*      uint32_t read_return_rate, time_disp1_drop_priority; */
+        int stop_req, max_stop_req;
+        struct drm_display_mode *mode1 = NULL;
+        struct drm_display_mode *mode2 = NULL;
+        uint32_t pixel_bytes1 = 0;
+        uint32_t pixel_bytes2 = 0;
+
+        if (rdev->mode_info.crtcs[0]->base.enabled) {
+                mode1 = &rdev->mode_info.crtcs[0]->base.mode;
+                pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
+        }
+        if (rdev->mode_info.crtcs[1]->base.enabled) {
+                mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+                pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+        }
+
+        min_mem_eff.full = rfixed_const_8(0);
+        /* get modes */
+        if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+                uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+                mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+                mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+                /* check crtc enables */
+                if (mode2)
+                        mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+                if (mode1)
+                        mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+                WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+        }
+
+        /*
+         * determine is there is enough bw for current mode
+         */
+        mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+        temp_ff.full = rfixed_const(100);
+        mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+        sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+        sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+        temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+        temp_ff.full = rfixed_const(temp);
+        mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+        pix_clk.full = 0;
+        pix_clk2.full = 0;
+        peak_disp_bw.full = 0;
+        if (mode1) {
+                temp_ff.full = rfixed_const(1000);
+                pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+                pix_clk.full = rfixed_div(pix_clk, temp_ff);
+                temp_ff.full = rfixed_const(pixel_bytes1);
+                peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+        }
+        if (mode2) {
+                temp_ff.full = rfixed_const(1000);
+                pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+                pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+                temp_ff.full = rfixed_const(pixel_bytes2);
+                peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+        }
+
+        mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+        if (peak_disp_bw.full >= mem_bw.full) {
+                DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+                          "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+        }
+
+        /*  Get values from the EXT_MEM_CNTL register...converting its contents. */
+        temp = RREG32(RADEON_MEM_TIMING_CNTL);
+        if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+                mem_trcd = ((temp >> 2) & 0x3) + 1;
+                mem_trp  = ((temp & 0x3)) + 1;
+                mem_tras = ((temp & 0x70) >> 4) + 1;
+        } else if (rdev->family == CHIP_R300 ||
+                   rdev->family == CHIP_R350) { /* r300, r350 */
+                mem_trcd = (temp & 0x7) + 1;
+                mem_trp = ((temp >> 8) & 0x7) + 1;
+                mem_tras = ((temp >> 11) & 0xf) + 4;
+        } else if (rdev->family == CHIP_RV350 ||
+                   rdev->family <= CHIP_RV380) {
+                /* rv3x0 */
+                mem_trcd = (temp & 0x7) + 3;
+                mem_trp = ((temp >> 8) & 0x7) + 3;
+                mem_tras = ((temp >> 11) & 0xf) + 6;
+        } else if (rdev->family == CHIP_R420 ||
+                   rdev->family == CHIP_R423 ||
+                   rdev->family == CHIP_RV410) {
+                /* r4xx */
+                mem_trcd = (temp & 0xf) + 3;
+                if (mem_trcd > 15)
+                        mem_trcd = 15;
+                mem_trp = ((temp >> 8) & 0xf) + 3;
+                if (mem_trp > 15)
+                        mem_trp = 15;
+                mem_tras = ((temp >> 12) & 0x1f) + 6;
+                if (mem_tras > 31)
+                        mem_tras = 31;
+        } else { /* RV200, R200 */
+                mem_trcd = (temp & 0x7) + 1;
+                mem_trp = ((temp >> 8) & 0x7) + 1;
+                mem_tras = ((temp >> 12) & 0xf) + 4;
+        }
+        /* convert to FF */
+        trcd_ff.full = rfixed_const(mem_trcd);
+        trp_ff.full = rfixed_const(mem_trp);
+        tras_ff.full = rfixed_const(mem_tras);
+
+        /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+        temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+        data = (temp & (7 << 20)) >> 20;
+        if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+                if (rdev->family == CHIP_RS480) /* don't think rs400 */
+                        tcas_ff = memtcas_rs480_ff[data];
+                else
+                        tcas_ff = memtcas_ff[data];
+        } else
+                tcas_ff = memtcas2_ff[data];
+
+        if (rdev->family == CHIP_RS400 ||
+            rdev->family == CHIP_RS480) {
+                /* extra cas latency stored in bits 23-25 0-4 clocks */
+                data = (temp >> 23) & 0x7;
+                if (data < 5)
+                        tcas_ff.full += rfixed_const(data);
+        }
+
+        if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+                /* on the R300, Tcas is included in Trbs.
+                 */
+                temp = RREG32(RADEON_MEM_CNTL);
+                data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+                if (data == 1) {
+                        if (R300_MEM_USE_CD_CH_ONLY & temp) {
+                                temp = RREG32(R300_MC_IND_INDEX);
+                                temp &= ~R300_MC_IND_ADDR_MASK;
+                                temp |= R300_MC_READ_CNTL_CD_mcind;
+                                WREG32(R300_MC_IND_INDEX, temp);
+                                temp = RREG32(R300_MC_IND_DATA);
+                                data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+                        } else {
+                                temp = RREG32(R300_MC_READ_CNTL_AB);
+                                data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+                        }
+                } else {
+                        temp = RREG32(R300_MC_READ_CNTL_AB);
+                        data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+                }
+                if (rdev->family == CHIP_RV410 ||
+                    rdev->family == CHIP_R420 ||
+                    rdev->family == CHIP_R423)
+                        trbs_ff = memtrbs_r4xx[data];
+                else
+                        trbs_ff = memtrbs[data];
+                tcas_ff.full += trbs_ff.full;
+        }
+
+        sclk_eff_ff.full = sclk_ff.full;
+
+        if (rdev->flags & RADEON_IS_AGP) {
+                fixed20_12 agpmode_ff;
+                agpmode_ff.full = rfixed_const(radeon_agpmode);
+                temp_ff.full = rfixed_const_666(16);
+                sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+        }
+        /* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+        if (ASIC_IS_R300(rdev)) {
+                sclk_delay_ff.full = rfixed_const(250);
+        } else {
+                if ((rdev->family == CHIP_RV100) ||
+                    rdev->flags & RADEON_IS_IGP) {
+                        if (rdev->mc.vram_is_ddr)
+                                sclk_delay_ff.full = rfixed_const(41);
+                        else
+                                sclk_delay_ff.full = rfixed_const(33);
+                } else {
+                        if (rdev->mc.vram_width == 128)
+                                sclk_delay_ff.full = rfixed_const(57);
+                        else
+                                sclk_delay_ff.full = rfixed_const(41);
+                }
+        }
+
+        mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+        if (rdev->mc.vram_is_ddr) {
+                if (rdev->mc.vram_width == 32) {
+                        k1.full = rfixed_const(40);
+                        c  = 3;
+                } else {
+                        k1.full = rfixed_const(20);
+                        c  = 1;
+                }
+        } else {
+                k1.full = rfixed_const(40);
+                c  = 3;
+        }
+
+        temp_ff.full = rfixed_const(2);
+        mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+        temp_ff.full = rfixed_const(c);
+        mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+        temp_ff.full = rfixed_const(4);
+        mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+        mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+        mc_latency_mclk.full += k1.full;
+
+        mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+        mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+        /*
+          HW cursor time assuming worst case of full size colour cursor.
+        */
+        temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+        temp_ff.full += trcd_ff.full;
+        if (temp_ff.full < tras_ff.full)
+                temp_ff.full = tras_ff.full;
+        cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+        temp_ff.full = rfixed_const(cur_size);
+        cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+        /*
+          Find the total latency for the display data.
+        */
+        disp_latency_overhead.full = rfixed_const(80);
+        disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+        mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+        mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+        if (mc_latency_mclk.full > mc_latency_sclk.full)
+                disp_latency.full = mc_latency_mclk.full;
+        else
+                disp_latency.full = mc_latency_sclk.full;
+
+        /* setup Max GRPH_STOP_REQ default value */
+        if (ASIC_IS_RV100(rdev))
+                max_stop_req = 0x5c;
+        else
+                max_stop_req = 0x7c;
+
+        if (mode1) {
+                /*  CRTC1
+                    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+                    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+                */
+                stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+                if (stop_req > max_stop_req)
+                        stop_req = max_stop_req;
+
+                /*
+                  Find the drain rate of the display buffer.
+                */
+                temp_ff.full = rfixed_const((16/pixel_bytes1));
+                disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+                /*
+                  Find the critical point of the display buffer.
+                */
+                crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+                crit_point_ff.full += rfixed_const_half(0);
+
+                critical_point = rfixed_trunc(crit_point_ff);
+
+                if (rdev->disp_priority == 2) {
+                        critical_point = 0;
+                }
+
+                /*
+                  The critical point should never be above max_stop_req-4.  Setting
+                  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+                */
+                if (max_stop_req - critical_point < 4)
+                        critical_point = 0;
+
+                if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+                        /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+                        critical_point = 0x10;
+                }
+
+                temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+                temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+                temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+                temp &= ~(RADEON_GRPH_START_REQ_MASK);
+                if ((rdev->family == CHIP_R350) &&
+                    (stop_req > 0x15)) {
+                        stop_req -= 0x10;
+                }
+                temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+                temp |= RADEON_GRPH_BUFFER_SIZE;
+                temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+                          RADEON_GRPH_CRITICAL_AT_SOF |
+                          RADEON_GRPH_STOP_CNTL);
+                /*
+                  Write the result into the register.
+                */
+                WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+                                                       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+                if ((rdev->family == CHIP_RS400) ||
+                    (rdev->family == CHIP_RS480)) {
+                        /* attempt to program RS400 disp regs correctly ??? */
+                        temp = RREG32(RS400_DISP1_REG_CNTL);
+                        temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+                                  RS400_DISP1_STOP_REQ_LEVEL_MASK);
+                        WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+                                                       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+                                                       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+                        temp = RREG32(RS400_DMIF_MEM_CNTL1);
+                        temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+                                  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+                        WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+                                                      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+                                                      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+                }
+#endif
+
+                DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+                          /*      (unsigned int)info->SavedReg->grph_buffer_cntl, */
+                          (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+        }
+
+        if (mode2) {
+                u32 grph2_cntl;
+                stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+                if (stop_req > max_stop_req)
+                        stop_req = max_stop_req;
+
+                /*
+                  Find the drain rate of the display buffer.
+                */
+                temp_ff.full = rfixed_const((16/pixel_bytes2));
+                disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+                grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+                grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+                grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+                grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+                if ((rdev->family == CHIP_R350) &&
+                    (stop_req > 0x15)) {
+                        stop_req -= 0x10;
+                }
+                grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+                grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+                grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+                          RADEON_GRPH_CRITICAL_AT_SOF |
+                          RADEON_GRPH_STOP_CNTL);
+
+                if ((rdev->family == CHIP_RS100) ||
+                    (rdev->family == CHIP_RS200))
+                        critical_point2 = 0;
+                else {
+                        temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+                        temp_ff.full = rfixed_const(temp);
+                        temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+                        if (sclk_ff.full < temp_ff.full)
+                                temp_ff.full = sclk_ff.full;
+
+                        read_return_rate.full = temp_ff.full;
+
+                        if (mode1) {
+                                temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+                                time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+                        } else {
+                                time_disp1_drop_priority.full = 0;
+                        }
+                        crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+                        crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+                        crit_point_ff.full += rfixed_const_half(0);
+
+                        critical_point2 = rfixed_trunc(crit_point_ff);
+
+                        if (rdev->disp_priority == 2) {
+                                critical_point2 = 0;
+                        }
+
+                        if (max_stop_req - critical_point2 < 4)
+                                critical_point2 = 0;
+
+                }
+
+                if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+                        /* some R300 cards have problem with this set to 0 */
+                        critical_point2 = 0x10;
+                }
+
+                WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+                                                  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+                if ((rdev->family == CHIP_RS400) ||
+                    (rdev->family == CHIP_RS480)) {
+#if 0
+                        /* attempt to program RS400 disp2 regs correctly ??? */
+                        temp = RREG32(RS400_DISP2_REQ_CNTL1);
+                        temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+                                  RS400_DISP2_STOP_REQ_LEVEL_MASK);
+                        WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+                                                       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+                                                       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+                        temp = RREG32(RS400_DISP2_REQ_CNTL2);
+                        temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+                                  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+                        WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+                                                       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+                                                       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+                        WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+                        WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+                        WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
+                        WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+                }
+
+                DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+                          (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+        }
+}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index e2ed5bc08170..9c8d41534a5d 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -30,6 +30,8 @@
 #include "drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_drm.h"
+#include "radeon_share.h"
 
 /* r300,r350,rv350,rv370,rv380 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -44,6 +46,7 @@ int r100_gui_wait_for_idle(struct radeon_device *rdev);
 int r100_cs_packet_parse(struct radeon_cs_parser *p,
                          struct radeon_cs_packet *pkt,
                          unsigned idx);
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
                               struct radeon_cs_reloc **cs_reloc);
 int r100_cs_parse_packet0(struct radeon_cs_parser *p,
@@ -150,8 +153,13 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
         if (i < 0 || i > rdev->gart.num_gpu_pages) {
                 return -EINVAL;
         }
-        addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
-        writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+        addr = (lower_32_bits(addr) >> 8) |
+               ((upper_32_bits(addr) & 0xff) << 24) |
+               0xc;
+        /* on x86 we want this to be CPU endian, on powerpc
+         * on powerpc without HW swappers, it'll get swapped on way
+         * into VRAM - so no need for cpu_to_le32 on VRAM tables */
+        writel(addr, ((void __iomem *)ptr) + (i * 4));
         return 0;
 }
 
@@ -579,10 +587,8 @@ void r300_vram_info(struct radeon_device *rdev)
         } else {
                 rdev->mc.vram_width = 64;
         }
-        rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-        rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-        rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+        r100_vram_init_sizes(rdev);
 }
 
 
@@ -970,7 +976,7 @@ static inline void r300_cs_track_clear(struct r300_cs_track *track)
 
 static const unsigned r300_reg_safe_bm[159] = {
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-        0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -1019,7 +1025,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
         struct radeon_cs_reloc *reloc;
         struct r300_cs_track *track;
         volatile uint32_t *ib;
-        uint32_t tmp;
+        uint32_t tmp, tile_flags = 0;
         unsigned i;
         int r;
 
@@ -1027,6 +1033,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
         ib_chunk = &p->chunks[p->chunk_ib_idx];
         track = (struct r300_cs_track*)p->track;
         switch(reg) {
+        case AVIVO_D1MODE_VLINE_START_END:
+        case RADEON_CRTC_GUI_TRIG_VLINE:
+                r = r100_cs_packet_parse_vline(p);
+                if (r) {
+                        DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+                                        idx, reg);
+                        r100_cs_dump_packet(p, pkt);
+                        return r;
+                }
+                break;
         case RADEON_DST_PITCH_OFFSET:
         case RADEON_SRC_PITCH_OFFSET:
                 r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1038,7 +1054,19 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
                 }
                 tmp = ib_chunk->kdata[idx] & 0x003fffff;
                 tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-                ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+                        tile_flags |= RADEON_DST_TILE_MACRO;
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+                        if (reg == RADEON_SRC_PITCH_OFFSET) {
+                                DRM_ERROR("Cannot src blit from microtiled surface\n");
+                                r100_cs_dump_packet(p, pkt);
+                                return -EINVAL;
+                        }
+                        tile_flags |= RADEON_DST_TILE_MICRO;
+                }
+                tmp |= tile_flags;
+                ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
                 break;
         case R300_RB3D_COLOROFFSET0:
         case R300_RB3D_COLOROFFSET1:
@@ -1127,6 +1155,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
                 /* RB3D_COLORPITCH1 */
                 /* RB3D_COLORPITCH2 */
                 /* RB3D_COLORPITCH3 */
+                r = r100_cs_packet_next_reloc(p, &reloc);
+                if (r) {
+                        DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+                                  idx, reg);
+                        r100_cs_dump_packet(p, pkt);
+                        return r;
+                }
+
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+                        tile_flags |= R300_COLOR_TILE_ENABLE;
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+                        tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+
+                tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+                tmp |= tile_flags;
+                ib[idx] = tmp;
+
                 i = (reg - 0x4E38) >> 2;
                 track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
                 switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
@@ -1182,6 +1227,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
                 break;
         case 0x4F24:
                 /* ZB_DEPTHPITCH */
+                r = r100_cs_packet_next_reloc(p, &reloc);
+                if (r) {
+                        DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+                                  idx, reg);
+                        r100_cs_dump_packet(p, pkt);
+                        return r;
+                }
+
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+                        tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+                if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+                        tile_flags |= R300_DEPTHMICROTILE_TILED;;
+
+                tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+                tmp |= tile_flags;
+                ib[idx] = tmp;
+
                 track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
                 break;
         case 0x4104:
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 70f48609515e..4b7afef35a65 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -27,7 +27,9 @@
 #ifndef _R300_REG_H_
 #define _R300_REG_H_
 
-
+#define R300_SURF_TILE_MACRO (1<<16)
+#define R300_SURF_TILE_MICRO (2<<16)
+#define R300_SURF_TILE_BOTH (3<<16)
 
 
 #define R300_MC_INIT_MISC_LAT_TIMER     0x180
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index 9070a1c2ce23..036691b38cb7 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,7 @@
 #define AVIVO_D1MODE_DATA_FORMAT                0x6528
 #       define AVIVO_D1MODE_INTERLEAVE_EN       (1 << 0)
 #define AVIVO_D1MODE_DESKTOP_HEIGHT             0x652C
+#define AVIVO_D1MODE_VLINE_START_END            0x6538
 #define AVIVO_D1MODE_VIEWPORT_START             0x6580
 #define AVIVO_D1MODE_VIEWPORT_SIZE              0x6584
 #define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6588
@@ -496,6 +497,7 @@
 #define AVIVO_D2CUR_SIZE                        0x6c10
 #define AVIVO_D2CUR_POSITION                    0x6c14
 
+#define AVIVO_D2MODE_VLINE_START_END            0x6d38
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 570a244bd88b..09fb0b6ec7dd 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -28,6 +28,7 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* r520,rv530,rv560,rv570,r580 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -94,8 +95,8 @@ int r520_mc_init(struct radeon_device *rdev)
                        "programming pipes. Bad things might happen.\n");
         }
         /* Write VRAM size in case we are limiting it */
-        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
         tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32_MC(R520_MC_FB_LOCATION, tmp);
@@ -226,9 +227,20 @@ static void r520_vram_get_type(struct radeon_device *rdev)
 
 void r520_vram_info(struct radeon_device *rdev)
 {
+        fixed20_12 a;
+
         r520_vram_get_type(rdev);
-        rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-        rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-        rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+        r100_vram_init_sizes(rdev);
+        /* FIXME: we should enforce default clock in case GPU is not in
+         * default setup
+         */
+        a.full = rfixed_const(100);
+        rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+        rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void r520_bandwidth_update(struct radeon_device *rdev)
+{
+        rv515_bandwidth_avivo_update(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c45559fc97fd..538cd907df69 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -67,7 +67,7 @@ int r600_mc_init(struct radeon_device *rdev)
                        "programming pipes. Bad things might happen.\n");
         }
 
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
         tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
         WREG32(R600_MC_VM_FB_LOCATION, tmp);
@@ -140,7 +140,8 @@ void r600_vram_get_type(struct radeon_device *rdev)
 void r600_vram_info(struct radeon_device *rdev)
 {
         r600_vram_get_type(rdev);
-        rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+        rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE);
+        rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
         /* Could aper size report 0 ? */
         rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d61f2fc61df5..b1d945b8ed6c 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -64,6 +64,7 @@ extern int radeon_agpmode;
 extern int radeon_vram_limit;
 extern int radeon_gart_size;
 extern int radeon_benchmarking;
+extern int radeon_testing;
 extern int radeon_connector_table;
 
 /*
@@ -113,6 +114,7 @@ enum radeon_family {
         CHIP_RV770,
         CHIP_RV730,
         CHIP_RV710,
+        CHIP_RS880,
         CHIP_LAST,
 };
 
@@ -201,6 +203,14 @@ int radeon_fence_wait_last(struct radeon_device *rdev);
 struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
 void radeon_fence_unref(struct radeon_fence **fence);
 
+/*
+ * Tiling registers
+ */
+struct radeon_surface_reg {
+        struct radeon_object *robj;
+};
+
+#define RADEON_GEM_MAX_SURFACES 8
 
 /*
  * Radeon buffer.
@@ -213,6 +223,7 @@ struct radeon_object_list {
         uint64_t                gpu_offset;
         unsigned                rdomain;
         unsigned                wdomain;
+        uint32_t                tiling_flags;
 };
 
 int radeon_object_init(struct radeon_device *rdev);
@@ -242,8 +253,15 @@ void radeon_object_list_clean(struct list_head *head);
 int radeon_object_fbdev_mmap(struct radeon_object *robj,
                              struct vm_area_struct *vma);
 unsigned long radeon_object_size(struct radeon_object *robj);
-
-
+void radeon_object_clear_surface_reg(struct radeon_object *robj);
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+                               bool force_drop);
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+                                    uint32_t tiling_flags, uint32_t pitch);
+void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch);
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+                           struct ttm_mem_reg *mem);
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
 /*
  * GEM objects.
  */
@@ -315,8 +333,11 @@ struct radeon_mc {
         unsigned                gtt_location;
         unsigned                gtt_size;
         unsigned                vram_location;
-        unsigned                vram_size;
+        /* for some chips with <= 32MB we need to lie
+         * about vram size near mc fb location */
+        unsigned                mc_vram_size;
         unsigned                vram_width;
+        unsigned                real_vram_size;
         int                     vram_mtrr;
         bool                    vram_is_ddr;
 };
@@ -474,6 +495,39 @@ struct radeon_wb {
         uint64_t                gpu_addr;
 };
 
+/**
+ * struct radeon_pm - power management datas
+ * @max_bandwidth:      maximum bandwidth the gpu has (MByte/s)
+ * @igp_sideport_mclk:  sideport memory clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_system_mclk:    system clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_clk:    ht link clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_width:  ht link width in bits (rs690,rs740,rs780,rs880)
+ * @k8_bandwidth:       k8 bandwidth the gpu has (MByte/s) (IGP)
+ * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
+ * @ht_bandwidth:       ht bandwidth the gpu has (MByte/s) (IGP)
+ * @core_bandwidth:     core GPU bandwidth the gpu has (MByte/s) (IGP)
+ * @sclk:               GPU clock Mhz (core bandwith depends of this clock)
+ * @needed_bandwidth:   current bandwidth needs
+ *
+ * It keeps track of various data needed to take powermanagement decision.
+ * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Equation between gpu/memory clock and available bandwidth is hw dependent
+ * (type of memory, bus size, efficiency, ...)
+ */
+struct radeon_pm {
+        fixed20_12              max_bandwidth;
+        fixed20_12              igp_sideport_mclk;
+        fixed20_12              igp_system_mclk;
+        fixed20_12              igp_ht_link_clk;
+        fixed20_12              igp_ht_link_width;
+        fixed20_12              k8_bandwidth;
+        fixed20_12              sideport_bandwidth;
+        fixed20_12              ht_bandwidth;
+        fixed20_12              core_bandwidth;
+        fixed20_12              sclk;
+        fixed20_12              needed_bandwidth;
+};
+
 
 /*
  * Benchmarking
@@ -482,6 +536,12 @@ void radeon_benchmark(struct radeon_device *rdev);
 
 
 /*
+ * Testing
+ */
+void radeon_test_moves(struct radeon_device *rdev);
+
+
+/*
  * Debugfs
  */
 int radeon_debugfs_add_files(struct radeon_device *rdev,
@@ -535,6 +595,11 @@ struct radeon_asic {
         void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
         void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
         void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+        int (*set_surface_reg)(struct radeon_device *rdev, int reg,
+                               uint32_t tiling_flags, uint32_t pitch,
+                               uint32_t offset, uint32_t obj_size);
+        int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+        void (*bandwidth_update)(struct radeon_device *rdev);
 };
 
 union radeon_asic_config {
@@ -566,6 +631,10 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
 int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
                               struct drm_file *filp);
 int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+                                struct drm_file *filp);
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+                                struct drm_file *filp);
 
 
 /*
@@ -594,8 +663,8 @@ struct radeon_device {
         struct radeon_object            *fbdev_robj;
         struct radeon_framebuffer       *fbdev_rfb;
         /* Register mmio */
-        unsigned long                   rmmio_base;
-        unsigned long                   rmmio_size;
+        resource_size_t                 rmmio_base;
+        resource_size_t                 rmmio_size;
         void                            *rmmio;
         radeon_rreg_t                   mm_rreg;
         radeon_wreg_t                   mm_wreg;
@@ -619,11 +688,14 @@ struct radeon_device {
         struct radeon_irq               irq;
         struct radeon_asic              *asic;
         struct radeon_gem               gem;
+        struct radeon_pm                pm;
         struct mutex                    cs_mutex;
         struct radeon_wb                wb;
         bool                            gpu_lockup;
         bool                            shutdown;
         bool                            suspend;
+        bool                            need_dma32;
+        struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
 };
 
 int radeon_device_init(struct radeon_device *rdev,
@@ -670,6 +742,8 @@ void r100_pll_errata_after_index(struct radeon_device *rdev);
 /*
  * ASICs helpers.
  */
+#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \
+                            (rdev->pdev->device == 0x5969))
 #define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
                 (rdev->family == CHIP_RV200) || \
                 (rdev->family == CHIP_RS100) || \
@@ -796,5 +870,8 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
 #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
 #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
+#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
+#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index e2e567395df8..9a75876e0c3b 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -71,6 +71,11 @@ int r100_copy_blit(struct radeon_device *rdev,
                    uint64_t dst_offset,
                    unsigned num_pages,
                    struct radeon_fence *fence);
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+                         uint32_t tiling_flags, uint32_t pitch,
+                         uint32_t offset, uint32_t obj_size);
+int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_bandwidth_update(struct radeon_device *rdev);
 
 static struct radeon_asic r100_asic = {
         .init = &r100_init,
@@ -100,6 +105,9 @@ static struct radeon_asic r100_asic = {
         .set_memory_clock = NULL,
         .set_pcie_lanes = NULL,
         .set_clock_gating = &radeon_legacy_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -128,6 +136,7 @@ int r300_copy_dma(struct radeon_device *rdev,
                   uint64_t dst_offset,
                   unsigned num_pages,
                   struct radeon_fence *fence);
+
 static struct radeon_asic r300_asic = {
         .init = &r300_init,
         .errata = &r300_errata,
@@ -156,6 +165,9 @@ static struct radeon_asic r300_asic = {
         .set_memory_clock = NULL,
         .set_pcie_lanes = &rv370_set_pcie_lanes,
         .set_clock_gating = &radeon_legacy_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &r100_bandwidth_update,
 };
 
 /*
@@ -193,6 +205,9 @@ static struct radeon_asic r420_asic = {
         .set_memory_clock = &radeon_atom_set_memory_clock,
         .set_pcie_lanes = &rv370_set_pcie_lanes,
         .set_clock_gating = &radeon_atom_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -237,6 +252,9 @@ static struct radeon_asic rs400_asic = {
         .set_memory_clock = NULL,
         .set_pcie_lanes = NULL,
         .set_clock_gating = &radeon_legacy_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -254,6 +272,7 @@ void rs600_gart_tlb_flush(struct radeon_device *rdev);
 int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs600_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs600_asic = {
         .init = &r300_init,
         .errata = &rs600_errata,
@@ -282,6 +301,7 @@ static struct radeon_asic rs600_asic = {
         .set_memory_clock = &radeon_atom_set_memory_clock,
         .set_pcie_lanes = NULL,
         .set_clock_gating = &radeon_atom_set_clock_gating,
+        .bandwidth_update = &rs600_bandwidth_update,
 };
 
 
@@ -294,6 +314,7 @@ int rs690_mc_init(struct radeon_device *rdev);
 void rs690_mc_fini(struct radeon_device *rdev);
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs690_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs690_asic = {
         .init = &r300_init,
         .errata = &rs690_errata,
@@ -322,6 +343,9 @@ static struct radeon_asic rs690_asic = {
         .set_memory_clock = &radeon_atom_set_memory_clock,
         .set_pcie_lanes = NULL,
         .set_clock_gating = &radeon_atom_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &rs690_bandwidth_update,
 };
 
 
@@ -339,6 +363,7 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
         .init = &rv515_init,
         .errata = &rv515_errata,
@@ -367,6 +392,9 @@ static struct radeon_asic rv515_asic = {
         .set_memory_clock = &radeon_atom_set_memory_clock,
         .set_pcie_lanes = &rv370_set_pcie_lanes,
         .set_clock_gating = &radeon_atom_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &rv515_bandwidth_update,
 };
 
 
@@ -377,6 +405,7 @@ void r520_errata(struct radeon_device *rdev);
 void r520_vram_info(struct radeon_device *rdev);
 int r520_mc_init(struct radeon_device *rdev);
 void r520_mc_fini(struct radeon_device *rdev);
+void r520_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
         .init = &rv515_init,
         .errata = &r520_errata,
@@ -405,6 +434,9 @@ static struct radeon_asic r520_asic = {
         .set_memory_clock = &radeon_atom_set_memory_clock,
         .set_pcie_lanes = &rv370_set_pcie_lanes,
         .set_clock_gating = &radeon_atom_set_clock_gating,
+        .set_surface_reg = r100_set_surface_reg,
+        .clear_surface_reg = r100_clear_surface_reg,
+        .bandwidth_update = &r520_bandwidth_update,
 };
 
 /*
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 1f5a1a490984..fcfe5c02d744 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -103,7 +103,8 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_gpio(struct drm_device
 static bool radeon_atom_apply_quirks(struct drm_device *dev,
                                      uint32_t supported_device,
                                      int *connector_type,
-                                     struct radeon_i2c_bus_rec *i2c_bus)
+                                     struct radeon_i2c_bus_rec *i2c_bus,
+                                     uint8_t *line_mux)
 {
 
         /* Asus M2A-VM HDMI board lists the DVI port as HDMI */
@@ -127,8 +128,10 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
         if ((dev->pdev->device == 0x5653) &&
             (dev->pdev->subsystem_vendor == 0x1462) &&
             (dev->pdev->subsystem_device == 0x0291)) {
-                if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+                if (*connector_type == DRM_MODE_CONNECTOR_LVDS) {
                         i2c_bus->valid = false;
+                        *line_mux = 53;
+                }
         }
 
         /* Funky macbooks */
@@ -526,7 +529,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 
                 if (!radeon_atom_apply_quirks
                     (dev, (1 << i), &bios_connectors[i].connector_type,
-                     &bios_connectors[i].ddc_bus))
+                     &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux))
                         continue;
 
                 bios_connectors[i].valid = true;
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index c44403a2ca76..2e938f7496fb 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
                 if (r) {
                         goto out_cleanup;
                 }
-                r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+                r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
                 if (r) {
                         goto out_cleanup;
                 }
@@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
                 if (r) {
                         goto out_cleanup;
                 }
-                r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+                r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
                 if (r) {
                         goto out_cleanup;
                 }
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index b843f9bdfb14..a169067efc4e 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -127,17 +127,23 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
                                        sizeof(struct drm_radeon_cs_chunk))) {
                         return -EFAULT;
                 }
+                p->chunks[i].length_dw = user_chunk.length_dw;
+                p->chunks[i].kdata = NULL;
                 p->chunks[i].chunk_id = user_chunk.chunk_id;
+
                 if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
                         p->chunk_relocs_idx = i;
                 }
                 if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
                         p->chunk_ib_idx = i;
+                        /* zero length IB isn't useful */
+                        if (p->chunks[i].length_dw == 0)
+                                return -EINVAL;
                 }
+
                 p->chunks[i].length_dw = user_chunk.length_dw;
                 cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
 
-                p->chunks[i].kdata = NULL;
                 size = p->chunks[i].length_dw * sizeof(uint32_t);
                 p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
                 if (p->chunks[i].kdata == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 5232441f119b..b13c79e38bc0 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -111,9 +111,11 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj,
 
         if (ASIC_IS_AVIVO(rdev))
                 WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
-        else
+        else {
+                radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
                 /* offset is from DISP(2)_BASE_ADDRESS */
-                WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+                WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
+        }
 }
 
 int radeon_crtc_cursor_set(struct drm_crtc *crtc,
@@ -245,6 +247,9 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
                        (RADEON_CUR_LOCK
                         | ((xorigin ? 0 : x) << 16)
                         | (yorigin ? 0 : y)));
+                /* offset is from DISP(2)_BASE_ADDRESS */
+                WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
+                                                                      (yorigin * 256)));
         }
         radeon_lock_cursor(crtc, false);
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f97563db4e59..a162ade74b7f 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -48,6 +48,8 @@ static void radeon_surface_init(struct radeon_device *rdev)
                                i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
                                0);
                 }
+                /* enable surfaces */
+                WREG32(RADEON_SURFACE_CNTL, 0);
         }
 }
 
@@ -119,7 +121,7 @@ int radeon_mc_setup(struct radeon_device *rdev)
         if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
                 /* vram location was already setup try to put gtt after
                  * if it fits */
-                tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+                tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
                 tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
                 if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
                         rdev->mc.gtt_location = tmp;
@@ -134,13 +136,13 @@ int radeon_mc_setup(struct radeon_device *rdev)
         } else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
                 /* gtt location was already setup try to put vram before
                  * if it fits */
-                if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+                if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) {
                         rdev->mc.vram_location = 0;
                 } else {
                         tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
-                        tmp += (rdev->mc.vram_size - 1);
-                        tmp &= ~(rdev->mc.vram_size - 1);
-                        if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+                        tmp += (rdev->mc.mc_vram_size - 1);
+                        tmp &= ~(rdev->mc.mc_vram_size - 1);
+                        if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) {
                                 rdev->mc.vram_location = tmp;
                         } else {
                                 printk(KERN_ERR "[drm] vram too big to fit "
@@ -150,12 +152,14 @@ int radeon_mc_setup(struct radeon_device *rdev)
                 }
         } else {
                 rdev->mc.vram_location = 0;
-                rdev->mc.gtt_location = rdev->mc.vram_size;
+                rdev->mc.gtt_location = rdev->mc.mc_vram_size;
         }
-        DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+        DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
         DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
                  rdev->mc.vram_location,
-                 rdev->mc.vram_location + rdev->mc.vram_size - 1);
+                 rdev->mc.vram_location + rdev->mc.mc_vram_size - 1);
+        if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size)
+                DRM_INFO("radeon: VRAM less than aperture workaround enabled\n");
         DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
         DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
                  rdev->mc.gtt_location,
@@ -450,6 +454,7 @@ int radeon_device_init(struct radeon_device *rdev,
                        uint32_t flags)
 {
         int r, ret;
+        int dma_bits;
 
         DRM_INFO("radeon: Initializing kernel modesetting.\n");
         rdev->shutdown = false;
@@ -492,8 +497,20 @@ int radeon_device_init(struct radeon_device *rdev,
                 return r;
         }
 
-        /* Report DMA addressing limitation */
-        r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+        /* set DMA mask + need_dma32 flags.
+         * PCIE - can handle 40-bits.
+         * IGP - can handle 40-bits (in theory)
+         * AGP - generally dma32 is safest
+         * PCI - only dma32
+         */
+        rdev->need_dma32 = false;
+        if (rdev->flags & RADEON_IS_AGP)
+                rdev->need_dma32 = true;
+        if (rdev->flags & RADEON_IS_PCI)
+                rdev->need_dma32 = true;
+
+        dma_bits = rdev->need_dma32 ? 32 : 40;
+        r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
         if (r) {
                 printk(KERN_WARNING "radeon: No suitable DMA available.\n");
         }
@@ -546,27 +563,22 @@ int radeon_device_init(struct radeon_device *rdev,
                         radeon_combios_asic_init(rdev->ddev);
                 }
         }
+        /* Initialize clocks */
+        r = radeon_clocks_init(rdev);
+        if (r) {
+                return r;
+        }
         /* Get vram informations */
         radeon_vram_info(rdev);
-        /* Device is severly broken if aper size > vram size.
-         * for RN50/M6/M7 - Novell bug 204882 ?
-         */
-        if (rdev->mc.vram_size < rdev->mc.aper_size) {
-                rdev->mc.aper_size = rdev->mc.vram_size;
-        }
+
         /* Add an MTRR for the VRAM */
         rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
                                       MTRR_TYPE_WRCOMB, 1);
         DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
-                 rdev->mc.vram_size >> 20,
+                 rdev->mc.real_vram_size >> 20,
                  (unsigned)rdev->mc.aper_size >> 20);
         DRM_INFO("RAM width %dbits %cDR\n",
                  rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
-        /* Initialize clocks */
-        r = radeon_clocks_init(rdev);
-        if (r) {
-                return r;
-        }
         /* Initialize memory controller (also test AGP) */
         r = radeon_mc_init(rdev);
         if (r) {
@@ -626,6 +638,9 @@ int radeon_device_init(struct radeon_device *rdev,
         if (!ret) {
                 DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
         }
+        if (radeon_testing) {
+                radeon_test_moves(rdev);
+        }
         if (radeon_benchmarking) {
                 radeon_benchmark(rdev);
         }
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 3efcf1a526be..a8fa1bb84cf7 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -187,6 +187,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index)
 
         drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
         radeon_crtc->crtc_id = index;
+        rdev->mode_info.crtcs[index] = radeon_crtc;
 
         radeon_crtc->mode_set.crtc = &radeon_crtc->base;
         radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
@@ -491,7 +492,11 @@ void radeon_compute_pll(struct radeon_pll *pll,
                                         tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
                                         current_freq = radeon_div(tmp, ref_div * post_div);
 
-                                        error = abs(current_freq - freq);
+                                        if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+                                                error = freq - current_freq;
+                                                error = error < 0 ? 0xffffffff : error;
+                                        } else
+                                                error = abs(current_freq - freq);
                                         vco_diff = abs(vco - best_vco);
 
                                         if ((best_vco == 0 && error < best_error) ||
@@ -657,36 +662,51 @@ void radeon_modeset_fini(struct radeon_device *rdev)
         }
 }
 
-void radeon_init_disp_bandwidth(struct drm_device *dev)
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+                                struct drm_display_mode *mode,
+                                struct drm_display_mode *adjusted_mode)
 {
-        struct radeon_device *rdev = dev->dev_private;
-        struct drm_display_mode *modes[2];
-        int pixel_bytes[2];
-        struct drm_crtc *crtc;
-
-        pixel_bytes[0] = pixel_bytes[1] = 0;
-        modes[0] = modes[1] = NULL;
-
-        list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-                struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        struct drm_device *dev = crtc->dev;
+        struct drm_encoder *encoder;
+        struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        struct radeon_encoder *radeon_encoder;
+        bool first = true;
 
-                if (crtc->enabled && crtc->fb) {
-                        modes[radeon_crtc->crtc_id] = &crtc->mode;
-                        pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+        list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+                radeon_encoder = to_radeon_encoder(encoder);
+                if (encoder->crtc != crtc)
+                        continue;
+                if (first) {
+                        radeon_crtc->rmx_type = radeon_encoder->rmx_type;
+                        radeon_crtc->devices = radeon_encoder->devices;
+                        memcpy(&radeon_crtc->native_mode,
+                                &radeon_encoder->native_mode,
+                                sizeof(struct radeon_native_mode));
+                        first = false;
+                } else {
+                        if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
+                                /* WARNING: Right now this can't happen but
+                                 * in the future we need to check that scaling
+                                 * are consistent accross different encoder
+                                 * (ie all encoder can work with the same
+                                 *  scaling).
+                                 */
+                                DRM_ERROR("Scaling not consistent accross encoder.\n");
+                                return false;
+                        }
                 }
         }
-
-        if (ASIC_IS_AVIVO(rdev)) {
-                radeon_init_disp_bw_avivo(dev,
-                                          modes[0],
-                                          pixel_bytes[0],
-                                          modes[1],
-                                          pixel_bytes[1]);
+        if (radeon_crtc->rmx_type != RMX_OFF) {
+                fixed20_12 a, b;
+                a.full = rfixed_const(crtc->mode.vdisplay);
+                b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+                radeon_crtc->vsc.full = rfixed_div(a, b);
+                a.full = rfixed_const(crtc->mode.hdisplay);
+                b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+                radeon_crtc->hsc.full = rfixed_div(a, b);
         } else {
-                radeon_init_disp_bw_legacy(dev,
-                                           modes[0],
-                                           pixel_bytes[0],
-                                           modes[1],
-                                           pixel_bytes[1]);
+                radeon_crtc->vsc.full = rfixed_const(1);
+                radeon_crtc->hsc.full = rfixed_const(1);
         }
+        return true;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 84ba69f48784..3cfcee17dc56 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -89,6 +89,7 @@ int radeon_agpmode = 0;
 int radeon_vram_limit = 0;
 int radeon_gart_size = 512; /* default gart size */
 int radeon_benchmarking = 0;
+int radeon_testing = 0;
 int radeon_connector_table = 0;
 #endif
 
@@ -117,6 +118,9 @@ module_param_named(gartsize, radeon_gart_size, int, 0600);
 MODULE_PARM_DESC(benchmark, "Run benchmark");
 module_param_named(benchmark, radeon_benchmarking, int, 0444);
 
+MODULE_PARM_DESC(test, "Run tests");
+module_param_named(test, radeon_testing, int, 0444);
+
 MODULE_PARM_DESC(connector_table, "Force connector table");
 module_param_named(connector_table, radeon_connector_table, int, 0444);
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index c8ef0d14ffab..0a92706eac19 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -154,7 +154,6 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
 
         if (mode->hdisplay < native_mode->panel_xres ||
             mode->vdisplay < native_mode->panel_yres) {
-                radeon_encoder->flags |= RADEON_USE_RMX;
                 if (ASIC_IS_AVIVO(rdev)) {
                         adjusted_mode->hdisplay = native_mode->panel_xres;
                         adjusted_mode->vdisplay = native_mode->panel_yres;
@@ -197,15 +196,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
         }
 }
 
+
 static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
                                    struct drm_display_mode *mode,
                                    struct drm_display_mode *adjusted_mode)
 {
-
         struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 
-        radeon_encoder->flags &= ~RADEON_USE_RMX;
-
         drm_mode_set_crtcinfo(adjusted_mode, 0);
 
         if (radeon_encoder->rmx_type != RMX_OFF)
@@ -808,234 +805,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action)
 
 }
 
-static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
-{
-
-        WREG32(0x659C, 0x0);
-        WREG32(0x6594, 0x705);
-        WREG32(0x65A4, 0x10001);
-        WREG32(0x65D8, 0x0);
-        WREG32(0x65B0, 0x0);
-        WREG32(0x65C0, 0x0);
-        WREG32(0x65D4, 0x0);
-        WREG32(0x6578, 0x0);
-        WREG32(0x657C, 0x841880A8);
-        WREG32(0x6578, 0x1);
-        WREG32(0x657C, 0x84208680);
-        WREG32(0x6578, 0x2);
-        WREG32(0x657C, 0xBFF880B0);
-        WREG32(0x6578, 0x100);
-        WREG32(0x657C, 0x83D88088);
-        WREG32(0x6578, 0x101);
-        WREG32(0x657C, 0x84608680);
-        WREG32(0x6578, 0x102);
-        WREG32(0x657C, 0xBFF080D0);
-        WREG32(0x6578, 0x200);
-        WREG32(0x657C, 0x83988068);
-        WREG32(0x6578, 0x201);
-        WREG32(0x657C, 0x84A08680);
-        WREG32(0x6578, 0x202);
-        WREG32(0x657C, 0xBFF080F8);
-        WREG32(0x6578, 0x300);
-        WREG32(0x657C, 0x83588058);
-        WREG32(0x6578, 0x301);
-        WREG32(0x657C, 0x84E08660);
-        WREG32(0x6578, 0x302);
-        WREG32(0x657C, 0xBFF88120);
-        WREG32(0x6578, 0x400);
-        WREG32(0x657C, 0x83188040);
-        WREG32(0x6578, 0x401);
-        WREG32(0x657C, 0x85008660);
-        WREG32(0x6578, 0x402);
-        WREG32(0x657C, 0xBFF88150);
-        WREG32(0x6578, 0x500);
-        WREG32(0x657C, 0x82D88030);
-        WREG32(0x6578, 0x501);
-        WREG32(0x657C, 0x85408640);
-        WREG32(0x6578, 0x502);
-        WREG32(0x657C, 0xBFF88180);
-        WREG32(0x6578, 0x600);
-        WREG32(0x657C, 0x82A08018);
-        WREG32(0x6578, 0x601);
-        WREG32(0x657C, 0x85808620);
-        WREG32(0x6578, 0x602);
-        WREG32(0x657C, 0xBFF081B8);
-        WREG32(0x6578, 0x700);
-        WREG32(0x657C, 0x82608010);
-        WREG32(0x6578, 0x701);
-        WREG32(0x657C, 0x85A08600);
-        WREG32(0x6578, 0x702);
-        WREG32(0x657C, 0x800081F0);
-        WREG32(0x6578, 0x800);
-        WREG32(0x657C, 0x8228BFF8);
-        WREG32(0x6578, 0x801);
-        WREG32(0x657C, 0x85E085E0);
-        WREG32(0x6578, 0x802);
-        WREG32(0x657C, 0xBFF88228);
-        WREG32(0x6578, 0x10000);
-        WREG32(0x657C, 0x82A8BF00);
-        WREG32(0x6578, 0x10001);
-        WREG32(0x657C, 0x82A08CC0);
-        WREG32(0x6578, 0x10002);
-        WREG32(0x657C, 0x8008BEF8);
-        WREG32(0x6578, 0x10100);
-        WREG32(0x657C, 0x81F0BF28);
-        WREG32(0x6578, 0x10101);
-        WREG32(0x657C, 0x83608CA0);
-        WREG32(0x6578, 0x10102);
-        WREG32(0x657C, 0x8018BED0);
-        WREG32(0x6578, 0x10200);
-        WREG32(0x657C, 0x8148BF38);
-        WREG32(0x6578, 0x10201);
-        WREG32(0x657C, 0x84408C80);
-        WREG32(0x6578, 0x10202);
-        WREG32(0x657C, 0x8008BEB8);
-        WREG32(0x6578, 0x10300);
-        WREG32(0x657C, 0x80B0BF78);
-        WREG32(0x6578, 0x10301);
-        WREG32(0x657C, 0x85008C20);
-        WREG32(0x6578, 0x10302);
-        WREG32(0x657C, 0x8020BEA0);
-        WREG32(0x6578, 0x10400);
-        WREG32(0x657C, 0x8028BF90);
-        WREG32(0x6578, 0x10401);
-        WREG32(0x657C, 0x85E08BC0);
-        WREG32(0x6578, 0x10402);
-        WREG32(0x657C, 0x8018BE90);
-        WREG32(0x6578, 0x10500);
-        WREG32(0x657C, 0xBFB8BFB0);
-        WREG32(0x6578, 0x10501);
-        WREG32(0x657C, 0x86C08B40);
-        WREG32(0x6578, 0x10502);
-        WREG32(0x657C, 0x8010BE90);
-        WREG32(0x6578, 0x10600);
-        WREG32(0x657C, 0xBF58BFC8);
-        WREG32(0x6578, 0x10601);
-        WREG32(0x657C, 0x87A08AA0);
-        WREG32(0x6578, 0x10602);
-        WREG32(0x657C, 0x8010BE98);
-        WREG32(0x6578, 0x10700);
-        WREG32(0x657C, 0xBF10BFF0);
-        WREG32(0x6578, 0x10701);
-        WREG32(0x657C, 0x886089E0);
-        WREG32(0x6578, 0x10702);
-        WREG32(0x657C, 0x8018BEB0);
-        WREG32(0x6578, 0x10800);
-        WREG32(0x657C, 0xBED8BFE8);
-        WREG32(0x6578, 0x10801);
-        WREG32(0x657C, 0x89408940);
-        WREG32(0x6578, 0x10802);
-        WREG32(0x657C, 0xBFE8BED8);
-        WREG32(0x6578, 0x20000);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20001);
-        WREG32(0x657C, 0x90008000);
-        WREG32(0x6578, 0x20002);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20003);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20100);
-        WREG32(0x657C, 0x80108000);
-        WREG32(0x6578, 0x20101);
-        WREG32(0x657C, 0x8FE0BF70);
-        WREG32(0x6578, 0x20102);
-        WREG32(0x657C, 0xBFE880C0);
-        WREG32(0x6578, 0x20103);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20200);
-        WREG32(0x657C, 0x8018BFF8);
-        WREG32(0x6578, 0x20201);
-        WREG32(0x657C, 0x8F80BF08);
-        WREG32(0x6578, 0x20202);
-        WREG32(0x657C, 0xBFD081A0);
-        WREG32(0x6578, 0x20203);
-        WREG32(0x657C, 0xBFF88000);
-        WREG32(0x6578, 0x20300);
-        WREG32(0x657C, 0x80188000);
-        WREG32(0x6578, 0x20301);
-        WREG32(0x657C, 0x8EE0BEC0);
-        WREG32(0x6578, 0x20302);
-        WREG32(0x657C, 0xBFB082A0);
-        WREG32(0x6578, 0x20303);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20400);
-        WREG32(0x657C, 0x80188000);
-        WREG32(0x6578, 0x20401);
-        WREG32(0x657C, 0x8E00BEA0);
-        WREG32(0x6578, 0x20402);
-        WREG32(0x657C, 0xBF8883C0);
-        WREG32(0x6578, 0x20403);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x20500);
-        WREG32(0x657C, 0x80188000);
-        WREG32(0x6578, 0x20501);
-        WREG32(0x657C, 0x8D00BE90);
-        WREG32(0x6578, 0x20502);
-        WREG32(0x657C, 0xBF588500);
-        WREG32(0x6578, 0x20503);
-        WREG32(0x657C, 0x80008008);
-        WREG32(0x6578, 0x20600);
-        WREG32(0x657C, 0x80188000);
-        WREG32(0x6578, 0x20601);
-        WREG32(0x657C, 0x8BC0BE98);
-        WREG32(0x6578, 0x20602);
-        WREG32(0x657C, 0xBF308660);
-        WREG32(0x6578, 0x20603);
-        WREG32(0x657C, 0x80008008);
-        WREG32(0x6578, 0x20700);
-        WREG32(0x657C, 0x80108000);
-        WREG32(0x6578, 0x20701);
-        WREG32(0x657C, 0x8A80BEB0);
-        WREG32(0x6578, 0x20702);
-        WREG32(0x657C, 0xBF0087C0);
-        WREG32(0x6578, 0x20703);
-        WREG32(0x657C, 0x80008008);
-        WREG32(0x6578, 0x20800);
-        WREG32(0x657C, 0x80108000);
-        WREG32(0x6578, 0x20801);
-        WREG32(0x657C, 0x8920BED0);
-        WREG32(0x6578, 0x20802);
-        WREG32(0x657C, 0xBED08920);
-        WREG32(0x6578, 0x20803);
-        WREG32(0x657C, 0x80008010);
-        WREG32(0x6578, 0x30000);
-        WREG32(0x657C, 0x90008000);
-        WREG32(0x6578, 0x30001);
-        WREG32(0x657C, 0x80008000);
-        WREG32(0x6578, 0x30100);
-        WREG32(0x657C, 0x8FE0BF90);
-        WREG32(0x6578, 0x30101);
-        WREG32(0x657C, 0xBFF880A0);
-        WREG32(0x6578, 0x30200);
-        WREG32(0x657C, 0x8F60BF40);
-        WREG32(0x6578, 0x30201);
-        WREG32(0x657C, 0xBFE88180);
-        WREG32(0x6578, 0x30300);
-        WREG32(0x657C, 0x8EC0BF00);
-        WREG32(0x6578, 0x30301);
-        WREG32(0x657C, 0xBFC88280);
-        WREG32(0x6578, 0x30400);
-        WREG32(0x657C, 0x8DE0BEE0);
-        WREG32(0x6578, 0x30401);
-        WREG32(0x657C, 0xBFA083A0);
-        WREG32(0x6578, 0x30500);
-        WREG32(0x657C, 0x8CE0BED0);
-        WREG32(0x6578, 0x30501);
-        WREG32(0x657C, 0xBF7884E0);
-        WREG32(0x6578, 0x30600);
-        WREG32(0x657C, 0x8BA0BED8);
-        WREG32(0x6578, 0x30601);
-        WREG32(0x657C, 0xBF508640);
-        WREG32(0x6578, 0x30700);
-        WREG32(0x657C, 0x8A60BEE8);
-        WREG32(0x6578, 0x30701);
-        WREG32(0x657C, 0xBF2087A0);
-        WREG32(0x6578, 0x30800);
-        WREG32(0x657C, 0x8900BF00);
-        WREG32(0x6578, 0x30801);
-        WREG32(0x657C, 0xBF008900);
-}
-
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1074,129 +843,6 @@ atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 }
 
 static void
-atombios_overscan_setup(struct drm_encoder *encoder,
-                        struct drm_display_mode *mode,
-                        struct drm_display_mode *adjusted_mode)
-{
-        struct drm_device *dev = encoder->dev;
-        struct radeon_device *rdev = dev->dev_private;
-        struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-        struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-        SET_CRTC_OVERSCAN_PS_ALLOCATION args;
-        int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
-
-        memset(&args, 0, sizeof(args));
-
-        args.usOverscanRight = 0;
-        args.usOverscanLeft = 0;
-        args.usOverscanBottom = 0;
-        args.usOverscanTop = 0;
-        args.ucCRTC = radeon_crtc->crtc_id;
-
-        if (radeon_encoder->flags & RADEON_USE_RMX) {
-                if (radeon_encoder->rmx_type == RMX_FULL) {
-                        args.usOverscanRight = 0;
-                        args.usOverscanLeft = 0;
-                        args.usOverscanBottom = 0;
-                        args.usOverscanTop = 0;
-                } else if (radeon_encoder->rmx_type == RMX_CENTER) {
-                        args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-                        args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-                        args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-                        args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-                } else if (radeon_encoder->rmx_type == RMX_ASPECT) {
-                        int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
-                        int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
-
-                        if (a1 > a2) {
-                                args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-                                args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-                        } else if (a2 > a1) {
-                                args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-                                args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-                        }
-                }
-        }
-
-        atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_scaler_setup(struct drm_encoder *encoder)
-{
-        struct drm_device *dev = encoder->dev;
-        struct radeon_device *rdev = dev->dev_private;
-        struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-        struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-        ENABLE_SCALER_PS_ALLOCATION args;
-        int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
-        /* fixme - fill in enc_priv for atom dac */
-        enum radeon_tv_std tv_std = TV_STD_NTSC;
-
-        if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
-                return;
-
-        memset(&args, 0, sizeof(args));
-
-        args.ucScaler = radeon_crtc->crtc_id;
-
-        if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
-                switch (tv_std) {
-                case TV_STD_NTSC:
-                default:
-                        args.ucTVStandard = ATOM_TV_NTSC;
-                        break;
-                case TV_STD_PAL:
-                        args.ucTVStandard = ATOM_TV_PAL;
-                        break;
-                case TV_STD_PAL_M:
-                        args.ucTVStandard = ATOM_TV_PALM;
-                        break;
-                case TV_STD_PAL_60:
-                        args.ucTVStandard = ATOM_TV_PAL60;
-                        break;
-                case TV_STD_NTSC_J:
-                        args.ucTVStandard = ATOM_TV_NTSCJ;
-                        break;
-                case TV_STD_SCART_PAL:
-                        args.ucTVStandard = ATOM_TV_PAL; /* ??? */
-                        break;
-                case TV_STD_SECAM:
-                        args.ucTVStandard = ATOM_TV_SECAM;
-                        break;
-                case TV_STD_PAL_CN:
-                        args.ucTVStandard = ATOM_TV_PALCN;
-                        break;
-                }
-                args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-        } else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
-                args.ucTVStandard = ATOM_TV_CV;
-                args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-        } else if (radeon_encoder->flags & RADEON_USE_RMX) {
-                if (radeon_encoder->rmx_type == RMX_FULL)
-                        args.ucEnable = ATOM_SCALER_EXPANSION;
-                else if (radeon_encoder->rmx_type == RMX_CENTER)
-                        args.ucEnable = ATOM_SCALER_CENTER;
-                else if (radeon_encoder->rmx_type == RMX_ASPECT)
-                        args.ucEnable = ATOM_SCALER_EXPANSION;
-        } else {
-                if (ASIC_IS_AVIVO(rdev))
-                        args.ucEnable = ATOM_SCALER_DISABLE;
-                else
-                        args.ucEnable = ATOM_SCALER_CENTER;
-        }
-
-        atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-        if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
-            && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
-                atom_rv515_force_tv_scaler(rdev);
-        }
-
-}
-
-static void
 radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
         struct drm_device *dev = encoder->dev;
@@ -1448,8 +1094,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
         radeon_encoder->pixel_clock = adjusted_mode->clock;
 
         radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
-        atombios_overscan_setup(encoder, mode, adjusted_mode);
-        atombios_scaler_setup(encoder);
         atombios_set_encoder_crtc_source(encoder);
 
         if (ASIC_IS_AVIVO(rdev)) {
@@ -1667,6 +1311,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 
         radeon_encoder->encoder_id = encoder_id;
         radeon_encoder->devices = supported_device;
+        radeon_encoder->rmx_type = RMX_OFF;
 
         switch (radeon_encoder->encoder_id) {
         case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 9e8f191eb64a..3206c0ad7b6c 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -101,9 +101,10 @@ static int radeonfb_setcolreg(unsigned regno,
                                 break;
                         case 24:
                         case 32:
-                                fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
-                                        (green & 0xff00) |
-                                        ((blue  & 0xff00) >> 8);
+                                fb->pseudo_palette[regno] =
+                                        (((red >> 8) & 0xff) << info->var.red.offset) |
+                                        (((green >> 8) & 0xff) << info->var.green.offset) |
+                                        (((blue >> 8) & 0xff) << info->var.blue.offset);
                                 break;
                         }
                 }
@@ -154,6 +155,7 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
                 var->transp.length = 0;
                 var->transp.offset = 0;
                 break;
+#ifdef __LITTLE_ENDIAN
         case 15:
                 var->red.offset = 10;
                 var->green.offset = 5;
@@ -194,6 +196,28 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
                 var->transp.length = 8;
                 var->transp.offset = 24;
                 break;
+#else
+        case 24:
+                var->red.offset = 8;
+                var->green.offset = 16;
+                var->blue.offset = 24;
+                var->red.length = 8;
+                var->green.length = 8;
+                var->blue.length = 8;
+                var->transp.length = 0;
+                var->transp.offset = 0;
+                break;
+        case 32:
+                var->red.offset = 8;
+                var->green.offset = 16;
+                var->blue.offset = 24;
+                var->red.length = 8;
+                var->green.length = 8;
+                var->blue.length = 8;
+                var->transp.length = 8;
+                var->transp.offset = 0;
+                break;
+#endif
         default:
                 return -EINVAL;
         }
@@ -447,10 +471,10 @@ static struct notifier_block paniced = {
         .notifier_call = radeonfb_panic,
 };
 
-static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled)
 {
         int aligned = width;
-        int align_large = (ASIC_IS_AVIVO(rdev));
+        int align_large = (ASIC_IS_AVIVO(rdev)) || tiled;
         int pitch_mask = 0;
 
         switch (bpp / 8) {
@@ -488,12 +512,13 @@ int radeonfb_create(struct radeon_device *rdev,
         u64 fb_gpuaddr;
         void *fbptr = NULL;
         unsigned long tmp;
+        bool fb_tiled = false; /* useful for testing */
 
         mode_cmd.width = surface_width;
         mode_cmd.height = surface_height;
         mode_cmd.bpp = 32;
         /* need to align pitch with crtc limits */
-        mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+        mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
         mode_cmd.depth = 24;
 
         size = mode_cmd.pitch * mode_cmd.height;
@@ -511,6 +536,8 @@ int radeonfb_create(struct radeon_device *rdev,
         }
         robj = gobj->driver_private;
 
+        if (fb_tiled)
+                radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch);
         mutex_lock(&rdev->ddev->struct_mutex);
         fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
         if (fb == NULL) {
@@ -539,6 +566,9 @@ int radeonfb_create(struct radeon_device *rdev,
         }
         rfbdev = info->par;
 
+        if (fb_tiled)
+                radeon_object_check_tiling(robj, 0, 0);
+
         ret = radeon_object_kmap(robj, &fbptr);
         if (ret) {
                 goto out_unref;
@@ -572,6 +602,11 @@ int radeonfb_create(struct radeon_device *rdev,
         info->var.width = -1;
         info->var.xres = fb_width;
         info->var.yres = fb_height;
+
+        /* setup aperture base/size for vesafb takeover */
+        info->aperture_base = rdev->ddev->mode_config.fb_base;
+        info->aperture_size = rdev->mc.real_vram_size;
+
         info->fix.mmio_start = 0;
         info->fix.mmio_len = 0;
         info->pixmap.size = 64*1024;
@@ -600,6 +635,7 @@ int radeonfb_create(struct radeon_device *rdev,
                 info->var.transp.offset = 0;
                 info->var.transp.length = 0;
                 break;
+#ifdef __LITTLE_ENDIAN
         case 15:
                 info->var.red.offset = 10;
                 info->var.green.offset = 5;
@@ -639,7 +675,29 @@ int radeonfb_create(struct radeon_device *rdev,
                 info->var.transp.offset = 24;
                 info->var.transp.length = 8;
                 break;
+#else
+        case 24:
+                info->var.red.offset = 8;
+                info->var.green.offset = 16;
+                info->var.blue.offset = 24;
+                info->var.red.length = 8;
+                info->var.green.length = 8;
+                info->var.blue.length = 8;
+                info->var.transp.offset = 0;
+                info->var.transp.length = 0;
+                break;
+        case 32:
+                info->var.red.offset = 8;
+                info->var.green.offset = 16;
+                info->var.blue.offset = 24;
+                info->var.red.length = 8;
+                info->var.green.length = 8;
+                info->var.blue.length = 8;
+                info->var.transp.offset = 0;
+                info->var.transp.length = 8;
+                break;
         default:
+#endif
                 break;
         }
 
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 96afbf5ae2ad..b4e48dd2e859 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -195,7 +195,7 @@ retry:
                 r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
                                 radeon_fence_signaled(fence), timeout);
                 if (unlikely(r == -ERESTARTSYS)) {
-                        return -ERESTART;
+                        return -EBUSY;
                 }
         } else {
                 r = wait_event_timeout(rdev->fence_drv.queue,
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index d343a15316ec..2977539880fb 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -177,7 +177,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
                         return -ENOMEM;
                 }
                 rdev->gart.pages[p] = pagelist[i];
-                page_base = (uint32_t)rdev->gart.pages_addr[p];
+                page_base = rdev->gart.pages_addr[p];
                 for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
                         radeon_gart_set_page(rdev, t, page_base);
                         page_base += 4096;
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index eb516034235d..cded5180c752 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -157,9 +157,9 @@ int radeon_gem_info_ioctl(struct drm_device *dev, void *data,
         struct radeon_device *rdev = dev->dev_private;
         struct drm_radeon_gem_info *args = data;
 
-        args->vram_size = rdev->mc.vram_size;
+        args->vram_size = rdev->mc.real_vram_size;
         /* FIXME: report somethings that makes sense */
-        args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+        args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024);
         args->gart_size = rdev->mc.gtt_size;
         return 0;
 }
@@ -285,3 +285,44 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
         mutex_unlock(&dev->struct_mutex);
         return r;
 }
+
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+                                struct drm_file *filp)
+{
+        struct drm_radeon_gem_set_tiling *args = data;
+        struct drm_gem_object *gobj;
+        struct radeon_object *robj;
+        int r = 0;
+
+        DRM_DEBUG("%d \n", args->handle);
+        gobj = drm_gem_object_lookup(dev, filp, args->handle);
+        if (gobj == NULL)
+                return -EINVAL;
+        robj = gobj->driver_private;
+        radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch);
+        mutex_lock(&dev->struct_mutex);
+        drm_gem_object_unreference(gobj);
+        mutex_unlock(&dev->struct_mutex);
+        return r;
+}
+
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+                                struct drm_file *filp)
+{
+        struct drm_radeon_gem_get_tiling *args = data;
+        struct drm_gem_object *gobj;
+        struct radeon_object *robj;
+        int r = 0;
+
+        DRM_DEBUG("\n");
+        gobj = drm_gem_object_lookup(dev, filp, args->handle);
+        if (gobj == NULL)
+                return -EINVAL;
+        robj = gobj->driver_private;
+        radeon_object_get_tiling_flags(robj, &args->tiling_flags,
+                                       &args->pitch);
+        mutex_lock(&dev->struct_mutex);
+        drm_gem_object_unreference(gobj);
+        mutex_unlock(&dev->struct_mutex);
+        return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 4612a7c146d1..937a2f1cdb46 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -291,5 +291,7 @@ struct drm_ioctl_desc radeon_ioctls_kms[] = {
         DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
         DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
         DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+        DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
+        DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
 };
 int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 8086ecf7f03d..7d06dc98a42a 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -29,6 +29,171 @@
 #include "radeon_fixed.h"
 #include "radeon.h"
 
+static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc,
+                                       struct drm_display_mode *mode,
+                                       struct drm_display_mode *adjusted_mode)
+{
+        struct drm_device *dev = crtc->dev;
+        struct radeon_device *rdev = dev->dev_private;
+        struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        int xres = mode->hdisplay;
+        int yres = mode->vdisplay;
+        bool hscale = true, vscale = true;
+        int hsync_wid;
+        int vsync_wid;
+        int hsync_start;
+        int blank_width;
+        u32 scale, inc, crtc_more_cntl;
+        u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
+        u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
+        u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
+        struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+
+        fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+                (RADEON_VERT_STRETCH_RESERVED |
+                 RADEON_VERT_AUTO_RATIO_INC);
+        fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+                (RADEON_HORZ_FP_LOOP_STRETCH |
+                 RADEON_HORZ_AUTO_RATIO_INC);
+
+        crtc_more_cntl = 0;
+        if ((rdev->family == CHIP_RS100) ||
+            (rdev->family == CHIP_RS200)) {
+                /* This is to workaround the asic bug for RMX, some versions
+                   of BIOS dosen't have this register initialized correctly. */
+                crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+        }
+
+
+        fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+                                | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+        hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+        if (!hsync_wid)
+                hsync_wid = 1;
+        hsync_start = mode->crtc_hsync_start - 8;
+
+        fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+                              | ((hsync_wid & 0x3f) << 16)
+                              | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+                                 ? RADEON_CRTC_H_SYNC_POL
+                                 : 0));
+
+        fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+                                | ((mode->crtc_vdisplay - 1) << 16));
+
+        vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+        if (!vsync_wid)
+                vsync_wid = 1;
+
+        fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+                              | ((vsync_wid & 0x1f) << 16)
+                              | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+                                 ? RADEON_CRTC_V_SYNC_POL
+                                 : 0));
+
+        fp_horz_vert_active = 0;
+
+        if (native_mode->panel_xres == 0 ||
+            native_mode->panel_yres == 0) {
+                hscale = false;
+                vscale = false;
+        } else {
+                if (xres > native_mode->panel_xres)
+                        xres = native_mode->panel_xres;
+                if (yres > native_mode->panel_yres)
+                        yres = native_mode->panel_yres;
+
+                if (xres == native_mode->panel_xres)
+                        hscale = false;
+                if (yres == native_mode->panel_yres)
+                        vscale = false;
+        }
+
+        switch (radeon_crtc->rmx_type) {
+        case RMX_FULL:
+        case RMX_ASPECT:
+                if (!hscale)
+                        fp_horz_stretch |= ((xres/8-1) << 16);
+                else {
+                        inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+                        scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+                                / native_mode->panel_xres + 1;
+                        fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+                                        RADEON_HORZ_STRETCH_BLEND |
+                                        RADEON_HORZ_STRETCH_ENABLE |
+                                        ((native_mode->panel_xres/8-1) << 16));
+                }
+
+                if (!vscale)
+                        fp_vert_stretch |= ((yres-1) << 12);
+                else {
+                        inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+                        scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+                                / native_mode->panel_yres + 1;
+                        fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+                                        RADEON_VERT_STRETCH_ENABLE |
+                                        RADEON_VERT_STRETCH_BLEND |
+                                        ((native_mode->panel_yres-1) << 12));
+                }
+                break;
+        case RMX_CENTER:
+                fp_horz_stretch |= ((xres/8-1) << 16);
+                fp_vert_stretch |= ((yres-1) << 12);
+
+                crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+                                RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+                blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+                if (blank_width > 110)
+                        blank_width = 110;
+
+                fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+                                | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+                hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+                if (!hsync_wid)
+                        hsync_wid = 1;
+
+                fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+                                | ((hsync_wid & 0x3f) << 16)
+                                | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+                                        ? RADEON_CRTC_H_SYNC_POL
+                                        : 0));
+
+                fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+                                | ((mode->crtc_vdisplay - 1) << 16));
+
+                vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+                if (!vsync_wid)
+                        vsync_wid = 1;
+
+                fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+                                        | ((vsync_wid & 0x1f) << 16)
+                                        | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+                                                ? RADEON_CRTC_V_SYNC_POL
+                                                : 0)));
+
+                fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+                                (((native_mode->panel_xres / 8) & 0x1ff) << 16));
+                break;
+        case RMX_OFF:
+        default:
+                fp_horz_stretch |= ((xres/8-1) << 16);
+                fp_vert_stretch |= ((yres-1) << 12);
+                break;
+        }
+
+        WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
+        WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
+        WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
+        WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
+        WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
+        WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
+        WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+        WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+}
+
 void radeon_restore_common_regs(struct drm_device *dev)
 {
         /* don't need this yet */
@@ -235,6 +400,7 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
         uint64_t base;
         uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
         uint32_t crtc_pitch, pitch_pixels;
+        uint32_t tiling_flags;
 
         DRM_DEBUG("\n");
 
@@ -244,7 +410,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
         if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
                 return -EINVAL;
         }
-        crtc_offset = (u32)base;
+        /* if scanout was in GTT this really wouldn't work */
+        /* crtc offset is from display base addr not FB location */
+        radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location;
+
+        base -= radeon_crtc->legacy_display_base_addr;
+
         crtc_offset_cntl = 0;
 
         pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
@@ -253,8 +424,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
                        (crtc->fb->bits_per_pixel * 8));
         crtc_pitch |= crtc_pitch << 16;
 
-        /* TODO tiling */
-        if (0) {
+        radeon_object_get_tiling_flags(obj->driver_private,
+                                       &tiling_flags, NULL);
+        if (tiling_flags & RADEON_TILING_MICRO)
+                DRM_ERROR("trying to scanout microtiled buffer\n");
+
+        if (tiling_flags & RADEON_TILING_MACRO) {
                 if (ASIC_IS_R300(rdev))
                         crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
                                              R300_CRTC_MICRO_TILE_BUFFER_DIS |
@@ -270,15 +445,13 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
                         crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
         }
 
-
-        /* TODO more tiling */
-        if (0) {
+        if (tiling_flags & RADEON_TILING_MACRO) {
                 if (ASIC_IS_R300(rdev)) {
                         crtc_tile_x0_y0 = x | (y << 16);
                         base &= ~0x7ff;
                 } else {
                         int byteshift = crtc->fb->bits_per_pixel >> 4;
-                        int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+                        int tile_addr = (((y >> 3) * pitch_pixels +  x) >> (8 - byteshift)) << 11;
                         base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
                         crtc_offset_cntl |= (y % 16);
                 }
@@ -303,11 +476,9 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 
         base &= ~7;
 
-        /* update sarea TODO */
-
         crtc_offset = (u32)base;
 
-        WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+        WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr);
 
         if (ASIC_IS_R300(rdev)) {
                 if (radeon_crtc->crtc_id)
@@ -751,6 +922,8 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc,
                                    struct drm_display_mode *mode,
                                    struct drm_display_mode *adjusted_mode)
 {
+        if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+                return false;
         return true;
 }
 
@@ -759,16 +932,25 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc,
                                  struct drm_display_mode *adjusted_mode,
                                  int x, int y, struct drm_framebuffer *old_fb)
 {
-
-        DRM_DEBUG("\n");
+        struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+        struct drm_device *dev = crtc->dev;
+        struct radeon_device *rdev = dev->dev_private;
 
         /* TODO TV */
-
         radeon_crtc_set_base(crtc, x, y, old_fb);
         radeon_set_crtc_timing(crtc, adjusted_mode);
         radeon_set_pll(crtc, adjusted_mode);
-        radeon_init_disp_bandwidth(crtc->dev);
-
+        radeon_bandwidth_update(rdev);
+        if (radeon_crtc->crtc_id == 0) {
+                radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
+        } else {
+                if (radeon_crtc->rmx_type != RMX_OFF) {
+                        /* FIXME: only first crtc has rmx what should we
+                         * do ?
+                         */
+                        DRM_ERROR("Mode need scaling but only first crtc can do that.\n");
+                }
+        }
         return 0;
 }
 
@@ -799,478 +981,3 @@ void radeon_legacy_init_crtc(struct drm_device *dev,
                 radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
         drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
 }
-
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-                                struct drm_display_mode *mode1,
-                                uint32_t pixel_bytes1,
-                                struct drm_display_mode *mode2,
-                                uint32_t pixel_bytes2)
-{
-        struct radeon_device *rdev = dev->dev_private;
-        fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
-        fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
-        fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
-        uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
-        fixed20_12 memtcas_ff[8] = {
-                fixed_init(1),
-                fixed_init(2),
-                fixed_init(3),
-                fixed_init(0),
-                fixed_init_half(1),
-                fixed_init_half(2),
-                fixed_init(0),
-        };
-        fixed20_12 memtcas_rs480_ff[8] = {
-                fixed_init(0),
-                fixed_init(1),
-                fixed_init(2),
-                fixed_init(3),
-                fixed_init(0),
-                fixed_init_half(1),
-                fixed_init_half(2),
-                fixed_init_half(3),
-        };
-        fixed20_12 memtcas2_ff[8] = {
-                fixed_init(0),
-                fixed_init(1),
-                fixed_init(2),
-                fixed_init(3),
-                fixed_init(4),
-                fixed_init(5),
-                fixed_init(6),
-                fixed_init(7),
-        };
-        fixed20_12 memtrbs[8] = {
-                fixed_init(1),
-                fixed_init_half(1),
-                fixed_init(2),
-                fixed_init_half(2),
-                fixed_init(3),
-                fixed_init_half(3),
-                fixed_init(4),
-                fixed_init_half(4)
-        };
-        fixed20_12 memtrbs_r4xx[8] = {
-                fixed_init(4),
-                fixed_init(5),
-                fixed_init(6),
-                fixed_init(7),
-                fixed_init(8),
-                fixed_init(9),
-                fixed_init(10),
-                fixed_init(11)
-        };
-        fixed20_12 min_mem_eff;
-        fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
-        fixed20_12 cur_latency_mclk, cur_latency_sclk;
-        fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
-                disp_drain_rate2, read_return_rate;
-        fixed20_12 time_disp1_drop_priority;
-        int c;
-        int cur_size = 16;       /* in octawords */
-        int critical_point = 0, critical_point2;
-/*      uint32_t read_return_rate, time_disp1_drop_priority; */
-        int stop_req, max_stop_req;
-
-        min_mem_eff.full = rfixed_const_8(0);
-        /* get modes */
-        if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
-                uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
-                mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
-                mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
-                /* check crtc enables */
-                if (mode2)
-                        mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-                if (mode1)
-                        mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-                WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
-        }
-
-        /*
-         * determine is there is enough bw for current mode
-         */
-        mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-        temp_ff.full = rfixed_const(100);
-        mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-        sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-        sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-        temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-        temp_ff.full = rfixed_const(temp);
-        mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-
-        pix_clk.full = 0;
-        pix_clk2.full = 0;
-        peak_disp_bw.full = 0;
-        if (mode1) {
-                temp_ff.full = rfixed_const(1000);
-                pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
-                pix_clk.full = rfixed_div(pix_clk, temp_ff);
-                temp_ff.full = rfixed_const(pixel_bytes1);
-                peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-        }
-        if (mode2) {
-                temp_ff.full = rfixed_const(1000);
-                pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
-                pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-                temp_ff.full = rfixed_const(pixel_bytes2);
-                peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-        }
-
-        mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-        if (peak_disp_bw.full >= mem_bw.full) {
-                DRM_ERROR("You may not have enough display bandwidth for current mode\n"
-                          "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-        }
-
-        /*  Get values from the EXT_MEM_CNTL register...converting its contents. */
-        temp = RREG32(RADEON_MEM_TIMING_CNTL);
-        if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
-                mem_trcd = ((temp >> 2) & 0x3) + 1;
-                mem_trp  = ((temp & 0x3)) + 1;
-                mem_tras = ((temp & 0x70) >> 4) + 1;
-        } else if (rdev->family == CHIP_R300 ||
-                   rdev->family == CHIP_R350) { /* r300, r350 */
-                mem_trcd = (temp & 0x7) + 1;
-                mem_trp = ((temp >> 8) & 0x7) + 1;
-                mem_tras = ((temp >> 11) & 0xf) + 4;
-        } else if (rdev->family == CHIP_RV350 ||
-                   rdev->family <= CHIP_RV380) {
-                /* rv3x0 */
-                mem_trcd = (temp & 0x7) + 3;
-                mem_trp = ((temp >> 8) & 0x7) + 3;
-                mem_tras = ((temp >> 11) & 0xf) + 6;
-        } else if (rdev->family == CHIP_R420 ||
-                   rdev->family == CHIP_R423 ||
-                   rdev->family == CHIP_RV410) {
-                /* r4xx */
-                mem_trcd = (temp & 0xf) + 3;
-                if (mem_trcd > 15)
-                        mem_trcd = 15;
-                mem_trp = ((temp >> 8) & 0xf) + 3;
-                if (mem_trp > 15)
-                        mem_trp = 15;
-                mem_tras = ((temp >> 12) & 0x1f) + 6;
-                if (mem_tras > 31)
-                        mem_tras = 31;
-        } else { /* RV200, R200 */
-                mem_trcd = (temp & 0x7) + 1;
-                mem_trp = ((temp >> 8) & 0x7) + 1;
-                mem_tras = ((temp >> 12) & 0xf) + 4;
-        }
-        /* convert to FF */
-        trcd_ff.full = rfixed_const(mem_trcd);
-        trp_ff.full = rfixed_const(mem_trp);
-        tras_ff.full = rfixed_const(mem_tras);
-
-        /* Get values from the MEM_SDRAM_MODE_REG register...converting its */
-        temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
-        data = (temp & (7 << 20)) >> 20;
-        if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
-                if (rdev->family == CHIP_RS480) /* don't think rs400 */
-                        tcas_ff = memtcas_rs480_ff[data];
-                else
-                        tcas_ff = memtcas_ff[data];
-        } else
-                tcas_ff = memtcas2_ff[data];
-
-        if (rdev->family == CHIP_RS400 ||
-            rdev->family == CHIP_RS480) {
-                /* extra cas latency stored in bits 23-25 0-4 clocks */
-                data = (temp >> 23) & 0x7;
-                if (data < 5)
-                        tcas_ff.full += rfixed_const(data);
-        }
-
-        if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
-                /* on the R300, Tcas is included in Trbs.
-                 */
-                temp = RREG32(RADEON_MEM_CNTL);
-                data = (R300_MEM_NUM_CHANNELS_MASK & temp);
-                if (data == 1) {
-                        if (R300_MEM_USE_CD_CH_ONLY & temp) {
-                                temp = RREG32(R300_MC_IND_INDEX);
-                                temp &= ~R300_MC_IND_ADDR_MASK;
-                                temp |= R300_MC_READ_CNTL_CD_mcind;
-                                WREG32(R300_MC_IND_INDEX, temp);
-                                temp = RREG32(R300_MC_IND_DATA);
-                                data = (R300_MEM_RBS_POSITION_C_MASK & temp);
-                        } else {
-                                temp = RREG32(R300_MC_READ_CNTL_AB);
-                                data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-                        }
-                } else {
-                        temp = RREG32(R300_MC_READ_CNTL_AB);
-                        data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-                }
-                if (rdev->family == CHIP_RV410 ||
-                    rdev->family == CHIP_R420 ||
-                    rdev->family == CHIP_R423)
-                        trbs_ff = memtrbs_r4xx[data];
-                else
-                        trbs_ff = memtrbs[data];
-                tcas_ff.full += trbs_ff.full;
-        }
-
-        sclk_eff_ff.full = sclk_ff.full;
-
-        if (rdev->flags & RADEON_IS_AGP) {
-                fixed20_12 agpmode_ff;
-                agpmode_ff.full = rfixed_const(radeon_agpmode);
-                temp_ff.full = rfixed_const_666(16);
-                sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
-        }
-        /* TODO PCIE lanes may affect this - agpmode == 16?? */
-
-        if (ASIC_IS_R300(rdev)) {
-                sclk_delay_ff.full = rfixed_const(250);
-        } else {
-                if ((rdev->family == CHIP_RV100) ||
-                    rdev->flags & RADEON_IS_IGP) {
-                        if (rdev->mc.vram_is_ddr)
-                                sclk_delay_ff.full = rfixed_const(41);
-                        else
-                                sclk_delay_ff.full = rfixed_const(33);
-                } else {
-                        if (rdev->mc.vram_width == 128)
-                                sclk_delay_ff.full = rfixed_const(57);
-                        else
-                                sclk_delay_ff.full = rfixed_const(41);
-                }
-        }
-
-        mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
-
-        if (rdev->mc.vram_is_ddr) {
-                if (rdev->mc.vram_width == 32) {
-                        k1.full = rfixed_const(40);
-                        c  = 3;
-                } else {
-                        k1.full = rfixed_const(20);
-                        c  = 1;
-                }
-        } else {
-                k1.full = rfixed_const(40);
-                c  = 3;
-        }
-
-        temp_ff.full = rfixed_const(2);
-        mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
-        temp_ff.full = rfixed_const(c);
-        mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
-        temp_ff.full = rfixed_const(4);
-        mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
-        mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
-        mc_latency_mclk.full += k1.full;
-
-        mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
-        mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
-
-        /*
-          HW cursor time assuming worst case of full size colour cursor.
-        */
-        temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
-        temp_ff.full += trcd_ff.full;
-        if (temp_ff.full < tras_ff.full)
-                temp_ff.full = tras_ff.full;
-        cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
-
-        temp_ff.full = rfixed_const(cur_size);
-        cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
-        /*
-          Find the total latency for the display data.
-        */
-        disp_latency_overhead.full = rfixed_const(80);
-        disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
-        mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
-        mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
-
-        if (mc_latency_mclk.full > mc_latency_sclk.full)
-                disp_latency.full = mc_latency_mclk.full;
-        else
-                disp_latency.full = mc_latency_sclk.full;
-
-        /* setup Max GRPH_STOP_REQ default value */
-        if (ASIC_IS_RV100(rdev))
-                max_stop_req = 0x5c;
-        else
-                max_stop_req = 0x7c;
-
-        if (mode1) {
-                /*  CRTC1
-                    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
-                    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
-                */
-                stop_req = mode1->hdisplay * pixel_bytes1 / 16;
-
-                if (stop_req > max_stop_req)
-                        stop_req = max_stop_req;
-
-                /*
-                  Find the drain rate of the display buffer.
-                */
-                temp_ff.full = rfixed_const((16/pixel_bytes1));
-                disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
-
-                /*
-                  Find the critical point of the display buffer.
-                */
-                crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
-                crit_point_ff.full += rfixed_const_half(0);
-
-                critical_point = rfixed_trunc(crit_point_ff);
-
-                if (rdev->disp_priority == 2) {
-                        critical_point = 0;
-                }
-
-                /*
-                  The critical point should never be above max_stop_req-4.  Setting
-                  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
-                */
-                if (max_stop_req - critical_point < 4)
-                        critical_point = 0;
-
-                if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
-                        /* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
-                        critical_point = 0x10;
-                }
-
-                temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
-                temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
-                temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-                temp &= ~(RADEON_GRPH_START_REQ_MASK);
-                if ((rdev->family == CHIP_R350) &&
-                    (stop_req > 0x15)) {
-                        stop_req -= 0x10;
-                }
-                temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-                temp |= RADEON_GRPH_BUFFER_SIZE;
-                temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-                          RADEON_GRPH_CRITICAL_AT_SOF |
-                          RADEON_GRPH_STOP_CNTL);
-                /*
-                  Write the result into the register.
-                */
-                WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-                                                       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-#if 0
-                if ((rdev->family == CHIP_RS400) ||
-                    (rdev->family == CHIP_RS480)) {
-                        /* attempt to program RS400 disp regs correctly ??? */
-                        temp = RREG32(RS400_DISP1_REG_CNTL);
-                        temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
-                                  RS400_DISP1_STOP_REQ_LEVEL_MASK);
-                        WREG32(RS400_DISP1_REQ_CNTL1, (temp |
-                                                       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-                                                       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-                        temp = RREG32(RS400_DMIF_MEM_CNTL1);
-                        temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
-                                  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
-                        WREG32(RS400_DMIF_MEM_CNTL1, (temp |
-                                                      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
-                                                      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
-                }
-#endif
-
-                DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
-                          /*      (unsigned int)info->SavedReg->grph_buffer_cntl, */
-                          (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
-        }
-
-        if (mode2) {
-                u32 grph2_cntl;
-                stop_req = mode2->hdisplay * pixel_bytes2 / 16;
-
-                if (stop_req > max_stop_req)
-                        stop_req = max_stop_req;
-
-                /*
-                  Find the drain rate of the display buffer.
-                */
-                temp_ff.full = rfixed_const((16/pixel_bytes2));
-                disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
-
-                grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
-                grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
-                grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-                grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
-                if ((rdev->family == CHIP_R350) &&
-                    (stop_req > 0x15)) {
-                        stop_req -= 0x10;
-                }
-                grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-                grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
-                grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-                          RADEON_GRPH_CRITICAL_AT_SOF |
-                          RADEON_GRPH_STOP_CNTL);
-
-                if ((rdev->family == CHIP_RS100) ||
-                    (rdev->family == CHIP_RS200))
-                        critical_point2 = 0;
-                else {
-                        temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
-                        temp_ff.full = rfixed_const(temp);
-                        temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
-                        if (sclk_ff.full < temp_ff.full)
-                                temp_ff.full = sclk_ff.full;
-
-                        read_return_rate.full = temp_ff.full;
-
-                        if (mode1) {
-                                temp_ff.full = read_return_rate.full - disp_drain_rate.full;
-                                time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
-                        } else {
-                                time_disp1_drop_priority.full = 0;
-                        }
-                        crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
-                        crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
-                        crit_point_ff.full += rfixed_const_half(0);
-
-                        critical_point2 = rfixed_trunc(crit_point_ff);
-
-                        if (rdev->disp_priority == 2) {
-                                critical_point2 = 0;
-                        }
-
-                        if (max_stop_req - critical_point2 < 4)
-                                critical_point2 = 0;
-
-                }
-
-                if (critical_point2 == 0 && rdev->family == CHIP_R300) {
-                        /* some R300 cards have problem with this set to 0 */
-                        critical_point2 = 0x10;
-                }
-
-                WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-                                                  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-                if ((rdev->family == CHIP_RS400) ||
-                    (rdev->family == CHIP_RS480)) {
-#if 0
-                        /* attempt to program RS400 disp2 regs correctly ??? */
-                        temp = RREG32(RS400_DISP2_REQ_CNTL1);
-                        temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
-                                  RS400_DISP2_STOP_REQ_LEVEL_MASK);
-                        WREG32(RS400_DISP2_REQ_CNTL1, (temp |
-                                                       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-                                                       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-                        temp = RREG32(RS400_DISP2_REQ_CNTL2);
-                        temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
-                                  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
-                        WREG32(RS400_DISP2_REQ_CNTL2, (temp |
-                                                       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
-                                                       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
-#endif
-                        WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
-                        WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
-                        WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
-                        WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
-                }
-
-                DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
-                          (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
-        }
-}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 2c2f42de1d4c..34d0f58eb944 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -30,170 +30,6 @@
 #include "atom.h"
 
 
-static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
-                                       struct drm_display_mode *mode,
-                                       struct drm_display_mode *adjusted_mode)
-{
-        struct drm_device *dev = encoder->dev;
-        struct radeon_device *rdev = dev->dev_private;
-        struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-        int    xres = mode->hdisplay;
-        int    yres = mode->vdisplay;
-        bool   hscale = true, vscale = true;
-        int    hsync_wid;
-        int    vsync_wid;
-        int    hsync_start;
-        uint32_t scale, inc;
-        uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
-        uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
-        struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
-        DRM_DEBUG("\n");
-
-        fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
-                (RADEON_VERT_STRETCH_RESERVED |
-                 RADEON_VERT_AUTO_RATIO_INC);
-        fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
-                (RADEON_HORZ_FP_LOOP_STRETCH |
-                 RADEON_HORZ_AUTO_RATIO_INC);
-
-        crtc_more_cntl = 0;
-        if ((rdev->family == CHIP_RS100) ||
-            (rdev->family == CHIP_RS200)) {
-                /* This is to workaround the asic bug for RMX, some versions
-                   of BIOS dosen't have this register initialized correctly. */
-                crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
-        }
-
-
-        fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
-                                | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-        hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-        if (!hsync_wid)
-                hsync_wid = 1;
-        hsync_start = mode->crtc_hsync_start - 8;
-
-        fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
-                              | ((hsync_wid & 0x3f) << 16)
-                              | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-                                 ? RADEON_CRTC_H_SYNC_POL
-                                 : 0));
-
-        fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
-                                | ((mode->crtc_vdisplay - 1) << 16));
-
-        vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-        if (!vsync_wid)
-                vsync_wid = 1;
-
-        fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
-                              | ((vsync_wid & 0x1f) << 16)
-                              | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-                                 ? RADEON_CRTC_V_SYNC_POL
-                                 : 0));
-
-        fp_horz_vert_active = 0;
-
-        if (native_mode->panel_xres == 0 ||
-            native_mode->panel_yres == 0) {
-                hscale = false;
-                vscale = false;
-        } else {
-                if (xres > native_mode->panel_xres)
-                        xres = native_mode->panel_xres;
-                if (yres > native_mode->panel_yres)
-                        yres = native_mode->panel_yres;
-
-                if (xres == native_mode->panel_xres)
-                        hscale = false;
-                if (yres == native_mode->panel_yres)
-                        vscale = false;
-        }
-
-        if (radeon_encoder->flags & RADEON_USE_RMX) {
-                if (radeon_encoder->rmx_type != RMX_CENTER) {
-                        if (!hscale)
-                                fp_horz_stretch |= ((xres/8-1) << 16);
-                        else {
-                                inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
-                                scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
-                                        / native_mode->panel_xres + 1;
-                                fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
-                                                    RADEON_HORZ_STRETCH_BLEND |
-                                                    RADEON_HORZ_STRETCH_ENABLE |
-                                                    ((native_mode->panel_xres/8-1) << 16));
-                        }
-
-                        if (!vscale)
-                                fp_vert_stretch |= ((yres-1) << 12);
-                        else {
-                                inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
-                                scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
-                                        / native_mode->panel_yres + 1;
-                                fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
-                                                    RADEON_VERT_STRETCH_ENABLE |
-                                                    RADEON_VERT_STRETCH_BLEND |
-                                                    ((native_mode->panel_yres-1) << 12));
-                        }
-                } else if (radeon_encoder->rmx_type == RMX_CENTER) {
-                        int    blank_width;
-
-                        fp_horz_stretch |= ((xres/8-1) << 16);
-                        fp_vert_stretch |= ((yres-1) << 12);
-
-                        crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
-                                           RADEON_CRTC_AUTO_VERT_CENTER_EN);
-
-                        blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
-                        if (blank_width > 110)
-                                blank_width = 110;
-
-                        fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
-                                                | ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-                        hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-                        if (!hsync_wid)
-                                hsync_wid = 1;
-
-                        fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
-                                              | ((hsync_wid & 0x3f) << 16)
-                                              | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-                                                 ? RADEON_CRTC_H_SYNC_POL
-                                                 : 0));
-
-                        fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
-                                                | ((mode->crtc_vdisplay - 1) << 16));
-
-                        vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-                        if (!vsync_wid)
-                                vsync_wid = 1;
-
-                        fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
-                                               | ((vsync_wid & 0x1f) << 16)
-                                               | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-                                                  ? RADEON_CRTC_V_SYNC_POL
-                                                  : 0)));
-
-                        fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
-                                               (((native_mode->panel_xres / 8) & 0x1ff) << 16));
-                }
-        } else {
-                fp_horz_stretch |= ((xres/8-1) << 16);
-                fp_vert_stretch |= ((yres-1) << 12);
-        }
-
-        WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
-        WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
-        WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
-        WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
-        WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
-        WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
-        WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
-        WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
-
-}
-
 static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
 {
         struct drm_device *dev = encoder->dev;
@@ -287,9 +123,6 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
         DRM_DEBUG("\n");
 
-        if (radeon_crtc->crtc_id == 0)
-                radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
         lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
         lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
 
@@ -318,7 +151,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
         if (radeon_crtc->crtc_id == 0) {
                 if (ASIC_IS_R300(rdev)) {
-                        if (radeon_encoder->flags & RADEON_USE_RMX)
+                        if (radeon_encoder->rmx_type != RMX_OFF)
                                 lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
                 } else
                         lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
@@ -350,8 +183,6 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder,
 
         drm_mode_set_crtcinfo(adjusted_mode, 0);
 
-        radeon_encoder->flags &= ~RADEON_USE_RMX;
-
         if (radeon_encoder->rmx_type != RMX_OFF)
                 radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
 
@@ -455,9 +286,6 @@ static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder,
 
         DRM_DEBUG("\n");
 
-        if (radeon_crtc->crtc_id == 0)
-                radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
         if (radeon_crtc->crtc_id == 0) {
                 if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
                         disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
@@ -653,9 +481,6 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
 
         DRM_DEBUG("\n");
 
-        if (radeon_crtc->crtc_id == 0)
-                radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
         tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
         tmp &= 0xfffff;
         if (rdev->family == CHIP_RV280) {
@@ -711,7 +536,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
     if (radeon_crtc->crtc_id == 0) {
             if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
                     fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
-                    if (radeon_encoder->flags & RADEON_USE_RMX)
+                    if (radeon_encoder->rmx_type != RMX_OFF)
                             fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
                     else
                             fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
@@ -820,9 +645,6 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 
         DRM_DEBUG("\n");
 
-        if (radeon_crtc->crtc_id == 0)
-                radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
         if (rdev->is_atom_bios) {
                 radeon_encoder->pixel_clock = adjusted_mode->clock;
                 atombios_external_tmds_setup(encoder, ATOM_ENABLE);
@@ -856,7 +678,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
         if (radeon_crtc->crtc_id == 0) {
                 if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
                         fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
-                        if (radeon_encoder->flags & RADEON_USE_RMX)
+                        if (radeon_encoder->rmx_type != RMX_OFF)
                                 fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
                         else
                                 fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
@@ -1014,9 +836,6 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 
         DRM_DEBUG("\n");
 
-        if (radeon_crtc->crtc_id == 0)
-                radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
         if (rdev->family != CHIP_R200) {
                 tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
                 if (rdev->family == CHIP_R420 ||
@@ -1243,6 +1062,7 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t
 
         radeon_encoder->encoder_id = encoder_id;
         radeon_encoder->devices = supported_device;
+        radeon_encoder->rmx_type = RMX_OFF;
 
         switch (radeon_encoder->encoder_id) {
         case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 9173b687462b..3b09a1f2d8f9 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -36,6 +36,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/i2c-algo-bit.h>
+#include "radeon_fixed.h"
+
+struct radeon_device;
 
 #define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
 #define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
@@ -124,6 +127,7 @@ struct radeon_tmds_pll {
 #define RADEON_PLL_PREFER_LOW_POST_DIV  (1 << 8)
 #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
 #define RADEON_PLL_USE_FRAC_FB_DIV      (1 << 10)
+#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
 
 struct radeon_pll {
         uint16_t reference_freq;
@@ -170,6 +174,18 @@ struct radeon_mode_info {
         struct atom_context *atom_context;
         enum radeon_connector_table connector_table;
         bool mode_config_initialized;
+        struct radeon_crtc *crtcs[2];
+};
+
+struct radeon_native_mode {
+        /* preferred mode */
+        uint32_t panel_xres, panel_yres;
+        uint32_t hoverplus, hsync_width;
+        uint32_t hblank;
+        uint32_t voverplus, vsync_width;
+        uint32_t vblank;
+        uint32_t dotclock;
+        uint32_t flags;
 };
 
 struct radeon_crtc {
@@ -185,19 +201,13 @@ struct radeon_crtc {
         uint64_t cursor_addr;
         int cursor_width;
         int cursor_height;
-};
-
-#define RADEON_USE_RMX 1
-
-struct radeon_native_mode {
-        /* preferred mode */
-        uint32_t panel_xres, panel_yres;
-        uint32_t hoverplus, hsync_width;
-        uint32_t hblank;
-        uint32_t voverplus, vsync_width;
-        uint32_t vblank;
-        uint32_t dotclock;
-        uint32_t flags;
+        uint32_t legacy_display_base_addr;
+        uint32_t legacy_cursor_offset;
+        enum radeon_rmx_type rmx_type;
+        uint32_t devices;
+        fixed20_12 vsc;
+        fixed20_12 hsc;
+        struct radeon_native_mode native_mode;
 };
 
 struct radeon_encoder_primary_dac {
@@ -383,16 +393,9 @@ void radeon_enc_destroy(struct drm_encoder *encoder);
 void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
 void radeon_combios_asic_init(struct drm_device *dev);
 extern int radeon_static_clocks_init(struct drm_device *dev);
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-                                struct drm_display_mode *mode1,
-                                uint32_t pixel_bytes1,
-                                struct drm_display_mode *mode2,
-                                uint32_t pixel_bytes2);
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-                               struct drm_display_mode *mode1,
-                               uint32_t pixel_bytes1,
-                               struct drm_display_mode *mode2,
-                               uint32_t pixel_bytes2);
-void radeon_init_disp_bandwidth(struct drm_device *dev);
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+                                        struct drm_display_mode *mode,
+                                        struct drm_display_mode *adjusted_mode);
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev);
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index bac0d06c52ac..dd9ac2fed6d6 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -44,6 +44,9 @@ struct radeon_object {
         uint64_t                        gpu_addr;
         void                            *kptr;
         bool                            is_iomem;
+        uint32_t                        tiling_flags;
+        uint32_t                        pitch;
+        int                             surface_reg;
 };
 
 int radeon_ttm_init(struct radeon_device *rdev);
@@ -70,6 +73,7 @@ static void radeon_ttm_object_object_destroy(struct ttm_buffer_object *tobj)
 
         robj = container_of(tobj, struct radeon_object, tobj);
         list_del_init(&robj->list);
+        radeon_object_clear_surface_reg(robj);
         kfree(robj);
 }
 
@@ -99,16 +103,16 @@ static inline uint32_t radeon_object_flags_from_domain(uint32_t domain)
 {
         uint32_t flags = 0;
         if (domain & RADEON_GEM_DOMAIN_VRAM) {
-                flags |= TTM_PL_FLAG_VRAM;
+                flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
         }
         if (domain & RADEON_GEM_DOMAIN_GTT) {
-                flags |= TTM_PL_FLAG_TT;
+                flags |= TTM_PL_FLAG_TT | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
         }
         if (domain & RADEON_GEM_DOMAIN_CPU) {
-                flags |= TTM_PL_FLAG_SYSTEM;
+                flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
         }
         if (!flags) {
-                flags |= TTM_PL_FLAG_SYSTEM;
+                flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
         }
         return flags;
 }
@@ -141,6 +145,7 @@ int radeon_object_create(struct radeon_device *rdev,
         }
         robj->rdev = rdev;
         robj->gobj = gobj;
+        robj->surface_reg = -1;
         INIT_LIST_HEAD(&robj->list);
 
         flags = radeon_object_flags_from_domain(domain);
@@ -304,7 +309,7 @@ int radeon_object_wait(struct radeon_object *robj)
         }
         spin_lock(&robj->tobj.lock);
         if (robj->tobj.sync_obj) {
-                r = ttm_bo_wait(&robj->tobj, true, false, false);
+                r = ttm_bo_wait(&robj->tobj, true, true, false);
         }
         spin_unlock(&robj->tobj.lock);
         radeon_object_unreserve(robj);
@@ -403,7 +408,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
         struct radeon_object *robj;
         struct radeon_fence *old_fence = NULL;
         struct list_head *i;
-        uint32_t flags;
         int r;
 
         r = radeon_object_list_reserve(head);
@@ -414,27 +418,25 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
         list_for_each(i, head) {
                 lobj = list_entry(i, struct radeon_object_list, list);
                 robj = lobj->robj;
-                if (lobj->wdomain) {
-                        flags = radeon_object_flags_from_domain(lobj->wdomain);
-                        flags |= TTM_PL_FLAG_TT;
-                } else {
-                        flags = radeon_object_flags_from_domain(lobj->rdomain);
-                        flags |= TTM_PL_FLAG_TT;
-                        flags |= TTM_PL_FLAG_VRAM;
-                }
                 if (!robj->pin_count) {
-                        robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+                        if (lobj->wdomain) {
+                                robj->tobj.proposed_placement =
+                                        radeon_object_flags_from_domain(lobj->wdomain);
+                        } else {
+                                robj->tobj.proposed_placement =
+                                        radeon_object_flags_from_domain(lobj->rdomain);
+                        }
                         r = ttm_buffer_object_validate(&robj->tobj,
                                                        robj->tobj.proposed_placement,
                                                        true, false);
                         if (unlikely(r)) {
-                                radeon_object_list_unreserve(head);
                                 DRM_ERROR("radeon: failed to validate.\n");
                                 return r;
                         }
                         radeon_object_gpu_addr(robj);
                 }
                 lobj->gpu_offset = robj->gpu_addr;
+                lobj->tiling_flags = robj->tiling_flags;
                 if (fence) {
                         old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
                         robj->tobj.sync_obj = radeon_fence_ref(fence);
@@ -479,3 +481,127 @@ unsigned long radeon_object_size(struct radeon_object *robj)
 {
         return robj->tobj.num_pages << PAGE_SHIFT;
 }
+
+int radeon_object_get_surface_reg(struct radeon_object *robj)
+{
+        struct radeon_device *rdev = robj->rdev;
+        struct radeon_surface_reg *reg;
+        struct radeon_object *old_object;
+        int steal;
+        int i;
+
+        if (!robj->tiling_flags)
+                return 0;
+
+        if (robj->surface_reg >= 0) {
+                reg = &rdev->surface_regs[robj->surface_reg];
+                i = robj->surface_reg;
+                goto out;
+        }
+
+        steal = -1;
+        for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) {
+
+                reg = &rdev->surface_regs[i];
+                if (!reg->robj)
+                        break;
+
+                old_object = reg->robj;
+                if (old_object->pin_count == 0)
+                        steal = i;
+        }
+
+        /* if we are all out */
+        if (i == RADEON_GEM_MAX_SURFACES) {
+                if (steal == -1)
+                        return -ENOMEM;
+                /* find someone with a surface reg and nuke their BO */
+                reg = &rdev->surface_regs[steal];
+                old_object = reg->robj;
+                /* blow away the mapping */
+                DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object);
+                ttm_bo_unmap_virtual(&old_object->tobj);
+                old_object->surface_reg = -1;
+                i = steal;
+        }
+
+        robj->surface_reg = i;
+        reg->robj = robj;
+
+out:
+        radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch,
+                               robj->tobj.mem.mm_node->start << PAGE_SHIFT,
+                               robj->tobj.num_pages << PAGE_SHIFT);
+        return 0;
+}
+
+void radeon_object_clear_surface_reg(struct radeon_object *robj)
+{
+        struct radeon_device *rdev = robj->rdev;
+        struct radeon_surface_reg *reg;
+
+        if (robj->surface_reg == -1)
+                return;
+
+        reg = &rdev->surface_regs[robj->surface_reg];
+        radeon_clear_surface_reg(rdev, robj->surface_reg);
+
+        reg->robj = NULL;
+        robj->surface_reg = -1;
+}
+
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+                                    uint32_t tiling_flags, uint32_t pitch)
+{
+        robj->tiling_flags = tiling_flags;
+        robj->pitch = pitch;
+}
+
+void radeon_object_get_tiling_flags(struct radeon_object *robj,
+                                    uint32_t *tiling_flags,
+                                    uint32_t *pitch)
+{
+        if (tiling_flags)
+                *tiling_flags = robj->tiling_flags;
+        if (pitch)
+                *pitch = robj->pitch;
+}
+
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+                               bool force_drop)
+{
+        if (!(robj->tiling_flags & RADEON_TILING_SURFACE))
+                return 0;
+
+        if (force_drop) {
+                radeon_object_clear_surface_reg(robj);
+                return 0;
+        }
+
+        if (robj->tobj.mem.mem_type != TTM_PL_VRAM) {
+                if (!has_moved)
+                        return 0;
+
+                if (robj->surface_reg >= 0)
+                        radeon_object_clear_surface_reg(robj);
+                return 0;
+        }
+
+        if ((robj->surface_reg >= 0) && !has_moved)
+                return 0;
+
+        return radeon_object_get_surface_reg(robj);
+}
+
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+                          struct ttm_mem_reg *mem)
+{
+        struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+        radeon_object_check_tiling(robj, 0, 1);
+}
+
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo)
+{
+        struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+        radeon_object_check_tiling(robj, 0, 0);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index a853261d1881..60d159308b88 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -126,32 +126,19 @@ static void radeon_ib_align(struct radeon_device *rdev, struct radeon_ib *ib)
         }
 }
 
-static void radeon_ib_cpu_flush(struct radeon_device *rdev,
-                                struct radeon_ib *ib)
-{
-        unsigned long tmp;
-        unsigned i;
-
-        /* To force CPU cache flush ugly but seems reliable */
-        for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
-                tmp = readl(&ib->ptr[i]);
-        }
-}
-
 int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
 {
         int r = 0;
 
         mutex_lock(&rdev->ib_pool.mutex);
         radeon_ib_align(rdev, ib);
-        radeon_ib_cpu_flush(rdev, ib);
         if (!ib->length_dw || !rdev->cp.ready) {
                 /* TODO: Nothings in the ib we should report. */
                 mutex_unlock(&rdev->ib_pool.mutex);
                 DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
                 return -EINVAL;
         }
-        /* 64 dwords should be enought for fence too */
+        /* 64 dwords should be enough for fence too */
         r = radeon_ring_lock(rdev, 64);
         if (r) {
                 DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_share.h b/drivers/gpu/drm/radeon/radeon_share.h
new file mode 100644
index 000000000000..63a773578f17
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_share.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_SHARE_H__
+#define __RADEON_SHARE_H__
+
+void r100_vram_init_sizes(struct radeon_device *rdev);
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+                              struct drm_display_mode *mode1,
+                              struct drm_display_mode *mode2);
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
new file mode 100644
index 000000000000..03c33cf4e14c
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2009 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Michel Dänzer
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+
+/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */
+void radeon_test_moves(struct radeon_device *rdev)
+{
+        struct radeon_object *vram_obj = NULL;
+        struct radeon_object **gtt_obj = NULL;
+        struct radeon_fence *fence = NULL;
+        uint64_t gtt_addr, vram_addr;
+        unsigned i, n, size;
+        int r;
+
+        size = 1024 * 1024;
+
+        /* Number of tests =
+         * (Total GTT - IB pool - writeback page - ring buffer) / test size
+         */
+        n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+             rdev->cp.ring_size) / size;
+
+        gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
+        if (!gtt_obj) {
+                DRM_ERROR("Failed to allocate %d pointers\n", n);
+                r = 1;
+                goto out_cleanup;
+        }
+
+        r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+                                 false, &vram_obj);
+        if (r) {
+                DRM_ERROR("Failed to create VRAM object\n");
+                goto out_cleanup;
+        }
+
+        r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr);
+        if (r) {
+                DRM_ERROR("Failed to pin VRAM object\n");
+                goto out_cleanup;
+        }
+
+        for (i = 0; i < n; i++) {
+                void *gtt_map, *vram_map;
+                void **gtt_start, **gtt_end;
+                void **vram_start, **vram_end;
+
+                r = radeon_object_create(rdev, NULL, size, true,
+                                         RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i);
+                if (r) {
+                        DRM_ERROR("Failed to create GTT object %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, &gtt_addr);
+                if (r) {
+                        DRM_ERROR("Failed to pin GTT object %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+                if (r) {
+                        DRM_ERROR("Failed to map GTT object %d\n", i);
+                        goto out_cleanup;
+                }
+
+                for (gtt_start = gtt_map, gtt_end = gtt_map + size;
+                     gtt_start < gtt_end;
+                     gtt_start++)
+                        *gtt_start = gtt_start;
+
+                radeon_object_kunmap(gtt_obj[i]);
+
+                r = radeon_fence_create(rdev, &fence);
+                if (r) {
+                        DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+                if (r) {
+                        DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_fence_wait(fence, false);
+                if (r) {
+                        DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i);
+                        goto out_cleanup;
+                }
+
+                radeon_fence_unref(&fence);
+
+                r = radeon_object_kmap(vram_obj, &vram_map);
+                if (r) {
+                        DRM_ERROR("Failed to map VRAM object after copy %d\n", i);
+                        goto out_cleanup;
+                }
+
+                for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+                     vram_start = vram_map, vram_end = vram_map + size;
+                     vram_start < vram_end;
+                     gtt_start++, vram_start++) {
+                        if (*vram_start != gtt_start) {
+                                DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
+                                          "expected 0x%p (GTT map 0x%p-0x%p)\n",
+                                          i, *vram_start, gtt_start, gtt_map,
+                                          gtt_end);
+                                radeon_object_kunmap(vram_obj);
+                                goto out_cleanup;
+                        }
+                        *vram_start = vram_start;
+                }
+
+                radeon_object_kunmap(vram_obj);
+
+                r = radeon_fence_create(rdev, &fence);
+                if (r) {
+                        DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+                if (r) {
+                        DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
+                        goto out_cleanup;
+                }
+
+                r = radeon_fence_wait(fence, false);
+                if (r) {
+                        DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i);
+                        goto out_cleanup;
+                }
+
+                radeon_fence_unref(&fence);
+
+                r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+                if (r) {
+                        DRM_ERROR("Failed to map GTT object after copy %d\n", i);
+                        goto out_cleanup;
+                }
+
+                for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+                     vram_start = vram_map, vram_end = vram_map + size;
+                     gtt_start < gtt_end;
+                     gtt_start++, vram_start++) {
+                        if (*gtt_start != vram_start) {
+                                DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
+                                          "expected 0x%p (VRAM map 0x%p-0x%p)\n",
+                                          i, *gtt_start, vram_start, vram_map,
+                                          vram_end);
+                                radeon_object_kunmap(gtt_obj[i]);
+                                goto out_cleanup;
+                        }
+                }
+
+                radeon_object_kunmap(gtt_obj[i]);
+
+                DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n",
+                         gtt_addr - rdev->mc.gtt_location);
+        }
+
+out_cleanup:
+        if (vram_obj) {
+                radeon_object_unpin(vram_obj);
+                radeon_object_unref(&vram_obj);
+        }
+        if (gtt_obj) {
+                for (i = 0; i < n; i++) {
+                        if (gtt_obj[i]) {
+                                radeon_object_unpin(gtt_obj[i]);
+                                radeon_object_unref(&gtt_obj[i]);
+                        }
+                }
+                kfree(gtt_obj);
+        }
+        if (fence) {
+                radeon_fence_unref(&fence);
+        }
+        if (r) {
+                printk(KERN_WARNING "Error while testing BO move.\n");
+        }
+}
+
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1227a97f5169..15c3531377ed 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -355,23 +355,26 @@ static int radeon_bo_move(struct ttm_buffer_object *bo,
         if (!rdev->cp.ready) {
                 /* use memcpy */
                 DRM_ERROR("CP is not ready use memcpy.\n");
-                return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+                goto memcpy;
         }
 
         if (old_mem->mem_type == TTM_PL_VRAM &&
             new_mem->mem_type == TTM_PL_SYSTEM) {
-                return radeon_move_vram_ram(bo, evict, interruptible,
+                r = radeon_move_vram_ram(bo, evict, interruptible,
                                             no_wait, new_mem);
         } else if (old_mem->mem_type == TTM_PL_SYSTEM &&
                    new_mem->mem_type == TTM_PL_VRAM) {
-                return radeon_move_ram_vram(bo, evict, interruptible,
+                r = radeon_move_ram_vram(bo, evict, interruptible,
                                             no_wait, new_mem);
         } else {
                 r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
-                if (unlikely(r)) {
-                        return r;
-                }
         }
+
+        if (r) {
+memcpy:
+                r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+        }
+
         return r;
 }
 
@@ -429,6 +432,8 @@ static struct ttm_bo_driver radeon_bo_driver = {
         .sync_obj_flush = &radeon_sync_obj_flush,
         .sync_obj_unref = &radeon_sync_obj_unref,
         .sync_obj_ref = &radeon_sync_obj_ref,
+        .move_notify = &radeon_bo_move_notify,
+        .fault_reserve_notify = &radeon_bo_fault_reserve_notify,
 };
 
 int radeon_ttm_init(struct radeon_device *rdev)
@@ -442,13 +447,14 @@ int radeon_ttm_init(struct radeon_device *rdev)
         /* No others user of address space so set it to 0 */
         r = ttm_bo_device_init(&rdev->mman.bdev,
                                rdev->mman.mem_global_ref.object,
-                               &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+                               &radeon_bo_driver, DRM_FILE_PAGE_OFFSET,
+                               rdev->need_dma32);
         if (r) {
                 DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
                 return r;
         }
         r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
-                           ((rdev->mc.aper_size) >> PAGE_SHIFT));
+                           ((rdev->mc.real_vram_size) >> PAGE_SHIFT));
         if (r) {
                 DRM_ERROR("Failed initializing VRAM heap.\n");
                 return r;
@@ -465,7 +471,7 @@ int radeon_ttm_init(struct radeon_device *rdev)
                 return r;
         }
         DRM_INFO("radeon: %uM of VRAM memory ready\n",
-                 rdev->mc.vram_size / (1024 * 1024));
+                 rdev->mc.real_vram_size / (1024 * 1024));
         r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
                            ((rdev->mc.gtt_size) >> PAGE_SHIFT));
         if (r) {
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index cc074b5a8f74..b29affd9c5d8 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -29,6 +29,7 @@
 #include <drm/drmP.h>
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rs400,rs480 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -164,7 +165,9 @@ int rs400_gart_enable(struct radeon_device *rdev)
                 WREG32(RADEON_BUS_CNTL, tmp);
         }
         /* Table should be in 32bits address space so ignore bits above. */
-        tmp = rdev->gart.table_addr & 0xfffff000;
+        tmp = (u32)rdev->gart.table_addr & 0xfffff000;
+        tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4;
+
         WREG32_MC(RS480_GART_BASE, tmp);
         /* TODO: more tweaking here */
         WREG32_MC(RS480_GART_FEATURE_ID,
@@ -201,10 +204,17 @@ void rs400_gart_disable(struct radeon_device *rdev)
 
 int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
+        uint32_t entry;
+
         if (i < 0 || i > rdev->gart.num_gpu_pages) {
                 return -EINVAL;
         }
-        rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+
+        entry = (lower_32_bits(addr) & PAGE_MASK) |
+                ((upper_32_bits(addr) & 0xff) << 4) |
+                0xc;
+        entry = cpu_to_le32(entry);
+        rdev->gart.table.ram.ptr[i] = entry;
         return 0;
 }
 
@@ -223,10 +233,9 @@ int rs400_mc_init(struct radeon_device *rdev)
 
         rs400_gpu_init(rdev);
         rs400_gart_disable(rdev);
-        rdev->mc.gtt_location = rdev->mc.vram_size;
+        rdev->mc.gtt_location = rdev->mc.mc_vram_size;
         rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
         rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
-        rdev->mc.vram_location = 0xFFFFFFFFUL;
         r = radeon_mc_setup(rdev);
         if (r) {
                 return r;
@@ -238,7 +247,7 @@ int rs400_mc_init(struct radeon_device *rdev)
                        "programming pipes. Bad things might happen.\n");
         }
 
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
         tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -284,21 +293,12 @@ void rs400_gpu_init(struct radeon_device *rdev)
  */
 void rs400_vram_info(struct radeon_device *rdev)
 {
-        uint32_t tom;
-
         rs400_gart_adjust_size(rdev);
         /* DDR for all card after R300 & IGP */
         rdev->mc.vram_is_ddr = true;
         rdev->mc.vram_width = 128;
 
-        /* read NB_TOM to get the amount of ram stolen for the GPU */
-        tom = RREG32(RADEON_NB_TOM);
-        rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-
-        /* Could aper size report 0 ? */
-        rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-        rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+        r100_vram_init_sizes(rdev);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index ab0c967553e6..bbea6dee4a94 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -223,7 +223,7 @@ int rs600_mc_init(struct radeon_device *rdev)
                 printk(KERN_WARNING "Failed to wait MC idle while "
                        "programming pipes. Bad things might happen.\n");
         }
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
         tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32_MC(RS600_MC_FB_LOCATION, tmp);
@@ -301,6 +301,11 @@ void rs600_vram_info(struct radeon_device *rdev)
         rdev->mc.vram_width = 128;
 }
 
+void rs600_bandwidth_update(struct radeon_device *rdev)
+{
+        /* FIXME: implement, should this be like rs690 ? */
+}
+
 
 /*
  * Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 79ba85042b5f..839595b00728 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -28,6 +28,9 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "rs690r.h"
+#include "atom.h"
+#include "atom-bits.h"
 
 /* rs690,rs740 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -64,7 +67,7 @@ int rs690_mc_init(struct radeon_device *rdev)
         rs400_gart_disable(rdev);
 
         /* Setup GPU memory space */
-        rdev->mc.gtt_location = rdev->mc.vram_size;
+        rdev->mc.gtt_location = rdev->mc.mc_vram_size;
         rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
         rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
         rdev->mc.vram_location = 0xFFFFFFFFUL;
@@ -79,7 +82,7 @@ int rs690_mc_init(struct radeon_device *rdev)
                 printk(KERN_WARNING "Failed to wait MC idle while "
                        "programming pipes. Bad things might happen.\n");
         }
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
         tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
@@ -138,9 +141,82 @@ void rs690_gpu_init(struct radeon_device *rdev)
 /*
  * VRAM info.
  */
+void rs690_pm_info(struct radeon_device *rdev)
+{
+        int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+        struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
+        struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
+        void *ptr;
+        uint16_t data_offset;
+        uint8_t frev, crev;
+        fixed20_12 tmp;
+
+        atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+                               &frev, &crev, &data_offset);
+        ptr = rdev->mode_info.atom_context->bios + data_offset;
+        info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
+        info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
+        /* Get various system informations from bios */
+        switch (crev) {
+        case 1:
+                tmp.full = rfixed_const(100);
+                rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
+                rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+                rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
+                rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
+                rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
+                break;
+        case 2:
+                tmp.full = rfixed_const(100);
+                rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
+                rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+                rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
+                rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+                rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
+                rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+                rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
+                break;
+        default:
+                tmp.full = rfixed_const(100);
+                /* We assume the slower possible clock ie worst case */
+                /* DDR 333Mhz */
+                rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+                /* FIXME: system clock ? */
+                rdev->pm.igp_system_mclk.full = rfixed_const(100);
+                rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+                rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+                rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+                DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+                break;
+        }
+        /* Compute various bandwidth */
+        /* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4  */
+        tmp.full = rfixed_const(4);
+        rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp);
+        /* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8
+         *              = ht_clk * ht_width / 5
+         */
+        tmp.full = rfixed_const(5);
+        rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk,
+                                                rdev->pm.igp_ht_link_width);
+        rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp);
+        if (tmp.full < rdev->pm.max_bandwidth.full) {
+                /* HT link is a limiting factor */
+                rdev->pm.max_bandwidth.full = tmp.full;
+        }
+        /* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7
+         *                    = (sideport_clk * 14) / 10
+         */
+        tmp.full = rfixed_const(14);
+        rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp);
+        tmp.full = rfixed_const(10);
+        rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp);
+}
+
 void rs690_vram_info(struct radeon_device *rdev)
 {
         uint32_t tmp;
+        fixed20_12 a;
 
         rs400_gart_adjust_size(rdev);
         /* DDR for all card after R300 & IGP */
@@ -152,12 +228,409 @@ void rs690_vram_info(struct radeon_device *rdev)
         } else {
                 rdev->mc.vram_width = 64;
         }
-        rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+        rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+        rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
         rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
         rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+        rs690_pm_info(rdev);
+        /* FIXME: we should enforce default clock in case GPU is not in
+         * default setup
+         */
+        a.full = rfixed_const(100);
+        rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+        rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+        a.full = rfixed_const(16);
+        /* core_bandwidth = sclk(Mhz) * 16 */
+        rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+                              struct drm_display_mode *mode1,
+                              struct drm_display_mode *mode2)
+{
+        u32 tmp;
+
+        /*
+         * Line Buffer Setup
+         * There is a single line buffer shared by both display controllers.
+         * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+         * the display controllers.  The paritioning can either be done
+         * manually or via one of four preset allocations specified in bits 1:0:
+         *  0 - line buffer is divided in half and shared between crtc
+         *  1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+         *  2 - D1 gets the whole buffer
+         *  3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+         * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+         * allocation mode. In manual allocation mode, D1 always starts at 0,
+         * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
+         */
+        tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
+        tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+        /* auto */
+        if (mode1 && mode2) {
+                if (mode1->hdisplay > mode2->hdisplay) {
+                        if (mode1->hdisplay > 2560)
+                                tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+                        else
+                                tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+                } else if (mode2->hdisplay > mode1->hdisplay) {
+                        if (mode2->hdisplay > 2560)
+                                tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+                        else
+                                tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+                } else
+                        tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+        } else if (mode1) {
+                tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+        } else if (mode2) {
+                tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+        }
+        WREG32(DC_LB_MEMORY_SPLIT, tmp);
 }
 
+struct rs690_watermark {
+        u32        lb_request_fifo_depth;
+        fixed20_12 num_line_pair;
+        fixed20_12 estimated_width;
+        fixed20_12 worst_case_latency;
+        fixed20_12 consumption_rate;
+        fixed20_12 active_time;
+        fixed20_12 dbpp;
+        fixed20_12 priority_mark_max;
+        fixed20_12 priority_mark;
+        fixed20_12 sclk;
+};
+
+void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
+                                  struct radeon_crtc *crtc,
+                                  struct rs690_watermark *wm)
+{
+        struct drm_display_mode *mode = &crtc->base.mode;
+        fixed20_12 a, b, c;
+        fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+        fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+        /* FIXME: detect IGP with sideport memory, i don't think there is any
+         * such product available
+         */
+        bool sideport = false;
+
+        if (!crtc->base.enabled) {
+                /* FIXME: wouldn't it better to set priority mark to maximum */
+                wm->lb_request_fifo_depth = 4;
+                return;
+        }
+
+        if (crtc->vsc.full > rfixed_const(2))
+                wm->num_line_pair.full = rfixed_const(2);
+        else
+                wm->num_line_pair.full = rfixed_const(1);
+
+        b.full = rfixed_const(mode->crtc_hdisplay);
+        c.full = rfixed_const(256);
+        a.full = rfixed_mul(wm->num_line_pair, b);
+        request_fifo_depth.full = rfixed_div(a, c);
+        if (a.full < rfixed_const(4)) {
+                wm->lb_request_fifo_depth = 4;
+        } else {
+                wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+        }
+
+        /* Determine consumption rate
+         *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+         *  vtaps = number of vertical taps,
+         *  vsc = vertical scaling ratio, defined as source/destination
+         *  hsc = horizontal scaling ration, defined as source/destination
+         */
+        a.full = rfixed_const(mode->clock);
+        b.full = rfixed_const(1000);
+        a.full = rfixed_div(a, b);
+        pclk.full = rfixed_div(b, a);
+        if (crtc->rmx_type != RMX_OFF) {
+                b.full = rfixed_const(2);
+                if (crtc->vsc.full > b.full)
+                        b.full = crtc->vsc.full;
+                b.full = rfixed_mul(b, crtc->hsc);
+                c.full = rfixed_const(2);
+                b.full = rfixed_div(b, c);
+                consumption_time.full = rfixed_div(pclk, b);
+        } else {
+                consumption_time.full = pclk.full;
+        }
+        a.full = rfixed_const(1);
+        wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+        /* Determine line time
+         *  LineTime = total time for one line of displayhtotal
+         *  LineTime = total number of horizontal pixels
+         *  pclk = pixel clock period(ns)
+         */
+        a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+        line_time.full = rfixed_mul(a, pclk);
+
+        /* Determine active time
+         *  ActiveTime = time of active region of display within one line,
+         *  hactive = total number of horizontal active pixels
+         *  htotal = total number of horizontal pixels
+         */
+        a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+        b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+        wm->active_time.full = rfixed_mul(line_time, b);
+        wm->active_time.full = rfixed_div(wm->active_time, a);
+
+        /* Maximun bandwidth is the minimun bandwidth of all component */
+        rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
+        if (sideport) {
+                if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
+                        rdev->pm.sideport_bandwidth.full)
+                        rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
+                read_delay_latency.full = rfixed_const(370 * 800 * 1000);
+                read_delay_latency.full = rfixed_div(read_delay_latency,
+                        rdev->pm.igp_sideport_mclk);
+        } else {
+                if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full &&
+                        rdev->pm.k8_bandwidth.full)
+                        rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth;
+                if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full &&
+                        rdev->pm.ht_bandwidth.full)
+                        rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth;
+                read_delay_latency.full = rfixed_const(5000);
+        }
+
+        /* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */
+        a.full = rfixed_const(16);
+        rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a);
+        a.full = rfixed_const(1000);
+        rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk);
+        /* Determine chunk time
+         * ChunkTime = the time it takes the DCP to send one chunk of data
+         * to the LB which consists of pipeline delay and inter chunk gap
+         * sclk = system clock(ns)
+         */
+        a.full = rfixed_const(256 * 13);
+        chunk_time.full = rfixed_mul(rdev->pm.sclk, a);
+        a.full = rfixed_const(10);
+        chunk_time.full = rfixed_div(chunk_time, a);
+
+        /* Determine the worst case latency
+         * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+         * WorstCaseLatency = worst case time from urgent to when the MC starts
+         *                    to return data
+         * READ_DELAY_IDLE_MAX = constant of 1us
+         * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+         *             which consists of pipeline delay and inter chunk gap
+         */
+        if (rfixed_trunc(wm->num_line_pair) > 1) {
+                a.full = rfixed_const(3);
+                wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+                wm->worst_case_latency.full += read_delay_latency.full;
+        } else {
+                a.full = rfixed_const(2);
+                wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+                wm->worst_case_latency.full += read_delay_latency.full;
+        }
+
+        /* Determine the tolerable latency
+         * TolerableLatency = Any given request has only 1 line time
+         *                    for the data to be returned
+         * LBRequestFifoDepth = Number of chunk requests the LB can
+         *                      put into the request FIFO for a display
+         *  LineTime = total time for one line of display
+         *  ChunkTime = the time it takes the DCP to send one chunk
+         *              of data to the LB which consists of
+         *  pipeline delay and inter chunk gap
+         */
+        if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+                tolerable_latency.full = line_time.full;
+        } else {
+                tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+                tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+                tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+                tolerable_latency.full = line_time.full - tolerable_latency.full;
+        }
+        /* We assume worst case 32bits (4 bytes) */
+        wm->dbpp.full = rfixed_const(4 * 8);
+
+        /* Determine the maximum priority mark
+         *  width = viewport width in pixels
+         */
+        a.full = rfixed_const(16);
+        wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+        wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+        /* Determine estimated width */
+        estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+        estimated_width.full = rfixed_div(estimated_width, consumption_time);
+        if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+                wm->priority_mark.full = rfixed_const(10);
+        } else {
+                a.full = rfixed_const(16);
+                wm->priority_mark.full = rfixed_div(estimated_width, a);
+                wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+        }
+}
+
+void rs690_bandwidth_update(struct radeon_device *rdev)
+{
+        struct drm_display_mode *mode0 = NULL;
+        struct drm_display_mode *mode1 = NULL;
+        struct rs690_watermark wm0;
+        struct rs690_watermark wm1;
+        u32 tmp;
+        fixed20_12 priority_mark02, priority_mark12, fill_rate;
+        fixed20_12 a, b;
+
+        if (rdev->mode_info.crtcs[0]->base.enabled)
+                mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+        if (rdev->mode_info.crtcs[1]->base.enabled)
+                mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+        /*
+         * Set display0/1 priority up in the memory controller for
+         * modes if the user specifies HIGH for displaypriority
+         * option.
+         */
+        if (rdev->disp_priority == 2) {
+                tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
+                tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+                tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+                if (mode1)
+                        tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+                if (mode0)
+                        tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+                WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+        }
+        rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+        if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
+                WREG32(DCP_CONTROL, 0);
+        if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
+                WREG32(DCP_CONTROL, 2);
+
+        rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+        rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+        tmp = (wm0.lb_request_fifo_depth - 1);
+        tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
+        WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+        if (mode0 && mode1) {
+                if (rfixed_trunc(wm0.dbpp) > 64)
+                        a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+                else
+                        a.full = wm0.num_line_pair.full;
+                if (rfixed_trunc(wm1.dbpp) > 64)
+                        b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+                else
+                        b.full = wm1.num_line_pair.full;
+                a.full += b.full;
+                fill_rate.full = rfixed_div(wm0.sclk, a);
+                if (wm0.consumption_rate.full > fill_rate.full) {
+                        b.full = wm0.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm0.active_time);
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        a.full = a.full + b.full;
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark02.full = rfixed_div(a, b);
+                } else {
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark02.full = rfixed_div(a, b);
+                }
+                if (wm1.consumption_rate.full > fill_rate.full) {
+                        b.full = wm1.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm1.active_time);
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        a.full = a.full + b.full;
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                } else {
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                }
+                if (wm0.priority_mark.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark.full;
+                if (rfixed_trunc(priority_mark02) < 0)
+                        priority_mark02.full = 0;
+                if (wm0.priority_mark_max.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark_max.full;
+                if (wm1.priority_mark.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark.full;
+                if (rfixed_trunc(priority_mark12) < 0)
+                        priority_mark12.full = 0;
+                if (wm1.priority_mark_max.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+                WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+        } else if (mode0) {
+                if (rfixed_trunc(wm0.dbpp) > 64)
+                        a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+                else
+                        a.full = wm0.num_line_pair.full;
+                fill_rate.full = rfixed_div(wm0.sclk, a);
+                if (wm0.consumption_rate.full > fill_rate.full) {
+                        b.full = wm0.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm0.active_time);
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        a.full = a.full + b.full;
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark02.full = rfixed_div(a, b);
+                } else {
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark02.full = rfixed_div(a, b);
+                }
+                if (wm0.priority_mark.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark.full;
+                if (rfixed_trunc(priority_mark02) < 0)
+                        priority_mark02.full = 0;
+                if (wm0.priority_mark_max.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+                WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+        } else {
+                if (rfixed_trunc(wm1.dbpp) > 64)
+                        a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+                else
+                        a.full = wm1.num_line_pair.full;
+                fill_rate.full = rfixed_div(wm1.sclk, a);
+                if (wm1.consumption_rate.full > fill_rate.full) {
+                        b.full = wm1.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm1.active_time);
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        a.full = a.full + b.full;
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                } else {
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                }
+                if (wm1.priority_mark.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark.full;
+                if (rfixed_trunc(priority_mark12) < 0)
+                        priority_mark12.full = 0;
+                if (wm1.priority_mark_max.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+                WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+                WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+                WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+        }
+}
 
 /*
  * Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h
new file mode 100644
index 000000000000..c0d9faa2175b
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690r.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RS690R_H
+#define RS690R_H
+
+/* RS690/RS740 registers */
+#define MC_INDEX                        0x0078
+#       define MC_INDEX_MASK                    0x1FF
+#       define MC_INDEX_WR_EN                   (1 << 9)
+#       define MC_INDEX_WR_ACK                  0x7F
+#define MC_DATA                         0x007C
+#define HDP_FB_LOCATION                 0x0134
+#define DC_LB_MEMORY_SPLIT              0x6520
+#define         DC_LB_MEMORY_SPLIT_MASK                 0x00000003
+#define         DC_LB_MEMORY_SPLIT_SHIFT                0
+#define         DC_LB_MEMORY_SPLIT_D1HALF_D2HALF        0
+#define         DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q          1
+#define         DC_LB_MEMORY_SPLIT_D1_ONLY              2
+#define         DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q          3
+#define         DC_LB_MEMORY_SPLIT_SHIFT_MODE           (1 << 2)
+#define         DC_LB_DISP1_END_ADR_SHIFT               4
+#define         DC_LB_DISP1_END_ADR_MASK                0x00007FF0
+#define D1MODE_PRIORITY_A_CNT           0x6548
+#define         MODE_PRIORITY_MARK_MASK                 0x00007FFF
+#define         MODE_PRIORITY_OFF                       (1 << 16)
+#define         MODE_PRIORITY_ALWAYS_ON                 (1 << 20)
+#define         MODE_PRIORITY_FORCE_MASK                (1 << 24)
+#define D1MODE_PRIORITY_B_CNT           0x654C
+#define LB_MAX_REQ_OUTSTANDING          0x6D58
+#define         LB_D1_MAX_REQ_OUTSTANDING_MASK          0x0000000F
+#define         LB_D1_MAX_REQ_OUTSTANDING_SHIFT         0
+#define         LB_D2_MAX_REQ_OUTSTANDING_MASK          0x000F0000
+#define         LB_D2_MAX_REQ_OUTSTANDING_SHIFT         16
+#define DCP_CONTROL                     0x6C9C
+#define D2MODE_PRIORITY_A_CNT           0x6D48
+#define D2MODE_PRIORITY_B_CNT           0x6D4C
+
+/* MC indirect registers */
+#define MC_STATUS_IDLE                          (1 << 0)
+#define MC_MISC_CNTL                    0x18
+#define         DISABLE_GTW                     (1 << 1)
+#define         GART_INDEX_REG_EN               (1 << 12)
+#define         BLOCK_GFX_D3_EN                 (1 << 14)
+#define GART_FEATURE_ID                 0x2B
+#define         HANG_EN                         (1 << 11)
+#define         TLB_ENABLE                      (1 << 18)
+#define         P2P_ENABLE                      (1 << 19)
+#define         GTW_LAC_EN                      (1 << 25)
+#define         LEVEL2_GART                     (0 << 30)
+#define         LEVEL1_GART                     (1 << 30)
+#define         PDC_EN                          (1 << 31)
+#define GART_BASE                       0x2C
+#define GART_CACHE_CNTRL                0x2E
+#       define GART_CACHE_INVALIDATE            (1 << 0)
+#define MC_STATUS                       0x90
+#define MCCFG_FB_LOCATION               0x100
+#define         MC_FB_START_MASK                0x0000FFFF
+#define         MC_FB_START_SHIFT               0
+#define         MC_FB_TOP_MASK                  0xFFFF0000
+#define         MC_FB_TOP_SHIFT                 16
+#define MCCFG_AGP_LOCATION              0x101
+#define         MC_AGP_START_MASK               0x0000FFFF
+#define         MC_AGP_START_SHIFT              0
+#define         MC_AGP_TOP_MASK                 0xFFFF0000
+#define         MC_AGP_TOP_SHIFT                16
+#define MCCFG_AGP_BASE                  0x102
+#define MCCFG_AGP_BASE_2                0x103
+#define MC_INIT_MISC_LAT_TIMER          0x104
+#define         MC_DISP0R_INIT_LAT_SHIFT        8
+#define         MC_DISP0R_INIT_LAT_MASK         0x00000F00
+#define         MC_DISP1R_INIT_LAT_SHIFT        12
+#define         MC_DISP1R_INIT_LAT_MASK         0x0000F000
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffea37b1b3e2..551e608702e4 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -27,8 +27,9 @@
  */
 #include <linux/seq_file.h>
 #include "drmP.h"
-#include "radeon_reg.h"
+#include "rv515r.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rv515 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -99,26 +100,26 @@ int rv515_mc_init(struct radeon_device *rdev)
                        "programming pipes. Bad things might happen.\n");
         }
         /* Write VRAM size in case we are limiting it */
-        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-        tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+        WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+        tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
         WREG32(0x134, tmp);
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
-        tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
-        tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
-        WREG32_MC(RV515_MC_FB_LOCATION, tmp);
-        WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
+        tmp = REG_SET(MC_FB_TOP, tmp >> 16);
+        tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
+        WREG32_MC(MC_FB_LOCATION, tmp);
+        WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
         WREG32(0x310, rdev->mc.vram_location);
         if (rdev->flags & RADEON_IS_AGP) {
                 tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-                tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
-                tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
-                WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
-                WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
-                WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+                tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
+                tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
+                WREG32_MC(MC_AGP_LOCATION, tmp);
+                WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
+                WREG32_MC(MC_AGP_BASE_2, 0);
         } else {
-                WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
-                WREG32_MC(RV515_MC_AGP_BASE, 0);
-                WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+                WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
+                WREG32_MC(MC_AGP_BASE, 0);
+                WREG32_MC(MC_AGP_BASE_2, 0);
         }
         return 0;
 }
@@ -136,95 +137,67 @@ void rv515_mc_fini(struct radeon_device *rdev)
  */
 void rv515_ring_start(struct radeon_device *rdev)
 {
-        unsigned gb_tile_config;
         int r;
 
-        /* Sub pixel 1/12 so we can have 4K rendering according to doc */
-        gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
-        switch (rdev->num_gb_pipes) {
-        case 2:
-                gb_tile_config |= R300_PIPE_COUNT_R300;
-                break;
-        case 3:
-                gb_tile_config |= R300_PIPE_COUNT_R420_3P;
-                break;
-        case 4:
-                gb_tile_config |= R300_PIPE_COUNT_R420;
-                break;
-        case 1:
-        default:
-                gb_tile_config |= R300_PIPE_COUNT_RV350;
-                break;
-        }
-
         r = radeon_ring_lock(rdev, 64);
         if (r) {
                 return;
         }
-        radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
-        radeon_ring_write(rdev,
-                          RADEON_ISYNC_ANY2D_IDLE3D |
-                          RADEON_ISYNC_ANY3D_IDLE2D |
-                          RADEON_ISYNC_WAIT_IDLEGUI |
-                          RADEON_ISYNC_CPSCRATCH_IDLEGUI);
-        radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
-        radeon_ring_write(rdev, gb_tile_config);
-        radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+        radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0));
         radeon_ring_write(rdev,
-                          RADEON_WAIT_2D_IDLECLEAN |
-                          RADEON_WAIT_3D_IDLECLEAN);
+                          ISYNC_ANY2D_IDLE3D |
+                          ISYNC_ANY3D_IDLE2D |
+                          ISYNC_WAIT_IDLEGUI |
+                          ISYNC_CPSCRATCH_IDLEGUI);
+        radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+        radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
         radeon_ring_write(rdev, PACKET0(0x170C, 0));
         radeon_ring_write(rdev, 1 << 31);
-        radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+        radeon_ring_write(rdev, PACKET0(GB_SELECT, 0));
         radeon_ring_write(rdev, 0);
-        radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+        radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0));
         radeon_ring_write(rdev, 0);
         radeon_ring_write(rdev, PACKET0(0x42C8, 0));
         radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
-        radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+        radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0));
         radeon_ring_write(rdev, 0);
-        radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-        radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-        radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-        radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-        radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
-        radeon_ring_write(rdev,
-                          RADEON_WAIT_2D_IDLECLEAN |
-                          RADEON_WAIT_3D_IDLECLEAN);
-        radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+        radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+        radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+        radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+        radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+        radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+        radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
+        radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0));
         radeon_ring_write(rdev, 0);
-        radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-        radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-        radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-        radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-        radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
-        radeon_ring_write(rdev,
-                          ((6 << R300_MS_X0_SHIFT) |
-                           (6 << R300_MS_Y0_SHIFT) |
-                           (6 << R300_MS_X1_SHIFT) |
-                           (6 << R300_MS_Y1_SHIFT) |
-                           (6 << R300_MS_X2_SHIFT) |
-                           (6 << R300_MS_Y2_SHIFT) |
-                           (6 << R300_MSBD0_Y_SHIFT) |
-                           (6 << R300_MSBD0_X_SHIFT)));
-        radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
+        radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+        radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+        radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+        radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+        radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0));
         radeon_ring_write(rdev,
-                          ((6 << R300_MS_X3_SHIFT) |
-                           (6 << R300_MS_Y3_SHIFT) |
-                           (6 << R300_MS_X4_SHIFT) |
-                           (6 << R300_MS_Y4_SHIFT) |
-                           (6 << R300_MS_X5_SHIFT) |
-                           (6 << R300_MS_Y5_SHIFT) |
-                           (6 << R300_MSBD1_SHIFT)));
-        radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
-        radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
-        radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+                          ((6 << MS_X0_SHIFT) |
+                           (6 << MS_Y0_SHIFT) |
+                           (6 << MS_X1_SHIFT) |
+                           (6 << MS_Y1_SHIFT) |
+                           (6 << MS_X2_SHIFT) |
+                           (6 << MS_Y2_SHIFT) |
+                           (6 << MSBD0_Y_SHIFT) |
+                           (6 << MSBD0_X_SHIFT)));
+        radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0));
         radeon_ring_write(rdev,
-                          R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
-        radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
-        radeon_ring_write(rdev,
-                          R300_GEOMETRY_ROUND_NEAREST |
-                          R300_COLOR_ROUND_NEAREST);
+                          ((6 << MS_X3_SHIFT) |
+                           (6 << MS_Y3_SHIFT) |
+                           (6 << MS_X4_SHIFT) |
+                           (6 << MS_Y4_SHIFT) |
+                           (6 << MS_X5_SHIFT) |
+                           (6 << MS_Y5_SHIFT) |
+                           (6 << MSBD1_SHIFT)));
+        radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0));
+        radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL);
+        radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0));
+        radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE);
+        radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0));
+        radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
         radeon_ring_write(rdev, PACKET0(0x20C8, 0));
         radeon_ring_write(rdev, 0);
         radeon_ring_unlock_commit(rdev);
@@ -242,8 +215,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 
         for (i = 0; i < rdev->usec_timeout; i++) {
                 /* read MC_STATUS */
-                tmp = RREG32_MC(RV515_MC_STATUS);
-                if (tmp & RV515_MC_STATUS_IDLE) {
+                tmp = RREG32_MC(MC_STATUS);
+                if (tmp & MC_STATUS_IDLE) {
                         return 0;
                 }
                 DRM_UDELAY(1);
@@ -291,33 +264,33 @@ int rv515_ga_reset(struct radeon_device *rdev)
         reinit_cp = rdev->cp.ready;
         rdev->cp.ready = false;
         for (i = 0; i < rdev->usec_timeout; i++) {
-                WREG32(RADEON_CP_CSQ_MODE, 0);
-                WREG32(RADEON_CP_CSQ_CNTL, 0);
-                WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
-                (void)RREG32(RADEON_RBBM_SOFT_RESET);
+                WREG32(CP_CSQ_MODE, 0);
+                WREG32(CP_CSQ_CNTL, 0);
+                WREG32(RBBM_SOFT_RESET, 0x32005);
+                (void)RREG32(RBBM_SOFT_RESET);
                 udelay(200);
-                WREG32(RADEON_RBBM_SOFT_RESET, 0);
+                WREG32(RBBM_SOFT_RESET, 0);
                 /* Wait to prevent race in RBBM_STATUS */
                 mdelay(1);
-                tmp = RREG32(RADEON_RBBM_STATUS);
+                tmp = RREG32(RBBM_STATUS);
                 if (tmp & ((1 << 20) | (1 << 26))) {
                         DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
                         /* GA still busy soft reset it */
                         WREG32(0x429C, 0x200);
-                        WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+                        WREG32(VAP_PVS_STATE_FLUSH_REG, 0);
                         WREG32(0x43E0, 0);
                         WREG32(0x43E4, 0);
                         WREG32(0x24AC, 0);
                 }
                 /* Wait to prevent race in RBBM_STATUS */
                 mdelay(1);
-                tmp = RREG32(RADEON_RBBM_STATUS);
+                tmp = RREG32(RBBM_STATUS);
                 if (!(tmp & ((1 << 20) | (1 << 26)))) {
                         break;
                 }
         }
         for (i = 0; i < rdev->usec_timeout; i++) {
-                tmp = RREG32(RADEON_RBBM_STATUS);
+                tmp = RREG32(RBBM_STATUS);
                 if (!(tmp & ((1 << 20) | (1 << 26)))) {
                         DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
                                  tmp);
@@ -331,7 +304,7 @@ int rv515_ga_reset(struct radeon_device *rdev)
                 }
                 DRM_UDELAY(1);
         }
-        tmp = RREG32(RADEON_RBBM_STATUS);
+        tmp = RREG32(RBBM_STATUS);
         DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
         return -1;
 }
@@ -341,7 +314,7 @@ int rv515_gpu_reset(struct radeon_device *rdev)
         uint32_t status;
 
         /* reset order likely matter */
-        status = RREG32(RADEON_RBBM_STATUS);
+        status = RREG32(RBBM_STATUS);
         /* reset HDP */
         r100_hdp_reset(rdev);
         /* reset rb2d */
@@ -353,12 +326,12 @@ int rv515_gpu_reset(struct radeon_device *rdev)
                 rv515_ga_reset(rdev);
         }
         /* reset CP */
-        status = RREG32(RADEON_RBBM_STATUS);
+        status = RREG32(RBBM_STATUS);
         if (status & (1 << 16)) {
                 r100_cp_reset(rdev);
         }
         /* Check if GPU is idle */
-        status = RREG32(RADEON_RBBM_STATUS);
+        status = RREG32(RBBM_STATUS);
         if (status & (1 << 31)) {
                 DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
                 return -1;
@@ -377,8 +350,7 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
         rdev->mc.vram_width = 128;
         rdev->mc.vram_is_ddr = true;
-        tmp = RREG32_MC(RV515_MC_CNTL);
-        tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+        tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK;
         switch (tmp) {
         case 0:
                 rdev->mc.vram_width = 64;
@@ -394,11 +366,16 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
 void rv515_vram_info(struct radeon_device *rdev)
 {
+        fixed20_12 a;
+
         rv515_vram_get_type(rdev);
-        rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-        rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-        rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+        /* FIXME: we should enforce default clock in case GPU is not in
+         * default setup
+         */
+        a.full = rfixed_const(100);
+        rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+        rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
 
@@ -409,35 +386,35 @@ uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
         uint32_t r;
 
-        WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
-        r = RREG32(R520_MC_IND_DATA);
-        WREG32(R520_MC_IND_INDEX, 0);
+        WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+        r = RREG32(MC_IND_DATA);
+        WREG32(MC_IND_INDEX, 0);
         return r;
 }
 
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-        WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
-        WREG32(R520_MC_IND_DATA, (v));
-        WREG32(R520_MC_IND_INDEX, 0);
+        WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+        WREG32(MC_IND_DATA, (v));
+        WREG32(MC_IND_INDEX, 0);
 }
 
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
 {
         uint32_t r;
 
-        WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-        (void)RREG32(RADEON_PCIE_INDEX);
-        r = RREG32(RADEON_PCIE_DATA);
+        WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+        (void)RREG32(PCIE_INDEX);
+        r = RREG32(PCIE_DATA);
         return r;
 }
 
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-        WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-        (void)RREG32(RADEON_PCIE_INDEX);
-        WREG32(RADEON_PCIE_DATA, (v));
-        (void)RREG32(RADEON_PCIE_DATA);
+        WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+        (void)RREG32(PCIE_INDEX);
+        WREG32(PCIE_DATA, (v));
+        (void)RREG32(PCIE_DATA);
 }
 
 
@@ -452,13 +429,13 @@ static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
         struct radeon_device *rdev = dev->dev_private;
         uint32_t tmp;
 
-        tmp = RREG32(R400_GB_PIPE_SELECT);
+        tmp = RREG32(GB_PIPE_SELECT);
         seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
-        tmp = RREG32(R500_SU_REG_DEST);
+        tmp = RREG32(SU_REG_DEST);
         seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
-        tmp = RREG32(R300_GB_TILE_CONFIG);
+        tmp = RREG32(GB_TILE_CONFIG);
         seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
-        tmp = RREG32(R300_DST_PIPE_CONFIG);
+        tmp = RREG32(DST_PIPE_CONFIG);
         seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
         return 0;
 }
@@ -509,9 +486,9 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 /*
  * Asic initialization
  */
-static const unsigned r500_reg_safe_bm[159] = {
+static const unsigned r500_reg_safe_bm[219] = {
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-        0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -549,14 +526,575 @@ static const unsigned r500_reg_safe_bm[159] = {
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
         0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
         0x00000000, 0x00000000, 0x00000000, 0x00000000,
-        0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+        0x0003FC01, 0x3FFFFCF8, 0xFE800B19, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+        0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 };
 
-
-
 int rv515_init(struct radeon_device *rdev)
 {
         rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
         rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
         return 0;
 }
+
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+        WREG32(0x659C, 0x0);
+        WREG32(0x6594, 0x705);
+        WREG32(0x65A4, 0x10001);
+        WREG32(0x65D8, 0x0);
+        WREG32(0x65B0, 0x0);
+        WREG32(0x65C0, 0x0);
+        WREG32(0x65D4, 0x0);
+        WREG32(0x6578, 0x0);
+        WREG32(0x657C, 0x841880A8);
+        WREG32(0x6578, 0x1);
+        WREG32(0x657C, 0x84208680);
+        WREG32(0x6578, 0x2);
+        WREG32(0x657C, 0xBFF880B0);
+        WREG32(0x6578, 0x100);
+        WREG32(0x657C, 0x83D88088);
+        WREG32(0x6578, 0x101);
+        WREG32(0x657C, 0x84608680);
+        WREG32(0x6578, 0x102);
+        WREG32(0x657C, 0xBFF080D0);
+        WREG32(0x6578, 0x200);
+        WREG32(0x657C, 0x83988068);
+        WREG32(0x6578, 0x201);
+        WREG32(0x657C, 0x84A08680);
+        WREG32(0x6578, 0x202);
+        WREG32(0x657C, 0xBFF080F8);
+        WREG32(0x6578, 0x300);
+        WREG32(0x657C, 0x83588058);
+        WREG32(0x6578, 0x301);
+        WREG32(0x657C, 0x84E08660);
+        WREG32(0x6578, 0x302);
+        WREG32(0x657C, 0xBFF88120);
+        WREG32(0x6578, 0x400);
+        WREG32(0x657C, 0x83188040);
+        WREG32(0x6578, 0x401);
+        WREG32(0x657C, 0x85008660);
+        WREG32(0x6578, 0x402);
+        WREG32(0x657C, 0xBFF88150);
+        WREG32(0x6578, 0x500);
+        WREG32(0x657C, 0x82D88030);
+        WREG32(0x6578, 0x501);
+        WREG32(0x657C, 0x85408640);
+        WREG32(0x6578, 0x502);
+        WREG32(0x657C, 0xBFF88180);
+        WREG32(0x6578, 0x600);
+        WREG32(0x657C, 0x82A08018);
+        WREG32(0x6578, 0x601);
+        WREG32(0x657C, 0x85808620);
+        WREG32(0x6578, 0x602);
+        WREG32(0x657C, 0xBFF081B8);
+        WREG32(0x6578, 0x700);
+        WREG32(0x657C, 0x82608010);
+        WREG32(0x6578, 0x701);
+        WREG32(0x657C, 0x85A08600);
+        WREG32(0x6578, 0x702);
+        WREG32(0x657C, 0x800081F0);
+        WREG32(0x6578, 0x800);
+        WREG32(0x657C, 0x8228BFF8);
+        WREG32(0x6578, 0x801);
+        WREG32(0x657C, 0x85E085E0);
+        WREG32(0x6578, 0x802);
+        WREG32(0x657C, 0xBFF88228);
+        WREG32(0x6578, 0x10000);
+        WREG32(0x657C, 0x82A8BF00);
+        WREG32(0x6578, 0x10001);
+        WREG32(0x657C, 0x82A08CC0);
+        WREG32(0x6578, 0x10002);
+        WREG32(0x657C, 0x8008BEF8);
+        WREG32(0x6578, 0x10100);
+        WREG32(0x657C, 0x81F0BF28);
+        WREG32(0x6578, 0x10101);
+        WREG32(0x657C, 0x83608CA0);
+        WREG32(0x6578, 0x10102);
+        WREG32(0x657C, 0x8018BED0);
+        WREG32(0x6578, 0x10200);
+        WREG32(0x657C, 0x8148BF38);
+        WREG32(0x6578, 0x10201);
+        WREG32(0x657C, 0x84408C80);
+        WREG32(0x6578, 0x10202);
+        WREG32(0x657C, 0x8008BEB8);
+        WREG32(0x6578, 0x10300);
+        WREG32(0x657C, 0x80B0BF78);
+        WREG32(0x6578, 0x10301);
+        WREG32(0x657C, 0x85008C20);
+        WREG32(0x6578, 0x10302);
+        WREG32(0x657C, 0x8020BEA0);
+        WREG32(0x6578, 0x10400);
+        WREG32(0x657C, 0x8028BF90);
+        WREG32(0x6578, 0x10401);
+        WREG32(0x657C, 0x85E08BC0);
+        WREG32(0x6578, 0x10402);
+        WREG32(0x657C, 0x8018BE90);
+        WREG32(0x6578, 0x10500);
+        WREG32(0x657C, 0xBFB8BFB0);
+        WREG32(0x6578, 0x10501);
+        WREG32(0x657C, 0x86C08B40);
+        WREG32(0x6578, 0x10502);
+        WREG32(0x657C, 0x8010BE90);
+        WREG32(0x6578, 0x10600);
+        WREG32(0x657C, 0xBF58BFC8);
+        WREG32(0x6578, 0x10601);
+        WREG32(0x657C, 0x87A08AA0);
+        WREG32(0x6578, 0x10602);
+        WREG32(0x657C, 0x8010BE98);
+        WREG32(0x6578, 0x10700);
+        WREG32(0x657C, 0xBF10BFF0);
+        WREG32(0x6578, 0x10701);
+        WREG32(0x657C, 0x886089E0);
+        WREG32(0x6578, 0x10702);
+        WREG32(0x657C, 0x8018BEB0);
+        WREG32(0x6578, 0x10800);
+        WREG32(0x657C, 0xBED8BFE8);
+        WREG32(0x6578, 0x10801);
+        WREG32(0x657C, 0x89408940);
+        WREG32(0x6578, 0x10802);
+        WREG32(0x657C, 0xBFE8BED8);
+        WREG32(0x6578, 0x20000);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20001);
+        WREG32(0x657C, 0x90008000);
+        WREG32(0x6578, 0x20002);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20003);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20100);
+        WREG32(0x657C, 0x80108000);
+        WREG32(0x6578, 0x20101);
+        WREG32(0x657C, 0x8FE0BF70);
+        WREG32(0x6578, 0x20102);
+        WREG32(0x657C, 0xBFE880C0);
+        WREG32(0x6578, 0x20103);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20200);
+        WREG32(0x657C, 0x8018BFF8);
+        WREG32(0x6578, 0x20201);
+        WREG32(0x657C, 0x8F80BF08);
+        WREG32(0x6578, 0x20202);
+        WREG32(0x657C, 0xBFD081A0);
+        WREG32(0x6578, 0x20203);
+        WREG32(0x657C, 0xBFF88000);
+        WREG32(0x6578, 0x20300);
+        WREG32(0x657C, 0x80188000);
+        WREG32(0x6578, 0x20301);
+        WREG32(0x657C, 0x8EE0BEC0);
+        WREG32(0x6578, 0x20302);
+        WREG32(0x657C, 0xBFB082A0);
+        WREG32(0x6578, 0x20303);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20400);
+        WREG32(0x657C, 0x80188000);
+        WREG32(0x6578, 0x20401);
+        WREG32(0x657C, 0x8E00BEA0);
+        WREG32(0x6578, 0x20402);
+        WREG32(0x657C, 0xBF8883C0);
+        WREG32(0x6578, 0x20403);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x20500);
+        WREG32(0x657C, 0x80188000);
+        WREG32(0x6578, 0x20501);
+        WREG32(0x657C, 0x8D00BE90);
+        WREG32(0x6578, 0x20502);
+        WREG32(0x657C, 0xBF588500);
+        WREG32(0x6578, 0x20503);
+        WREG32(0x657C, 0x80008008);
+        WREG32(0x6578, 0x20600);
+        WREG32(0x657C, 0x80188000);
+        WREG32(0x6578, 0x20601);
+        WREG32(0x657C, 0x8BC0BE98);
+        WREG32(0x6578, 0x20602);
+        WREG32(0x657C, 0xBF308660);
+        WREG32(0x6578, 0x20603);
+        WREG32(0x657C, 0x80008008);
+        WREG32(0x6578, 0x20700);
+        WREG32(0x657C, 0x80108000);
+        WREG32(0x6578, 0x20701);
+        WREG32(0x657C, 0x8A80BEB0);
+        WREG32(0x6578, 0x20702);
+        WREG32(0x657C, 0xBF0087C0);
+        WREG32(0x6578, 0x20703);
+        WREG32(0x657C, 0x80008008);
+        WREG32(0x6578, 0x20800);
+        WREG32(0x657C, 0x80108000);
+        WREG32(0x6578, 0x20801);
+        WREG32(0x657C, 0x8920BED0);
+        WREG32(0x6578, 0x20802);
+        WREG32(0x657C, 0xBED08920);
+        WREG32(0x6578, 0x20803);
+        WREG32(0x657C, 0x80008010);
+        WREG32(0x6578, 0x30000);
+        WREG32(0x657C, 0x90008000);
+        WREG32(0x6578, 0x30001);
+        WREG32(0x657C, 0x80008000);
+        WREG32(0x6578, 0x30100);
+        WREG32(0x657C, 0x8FE0BF90);
+        WREG32(0x6578, 0x30101);
+        WREG32(0x657C, 0xBFF880A0);
+        WREG32(0x6578, 0x30200);
+        WREG32(0x657C, 0x8F60BF40);
+        WREG32(0x6578, 0x30201);
+        WREG32(0x657C, 0xBFE88180);
+        WREG32(0x6578, 0x30300);
+        WREG32(0x657C, 0x8EC0BF00);
+        WREG32(0x6578, 0x30301);
+        WREG32(0x657C, 0xBFC88280);
+        WREG32(0x6578, 0x30400);
+        WREG32(0x657C, 0x8DE0BEE0);
+        WREG32(0x6578, 0x30401);
+        WREG32(0x657C, 0xBFA083A0);
+        WREG32(0x6578, 0x30500);
+        WREG32(0x657C, 0x8CE0BED0);
+        WREG32(0x6578, 0x30501);
+        WREG32(0x657C, 0xBF7884E0);
+        WREG32(0x6578, 0x30600);
+        WREG32(0x657C, 0x8BA0BED8);
+        WREG32(0x6578, 0x30601);
+        WREG32(0x657C, 0xBF508640);
+        WREG32(0x6578, 0x30700);
+        WREG32(0x657C, 0x8A60BEE8);
+        WREG32(0x6578, 0x30701);
+        WREG32(0x657C, 0xBF2087A0);
+        WREG32(0x6578, 0x30800);
+        WREG32(0x657C, 0x8900BF00);
+        WREG32(0x6578, 0x30801);
+        WREG32(0x657C, 0xBF008900);
+}
+
+struct rv515_watermark {
+        u32        lb_request_fifo_depth;
+        fixed20_12 num_line_pair;
+        fixed20_12 estimated_width;
+        fixed20_12 worst_case_latency;
+        fixed20_12 consumption_rate;
+        fixed20_12 active_time;
+        fixed20_12 dbpp;
+        fixed20_12 priority_mark_max;
+        fixed20_12 priority_mark;
+        fixed20_12 sclk;
+};
+
+void rv515_crtc_bandwidth_compute(struct radeon_device *rdev,
+                                  struct radeon_crtc *crtc,
+                                  struct rv515_watermark *wm)
+{
+        struct drm_display_mode *mode = &crtc->base.mode;
+        fixed20_12 a, b, c;
+        fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+        fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+
+        if (!crtc->base.enabled) {
+                /* FIXME: wouldn't it better to set priority mark to maximum */
+                wm->lb_request_fifo_depth = 4;
+                return;
+        }
+
+        if (crtc->vsc.full > rfixed_const(2))
+                wm->num_line_pair.full = rfixed_const(2);
+        else
+                wm->num_line_pair.full = rfixed_const(1);
+
+        b.full = rfixed_const(mode->crtc_hdisplay);
+        c.full = rfixed_const(256);
+        a.full = rfixed_mul(wm->num_line_pair, b);
+        request_fifo_depth.full = rfixed_div(a, c);
+        if (a.full < rfixed_const(4)) {
+                wm->lb_request_fifo_depth = 4;
+        } else {
+                wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+        }
+
+        /* Determine consumption rate
+         *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+         *  vtaps = number of vertical taps,
+         *  vsc = vertical scaling ratio, defined as source/destination
+         *  hsc = horizontal scaling ration, defined as source/destination
+         */
+        a.full = rfixed_const(mode->clock);
+        b.full = rfixed_const(1000);
+        a.full = rfixed_div(a, b);
+        pclk.full = rfixed_div(b, a);
+        if (crtc->rmx_type != RMX_OFF) {
+                b.full = rfixed_const(2);
+                if (crtc->vsc.full > b.full)
+                        b.full = crtc->vsc.full;
+                b.full = rfixed_mul(b, crtc->hsc);
+                c.full = rfixed_const(2);
+                b.full = rfixed_div(b, c);
+                consumption_time.full = rfixed_div(pclk, b);
+        } else {
+                consumption_time.full = pclk.full;
+        }
+        a.full = rfixed_const(1);
+        wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+        /* Determine line time
+         *  LineTime = total time for one line of displayhtotal
+         *  LineTime = total number of horizontal pixels
+         *  pclk = pixel clock period(ns)
+         */
+        a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+        line_time.full = rfixed_mul(a, pclk);
+
+        /* Determine active time
+         *  ActiveTime = time of active region of display within one line,
+         *  hactive = total number of horizontal active pixels
+         *  htotal = total number of horizontal pixels
+         */
+        a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+        b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+        wm->active_time.full = rfixed_mul(line_time, b);
+        wm->active_time.full = rfixed_div(wm->active_time, a);
+
+        /* Determine chunk time
+         * ChunkTime = the time it takes the DCP to send one chunk of data
+         * to the LB which consists of pipeline delay and inter chunk gap
+         * sclk = system clock(Mhz)
+         */
+        a.full = rfixed_const(600 * 1000);
+        chunk_time.full = rfixed_div(a, rdev->pm.sclk);
+        read_delay_latency.full = rfixed_const(1000);
+
+        /* Determine the worst case latency
+         * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+         * WorstCaseLatency = worst case time from urgent to when the MC starts
+         *                    to return data
+         * READ_DELAY_IDLE_MAX = constant of 1us
+         * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+         *             which consists of pipeline delay and inter chunk gap
+         */
+        if (rfixed_trunc(wm->num_line_pair) > 1) {
+                a.full = rfixed_const(3);
+                wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+                wm->worst_case_latency.full += read_delay_latency.full;
+        } else {
+                wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full;
+        }
+
+        /* Determine the tolerable latency
+         * TolerableLatency = Any given request has only 1 line time
+         *                    for the data to be returned
+         * LBRequestFifoDepth = Number of chunk requests the LB can
+         *                      put into the request FIFO for a display
+         *  LineTime = total time for one line of display
+         *  ChunkTime = the time it takes the DCP to send one chunk
+         *              of data to the LB which consists of
+         *  pipeline delay and inter chunk gap
+         */
+        if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+                tolerable_latency.full = line_time.full;
+        } else {
+                tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+                tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+                tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+                tolerable_latency.full = line_time.full - tolerable_latency.full;
+        }
+        /* We assume worst case 32bits (4 bytes) */
+        wm->dbpp.full = rfixed_const(2 * 16);
+
+        /* Determine the maximum priority mark
+         *  width = viewport width in pixels
+         */
+        a.full = rfixed_const(16);
+        wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+        wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+        /* Determine estimated width */
+        estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+        estimated_width.full = rfixed_div(estimated_width, consumption_time);
+        if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+                wm->priority_mark.full = rfixed_const(10);
+        } else {
+                a.full = rfixed_const(16);
+                wm->priority_mark.full = rfixed_div(estimated_width, a);
+                wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+        }
+}
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
+{
+        struct drm_display_mode *mode0 = NULL;
+        struct drm_display_mode *mode1 = NULL;
+        struct rv515_watermark wm0;
+        struct rv515_watermark wm1;
+        u32 tmp;
+        fixed20_12 priority_mark02, priority_mark12, fill_rate;
+        fixed20_12 a, b;
+
+        if (rdev->mode_info.crtcs[0]->base.enabled)
+                mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+        if (rdev->mode_info.crtcs[1]->base.enabled)
+                mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+        rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+        rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+        rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+        tmp = wm0.lb_request_fifo_depth;
+        tmp |= wm1.lb_request_fifo_depth << 16;
+        WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+        if (mode0 && mode1) {
+                if (rfixed_trunc(wm0.dbpp) > 64)
+                        a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+                else
+                        a.full = wm0.num_line_pair.full;
+                if (rfixed_trunc(wm1.dbpp) > 64)
+                        b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+                else
+                        b.full = wm1.num_line_pair.full;
+                a.full += b.full;
+                fill_rate.full = rfixed_div(wm0.sclk, a);
+                if (wm0.consumption_rate.full > fill_rate.full) {
+                        b.full = wm0.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm0.active_time);
+                        a.full = rfixed_const(16);
+                        b.full = rfixed_div(b, a);
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        priority_mark02.full = a.full + b.full;
+                } else {
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark02.full = rfixed_div(a, b);
+                }
+                if (wm1.consumption_rate.full > fill_rate.full) {
+                        b.full = wm1.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm1.active_time);
+                        a.full = rfixed_const(16);
+                        b.full = rfixed_div(b, a);
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        priority_mark12.full = a.full + b.full;
+                } else {
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                }
+                if (wm0.priority_mark.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark.full;
+                if (rfixed_trunc(priority_mark02) < 0)
+                        priority_mark02.full = 0;
+                if (wm0.priority_mark_max.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark_max.full;
+                if (wm1.priority_mark.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark.full;
+                if (rfixed_trunc(priority_mark12) < 0)
+                        priority_mark12.full = 0;
+                if (wm1.priority_mark_max.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+                WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+        } else if (mode0) {
+                if (rfixed_trunc(wm0.dbpp) > 64)
+                        a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+                else
+                        a.full = wm0.num_line_pair.full;
+                fill_rate.full = rfixed_div(wm0.sclk, a);
+                if (wm0.consumption_rate.full > fill_rate.full) {
+                        b.full = wm0.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm0.active_time);
+                        a.full = rfixed_const(16);
+                        b.full = rfixed_div(b, a);
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        priority_mark02.full = a.full + b.full;
+                } else {
+                        a.full = rfixed_mul(wm0.worst_case_latency,
+                                                wm0.consumption_rate);
+                        b.full = rfixed_const(16);
+                        priority_mark02.full = rfixed_div(a, b);
+                }
+                if (wm0.priority_mark.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark.full;
+                if (rfixed_trunc(priority_mark02) < 0)
+                        priority_mark02.full = 0;
+                if (wm0.priority_mark_max.full > priority_mark02.full)
+                        priority_mark02.full = wm0.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+                WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+                WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+        } else {
+                if (rfixed_trunc(wm1.dbpp) > 64)
+                        a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+                else
+                        a.full = wm1.num_line_pair.full;
+                fill_rate.full = rfixed_div(wm1.sclk, a);
+                if (wm1.consumption_rate.full > fill_rate.full) {
+                        b.full = wm1.consumption_rate.full - fill_rate.full;
+                        b.full = rfixed_mul(b, wm1.active_time);
+                        a.full = rfixed_const(16);
+                        b.full = rfixed_div(b, a);
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        priority_mark12.full = a.full + b.full;
+                } else {
+                        a.full = rfixed_mul(wm1.worst_case_latency,
+                                                wm1.consumption_rate);
+                        b.full = rfixed_const(16 * 1000);
+                        priority_mark12.full = rfixed_div(a, b);
+                }
+                if (wm1.priority_mark.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark.full;
+                if (rfixed_trunc(priority_mark12) < 0)
+                        priority_mark12.full = 0;
+                if (wm1.priority_mark_max.full > priority_mark12.full)
+                        priority_mark12.full = wm1.priority_mark_max.full;
+                WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+                WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+                WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+                WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+        }
+}
+
+void rv515_bandwidth_update(struct radeon_device *rdev)
+{
+        uint32_t tmp;
+        struct drm_display_mode *mode0 = NULL;
+        struct drm_display_mode *mode1 = NULL;
+
+        if (rdev->mode_info.crtcs[0]->base.enabled)
+                mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+        if (rdev->mode_info.crtcs[1]->base.enabled)
+                mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+        /*
+         * Set display0/1 priority up in the memory controller for
+         * modes if the user specifies HIGH for displaypriority
+         * option.
+         */
+        if (rdev->disp_priority == 2) {
+                tmp = RREG32_MC(MC_MISC_LAT_TIMER);
+                tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+                tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+                if (mode1)
+                        tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+                if (mode0)
+                        tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+                WREG32_MC(MC_MISC_LAT_TIMER, tmp);
+        }
+        rv515_bandwidth_avivo_update(rdev);
+}
diff --git a/drivers/gpu/drm/radeon/rv515r.h b/drivers/gpu/drm/radeon/rv515r.h
new file mode 100644
index 000000000000..f3cf84039906
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv515r.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RV515R_H
+#define RV515R_H
+
+/* RV515 registers */
+#define PCIE_INDEX                      0x0030
+#define PCIE_DATA                       0x0034
+#define MC_IND_INDEX                    0x0070
+#define         MC_IND_WR_EN                            (1 << 24)
+#define MC_IND_DATA                     0x0074
+#define RBBM_SOFT_RESET                 0x00F0
+#define CONFIG_MEMSIZE                  0x00F8
+#define HDP_FB_LOCATION                 0x0134
+#define CP_CSQ_CNTL                     0x0740
+#define CP_CSQ_MODE                     0x0744
+#define CP_CSQ_ADDR                     0x07F0
+#define CP_CSQ_DATA                     0x07F4
+#define CP_CSQ_STAT                     0x07F8
+#define CP_CSQ2_STAT                    0x07FC
+#define RBBM_STATUS                     0x0E40
+#define DST_PIPE_CONFIG                 0x170C
+#define WAIT_UNTIL                      0x1720
+#define         WAIT_2D_IDLE                            (1 << 14)
+#define         WAIT_3D_IDLE                            (1 << 15)
+#define         WAIT_2D_IDLECLEAN                       (1 << 16)
+#define         WAIT_3D_IDLECLEAN                       (1 << 17)
+#define ISYNC_CNTL                      0x1724
+#define         ISYNC_ANY2D_IDLE3D                      (1 << 0)
+#define         ISYNC_ANY3D_IDLE2D                      (1 << 1)
+#define         ISYNC_TRIG2D_IDLE3D                     (1 << 2)
+#define         ISYNC_TRIG3D_IDLE2D                     (1 << 3)
+#define         ISYNC_WAIT_IDLEGUI                      (1 << 4)
+#define         ISYNC_CPSCRATCH_IDLEGUI                 (1 << 5)
+#define VAP_INDEX_OFFSET                0x208C
+#define VAP_PVS_STATE_FLUSH_REG         0x2284
+#define GB_ENABLE                       0x4008
+#define GB_MSPOS0                       0x4010
+#define         MS_X0_SHIFT                             0
+#define         MS_Y0_SHIFT                             4
+#define         MS_X1_SHIFT                             8
+#define         MS_Y1_SHIFT                             12
+#define         MS_X2_SHIFT                             16
+#define         MS_Y2_SHIFT                             20
+#define         MSBD0_Y_SHIFT                           24
+#define         MSBD0_X_SHIFT                           28
+#define GB_MSPOS1                       0x4014
+#define         MS_X3_SHIFT                             0
+#define         MS_Y3_SHIFT                             4
+#define         MS_X4_SHIFT                             8
+#define         MS_Y4_SHIFT                             12
+#define         MS_X5_SHIFT                             16
+#define         MS_Y5_SHIFT                             20
+#define         MSBD1_SHIFT                             24
+#define GB_TILE_CONFIG                  0x4018
+#define         ENABLE_TILING                           (1 << 0)
+#define         PIPE_COUNT_MASK                         0x0000000E
+#define         PIPE_COUNT_SHIFT                        1
+#define         TILE_SIZE_8                             (0 << 4)
+#define         TILE_SIZE_16                            (1 << 4)
+#define         TILE_SIZE_32                            (2 << 4)
+#define         SUBPIXEL_1_12                           (0 << 16)
+#define         SUBPIXEL_1_16                           (1 << 16)
+#define GB_SELECT                       0x401C
+#define GB_AA_CONFIG                    0x4020
+#define GB_PIPE_SELECT                  0x402C
+#define GA_ENHANCE                      0x4274
+#define         GA_DEADLOCK_CNTL                        (1 << 0)
+#define         GA_FASTSYNC_CNTL                        (1 << 1)
+#define GA_POLY_MODE                    0x4288
+#define         FRONT_PTYPE_POINT                       (0 << 4)
+#define         FRONT_PTYPE_LINE                        (1 << 4)
+#define         FRONT_PTYPE_TRIANGE                     (2 << 4)
+#define         BACK_PTYPE_POINT                        (0 << 7)
+#define         BACK_PTYPE_LINE                         (1 << 7)
+#define         BACK_PTYPE_TRIANGE                      (2 << 7)
+#define GA_ROUND_MODE                   0x428C
+#define         GEOMETRY_ROUND_TRUNC                    (0 << 0)
+#define         GEOMETRY_ROUND_NEAREST                  (1 << 0)
+#define         COLOR_ROUND_TRUNC                       (0 << 2)
+#define         COLOR_ROUND_NEAREST                     (1 << 2)
+#define SU_REG_DEST                     0x42C8
+#define RB3D_DSTCACHE_CTLSTAT           0x4E4C
+#define         RB3D_DC_FLUSH                           (2 << 0)
+#define         RB3D_DC_FREE                            (2 << 2)
+#define         RB3D_DC_FINISH                          (1 << 4)
+#define ZB_ZCACHE_CTLSTAT               0x4F18
+#define         ZC_FLUSH                                (1 << 0)
+#define         ZC_FREE                                 (1 << 1)
+#define DC_LB_MEMORY_SPLIT              0x6520
+#define         DC_LB_MEMORY_SPLIT_MASK                 0x00000003
+#define         DC_LB_MEMORY_SPLIT_SHIFT                0
+#define         DC_LB_MEMORY_SPLIT_D1HALF_D2HALF        0
+#define         DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q          1
+#define         DC_LB_MEMORY_SPLIT_D1_ONLY              2
+#define         DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q          3
+#define         DC_LB_MEMORY_SPLIT_SHIFT_MODE           (1 << 2)
+#define         DC_LB_DISP1_END_ADR_SHIFT               4
+#define         DC_LB_DISP1_END_ADR_MASK                0x00007FF0
+#define D1MODE_PRIORITY_A_CNT           0x6548
+#define         MODE_PRIORITY_MARK_MASK                 0x00007FFF
+#define         MODE_PRIORITY_OFF                       (1 << 16)
+#define         MODE_PRIORITY_ALWAYS_ON                 (1 << 20)
+#define         MODE_PRIORITY_FORCE_MASK                (1 << 24)
+#define D1MODE_PRIORITY_B_CNT           0x654C
+#define LB_MAX_REQ_OUTSTANDING          0x6D58
+#define         LB_D1_MAX_REQ_OUTSTANDING_MASK          0x0000000F
+#define         LB_D1_MAX_REQ_OUTSTANDING_SHIFT         0
+#define         LB_D2_MAX_REQ_OUTSTANDING_MASK          0x000F0000
+#define         LB_D2_MAX_REQ_OUTSTANDING_SHIFT         16
+#define D2MODE_PRIORITY_A_CNT           0x6D48
+#define D2MODE_PRIORITY_B_CNT           0x6D4C
+
+/* ix[MC] registers */
+#define MC_FB_LOCATION                  0x01
+#define         MC_FB_START_MASK                        0x0000FFFF
+#define         MC_FB_START_SHIFT                       0
+#define         MC_FB_TOP_MASK                          0xFFFF0000
+#define         MC_FB_TOP_SHIFT                         16
+#define MC_AGP_LOCATION                 0x02
+#define         MC_AGP_START_MASK                       0x0000FFFF
+#define         MC_AGP_START_SHIFT                      0
+#define         MC_AGP_TOP_MASK                         0xFFFF0000
+#define         MC_AGP_TOP_SHIFT                        16
+#define MC_AGP_BASE                     0x03
+#define MC_AGP_BASE_2                   0x04
+#define MC_CNTL                         0x5
+#define         MEM_NUM_CHANNELS_MASK                   0x00000003
+#define MC_STATUS                       0x08
+#define         MC_STATUS_IDLE                          (1 << 4)
+#define MC_MISC_LAT_TIMER               0x09
+#define         MC_CPR_INIT_LAT_MASK                    0x0000000F
+#define         MC_VF_INIT_LAT_MASK                     0x000000F0
+#define         MC_DISP0R_INIT_LAT_MASK                 0x00000F00
+#define         MC_DISP0R_INIT_LAT_SHIFT                8
+#define         MC_DISP1R_INIT_LAT_MASK                 0x0000F000
+#define         MC_DISP1R_INIT_LAT_SHIFT                12
+#define         MC_FIXED_INIT_LAT_MASK                  0x000F0000
+#define         MC_E2R_INIT_LAT_MASK                    0x00F00000
+#define         SAME_PAGE_PRIO_MASK                     0x0F000000
+#define         MC_GLOBW_INIT_LAT_MASK                  0xF0000000
+
+
+#endif
+
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index da50cc51ede3..21d8ffd57308 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -67,7 +67,7 @@ int rv770_mc_init(struct radeon_device *rdev)
                        "programming pipes. Bad things might happen.\n");
         }
 
-        tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+        tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
         tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
         tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
         WREG32(R700_MC_VM_FB_LOCATION, tmp);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c1c407f7cca3..6538d4236989 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -43,7 +43,6 @@
 #define TTM_BO_HASH_ORDER 13
 
 static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
-static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
 
 static inline uint32_t ttm_bo_type_flags(unsigned type)
@@ -224,6 +223,9 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc)
         TTM_ASSERT_LOCKED(&bo->mutex);
         bo->ttm = NULL;
 
+        if (bdev->need_dma32)
+                page_flags |= TTM_PAGE_FLAG_DMA32;
+
         switch (bo->type) {
         case ttm_bo_type_device:
                 if (zero_alloc)
@@ -304,6 +306,9 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
 
         }
 
+        if (bdev->driver->move_notify)
+                bdev->driver->move_notify(bo, mem);
+
         if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
             !(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
                 ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
@@ -655,31 +660,52 @@ retry_pre_get:
         return 0;
 }
 
+static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
+                                      uint32_t cur_placement,
+                                      uint32_t proposed_placement)
+{
+        uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING;
+        uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING;
+
+        /**
+         * Keep current caching if possible.
+         */
+
+        if ((cur_placement & caching) != 0)
+                result |= (cur_placement & caching);
+        else if ((man->default_caching & caching) != 0)
+                result |= man->default_caching;
+        else if ((TTM_PL_FLAG_CACHED & caching) != 0)
+                result |= TTM_PL_FLAG_CACHED;
+        else if ((TTM_PL_FLAG_WC & caching) != 0)
+                result |= TTM_PL_FLAG_WC;
+        else if ((TTM_PL_FLAG_UNCACHED & caching) != 0)
+                result |= TTM_PL_FLAG_UNCACHED;
+
+        return result;
+}
+
+
 static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
                                  bool disallow_fixed,
                                  uint32_t mem_type,
-                                 uint32_t mask, uint32_t *res_mask)
+                                 uint32_t proposed_placement,
+                                 uint32_t *masked_placement)
 {
         uint32_t cur_flags = ttm_bo_type_flags(mem_type);
 
         if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
                 return false;
 
-        if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+        if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0)
                 return false;
 
-        if ((mask & man->available_caching) == 0)
+        if ((proposed_placement & man->available_caching) == 0)
                 return false;
-        if (mask & man->default_caching)
-                cur_flags |= man->default_caching;
-        else if (mask & TTM_PL_FLAG_CACHED)
-                cur_flags |= TTM_PL_FLAG_CACHED;
-        else if (mask & TTM_PL_FLAG_WC)
-                cur_flags |= TTM_PL_FLAG_WC;
-        else
-                cur_flags |= TTM_PL_FLAG_UNCACHED;
 
-        *res_mask = cur_flags;
+        cur_flags |= (proposed_placement & man->available_caching);
+
+        *masked_placement = cur_flags;
         return true;
 }
 
@@ -723,6 +749,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
                 if (!type_ok)
                         continue;
 
+                cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+                                                  cur_flags);
+
                 if (mem_type == TTM_PL_SYSTEM)
                         break;
 
@@ -779,6 +808,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
                                           proposed_placement, &cur_flags))
                         continue;
 
+                cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+                                                  cur_flags);
+
                 ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
                                              interruptible, no_wait);
 
@@ -1305,7 +1337,8 @@ EXPORT_SYMBOL(ttm_bo_device_release);
 
 int ttm_bo_device_init(struct ttm_bo_device *bdev,
                        struct ttm_mem_global *mem_glob,
-                       struct ttm_bo_driver *driver, uint64_t file_page_offset)
+                       struct ttm_bo_driver *driver, uint64_t file_page_offset,
+                       bool need_dma32)
 {
         int ret = -EINVAL;
 
@@ -1342,6 +1375,7 @@ int ttm_bo_device_init(struct ttm_bo_device *bdev,
         INIT_LIST_HEAD(&bdev->ddestroy);
         INIT_LIST_HEAD(&bdev->swap_lru);
         bdev->dev_mapping = NULL;
+        bdev->need_dma32 = need_dma32;
         ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
         ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
         if (unlikely(ret != 0)) {
@@ -1419,6 +1453,7 @@ void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo)
 
         unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
 }
+EXPORT_SYMBOL(ttm_bo_unmap_virtual);
 
 static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
 {
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index bdec583901eb..ce2e6f38ea01 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -136,7 +136,8 @@ static int ttm_copy_io_page(void *dst, void *src, unsigned long page)
 }
 
 static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
-                                unsigned long page)
+                                unsigned long page,
+                                pgprot_t prot)
 {
         struct page *d = ttm_tt_get_page(ttm, page);
         void *dst;
@@ -145,17 +146,35 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
                 return -ENOMEM;
 
         src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
-        dst = kmap(d);
+
+#ifdef CONFIG_X86
+        dst = kmap_atomic_prot(d, KM_USER0, prot);
+#else
+        if (prot != PAGE_KERNEL)
+                dst = vmap(&d, 1, 0, prot);
+        else
+                dst = kmap(d);
+#endif
         if (!dst)
                 return -ENOMEM;
 
         memcpy_fromio(dst, src, PAGE_SIZE);
-        kunmap(d);
+
+#ifdef CONFIG_X86
+        kunmap_atomic(dst, KM_USER0);
+#else
+        if (prot != PAGE_KERNEL)
+                vunmap(dst);
+        else
+                kunmap(d);
+#endif
+
         return 0;
 }
 
 static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
-                                unsigned long page)
+                                unsigned long page,
+                                pgprot_t prot)
 {
         struct page *s = ttm_tt_get_page(ttm, page);
         void *src;
@@ -164,12 +183,28 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
                 return -ENOMEM;
 
         dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
-        src = kmap(s);
+#ifdef CONFIG_X86
+        src = kmap_atomic_prot(s, KM_USER0, prot);
+#else
+        if (prot != PAGE_KERNEL)
+                src = vmap(&s, 1, 0, prot);
+        else
+                src = kmap(s);
+#endif
         if (!src)
                 return -ENOMEM;
 
         memcpy_toio(dst, src, PAGE_SIZE);
-        kunmap(s);
+
+#ifdef CONFIG_X86
+        kunmap_atomic(src, KM_USER0);
+#else
+        if (prot != PAGE_KERNEL)
+                vunmap(src);
+        else
+                kunmap(s);
+#endif
+
         return 0;
 }
 
@@ -214,11 +249,17 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 
         for (i = 0; i < new_mem->num_pages; ++i) {
                 page = i * dir + add;
-                if (old_iomap == NULL)
-                        ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
-                else if (new_iomap == NULL)
-                        ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
-                else
+                if (old_iomap == NULL) {
+                        pgprot_t prot = ttm_io_prot(old_mem->placement,
+                                                    PAGE_KERNEL);
+                        ret = ttm_copy_ttm_io_page(ttm, new_iomap, page,
+                                                   prot);
+                } else if (new_iomap == NULL) {
+                        pgprot_t prot = ttm_io_prot(new_mem->placement,
+                                                    PAGE_KERNEL);
+                        ret = ttm_copy_io_ttm_page(ttm, old_iomap, page,
+                                                   prot);
+                } else
                         ret = ttm_copy_io_page(new_iomap, old_iomap, page);
                 if (ret)
                         goto out1;
@@ -509,8 +550,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
         if (evict) {
                 ret = ttm_bo_wait(bo, false, false, false);
                 spin_unlock(&bo->lock);
-                driver->sync_obj_unref(&bo->sync_obj);
-
+                if (tmp_obj)
+                        driver->sync_obj_unref(&tmp_obj);
                 if (ret)
                         return ret;
 
@@ -532,6 +573,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
 
                 set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
                 spin_unlock(&bo->lock);
+                if (tmp_obj)
+                        driver->sync_obj_unref(&tmp_obj);
 
                 ret = ttm_buffer_object_transfer(bo, &ghost_obj);
                 if (ret)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 40b75032ea47..33de7637c0c6 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -101,6 +101,9 @@ static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
                 return VM_FAULT_NOPAGE;
         }
 
+        if (bdev->driver->fault_reserve_notify)
+                bdev->driver->fault_reserve_notify(bo);
+
         /*
          * Wait for buffer data in transit, due to a pipelined
          * move.
@@ -327,7 +330,7 @@ ssize_t ttm_bo_io(struct ttm_bo_device *bdev, struct file *filp,
                 goto out_unref;
 
         kmap_offset = dev_offset - bo->vm_node->start;
-        if (unlikely(kmap_offset) >= bo->num_pages) {
+        if (unlikely(kmap_offset >= bo->num_pages)) {
                 ret = -EFBIG;
                 goto out_unref;
         }
@@ -401,7 +404,7 @@ ssize_t ttm_bo_fbdev_io(struct ttm_buffer_object *bo, const char __user *wbuf,
         bool dummy;
 
         kmap_offset = (*f_pos >> PAGE_SHIFT);
-        if (unlikely(kmap_offset) >= bo->num_pages)
+        if (unlikely(kmap_offset >= bo->num_pages))
                 return -EFBIG;
 
         page_offset = *f_pos & ~PAGE_MASK;
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 75dc8bd24592..b8b6c4a5f983 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -86,10 +86,16 @@ void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages)
         unsigned long i;
 
         for (i = 0; i < num_pages; ++i) {
-                if (pages[i]) {
-                        unsigned long start = (unsigned long)page_address(pages[i]);
-                        flush_dcache_range(start, start + PAGE_SIZE);
-                }
+                struct page *page = pages[i];
+                void *page_virtual;
+
+                if (unlikely(page == NULL))
+                        continue;
+
+                page_virtual = kmap_atomic(page, KM_USER0);
+                flush_dcache_range((unsigned long) page_virtual,
+                                   (unsigned long) page_virtual + PAGE_SIZE);
+                kunmap_atomic(page_virtual, KM_USER0);
         }
 #else
         if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
@@ -131,10 +137,17 @@ static void ttm_tt_free_page_directory(struct ttm_tt *ttm)
 
 static struct page *ttm_tt_alloc_page(unsigned page_flags)
 {
+        gfp_t gfp_flags = GFP_USER;
+
         if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
-                return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+                gfp_flags |= __GFP_ZERO;
+
+        if (page_flags & TTM_PAGE_FLAG_DMA32)
+                gfp_flags |= __GFP_DMA32;
+        else
+                gfp_flags |= __GFP_HIGHMEM;
 
-        return alloc_page(GFP_HIGHUSER);
+        return alloc_page(gfp_flags);
 }
 
 static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c
index c248c1d37268..5935b8842e86 100644
--- a/drivers/gpu/drm/via/via_irq.c
+++ b/drivers/gpu/drm/via/via_irq.c
@@ -183,7 +183,7 @@ int via_enable_vblank(struct drm_device *dev, int crtc)
         }
 
         status = VIA_READ(VIA_REG_INTERRUPT);
-        VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+        VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_VBLANK_ENABLE);
 
         VIA_WRITE8(0x83d4, 0x11);
         VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
@@ -194,6 +194,10 @@ int via_enable_vblank(struct drm_device *dev, int crtc)
 void via_disable_vblank(struct drm_device *dev, int crtc)
 {
         drm_via_private_t *dev_priv = dev->dev_private;
+        u32 status;
+
+        status = VIA_READ(VIA_REG_INTERRUPT);
+        VIA_WRITE(VIA_REG_INTERRUPT, status & ~VIA_IRQ_VBLANK_ENABLE);
 
         VIA_WRITE8(0x83d4, 0x11);
         VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index f2c21d5d24e8..5eb10c2ce665 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1075,14 +1075,16 @@ EXPORT_SYMBOL_GPL(hid_report_raw_event);
  */
 int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int interrupt)
 {
-        struct hid_report_enum *report_enum = hid->report_enum + type;
-        struct hid_driver *hdrv = hid->driver;
+        struct hid_report_enum *report_enum;
+        struct hid_driver *hdrv;
         struct hid_report *report;
         unsigned int i;
         int ret;
 
         if (!hid || !hid->driver)
                 return -ENODEV;
+        report_enum = hid->report_enum + type;
+        hdrv = hid->driver;
 
         if (!size) {
                 dbg_hid("empty report\n");
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 76c4bbe9dccb..3c1fcb7640ab 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -22,7 +22,6 @@
 #include <linux/list.h>
 #include <linux/mm.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <asm/unaligned.h>
 #include <asm/byteorder.h>
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 9e9421525fb9..215b2addddbb 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -527,8 +527,10 @@ static noinline int hiddev_ioctl_usage(struct hiddev *hiddev, unsigned int cmd,
                         goto goodreturn;
 
                 case HIDIOCGCOLLECTIONINDEX:
+                        i = field->usage[uref->usage_index].collection_index;
+                        unlock_kernel();
                         kfree(uref_multi);
-                        return field->usage[uref->usage_index].collection_index;
+                        return i;
                 case HIDIOCGUSAGES:
                         for (i = 0; i < uref_multi->num_values; i++)
                                 uref_multi->values[i] =
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d5016691d40..2e25b7a827d3 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -702,6 +702,23 @@ config SENSORS_SHT15
           This driver can also be built as a module.  If so, the module
           will be called sht15.
 
+config SENSORS_S3C
+        tristate "S3C24XX/S3C64XX Inbuilt ADC"
+        depends on ARCH_S3C2410 || ARCH_S3C64XX
+        help
+          If you say yes here you get support for the on-board ADCs of
+          the Samsung S3C24XX or S3C64XX series of SoC
+
+          This driver can also be built as a module. If so, the module
+          will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+        bool "Include raw channel attributes in sysfs"
+        depends on SENSORS_S3C
+        help
+          Say Y here if you want to include raw copies of all the ADC
+          channels in sysfs.
+
 config SENSORS_SIS5595
         tristate "Silicon Integrated Systems Corp. SiS5595"
         depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce6bed5..7f239a247c33 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)   += pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)   += pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)   += pcf8591.o
+obj-$(CONFIG_SENSORS_S3C)       += s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)     += sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)   += sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index ad2b3431b725..7d3f15d32fdf 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -357,7 +357,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX5 Fan",           39, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
+        { 0x0014, "AB9", /* + AB9 Pro */ {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 10, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -455,7 +455,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 FAN",           37, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0018, NULL /* Unknown, need DMI string */, {
+        { 0x0018, "AB9 QuadGT", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
@@ -564,7 +564,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "AUX3 Fan",           36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x001C, NULL /* Unknown, need DMI string */, {
+        { 0x001C, "IX38 QuadGT", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR2",                1, 0, 20, 1, 0 },
                 { "DDR2 VTT",            2, 0, 10, 1, 0 },
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index bff0103610c1..fe4fa29c9219 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -593,7 +593,11 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
         sensor->data = data;
         sensor->id = flags->integer.value;
         sensor->limit1 = limit1->integer.value;
-        sensor->limit2 = limit2->integer.value;
+        if (data->old_interface)
+                sensor->limit2 = limit2->integer.value;
+        else
+                /* The upper limit is expressed as delta from lower limit */
+                sensor->limit2 = sensor->limit1 + limit2->integer.value;
 
         snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
                         "%s%d_input", base_name, start + *num);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 86142a858238..58f66be61b1f 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -418,6 +418,7 @@ static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
                 data->count = 3;
                 break;
         default:
+                mutex_unlock(&data->update_lock);
                 dev_err(&client->dev,
                         "illegal value for fan divider (%d)\n", div);
                 return -EINVAL;
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
new file mode 100644
index 000000000000..3a524f2fe493
--- /dev/null
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -0,0 +1,405 @@
+/* linux/drivers/hwmon/s3c-hwmon.c
+ *
+ * Copyright (C) 2005, 2008, 2009 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX/S3C64XX ADC hwmon support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <plat/adc.h>
+#include <plat/hwmon.h>
+
+struct s3c_hwmon_attr {
+        struct sensor_device_attribute  in;
+        struct sensor_device_attribute  label;
+        char                            in_name[12];
+        char                            label_name[12];
+};
+
+/**
+ * struct s3c_hwmon - ADC hwmon client information
+ * @lock: Access lock to serialise the conversions.
+ * @client: The client we registered with the S3C ADC core.
+ * @hwmon_dev: The hwmon device we created.
+ * @attr: The holders for the channel attributes.
+*/
+struct s3c_hwmon {
+        struct semaphore        lock;
+        struct s3c_adc_client   *client;
+        struct device           *hwmon_dev;
+
+        struct s3c_hwmon_attr   attrs[8];
+};
+
+/**
+ * s3c_hwmon_read_ch - read a value from a given adc channel.
+ * @dev: The device.
+ * @hwmon: Our state.
+ * @channel: The channel we're reading from.
+ *
+ * Read a value from the @channel with the proper locking and sleep until
+ * either the read completes or we timeout awaiting the ADC core to get
+ * back to us.
+ */
+static int s3c_hwmon_read_ch(struct device *dev,
+                             struct s3c_hwmon *hwmon, int channel)
+{
+        int ret;
+
+        ret = down_interruptible(&hwmon->lock);
+        if (ret < 0)
+                return ret;
+
+        dev_dbg(dev, "reading channel %d\n", channel);
+
+        ret = s3c_adc_read(hwmon->client, channel);
+        up(&hwmon->lock);
+
+        return ret;
+}
+
+#ifdef CONFIG_SENSORS_S3C_RAW
+/**
+ * s3c_hwmon_show_raw - show a conversion from the raw channel number.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * This show deals with the raw attribute, registered for each possible
+ * ADC channel. This does a conversion and returns the raw (un-scaled)
+ * value returned from the hardware.
+ */
+static ssize_t s3c_hwmon_show_raw(struct device *dev,
+                                  struct device_attribute *attr, char *buf)
+{
+        struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev));
+        struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
+        int ret;
+
+        ret = s3c_hwmon_read_ch(dev, adc, sa->index);
+
+        return  (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+#define DEF_ADC_ATTR(x) \
+        static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x)
+
+DEF_ADC_ATTR(0);
+DEF_ADC_ATTR(1);
+DEF_ADC_ATTR(2);
+DEF_ADC_ATTR(3);
+DEF_ADC_ATTR(4);
+DEF_ADC_ATTR(5);
+DEF_ADC_ATTR(6);
+DEF_ADC_ATTR(7);
+
+static struct attribute *s3c_hwmon_attrs[9] = {
+        &sensor_dev_attr_adc0_raw.dev_attr.attr,
+        &sensor_dev_attr_adc1_raw.dev_attr.attr,
+        &sensor_dev_attr_adc2_raw.dev_attr.attr,
+        &sensor_dev_attr_adc3_raw.dev_attr.attr,
+        &sensor_dev_attr_adc4_raw.dev_attr.attr,
+        &sensor_dev_attr_adc5_raw.dev_attr.attr,
+        &sensor_dev_attr_adc6_raw.dev_attr.attr,
+        &sensor_dev_attr_adc7_raw.dev_attr.attr,
+        NULL,
+};
+
+static struct attribute_group s3c_hwmon_attrgroup = {
+        .attrs  = s3c_hwmon_attrs,
+};
+
+static inline int s3c_hwmon_add_raw(struct device *dev)
+{
+        return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+static inline void s3c_hwmon_remove_raw(struct device *dev)
+{
+        sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+#else
+
+static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
+static inline void s3c_hwmon_remove_raw(struct device *dev) { }
+
+#endif /* CONFIG_SENSORS_S3C_RAW */
+
+/**
+ * s3c_hwmon_ch_show - show value of a given channel
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Read a value from the ADC and scale it before returning it to the
+ * caller. The scale factor is gained from the channel configuration
+ * passed via the platform data when the device was registered.
+ */
+static ssize_t s3c_hwmon_ch_show(struct device *dev,
+                                 struct device_attribute *attr,
+                                 char *buf)
+{
+        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+        struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
+        struct s3c_hwmon_pdata *pdata = dev->platform_data;
+        struct s3c_hwmon_chcfg *cfg;
+        int ret;
+
+        cfg = pdata->in[sen_attr->index];
+
+        ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
+        if (ret < 0)
+                return ret;
+
+        ret *= cfg->mult;
+        ret = DIV_ROUND_CLOSEST(ret, cfg->div);
+
+        return snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+/**
+ * s3c_hwmon_label_show - show label name of the given channel.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Return the label name of a given channel
+ */
+static ssize_t s3c_hwmon_label_show(struct device *dev,
+                                    struct device_attribute *attr,
+                                    char *buf)
+{
+        struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+        struct s3c_hwmon_pdata *pdata = dev->platform_data;
+        struct s3c_hwmon_chcfg *cfg;
+
+        cfg = pdata->in[sen_attr->index];
+
+        return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
+}
+
+/**
+ * s3c_hwmon_create_attr - create hwmon attribute for given channel.
+ * @dev: The device to create the attribute on.
+ * @cfg: The channel configuration passed from the platform data.
+ * @channel: The ADC channel number to process.
+ *
+ * Create the scaled attribute for use with hwmon from the specified
+ * platform data in @pdata. The sysfs entry is handled by the routine
+ * s3c_hwmon_ch_show().
+ *
+ * The attribute name is taken from the configuration data if present
+ * otherwise the name is taken by concatenating in_ with the channel
+ * number.
+ */
+static int s3c_hwmon_create_attr(struct device *dev,
+                                 struct s3c_hwmon_chcfg *cfg,
+                                 struct s3c_hwmon_attr *attrs,
+                                 int channel)
+{
+        struct sensor_device_attribute *attr;
+        int ret;
+
+        snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);
+
+        attr = &attrs->in;
+        attr->index = channel;
+        attr->dev_attr.attr.name  = attrs->in_name;
+        attr->dev_attr.attr.mode  = S_IRUGO;
+        attr->dev_attr.attr.owner = THIS_MODULE;
+        attr->dev_attr.show = s3c_hwmon_ch_show;
+
+        ret =  device_create_file(dev, &attr->dev_attr);
+        if (ret < 0) {
+                dev_err(dev, "failed to create input attribute\n");
+                return ret;
+        }
+
+        /* if this has a name, add a label */
+        if (cfg->name) {
+                snprintf(attrs->label_name, sizeof(attrs->label_name),
+                         "in%d_label", channel);
+
+                attr = &attrs->label;
+                attr->index = channel;
+                attr->dev_attr.attr.name  = attrs->label_name;
+                attr->dev_attr.attr.mode  = S_IRUGO;
+                attr->dev_attr.attr.owner = THIS_MODULE;
+                attr->dev_attr.show = s3c_hwmon_label_show;
+
+                ret = device_create_file(dev, &attr->dev_attr);
+                if (ret < 0) {
+                        device_remove_file(dev, &attrs->in.dev_attr);
+                        dev_err(dev, "failed to create label attribute\n");
+                }
+        }
+
+        return ret;
+}
+
+static void s3c_hwmon_remove_attr(struct device *dev,
+                                  struct s3c_hwmon_attr *attrs)
+{
+        device_remove_file(dev, &attrs->in.dev_attr);
+        device_remove_file(dev, &attrs->label.dev_attr);
+}
+
+/**
+ * s3c_hwmon_probe - device probe entry.
+ * @dev: The device being probed.
+*/
+static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+{
+        struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+        struct s3c_hwmon *hwmon;
+        int ret = 0;
+        int i;
+
+        if (!pdata) {
+                dev_err(&dev->dev, "no platform data supplied\n");
+                return -EINVAL;
+        }
+
+        hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL);
+        if (hwmon == NULL) {
+                dev_err(&dev->dev, "no memory\n");
+                return -ENOMEM;
+        }
+
+        platform_set_drvdata(dev, hwmon);
+
+        init_MUTEX(&hwmon->lock);
+
+        /* Register with the core ADC driver. */
+
+        hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
+        if (IS_ERR(hwmon->client)) {
+                dev_err(&dev->dev, "cannot register adc\n");
+                ret = PTR_ERR(hwmon->client);
+                goto err_mem;
+        }
+
+        /* add attributes for our adc devices. */
+
+        ret = s3c_hwmon_add_raw(&dev->dev);
+        if (ret)
+                goto err_registered;
+
+        /* register with the hwmon core */
+
+        hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
+        if (IS_ERR(hwmon->hwmon_dev)) {
+                dev_err(&dev->dev, "error registering with hwmon\n");
+                ret = PTR_ERR(hwmon->hwmon_dev);
+                goto err_raw_attribute;
+        }
+
+        for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
+                if (!pdata->in[i])
+                        continue;
+
+                if (pdata->in[i]->mult >= 0x10000)
+                        dev_warn(&dev->dev,
+                                 "channel %d multiplier too large\n",
+                                 i);
+
+                ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
+                                            &hwmon->attrs[i], i);
+                if (ret) {
+                        dev_err(&dev->dev,
+                                        "error creating channel %d\n", i);
+
+                        for (i--; i >= 0; i--)
+                                s3c_hwmon_remove_attr(&dev->dev,
+                                                              &hwmon->attrs[i]);
+
+                        goto err_hwmon_register;
+                }
+        }
+
+        return 0;
+
+ err_hwmon_register:
+        hwmon_device_unregister(hwmon->hwmon_dev);
+
+ err_raw_attribute:
+        s3c_hwmon_remove_raw(&dev->dev);
+
+ err_registered:
+        s3c_adc_release(hwmon->client);
+
+ err_mem:
+        kfree(hwmon);
+        return ret;
+}
+
+static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+{
+        struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
+        int i;
+
+        s3c_hwmon_remove_raw(&dev->dev);
+
+        for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
+                s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);
+
+        hwmon_device_unregister(hwmon->hwmon_dev);
+        s3c_adc_release(hwmon->client);
+
+        return 0;
+}
+
+static struct platform_driver s3c_hwmon_driver = {
+        .driver = {
+                .name           = "s3c-hwmon",
+                .owner          = THIS_MODULE,
+        },
+        .probe          = s3c_hwmon_probe,
+        .remove         = __devexit_p(s3c_hwmon_remove),
+};
+
+static int __init s3c_hwmon_init(void)
+{
+        return platform_driver_register(&s3c_hwmon_driver);
+}
+
+static void __exit s3c_hwmon_exit(void)
+{
+        platform_driver_unregister(&s3c_hwmon_driver);
+}
+
+module_init(s3c_hwmon_init);
+module_exit(s3c_hwmon_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C ADC HWMon driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-hwmon");
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 56cd6004da36..6290a259456e 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -257,7 +257,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
                                  (data->flag == SHT15_READING_NOTHING),
                                  msecs_to_jiffies(timeout_msecs));
         if (ret == 0) {/* timeout occurred */
-                disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+                disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
                 sht15_connection_reset(data);
                 return -ETIME;
         }
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index a92dbb97ee99..ba75bfcf14ce 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -86,6 +86,7 @@ superio_exit(void)
 #define SUPERIO_REG_ACT         0x30
 #define SUPERIO_REG_BASE        0x60
 #define SUPERIO_REG_DEVID       0x20
+#define SUPERIO_REG_DEVREV      0x21
 
 /* Logical device registers */
 
@@ -429,6 +430,9 @@ static int __init smsc47m1_find(unsigned short *addr,
          * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
          * supports a 3rd fan, and the pin configuration registers are
          * unfortunately different.
+         * The LPC47M233 has the same device id (0x6B) but is not compatible.
+         * We check the high bit of the device revision register to
+         * differentiate them.
          */
         switch (val) {
         case 0x51:
@@ -448,6 +452,13 @@ static int __init smsc47m1_find(unsigned short *addr,
                 sio_data->type = smsc47m1;
                 break;
         case 0x6B:
+                if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+                        pr_debug(DRVNAME ": "
+                                 "Found SMSC LPC47M233, unsupported\n");
+                        superio_exit();
+                        return -ENODEV;
+                }
+
                 pr_info(DRVNAME ": Found SMSC LPC47M292\n");
                 sio_data->type = smsc47m2;
                 break;
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 3fae3a91ce5b..c89687a10835 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -187,6 +187,11 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
         davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
         davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
 
+        /* Respond at reserved "SMBus Host" slave address" (and zero);
+         * we seem to have no option to not respond...
+         */
+        davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
+
         dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
         dev_dbg(dev->dev, "PSC  = %d\n",
                 davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
@@ -387,7 +392,7 @@ static void terminate_write(struct davinci_i2c_dev *dev)
         davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
 
         if (!dev->terminate)
-                dev_err(dev->dev, "TDR IRQ while no data to send\n");
+                dev_dbg(dev->dev, "TDR IRQ while no data to send\n");
 }
 
 /*
@@ -473,9 +478,14 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id)
                         break;
 
                 case DAVINCI_I2C_IVR_AAS:
-                        dev_warn(dev->dev, "Address as slave interrupt\n");
-                }/* switch */
-        }/* while */
+                        dev_dbg(dev->dev, "Address as slave interrupt\n");
+                        break;
+
+                default:
+                        dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat);
+                        break;
+                }
+        }
 
         return count ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -505,7 +515,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
                 return -ENODEV;
         }
 
-        ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+        ioarea = request_mem_region(mem->start, resource_size(mem),
                                     pdev->name);
         if (!ioarea) {
                 dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -523,7 +533,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
         dev->irq = irq->start;
         platform_set_drvdata(pdev, dev);
 
-        dev->clk = clk_get(&pdev->dev, "I2CCLK");
+        dev->clk = clk_get(&pdev->dev, NULL);
         if (IS_ERR(dev->clk)) {
                 r = -ENODEV;
                 goto err_free_mem;
@@ -568,7 +578,7 @@ err_free_mem:
         put_device(&pdev->dev);
         kfree(dev);
 err_release_region:
-        release_mem_region(mem->start, (mem->end - mem->start) + 1);
+        release_mem_region(mem->start, resource_size(mem));
 
         return r;
 }
@@ -591,7 +601,7 @@ static int davinci_i2c_remove(struct platform_device *pdev)
         kfree(dev);
 
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        release_mem_region(mem->start, (mem->end - mem->start) + 1);
+        release_mem_region(mem->start, resource_size(mem));
         return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index ad8d2010c921..d258b02aef44 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -672,9 +672,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
                         break;
                 }
 
+                err = 0;
+complete:
                 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 
-                err = 0;
                 if (stat & OMAP_I2C_STAT_NACK) {
                         err |= OMAP_I2C_STAT_NACK;
                         omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -685,16 +686,19 @@ omap_i2c_isr(int this_irq, void *dev_id)
                         err |= OMAP_I2C_STAT_AL;
                 }
                 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
-                                        OMAP_I2C_STAT_AL))
+                                        OMAP_I2C_STAT_AL)) {
                         omap_i2c_complete_cmd(dev, err);
+                        return IRQ_HANDLED;
+                }
                 if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
                         u8 num_bytes = 1;
                         if (dev->fifo_size) {
                                 if (stat & OMAP_I2C_STAT_RRDY)
                                         num_bytes = dev->fifo_size;
-                                else
-                                        num_bytes = omap_i2c_read_reg(dev,
-                                                        OMAP_I2C_BUFSTAT_REG);
+                                else    /* read RXSTAT on RDR interrupt */
+                                        num_bytes = (omap_i2c_read_reg(dev,
+                                                        OMAP_I2C_BUFSTAT_REG)
+                                                        >> 8) & 0x3F;
                         }
                         while (num_bytes) {
                                 num_bytes--;
@@ -731,9 +735,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
                         if (dev->fifo_size) {
                                 if (stat & OMAP_I2C_STAT_XRDY)
                                         num_bytes = dev->fifo_size;
-                                else
+                                else    /* read TXSTAT on XDR interrupt */
                                         num_bytes = omap_i2c_read_reg(dev,
-                                                        OMAP_I2C_BUFSTAT_REG);
+                                                        OMAP_I2C_BUFSTAT_REG)
+                                                        & 0x3F;
                         }
                         while (num_bytes) {
                                 num_bytes--;
@@ -760,6 +765,27 @@ omap_i2c_isr(int this_irq, void *dev_id)
                                                         "data to send\n");
                                         break;
                                 }
+
+                                /*
+                                 * OMAP3430 Errata 1.153: When an XRDY/XDR
+                                 * is hit, wait for XUDF before writing data
+                                 * to DATA_REG. Otherwise some data bytes can
+                                 * be lost while transferring them from the
+                                 * memory to the I2C interface.
+                                 */
+
+                                if (cpu_is_omap34xx()) {
+                                                while (!(stat & OMAP_I2C_STAT_XUDF)) {
+                                                        if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+                                                                omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+                                                                err |= OMAP_I2C_STAT_XUDF;
+                                                                goto complete;
+                                                        }
+                                                        cpu_relax();
+                                                        stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+                                                }
+                                }
+
                                 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
                         }
                         omap_i2c_ack_stat(dev,
@@ -806,7 +832,7 @@ omap_i2c_probe(struct platform_device *pdev)
                 return -ENODEV;
         }
 
-        ioarea = request_mem_region(mem->start, (mem->end - mem->start) + 1,
+        ioarea = request_mem_region(mem->start, resource_size(mem),
                         pdev->name);
         if (!ioarea) {
                 dev_err(&pdev->dev, "I2C region already claimed\n");
@@ -879,7 +905,7 @@ omap_i2c_probe(struct platform_device *pdev)
         i2c_set_adapdata(adap, dev);
         adap->owner = THIS_MODULE;
         adap->class = I2C_CLASS_HWMON;
-        strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+        strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
         adap->algo = &omap_i2c_algo;
         adap->dev.parent = &pdev->dev;
 
@@ -905,7 +931,7 @@ err_free_mem:
         platform_set_drvdata(pdev, NULL);
         kfree(dev);
 err_release_region:
-        release_mem_region(mem->start, (mem->end - mem->start) + 1);
+        release_mem_region(mem->start, resource_size(mem));
 
         return r;
 }
@@ -925,7 +951,7 @@ omap_i2c_remove(struct platform_device *pdev)
         iounmap(dev->base);
         kfree(dev);
         mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        release_mem_region(mem->start, (mem->end - mem->start) + 1);
+        release_mem_region(mem->start, resource_size(mem));
         return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 8f42a4536cdf..20bb0ceb027b 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -763,11 +763,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
 
-        /* check for s3c2440 i2c controller  */
-
-        if (s3c24xx_i2c_is2440(i2c))
-                writel(0x0, i2c->regs + S3C2440_IICLC);
-
         return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 1c01083b01b5..820487d0d5c7 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -563,7 +563,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
                 goto err_irq;
         }
 
-        size = (res->end - res->start) + 1;
+        size = resource_size(res);
 
         pd->reg = ioremap(res->start, size);
         if (pd->reg == NULL) {
@@ -637,7 +637,7 @@ static void __exit sh_mobile_i2c_adap_exit(void)
         platform_driver_unregister(&sh_mobile_i2c_driver);
 }
 
-module_init(sh_mobile_i2c_adap_init);
+subsys_initcall(sh_mobile_i2c_adap_init);
 module_exit(sh_mobile_i2c_adap_exit);
 
 MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 042fda295f3a..6407f47bda82 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -92,7 +92,7 @@ static int simtec_i2c_probe(struct platform_device *dev)
                 goto err;
         }
 
-        size = (res->end-res->start)+1;
+        size = resource_size(res);
 
         pd->ioarea = request_mem_region(res->start, size, dev->name);
         if (pd->ioarea == NULL) {
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index 1a9cc135219f..b96f3025e588 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -27,7 +27,7 @@
 #include <linux/delay.h>
 
 #define TSL2550_DRV_NAME        "tsl2550"
-#define DRIVER_VERSION          "1.1.1"
+#define DRIVER_VERSION          "1.1.2"
 
 /*
  * Defines
@@ -189,13 +189,16 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
         u8 r = 128;
 
         /* Avoid division by 0 and count 1 cannot be greater than count 0 */
-        if (c0 && (c1 <= c0))
-                r = c1 * 128 / c0;
+        if (c1 <= c0)
+                if (c0) {
+                        r = c1 * 128 / c0;
+
+                        /* Calculate LUX */
+                        lux = ((c0 - c1) * ratio_lut[r]) / 256;
+                } else
+                        lux = 0;
         else
-                return -1;
-
-        /* Calculate LUX */
-        lux = ((c0 - c1) * ratio_lut[r]) / 256;
+                return -EAGAIN;
 
         /* LUX range check */
         return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 695181120cdb..7f878017b736 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -455,6 +455,7 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
 
         rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
         rq->special = cmd;
+        cmd->rq = rq;
 }
 
 ide_devset_get(multcount, mult_count);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 013dc595fab6..bc5fb12b913c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1064,6 +1064,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd,
                 tape->best_dsc_rw_freq = config.dsc_rw_frequency;
                 break;
         case 0x0350:
+                memset(&config, 0, sizeof(config));
                 config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq;
                 config.nr_stages = 1;
                 if (copy_to_user(argp, &config, sizeof(config)))
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 114efd8dc8f5..1148140d08a1 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -608,8 +608,7 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
                                                     p, compat_mode);
 
                         if (_IOC_NR(cmd) == _IOC_NR(EVIOCGNAME(0)))
-                                return str_to_user(dev_name(&evdev->dev),
-                                                   _IOC_SIZE(cmd), p);
+                                return str_to_user(dev->name, _IOC_SIZE(cmd), p);
 
                         if (_IOC_NR(cmd) == _IOC_NR(EVIOCGPHYS(0)))
                                 return str_to_user(dev->phys, _IOC_SIZE(cmd), p);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 0e12f89276a3..4cfd084fa897 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -536,7 +536,7 @@ static int joydev_ioctl_common(struct joydev *joydev,
         default:
                 if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) {
                         int len;
-                        const char *name = dev_name(&dev->dev);
+                        const char *name = dev->name;
 
                         if (!name)
                                 return 0;
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b868b8d5fbb3..f155ad8cdae7 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -470,20 +470,20 @@ static void xpad_irq_out(struct urb *urb)
         status = urb->status;
 
         switch (status) {
-                case 0:
+        case 0:
                 /* success */
-                break;
-                case -ECONNRESET:
-                case -ENOENT:
-                case -ESHUTDOWN:
-                        /* this urb is terminated, clean up */
-                        dbg("%s - urb shutting down with status: %d",
-                                __func__, status);
-                        return;
-                default:
-                        dbg("%s - nonzero urb status received: %d",
-                                __func__, status);
-                        goto exit;
+                return;
+
+        case -ECONNRESET:
+        case -ENOENT:
+        case -ESHUTDOWN:
+                /* this urb is terminated, clean up */
+                dbg("%s - urb shutting down with status: %d", __func__, status);
+                return;
+
+        default:
+                dbg("%s - nonzero urb status received: %d", __func__, status);
+                goto exit;
         }
 
 exit:
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index df3f8aa68115..95fe0452dae4 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -895,6 +895,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
 };
 
 /*
+ * Amilo Pi 3525 key release for Fn+Volume keys not working
+ */
+static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = {
+        0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U
+};
+
+/*
  * Amilo Xi 3650 key release for light touch bar not working
  */
 static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
@@ -902,6 +909,13 @@ static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
 };
 
 /*
+ * Soltech TA12 system with broken key release on volume keys and mute key
+ */
+static unsigned int atkdb_soltech_ta12_forced_release_keys[] = {
+        0xa0, 0xae, 0xb0, -1U
+};
+
+/*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
  */
@@ -1568,6 +1582,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
                 .driver_data = atkbd_amilo_pa1510_forced_release_keys,
         },
         {
+                .ident = "Fujitsu Amilo Pi 3525",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
+                },
+                .callback = atkbd_setup_forced_release,
+                .driver_data = atkbd_amilo_pi3525_forced_release_keys,
+        },
+        {
                 .ident = "Fujitsu Amilo Xi 3650",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
@@ -1576,6 +1599,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
                 .callback = atkbd_setup_forced_release,
                 .driver_data = atkbd_amilo_xi3650_forced_release_keys,
         },
+        {
+                .ident = "Soltech Corporation TA12",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
+                },
+                .callback = atkbd_setup_forced_release,
+                .driver_data = atkdb_soltech_ta12_forced_release_keys,
+        },
         { }
 };
 
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 6d67af5387ad..21cb755a54fb 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -114,7 +114,7 @@ static int __devexit pcspkr_remove(struct platform_device *dev)
         return 0;
 }
 
-static int pcspkr_suspend(struct platform_device *dev, pm_message_t state)
+static int pcspkr_suspend(struct device *dev)
 {
         pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 
@@ -127,14 +127,18 @@ static void pcspkr_shutdown(struct platform_device *dev)
         pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 }
 
+static struct dev_pm_ops pcspkr_pm_ops = {
+        .suspend = pcspkr_suspend,
+};
+
 static struct platform_driver pcspkr_platform_driver = {
         .driver         = {
                 .name   = "pcspkr",
                 .owner  = THIS_MODULE,
+                .pm     = &pcspkr_pm_ops,
         },
         .probe          = pcspkr_probe,
         .remove         = __devexit_p(pcspkr_remove),
-        .suspend        = pcspkr_suspend,
         .shutdown       = pcspkr_shutdown,
 };
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 7c8957dd22c0..26e17a9a22eb 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -646,6 +646,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
         },
         {
                 .callback = dmi_matched,
+                .ident = "Maxdata Pro 7000 DX",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
+                },
+                .driver_data = keymap_fs_amilo_pro_v2000
+        },
+        {
+                .callback = dmi_matched,
                 .ident = "Fujitsu N3510",
                 .matches = {
                         DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 1ebfcab74662..8ff7e35c7069 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -408,6 +408,8 @@ static int if_write_room(struct tty_struct *tty)
         return retval;
 }
 
+/* FIXME: This function does not have error returns */
+
 static int if_chars_in_buffer(struct tty_struct *tty)
 {
         struct cardstate *cs;
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 8df889b0c1a9..9de54202c90c 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -37,7 +37,6 @@
 #include <linux/kernel_stat.h>
 #include <linux/usb.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
 #include "hisax.h"
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index b4d4522e5071..2881a66c1aa9 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -13,6 +13,7 @@
 
 #include <linux/isdn.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
 #include "isdn_common.h"
 #include "isdn_tty.h"
 #ifdef CONFIG_ISDN_AUDIO
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 990e6a7e6674..c3b661a666cb 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -731,10 +731,10 @@ l1oip_socket_thread(void *data)
         while (!signal_pending(current)) {
                 struct kvec iov = {
                         .iov_base = recvbuf,
-                        .iov_len = sizeof(recvbuf),
+                        .iov_len = recvbuf_size,
                 };
                 recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
-                                         sizeof(recvbuf), 0);
+                                         recvbuf_size, 0);
                 if (recvlen > 0) {
                         l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
                 } else {
diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c
index e2f45019ebf0..3e1532a180ff 100644
--- a/drivers/isdn/mISDN/stack.c
+++ b/drivers/isdn/mISDN/stack.c
@@ -17,6 +17,7 @@
 
 #include <linux/mISDNif.h>
 #include <linux/kthread.h>
+#include <linux/smp_lock.h>
 #include "core.h"
 
 static u_int    *debug;
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index a6974e9b8ebf..1e2cb846b3c9 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,6 +1,8 @@
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
  * Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something.  This file also contains useful helper routines. :*/
+ * Host to do something.  This file also contains useful helper routines.
+:*/
 #include <linux/module.h>
 #include <linux/stringify.h>
 #include <linux/stddef.h>
@@ -24,7 +26,8 @@ static struct page **switcher_page;
 /* This One Big lock protects all inter-guest data structures. */
 DEFINE_MUTEX(lguest_lock);
 
-/*H:010 We need to set up the Switcher at a high virtual address.  Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address.  Remember the
  * Switcher is a few hundred bytes of assembler code which actually changes the
  * CPU to run the Guest, and then changes back to the Host when a trap or
  * interrupt happens.
@@ -33,7 +36,8 @@ DEFINE_MUTEX(lguest_lock);
  * Host since it will be running as the switchover occurs.
  *
  * Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
 static __init int map_switcher(void)
 {
         int i, err;
@@ -47,8 +51,10 @@ static __init int map_switcher(void)
          * easy.
          */
 
-        /* We allocate an array of struct page pointers.  map_vm_area() wants
-         * this, rather than just an array of pages. */
+        /*
+         * We allocate an array of struct page pointers.  map_vm_area() wants
+         * this, rather than just an array of pages.
+         */
         switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
                                 GFP_KERNEL);
         if (!switcher_page) {
@@ -56,8 +62,10 @@ static __init int map_switcher(void)
                 goto out;
         }
 
-        /* Now we actually allocate the pages.  The Guest will see these pages,
-         * so we make sure they're zeroed. */
+        /*
+         * Now we actually allocate the pages.  The Guest will see these pages,
+         * so we make sure they're zeroed.
+         */
         for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
                 unsigned long addr = get_zeroed_page(GFP_KERNEL);
                 if (!addr) {
@@ -67,19 +75,23 @@ static __init int map_switcher(void)
                 switcher_page[i] = virt_to_page(addr);
         }
 
-        /* First we check that the Switcher won't overlap the fixmap area at
+        /*
+         * First we check that the Switcher won't overlap the fixmap area at
          * the top of memory.  It's currently nowhere near, but it could have
-         * very strange effects if it ever happened. */
+         * very strange effects if it ever happened.
+         */
         if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
                 err = -ENOMEM;
                 printk("lguest: mapping switcher would thwack fixmap\n");
                 goto free_pages;
         }
 
-        /* Now we reserve the "virtual memory area" we want: 0xFFC00000
+        /*
+         * Now we reserve the "virtual memory area" we want: 0xFFC00000
          * (SWITCHER_ADDR).  We might not get it in theory, but in practice
          * it's worked so far.  The end address needs +1 because __get_vm_area
-         * allocates an extra guard page, so we need space for that. */
+         * allocates an extra guard page, so we need space for that.
+         */
         switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
                                      VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
                                      + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
@@ -89,11 +101,13 @@ static __init int map_switcher(void)
                 goto free_pages;
         }
 
-        /* This code actually sets up the pages we've allocated to appear at
+        /*
+         * This code actually sets up the pages we've allocated to appear at
          * SWITCHER_ADDR.  map_vm_area() takes the vma we allocated above, the
          * kind of pages we're mapping (kernel pages), and a pointer to our
          * array of struct pages.  It increments that pointer, but we don't
-         * care. */
+         * care.
+         */
         pagep = switcher_page;
         err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
         if (err) {
@@ -101,8 +115,10 @@ static __init int map_switcher(void)
                 goto free_vma;
         }
 
-        /* Now the Switcher is mapped at the right address, we can't fail!
-         * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+        /*
+         * Now the Switcher is mapped at the right address, we can't fail!
+         * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+         */
         memcpy(switcher_vma->addr, start_switcher_text,
                end_switcher_text - start_switcher_text);
 
@@ -124,8 +140,7 @@ out:
 }
 /*:*/
 
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
 static void unmap_switcher(void)
 {
         unsigned int i;
@@ -151,16 +166,19 @@ static void unmap_switcher(void)
  * But we can't trust the Guest: it might be trying to access the Launcher
  * code.  We have to check that the range is below the pfn_limit the Launcher
  * gave us.  We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
 bool lguest_address_ok(const struct lguest *lg,
                        unsigned long addr, unsigned long len)
 {
         return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
 }
 
-/* This routine copies memory from the Guest.  Here we can see how useful the
+/*
+ * This routine copies memory from the Guest.  Here we can see how useful the
  * kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
 void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
 {
         if (!lguest_address_ok(cpu->lg, addr, bytes)
@@ -181,9 +199,11 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
 }
 /*:*/
 
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
  * Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 {
         /* We stop running once the Guest is dead. */
@@ -195,10 +215,17 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
                 if (cpu->hcall)
                         do_hypercalls(cpu);
 
-                /* It's possible the Guest did a NOTIFY hypercall to the
-                 * Launcher, in which case we return from the read() now. */
+                /*
+                 * It's possible the Guest did a NOTIFY hypercall to the
+                 * Launcher.
+                 */
                 if (cpu->pending_notify) {
+                        /*
+                         * Does it just needs to write to a registered
+                         * eventfd (ie. the appropriate virtqueue thread)?
+                         */
                         if (!send_notify_to_eventfd(cpu)) {
+                                /* OK, we tell the main Laucher. */
                                 if (put_user(cpu->pending_notify, user))
                                         return -EFAULT;
                                 return sizeof(cpu->pending_notify);
@@ -209,29 +236,39 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
                 if (signal_pending(current))
                         return -ERESTARTSYS;
 
-                /* Check if there are any interrupts which can be delivered now:
+                /*
+                 * Check if there are any interrupts which can be delivered now:
                  * if so, this sets up the hander to be executed when we next
-                 * run the Guest. */
+                 * run the Guest.
+                 */
                 irq = interrupt_pending(cpu, &more);
                 if (irq < LGUEST_IRQS)
                         try_deliver_interrupt(cpu, irq, more);
 
-                /* All long-lived kernel loops need to check with this horrible
+                /*
+                 * All long-lived kernel loops need to check with this horrible
                  * thing called the freezer.  If the Host is trying to suspend,
-                 * it stops us. */
+                 * it stops us.
+                 */
                 try_to_freeze();
 
-                /* Just make absolutely sure the Guest is still alive.  One of
-                 * those hypercalls could have been fatal, for example. */
+                /*
+                 * Just make absolutely sure the Guest is still alive.  One of
+                 * those hypercalls could have been fatal, for example.
+                 */
                 if (cpu->lg->dead)
                         break;
 
-                /* If the Guest asked to be stopped, we sleep.  The Guest's
-                 * clock timer will wake us. */
+                /*
+                 * If the Guest asked to be stopped, we sleep.  The Guest's
+                 * clock timer will wake us.
+                 */
                 if (cpu->halted) {
                         set_current_state(TASK_INTERRUPTIBLE);
-                        /* Just before we sleep, make sure no interrupt snuck in
-                         * which we should be doing. */
+                        /*
+                         * Just before we sleep, make sure no interrupt snuck in
+                         * which we should be doing.
+                         */
                         if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
                                 set_current_state(TASK_RUNNING);
                         else
@@ -239,8 +276,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
                         continue;
                 }
 
-                /* OK, now we're ready to jump into the Guest.  First we put up
-                 * the "Do Not Disturb" sign: */
+                /*
+                 * OK, now we're ready to jump into the Guest.  First we put up
+                 * the "Do Not Disturb" sign:
+                 */
                 local_irq_disable();
 
                 /* Actually run the Guest until something happens. */
@@ -327,8 +366,10 @@ static void __exit fini(void)
 }
 /*:*/
 
-/* The Host side of lguest can be a module.  This is a nice way for people to
- * play with it.  */
+/*
+ * The Host side of lguest can be a module.  This is a nice way for people to
+ * play with it.
+ */
 module_init(init);
 module_exit(fini);
 MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index c29ffa19cb74..83511eb0923d 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -1,8 +1,10 @@
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
  * call, the Guest requests Host operations through a "hypercall".  You might
  * notice this nomenclature doesn't really follow any logic, but the name has
  * been around for long enough that we're stuck with it.  As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
 
 /*  Copyright (C) 2006 Rusty Russell IBM Corporation
 
@@ -28,30 +30,41 @@
 #include <asm/pgtable.h>
 #include "lg.h"
 
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both.
+ */
 static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
         switch (args->arg0) {
         case LHCALL_FLUSH_ASYNC:
-                /* This call does nothing, except by breaking out of the Guest
-                 * it makes us process all the asynchronous hypercalls. */
+                /*
+                 * This call does nothing, except by breaking out of the Guest
+                 * it makes us process all the asynchronous hypercalls.
+                 */
                 break;
         case LHCALL_SEND_INTERRUPTS:
-                /* This call does nothing too, but by breaking out of the Guest
-                 * it makes us process any pending interrupts. */
+                /*
+                 * This call does nothing too, but by breaking out of the Guest
+                 * it makes us process any pending interrupts.
+                 */
                 break;
         case LHCALL_LGUEST_INIT:
-                /* You can't get here unless you're already initialized.  Don't
-                 * do that. */
+                /*
+                 * You can't get here unless you're already initialized.  Don't
+                 * do that.
+                 */
                 kill_guest(cpu, "already have lguest_data");
                 break;
         case LHCALL_SHUTDOWN: {
-                /* Shutdown is such a trivial hypercall that we do it in four
-                 * lines right here. */
                 char msg[128];
-                /* If the lgread fails, it will call kill_guest() itself; the
-                 * kill_guest() with the message will be ignored. */
+                /*
+                 * Shutdown is such a trivial hypercall that we do it in five
+                 * lines right here.
+                 *
+                 * If the lgread fails, it will call kill_guest() itself; the
+                 * kill_guest() with the message will be ignored.
+                 */
                 __lgread(cpu, msg, args->arg1, sizeof(msg));
                 msg[sizeof(msg)-1] = '\0';
                 kill_guest(cpu, "CRASH: %s", msg);
@@ -60,16 +73,17 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
                 break;
         }
         case LHCALL_FLUSH_TLB:
-                /* FLUSH_TLB comes in two flavors, depending on the
-                 * argument: */
+                /* FLUSH_TLB comes in two flavors, depending on the argument: */
                 if (args->arg1)
                         guest_pagetable_clear_all(cpu);
                 else
                         guest_pagetable_flush_user(cpu);
                 break;
 
-        /* All these calls simply pass the arguments through to the right
-         * routines. */
+        /*
+         * All these calls simply pass the arguments through to the right
+         * routines.
+         */
         case LHCALL_NEW_PGTABLE:
                 guest_new_pagetable(cpu, args->arg1);
                 break;
@@ -112,15 +126,16 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
                         kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
         }
 }
-/*:*/
 
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
  * Guest's "struct lguest_data" to see if any new ones are marked "ready".
  *
  * We are careful to do these in order: obviously we respect the order the
  * Guest put them in the ring, but we also promise the Guest that they will
  * happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
 static void do_async_hcalls(struct lg_cpu *cpu)
 {
         unsigned int i;
@@ -133,22 +148,28 @@ static void do_async_hcalls(struct lg_cpu *cpu)
         /* We process "struct lguest_data"s hcalls[] ring once. */
         for (i = 0; i < ARRAY_SIZE(st); i++) {
                 struct hcall_args args;
-                /* We remember where we were up to from last time.  This makes
+                /*
+                 * We remember where we were up to from last time.  This makes
                  * sure that the hypercalls are done in the order the Guest
-                 * places them in the ring. */
+                 * places them in the ring.
+                 */
                 unsigned int n = cpu->next_hcall;
 
                 /* 0xFF means there's no call here (yet). */
                 if (st[n] == 0xFF)
                         break;
 
-                /* OK, we have hypercall.  Increment the "next_hcall" cursor,
-                 * and wrap back to 0 if we reach the end. */
+                /*
+                 * OK, we have hypercall.  Increment the "next_hcall" cursor,
+                 * and wrap back to 0 if we reach the end.
+                 */
                 if (++cpu->next_hcall == LHCALL_RING_SIZE)
                         cpu->next_hcall = 0;
 
-                /* Copy the hypercall arguments into a local copy of
-                 * the hcall_args struct. */
+                /*
+                 * Copy the hypercall arguments into a local copy of the
+                 * hcall_args struct.
+                 */
                 if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
                                    sizeof(struct hcall_args))) {
                         kill_guest(cpu, "Fetching async hypercalls");
@@ -164,19 +185,25 @@ static void do_async_hcalls(struct lg_cpu *cpu)
                         break;
                 }
 
-                /* Stop doing hypercalls if they want to notify the Launcher:
-                 * it needs to service this first. */
+                /*
+                 * Stop doing hypercalls if they want to notify the Launcher:
+                 * it needs to service this first.
+                 */
                 if (cpu->pending_notify)
                         break;
         }
 }
 
-/* Last of all, we look at what happens first of all.  The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all.  The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
 static void initialize(struct lg_cpu *cpu)
 {
-        /* You can't do anything until you're initialized.  The Guest knows the
-         * rules, so we're unforgiving here. */
+        /*
+         * You can't do anything until you're initialized.  The Guest knows the
+         * rules, so we're unforgiving here.
+         */
         if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
                 kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
                 return;
@@ -185,32 +212,44 @@ static void initialize(struct lg_cpu *cpu)
         if (lguest_arch_init_hypercalls(cpu))
                 kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-        /* The Guest tells us where we're not to deliver interrupts by putting
-         * the range of addresses into "struct lguest_data". */
+        /*
+         * The Guest tells us where we're not to deliver interrupts by putting
+         * the range of addresses into "struct lguest_data".
+         */
         if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
             || get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
                 kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-        /* We write the current time into the Guest's data page once so it can
-         * set its clock. */
+        /*
+         * We write the current time into the Guest's data page once so it can
+         * set its clock.
+         */
         write_timestamp(cpu);
 
         /* page_tables.c will also do some setup. */
         page_table_guest_data_init(cpu);
 
-        /* This is the one case where the above accesses might have been the
+        /*
+         * This is the one case where the above accesses might have been the
          * first write to a Guest page.  This may have caused a copy-on-write
          * fault, but the old page might be (read-only) in the Guest
-         * pagetable. */
+         * pagetable.
+         */
         guest_pagetable_clear_all(cpu);
 }
 /*:*/
 
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
  * written to, and then the Launcher writes to it (ie. the output of a virtual
  * device), the Guest will still see the old page.  In practice, this never
  * happens: why would the Guest read a page which it has never written to?  But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write.  And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
 
 /*H:100
  * Hypercalls
@@ -229,17 +268,22 @@ void do_hypercalls(struct lg_cpu *cpu)
                 return;
         }
 
-        /* The Guest has initialized.
+        /*
+         * The Guest has initialized.
          *
-         * Look in the hypercall ring for the async hypercalls: */
+         * Look in the hypercall ring for the async hypercalls:
+         */
         do_async_hcalls(cpu);
 
-        /* If we stopped reading the hypercall ring because the Guest did a
+        /*
+         * If we stopped reading the hypercall ring because the Guest did a
          * NOTIFY to the Launcher, we want to return now.  Otherwise we do
-         * the hypercall. */
+         * the hypercall.
+         */
         if (!cpu->pending_notify) {
                 do_hcall(cpu, cpu->hcall);
-                /* Tricky point: we reset the hcall pointer to mark the
+                /*
+                 * Tricky point: we reset the hcall pointer to mark the
                  * hypercall as "done".  We use the hcall pointer rather than
                  * the trap number to indicate a hypercall is pending.
                  * Normally it doesn't matter: the Guest will run again and
@@ -248,13 +292,16 @@ void do_hypercalls(struct lg_cpu *cpu)
                  * However, if we are signalled or the Guest sends I/O to the
                  * Launcher, the run_guest() loop will exit without running the
                  * Guest.  When it comes back it would try to re-run the
-                 * hypercall.  Finding that bug sucked. */
+                 * hypercall.  Finding that bug sucked.
+                 */
                 cpu->hcall = NULL;
         }
 }
 
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
 void write_timestamp(struct lg_cpu *cpu)
 {
         struct timespec now;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0e9067b0d507..18648180db02 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -1,4 +1,5 @@
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
  * There are three classes of interrupts:
  *
  * 1) Real hardware interrupts which occur while we're running the Guest,
@@ -10,7 +11,8 @@
  * just like real hardware would deliver them.  Traps from the Guest can be set
  * up to go directly back into the Guest, but sometimes the Host wants to see
  * them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -26,8 +28,10 @@ static unsigned long idt_address(u32 lo, u32 hi)
         return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
 }
 
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
 static int idt_type(u32 lo, u32 hi)
 {
         return (hi >> 8) & 0xF;
@@ -39,8 +43,10 @@ static bool idt_present(u32 lo, u32 hi)
         return (hi & 0x8000);
 }
 
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
 static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
 {
         /* Stack grows upwards: move stack then write value. */
@@ -48,7 +54,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
         lgwrite(cpu, *gstack, u32, val);
 }
 
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
  * trap.  The mechanics of delivering traps and interrupts to the Guest are the
  * same, except some traps have an "error code" which gets pushed onto the
  * stack as well: the caller tells us if this is one.
@@ -59,7 +66,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
  *
  * We set up the stack just like the CPU does for a real interrupt, so it's
  * identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
 static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
                                 bool has_err)
 {
@@ -67,20 +75,26 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
         u32 eflags, ss, irq_enable;
         unsigned long virtstack;
 
-        /* There are two cases for interrupts: one where the Guest is already
+        /*
+         * There are two cases for interrupts: one where the Guest is already
          * in the kernel, and a more complex one where the Guest is in
-         * userspace.  We check the privilege level to find out. */
+         * userspace.  We check the privilege level to find out.
+         */
         if ((cpu->regs->ss&0x3) != GUEST_PL) {
-                /* The Guest told us their kernel stack with the SET_STACK
-                 * hypercall: both the virtual address and the segment */
+                /*
+                 * The Guest told us their kernel stack with the SET_STACK
+                 * hypercall: both the virtual address and the segment.
+                 */
                 virtstack = cpu->esp1;
                 ss = cpu->ss1;
 
                 origstack = gstack = guest_pa(cpu, virtstack);
-                /* We push the old stack segment and pointer onto the new
+                /*
+                 * We push the old stack segment and pointer onto the new
                  * stack: when the Guest does an "iret" back from the interrupt
                  * handler the CPU will notice they're dropping privilege
-                 * levels and expect these here. */
+                 * levels and expect these here.
+                 */
                 push_guest_stack(cpu, &gstack, cpu->regs->ss);
                 push_guest_stack(cpu, &gstack, cpu->regs->esp);
         } else {
@@ -91,18 +105,22 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
                 origstack = gstack = guest_pa(cpu, virtstack);
         }
 
-        /* Remember that we never let the Guest actually disable interrupts, so
+        /*
+         * Remember that we never let the Guest actually disable interrupts, so
          * the "Interrupt Flag" bit is always set.  We copy that bit from the
          * Guest's "irq_enabled" field into the eflags word: we saw the Guest
-         * copy it back in "lguest_iret". */
+         * copy it back in "lguest_iret".
+         */
         eflags = cpu->regs->eflags;
         if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
             && !(irq_enable & X86_EFLAGS_IF))
                 eflags &= ~X86_EFLAGS_IF;
 
-        /* An interrupt is expected to push three things on the stack: the old
+        /*
+         * An interrupt is expected to push three things on the stack: the old
          * "eflags" word, the old code segment, and the old instruction
-         * pointer. */
+         * pointer.
+         */
         push_guest_stack(cpu, &gstack, eflags);
         push_guest_stack(cpu, &gstack, cpu->regs->cs);
         push_guest_stack(cpu, &gstack, cpu->regs->eip);
@@ -111,15 +129,19 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
         if (has_err)
                 push_guest_stack(cpu, &gstack, cpu->regs->errcode);
 
-        /* Now we've pushed all the old state, we change the stack, the code
-         * segment and the address to execute. */
+        /*
+         * Now we've pushed all the old state, we change the stack, the code
+         * segment and the address to execute.
+         */
         cpu->regs->ss = ss;
         cpu->regs->esp = virtstack + (gstack - origstack);
         cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
         cpu->regs->eip = idt_address(lo, hi);
 
-        /* There are two kinds of interrupt handlers: 0xE is an "interrupt
-         * gate" which expects interrupts to be disabled on entry. */
+        /*
+         * There are two kinds of interrupt handlers: 0xE is an "interrupt
+         * gate" which expects interrupts to be disabled on entry.
+         */
         if (idt_type(lo, hi) == 0xE)
                 if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
                         kill_guest(cpu, "Disabling interrupts");
@@ -130,7 +152,8 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
  *
  * interrupt_pending() returns the first pending interrupt which isn't blocked
  * by the Guest.  It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
 unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
         unsigned int irq;
@@ -140,8 +163,10 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
         if (!cpu->lg->lguest_data)
                 return LGUEST_IRQS;
 
-        /* Take our "irqs_pending" array and remove any interrupts the Guest
-         * wants blocked: the result ends up in "blk". */
+        /*
+         * Take our "irqs_pending" array and remove any interrupts the Guest
+         * wants blocked: the result ends up in "blk".
+         */
         if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
                            sizeof(blk)))
                 return LGUEST_IRQS;
@@ -154,16 +179,20 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
         return irq;
 }
 
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
 void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 {
         struct desc_struct *idt;
 
         BUG_ON(irq >= LGUEST_IRQS);
 
-        /* They may be in the middle of an iret, where they asked us never to
-         * deliver interrupts. */
+        /*
+         * They may be in the middle of an iret, where they asked us never to
+         * deliver interrupts.
+         */
         if (cpu->regs->eip >= cpu->lg->noirq_start &&
            (cpu->regs->eip < cpu->lg->noirq_end))
                 return;
@@ -187,29 +216,37 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
                 }
         }
 
-        /* Look at the IDT entry the Guest gave us for this interrupt.  The
+        /*
+         * Look at the IDT entry the Guest gave us for this interrupt.  The
          * first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
-         * over them. */
+         * over them.
+         */
         idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
         /* If they don't have a handler (yet?), we just ignore it */
         if (idt_present(idt->a, idt->b)) {
                 /* OK, mark it no longer pending and deliver it. */
                 clear_bit(irq, cpu->irqs_pending);
-                /* set_guest_interrupt() takes the interrupt descriptor and a
+                /*
+                 * set_guest_interrupt() takes the interrupt descriptor and a
                  * flag to say whether this interrupt pushes an error code onto
-                 * the stack as well: virtual interrupts never do. */
+                 * the stack as well: virtual interrupts never do.
+                 */
                 set_guest_interrupt(cpu, idt->a, idt->b, false);
         }
 
-        /* Every time we deliver an interrupt, we update the timestamp in the
+        /*
+         * Every time we deliver an interrupt, we update the timestamp in the
          * Guest's lguest_data struct.  It would be better for the Guest if we
          * did this more often, but it can actually be quite slow: doing it
          * here is a compromise which means at least it gets updated every
-         * timer interrupt. */
+         * timer interrupt.
+         */
         write_timestamp(cpu);
 
-        /* If there are no other interrupts we want to deliver, clear
-         * the pending flag. */
+        /*
+         * If there are no other interrupts we want to deliver, clear
+         * the pending flag.
+         */
         if (!more)
                 put_user(0, &cpu->lg->lguest_data->irq_pending);
 }
@@ -217,24 +254,29 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 /* And this is the routine when we want to set an interrupt for the Guest. */
 void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
 {
-        /* Next time the Guest runs, the core code will see if it can deliver
-         * this interrupt. */
+        /*
+         * Next time the Guest runs, the core code will see if it can deliver
+         * this interrupt.
+         */
         set_bit(irq, cpu->irqs_pending);
 
-        /* Make sure it sees it; it might be asleep (eg. halted), or
-         * running the Guest right now, in which case kick_process()
-         * will knock it out. */
+        /*
+         * Make sure it sees it; it might be asleep (eg. halted), or running
+         * the Guest right now, in which case kick_process() will knock it out.
+         */
         if (!wake_up_process(cpu->tsk))
                 kick_process(cpu->tsk);
 }
 /*:*/
 
-/* Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
  * me a patch, so we support that too.  It'd be a big step for lguest if half
  * the Plan 9 user base were to start using it.
  *
  * Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase.  Oh well. */
+ * userbase.  Oh well.
+ */
 static bool could_be_syscall(unsigned int num)
 {
         /* Normal Linux SYSCALL_VECTOR or reserved vector? */
@@ -274,9 +316,11 @@ void free_interrupts(void)
                 clear_bit(syscall_vector, used_vectors);
 }
 
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
  * page fault is easy.  The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
 static bool has_err(unsigned int trap)
 {
         return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
@@ -285,13 +329,17 @@ static bool has_err(unsigned int trap)
 /* deliver_trap() returns true if it could deliver the trap. */
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
 {
-        /* Trap numbers are always 8 bit, but we set an impossible trap number
-         * for traps inside the Switcher, so check that here. */
+        /*
+         * Trap numbers are always 8 bit, but we set an impossible trap number
+         * for traps inside the Switcher, so check that here.
+         */
         if (num >= ARRAY_SIZE(cpu->arch.idt))
                 return false;
 
-        /* Early on the Guest hasn't set the IDT entries (or maybe it put a
-         * bogus one in): if we fail here, the Guest will be killed. */
+        /*
+         * Early on the Guest hasn't set the IDT entries (or maybe it put a
+         * bogus one in): if we fail here, the Guest will be killed.
+         */
         if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
                 return false;
         set_guest_interrupt(cpu, cpu->arch.idt[num].a,
@@ -299,7 +347,8 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
         return true;
 }
 
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
  * and then calling deliver_trap() and re-entering the Guest is slow.
  * Particularly because Guest userspace system calls are traps (usually trap
  * 128).
@@ -311,69 +360,87 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
  * the other hypervisors would beat it up at lunchtime.
  *
  * This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
 static bool direct_trap(unsigned int num)
 {
-        /* Hardware interrupts don't go to the Guest at all (except system
-         * call). */
+        /*
+         * Hardware interrupts don't go to the Guest at all (except system
+         * call).
+         */
         if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
                 return false;
 
-        /* The Host needs to see page faults (for shadow paging and to save the
+        /*
+         * The Host needs to see page faults (for shadow paging and to save the
          * fault address), general protection faults (in/out emulation) and
          * device not available (TS handling), invalid opcode fault (kvm hcall),
-         * and of course, the hypercall trap. */
+         * and of course, the hypercall trap.
+         */
         return num != 14 && num != 13 && num != 7 &&
                         num != 6 && num != LGUEST_TRAP_ENTRY;
 }
 /*:*/
 
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
  * if it is careful.  The Host will let trap gates can go directly to the
  * Guest, but the Guest needs the interrupts atomically disabled for an
  * interrupt gate.  It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
 
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
  * because it's hardcoded to enter privilege level 0 and so can't go direct.
  * It's about twice as fast as the older "int 0x80" system call, so it might
  * still be worthwhile to handle it in the Switcher and lcall down to the
  * Guest.  The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
 
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
  * the kernel stack is valid (ie. mapped in the page tables).  Otherwise, the
  * CPU trying to deliver the trap will fault while trying to push the interrupt
  * words on the stack: this is called a double fault, and it forces us to kill
  * the Guest.
  *
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
 void pin_stack_pages(struct lg_cpu *cpu)
 {
         unsigned int i;
 
-        /* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
-         * two pages of stack space. */
+        /*
+         * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+         * two pages of stack space.
+         */
         for (i = 0; i < cpu->lg->stack_pages; i++)
-                /* The stack grows *upwards*, so the address we're given is the
+                /*
+                 * The stack grows *upwards*, so the address we're given is the
                  * start of the page after the kernel stack.  Subtract one to
                  * get back onto the first stack page, and keep subtracting to
-                 * get to the rest of the stack pages. */
+                 * get to the rest of the stack pages.
+                 */
                 pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
 }
 
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
  * a different kernel stack, so we can change the IDT entries to use that
  * stack.  The IDT entries expect a virtual address, so unlike most addresses
  * the Guest gives us, the "esp" (stack pointer) value here is virtual, not
  * physical.
  *
  * In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
 void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
 {
-        /* You are not allowed have a stack segment with privilege level 0: bad
-         * Guest! */
+        /*
+         * You're not allowed a stack segment with privilege level 0: bad Guest!
+         */
         if ((seg & 0x3) != GUEST_PL)
                 kill_guest(cpu, "bad stack segment %i", seg);
         /* We only expect one or two stack pages. */
@@ -387,11 +454,15 @@ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
         pin_stack_pages(cpu);
 }
 
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
 
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
 static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
                      unsigned int num, u32 lo, u32 hi)
 {
@@ -407,30 +478,38 @@ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
         if (type != 0xE && type != 0xF)
                 kill_guest(cpu, "bad IDT type %i", type);
 
-        /* We only copy the handler address, present bit, privilege level and
+        /*
+         * We only copy the handler address, present bit, privilege level and
          * type.  The privilege level controls where the trap can be triggered
          * manually with an "int" instruction.  This is usually GUEST_PL,
-         * except for system calls which userspace can use. */
+         * except for system calls which userspace can use.
+         */
         trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
         trap->b = (hi&0xFFFFEF00);
 }
 
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
  * Guest, we might as well complete the picture: how the Guest tells us where
  * it wants them to go.  This would be simple, except making traps fast
  * requires some tricks.
  *
  * We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
 {
-        /* Guest never handles: NMI, doublefault, spurious interrupt or
-         * hypercall.  We ignore when it tries to set them. */
+        /*
+         * Guest never handles: NMI, doublefault, spurious interrupt or
+         * hypercall.  We ignore when it tries to set them.
+         */
         if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
                 return;
 
-        /* Mark the IDT as changed: next time the Guest runs we'll know we have
-         * to copy this again. */
+        /*
+         * Mark the IDT as changed: next time the Guest runs we'll know we have
+         * to copy this again.
+         */
         cpu->changed |= CHANGED_IDT;
 
         /* Check that the Guest doesn't try to step outside the bounds. */
@@ -440,9 +519,11 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
                 set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
 }
 
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
  * simply return to the Host.  The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
 static void default_idt_entry(struct desc_struct *idt,
                               int trap,
                               const unsigned long handler,
@@ -451,13 +532,17 @@ static void default_idt_entry(struct desc_struct *idt,
         /* A present interrupt gate. */
         u32 flags = 0x8e00;
 
-        /* Set the privilege level on the entry for the hypercall: this allows
-         * the Guest to use the "int" instruction to trigger it. */
+        /*
+         * Set the privilege level on the entry for the hypercall: this allows
+         * the Guest to use the "int" instruction to trigger it.
+         */
         if (trap == LGUEST_TRAP_ENTRY)
                 flags |= (GUEST_PL << 13);
         else if (base)
-                /* Copy priv. level from what Guest asked for.  This allows
-                 * debug (int 3) traps from Guest userspace, for example. */
+                /*
+                 * Copy privilege level from what Guest asked for.  This allows
+                 * debug (int 3) traps from Guest userspace, for example.
+                 */
                 flags |= (base->b & 0x6000);
 
         /* Now pack it into the IDT entry in its weird format. */
@@ -475,16 +560,20 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
                 default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
 }
 
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
  * we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest.  This routine does that copy. */
+ * before we run the Guest.  This routine does that copy.
+ */
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
                 const unsigned long *def)
 {
         unsigned int i;
 
-        /* We can simply copy the direct traps, otherwise we use the default
-         * ones in the Switcher: they will return to the Host. */
+        /*
+         * We can simply copy the direct traps, otherwise we use the default
+         * ones in the Switcher: they will return to the Host.
+         */
         for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
                 const struct desc_struct *gidt = &cpu->arch.idt[i];
 
@@ -492,14 +581,16 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
                 if (!direct_trap(i))
                         continue;
 
-                /* Only trap gates (type 15) can go direct to the Guest.
+                /*
+                 * Only trap gates (type 15) can go direct to the Guest.
                  * Interrupt gates (type 14) disable interrupts as they are
                  * entered, which we never let the Guest do.  Not present
                  * entries (type 0x0) also can't go direct, of course.
                  *
                  * If it can't go direct, we still need to copy the priv. level:
                  * they might want to give userspace access to a software
-                 * interrupt. */
+                 * interrupt.
+                 */
                 if (idt_type(gidt->a, gidt->b) == 0xF)
                         idt[i] = *gidt;
                 else
@@ -518,7 +609,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
  * the next timer interrupt (in nanoseconds).  We use the high-resolution timer
  * infrastructure to set a callback at that time.
  *
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
 {
         ktime_t expires;
@@ -529,9 +621,11 @@ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
                 return;
         }
 
-        /* We use wallclock time here, so the Guest might not be running for
+        /*
+         * We use wallclock time here, so the Guest might not be running for
          * all the time between now and the timer interrupt it asked for.  This
-         * is almost always the right thing to do. */
+         * is almost always the right thing to do.
+         */
         expires = ktime_add_ns(ktime_get_real(), delta);
         hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
 }
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index 9c3138265f8e..bc28745d05af 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -16,15 +16,13 @@
 void free_pagetables(void);
 int init_pagetables(struct page **switcher_page, unsigned int pages);
 
-struct pgdir
-{
+struct pgdir {
         unsigned long gpgdir;
         pgd_t *pgdir;
 };
 
 /* We have two pages shared with guests, per cpu.  */
-struct lguest_pages
-{
+struct lguest_pages {
         /* This is the stack page mapped rw in guest */
         char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
         struct lguest_regs regs;
@@ -38,8 +36,6 @@ struct lguest_pages
 #define CHANGED_GDT_TLS         4 /* Actually a subset of CHANGED_GDT */
 #define CHANGED_ALL             3
 
-struct lguest;
-
 struct lg_cpu {
         unsigned int id;
         struct lguest *lg;
@@ -56,13 +52,13 @@ struct lg_cpu {
 
         unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
 
-        /* At end of a page shared mapped over lguest_pages in guest.  */
+        /* At end of a page shared mapped over lguest_pages in guest. */
         unsigned long regs_page;
         struct lguest_regs *regs;
 
         struct lguest_pages *last_pages;
 
-        int cpu_pgd; /* which pgd this cpu is currently using */
+        int cpu_pgd; /* Which pgd this cpu is currently using */
 
         /* If a hypercall was asked for, this points to the arguments. */
         struct hcall_args *hcall;
@@ -91,15 +87,17 @@ struct lg_eventfd_map {
 };
 
 /* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
         struct lguest_data __user *lguest_data;
         struct lg_cpu cpus[NR_CPUS];
         unsigned int nr_cpus;
 
         u32 pfn_limit;
-        /* This provides the offset to the base of guest-physical
-         * memory in the Launcher. */
+
+        /*
+         * This provides the offset to the base of guest-physical memory in the
+         * Launcher.
+         */
         void __user *mem_base;
         unsigned long kernel_address;
 
@@ -124,11 +122,13 @@ bool lguest_address_ok(const struct lguest *lg,
 void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
 void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
  * have the following helper macros which read and write a specific type (often
  * an unsigned long).
  *
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
 #define lgread(cpu, addr, type)                                         \
         ({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
 
@@ -142,9 +142,11 @@ void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
 
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
  * first step in the migration to the kernel types.  pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
 #define pgd_flags(x)    (pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)      (pgd_val(x) >> PAGE_SHIFT)
 #define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e082cdac88b4..b6200bc39b58 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,12 @@
-/*P:050 Lguest guests use a very simple method to describe devices.  It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices.  It's a
  * series of device descriptors contained just above the top of normal Guest
  * memory.
  *
  * We use the standard "virtio" device infrastructure, which provides us with a
  * console, a network and a block driver.  Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/lguest_launcher.h>
@@ -20,8 +22,10 @@
 /* The pointer to our (page) of device descriptions. */
 static void *lguest_devices;
 
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
 static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
 {
         return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
@@ -32,8 +36,10 @@ static inline void lguest_unmap(void *addr)
         iounmap((__force void __iomem *)addr);
 }
 
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
 struct lguest_device {
         struct virtio_device vdev;
 
@@ -41,9 +47,11 @@ struct lguest_device {
         struct lguest_device_desc *desc;
 };
 
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
  * the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in.  */
+ * lguest_device it's enclosed in.
+ */
 #define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
 
 /*D:130
@@ -55,7 +63,8 @@ struct lguest_device {
  * the driver will look at them during setup.
  *
  * A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
 static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
 {
         return (void *)(desc + 1);
@@ -98,10 +107,12 @@ static u32 lg_get_features(struct virtio_device *vdev)
         return features;
 }
 
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array.  Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array.  Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
 static void lg_finalize_features(struct virtio_device *vdev)
 {
         unsigned int i, bits;
@@ -112,10 +123,11 @@ static void lg_finalize_features(struct virtio_device *vdev)
         /* Give virtio_ring a chance to accept features. */
         vring_transport_features(vdev);
 
-        /* The vdev->feature array is a Linux bitmask: this isn't the
-         * same as a the simple array of bits used by lguest devices
-         * for features.  So we do this slow, manual conversion which is
-         * completely general. */
+        /*
+         * The vdev->feature array is a Linux bitmask: this isn't the same as a
+         * the simple array of bits used by lguest devices for features.  So we
+         * do this slow, manual conversion which is completely general.
+         */
         memset(out_features, 0, desc->feature_len);
         bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
         for (i = 0; i < bits; i++) {
@@ -146,15 +158,19 @@ static void lg_set(struct virtio_device *vdev, unsigned int offset,
         memcpy(lg_config(desc) + offset, buf, len);
 }
 
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
 static u8 lg_get_status(struct virtio_device *vdev)
 {
         return to_lgdev(vdev)->desc->status;
 }
 
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device.  A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device.  A zero status means "reset".
+ */
 static void set_status(struct virtio_device *vdev, u8 status)
 {
         unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
@@ -191,8 +207,7 @@ static void lg_reset(struct virtio_device *vdev)
  */
 
 /*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
         /* A copy of the information contained in the device config. */
         struct lguest_vqconfig config;
 
@@ -200,13 +215,17 @@ struct lguest_vq_info
         void *pages;
 };
 
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
  * make a hypercall.  We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
 static void lg_notify(struct virtqueue *vq)
 {
-        /* We store our virtqueue information in the "priv" pointer of the
-         * virtqueue structure. */
+        /*
+         * We store our virtqueue information in the "priv" pointer of the
+         * virtqueue structure.
+         */
         struct lguest_vq_info *lvq = vq->priv;
 
         kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
@@ -215,7 +234,8 @@ static void lg_notify(struct virtqueue *vq)
 /* An extern declaration inside a C file is bad form.  Don't do it. */
 extern void lguest_setup_irq(unsigned int irq);
 
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
  * this device and sets it up.
  *
  * This is kind of an ugly duckling.  It'd be nicer to have a standard
@@ -223,9 +243,7 @@ extern void lguest_setup_irq(unsigned int irq);
  * everyone wants to do it differently.  The KVM coders want the Guest to
  * allocate its own pages and tell the Host where they are, but for lguest it's
  * simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
                                     unsigned index,
                                     void (*callback)(struct virtqueue *vq),
@@ -244,9 +262,11 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
         if (!lvq)
                 return ERR_PTR(-ENOMEM);
 
-        /* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+        /*
+         * Make a copy of the "struct lguest_vqconfig" entry, which sits after
          * the descriptor.  We need a copy because the config space might not
-         * be aligned correctly. */
+         * be aligned correctly.
+         */
         memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
 
         printk("Mapping virtqueue %i addr %lx\n", index,
@@ -261,8 +281,10 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
                 goto free_lvq;
         }
 
-        /* OK, tell virtio_ring.c to set up a virtqueue now we know its size
-         * and we've got a pointer to its pages. */
+        /*
+         * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+         * and we've got a pointer to its pages.
+         */
         vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
                                  vdev, lvq->pages, lg_notify, callback, name);
         if (!vq) {
@@ -273,18 +295,23 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
         /* Make sure the interrupt is allocated. */
         lguest_setup_irq(lvq->config.irq);
 
-        /* Tell the interrupt for this virtqueue to go to the virtio_ring
-         * interrupt handler. */
-        /* FIXME: We used to have a flag for the Host to tell us we could use
+        /*
+         * Tell the interrupt for this virtqueue to go to the virtio_ring
+         * interrupt handler.
+         *
+         * FIXME: We used to have a flag for the Host to tell us we could use
          * the interrupt as a source of randomness: it'd be nice to have that
-         * back.. */
+         * back.
+         */
         err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
                           dev_name(&vdev->dev), vq);
         if (err)
                 goto destroy_vring;
 
-        /* Last of all we hook up our 'struct lguest_vq_info" to the
-         * virtqueue's priv pointer. */
+        /*
+         * Last of all we hook up our 'struct lguest_vq_info" to the
+         * virtqueue's priv pointer.
+         */
         vq->priv = lvq;
         return vq;
 
@@ -358,11 +385,14 @@ static struct virtio_config_ops lguest_config_ops = {
         .del_vqs = lg_del_vqs,
 };
 
-/* The root device for the lguest virtio devices.  This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices.  This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
 static struct device *lguest_root;
 
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
  * It's a separate function because it's neater that way, and because an
  * earlier version of the code supported hotplug and unplug.  They were removed
  * early on because they were never used.
@@ -371,14 +401,14 @@ static struct device *lguest_root;
  *
  * It's worth reading this carefully: we start with a pointer to the new device
  * descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
 static void add_lguest_device(struct lguest_device_desc *d,
                               unsigned int offset)
 {
         struct lguest_device *ldev;
 
-        /* Start with zeroed memory; Linux's device layer seems to count on
-         * it. */
+        /* Start with zeroed memory; Linux's device layer counts on it. */
         ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
         if (!ldev) {
                 printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
@@ -388,17 +418,25 @@ static void add_lguest_device(struct lguest_device_desc *d,
 
         /* This devices' parent is the lguest/ dir. */
         ldev->vdev.dev.parent = lguest_root;
-        /* We have a unique device index thanks to the dev_index counter. */
+        /*
+         * The device type comes straight from the descriptor.  There's also a
+         * device vendor field in the virtio_device struct, which we leave as
+         * 0.
+         */
         ldev->vdev.id.device = d->type;
-        /* We have a simple set of routines for querying the device's
-         * configuration information and setting its status. */
+        /*
+         * We have a simple set of routines for querying the device's
+         * configuration information and setting its status.
+         */
         ldev->vdev.config = &lguest_config_ops;
         /* And we remember the device's descriptor for lguest_config_ops. */
         ldev->desc = d;
 
-        /* register_virtio_device() sets up the generic fields for the struct
+        /*
+         * register_virtio_device() sets up the generic fields for the struct
          * virtio_device and calls device_register().  This makes the bus
-         * infrastructure look for a matching driver. */
+         * infrastructure look for a matching driver.
+         */
         if (register_virtio_device(&ldev->vdev) != 0) {
                 printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
                        offset, d->type);
@@ -406,8 +444,10 @@ static void add_lguest_device(struct lguest_device_desc *d,
         }
 }
 
-/*D:110 scan_devices() simply iterates through the device page.  The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page.  The type 0 is
+ * reserved to mean "end of devices".
+ */
 static void scan_devices(void)
 {
         unsigned int i;
@@ -426,7 +466,8 @@ static void scan_devices(void)
         }
 }
 
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
  * lguest device infrastructure.  We check that we are a Guest by checking
  * pv_info.name: there are other ways of checking, but this seems most
  * obvious to me.
@@ -437,7 +478,8 @@ static void scan_devices(void)
  * correct sysfs incantation).
  *
  * Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
 static int __init lguest_devices_init(void)
 {
         if (strcmp(pv_info.name, "lguest") != 0)
@@ -456,11 +498,13 @@ static int __init lguest_devices_init(void)
 /* We do this after core stuff, but before the drivers. */
 postcore_initcall(lguest_devices_init);
 
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
  * devices themselves: net, block and console.  Since they're all now virtio
  * devices rather than lguest-specific, I've decided to ignore them.  Mostly,
  * they're kind of boring.  But this does mean you'll never experience the
  * thrill of reading the forbidden love scene buried deep in the block driver.
  *
  * "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 9f9a2953b383..b4d3f7ca554f 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -1,8 +1,9 @@
 /*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
  * controls and communicates with the Guest.  For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset.  A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point.  A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
@@ -11,14 +12,41 @@
 #include <linux/file.h>
 #include "lg.h"
 
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds.  That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
 bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
         unsigned int i;
         struct lg_eventfd_map *map;
 
-        /* lg->eventfds is RCU-protected */
+        /*
+         * This "rcu_read_lock()" helps track when someone is still looking at
+         * the (RCU-using) eventfds array.  It's not actually a lock at all;
+         * indeed it's a noop in many configurations.  (You didn't expect me to
+         * explain all the RCU secrets here, did you?)
+         */
         rcu_read_lock();
+        /*
+         * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+         * makes sure we don't access the memory pointed to by
+         * cpu->lg->eventfds before cpu->lg->eventfds is set.  Sounds crazy,
+         * but Alpha allows this!  Paul McKenney points out that a really
+         * aggressive compiler could have the same effect:
+         *   http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+         *
+         * So play safe, use rcu_dereference to get the rcu-protected pointer:
+         */
         map = rcu_dereference(cpu->lg->eventfds);
+        /*
+         * Simple array search: even if they add an eventfd while we do this,
+         * we'll continue to use the old array and just won't see the new one.
+         */
         for (i = 0; i < map->num; i++) {
                 if (map->map[i].addr == cpu->pending_notify) {
                         eventfd_signal(map->map[i].event, 1);
@@ -26,19 +54,50 @@ bool send_notify_to_eventfd(struct lg_cpu *cpu)
                         break;
                 }
         }
+        /* We're done with the rcu-protected variable cpu->lg->eventfds. */
         rcu_read_unlock();
+
+        /* If we cleared the notification, it's because we found a match. */
         return cpu->pending_notify == 0;
 }
 
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update.  Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here.  (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens.  But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element.  Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it.  That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
 static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 {
         struct lg_eventfd_map *new, *old = lg->eventfds;
 
+        /*
+         * We don't allow notifications on value 0 anyway (pending_notify of
+         * 0 means "nothing pending").
+         */
         if (!addr)
                 return -EINVAL;
 
-        /* Replace the old array with the new one, carefully: others can
-         * be accessing it at the same time */
+        /*
+         * Replace the old array with the new one, carefully: others can
+         * be accessing it at the same time.
+         */
         new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
                       GFP_KERNEL);
         if (!new)
@@ -52,22 +111,41 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
         new->map[new->num].addr = addr;
         new->map[new->num].event = eventfd_ctx_fdget(fd);
         if (IS_ERR(new->map[new->num].event)) {
+                int err =  PTR_ERR(new->map[new->num].event);
                 kfree(new);
-                return PTR_ERR(new->map[new->num].event);
+                return err;
         }
         new->num++;
 
-        /* Now put new one in place. */
+        /*
+         * Now put new one in place: rcu_assign_pointer() is a fancy way of
+         * doing "lg->eventfds = new", but it uses memory barriers to make
+         * absolutely sure that the contents of "new" written above is nailed
+         * down before we actually do the assignment.
+         *
+         * We have to think about these kinds of things when we're operating on
+         * live data without locks.
+         */
         rcu_assign_pointer(lg->eventfds, new);
 
-        /* We're not in a big hurry.  Wait until noone's looking at old
-         * version, then delete it. */
+        /*
+         * We're not in a big hurry.  Wait until noone's looking at old
+         * version, then free it.
+         */
         synchronize_rcu();
         kfree(old);
 
         return 0;
 }
 
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor.  The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
 static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
 {
         unsigned long addr, fd;
@@ -79,15 +157,22 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
         if (get_user(fd, input) != 0)
                 return -EFAULT;
 
+        /*
+         * Just make sure two callers don't add eventfds at once.  We really
+         * only need to lock against callers adding to the same Guest, so using
+         * the Big Lguest Lock is overkill.  But this is setup, not a fast path.
+         */
         mutex_lock(&lguest_lock);
         err = add_eventfd(lg, addr, fd);
         mutex_unlock(&lguest_lock);
 
-        return 0;
+        return err;
 }
 
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
 static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 {
         unsigned long irq;
@@ -97,12 +182,18 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
         if (irq >= LGUEST_IRQS)
                 return -EINVAL;
 
+        /*
+         * Next time the Guest runs, the core code will see if it can deliver
+         * this interrupt.
+         */
         set_interrupt(cpu, irq);
         return 0;
 }
 
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
 static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 {
         struct lguest *lg = file->private_data;
@@ -138,8 +229,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
                 return len;
         }
 
-        /* If we returned from read() last time because the Guest sent I/O,
-         * clear the flag. */
+        /*
+         * If we returned from read() last time because the Guest sent I/O,
+         * clear the flag.
+         */
         if (cpu->pending_notify)
                 cpu->pending_notify = 0;
 
@@ -147,8 +240,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
         return run_guest(cpu, (unsigned long __user *)user);
 }
 
-/*L:025 This actually initializes a CPU.  For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU.  For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
 static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 {
         /* We have a limited number the number of CPUs in the lguest struct. */
@@ -163,8 +258,10 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
         /* Each CPU has a timer it can set. */
         init_clockdev(cpu);
 
-        /* We need a complete page for the Guest registers: they are accessible
-         * to the Guest and we can only grant it access to whole pages. */
+        /*
+         * We need a complete page for the Guest registers: they are accessible
+         * to the Guest and we can only grant it access to whole pages.
+         */
         cpu->regs_page = get_zeroed_page(GFP_KERNEL);
         if (!cpu->regs_page)
                 return -ENOMEM;
@@ -172,29 +269,38 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
         /* We actually put the registers at the bottom of the page. */
         cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
 
-        /* Now we initialize the Guest's registers, handing it the start
-         * address. */
+        /*
+         * Now we initialize the Guest's registers, handing it the start
+         * address.
+         */
         lguest_arch_setup_regs(cpu, start_ip);
 
-        /* We keep a pointer to the Launcher task (ie. current task) for when
-         * other Guests want to wake this one (eg. console input). */
+        /*
+         * We keep a pointer to the Launcher task (ie. current task) for when
+         * other Guests want to wake this one (eg. console input).
+         */
         cpu->tsk = current;
 
-        /* We need to keep a pointer to the Launcher's memory map, because if
+        /*
+         * We need to keep a pointer to the Launcher's memory map, because if
          * the Launcher dies we need to clean it up.  If we don't keep a
-         * reference, it is destroyed before close() is called. */
+         * reference, it is destroyed before close() is called.
+         */
         cpu->mm = get_task_mm(cpu->tsk);
 
-        /* We remember which CPU's pages this Guest used last, for optimization
-         * when the same Guest runs on the same CPU twice. */
+        /*
+         * We remember which CPU's pages this Guest used last, for optimization
+         * when the same Guest runs on the same CPU twice.
+         */
         cpu->last_pages = NULL;
 
         /* No error == success. */
         return 0;
 }
 
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value).  These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value).  These are:
  *
  * base: The start of the Guest-physical memory inside the Launcher memory.
  *
@@ -206,14 +312,15 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
  */
 static int initialize(struct file *file, const unsigned long __user *input)
 {
-        /* "struct lguest" contains everything we (the Host) know about a
-         * Guest. */
+        /* "struct lguest" contains all we (the Host) know about a Guest. */
         struct lguest *lg;
         int err;
         unsigned long args[3];
 
-        /* We grab the Big Lguest lock, which protects against multiple
-         * simultaneous initializations. */
+        /*
+         * We grab the Big Lguest lock, which protects against multiple
+         * simultaneous initializations.
+         */
         mutex_lock(&lguest_lock);
         /* You can't initialize twice!  Close the device and start again... */
         if (file->private_data) {
@@ -248,8 +355,10 @@ static int initialize(struct file *file, const unsigned long __user *input)
         if (err)
                 goto free_eventfds;
 
-        /* Initialize the Guest's shadow page tables, using the toplevel
-         * address the Launcher gave us.  This allocates memory, so can fail. */
+        /*
+         * Initialize the Guest's shadow page tables, using the toplevel
+         * address the Launcher gave us.  This allocates memory, so can fail.
+         */
         err = init_guest_pagetable(lg);
         if (err)
                 goto free_regs;
@@ -274,20 +383,24 @@ unlock:
         return err;
 }
 
-/*L:010 The first operation the Launcher does must be a write.  All writes
+/*L:010
+ * The first operation the Launcher does must be a write.  All writes
  * start with an unsigned long number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
  *
  * Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with.  Currently this is always 0, since we only
+ * CPU number we're dealing with.  Currently this is always 0 since we only
  * support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
 static ssize_t write(struct file *file, const char __user *in,
                      size_t size, loff_t *off)
 {
-        /* Once the Guest is initialized, we hold the "struct lguest" in the
-         * file private data. */
+        /*
+         * Once the Guest is initialized, we hold the "struct lguest" in the
+         * file private data.
+         */
         struct lguest *lg = file->private_data;
         const unsigned long __user *input = (const unsigned long __user *)in;
         unsigned long req;
@@ -322,13 +435,15 @@ static ssize_t write(struct file *file, const char __user *in,
         }
 }
 
-/*L:060 The final piece of interface code is the close() routine.  It reverses
+/*L:060
+ * The final piece of interface code is the close() routine.  It reverses
  * everything done in initialize().  This is usually called because the
  * Launcher exited.
  *
  * Note that the close routine returns 0 or a negative error number: it can't
  * really fail, but it can whine.  I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
 static int close(struct inode *inode, struct file *file)
 {
         struct lguest *lg = file->private_data;
@@ -338,8 +453,10 @@ static int close(struct inode *inode, struct file *file)
         if (!lg)
                 return 0;
 
-        /* We need the big lock, to protect from inter-guest I/O and other
-         * Launchers initializing guests. */
+        /*
+         * We need the big lock, to protect from inter-guest I/O and other
+         * Launchers initializing guests.
+         */
         mutex_lock(&lguest_lock);
 
         /* Free up the shadow page tables for the Guest. */
@@ -350,8 +467,10 @@ static int close(struct inode *inode, struct file *file)
                 hrtimer_cancel(&lg->cpus[i].hrt);
                 /* We can free up the register page we allocated. */
                 free_page(lg->cpus[i].regs_page);
-                /* Now all the memory cleanups are done, it's safe to release
-                 * the Launcher's memory management structure. */
+                /*
+                 * Now all the memory cleanups are done, it's safe to release
+                 * the Launcher's memory management structure.
+                 */
                 mmput(lg->cpus[i].mm);
         }
 
@@ -360,8 +479,10 @@ static int close(struct inode *inode, struct file *file)
                 eventfd_ctx_put(lg->eventfds->map[i].event);
         kfree(lg->eventfds);
 
-        /* If lg->dead doesn't contain an error code it will be NULL or a
-         * kmalloc()ed string, either of which is ok to hand to kfree(). */
+        /*
+         * If lg->dead doesn't contain an error code it will be NULL or a
+         * kmalloc()ed string, either of which is ok to hand to kfree().
+         */
         if (!IS_ERR(lg->dead))
                 kfree(lg->dead);
         /* Free the memory allocated to the lguest_struct */
@@ -385,7 +506,8 @@ static int close(struct inode *inode, struct file *file)
  *
  * We begin our understanding with the Host kernel interface which the Launcher
  * uses: reading and writing a character device called /dev/lguest.  All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
 static struct file_operations lguest_fops = {
         .owner   = THIS_MODULE,
         .release = close,
@@ -393,8 +515,10 @@ static struct file_operations lguest_fops = {
         .read    = read,
 };
 
-/* This is a textbook example of a "misc" character device.  Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device.  Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
 static struct miscdevice lguest_dev = {
         .minor  = MISC_DYNAMIC_MINOR,
         .name   = "lguest",
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a6fe1abda240..a8d0aee3bc0e 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -1,9 +1,11 @@
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
  * previous encounters.  It's functional, and as neat as it can be in the
  * circumstances, but be wary, for these things are subtle and break easily.
  * The Guest provides a virtual to physical mapping, but we can neither trust
  * it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
 
 /* Copyright (C) Rusty Russell IBM Corporation 2006.
  * GPL v2 and any later version */
@@ -17,18 +19,20 @@
 #include <asm/bootparam.h>
 #include "lg.h"
 
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
  * It'd be nice to have a callback in the "struct mm_struct" when Linux wants
  * to swap out.  If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
 
 /*H:300
  * The Page Table Code
  *
- * We use two-level page tables for the Guest.  If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE.  If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
  *
  * The Guest keeps page tables, but we maintain the actual ones here: these are
  * called "shadow" page tables.  Which is a very Guest-centric name: these are
@@ -45,16 +49,18 @@
  *  (v) Flushing (throwing away) page tables,
  *  (vi) Mapping the Switcher when the Guest is about to run,
  *  (vii) Setting up the page tables initially.
- :*/
+:*/
 
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB.  The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page.  */
+/*
+ * The Switcher uses the complete top PTE page.  That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page.  */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_PMD_INDEX      (PTRS_PER_PMD - 1)
 #define RESERVE_MEM             2U
@@ -64,14 +70,18 @@
 #define CHECK_GPGD_MASK         _PAGE_TABLE
 #endif
 
-/* We actually need a separate PTE page for each CPU.  Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
 static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
 #define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
 
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean.  The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
  *
  * There are two functions which return pointers to the shadow (aka "real")
  * page tables.
@@ -79,7 +89,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
  * spgd_addr() takes the virtual address and returns a pointer to the top-level
  * page directory entry (PGD) for that address.  Since we keep track of several
  * page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
 static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 {
         unsigned int index = pgd_index(vaddr);
@@ -96,9 +107,11 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
  * address of the PMD page.  It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
 static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
         unsigned int index = pmd_index(vaddr);
@@ -119,9 +132,11 @@ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 }
 #endif
 
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
 static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
 #ifdef CONFIG_X86_PAE
@@ -139,8 +154,10 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
         return &page[pte_index(vaddr)];
 }
 
-/* These two functions just like the above two, except they access the Guest
- * page tables.  Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables.  Hence they return a Guest address.
+ */
 static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 {
         unsigned int index = vaddr >> (PGDIR_SHIFT);
@@ -148,6 +165,7 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
 static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 {
         unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
@@ -155,6 +173,7 @@ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
         return gpage + pmd_index(vaddr) * sizeof(pmd_t);
 }
 
+/* Follow the PMD to the PTE. */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
                                pmd_t gpmd, unsigned long vaddr)
 {
@@ -164,6 +183,7 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
         return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
 #else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
                                 pgd_t gpgd, unsigned long vaddr)
 {
@@ -175,17 +195,21 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
 #endif
 /*:*/
 
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
 
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
  * virtual address might not be mapped by the Launcher, the write flag is set
  * and the page is read-only, or the write flag was set and the page was
  * shared so had to be copied, but we ran out of memory.
  *
  * This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
         struct page *page;
@@ -198,33 +222,41 @@ static unsigned long get_pfn(unsigned long virtpfn, int write)
         return -1UL;
 }
 
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
  * entry can be a little tricky.  The flags are (almost) the same, but the
  * Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
 static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 {
         unsigned long pfn, base, flags;
 
-        /* The Guest sets the global flag, because it thinks that it is using
+        /*
+         * The Guest sets the global flag, because it thinks that it is using
          * PGE.  We only told it to use PGE so it would tell us whether it was
          * flushing a kernel mapping or a userspace mapping.  We don't actually
-         * use the global bit, so throw it away. */
+         * use the global bit, so throw it away.
+         */
         flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
 
         /* The Guest's pages are offset inside the Launcher. */
         base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
 
-        /* We need a temporary "unsigned long" variable to hold the answer from
+        /*
+         * We need a temporary "unsigned long" variable to hold the answer from
          * get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
          * fit in spte.pfn.  get_pfn() finds the real physical number of the
-         * page, given the virtual number. */
+         * page, given the virtual number.
+         */
         pfn = get_pfn(base + pte_pfn(gpte), write);
         if (pfn == -1UL) {
                 kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
-                /* When we destroy the Guest, we'll go through the shadow page
+                /*
+                 * When we destroy the Guest, we'll go through the shadow page
                  * tables and release_pte() them.  Make sure we don't think
-                 * this one is valid! */
+                 * this one is valid!
+                 */
                 flags = 0;
         }
         /* Now we assemble our shadow PTE from the page number and flags. */
@@ -234,8 +266,10 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-        /* Remember that get_user_pages_fast() took a reference to the page, in
-         * get_pfn()?  We have to put it back now. */
+        /*
+         * Remember that get_user_pages_fast() took a reference to the page, in
+         * get_pfn()?  We have to put it back now.
+         */
         if (pte_flags(pte) & _PAGE_PRESENT)
                 put_page(pte_page(pte));
 }
@@ -273,7 +307,8 @@ static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
  * and return to the Guest without it knowing.
  *
  * If we fixed up the fault (ie. we mapped the address), this routine returns
- * true.  Otherwise, it was a real fault and we need to tell the Guest. */
+ * true.  Otherwise, it was a real fault and we need to tell the Guest.
+ */
 bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 {
         pgd_t gpgd;
@@ -282,6 +317,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
         pte_t gpte;
         pte_t *spte;
 
+        /* Mid level for PAE. */
 #ifdef CONFIG_X86_PAE
         pmd_t *spmd;
         pmd_t gpmd;
@@ -298,22 +334,26 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
         if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
                 /* No shadow entry: allocate a new shadow PTE page. */
                 unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
-                /* This is not really the Guest's fault, but killing it is
-                 * simple for this corner case. */
+                /*
+                 * This is not really the Guest's fault, but killing it is
+                 * simple for this corner case.
+                 */
                 if (!ptepage) {
                         kill_guest(cpu, "out of memory allocating pte page");
                         return false;
                 }
                 /* We check that the Guest pgd is OK. */
                 check_gpgd(cpu, gpgd);
-                /* And we copy the flags to the shadow PGD entry.  The page
-                 * number in the shadow PGD is the page we just allocated. */
+                /*
+                 * And we copy the flags to the shadow PGD entry.  The page
+                 * number in the shadow PGD is the page we just allocated.
+                 */
                 set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
         }
 
 #ifdef CONFIG_X86_PAE
         gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
-        /* middle level not present?  We can't map it in. */
+        /* Middle level not present?  We can't map it in. */
         if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
                 return false;
 
@@ -324,8 +364,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
                 /* No shadow entry: allocate a new shadow PTE page. */
                 unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
 
-                /* This is not really the Guest's fault, but killing it is
-                * simple for this corner case. */
+                /*
+                 * This is not really the Guest's fault, but killing it is
+                 * simple for this corner case.
+                 */
                 if (!ptepage) {
                         kill_guest(cpu, "out of memory allocating pte page");
                         return false;
@@ -334,27 +376,37 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
                 /* We check that the Guest pmd is OK. */
                 check_gpmd(cpu, gpmd);
 
-                /* And we copy the flags to the shadow PMD entry.  The page
-                 * number in the shadow PMD is the page we just allocated. */
+                /*
+                 * And we copy the flags to the shadow PMD entry.  The page
+                 * number in the shadow PMD is the page we just allocated.
+                 */
                 native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
         }
 
-        /* OK, now we look at the lower level in the Guest page table: keep its
-         * address, because we might update it later. */
+        /*
+         * OK, now we look at the lower level in the Guest page table: keep its
+         * address, because we might update it later.
+         */
         gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
 #else
-        /* OK, now we look at the lower level in the Guest page table: keep its
-         * address, because we might update it later. */
+        /*
+         * OK, now we look at the lower level in the Guest page table: keep its
+         * address, because we might update it later.
+         */
         gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
 #endif
+
+        /* Read the actual PTE value. */
         gpte = lgread(cpu, gpte_ptr, pte_t);
 
         /* If this page isn't in the Guest page tables, we can't page it in. */
         if (!(pte_flags(gpte) & _PAGE_PRESENT))
                 return false;
 
-        /* Check they're not trying to write to a page the Guest wants
-         * read-only (bit 2 of errcode == write). */
+        /*
+         * Check they're not trying to write to a page the Guest wants
+         * read-only (bit 2 of errcode == write).
+         */
         if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
                 return false;
 
@@ -362,8 +414,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
         if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
                 return false;
 
-        /* Check that the Guest PTE flags are OK, and the page number is below
-         * the pfn_limit (ie. not mapping the Launcher binary). */
+        /*
+         * Check that the Guest PTE flags are OK, and the page number is below
+         * the pfn_limit (ie. not mapping the Launcher binary).
+         */
         check_gpte(cpu, gpte);
 
         /* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
@@ -373,29 +427,40 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 
         /* Get the pointer to the shadow PTE entry we're going to set. */
         spte = spte_addr(cpu, *spgd, vaddr);
-        /* If there was a valid shadow PTE entry here before, we release it.
-         * This can happen with a write to a previously read-only entry. */
+
+        /*
+         * If there was a valid shadow PTE entry here before, we release it.
+         * This can happen with a write to a previously read-only entry.
+         */
         release_pte(*spte);
 
-        /* If this is a write, we insist that the Guest page is writable (the
-         * final arg to gpte_to_spte()). */
+        /*
+         * If this is a write, we insist that the Guest page is writable (the
+         * final arg to gpte_to_spte()).
+         */
         if (pte_dirty(gpte))
                 *spte = gpte_to_spte(cpu, gpte, 1);
         else
-                /* If this is a read, don't set the "writable" bit in the page
+                /*
+                 * If this is a read, don't set the "writable" bit in the page
                  * table entry, even if the Guest says it's writable.  That way
                  * we will come back here when a write does actually occur, so
-                 * we can update the Guest's _PAGE_DIRTY flag. */
+                 * we can update the Guest's _PAGE_DIRTY flag.
+                 */
                 native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
-        /* Finally, we write the Guest PTE entry back: we've set the
-         * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+        /*
+         * Finally, we write the Guest PTE entry back: we've set the
+         * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+         */
         lgwrite(cpu, gpte_ptr, pte_t, gpte);
 
-        /* The fault is fixed, the page table is populated, the mapping
+        /*
+         * The fault is fixed, the page table is populated, the mapping
          * manipulated, the result returned and the code complete.  A small
          * delay and a trace of alliteration are the only indications the Guest
-         * has that a page fault occurred at all. */
+         * has that a page fault occurred at all.
+         */
         return true;
 }
 
@@ -408,7 +473,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
  * mapped, so it's overkill.
  *
  * This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
 static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 {
         pgd_t *spgd;
@@ -428,21 +494,26 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
                 return false;
 #endif
 
-        /* Check the flags on the pte entry itself: it must be present and
-         * writable. */
+        /*
+         * Check the flags on the pte entry itself: it must be present and
+         * writable.
+         */
         flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
         return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
 
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
  * in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
 void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 {
         if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
                 kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
+/*:*/
 
 #ifdef CONFIG_X86_PAE
 static void release_pmd(pmd_t *spmd)
@@ -479,15 +550,21 @@ static void release_pgd(pgd_t *spgd)
 }
 
 #else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this.  The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
 static void release_pgd(pgd_t *spgd)
 {
         /* If the entry's not present, there's nothing to release. */
         if (pgd_flags(*spgd) & _PAGE_PRESENT) {
                 unsigned int i;
-                /* Converting the pfn to find the actual PTE page is easy: turn
+                /*
+                 * Converting the pfn to find the actual PTE page is easy: turn
                  * the page number into a physical address, then convert to a
-                 * virtual address (easy for kernel pages like this one). */
+                 * virtual address (easy for kernel pages like this one).
+                 */
                 pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
                 /* For each entry in the page, we might need to release it. */
                 for (i = 0; i < PTRS_PER_PTE; i++)
@@ -499,9 +576,12 @@ static void release_pgd(pgd_t *spgd)
         }
 }
 #endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
 static void flush_user_mappings(struct lguest *lg, int idx)
 {
         unsigned int i;
@@ -510,10 +590,12 @@ static void flush_user_mappings(struct lguest *lg, int idx)
                 release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
  *
  * The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
 void guest_pagetable_flush_user(struct lg_cpu *cpu)
 {
         /* Drop the userspace part of the current page table. */
@@ -551,9 +633,11 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
         return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
 }
 
-/* We keep several page tables.  This is a simple routine to find the page
+/*
+ * We keep several page tables.  This is a simple routine to find the page
  * table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
 static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
 {
         unsigned int i;
@@ -563,9 +647,11 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
         return i;
 }
 
-/*H:435 And this is us, creating the new page directory.  If we really do
+/*H:435
+ * And this is us, creating the new page directory.  If we really do
  * allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
 static unsigned int new_pgdir(struct lg_cpu *cpu,
                               unsigned long gpgdir,
                               int *blank_pgdir)
@@ -575,8 +661,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
         pmd_t *pmd_table;
 #endif
 
-        /* We pick one entry at random to throw out.  Choosing the Least
-         * Recently Used might be better, but this is easy. */
+        /*
+         * We pick one entry at random to throw out.  Choosing the Least
+         * Recently Used might be better, but this is easy.
+         */
         next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
         /* If it's never been allocated at all before, try now. */
         if (!cpu->lg->pgdirs[next].pgdir) {
@@ -587,8 +675,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
                         next = cpu->cpu_pgd;
                 else {
 #ifdef CONFIG_X86_PAE
-                        /* In PAE mode, allocate a pmd page and populate the
-                         * last pgd entry. */
+                        /*
+                         * In PAE mode, allocate a pmd page and populate the
+                         * last pgd entry.
+                         */
                         pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
                         if (!pmd_table) {
                                 free_page((long)cpu->lg->pgdirs[next].pgdir);
@@ -598,8 +688,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
                                 set_pgd(cpu->lg->pgdirs[next].pgdir +
                                         SWITCHER_PGD_INDEX,
                                         __pgd(__pa(pmd_table) | _PAGE_PRESENT));
-                                /* This is a blank page, so there are no kernel
-                                 * mappings: caller must map the stack! */
+                                /*
+                                 * This is a blank page, so there are no kernel
+                                 * mappings: caller must map the stack!
+                                 */
                                 *blank_pgdir = 1;
                         }
 #else
@@ -615,19 +707,23 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
         return next;
 }
 
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
  *
  * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir).  This occurs on almost every context switch. */
+ * pgdir).  This occurs on almost every context switch.
+ */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
 {
         int newpgdir, repin = 0;
 
         /* Look to see if we have this one already. */
         newpgdir = find_pgdir(cpu->lg, pgtable);
-        /* If not, we allocate or mug an existing one: if it's a fresh one,
-         * repin gets set to 1. */
+        /*
+         * If not, we allocate or mug an existing one: if it's a fresh one,
+         * repin gets set to 1.
+         */
         if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
                 newpgdir = new_pgdir(cpu, pgtable, &repin);
         /* Change the current pgd index to the new one. */
@@ -637,9 +733,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
                 pin_stack_pages(cpu);
 }
 
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
  * the shadow page tables, including the Guest's kernel mappings.  This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
 static void release_all_pagetables(struct lguest *lg)
 {
         unsigned int i, j;
@@ -656,8 +754,10 @@ static void release_all_pagetables(struct lguest *lg)
                         spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
                         pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
 
-                        /* And release the pmd entries of that pmd page,
-                         * except for the switcher pmd. */
+                        /*
+                         * And release the pmd entries of that pmd page,
+                         * except for the switcher pmd.
+                         */
                         for (k = 0; k < SWITCHER_PMD_INDEX; k++)
                                 release_pmd(&pmdpage[k]);
 #endif
@@ -667,10 +767,12 @@ static void release_all_pagetables(struct lguest *lg)
                 }
 }
 
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
  * mapping.  Since kernel mappings are in every page table, it's easiest to
  * throw them all away.  This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
 void guest_pagetable_clear_all(struct lg_cpu *cpu)
 {
         release_all_pagetables(cpu->lg);
@@ -678,15 +780,19 @@ void guest_pagetable_clear_all(struct lg_cpu *cpu)
         pin_stack_pages(cpu);
 }
 /*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
  * performance sucks for guests using highmem.  In fact, a guest with
  * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
  * usually slower than a Guest with less memory.
  *
  * This, of course, cannot be fixed.  It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
 
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
  * "idx"'th shadow page table.
  *
  * Normally, we can just throw out the old entry and replace it with 0: if they
@@ -715,31 +821,36 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
                 spmd = spmd_addr(cpu, *spgd, vaddr);
                 if (pmd_flags(*spmd) & _PAGE_PRESENT) {
 #endif
-                        /* Otherwise, we start by releasing
-                         * the existing entry. */
+                        /* Otherwise, start by releasing the existing entry. */
                         pte_t *spte = spte_addr(cpu, *spgd, vaddr);
                         release_pte(*spte);
 
-                        /* If they're setting this entry as dirty or accessed,
-                         * we might as well put that entry they've given us
-                         * in now.  This shaves 10% off a
-                         * copy-on-write micro-benchmark. */
+                        /*
+                         * If they're setting this entry as dirty or accessed,
+                         * we might as well put that entry they've given us in
+                         * now.  This shaves 10% off a copy-on-write
+                         * micro-benchmark.
+                         */
                         if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
                                 check_gpte(cpu, gpte);
                                 native_set_pte(spte,
                                                 gpte_to_spte(cpu, gpte,
                                                 pte_flags(gpte) & _PAGE_DIRTY));
-                        } else
-                                /* Otherwise kill it and we can demand_page()
-                                 * it in later. */
+                        } else {
+                                /*
+                                 * Otherwise kill it and we can demand_page()
+                                 * it in later.
+                                 */
                                 native_set_pte(spte, __pte(0));
+                        }
 #ifdef CONFIG_X86_PAE
                 }
 #endif
         }
 }
 
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
  *
  * We keep track of several different page tables (the Guest uses one for each
  * process, so it makes sense to cache at least a few).  Each of these have
@@ -748,12 +859,15 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
  * all the page tables, not just the current one.  This is rare.
  *
  * The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings.  This speeds up context switch immensely. */
+ * the kernel mappings.  This speeds up context switch immensely.
+ */
 void guest_set_pte(struct lg_cpu *cpu,
                    unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
 {
-        /* Kernel mappings must be changed on all top levels.  Slow, but doesn't
-         * happen often. */
+        /*
+         * Kernel mappings must be changed on all top levels.  Slow, but doesn't
+         * happen often.
+         */
         if (vaddr >= cpu->lg->kernel_address) {
                 unsigned int i;
                 for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -795,19 +909,25 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
                 /* ... throw it away. */
                 release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+
 #ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away.  It's easy. */
 void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
 {
         guest_pagetable_clear_all(&lg->cpus[0]);
 }
 #endif
 
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own.  The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
  *
  * We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
 static unsigned long setup_pagetables(struct lguest *lg,
                                       unsigned long mem,
                                       unsigned long initrd_size)
@@ -825,8 +945,10 @@ static unsigned long setup_pagetables(struct lguest *lg,
         unsigned int phys_linear;
 #endif
 
-        /* We have mapped_pages frames to map, so we need
-         * linear_pages page tables to map them. */
+        /*
+         * We have mapped_pages frames to map, so we need linear_pages page
+         * tables to map them.
+         */
         mapped_pages = mem / PAGE_SIZE;
         linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
 
@@ -837,10 +959,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
         linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
 #ifdef CONFIG_X86_PAE
+        /*
+         * And the single mid page goes below that.  We only use one, but
+         * that's enough to map 1G, which definitely gets us through boot.
+         */
         pmds = (void *)linear - PAGE_SIZE;
 #endif
-        /* Linear mapping is easy: put every page's address into the
-         * mapping in order. */
+        /*
+         * Linear mapping is easy: put every page's address into the
+         * mapping in order.
+         */
         for (i = 0; i < mapped_pages; i++) {
                 pte_t pte;
                 pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
@@ -848,11 +976,14 @@ static unsigned long setup_pagetables(struct lguest *lg,
                         return -EFAULT;
         }
 
-        /* The top level points to the linear page table pages above.
-         * We setup the identity and linear mappings here. */
 #ifdef CONFIG_X86_PAE
+        /*
+         * Make the Guest PMD entries point to the corresponding place in the
+         * linear mapping (up to one page worth of PMD).
+         */
         for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
              i += PTRS_PER_PTE, j++) {
+                /* FIXME: native_set_pmd is overkill here. */
                 native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
                 - mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
@@ -860,18 +991,36 @@ static unsigned long setup_pagetables(struct lguest *lg,
                         return -EFAULT;
         }
 
+        /* One PGD entry, pointing to that PMD page. */
         set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+        /* Copy it in as the first PGD entry (ie. addresses 0-1G). */
         if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
                 return -EFAULT;
+        /*
+         * And the third PGD entry (ie. addresses 3G-4G).
+         *
+         * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+         */
         if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
                 return -EFAULT;
 #else
+        /*
+         * The top level points to the linear page table pages above.
+         * We setup the identity and linear mappings here.
+         */
         phys_linear = (unsigned long)linear - mem_base;
         for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
                 pgd_t pgd;
+                /*
+                 * Create a PGD entry which points to the right part of the
+                 * linear PTE pages.
+                 */
                 pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
                             (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
+                /*
+                 * Copy it into the PGD page at 0 and PAGE_OFFSET.
+                 */
                 if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
                     || copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
                                            + i / PTRS_PER_PTE],
@@ -880,15 +1029,19 @@ static unsigned long setup_pagetables(struct lguest *lg,
         }
 #endif
 
-        /* We return the top level (guest-physical) address: remember where
-         * this is. */
+        /*
+         * We return the top level (guest-physical) address: we remember where
+         * this is to write it into lguest_data when the Guest initializes.
+         */
         return (unsigned long)pgdir - mem_base;
 }
 
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
  *
  * When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is.  We set some things up here: */
+ * its first page table is.  We set some things up here:
+ */
 int init_guest_pagetable(struct lguest *lg)
 {
         u64 mem;
@@ -898,21 +1051,27 @@ int init_guest_pagetable(struct lguest *lg)
         pgd_t *pgd;
         pmd_t *pmd_table;
 #endif
-        /* Get the Guest memory size and the ramdisk size from the boot header
-         * located at lg->mem_base (Guest address 0). */
+        /*
+         * Get the Guest memory size and the ramdisk size from the boot header
+         * located at lg->mem_base (Guest address 0).
+         */
         if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
             || get_user(initrd_size, &boot->hdr.ramdisk_size))
                 return -EFAULT;
 
-        /* We start on the first shadow page table, and give it a blank PGD
-         * page. */
+        /*
+         * We start on the first shadow page table, and give it a blank PGD
+         * page.
+         */
         lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
         if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
                 return lg->pgdirs[0].gpgdir;
         lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
         if (!lg->pgdirs[0].pgdir)
                 return -ENOMEM;
+
 #ifdef CONFIG_X86_PAE
+        /* For PAE, we also create the initial mid-level. */
         pgd = lg->pgdirs[0].pgdir;
         pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
         if (!pmd_table)
@@ -921,27 +1080,33 @@ int init_guest_pagetable(struct lguest *lg)
         set_pgd(pgd + SWITCHER_PGD_INDEX,
                 __pgd(__pa(pmd_table) | _PAGE_PRESENT));
 #endif
+
+        /* This is the current page table. */
         lg->cpus[0].cpu_pgd = 0;
         return 0;
 }
 
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
 void page_table_guest_data_init(struct lg_cpu *cpu)
 {
         /* We get the kernel address: above this is all kernel memory. */
         if (get_user(cpu->lg->kernel_address,
                 &cpu->lg->lguest_data->kernel_address)
-                /* We tell the Guest that it can't use the top 2 or 4 MB
-                 * of virtual addresses used by the Switcher. */
+                /*
+                 * We tell the Guest that it can't use the top 2 or 4 MB
+                 * of virtual addresses used by the Switcher.
+                 */
                 || put_user(RESERVE_MEM * 1024 * 1024,
                         &cpu->lg->lguest_data->reserve_mem)
                 || put_user(cpu->lg->pgdirs[0].gpgdir,
                         &cpu->lg->lguest_data->pgdir))
                 kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-        /* In flush_user_mappings() we loop from 0 to
+        /*
+         * In flush_user_mappings() we loop from 0 to
          * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
-         * Switcher mappings, so check that now. */
+         * Switcher mappings, so check that now.
+         */
 #ifdef CONFIG_X86_PAE
         if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
                 pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
@@ -964,12 +1129,14 @@ void free_guest_pagetable(struct lguest *lg)
                 free_page((long)lg->pgdirs[i].pgdir);
 }
 
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
  *
  * The Switcher and the two pages for this CPU need to be visible in the
  * Guest (and not the pages for other CPUs).  We have the appropriate PTE pages
  * for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
         pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -980,30 +1147,38 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
         pmd_t switcher_pmd;
         pmd_t *pmd_table;
 
+        /* FIXME: native_set_pmd is overkill here. */
         native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
                        PAGE_SHIFT, PAGE_KERNEL_EXEC));
 
+        /* Figure out where the pmd page is, by reading the PGD, and converting
+         * it to a virtual address. */
         pmd_table = __va(pgd_pfn(cpu->lg->
                         pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
                                                                 << PAGE_SHIFT);
+        /* Now write it into the shadow page table. */
         native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
 #else
         pgd_t switcher_pgd;
 
-        /* Make the last PGD entry for this Guest point to the Switcher's PTE
-         * page for this CPU (with appropriate flags). */
+        /*
+         * Make the last PGD entry for this Guest point to the Switcher's PTE
+         * page for this CPU (with appropriate flags).
+         */
         switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
         cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
 #endif
-        /* We also change the Switcher PTE page.  When we're running the Guest,
+        /*
+         * We also change the Switcher PTE page.  When we're running the Guest,
          * we want the Guest's "regs" page to appear where the first Switcher
          * page for this CPU is.  This is an optimization: when the Switcher
          * saves the Guest registers, it saves them into the first page of this
          * CPU's "struct lguest_pages": if we make sure the Guest's register
          * page is already mapped there, we don't have to copy them out
-         * again. */
+         * again.
+         */
         pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
         native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
         native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
@@ -1019,10 +1194,12 @@ static void free_switcher_pte_pages(void)
                 free_page((long)switcher_pte_page(i));
 }
 
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
  * the CPU number and the "struct page"s for the Switcher code itself.
  *
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
 static __init void populate_switcher_pte_page(unsigned int cpu,
                                               struct page *switcher_page[],
                                               unsigned int pages)
@@ -1043,13 +1220,16 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
         native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
                          __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
-        /* The second page contains the "struct lguest_ro_state", and is
-         * read-only. */
+        /*
+         * The second page contains the "struct lguest_ro_state", and is
+         * read-only.
+         */
         native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
                            __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
-/* We've made it through the page table code.  Perhaps our tired brains are
+/*
+ * We've made it through the page table code.  Perhaps our tired brains are
  * still processing the details, or perhaps we're simply glad it's over.
  *
  * If nothing else, note that all this complexity in juggling shadow page tables
@@ -1058,10 +1238,13 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
  * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
  * have implemented shadow page table support directly into hardware.
  *
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
 
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
 __init int init_pagetables(struct page **switcher_page, unsigned int pages)
 {
         unsigned int i;
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 482ed5a18750..951c57b0a7e0 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -1,4 +1,5 @@
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
  * which can be used to do funky things with virtual address interpretation.
  * We originally used to use segments so the Guest couldn't alter the
  * Guest<->Host Switcher, and then we had to trim Guest segments, and restore
@@ -8,7 +9,8 @@
  *
  * In these modern times, the segment handling code consists of simple sanity
  * checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
 #include "lg.h"
 
 /*H:600
@@ -41,10 +43,12 @@
  * begin.
  */
 
-/* There are several entries we don't let the Guest set.  The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set.  The TSS entry is the
  * "Task State Segment" which controls all kinds of delicate things.  The
  * LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
 static bool ignored_gdt(unsigned int num)
 {
         return (num == GDT_ENTRY_TSS
@@ -53,42 +57,52 @@ static bool ignored_gdt(unsigned int num)
                 || num == GDT_ENTRY_DOUBLEFAULT_TSS);
 }
 
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little.  We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little.  We
  * don't care if they're invalid: the worst that can happen is a General
  * Protection Fault in the Switcher when it restores a Guest segment register
  * which tries to use that entry.  Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
 static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
 {
         unsigned int i;
 
         for (i = start; i < end; i++) {
-                /* We never copy these ones to real GDT, so we don't care what
-                 * they say */
+                /*
+                 * We never copy these ones to real GDT, so we don't care what
+                 * they say
+                 */
                 if (ignored_gdt(i))
                         continue;
 
-                /* Segment descriptors contain a privilege level: the Guest is
+                /*
+                 * Segment descriptors contain a privilege level: the Guest is
                  * sometimes careless and leaves this as 0, even though it's
-                 * running at privilege level 1.  If so, we fix it here. */
+                 * running at privilege level 1.  If so, we fix it here.
+                 */
                 if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
                         cpu->arch.gdt[i].b |= (GUEST_PL << 13);
 
-                /* Each descriptor has an "accessed" bit.  If we don't set it
+                /*
+                 * Each descriptor has an "accessed" bit.  If we don't set it
                  * now, the CPU will try to set it when the Guest first loads
                  * that entry into a segment register.  But the GDT isn't
-                 * writable by the Guest, so bad things can happen. */
+                 * writable by the Guest, so bad things can happen.
+                 */
                 cpu->arch.gdt[i].b |= 0x00000100;
         }
 }
 
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us.  We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us.  We keep
  * a GDT for each CPU, and copy across the Guest's entries each time we want to
  * run the Guest on that CPU.
  *
  * This routine is called at boot or modprobe time for each CPU to set up the
  * constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
 void setup_default_gdt_entries(struct lguest_ro_state *state)
 {
         struct desc_struct *gdt = state->guest_gdt;
@@ -98,30 +112,37 @@ void setup_default_gdt_entries(struct lguest_ro_state *state)
         gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
         gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 
-        /* The TSS segment refers to the TSS entry for this particular CPU.
+        /*
+         * The TSS segment refers to the TSS entry for this particular CPU.
          * Forgive the magic flags: the 0x8900 means the entry is Present, it's
          * privilege level 0 Available 386 TSS system segment, and the 0x67
-         * means Saturn is eclipsed by Mercury in the twelfth house. */
+         * means Saturn is eclipsed by Mercury in the twelfth house.
+         */
         gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
         gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
                 | ((tss >> 16) & 0x000000FF);
 }
 
-/* This routine sets up the initial Guest GDT for booting.  All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting.  All entries start
+ * as 0 (unusable).
+ */
 void setup_guest_gdt(struct lg_cpu *cpu)
 {
-        /* Start with full 0-4G segments... */
+        /*
+         * Start with full 0-4G segments...except the Guest is allowed to use
+         * them, so set the privilege level appropriately in the flags.
+         */
         cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
         cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
-        /* ...except the Guest is allowed to use them, so set the privilege
-         * level appropriately in the flags. */
         cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
         cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
 }
 
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
 void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
         unsigned int i;
@@ -130,26 +151,34 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
                 gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
 void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
         unsigned int i;
 
-        /* The default entries from setup_default_gdt_entries() are not
-         * replaced.  See ignored_gdt() above. */
+        /*
+         * The default entries from setup_default_gdt_entries() are not
+         * replaced.  See ignored_gdt() above.
+         */
         for (i = 0; i < GDT_ENTRIES; i++)
                 if (!ignored_gdt(i))
                         gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in.
+ */
 void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
-        /* We assume the Guest has the same number of GDT entries as the
-         * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+        /*
+         * We assume the Guest has the same number of GDT entries as the
+         * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+         */
         if (num >= ARRAY_SIZE(cpu->arch.gdt))
                 kill_guest(cpu, "too many gdt entries %i", num);
 
@@ -157,15 +186,19 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
         cpu->arch.gdt[num].a = lo;
         cpu->arch.gdt[num].b = hi;
         fixup_gdt_table(cpu, num, num+1);
-        /* Mark that the GDT changed so the core knows it has to copy it again,
-         * even if the Guest is run on the same CPU. */
+        /*
+         * Mark that the GDT changed so the core knows it has to copy it again,
+         * even if the Guest is run on the same CPU.
+         */
         cpu->changed |= CHANGED_GDT;
 }
 
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
  * Remember that this happens on every context switch, so it's worth
  * optimizing.  But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
 void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
 {
         struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
@@ -175,7 +208,6 @@ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
         /* Note that just the TLS entries have changed. */
         cpu->changed |= CHANGED_GDT_TLS;
 }
-/*:*/
 
 /*H:660
  * With this, we have finished the Host.
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index eaf722fe309a..6ae388849a3b 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,13 +17,15 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-/*P:450 This file contains the x86-specific lguest code.  It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code.  It used to be all
  * mixed in with drivers/lguest/core.c but several foolhardy code slashers
  * wrestled most of the dependencies out to here in preparation for porting
  * lguest to other architectures (see what I mean by foolhardy?).
  *
  * This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
 #include <linux/kernel.h>
 #include <linux/start_kernel.h>
 #include <linux/string.h>
@@ -82,25 +84,33 @@ static DEFINE_PER_CPU(struct lg_cpu *, last_cpu);
  */
 static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
-        /* Copying all this data can be quite expensive.  We usually run the
+        /*
+         * Copying all this data can be quite expensive.  We usually run the
          * same Guest we ran last time (and that Guest hasn't run anywhere else
          * meanwhile).  If that's not the case, we pretend everything in the
-         * Guest has changed. */
+         * Guest has changed.
+         */
         if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
                 __get_cpu_var(last_cpu) = cpu;
                 cpu->last_pages = pages;
                 cpu->changed = CHANGED_ALL;
         }
 
-        /* These copies are pretty cheap, so we do them unconditionally: */
-        /* Save the current Host top-level page directory. */
+        /*
+         * These copies are pretty cheap, so we do them unconditionally: */
+        /* Save the current Host top-level page directory.
+         */
         pages->state.host_cr3 = __pa(current->mm->pgd);
-        /* Set up the Guest's page tables to see this CPU's pages (and no
-         * other CPU's pages). */
+        /*
+         * Set up the Guest's page tables to see this CPU's pages (and no
+         * other CPU's pages).
+         */
         map_switcher_in_guest(cpu, pages);
-        /* Set up the two "TSS" members which tell the CPU what stack to use
+        /*
+         * Set up the two "TSS" members which tell the CPU what stack to use
          * for traps which do directly into the Guest (ie. traps at privilege
-         * level 1). */
+         * level 1).
+         */
         pages->state.guest_tss.sp1 = cpu->esp1;
         pages->state.guest_tss.ss1 = cpu->ss1;
 
@@ -125,97 +135,126 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
         /* This is a dummy value we need for GCC's sake. */
         unsigned int clobber;
 
-        /* Copy the guest-specific information into this CPU's "struct
-         * lguest_pages". */
+        /*
+         * Copy the guest-specific information into this CPU's "struct
+         * lguest_pages".
+         */
         copy_in_guest_info(cpu, pages);
 
-        /* Set the trap number to 256 (impossible value).  If we fault while
+        /*
+         * Set the trap number to 256 (impossible value).  If we fault while
          * switching to the Guest (bad segment registers or bug), this will
-         * cause us to abort the Guest. */
+         * cause us to abort the Guest.
+         */
         cpu->regs->trapnum = 256;
 
-        /* Now: we push the "eflags" register on the stack, then do an "lcall".
+        /*
+         * Now: we push the "eflags" register on the stack, then do an "lcall".
          * This is how we change from using the kernel code segment to using
          * the dedicated lguest code segment, as well as jumping into the
          * Switcher.
          *
          * The lcall also pushes the old code segment (KERNEL_CS) onto the
          * stack, then the address of this call.  This stack layout happens to
-         * exactly match the stack layout created by an interrupt... */
+         * exactly match the stack layout created by an interrupt...
+         */
         asm volatile("pushf; lcall *lguest_entry"
-                     /* This is how we tell GCC that %eax ("a") and %ebx ("b")
-                      * are changed by this routine.  The "=" means output. */
+                     /*
+                      * This is how we tell GCC that %eax ("a") and %ebx ("b")
+                      * are changed by this routine.  The "=" means output.
+                      */
                      : "=a"(clobber), "=b"(clobber)
-                     /* %eax contains the pages pointer.  ("0" refers to the
+                     /*
+                      * %eax contains the pages pointer.  ("0" refers to the
                       * 0-th argument above, ie "a").  %ebx contains the
                       * physical address of the Guest's top-level page
-                      * directory. */
+                      * directory.
+                      */
                      : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
-                     /* We tell gcc that all these registers could change,
+                     /*
+                      * We tell gcc that all these registers could change,
                       * which means we don't have to save and restore them in
-                      * the Switcher. */
+                      * the Switcher.
+                      */
                      : "memory", "%edx", "%ecx", "%edi", "%esi");
 }
 /*:*/
 
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
  * get kicked off the CPU (preempt_notifier_register()).  This would allow us
  * to lazily disable SYSENTER which would regain some performance, and should
  * also simplify copy_in_guest_info().  Note that we'd still need to restore
  * things when we exit to Launcher userspace, but that's fairly easy.
  *
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
  *
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
 
-/*H:040 This is the i386-specific code to setup and run the Guest.  Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest.  Interrupts
+ * are disabled: we own the CPU.
+ */
 void lguest_arch_run_guest(struct lg_cpu *cpu)
 {
-        /* Remember the awfully-named TS bit?  If the Guest has asked to set it
+        /*
+         * Remember the awfully-named TS bit?  If the Guest has asked to set it
          * we set it now, so we can trap and pass that trap to the Guest if it
-         * uses the FPU. */
+         * uses the FPU.
+         */
         if (cpu->ts)
                 unlazy_fpu(current);
 
-        /* SYSENTER is an optimized way of doing system calls.  We can't allow
+        /*
+         * SYSENTER is an optimized way of doing system calls.  We can't allow
          * it because it always jumps to privilege level 0.  A normal Guest
          * won't try it because we don't advertise it in CPUID, but a malicious
          * Guest (or malicious Guest userspace program) could, so we tell the
-         * CPU to disable it before running the Guest. */
+         * CPU to disable it before running the Guest.
+         */
         if (boot_cpu_has(X86_FEATURE_SEP))
                 wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
 
-        /* Now we actually run the Guest.  It will return when something
+        /*
+         * Now we actually run the Guest.  It will return when something
          * interesting happens, and we can examine its registers to see what it
-         * was doing. */
+         * was doing.
+         */
         run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
 
-        /* Note that the "regs" structure contains two extra entries which are
+        /*
+         * Note that the "regs" structure contains two extra entries which are
          * not really registers: a trap number which says what interrupt or
          * trap made the switcher code come back, and an error code which some
-         * traps set.  */
+         * traps set.
+         */
 
          /* Restore SYSENTER if it's supposed to be on. */
          if (boot_cpu_has(X86_FEATURE_SEP))
                 wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
 
-        /* If the Guest page faulted, then the cr2 register will tell us the
+        /*
+         * If the Guest page faulted, then the cr2 register will tell us the
          * bad virtual address.  We have to grab this now, because once we
          * re-enable interrupts an interrupt could fault and thus overwrite
-         * cr2, or we could even move off to a different CPU. */
+         * cr2, or we could even move off to a different CPU.
+         */
         if (cpu->regs->trapnum == 14)
                 cpu->arch.last_pagefault = read_cr2();
-        /* Similarly, if we took a trap because the Guest used the FPU,
+        /*
+         * Similarly, if we took a trap because the Guest used the FPU,
          * we have to restore the FPU it expects to see.
          * math_state_restore() may sleep and we may even move off to
          * a different CPU. So all the critical stuff should be done
-         * before this.  */
+         * before this.
+         */
         else if (cpu->regs->trapnum == 7)
                 math_state_restore();
 }
 
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
  * Our Guest is usually so well behaved; it never tries to do things it isn't
  * allowed to, and uses hypercalls instead.  Unfortunately, Linux's paravirtual
  * infrastructure isn't quite complete, because it doesn't contain replacements
@@ -225,26 +264,33 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
  *
  * When the Guest uses one of these instructions, we get a trap (General
  * Protection Fault) and come here.  We see if it's one of those troublesome
- * instructions and skip over it.  We return true if we did. */
+ * instructions and skip over it.  We return true if we did.
+ */
 static int emulate_insn(struct lg_cpu *cpu)
 {
         u8 insn;
         unsigned int insnlen = 0, in = 0, shift = 0;
-        /* The eip contains the *virtual* address of the Guest's instruction:
-         * guest_pa just subtracts the Guest's page_offset. */
+        /*
+         * The eip contains the *virtual* address of the Guest's instruction:
+         * guest_pa just subtracts the Guest's page_offset.
+         */
         unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
 
-        /* This must be the Guest kernel trying to do something, not userspace!
+        /*
+         * This must be the Guest kernel trying to do something, not userspace!
          * The bottom two bits of the CS segment register are the privilege
-         * level. */
+         * level.
+         */
         if ((cpu->regs->cs & 3) != GUEST_PL)
                 return 0;
 
         /* Decoding x86 instructions is icky. */
         insn = lgread(cpu, physaddr, u8);
 
-        /* 0x66 is an "operand prefix".  It means it's using the upper 16 bits
-           of the eax register. */
+        /*
+         * 0x66 is an "operand prefix".  It means it's using the upper 16 bits
+         * of the eax register.
+         */
         if (insn == 0x66) {
                 shift = 16;
                 /* The instruction is 1 byte so far, read the next byte. */
@@ -252,8 +298,10 @@ static int emulate_insn(struct lg_cpu *cpu)
                 insn = lgread(cpu, physaddr + insnlen, u8);
         }
 
-        /* We can ignore the lower bit for the moment and decode the 4 opcodes
-         * we need to emulate. */
+        /*
+         * We can ignore the lower bit for the moment and decode the 4 opcodes
+         * we need to emulate.
+         */
         switch (insn & 0xFE) {
         case 0xE4: /* in     <next byte>,%al */
                 insnlen += 2;
@@ -274,9 +322,11 @@ static int emulate_insn(struct lg_cpu *cpu)
                 return 0;
         }
 
-        /* If it was an "IN" instruction, they expect the result to be read
+        /*
+         * If it was an "IN" instruction, they expect the result to be read
          * into %eax, so we change %eax.  We always return all-ones, which
-         * traditionally means "there's nothing there". */
+         * traditionally means "there's nothing there".
+         */
         if (in) {
                 /* Lower bit tells is whether it's a 16 or 32 bit access */
                 if (insn & 0x1)
@@ -290,7 +340,8 @@ static int emulate_insn(struct lg_cpu *cpu)
         return 1;
 }
 
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
  * After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
  * change over to using kvm hypercalls.
  *
@@ -318,16 +369,20 @@ static int emulate_insn(struct lg_cpu *cpu)
  */
 static void rewrite_hypercall(struct lg_cpu *cpu)
 {
-        /* This are the opcodes we use to patch the Guest.  The opcode for "int
+        /*
+         * This are the opcodes we use to patch the Guest.  The opcode for "int
          * $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
-         * complete the sequence with a NOP (0x90). */
+         * complete the sequence with a NOP (0x90).
+         */
         u8 insn[3] = {0xcd, 0x1f, 0x90};
 
         __lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
-        /* The above write might have caused a copy of that page to be made
+        /*
+         * The above write might have caused a copy of that page to be made
          * (if it was read-only).  We need to make sure the Guest has
          * up-to-date pagetables.  As this doesn't happen often, we can just
-         * drop them all. */
+         * drop them all.
+         */
         guest_pagetable_clear_all(cpu);
 }
 
@@ -335,9 +390,11 @@ static bool is_hypercall(struct lg_cpu *cpu)
 {
         u8 insn[3];
 
-        /* This must be the Guest kernel trying to do something.
+        /*
+         * This must be the Guest kernel trying to do something.
          * The bottom two bits of the CS segment register are the privilege
-         * level. */
+         * level.
+         */
         if ((cpu->regs->cs & 3) != GUEST_PL)
                 return false;
 
@@ -351,86 +408,105 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
 {
         switch (cpu->regs->trapnum) {
         case 13: /* We've intercepted a General Protection Fault. */
-                /* Check if this was one of those annoying IN or OUT
+                /*
+                 * Check if this was one of those annoying IN or OUT
                  * instructions which we need to emulate.  If so, we just go
-                 * back into the Guest after we've done it. */
+                 * back into the Guest after we've done it.
+                 */
                 if (cpu->regs->errcode == 0) {
                         if (emulate_insn(cpu))
                                 return;
                 }
-                /* If KVM is active, the vmcall instruction triggers a
-                 * General Protection Fault.  Normally it triggers an
-                 * invalid opcode fault (6): */
+                /*
+                 * If KVM is active, the vmcall instruction triggers a General
+                 * Protection Fault.  Normally it triggers an invalid opcode
+                 * fault (6):
+                 */
         case 6:
-                /* We need to check if ring == GUEST_PL and
-                 * faulting instruction == vmcall. */
+                /*
+                 * We need to check if ring == GUEST_PL and faulting
+                 * instruction == vmcall.
+                 */
                 if (is_hypercall(cpu)) {
                         rewrite_hypercall(cpu);
                         return;
                 }
                 break;
         case 14: /* We've intercepted a Page Fault. */
-                /* The Guest accessed a virtual address that wasn't mapped.
+                /*
+                 * The Guest accessed a virtual address that wasn't mapped.
                  * This happens a lot: we don't actually set up most of the page
                  * tables for the Guest at all when we start: as it runs it asks
                  * for more and more, and we set them up as required. In this
                  * case, we don't even tell the Guest that the fault happened.
                  *
                  * The errcode tells whether this was a read or a write, and
-                 * whether kernel or userspace code. */
+                 * whether kernel or userspace code.
+                 */
                 if (demand_page(cpu, cpu->arch.last_pagefault,
                                 cpu->regs->errcode))
                         return;
 
-                /* OK, it's really not there (or not OK): the Guest needs to
+                /*
+                 * OK, it's really not there (or not OK): the Guest needs to
                  * know.  We write out the cr2 value so it knows where the
                  * fault occurred.
                  *
                  * Note that if the Guest were really messed up, this could
                  * happen before it's done the LHCALL_LGUEST_INIT hypercall, so
-                 * lg->lguest_data could be NULL */
+                 * lg->lguest_data could be NULL
+                 */
                 if (cpu->lg->lguest_data &&
                     put_user(cpu->arch.last_pagefault,
                              &cpu->lg->lguest_data->cr2))
                         kill_guest(cpu, "Writing cr2");
                 break;
         case 7: /* We've intercepted a Device Not Available fault. */
-                /* If the Guest doesn't want to know, we already restored the
-                 * Floating Point Unit, so we just continue without telling
-                 * it. */
+                /*
+                 * If the Guest doesn't want to know, we already restored the
+                 * Floating Point Unit, so we just continue without telling it.
+                 */
                 if (!cpu->ts)
                         return;
                 break;
         case 32 ... 255:
-                /* These values mean a real interrupt occurred, in which case
+                /*
+                 * These values mean a real interrupt occurred, in which case
                  * the Host handler has already been run. We just do a
                  * friendly check if another process should now be run, then
-                 * return to run the Guest again */
+                 * return to run the Guest again
+                 */
                 cond_resched();
                 return;
         case LGUEST_TRAP_ENTRY:
-                /* Our 'struct hcall_args' maps directly over our regs: we set
-                 * up the pointer now to indicate a hypercall is pending. */
+                /*
+                 * Our 'struct hcall_args' maps directly over our regs: we set
+                 * up the pointer now to indicate a hypercall is pending.
+                 */
                 cpu->hcall = (struct hcall_args *)cpu->regs;
                 return;
         }
 
         /* We didn't handle the trap, so it needs to go to the Guest. */
         if (!deliver_trap(cpu, cpu->regs->trapnum))
-                /* If the Guest doesn't have a handler (either it hasn't
+                /*
+                 * If the Guest doesn't have a handler (either it hasn't
                  * registered any yet, or it's one of the faults we don't let
-                 * it handle), it dies with this cryptic error message. */
+                 * it handle), it dies with this cryptic error message.
+                 */
                 kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
                            cpu->regs->trapnum, cpu->regs->eip,
                            cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
                            : cpu->regs->errcode);
 }
 
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
  * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
  * deliver_trap() and demand_page().  After all those, we'll be ready to
  * examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
 static void adjust_pge(void *on)
 {
         if (on)
@@ -439,13 +515,16 @@ static void adjust_pge(void *on)
                 write_cr4(read_cr4() & ~X86_CR4_PGE);
 }
 
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
 void __init lguest_arch_host_init(void)
 {
         int i;
 
-        /* Most of the i386/switcher.S doesn't care that it's been moved; on
+        /*
+         * Most of the i386/switcher.S doesn't care that it's been moved; on
          * Intel, jumps are relative, and it doesn't access any references to
          * external code or data.
          *
@@ -453,7 +532,8 @@ void __init lguest_arch_host_init(void)
          * addresses are placed in a table (default_idt_entries), so we need to
          * update the table with the new addresses.  switcher_offset() is a
          * convenience function which returns the distance between the
-         * compiled-in switcher code and the high-mapped copy we just made. */
+         * compiled-in switcher code and the high-mapped copy we just made.
+         */
         for (i = 0; i < IDT_ENTRIES; i++)
                 default_idt_entries[i] += switcher_offset();
 
@@ -468,63 +548,81 @@ void __init lguest_arch_host_init(void)
         for_each_possible_cpu(i) {
                 /* lguest_pages() returns this CPU's two pages. */
                 struct lguest_pages *pages = lguest_pages(i);
-                /* This is a convenience pointer to make the code fit one
-                 * statement to a line. */
+                /* This is a convenience pointer to make the code neater. */
                 struct lguest_ro_state *state = &pages->state;
 
-                /* The Global Descriptor Table: the Host has a different one
+                /*
+                 * The Global Descriptor Table: the Host has a different one
                  * for each CPU.  We keep a descriptor for the GDT which says
                  * where it is and how big it is (the size is actually the last
-                 * byte, not the size, hence the "-1"). */
+                 * byte, not the size, hence the "-1").
+                 */
                 state->host_gdt_desc.size = GDT_SIZE-1;
                 state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
 
-                /* All CPUs on the Host use the same Interrupt Descriptor
+                /*
+                 * All CPUs on the Host use the same Interrupt Descriptor
                  * Table, so we just use store_idt(), which gets this CPU's IDT
-                 * descriptor. */
+                 * descriptor.
+                 */
                 store_idt(&state->host_idt_desc);
 
-                /* The descriptors for the Guest's GDT and IDT can be filled
+                /*
+                 * The descriptors for the Guest's GDT and IDT can be filled
                  * out now, too.  We copy the GDT & IDT into ->guest_gdt and
-                 * ->guest_idt before actually running the Guest. */
+                 * ->guest_idt before actually running the Guest.
+                 */
                 state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
                 state->guest_idt_desc.address = (long)&state->guest_idt;
                 state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
                 state->guest_gdt_desc.address = (long)&state->guest_gdt;
 
-                /* We know where we want the stack to be when the Guest enters
+                /*
+                 * We know where we want the stack to be when the Guest enters
                  * the Switcher: in pages->regs.  The stack grows upwards, so
-                 * we start it at the end of that structure. */
+                 * we start it at the end of that structure.
+                 */
                 state->guest_tss.sp0 = (long)(&pages->regs + 1);
-                /* And this is the GDT entry to use for the stack: we keep a
-                 * couple of special LGUEST entries. */
+                /*
+                 * And this is the GDT entry to use for the stack: we keep a
+                 * couple of special LGUEST entries.
+                 */
                 state->guest_tss.ss0 = LGUEST_DS;
 
-                /* x86 can have a finegrained bitmap which indicates what I/O
+                /*
+                 * x86 can have a finegrained bitmap which indicates what I/O
                  * ports the process can use.  We set it to the end of our
-                 * structure, meaning "none". */
+                 * structure, meaning "none".
+                 */
                 state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
 
-                /* Some GDT entries are the same across all Guests, so we can
-                 * set them up now. */
+                /*
+                 * Some GDT entries are the same across all Guests, so we can
+                 * set them up now.
+                 */
                 setup_default_gdt_entries(state);
                 /* Most IDT entries are the same for all Guests, too.*/
                 setup_default_idt_entries(state, default_idt_entries);
 
-                /* The Host needs to be able to use the LGUEST segments on this
-                 * CPU, too, so put them in the Host GDT. */
+                /*
+                 * The Host needs to be able to use the LGUEST segments on this
+                 * CPU, too, so put them in the Host GDT.
+                 */
                 get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
                 get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
         }
 
-        /* In the Switcher, we want the %cs segment register to use the
+        /*
+         * In the Switcher, we want the %cs segment register to use the
          * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
          * it will be undisturbed when we switch.  To change %cs and jump we
-         * need this structure to feed to Intel's "lcall" instruction. */
+         * need this structure to feed to Intel's "lcall" instruction.
+         */
         lguest_entry.offset = (long)switch_to_guest + switcher_offset();
         lguest_entry.segment = LGUEST_CS;
 
-        /* Finally, we need to turn off "Page Global Enable".  PGE is an
+        /*
+         * Finally, we need to turn off "Page Global Enable".  PGE is an
          * optimization where page table entries are specially marked to show
          * they never change.  The Host kernel marks all the kernel pages this
          * way because it's always present, even when userspace is running.
@@ -534,16 +632,21 @@ void __init lguest_arch_host_init(void)
          * you'll get really weird bugs that you'll chase for two days.
          *
          * I used to turn PGE off every time we switched to the Guest and back
-         * on when we return, but that slowed the Switcher down noticibly. */
+         * on when we return, but that slowed the Switcher down noticibly.
+         */
 
-        /* We don't need the complexity of CPUs coming and going while we're
-         * doing this. */
+        /*
+         * We don't need the complexity of CPUs coming and going while we're
+         * doing this.
+         */
         get_online_cpus();
         if (cpu_has_pge) { /* We have a broader idea of "global". */
                 /* Remember that this was originally set (for cleanup). */
                 cpu_had_pge = 1;
-                /* adjust_pge is a helper function which sets or unsets the PGE
-                 * bit on its CPU, depending on the argument (0 == unset). */
+                /*
+                 * adjust_pge is a helper function which sets or unsets the PGE
+                 * bit on its CPU, depending on the argument (0 == unset).
+                 */
                 on_each_cpu(adjust_pge, (void *)0, 1);
                 /* Turn off the feature in the global feature set. */
                 clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
@@ -590,26 +693,32 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 {
         u32 tsc_speed;
 
-        /* The pointer to the Guest's "struct lguest_data" is the only argument.
-         * We check that address now. */
+        /*
+         * The pointer to the Guest's "struct lguest_data" is the only argument.
+         * We check that address now.
+         */
         if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
                                sizeof(*cpu->lg->lguest_data)))
                 return -EFAULT;
 
-        /* Having checked it, we simply set lg->lguest_data to point straight
+        /*
+         * Having checked it, we simply set lg->lguest_data to point straight
          * into the Launcher's memory at the right place and then use
          * copy_to_user/from_user from now on, instead of lgread/write.  I put
          * this in to show that I'm not immune to writing stupid
-         * optimizations. */
+         * optimizations.
+         */
         cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
 
-        /* We insist that the Time Stamp Counter exist and doesn't change with
+        /*
+         * We insist that the Time Stamp Counter exist and doesn't change with
          * cpu frequency.  Some devious chip manufacturers decided that TSC
          * changes could be handled in software.  I decided that time going
          * backwards might be good for benchmarks, but it's bad for users.
          *
          * We also insist that the TSC be stable: the kernel detects unreliable
-         * TSCs for its own purposes, and we use that here. */
+         * TSCs for its own purposes, and we use that here.
+         */
         if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
                 tsc_speed = tsc_khz;
         else
@@ -625,38 +734,47 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 }
 /*:*/
 
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
  *
  * Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
 void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
 {
         struct lguest_regs *regs = cpu->regs;
 
-        /* There are four "segment" registers which the Guest needs to boot:
+        /*
+         * There are four "segment" registers which the Guest needs to boot:
          * The "code segment" register (cs) refers to the kernel code segment
          * __KERNEL_CS, and the "data", "extra" and "stack" segment registers
          * refer to the kernel data segment __KERNEL_DS.
          *
          * The privilege level is packed into the lower bits.  The Guest runs
-         * at privilege level 1 (GUEST_PL).*/
+         * at privilege level 1 (GUEST_PL).
+         */
         regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
         regs->cs = __KERNEL_CS|GUEST_PL;
 
-        /* The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
+        /*
+         * The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
          * is supposed to always be "1".  Bit 9 (0x200) controls whether
          * interrupts are enabled.  We always leave interrupts enabled while
-         * running the Guest. */
+         * running the Guest.
+         */
         regs->eflags = X86_EFLAGS_IF | 0x2;
 
-        /* The "Extended Instruction Pointer" register says where the Guest is
-         * running. */
+        /*
+         * The "Extended Instruction Pointer" register says where the Guest is
+         * running.
+         */
         regs->eip = start;
 
-        /* %esi points to our boot information, at physical address 0, so don't
-         * touch it. */
+        /*
+         * %esi points to our boot information, at physical address 0, so don't
+         * touch it.
+         */
 
-        /* There are a couple of GDT entries the Guest expects when first
-         * booting. */
+        /* There are a couple of GDT entries the Guest expects at boot. */
         setup_guest_gdt(cpu);
 }
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 3fc15318a80f..40634b0db9f7 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,12 +1,15 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch.  It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch.  It is as
+ * simple as it can be made, but it's naturally very specific to x86.
  *
  * You have now completed Preparation.  If this has whet your appetite; if you
  * are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
 
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
  * gain at least 1% more performance.  Since neither LOC nor performance can be
  * measured beforehand, it generally means implementing a feature then deciding
  * if it's worth it.  And once it's implemented, who can say no?
@@ -31,11 +34,14 @@
  * Host (which is actually really easy).
  *
  * Two questions remain.  Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
 
-/*M:011 Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
  * code).  It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
 
 /*S:100
  * Welcome to the Switcher itself!
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 529e2ba505c3..ed1038164019 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1318,7 +1318,7 @@ static int crypt_iterate_devices(struct dm_target *ti,
 {
         struct crypt_config *cc = ti->private;
 
-        return fn(ti, cc->dev, cc->start, data);
+        return fn(ti, cc->dev, cc->start, ti->len, data);
 }
 
 static struct target_type crypt_target = {
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 4e5b843cd4d7..ebe7381f47c8 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -324,12 +324,12 @@ static int delay_iterate_devices(struct dm_target *ti,
         struct delay_c *dc = ti->private;
         int ret = 0;
 
-        ret = fn(ti, dc->dev_read, dc->start_read, data);
+        ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
         if (ret)
                 goto out;
 
         if (dc->dev_write)
-                ret = fn(ti, dc->dev_write, dc->start_write, data);
+                ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
 
 out:
         return ret;
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 9184b6deb868..82f7d6e6b1ea 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -139,7 +139,7 @@ static int linear_iterate_devices(struct dm_target *ti,
 {
         struct linear_c *lc = ti->private;
 
-        return fn(ti, lc->dev, lc->start, data);
+        return fn(ti, lc->dev, lc->start, ti->len, data);
 }
 
 static struct target_type linear_target = {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c70604a20897..6f0d90d4a541 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1453,7 +1453,7 @@ static int multipath_iterate_devices(struct dm_target *ti,
 
         list_for_each_entry(pg, &m->priority_groups, list) {
                 list_for_each_entry(p, &pg->pgpaths, list) {
-                        ret = fn(ti, p->path.dev, ti->begin, data);
+                        ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
                         if (ret)
                                 goto out;
                 }
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ce8868c768cc..9726577cde49 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -638,6 +638,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes)
                 spin_lock_irq(&ms->lock);
                 bio_list_merge(&ms->writes, &requeue);
                 spin_unlock_irq(&ms->lock);
+                delayed_wake(ms);
         }
 
         /*
@@ -1292,7 +1293,7 @@ static int mirror_iterate_devices(struct dm_target *ti,
 
         for (i = 0; !ret && i < ms->nr_mirrors; i++)
                 ret = fn(ti, ms->mirror[i].dev,
-                         ms->mirror[i].offset, data);
+                         ms->mirror[i].offset, ti->len, data);
 
         return ret;
 }
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b240e85ae39a..4e0e5937e42a 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,10 +320,11 @@ static int stripe_iterate_devices(struct dm_target *ti,
         int ret = 0;
         unsigned i = 0;
 
-        do
+        do {
                 ret = fn(ti, sc->stripe[i].dev,
-                         sc->stripe[i].physical_start, data);
-        while (!ret && ++i < sc->stripes);
+                         sc->stripe[i].physical_start,
+                         sc->stripe_width, data);
+        } while (!ret && ++i < sc->stripes);
 
         return ret;
 }
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 2cba557d9e61..d952b3441913 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -346,7 +346,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md)
  * If possible, this checks an area of a destination device is valid.
  */
 static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
-                                sector_t start, void *data)
+                                sector_t start, sector_t len, void *data)
 {
         struct queue_limits *limits = data;
         struct block_device *bdev = dev->bdev;
@@ -359,7 +359,7 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
         if (!dev_size)
                 return 1;
 
-        if ((start >= dev_size) || (start + ti->len > dev_size)) {
+        if ((start >= dev_size) || (start + len > dev_size)) {
                 DMWARN("%s: %s too small for target",
                        dm_device_name(ti->table->md), bdevname(bdev, b));
                 return 0;
@@ -377,11 +377,11 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
                 return 0;
         }
 
-        if (ti->len & (logical_block_size_sectors - 1)) {
+        if (len & (logical_block_size_sectors - 1)) {
                 DMWARN("%s: len=%llu not aligned to h/w "
                        "logical block size %hu of %s",
                        dm_device_name(ti->table->md),
-                       (unsigned long long)ti->len,
+                       (unsigned long long)len,
                        limits->logical_block_size, bdevname(bdev, b));
                 return 0;
         }
@@ -482,7 +482,7 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti,
 #define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
 
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-                         sector_t start, void *data)
+                         sector_t start, sector_t len, void *data)
 {
         struct queue_limits *limits = data;
         struct block_device *bdev = dev->bdev;
@@ -830,11 +830,6 @@ unsigned dm_table_get_type(struct dm_table *t)
         return t->type;
 }
 
-bool dm_table_bio_based(struct dm_table *t)
-{
-        return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
-}
-
 bool dm_table_request_based(struct dm_table *t)
 {
         return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9acd54a5cffb..8a311ea0d441 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2203,16 +2203,6 @@ int dm_swap_table(struct mapped_device *md, struct dm_table *table)
                 goto out;
         }
 
-        /*
-         * It is enought that blk_queue_ordered() is called only once when
-         * the first bio-based table is bound.
-         *
-         * This setting should be moved to alloc_dev() when request-based dm
-         * supports barrier.
-         */
-        if (!md->map && dm_table_bio_based(table))
-                blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
-
         __unbind(md);
         r = __bind(md, table, &limits);
 
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 23278ae80f08..a7663eba17e2 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -61,7 +61,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits);
 int dm_table_any_busy_target(struct dm_table *t);
 int dm_table_set_type(struct dm_table *t);
 unsigned dm_table_get_type(struct dm_table *t);
-bool dm_table_bio_based(struct dm_table *t);
 bool dm_table_request_based(struct dm_table *t);
 int dm_table_alloc_md_mempools(struct dm_table *t);
 void dm_table_free_md_mempools(struct dm_table *t);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index efb4a6c2b57a..9a6307a347b2 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+        (defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
         struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-        || defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
         struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc,
         }
         return 0;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
         u32 srate, u32 ratio)
 {
@@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
         }
         return 0;
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
         .demod_address = 0x53,
         .invert = 1,
@@ -385,10 +394,12 @@ fail:
         fc->fc_i2c_adap[0].no_base_addr = 0;
         return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
         .demod_address = 0x55,
         .dont_use_pll = 1,
@@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
          * IR-receiver (PIC16F818) - but the card has no input for that ??? */
         return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
         static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
         }
         return 0;
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
         const struct firmware **fw, char* name)
 {
@@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
         fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
         return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
         .demod_address = 0x0a,
 };
@@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
         return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
                             DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
         .demod_address       = 0x59,
         .demod_chip          = LGDT3303,
@@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
         return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
                             TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
                 struct dvb_frontend_parameters *fep)
 {
@@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc,
         fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
         return 1;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
         flexcop_device_type_t type;
         int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
         { FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
         { FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
         { FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
         { FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
         { FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
         { FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
         { FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
         { FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
         { FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
         int i;
         for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+                if (!flexcop_frontends[i].attach)
+                        continue;
                 /* type needs to be set before, because of some workarounds
                  * done based on the probed card type */
                 fc->dev_type = flexcop_frontends[i].type;
diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c
index 4601b059b2b2..0e246eaad05a 100644
--- a/drivers/media/dvb/bt8xx/dst_ca.c
+++ b/drivers/media/dvb/bt8xx/dst_ca.c
@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/dvb/ca.h>
 #include "dvbdev.h"
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 79927305e84d..487919bea7ae 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -27,7 +27,6 @@
 #include <linux/poll.h>
 #include <linux/fs.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 
 #define DVB_MAJOR 212
 
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 136c5863d81b..12e018b4107d 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -527,6 +527,10 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
         u8 i, buf[3] = {0, 0, 0};
         *auto_mode = 0; /* set if parameters are requested to auto set */
 
+        /* Try auto-detect transmission parameters in case of AUTO requested or
+           garbage parameters given by application for compatibility.
+           MPlayer seems to provide garbage parameters currently. */
+
         switch (params->transmission_mode) {
         case TRANSMISSION_MODE_AUTO:
                 *auto_mode = 1;
@@ -536,7 +540,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[0] |= (1 << 0);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid transmission_mode\n", __func__);
+                *auto_mode = 1;
         }
 
         switch (params->guard_interval) {
@@ -554,7 +559,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[0] |= (3 << 2);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid guard_interval\n", __func__);
+                *auto_mode = 1;
         }
 
         switch (params->hierarchy_information) {
@@ -572,7 +578,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[0] |= (3 << 4);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid hierarchy_information\n", __func__);
+                *auto_mode = 1;
         };
 
         switch (params->constellation) {
@@ -587,7 +594,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[1] |= (2 << 6);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid constellation\n", __func__);
+                *auto_mode = 1;
         }
 
         /* Use HP. How and which case we can switch to LP? */
@@ -611,7 +619,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[2] |= (4 << 0);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid code_rate_HP\n", __func__);
+                *auto_mode = 1;
         }
 
         switch (params->code_rate_LP) {
@@ -638,7 +647,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 if (params->hierarchy_information == HIERARCHY_AUTO)
                         break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid code_rate_LP\n", __func__);
+                *auto_mode = 1;
         }
 
         switch (params->bandwidth) {
@@ -651,7 +661,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
                 buf[1] |= (2 << 2);
                 break;
         default:
-                return -EINVAL;
+                deb_info("%s: invalid bandwidth\n", __func__);
+                buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
         }
 
         /* program */
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index d1d959ed37b7..8d65c652ba50 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -36,7 +36,6 @@
 #include <linux/fs.h>
 #include <linux/timer.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index 837467f93805..575bf9d89419 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,6 +58,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index 46d216329611..e85f318b4d2b 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -127,6 +127,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index fdb4adff3d28..ca6558c394be 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3324,8 +3324,6 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
-        int addr=ADDR_UNSET;
-
         btv->tuner_type = UNSET;
 
         if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3470,9 +3468,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
         btv->pll.pll_current = -1;
 
         /* tuner configuration (from card list / autodetect / insmod option) */
-        if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
-                addr = bttv_tvcards[btv->c.type].tuner_addr;
-
         if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
                 if (UNSET == btv->tuner_type)
                         btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3496,40 +3491,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
         if (UNSET == btv->tuner_type)
                 btv->tuner_type = TUNER_ABSENT;
 
-        if (btv->tuner_type != TUNER_ABSENT) {
-                struct tuner_setup tun_setup;
-
-                /* Load tuner module before issuing tuner config call! */
-                if (bttv_tvcards[btv->c.type].has_radio)
-                        v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-                                &btv->c.i2c_adap, "tuner", "tuner",
-                                v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-                v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-                                &btv->c.i2c_adap, "tuner", "tuner",
-                                v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-                v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-                                &btv->c.i2c_adap, "tuner", "tuner",
-                                v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
-                tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-                tun_setup.type = btv->tuner_type;
-                tun_setup.addr = addr;
-
-                if (bttv_tvcards[btv->c.type].has_radio)
-                        tun_setup.mode_mask |= T_RADIO;
-
-                bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
-        }
-
-        if (btv->tda9887_conf) {
-                struct v4l2_priv_tun_config tda9887_cfg;
-
-                tda9887_cfg.tuner = TUNER_TDA9887;
-                tda9887_cfg.priv = &btv->tda9887_conf;
-
-                bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
-        }
-
         btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
                    bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
         btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3540,15 +3501,15 @@ void __devinit bttv_init_card2(struct bttv *btv)
                 btv->has_remote = remote[btv->c.nr];
 
         if (bttv_tvcards[btv->c.type].has_radio)
-                btv->has_radio=1;
+                btv->has_radio = 1;
         if (bttv_tvcards[btv->c.type].has_remote)
-                btv->has_remote=1;
+                btv->has_remote = 1;
         if (!bttv_tvcards[btv->c.type].no_gpioirq)
-                btv->gpioirq=1;
+                btv->gpioirq = 1;
         if (bttv_tvcards[btv->c.type].volume_gpio)
-                btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+                btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
         if (bttv_tvcards[btv->c.type].audio_mode_gpio)
-                btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+                btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
 
         if (btv->tuner_type == TUNER_ABSENT)
                 return;  /* no tuner or related drivers to load */
@@ -3666,6 +3627,49 @@ no_audio:
 }
 
 
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+        int addr = ADDR_UNSET;
+
+        if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+                addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+        if (btv->tuner_type != TUNER_ABSENT) {
+                struct tuner_setup tun_setup;
+
+                /* Load tuner module before issuing tuner config call! */
+                if (bttv_tvcards[btv->c.type].has_radio)
+                        v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+                                &btv->c.i2c_adap, "tuner", "tuner",
+                                v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+                v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+                                &btv->c.i2c_adap, "tuner", "tuner",
+                                v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+                v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+                                &btv->c.i2c_adap, "tuner", "tuner",
+                                v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+                tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+                tun_setup.type = btv->tuner_type;
+                tun_setup.addr = addr;
+
+                if (bttv_tvcards[btv->c.type].has_radio)
+                        tun_setup.mode_mask |= T_RADIO;
+
+                bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+        }
+
+        if (btv->tda9887_conf) {
+                struct v4l2_priv_tun_config tda9887_cfg;
+
+                tda9887_cfg.tuner = TUNER_TDA9887;
+                tda9887_cfg.priv = &btv->tda9887_conf;
+
+                bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+        }
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void modtec_eeprom(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 5eb1464af670..8cc6dd28d6a7 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -41,6 +41,7 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include "bttvp.h"
@@ -4418,6 +4419,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 
         /* some card-specific stuff (needs working i2c) */
         bttv_init_card2(btv);
+        bttv_init_tuner(btv);
         init_irqreg(btv);
 
         /* register video4linux + input */
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 3d36daf206f3..3ec2402c6b4a 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -283,6 +283,7 @@ extern struct tvcard bttv_tvcards[];
 extern void bttv_idcard(struct bttv *btv);
 extern void bttv_init_card1(struct bttv *btv);
 extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
 
 /* card-specific funtions */
 extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 2943bfd32a94..e0cf21e0b1bf 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
@@ -57,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
 
 #define dprintk(level, fmt, arg...)\
         do { if (v4l_debug >= level) \
-                printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+                printk(KERN_DEBUG "%s: " fmt, \
+                (dev) ? dev->name : "cx23885[?]", ## arg); \
         } while (0)
 
 static struct cx23885_tvnorm cx23885_tvnorms[] = {
@@ -1676,6 +1678,7 @@ static struct v4l2_file_operations mpeg_fops = {
         .read          = mpeg_read,
         .poll          = mpeg_poll,
         .mmap          = mpeg_mmap,
+        .ioctl         = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 70836af3ab48..5d6093336300 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,6 +26,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 44eacfb0d0d6..356d6896da3f 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
+#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index b12770848c00..2bb54c3ef5cd 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,6 +31,7 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index ec2f45dde164..0664d111085f 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ebd24a25fb85..320f1f60276e 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -58,8 +58,6 @@ static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
 
-#define MT9V011_VERSION                 0x8243
-
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
 static unsigned long em28xx_devused;
 
@@ -159,6 +157,20 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
         { -1,                   -1,     -1,             -1},
 };
 
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+        {EM28XX_R08_GPIO,       0xfd,   ~EM_GPIO_4,     10},
+        {       -1,             -1,     -1,             -1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+        {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
+        {EM2880_R04_GPO,        0x04,   0xff,          100},/* zl10353 reset */
+        {EM2880_R04_GPO,        0x0c,   0xff,            1},
+        {       -1,             -1,     -1,             -1},
+};
+
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
@@ -205,13 +217,15 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = {
  */
 struct em28xx_board em28xx_boards[] = {
         [EM2750_BOARD_UNKNOWN] = {
-                .name          = "Unknown EM2750/EM2751 webcam grabber",
+                .name          = "EM2710/EM2750/EM2751 webcam grabber",
                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-                .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
+                .tuner_type    = TUNER_ABSENT,
+                .is_webcam     = 1,
                 .input         = { {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = 0,
                         .amux     = EM28XX_AMUX_VIDEO,
+                        .gpio     = silvercrest_reg_seq,
                 } },
         },
         [EM2800_BOARD_UNKNOWN] = {
@@ -233,13 +247,15 @@ struct em28xx_board em28xx_boards[] = {
         [EM2820_BOARD_UNKNOWN] = {
                 .name          = "Unknown EM2750/28xx video grabber",
                 .tuner_type    = TUNER_ABSENT,
+                .is_webcam     = 1,     /* To enable sensor probe */
         },
         [EM2750_BOARD_DLCW_130] = {
                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
                 .name          = "Huaqi DLCW-130",
                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-                .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
+                .tuner_type    = TUNER_ABSENT,
+                .is_webcam     = 1,
                 .input         = { {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = 0,
@@ -440,7 +456,8 @@ struct em28xx_board em28xx_boards[] = {
         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
                 .name         = "Videology 20K14XUSB USB2.0",
                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
-                .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
+                .tuner_type   = TUNER_ABSENT,
+                .is_webcam    = 1,
                 .input        = { {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = 0,
@@ -450,8 +467,7 @@ struct em28xx_board em28xx_boards[] = {
         [EM2820_BOARD_SILVERCREST_WEBCAM] = {
                 .name         = "Silvercrest Webcam 1.3mpix",
                 .tuner_type   = TUNER_ABSENT,
-                .is_27xx      = 1,
-                .decoder      = EM28XX_MT9V011,
+                .is_webcam    = 1,
                 .input        = { {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = 0,
@@ -500,7 +516,8 @@ struct em28xx_board em28xx_boards[] = {
                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
                 .name         = "NetGMBH Cam",
                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
-                .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
+                .tuner_type   = TUNER_ABSENT,
+                .is_webcam    = 1,
                 .input        = { {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = 0,
@@ -1250,25 +1267,26 @@ struct em28xx_board em28xx_boards[] = {
         },
         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
                 .name         = "Pinnacle Hybrid Pro",
-                .valid        = EM28XX_BOARD_NOT_VALIDATED,
                 .tuner_type   = TUNER_XC2028,
                 .tuner_gpio   = default_tuner_gpio,
                 .decoder      = EM28XX_TVP5150,
+                .has_dvb      = 1,
+                .dvb_gpio     = pinnacle_hybrid_pro_digital,
                 .input        = { {
                         .type     = EM28XX_VMUX_TELEVISION,
                         .vmux     = TVP5150_COMPOSITE0,
                         .amux     = EM28XX_AMUX_VIDEO,
-                        .gpio     = default_analog,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 }, {
                         .type     = EM28XX_VMUX_COMPOSITE1,
                         .vmux     = TVP5150_COMPOSITE1,
                         .amux     = EM28XX_AMUX_LINE_IN,
-                        .gpio     = default_analog,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 }, {
                         .type     = EM28XX_VMUX_SVIDEO,
                         .vmux     = TVP5150_SVIDEO,
                         .amux     = EM28XX_AMUX_LINE_IN,
-                        .gpio     = default_analog,
+                        .gpio     = pinnacle_hybrid_pro_analog,
                 } },
         },
         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1638,6 +1656,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
         {0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
         {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+        {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1704,6 +1723,32 @@ static inline void em28xx_set_model(struct em28xx *dev)
                                        EM28XX_I2C_FREQ_100_KHZ;
 }
 
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+        int i;
+        unsigned char regs[][3] = {
+                { 0x0d, 0x00, 0x01, },
+                { 0x0d, 0x00, 0x00, },
+                { 0x04, 0x05, 0x00, },  /* hres = 1280 */
+                { 0x03, 0x04, 0x00, },  /* vres = 1024 */
+                { 0x20, 0x11, 0x00, },
+                { 0x06, 0x00, 0x10, },
+                { 0x2b, 0x00, 0x24, },
+                { 0x2e, 0x00, 0x24, },
+                { 0x35, 0x00, 0x24, },
+                { 0x2d, 0x00, 0x20, },
+                { 0x2c, 0x00, 0x20, },
+                { 0x09, 0x0a, 0xd4, },
+                { 0x35, 0x00, 0x57, },
+        };
+
+        for (i = 0; i < ARRAY_SIZE(regs); i++)
+                i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+        return 0;
+}
+
 /* HINT method: webcam I2C chips
  *
  * This method work for webcams with Micron sensors
@@ -1716,9 +1761,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
         __be16 version_be;
         u16 version;
 
-        if (dev->model != EM2820_BOARD_UNKNOWN)
-                return 0;
-
         dev->i2c_client.addr = 0xba >> 1;
         cmd = 0;
         i2c_master_send(&dev->i2c_client, &cmd, 1);
@@ -1729,16 +1771,38 @@ static int em28xx_hint_sensor(struct em28xx *dev)
         version = be16_to_cpu(version_be);
 
         switch (version) {
-        case MT9V011_VERSION:
+        case 0x8243:            /* mt9v011 640x480 1.3 Mpix sensor */
                 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
                 sensor_name = "mt9v011";
+                dev->em28xx_sensor = EM28XX_MT9V011;
+                dev->sensor_xres = 640;
+                dev->sensor_yres = 480;
+                dev->sensor_xtal = 6300000;
+
+                /* probably means GRGB 16 bit bayer */
+                dev->vinmode = 0x0d;
+                dev->vinctl = 0x00;
+
+                break;
+        case 0x8431:
+                dev->model = EM2750_BOARD_UNKNOWN;
+                sensor_name = "mt9m001";
+                dev->em28xx_sensor = EM28XX_MT9M001;
+                em28xx_initialize_mt9m001(dev);
+                dev->sensor_xres = 1280;
+                dev->sensor_yres = 1024;
+
+                /* probably means BGGR 16 bit bayer */
+                dev->vinmode = 0x0c;
+                dev->vinctl = 0x00;
+
                 break;
         default:
-                printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+                printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
                 return -EINVAL;
         }
 
-        em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+        em28xx_errdev("Sensor is %s, using model %s entry.\n",
                       sensor_name, em28xx_boards[dev->model].name);
 
         return 0;
@@ -1772,10 +1836,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                         em28xx_info("chip ID is em2750\n");
                         break;
                 case CHIP_ID_EM2820:
-                        if (dev->board.is_27xx)
-                                em28xx_info("chip is em2710\n");
-                        else
-                                em28xx_info("chip ID is em2820\n");
+                        em28xx_info("chip ID is em2710 or em2820\n");
                         break;
                 case CHIP_ID_EM2840:
                         em28xx_info("chip ID is em2840\n");
@@ -1929,6 +1990,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
                 ctl->demod = XC3028_FE_ZARLINK456;
                 break;
         case EM2880_BOARD_TERRATEC_HYBRID_XS:
+        case EM2881_BOARD_PINNACLE_HYBRID_PRO:
                 ctl->demod = XC3028_FE_ZARLINK456;
                 break;
         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
@@ -2225,6 +2287,7 @@ void em28xx_card_setup(struct em28xx *dev)
                    em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
                    so make the call now so the analog GPIOs are set properly
                    before probing the i2c bus. */
+                em28xx_gpio_set(dev, dev->board.tuner_gpio);
                 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
                 break;
         case EM2820_BOARD_SILVERCREST_WEBCAM:
@@ -2262,9 +2325,14 @@ void em28xx_card_setup(struct em28xx *dev)
                 v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
                         "tvp5150", "tvp5150", tvp5150_addrs);
 
-        if (dev->board.decoder == EM28XX_MT9V011)
-                v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-                        "mt9v011", "mt9v011", mt9v011_addrs);
+        if (dev->em28xx_sensor == EM28XX_MT9V011) {
+                struct v4l2_subdev *sd;
+
+                sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+                         &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+                v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+        }
+
 
         if (dev->board.adecoder == EM28XX_TVAUDIO)
                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
@@ -2410,7 +2478,19 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
                 return errCode;
         }
 
-        em28xx_hint_sensor(dev);
+        /*
+         * Default format, used for tvp5150 or saa711x output formats
+         */
+        dev->vinmode = 0x10;
+        dev->vinctl  = 0x11;
+
+        /*
+         * If the device can be a webcam, seek for a sensor.
+         * If sensor is not found, then it isn't a webcam.
+         */
+        if (dev->board.is_webcam)
+                if (em28xx_hint_sensor(dev) < 0)
+                        dev->board.is_webcam = 0;
 
         /* Do board specific init and eeprom reading */
         em28xx_card_setup(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 079ab4d563a6..5b78e199abd1 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,28 +648,17 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 int em28xx_set_outfmt(struct em28xx *dev)
 {
         int ret;
-        int vinmode, vinctl, outfmt;
-
-        outfmt  = dev->format->reg;
-
-        if (dev->board.is_27xx) {
-                vinmode = 0x0d;
-                vinctl  = 0x00;
-        } else {
-                vinmode = 0x10;
-                vinctl  = 0x11;
-        }
 
         ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
-                                outfmt | 0x20, 0xff);
+                                dev->format->reg | 0x20, 0xff);
         if (ret < 0)
                         return ret;
 
-        ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
+        ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
         if (ret < 0)
                 return ret;
 
-        return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
+        return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -707,10 +696,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
         u8 mode;
         /* the em2800 scaler only supports scaling down to 50% */
 
-        if (dev->board.is_27xx) {
-                /* FIXME: Don't use the scaler yet */
-                mode = 0;
-        } else if (dev->board.is_em2800) {
+        if (dev->board.is_em2800) {
                 mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
         } else {
                 u8 buf[2];
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3da97c32b8fa..cf0ac7f2a30d 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -31,6 +31,8 @@
 #include "lgdt330x.h"
 #include "zl10353.h"
 #include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -243,7 +245,7 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
         .mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
-static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
         .demod_address = (0x1e >> 1),
         .no_tuner = 1,
         .disable_i2c_gate_ctrl = 1,
@@ -258,6 +260,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
 };
 #endif
 
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+        /* Values extracted from a USB trace of the Terratec Windows driver */
+        static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x2c };
+        static u8 reset[]          = { RESET,      0x80 };
+        static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+        static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0xa0 };
+        static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+        static u8 rs_err_cfg[]     = { RS_ERR_PER_1, 0x00, 0x4d };
+        static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+        static u8 trl_nom_cfg[]    = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+        static u8 tps_given_cfg[]  = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+        static u8 tuner_go[]       = { TUNER_GO, 0x01};
+
+        mt352_write(fe, clock_config,   sizeof(clock_config));
+        udelay(200);
+        mt352_write(fe, reset,          sizeof(reset));
+        mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+        mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+        mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+        mt352_write(fe, rs_err_cfg,     sizeof(rs_err_cfg));
+        mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+        mt352_write(fe, trl_nom_cfg,    sizeof(trl_nom_cfg));
+        mt352_write(fe, tps_given_cfg,  sizeof(tps_given_cfg));
+        mt352_write(fe, tuner_go,       sizeof(tuner_go));
+        return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+        .demod_address = (0x1e >> 1),
+        .no_tuner = 1,
+        .if2 = 45600,
+        .demod_init = mt352_terratec_xs_init,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -440,7 +477,6 @@ static int dvb_init(struct em28xx *dev)
                         goto out_free;
                 }
                 break;
-        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
         case EM2880_BOARD_KWORLD_DVB_310U:
         case EM2880_BOARD_EMPIRE_DUAL_TV:
                 dvb->frontend = dvb_attach(zl10353_attach,
@@ -451,20 +487,28 @@ static int dvb_init(struct em28xx *dev)
                         goto out_free;
                 }
                 break;
+        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+                dvb->frontend = dvb_attach(zl10353_attach,
+                                           &em28xx_zl10353_xc3028_no_i2c_gate,
+                                           &dev->i2c_adap);
+                if (attach_xc3028(0x61, dev) < 0) {
+                        result = -EINVAL;
+                        goto out_free;
+                }
+                break;
         case EM2880_BOARD_TERRATEC_HYBRID_XS:
+        case EM2881_BOARD_PINNACLE_HYBRID_PRO:
                 dvb->frontend = dvb_attach(zl10353_attach,
-                                           &em28xx_terratec_xs_zl10353_xc3028,
+                                           &em28xx_zl10353_xc3028_no_i2c_gate,
                                            &dev->i2c_adap);
                 if (dvb->frontend == NULL) {
                         /* This board could have either a zl10353 or a mt352.
                            If the chip id isn't for zl10353, try mt352 */
-
-                        /* FIXME: make support for mt352 work */
-                        printk(KERN_ERR "version of this board with mt352 not "
-                               "currently supported\n");
-                        result = -EINVAL;
-                        goto out_free;
+                        dvb->frontend = dvb_attach(mt352_attach,
+                                                   &terratec_xs_mt352_cfg,
+                                                   &dev->i2c_adap);
                 }
+
                 if (attach_xc3028(0x61, dev) < 0) {
                         result = -EINVAL;
                         goto out_free;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 14316c912179..ff37b4c15f44 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -657,8 +657,8 @@ static void get_scale(struct em28xx *dev,
                         unsigned int width, unsigned int height,
                         unsigned int *hscale, unsigned int *vscale)
 {
-        unsigned int          maxw   = norm_maxw(dev);
-        unsigned int          maxh   = norm_maxh(dev);
+        unsigned int          maxw = norm_maxw(dev);
+        unsigned int          maxh = norm_maxh(dev);
 
         *hscale = (((unsigned long)maxw) << 12) / width - 4096L;
         if (*hscale >= 0x4000)
@@ -726,11 +726,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
                 return -EINVAL;
         }
 
-        if (dev->board.is_27xx) {
-                /* FIXME: This is the only supported fmt */
-                width  = 640;
-                height = 480;
-        } else if (dev->board.is_em2800) {
+        if (dev->board.is_em2800) {
                 /* the em2800 can only scale down to 50% */
                 height = height > (3 * maxh / 4) ? maxh : maxh / 2;
                 width = width > (3 * maxw / 4) ? maxw : maxw / 2;
@@ -767,12 +763,6 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
 {
         struct em28xx_fmt     *fmt;
 
-        /* FIXME: This is the only supported fmt */
-        if (dev->board.is_27xx) {
-                width  = 640;
-                height = 480;
-        }
-
         fmt = format_by_fourcc(fourcc);
         if (!fmt)
                 return -EINVAL;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index d90fef463764..45bd513f62dc 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -358,10 +358,15 @@ struct em28xx_input {
 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
 
 enum em28xx_decoder {
-        EM28XX_NODECODER,
+        EM28XX_NODECODER = 0,
         EM28XX_TVP5150,
         EM28XX_SAA711X,
+};
+
+enum em28xx_sensor {
+        EM28XX_NOSENSOR = 0,
         EM28XX_MT9V011,
+        EM28XX_MT9M001,
 };
 
 enum em28xx_adecoder {
@@ -390,7 +395,7 @@ struct em28xx_board {
         unsigned int max_range_640_480:1;
         unsigned int has_dvb:1;
         unsigned int has_snapshot_button:1;
-        unsigned int is_27xx:1;
+        unsigned int is_webcam:1;
         unsigned int valid:1;
 
         unsigned char xclk, i2c_speed;
@@ -474,6 +479,14 @@ struct em28xx {
         struct v4l2_device v4l2_dev;
         struct em28xx_board board;
 
+        /* Webcam specific fields */
+        enum em28xx_sensor em28xx_sensor;
+        int sensor_xres, sensor_yres;
+        int sensor_xtal;
+
+        /* Vinmode/Vinctl used at the driver */
+        int vinmode, vinctl;
+
         unsigned int stream_on:1;       /* Locks streams */
         unsigned int has_audio_class:1;
         unsigned int has_alsa_audio:1;
@@ -754,17 +767,23 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
 /*FIXME: maxw should be dependent of alt mode */
 static inline unsigned int norm_maxw(struct em28xx *dev)
 {
+        if (dev->board.is_webcam)
+                return dev->sensor_xres;
+
         if (dev->board.max_range_640_480)
                 return 640;
-        else
-                return 720;
+
+        return 720;
 }
 
 static inline unsigned int norm_maxh(struct em28xx *dev)
 {
+        if (dev->board.is_webcam)
+                return dev->sensor_yres;
+
         if (dev->board.max_range_640_480)
                 return 480;
-        else
-                return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
+
+        return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
 }
 #endif
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 578dc4ffc965..34f46f2bc040 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -102,6 +102,22 @@ config USB_GSPCA_PAC7311
           To compile this driver as a module, choose M here: the
           module will be called gspca_pac7311.
 
+config USB_GSPCA_SN9C20X
+       tristate "SN9C20X USB Camera Driver"
+       depends on VIDEO_V4L2 && USB_GSPCA
+       help
+         Say Y here if you want support for cameras based on the
+         sn9c20x chips (SN9C201 and SN9C202).
+
+         To compile this driver as a module, choose M here: the
+         module will be called gspca_sn9c20x.
+
+config USB_GSPCA_SN9C20X_EVDEV
+       bool "Enable evdev support"
+       depends on USB_GSPCA_SN9C20X
+       ---help---
+         Say Y here in order to enable evdev support for sn9c20x webcam button.
+
 config USB_GSPCA_SONIXB
         tristate "SONIX Bayer USB Camera Driver"
         depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 8a6643e8eb96..f6d3b86e9ad5 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_OV519)    += gspca_ov519.o
 obj-$(CONFIG_USB_GSPCA_OV534)    += gspca_ov534.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
 obj-$(CONFIG_USB_GSPCA_SONIXJ)   += gspca_sonixj.o
 obj-$(CONFIG_USB_GSPCA_SPCA500)  += gspca_spca500.o
@@ -35,6 +36,7 @@ gspca_ov519-objs    := ov519.o
 gspca_ov534-objs    := ov534.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7311-objs  := pac7311.o
+gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
 gspca_sonixj-objs   := sonixj.o
 gspca_spca500-objs  := spca500.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 219cfa6fb877..8d48ea1742c2 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,6 +846,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x22);          /* JPEG 411 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 1e89600986c8..b8561dfb6c8c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -727,6 +727,74 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev,
         return -EINVAL;
 }
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+                        struct v4l2_dbg_register *reg)
+{
+        int ret;
+        struct gspca_dev *gspca_dev = priv;
+
+        if (!gspca_dev->sd_desc->get_chip_ident)
+                return -EINVAL;
+
+        if (!gspca_dev->sd_desc->get_register)
+                return -EINVAL;
+
+        if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+                return -ERESTARTSYS;
+        if (gspca_dev->present)
+                ret = gspca_dev->sd_desc->get_register(gspca_dev, reg);
+        else
+                ret = -ENODEV;
+        mutex_unlock(&gspca_dev->usb_lock);
+
+        return ret;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+                        struct v4l2_dbg_register *reg)
+{
+        int ret;
+        struct gspca_dev *gspca_dev = priv;
+
+        if (!gspca_dev->sd_desc->get_chip_ident)
+                return -EINVAL;
+
+        if (!gspca_dev->sd_desc->set_register)
+                return -EINVAL;
+
+        if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+                return -ERESTARTSYS;
+        if (gspca_dev->present)
+                ret = gspca_dev->sd_desc->set_register(gspca_dev, reg);
+        else
+                ret = -ENODEV;
+        mutex_unlock(&gspca_dev->usb_lock);
+
+        return ret;
+}
+#endif
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+                        struct v4l2_dbg_chip_ident *chip)
+{
+        int ret;
+        struct gspca_dev *gspca_dev = priv;
+
+        if (!gspca_dev->sd_desc->get_chip_ident)
+                return -EINVAL;
+
+        if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+                return -ERESTARTSYS;
+        if (gspca_dev->present)
+                ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+        else
+                ret = -ENODEV;
+        mutex_unlock(&gspca_dev->usb_lock);
+
+        return ret;
+}
+
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
                                 struct v4l2_fmtdesc *fmtdesc)
 {
@@ -1883,6 +1951,11 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
         .vidioc_s_parm          = vidioc_s_parm,
         .vidioc_s_std           = vidioc_s_std,
         .vidioc_enum_framesizes = vidioc_enum_framesizes,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        .vidioc_g_register      = vidioc_g_register,
+        .vidioc_s_register      = vidioc_s_register,
+#endif
+        .vidioc_g_chip_ident    = vidioc_g_chip_ident,
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
         .vidiocgmbuf          = vidiocgmbuf,
 #endif
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index bd1faff88644..46c4effdfcd5 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -69,6 +69,10 @@ typedef void (*cam_v_op) (struct gspca_dev *);
 typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
 typedef int (*cam_jpg_op) (struct gspca_dev *,
                                 struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+                                struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+                                struct v4l2_dbg_chip_ident *);
 typedef int (*cam_streamparm_op) (struct gspca_dev *,
                                   struct v4l2_streamparm *);
 typedef int (*cam_qmnu_op) (struct gspca_dev *,
@@ -105,6 +109,11 @@ struct sd_desc {
         cam_qmnu_op querymenu;
         cam_streamparm_op get_streamparm;
         cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        cam_reg_op set_register;
+        cam_reg_op get_register;
+#endif
+        cam_ident_op get_chip_ident;
 };
 
 /* packet types when moving from iso buf to frame buf */
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 191bcd718979..0163903d1c0f 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -476,9 +476,6 @@ static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
         err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
         if (err < 0)
                 return err;
-        err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-        if (err < 0)
-                return err;
 
         err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
         if (err < 0)
@@ -524,9 +521,6 @@ static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
         err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
         if (err < 0)
                 return err;
-        err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-        if (err < 0)
-                return err;
 
         err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
         if (err < 0)
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 75e8d14e4ac7..de769caf013d 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -201,6 +201,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x21);          /* JPEG 422 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
new file mode 100644
index 000000000000..fcfbbd329b4c
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -0,0 +1,2434 @@
+/*
+ *      Sonix sn9c201 sn9c202 library
+ *      Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com>
+ *      Copyright (C) 2009 Brian Johnson <brijohn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/usb/input.h>
+#include <linux/input.h>
+#endif
+
+#include "gspca.h"
+#include "jpeg.h"
+
+#include <media/v4l2-chip-ident.h>
+
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
+                "microdia project <microdia@googlegroups.com>");
+MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "sn9c20x"
+
+#define MODE_RAW        0x10
+#define MODE_JPEG       0x20
+#define MODE_SXGA       0x80
+
+#define SENSOR_OV9650   0
+#define SENSOR_OV9655   1
+#define SENSOR_SOI968   2
+#define SENSOR_OV7660   3
+#define SENSOR_OV7670   4
+#define SENSOR_MT9V011  5
+#define SENSOR_MT9V111  6
+#define SENSOR_MT9V112  7
+#define SENSOR_MT9M001  8
+#define SENSOR_MT9M111  9
+#define SENSOR_HV7131R  10
+#define SENSOR_MT9VPRB  20
+
+/* specific webcam descriptor */
+struct sd {
+        struct gspca_dev gspca_dev;
+
+#define MIN_AVG_LUM 80
+#define MAX_AVG_LUM 130
+        atomic_t avg_lum;
+        u8 old_step;
+        u8 older_step;
+        u8 exposure_step;
+
+        u8 brightness;
+        u8 contrast;
+        u8 saturation;
+        s16 hue;
+        u8 gamma;
+        u8 red;
+        u8 blue;
+
+        u8 hflip;
+        u8 vflip;
+        u8 gain;
+        u16 exposure;
+        u8 auto_exposure;
+
+        u8 i2c_addr;
+        u8 sensor;
+        u8 hstart;
+        u8 vstart;
+
+        u8 *jpeg_hdr;
+        u8 quality;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+        struct input_dev *input_dev;
+        u8 input_gpio;
+        struct task_struct *input_task;
+#endif
+};
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+        {
+#define BRIGHTNESS_IDX 0
+            {
+                .id      = V4L2_CID_BRIGHTNESS,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Brightness",
+                .minimum = 0,
+                .maximum = 0xff,
+                .step    = 1,
+#define BRIGHTNESS_DEFAULT 0x7f
+                .default_value = BRIGHTNESS_DEFAULT,
+            },
+            .set = sd_setbrightness,
+            .get = sd_getbrightness,
+        },
+        {
+#define CONTRAST_IDX 1
+            {
+                .id      = V4L2_CID_CONTRAST,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Contrast",
+                .minimum = 0,
+                .maximum = 0xff,
+                .step    = 1,
+#define CONTRAST_DEFAULT 0x7f
+                .default_value = CONTRAST_DEFAULT,
+            },
+            .set = sd_setcontrast,
+            .get = sd_getcontrast,
+        },
+        {
+#define SATURATION_IDX 2
+            {
+                .id      = V4L2_CID_SATURATION,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Saturation",
+                .minimum = 0,
+                .maximum = 0xff,
+                .step    = 1,
+#define SATURATION_DEFAULT 0x7f
+                .default_value = SATURATION_DEFAULT,
+            },
+            .set = sd_setsaturation,
+            .get = sd_getsaturation,
+        },
+        {
+#define HUE_IDX 3
+            {
+                .id      = V4L2_CID_HUE,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Hue",
+                .minimum = -180,
+                .maximum = 180,
+                .step    = 1,
+#define HUE_DEFAULT 0
+                .default_value = HUE_DEFAULT,
+            },
+            .set = sd_sethue,
+            .get = sd_gethue,
+        },
+        {
+#define GAMMA_IDX 4
+            {
+                .id      = V4L2_CID_GAMMA,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Gamma",
+                .minimum = 0,
+                .maximum = 0xff,
+                .step    = 1,
+#define GAMMA_DEFAULT 0x10
+                .default_value = GAMMA_DEFAULT,
+            },
+            .set = sd_setgamma,
+            .get = sd_getgamma,
+        },
+        {
+#define BLUE_IDX 5
+            {
+                .id      = V4L2_CID_BLUE_BALANCE,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Blue Balance",
+                .minimum = 0,
+                .maximum = 0x7f,
+                .step    = 1,
+#define BLUE_DEFAULT 0x28
+                .default_value = BLUE_DEFAULT,
+            },
+            .set = sd_setbluebalance,
+            .get = sd_getbluebalance,
+        },
+        {
+#define RED_IDX 6
+            {
+                .id      = V4L2_CID_RED_BALANCE,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Red Balance",
+                .minimum = 0,
+                .maximum = 0x7f,
+                .step    = 1,
+#define RED_DEFAULT 0x28
+                .default_value = RED_DEFAULT,
+            },
+            .set = sd_setredbalance,
+            .get = sd_getredbalance,
+        },
+        {
+#define HFLIP_IDX 7
+            {
+                .id      = V4L2_CID_HFLIP,
+                .type    = V4L2_CTRL_TYPE_BOOLEAN,
+                .name    = "Horizontal Flip",
+                .minimum = 0,
+                .maximum = 1,
+                .step    = 1,
+#define HFLIP_DEFAULT 0
+                .default_value = HFLIP_DEFAULT,
+            },
+            .set = sd_sethflip,
+            .get = sd_gethflip,
+        },
+        {
+#define VFLIP_IDX 8
+            {
+                .id      = V4L2_CID_VFLIP,
+                .type    = V4L2_CTRL_TYPE_BOOLEAN,
+                .name    = "Vertical Flip",
+                .minimum = 0,
+                .maximum = 1,
+                .step    = 1,
+#define VFLIP_DEFAULT 0
+                .default_value = VFLIP_DEFAULT,
+            },
+            .set = sd_setvflip,
+            .get = sd_getvflip,
+        },
+        {
+#define EXPOSURE_IDX 9
+            {
+                .id      = V4L2_CID_EXPOSURE,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Exposure",
+                .minimum = 0,
+                .maximum = 0x1780,
+                .step    = 1,
+#define EXPOSURE_DEFAULT 0x33
+                .default_value = EXPOSURE_DEFAULT,
+            },
+            .set = sd_setexposure,
+            .get = sd_getexposure,
+        },
+        {
+#define GAIN_IDX 10
+            {
+                .id      = V4L2_CID_GAIN,
+                .type    = V4L2_CTRL_TYPE_INTEGER,
+                .name    = "Gain",
+                .minimum = 0,
+                .maximum = 28,
+                .step    = 1,
+#define GAIN_DEFAULT 0x00
+                .default_value = GAIN_DEFAULT,
+            },
+            .set = sd_setgain,
+            .get = sd_getgain,
+        },
+        {
+#define AUTOGAIN_IDX 11
+            {
+                .id      = V4L2_CID_AUTOGAIN,
+                .type    = V4L2_CTRL_TYPE_BOOLEAN,
+                .name    = "Auto Exposure",
+                .minimum = 0,
+                .maximum = 1,
+                .step    = 1,
+#define AUTO_EXPOSURE_DEFAULT 1
+                .default_value = AUTO_EXPOSURE_DEFAULT,
+            },
+            .set = sd_setautoexposure,
+            .get = sd_getautoexposure,
+        },
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+        {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 240,
+                .sizeimage = 240 * 120,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 0 | MODE_JPEG},
+        {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 160,
+                .sizeimage = 160 * 120,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 0 | MODE_RAW},
+        {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 240,
+                .sizeimage = 240 * 120,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 0},
+        {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 480,
+                .sizeimage = 480 * 240 ,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 1 | MODE_JPEG},
+        {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 320,
+                .sizeimage = 320 * 240 ,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 1 | MODE_RAW},
+        {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 480,
+                .sizeimage = 480 * 240 ,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 1},
+        {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 960,
+                .sizeimage = 960 * 480,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 2 | MODE_JPEG},
+        {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 640,
+                .sizeimage = 640 * 480,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 2 | MODE_RAW},
+        {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 960,
+                .sizeimage = 960 * 480,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 2},
+};
+
+static const struct v4l2_pix_format sxga_mode[] = {
+        {160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 240,
+                .sizeimage = 240 * 120,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 0 | MODE_JPEG},
+        {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 160,
+                .sizeimage = 160 * 120,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 0 | MODE_RAW},
+        {160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 240,
+                .sizeimage = 240 * 120,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 0},
+        {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 480,
+                .sizeimage = 480 * 240 ,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 1 | MODE_JPEG},
+        {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 320,
+                .sizeimage = 320 * 240 ,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 1 | MODE_RAW},
+        {320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 480,
+                .sizeimage = 480 * 240 ,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 1},
+        {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+                .bytesperline = 960,
+                .sizeimage = 960 * 480,
+                .colorspace = V4L2_COLORSPACE_JPEG,
+                .priv = 2 | MODE_JPEG},
+        {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 640,
+                .sizeimage = 640 * 480,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 2 | MODE_RAW},
+        {640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+                .bytesperline = 960,
+                .sizeimage = 960 * 480,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 2},
+        {1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+                .bytesperline = 1280,
+                .sizeimage = (1280 * 1024) + 64,
+                .colorspace = V4L2_COLORSPACE_SRGB,
+                .priv = 3 | MODE_RAW | MODE_SXGA},
+};
+
+static const int hsv_red_x[] = {
+        41,  44,  46,  48,  50,  52,  54,  56,
+        58,  60,  62,  64,  66,  68,  70,  72,
+        74,  76,  78,  80,  81,  83,  85,  87,
+        88,  90,  92,  93,  95,  97,  98, 100,
+        101, 102, 104, 105, 107, 108, 109, 110,
+        112, 113, 114, 115, 116, 117, 118, 119,
+        120, 121, 122, 123, 123, 124, 125, 125,
+        126, 127, 127, 128, 128, 129, 129, 129,
+        130, 130, 130, 130, 131, 131, 131, 131,
+        131, 131, 131, 131, 130, 130, 130, 130,
+        129, 129, 129, 128, 128, 127, 127, 126,
+        125, 125, 124, 123, 122, 122, 121, 120,
+        119, 118, 117, 116, 115, 114, 112, 111,
+        110, 109, 107, 106, 105, 103, 102, 101,
+        99,  98,  96,  94,  93,  91,  90,  88,
+        86,  84,  83,  81,  79,  77,  75,  74,
+        72,  70,  68,  66,  64,  62,  60,  58,
+        56,  54,  52,  49,  47,  45,  43,  41,
+        39,  36,  34,  32,  30,  28,  25,  23,
+        21,  19,  16,  14,  12,   9,   7,   5,
+        3,   0,  -1,  -3,  -6,  -8, -10, -12,
+        -15, -17, -19, -22, -24, -26, -28, -30,
+        -33, -35, -37, -39, -41, -44, -46, -48,
+        -50, -52, -54, -56, -58, -60, -62, -64,
+        -66, -68, -70, -72, -74, -76, -78, -80,
+        -81, -83, -85, -87, -88, -90, -92, -93,
+        -95, -97, -98, -100, -101, -102, -104, -105,
+        -107, -108, -109, -110, -112, -113, -114, -115,
+        -116, -117, -118, -119, -120, -121, -122, -123,
+        -123, -124, -125, -125, -126, -127, -127, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -128, -127, -127, -126, -125, -125, -124, -123,
+        -122, -122, -121, -120, -119, -118, -117, -116,
+        -115, -114, -112, -111, -110, -109, -107, -106,
+        -105, -103, -102, -101, -99, -98, -96, -94,
+        -93, -91, -90, -88, -86, -84, -83, -81,
+        -79, -77, -75, -74, -72, -70, -68, -66,
+        -64, -62, -60, -58, -56, -54, -52, -49,
+        -47, -45, -43, -41, -39, -36, -34, -32,
+        -30, -28, -25, -23, -21, -19, -16, -14,
+        -12,  -9,  -7,  -5,  -3,   0,   1,   3,
+        6,   8,  10,  12,  15,  17,  19,  22,
+        24,  26,  28,  30,  33,  35,  37,  39, 41
+};
+
+static const int hsv_red_y[] = {
+        82,  80,  78,  76,  74,  73,  71,  69,
+        67,  65,  63,  61,  58,  56,  54,  52,
+        50,  48,  46,  44,  41,  39,  37,  35,
+        32,  30,  28,  26,  23,  21,  19,  16,
+        14,  12,  10,   7,   5,   3,   0,  -1,
+        -3,  -6,  -8, -10, -13, -15, -17, -19,
+        -22, -24, -26, -29, -31, -33, -35, -38,
+        -40, -42, -44, -46, -48, -51, -53, -55,
+        -57, -59, -61, -63, -65, -67, -69, -71,
+        -73, -75, -77, -79, -81, -82, -84, -86,
+        -88, -89, -91, -93, -94, -96, -98, -99,
+        -101, -102, -104, -105, -106, -108, -109, -110,
+        -112, -113, -114, -115, -116, -117, -119, -120,
+        -120, -121, -122, -123, -124, -125, -126, -126,
+        -127, -128, -128, -128, -128, -128, -128, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -128, -128, -128, -128, -128, -128, -128, -128,
+        -127, -127, -126, -125, -125, -124, -123, -122,
+        -121, -120, -119, -118, -117, -116, -115, -114,
+        -113, -111, -110, -109, -107, -106, -105, -103,
+        -102, -100, -99, -97, -96, -94, -92, -91,
+        -89, -87, -85, -84, -82, -80, -78, -76,
+        -74, -73, -71, -69, -67, -65, -63, -61,
+        -58, -56, -54, -52, -50, -48, -46, -44,
+        -41, -39, -37, -35, -32, -30, -28, -26,
+        -23, -21, -19, -16, -14, -12, -10,  -7,
+        -5,  -3,   0,   1,   3,   6,   8,  10,
+        13,  15,  17,  19,  22,  24,  26,  29,
+        31,  33,  35,  38,  40,  42,  44,  46,
+        48,  51,  53,  55,  57,  59,  61,  63,
+        65,  67,  69,  71,  73,  75,  77,  79,
+        81,  82,  84,  86,  88,  89,  91,  93,
+        94,  96,  98,  99, 101, 102, 104, 105,
+        106, 108, 109, 110, 112, 113, 114, 115,
+        116, 117, 119, 120, 120, 121, 122, 123,
+        124, 125, 126, 126, 127, 128, 128, 129,
+        129, 130, 130, 131, 131, 131, 131, 132,
+        132, 132, 132, 132, 132, 132, 132, 132,
+        132, 132, 132, 131, 131, 131, 130, 130,
+        130, 129, 129, 128, 127, 127, 126, 125,
+        125, 124, 123, 122, 121, 120, 119, 118,
+        117, 116, 115, 114, 113, 111, 110, 109,
+        107, 106, 105, 103, 102, 100,  99,  97,
+        96, 94, 92, 91, 89, 87, 85, 84, 82
+};
+
+static const int hsv_green_x[] = {
+        -124, -124, -125, -125, -125, -125, -125, -125,
+        -125, -126, -126, -125, -125, -125, -125, -125,
+        -125, -124, -124, -124, -123, -123, -122, -122,
+        -121, -121, -120, -120, -119, -118, -117, -117,
+        -116, -115, -114, -113, -112, -111, -110, -109,
+        -108, -107, -105, -104, -103, -102, -100, -99,
+        -98, -96, -95, -93, -92, -91, -89, -87,
+        -86, -84, -83, -81, -79, -77, -76, -74,
+        -72, -70, -69, -67, -65, -63, -61, -59,
+        -57, -55, -53, -51, -49, -47, -45, -43,
+        -41, -39, -37, -35, -33, -30, -28, -26,
+        -24, -22, -20, -18, -15, -13, -11,  -9,
+        -7,  -4,  -2,   0,   1,   3,   6,   8,
+        10,  12,  14,  17,  19,  21,  23,  25,
+        27,  29,  32,  34,  36,  38,  40,  42,
+        44,  46,  48,  50,  52,  54,  56,  58,
+        60,  62,  64,  66,  68,  70,  71,  73,
+        75,  77,  78,  80,  82,  83,  85,  87,
+        88,  90,  91,  93,  94,  96,  97,  98,
+        100, 101, 102, 104, 105, 106, 107, 108,
+        109, 111, 112, 113, 113, 114, 115, 116,
+        117, 118, 118, 119, 120, 120, 121, 122,
+        122, 123, 123, 124, 124, 124, 125, 125,
+        125, 125, 125, 125, 125, 126, 126, 125,
+        125, 125, 125, 125, 125, 124, 124, 124,
+        123, 123, 122, 122, 121, 121, 120, 120,
+        119, 118, 117, 117, 116, 115, 114, 113,
+        112, 111, 110, 109, 108, 107, 105, 104,
+        103, 102, 100,  99,  98,  96,  95,  93,
+        92,  91,  89,  87,  86,  84,  83,  81,
+        79,  77,  76,  74,  72,  70,  69,  67,
+        65,  63,  61,  59,  57,  55,  53,  51,
+        49,  47,  45,  43,  41,  39,  37,  35,
+        33,  30,  28,  26,  24,  22,  20,  18,
+        15,  13,  11,   9,   7,   4,   2,   0,
+        -1,  -3,  -6,  -8, -10, -12, -14, -17,
+        -19, -21, -23, -25, -27, -29, -32, -34,
+        -36, -38, -40, -42, -44, -46, -48, -50,
+        -52, -54, -56, -58, -60, -62, -64, -66,
+        -68, -70, -71, -73, -75, -77, -78, -80,
+        -82, -83, -85, -87, -88, -90, -91, -93,
+        -94, -96, -97, -98, -100, -101, -102, -104,
+        -105, -106, -107, -108, -109, -111, -112, -113,
+        -113, -114, -115, -116, -117, -118, -118, -119,
+        -120, -120, -121, -122, -122, -123, -123, -124, -124
+};
+
+static const int hsv_green_y[] = {
+        -100, -99, -98, -97, -95, -94, -93, -91,
+        -90, -89, -87, -86, -84, -83, -81, -80,
+        -78, -76, -75, -73, -71, -70, -68, -66,
+        -64, -63, -61, -59, -57, -55, -53, -51,
+        -49, -48, -46, -44, -42, -40, -38, -36,
+        -34, -32, -30, -27, -25, -23, -21, -19,
+        -17, -15, -13, -11,  -9,  -7,  -4,  -2,
+        0,   1,   3,   5,   7,   9,  11,  14,
+        16,  18,  20,  22,  24,  26,  28,  30,
+        32,  34,  36,  38,  40,  42,  44,  46,
+        48,  50,  52,  54,  56,  58,  59,  61,
+        63,  65,  67,  68,  70,  72,  74,  75,
+        77,  78,  80,  82,  83,  85,  86,  88,
+        89,  90,  92,  93,  95,  96,  97,  98,
+        100, 101, 102, 103, 104, 105, 106, 107,
+        108, 109, 110, 111, 112, 112, 113, 114,
+        115, 115, 116, 116, 117, 117, 118, 118,
+        119, 119, 119, 120, 120, 120, 120, 120,
+        121, 121, 121, 121, 121, 121, 120, 120,
+        120, 120, 120, 119, 119, 119, 118, 118,
+        117, 117, 116, 116, 115, 114, 114, 113,
+        112, 111, 111, 110, 109, 108, 107, 106,
+        105, 104, 103, 102, 100,  99,  98,  97,
+        95,  94,  93,  91,  90,  89,  87,  86,
+        84,  83,  81,  80,  78,  76,  75,  73,
+        71,  70,  68,  66,  64,  63,  61,  59,
+        57,  55,  53,  51,  49,  48,  46,  44,
+        42,  40,  38,  36,  34,  32,  30,  27,
+        25,  23,  21,  19,  17,  15,  13,  11,
+        9,   7,   4,   2,   0,  -1,  -3,  -5,
+        -7,  -9, -11, -14, -16, -18, -20, -22,
+        -24, -26, -28, -30, -32, -34, -36, -38,
+        -40, -42, -44, -46, -48, -50, -52, -54,
+        -56, -58, -59, -61, -63, -65, -67, -68,
+        -70, -72, -74, -75, -77, -78, -80, -82,
+        -83, -85, -86, -88, -89, -90, -92, -93,
+        -95, -96, -97, -98, -100, -101, -102, -103,
+        -104, -105, -106, -107, -108, -109, -110, -111,
+        -112, -112, -113, -114, -115, -115, -116, -116,
+        -117, -117, -118, -118, -119, -119, -119, -120,
+        -120, -120, -120, -120, -121, -121, -121, -121,
+        -121, -121, -120, -120, -120, -120, -120, -119,
+        -119, -119, -118, -118, -117, -117, -116, -116,
+        -115, -114, -114, -113, -112, -111, -111, -110,
+        -109, -108, -107, -106, -105, -104, -103, -102, -100
+};
+
+static const int hsv_blue_x[] = {
+        112, 113, 114, 114, 115, 116, 117, 117,
+        118, 118, 119, 119, 120, 120, 120, 121,
+        121, 121, 122, 122, 122, 122, 122, 122,
+        122, 122, 122, 122, 122, 122, 121, 121,
+        121, 120, 120, 120, 119, 119, 118, 118,
+        117, 116, 116, 115, 114, 113, 113, 112,
+        111, 110, 109, 108, 107, 106, 105, 104,
+        103, 102, 100,  99,  98,  97,  95,  94,
+        93,  91,  90,  88,  87,  85,  84,  82,
+        80,  79,  77,  76,  74,  72,  70,  69,
+        67,  65,  63,  61,  60,  58,  56,  54,
+        52,  50,  48,  46,  44,  42,  40,  38,
+        36,  34,  32,  30,  28,  26,  24,  22,
+        19,  17,  15,  13,  11,   9,   7,   5,
+        2,   0,  -1,  -3,  -5,  -7,  -9, -12,
+        -14, -16, -18, -20, -22, -24, -26, -28,
+        -31, -33, -35, -37, -39, -41, -43, -45,
+        -47, -49, -51, -53, -54, -56, -58, -60,
+        -62, -64, -66, -67, -69, -71, -73, -74,
+        -76, -78, -79, -81, -83, -84, -86, -87,
+        -89, -90, -92, -93, -94, -96, -97, -98,
+        -99, -101, -102, -103, -104, -105, -106, -107,
+        -108, -109, -110, -111, -112, -113, -114, -114,
+        -115, -116, -117, -117, -118, -118, -119, -119,
+        -120, -120, -120, -121, -121, -121, -122, -122,
+        -122, -122, -122, -122, -122, -122, -122, -122,
+        -122, -122, -121, -121, -121, -120, -120, -120,
+        -119, -119, -118, -118, -117, -116, -116, -115,
+        -114, -113, -113, -112, -111, -110, -109, -108,
+        -107, -106, -105, -104, -103, -102, -100, -99,
+        -98, -97, -95, -94, -93, -91, -90, -88,
+        -87, -85, -84, -82, -80, -79, -77, -76,
+        -74, -72, -70, -69, -67, -65, -63, -61,
+        -60, -58, -56, -54, -52, -50, -48, -46,
+        -44, -42, -40, -38, -36, -34, -32, -30,
+        -28, -26, -24, -22, -19, -17, -15, -13,
+        -11,  -9,  -7,  -5,  -2,   0,   1,   3,
+        5,   7,   9,  12,  14,  16,  18,  20,
+        22,  24,  26,  28,  31,  33,  35,  37,
+        39,  41,  43,  45,  47,  49,  51,  53,
+        54,  56,  58,  60,  62,  64,  66,  67,
+        69,  71,  73,  74,  76,  78,  79,  81,
+        83,  84,  86,  87,  89,  90,  92,  93,
+        94,  96,  97,  98,  99, 101, 102, 103,
+        104, 105, 106, 107, 108, 109, 110, 111, 112
+};
+
+static const int hsv_blue_y[] = {
+        -11, -13, -15, -17, -19, -21, -23, -25,
+        -27, -29, -31, -33, -35, -37, -39, -41,
+        -43, -45, -46, -48, -50, -52, -54, -55,
+        -57, -59, -61, -62, -64, -66, -67, -69,
+        -71, -72, -74, -75, -77, -78, -80, -81,
+        -83, -84, -86, -87, -88, -90, -91, -92,
+        -93, -95, -96, -97, -98, -99, -100, -101,
+        -102, -103, -104, -105, -106, -106, -107, -108,
+        -109, -109, -110, -111, -111, -112, -112, -113,
+        -113, -114, -114, -114, -115, -115, -115, -115,
+        -116, -116, -116, -116, -116, -116, -116, -116,
+        -116, -115, -115, -115, -115, -114, -114, -114,
+        -113, -113, -112, -112, -111, -111, -110, -110,
+        -109, -108, -108, -107, -106, -105, -104, -103,
+        -102, -101, -100, -99, -98, -97, -96, -95,
+        -94, -93, -91, -90, -89, -88, -86, -85,
+        -84, -82, -81, -79, -78, -76, -75, -73,
+        -71, -70, -68, -67, -65, -63, -62, -60,
+        -58, -56, -55, -53, -51, -49, -47, -45,
+        -44, -42, -40, -38, -36, -34, -32, -30,
+        -28, -26, -24, -22, -20, -18, -16, -14,
+        -12, -10,  -8,  -6,  -4,  -2,   0,   1,
+        3,   5,   7,   9,  11,  13,  15,  17,
+        19,  21,  23,  25,  27,  29,  31,  33,
+        35,  37,  39,  41,  43,  45,  46,  48,
+        50,  52,  54,  55,  57,  59,  61,  62,
+        64,  66,  67,  69,  71,  72,  74,  75,
+        77,  78,  80,  81,  83,  84,  86,  87,
+        88,  90,  91,  92,  93,  95,  96,  97,
+        98,  99, 100, 101, 102, 103, 104, 105,
+        106, 106, 107, 108, 109, 109, 110, 111,
+        111, 112, 112, 113, 113, 114, 114, 114,
+        115, 115, 115, 115, 116, 116, 116, 116,
+        116, 116, 116, 116, 116, 115, 115, 115,
+        115, 114, 114, 114, 113, 113, 112, 112,
+        111, 111, 110, 110, 109, 108, 108, 107,
+        106, 105, 104, 103, 102, 101, 100,  99,
+        98,  97,  96,  95,  94,  93,  91,  90,
+        89,  88,  86,  85,  84,  82,  81,  79,
+        78,  76,  75,  73,  71,  70,  68,  67,
+        65,  63,  62,  60,  58,  56,  55,  53,
+        51,  49,  47,  45,  44,  42,  40,  38,
+        36,  34,  32,  30,  28,  26,  24,  22,
+        20,  18,  16,  14,  12,  10,   8,   6,
+        4,   2,   0,  -1,  -3,  -5,  -7,  -9, -11
+};
+
+static u16 i2c_ident[] = {
+        V4L2_IDENT_OV9650,
+        V4L2_IDENT_OV9655,
+        V4L2_IDENT_SOI968,
+        V4L2_IDENT_OV7660,
+        V4L2_IDENT_OV7670,
+        V4L2_IDENT_MT9V011,
+        V4L2_IDENT_MT9V111,
+        V4L2_IDENT_MT9V112,
+        V4L2_IDENT_MT9M001C12ST,
+        V4L2_IDENT_MT9M111,
+        V4L2_IDENT_HV7131R,
+};
+
+static u16 bridge_init[][2] = {
+        {0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
+        {0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
+        {0x1068, 0x30}, {0x1069, 0x20}, {0x106a, 0x10},
+        {0x106b, 0x08}, {0x1188, 0x87}, {0x11a1, 0x00},
+        {0x11a2, 0x00}, {0x11a3, 0x6a}, {0x11a4, 0x50},
+        {0x11ab, 0x00}, {0x11ac, 0x00}, {0x11ad, 0x50},
+        {0x11ae, 0x3c}, {0x118a, 0x04}, {0x0395, 0x04},
+        {0x11b8, 0x3a}, {0x118b, 0x0e}, {0x10f7, 0x05},
+        {0x10f8, 0x14}, {0x10fa, 0xff}, {0x10f9, 0x00},
+        {0x11ba, 0x0a}, {0x11a5, 0x2d}, {0x11a6, 0x2d},
+        {0x11a7, 0x3a}, {0x11a8, 0x05}, {0x11a9, 0x04},
+        {0x11aa, 0x3f}, {0x11af, 0x28}, {0x11b0, 0xd8},
+        {0x11b1, 0x14}, {0x11b2, 0xec}, {0x11b3, 0x32},
+        {0x11b4, 0xdd}, {0x11b5, 0x32}, {0x11b6, 0xdd},
+        {0x10e0, 0x2c}, {0x11bc, 0x40}, {0x11bd, 0x01},
+        {0x11be, 0xf0}, {0x11bf, 0x00}, {0x118c, 0x1f},
+        {0x118d, 0x1f}, {0x118e, 0x1f}, {0x118f, 0x1f},
+        {0x1180, 0x01}, {0x1181, 0x00}, {0x1182, 0x01},
+        {0x1183, 0x00}, {0x1184, 0x50}, {0x1185, 0x80}
+};
+
+/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */
+static u8 ov_gain[] = {
+        0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */,
+        0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */,
+        0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */,
+        0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */,
+        0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */,
+        0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */,
+        0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */,
+        0x70 /* 8x */
+};
+
+/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */
+static u16 micron1_gain[] = {
+        /* 1x   1.25x   1.5x    1.75x */
+        0x0020, 0x0028, 0x0030, 0x0038,
+        /* 2x   2.25x   2.5x    2.75x */
+        0x00a0, 0x00a4, 0x00a8, 0x00ac,
+        /* 3x   3.25x   3.5x    3.75x */
+        0x00b0, 0x00b4, 0x00b8, 0x00bc,
+        /* 4x   4.25x   4.5x    4.75x */
+        0x00c0, 0x00c4, 0x00c8, 0x00cc,
+        /* 5x   5.25x   5.5x    5.75x */
+        0x00d0, 0x00d4, 0x00d8, 0x00dc,
+        /* 6x   6.25x   6.5x    6.75x */
+        0x00e0, 0x00e4, 0x00e8, 0x00ec,
+        /* 7x   7.25x   7.5x    7.75x */
+        0x00f0, 0x00f4, 0x00f8, 0x00fc,
+        /* 8x */
+        0x01c0
+};
+
+/* mt9m001 sensor uses a different gain formula then other micron sensors */
+/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */
+static u16 micron2_gain[] = {
+        /* 1x   1.25x   1.5x    1.75x */
+        0x0008, 0x000a, 0x000c, 0x000e,
+        /* 2x   2.25x   2.5x    2.75x */
+        0x0010, 0x0012, 0x0014, 0x0016,
+        /* 3x   3.25x   3.5x    3.75x */
+        0x0018, 0x001a, 0x001c, 0x001e,
+        /* 4x   4.25x   4.5x    4.75x */
+        0x0020, 0x0051, 0x0052, 0x0053,
+        /* 5x   5.25x   5.5x    5.75x */
+        0x0054, 0x0055, 0x0056, 0x0057,
+        /* 6x   6.25x   6.5x    6.75x */
+        0x0058, 0x0059, 0x005a, 0x005b,
+        /* 7x   7.25x   7.5x    7.75x */
+        0x005c, 0x005d, 0x005e, 0x005f,
+        /* 8x */
+        0x0060
+};
+
+/* Gain = .5 + bit[7:0] / 16 */
+static u8 hv7131r_gain[] = {
+        0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */,
+        0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */,
+        0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */,
+        0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */,
+        0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */,
+        0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */,
+        0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */,
+        0x78 /* 8x */
+};
+
+static u8 soi968_init[][2] = {
+        {0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f},
+        {0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00},
+        {0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c},
+        {0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff},
+        {0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20},
+        {0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e},
+        {0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13},
+        {0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79},
+        {0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40},
+        {0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32},
+        {0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80},
+};
+
+static u8 ov7660_init[][2] = {
+        {0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3},
+        {0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40},
+        {0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a},
+        {0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43},
+        {0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6},
+        {0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50},
+};
+
+static u8 ov7670_init[][2] = {
+        {0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01},
+        {0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00},
+        {0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0},
+        {0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00},
+        {0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07},
+        {0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75},
+        {0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8},
+        {0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5},
+        {0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27},
+        {0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b},
+        {0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a},
+        {0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00},
+        {0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00},
+        {0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80},
+        {0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82},
+        {0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20},
+        {0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c},
+        {0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66},
+        {0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11},
+        {0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40},
+        {0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02},
+        {0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a},
+        {0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08},
+        {0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04},
+        {0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30},
+        {0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88},
+        {0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30},
+        {0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99},
+        {0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0},
+        {0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e},
+        {0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01},
+        {0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20},
+        {0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0},
+        {0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30},
+        {0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06},
+        {0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a},
+        {0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a},
+        {0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84},
+        {0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d},
+        {0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d},
+        {0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00},
+        {0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00},
+        {0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60},
+        {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d},
+        {0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e},
+        {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56},
+        {0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03},
+        {0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47},
+        {0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74},
+        {0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2},
+        {0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00},
+        {0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a},
+        {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00},
+        {0x93, 0x00},
+};
+
+static u8 ov9650_init[][2] = {
+        {0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78},
+        {0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03},
+        {0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00},
+        {0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00},
+        {0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c},
+        {0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2},
+        {0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07},
+        {0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00},
+        {0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04},
+        {0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68},
+        {0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80},
+        {0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00},
+        {0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00},
+        {0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30},
+        {0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf},
+        {0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00},
+        {0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01},
+        {0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19},
+        {0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1},
+        {0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80},
+        {0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00},
+        {0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20},
+        {0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf},
+        {0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88},
+        {0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00},
+        {0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8},
+        {0xaa, 0x92}, {0xab, 0x0a},
+};
+
+static u8 ov9655_init[][2] = {
+        {0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61},
+        {0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24},
+        {0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08},
+        {0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf},
+        {0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12},
+        {0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c},
+        {0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40},
+        {0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a},
+        {0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc},
+        {0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04},
+        {0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02},
+        {0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c},
+        {0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60},
+        {0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04},
+        {0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80},
+        {0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf},
+        {0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b},
+        {0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01},
+        {0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0},
+        {0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61},
+        {0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a},
+        {0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01},
+        {0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10},
+        {0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04},
+        {0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00},
+        {0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80},
+        {0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d},
+        {0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14},
+        {0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf},
+        {0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00},
+        {0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00},
+        {0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03},
+        {0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03},
+        {0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13},
+};
+
+static u16 mt9v112_init[][2] = {
+        {0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020},
+        {0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b},
+        {0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001},
+        {0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a},
+        {0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58},
+        {0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001},
+        {0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020},
+        {0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020},
+        {0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020},
+        {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+        {0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2},
+        {0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+        {0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020},
+        {0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+        {0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae},
+        {0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae},
+};
+
+static u16 mt9v111_init[][2] = {
+        {0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000},
+        {0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1},
+        {0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002},
+        {0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03},
+        {0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c},
+        {0x2d, 0xf0a0}, {0x2e, 0x0c64}, {0x2f, 0x0064},
+        {0x67, 0x4010}, {0x06, 0x301e}, {0x08, 0x0480},
+        {0x01, 0x0004}, {0x02, 0x0016}, {0x03, 0x01e6},
+        {0x04, 0x0286}, {0x05, 0x0004}, {0x06, 0x0000},
+        {0x07, 0x3002}, {0x08, 0x0008}, {0x0c, 0x0000},
+        {0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000},
+        {0x10, 0x0000}, {0x11, 0x0000}, {0x12, 0x00b0},
+        {0x13, 0x007c}, {0x14, 0x0000}, {0x15, 0x0000},
+        {0x16, 0x0000}, {0x17, 0x0000}, {0x18, 0x0000},
+        {0x19, 0x0000}, {0x1a, 0x0000}, {0x1b, 0x0000},
+        {0x1c, 0x0000}, {0x1d, 0x0000}, {0x30, 0x0000},
+        {0x30, 0x0005}, {0x31, 0x0000}, {0x02, 0x0016},
+        {0x03, 0x01e1}, {0x04, 0x0281}, {0x05, 0x0004},
+        {0x06, 0x0000}, {0x07, 0x3002}, {0x06, 0x002d},
+        {0x05, 0x0004}, {0x09, 0x0064}, {0x2b, 0x00a0},
+        {0x2c, 0x00a0}, {0x2d, 0x00a0}, {0x2e, 0x00a0},
+        {0x02, 0x0016}, {0x03, 0x01e1}, {0x04, 0x0281},
+        {0x05, 0x0004}, {0x06, 0x002d}, {0x07, 0x3002},
+        {0x0e, 0x0008}, {0x06, 0x002d}, {0x05, 0x0004},
+};
+
+static u16 mt9v011_init[][2] = {
+        {0x07, 0x0002}, {0x0d, 0x0001}, {0x0d, 0x0000},
+        {0x01, 0x0008}, {0x02, 0x0016}, {0x03, 0x01e1},
+        {0x04, 0x0281}, {0x05, 0x0083}, {0x06, 0x0006},
+        {0x0d, 0x0002}, {0x0a, 0x0000}, {0x0b, 0x0000},
+        {0x0c, 0x0000}, {0x0d, 0x0000}, {0x0e, 0x0000},
+        {0x0f, 0x0000}, {0x10, 0x0000}, {0x11, 0x0000},
+        {0x12, 0x0000}, {0x13, 0x0000}, {0x14, 0x0000},
+        {0x15, 0x0000}, {0x16, 0x0000}, {0x17, 0x0000},
+        {0x18, 0x0000}, {0x19, 0x0000}, {0x1a, 0x0000},
+        {0x1b, 0x0000}, {0x1c, 0x0000}, {0x1d, 0x0000},
+        {0x32, 0x0000}, {0x20, 0x1101}, {0x21, 0x0000},
+        {0x22, 0x0000}, {0x23, 0x0000}, {0x24, 0x0000},
+        {0x25, 0x0000}, {0x26, 0x0000}, {0x27, 0x0024},
+        {0x2f, 0xf7b0}, {0x30, 0x0005}, {0x31, 0x0000},
+        {0x32, 0x0000}, {0x33, 0x0000}, {0x34, 0x0100},
+        {0x3d, 0x068f}, {0x40, 0x01e0}, {0x41, 0x00d1},
+        {0x44, 0x0082}, {0x5a, 0x0000}, {0x5b, 0x0000},
+        {0x5c, 0x0000}, {0x5d, 0x0000}, {0x5e, 0x0000},
+        {0x5f, 0xa31d}, {0x62, 0x0611}, {0x0a, 0x0000},
+        {0x06, 0x0029}, {0x05, 0x0009}, {0x20, 0x1101},
+        {0x20, 0x1101}, {0x09, 0x0064}, {0x07, 0x0003},
+        {0x2b, 0x0033}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+        {0x2e, 0x0033}, {0x07, 0x0002}, {0x06, 0x0000},
+        {0x06, 0x0029}, {0x05, 0x0009},
+};
+
+static u16 mt9m001_init[][2] = {
+        {0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
+        {0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
+        {0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
+        {0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
+        {0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
+        {0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
+        {0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
+        {0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
+        {0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
+        {0x2e, 0x0029}, {0x07, 0x0002},
+};
+
+static u16 mt9m111_init[][2] = {
+        {0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009},
+        {0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300},
+        {0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200},
+        {0x06, 0x308e}, {0xf0, 0x0000},
+};
+
+static u8 hv7131r_init[][2] = {
+        {0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08},
+        {0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0},
+        {0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08},
+        {0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07},
+        {0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62},
+        {0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10},
+        {0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00},
+        {0x23, 0x09}, {0x01, 0x08},
+};
+
+int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
+{
+        struct usb_device *dev = gspca_dev->dev;
+        int result;
+        result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+                        0x00,
+                        USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+                        reg,
+                        0x00,
+                        gspca_dev->usb_buf,
+                        length,
+                        500);
+        if (unlikely(result < 0 || result != length)) {
+                err("Read register failed 0x%02X", reg);
+                return -EIO;
+        }
+        return 0;
+}
+
+int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length)
+{
+        struct usb_device *dev = gspca_dev->dev;
+        int result;
+        memcpy(gspca_dev->usb_buf, buffer, length);
+        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+                        0x08,
+                        USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+                        reg,
+                        0x00,
+                        gspca_dev->usb_buf,
+                        length,
+                        500);
+        if (unlikely(result < 0 || result != length)) {
+                err("Write register failed index 0x%02X", reg);
+                return -EIO;
+        }
+        return 0;
+}
+
+int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value)
+{
+        u8 data[1] = {value};
+        return reg_w(gspca_dev, reg, data, 1);
+}
+
+int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer)
+{
+        int i;
+        reg_w(gspca_dev, 0x10c0, buffer, 8);
+        for (i = 0; i < 5; i++) {
+                reg_r(gspca_dev, 0x10c0, 1);
+                if (gspca_dev->usb_buf[0] & 0x04) {
+                        if (gspca_dev->usb_buf[0] & 0x08)
+                                return -1;
+                        return 0;
+                }
+                msleep(1);
+        }
+        return -1;
+}
+
+int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        u8 row[8];
+
+        /*
+         * from the point of view of the bridge, the length
+         * includes the address
+         */
+        row[0] = 0x81 | (2 << 4);
+        row[1] = sd->i2c_addr;
+        row[2] = reg;
+        row[3] = val;
+        row[4] = 0x00;
+        row[5] = 0x00;
+        row[6] = 0x00;
+        row[7] = 0x10;
+
+        return i2c_w(gspca_dev, row);
+}
+
+int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 row[8];
+
+        /*
+         * from the point of view of the bridge, the length
+         * includes the address
+         */
+        row[0] = 0x81 | (3 << 4);
+        row[1] = sd->i2c_addr;
+        row[2] = reg;
+        row[3] = (val >> 8) & 0xff;
+        row[4] = val & 0xff;
+        row[5] = 0x00;
+        row[6] = 0x00;
+        row[7] = 0x10;
+
+        return i2c_w(gspca_dev, row);
+}
+
+int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 row[8];
+
+        row[0] = 0x81 | 0x10;
+        row[1] = sd->i2c_addr;
+        row[2] = reg;
+        row[3] = 0;
+        row[4] = 0;
+        row[5] = 0;
+        row[6] = 0;
+        row[7] = 0x10;
+        reg_w(gspca_dev, 0x10c0, row, 8);
+        msleep(1);
+        row[0] = 0x81 | (2 << 4) | 0x02;
+        row[2] = 0;
+        reg_w(gspca_dev, 0x10c0, row, 8);
+        msleep(1);
+        reg_r(gspca_dev, 0x10c2, 5);
+        *val = gspca_dev->usb_buf[3];
+        return 0;
+}
+
+int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 row[8];
+
+        row[0] = 0x81 | 0x10;
+        row[1] = sd->i2c_addr;
+        row[2] = reg;
+        row[3] = 0;
+        row[4] = 0;
+        row[5] = 0;
+        row[6] = 0;
+        row[7] = 0x10;
+        reg_w(gspca_dev, 0x10c0, row, 8);
+        msleep(1);
+        row[0] = 0x81 | (3 << 4) | 0x02;
+        row[2] = 0;
+        reg_w(gspca_dev, 0x10c0, row, 8);
+        msleep(1);
+        reg_r(gspca_dev, 0x10c2, 5);
+        *val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3];
+        return 0;
+}
+
+static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
+                if (i2c_w1(gspca_dev, ov9650_init[i][0],
+                                ov9650_init[i][1]) < 0) {
+                        err("OV9650 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        sd->hstart = 1;
+        sd->vstart = 7;
+        return 0;
+}
+
+static int ov9655_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
+                if (i2c_w1(gspca_dev, ov9655_init[i][0],
+                                ov9655_init[i][1]) < 0) {
+                        err("OV9655 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        /* disable hflip and vflip */
+        gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+        sd->hstart = 0;
+        sd->vstart = 7;
+        return 0;
+}
+
+static int soi968_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
+                if (i2c_w1(gspca_dev, soi968_init[i][0],
+                                soi968_init[i][1]) < 0) {
+                        err("SOI968 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        /* disable hflip and vflip */
+        gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+        sd->hstart = 60;
+        sd->vstart = 11;
+        return 0;
+}
+
+static int ov7660_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
+                if (i2c_w1(gspca_dev, ov7660_init[i][0],
+                                ov7660_init[i][1]) < 0) {
+                        err("OV7660 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        /* disable hflip and vflip */
+        gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+        sd->hstart = 1;
+        sd->vstart = 1;
+        return 0;
+}
+
+static int ov7670_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
+                if (i2c_w1(gspca_dev, ov7670_init[i][0],
+                                ov7670_init[i][1]) < 0) {
+                        err("OV7670 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        /* disable hflip and vflip */
+        gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+        sd->hstart = 0;
+        sd->vstart = 1;
+        return 0;
+}
+
+static int mt9v_init_sensor(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int i;
+        u16 value;
+        int ret;
+
+        sd->i2c_addr = 0x5d;
+        ret = i2c_r2(gspca_dev, 0xff, &value);
+        if ((ret == 0) && (value == 0x8243)) {
+                for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
+                        if (i2c_w2(gspca_dev, mt9v011_init[i][0],
+                                        mt9v011_init[i][1]) < 0) {
+                                err("MT9V011 sensor initialization failed");
+                                return -ENODEV;
+                        }
+                }
+                sd->hstart = 2;
+                sd->vstart = 2;
+                sd->sensor = SENSOR_MT9V011;
+                info("MT9V011 sensor detected");
+                return 0;
+        }
+
+        sd->i2c_addr = 0x5c;
+        i2c_w2(gspca_dev, 0x01, 0x0004);
+        ret = i2c_r2(gspca_dev, 0xff, &value);
+        if ((ret == 0) && (value == 0x823a)) {
+                for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
+                        if (i2c_w2(gspca_dev, mt9v111_init[i][0],
+                                        mt9v111_init[i][1]) < 0) {
+                                err("MT9V111 sensor initialization failed");
+                                return -ENODEV;
+                        }
+                }
+                sd->hstart = 2;
+                sd->vstart = 2;
+                sd->sensor = SENSOR_MT9V111;
+                info("MT9V111 sensor detected");
+                return 0;
+        }
+
+        sd->i2c_addr = 0x5d;
+        ret = i2c_w2(gspca_dev, 0xf0, 0x0000);
+        if (ret < 0) {
+                sd->i2c_addr = 0x48;
+                i2c_w2(gspca_dev, 0xf0, 0x0000);
+        }
+        ret = i2c_r2(gspca_dev, 0x00, &value);
+        if ((ret == 0) && (value == 0x1229)) {
+                for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
+                        if (i2c_w2(gspca_dev, mt9v112_init[i][0],
+                                        mt9v112_init[i][1]) < 0) {
+                                err("MT9V112 sensor initialization failed");
+                                return -ENODEV;
+                        }
+                }
+                sd->hstart = 6;
+                sd->vstart = 2;
+                sd->sensor = SENSOR_MT9V112;
+                info("MT9V112 sensor detected");
+                return 0;
+        }
+
+        return -ENODEV;
+}
+
+static int mt9m111_init_sensor(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int i;
+        for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
+                if (i2c_w2(gspca_dev, mt9m111_init[i][0],
+                                mt9m111_init[i][1]) < 0) {
+                        err("MT9M111 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        sd->hstart = 0;
+        sd->vstart = 2;
+        return 0;
+}
+
+static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int i;
+        for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
+                if (i2c_w2(gspca_dev, mt9m001_init[i][0],
+                                mt9m001_init[i][1]) < 0) {
+                        err("MT9M001 sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        /* disable hflip and vflip */
+        gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+        sd->hstart = 2;
+        sd->vstart = 2;
+        return 0;
+}
+
+static int hv7131r_init_sensor(struct gspca_dev *gspca_dev)
+{
+        int i;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
+                if (i2c_w1(gspca_dev, hv7131r_init[i][0],
+                                hv7131r_init[i][1]) < 0) {
+                        err("HV7131R Sensor initialization failed");
+                        return -ENODEV;
+                }
+        }
+        sd->hstart = 0;
+        sd->vstart = 1;
+        return 0;
+}
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+static int input_kthread(void *data)
+{
+        struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        DECLARE_WAIT_QUEUE_HEAD(wait);
+        set_freezable();
+        for (;;) {
+                if (kthread_should_stop())
+                        break;
+
+                if (reg_r(gspca_dev, 0x1005, 1) < 0)
+                        continue;
+
+                input_report_key(sd->input_dev,
+                                 KEY_CAMERA,
+                                 gspca_dev->usb_buf[0] & sd->input_gpio);
+                input_sync(sd->input_dev);
+
+                wait_event_freezable_timeout(wait,
+                                             kthread_should_stop(),
+                                             msecs_to_jiffies(100));
+        }
+        return 0;
+}
+
+
+static int sn9c20x_input_init(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        if (sd->input_gpio == 0)
+                return 0;
+
+        sd->input_dev = input_allocate_device();
+        if (!sd->input_dev)
+                return -ENOMEM;
+
+        sd->input_dev->name = "SN9C20X Webcam";
+
+        sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s",
+                                         gspca_dev->dev->bus->bus_name,
+                                         gspca_dev->dev->devpath);
+
+        if (!sd->input_dev->phys)
+                return -ENOMEM;
+
+        usb_to_input_id(gspca_dev->dev, &sd->input_dev->id);
+        sd->input_dev->dev.parent = &gspca_dev->dev->dev;
+
+        set_bit(EV_KEY, sd->input_dev->evbit);
+        set_bit(KEY_CAMERA, sd->input_dev->keybit);
+
+        if (input_register_device(sd->input_dev))
+                return -EINVAL;
+
+        sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d",
+                                     gspca_dev->vdev.minor);
+
+        if (IS_ERR(sd->input_task))
+                return -EINVAL;
+
+        return 0;
+}
+
+static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        if (sd->input_task != NULL && !IS_ERR(sd->input_task))
+                kthread_stop(sd->input_task);
+
+        if (sd->input_dev != NULL) {
+                input_unregister_device(sd->input_dev);
+                kfree(sd->input_dev->phys);
+                input_free_device(sd->input_dev);
+                sd->input_dev = NULL;
+        }
+}
+#endif
+
+static int set_cmatrix(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        s32 hue_coord, hue_index = 180 + sd->hue;
+        u8 cmatrix[21];
+        memset(cmatrix, 0, 21);
+
+        cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
+        cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
+        cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
+        cmatrix[18] = sd->brightness - 0x80;
+
+        hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
+        cmatrix[6] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
+        cmatrix[8] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
+        cmatrix[10] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
+        cmatrix[12] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
+        cmatrix[14] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
+        cmatrix[16] = (unsigned char)(hue_coord & 0xff);
+        cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+        return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
+}
+
+static int set_gamma(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 gamma[17];
+        u8 gval = sd->gamma * 0xb8 / 0x100;
+
+
+        gamma[0] = 0x0a;
+        gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8);
+        gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8);
+        gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8);
+        gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8);
+        gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8);
+        gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8);
+        gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8);
+        gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8);
+        gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8);
+        gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8);
+        gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8);
+        gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8);
+        gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8);
+        gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8);
+        gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8);
+        gamma[16] = 0xf5;
+
+        return reg_w(gspca_dev, 0x1190, gamma, 17);
+}
+
+static int set_redblue(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        reg_w1(gspca_dev, 0x118c, sd->red);
+        reg_w1(gspca_dev, 0x118f, sd->blue);
+        return 0;
+}
+
+static int set_hvflip(struct gspca_dev *gspca_dev)
+{
+        u8 value, tslb;
+        u16 value2;
+        struct sd *sd = (struct sd *) gspca_dev;
+        switch (sd->sensor) {
+        case SENSOR_OV9650:
+                i2c_r1(gspca_dev, 0x1e, &value);
+                value &= ~0x30;
+                tslb = 0x01;
+                if (sd->hflip)
+                        value |= 0x20;
+                if (sd->vflip) {
+                        value |= 0x10;
+                        tslb = 0x49;
+                }
+                i2c_w1(gspca_dev, 0x1e, value);
+                i2c_w1(gspca_dev, 0x3a, tslb);
+                break;
+        case SENSOR_MT9V111:
+        case SENSOR_MT9V011:
+                i2c_r2(gspca_dev, 0x20, &value2);
+                value2 &= ~0xc0a0;
+                if (sd->hflip)
+                        value2 |= 0x8080;
+                if (sd->vflip)
+                        value2 |= 0x4020;
+                i2c_w2(gspca_dev, 0x20, value2);
+                break;
+        case SENSOR_MT9M111:
+        case SENSOR_MT9V112:
+                i2c_r2(gspca_dev, 0x20, &value2);
+                value2 &= ~0x0003;
+                if (sd->hflip)
+                        value2 |= 0x0002;
+                if (sd->vflip)
+                        value2 |= 0x0001;
+                i2c_w2(gspca_dev, 0x20, value2);
+                break;
+        case SENSOR_HV7131R:
+                i2c_r1(gspca_dev, 0x01, &value);
+                value &= ~0x03;
+                if (sd->vflip)
+                        value |= 0x01;
+                if (sd->hflip)
+                        value |= 0x02;
+                i2c_w1(gspca_dev, 0x01, value);
+                break;
+        }
+        return 0;
+}
+
+static int set_exposure(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e};
+        switch (sd->sensor) {
+        case SENSOR_OV7660:
+        case SENSOR_OV7670:
+        case SENSOR_SOI968:
+        case SENSOR_OV9655:
+        case SENSOR_OV9650:
+                exp[0] |= (3 << 4);
+                exp[2] = 0x2d;
+                exp[3] = sd->exposure & 0xff;
+                exp[4] = sd->exposure >> 8;
+                break;
+        case SENSOR_MT9M001:
+        case SENSOR_MT9M111:
+        case SENSOR_MT9V112:
+        case SENSOR_MT9V111:
+        case SENSOR_MT9V011:
+                exp[0] |= (3 << 4);
+                exp[2] = 0x09;
+                exp[3] = sd->exposure >> 8;
+                exp[4] = sd->exposure & 0xff;
+                break;
+        case SENSOR_HV7131R:
+                exp[0] |= (4 << 4);
+                exp[2] = 0x25;
+                exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16;
+                exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8;
+                exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff;
+                break;
+        }
+        i2c_w(gspca_dev, exp);
+        return 0;
+}
+
+static int set_gain(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d};
+        switch (sd->sensor) {
+        case SENSOR_OV7660:
+        case SENSOR_OV7670:
+        case SENSOR_SOI968:
+        case SENSOR_OV9655:
+        case SENSOR_OV9650:
+                gain[0] |= (2 << 4);
+                gain[3] = ov_gain[sd->gain];
+                break;
+        case SENSOR_MT9V011:
+        case SENSOR_MT9V111:
+                gain[0] |= (3 << 4);
+                gain[2] = 0x35;
+                gain[3] = micron1_gain[sd->gain] >> 8;
+                gain[4] = micron1_gain[sd->gain] & 0xff;
+                break;
+        case SENSOR_MT9V112:
+        case SENSOR_MT9M111:
+                gain[0] |= (3 << 4);
+                gain[2] = 0x2f;
+                gain[3] = micron1_gain[sd->gain] >> 8;
+                gain[4] = micron1_gain[sd->gain] & 0xff;
+                break;
+        case SENSOR_MT9M001:
+                gain[0] |= (3 << 4);
+                gain[2] = 0x2f;
+                gain[3] = micron2_gain[sd->gain] >> 8;
+                gain[4] = micron2_gain[sd->gain] & 0xff;
+                break;
+        case SENSOR_HV7131R:
+                gain[0] |= (2 << 4);
+                gain[2] = 0x30;
+                gain[3] = hv7131r_gain[sd->gain];
+                break;
+        }
+        i2c_w(gspca_dev, gain);
+        return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->brightness = val;
+        if (gspca_dev->streaming)
+                return set_cmatrix(gspca_dev);
+        return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->brightness;
+        return 0;
+}
+
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->contrast = val;
+        if (gspca_dev->streaming)
+                return set_cmatrix(gspca_dev);
+        return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->contrast;
+        return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->saturation = val;
+        if (gspca_dev->streaming)
+                return set_cmatrix(gspca_dev);
+        return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->saturation;
+        return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->hue = val;
+        if (gspca_dev->streaming)
+                return set_cmatrix(gspca_dev);
+        return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->hue;
+        return 0;
+}
+
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->gamma = val;
+        if (gspca_dev->streaming)
+                return set_gamma(gspca_dev);
+        return 0;
+}
+
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->gamma;
+        return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->red = val;
+        if (gspca_dev->streaming)
+                return set_redblue(gspca_dev);
+        return 0;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->red;
+        return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->blue = val;
+        if (gspca_dev->streaming)
+                return set_redblue(gspca_dev);
+        return 0;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->blue;
+        return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->hflip = val;
+        if (gspca_dev->streaming)
+                return set_hvflip(gspca_dev);
+        return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->hflip;
+        return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->vflip = val;
+        if (gspca_dev->streaming)
+                return set_hvflip(gspca_dev);
+        return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->vflip;
+        return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->exposure = val;
+        if (gspca_dev->streaming)
+                return set_exposure(gspca_dev);
+        return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->exposure;
+        return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        sd->gain = val;
+        if (gspca_dev->streaming)
+                return set_gain(gspca_dev);
+        return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->gain;
+        return 0;
+}
+
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        sd->auto_exposure = val;
+        return 0;
+}
+
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        *val = sd->auto_exposure;
+        return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
+                        struct v4l2_dbg_register *reg)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        switch (reg->match.type) {
+        case V4L2_CHIP_MATCH_HOST:
+                if (reg->match.addr != 0)
+                        return -EINVAL;
+                if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+                        return -EINVAL;
+                if (reg_r(gspca_dev, reg->reg, 1) < 0)
+                        return -EINVAL;
+                reg->val = gspca_dev->usb_buf[0];
+                return 0;
+        case V4L2_CHIP_MATCH_I2C_ADDR:
+                if (reg->match.addr != sd->i2c_addr)
+                        return -EINVAL;
+                if (sd->sensor >= SENSOR_MT9V011 &&
+                    sd->sensor <= SENSOR_MT9M111) {
+                        if (i2c_r2(gspca_dev, reg->reg, (u16 *)&reg->val) < 0)
+                                return -EINVAL;
+                } else {
+                        if (i2c_r1(gspca_dev, reg->reg, (u8 *)&reg->val) < 0)
+                                return -EINVAL;
+                }
+                return 0;
+        }
+        return -EINVAL;
+}
+
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+                        struct v4l2_dbg_register *reg)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        switch (reg->match.type) {
+        case V4L2_CHIP_MATCH_HOST:
+                if (reg->match.addr != 0)
+                        return -EINVAL;
+                if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+                        return -EINVAL;
+                if (reg_w1(gspca_dev, reg->reg, reg->val) < 0)
+                        return -EINVAL;
+                return 0;
+        case V4L2_CHIP_MATCH_I2C_ADDR:
+                if (reg->match.addr != sd->i2c_addr)
+                        return -EINVAL;
+                if (sd->sensor >= SENSOR_MT9V011 &&
+                    sd->sensor <= SENSOR_MT9M111) {
+                        if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0)
+                                return -EINVAL;
+                } else {
+                        if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0)
+                                return -EINVAL;
+                }
+                return 0;
+        }
+        return -EINVAL;
+}
+#endif
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+                        struct v4l2_dbg_chip_ident *chip)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+
+        switch (chip->match.type) {
+        case V4L2_CHIP_MATCH_HOST:
+                if (chip->match.addr != 0)
+                        return -EINVAL;
+                chip->revision = 0;
+                chip->ident = V4L2_IDENT_SN9C20X;
+                return 0;
+        case V4L2_CHIP_MATCH_I2C_ADDR:
+                if (chip->match.addr != sd->i2c_addr)
+                        return -EINVAL;
+                chip->revision = 0;
+                chip->ident = i2c_ident[sd->sensor];
+                return 0;
+        }
+        return -EINVAL;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+                        const struct usb_device_id *id)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        struct cam *cam;
+
+        cam = &gspca_dev->cam;
+
+        sd->sensor = (id->driver_info >> 8) & 0xff;
+        sd->i2c_addr = id->driver_info & 0xff;
+
+        switch (sd->sensor) {
+        case SENSOR_OV9650:
+                cam->cam_mode = sxga_mode;
+                cam->nmodes = ARRAY_SIZE(sxga_mode);
+                break;
+        default:
+                cam->cam_mode = vga_mode;
+                cam->nmodes = ARRAY_SIZE(vga_mode);
+        }
+
+        sd->old_step = 0;
+        sd->older_step = 0;
+        sd->exposure_step = 16;
+
+        sd->brightness = BRIGHTNESS_DEFAULT;
+        sd->contrast = CONTRAST_DEFAULT;
+        sd->saturation = SATURATION_DEFAULT;
+        sd->hue = HUE_DEFAULT;
+        sd->gamma = GAMMA_DEFAULT;
+        sd->red = RED_DEFAULT;
+        sd->blue = BLUE_DEFAULT;
+
+        sd->hflip = HFLIP_DEFAULT;
+        sd->vflip = VFLIP_DEFAULT;
+        sd->exposure = EXPOSURE_DEFAULT;
+        sd->gain = GAIN_DEFAULT;
+        sd->auto_exposure = AUTO_EXPOSURE_DEFAULT;
+
+        sd->quality = 95;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+        sd->input_gpio = (id->driver_info >> 16) & 0xff;
+        if (sn9c20x_input_init(gspca_dev) < 0)
+                return -ENODEV;
+#endif
+        return 0;
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int i;
+        u8 value;
+        u8 i2c_init[9] =
+                {0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03};
+
+        for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
+                value = bridge_init[i][1];
+                if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
+                        err("Device initialization failed");
+                        return -ENODEV;
+                }
+        }
+
+        if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
+                err("Device initialization failed");
+                return -ENODEV;
+        }
+
+        switch (sd->sensor) {
+        case SENSOR_OV9650:
+                if (ov9650_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("OV9650 sensor detected");
+                break;
+        case SENSOR_OV9655:
+                if (ov9655_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("OV9655 sensor detected");
+                break;
+        case SENSOR_SOI968:
+                if (soi968_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("SOI968 sensor detected");
+                break;
+        case SENSOR_OV7660:
+                if (ov7660_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("OV7660 sensor detected");
+                break;
+        case SENSOR_OV7670:
+                if (ov7670_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("OV7670 sensor detected");
+                break;
+        case SENSOR_MT9VPRB:
+                if (mt9v_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                break;
+        case SENSOR_MT9M111:
+                if (mt9m111_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("MT9M111 sensor detected");
+                break;
+        case SENSOR_MT9M001:
+                if (mt9m001_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("MT9M001 sensor detected");
+                break;
+        case SENSOR_HV7131R:
+                if (hv7131r_init_sensor(gspca_dev) < 0)
+                        return -ENODEV;
+                info("HV7131R sensor detected");
+                break;
+        default:
+                info("Unsupported Sensor");
+                return -ENODEV;
+        }
+
+        return 0;
+}
+
+static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        u8 value;
+        switch (sd->sensor) {
+        case SENSOR_OV9650:
+                if (mode & MODE_SXGA) {
+                        i2c_w1(gspca_dev, 0x17, 0x1b);
+                        i2c_w1(gspca_dev, 0x18, 0xbc);
+                        i2c_w1(gspca_dev, 0x19, 0x01);
+                        i2c_w1(gspca_dev, 0x1a, 0x82);
+                        i2c_r1(gspca_dev, 0x12, &value);
+                        i2c_w1(gspca_dev, 0x12, value & 0x07);
+                } else {
+                        i2c_w1(gspca_dev, 0x17, 0x24);
+                        i2c_w1(gspca_dev, 0x18, 0xc5);
+                        i2c_w1(gspca_dev, 0x19, 0x00);
+                        i2c_w1(gspca_dev, 0x1a, 0x3c);
+                        i2c_r1(gspca_dev, 0x12, &value);
+                        i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40);
+                }
+                break;
+        }
+}
+
+#define HW_WIN(mode, hstart, vstart) \
+((const u8 []){hstart & 0xff, hstart >> 8, \
+vstart & 0xff, vstart >> 8, \
+(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \
+(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)})
+
+#define CLR_WIN(width, height) \
+((const u8 [])\
+{0, width >> 2, 0, height >> 1,\
+((width >> 10) & 0x01) | ((height >> 8) & 0x6)})
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+        int width = gspca_dev->width;
+        int height = gspca_dev->height;
+        u8 fmt, scale = 0;
+
+        sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (sd->jpeg_hdr == NULL)
+                return -ENOMEM;
+
+        jpeg_define(sd->jpeg_hdr, height, width,
+                        0x21);
+        jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+        if (mode & MODE_RAW)
+                fmt = 0x2d;
+        else if (mode & MODE_JPEG)
+                fmt = 0x2c;
+        else
+                fmt = 0x2f;
+
+        switch (mode & 0x0f) {
+        case 3:
+                scale = 0xc0;
+                info("Set 1280x1024");
+                break;
+        case 2:
+                scale = 0x80;
+                info("Set 640x480");
+                break;
+        case 1:
+                scale = 0x90;
+                info("Set 320x240");
+                break;
+        case 0:
+                scale = 0xa0;
+                info("Set 160x120");
+                break;
+        }
+
+        configure_sensor_output(gspca_dev, mode);
+        reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
+        reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+        reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
+        reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
+        reg_w1(gspca_dev, 0x1189, scale);
+        reg_w1(gspca_dev, 0x10e0, fmt);
+
+        set_cmatrix(gspca_dev);
+        set_gamma(gspca_dev);
+        set_redblue(gspca_dev);
+        set_gain(gspca_dev);
+        set_exposure(gspca_dev);
+        set_hvflip(gspca_dev);
+
+        reg_r(gspca_dev, 0x1061, 1);
+        reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02);
+        return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+        reg_r(gspca_dev, 0x1061, 1);
+        reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        kfree(sd->jpeg_hdr);
+}
+
+static void do_autoexposure(struct gspca_dev *gspca_dev)
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int avg_lum, new_exp;
+
+        if (!sd->auto_exposure)
+                return;
+
+        avg_lum = atomic_read(&sd->avg_lum);
+
+        /*
+         * some hardcoded values are present
+         * like those for maximal/minimal exposure
+         * and exposure steps
+         */
+        if (avg_lum < MIN_AVG_LUM) {
+                if (sd->exposure > 0x1770)
+                        return;
+
+                new_exp = sd->exposure + sd->exposure_step;
+                if (new_exp > 0x1770)
+                        new_exp = 0x1770;
+                if (new_exp < 0x10)
+                        new_exp = 0x10;
+                sd->exposure = new_exp;
+                set_exposure(gspca_dev);
+
+                sd->older_step = sd->old_step;
+                sd->old_step = 1;
+
+                if (sd->old_step ^ sd->older_step)
+                        sd->exposure_step /= 2;
+                else
+                        sd->exposure_step += 2;
+        }
+        if (avg_lum > MAX_AVG_LUM) {
+                if (sd->exposure < 0x10)
+                        return;
+                new_exp = sd->exposure - sd->exposure_step;
+                if (new_exp > 0x1700)
+                        new_exp = 0x1770;
+                if (new_exp < 0x10)
+                        new_exp = 0x10;
+                sd->exposure = new_exp;
+                set_exposure(gspca_dev);
+                sd->older_step = sd->old_step;
+                sd->old_step = 0;
+
+                if (sd->old_step ^ sd->older_step)
+                        sd->exposure_step /= 2;
+                else
+                        sd->exposure_step += 2;
+        }
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+                        struct gspca_frame *frame,      /* target */
+                        u8 *data,                       /* isoc packet */
+                        int len)                        /* iso packet length */
+{
+        struct sd *sd = (struct sd *) gspca_dev;
+        int avg_lum;
+        static unsigned char frame_header[] =
+                {0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+        if (len == 64 && memcmp(data, frame_header, 6) == 0) {
+                avg_lum = ((data[35] >> 2) & 3) |
+                           (data[20] << 2) |
+                           (data[19] << 10);
+                avg_lum += ((data[35] >> 4) & 3) |
+                            (data[22] << 2) |
+                            (data[21] << 10);
+                avg_lum += ((data[35] >> 6) & 3) |
+                            (data[24] << 2) |
+                            (data[23] << 10);
+                avg_lum += (data[36] & 3) |
+                           (data[26] << 2) |
+                           (data[25] << 10);
+                avg_lum += ((data[36] >> 2) & 3) |
+                            (data[28] << 2) |
+                            (data[27] << 10);
+                avg_lum += ((data[36] >> 4) & 3) |
+                            (data[30] << 2) |
+                            (data[29] << 10);
+                avg_lum += ((data[36] >> 6) & 3) |
+                            (data[32] << 2) |
+                            (data[31] << 10);
+                avg_lum += ((data[44] >> 4) & 3) |
+                            (data[34] << 2) |
+                            (data[33] << 10);
+                avg_lum >>= 9;
+                atomic_set(&sd->avg_lum, avg_lum);
+                gspca_frame_add(gspca_dev, LAST_PACKET,
+                                frame, data, len);
+                return;
+        }
+        if (gspca_dev->last_packet_type == LAST_PACKET) {
+                if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
+                                & MODE_JPEG) {
+                        gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                sd->jpeg_hdr, JPEG_HDR_SZ);
+                        gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+                                data, len);
+                } else {
+                        gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+                                data, len);
+                }
+        } else {
+                gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+        }
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+        .name = MODULE_NAME,
+        .ctrls = sd_ctrls,
+        .nctrls = ARRAY_SIZE(sd_ctrls),
+        .config = sd_config,
+        .init = sd_init,
+        .start = sd_start,
+        .stopN = sd_stopN,
+        .stop0 = sd_stop0,
+        .pkt_scan = sd_pkt_scan,
+        .dq_callback = do_autoexposure,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+        .set_register = sd_dbg_s_register,
+        .get_register = sd_dbg_g_register,
+#endif
+        .get_chip_ident = sd_chip_ident,
+};
+
+#define SN9C20X(sensor, i2c_addr, button_mask) \
+        .driver_info =  (button_mask << 16) \
+                        | (SENSOR_ ## sensor << 8) \
+                        | (i2c_addr)
+
+static const __devinitdata struct usb_device_id device_table[] = {
+        {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)},
+        {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)},
+        {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)},
+        {USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)},
+        {USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)},
+        {USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)},
+        {USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)},
+        {USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)},
+        {USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
+        {USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
+        {USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+        {USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)},
+        {USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
+        {USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)},
+        {USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)},
+        {USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)},
+        {USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)},
+        {USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)},
+        {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+                    const struct usb_device_id *id)
+{
+        return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+                                THIS_MODULE);
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+        struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+        sn9c20x_input_cleanup(gspca_dev);
+#endif
+
+        gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+        .name = MODULE_NAME,
+        .id_table = device_table,
+        .probe = sd_probe,
+        .disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+        .suspend = gspca_suspend,
+        .resume = gspca_resume,
+        .reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+        int ret;
+        ret = usb_register(&sd_driver);
+        if (ret < 0)
+                return ret;
+        info("registered");
+        return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+        usb_deregister(&sd_driver);
+        info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0d02f41fa7d0..d6332ab80669 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1634,6 +1634,8 @@ static void setfreq(struct gspca_dev *gspca_dev)
 {
         struct sd *sd = (struct sd *) gspca_dev;
 
+        if (gspca_dev->ctrl_dis & (1 << FREQ_IDX))
+                return;
         if (sd->sensor == SENSOR_OV7660) {
                 switch (sd->freq) {
                 case 0: /* Banding filter disabled */
@@ -1735,6 +1737,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x21);          /* JPEG 422 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 8806b2ff82be..fab7ef85a6c1 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -670,6 +670,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x22);          /* JPEG 411 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index f25be20cf1a6..47628964801e 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -333,6 +333,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x22);          /* JPEG 411 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 3039ec208f3a..e5024c8496ef 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -64,7 +64,7 @@ static struct v4l2_pix_format hdcs1x00_mode[] = {
         {
                 HDCS_1X00_DEF_WIDTH,
                 HDCS_1X00_DEF_HEIGHT,
-                V4L2_PIX_FMT_SBGGR8,
+                V4L2_PIX_FMT_SGRBG8,
                 V4L2_FIELD_NONE,
                 .sizeimage =
                         HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT,
@@ -80,7 +80,7 @@ static struct v4l2_pix_format hdcs1020_mode[] = {
         {
                 HDCS_1020_DEF_WIDTH,
                 HDCS_1020_DEF_HEIGHT,
-                V4L2_PIX_FMT_SBGGR8,
+                V4L2_PIX_FMT_SGRBG8,
                 V4L2_FIELD_NONE,
                 .sizeimage =
                         HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT,
@@ -131,9 +131,11 @@ static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len)
                      (reg + len > 0xff)))
                 return -EINVAL;
 
-        for (i = 0; i < len; i++, reg++) {
-                regs[2*i] = reg;
-                regs[2*i+1] = vals[i];
+        for (i = 0; i < len; i++) {
+                regs[2 * i] = reg;
+                regs[2 * i + 1] = vals[i];
+                /* All addresses are shifted left one bit as bit 0 toggles r/w */
+                reg += 2;
         }
 
         return stv06xx_write_sensor_bytes(sd, regs, len);
@@ -174,7 +176,9 @@ static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state)
         }
 
         ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val);
-        if (ret < 0)
+
+        /* Update the state if the write succeeded */
+        if (!ret)
                 hdcs->state = state;
 
         return ret;
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 9623f294bdac..5127bbf9dd26 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -973,6 +973,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x22);          /* JPEG 411 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 08422d315e68..3d2756f7874a 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7243,6 +7243,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
         /* create the JPEG header */
         sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+        if (!sd->jpeg_hdr)
+                return -ENOMEM;
         jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
                         0x21);          /* JPEG 422 */
         jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 1fe8fc9183a7..b2260de645f0 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -8,6 +8,7 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/delay.h>
+#include <asm/div64.h>
 #include <media/v4l2-device.h>
 #include "mt9v011.h"
 #include <media/v4l2-i2c-drv.h>
@@ -57,6 +58,7 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = {
 struct mt9v011 {
         struct v4l2_subdev sd;
         unsigned width, height;
+        unsigned xtal;
 
         u16 global_gain, red_bal, blue_bal;
 };
@@ -131,7 +133,7 @@ static const struct i2c_reg_value mt9v011_init_default[] = {
                 { R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
                 { R20_MT9V011_READ_MODE, 0x1000 },
 
-                { R07_MT9V011_OUT_CTRL, 0x000a },       /* chip enable */
+                { R07_MT9V011_OUT_CTRL, 0x0002 },       /* chip enable */
 };
 
 static void set_balance(struct v4l2_subdev *sd)
@@ -154,6 +156,31 @@ static void set_balance(struct v4l2_subdev *sd)
         mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
 }
 
+static void calc_fps(struct v4l2_subdev *sd)
+{
+        struct mt9v011 *core = to_mt9v011(sd);
+        unsigned height, width, hblank, vblank, speed;
+        unsigned row_time, t_time;
+        u64 frames_per_ms;
+        unsigned tmp;
+
+        height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+        width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+        hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+        vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+        speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
+
+        row_time = (width + 113 + hblank) * (speed + 2);
+        t_time = row_time * (height + vblank + 1);
+
+        frames_per_ms = core->xtal * 1000l;
+        do_div(frames_per_ms, t_time);
+        tmp = frames_per_ms;
+
+        v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
+                tmp / 1000, tmp % 1000, t_time);
+}
+
 static void set_res(struct v4l2_subdev *sd)
 {
         struct mt9v011 *core = to_mt9v011(sd);
@@ -175,10 +202,12 @@ static void set_res(struct v4l2_subdev *sd)
         mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
         mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
 
-        vstart = 8 + (640 - core->height) / 2;
+        vstart = 8 + (480 - core->height) / 2;
         mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
         mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
         mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+
+        calc_fps(sd);
 };
 
 static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
@@ -215,6 +244,23 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
         return -EINVAL;
 }
 
+static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+        int i;
+
+        v4l2_dbg(1, debug, sd, "queryctrl called\n");
+
+        for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
+                if (qc->id && qc->id == mt9v011_qctrl[i].id) {
+                        memcpy(qc, &(mt9v011_qctrl[i]),
+                               sizeof(*qc));
+                        return 0;
+                }
+
+        return -EINVAL;
+}
+
+
 static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
         struct mt9v011 *core = to_mt9v011(sd);
@@ -294,6 +340,22 @@ static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
         return 0;
 }
 
+static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
+{
+        struct mt9v011 *core = to_mt9v011(sd);
+        unsigned *xtal = data;
+
+        v4l2_dbg(1, debug, sd, "s_config called\n");
+
+        if (xtal) {
+                core->xtal = *xtal;
+                v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+                         *xtal / 1000000, (*xtal / 1000) % 1000);
+        }
+
+        return 0;
+}
+
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int mt9v011_g_register(struct v4l2_subdev *sd,
@@ -338,9 +400,11 @@ static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
 }
 
 static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+        .queryctrl = mt9v011_queryctrl,
         .g_ctrl = mt9v011_g_ctrl,
         .s_ctrl = mt9v011_s_ctrl,
         .reset = mt9v011_reset,
+        .s_config = mt9v011_s_config,
         .g_chip_ident = mt9v011_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
         .g_register = mt9v011_g_register,
@@ -395,6 +459,7 @@ static int mt9v011_probe(struct i2c_client *c,
         core->global_gain = 0x0024;
         core->width  = 640;
         core->height = 480;
+        core->xtal = 27000000;  /* Hz */
 
         v4l_info(c, "chip found @ 0x%02x (%s)\n",
                  c->addr << 1, c->adapter->name);
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index db25c3034c11..8d17cf613306 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,6 +62,7 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/usb/input.h>
 #endif
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 0be6f814f539..0b658dee05a4 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -29,7 +29,6 @@
 #include <linux/usb.h>
 #include <linux/spinlock.h>
 #include <linux/wait.h>
-#include <linux/smp_lock.h>
 #include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/mm.h>
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 6be845ccc7d7..9e3262c0ba37 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -48,6 +48,7 @@
 #include <linux/videodev2.h>
 #include <linux/version.h>
 #include <linux/mm.h>
+#include <linux/smp_lock.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/saa5246a.c b/drivers/media/video/saa5246a.c
index 155804b061e9..b624a4c01fdc 100644
--- a/drivers/media/video/saa5246a.c
+++ b/drivers/media/video/saa5246a.c
@@ -43,7 +43,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/videotext.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/saa5249.c b/drivers/media/video/saa5249.c
index 271d6e931b75..12835fb82c95 100644
--- a/drivers/media/video/saa5249.c
+++ b/drivers/media/video/saa5249.c
@@ -46,7 +46,6 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/videotext.h>
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index add1757f8930..296788c3bf0e 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 
 #include "saa7134-reg.h"
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index c8f05297d0f0..85ffc2cba039 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -31,6 +31,7 @@ static const char version[] = "0.24";
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/usb.h>
 #include "se401.h"
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 2e5937047278..4d6785e63455 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,6 +27,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 
 #include <linux/usb.h>
 #include <linux/mm.h>
diff --git a/drivers/media/video/stradis.c b/drivers/media/video/stradis.c
index 0eb313082c97..eaada39c76fd 100644
--- a/drivers/media/video/stradis.c
+++ b/drivers/media/video/stradis.c
@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/poll.h>
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 75f286f7a2e9..8b4e7dafce7b 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -62,6 +62,7 @@
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/errno.h>
 #include <linux/videodev.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index 8d73979596f9..45fce39ec9ad 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -43,6 +43,7 @@
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 90b58914f984..90d9b5c0e9a7 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,6 +50,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/utsname.h>
 #include <linux/highmem.h>
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 31eac66411d7..a7f1b69a7dab 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 3d7df32a3d87..bcdefb1bcb3d 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,6 +49,7 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d38a7acdb6ec..d019746551f3 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -114,7 +114,6 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
                 if (!left)
                         return;
                 addr += len;
-                flush_kernel_dcache_page(miter->page);
         } while (sg_dwiter_next(miter));
 }
 
@@ -142,9 +141,6 @@ void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t da
                         return;
         } else
                 sg_dwiter_write_slow(miter, data);
-
-        if (miter->length == miter->consumed)
-                flush_kernel_dcache_page(miter->page);
 }
 EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
 
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b34cb5f79eea..2e535a0ccd5e 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -173,6 +173,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
                 unsigned        segment;
                 unsigned        offset = (unsigned) off;
                 u8              *cp = bounce + 1;
+                int             sr;
 
                 *cp = AT25_WREN;
                 status = spi_write(at25->spi, cp, 1);
@@ -214,7 +215,6 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
                 timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
                 retries = 0;
                 do {
-                        int     sr;
 
                         sr = spi_w8r8(at25->spi, AT25_RDSR);
                         if (sr < 0 || (sr & AT25_SR_nRDY)) {
@@ -228,7 +228,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
                                 break;
                 } while (retries++ < 3 || time_before_eq(jiffies, timeout));
 
-                if (time_after(jiffies, timeout)) {
+                if ((sr < 0) || (sr & AT25_SR_nRDY)) {
                         dev_err(&at25->spi->dev,
                                 "write %d bytes offset %d, "
                                 "timeout after %u msecs\n",
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index fa2d93a9fb8d..aed609832bc2 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/io.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index eedbf9c32760..79689b10f937 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -24,7 +24,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb1af51..4e72964a7b43 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -278,7 +278,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
         if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
                 return -EINVAL;
 
-        sg_miter_start(&miter, data->sg, data->sg_len, 0);
+        sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
 
         cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
                 15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
@@ -307,7 +307,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
                         goto out;
         }
 out:
-        cb710_sg_miter_stop_writing(&miter);
+        sg_miter_stop(&miter);
         return err;
 }
 
@@ -322,7 +322,7 @@ static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
         if (unlikely(data->blocks > 1 && data->blksz & 15))
                 return -EINVAL;
 
-        sg_miter_start(&miter, data->sg, data->sg_len, 0);
+        sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
 
         cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
                 0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a4a696..bf98d7cc928a 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid)
         set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
         tasklet_schedule(&host->tasklet);
 
-        return IRQ_RETVAL(handled);;
+        return IRQ_RETVAL(handled);
 }
 
 static void imxmci_tasklet_fnc(unsigned long data)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a923ee27c09e..8741d0f5146a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -431,7 +431,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                                 clk = 255;
                         host->cclk = host->mclk / (2 * (clk + 1));
                 }
-                if (host->hw_designer == 0x80)
+                if (host->hw_designer == AMBA_VENDOR_ST)
                         clk |= MCI_FCEN; /* Bug fix in ST IP block */
                 clk |= MCI_CLK_ENABLE;
         }
@@ -444,7 +444,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                 break;
         case MMC_POWER_UP:
                 /* The ST version does not have this, fall through to POWER_ON */
-                if (host->hw_designer != 0x80) {
+                if (host->hw_designer != AMBA_VENDOR_ST) {
                         pwr |= MCI_PWR_UP;
                         break;
                 }
@@ -454,7 +454,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
         }
 
         if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
-                if (host->hw_designer != 0x80)
+                if (host->hw_designer != AMBA_VENDOR_ST)
                         pwr |= MCI_ROD;
                 else {
                         /*
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index b56d72ff06e9..34e23489811a 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -384,7 +384,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
                                 u16 val[2] = {0, 0};
                                 val[0] = mvsd_read(MVSD_FIFO);
                                 val[1] = mvsd_read(MVSD_FIFO);
-                                memcpy(p, &val, s);
+                                memcpy(p, ((void *)&val) + 4 - s, s);
                                 s = 0;
                                 intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
                         }
@@ -423,7 +423,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
                 if (s < 4) {
                         if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
                                 u16 val[2] = {0, 0};
-                                memcpy(&val, p, s);
+                                memcpy(((void *)&val) + 4 - s, p, s);
                                 mvsd_write(MVSD_FIFO, val[0]);
                                 mvsd_write(MVSD_FIFO, val[1]);
                                 s = 0;
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index d7d7109ef47e..e55ac792d68c 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -168,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 
         if (data->flags & MMC_DATA_READ) {
                 host->dma_dir = DMA_FROM_DEVICE;
-                dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+                dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
                 DRCMR(host->dma_drcmrtx) = 0;
                 DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
         } else {
                 host->dma_dir = DMA_TO_DEVICE;
-                dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+                dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
                 DRCMR(host->dma_drcmrrx) = 0;
                 DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
         }
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index d79fa55c3b89..908844327db0 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -158,6 +158,13 @@ static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
         return of_host->clock;
 }
 
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+        struct sdhci_of_host *of_host = sdhci_priv(host);
+
+        return of_host->clock / 256 / 16;
+}
+
 static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
 {
         struct sdhci_of_host *of_host = sdhci_priv(host);
@@ -184,6 +191,7 @@ static struct sdhci_of_data sdhci_esdhc = {
                 .set_clock = esdhc_set_clock,
                 .enable_dma = esdhc_enable_dma,
                 .get_max_clock = esdhc_get_max_clock,
+                .get_min_clock = esdhc_get_min_clock,
                 .get_timeout_clock = esdhc_get_timeout_clock,
         },
 };
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4ecab18..fc96f8cb9c0b 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -773,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
         }
 
         if (!(host->flags & SDHCI_REQ_USE_DMA)) {
-                sg_miter_start(&host->sg_miter,
-                        data->sg, data->sg_len, SG_MITER_ATOMIC);
+                int flags;
+
+                flags = SG_MITER_ATOMIC;
+                if (host->data->flags & MMC_DATA_READ)
+                        flags |= SG_MITER_TO_SG;
+                else
+                        flags |= SG_MITER_FROM_SG;
+                sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
                 host->blocks = data->blocks;
         }
 
@@ -1766,7 +1772,10 @@ int sdhci_add_host(struct sdhci_host *host)
          * Set host parameters.
          */
         mmc->ops = &sdhci_ops;
-        mmc->f_min = host->max_clk / 256;
+        if (host->ops->get_min_clock)
+                mmc->f_min = host->ops->get_min_clock(host);
+        else
+                mmc->f_min = host->max_clk / 256;
         mmc->f_max = host->max_clk;
         mmc->caps = MMC_CAP_SDIO_IRQ;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 831ddf7dcb49..c77e9ff30223 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -302,6 +302,7 @@ struct sdhci_ops {
 
         int             (*enable_dma)(struct sdhci_host *host);
         unsigned int    (*get_max_clock)(struct sdhci_host *host);
+        unsigned int    (*get_min_clock)(struct sdhci_host *host);
         unsigned int    (*get_timeout_clock)(struct sdhci_host *host);
 };
 
diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c
index 95aaac03f938..b5e478fa2661 100644
--- a/drivers/mtd/ubi/gluebi.c
+++ b/drivers/mtd/ubi/gluebi.c
@@ -332,6 +332,7 @@ static int gluebi_create(struct ubi_device_info *di,
         }
 
         gluebi->vol_id = vi->vol_id;
+        gluebi->ubi_num = vi->ubi_num;
         mtd->type = MTD_UBIVOLUME;
         if (!di->ro_mode)
                 mtd->flags = MTD_WRITEABLE;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index f60895ee0aeb..a423131b6171 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -781,7 +781,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
                         return -EINVAL;
                 }
 
-                image_seq = be32_to_cpu(ech->ec);
+                image_seq = be32_to_cpu(ech->image_seq);
                 if (!si->image_seq_set) {
                         ubi->image_seq = image_seq;
                         si->image_seq_set = 1;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 8ae72ec14456..0e2ba21d4441 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -908,6 +908,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
         .ndo_open               = rtl8139_open,
         .ndo_stop               = rtl8139_close,
         .ndo_get_stats          = rtl8139_get_stats,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_validate_addr      = eth_validate_addr,
         .ndo_set_mac_address    = rtl8139_set_mac_address,
         .ndo_start_xmit         = rtl8139_start_xmit,
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f053ba5c37ba..3ed49f1337c7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1729,6 +1729,13 @@ config KS8842
         help
           This platform driver is for Micrel KSZ8842 chip.
 
+config KS8851
+       tristate "Micrel KS8851 SPI"
+       depends on SPI
+       select MII
+       help
+         SPI driver for Micrel KS8851 SPI attached network chip.
+
 config VIA_RHINE
         tristate "VIA Rhine support"
         depends on NET_PCI && PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 4b58a59f211b..ead8cab3cfe1 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -88,6 +88,7 @@ obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_KS8842)    += ks8842.o
+obj-$(CONFIG_KS8851)    += ks8851.o
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
 obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 2895db13bfa4..c37ee9e6b67b 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -63,3 +63,11 @@ config IXP4XX_ETH
         help
           Say Y here if you want to use built-in Ethernet ports
           on IXP4xx processor.
+
+config W90P910_ETH
+        tristate "Nuvoton w90p910 Ethernet support"
+        depends on ARM && ARCH_W90X900
+        select PHYLIB
+        help
+          Say Y here if you want to use built-in Ethernet ports
+          on w90p910 processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 811a3ccd14c1..303171f589e6 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_ARM_KS8695_ETHER)  += ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)        += ep93xx_eth.o
 obj-$(CONFIG_IXP4XX_ETH)        += ixp4xx_eth.o
+obj-$(CONFIG_W90P910_ETH)       += w90p910_ether.o
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 2e7419a61191..5041d10bae9d 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1228,7 +1228,6 @@ static int at91ether_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver at91ether_driver = {
-        .probe          = at91ether_probe,
         .remove         = __devexit_p(at91ether_remove),
         .suspend        = at91ether_suspend,
         .resume         = at91ether_resume,
@@ -1240,7 +1239,7 @@ static struct platform_driver at91ether_driver = {
 
 static int __init at91ether_init(void)
 {
-        return platform_driver_register(&at91ether_driver);
+        return platform_driver_probe(&at91ether_driver, at91ether_probe);
 }
 
 static void __exit at91ether_exit(void)
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 6f42ad728915..3fe09876e76d 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1142,7 +1142,9 @@ static const struct net_device_ops ixp4xx_netdev_ops = {
         .ndo_start_xmit = eth_xmit,
         .ndo_set_multicast_list = eth_set_mcast_list,
         .ndo_do_ioctl = eth_ioctl,
-
+        .ndo_change_mtu = eth_change_mtu,
+        .ndo_set_mac_address = eth_mac_addr,
+        .ndo_validate_addr = eth_validate_addr,
 };
 
 static int __devinit eth_init_one(struct platform_device *pdev)
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
new file mode 100644
index 000000000000..616fb7985a34
--- /dev/null
+++ b/drivers/net/arm/w90p910_ether.c
@@ -0,0 +1,1105 @@
+/*
+ * Copyright (c) 2008-2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#define DRV_MODULE_NAME         "w90p910-emc"
+#define DRV_MODULE_VERSION      "0.1"
+
+/* Ethernet MAC Registers */
+#define REG_CAMCMR              0x00
+#define REG_CAMEN               0x04
+#define REG_CAMM_BASE           0x08
+#define REG_CAML_BASE           0x0c
+#define REG_TXDLSA              0x88
+#define REG_RXDLSA              0x8C
+#define REG_MCMDR               0x90
+#define REG_MIID                0x94
+#define REG_MIIDA               0x98
+#define REG_FFTCR               0x9C
+#define REG_TSDR                0xa0
+#define REG_RSDR                0xa4
+#define REG_DMARFC              0xa8
+#define REG_MIEN                0xac
+#define REG_MISTA               0xb0
+#define REG_CTXDSA              0xcc
+#define REG_CTXBSA              0xd0
+#define REG_CRXDSA              0xd4
+#define REG_CRXBSA              0xd8
+
+/* mac controller bit */
+#define MCMDR_RXON              0x01
+#define MCMDR_ACP               (0x01 << 3)
+#define MCMDR_SPCRC             (0x01 << 5)
+#define MCMDR_TXON              (0x01 << 8)
+#define MCMDR_FDUP              (0x01 << 18)
+#define MCMDR_ENMDC             (0x01 << 19)
+#define MCMDR_OPMOD             (0x01 << 20)
+#define SWR                     (0x01 << 24)
+
+/* cam command regiser */
+#define CAMCMR_AUP              0x01
+#define CAMCMR_AMP              (0x01 << 1)
+#define CAMCMR_ABP              (0x01 << 2)
+#define CAMCMR_CCAM             (0x01 << 3)
+#define CAMCMR_ECMP             (0x01 << 4)
+#define CAM0EN                  0x01
+
+/* mac mii controller bit */
+#define MDCCR                   (0x0a << 20)
+#define PHYAD                   (0x01 << 8)
+#define PHYWR                   (0x01 << 16)
+#define PHYBUSY                 (0x01 << 17)
+#define PHYPRESP                (0x01 << 18)
+#define CAM_ENTRY_SIZE          0x08
+
+/* rx and tx status */
+#define TXDS_TXCP               (0x01 << 19)
+#define RXDS_CRCE               (0x01 << 17)
+#define RXDS_PTLE               (0x01 << 19)
+#define RXDS_RXGD               (0x01 << 20)
+#define RXDS_ALIE               (0x01 << 21)
+#define RXDS_RP                 (0x01 << 22)
+
+/* mac interrupt status*/
+#define MISTA_EXDEF             (0x01 << 19)
+#define MISTA_TXBERR            (0x01 << 24)
+#define MISTA_TDU               (0x01 << 23)
+#define MISTA_RDU               (0x01 << 10)
+#define MISTA_RXBERR            (0x01 << 11)
+
+#define ENSTART                 0x01
+#define ENRXINTR                0x01
+#define ENRXGD                  (0x01 << 4)
+#define ENRXBERR                (0x01 << 11)
+#define ENTXINTR                (0x01 << 16)
+#define ENTXCP                  (0x01 << 18)
+#define ENTXABT                 (0x01 << 21)
+#define ENTXBERR                (0x01 << 24)
+#define ENMDC                   (0x01 << 19)
+#define PHYBUSY                 (0x01 << 17)
+#define MDCCR_VAL               0xa00000
+
+/* rx and tx owner bit */
+#define RX_OWEN_DMA             (0x01 << 31)
+#define RX_OWEN_CPU             (~(0x03 << 30))
+#define TX_OWEN_DMA             (0x01 << 31)
+#define TX_OWEN_CPU             (~(0x01 << 31))
+
+/* tx frame desc controller bit */
+#define MACTXINTEN              0x04
+#define CRCMODE                 0x02
+#define PADDINGMODE             0x01
+
+/* fftcr controller bit */
+#define TXTHD                   (0x03 << 8)
+#define BLENGTH                 (0x01 << 20)
+
+/* global setting for driver */
+#define RX_DESC_SIZE            50
+#define TX_DESC_SIZE            10
+#define MAX_RBUFF_SZ            0x600
+#define MAX_TBUFF_SZ            0x600
+#define TX_TIMEOUT              50
+#define DELAY                   1000
+#define CAM0                    0x0
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg);
+
+struct w90p910_rxbd {
+        unsigned int sl;
+        unsigned int buffer;
+        unsigned int reserved;
+        unsigned int next;
+};
+
+struct w90p910_txbd {
+        unsigned int mode;
+        unsigned int buffer;
+        unsigned int sl;
+        unsigned int next;
+};
+
+struct recv_pdesc {
+        struct w90p910_rxbd desclist[RX_DESC_SIZE];
+        char recv_buf[RX_DESC_SIZE][MAX_RBUFF_SZ];
+};
+
+struct tran_pdesc {
+        struct w90p910_txbd desclist[TX_DESC_SIZE];
+        char tran_buf[RX_DESC_SIZE][MAX_TBUFF_SZ];
+};
+
+struct  w90p910_ether {
+        struct recv_pdesc *rdesc;
+        struct recv_pdesc *rdesc_phys;
+        struct tran_pdesc *tdesc;
+        struct tran_pdesc *tdesc_phys;
+        struct net_device_stats stats;
+        struct platform_device *pdev;
+        struct sk_buff *skb;
+        struct clk *clk;
+        struct clk *rmiiclk;
+        struct mii_if_info mii;
+        struct timer_list check_timer;
+        void __iomem *reg;
+        unsigned int rxirq;
+        unsigned int txirq;
+        unsigned int cur_tx;
+        unsigned int cur_rx;
+        unsigned int finish_tx;
+        unsigned int rx_packets;
+        unsigned int rx_bytes;
+        unsigned int start_tx_ptr;
+        unsigned int start_rx_ptr;
+        unsigned int linkflag;
+        spinlock_t lock;
+};
+
+static void update_linkspeed_register(struct net_device *dev,
+                                unsigned int speed, unsigned int duplex)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = __raw_readl(ether->reg + REG_MCMDR);
+
+        if (speed == SPEED_100) {
+                /* 100 full/half duplex */
+                if (duplex == DUPLEX_FULL) {
+                        val |= (MCMDR_OPMOD | MCMDR_FDUP);
+                } else {
+                        val |= MCMDR_OPMOD;
+                        val &= ~MCMDR_FDUP;
+                }
+        } else {
+                /* 10 full/half duplex */
+                if (duplex == DUPLEX_FULL) {
+                        val |= MCMDR_FDUP;
+                        val &= ~MCMDR_OPMOD;
+                } else {
+                        val &= ~(MCMDR_FDUP | MCMDR_OPMOD);
+                }
+        }
+
+        __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void update_linkspeed(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        struct platform_device *pdev;
+        unsigned int bmsr, bmcr, lpa, speed, duplex;
+
+        pdev = ether->pdev;
+
+        if (!mii_link_ok(&ether->mii)) {
+                ether->linkflag = 0x0;
+                netif_carrier_off(dev);
+                dev_warn(&pdev->dev, "%s: Link down.\n", dev->name);
+                return;
+        }
+
+        if (ether->linkflag == 1)
+                return;
+
+        bmsr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMSR);
+        bmcr = w90p910_mdio_read(dev, ether->mii.phy_id, MII_BMCR);
+
+        if (bmcr & BMCR_ANENABLE) {
+                if (!(bmsr & BMSR_ANEGCOMPLETE))
+                        return;
+
+                lpa = w90p910_mdio_read(dev, ether->mii.phy_id, MII_LPA);
+
+                if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF))
+                        speed = SPEED_100;
+                else
+                        speed = SPEED_10;
+
+                if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL))
+                        duplex = DUPLEX_FULL;
+                else
+                        duplex = DUPLEX_HALF;
+
+        } else {
+                speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
+                duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+        }
+
+        update_linkspeed_register(dev, speed, duplex);
+
+        dev_info(&pdev->dev, "%s: Link now %i-%s\n", dev->name, speed,
+                        (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
+        ether->linkflag = 0x01;
+
+        netif_carrier_on(dev);
+}
+
+static void w90p910_check_link(unsigned long dev_id)
+{
+        struct net_device *dev = (struct net_device *) dev_id;
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        update_linkspeed(dev);
+        mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
+}
+
+static void w90p910_write_cam(struct net_device *dev,
+                                unsigned int x, unsigned char *pval)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int msw, lsw;
+
+        msw = (pval[0] << 24) | (pval[1] << 16) | (pval[2] << 8) | pval[3];
+
+        lsw = (pval[4] << 24) | (pval[5] << 16);
+
+        __raw_writel(lsw, ether->reg + REG_CAML_BASE + x * CAM_ENTRY_SIZE);
+        __raw_writel(msw, ether->reg + REG_CAMM_BASE + x * CAM_ENTRY_SIZE);
+}
+
+static void w90p910_init_desc(struct net_device *dev)
+{
+        struct w90p910_ether *ether;
+        struct w90p910_txbd  *tdesc, *tdesc_phys;
+        struct w90p910_rxbd  *rdesc, *rdesc_phys;
+        unsigned int i, j;
+
+        ether = netdev_priv(dev);
+
+        ether->tdesc = (struct tran_pdesc *)
+                        dma_alloc_coherent(NULL, sizeof(struct tran_pdesc),
+                                (dma_addr_t *) &ether->tdesc_phys, GFP_KERNEL);
+
+        ether->rdesc = (struct recv_pdesc *)
+                        dma_alloc_coherent(NULL, sizeof(struct recv_pdesc),
+                                (dma_addr_t *) &ether->rdesc_phys, GFP_KERNEL);
+
+        for (i = 0; i < TX_DESC_SIZE; i++) {
+                tdesc = &(ether->tdesc->desclist[i]);
+
+                j = ((i + 1) / TX_DESC_SIZE);
+
+                if (j != 0) {
+                        tdesc_phys = &(ether->tdesc_phys->desclist[0]);
+                        ether->start_tx_ptr = (unsigned int)tdesc_phys;
+                        tdesc->next = (unsigned int)ether->start_tx_ptr;
+                } else {
+                        tdesc_phys = &(ether->tdesc_phys->desclist[i+1]);
+                        tdesc->next = (unsigned int)tdesc_phys;
+                }
+
+                tdesc->buffer = (unsigned int)ether->tdesc_phys->tran_buf[i];
+                tdesc->sl = 0;
+                tdesc->mode = 0;
+        }
+
+        for (i = 0; i < RX_DESC_SIZE; i++) {
+                rdesc = &(ether->rdesc->desclist[i]);
+
+                j = ((i + 1) / RX_DESC_SIZE);
+
+                if (j != 0) {
+                        rdesc_phys = &(ether->rdesc_phys->desclist[0]);
+                        ether->start_rx_ptr = (unsigned int)rdesc_phys;
+                        rdesc->next = (unsigned int)ether->start_rx_ptr;
+                } else {
+                        rdesc_phys = &(ether->rdesc_phys->desclist[i+1]);
+                        rdesc->next = (unsigned int)rdesc_phys;
+                }
+
+                rdesc->sl = RX_OWEN_DMA;
+                rdesc->buffer = (unsigned int)ether->rdesc_phys->recv_buf[i];
+          }
+}
+
+static void w90p910_set_fifo_threshold(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = TXTHD | BLENGTH;
+        __raw_writel(val, ether->reg + REG_FFTCR);
+}
+
+static void w90p910_return_default_idle(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = __raw_readl(ether->reg + REG_MCMDR);
+        val |= SWR;
+        __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_trigger_rx(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        __raw_writel(ENSTART, ether->reg + REG_RSDR);
+}
+
+static void w90p910_trigger_tx(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        __raw_writel(ENSTART, ether->reg + REG_TSDR);
+}
+
+static void w90p910_enable_mac_interrupt(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = ENTXINTR | ENRXINTR | ENRXGD | ENTXCP;
+        val |= ENTXBERR | ENRXBERR | ENTXABT;
+
+        __raw_writel(val, ether->reg + REG_MIEN);
+}
+
+static void w90p910_get_and_clear_int(struct net_device *dev,
+                                                        unsigned int *val)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        *val = __raw_readl(ether->reg + REG_MISTA);
+        __raw_writel(*val, ether->reg + REG_MISTA);
+}
+
+static void w90p910_set_global_maccmd(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = __raw_readl(ether->reg + REG_MCMDR);
+        val |= MCMDR_SPCRC | MCMDR_ENMDC | MCMDR_ACP | ENMDC;
+        __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_cam(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+        val = __raw_readl(ether->reg + REG_CAMEN);
+        val |= CAM0EN;
+        __raw_writel(val, ether->reg + REG_CAMEN);
+}
+
+static void w90p910_enable_cam_command(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = CAMCMR_ECMP | CAMCMR_ABP | CAMCMR_AMP;
+        __raw_writel(val, ether->reg + REG_CAMCMR);
+}
+
+static void w90p910_enable_tx(struct net_device *dev, unsigned int enable)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = __raw_readl(ether->reg + REG_MCMDR);
+
+        if (enable)
+                val |= MCMDR_TXON;
+        else
+                val &= ~MCMDR_TXON;
+
+        __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_enable_rx(struct net_device *dev, unsigned int enable)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        unsigned int val;
+
+        val = __raw_readl(ether->reg + REG_MCMDR);
+
+        if (enable)
+                val |= MCMDR_RXON;
+        else
+                val &= ~MCMDR_RXON;
+
+        __raw_writel(val, ether->reg + REG_MCMDR);
+}
+
+static void w90p910_set_curdest(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        __raw_writel(ether->start_rx_ptr, ether->reg + REG_RXDLSA);
+        __raw_writel(ether->start_tx_ptr, ether->reg + REG_TXDLSA);
+}
+
+static void w90p910_reset_mac(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        spin_lock(&ether->lock);
+
+        w90p910_enable_tx(dev, 0);
+        w90p910_enable_rx(dev, 0);
+        w90p910_set_fifo_threshold(dev);
+        w90p910_return_default_idle(dev);
+
+        if (!netif_queue_stopped(dev))
+                netif_stop_queue(dev);
+
+        w90p910_init_desc(dev);
+
+        dev->trans_start = jiffies;
+        ether->cur_tx = 0x0;
+        ether->finish_tx = 0x0;
+        ether->cur_rx = 0x0;
+
+        w90p910_set_curdest(dev);
+        w90p910_enable_cam(dev);
+        w90p910_enable_cam_command(dev);
+        w90p910_enable_mac_interrupt(dev);
+        w90p910_enable_tx(dev, 1);
+        w90p910_enable_rx(dev, 1);
+        w90p910_trigger_tx(dev);
+        w90p910_trigger_rx(dev);
+
+        dev->trans_start = jiffies;
+
+        if (netif_queue_stopped(dev))
+                netif_wake_queue(dev);
+
+        spin_unlock(&ether->lock);
+}
+
+static void w90p910_mdio_write(struct net_device *dev,
+                                        int phy_id, int reg, int data)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        struct platform_device *pdev;
+        unsigned int val, i;
+
+        pdev = ether->pdev;
+
+        __raw_writel(data, ether->reg + REG_MIID);
+
+        val = (phy_id << 0x08) | reg;
+        val |= PHYBUSY | PHYWR | MDCCR_VAL;
+        __raw_writel(val, ether->reg + REG_MIIDA);
+
+        for (i = 0; i < DELAY; i++) {
+                if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+                        break;
+        }
+
+        if (i == DELAY)
+                dev_warn(&pdev->dev, "mdio write timed out\n");
+}
+
+static int w90p910_mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        struct platform_device *pdev;
+        unsigned int val, i, data;
+
+        pdev = ether->pdev;
+
+        val = (phy_id << 0x08) | reg;
+        val |= PHYBUSY | MDCCR_VAL;
+        __raw_writel(val, ether->reg + REG_MIIDA);
+
+        for (i = 0; i < DELAY; i++) {
+                if ((__raw_readl(ether->reg + REG_MIIDA) & PHYBUSY) == 0)
+                        break;
+        }
+
+        if (i == DELAY) {
+                dev_warn(&pdev->dev, "mdio read timed out\n");
+                data = 0xffff;
+        } else {
+                data = __raw_readl(ether->reg + REG_MIID);
+        }
+
+        return data;
+}
+
+static int set_mac_address(struct net_device *dev, void *addr)
+{
+        struct sockaddr *address = addr;
+
+        if (!is_valid_ether_addr(address->sa_data))
+                return -EADDRNOTAVAIL;
+
+        memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
+        w90p910_write_cam(dev, CAM0, dev->dev_addr);
+
+        return 0;
+}
+
+static int w90p910_ether_close(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        dma_free_writecombine(NULL, sizeof(struct w90p910_rxbd),
+                                ether->rdesc, (dma_addr_t)ether->rdesc_phys);
+        dma_free_writecombine(NULL, sizeof(struct w90p910_txbd),
+                                ether->tdesc, (dma_addr_t)ether->tdesc_phys);
+
+        netif_stop_queue(dev);
+
+        del_timer_sync(&ether->check_timer);
+        clk_disable(ether->rmiiclk);
+        clk_disable(ether->clk);
+
+        free_irq(ether->txirq, dev);
+        free_irq(ether->rxirq, dev);
+
+        return 0;
+}
+
+static struct net_device_stats *w90p910_ether_stats(struct net_device *dev)
+{
+        struct w90p910_ether *ether;
+
+        ether = netdev_priv(dev);
+
+        return &ether->stats;
+}
+
+static int w90p910_send_frame(struct net_device *dev,
+                                        unsigned char *data, int length)
+{
+        struct w90p910_ether *ether;
+        struct w90p910_txbd *txbd;
+        struct platform_device *pdev;
+        unsigned char *buffer;
+
+        ether = netdev_priv(dev);
+        pdev = ether->pdev;
+
+        txbd = &ether->tdesc->desclist[ether->cur_tx];
+        buffer = ether->tdesc->tran_buf[ether->cur_tx];
+        if (length > 1514) {
+                dev_err(&pdev->dev, "send data %d bytes, check it\n", length);
+                length = 1514;
+        }
+
+        txbd->sl = length & 0xFFFF;
+
+        memcpy(buffer, data, length);
+
+        txbd->mode = TX_OWEN_DMA | PADDINGMODE | CRCMODE | MACTXINTEN;
+
+        w90p910_enable_tx(dev, 1);
+
+        w90p910_trigger_tx(dev);
+
+        ether->cur_tx = (ether->cur_tx+1) % TX_DESC_SIZE;
+        txbd = &ether->tdesc->desclist[ether->cur_tx];
+
+        dev->trans_start = jiffies;
+
+        if (txbd->mode & TX_OWEN_DMA)
+                netif_stop_queue(dev);
+
+        return 0;
+}
+
+static int w90p910_ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        if (!(w90p910_send_frame(dev, skb->data, skb->len))) {
+                ether->skb = skb;
+                dev_kfree_skb_irq(skb);
+                return 0;
+        }
+        return -1;
+}
+
+static irqreturn_t w90p910_tx_interrupt(int irq, void *dev_id)
+{
+        struct w90p910_ether *ether;
+        struct w90p910_txbd  *txbd;
+        struct platform_device *pdev;
+        struct tran_pdesc *tran_pdesc;
+        struct net_device *dev;
+        unsigned int cur_entry, entry, status;
+
+        dev = (struct net_device *)dev_id;
+        ether = netdev_priv(dev);
+        pdev = ether->pdev;
+
+        spin_lock(&ether->lock);
+
+        w90p910_get_and_clear_int(dev, &status);
+
+        cur_entry = __raw_readl(ether->reg + REG_CTXDSA);
+
+        tran_pdesc = ether->tdesc_phys;
+        entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+
+        while (entry != cur_entry) {
+                txbd = &ether->tdesc->desclist[ether->finish_tx];
+
+                ether->finish_tx = (ether->finish_tx + 1) % TX_DESC_SIZE;
+
+                if (txbd->sl & TXDS_TXCP) {
+                        ether->stats.tx_packets++;
+                        ether->stats.tx_bytes += txbd->sl & 0xFFFF;
+                } else {
+                        ether->stats.tx_errors++;
+                }
+
+                txbd->sl = 0x0;
+                txbd->mode = 0x0;
+
+                if (netif_queue_stopped(dev))
+                        netif_wake_queue(dev);
+
+                entry = (unsigned int)(&tran_pdesc->desclist[ether->finish_tx]);
+        }
+
+        if (status & MISTA_EXDEF) {
+                dev_err(&pdev->dev, "emc defer exceed interrupt\n");
+        } else if (status & MISTA_TXBERR) {
+                        dev_err(&pdev->dev, "emc bus error interrupt\n");
+                        w90p910_reset_mac(dev);
+                } else if (status & MISTA_TDU) {
+                                if (netif_queue_stopped(dev))
+                                        netif_wake_queue(dev);
+                        }
+
+        spin_unlock(&ether->lock);
+
+        return IRQ_HANDLED;
+}
+
+static void netdev_rx(struct net_device *dev)
+{
+        struct w90p910_ether *ether;
+        struct w90p910_rxbd *rxbd;
+        struct platform_device *pdev;
+        struct recv_pdesc *rdesc_phys;
+        struct sk_buff *skb;
+        unsigned char *data;
+        unsigned int length, status, val, entry;
+
+        ether = netdev_priv(dev);
+        pdev = ether->pdev;
+        rdesc_phys = ether->rdesc_phys;
+
+        rxbd = &ether->rdesc->desclist[ether->cur_rx];
+
+        do {
+                val = __raw_readl(ether->reg + REG_CRXDSA);
+                entry = (unsigned int)&rdesc_phys->desclist[ether->cur_rx];
+
+                if (val == entry)
+                        break;
+
+                status = rxbd->sl;
+                length = status & 0xFFFF;
+
+                if (status & RXDS_RXGD) {
+                        data = ether->rdesc->recv_buf[ether->cur_rx];
+                        skb = dev_alloc_skb(length+2);
+                        if (!skb) {
+                                dev_err(&pdev->dev, "get skb buffer error\n");
+                                ether->stats.rx_dropped++;
+                                return;
+                        }
+
+                        skb->dev = dev;
+                        skb_reserve(skb, 2);
+                        skb_put(skb, length);
+                        skb_copy_to_linear_data(skb, data, length);
+                        skb->protocol = eth_type_trans(skb, dev);
+                        ether->stats.rx_packets++;
+                        ether->stats.rx_bytes += length;
+                        netif_rx(skb);
+                } else {
+                        ether->stats.rx_errors++;
+
+                        if (status & RXDS_RP) {
+                                dev_err(&pdev->dev, "rx runt err\n");
+                                ether->stats.rx_length_errors++;
+                        } else if (status & RXDS_CRCE) {
+                                        dev_err(&pdev->dev, "rx crc err\n");
+                                        ether->stats.rx_crc_errors++;
+                                }
+
+                        if (status & RXDS_ALIE) {
+                                dev_err(&pdev->dev, "rx aligment err\n");
+                                ether->stats.rx_frame_errors++;
+                        } else if (status & RXDS_PTLE) {
+                                        dev_err(&pdev->dev, "rx longer err\n");
+                                        ether->stats.rx_over_errors++;
+                                }
+                        }
+
+                rxbd->sl = RX_OWEN_DMA;
+                rxbd->reserved = 0x0;
+                ether->cur_rx = (ether->cur_rx+1) % RX_DESC_SIZE;
+                rxbd = &ether->rdesc->desclist[ether->cur_rx];
+
+                dev->last_rx = jiffies;
+        } while (1);
+}
+
+static irqreturn_t w90p910_rx_interrupt(int irq, void *dev_id)
+{
+        struct net_device *dev;
+        struct w90p910_ether  *ether;
+        struct platform_device *pdev;
+        unsigned int status;
+
+        dev = (struct net_device *)dev_id;
+        ether = netdev_priv(dev);
+        pdev = ether->pdev;
+
+        spin_lock(&ether->lock);
+
+        w90p910_get_and_clear_int(dev, &status);
+
+        if (status & MISTA_RDU) {
+                netdev_rx(dev);
+
+                w90p910_trigger_rx(dev);
+
+                spin_unlock(&ether->lock);
+                return IRQ_HANDLED;
+        } else if (status & MISTA_RXBERR) {
+                        dev_err(&pdev->dev, "emc rx bus error\n");
+                        w90p910_reset_mac(dev);
+                }
+
+        netdev_rx(dev);
+        spin_unlock(&ether->lock);
+        return IRQ_HANDLED;
+}
+
+static int w90p910_ether_open(struct net_device *dev)
+{
+        struct w90p910_ether *ether;
+        struct platform_device *pdev;
+
+        ether = netdev_priv(dev);
+        pdev = ether->pdev;
+
+        w90p910_reset_mac(dev);
+        w90p910_set_fifo_threshold(dev);
+        w90p910_set_curdest(dev);
+        w90p910_enable_cam(dev);
+        w90p910_enable_cam_command(dev);
+        w90p910_enable_mac_interrupt(dev);
+        w90p910_set_global_maccmd(dev);
+        w90p910_enable_rx(dev, 1);
+
+        ether->rx_packets = 0x0;
+        ether->rx_bytes = 0x0;
+
+        if (request_irq(ether->txirq, w90p910_tx_interrupt,
+                                                0x0, pdev->name, dev)) {
+                dev_err(&pdev->dev, "register irq tx failed\n");
+                return -EAGAIN;
+        }
+
+        if (request_irq(ether->rxirq, w90p910_rx_interrupt,
+                                                0x0, pdev->name, dev)) {
+                dev_err(&pdev->dev, "register irq rx failed\n");
+                return -EAGAIN;
+        }
+
+        mod_timer(&ether->check_timer, jiffies + msecs_to_jiffies(1000));
+        netif_start_queue(dev);
+        w90p910_trigger_rx(dev);
+
+        dev_info(&pdev->dev, "%s is OPENED\n", dev->name);
+
+        return 0;
+}
+
+static void w90p910_ether_set_multicast_list(struct net_device *dev)
+{
+        struct w90p910_ether *ether;
+        unsigned int rx_mode;
+
+        ether = netdev_priv(dev);
+
+        if (dev->flags & IFF_PROMISC)
+                rx_mode = CAMCMR_AUP | CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+        else if ((dev->flags & IFF_ALLMULTI) || dev->mc_list)
+                        rx_mode = CAMCMR_AMP | CAMCMR_ABP | CAMCMR_ECMP;
+                else
+                                rx_mode = CAMCMR_ECMP | CAMCMR_ABP;
+        __raw_writel(rx_mode, ether->reg + REG_CAMCMR);
+}
+
+static int w90p910_ether_ioctl(struct net_device *dev,
+                                                struct ifreq *ifr, int cmd)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        struct mii_ioctl_data *data = if_mii(ifr);
+
+        return generic_mii_ioctl(&ether->mii, data, cmd, NULL);
+}
+
+static void w90p910_get_drvinfo(struct net_device *dev,
+                                        struct ethtool_drvinfo *info)
+{
+        strcpy(info->driver, DRV_MODULE_NAME);
+        strcpy(info->version, DRV_MODULE_VERSION);
+}
+
+static int w90p910_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        return mii_ethtool_gset(&ether->mii, cmd);
+}
+
+static int w90p910_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        return mii_ethtool_sset(&ether->mii, cmd);
+}
+
+static int w90p910_nway_reset(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        return mii_nway_restart(&ether->mii);
+}
+
+static u32 w90p910_get_link(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        return mii_link_ok(&ether->mii);
+}
+
+static const struct ethtool_ops w90p910_ether_ethtool_ops = {
+        .get_settings   = w90p910_get_settings,
+        .set_settings   = w90p910_set_settings,
+        .get_drvinfo    = w90p910_get_drvinfo,
+        .nway_reset     = w90p910_nway_reset,
+        .get_link       = w90p910_get_link,
+};
+
+static const struct net_device_ops w90p910_ether_netdev_ops = {
+        .ndo_open               = w90p910_ether_open,
+        .ndo_stop               = w90p910_ether_close,
+        .ndo_start_xmit         = w90p910_ether_start_xmit,
+        .ndo_get_stats          = w90p910_ether_stats,
+        .ndo_set_multicast_list = w90p910_ether_set_multicast_list,
+        .ndo_set_mac_address    = set_mac_address,
+        .ndo_do_ioctl           = w90p910_ether_ioctl,
+        .ndo_validate_addr      = eth_validate_addr,
+        .ndo_change_mtu         = eth_change_mtu,
+};
+
+static void __init get_mac_address(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+        struct platform_device *pdev;
+        char addr[6];
+
+        pdev = ether->pdev;
+
+        addr[0] = 0x00;
+        addr[1] = 0x02;
+        addr[2] = 0xac;
+        addr[3] = 0x55;
+        addr[4] = 0x88;
+        addr[5] = 0xa8;
+
+        if (is_valid_ether_addr(addr))
+                memcpy(dev->dev_addr, &addr, 0x06);
+        else
+                dev_err(&pdev->dev, "invalid mac address\n");
+}
+
+static int w90p910_ether_setup(struct net_device *dev)
+{
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        ether_setup(dev);
+        dev->netdev_ops = &w90p910_ether_netdev_ops;
+        dev->ethtool_ops = &w90p910_ether_ethtool_ops;
+
+        dev->tx_queue_len = 16;
+        dev->dma = 0x0;
+        dev->watchdog_timeo = TX_TIMEOUT;
+
+        get_mac_address(dev);
+
+        spin_lock_init(&ether->lock);
+
+        ether->cur_tx = 0x0;
+        ether->cur_rx = 0x0;
+        ether->finish_tx = 0x0;
+        ether->linkflag = 0x0;
+        ether->mii.phy_id = 0x01;
+        ether->mii.phy_id_mask = 0x1f;
+        ether->mii.reg_num_mask = 0x1f;
+        ether->mii.dev = dev;
+        ether->mii.mdio_read = w90p910_mdio_read;
+        ether->mii.mdio_write = w90p910_mdio_write;
+
+        setup_timer(&ether->check_timer, w90p910_check_link,
+                                                (unsigned long)dev);
+
+        return 0;
+}
+
+static int __devinit w90p910_ether_probe(struct platform_device *pdev)
+{
+        struct w90p910_ether *ether;
+        struct net_device *dev;
+        struct resource *res;
+        int error;
+
+        dev = alloc_etherdev(sizeof(struct w90p910_ether));
+        if (!dev)
+                return -ENOMEM;
+
+        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+        if (res == NULL) {
+                dev_err(&pdev->dev, "failed to get I/O memory\n");
+                error = -ENXIO;
+                goto failed_free;
+        }
+
+        res = request_mem_region(res->start, resource_size(res), pdev->name);
+        if (res == NULL) {
+                dev_err(&pdev->dev, "failed to request I/O memory\n");
+                error = -EBUSY;
+                goto failed_free;
+        }
+
+        ether = netdev_priv(dev);
+
+        ether->reg = ioremap(res->start, resource_size(res));
+        if (ether->reg == NULL) {
+                dev_err(&pdev->dev, "failed to remap I/O memory\n");
+                error = -ENXIO;
+                goto failed_free_mem;
+        }
+
+        ether->txirq = platform_get_irq(pdev, 0);
+        if (ether->txirq < 0) {
+                dev_err(&pdev->dev, "failed to get ether tx irq\n");
+                error = -ENXIO;
+                goto failed_free_io;
+        }
+
+        ether->rxirq = platform_get_irq(pdev, 1);
+        if (ether->rxirq < 0) {
+                dev_err(&pdev->dev, "failed to get ether rx irq\n");
+                error = -ENXIO;
+                goto failed_free_txirq;
+        }
+
+        platform_set_drvdata(pdev, dev);
+
+        ether->clk = clk_get(&pdev->dev, NULL);
+        if (IS_ERR(ether->clk)) {
+                dev_err(&pdev->dev, "failed to get ether clock\n");
+                error = PTR_ERR(ether->clk);
+                goto failed_free_rxirq;
+        }
+
+        ether->rmiiclk = clk_get(&pdev->dev, "RMII");
+        if (IS_ERR(ether->rmiiclk)) {
+                dev_err(&pdev->dev, "failed to get ether clock\n");
+                error = PTR_ERR(ether->rmiiclk);
+                goto failed_put_clk;
+        }
+
+        ether->pdev = pdev;
+
+        w90p910_ether_setup(dev);
+
+        error = register_netdev(dev);
+        if (error != 0) {
+                dev_err(&pdev->dev, "Regiter EMC w90p910 FAILED\n");
+                error = -ENODEV;
+                goto failed_put_rmiiclk;
+        }
+
+        return 0;
+failed_put_rmiiclk:
+        clk_put(ether->rmiiclk);
+failed_put_clk:
+        clk_put(ether->clk);
+failed_free_rxirq:
+        free_irq(ether->rxirq, pdev);
+        platform_set_drvdata(pdev, NULL);
+failed_free_txirq:
+        free_irq(ether->txirq, pdev);
+failed_free_io:
+        iounmap(ether->reg);
+failed_free_mem:
+        release_mem_region(res->start, resource_size(res));
+failed_free:
+        free_netdev(dev);
+        return error;
+}
+
+static int __devexit w90p910_ether_remove(struct platform_device *pdev)
+{
+        struct net_device *dev = platform_get_drvdata(pdev);
+        struct w90p910_ether *ether = netdev_priv(dev);
+
+        unregister_netdev(dev);
+        clk_put(ether->rmiiclk);
+        clk_put(ether->clk);
+        del_timer_sync(&ether->check_timer);
+        platform_set_drvdata(pdev, NULL);
+        free_netdev(dev);
+        return 0;
+}
+
+static struct platform_driver w90p910_ether_driver = {
+        .probe          = w90p910_ether_probe,
+        .remove         = __devexit_p(w90p910_ether_remove),
+        .driver         = {
+                .name   = "w90p910-emc",
+                .owner  = THIS_MODULE,
+        },
+};
+
+static int __init w90p910_ether_init(void)
+{
+        return platform_driver_register(&w90p910_ether_driver);
+}
+
+static void __exit w90p910_ether_exit(void)
+{
+        platform_driver_unregister(&w90p910_ether_driver);
+}
+
+module_init(w90p910_ether_init);
+module_exit(w90p910_ether_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 MAC driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-emc");
+
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 18b566ad4fd1..cf30e278f182 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -318,7 +318,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
                                 pos3 = mca_read_stored_pos( slot, 3 );
                                 pos4 = mca_read_stored_pos( slot, 4 );
 
-                                for (l_i = 0; l_i < 0x09; l_i++)
+                                for (l_i = 0; l_i < 8; l_i++)
                                         if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
                                                 break;
                                 ioaddr = at1700_mca_probe_list[l_i];
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index e1658ef3fcdf..2a1120ad2e74 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -188,14 +188,14 @@ struct atl1c_tpd_ext_desc {
 #define RRS_HDS_TYPE_DATA       2
 
 #define RRS_IS_NO_HDS_TYPE(flag) \
-        (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == 0)
+        ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == 0)
 
 #define RRS_IS_HDS_HEAD(flag) \
-        (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+        ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
                         RRS_HDS_TYPE_HEAD)
 
 #define RRS_IS_HDS_DATA(flag) \
-        (((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK == \
+        ((((flag) >> (RRS_HDS_TYPE_SHIFT)) & RRS_HDS_TYPE_MASK) == \
                         RRS_HDS_TYPE_DATA)
 
 /* rrs word 3 bit 0:31 */
@@ -245,7 +245,7 @@ struct atl1c_tpd_ext_desc {
 #define RRS_PACKET_TYPE_802_3   1
 #define RRS_PACKET_TYPE_ETH     0
 #define RRS_PACKET_IS_ETH(word) \
-        (((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK == \
+        ((((word) >> RRS_PACKET_TYPE_SHIFT) & RRS_PACKET_TYPE_MASK) == \
                         RRS_PACKET_TYPE_ETH)
 #define RRS_RXD_IS_VALID(word) \
         ((((word) >> RRS_RXD_UPDATED_SHIFT) & RRS_RXD_UPDATED_MASK) == 1)
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index cd547a205fb9..a383122679de 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1689,7 +1689,7 @@ static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter, u8 que,
                 if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
                         rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
                                 RRS_RX_RFD_CNT_MASK;
-                        if (unlikely(rfd_num) != 1)
+                        if (unlikely(rfd_num != 1))
                                 /* TODO support mul rfd*/
                                 if (netif_msg_rx_err(adapter))
                                         dev_warn(&pdev->dev,
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index c734b1983ec1..204db961029e 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -2071,7 +2071,7 @@ static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
         if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
                 return -EOPNOTSUPP;
 
-        if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
+        if (wol->wolopts & (WAKE_UCAST | WAKE_BCAST | WAKE_MCAST))
                 return -EOPNOTSUPP;
 
         /* these settings will always override what we currently have */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index c43f6a119295..dea3155688bb 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -667,7 +667,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
         struct be_queue_info *rxq = &adapter->rx_obj.q;
         struct be_rx_page_info *page_info;
         u16 rxq_idx, i, num_rcvd, j;
-        u32 pktsize, hdr_len, curr_frag_len;
+        u32 pktsize, hdr_len, curr_frag_len, size;
         u8 *start;
 
         rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -708,12 +708,13 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
         }
 
         /* More frags present for this completion */
-        pktsize -= curr_frag_len; /* account for above copied frag */
+        size = pktsize;
         for (i = 1, j = 0; i < num_rcvd; i++) {
+                size -= curr_frag_len;
                 index_inc(&rxq_idx, rxq->len);
                 page_info = get_rx_page_info(adapter, rxq_idx);
 
-                curr_frag_len = min(pktsize, rx_frag_size);
+                curr_frag_len = min(size, rx_frag_size);
 
                 /* Coalesce all frags from the same physical page in one slot */
                 if (page_info->page_offset == 0) {
@@ -731,7 +732,6 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
                 skb_shinfo(skb)->frags[j].size += curr_frag_len;
                 skb->len += curr_frag_len;
                 skb->data_len += curr_frag_len;
-                pktsize -= curr_frag_len;
 
                 memset(page_info, 0, sizeof(*page_info));
         }
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index ed648acef7cf..2ee581a2cdec 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -4212,13 +4212,14 @@ static void bnx2x_turn_off_sf(struct bnx2x *bp, u8 port)
 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
                               u8 *version, u16 len)
 {
-        struct bnx2x *bp = params->bp;
+        struct bnx2x *bp;
         u32 ext_phy_type = 0;
         u32 spirom_ver = 0;
         u8 status = 0 ;
 
         if (version == NULL || params == NULL)
                 return -EINVAL;
+        bp = params->bp;
 
         spirom_ver = REG_RD(bp, params->shmem_base +
                    offsetof(struct shmem_region,
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d927f71af8a3..aa1be1feceed 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1459,8 +1459,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
          * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
          */
         if (bond->slave_cnt == 0) {
-                if (slave_dev->type != ARPHRD_ETHER)
-                        bond_setup_by_slave(bond_dev, slave_dev);
+                if (bond_dev->type != slave_dev->type) {
+                        dev_close(bond_dev);
+                        pr_debug("%s: change device type from %d to %d\n",
+                                bond_dev->name, bond_dev->type, slave_dev->type);
+                        if (slave_dev->type != ARPHRD_ETHER)
+                                bond_setup_by_slave(bond_dev, slave_dev);
+                        else
+                                ether_setup(bond_dev);
+                        dev_open(bond_dev);
+                }
         } else if (bond_dev->type != slave_dev->type) {
                 pr_err(DRV_NAME ": %s ether type (%d) is different "
                         "from other slaves (%d), can not enslave it.\n",
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 574daddc21bf..9e4283aff828 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -346,7 +346,7 @@ void can_restart(unsigned long data)
         skb = dev_alloc_skb(sizeof(struct can_frame));
         if (skb == NULL) {
                 err = -ENOMEM;
-                goto out;
+                goto restart;
         }
         skb->dev = dev;
         skb->protocol = htons(ETH_P_CAN);
@@ -361,13 +361,13 @@ void can_restart(unsigned long data)
         stats->rx_packets++;
         stats->rx_bytes += cf->can_dlc;
 
+restart:
         dev_dbg(dev->dev.parent, "restarted\n");
         priv->can_stats.restarts++;
 
         /* Now restart the device */
         err = priv->do_set_mode(dev, CAN_MODE_START);
 
-out:
         netif_carrier_on(dev);
         if (err)
                 dev_err(dev->dev.parent, "Error %d during restart", err);
@@ -473,6 +473,10 @@ int open_candev(struct net_device *dev)
                 return -EINVAL;
         }
 
+        /* Switch carrier on if device was stopped while in bus-off state */
+        if (!netif_carrier_ok(dev))
+                netif_carrier_on(dev);
+
         setup_timer(&priv->restart_timer, can_restart, (unsigned long)dev);
 
         return 0;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 571f133a8fec..08ebee79d8a6 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -63,7 +63,6 @@
 #include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
-#include <linux/can/dev.h>
 
 #include "sja1000.h"
 
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4d1515f45ba2..4869d77cbe91 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -227,7 +227,7 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
         }
 
         rcu_read_lock();
-        ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+        ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
         if (ulp_ops)
                 ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
         rcu_read_unlock();
@@ -319,6 +319,20 @@ static int cnic_abort_prep(struct cnic_sock *csk)
         return 0;
 }
 
+static void cnic_uio_stop(void)
+{
+        struct cnic_dev *dev;
+
+        read_lock(&cnic_dev_lock);
+        list_for_each_entry(dev, &cnic_dev_list, list) {
+                struct cnic_local *cp = dev->cnic_priv;
+
+                if (cp->cnic_uinfo)
+                        cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+        }
+        read_unlock(&cnic_dev_lock);
+}
+
 int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 {
         struct cnic_dev *dev;
@@ -390,6 +404,9 @@ int cnic_unregister_driver(int ulp_type)
         }
         read_unlock(&cnic_dev_lock);
 
+        if (ulp_type == CNIC_ULP_ISCSI)
+                cnic_uio_stop();
+
         rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
 
         mutex_unlock(&cnic_lock);
@@ -632,7 +649,6 @@ static void cnic_free_resc(struct cnic_dev *dev)
         int i = 0;
 
         if (cp->cnic_uinfo) {
-                cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
                 while (cp->uio_dev != -1 && i < 15) {
                         msleep(100);
                         i++;
@@ -1057,6 +1073,9 @@ static void cnic_ulp_stop(struct cnic_dev *dev)
         struct cnic_local *cp = dev->cnic_priv;
         int if_type;
 
+        if (cp->cnic_uinfo)
+                cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
         rcu_read_lock();
         for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
                 struct cnic_ulp_ops *ulp_ops;
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 3eee666a9cd2..55445f980f9c 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1524,6 +1524,7 @@ static void net_timeout(struct net_device *dev)
 static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
         struct net_local *lp = netdev_priv(dev);
+        unsigned long flags;
 
         if (net_debug > 3) {
                 printk("%s: sent %d byte packet of type %x\n",
@@ -1535,7 +1536,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
                   ask the chip to start transmitting before the
                   whole packet has been completely uploaded. */
 
-        spin_lock_irq(&lp->lock);
+        spin_lock_irqsave(&lp->lock, flags);
         netif_stop_queue(dev);
 
         /* initiate a transmit sequence */
@@ -1549,13 +1550,13 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
                  * we're waiting for TxOk, so return 1 and requeue this packet.
                  */
 
-                spin_unlock_irq(&lp->lock);
+                spin_unlock_irqrestore(&lp->lock, flags);
                 if (net_debug) printk("cs89x0: Tx buffer not free!\n");
                 return NETDEV_TX_BUSY;
         }
         /* Write the contents of the packet */
         writewords(dev->base_addr, TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
-        spin_unlock_irq(&lp->lock);
+        spin_unlock_irqrestore(&lp->lock, flags);
         lp->stats.tx_bytes += skb->len;
         dev->trans_start = jiffies;
         dev_kfree_skb (skb);
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index efa680f4b8dd..41b648a67fec 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1897,6 +1897,9 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 
                         if (ioread8(&nic->csr->scb.status) & rus_no_res)
                                 nic->ru_running = RU_SUSPENDED;
+                pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+                                               sizeof(struct rfd),
+                                               PCI_DMA_BIDIRECTIONAL);
                 return -ENODATA;
         }
 
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index cc2ab6412c73..4f7003485348 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1784,7 +1784,7 @@ int __init init_module(void)
                 printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
         }
 
-        for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
+        for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
                 dev = alloc_etherdev(sizeof(struct eepro_local));
                 if (!dev)
                         break;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 147c4b088fb3..e8d46cc1bec2 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -3080,7 +3080,9 @@ static const struct net_device_ops ehea_netdev_ops = {
         .ndo_poll_controller    = ehea_netpoll,
 #endif
         .ndo_get_stats          = ehea_get_stats,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_set_mac_address    = ehea_set_mac_addr,
+        .ndo_validate_addr      = eth_validate_addr,
         .ndo_set_multicast_list = ehea_set_multicast_list,
         .ndo_change_mtu         = ehea_change_mtu,
         .ndo_vlan_rx_register   = ehea_vlan_rx_register,
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 48385c42ab57..160655d24581 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -584,7 +584,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
         if (np->flags == HAS_MII_XCVR) {
                 int phy, phy_idx = 0;
 
-                for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+                for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys);
+                               phy++) {
                         int mii_status = mdio_read(dev, phy, 1);
 
                         if (mii_status != 0xffff && mii_status != 0x0000) {
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 0f19b743749b..d4b98074b1b7 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -1642,6 +1642,7 @@ static const struct net_device_ops fec_netdev_ops = {
         .ndo_stop               = fec_enet_close,
         .ndo_start_xmit         = fec_enet_start_xmit,
         .ndo_set_multicast_list = set_multicast_list,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_validate_addr      = eth_validate_addr,
         .ndo_tx_timeout         = fec_timeout,
         .ndo_set_mac_address    = fec_set_mac_address,
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index b892c3ad9a74..2bc2d2b20644 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -754,17 +754,16 @@ static int fs_init_phy(struct net_device *dev)
         fep->oldlink = 0;
         fep->oldspeed = 0;
         fep->oldduplex = -1;
-        if(fep->fpi->phy_node)
-                phydev = of_phy_connect(dev, fep->fpi->phy_node,
-                                        &fs_adjust_link, 0,
-                                        PHY_INTERFACE_MODE_MII);
-        else {
-                printk("No phy bus ID specified in BSP code\n");
-                return -EINVAL;
+
+        phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0,
+                                PHY_INTERFACE_MODE_MII);
+        if (!phydev) {
+                phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link,
+                                                   PHY_INTERFACE_MODE_MII);
         }
-        if (IS_ERR(phydev)) {
-                printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-                return PTR_ERR(phydev);
+        if (!phydev) {
+                dev_err(&dev->dev, "Could not attach to PHY\n");
+                return -ENODEV;
         }
 
         fep->phydev = phydev;
@@ -1005,6 +1004,7 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
                 goto out_free_fpi;
         }
 
+        SET_NETDEV_DEV(ndev, &ofdev->dev);
         dev_set_drvdata(&ofdev->dev, ndev);
 
         fep = netdev_priv(ndev);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 4ae1d259fced..f8ffcbf0bc39 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -156,6 +156,8 @@ static const struct net_device_ops gfar_netdev_ops = {
         .ndo_tx_timeout = gfar_timeout,
         .ndo_do_ioctl = gfar_ioctl,
         .ndo_vlan_rx_register = gfar_vlan_rx_register,
+        .ndo_set_mac_address = eth_mac_addr,
+        .ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
         .ndo_poll_controller = gfar_netpoll,
 #endif
@@ -262,15 +264,6 @@ static int gfar_of_init(struct net_device *dev)
                 priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
         priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
-        if (!priv->phy_node) {
-                u32 *fixed_link;
-
-                fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
-                if (!fixed_link) {
-                        err = -ENODEV;
-                        goto err_out;
-                }
-        }
 
         /* Find the TBI PHY.  If it's not there, we don't support SGMII */
         priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -657,13 +650,14 @@ static int init_phy(struct net_device *dev)
 
         interface = gfar_get_interface(dev);
 
-        if (priv->phy_node) {
-                priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
-                                              0, interface);
-                if (!priv->phydev) {
-                        dev_err(&dev->dev, "error: Could not attach to PHY\n");
-                        return -ENODEV;
-                }
+        priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+                                      interface);
+        if (!priv->phydev)
+                priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+                                                         interface);
+        if (!priv->phydev) {
+                dev_err(&dev->dev, "could not attach to PHY\n");
+                return -ENODEV;
         }
 
         if (interface == PHY_INTERFACE_MODE_SGMII)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 155160052c8b..981ab530e9ac 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -3,7 +3,7 @@
  *              devices like TTY. It interfaces between a raw TTY and the
  *              kernel's AX.25 protocol layers.
  *
- * Authors:     Andreas Könsgen <ajk@iehk.rwth-aachen.de>
+ * Authors:     Andreas Könsgen <ajk@comnets.uni-bremen.de>
  *              Ralf Baechle DL5RB <ralf@linux-mips.org>
  *
  * Quite a lot of stuff "stolen" by Joerg Reuter from slip.c, written by
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c
index 1d5379de6900..8d76cb89dbd6 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ibm_newemac/rgmii.c
@@ -188,11 +188,12 @@ void rgmii_put_mdio(struct of_device *ofdev, int input)
 void rgmii_detach(struct of_device *ofdev, int input)
 {
         struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
-        struct rgmii_regs __iomem *p = dev->base;
-
-        mutex_lock(&dev->lock);
+        struct rgmii_regs __iomem *p;
 
         BUG_ON(!dev || dev->users == 0);
+        p = dev->base;
+
+        mutex_lock(&dev->lock);
 
         RGMII_DBG(dev, "detach(%d)" NL, input);
 
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index be480292aba1..adb09d32625d 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -127,14 +127,48 @@ static void igb_restore_vlan(struct igb_adapter *);
 static void igb_ping_all_vfs(struct igb_adapter *);
 static void igb_msg_task(struct igb_adapter *);
 static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
 static void igb_set_mc_list_pools(struct igb_adapter *, int, u16);
 static void igb_vmm_control(struct igb_adapter *);
-static inline void igb_set_vmolr(struct e1000_hw *, int);
-static inline int igb_set_vf_rlpml(struct igb_adapter *, int, int);
 static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 
+static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
+{
+        u32 reg_data;
+
+        reg_data = rd32(E1000_VMOLR(vfn));
+        reg_data |= E1000_VMOLR_BAM |    /* Accept broadcast */
+                    E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
+                    E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
+                    E1000_VMOLR_AUPE |   /* Accept untagged packets */
+                    E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+        wr32(E1000_VMOLR(vfn), reg_data);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                 int vfn)
+{
+        struct e1000_hw *hw = &adapter->hw;
+        u32 vmolr;
+
+        vmolr = rd32(E1000_VMOLR(vfn));
+        vmolr &= ~E1000_VMOLR_RLPML_MASK;
+        vmolr |= size | E1000_VMOLR_LPE;
+        wr32(E1000_VMOLR(vfn), vmolr);
+
+        return 0;
+}
+
+static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
+{
+        u32 reg_data;
+
+        reg_data = rd32(E1000_RAH(entry));
+        reg_data &= ~E1000_RAH_POOL_MASK;
+        reg_data |= E1000_RAH_POOL_1 << pool;;
+        wr32(E1000_RAH(entry), reg_data);
+}
+
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
 static int igb_resume(struct pci_dev *);
@@ -5418,43 +5452,6 @@ static void igb_io_resume(struct pci_dev *pdev)
         igb_get_hw_control(adapter);
 }
 
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
-        u32 reg_data;
-
-        reg_data = rd32(E1000_VMOLR(vfn));
-        reg_data |= E1000_VMOLR_BAM |    /* Accept broadcast */
-                    E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
-                    E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
-                    E1000_VMOLR_AUPE |   /* Accept untagged packets */
-                    E1000_VMOLR_STRVLAN; /* Strip vlan tags */
-        wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
-                                 int vfn)
-{
-        struct e1000_hw *hw = &adapter->hw;
-        u32 vmolr;
-
-        vmolr = rd32(E1000_VMOLR(vfn));
-        vmolr &= ~E1000_VMOLR_RLPML_MASK;
-        vmolr |= size | E1000_VMOLR_LPE;
-        wr32(E1000_VMOLR(vfn), vmolr);
-
-        return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
-        u32 reg_data;
-
-        reg_data = rd32(E1000_RAH(entry));
-        reg_data &= ~E1000_RAH_POOL_MASK;
-        reg_data |= E1000_RAH_POOL_1 << pool;;
-        wr32(E1000_RAH(entry), reg_data);
-}
-
 static void igb_set_mc_list_pools(struct igb_adapter *adapter,
                                   int entry_count, u16 total_rar_filters)
 {
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index d53aa9582137..20f9bc626688 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -31,7 +31,6 @@
 #include <linux/tty.h>
 #include <linux/init.h>
 #include <asm/uaccess.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 73585fd8f29f..d12377b84358 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -430,7 +430,8 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
          * hardware interrupt handler.  Queue flow control is
          * thus managed under this lock as well.
          */
-        spin_lock_irq(&np->lock);
+        unsigned long flags;
+        spin_lock_irqsave(&np->lock, flags);
 
         add_to_tx_ring(np, skb, length);
         dev->trans_start = jiffies;
@@ -446,7 +447,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
          * is when the transmit statistics are updated.
          */
 
-        spin_unlock_irq(&np->lock);
+        spin_unlock_irqrestore(&np->lock, flags);
 #else
         /* This is the case for older hardware which takes
          * a single transmit buffer at a time, and it is
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index cd22323cfd22..1b12c7ba275f 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -327,6 +327,7 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
 #define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
 #define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 28)
 #define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
 
         u32 flags2;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 7c5978ad929a..1c7265732900 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -106,8 +106,6 @@ static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
 {
         struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-        DPRINTK(DRV, INFO, "Get DCB Admin Mode.\n");
-
         return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
 }
 
@@ -116,8 +114,6 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
         u8 err = 0;
         struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
-        DPRINTK(DRV, INFO, "Set DCB Admin Mode.\n");
-
         if (state > 0) {
                 /* Turn on DCB */
                 if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
@@ -143,6 +139,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
                         adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
                 }
                 adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+#ifdef IXGBE_FCOE
+                /* Turn on FCoE offload */
+                if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
+                    (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
+                        adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+                        adapter->ring_feature[RING_F_FCOE].indices =
+                                IXGBE_FCRETA_SIZE;
+                        netdev->features |= NETIF_F_FCOE_CRC;
+                        netdev->features |= NETIF_F_FSO;
+                        netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+                }
+#endif /* IXGBE_FCOE */
                 ixgbe_init_interrupt_scheme(adapter);
                 if (netif_running(netdev))
                         netdev->netdev_ops->ndo_open(netdev);
@@ -160,6 +168,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
                         adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
                         if (adapter->hw.mac.type == ixgbe_mac_82599EB)
                                 adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+                        /* Turn off FCoE offload */
+                        if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
+                             IXGBE_FLAG_FCOE_ENABLED)) {
+                                adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+                                adapter->ring_feature[RING_F_FCOE].indices = 0;
+                                netdev->features &= ~NETIF_F_FCOE_CRC;
+                                netdev->features &= ~NETIF_F_FSO;
+                                netdev->fcoe_ddp_xid = 0;
+                        }
+#endif /* IXGBE_FCOE */
                         ixgbe_init_interrupt_scheme(adapter);
                         if (netif_running(netdev))
                                 netdev->netdev_ops->ndo_open(netdev);
@@ -175,6 +195,8 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
         struct ixgbe_adapter *adapter = netdev_priv(netdev);
         int i, j;
 
+        memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
         for (i = 0; i < netdev->addr_len; i++)
                 perm_addr[i] = adapter->hw.mac.perm_addr[i];
 
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e3442f47f932..200454f30f6a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
+#include <linux/pkt_sched.h>
 #include <linux/ipv6.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
@@ -510,8 +511,11 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
  * @skb: skb currently being received and modified
  **/
 static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
-                                     u32 status_err, struct sk_buff *skb)
+                                     union ixgbe_adv_rx_desc *rx_desc,
+                                     struct sk_buff *skb)
 {
+        u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
+
         skb->ip_summed = CHECKSUM_NONE;
 
         /* Rx csum disabled */
@@ -529,6 +533,16 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
                 return;
 
         if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+                u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+                /*
+                 * 82599 errata, UDP frames with a 0 checksum can be marked as
+                 * checksum errors.
+                 */
+                if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+                    (adapter->hw.mac.type == ixgbe_mac_82599EB))
+                        return;
+
                 adapter->hw_csum_rx_error++;
                 return;
         }
@@ -802,7 +816,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
                         goto next_desc;
                 }
 
-                ixgbe_rx_checksum(adapter, staterr, skb);
+                ixgbe_rx_checksum(adapter, rx_desc, skb);
 
                 /* probably a little skewed due to removing CRC */
                 total_rx_bytes += skb->len;
@@ -3806,8 +3820,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
                 adapter->atr_sample_rate = 20;
                 adapter->fdir_pballoc = 0;
 #ifdef IXGBE_FCOE
-                adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
-                adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+                adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+                adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+                adapter->ring_feature[RING_F_FCOE].indices = 0;
 #endif /* IXGBE_FCOE */
         }
 
@@ -5125,9 +5140,6 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
         int count = 0;
         unsigned int f;
 
-        r_idx = skb->queue_mapping;
-        tx_ring = &adapter->tx_ring[r_idx];
-
         if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
                 tx_flags |= vlan_tx_tag_get(skb);
                 if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
@@ -5137,11 +5149,19 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
                 tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
                 tx_flags |= IXGBE_TX_FLAGS_VLAN;
         } else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-                tx_flags |= (skb->queue_mapping << 13);
-                tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-                tx_flags |= IXGBE_TX_FLAGS_VLAN;
+                if (skb->priority != TC_PRIO_CONTROL) {
+                        tx_flags |= (skb->queue_mapping << 13);
+                        tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+                        tx_flags |= IXGBE_TX_FLAGS_VLAN;
+                } else {
+                        skb->queue_mapping =
+                                adapter->ring_feature[RING_F_DCB].indices-1;
+                }
         }
 
+        r_idx = skb->queue_mapping;
+        tx_ring = &adapter->tx_ring[r_idx];
+
         if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
             (skb->protocol == htons(ETH_P_FCOE)))
                 tx_flags |= IXGBE_TX_FLAGS_FCOE;
@@ -5580,16 +5600,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 #endif
 
 #ifdef IXGBE_FCOE
-        if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+        if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
                 if (hw->mac.ops.get_device_caps) {
                         hw->mac.ops.get_device_caps(hw, &device_caps);
-                        if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
-                                netdev->features |= NETIF_F_FCOE_CRC;
-                                netdev->features |= NETIF_F_FSO;
-                                netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-                        } else {
-                                adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
-                        }
+                        if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+                                adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
                 }
         }
 #endif /* IXGBE_FCOE */
@@ -5638,7 +5653,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
                 adapter->wol = 0;
                 break;
         }
-        device_init_wakeup(&adapter->pdev->dev, true);
         device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
         /* pick up the PCI bus settings for reporting later */
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index d12106b47bf2..2f286091394d 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -229,6 +229,7 @@ static int __init jazz_sonic_probe(struct platform_device *pdev)
         lp = netdev_priv(dev);
         lp->device = &pdev->dev;
         SET_NETDEV_DEV(dev, &pdev->dev);
+        platform_set_drvdata(pdev, dev);
 
         netdev_boot_setup_check(dev);
 
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
new file mode 100644
index 000000000000..9a1dea60c1c4
--- /dev/null
+++ b/drivers/net/ks8851.c
@@ -0,0 +1,1322 @@
+/* drivers/net/ks8651.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *      http://www.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+
+#include <linux/spi/spi.h>
+
+#include "ks8851.h"
+
+/**
+ * struct ks8851_rxctrl - KS8851 driver rx control
+ * @mchash: Multicast hash-table data.
+ * @rxcr1: KS_RXCR1 register setting
+ * @rxcr2: KS_RXCR2 register setting
+ *
+ * Representation of the settings needs to control the receive filtering
+ * such as the multicast hash-filter and the receive register settings. This
+ * is used to make the job of working out if the receive settings change and
+ * then issuing the new settings to the worker that will send the necessary
+ * commands.
+ */
+struct ks8851_rxctrl {
+        u16     mchash[4];
+        u16     rxcr1;
+        u16     rxcr2;
+};
+
+/**
+ * union ks8851_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks8851_tx_hdr {
+        u8      txb[6];
+        __le16  txw[3];
+};
+
+/**
+ * struct ks8851_net - KS8851 driver private data
+ * @netdev: The network device we're bound to
+ * @spidev: The spi device we're bound to.
+ * @lock: Lock to ensure that the device is not accessed when busy.
+ * @statelock: Lock on this structure for tx list.
+ * @mii: The MII state information for the mii calls.
+ * @rxctrl: RX settings for @rxctrl_work.
+ * @tx_work: Work queue for tx packets
+ * @irq_work: Work queue for servicing interrupts
+ * @rxctrl_work: Work queue for updating RX mode and multicast lists
+ * @txq: Queue of packets for transmission.
+ * @spi_msg1: pre-setup SPI transfer with one message, @spi_xfer1.
+ * @spi_msg2: pre-setup SPI transfer with two messages, @spi_xfer2.
+ * @txh: Space for generating packet TX header in DMA-able data
+ * @rxd: Space for receiving SPI data, in DMA-able space.
+ * @txd: Space for transmitting SPI data, in DMA-able space.
+ * @msg_enable: The message flags controlling driver output (see ethtool).
+ * @fid: Incrementing frame id tag.
+ * @rc_ier: Cached copy of KS_IER.
+ * @rc_rxqcr: Cached copy of KS_RXQCR.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not ccessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ * We align the buffers we may use for rx/tx to ensure that if the SPI driver
+ * wants to DMA map them, it will not have any problems with data the driver
+ * modifies.
+ */
+struct ks8851_net {
+        struct net_device       *netdev;
+        struct spi_device       *spidev;
+        struct mutex            lock;
+        spinlock_t              statelock;
+
+        union ks8851_tx_hdr     txh ____cacheline_aligned;
+        u8                      rxd[8];
+        u8                      txd[8];
+
+        u32                     msg_enable ____cacheline_aligned;
+        u16                     tx_space;
+        u8                      fid;
+
+        u16                     rc_ier;
+        u16                     rc_rxqcr;
+
+        struct mii_if_info      mii;
+        struct ks8851_rxctrl    rxctrl;
+
+        struct work_struct      tx_work;
+        struct work_struct      irq_work;
+        struct work_struct      rxctrl_work;
+
+        struct sk_buff_head     txq;
+
+        struct spi_message      spi_msg1;
+        struct spi_message      spi_msg2;
+        struct spi_transfer     spi_xfer1;
+        struct spi_transfer     spi_xfer2[2];
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->spidev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->spidev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->spidev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->spidev->dev, _msg)
+
+/* shift for byte-enable data */
+#define BYTE_EN(_x)     ((_x) << 2)
+
+/* turn register number and byte-enable mask into data for start of packet */
+#define MK_OP(_byteen, _reg) (BYTE_EN(_byteen) | (_reg)  << (8+2) | (_reg) >> 6)
+
+/* SPI register read/write calls.
+ *
+ * All these calls issue SPI transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks8851_wrreg16 - write 16bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg16(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+        struct spi_transfer *xfer = &ks->spi_xfer1;
+        struct spi_message *msg = &ks->spi_msg1;
+        __le16 txb[2];
+        int ret;
+
+        txb[0] = cpu_to_le16(MK_OP(reg & 2 ? 0xC : 0x03, reg) | KS_SPIOP_WR);
+        txb[1] = cpu_to_le16(val);
+
+        xfer->tx_buf = txb;
+        xfer->rx_buf = NULL;
+        xfer->len = 4;
+
+        ret = spi_sync(ks->spidev, msg);
+        if (ret < 0)
+                ks_err(ks, "spi_sync() failed\n");
+}
+
+/**
+ * ks8851_rx_1msg - select whether to use one or two messages for spi read
+ * @ks: The device structure
+ *
+ * Return whether to generate a single message with a tx and rx buffer
+ * supplied to spi_sync(), or alternatively send the tx and rx buffers
+ * as separate messages.
+ *
+ * Depending on the hardware in use, a single message may be more efficient
+ * on interrupts or work done by the driver.
+ *
+ * This currently always returns true until we add some per-device data passed
+ * from the platform code to specify which mode is better.
+ */
+static inline bool ks8851_rx_1msg(struct ks8851_net *ks)
+{
+        return true;
+}
+
+/**
+ * ks8851_rdreg - issue read register command and return the data
+ * @ks: The device state
+ * @op: The register address and byte enables in message format.
+ * @rxb: The RX buffer to return the result into
+ * @rxl: The length of data expected.
+ *
+ * This is the low level read call that issues the necessary spi message(s)
+ * to read data from the register specified in @op.
+ */
+static void ks8851_rdreg(struct ks8851_net *ks, unsigned op,
+                         u8 *rxb, unsigned rxl)
+{
+        struct spi_transfer *xfer;
+        struct spi_message *msg;
+        __le16 *txb = (__le16 *)ks->txd;
+        u8 *trx = ks->rxd;
+        int ret;
+
+        txb[0] = cpu_to_le16(op | KS_SPIOP_RD);
+
+        if (ks8851_rx_1msg(ks)) {
+                msg = &ks->spi_msg1;
+                xfer = &ks->spi_xfer1;
+
+                xfer->tx_buf = txb;
+                xfer->rx_buf = trx;
+                xfer->len = rxl + 2;
+        } else {
+                msg = &ks->spi_msg2;
+                xfer = ks->spi_xfer2;
+
+                xfer->tx_buf = txb;
+                xfer->rx_buf = NULL;
+                xfer->len = 2;
+
+                xfer++;
+                xfer->tx_buf = NULL;
+                xfer->rx_buf = trx;
+                xfer->len = rxl;
+        }
+
+        ret = spi_sync(ks->spidev, msg);
+        if (ret < 0)
+                ks_err(ks, "read: spi_sync() failed\n");
+        else if (ks8851_rx_1msg(ks))
+                memcpy(rxb, trx + 2, rxl);
+        else
+                memcpy(rxb, trx, rxl);
+}
+
+/**
+ * ks8851_rdreg8 - read 8 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg8(struct ks8851_net *ks, unsigned reg)
+{
+        u8 rxb[1];
+
+        ks8851_rdreg(ks, MK_OP(1 << (reg & 3), reg), rxb, 1);
+        return rxb[0];
+}
+
+/**
+ * ks8851_rdreg16 - read 16 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+*/
+static unsigned ks8851_rdreg16(struct ks8851_net *ks, unsigned reg)
+{
+        __le16 rx = 0;
+
+        ks8851_rdreg(ks, MK_OP(reg & 2 ? 0xC : 0x3, reg), (u8 *)&rx, 2);
+        return le16_to_cpu(rx);
+}
+
+/**
+ * ks8851_rdreg32 - read 32 bit register from device
+ * @ks: The chip information
+ * @reg: The register address
+ *
+ * Read a 32bit register from the chip.
+ *
+ * Note, this read requires the address be aligned to 4 bytes.
+*/
+static unsigned ks8851_rdreg32(struct ks8851_net *ks, unsigned reg)
+{
+        __le32 rx = 0;
+
+        WARN_ON(reg & 3);
+
+        ks8851_rdreg(ks, MK_OP(0xf, reg), (u8 *)&rx, 4);
+        return le32_to_cpu(rx);
+}
+
+/**
+ * ks8851_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks8851_soft_reset(struct ks8851_net *ks, unsigned op)
+{
+        ks8851_wrreg16(ks, KS_GRR, op);
+        mdelay(1);      /* wait a short time to effect reset */
+        ks8851_wrreg16(ks, KS_GRR, 0);
+        mdelay(1);      /* wait for condition to clear */
+}
+
+/**
+ * ks8851_write_mac_addr - write mac address to device registers
+ * @dev: The network device
+ *
+ * Update the KS8851 MAC address registers from the address in @dev.
+ *
+ * This call assumes that the chip is not running, so there is no need to
+ * shutdown the RXQ process whilst setting this.
+*/
+static int ks8851_write_mac_addr(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        u16 *mcp = (u16 *)dev->dev_addr;
+
+        mutex_lock(&ks->lock);
+
+        ks8851_wrreg16(ks, KS_MARL, mcp[0]);
+        ks8851_wrreg16(ks, KS_MARM, mcp[1]);
+        ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+
+        mutex_unlock(&ks->lock);
+
+        return 0;
+}
+
+/**
+ * ks8851_init_mac - initialise the mac address
+ * @ks: The device structure
+ *
+ * Get or create the initial mac address for the device and then set that
+ * into the station address register. Currently we assume that the device
+ * does not have a valid mac address in it, and so we use random_ether_addr()
+ * to create a new one.
+ *
+ * In future, the driver should check to see if the device has an EEPROM
+ * attached and whether that has a valid ethernet address in it.
+ */
+static void ks8851_init_mac(struct ks8851_net *ks)
+{
+        struct net_device *dev = ks->netdev;
+
+        random_ether_addr(dev->dev_addr);
+        ks8851_write_mac_addr(dev);
+}
+
+/**
+ * ks8851_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks8851_net.
+ *
+ * Disable the interrupt from happening again until we've processed the
+ * current status by scheduling ks8851_irq_work().
+ */
+static irqreturn_t ks8851_irq(int irq, void *pw)
+{
+        struct ks8851_net *ks = pw;
+
+        disable_irq_nosync(irq);
+        schedule_work(&ks->irq_work);
+        return IRQ_HANDLED;
+}
+
+/**
+ * ks8851_rdfifo - read data from the receive fifo
+ * @ks: The device state.
+ * @buff: The buffer address
+ * @len: The length of the data to read
+ *
+ * Issue an RXQ FIFO read command and read the @len ammount of data from
+ * the FIFO into the buffer specified by @buff.
+ */
+static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len)
+{
+        struct spi_transfer *xfer = ks->spi_xfer2;
+        struct spi_message *msg = &ks->spi_msg2;
+        u8 txb[1];
+        int ret;
+
+        if (netif_msg_rx_status(ks))
+                ks_dbg(ks, "%s: %d@%p\n", __func__, len, buff);
+
+        /* set the operation we're issuing */
+        txb[0] = KS_SPIOP_RXFIFO;
+
+        xfer->tx_buf = txb;
+        xfer->rx_buf = NULL;
+        xfer->len = 1;
+
+        xfer++;
+        xfer->rx_buf = buff;
+        xfer->tx_buf = NULL;
+        xfer->len = len;
+
+        ret = spi_sync(ks->spidev, msg);
+        if (ret < 0)
+                ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_dbg_dumpkkt - dump initial packet contents to debug
+ * @ks: The device state
+ * @rxpkt: The data for the received packet
+ *
+ * Dump the initial data from the packet to dev_dbg().
+*/
+static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
+{
+        ks_dbg(ks, "pkt %02x%02x%02x%02x %02x%02x%02x%02x %02x%02x%02x%02x\n",
+               rxpkt[4], rxpkt[5], rxpkt[6], rxpkt[7],
+               rxpkt[8], rxpkt[9], rxpkt[10], rxpkt[11],
+               rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
+}
+
+/**
+ * ks8851_rx_pkts - receive packets from the host
+ * @ks: The device information.
+ *
+ * This is called from the IRQ work queue when the system detects that there
+ * are packets in the receive queue. Find out how many packets there are and
+ * read them from the FIFO.
+ */
+static void ks8851_rx_pkts(struct ks8851_net *ks)
+{
+        struct sk_buff *skb;
+        unsigned rxfc;
+        unsigned rxlen;
+        unsigned rxstat;
+        u32 rxh;
+        u8 *rxpkt;
+
+        rxfc = ks8851_rdreg8(ks, KS_RXFC);
+
+        if (netif_msg_rx_status(ks))
+                ks_dbg(ks, "%s: %d packets\n", __func__, rxfc);
+
+        /* Currently we're issuing a read per packet, but we could possibly
+         * improve the code by issuing a single read, getting the receive
+         * header, allocating the packet and then reading the packet data
+         * out in one go.
+         *
+         * This form of operation would require us to hold the SPI bus'
+         * chipselect low during the entie transaction to avoid any
+         * reset to the data stream comming from the chip.
+         */
+
+        for (; rxfc != 0; rxfc--) {
+                rxh = ks8851_rdreg32(ks, KS_RXFHSR);
+                rxstat = rxh & 0xffff;
+                rxlen = rxh >> 16;
+
+                if (netif_msg_rx_status(ks))
+                        ks_dbg(ks, "rx: stat 0x%04x, len 0x%04x\n",
+                                rxstat, rxlen);
+
+                /* the length of the packet includes the 32bit CRC */
+
+                /* set dma read address */
+                ks8851_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI | 0x00);
+
+                /* start the packet dma process, and set auto-dequeue rx */
+                ks8851_wrreg16(ks, KS_RXQCR,
+                               ks->rc_rxqcr | RXQCR_SDA | RXQCR_ADRFE);
+
+                if (rxlen > 0) {
+                        skb = netdev_alloc_skb(ks->netdev, rxlen + 2 + 8);
+                        if (!skb) {
+                                /* todo - dump frame and move on */
+                        }
+
+                        /* two bytes to ensure ip is aligned, and four bytes
+                         * for the status header and 4 bytes of garbage */
+                        skb_reserve(skb, 2 + 4 + 4);
+
+                        rxpkt = skb_put(skb, rxlen - 4) - 8;
+
+                        /* align the packet length to 4 bytes, and add 4 bytes
+                         * as we're getting the rx status header as well */
+                        ks8851_rdfifo(ks, rxpkt, ALIGN(rxlen, 4) + 8);
+
+                        if (netif_msg_pktdata(ks))
+                                ks8851_dbg_dumpkkt(ks, rxpkt);
+
+                        skb->protocol = eth_type_trans(skb, ks->netdev);
+                        netif_rx(skb);
+
+                        ks->netdev->stats.rx_packets++;
+                        ks->netdev->stats.rx_bytes += rxlen - 4;
+                }
+
+                ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+        }
+}
+
+/**
+ * ks8851_irq_work - work queue handler for dealing with interrupt requests
+ * @work: The work structure that was scheduled by schedule_work()
+ *
+ * This is the handler invoked when the ks8851_irq() is called to find out
+ * what happened, as we cannot allow ourselves to sleep whilst waiting for
+ * anything other process has the chip's lock.
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+static void ks8851_irq_work(struct work_struct *work)
+{
+        struct ks8851_net *ks = container_of(work, struct ks8851_net, irq_work);
+        unsigned status;
+        unsigned handled = 0;
+
+        mutex_lock(&ks->lock);
+
+        status = ks8851_rdreg16(ks, KS_ISR);
+
+        if (netif_msg_intr(ks))
+                dev_dbg(&ks->spidev->dev, "%s: status 0x%04x\n",
+                        __func__, status);
+
+        if (status & IRQ_LCI) {
+                /* should do something about checking link status */
+                handled |= IRQ_LCI;
+        }
+
+        if (status & IRQ_LDI) {
+                u16 pmecr = ks8851_rdreg16(ks, KS_PMECR);
+                pmecr &= ~PMECR_WKEVT_MASK;
+                ks8851_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+
+                handled |= IRQ_LDI;
+        }
+
+        if (status & IRQ_RXPSI)
+                handled |= IRQ_RXPSI;
+
+        if (status & IRQ_TXI) {
+                handled |= IRQ_TXI;
+
+                /* no lock here, tx queue should have been stopped */
+
+                /* update our idea of how much tx space is available to the
+                 * system */
+                ks->tx_space = ks8851_rdreg16(ks, KS_TXMIR);
+
+                if (netif_msg_intr(ks))
+                        ks_dbg(ks, "%s: txspace %d\n", __func__, ks->tx_space);
+        }
+
+        if (status & IRQ_RXI)
+                handled |= IRQ_RXI;
+
+        if (status & IRQ_SPIBEI) {
+                dev_err(&ks->spidev->dev, "%s: spi bus error\n", __func__);
+                handled |= IRQ_SPIBEI;
+        }
+
+        ks8851_wrreg16(ks, KS_ISR, handled);
+
+        if (status & IRQ_RXI) {
+                /* the datasheet says to disable the rx interrupt during
+                 * packet read-out, however we're masking the interrupt
+                 * from the device so do not bother masking just the RX
+                 * from the device. */
+
+                ks8851_rx_pkts(ks);
+        }
+
+        /* if something stopped the rx process, probably due to wanting
+         * to change the rx settings, then do something about restarting
+         * it. */
+        if (status & IRQ_RXPSI) {
+                struct ks8851_rxctrl *rxc = &ks->rxctrl;
+
+                /* update the multicast hash table */
+                ks8851_wrreg16(ks, KS_MAHTR0, rxc->mchash[0]);
+                ks8851_wrreg16(ks, KS_MAHTR1, rxc->mchash[1]);
+                ks8851_wrreg16(ks, KS_MAHTR2, rxc->mchash[2]);
+                ks8851_wrreg16(ks, KS_MAHTR3, rxc->mchash[3]);
+
+                ks8851_wrreg16(ks, KS_RXCR2, rxc->rxcr2);
+                ks8851_wrreg16(ks, KS_RXCR1, rxc->rxcr1);
+        }
+
+        mutex_unlock(&ks->lock);
+
+        if (status & IRQ_TXI)
+                netif_wake_queue(ks->netdev);
+
+        enable_irq(ks->netdev->irq);
+}
+
+/**
+ * calc_txlen - calculate size of message to send packet
+ * @len: Lenght of data
+ *
+ * Returns the size of the TXFIFO message needed to send
+ * this packet.
+ */
+static inline unsigned calc_txlen(unsigned len)
+{
+        return ALIGN(len + 4, 4);
+}
+
+/**
+ * ks8851_wrpkt - write packet to TX FIFO
+ * @ks: The device state.
+ * @txp: The sk_buff to transmit.
+ * @irq: IRQ on completion of the packet.
+ *
+ * Send the @txp to the chip. This means creating the relevant packet header
+ * specifying the length of the packet and the other information the chip
+ * needs, such as IRQ on completion. Send the header and the packet data to
+ * the device.
+ */
+static void ks8851_wrpkt(struct ks8851_net *ks, struct sk_buff *txp, bool irq)
+{
+        struct spi_transfer *xfer = ks->spi_xfer2;
+        struct spi_message *msg = &ks->spi_msg2;
+        unsigned fid = 0;
+        int ret;
+
+        if (netif_msg_tx_queued(ks))
+                dev_dbg(&ks->spidev->dev, "%s: skb %p, %d@%p, irq %d\n",
+                        __func__, txp, txp->len, txp->data, irq);
+
+        fid = ks->fid++;
+        fid &= TXFR_TXFID_MASK;
+
+        if (irq)
+                fid |= TXFR_TXIC;       /* irq on completion */
+
+        /* start header at txb[1] to align txw entries */
+        ks->txh.txb[1] = KS_SPIOP_TXFIFO;
+        ks->txh.txw[1] = cpu_to_le16(fid);
+        ks->txh.txw[2] = cpu_to_le16(txp->len);
+
+        xfer->tx_buf = &ks->txh.txb[1];
+        xfer->rx_buf = NULL;
+        xfer->len = 5;
+
+        xfer++;
+        xfer->tx_buf = txp->data;
+        xfer->rx_buf = NULL;
+        xfer->len = ALIGN(txp->len, 4);
+
+        ret = spi_sync(ks->spidev, msg);
+        if (ret < 0)
+                ks_err(ks, "%s: spi_sync() failed\n", __func__);
+}
+
+/**
+ * ks8851_done_tx - update and then free skbuff after transmitting
+ * @ks: The device state
+ * @txb: The buffer transmitted
+ */
+static void ks8851_done_tx(struct ks8851_net *ks, struct sk_buff *txb)
+{
+        struct net_device *dev = ks->netdev;
+
+        dev->stats.tx_bytes += txb->len;
+        dev->stats.tx_packets++;
+
+        dev_kfree_skb(txb);
+}
+
+/**
+ * ks8851_tx_work - process tx packet(s)
+ * @work: The work strucutre what was scheduled.
+ *
+ * This is called when a number of packets have been scheduled for
+ * transmission and need to be sent to the device.
+ */
+static void ks8851_tx_work(struct work_struct *work)
+{
+        struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
+        struct sk_buff *txb;
+        bool last = false;
+
+        mutex_lock(&ks->lock);
+
+        while (!last) {
+                txb = skb_dequeue(&ks->txq);
+                last = skb_queue_empty(&ks->txq);
+
+                ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+                ks8851_wrpkt(ks, txb, last);
+                ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+                ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+
+                ks8851_done_tx(ks, txb);
+        }
+
+        mutex_unlock(&ks->lock);
+}
+
+/**
+ * ks8851_set_powermode - set power mode of the device
+ * @ks: The device state
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks8851_set_powermode(struct ks8851_net *ks, unsigned pwrmode)
+{
+        unsigned pmecr;
+
+        if (netif_msg_hw(ks))
+                ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+        pmecr = ks8851_rdreg16(ks, KS_PMECR);
+        pmecr &= ~PMECR_PM_MASK;
+        pmecr |= pwrmode;
+
+        ks8851_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks8851_net_open - open network device
+ * @dev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks8851_net_open(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+
+        /* lock the card, even if we may not actually be doing anything
+         * else at the moment */
+        mutex_lock(&ks->lock);
+
+        if (netif_msg_ifup(ks))
+                ks_dbg(ks, "opening %s\n", dev->name);
+
+        /* bring chip out of any power saving mode it was in */
+        ks8851_set_powermode(ks, PMECR_PM_NORMAL);
+
+        /* issue a soft reset to the RX/TX QMU to put it into a known
+         * state. */
+        ks8851_soft_reset(ks, GRR_QMU);
+
+        /* setup transmission parameters */
+
+        ks8851_wrreg16(ks, KS_TXCR, (TXCR_TXE | /* enable transmit process */
+                                     TXCR_TXPE | /* pad to min length */
+                                     TXCR_TXCRC | /* add CRC */
+                                     TXCR_TXFCE)); /* enable flow control */
+
+        /* auto-increment tx data, reset tx pointer */
+        ks8851_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+        /* setup receiver control */
+
+        ks8851_wrreg16(ks, KS_RXCR1, (RXCR1_RXPAFMA | /*  from mac filter */
+                                      RXCR1_RXFCE | /* enable flow control */
+                                      RXCR1_RXBE | /* broadcast enable */
+                                      RXCR1_RXUE | /* unicast enable */
+                                      RXCR1_RXE)); /* enable rx block */
+
+        /* transfer entire frames out in one go */
+        ks8851_wrreg16(ks, KS_RXCR2, RXCR2_SRDBL_FRAME);
+
+        /* set receive counter timeouts */
+        ks8851_wrreg16(ks, KS_RXDTTR, 1000); /* 1ms after first frame to IRQ */
+        ks8851_wrreg16(ks, KS_RXDBCTR, 4096); /* >4Kbytes in buffer to IRQ */
+        ks8851_wrreg16(ks, KS_RXFCTR, 10);  /* 10 frames to IRQ */
+
+        ks->rc_rxqcr = (RXQCR_RXFCTE |  /* IRQ on frame count exceeded */
+                        RXQCR_RXDBCTE | /* IRQ on byte count exceeded */
+                        RXQCR_RXDTTE);  /* IRQ on time exceeded */
+
+        ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+        /* clear then enable interrupts */
+
+#define STD_IRQ (IRQ_LCI |      /* Link Change */       \
+                 IRQ_TXI |      /* TX done */           \
+                 IRQ_RXI |      /* RX done */           \
+                 IRQ_SPIBEI |   /* SPI bus error */     \
+                 IRQ_TXPSI |    /* TX process stop */   \
+                 IRQ_RXPSI)     /* RX process stop */
+
+        ks->rc_ier = STD_IRQ;
+        ks8851_wrreg16(ks, KS_ISR, STD_IRQ);
+        ks8851_wrreg16(ks, KS_IER, STD_IRQ);
+
+        netif_start_queue(ks->netdev);
+
+        if (netif_msg_ifup(ks))
+                ks_dbg(ks, "network device %s up\n", dev->name);
+
+        mutex_unlock(&ks->lock);
+        return 0;
+}
+
+/**
+ * ks8851_net_stop - close network device
+ * @dev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks8851_net_stop(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+
+        if (netif_msg_ifdown(ks))
+                ks_info(ks, "%s: shutting down\n", dev->name);
+
+        netif_stop_queue(dev);
+
+        mutex_lock(&ks->lock);
+
+        /* stop any outstanding work */
+        flush_work(&ks->irq_work);
+        flush_work(&ks->tx_work);
+        flush_work(&ks->rxctrl_work);
+
+        /* turn off the IRQs and ack any outstanding */
+        ks8851_wrreg16(ks, KS_IER, 0x0000);
+        ks8851_wrreg16(ks, KS_ISR, 0xffff);
+
+        /* shutdown RX process */
+        ks8851_wrreg16(ks, KS_RXCR1, 0x0000);
+
+        /* shutdown TX process */
+        ks8851_wrreg16(ks, KS_TXCR, 0x0000);
+
+        /* set powermode to soft power down to save power */
+        ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN);
+
+        /* ensure any queued tx buffers are dumped */
+        while (!skb_queue_empty(&ks->txq)) {
+                struct sk_buff *txb = skb_dequeue(&ks->txq);
+
+                if (netif_msg_ifdown(ks))
+                        ks_dbg(ks, "%s: freeing txb %p\n", __func__, txb);
+
+                dev_kfree_skb(txb);
+        }
+
+        mutex_unlock(&ks->lock);
+        return 0;
+}
+
+/**
+ * ks8851_start_xmit - transmit packet
+ * @skb: The buffer to transmit
+ * @dev: The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb. Queue the packet for
+ * the device and schedule the necessary work to transmit the packet when
+ * it is free.
+ *
+ * We do this to firstly avoid sleeping with the network device locked,
+ * and secondly so we can round up more than one packet to transmit which
+ * means we can try and avoid generating too many transmit done interrupts.
+ */
+static int ks8851_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        unsigned needed = calc_txlen(skb->len);
+        int ret = NETDEV_TX_OK;
+
+        if (netif_msg_tx_queued(ks))
+                ks_dbg(ks, "%s: skb %p, %d@%p\n", __func__,
+                       skb, skb->len, skb->data);
+
+        spin_lock(&ks->statelock);
+
+        if (needed > ks->tx_space) {
+                netif_stop_queue(dev);
+                ret = NETDEV_TX_BUSY;
+        } else {
+                ks->tx_space -= needed;
+                skb_queue_tail(&ks->txq, skb);
+        }
+
+        spin_unlock(&ks->statelock);
+        schedule_work(&ks->tx_work);
+
+        return ret;
+}
+
+/**
+ * ks8851_rxctrl_work - work handler to change rx mode
+ * @work: The work structure this belongs to.
+ *
+ * Lock the device and issue the necessary changes to the receive mode from
+ * the network device layer. This is done so that we can do this without
+ * having to sleep whilst holding the network device lock.
+ *
+ * Since the recommendation from Micrel is that the RXQ is shutdown whilst the
+ * receive parameters are programmed, we issue a write to disable the RXQ and
+ * then wait for the interrupt handler to be triggered once the RXQ shutdown is
+ * complete. The interrupt handler then writes the new values into the chip.
+ */
+static void ks8851_rxctrl_work(struct work_struct *work)
+{
+        struct ks8851_net *ks = container_of(work, struct ks8851_net, rxctrl_work);
+
+        mutex_lock(&ks->lock);
+
+        /* need to shutdown RXQ before modifying filter parameters */
+        ks8851_wrreg16(ks, KS_RXCR1, 0x00);
+
+        mutex_unlock(&ks->lock);
+}
+
+static void ks8851_set_rx_mode(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        struct ks8851_rxctrl rxctrl;
+
+        memset(&rxctrl, 0, sizeof(rxctrl));
+
+        if (dev->flags & IFF_PROMISC) {
+                /* interface to receive everything */
+
+                rxctrl.rxcr1 = RXCR1_RXAE | RXCR1_RXINVF;
+        } else if (dev->flags & IFF_ALLMULTI) {
+                /* accept all multicast packets */
+
+                rxctrl.rxcr1 = (RXCR1_RXME | RXCR1_RXAE |
+                                RXCR1_RXPAFMA | RXCR1_RXMAFMA);
+        } else if (dev->flags & IFF_MULTICAST && dev->mc_count > 0) {
+                struct dev_mc_list *mcptr = dev->mc_list;
+                u32 crc;
+                int i;
+
+                /* accept some multicast */
+
+                for (i = dev->mc_count; i > 0; i--) {
+                        crc = ether_crc(ETH_ALEN, mcptr->dmi_addr);
+                        crc >>= (32 - 6);  /* get top six bits */
+
+                        rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
+                        mcptr = mcptr->next;
+                }
+
+                rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+        } else {
+                /* just accept broadcast / unicast */
+                rxctrl.rxcr1 = RXCR1_RXPAFMA;
+        }
+
+        rxctrl.rxcr1 |= (RXCR1_RXUE | /* unicast enable */
+                         RXCR1_RXBE | /* broadcast enable */
+                         RXCR1_RXE | /* RX process enable */
+                         RXCR1_RXFCE); /* enable flow control */
+
+        rxctrl.rxcr2 |= RXCR2_SRDBL_FRAME;
+
+        /* schedule work to do the actual set of the data if needed */
+
+        spin_lock(&ks->statelock);
+
+        if (memcmp(&rxctrl, &ks->rxctrl, sizeof(rxctrl)) != 0) {
+                memcpy(&ks->rxctrl, &rxctrl, sizeof(ks->rxctrl));
+                schedule_work(&ks->rxctrl_work);
+        }
+
+        spin_unlock(&ks->statelock);
+}
+
+static int ks8851_set_mac_address(struct net_device *dev, void *addr)
+{
+        struct sockaddr *sa = addr;
+
+        if (netif_running(dev))
+                return -EBUSY;
+
+        if (!is_valid_ether_addr(sa->sa_data))
+                return -EADDRNOTAVAIL;
+
+        memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN);
+        return ks8851_write_mac_addr(dev);
+}
+
+static int ks8851_net_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+
+        if (!netif_running(dev))
+                return -EINVAL;
+
+        return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks8851_netdev_ops = {
+        .ndo_open               = ks8851_net_open,
+        .ndo_stop               = ks8851_net_stop,
+        .ndo_do_ioctl           = ks8851_net_ioctl,
+        .ndo_start_xmit         = ks8851_start_xmit,
+        .ndo_set_mac_address    = ks8851_set_mac_address,
+        .ndo_set_rx_mode        = ks8851_set_rx_mode,
+        .ndo_change_mtu         = eth_change_mtu,
+        .ndo_validate_addr      = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks8851_get_drvinfo(struct net_device *dev,
+                               struct ethtool_drvinfo *di)
+{
+        strlcpy(di->driver, "KS8851", sizeof(di->driver));
+        strlcpy(di->version, "1.00", sizeof(di->version));
+        strlcpy(di->bus_info, dev_name(dev->dev.parent), sizeof(di->bus_info));
+}
+
+static u32 ks8851_get_msglevel(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        return ks->msg_enable;
+}
+
+static void ks8851_set_msglevel(struct net_device *dev, u32 to)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        ks->msg_enable = to;
+}
+
+static int ks8851_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks8851_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks8851_get_link(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        return mii_link_ok(&ks->mii);
+}
+
+static int ks8851_nway_reset(struct net_device *dev)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks8851_ethtool_ops = {
+        .get_drvinfo    = ks8851_get_drvinfo,
+        .get_msglevel   = ks8851_get_msglevel,
+        .set_msglevel   = ks8851_set_msglevel,
+        .get_settings   = ks8851_get_settings,
+        .set_settings   = ks8851_set_settings,
+        .get_link       = ks8851_get_link,
+        .nway_reset     = ks8851_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks8851_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks8851_phy_reg(int reg)
+{
+        switch (reg) {
+        case MII_BMCR:
+                return KS_P1MBCR;
+        case MII_BMSR:
+                return KS_P1MBSR;
+        case MII_PHYSID1:
+                return KS_PHY1ILR;
+        case MII_PHYSID2:
+                return KS_PHY1IHR;
+        case MII_ADVERTISE:
+                return KS_P1ANAR;
+        case MII_LPA:
+                return KS_P1ANLPR;
+        }
+
+        return 0x0;
+}
+
+/**
+ * ks8851_phy_read - MII interface PHY register read.
+ * @dev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks8851_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        int ksreg;
+        int result;
+
+        ksreg = ks8851_phy_reg(reg);
+        if (!ksreg)
+                return 0x0;     /* no error return allowed, so use zero */
+
+        mutex_lock(&ks->lock);
+        result = ks8851_rdreg16(ks, ksreg);
+        mutex_unlock(&ks->lock);
+
+        return result;
+}
+
+static void ks8851_phy_write(struct net_device *dev,
+                             int phy, int reg, int value)
+{
+        struct ks8851_net *ks = netdev_priv(dev);
+        int ksreg;
+
+        ksreg = ks8851_phy_reg(reg);
+        if (ksreg) {
+                mutex_lock(&ks->lock);
+                ks8851_wrreg16(ks, ksreg, value);
+                mutex_unlock(&ks->lock);
+        }
+}
+
+/**
+ * ks8851_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks8851_read_selftest(struct ks8851_net *ks)
+{
+        unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+        int ret = 0;
+        unsigned rd;
+
+        rd = ks8851_rdreg16(ks, KS_MBIR);
+
+        if ((rd & both_done) != both_done) {
+                ks_warn(ks, "Memory selftest not finished\n");
+                return 0;
+        }
+
+        if (rd & MBIR_TXMBFA) {
+                ks_err(ks, "TX memory selftest fail\n");
+                ret |= 1;
+        }
+
+        if (rd & MBIR_RXMBFA) {
+                ks_err(ks, "RX memory selftest fail\n");
+                ret |= 2;
+        }
+
+        return 0;
+}
+
+/* driver bus management functions */
+
+static int __devinit ks8851_probe(struct spi_device *spi)
+{
+        struct net_device *ndev;
+        struct ks8851_net *ks;
+        int ret;
+
+        ndev = alloc_etherdev(sizeof(struct ks8851_net));
+        if (!ndev) {
+                dev_err(&spi->dev, "failed to alloc ethernet device\n");
+                return -ENOMEM;
+        }
+
+        spi->bits_per_word = 8;
+
+        ks = netdev_priv(ndev);
+
+        ks->netdev = ndev;
+        ks->spidev = spi;
+        ks->tx_space = 6144;
+
+        mutex_init(&ks->lock);
+        spin_lock_init(&ks->statelock);
+
+        INIT_WORK(&ks->tx_work, ks8851_tx_work);
+        INIT_WORK(&ks->irq_work, ks8851_irq_work);
+        INIT_WORK(&ks->rxctrl_work, ks8851_rxctrl_work);
+
+        /* initialise pre-made spi transfer messages */
+
+        spi_message_init(&ks->spi_msg1);
+        spi_message_add_tail(&ks->spi_xfer1, &ks->spi_msg1);
+
+        spi_message_init(&ks->spi_msg2);
+        spi_message_add_tail(&ks->spi_xfer2[0], &ks->spi_msg2);
+        spi_message_add_tail(&ks->spi_xfer2[1], &ks->spi_msg2);
+
+        /* setup mii state */
+        ks->mii.dev             = ndev;
+        ks->mii.phy_id          = 1,
+        ks->mii.phy_id_mask     = 1;
+        ks->mii.reg_num_mask    = 0xf;
+        ks->mii.mdio_read       = ks8851_phy_read;
+        ks->mii.mdio_write      = ks8851_phy_write;
+
+        dev_info(&spi->dev, "message enable is %d\n", msg_enable);
+
+        /* set the default message enable */
+        ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+                                                     NETIF_MSG_PROBE |
+                                                     NETIF_MSG_LINK));
+
+        skb_queue_head_init(&ks->txq);
+
+        SET_ETHTOOL_OPS(ndev, &ks8851_ethtool_ops);
+        SET_NETDEV_DEV(ndev, &spi->dev);
+
+        dev_set_drvdata(&spi->dev, ks);
+
+        ndev->if_port = IF_PORT_100BASET;
+        ndev->netdev_ops = &ks8851_netdev_ops;
+        ndev->irq = spi->irq;
+
+        /* simple check for a valid chip being connected to the bus */
+
+        if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+                dev_err(&spi->dev, "failed to read device ID\n");
+                ret = -ENODEV;
+                goto err_id;
+        }
+
+        ks8851_read_selftest(ks);
+        ks8851_init_mac(ks);
+
+        ret = request_irq(spi->irq, ks8851_irq, IRQF_TRIGGER_LOW,
+                          ndev->name, ks);
+        if (ret < 0) {
+                dev_err(&spi->dev, "failed to get irq\n");
+                goto err_irq;
+        }
+
+        ret = register_netdev(ndev);
+        if (ret) {
+                dev_err(&spi->dev, "failed to register network device\n");
+                goto err_netdev;
+        }
+
+        dev_info(&spi->dev, "revision %d, MAC %pM, IRQ %d\n",
+                 CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)),
+                 ndev->dev_addr, ndev->irq);
+
+        return 0;
+
+
+err_netdev:
+        free_irq(ndev->irq, ndev);
+
+err_id:
+err_irq:
+        free_netdev(ndev);
+        return ret;
+}
+
+static int __devexit ks8851_remove(struct spi_device *spi)
+{
+        struct ks8851_net *priv = dev_get_drvdata(&spi->dev);
+
+        if (netif_msg_drv(priv))
+                dev_info(&spi->dev, "remove");
+
+        unregister_netdev(priv->netdev);
+        free_irq(spi->irq, priv);
+        free_netdev(priv->netdev);
+
+        return 0;
+}
+
+static struct spi_driver ks8851_driver = {
+        .driver = {
+                .name = "ks8851",
+                .owner = THIS_MODULE,
+        },
+        .probe = ks8851_probe,
+        .remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+        return spi_register_driver(&ks8851_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+        spi_unregister_driver(&ks8851_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 Network driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
diff --git a/drivers/net/ks8851.h b/drivers/net/ks8851.h
new file mode 100644
index 000000000000..85abe147afbf
--- /dev/null
+++ b/drivers/net/ks8851.h
@@ -0,0 +1,296 @@
+/* drivers/net/ks8851.h
+ *
+ * Copyright 2009 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8851 register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define KS_CCR                                  0x08
+#define CCR_EEPROM                              (1 << 9)
+#define CCR_SPI                                 (1 << 8)
+#define CCR_32PIN                               (1 << 0)
+
+/* MAC address registers */
+#define KS_MARL                                 0x10
+#define KS_MARM                                 0x12
+#define KS_MARH                                 0x14
+
+#define KS_OBCR                                 0x20
+#define OBCR_ODS_16mA                           (1 << 6)
+
+#define KS_EEPCR                                0x22
+#define EEPCR_EESA                              (1 << 4)
+#define EEPCR_EESB                              (1 << 3)
+#define EEPCR_EEDO                              (1 << 2)
+#define EEPCR_EESCK                             (1 << 1)
+#define EEPCR_EECS                              (1 << 0)
+
+#define KS_MBIR                                 0x24
+#define MBIR_TXMBF                              (1 << 12)
+#define MBIR_TXMBFA                             (1 << 11)
+#define MBIR_RXMBF                              (1 << 4)
+#define MBIR_RXMBFA                             (1 << 3)
+
+#define KS_GRR                                  0x26
+#define GRR_QMU                                 (1 << 1)
+#define GRR_GSR                                 (1 << 0)
+
+#define KS_WFCR                                 0x2A
+#define WFCR_MPRXE                              (1 << 7)
+#define WFCR_WF3E                               (1 << 3)
+#define WFCR_WF2E                               (1 << 2)
+#define WFCR_WF1E                               (1 << 1)
+#define WFCR_WF0E                               (1 << 0)
+
+#define KS_WF0CRC0                              0x30
+#define KS_WF0CRC1                              0x32
+#define KS_WF0BM0                               0x34
+#define KS_WF0BM1                               0x36
+#define KS_WF0BM2                               0x38
+#define KS_WF0BM3                               0x3A
+
+#define KS_WF1CRC0                              0x40
+#define KS_WF1CRC1                              0x42
+#define KS_WF1BM0                               0x44
+#define KS_WF1BM1                               0x46
+#define KS_WF1BM2                               0x48
+#define KS_WF1BM3                               0x4A
+
+#define KS_WF2CRC0                              0x50
+#define KS_WF2CRC1                              0x52
+#define KS_WF2BM0                               0x54
+#define KS_WF2BM1                               0x56
+#define KS_WF2BM2                               0x58
+#define KS_WF2BM3                               0x5A
+
+#define KS_WF3CRC0                              0x60
+#define KS_WF3CRC1                              0x62
+#define KS_WF3BM0                               0x64
+#define KS_WF3BM1                               0x66
+#define KS_WF3BM2                               0x68
+#define KS_WF3BM3                               0x6A
+
+#define KS_TXCR                                 0x70
+#define TXCR_TCGICMP                            (1 << 8)
+#define TXCR_TCGUDP                             (1 << 7)
+#define TXCR_TCGTCP                             (1 << 6)
+#define TXCR_TCGIP                              (1 << 5)
+#define TXCR_FTXQ                               (1 << 4)
+#define TXCR_TXFCE                              (1 << 3)
+#define TXCR_TXPE                               (1 << 2)
+#define TXCR_TXCRC                              (1 << 1)
+#define TXCR_TXE                                (1 << 0)
+
+#define KS_TXSR                                 0x72
+#define TXSR_TXLC                               (1 << 13)
+#define TXSR_TXMC                               (1 << 12)
+#define TXSR_TXFID_MASK                         (0x3f << 0)
+#define TXSR_TXFID_SHIFT                        (0)
+#define TXSR_TXFID_GET(_v)                      (((_v) >> 0) & 0x3f)
+
+#define KS_RXCR1                                0x74
+#define RXCR1_FRXQ                              (1 << 15)
+#define RXCR1_RXUDPFCC                          (1 << 14)
+#define RXCR1_RXTCPFCC                          (1 << 13)
+#define RXCR1_RXIPFCC                           (1 << 12)
+#define RXCR1_RXPAFMA                           (1 << 11)
+#define RXCR1_RXFCE                             (1 << 10)
+#define RXCR1_RXEFE                             (1 << 9)
+#define RXCR1_RXMAFMA                           (1 << 8)
+#define RXCR1_RXBE                              (1 << 7)
+#define RXCR1_RXME                              (1 << 6)
+#define RXCR1_RXUE                              (1 << 5)
+#define RXCR1_RXAE                              (1 << 4)
+#define RXCR1_RXINVF                            (1 << 1)
+#define RXCR1_RXE                               (1 << 0)
+
+#define KS_RXCR2                                0x76
+#define RXCR2_SRDBL_MASK                        (0x7 << 5)
+#define RXCR2_SRDBL_SHIFT                       (5)
+#define RXCR2_SRDBL_4B                          (0x0 << 5)
+#define RXCR2_SRDBL_8B                          (0x1 << 5)
+#define RXCR2_SRDBL_16B                         (0x2 << 5)
+#define RXCR2_SRDBL_32B                         (0x3 << 5)
+#define RXCR2_SRDBL_FRAME                       (0x4 << 5)
+#define RXCR2_IUFFP                             (1 << 4)
+#define RXCR2_RXIUFCEZ                          (1 << 3)
+#define RXCR2_UDPLFE                            (1 << 2)
+#define RXCR2_RXICMPFCC                         (1 << 1)
+#define RXCR2_RXSAF                             (1 << 0)
+
+#define KS_TXMIR                                0x78
+
+#define KS_RXFHSR                               0x7C
+#define RXFSHR_RXFV                             (1 << 15)
+#define RXFSHR_RXICMPFCS                        (1 << 13)
+#define RXFSHR_RXIPFCS                          (1 << 12)
+#define RXFSHR_RXTCPFCS                         (1 << 11)
+#define RXFSHR_RXUDPFCS                         (1 << 10)
+#define RXFSHR_RXBF                             (1 << 7)
+#define RXFSHR_RXMF                             (1 << 6)
+#define RXFSHR_RXUF                             (1 << 5)
+#define RXFSHR_RXMR                             (1 << 4)
+#define RXFSHR_RXFT                             (1 << 3)
+#define RXFSHR_RXFTL                            (1 << 2)
+#define RXFSHR_RXRF                             (1 << 1)
+#define RXFSHR_RXCE                             (1 << 0)
+
+#define KS_RXFHBCR                              0x7E
+#define KS_TXQCR                                0x80
+#define TXQCR_AETFE                             (1 << 2)
+#define TXQCR_TXQMAM                            (1 << 1)
+#define TXQCR_METFE                             (1 << 0)
+
+#define KS_RXQCR                                0x82
+#define RXQCR_RXDTTS                            (1 << 12)
+#define RXQCR_RXDBCTS                           (1 << 11)
+#define RXQCR_RXFCTS                            (1 << 10)
+#define RXQCR_RXIPHTOE                          (1 << 9)
+#define RXQCR_RXDTTE                            (1 << 7)
+#define RXQCR_RXDBCTE                           (1 << 6)
+#define RXQCR_RXFCTE                            (1 << 5)
+#define RXQCR_ADRFE                             (1 << 4)
+#define RXQCR_SDA                               (1 << 3)
+#define RXQCR_RRXEF                             (1 << 0)
+
+#define KS_TXFDPR                               0x84
+#define TXFDPR_TXFPAI                           (1 << 14)
+#define TXFDPR_TXFP_MASK                        (0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT                       (0)
+
+#define KS_RXFDPR                               0x86
+#define RXFDPR_RXFPAI                           (1 << 14)
+
+#define KS_RXDTTR                               0x8C
+#define KS_RXDBCTR                              0x8E
+
+#define KS_IER                                  0x90
+#define KS_ISR                                  0x92
+#define IRQ_LCI                                 (1 << 15)
+#define IRQ_TXI                                 (1 << 14)
+#define IRQ_RXI                                 (1 << 13)
+#define IRQ_RXOI                                (1 << 11)
+#define IRQ_TXPSI                               (1 << 9)
+#define IRQ_RXPSI                               (1 << 8)
+#define IRQ_TXSAI                               (1 << 6)
+#define IRQ_RXWFDI                              (1 << 5)
+#define IRQ_RXMPDI                              (1 << 4)
+#define IRQ_LDI                                 (1 << 3)
+#define IRQ_EDI                                 (1 << 2)
+#define IRQ_SPIBEI                              (1 << 1)
+#define IRQ_DEDI                                (1 << 0)
+
+#define KS_RXFCTR                               0x9C
+#define KS_RXFC                                 0x9D
+#define RXFCTR_RXFC_MASK                        (0xff << 8)
+#define RXFCTR_RXFC_SHIFT                       (8)
+#define RXFCTR_RXFC_GET(_v)                     (((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK                       (0xff << 0)
+#define RXFCTR_RXFCT_SHIFT                      (0)
+
+#define KS_TXNTFSR                              0x9E
+
+#define KS_MAHTR0                               0xA0
+#define KS_MAHTR1                               0xA2
+#define KS_MAHTR2                               0xA4
+#define KS_MAHTR3                               0xA6
+
+#define KS_FCLWR                                0xB0
+#define KS_FCHWR                                0xB2
+#define KS_FCOWR                                0xB4
+
+#define KS_CIDER                                0xC0
+#define CIDER_ID                                0x8870
+#define CIDER_REV_MASK                          (0x7 << 1)
+#define CIDER_REV_SHIFT                         (1)
+#define CIDER_REV_GET(_v)                       (((_v) >> 1) & 0x7)
+
+#define KS_CGCR                                 0xC6
+
+#define KS_IACR                                 0xC8
+#define IACR_RDEN                               (1 << 12)
+#define IACR_TSEL_MASK                          (0x3 << 10)
+#define IACR_TSEL_SHIFT                         (10)
+#define IACR_TSEL_MIB                           (0x3 << 10)
+#define IACR_ADDR_MASK                          (0x1f << 0)
+#define IACR_ADDR_SHIFT                         (0)
+
+#define KS_IADLR                                0xD0
+#define KS_IAHDR                                0xD2
+
+#define KS_PMECR                                0xD4
+#define PMECR_PME_DELAY                         (1 << 14)
+#define PMECR_PME_POL                           (1 << 12)
+#define PMECR_WOL_WAKEUP                        (1 << 11)
+#define PMECR_WOL_MAGICPKT                      (1 << 10)
+#define PMECR_WOL_LINKUP                        (1 << 9)
+#define PMECR_WOL_ENERGY                        (1 << 8)
+#define PMECR_AUTO_WAKE_EN                      (1 << 7)
+#define PMECR_WAKEUP_NORMAL                     (1 << 6)
+#define PMECR_WKEVT_MASK                        (0xf << 2)
+#define PMECR_WKEVT_SHIFT                       (2)
+#define PMECR_WKEVT_GET(_v)                     (((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY                      (0x1 << 2)
+#define PMECR_WKEVT_LINK                        (0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT                    (0x4 << 2)
+#define PMECR_WKEVT_FRAME                       (0x8 << 2)
+#define PMECR_PM_MASK                           (0x3 << 0)
+#define PMECR_PM_SHIFT                          (0)
+#define PMECR_PM_NORMAL                         (0x0 << 0)
+#define PMECR_PM_ENERGY                         (0x1 << 0)
+#define PMECR_PM_SOFTDOWN                       (0x2 << 0)
+#define PMECR_PM_POWERSAVE                      (0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR                               0xE4
+#define KS_P1MBSR                               0xE6
+#define KS_PHY1ILR                              0xE8
+#define KS_PHY1IHR                              0xEA
+#define KS_P1ANAR                               0xEC
+#define KS_P1ANLPR                              0xEE
+
+#define KS_P1SCLMD                              0xF4
+#define P1SCLMD_LEDOFF                          (1 << 15)
+#define P1SCLMD_TXIDS                           (1 << 14)
+#define P1SCLMD_RESTARTAN                       (1 << 13)
+#define P1SCLMD_DISAUTOMDIX                     (1 << 10)
+#define P1SCLMD_FORCEMDIX                       (1 << 9)
+#define P1SCLMD_AUTONEGEN                       (1 << 7)
+#define P1SCLMD_FORCE100                        (1 << 6)
+#define P1SCLMD_FORCEFDX                        (1 << 5)
+#define P1SCLMD_ADV_FLOW                        (1 << 4)
+#define P1SCLMD_ADV_100BT_FDX                   (1 << 3)
+#define P1SCLMD_ADV_100BT_HDX                   (1 << 2)
+#define P1SCLMD_ADV_10BT_FDX                    (1 << 1)
+#define P1SCLMD_ADV_10BT_HDX                    (1 << 0)
+
+#define KS_P1CR                                 0xF6
+#define P1CR_HP_MDIX                            (1 << 15)
+#define P1CR_REV_POL                            (1 << 13)
+#define P1CR_OP_100M                            (1 << 10)
+#define P1CR_OP_FDX                             (1 << 9)
+#define P1CR_OP_MDI                             (1 << 7)
+#define P1CR_AN_DONE                            (1 << 6)
+#define P1CR_LINK_GOOD                          (1 << 5)
+#define P1CR_PNTR_FLOW                          (1 << 4)
+#define P1CR_PNTR_100BT_FDX                     (1 << 3)
+#define P1CR_PNTR_100BT_HDX                     (1 << 2)
+#define P1CR_PNTR_10BT_FDX                      (1 << 1)
+#define P1CR_PNTR_10BT_HDX                      (1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC                               (1 << 15)
+#define TXFR_TXFID_MASK                         (0x3f << 0)
+#define TXFR_TXFID_SHIFT                        (0)
+
+/* SPI frame opcodes */
+#define KS_SPIOP_RD                             (0x00)
+#define KS_SPIOP_WR                             (0x40)
+#define KS_SPIOP_RXFIFO                         (0x80)
+#define KS_SPIOP_TXFIFO                         (0xC0)
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index acd143da161d..61eabcac734c 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -179,7 +179,7 @@ static const struct net_device_ops macsonic_netdev_ops = {
         .ndo_set_mac_address    = eth_mac_addr,
 };
 
-static int __init macsonic_init(struct net_device *dev)
+static int __devinit macsonic_init(struct net_device *dev)
 {
         struct sonic_local* lp = netdev_priv(dev);
 
@@ -223,7 +223,7 @@ static int __init macsonic_init(struct net_device *dev)
         return 0;
 }
 
-static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
 {
         struct sonic_local *lp = netdev_priv(dev);
         const int prom_addr = ONBOARD_SONIC_PROM_BASE;
@@ -288,7 +288,7 @@ static int __init mac_onboard_sonic_ethernet_addr(struct net_device *dev)
         } else return 0;
 }
 
-static int __init mac_onboard_sonic_probe(struct net_device *dev)
+static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
 {
         /* Bwahahaha */
         static int once_is_more_than_enough;
@@ -409,7 +409,7 @@ static int __init mac_onboard_sonic_probe(struct net_device *dev)
         return macsonic_init(dev);
 }
 
-static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
+static int __devinit mac_nubus_sonic_ethernet_addr(struct net_device *dev,
                                                 unsigned long prom_addr,
                                                 int id)
 {
@@ -424,7 +424,7 @@ static int __init mac_nubus_sonic_ethernet_addr(struct net_device *dev,
         return 0;
 }
 
-static int __init macsonic_ident(struct nubus_dev *ndev)
+static int __devinit macsonic_ident(struct nubus_dev *ndev)
 {
         if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC &&
             ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
@@ -449,7 +449,7 @@ static int __init macsonic_ident(struct nubus_dev *ndev)
         return -1;
 }
 
-static int __init mac_nubus_sonic_probe(struct net_device *dev)
+static int __devinit mac_nubus_sonic_probe(struct net_device *dev)
 {
         static int slots;
         struct nubus_dev* ndev = NULL;
@@ -562,7 +562,7 @@ static int __init mac_nubus_sonic_probe(struct net_device *dev)
         return macsonic_init(dev);
 }
 
-static int __init mac_sonic_probe(struct platform_device *pdev)
+static int __devinit mac_sonic_probe(struct platform_device *pdev)
 {
         struct net_device *dev;
         struct sonic_local *lp;
@@ -575,6 +575,7 @@ static int __init mac_sonic_probe(struct platform_device *pdev)
         lp = netdev_priv(dev);
         lp->device = &pdev->dev;
         SET_NETDEV_DEV(dev, &pdev->dev);
+        platform_set_drvdata(pdev, dev);
 
         /* This will catch fatal stuff like -ENOMEM as well as success */
         err = mac_onboard_sonic_probe(dev);
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index 2845a0560b84..65ec77dc31f5 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -80,7 +80,9 @@ enum {
         /* Bad management packet (silently discarded): */
         CMD_STAT_BAD_PKT        = 0x30,
         /* More outstanding CQEs in CQ than new CQ size: */
-        CMD_STAT_BAD_SIZE       = 0x40
+        CMD_STAT_BAD_SIZE       = 0x40,
+        /* Multi Function device support required: */
+        CMD_STAT_MULTI_FUNC_REQ = 0x50,
 };
 
 enum {
@@ -128,6 +130,7 @@ static int mlx4_status_to_errno(u8 status)
                 [CMD_STAT_LAM_NOT_PRE]    = -EAGAIN,
                 [CMD_STAT_BAD_PKT]        = -EINVAL,
                 [CMD_STAT_BAD_SIZE]       = -ENOMEM,
+                [CMD_STAT_MULTI_FUNC_REQ] = -EACCES,
         };
 
         if (status >= ARRAY_SIZE(trans_table) ||
diff --git a/drivers/net/mlx4/en_ethtool.c b/drivers/net/mlx4/en_ethtool.c
index 091f99052c91..86467b444ac6 100644
--- a/drivers/net/mlx4/en_ethtool.c
+++ b/drivers/net/mlx4/en_ethtool.c
@@ -220,7 +220,7 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
         cmd->autoneg = AUTONEG_DISABLE;
         cmd->supported = SUPPORTED_10000baseT_Full;
-        cmd->advertising = SUPPORTED_10000baseT_Full;
+        cmd->advertising = ADVERTISED_1000baseT_Full;
         if (netif_carrier_ok(dev)) {
                 cmd->speed = SPEED_10000;
                 cmd->duplex = DUPLEX_FULL;
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 018348c01193..dac621b1e9fc 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -729,7 +729,10 @@ static int mlx4_init_hca(struct mlx4_dev *dev)
 
         err = mlx4_QUERY_FW(dev);
         if (err) {
-                mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
+                if (err == -EACCES)
+                        mlx4_info(dev, "non-primary physical function, skipping.\n");
+                else
+                        mlx4_err(dev, "QUERY_FW command failed, aborting.\n");
                 return err;
         }
 
@@ -1285,6 +1288,7 @@ static struct pci_device_id mlx4_pci_table[] = {
         { PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */
         { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
         { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
+        { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
         { 0, }
 };
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index e1cdba752e09..f86e05047d19 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -210,6 +210,7 @@
 #define NETXEN_CTX_SIGNATURE    0xdee0
 #define NETXEN_CTX_SIGNATURE_V2 0x0002dee0
 #define NETXEN_CTX_RESET        0xbad0
+#define NETXEN_CTX_D3_RESET     0xacc0
 #define NETXEN_RCV_PRODUCER(ringid)     (ringid)
 
 #define PHAN_PEG_RCV_INITIALIZED        0xff01
@@ -773,6 +774,8 @@ struct nx_host_tx_ring {
         u32 crb_cmd_consumer;
         u32 num_desc;
 
+        struct netdev_queue *txq;
+
         struct netxen_cmd_buffer *cmd_buf_arr;
         struct cmd_desc_type0 *desc_head;
         dma_addr_t phys_addr;
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 4754f5cffad0..9f8ae4719e2f 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -684,10 +684,8 @@ int netxen_alloc_hw_resources(struct netxen_adapter *adapter)
                         goto err_out_free;
         } else {
                 err = netxen_init_old_ctx(adapter);
-                if (err) {
-                        netxen_free_hw_resources(adapter);
-                        return err;
-                }
+                if (err)
+                        goto err_out_free;
         }
 
         return 0;
@@ -708,15 +706,18 @@ void netxen_free_hw_resources(struct netxen_adapter *adapter)
         int port = adapter->portnum;
 
         if (adapter->fw_major >= 4) {
-                nx_fw_cmd_destroy_tx_ctx(adapter);
                 nx_fw_cmd_destroy_rx_ctx(adapter);
+                nx_fw_cmd_destroy_tx_ctx(adapter);
         } else {
                 netxen_api_lock(adapter);
                 NXWR32(adapter, CRB_CTX_SIGNATURE_REG(port),
-                                NETXEN_CTX_RESET | port);
+                                NETXEN_CTX_D3_RESET | port);
                 netxen_api_unlock(adapter);
         }
 
+        /* Allow dma queues to drain after context reset */
+        msleep(20);
+
         recv_ctx = &adapter->recv_ctx;
 
         if (recv_ctx->hwctx != NULL) {
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index ce3b89d2cbb6..b9123d445c96 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -461,13 +461,14 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
         i = 0;
 
         tx_ring = adapter->tx_ring;
-        netif_tx_lock_bh(adapter->netdev);
+        __netif_tx_lock_bh(tx_ring->txq);
 
         producer = tx_ring->producer;
         consumer = tx_ring->sw_consumer;
 
-        if (nr_desc >= find_diff_among(producer, consumer, tx_ring->num_desc)) {
-                netif_tx_unlock_bh(adapter->netdev);
+        if (nr_desc >= netxen_tx_avail(tx_ring)) {
+                netif_tx_stop_queue(tx_ring->txq);
+                __netif_tx_unlock_bh(tx_ring->txq);
                 return -EBUSY;
         }
 
@@ -490,7 +491,7 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
         netxen_nic_update_cmd_producer(adapter, tx_ring);
 
-        netif_tx_unlock_bh(adapter->netdev);
+        __netif_tx_unlock_bh(tx_ring->txq);
 
         return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index b899bd51fcd8..7acf204e38c9 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -184,6 +184,13 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter)
         kfree(recv_ctx->rds_rings);
 
 skip_rds:
+        if (recv_ctx->sds_rings == NULL)
+                goto skip_sds;
+
+        for(ring = 0; ring < adapter->max_sds_rings; ring++)
+                recv_ctx->sds_rings[ring].consumer = 0;
+
+skip_sds:
         if (adapter->tx_ring == NULL)
                 return;
 
@@ -214,6 +221,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
         adapter->tx_ring = tx_ring;
 
         tx_ring->num_desc = adapter->num_txd;
+        tx_ring->txq = netdev_get_tx_queue(netdev, 0);
 
         cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
         if (cmd_buf_arr == NULL) {
@@ -1400,10 +1408,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter)
                 smp_mb();
 
                 if (netif_queue_stopped(netdev) && netif_carrier_ok(netdev)) {
-                        netif_tx_lock(netdev);
+                        __netif_tx_lock(tx_ring->txq, smp_processor_id());
                         if (netxen_tx_avail(tx_ring) > TX_STOP_THRESH)
                                 netif_wake_queue(netdev);
-                        netif_tx_unlock(netdev);
+                        __netif_tx_unlock(tx_ring->txq);
                 }
         }
         /*
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 27539ddf94c4..637ac8b89bac 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -215,9 +215,9 @@ netxen_napi_disable(struct netxen_adapter *adapter)
 
         for (ring = 0; ring < adapter->max_sds_rings; ring++) {
                 sds_ring = &recv_ctx->sds_rings[ring];
-                napi_disable(&sds_ring->napi);
                 netxen_nic_disable_int(sds_ring);
-                synchronize_irq(sds_ring->irq);
+                napi_synchronize(&sds_ring->napi);
+                napi_disable(&sds_ring->napi);
         }
 }
 
@@ -833,11 +833,11 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 
         adapter->ahw.linkup = 0;
 
-        netxen_napi_enable(adapter);
-
         if (adapter->max_sds_rings > 1)
                 netxen_config_rss(adapter, 1);
 
+        netxen_napi_enable(adapter);
+
         if (adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)
                 netxen_linkevent_request(adapter, 1);
         else
@@ -851,8 +851,9 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 static void
 netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
 {
+        spin_lock(&adapter->tx_clean_lock);
         netif_carrier_off(netdev);
-        netif_stop_queue(netdev);
+        netif_tx_disable(netdev);
 
         if (adapter->stop_port)
                 adapter->stop_port(adapter);
@@ -863,9 +864,10 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev)
         netxen_napi_disable(adapter);
 
         netxen_release_tx_buffers(adapter);
+        spin_unlock(&adapter->tx_clean_lock);
 
-        FLUSH_SCHEDULED_WORK();
         del_timer_sync(&adapter->watchdog_timer);
+        FLUSH_SCHEDULED_WORK();
 }
 
 
@@ -943,8 +945,8 @@ err_out_free_sw:
 static void
 netxen_nic_detach(struct netxen_adapter *adapter)
 {
-        netxen_release_rx_buffers(adapter);
         netxen_free_hw_resources(adapter);
+        netxen_release_rx_buffers(adapter);
         netxen_nic_free_irq(adapter);
         netxen_free_sw_resources(adapter);
 
@@ -1533,10 +1535,12 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
                 printk(KERN_ALERT
                        "%s: Device temperature %d degrees C exceeds"
                        " maximum allowed. Hardware has been shut down.\n",
-                       netxen_nic_driver_name, temp_val);
+                       netdev->name, temp_val);
+
+                netif_device_detach(netdev);
+                netxen_nic_down(adapter, netdev);
+                netxen_nic_detach(adapter);
 
-                netif_carrier_off(netdev);
-                netif_stop_queue(netdev);
                 rv = 1;
         } else if (temp_state == NX_TEMP_WARN) {
                 if (adapter->temp == NX_TEMP_NORMAL) {
@@ -1544,13 +1548,13 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter)
                                "%s: Device temperature %d degrees C "
                                "exceeds operating range."
                                " Immediate action needed.\n",
-                               netxen_nic_driver_name, temp_val);
+                               netdev->name, temp_val);
                 }
         } else {
                 if (adapter->temp == NX_TEMP_WARN) {
                         printk(KERN_INFO
                                "%s: Device temperature is now %d degrees C"
-                               " in normal range.\n", netxen_nic_driver_name,
+                               " in normal range.\n", netdev->name,
                                temp_val);
                 }
         }
@@ -1623,7 +1627,7 @@ void netxen_watchdog_task(struct work_struct *work)
         struct netxen_adapter *adapter =
                 container_of(work, struct netxen_adapter, watchdog_task);
 
-        if ((adapter->portnum  == 0) && netxen_nic_check_temp(adapter))
+        if (netxen_nic_check_temp(adapter))
                 return;
 
         if (!adapter->has_link_events)
@@ -1645,6 +1649,9 @@ static void netxen_tx_timeout_task(struct work_struct *work)
         struct netxen_adapter *adapter =
                 container_of(work, struct netxen_adapter, tx_timeout_task);
 
+        if (!netif_running(adapter->netdev))
+                return;
+
         printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
                netxen_nic_driver_name, adapter->netdev->name);
 
@@ -1757,7 +1764,8 @@ static int netxen_nic_poll(struct napi_struct *napi, int budget)
 
         if ((work_done < budget) && tx_complete) {
                 napi_complete(&sds_ring->napi);
-                netxen_nic_enable_int(sds_ring);
+                if (netif_running(adapter->netdev))
+                        netxen_nic_enable_int(sds_ring);
         }
 
         return work_done;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index ec7cf5ac4f05..690b9c76d34e 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -156,6 +156,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev);
 static int el3_rx(struct net_device *dev);
 static int el3_close(struct net_device *dev);
 static void el3_tx_timeout(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
 static void set_multicast_list(struct net_device *dev);
 static const struct ethtool_ops netdev_ethtool_ops;
 
@@ -488,8 +489,7 @@ static void tc589_reset(struct net_device *dev)
     /* Switch to register set 1 for normal use. */
     EL3WINDOW(1);
 
-    /* Accept b-cast and phys addr only. */
-    outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+    set_rx_mode(dev);
     outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
     outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
     outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
@@ -700,7 +700,7 @@ static irqreturn_t el3_interrupt(int irq, void *dev_id)
                 if (fifo_diag & 0x2000) {
                     /* Rx underrun */
                     tc589_wait_for_completion(dev, RxReset);
-                    set_multicast_list(dev);
+                    set_rx_mode(dev);
                     outw(RxEnable, ioaddr + EL3_CMD);
                 }
                 outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
@@ -905,14 +905,11 @@ static int el3_rx(struct net_device *dev)
     return 0;
 }
 
-static void set_multicast_list(struct net_device *dev)
+static void set_rx_mode(struct net_device *dev)
 {
-    struct el3_private *lp = netdev_priv(dev);
-    struct pcmcia_device *link = lp->p_dev;
     unsigned int ioaddr = dev->base_addr;
     u16 opts = SetRxFilter | RxStation | RxBroadcast;
 
-    if (!pcmcia_dev_present(link)) return;
     if (dev->flags & IFF_PROMISC)
         opts |= RxMulticast | RxProm;
     else if (dev->mc_count || (dev->flags & IFF_ALLMULTI))
@@ -920,6 +917,16 @@ static void set_multicast_list(struct net_device *dev)
     outw(opts, ioaddr + EL3_CMD);
 }
 
+static void set_multicast_list(struct net_device *dev)
+{
+        struct el3_private *priv = netdev_priv(dev);
+        unsigned long flags;
+
+        spin_lock_irqsave(&priv->lock, flags);
+        set_rx_mode(dev);
+        spin_unlock_irqrestore(&priv->lock, flags);
+}
+
 static int el3_close(struct net_device *dev)
 {
     struct el3_private *lp = netdev_priv(dev);
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 33984b737233..22cdd451fb82 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -30,6 +30,7 @@
 
 #ifdef CONFIG_OF_GPIO
 #include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #endif
 
@@ -81,13 +82,12 @@ static struct mdiobb_ops mdio_gpio_ops = {
         .get_mdio_data = mdio_get,
 };
 
-static int __devinit mdio_gpio_bus_init(struct device *dev,
+static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev,
                                         struct mdio_gpio_platform_data *pdata,
                                         int bus_id)
 {
         struct mii_bus *new_bus;
         struct mdio_gpio_info *bitbang;
-        int ret = -ENOMEM;
         int i;
 
         bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
@@ -104,8 +104,6 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
         new_bus->name = "GPIO Bitbanged MDIO",
 
-        ret = -ENODEV;
-
         new_bus->phy_mask = pdata->phy_mask;
         new_bus->irq = pdata->irqs;
         new_bus->parent = dev;
@@ -129,15 +127,8 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
         dev_set_drvdata(dev, new_bus);
 
-        ret = mdiobus_register(new_bus);
-        if (ret)
-                goto out_free_all;
-
-        return 0;
+        return new_bus;
 
-out_free_all:
-        dev_set_drvdata(dev, NULL);
-        gpio_free(bitbang->mdio);
 out_free_mdc:
         gpio_free(bitbang->mdc);
 out_free_bus:
@@ -145,30 +136,47 @@ out_free_bus:
 out_free_bitbang:
         kfree(bitbang);
 out:
-        return ret;
+        return NULL;
 }
 
-static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+static void __devinit mdio_gpio_bus_deinit(struct device *dev)
 {
         struct mii_bus *bus = dev_get_drvdata(dev);
         struct mdio_gpio_info *bitbang = bus->priv;
 
-        mdiobus_unregister(bus);
-        free_mdio_bitbang(bus);
         dev_set_drvdata(dev, NULL);
-        gpio_free(bitbang->mdc);
         gpio_free(bitbang->mdio);
+        gpio_free(bitbang->mdc);
+        free_mdio_bitbang(bus);
         kfree(bitbang);
 }
 
+static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+{
+        struct mii_bus *bus = dev_get_drvdata(dev);
+
+        mdiobus_unregister(bus);
+        mdio_gpio_bus_deinit(dev);
+}
+
 static int __devinit mdio_gpio_probe(struct platform_device *pdev)
 {
         struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+        struct mii_bus *new_bus;
+        int ret;
 
         if (!pdata)
                 return -ENODEV;
 
-        return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+        new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+        if (!new_bus)
+                return -ENODEV;
+
+        ret = mdiobus_register(new_bus);
+        if (ret)
+                mdio_gpio_bus_deinit(&pdev->dev);
+
+        return ret;
 }
 
 static int __devexit mdio_gpio_remove(struct platform_device *pdev)
@@ -179,29 +187,12 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_OF_GPIO
-static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
-                              struct device_node *np)
-{
-        const u32 *data;
-        int len, id, irq;
-
-        data = of_get_property(np, "reg", &len);
-        if (!data || len != 4)
-                return;
-
-        id = *data;
-        pdata->phy_mask &= ~(1 << id);
-
-        irq = of_irq_to_resource(np, 0, NULL);
-        if (irq)
-                pdata->irqs[id] = irq;
-}
 
 static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-        struct device_node *np = NULL;
         struct mdio_gpio_platform_data *pdata;
+        struct mii_bus *new_bus;
         int ret;
 
         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
@@ -215,14 +206,18 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
 
         ret = of_get_gpio(ofdev->node, 1);
         if (ret < 0)
-                goto out_free;
+                goto out_free;
         pdata->mdio = ret;
 
-        while ((np = of_get_next_child(ofdev->node, np)))
-                if (!strcmp(np->type, "ethernet-phy"))
-                        add_phy(pdata, np);
+        new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+        if (!new_bus)
+                return -ENODEV;
 
-        return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+        ret = of_mdiobus_register(new_bus, ofdev->node);
+        if (ret)
+                mdio_gpio_bus_deinit(&ofdev->dev);
+
+        return ret;
 
 out_free:
         kfree(pdata);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index eba937c46376..b10fedd82143 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -134,8 +134,10 @@ int phy_scan_fixups(struct phy_device *phydev)
 
                         err = fixup->run(phydev);
 
-                        if (err < 0)
+                        if (err < 0) {
+                                mutex_unlock(&phy_fixup_lock);
                                 return err;
+                        }
                 }
         }
         mutex_unlock(&phy_fixup_lock);
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 7a62f781fef2..2ca8b0d84ee2 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -270,6 +270,9 @@ static const struct net_device_ops plip_netdev_ops = {
         .ndo_stop                = plip_close,
         .ndo_start_xmit          = plip_tx_packet,
         .ndo_do_ioctl            = plip_ioctl,
+        .ndo_change_mtu          = eth_change_mtu,
+        .ndo_set_mac_address     = eth_mac_addr,
+        .ndo_validate_addr       = eth_validate_addr,
 };
 
 /* Entry point of PLIP driver.
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 17c116bb332c..6de8399d6dd9 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -356,6 +356,7 @@ ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
         if (!skb_queue_empty(&ap->rqueue))
                 tasklet_schedule(&ap->tsk);
         ap_put(ap);
+        tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index aa3d39f38e22..d2fa2db13586 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -397,6 +397,7 @@ ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf,
         if (!skb_queue_empty(&ap->rqueue))
                 tasklet_schedule(&ap->tsk);
         sp_put(ap);
+        tty_unthrottle(tty);
 }
 
 static void
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index d1a5fb4d6acb..a3932c9f3406 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -1411,6 +1411,7 @@ static const struct net_device_ops gelic_netdevice_ops = {
         .ndo_set_multicast_list = gelic_net_set_multi,
         .ndo_change_mtu = gelic_net_change_mtu,
         .ndo_tx_timeout = gelic_net_tx_timeout,
+        .ndo_set_mac_address = eth_mac_addr,
         .ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
         .ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index b6b3ca9bdb21..6932b08d746b 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2707,6 +2707,7 @@ static const struct net_device_ops gelic_wl_netdevice_ops = {
         .ndo_set_multicast_list = gelic_net_set_multi,
         .ndo_change_mtu = gelic_net_change_mtu,
         .ndo_tx_timeout = gelic_net_tx_timeout,
+        .ndo_set_mac_address = eth_mac_addr,
         .ndo_validate_addr = eth_validate_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
         .ndo_poll_controller = gelic_net_poll_controller,
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4b53b58d75fc..b82780d805f5 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2060,8 +2060,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                 }
         }
 
-        pci_set_master(pdev);
-
         /* ioremap MMIO region */
         ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
         if (!ioaddr) {
@@ -2089,6 +2087,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
         RTL_W16(IntrStatus, 0xffff);
 
+        pci_set_master(pdev);
+
         /* Identify chip attached to board */
         rtl8169_get_mac_version(tp, ioaddr);
 
@@ -3874,6 +3874,15 @@ static void rtl_shutdown(struct pci_dev *pdev)
         spin_unlock_irq(&tp->lock);
 
         if (system_state == SYSTEM_POWER_OFF) {
+                /* WoL fails with some 8168 when the receiver is disabled. */
+                if (tp->features & RTL_FEATURE_WOL) {
+                        pci_clear_master(pdev);
+
+                        RTL_W8(ChipCmd, CmdRxEnb);
+                        /* PCI commit */
+                        RTL_R8(ChipCmd);
+                }
+
                 pci_wake_from_d3(pdev, true);
                 pci_set_power_state(pdev, PCI_D3hot);
         }
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 18821f217e19..e3156c97bb58 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1593,6 +1593,7 @@ out:
 static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
         { PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x2031) },
         { PCI_DEVICE(PCI_VENDOR_ID_SILAN, 0x8139) },
+        { PCI_DEVICE(0x1088, 0x2031) },
         { 0, }
 };
 MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 60d502eef4fc..543af2044f40 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3854,8 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
         skge->speed = -1;
         skge->advertising = skge_supported_modes(hw);
 
-        if (device_may_wakeup(&hw->pdev->dev))
+        if (device_can_wakeup(&hw->pdev->dev)) {
                 skge->wol = wol_supported(hw) & WAKE_MAGIC;
+                device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+        }
 
         hw->dev[port] = dev;
 
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index daf961ab68bc..3550c5dcd93c 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1151,14 +1151,7 @@ stopped:
 
         /* reset the Rx prefetch unit */
         sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
-
-        /* Reset the RAM Buffer receive queue */
-        sky2_write8(hw, RB_ADDR(rxq, RB_CTRL), RB_RST_SET);
-
-        /* Reset Rx MAC FIFO */
-        sky2_write8(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), GMF_RST_SET);
-
-        sky2_read8(hw, B0_CTST);
+        mmiowb();
 }
 
 /* Clean out receive buffer area, assumes receiver hardware stopped */
@@ -1825,12 +1818,6 @@ static int sky2_down(struct net_device *dev)
         if (netif_msg_ifdown(sky2))
                 printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
-        /* Disable port IRQ */
-        imask = sky2_read32(hw, B0_IMSK);
-        imask &= ~portirq_msk[port];
-        sky2_write32(hw, B0_IMSK, imask);
-        sky2_read32(hw, B0_IMSK);
-
         /* Force flow control off */
         sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
 
@@ -1870,8 +1857,6 @@ static int sky2_down(struct net_device *dev)
 
         sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET);
 
-        sky2_rx_stop(sky2);
-
         sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
         sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
 
@@ -1881,6 +1866,14 @@ static int sky2_down(struct net_device *dev)
         sky2_write32(hw, STAT_ISR_TIMER_CNT, 0);
         sky2_read8(hw, STAT_ISR_TIMER_CTRL);
 
+        sky2_rx_stop(sky2);
+
+        /* Disable port IRQ */
+        imask = sky2_read32(hw, B0_IMSK);
+        imask &= ~portirq_msk[port];
+        sky2_write32(hw, B0_IMSK, imask);
+        sky2_read32(hw, B0_IMSK);
+
         synchronize_irq(hw->pdev->irq);
         napi_synchronize(&hw->napi);
 
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index fdcbaf8dfa73..1c70e999cc50 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1774,6 +1774,7 @@ static const struct net_device_ops smc_netdev_ops = {
         .ndo_start_xmit         = smc_hard_start_xmit,
         .ndo_tx_timeout         = smc_timeout,
         .ndo_set_multicast_list = smc_set_multicast_list,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_validate_addr      = eth_validate_addr,
         .ndo_set_mac_address    = eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f1f773b17fe1..57a159fac99f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -186,7 +186,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_outsb(a, r, p, l)   writesb((a) + (r), p, (l))
 #define SMC_IRQ_FLAGS           (-1)    /* from resource */
 
-#elif   defined(CONFIG_MACH_LOGICPD_PXA270)
+#elif   defined(CONFIG_MACH_LOGICPD_PXA270) \
+        || defined(CONFIG_MACH_NOMADIK_8815NHK)
 
 #define SMC_CAN_USE_8BIT        0
 #define SMC_CAN_USE_16BIT       1
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 66067f9d91c0..94b6d2658ddc 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1779,6 +1779,7 @@ static const struct net_device_ops smsc911x_netdev_ops = {
         .ndo_get_stats          = smsc911x_get_stats,
         .ndo_set_multicast_list = smsc911x_set_multicast_list,
         .ndo_do_ioctl           = smsc911x_do_ioctl,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_validate_addr      = eth_validate_addr,
         .ndo_set_mac_address    = smsc911x_set_mac_address,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/sunvnet.c b/drivers/net/sunvnet.c
index a82fb2aca4cb..f1e5e4542c2a 100644
--- a/drivers/net/sunvnet.c
+++ b/drivers/net/sunvnet.c
@@ -1016,7 +1016,9 @@ static const struct net_device_ops vnet_ops = {
         .ndo_open               = vnet_open,
         .ndo_stop               = vnet_close,
         .ndo_set_multicast_list = vnet_set_rx_mode,
+        .ndo_change_mtu         = eth_change_mtu,
         .ndo_set_mac_address    = vnet_set_mac_addr,
+        .ndo_validate_addr      = eth_validate_addr,
         .ndo_tx_timeout         = vnet_tx_timeout,
         .ndo_change_mtu         = vnet_change_mtu,
         .ndo_start_xmit         = vnet_start_xmit,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 9d896116cf76..08a6c41c1599 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1912,7 +1912,7 @@ static int __init ibmtr_init(void)
 
         find_turbo_adapters(io);
 
-        for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) {
+        for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) {
                 struct net_device *dev;
                 irq[i] = 0;
                 mem[i] = 0;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 40c6eba775ce..3b957e6412ee 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1590,13 +1590,13 @@ static int init_phy(struct net_device *dev)
         priv->oldspeed = 0;
         priv->oldduplex = -1;
 
-        if (!ug_info->phy_node)
-                return 0;
-
         phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
                                 priv->phy_interface);
+        if (!phydev)
+                phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+                                                   priv->phy_interface);
         if (!phydev) {
-                printk("%s: Could not attach to PHY\n", dev->name);
+                dev_err(&dev->dev, "Could not attach to PHY\n");
                 return -ENODEV;
         }
 
@@ -3608,9 +3608,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
         struct ucc_geth_private *ugeth = NULL;
         struct ucc_geth_info *ug_info;
         struct resource res;
-        struct device_node *phy;
         int err, ucc_num, max_speed = 0;
-        const u32 *fixed_link;
         const unsigned int *prop;
         const char *sprop;
         const void *mac_addr;
@@ -3708,15 +3706,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
         ug_info->uf_info.regs = res.start;
         ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
-        fixed_link = of_get_property(np, "fixed-link", NULL);
-        if (fixed_link) {
-                phy = NULL;
-        } else {
-                phy = of_parse_phandle(np, "phy-handle", 0);
-                if (phy == NULL)
-                        return -ENODEV;
-        }
-        ug_info->phy_node = phy;
+
+        ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
 
         /* Find the TBI PHY node.  If it's not there, we don't support SGMII */
         ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -3725,7 +3716,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
         prop = of_get_property(np, "phy-connection-type", NULL);
         if (!prop) {
                 /* handle interface property present in old trees */
-                prop = of_get_property(phy, "interface", NULL);
+                prop = of_get_property(ug_info->phy_node, "interface", NULL);
                 if (prop != NULL) {
                         phy_interface = enet_to_phy_interface[*prop];
                         max_speed = enet_to_speed[*prop];
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a906d3998131..c47237c2d638 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -369,4 +369,12 @@ config USB_NET_INT51X1
           (Powerline Communications) solution with an Intellon
           INT51x1/INT5200 chip, like the "devolo dLan duo".
 
+config USB_CDC_PHONET
+        tristate "CDC Phonet support"
+        depends on PHONET
+        help
+          Choose this option to support the Phonet interface to a Nokia
+          cellular modem, as found on most Nokia handsets with the
+          "PC suite" USB profile.
+
 endmenu
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index b870b0b1cbe0..e17afb78f372 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -21,4 +21,5 @@ obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
 obj-$(CONFIG_USB_NET_MCS7830)   += mcs7830.o
 obj-$(CONFIG_USB_USBNET)        += usbnet.o
 obj-$(CONFIG_USB_NET_INT51X1)   += int51x1.o
+obj-$(CONFIG_USB_CDC_PHONET)    += cdc-phonet.o
 
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
new file mode 100644
index 000000000000..792af72da8ac
--- /dev/null
+++ b/drivers/net/usb/cdc-phonet.c
@@ -0,0 +1,461 @@
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+
+#define PN_MEDIA_USB    0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+        struct net_device       *dev;
+
+        struct usb_interface    *intf, *data_intf;
+        struct usb_device       *usb;
+        unsigned int            tx_pipe, rx_pipe;
+        u8 active_setting;
+        u8 disconnected;
+
+        unsigned                tx_queue;
+        spinlock_t              tx_lock;
+
+        spinlock_t              rx_lock;
+        struct sk_buff          *rx_skb;
+        struct urb              *urbs[0];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static int usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+        struct usbpn_dev *pnd = netdev_priv(dev);
+        struct urb *req = NULL;
+        unsigned long flags;
+        int err;
+
+        if (skb->protocol != htons(ETH_P_PHONET))
+                goto drop;
+
+        req = usb_alloc_urb(0, GFP_ATOMIC);
+        if (!req)
+                goto drop;
+        usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+                                tx_complete, skb);
+        req->transfer_flags = URB_ZERO_PACKET;
+        err = usb_submit_urb(req, GFP_ATOMIC);
+        if (err) {
+                usb_free_urb(req);
+                goto drop;
+        }
+
+        spin_lock_irqsave(&pnd->tx_lock, flags);
+        pnd->tx_queue++;
+        if (pnd->tx_queue >= dev->tx_queue_len)
+                netif_stop_queue(dev);
+        spin_unlock_irqrestore(&pnd->tx_lock, flags);
+        return 0;
+
+drop:
+        dev_kfree_skb(skb);
+        dev->stats.tx_dropped++;
+        return 0;
+}
+
+static void tx_complete(struct urb *req)
+{
+        struct sk_buff *skb = req->context;
+        struct net_device *dev = skb->dev;
+        struct usbpn_dev *pnd = netdev_priv(dev);
+
+        switch (req->status) {
+        case 0:
+                dev->stats.tx_bytes += skb->len;
+                break;
+
+        case -ENOENT:
+        case -ECONNRESET:
+        case -ESHUTDOWN:
+                dev->stats.tx_aborted_errors++;
+        default:
+                dev->stats.tx_errors++;
+                dev_dbg(&dev->dev, "TX error (%d)\n", req->status);
+        }
+        dev->stats.tx_packets++;
+
+        spin_lock(&pnd->tx_lock);
+        pnd->tx_queue--;
+        netif_wake_queue(dev);
+        spin_unlock(&pnd->tx_lock);
+
+        dev_kfree_skb_any(skb);
+        usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+        struct net_device *dev = pnd->dev;
+        struct page *page;
+        int err;
+
+        page = __netdev_alloc_page(dev, gfp_flags);
+        if (!page)
+                return -ENOMEM;
+
+        usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+                                PAGE_SIZE, rx_complete, dev);
+        req->transfer_flags = 0;
+        err = usb_submit_urb(req, gfp_flags);
+        if (unlikely(err)) {
+                dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+                netdev_free_page(dev, page);
+        }
+        return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+        struct net_device *dev = req->context;
+        struct usbpn_dev *pnd = netdev_priv(dev);
+        struct page *page = virt_to_page(req->transfer_buffer);
+        struct sk_buff *skb;
+        unsigned long flags;
+
+        switch (req->status) {
+        case 0:
+                spin_lock_irqsave(&pnd->rx_lock, flags);
+                skb = pnd->rx_skb;
+                if (!skb) {
+                        skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+                        if (likely(skb)) {
+                                /* Can't use pskb_pull() on page in IRQ */
+                                memcpy(skb_put(skb, 1), page_address(page), 1);
+                                skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+                                                page, 1, req->actual_length);
+                                page = NULL;
+                        }
+                } else {
+                        skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+                                        page, 0, req->actual_length);
+                        page = NULL;
+                }
+                if (req->actual_length < PAGE_SIZE)
+                        pnd->rx_skb = NULL; /* Last fragment */
+                else
+                        skb = NULL;
+                spin_unlock_irqrestore(&pnd->rx_lock, flags);
+                if (skb) {
+                        skb->protocol = htons(ETH_P_PHONET);
+                        skb_reset_mac_header(skb);
+                        __skb_pull(skb, 1);
+                        skb->dev = dev;
+                        dev->stats.rx_packets++;
+                        dev->stats.rx_bytes += skb->len;
+
+                        netif_rx(skb);
+                }
+                goto resubmit;
+
+        case -ENOENT:
+        case -ECONNRESET:
+        case -ESHUTDOWN:
+                req = NULL;
+                break;
+
+        case -EOVERFLOW:
+                dev->stats.rx_over_errors++;
+                dev_dbg(&dev->dev, "RX overflow\n");
+                break;
+
+        case -EILSEQ:
+                dev->stats.rx_crc_errors++;
+                break;
+        }
+
+        dev->stats.rx_errors++;
+resubmit:
+        if (page)
+                netdev_free_page(dev, page);
+        if (req)
+                rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+        struct usbpn_dev *pnd = netdev_priv(dev);
+        int err;
+        unsigned i;
+        unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+        err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+        if (err)
+                return err;
+
+        for (i = 0; i < rxq_size; i++) {
+                struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+                if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+                        usbpn_close(dev);
+                        return -ENOMEM;
+                }
+                pnd->urbs[i] = req;
+        }
+
+        netif_wake_queue(dev);
+        return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+        struct usbpn_dev *pnd = netdev_priv(dev);
+        unsigned i;
+        unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+        netif_stop_queue(dev);
+
+        for (i = 0; i < rxq_size; i++) {
+                struct urb *req = pnd->urbs[i];
+
+                if (!req)
+                        continue;
+                usb_kill_urb(req);
+                usb_free_urb(req);
+                pnd->urbs[i] = NULL;
+        }
+
+        return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_set_mtu(struct net_device *dev, int new_mtu)
+{
+        if ((new_mtu < PHONET_MIN_MTU) || (new_mtu > PHONET_MAX_MTU))
+                return -EINVAL;
+
+        dev->mtu = new_mtu;
+        return 0;
+}
+
+static const struct net_device_ops usbpn_ops = {
+        .ndo_open       = usbpn_open,
+        .ndo_stop       = usbpn_close,
+        .ndo_start_xmit = usbpn_xmit,
+        .ndo_change_mtu = usbpn_set_mtu,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+        dev->features           = 0;
+        dev->netdev_ops         = &usbpn_ops,
+        dev->header_ops         = &phonet_header_ops;
+        dev->type               = ARPHRD_PHONET;
+        dev->flags              = IFF_POINTOPOINT | IFF_NOARP;
+        dev->mtu                = PHONET_MAX_MTU;
+        dev->hard_header_len    = 1;
+        dev->dev_addr[0]        = PN_MEDIA_USB;
+        dev->addr_len           = 1;
+        dev->tx_queue_len       = 3;
+
+        dev->destructor         = free_netdev;
+}
+
+/*
+ * USB driver callbacks
+ */
+static struct usb_device_id usbpn_ids[] = {
+        {
+                .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                        | USB_DEVICE_ID_MATCH_INT_CLASS
+                        | USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+                .idVendor = 0x0421, /* Nokia */
+                .bInterfaceClass = USB_CLASS_COMM,
+                .bInterfaceSubClass = 0xFE,
+        },
+        { },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+        static const char ifname[] = "usbpn%d";
+        const struct usb_cdc_union_desc *union_header = NULL;
+        const struct usb_cdc_header_desc *phonet_header = NULL;
+        const struct usb_host_interface *data_desc;
+        struct usb_interface *data_intf;
+        struct usb_device *usbdev = interface_to_usbdev(intf);
+        struct net_device *dev;
+        struct usbpn_dev *pnd;
+        u8 *data;
+        int len, err;
+
+        data = intf->altsetting->extra;
+        len = intf->altsetting->extralen;
+        while (len >= 3) {
+                u8 dlen = data[0];
+                if (dlen < 3)
+                        return -EINVAL;
+
+                /* bDescriptorType */
+                if (data[1] == USB_DT_CS_INTERFACE) {
+                        /* bDescriptorSubType */
+                        switch (data[2]) {
+                        case USB_CDC_UNION_TYPE:
+                                if (union_header || dlen < 5)
+                                        break;
+                                union_header =
+                                        (struct usb_cdc_union_desc *)data;
+                                break;
+                        case 0xAB:
+                                if (phonet_header || dlen < 5)
+                                        break;
+                                phonet_header =
+                                        (struct usb_cdc_header_desc *)data;
+                                break;
+                        }
+                }
+                data += dlen;
+                len -= dlen;
+        }
+
+        if (!union_header || !phonet_header)
+                return -EINVAL;
+
+        data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+        if (data_intf == NULL)
+                return -ENODEV;
+        /* Data interface has one inactive and one active setting */
+        if (data_intf->num_altsetting != 2)
+                return -EINVAL;
+        if (data_intf->altsetting[0].desc.bNumEndpoints == 0
+         && data_intf->altsetting[1].desc.bNumEndpoints == 2)
+                data_desc = data_intf->altsetting + 1;
+        else
+        if (data_intf->altsetting[0].desc.bNumEndpoints == 2
+         && data_intf->altsetting[1].desc.bNumEndpoints == 0)
+                data_desc = data_intf->altsetting;
+        else
+                return -EINVAL;
+
+        dev = alloc_netdev(sizeof(*pnd) + sizeof(pnd->urbs[0]) * rxq_size,
+                                ifname, usbpn_setup);
+        if (!dev)
+                return -ENOMEM;
+
+        pnd = netdev_priv(dev);
+        SET_NETDEV_DEV(dev, &intf->dev);
+        netif_stop_queue(dev);
+
+        pnd->dev = dev;
+        pnd->usb = usb_get_dev(usbdev);
+        pnd->intf = intf;
+        pnd->data_intf = data_intf;
+        spin_lock_init(&pnd->tx_lock);
+        spin_lock_init(&pnd->rx_lock);
+        /* Endpoints */
+        if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+                pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+                        data_desc->endpoint[0].desc.bEndpointAddress);
+                pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+                        data_desc->endpoint[1].desc.bEndpointAddress);
+        } else {
+                pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+                        data_desc->endpoint[1].desc.bEndpointAddress);
+                pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+                        data_desc->endpoint[0].desc.bEndpointAddress);
+        }
+        pnd->active_setting = data_desc - data_intf->altsetting;
+
+        err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+        if (err)
+                goto out;
+
+        /* Force inactive mode until the network device is brought UP */
+        usb_set_interface(usbdev, union_header->bSlaveInterface0,
+                                !pnd->active_setting);
+        usb_set_intfdata(intf, pnd);
+
+        err = register_netdev(dev);
+        if (err) {
+                usb_driver_release_interface(&usbpn_driver, data_intf);
+                goto out;
+        }
+
+        dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+        return 0;
+
+out:
+        usb_set_intfdata(intf, NULL);
+        free_netdev(dev);
+        return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+        struct usbpn_dev *pnd = usb_get_intfdata(intf);
+        struct usb_device *usb = pnd->usb;
+
+        if (pnd->disconnected)
+                return;
+
+        pnd->disconnected = 1;
+        usb_driver_release_interface(&usbpn_driver,
+                        (pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+        unregister_netdev(pnd->dev);
+        usb_put_dev(usb);
+}
+
+static struct usb_driver usbpn_driver = {
+        .name =         "cdc_phonet",
+        .probe =        usbpn_probe,
+        .disconnect =   usbpn_disconnect,
+        .id_table =     usbpn_ids,
+};
+
+static int __init usbpn_init(void)
+{
+        return usb_register(&usbpn_driver);
+}
+
+static void __exit usbpn_exit(void)
+{
+        usb_deregister(&usbpn_driver);
+}
+
+module_init(usbpn_init);
+module_exit(usbpn_exit);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index cd35d50e46d4..45cebfb302cf 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -311,7 +311,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
                          *      bmCRC = 0       : CRC = 0xDEADBEEF
                          */
                         if (header & BIT(14))
-                                crc2 = ~crc32_le(~0, skb2->data, len);
+                                crc2 = ~crc32_le(~0, skb2->data, skb2->len);
                         else
                                 crc2 = 0xdeadbeef;
 
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e01314789718..1f9ec29fce50 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -999,6 +999,9 @@ static const struct net_device_ops kaweth_netdev_ops = {
         .ndo_tx_timeout =               kaweth_tx_timeout,
         .ndo_set_multicast_list =       kaweth_set_rx_mode,
         .ndo_get_stats =                kaweth_netdev_stats,
+        .ndo_change_mtu =               eth_change_mtu,
+        .ndo_set_mac_address =          eth_mac_addr,
+        .ndo_validate_addr =            eth_validate_addr,
 };
 
 static int kaweth_probe(
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 73acbd244aa1..631d269ac980 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1493,6 +1493,9 @@ static const struct net_device_ops pegasus_netdev_ops = {
         .ndo_set_multicast_list =       pegasus_set_multicast,
         .ndo_get_stats =                pegasus_netdev_stats,
         .ndo_tx_timeout =               pegasus_tx_timeout,
+        .ndo_change_mtu =               eth_change_mtu,
+        .ndo_set_mac_address =          eth_mac_addr,
+        .ndo_validate_addr =            eth_validate_addr,
 };
 
 static struct usb_driver pegasus_driver = {
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index d3489a3c4c03..88c30a58b4bd 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -621,6 +621,7 @@ static const struct net_device_ops rhine_netdev_ops = {
         .ndo_start_xmit          = rhine_start_tx,
         .ndo_get_stats           = rhine_get_stats,
         .ndo_set_multicast_list  = rhine_set_rx_mode,
+        .ndo_change_mtu          = eth_change_mtu,
         .ndo_validate_addr       = eth_validate_addr,
         .ndo_set_mac_address     = eth_mac_addr,
         .ndo_do_ioctl            = netdev_ioctl,
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ea045151f953..029c1bc7468f 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2970,6 +2970,9 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
         if (modparam_nohwcrypt)
                 return -EOPNOTSUPP;
 
+        if (sc->opmode == NL80211_IFTYPE_AP)
+                return -EOPNOTSUPP;
+
         switch (key->alg) {
         case ALG_WEP:
         case ALG_TKIP:
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 1aeafb511ddd..aad259b4c197 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,18 @@ void ath9k_ani_reset(struct ath_hw *ah)
                         "Reset ANI state opmode %u\n", ah->opmode);
                 ah->stats.ast_ani_reset++;
 
+                if (ah->opmode == NL80211_IFTYPE_AP) {
+                        /*
+                         * ath9k_hw_ani_control() will only process items set on
+                         * ah->ani_function
+                         */
+                        if (IS_CHAN_2GHZ(chan))
+                                ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+                                                    ATH9K_ANI_FIRSTEP_LEVEL);
+                        else
+                                ah->ani_function = 0;
+                }
+
                 ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
                 ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
                 ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index eef370bd1211..bf3d25ba7be1 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -474,6 +474,21 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
         return 0;
 }
 
+/*
+ * Some users have reported their EEPROM programmed with
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
+ */
+static void ath_regd_sanitize(struct ath_regulatory *reg)
+{
+        if (reg->current_rd != COUNTRY_ERD_FLAG)
+                return;
+        printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
+        reg->current_rd = 0x64;
+}
+
 int
 ath_regd_init(struct ath_regulatory *reg,
               struct wiphy *wiphy,
@@ -486,6 +501,8 @@ ath_regd_init(struct ath_regulatory *reg,
         if (!reg)
                 return -EINVAL;
 
+        ath_regd_sanitize(reg);
+
         printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
 
         if (!ath_regd_is_eeprom_valid(reg)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6d1519e1f011..355f50ea7fef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2675,12 +2675,10 @@ static ssize_t show_power_level(struct device *d,
                                 struct device_attribute *attr, char *buf)
 {
         struct iwl_priv *priv = dev_get_drvdata(d);
-        int mode = priv->power_data.user_power_setting;
         int level = priv->power_data.power_mode;
         char *p = buf;
 
-        p += sprintf(p, "INDEX:%d\t", level);
-        p += sprintf(p, "USER:%d\n", mode);
+        p += sprintf(p, "%d\n", level);
         return p - buf + 1;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 85ae7a62109c..9bbeec9427f0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -872,7 +872,8 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
         iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
         /* Set up entry for this TFD in Tx byte-count array */
-        priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+        if (info->flags & IEEE80211_TX_CTL_AMPDU)
+                priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
                                                      le16_to_cpu(tx_cmd->len));
 
         pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index cb9bd4c8f25e..956798f2c80c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3643,12 +3643,10 @@ static ssize_t show_power_level(struct device *d,
                                 struct device_attribute *attr, char *buf)
 {
         struct iwl_priv *priv = dev_get_drvdata(d);
-        int mode = priv->power_data.user_power_setting;
         int level = priv->power_data.power_mode;
         char *p = buf;
 
-        p += sprintf(p, "INDEX:%d\t", level);
-        p += sprintf(p, "USER:%d\n", mode);
+        p += sprintf(p, "%d\n", level);
         return p - buf + 1;
 }
 
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index aaa20c6885c8..aea5ccf24ccf 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -151,8 +151,8 @@ void iwm_if_free(struct iwm_priv *iwm)
                 return;
 
         free_netdev(iwm_to_ndev(iwm));
-        iwm_wdev_free(iwm);
         iwm_priv_deinit(iwm);
+        iwm_wdev_free(iwm);
 }
 
 int iwm_if_add(struct iwm_priv *iwm)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 01db705a38ec..685098148e10 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -135,8 +135,14 @@ int lbs_update_hw_spec(struct lbs_private *priv)
         /* Clamp region code to 8-bit since FW spec indicates that it should
          * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
          * returns non-zero high 8 bits here.
+         *
+         * Firmware version 4.0.102 used in CF8381 has region code shifted.  We
+         * need to check for this problem and handle it properly.
          */
-        priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+        if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
+                priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
+        else
+                priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
 
         for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
                 /* use the region code to search for the index */
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 48da157d6cda..72f3479a4d70 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -234,6 +234,8 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 /** Mesh enable bit in FW capability */
 #define MESH_CAPINFO_ENABLE_MASK                        (1<<16)
 
+/** FW definition from Marvell v4 */
+#define MRVL_FW_V4                                      (0x04)
 /** FW definition from Marvell v5 */
 #define MRVL_FW_V5                                      (0x05)
 /** FW definition from Marvell v10 */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index a111bda392e2..7916ca3f84c8 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -709,7 +709,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 static void mac80211_hwsim_free(void)
 {
         struct list_head tmplist, *i, *tmp;
-        struct mac80211_hwsim_data *data;
+        struct mac80211_hwsim_data *data, *tmpdata;
 
         INIT_LIST_HEAD(&tmplist);
 
@@ -718,7 +718,7 @@ static void mac80211_hwsim_free(void)
                 list_move(i, &tmplist);
         spin_unlock_bh(&hwsim_radio_lock);
 
-        list_for_each_entry(data, &tmplist, list) {
+        list_for_each_entry_safe(data, tmpdata, &tmplist, list) {
                 debugfs_remove(data->debugfs_group);
                 debugfs_remove(data->debugfs_ps);
                 debugfs_remove(data->debugfs);
@@ -1167,8 +1167,8 @@ static void __exit exit_mac80211_hwsim(void)
 {
         printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n");
 
-        unregister_netdev(hwsim_mon);
         mac80211_hwsim_free();
+        unregister_netdev(hwsim_mon);
 }
 
 
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 345593c4accb..a370e510f19f 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -2521,6 +2521,8 @@ static const struct net_device_ops orinoco_netdev_ops = {
         .ndo_start_xmit         = orinoco_xmit,
         .ndo_set_multicast_list = orinoco_set_multicast_list,
         .ndo_change_mtu         = orinoco_change_mtu,
+        .ndo_set_mac_address    = eth_mac_addr,
+        .ndo_validate_addr      = eth_validate_addr,
         .ndo_tx_timeout         = orinoco_tx_timeout,
         .ndo_get_stats          = orinoco_get_stats,
 };
@@ -2555,7 +2557,6 @@ struct net_device
         priv->wireless_data.spy_data = &priv->spy_data;
         dev->wireless_data = &priv->wireless_data;
 #endif
-        /* we use the default eth_mac_addr for setting the MAC addr */
 
         /* Reserve space in skb for the SNAP header */
         dev->hard_header_len += ENCAPS_OVERHEAD;
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 83116baeb110..72c7dbd39d0a 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -635,7 +635,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 
         hw = p54_init_common(sizeof(*priv));
         if (!hw) {
-                dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+                dev_err(&spi->dev, "could not alloc ieee80211_hw");
                 return -ENOMEM;
         }
 
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 66daf68ff0ee..ce75426764a1 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1550,7 +1550,9 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
         rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
         rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-        if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
+        if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
+            rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+
                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
                 return -ENODEV;
         }
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index b44253592243..cf9f899fe0e6 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -208,11 +208,12 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
 {
         struct rtl8187_priv *priv = dev->priv;
 
-        rtl8187_unregister_led(&priv->led_tx);
         /* turn the LED off before exiting */
         queue_delayed_work(dev->workqueue, &priv->led_off, 0);
         cancel_delayed_work_sync(&priv->led_off);
+        cancel_delayed_work_sync(&priv->led_on);
         rtl8187_unregister_led(&priv->led_rx);
+        rtl8187_unregister_led(&priv->led_tx);
 }
 #endif /* def CONFIG_RTL8187_LED */
 
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index aee967d7f760..bacaa536fd51 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -9,6 +9,10 @@
  * out of the OpenFirmware device tree and using it to populate an mii_bus.
  */
 
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/err.h>
 #include <linux/phy.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
@@ -137,3 +141,41 @@ struct phy_device *of_phy_connect(struct net_device *dev,
         return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
 }
 EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
+ * @dev: pointer to net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * This function is a temporary stop-gap and will be removed soon.  It is
+ * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers.  Do
+ * not call this function from new drivers.
+ */
+struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+                                             void (*hndlr)(struct net_device *),
+                                             phy_interface_t iface)
+{
+        struct device_node *net_np;
+        char bus_id[MII_BUS_ID_SIZE + 3];
+        struct phy_device *phy;
+        const u32 *phy_id;
+        int sz;
+
+        if (!dev->dev.parent)
+                return NULL;
+
+        net_np = dev_archdata_get_node(&dev->dev.parent->archdata);
+        if (!net_np)
+                return NULL;
+
+        phy_id = of_get_property(net_np, "fixed-link", &sz);
+        if (!phy_id || sz < sizeof(*phy_id))
+                return NULL;
+
+        sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+
+        phy = phy_connect(dev, bus_id, hndlr, 0, iface);
+        return IS_ERR(phy) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_fixed_link);
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index a5b9f6ae507b..d703e73fffa7 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -32,7 +32,6 @@
 #include <linux/pci_hotplug.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <asm/atomic.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index 2fa47af992a8..0ff689afa757 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -34,7 +34,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/wait.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
 #include <linux/kthread.h>
diff --git a/drivers/pci/hotplug/cpqphp_sysfs.c b/drivers/pci/hotplug/cpqphp_sysfs.c
index 8450f4a6568a..e6089bdb6e5b 100644
--- a/drivers/pci/hotplug/cpqphp_sysfs.c
+++ b/drivers/pci/hotplug/cpqphp_sysfs.c
@@ -33,6 +33,7 @@
 #include <linux/workqueue.h>
 #include <linux/pci.h>
 #include <linux/pci_hotplug.h>
+#include <linux/smp_lock.h>
 #include <linux/debugfs.h>
 #include "cpqphp.h"
 
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index ff4034502d24..8aab8edf123e 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -30,7 +30,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/workqueue.h>
 #include "../pci.h"
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index ec22284eed30..e1c1ec540893 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -9,7 +9,6 @@
 
 #include <linux/errno.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include "pci.h"
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index be2fd6f91639..fb45f5ee8df1 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -973,7 +973,7 @@ static int acer_rfkill_set(void *data, bool blocked)
 {
         acpi_status status;
         u32 cap = (unsigned long)data;
-        status = set_u32(!!blocked, cap);
+        status = set_u32(!blocked, cap);
         if (ACPI_FAILURE(status))
                 return -ENODEV;
         return 0;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7eda34838bfe..bdbc4f73fcdc 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,13 @@ config BATTERY_DS2760
         help
           Say Y here to enable support for batteries with ds2760 chip.
 
+config BATTERY_DS2782
+        tristate "DS2782 standalone gas-gauge"
+        depends on I2C
+        help
+          Say Y here to enable support for the DS2782 standalone battery
+          gas-gauge.
+
 config BATTERY_PMU
         tristate "Apple PMU battery"
         depends on PPC32 && ADB_PMU
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index daf3179689aa..380d17c9ae29 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_WM8350_POWER)      += wm8350_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)    += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782)    += ds2782_battery.o
 obj-$(CONFIG_BATTERY_PMU)       += pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)      += olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)      += tosa_battery.o
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
new file mode 100644
index 000000000000..da14f374cb60
--- /dev/null
+++ b/drivers/power/ds2782_battery.c
@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC         0x06    /* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB     0x0c
+#define DS2782_REG_TEMP_MSB     0x0a
+#define DS2782_REG_CURRENT_MSB  0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP        0x69    /* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS    1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+        struct i2c_client       *client;
+        struct power_supply     battery;
+        int                     id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+        int ret;
+
+        ret = i2c_smbus_read_byte_data(info->client, reg);
+        if (ret < 0) {
+                dev_err(&info->client->dev, "register read failed\n");
+                return ret;
+        }
+
+        *val = ret;
+        return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+                                    s16 *val)
+{
+        int ret;
+
+        ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+        if (ret < 0) {
+                dev_err(&info->client->dev, "register read failed\n");
+                return ret;
+        }
+
+        *val = ret;
+        return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+        s16 raw;
+        int err;
+
+        /*
+         * Temperature is measured in units of 0.125 degrees celcius, the
+         * power_supply class measures temperature in tenths of degrees
+         * celsius. The temperature value is stored as a 10 bit number, plus
+         * sign in the upper bits of a 16 bit register.
+         */
+        err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+        if (err)
+                return err;
+        *temp = ((raw / 32) * 125) / 100;
+        return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+        int sense_res;
+        int err;
+        u8 sense_res_raw;
+        s16 raw;
+
+        /*
+         * The units of measurement for current are dependent on the value of
+         * the sense resistor.
+         */
+        err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+        if (err)
+                return err;
+        if (sense_res_raw == 0) {
+                dev_err(&info->client->dev, "sense resistor value is 0\n");
+                return -ENXIO;
+        }
+        sense_res = 1000 / sense_res_raw;
+
+        dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+                sense_res);
+        err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+        if (err)
+                return err;
+        *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+        return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+        s16 raw;
+        int err;
+
+        /*
+         * Voltage is measured in units of 4.88mV. The voltage is stored as
+         * a 10-bit number plus sign, in the upper bits of a 16-bit register
+         */
+        err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+        if (err)
+                return err;
+        *voltage_uA = (raw / 32) * 4800;
+        return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+        int err;
+        u8 raw;
+
+        err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+        if (err)
+                return err;
+        *capacity = raw;
+        return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+        int err;
+        int current_uA;
+        int capacity;
+
+        err = ds2782_get_current(info, &current_uA);
+        if (err)
+                return err;
+
+        err = ds2782_get_capacity(info, &capacity);
+        if (err)
+                return err;
+
+        if (capacity == 100)
+                *status = POWER_SUPPLY_STATUS_FULL;
+        else if (current_uA == 0)
+                *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+        else if (current_uA < 0)
+                *status = POWER_SUPPLY_STATUS_DISCHARGING;
+        else
+                *status = POWER_SUPPLY_STATUS_CHARGING;
+
+        return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+                                       enum power_supply_property prop,
+                                       union power_supply_propval *val)
+{
+        struct ds2782_info *info = to_ds2782_info(psy);
+        int ret;
+
+        switch (prop) {
+        case POWER_SUPPLY_PROP_STATUS:
+                ret = ds2782_get_status(info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CAPACITY:
+                ret = ds2782_get_capacity(info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+                ret = ds2782_get_voltage(info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_CURRENT_NOW:
+                ret = ds2782_get_current(info, &val->intval);
+                break;
+
+        case POWER_SUPPLY_PROP_TEMP:
+                ret = ds2782_get_temp(info, &val->intval);
+                break;
+
+        default:
+                ret = -EINVAL;
+        }
+
+        return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+        POWER_SUPPLY_PROP_STATUS,
+        POWER_SUPPLY_PROP_CAPACITY,
+        POWER_SUPPLY_PROP_VOLTAGE_NOW,
+        POWER_SUPPLY_PROP_CURRENT_NOW,
+        POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+        battery->type                   = POWER_SUPPLY_TYPE_BATTERY;
+        battery->properties             = ds2782_battery_props;
+        battery->num_properties         = ARRAY_SIZE(ds2782_battery_props);
+        battery->get_property           = ds2782_battery_get_property;
+        battery->external_power_changed = NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+        struct ds2782_info *info = i2c_get_clientdata(client);
+
+        power_supply_unregister(&info->battery);
+        kfree(info->battery.name);
+
+        mutex_lock(&battery_lock);
+        idr_remove(&battery_id, info->id);
+        mutex_unlock(&battery_lock);
+
+        i2c_set_clientdata(client, info);
+
+        kfree(info);
+        return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+                                const struct i2c_device_id *id)
+{
+        struct ds2782_info *info;
+        int ret;
+        int num;
+
+        /* Get an ID for this battery */
+        ret = idr_pre_get(&battery_id, GFP_KERNEL);
+        if (ret == 0) {
+                ret = -ENOMEM;
+                goto fail_id;
+        }
+
+        mutex_lock(&battery_lock);
+        ret = idr_get_new(&battery_id, client, &num);
+        mutex_unlock(&battery_lock);
+        if (ret < 0)
+                goto fail_id;
+
+        info = kzalloc(sizeof(*info), GFP_KERNEL);
+        if (!info) {
+                ret = -ENOMEM;
+                goto fail_info;
+        }
+
+        info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+        if (!info->battery.name) {
+                ret = -ENOMEM;
+                goto fail_name;
+        }
+
+        i2c_set_clientdata(client, info);
+        info->client = client;
+        ds2782_power_supply_init(&info->battery);
+
+        ret = power_supply_register(&client->dev, &info->battery);
+        if (ret) {
+                dev_err(&client->dev, "failed to register battery\n");
+                goto fail_register;
+        }
+
+        return 0;
+
+fail_register:
+        kfree(info->battery.name);
+fail_name:
+        i2c_set_clientdata(client, info);
+        kfree(info);
+fail_info:
+        mutex_lock(&battery_lock);
+        idr_remove(&battery_id, num);
+        mutex_unlock(&battery_lock);
+fail_id:
+        return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+        {"ds2782", 0},
+        {},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+        .driver         = {
+                .name   = "ds2782-battery",
+        },
+        .probe          = ds2782_battery_probe,
+        .remove         = ds2782_battery_remove,
+        .id_table       = ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+        return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+        i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 5fbca2681baa..58e419299cd6 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -35,6 +36,7 @@
 #define BAT_STAT_AC             0x10
 #define BAT_STAT_CHARGING       0x20
 #define BAT_STAT_DISCHARGING    0x40
+#define BAT_STAT_TRICKLE        0x80
 
 #define BAT_ERR_INFOFAIL        0x02
 #define BAT_ERR_OVERVOLTAGE     0x04
@@ -89,7 +91,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
         if (olpc_platform_info.ecver > 0x44) {
-                if (ec_byte & BAT_STAT_CHARGING)
+                if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
                         val->intval = POWER_SUPPLY_STATUS_CHARGING;
                 else if (ec_byte & BAT_STAT_DISCHARGING)
                         val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
            It doesn't matter though -- the EC will return the last-known
            information, and it's as if we just ran that _little_ bit faster
            and managed to read it out before the battery went away. */
-        if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+        if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+                        psp != POWER_SUPPLY_PROP_PRESENT)
                 return -ENODEV;
 
         switch (psp) {
@@ -229,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
                         return ret;
                 break;
         case POWER_SUPPLY_PROP_PRESENT:
-                val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+                val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+                                            BAT_STAT_TRICKLE));
                 break;
 
         case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
                 struct bin_attribute *attr, char *buf, loff_t off, size_t count)
 {
         uint8_t ec_byte;
-        int ret, end;
+        int ret;
+        int i;
 
         if (off >= EEPROM_SIZE)
                 return 0;
         if (off + count > EEPROM_SIZE)
                 count = EEPROM_SIZE - off;
 
-        end = EEPROM_START + off + count;
-        for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
-                ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
-                                &buf[ec_byte - EEPROM_START], 1);
+        for (i = 0; i < count; i++) {
+                ec_byte = EEPROM_START + off + i;
+                ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
                 if (ret) {
-                        printk(KERN_ERR "olpc-battery:  EC command "
-                                        "EC_BAT_EEPROM @ 0x%x failed -"
-                                        " %d!\n", ec_byte, ret);
+                        pr_err("olpc-battery: "
+                               "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+                               ec_byte, ret);
                         return -EIO;
                 }
         }
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index 8bde92126d34..b787335a8419 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -33,14 +33,14 @@ static enum power_supply_property *prop;
 
 static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
 {
-        return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+        return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
                                         pdata->batt_aux) * pdata->batt_mult /
                                         pdata->batt_div;
 }
 
 static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
 {
-        return wm97xx_read_aux_adc(bat_ps->dev->parent->driver_data,
+        return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
                                         pdata->temp_aux) * pdata->temp_mult /
                                         pdata->temp_div;
 }
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 23e10b6263d6..f7a4701bf863 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1174,23 +1174,34 @@ static struct platform_driver cmos_platform_driver = {
         }
 };
 
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
 static int __init cmos_init(void)
 {
         int retval = 0;
 
 #ifdef  CONFIG_PNP
-        pnp_register_driver(&cmos_pnp_driver);
+        retval = pnp_register_driver(&cmos_pnp_driver);
+        if (retval == 0)
+                pnp_driver_registered = true;
 #endif
 
-        if (!cmos_rtc.dev)
+        if (!cmos_rtc.dev) {
                 retval = platform_driver_probe(&cmos_platform_driver,
                                                cmos_platform_probe);
+                if (retval == 0)
+                        platform_driver_registered = true;
+        }
 
         if (retval == 0)
                 return 0;
 
 #ifdef  CONFIG_PNP
-        pnp_unregister_driver(&cmos_pnp_driver);
+        if (pnp_driver_registered)
+                pnp_unregister_driver(&cmos_pnp_driver);
 #endif
         return retval;
 }
@@ -1199,9 +1210,11 @@ module_init(cmos_init);
 static void __exit cmos_exit(void)
 {
 #ifdef  CONFIG_PNP
-        pnp_unregister_driver(&cmos_pnp_driver);
+        if (pnp_driver_registered)
+                pnp_unregister_driver(&cmos_pnp_driver);
 #endif
-        platform_driver_unregister(&cmos_platform_driver);
+        if (platform_driver_registered)
+                platform_driver_unregister(&cmos_platform_driver);
 }
 module_exit(cmos_exit);
 
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index 4ce3f72ee1c1..df918ef27965 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -16,6 +16,7 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/blkpg.h>
+#include <linux/smp_lock.h>
 
 #include <asm/ccwdev.h>
 #include <asm/cmb.h>
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 727a809636d8..ed3dcdea7fe1 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1145,12 +1145,17 @@ ap_config_timeout(unsigned long ptr)
  */
 static inline void ap_schedule_poll_timer(void)
 {
+        ktime_t hr_time;
         if (ap_using_interrupts() || ap_suspend_flag)
                 return;
         if (hrtimer_is_queued(&ap_poll_timer))
                 return;
-        hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout),
-                      HRTIMER_MODE_ABS);
+        if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
+                hr_time = ktime_set(0, poll_timeout);
+                hrtimer_forward_now(&ap_poll_timer, hr_time);
+                hrtimer_restart(&ap_poll_timer);
+        }
+        return;
 }
 
 /**
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 650bcef08f2a..cd78c501803a 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -9,7 +9,6 @@
 
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <linux/smp_lock.h>
 #include <linux/list.h>
 
 #include <scsi/scsi_tcq.h>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0b7c4c..cdd552d33a78 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
         int
         depends on ARM && PLAT_S3C
         default 2 if ARCH_S3C2400
-        default 4 if ARCH_S3C64XX || CPU_S3C2443
+        default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
         default 3
         help
           Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
           Serial port support for the Samsung S3C6400 and S3C6410
           SoCs
 
+config SERIAL_S5PC100
+        tristate "Samsung S5PC100 Serial port support"
+        depends on SERIAL_SAMSUNG && CPU_S5PC100
+        default y
+        help
+          Serial port support for the Samsung S5PC100 SoCs
+
 config SERIAL_MAX3100
         tristate "MAX3100 support"
         depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a29981c6c4..97f6fcc8b432 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 338b15c0a548..607d43a31048 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1551,6 +1551,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
         if (ret)
                 goto err_add_port;
 
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
         if (atmel_is_console_port(&port->uart)
                         && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
                 /*
@@ -1559,6 +1560,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
                  */
                 clk_disable(port->clk);
         }
+#endif
 
         device_init_wakeup(&pdev->dev, 1);
         platform_set_drvdata(pdev, port);
diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 34b4ae0fe760..c108b1a0ce98 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -236,7 +236,6 @@ static int sport_startup(struct uart_port *port)
         int retval;
 
         pr_debug("%s enter\n", __func__);
-        memset(buffer, 20, '\0');
         snprintf(buffer, 20, "%s rx", up->name);
         retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up);
         if (retval) {
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 141c0a3333ad..a9802e76b5fa 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -132,7 +132,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
         memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
             L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
         if (is_con) {
-                mem_addr = alloc_bootmem(memsz);
+                mem_addr = kzalloc(memsz, GFP_NOWAIT);
                 dma_addr = virt_to_bus(mem_addr);
         }
         else
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5d7b58f1fe42..7485afd0df4c 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -67,21 +67,8 @@
 #define UBIR  0xa4 /* BRM Incremental Register */
 #define UBMR  0xa8 /* BRM Modulator Register */
 #define UBRC  0xac /* Baud Rate Count Register */
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define ONEMS 0xb0 /* One Millisecond register */
-#define UTS   0xb4 /* UART Test Register */
-#endif
-#ifdef CONFIG_ARCH_MX1
-#define BIPR1 0xb0 /* Incremental Preset Register 1 */
-#define BIPR2 0xb4 /* Incremental Preset Register 2 */
-#define BIPR3 0xb8 /* Incremental Preset Register 3 */
-#define BIPR4 0xbc /* Incremental Preset Register 4 */
-#define BMPR1 0xc0 /* BRM Modulator Register 1 */
-#define BMPR2 0xc4 /* BRM Modulator Register 2 */
-#define BMPR3 0xc8 /* BRM Modulator Register 3 */
-#define BMPR4 0xcc /* BRM Modulator Register 4 */
-#define UTS   0xd0 /* UART Test Register */
-#endif
+#define MX2_ONEMS 0xb0 /* One Millisecond register */
+#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
 
 /* UART Control Register Bit Fields.*/
 #define  URXD_CHARRDY    (1<<15)
@@ -101,12 +88,7 @@
 #define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)  /* Send break */
 #define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_MX1
-#define  UCR1_UARTCLKEN  (1<<2)  /* UART clock enabled */
-#endif
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define  UCR1_UARTCLKEN  (0)     /* not present on mx2/mx3 */
-#endif
+#define  MX1_UCR1_UARTCLKEN  (1<<2)      /* UART clock enabled, mx1 only */
 #define  UCR1_DOZE       (1<<1)  /* Doze */
 #define  UCR1_UARTEN     (1<<0)  /* UART enabled */
 #define  UCR2_ESCI       (1<<15) /* Escape seq interrupt enable */
@@ -132,13 +114,9 @@
 #define  UCR3_RXDSEN     (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN     (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_MX1
-#define  UCR3_REF25      (1<<3)  /* Ref freq 25 MHz, only on mx1 */
-#define  UCR3_REF30      (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
-#endif
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-#define  UCR3_RXDMUXSEL  (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
-#endif
+#define  MX1_UCR3_REF25          (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  MX1_UCR3_REF30          (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#define  MX2_UCR3_RXDMUXSEL      (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
 #define  UCR3_INVT       (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN       (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -186,12 +164,10 @@
 #define  UTS_SOFTRST     (1<<0)  /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START             16
 #define DEV_NAME                "ttymxc"
 #define MAX_INTERNAL_IRQ        MXC_INTERNAL_IRQS
-#endif
 
 /*
  * This determines how often we check the modem status signals
@@ -706,11 +682,11 @@ static int imx_startup(struct uart_port *port)
                 }
         }
 
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-        temp = readl(sport->port.membase + UCR3);
-        temp |= UCR3_RXDMUXSEL;
-        writel(temp, sport->port.membase + UCR3);
-#endif
+        if (!cpu_is_mx1()) {
+                temp = readl(sport->port.membase + UCR3);
+                temp |= MX2_UCR3_RXDMUXSEL;
+                writel(temp, sport->port.membase + UCR3);
+        }
 
         if (USE_IRDA(sport)) {
                 temp = readl(sport->port.membase + UCR4);
@@ -942,9 +918,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
         writel(num, sport->port.membase + UBIR);
         writel(denom, sport->port.membase + UBMR);
 
-#ifdef ONEMS
-        writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
-#endif
+        if (!cpu_is_mx1())
+                writel(sport->port.uartclk / div / 1000,
+                                sport->port.membase + MX2_ONEMS);
 
         writel(old_ucr1, sport->port.membase + UCR1);
 
@@ -1074,17 +1050,20 @@ static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
         struct imx_port *sport = imx_ports[co->index];
-        unsigned int old_ucr1, old_ucr2;
+        unsigned int old_ucr1, old_ucr2, ucr1;
 
         /*
          *      First, save UCR1/2 and then disable interrupts
          */
-        old_ucr1 = readl(sport->port.membase + UCR1);
+        ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
         old_ucr2 = readl(sport->port.membase + UCR2);
 
-        writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
-                ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
-                sport->port.membase + UCR1);
+        if (cpu_is_mx1())
+                ucr1 |= MX1_UCR1_UARTCLKEN;
+        ucr1 |= UCR1_UARTEN;
+        ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+        writel(ucr1, sport->port.membase + UCR1);
 
         writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
 
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index 698048f64f5e..f7c24baa1416 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -730,7 +730,6 @@ static int __devexit msm_serial_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver msm_platform_driver = {
-        .probe = msm_serial_probe,
         .remove = msm_serial_remove,
         .driver = {
                 .name = "msm_serial",
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index eee4b6e0af2c..9b80ad36dbba 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -59,6 +59,8 @@
 
 /* per-register bitmasks: */
 
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
 #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE  (1 << 0)
 #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
 
@@ -90,6 +92,7 @@
 
 #define OMAP2_MCSPI_CHCTRL_EN           (1 << 0)
 
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN   (1 << 0)
 
 /* We have 2 DMA channels per CS, one for RX and one for TX */
 struct omap2_mcspi_dma {
@@ -269,7 +272,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
         if (rx != NULL) {
                 omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
-                                data_type, element_count, 1,
+                                data_type, element_count - 1, 1,
                                 OMAP_DMA_SYNC_ELEMENT,
                                 mcspi_dma->dma_rx_sync_dev, 1);
 
@@ -300,6 +303,25 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
         if (rx != NULL) {
                 wait_for_completion(&mcspi_dma->dma_rx_completion);
                 dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+                omap2_mcspi_set_enable(spi, 0);
+                if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
+                                & OMAP2_MCSPI_CHSTAT_RXS)) {
+                        u32 w;
+
+                        w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+                        if (word_len <= 8)
+                                ((u8 *)xfer->rx_buf)[element_count - 1] = w;
+                        else if (word_len <= 16)
+                                ((u16 *)xfer->rx_buf)[element_count - 1] = w;
+                        else /* word_len <= 32 */
+                                ((u32 *)xfer->rx_buf)[element_count - 1] = w;
+                } else {
+                        dev_err(&spi->dev, "DMA RX last word empty");
+                        count -= (word_len <= 8)  ? 1 :
+                                 (word_len <= 16) ? 2 :
+                               /* word_len <= 32 */ 4;
+                }
+                omap2_mcspi_set_enable(spi, 1);
         }
         return count;
 }
@@ -873,8 +895,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
         } while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
 
         mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
-                        /* (3 << 8) | (2 << 3) | */
-                        OMAP2_MCSPI_SYSCONFIG_AUTOIDLE);
+                        OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+                        OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+                        OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+
+        mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
+                        OMAP2_MCSPI_WAKEUPENABLE_WKEN);
 
         omap2_mcspi_set_master_mode(master);
 
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 348bf61a8fec..975ecddbce30 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig"
 
 source "drivers/staging/stlc45xx/Kconfig"
 
-source "drivers/staging/uc2322/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8d61d7b4debf..2241ae1b21ee 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_DST)               += dst/
 obj-$(CONFIG_POHMELFS)          += pohmelfs/
 obj-$(CONFIG_STLC45XX)          += stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011)       += uc2322/
 obj-$(CONFIG_B3DFG)             += b3dfg/
 obj-$(CONFIG_IDE_PHISON)        += phison/
 obj-$(CONFIG_PLAN9AUTH)         += p9auth/
diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c
index fe72240f5a9e..f934393f3959 100644
--- a/drivers/staging/android/lowmemorykiller.c
+++ b/drivers/staging/android/lowmemorykiller.c
@@ -96,19 +96,21 @@ static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask)
 
         read_lock(&tasklist_lock);
         for_each_process(p) {
+                struct mm_struct *mm;
                 int oom_adj;
 
                 task_lock(p);
-                if (!p->mm) {
+                mm = p->mm;
+                if (!mm) {
                         task_unlock(p);
                         continue;
                 }
-                oom_adj = p->oomkilladj;
+                oom_adj = mm->oom_adj;
                 if (oom_adj < min_adj) {
                         task_unlock(p);
                         continue;
                 }
-                tasksize = get_mm_rss(p->mm);
+                tasksize = get_mm_rss(mm);
                 task_unlock(p);
                 if (tasksize <= 0)
                         continue;
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index baf83c6a9412..e3c3adc282e2 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -45,6 +45,8 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include <linux/delay.h>
 #include <linux/ctype.h>
 #include <linux/firmware.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
 #include "comedi_pci.h"
 #include "jr3_pci.h"
 
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 92121cf8c45c..5d9bab352c1d 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -111,9 +111,13 @@ static const struct s626_board s626_boards[] = {
 #define PCI_VENDOR_ID_S626 0x1131
 #define PCI_DEVICE_ID_S626 0x7146
 
+/*
+ * For devices with vendor:device id == 0x1131:0x7146 you must specify
+ * also subvendor:subdevice ids, because otherwise it will conflict with
+ * Philips SAA7146 media/dvb based cards.
+ */
 static DEFINE_PCI_DEVICE_TABLE(s626_pci_table) = {
-        {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-                0},
+        {PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626, 0x6000, 0x0272, 0, 0, 0},
         {0}
 };
 
@@ -499,25 +503,26 @@ static int s626_attach(struct comedi_device *dev, struct comedi_devconfig *it)
         resource_size_t resourceStart;
         dma_addr_t appdma;
         struct comedi_subdevice *s;
-        struct pci_dev *pdev;
+        const struct pci_device_id *ids;
+        struct pci_dev *pdev = NULL;
 
         if (alloc_private(dev, sizeof(struct s626_private)) < 0)
                 return -ENOMEM;
 
-        for (pdev = pci_get_device(PCI_VENDOR_ID_S626, PCI_DEVICE_ID_S626,
-                        NULL); pdev != NULL;
-                pdev = pci_get_device(PCI_VENDOR_ID_S626,
-                        PCI_DEVICE_ID_S626, pdev)) {
-                if (it->options[0] || it->options[1]) {
-                        if (pdev->bus->number == it->options[0] &&
-                                PCI_SLOT(pdev->devfn) == it->options[1]) {
+        for (i = 0; i < (ARRAY_SIZE(s626_pci_table) - 1) && !pdev; i++) {
+                ids = &s626_pci_table[i];
+                do {
+                        pdev = pci_get_subsys(ids->vendor, ids->device, ids->subvendor,
+                                              ids->subdevice, pdev);
+
+                        if ((it->options[0] || it->options[1]) && pdev) {
                                 /* matches requested bus/slot */
+                                if (pdev->bus->number == it->options[0] &&
+                                    PCI_SLOT(pdev->devfn) == it->options[1])
+                                        break;
+                        } else
                                 break;
-                        }
-                } else {
-                        /* no bus/slot specified */
-                        break;
-                }
+                } while (1);
         }
         devpriv->pdev = pdev;
 
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
index a5e4acab089e..bb22347af60e 100644
--- a/drivers/staging/go7007/s2250-loader.c
+++ b/drivers/staging/go7007/s2250-loader.c
@@ -17,6 +17,7 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <dvb-usb.h>
 
diff --git a/drivers/staging/meilhaus/TODO b/drivers/staging/meilhaus/TODO
index 6ec25203089c..d6ce39823de6 100644
--- a/drivers/staging/meilhaus/TODO
+++ b/drivers/staging/meilhaus/TODO
@@ -7,4 +7,4 @@ TODO:
         - possible comedi merge
 
 Please send cleanup patches to Greg Kroah-Hartman <greg@kroah.com>
-and CC: David Kiliani <mail@davidkiliani.de>
+and CC: David Kiliani <mail@davidkiliani.de> and Meilhaus Support <support@meilhaus.de>
diff --git a/drivers/staging/rspiusb/rspiusb.c b/drivers/staging/rspiusb/rspiusb.c
index 1cdfe69585ea..2f8155c1968b 100644
--- a/drivers/staging/rspiusb/rspiusb.c
+++ b/drivers/staging/rspiusb/rspiusb.c
@@ -444,8 +444,7 @@ static void piusb_write_bulk_callback(struct urb *urb)
                         __func__, status);
 
         pdx->pendingWrite = 0;
-        usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-                        urb->transfer_buffer, urb->transfer_dma);
+        kfree(urb->transfer_buffer);
 }
 
 int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
@@ -457,9 +456,7 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
 
         urb = usb_alloc_urb(0, GFP_KERNEL);
         if (urb != NULL) {
-                kbuf =
-                    usb_buffer_alloc(pdx->udev, len, GFP_KERNEL,
-                                     &urb->transfer_dma);
+                kbuf = kmalloc(len, GFP_KERNEL);
                 if (!kbuf) {
                         dev_err(&pdx->udev->dev, "buffer_alloc failed\n");
                         return -ENOMEM;
@@ -470,7 +467,6 @@ int piusb_output(struct ioctl_struct *io, unsigned char *uBuf, int len,
                 }
                 usb_fill_bulk_urb(urb, pdx->udev, pdx->hEP[io->endpoint], kbuf,
                                   len, piusb_write_bulk_callback, pdx);
-                urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
                 err = usb_submit_urb(urb, GFP_KERNEL);
                 if (err) {
                         dev_err(&pdx->udev->dev,
@@ -641,7 +637,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
         numPagesRequired =
             ((uaddr & ~PAGE_MASK) + count + ~PAGE_MASK) >> PAGE_SHIFT;
         dbg("Number of pages needed = %d", numPagesRequired);
-        maplist_p = vmalloc(numPagesRequired * sizeof(struct page));
+        maplist_p = vmalloc(numPagesRequired * sizeof(struct page *));
         if (!maplist_p) {
                 dbg("Can't Allocate Memory for maplist_p");
                 return -ENOMEM;
@@ -712,9 +708,7 @@ static int MapUserBuffer(struct ioctl_struct *io, struct device_extension *pdx)
                 usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i],
                                   pdx->udev,
                                   epAddr,
-                                  (dma_addr_t *) sg_dma_address(&pdx->
-                                                                sgl[frameInfo]
-                                                                [i]),
+                                  NULL, // non-DMA HC? buy a better hardware
                                   sg_dma_len(&pdx->sgl[frameInfo][i]),
                                   piusb_readPIXEL_callback, (void *)pdx);
                 pdx->PixelUrb[frameInfo][i]->transfer_dma =
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index 5e5b3f2b7eb1..29e3b53e52a1 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -89,6 +89,7 @@
         {USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */              \
         {USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */              \
         {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */              \
+        {USB_DEVICE(0x0DF6,0x003F)}, /* Sitecom WL-608 */       \
         {USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */         \
         {USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */         \
         {USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */          \
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
index 93af37e2d31a..54b4b718f84a 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
@@ -461,19 +461,19 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
                              struct iw_request_info *info,
                              union iwreq_data *wrqu, char *extra)
 {
-        strcpy(wrqu->name, "802.11");
+        strlcpy(wrqu->name, "802.11", IFNAMSIZ);
         if(ieee->modulation & IEEE80211_CCK_MODULATION){
-                strcat(wrqu->name, "b");
+                strlcat(wrqu->name, "b", IFNAMSIZ);
                 if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-                        strcat(wrqu->name, "/g");
+                        strlcat(wrqu->name, "/g", IFNAMSIZ);
         }else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-                strcat(wrqu->name, "g");
+                strlcat(wrqu->name, "g", IFNAMSIZ);
 
         if((ieee->state == IEEE80211_LINKED) ||
                 (ieee->state == IEEE80211_LINKED_SCANNING))
-                strcat(wrqu->name," linked");
+                strlcat(wrqu->name,"  link", IFNAMSIZ);
         else if(ieee->state != IEEE80211_NOLINK)
-                strcat(wrqu->name," link..");
+                strlcat(wrqu->name," .....", IFNAMSIZ);
 
 
         return 0;
diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig
index 4b5552c5926e..770f41280f21 100644
--- a/drivers/staging/rtl8192su/Kconfig
+++ b/drivers/staging/rtl8192su/Kconfig
@@ -1,6 +1,6 @@
 config RTL8192SU
         tristate "RealTek RTL8192SU Wireless LAN NIC driver"
         depends on PCI
-        depends on WIRELESS_EXT && COMPAT_NET_DEV_OPS
+        depends on WIRELESS_EXT
         default N
         ---help---
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
index f408b4583b82..759032db4a34 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c
@@ -118,7 +118,6 @@ struct net_device *alloc_ieee80211(int sizeof_priv)
 #else
         ieee = (struct ieee80211_device *)dev->priv;
 #endif
-        dev->hard_start_xmit = ieee80211_xmit;
 
         memset(ieee, 0, sizeof(struct ieee80211_device)+sizeof_priv);
         ieee->dev = dev;
diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
index 1f50c46dcb90..191dc3fbbe32 100644
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac_wx.c
@@ -548,21 +548,21 @@ int ieee80211_wx_get_name(struct ieee80211_device *ieee,
                              struct iw_request_info *info,
                              union iwreq_data *wrqu, char *extra)
 {
-        strcpy(wrqu->name, "802.11");
+        strlcpy(wrqu->name, "802.11", IFNAMSIZ);
         if(ieee->modulation & IEEE80211_CCK_MODULATION){
-                strcat(wrqu->name, "b");
+                strlcat(wrqu->name, "b", IFNAMSIZ);
                 if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-                        strcat(wrqu->name, "/g");
+                        strlcat(wrqu->name, "/g", IFNAMSIZ);
         }else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
-                strcat(wrqu->name, "g");
+                strlcat(wrqu->name, "g", IFNAMSIZ);
         if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
-                strcat(wrqu->name, "/n");
+                strlcat(wrqu->name, "/n", IFNAMSIZ);
 
         if((ieee->state == IEEE80211_LINKED) ||
                 (ieee->state == IEEE80211_LINKED_SCANNING))
-                strcat(wrqu->name," linked");
+                strlcat(wrqu->name, "  link", IFNAMSIZ);
         else if(ieee->state != IEEE80211_NOLINK)
-                strcat(wrqu->name," link..");
+                strlcat(wrqu->name, " .....", IFNAMSIZ);
 
 
         return 0;
diff --git a/drivers/staging/rtl8192su/r8192U_core.c b/drivers/staging/rtl8192su/r8192U_core.c
index f1423d714496..4ab250743e81 100644
--- a/drivers/staging/rtl8192su/r8192U_core.c
+++ b/drivers/staging/rtl8192su/r8192U_core.c
@@ -12132,6 +12132,19 @@ static void HalUsbSetQueuePipeMapping8192SUsb(struct usb_interface *intf, struct
 }
 #endif
 
+static const struct net_device_ops rtl8192_netdev_ops = {
+        .ndo_open               = rtl8192_open,
+        .ndo_stop               = rtl8192_close,
+        .ndo_get_stats          = rtl8192_stats,
+        .ndo_tx_timeout         = tx_timeout,
+        .ndo_do_ioctl           = rtl8192_ioctl,
+        .ndo_set_multicast_list = r8192_set_multicast,
+        .ndo_set_mac_address    = r8192_set_mac_adr,
+        .ndo_validate_addr      = eth_validate_addr,
+        .ndo_change_mtu         = eth_change_mtu,
+        .ndo_start_xmit         = ieee80211_xmit,
+};
+
 #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
 static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
                          const struct usb_device_id *id)
@@ -12186,15 +12199,7 @@ static void * __devinit rtl8192_usb_probe(struct usb_device *udev,
         priv->ops = &rtl8192u_ops;
 #endif
 
-        dev->open = rtl8192_open;
-        dev->stop = rtl8192_close;
-        //dev->hard_start_xmit = rtl8192_8023_hard_start_xmit;
-        dev->tx_timeout = tx_timeout;
-        //dev->wireless_handlers = &r8192_wx_handlers_def;
-        dev->do_ioctl = rtl8192_ioctl;
-        dev->set_multicast_list = r8192_set_multicast;
-        dev->set_mac_address = r8192_set_mac_adr;
-        dev->get_stats = rtl8192_stats;
+        dev->netdev_ops = &rtl8192_netdev_ops;
 
          //DMESG("Oops: i'm coming\n");
 #if WIRELESS_EXT >= 12
diff --git a/drivers/staging/rtl8192su/r8192U_pm.c b/drivers/staging/rtl8192su/r8192U_pm.c
index 92c95aa36638..b1531a8d0cde 100644
--- a/drivers/staging/rtl8192su/r8192U_pm.c
+++ b/drivers/staging/rtl8192su/r8192U_pm.c
@@ -35,7 +35,9 @@ int rtl8192U_suspend(struct usb_interface *intf, pm_message_t state)
                       return 0;
                  }
 
-                dev->stop(dev);
+                if (dev->netdev_ops->ndo_stop)
+                        dev->netdev_ops->ndo_stop(dev);
+
                 mdelay(10);
 
                 netif_device_detach(dev);
@@ -61,7 +63,9 @@ int rtl8192U_resume (struct usb_interface *intf)
                 }
 
                 netif_device_attach(dev);
-                dev->open(dev);
+
+                if (dev->netdev_ops->ndo_open)
+                        dev->netdev_ops->ndo_open(dev);
         }
 
         return 0;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index 90b29b564631..0fdf8c6dc648 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -360,18 +360,18 @@ static void qt_read_bulk_callback(struct urb *urb)
         if (port_paranoia_check(port, __func__) != 0) {
                 dbg("%s - port_paranoia_check, exiting\n", __func__);
                 qt_port->ReadBulkStopped = 1;
-                return;
+                goto exit;
         }
 
         if (!serial) {
                 dbg("%s - bad serial pointer, exiting\n", __func__);
-                return;
+                goto exit;
         }
         if (qt_port->closePending == 1) {
                 /* Were closing , stop reading */
                 dbg("%s - (qt_port->closepending == 1\n", __func__);
                 qt_port->ReadBulkStopped = 1;
-                return;
+                goto exit;
         }
 
         /*
@@ -381,7 +381,7 @@ static void qt_read_bulk_callback(struct urb *urb)
          */
         if (qt_port->RxHolding == 1) {
                 qt_port->ReadBulkStopped = 1;
-                return;
+                goto exit;
         }
 
         if (urb->status) {
@@ -389,7 +389,7 @@ static void qt_read_bulk_callback(struct urb *urb)
 
                 dbg("%s - nonzero read bulk status received: %d\n",
                     __func__, urb->status);
-                return;
+                goto exit;
         }
 
         if (tty && RxCount) {
@@ -463,6 +463,8 @@ static void qt_read_bulk_callback(struct urb *urb)
         }
 
         schedule_work(&port->work);
+exit:
+        tty_kref_put(tty);
 }
 
 /*
@@ -736,6 +738,11 @@ static int qt_startup(struct usb_serial *serial)
                 if (!qt_port) {
                         dbg("%s: kmalloc for quatech_port (%d) failed!.",
                             __func__, i);
+                        for(--i; i >= 0; i--) {
+                                port = serial->port[i];
+                                kfree(usb_get_serial_port_data(port));
+                                usb_set_serial_port_data(port, NULL);
+                        }
                         return -ENOMEM;
                 }
                 spin_lock_init(&qt_port->lock);
@@ -866,7 +873,7 @@ static void qt_release(struct usb_serial *serial)
 
 }
 
-int qt_open(struct tty_struct *tty,
+static int qt_open(struct tty_struct *tty,
             struct usb_serial_port *port, struct file *filp)
 {
         struct usb_serial *serial;
@@ -1041,17 +1048,19 @@ static void qt_block_until_empty(struct tty_struct *tty,
         }
 }
 
-static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
-                     struct file *filp)
+static void qt_close(struct usb_serial_port *port)
 {
         struct usb_serial *serial = port->serial;
         struct quatech_port *qt_port;
         struct quatech_port *port0;
+        struct tty_struct *tty;
         int status;
         unsigned int index;
         status = 0;
 
         dbg("%s - port %d\n", __func__, port->number);
+
+        tty = tty_port_tty_get(&port->port);
         index = tty->index - serial->minor;
 
         qt_port = qt_get_port_private(port);
@@ -1066,6 +1075,7 @@ static void qt_close(struct tty_struct *tty, struct usb_serial_port *port,
         /* wait up to for transmitter to empty */
         if (serial->dev)
                 qt_block_until_empty(tty, qt_port);
+        tty_kref_put(tty);
 
         /* Close uart channel */
         status = qt_close_channel(serial, index);
diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c
index cfdaac9b747e..a137c78fac09 100644
--- a/drivers/staging/stlc45xx/stlc45xx.c
+++ b/drivers/staging/stlc45xx/stlc45xx.c
@@ -2235,24 +2235,6 @@ static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw,
         stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
 }
 
-static int stlc45xx_op_config_interface(struct ieee80211_hw *hw,
-                                        struct ieee80211_vif *vif,
-                                        struct ieee80211_if_conf *conf)
-{
-        struct stlc45xx *stlc = hw->priv;
-
-        stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
-        mutex_lock(&stlc->mutex);
-
-        memcpy(stlc->bssid, conf->bssid, ETH_ALEN);
-        stlc45xx_tx_setup(stlc);
-
-        mutex_unlock(&stlc->mutex);
-
-        return 0;
-}
-
 static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
 {
         struct stlc45xx *stlc = hw->priv;
@@ -2295,6 +2277,14 @@ static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw,
 {
         struct stlc45xx *stlc = hw->priv;
 
+        stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
+        mutex_lock(&stlc->mutex);
+
+        memcpy(stlc->bssid, info->bssid, ETH_ALEN);
+        stlc45xx_tx_setup(stlc);
+
+        mutex_unlock(&stlc->mutex);
+
         if (changed & BSS_CHANGED_ASSOC) {
                 stlc->associated = info->assoc;
                 if (info->assoc)
@@ -2357,7 +2347,6 @@ static const struct ieee80211_ops stlc45xx_ops = {
         .add_interface = stlc45xx_op_add_interface,
         .remove_interface = stlc45xx_op_remove_interface,
         .config = stlc45xx_op_config,
-        .config_interface = stlc45xx_op_config_interface,
         .configure_filter = stlc45xx_op_configure_filter,
         .tx = stlc45xx_op_tx,
         .bss_info_changed = stlc45xx_op_bss_info_changed,
diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig
deleted file mode 100644
index 2e0c6e79df2b..000000000000
--- a/drivers/staging/uc2322/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config USB_SERIAL_ATEN2011
-        tristate "ATEN 2011 USB to serial device support"
-        depends on USB_SERIAL
-        default N
-        ---help---
-          Say Y here if you want to use a ATEN 2011 dual port USB to serial
-          adapter.
-
-          To compile this driver as a module, choose M here: the module will be
-          called aten2011.
diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile
deleted file mode 100644
index 49c18d6e579f..000000000000
--- a/drivers/staging/uc2322/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_ATEN2011)       += aten2011.o
diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO
deleted file mode 100644
index c189a64c4185..000000000000
--- a/drivers/staging/uc2322/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
-        - checkpatch.pl cleanups
-        - remove dead and useless code (auditing the tty ioctls to
-          verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
deleted file mode 100644
index 39d0926d1a90..000000000000
--- a/drivers/staging/uc2322/aten2011.c
+++ /dev/null
@@ -1,2430 +0,0 @@
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1                0x3A    /* Zero_Flag_Reg1 58 */
-#define ZLP_REG2                0x3B    /* Zero_Flag_Reg2 59 */
-#define ZLP_REG3                0x3C    /* Zero_Flag_Reg3 60 */
-#define ZLP_REG4                0x3D    /* Zero_Flag_Reg4 61 */
-#define ZLP_REG5                0x3E    /* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines    */
-#define SERIAL_IIR_RLS          0x06
-#define SERIAL_IIR_RDA          0x04
-#define SERIAL_IIR_CTI          0x0c
-#define SERIAL_IIR_THR          0x02
-#define SERIAL_IIR_MS           0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER.  */
-#define SERIAL_LSR_DR           0x0001
-#define SERIAL_LSR_OE           0x0002
-#define SERIAL_LSR_PE           0x0004
-#define SERIAL_LSR_FE           0x0008
-#define SERIAL_LSR_BI           0x0010
-#define SERIAL_LSR_THRE         0x0020
-#define SERIAL_LSR_TEMT         0x0040
-#define SERIAL_LSR_FIFOERR      0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS      0x10
-#define ATEN_MSR_DELTA_DSR      0x20
-#define ATEN_MSR_DELTA_RI       0x40
-#define ATEN_MSR_DELTA_CD       0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER         ((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER       ((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER       ((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER        ((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER           ((__u16)(0x02))
-#define LINE_CONTROL_REGISTER           ((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER          ((__u16)(0x04))
-#define LINE_STATUS_REGISTER            ((__u16)(0x05))
-#define MODEM_STATUS_REGISTER           ((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER            ((__u16)(0x07))
-#define DIVISOR_LATCH_LSB               ((__u16)(0x00))
-#define DIVISOR_LATCH_MSB               ((__u16)(0x01))
-
-#define SP1_REGISTER                    ((__u16)(0x00))
-#define CONTROL1_REGISTER               ((__u16)(0x01))
-#define CLK_MULTI_REGISTER              ((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER        ((__u16)(0x03))
-#define DCR1_REGISTER                   ((__u16)(0x04))
-#define GPIO_REGISTER                   ((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB                 ((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS                        16      /* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE        32      /* URB Size  */
-
-#define USB_VENDOR_ID_ATENINTL          0x0557
-#define ATENINTL_DEVICE_ID_2011         0x2011
-#define ATENINTL_DEVICE_ID_7820         0x7820
-
-static struct usb_device_id id_table[] = {
-        { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
-        { USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
-        { } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
-        int             port_num;          /*Actual port number in the device(1,2,etc)*/
-        __u8            bulk_out_endpoint;      /* the bulk out endpoint handle */
-        unsigned char   *bulk_out_buffer;       /* buffer used for the bulk out endpoint */
-        struct urb      *write_urb;             /* write URB for this port */
-        __u8            bulk_in_endpoint;       /* the bulk in endpoint handle */
-        unsigned char   *bulk_in_buffer;        /* the buffer we use for the bulk in endpoint */
-        struct urb      *read_urb;              /* read URB for this port */
-        __u8            shadowLCR;              /* last LCR value received */
-        __u8            shadowMCR;              /* last MCR value received */
-        char            open;
-        char            chaseResponsePending;
-        wait_queue_head_t       wait_chase;             /* for handling sleeping while waiting for chase to finish */
-        wait_queue_head_t       wait_command;           /* for handling sleeping while waiting for command to finish */
-        struct async_icount     icount;
-        struct usb_serial_port  *port;                  /* loop back to the owner of this object */
-        /*Offsets*/
-        __u8            SpRegOffset;
-        __u8            ControlRegOffset;
-        __u8            DcrRegOffset;
-        /* for processing control URBS in interrupt context */
-        struct urb      *control_urb;
-        char            *ctrl_buf;
-        int             MsrLsr;
-
-        struct urb      *write_urb_pool[NUM_URBS];
-        /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
-        struct ktermios tmp_termios;        /* stores the old termios settings */
-        spinlock_t      lock;                   /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
-        __u8            interrupt_in_endpoint;          /* the interrupt endpoint handle */
-        unsigned char   *interrupt_in_buffer;           /* the buffer we use for the interrupt endpoint */
-        struct urb      *interrupt_read_urb;    /* our interrupt urb */
-        __u8            bulk_in_endpoint;       /* the bulk in endpoint handle */
-        unsigned char   *bulk_in_buffer;                /* the buffer we use for the bulk in endpoint */
-        struct urb      *read_urb;              /* our bulk read urb */
-        __u8            bulk_out_endpoint;      /* the bulk out endpoint handle */
-        struct usb_serial       *serial;        /* loop back to the owner of this object */
-        int     ATEN2011_spectrum_2or4ports;    /* this says the number of ports in the device */
-        /* Indicates about the no.of opened ports of an individual USB-serial adapater. */
-        unsigned int    NoOfOpenPorts;
-        /* a flag for Status endpoint polling */
-        unsigned char   status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-                                 struct usb_serial_port *port,
-                                 struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-                                          struct ATENINTL_port *ATEN2011_port,
-                                          struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5              0x00    /* 5 bits/char */
-#define LCR_BITS_6              0x01    /* 6 bits/char */
-#define LCR_BITS_7              0x02    /* 7 bits/char */
-#define LCR_BITS_8              0x03    /* 8 bits/char */
-#define LCR_BITS_MASK           0x03    /* Mask for bits/char field */
-
-#define LCR_STOP_1              0x00    /* 1 stop bit */
-#define LCR_STOP_1_5            0x04    /* 1.5 stop bits (if 5   bits/char) */
-#define LCR_STOP_2              0x04    /* 2 stop bits   (if 6-8 bits/char) */
-#define LCR_STOP_MASK           0x04    /* Mask for stop bits field */
-
-#define LCR_PAR_NONE            0x00    /* No parity */
-#define LCR_PAR_ODD             0x08    /* Odd parity */
-#define LCR_PAR_EVEN            0x18    /* Even parity */
-#define LCR_PAR_MARK            0x28    /* Force parity bit to 1 */
-#define LCR_PAR_SPACE           0x38    /* Force parity bit to 0 */
-#define LCR_PAR_MASK            0x38    /* Mask for parity field */
-
-#define LCR_SET_BREAK           0x40    /* Set Break condition */
-#define LCR_DL_ENABLE           0x80    /* Enable access to divisor latch */
-
-#define MCR_DTR                 0x01    /* Assert DTR */
-#define MCR_RTS                 0x02    /* Assert RTS */
-#define MCR_OUT1                0x04    /* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE           0x08    /* Enable interrupt outputs */
-#define MCR_LOOPBACK            0x10    /* Set internal (digital) loopback mode */
-#define MCR_XON_ANY             0x20    /* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS        0x10    /* Current state of CTS */
-#define ATEN2011_MSR_DSR        0x20    /* Current state of DSR */
-#define ATEN2011_MSR_RI         0x40    /* Current state of RI */
-#define ATEN2011_MSR_CD         0x80    /* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT        (50)    /* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE           0xC0
-#define ATEN_WR_RTYPE           0x40
-#define ATEN_RDREQ              0x0D
-#define ATEN_WRREQ              0x0E
-#define ATEN_CTRL_TIMEOUT       500
-#define VENDOR_READ_LENGTH      (0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-        struct usb_device *dev = port->serial->dev;
-        val = val & 0x00ff;
-
-        dbg("%s: is %x, value %x", __func__, reg, val);
-
-        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-                               ATEN_WR_RTYPE, val, reg, NULL, 0,
-                               ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-        struct usb_device *dev = port->serial->dev;
-        int ret;
-
-        ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-                              ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
-                              ATEN_WDR_TIMEOUT);
-        dbg("%s: offset is %x, return val %x", __func__, reg, *val);
-        *val = (*val) & 0x00ff;
-        return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-        struct usb_device *dev = port->serial->dev;
-        struct ATENINTL_serial *a_serial;
-        __u16 minor;
-
-        a_serial = usb_get_serial_data(port->serial);
-        minor = port->serial->minor;
-        if (minor == SERIAL_TTY_NO_MINOR)
-                minor = 0;
-        val = val & 0x00ff;
-
-        /*
-         * For the UART control registers,
-         * the application number need to be Or'ed
-         */
-        if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-                val |= (((__u16)port->number - minor) + 1) << 8;
-        else {
-                if (((__u16) port->number - minor) == 0)
-                        val |= (((__u16)port->number - minor) + 1) << 8;
-                else
-                        val |= (((__u16)port->number - minor) + 2) << 8;
-        }
-        dbg("%s: application number is %x", __func__, val);
-
-        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-                               ATEN_WR_RTYPE, val, reg, NULL, 0,
-                               ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-        struct usb_device *dev = port->serial->dev;
-        int ret = 0;
-        __u16 wval;
-        struct ATENINTL_serial *a_serial;
-        __u16 minor = port->serial->minor;
-
-        a_serial = usb_get_serial_data(port->serial);
-        if (minor == SERIAL_TTY_NO_MINOR)
-                minor = 0;
-
-        /* wval is same as application number */
-        if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-                wval = (((__u16)port->number - minor) + 1) << 8;
-        else {
-                if (((__u16) port->number - minor) == 0)
-                        wval = (((__u16) port->number - minor) + 1) << 8;
-                else
-                        wval = (((__u16) port->number - minor) + 2) << 8;
-        }
-        dbg("%s: application number is %x", __func__, wval);
-        ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-                              ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
-                              ATEN_WDR_TIMEOUT);
-        *val = (*val) & 0x00ff;
-        return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
-        struct ATENINTL_port *ATEN2011_port;
-        struct async_icount *icount;
-        ATEN2011_port = port;
-        icount = &ATEN2011_port->icount;
-        if (newMsr &
-            (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
-             ATEN_MSR_DELTA_CD)) {
-                icount = &ATEN2011_port->icount;
-
-                /* update input line counters */
-                if (newMsr & ATEN_MSR_DELTA_CTS)
-                        icount->cts++;
-                if (newMsr & ATEN_MSR_DELTA_DSR)
-                        icount->dsr++;
-                if (newMsr & ATEN_MSR_DELTA_CD)
-                        icount->dcd++;
-                if (newMsr & ATEN_MSR_DELTA_RI)
-                        icount->rng++;
-        }
-
-        return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
-        struct async_icount *icount;
-
-        dbg("%s - %02x", __func__, newLsr);
-
-        if (newLsr & SERIAL_LSR_BI) {
-                /*
-                 * Parity and Framing errors only count if they occur exclusive
-                 * of a break being received.
-                 */
-                newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
-        }
-
-        /* update input line counters */
-        icount = &port->icount;
-        if (newLsr & SERIAL_LSR_BI)
-                icount->brk++;
-        if (newLsr & SERIAL_LSR_OE)
-                icount->overrun++;
-        if (newLsr & SERIAL_LSR_PE)
-                icount->parity++;
-        if (newLsr & SERIAL_LSR_FE)
-                icount->frame++;
-
-        return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
-        unsigned char *data;
-        struct ATENINTL_port *ATEN2011_port;
-        __u8 regval = 0x0;
-
-        switch (urb->status) {
-        case 0:
-                /* success */
-                break;
-        case -ECONNRESET:
-        case -ENOENT:
-        case -ESHUTDOWN:
-                /* this urb is terminated, clean up */
-                dbg("%s - urb shutting down with status: %d", __func__,
-                    urb->status);
-                return;
-        default:
-                dbg("%s - nonzero urb status received: %d", __func__,
-                    urb->status);
-                goto exit;
-        }
-
-        ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-        dbg("%s urb buffer size is %d", __func__, urb->actual_length);
-        dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
-                ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
-        data = urb->transfer_buffer;
-        regval = (__u8) data[0];
-        dbg("%s data is %x", __func__, regval);
-        if (ATEN2011_port->MsrLsr == 0)
-                handle_newMsr(ATEN2011_port, regval);
-        else if (ATEN2011_port->MsrLsr == 1)
-                handle_newLsr(ATEN2011_port, regval);
-
-exit:
-        return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
-                            __u16 *val)
-{
-        struct usb_device *dev = ATEN->port->serial->dev;
-        struct usb_ctrlrequest *dr = NULL;
-        unsigned char *buffer = NULL;
-        int ret = 0;
-        buffer = (__u8 *) ATEN->ctrl_buf;
-
-        dr = (void *)(buffer + 2);
-        dr->bRequestType = ATEN_RD_RTYPE;
-        dr->bRequest = ATEN_RDREQ;
-        dr->wValue = cpu_to_le16(Wval);
-        dr->wIndex = cpu_to_le16(reg);
-        dr->wLength = cpu_to_le16(2);
-
-        usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
-                             (unsigned char *)dr, buffer, 2,
-                             ATEN2011_control_callback, ATEN);
-        ATEN->control_urb->transfer_buffer_length = 2;
-        ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
-        return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
-        int result;
-        int length;
-        struct ATENINTL_port *ATEN2011_port;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct usb_serial *serial;
-        __u16 Data;
-        unsigned char *data;
-        __u8 sp[5], st;
-        int i;
-        __u16 wval;
-        int minor;
-
-        dbg("%s", " : Entering");
-
-        ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
-        switch (urb->status) {
-        case 0:
-                /* success */
-                break;
-        case -ECONNRESET:
-        case -ENOENT:
-        case -ESHUTDOWN:
-                /* this urb is terminated, clean up */
-                dbg("%s - urb shutting down with status: %d", __func__,
-                    urb->status);
-                return;
-        default:
-                dbg("%s - nonzero urb status received: %d", __func__,
-                    urb->status);
-                goto exit;
-        }
-        length = urb->actual_length;
-        data = urb->transfer_buffer;
-
-        serial = ATEN2011_serial->serial;
-
-        /* ATENINTL get 5 bytes
-         * Byte 1 IIR Port 1 (port.number is 0)
-         * Byte 2 IIR Port 2 (port.number is 1)
-         * Byte 3 IIR Port 3 (port.number is 2)
-         * Byte 4 IIR Port 4 (port.number is 3)
-         * Byte 5 FIFO status for both */
-
-        if (length && length > 5) {
-                dbg("%s", "Wrong data !!!");
-                return;
-        }
-
-        /* MATRIX */
-        if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
-                sp[0] = (__u8) data[0];
-                sp[1] = (__u8) data[1];
-                sp[2] = (__u8) data[2];
-                sp[3] = (__u8) data[3];
-                st = (__u8) data[4];
-        } else {
-                sp[0] = (__u8) data[0];
-                sp[1] = (__u8) data[2];
-                /* sp[2]=(__u8)data[2]; */
-                /* sp[3]=(__u8)data[3]; */
-                st = (__u8) data[4];
-
-        }
-        for (i = 0; i < serial->num_ports; i++) {
-                ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-                minor = serial->minor;
-                if (minor == SERIAL_TTY_NO_MINOR)
-                        minor = 0;
-                if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-                    && (i != 0))
-                        wval =
-                            (((__u16) serial->port[i]->number -
-                              (__u16) (minor)) + 2) << 8;
-                else
-                        wval =
-                            (((__u16) serial->port[i]->number -
-                              (__u16) (minor)) + 1) << 8;
-                if (ATEN2011_port->open != 0) {
-                        if (sp[i] & 0x01) {
-                                dbg("SP%d No Interrupt !!!", i);
-                        } else {
-                                switch (sp[i] & 0x0f) {
-                                case SERIAL_IIR_RLS:
-                                        dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
-                                        ATEN2011_port->MsrLsr = 1;
-                                        ATEN2011_get_reg(ATEN2011_port, wval,
-                                                         LINE_STATUS_REGISTER,
-                                                         &Data);
-                                        break;
-                                case SERIAL_IIR_MS:
-                                        dbg("Serial Port %d: Modem status change", i);
-                                        ATEN2011_port->MsrLsr = 0;
-                                        ATEN2011_get_reg(ATEN2011_port, wval,
-                                                         MODEM_STATUS_REGISTER,
-                                                         &Data);
-                                        break;
-                                }
-                        }
-                }
-
-        }
-exit:
-        if (ATEN2011_serial->status_polling_started == 0)
-                return;
-
-        result = usb_submit_urb(urb, GFP_ATOMIC);
-        if (result) {
-                dev_err(&urb->dev->dev,
-                        "%s - Error %d submitting interrupt urb\n",
-                        __func__, result);
-        }
-
-        return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
-        int status;
-        unsigned char *data;
-        struct usb_serial *serial;
-        struct usb_serial_port *port;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct ATENINTL_port *ATEN2011_port;
-        struct tty_struct *tty;
-
-        if (urb->status) {
-                dbg("nonzero read bulk status received: %d", urb->status);
-                return;
-        }
-
-        ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-        port = (struct usb_serial_port *)ATEN2011_port->port;
-        serial = port->serial;
-
-        dbg("%s", "Entering...");
-
-        data = urb->transfer_buffer;
-        ATEN2011_serial = usb_get_serial_data(serial);
-
-        if (urb->actual_length) {
-                tty = tty_port_tty_get(&ATEN2011_port->port->port);
-                if (tty) {
-                        tty_buffer_request_room(tty, urb->actual_length);
-                        tty_insert_flip_string(tty, data, urb->actual_length);
-                        tty_flip_buffer_push(tty);
-                        tty_kref_put(tty);
-                }
-
-                ATEN2011_port->icount.rx += urb->actual_length;
-                dbg("ATEN2011_port->icount.rx is %d:",
-                        ATEN2011_port->icount.rx);
-        }
-
-        if (!ATEN2011_port->read_urb) {
-                dbg("%s", "URB KILLED !!!");
-                return;
-        }
-
-        if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-                ATEN2011_port->read_urb->dev = serial->dev;
-
-                status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-                if (status)
-                        dbg("usb_submit_urb(read bulk) failed, status = %d", status);
-        }
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
-        struct ATENINTL_port *ATEN2011_port;
-        struct tty_struct *tty;
-
-        if (urb->status) {
-                dbg("nonzero write bulk status received:%d", urb->status);
-                return;
-        }
-
-        ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-        dbg("%s", "Entering .........");
-
-        tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
-        if (tty && ATEN2011_port->open)
-                /* tell the tty driver that something has changed */
-                tty_wakeup(tty);
-
-        /* schedule_work(&ATEN2011_port->port->work); */
-        tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
-                                 const struct usb_device_id *id)
-{
-
-        /*need to implement the mode_reg reading and updating\
-           structures usb_serial_ device_type\
-           (i.e num_ports, num_bulkin,bulkout etc) */
-        /* Also we can update the changes  attach */
-        return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
-                         struct file *filp)
-{
-        int response;
-        int j;
-        struct usb_serial *serial;
-        struct urb *urb;
-        __u16 Data;
-        int status;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct ATENINTL_port *ATEN2011_port;
-        struct ktermios tmp_termios;
-        int minor;
-
-        serial = port->serial;
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return -ENODEV;
-
-        ATEN2011_serial = usb_get_serial_data(serial);
-        if (ATEN2011_serial == NULL)
-                return -ENODEV;
-
-        /* increment the number of opened ports counter here */
-        ATEN2011_serial->NoOfOpenPorts++;
-
-        usb_clear_halt(serial->dev, port->write_urb->pipe);
-        usb_clear_halt(serial->dev, port->read_urb->pipe);
-
-        /* Initialising the write urb pool */
-        for (j = 0; j < NUM_URBS; ++j) {
-                urb = usb_alloc_urb(0, GFP_ATOMIC);
-                ATEN2011_port->write_urb_pool[j] = urb;
-
-                if (urb == NULL) {
-                        err("No more urbs???");
-                        continue;
-                }
-
-                urb->transfer_buffer = NULL;
-                urb->transfer_buffer =
-                    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-                if (!urb->transfer_buffer) {
-                        err("%s-out of memory for urb buffers.", __func__);
-                        continue;
-                }
-        }
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
-        Data = 0x0;
-        status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-        if (status < 0) {
-                dbg("Reading Spreg failed");
-                return -1;
-        }
-        Data |= 0x80;
-        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-        if (status < 0) {
-                dbg("writing Spreg failed");
-                return -1;
-        }
-
-        Data &= ~0x80;
-        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-        if (status < 0) {
-                dbg("writing Spreg failed");
-                return -1;
-        }
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
-        if (RS485mode == 0)
-                Data = 0xC0;
-        else
-                Data = 0x00;
-        status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
-        if (status < 0) {
-                dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
-                return -1;
-        } else
-                dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
-        Data = 0x0;
-        status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-        if (status < 0) {
-                dbg("Reading Controlreg failed");
-                return -1;
-        }
-        Data |= 0x08;           /* Driver done bit */
-        Data |= 0x20;           /* rx_disable */
-        status = 0;
-        status =
-            set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-        if (status < 0) {
-                dbg("writing Controlreg failed");
-                return -1;
-        }
-        /*
-         * do register settings here
-         * Set all regs to the device default values.
-         * First Disable all interrupts.
-         */
-
-        Data = 0x00;
-        status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-        if (status < 0) {
-                dbg("disableing interrupts failed");
-                return -1;
-        }
-        /* Set FIFO_CONTROL_REGISTER to the default value */
-        Data = 0x00;
-        status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-        if (status < 0) {
-                dbg("Writing FIFO_CONTROL_REGISTER  failed");
-                return -1;
-        }
-
-        Data = 0xcf;            /* chk */
-        status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-        if (status < 0) {
-                dbg("Writing FIFO_CONTROL_REGISTER  failed");
-                return -1;
-        }
-
-        Data = 0x03;            /* LCR_BITS_8 */
-        status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-        ATEN2011_port->shadowLCR = Data;
-
-        Data = 0x0b;            /* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
-        status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-        ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
-        Data = 0x00;
-        status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-        ATEN2011_port->shadowLCR = Data;
-
-        Data |= SERIAL_LCR_DLAB;        /* data latch enable in LCR 0x80 */
-        status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-        Data = 0x0c;
-        status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-        Data = 0x0;
-        status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-        Data = 0x00;
-        status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/*      Data = ATEN2011_port->shadowLCR; */     /* data latch disable */
-        Data = Data & ~SERIAL_LCR_DLAB;
-        status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-        ATEN2011_port->shadowLCR = Data;
-#endif
-        /* clearing Bulkin and Bulkout Fifo */
-        Data = 0x0;
-        status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
-        Data = Data | 0x0c;
-        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
-        Data = Data & ~0x0c;
-        status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-        /* Finally enable all interrupts */
-        Data = 0x0;
-        Data = 0x0c;
-        status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-        /* clearing rx_disable */
-        Data = 0x0;
-        status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-        Data = Data & ~0x20;
-        status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-        /* rx_negate */
-        Data = 0x0;
-        status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-        Data = Data | 0x10;
-        status = 0;
-        status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-        /*
-         * Check to see if we've set up our endpoint info yet
-         * (can't set it up in ATEN2011_startup as the structures
-         * were not set up at that time.)
-         */
-        if (ATEN2011_serial->NoOfOpenPorts == 1) {
-                /* start the status polling here */
-                ATEN2011_serial->status_polling_started = 1;
-                /* If not yet set, Set here */
-                ATEN2011_serial->interrupt_in_buffer =
-                    serial->port[0]->interrupt_in_buffer;
-                ATEN2011_serial->interrupt_in_endpoint =
-                    serial->port[0]->interrupt_in_endpointAddress;
-                ATEN2011_serial->interrupt_read_urb =
-                    serial->port[0]->interrupt_in_urb;
-
-                /* set up interrupt urb */
-                usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
-                                 serial->dev,
-                                 usb_rcvintpipe(serial->dev,
-                                                ATEN2011_serial->
-                                                interrupt_in_endpoint),
-                                 ATEN2011_serial->interrupt_in_buffer,
-                                 ATEN2011_serial->interrupt_read_urb->
-                                 transfer_buffer_length,
-                                 ATEN2011_interrupt_callback, ATEN2011_serial,
-                                 ATEN2011_serial->interrupt_read_urb->interval);
-
-                /* start interrupt read for ATEN2011               *
-                 * will continue as long as ATEN2011 is connected  */
-
-                response =
-                    usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
-                                   GFP_KERNEL);
-                if (response) {
-                        dbg("%s - Error %d submitting interrupt urb",
-                                __func__, response);
-                }
-
-        }
-
-        /*
-         * See if we've set up our endpoint info yet
-         * (can't set it up in ATEN2011_startup as the
-         * structures were not set up at that time.)
-         */
-
-        dbg("port number is %d", port->number);
-        dbg("serial number is %d", port->serial->minor);
-        dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
-        dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
-        dbg("Interrupt endpoint is %d",
-                port->interrupt_in_endpointAddress);
-        dbg("port's number in the device is %d", ATEN2011_port->port_num);
-        ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
-        ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
-        ATEN2011_port->read_urb = port->read_urb;
-        ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
-        minor = port->serial->minor;
-        if (minor == SERIAL_TTY_NO_MINOR)
-                minor = 0;
-
-        /* set up our bulk in urb */
-        if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-            && (((__u16) port->number - (__u16) (minor)) != 0)) {
-                usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
-                                  usb_rcvbulkpipe(serial->dev,
-                                                  (port->
-                                                   bulk_in_endpointAddress +
-                                                   2)), port->bulk_in_buffer,
-                                  ATEN2011_port->read_urb->
-                                  transfer_buffer_length,
-                                  ATEN2011_bulk_in_callback, ATEN2011_port);
-        } else
-                usb_fill_bulk_urb(ATEN2011_port->read_urb,
-                                  serial->dev,
-                                  usb_rcvbulkpipe(serial->dev,
-                                                  port->
-                                                  bulk_in_endpointAddress),
-                                  port->bulk_in_buffer,
-                                  ATEN2011_port->read_urb->
-                                  transfer_buffer_length,
-                                  ATEN2011_bulk_in_callback, ATEN2011_port);
-
-        dbg("ATEN2011_open: bulkin endpoint is %d",
-                port->bulk_in_endpointAddress);
-        response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
-        if (response) {
-                err("%s - Error %d submitting control urb", __func__,
-                    response);
-        }
-
-        /* initialize our wait queues */
-        init_waitqueue_head(&ATEN2011_port->wait_chase);
-        init_waitqueue_head(&ATEN2011_port->wait_command);
-
-        /* initialize our icount structure */
-        memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
-        /* initialize our port settings */
-        ATEN2011_port->shadowMCR = MCR_MASTER_IE;       /* Must set to enable ints! */
-        ATEN2011_port->chaseResponsePending = 0;
-        /* send a open port command */
-        ATEN2011_port->open = 1;
-        /* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
-        /* Setup termios */
-        ATEN2011_set_termios(tty, port, &tmp_termios);
-        ATEN2011_port->icount.tx = 0;
-        ATEN2011_port->icount.rx = 0;
-
-        dbg("usb_serial serial:%x       ATEN2011_port:%x\nATEN2011_serial:%x      usb_serial_port port:%x",
-             (unsigned int)serial, (unsigned int)ATEN2011_port,
-             (unsigned int)ATEN2011_serial, (unsigned int)port);
-
-        return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        int i;
-        int chars = 0;
-        struct ATENINTL_port *ATEN2011_port;
-
-        /* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-        if (ATEN2011_port == NULL) {
-                dbg("%s", "ATEN2011_break:leaving ...........");
-                return -1;
-        }
-
-        for (i = 0; i < NUM_URBS; ++i)
-                if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
-                        chars += URB_TRANSFER_BUFFER_SIZE;
-
-        dbg("%s - returns %d", __func__, chars);
-        return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
-                                          struct ATENINTL_port *ATEN2011_port)
-{
-        int timeout = HZ / 10;
-        int wait = 30;
-        int count;
-
-        while (1) {
-                count = ATEN2011_chars_in_buffer(tty);
-
-                /* Check for Buffer status */
-                if (count <= 0)
-                        return;
-
-                /* Block the thread for a while */
-                interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-                                               timeout);
-
-                /* No activity.. count down section */
-                wait--;
-                if (wait == 0) {
-                        dbg("%s - TIMEOUT", __func__);
-                        return;
-                } else {
-                        /* Reset timout value back to seconds */
-                        wait = 30;
-                }
-        }
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
-                           struct file *filp)
-{
-        struct usb_serial *serial;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct ATENINTL_port *ATEN2011_port;
-        int no_urbs;
-        __u16 Data;
-
-        dbg("%s", "ATEN2011_close:entering...");
-        serial = port->serial;
-
-        /* take the Adpater and port's private data */
-        ATEN2011_serial = usb_get_serial_data(serial);
-        ATEN2011_port = usb_get_serial_port_data(port);
-        if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-                return;
-
-        if (serial->dev) {
-                /* flush and block(wait) until tx is empty */
-                ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
-        }
-        /* kill the ports URB's */
-        for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
-                usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-        /* Freeing Write URBs */
-        for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
-                kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
-                usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-        }
-        /* While closing port, shutdown all bulk read, write  *
-         * and interrupt read if they exists                  */
-        if (serial->dev) {
-                if (ATEN2011_port->write_urb) {
-                        dbg("%s", "Shutdown bulk write");
-                        usb_kill_urb(ATEN2011_port->write_urb);
-                }
-                if (ATEN2011_port->read_urb) {
-                        dbg("%s", "Shutdown bulk read");
-                        usb_kill_urb(ATEN2011_port->read_urb);
-                }
-                if ((&ATEN2011_port->control_urb)) {
-                        dbg("%s", "Shutdown control read");
-                        /* usb_kill_urb (ATEN2011_port->control_urb); */
-
-                }
-        }
-        /* if(ATEN2011_port->ctrl_buf != NULL) */
-                /* kfree(ATEN2011_port->ctrl_buf); */
-        /* decrement the no.of open ports counter of an individual USB-serial adapter. */
-        ATEN2011_serial->NoOfOpenPorts--;
-        dbg("NoOfOpenPorts in close%d:in port%d",
-                ATEN2011_serial->NoOfOpenPorts, port->number);
-        if (ATEN2011_serial->NoOfOpenPorts == 0) {
-                /* stop the stus polling here */
-                ATEN2011_serial->status_polling_started = 0;
-                if (ATEN2011_serial->interrupt_read_urb) {
-                        dbg("%s", "Shutdown interrupt_read_urb");
-                        /* ATEN2011_serial->interrupt_in_buffer=NULL; */
-                        /* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
-                }
-        }
-        if (ATEN2011_port->write_urb) {
-                /* if this urb had a transfer buffer already (old tx) free it */
-                kfree(ATEN2011_port->write_urb->transfer_buffer);
-                usb_free_urb(ATEN2011_port->write_urb);
-        }
-
-        /* clear the MCR & IER */
-        Data = 0x00;
-        set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-        Data = 0x00;
-        set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-        ATEN2011_port->open = 0;
-        dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
-                                                struct ATENINTL_port
-                                                *ATEN2011_port)
-{
-        int timeout = 1 * HZ;
-        int wait = 10;
-        int count;
-
-        while (1) {
-                count = ATEN2011_chars_in_buffer(tty);
-
-                /* Check for Buffer status */
-                if (count <= 0) {
-                        ATEN2011_port->chaseResponsePending = 0;
-                        return;
-                }
-
-                /* Block the thread for a while */
-                interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-                                               timeout);
-                /* No activity.. count down section */
-                wait--;
-                if (wait == 0) {
-                        dbg("%s - TIMEOUT", __func__);
-                        return;
-                } else {
-                        /* Reset timout value back to seconds */
-                        wait = 10;
-                }
-        }
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        unsigned char data;
-        struct usb_serial *serial;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct ATENINTL_port *ATEN2011_port;
-
-        dbg("%s", "Entering ...........");
-        dbg("ATEN2011_break: Start");
-
-        serial = port->serial;
-
-        ATEN2011_serial = usb_get_serial_data(serial);
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-                return;
-
-        /* flush and chase */
-        ATEN2011_port->chaseResponsePending = 1;
-
-        if (serial->dev) {
-                /* flush and block until tx is empty */
-                ATEN2011_block_until_chase_response(tty, ATEN2011_port);
-        }
-
-        if (break_state == -1)
-                data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
-        else
-                data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
-        ATEN2011_port->shadowLCR = data;
-        dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
-                ATEN2011_port->shadowLCR);
-        set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
-        return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        int i;
-        int room = 0;
-        struct ATENINTL_port *ATEN2011_port;
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-        if (ATEN2011_port == NULL) {
-                dbg("%s", "ATEN2011_break:leaving ...........");
-                return -1;
-        }
-
-        for (i = 0; i < NUM_URBS; ++i)
-                if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
-                        room += URB_TRANSFER_BUFFER_SIZE;
-
-        dbg("%s - returns %d", __func__, room);
-        return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
-                          const unsigned char *data, int count)
-{
-        int status;
-        int i;
-        int bytes_sent = 0;
-        int transfer_size;
-        int minor;
-
-        struct ATENINTL_port *ATEN2011_port;
-        struct usb_serial *serial;
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct urb *urb;
-        const unsigned char *current_position = data;
-        unsigned char *data1;
-        dbg("%s", "entering ...........");
-
-        serial = port->serial;
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-        if (ATEN2011_port == NULL) {
-                dbg("%s", "ATEN2011_port is NULL");
-                return -1;
-        }
-
-        ATEN2011_serial = usb_get_serial_data(serial);
-        if (ATEN2011_serial == NULL) {
-                dbg("%s", "ATEN2011_serial is NULL");
-                return -1;
-        }
-
-        /* try to find a free urb in the list */
-        urb = NULL;
-
-        for (i = 0; i < NUM_URBS; ++i) {
-                if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
-                        urb = ATEN2011_port->write_urb_pool[i];
-                        dbg("URB:%d", i);
-                        break;
-                }
-        }
-
-        if (urb == NULL) {
-                dbg("%s - no more free urbs", __func__);
-                goto exit;
-        }
-
-        if (urb->transfer_buffer == NULL) {
-                urb->transfer_buffer =
-                    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
-                if (urb->transfer_buffer == NULL) {
-                        err("%s no more kernel memory...", __func__);
-                        goto exit;
-                }
-        }
-        transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-        memcpy(urb->transfer_buffer, current_position, transfer_size);
-        /* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
-        /* fill urb with data and submit  */
-        minor = port->serial->minor;
-        if (minor == SERIAL_TTY_NO_MINOR)
-                minor = 0;
-        if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-            && (((__u16) port->number - (__u16) (minor)) != 0)) {
-                usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
-                                  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-                                                  (port->
-                                                   bulk_out_endpointAddress) +
-                                                  2), urb->transfer_buffer,
-                                  transfer_size,
-                                  ATEN2011_bulk_out_data_callback,
-                                  ATEN2011_port);
-        } else
-
-                usb_fill_bulk_urb(urb,
-                                  ATEN2011_serial->serial->dev,
-                                  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-                                                  port->
-                                                  bulk_out_endpointAddress),
-                                  urb->transfer_buffer, transfer_size,
-                                  ATEN2011_bulk_out_data_callback,
-                                  ATEN2011_port);
-
-        data1 = urb->transfer_buffer;
-        dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
-        /* for(i=0;i < urb->actual_length;i++) */
-                /* dbg("Data is %c ",data1[i]); */
-
-        /* send it down the pipe */
-        status = usb_submit_urb(urb, GFP_ATOMIC);
-
-        if (status) {
-                err("%s - usb_submit_urb(write bulk) failed with status = %d",
-                    __func__, status);
-                bytes_sent = status;
-                goto exit;
-        }
-        bytes_sent = transfer_size;
-        ATEN2011_port->icount.tx += transfer_size;
-        dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
-        return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct ATENINTL_port *ATEN2011_port;
-        int status;
-
-        dbg("- port %d", port->number);
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return;
-
-        if (!ATEN2011_port->open) {
-                dbg("%s", "port not opened");
-                return;
-        }
-
-        dbg("%s", "Entering .......... ");
-
-        if (!tty) {
-                dbg("%s - no tty available", __func__);
-                return;
-        }
-
-        /* if we are implementing XON/XOFF, send the stop character */
-        if (I_IXOFF(tty)) {
-                unsigned char stop_char = STOP_CHAR(tty);
-                status = ATEN2011_write(tty, port, &stop_char, 1);
-                if (status <= 0)
-                        return;
-        }
-
-        /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
-                ATEN2011_port->shadowMCR &= ~MCR_RTS;
-                status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-                                      ATEN2011_port->shadowMCR);
-                if (status < 0)
-                        return;
-        }
-
-        return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        int status;
-        struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return;
-
-        if (!ATEN2011_port->open) {
-                dbg("%s - port not opened", __func__);
-                return;
-        }
-
-        dbg("%s", "Entering .......... ");
-
-        if (!tty) {
-                dbg("%s - no tty available", __func__);
-                return;
-        }
-
-        /* if we are implementing XON/XOFF, send the start character */
-        if (I_IXOFF(tty)) {
-                unsigned char start_char = START_CHAR(tty);
-                status = ATEN2011_write(tty, port, &start_char, 1);
-                if (status <= 0)
-                        return;
-        }
-
-        /* if we are implementing RTS/CTS, toggle that line */
-        if (tty->termios->c_cflag & CRTSCTS) {
-                ATEN2011_port->shadowMCR |= MCR_RTS;
-                status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-                                      ATEN2011_port->shadowMCR);
-                if (status < 0)
-                        return;
-        }
-
-        return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct ATENINTL_port *ATEN2011_port;
-        unsigned int result;
-        __u16 msr;
-        __u16 mcr;
-        /* unsigned int mcr; */
-        int status = 0;
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        dbg("%s - port %d", __func__, port->number);
-
-        if (ATEN2011_port == NULL)
-                return -ENODEV;
-
-        status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
-        status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
-        /* mcr = ATEN2011_port->shadowMCR; */
-        /* COMMENT2: the Fallowing three line are commented for updating only MSR values */
-        result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
-            | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
-            | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
-            | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
-            | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
-            | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
-            | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
-        dbg("%s - 0x%04X", __func__, result);
-
-        return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
-                             unsigned int set, unsigned int clear)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct ATENINTL_port *ATEN2011_port;
-        unsigned int mcr;
-        unsigned int status;
-
-        dbg("%s - port %d", __func__, port->number);
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return -ENODEV;
-
-        mcr = ATEN2011_port->shadowMCR;
-        if (clear & TIOCM_RTS)
-                mcr &= ~MCR_RTS;
-        if (clear & TIOCM_DTR)
-                mcr &= ~MCR_DTR;
-        if (clear & TIOCM_LOOP)
-                mcr &= ~MCR_LOOPBACK;
-
-        if (set & TIOCM_RTS)
-                mcr |= MCR_RTS;
-        if (set & TIOCM_DTR)
-                mcr |= MCR_DTR;
-        if (set & TIOCM_LOOP)
-                mcr |= MCR_LOOPBACK;
-
-        ATEN2011_port->shadowMCR = mcr;
-
-        status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
-        if (status < 0) {
-                dbg("setting MODEM_CONTROL_REGISTER Failed");
-                return -1;
-        }
-
-        return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-                                 struct usb_serial_port *port,
-                                 struct ktermios *old_termios)
-{
-        int status;
-        unsigned int cflag;
-        struct usb_serial *serial;
-        struct ATENINTL_port *ATEN2011_port;
-
-        dbg("ATEN2011_set_termios: START");
-
-        serial = port->serial;
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return;
-
-        if (!ATEN2011_port->open) {
-                dbg("%s - port not opened", __func__);
-                return;
-        }
-
-        dbg("%s", "setting termios - ");
-
-        cflag = tty->termios->c_cflag;
-
-        dbg("%s - cflag %08x iflag %08x", __func__,
-            tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
-        if (old_termios) {
-                dbg("%s - old clfag %08x old iflag %08x", __func__,
-                    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-        }
-
-        dbg("%s - port %d", __func__, port->number);
-
-        /* change the port settings to the new ones specified */
-
-        ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
-        if (!ATEN2011_port->read_urb) {
-                dbg("%s", "URB KILLED !!!!!");
-                return;
-        }
-
-        if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-                ATEN2011_port->read_urb->dev = serial->dev;
-                status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-                if (status) {
-                        dbg
-                            (" usb_submit_urb(read bulk) failed, status = %d",
-                             status);
-                }
-        }
-        return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
-                        struct ATENINTL_port *ATEN2011_port,
-                        unsigned int __user *value)
-{
-        int count;
-        unsigned int result = 0;
-
-        count = ATEN2011_chars_in_buffer(tty);
-        if (count == 0) {
-                dbg("%s -- Empty", __func__);
-                result = TIOCSER_TEMT;
-        }
-
-        if (copy_to_user(value, &result, sizeof(int)))
-                return -EFAULT;
-        return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
-                                  struct ATENINTL_port *ATEN2011_port,
-                                  unsigned int __user *value)
-{
-        unsigned int result = 0;
-
-        if (!tty)
-                return -ENOIOCTLCMD;
-
-        result = tty->read_cnt;
-
-        dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
-        if (copy_to_user(value, &result, sizeof(int)))
-                return -EFAULT;
-
-        return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
-                          unsigned int __user *value)
-{
-        unsigned int mcr;
-        unsigned int arg;
-        __u16 Data;
-        int status;
-        struct usb_serial_port *port;
-
-        if (ATEN2011_port == NULL)
-                return -1;
-
-        port = (struct usb_serial_port *)ATEN2011_port->port;
-
-        mcr = ATEN2011_port->shadowMCR;
-
-        if (copy_from_user(&arg, value, sizeof(int)))
-                return -EFAULT;
-
-        switch (cmd) {
-        case TIOCMBIS:
-                if (arg & TIOCM_RTS)
-                        mcr |= MCR_RTS;
-                if (arg & TIOCM_DTR)
-                        mcr |= MCR_RTS;
-                if (arg & TIOCM_LOOP)
-                        mcr |= MCR_LOOPBACK;
-                break;
-
-        case TIOCMBIC:
-                if (arg & TIOCM_RTS)
-                        mcr &= ~MCR_RTS;
-                if (arg & TIOCM_DTR)
-                        mcr &= ~MCR_RTS;
-                if (arg & TIOCM_LOOP)
-                        mcr &= ~MCR_LOOPBACK;
-                break;
-
-        case TIOCMSET:
-                /* turn off the RTS and DTR and LOOPBACK
-                 * and then only turn on what was asked to */
-                mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-                mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-                mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-                mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-                break;
-        }
-
-        ATEN2011_port->shadowMCR = mcr;
-
-        Data = ATEN2011_port->shadowMCR;
-        status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-        if (status < 0) {
-                dbg("setting MODEM_CONTROL_REGISTER Failed");
-                return -1;
-        }
-
-        return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
-                          unsigned int __user *value)
-{
-        unsigned int result = 0;
-        __u16 msr;
-        unsigned int mcr = ATEN2011_port->shadowMCR;
-        int status;
-
-        status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
-        result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)      /* 0x002 */
-            |((mcr & MCR_RTS) ? TIOCM_RTS : 0)  /* 0x004 */
-            |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */
-            |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)  /* 0x040 */
-            |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)   /* 0x080 */
-            |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);        /* 0x100 */
-
-        dbg("%s -- %x", __func__, result);
-
-        if (copy_to_user(value, &result, sizeof(int)))
-                return -EFAULT;
-        return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
-                           struct serial_struct __user *retinfo)
-{
-        struct serial_struct tmp;
-
-        if (ATEN2011_port == NULL)
-                return -1;
-
-        if (!retinfo)
-                return -EFAULT;
-
-        memset(&tmp, 0, sizeof(tmp));
-
-        tmp.type = PORT_16550A;
-        tmp.line = ATEN2011_port->port->serial->minor;
-        if (tmp.line == SERIAL_TTY_NO_MINOR)
-                tmp.line = 0;
-        tmp.port = ATEN2011_port->port->number;
-        tmp.irq = 0;
-        tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-        tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
-        tmp.baud_base = 9600;
-        tmp.close_delay = 5 * HZ;
-        tmp.closing_wait = 30 * HZ;
-
-        if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-                return -EFAULT;
-        return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
-                          unsigned int cmd, unsigned long arg)
-{
-        struct usb_serial_port *port = tty->driver_data;
-        struct ATENINTL_port *ATEN2011_port;
-        struct async_icount cnow;
-        struct async_icount cprev;
-        struct serial_icounter_struct icount;
-        int ATENret = 0;
-        unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-        ATEN2011_port = usb_get_serial_port_data(port);
-
-        if (ATEN2011_port == NULL)
-                return -1;
-
-        dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
-        switch (cmd) {
-                /* return number of bytes available */
-
-        case TIOCINQ:
-                dbg("%s (%d) TIOCINQ", __func__, port->number);
-                return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
-                break;
-
-        case TIOCOUTQ:
-                dbg("%s (%d) TIOCOUTQ", __func__, port->number);
-                return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
-                break;
-
-        case TIOCSERGETLSR:
-                dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-                return get_lsr_info(tty, ATEN2011_port, user_arg);
-                return 0;
-
-        case TIOCMBIS:
-        case TIOCMBIC:
-        case TIOCMSET:
-                dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-                    port->number);
-                ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
-                return ATENret;
-
-        case TIOCMGET:
-                dbg("%s (%d) TIOCMGET", __func__, port->number);
-                return get_modem_info(ATEN2011_port, user_arg);
-
-        case TIOCGSERIAL:
-                dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
-                return get_serial_info(ATEN2011_port,
-                                       (struct serial_struct __user *)arg);
-
-        case TIOCSSERIAL:
-                dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
-                break;
-
-        case TIOCMIWAIT:
-                dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
-                cprev = ATEN2011_port->icount;
-                while (1) {
-                        /* see if a signal did it */
-                        if (signal_pending(current))
-                                return -ERESTARTSYS;
-                        cnow = ATEN2011_port->icount;
-                        if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-                            cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-                                return -EIO;    /* no change => error */
-                        if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-                            ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-                            ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-                            ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-                                return 0;
-                        }
-                        cprev = cnow;
-                }
-                /* NOTREACHED */
-                break;
-
-        case TIOCGICOUNT:
-                cnow = ATEN2011_port->icount;
-                icount.cts = cnow.cts;
-                icount.dsr = cnow.dsr;
-                icount.rng = cnow.rng;
-                icount.dcd = cnow.dcd;
-                icount.rx = cnow.rx;
-                icount.tx = cnow.tx;
-                icount.frame = cnow.frame;
-                icount.overrun = cnow.overrun;
-                icount.parity = cnow.parity;
-                icount.brk = cnow.brk;
-                icount.buf_overrun = cnow.buf_overrun;
-
-                dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-                    port->number, icount.rx, icount.tx);
-                if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-                        return -EFAULT;
-                return 0;
-
-        default:
-                break;
-        }
-
-        return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
-                                           __u16 *clk_sel_val)
-{
-        dbg("%s - %d", __func__, baudRate);
-
-        if (baudRate <= 115200) {
-                *divisor = 115200 / baudRate;
-                *clk_sel_val = 0x0;
-        }
-        if ((baudRate > 115200) && (baudRate <= 230400)) {
-                *divisor = 230400 / baudRate;
-                *clk_sel_val = 0x10;
-        } else if ((baudRate > 230400) && (baudRate <= 403200)) {
-                *divisor = 403200 / baudRate;
-                *clk_sel_val = 0x20;
-        } else if ((baudRate > 403200) && (baudRate <= 460800)) {
-                *divisor = 460800 / baudRate;
-                *clk_sel_val = 0x30;
-        } else if ((baudRate > 460800) && (baudRate <= 806400)) {
-                *divisor = 806400 / baudRate;
-                *clk_sel_val = 0x40;
-        } else if ((baudRate > 806400) && (baudRate <= 921600)) {
-                *divisor = 921600 / baudRate;
-                *clk_sel_val = 0x50;
-        } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
-                *divisor = 1572864 / baudRate;
-                *clk_sel_val = 0x60;
-        } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
-                *divisor = 3145728 / baudRate;
-                *clk_sel_val = 0x70;
-        }
-        return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
-                                             *ATEN2011_port, int baudRate)
-{
-        int divisor = 0;
-        int status;
-        __u16 Data;
-        unsigned char number;
-        __u16 clk_sel_val;
-        struct usb_serial_port *port;
-        int minor;
-
-        if (ATEN2011_port == NULL)
-                return -1;
-
-        port = (struct usb_serial_port *)ATEN2011_port->port;
-
-        dbg("%s", "Entering .......... ");
-
-        minor = ATEN2011_port->port->serial->minor;
-        if (minor == SERIAL_TTY_NO_MINOR)
-                minor = 0;
-        number = ATEN2011_port->port->number - minor;
-
-        dbg("%s - port = %d, baud = %d", __func__,
-            ATEN2011_port->port->number, baudRate);
-        /* reset clk_uart_sel in spregOffset */
-        if (baudRate > 115200) {
-#ifdef HW_flow_control
-                /*
-                 * NOTE: need to see the pther register to modify
-                 * setting h/w flow control bit to 1;
-                 */
-                /* Data = ATEN2011_port->shadowMCR; */
-                Data = 0x2b;
-                ATEN2011_port->shadowMCR = Data;
-                status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-                if (status < 0) {
-                        dbg("Writing spreg failed in set_serial_baud");
-                        return -1;
-                }
-#endif
-
-        } else {
-#ifdef HW_flow_control
-                /* setting h/w flow control bit to 0; */
-                /* Data = ATEN2011_port->shadowMCR; */
-                Data = 0xb;
-                ATEN2011_port->shadowMCR = Data;
-                status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-                if (status < 0) {
-                        dbg("Writing spreg failed in set_serial_baud");
-                        return -1;
-                }
-#endif
-
-        }
-
-        if (1)                  /* baudRate <= 115200) */ {
-                clk_sel_val = 0x0;
-                Data = 0x0;
-                status =
-                    ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
-                                                    &clk_sel_val);
-                status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-                if (status < 0) {
-                        dbg("reading spreg failed in set_serial_baud");
-                        return -1;
-                }
-                Data = (Data & 0x8f) | clk_sel_val;
-                status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-                if (status < 0) {
-                        dbg("Writing spreg failed in set_serial_baud");
-                        return -1;
-                }
-                /* Calculate the Divisor */
-
-                if (status) {
-                        err("%s - bad baud rate", __func__);
-                        dbg("%s", "bad baud rate");
-                        return status;
-                }
-                /* Enable access to divisor latch */
-                Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
-                ATEN2011_port->shadowLCR = Data;
-                set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-                /* Write the divisor */
-                Data = (unsigned char)(divisor & 0xff);
-                dbg("set_serial_baud Value to write DLL is %x", Data);
-                set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-                Data = (unsigned char)((divisor & 0xff00) >> 8);
-                dbg("set_serial_baud Value to write DLM is %x", Data);
-                set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-                /* Disable access to divisor latch */
-                Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
-                ATEN2011_port->shadowLCR = Data;
-                set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-        }
-
-        return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-                                          struct ATENINTL_port *ATEN2011_port,
-                                          struct ktermios *old_termios)
-{
-        int baud;
-        unsigned cflag;
-        unsigned iflag;
-        __u8 lData;
-        __u8 lParity;
-        __u8 lStop;
-        int status;
-        __u16 Data;
-        struct usb_serial_port *port;
-        struct usb_serial *serial;
-
-        if (ATEN2011_port == NULL)
-                return;
-
-        port = (struct usb_serial_port *)ATEN2011_port->port;
-
-        serial = port->serial;
-
-        dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
-        if (!ATEN2011_port->open) {
-                dbg("%s - port not opened", __func__);
-                return;
-        }
-
-        if ((!tty) || (!tty->termios)) {
-                dbg("%s - no tty structures", __func__);
-                return;
-        }
-
-        dbg("%s", "Entering .......... ");
-
-        lData = LCR_BITS_8;
-        lStop = LCR_STOP_1;
-        lParity = LCR_PAR_NONE;
-
-        cflag = tty->termios->c_cflag;
-        iflag = tty->termios->c_iflag;
-
-        /* Change the number of bits */
-
-        /* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
-        /* if(cflag & CSIZE) */
-        {
-                switch (cflag & CSIZE) {
-                case CS5:
-                        lData = LCR_BITS_5;
-                        break;
-
-                case CS6:
-                        lData = LCR_BITS_6;
-                        break;
-
-                case CS7:
-                        lData = LCR_BITS_7;
-                        break;
-                default:
-                case CS8:
-                        lData = LCR_BITS_8;
-                        break;
-                }
-        }
-        /* Change the Parity bit */
-        if (cflag & PARENB) {
-                if (cflag & PARODD) {
-                        lParity = LCR_PAR_ODD;
-                        dbg("%s - parity = odd", __func__);
-                } else {
-                        lParity = LCR_PAR_EVEN;
-                        dbg("%s - parity = even", __func__);
-                }
-
-        } else {
-                dbg("%s - parity = none", __func__);
-        }
-
-        if (cflag & CMSPAR)
-                lParity = lParity | 0x20;
-
-        /* Change the Stop bit */
-        if (cflag & CSTOPB) {
-                lStop = LCR_STOP_2;
-                dbg("%s - stop bits = 2", __func__);
-        } else {
-                lStop = LCR_STOP_1;
-                dbg("%s - stop bits = 1", __func__);
-        }
-
-        /* Update the LCR with the correct value */
-        ATEN2011_port->shadowLCR &=
-            ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
-        ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
-        dbg
-            ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
-             ATEN2011_port->shadowLCR);
-        /* Disable Interrupts */
-        Data = 0x00;
-        set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-        Data = 0x00;
-        set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-        Data = 0xcf;
-        set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-        /* Send the updated LCR value to the ATEN2011 */
-        Data = ATEN2011_port->shadowLCR;
-
-        set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-        Data = 0x00b;
-        ATEN2011_port->shadowMCR = Data;
-        set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-        Data = 0x00b;
-        set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-        /* set up the MCR register and send it to the ATEN2011 */
-
-        ATEN2011_port->shadowMCR = MCR_MASTER_IE;
-        if (cflag & CBAUD)
-                ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
-        if (cflag & CRTSCTS)
-                ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
-        else
-                ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
-        Data = ATEN2011_port->shadowMCR;
-        set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-        /* Determine divisor based on baud rate */
-        baud = tty_get_baud_rate(tty);
-
-        if (!baud) {
-                /* pick a default, any default... */
-                dbg("%s", "Picked default baud...");
-                baud = 9600;
-        }
-
-        dbg("%s - baud rate = %d", __func__, baud);
-        status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
-        /* Enable Interrupts */
-        Data = 0x0c;
-        set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-        if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-                ATEN2011_port->read_urb->dev = serial->dev;
-
-                status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
-                if (status) {
-                        dbg
-                            (" usb_submit_urb(read bulk) failed, status = %d",
-                             status);
-                }
-        }
-        dbg
-            ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
-             ATEN2011_port->shadowLCR);
-
-        return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
-        __u16 Data = 0x00;
-        int ret = 0;
-        int ATEN2011_2or4ports;
-        ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-                              ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
-                              &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
-        if ((Data & 0x01) == 0) {
-                ATEN2011_2or4ports = 2;
-                serial->type->num_ports = 2;
-                serial->num_ports = 2;
-        }
-        /* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
-        else {
-                ATEN2011_2or4ports = 4;
-                serial->type->num_ports = 4;
-                serial->num_ports = 4;
-
-        }
-
-        return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
-        struct ATENINTL_serial *ATEN2011_serial;
-        struct ATENINTL_port *ATEN2011_port;
-        struct usb_device *dev;
-        int i, status;
-        int minor;
-
-        __u16 Data;
-        dbg("%s", " ATEN2011_startup :entering..........");
-
-        if (!serial) {
-                dbg("%s", "Invalid Handler");
-                return -1;
-        }
-
-        dev = serial->dev;
-
-        dbg("%s", "Entering...");
-
-        /* create our private serial structure */
-        ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
-        if (ATEN2011_serial == NULL) {
-                err("%s - Out of memory", __func__);
-                return -ENOMEM;
-        }
-
-        /* resetting the private structure field values to zero */
-        memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
-        ATEN2011_serial->serial = serial;
-        /* initilize status polling flag to 0 */
-        ATEN2011_serial->status_polling_started = 0;
-
-        usb_set_serial_data(serial, ATEN2011_serial);
-        ATEN2011_serial->ATEN2011_spectrum_2or4ports =
-            ATEN2011_calc_num_ports(serial);
-        /* we set up the pointers to the endpoints in the ATEN2011_open *
-         * function, as the structures aren't created yet.             */
-
-        /* set up port private structures */
-        for (i = 0; i < serial->num_ports; ++i) {
-                ATEN2011_port =
-                    kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
-                if (ATEN2011_port == NULL) {
-                        err("%s - Out of memory", __func__);
-                        usb_set_serial_data(serial, NULL);
-                        kfree(ATEN2011_serial);
-                        return -ENOMEM;
-                }
-                memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
-                /*
-                 * Initialize all port interrupt end point to port 0
-                 * int endpoint. Our device has only one interrupt end point
-                 * comman to all port
-                 */
-                /* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
-                ATEN2011_port->port = serial->port[i];
-                usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-                minor = serial->port[i]->serial->minor;
-                if (minor == SERIAL_TTY_NO_MINOR)
-                        minor = 0;
-                ATEN2011_port->port_num =
-                    ((serial->port[i]->number - minor) + 1);
-
-                if (ATEN2011_port->port_num == 1) {
-                        ATEN2011_port->SpRegOffset = 0x0;
-                        ATEN2011_port->ControlRegOffset = 0x1;
-                        ATEN2011_port->DcrRegOffset = 0x4;
-                } else if ((ATEN2011_port->port_num == 2)
-                           && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-                               4)) {
-                        ATEN2011_port->SpRegOffset = 0x8;
-                        ATEN2011_port->ControlRegOffset = 0x9;
-                        ATEN2011_port->DcrRegOffset = 0x16;
-                } else if ((ATEN2011_port->port_num == 2)
-                           && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-                               2)) {
-                        ATEN2011_port->SpRegOffset = 0xa;
-                        ATEN2011_port->ControlRegOffset = 0xb;
-                        ATEN2011_port->DcrRegOffset = 0x19;
-                } else if ((ATEN2011_port->port_num == 3)
-                           && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-                               4)) {
-                        ATEN2011_port->SpRegOffset = 0xa;
-                        ATEN2011_port->ControlRegOffset = 0xb;
-                        ATEN2011_port->DcrRegOffset = 0x19;
-                } else if ((ATEN2011_port->port_num == 4)
-                           && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-                               4)) {
-                        ATEN2011_port->SpRegOffset = 0xc;
-                        ATEN2011_port->ControlRegOffset = 0xd;
-                        ATEN2011_port->DcrRegOffset = 0x1c;
-                }
-
-                usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-                /* enable rx_disable bit in control register */
-
-                status = get_reg_sync(serial->port[i],
-                                      ATEN2011_port->ControlRegOffset, &Data);
-                if (status < 0) {
-                        dbg("Reading ControlReg failed status-0x%x",
-                                status);
-                        break;
-                } else
-                        dbg
-                            ("ControlReg Reading success val is %x, status%d",
-                             Data, status);
-                Data |= 0x08;   /* setting driver done bit */
-                Data |= 0x04;   /* sp1_bit to have cts change reflect in modem status reg */
-
-                /* Data |= 0x20; */     /* rx_disable bit */
-                status = set_reg_sync(serial->port[i],
-                                      ATEN2011_port->ControlRegOffset, Data);
-                if (status < 0) {
-                        dbg
-                            ("Writing ControlReg failed(rx_disable) status-0x%x",
-                             status);
-                        break;
-                } else
-                        dbg
-                            ("ControlReg Writing success(rx_disable) status%d",
-                             status);
-
-                /*
-                 * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
-                 * and 0x24 in DCR3
-                 */
-                Data = 0x01;
-                status = set_reg_sync(serial->port[i],
-                                      (__u16)(ATEN2011_port->DcrRegOffset + 0),
-                                      Data);
-                if (status < 0) {
-                        dbg("Writing DCR0 failed status-0x%x", status);
-                        break;
-                } else
-                        dbg("DCR0 Writing success status%d", status);
-
-                Data = 0x05;
-                status = set_reg_sync(serial->port[i],
-                                      (__u16)(ATEN2011_port->DcrRegOffset + 1),
-                                      Data);
-                if (status < 0) {
-                        dbg("Writing DCR1 failed status-0x%x", status);
-                        break;
-                } else
-                        dbg("DCR1 Writing success status%d", status);
-
-                Data = 0x24;
-                status = set_reg_sync(serial->port[i],
-                                      (__u16)(ATEN2011_port->DcrRegOffset + 2),
-                                      Data);
-                if (status < 0) {
-                        dbg("Writing DCR2 failed status-0x%x", status);
-                        break;
-                } else
-                        dbg("DCR2 Writing success status%d", status);
-
-                /* write values in clkstart0x0 and clkmulti 0x20 */
-                Data = 0x0;
-                status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
-                                      Data);
-                if (status < 0) {
-                        dbg
-                            ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
-                             status);
-                        break;
-                } else
-                        dbg
-                            ("CLK_START_VALUE_REGISTER Writing success status%d",
-                             status);
-
-                Data = 0x20;
-                status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-                                      Data);
-                if (status < 0) {
-                        dbg
-                            ("Writing CLK_MULTI_REGISTER failed status-0x%x",
-                             status);
-                        break;
-                } else
-                        dbg("CLK_MULTI_REGISTER Writing success status%d",
-                                status);
-
-                /* Zero Length flag register */
-                if ((ATEN2011_port->port_num != 1)
-                    && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
-                        Data = 0xff;
-                        status = set_reg_sync(serial->port[i],
-                                              (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
-                                              Data);
-                        dbg("ZLIP offset%x",
-                                (__u16) (ZLP_REG1 +
-                                         ((__u16) ATEN2011_port->port_num)));
-                        if (status < 0) {
-                                dbg
-                                    ("Writing ZLP_REG%d failed status-0x%x",
-                                     i + 2, status);
-                                break;
-                        } else
-                                dbg("ZLP_REG%d Writing success status%d",
-                                        i + 2, status);
-                } else {
-                        Data = 0xff;
-                        status = set_reg_sync(serial->port[i],
-                                              (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
-                                              Data);
-                        dbg("ZLIP offset%x",
-                                (__u16) (ZLP_REG1 +
-                                         ((__u16) ATEN2011_port->port_num) -
-                                         0x1));
-                        if (status < 0) {
-                                dbg
-                                    ("Writing ZLP_REG%d failed status-0x%x",
-                                     i + 1, status);
-                                break;
-                        } else
-                                dbg("ZLP_REG%d Writing success status%d",
-                                        i + 1, status);
-
-                }
-                ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
-                ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
-        }
-
-        /* Zero Length flag enable */
-        Data = 0x0f;
-        status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
-        if (status < 0) {
-                dbg("Writing ZLP_REG5 failed status-0x%x", status);
-                return -1;
-        } else
-                dbg("ZLP_REG5 Writing success status%d", status);
-
-        /* setting configuration feature to one */
-        usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-                        (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
-        return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
-        int i;
-        struct ATENINTL_port *ATEN2011_port;
-
-        /* check for the ports to be closed,close the ports and disconnect */
-
-        /* free private structure allocated for serial port  *
-         * stop reads and writes on all ports                */
-
-        for (i = 0; i < serial->num_ports; ++i) {
-                ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-                kfree(ATEN2011_port->ctrl_buf);
-                usb_kill_urb(ATEN2011_port->control_urb);
-                kfree(ATEN2011_port);
-                usb_set_serial_port_data(serial->port[i], NULL);
-        }
-
-        /* free private structure allocated for serial device */
-
-        kfree(usb_get_serial_data(serial));
-        usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
-        .driver = {
-                .owner =        THIS_MODULE,
-                .name =         "aten2011",
-                },
-        .description =          DRIVER_DESC,
-        .id_table =             id_table,
-        .open =                 ATEN2011_open,
-        .close =                ATEN2011_close,
-        .write =                ATEN2011_write,
-        .write_room =           ATEN2011_write_room,
-        .chars_in_buffer =      ATEN2011_chars_in_buffer,
-        .throttle =             ATEN2011_throttle,
-        .unthrottle =           ATEN2011_unthrottle,
-        .calc_num_ports =       ATEN2011_calc_num_ports,
-
-        .ioctl =                ATEN2011_ioctl,
-        .set_termios =          ATEN2011_set_termios,
-        .break_ctl =            ATEN2011_break,
-        .tiocmget =             ATEN2011_tiocmget,
-        .tiocmset =             ATEN2011_tiocmset,
-        .attach =               ATEN2011_startup,
-        .release =              ATEN2011_release,
-        .read_bulk_callback =   ATEN2011_bulk_in_callback,
-        .read_int_callback =    ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
-        .name =         "aten2011",
-        .probe =        usb_serial_probe,
-        .disconnect =   usb_serial_disconnect,
-        .id_table =     id_table,
-};
-
-static int __init aten_init(void)
-{
-        int retval;
-
-        /* Register with the usb serial */
-        retval = usb_serial_register(&aten_serial_driver);
-        if (retval)
-                return retval;
-
-        printk(KERN_INFO KBUILD_MODNAME ":"
-               DRIVER_DESC " " DRIVER_VERSION "\n");
-
-        /* Register with the usb */
-        retval = usb_register(&aten_driver);
-        if (retval)
-                usb_serial_deregister(&aten_serial_driver);
-
-        return retval;
-}
-
-static void __exit aten_exit(void)
-{
-        usb_deregister(&aten_driver);
-        usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 0ab9d15f3439..f5416af1e902 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/mutex.h>
+#include <linux/vmalloc.h>
 
 #include "udlfb.h"
 
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 22f93dd0ba03..251220dc8851 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/tcp.h>
 #include <linux/in.h>
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index a10ed27acbc2..f43ca416e4a8 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -344,7 +344,7 @@ static CHIP_INFO chip_info_table[]= {
 };
 
 static struct pci_device_id device_id_table[] __devinitdata = {
-{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (int)&chip_info_table[0]},
+{ 0x1106, 0x3253, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long)&chip_info_table[0]},
 { 0, }
 };
 #endif
@@ -369,7 +369,7 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 
 #ifdef CONFIG_PM
 static int device_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
-static int viawget_suspend(struct pci_dev *pcid, u32 state);
+static int viawget_suspend(struct pci_dev *pcid, pm_message_t state);
 static int viawget_resume(struct pci_dev *pcid);
 struct notifier_block device_notifier = {
         notifier_call:  device_notify_reboot,
@@ -3941,7 +3941,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
         while ((pdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pdev)) != NULL) {
             if(pci_dev_driver(pdev) == &device_driver) {
                 if (pci_get_drvdata(pdev))
-                    viawget_suspend(pdev, 3);
+                    viawget_suspend(pdev, PMSG_HIBERNATE);
             }
         }
     }
@@ -3949,7 +3949,7 @@ device_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
 }
 
 static int
-viawget_suspend(struct pci_dev *pcid, u32 state)
+viawget_suspend(struct pci_dev *pcid, pm_message_t state)
 {
     int power_status;   // to silence the compiler
 
@@ -3971,7 +3971,7 @@ viawget_suspend(struct pci_dev *pcid, u32 state)
     memset(pMgmt->abyCurrBSSID, 0, 6);
     pMgmt->eCurrState = WMAC_STATE_IDLE;
     pci_disable_device(pcid);
-    power_status = pci_set_power_state(pcid, state);
+    power_status = pci_set_power_state(pcid, pci_choose_state(pcid, state));
     spin_unlock_irq(&pDevice->lock);
     return 0;
 }
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index a913efc69669..40de151f2789 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -257,6 +257,7 @@
 #include <linux/fs.h>           /* everything... */
 #include <linux/errno.h>        /* error codes */
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c
index b52cc830c0b4..f3873f650bb4 100644
--- a/drivers/telephony/phonedev.c
+++ b/drivers/telephony/phonedev.c
@@ -23,7 +23,6 @@
 #include <linux/errno.h>
 #include <linux/phonedev.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3f1045993474..e1f89416ef8c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -387,6 +387,7 @@ static void acm_rx_tasklet(unsigned long _acm)
         struct acm_ru *rcv;
         unsigned long flags;
         unsigned char throttled;
+        struct usb_host_endpoint *ep;
 
         dbg("Entering acm_rx_tasklet");
 
@@ -462,11 +463,20 @@ urbs:
 
                 rcv->buffer = buf;
 
-                usb_fill_bulk_urb(rcv->urb, acm->dev,
-                                  acm->rx_endpoint,
-                                  buf->base,
-                                  acm->readsize,
-                                  acm_read_bulk, rcv);
+                ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
+                                [usb_pipeendpoint(acm->rx_endpoint)];
+                if (usb_endpoint_xfer_int(&ep->desc))
+                        usb_fill_int_urb(rcv->urb, acm->dev,
+                                         acm->rx_endpoint,
+                                         buf->base,
+                                         acm->readsize,
+                                         acm_read_bulk, rcv, ep->desc.bInterval);
+                else
+                        usb_fill_bulk_urb(rcv->urb, acm->dev,
+                                          acm->rx_endpoint,
+                                          buf->base,
+                                          acm->readsize,
+                                          acm_read_bulk, rcv);
                 rcv->urb->transfer_dma = buf->dma;
                 rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
@@ -740,7 +750,7 @@ static int acm_tty_chars_in_buffer(struct tty_struct *tty)
 {
         struct acm *acm = tty->driver_data;
         if (!ACM_READY(acm))
-                return -EINVAL;
+                return 0;
         /*
          * This is inaccurate (overcounts), but it works.
          */
@@ -1227,9 +1237,14 @@ made_compressed_probe:
                         goto alloc_fail7;
                 }
 
-                usb_fill_bulk_urb(snd->urb, usb_dev,
-                        usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
-                        NULL, acm->writesize, acm_write_bulk, snd);
+                if (usb_endpoint_xfer_int(epwrite))
+                        usb_fill_int_urb(snd->urb, usb_dev,
+                                usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+                                NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+                else
+                        usb_fill_bulk_urb(snd->urb, usb_dev,
+                                usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+                                NULL, acm->writesize, acm_write_bulk, snd);
                 snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
                 snd->instance = acm;
         }
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0fe434505ac4..ba589d4ca8bc 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/bitops.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3703789d0d2a..b09a527f7341 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -751,7 +751,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
 {
         struct device *dev = &data->usb_dev->dev;
         char *buffer;
-        int rv;
+        int rv = 0;
 
         buffer = kmalloc(0x18, GFP_KERNEL);
         if (!buffer)
@@ -763,7 +763,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
                              0, 0, buffer, 0x18, USBTMC_TIMEOUT);
         if (rv < 0) {
                 dev_err(dev, "usb_control_msg returned %d\n", rv);
-                return rv;
+                goto err_out;
         }
 
         dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@ static int get_capabilities(struct usbtmc_device_data *data)
         dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
         if (buffer[0] != USBTMC_STATUS_SUCCESS) {
                 dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
-                return -EPERM;
+                rv = -EPERM;
+                goto err_out;
         }
 
         data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@ static int get_capabilities(struct usbtmc_device_data *data)
         data->capabilities.usb488_interface_capabilities = buffer[14];
         data->capabilities.usb488_device_capabilities = buffer[15];
 
+err_out:
         kfree(buffer);
-        return 0;
+        return rv;
 }
 
 #define capability_attribute(name)                                      \
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 69280c35b5cb..ad925946f869 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
         depends on USB
 
 config USB_DEVICEFS
-        bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+        bool "USB device filesystem (DEPRECATED)"
         depends on USB
         ---help---
           If you say Y here (and to "/proc file system support" in the "File
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33f90cb..a16c538d0132 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
         int max_tx;
         int i;
 
-        /* Allocate space for the SS endpoint companion descriptor */
-        ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
-                        GFP_KERNEL);
-        if (!ep->ss_ep_comp)
-                return -ENOMEM;
         desc = (struct usb_ss_ep_comp_descriptor *) buffer;
         if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
                 dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
                                 " interface %d altsetting %d ep %d: "
                                 "using minimum values\n",
                                 cfgno, inum, asnum, ep->desc.bEndpointAddress);
-                ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
-                ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
-                ep->ss_ep_comp->desc.bMaxBurst = 0;
-                /*
-                 * Leave bmAttributes as zero, which will mean no streams for
-                 * bulk, and isoc won't support multiple bursts of packets.
-                 * With bursts of only one packet, and a Mult of 1, the max
-                 * amount of data moved per endpoint service interval is one
-                 * packet.
-                 */
-                if (usb_endpoint_xfer_isoc(&ep->desc) ||
-                                usb_endpoint_xfer_int(&ep->desc))
-                        ep->ss_ep_comp->desc.wBytesPerInterval =
-                                ep->desc.wMaxPacketSize;
                 /*
                  * The next descriptor is for an Endpoint or Interface,
                  * no extra descriptors to copy into the companion structure,
                  * and we didn't eat up any of the buffer.
                  */
-                retval = 0;
-                goto valid;
+                return 0;
         }
         memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
         desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
                 buffer += i;
                 size -= i;
 
+                /* Allocate space for the SS endpoint companion descriptor */
+                endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+                                GFP_KERNEL);
+                if (!endpoint->ss_ep_comp)
+                        return -ENOMEM;
+
+                /* Fill in some default values (may be overwritten later) */
+                endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+                endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+                endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+                /*
+                 * Leave bmAttributes as zero, which will mean no streams for
+                 * bulk, and isoc won't support multiple bursts of packets.
+                 * With bursts of only one packet, and a Mult of 1, the max
+                 * amount of data moved per endpoint service interval is one
+                 * packet.
+                 */
+                if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+                                usb_endpoint_xfer_int(&endpoint->desc))
+                        endpoint->ss_ep_comp->desc.wBytesPerInterval =
+                                endpoint->desc.wMaxPacketSize;
+
                 if (size > 0) {
                         retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
                                         inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
                                 retval = buffer - buffer0;
                         }
                 } else {
+                        dev_warn(ddev, "config %d interface %d altsetting %d "
+                                "endpoint 0x%X has no "
+                                "SuperSpeed companion descriptor\n",
+                                cfgno, inum, asnum, d->bEndpointAddress);
                         retval = buffer - buffer0;
                 }
         } else {
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 73c108d117b4..96f11715cd26 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -136,17 +136,19 @@ static const struct class_info clas_info[] =
         {USB_CLASS_AUDIO,               "audio"},
         {USB_CLASS_COMM,                "comm."},
         {USB_CLASS_HID,                 "HID"},
-        {USB_CLASS_HUB,                 "hub"},
         {USB_CLASS_PHYSICAL,            "PID"},
+        {USB_CLASS_STILL_IMAGE,         "still"},
         {USB_CLASS_PRINTER,             "print"},
         {USB_CLASS_MASS_STORAGE,        "stor."},
+        {USB_CLASS_HUB,                 "hub"},
         {USB_CLASS_CDC_DATA,            "data"},
-        {USB_CLASS_APP_SPEC,            "app."},
-        {USB_CLASS_VENDOR_SPEC,         "vend."},
-        {USB_CLASS_STILL_IMAGE,         "still"},
         {USB_CLASS_CSCID,               "scard"},
         {USB_CLASS_CONTENT_SEC,         "c-sec"},
         {USB_CLASS_VIDEO,               "video"},
+        {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
+        {USB_CLASS_MISC,                "misc"},
+        {USB_CLASS_APP_SPEC,            "app."},
+        {USB_CLASS_VENDOR_SPEC,         "vend."},
         {-1,                            "unk."}         /* leave as last */
 };
 
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 308609039c73..38b8bce782d6 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -325,21 +325,34 @@ static void async_completed(struct urb *urb)
         struct async *as = urb->context;
         struct dev_state *ps = as->ps;
         struct siginfo sinfo;
+        struct pid *pid = NULL;
+        uid_t uid = 0;
+        uid_t euid = 0;
+        u32 secid = 0;
+        int signr;
 
         spin_lock(&ps->lock);
         list_move_tail(&as->asynclist, &ps->async_completed);
-        spin_unlock(&ps->lock);
         as->status = urb->status;
-        if (as->signr) {
+        signr = as->signr;
+        if (signr) {
                 sinfo.si_signo = as->signr;
                 sinfo.si_errno = as->status;
                 sinfo.si_code = SI_ASYNCIO;
                 sinfo.si_addr = as->userurb;
-                kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
-                                      as->euid, as->secid);
+                pid = as->pid;
+                uid = as->uid;
+                euid = as->euid;
+                secid = as->secid;
         }
         snoop(&urb->dev->dev, "urb complete\n");
         snoop_urb(urb, as->userurb);
+        spin_unlock(&ps->lock);
+
+        if (signr)
+                kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+                                      euid, secid);
+
         wake_up(&ps->wait);
 }
 
@@ -982,7 +995,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                                 USBDEVFS_URB_ZERO_PACKET |
                                 USBDEVFS_URB_NO_INTERRUPT))
                 return -EINVAL;
-        if (!uurb->buffer)
+        if (uurb->buffer_length > 0 && !uurb->buffer)
                 return -EINVAL;
         if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
             (uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                         is_in = 0;
                         uurb->endpoint &= ~USB_DIR_IN;
                 }
-                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-                                uurb->buffer, uurb->buffer_length)) {
-                        kfree(dr);
-                        return -EFAULT;
-                }
                 snoop(&ps->dev->dev, "control urb: bRequest=%02x "
                         "bRrequestType=%02x wValue=%04x "
                         "wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                 uurb->number_of_packets = 0;
                 if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
                         return -EINVAL;
-                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-                                uurb->buffer, uurb->buffer_length))
-                        return -EFAULT;
                 snoop(&ps->dev->dev, "bulk urb\n");
                 break;
 
@@ -1106,28 +1111,35 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
                         return -EINVAL;
                 if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
                         return -EINVAL;
-                if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
-                                uurb->buffer, uurb->buffer_length))
-                        return -EFAULT;
                 snoop(&ps->dev->dev, "interrupt urb\n");
                 break;
 
         default:
                 return -EINVAL;
         }
-        as = alloc_async(uurb->number_of_packets);
-        if (!as) {
+        if (uurb->buffer_length > 0 &&
+                        !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+                                uurb->buffer, uurb->buffer_length)) {
                 kfree(isopkt);
                 kfree(dr);
-                return -ENOMEM;
+                return -EFAULT;
         }
-        as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
-        if (!as->urb->transfer_buffer) {
+        as = alloc_async(uurb->number_of_packets);
+        if (!as) {
                 kfree(isopkt);
                 kfree(dr);
-                free_async(as);
                 return -ENOMEM;
         }
+        if (uurb->buffer_length > 0) {
+                as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+                                GFP_KERNEL);
+                if (!as->urb->transfer_buffer) {
+                        kfree(isopkt);
+                        kfree(dr);
+                        free_async(as);
+                        return -ENOMEM;
+                }
+        }
         as->urb->dev = ps->dev;
         as->urb->pipe = (uurb->type << 30) |
                         __create_pipe(ps->dev, uurb->endpoint & 0xf) |
@@ -1169,7 +1181,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
         kfree(isopkt);
         as->ps = ps;
         as->userurb = arg;
-        if (uurb->endpoint & USB_DIR_IN)
+        if (is_in && uurb->buffer_length > 0)
                 as->userbuffer = uurb->buffer;
         else
                 as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
         as->uid = cred->uid;
         as->euid = cred->euid;
         security_task_getsecid(current, &as->secid);
-        if (!is_in) {
+        if (!is_in && uurb->buffer_length > 0) {
                 if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
-                                as->urb->transfer_buffer_length)) {
+                                uurb->buffer_length)) {
                         free_async(as);
                         return -EFAULT;
                 }
@@ -1231,22 +1243,22 @@ static int processcompl(struct async *as, void __user * __user *arg)
         if (as->userbuffer)
                 if (copy_to_user(as->userbuffer, urb->transfer_buffer,
                                  urb->transfer_buffer_length))
-                        return -EFAULT;
+                        goto err_out;
         if (put_user(as->status, &userurb->status))
-                return -EFAULT;
+                goto err_out;
         if (put_user(urb->actual_length, &userurb->actual_length))
-                return -EFAULT;
+                goto err_out;
         if (put_user(urb->error_count, &userurb->error_count))
-                return -EFAULT;
+                goto err_out;
 
         if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
                 for (i = 0; i < urb->number_of_packets; i++) {
                         if (put_user(urb->iso_frame_desc[i].actual_length,
                                      &userurb->iso_frame_desc[i].actual_length))
-                                return -EFAULT;
+                                goto err_out;
                         if (put_user(urb->iso_frame_desc[i].status,
                                      &userurb->iso_frame_desc[i].status))
-                                return -EFAULT;
+                                goto err_out;
                 }
         }
 
@@ -1255,6 +1267,10 @@ static int processcompl(struct async *as, void __user * __user *arg)
         if (put_user(addr, (void __user * __user *)arg))
                 return -EFAULT;
         return 0;
+
+err_out:
+        free_async(as);
+        return -EFAULT;
 }
 
 static struct async *reap_as(struct dev_state *ps)
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index d397ecfd5b17..ec5c67ea07b7 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -227,6 +227,10 @@ struct hc_driver {
                 /* has a port been handed over to a companion? */
         int     (*port_handed_over)(struct usb_hcd *, int);
 
+                /* CLEAR_TT_BUFFER completion callback */
+        void    (*clear_tt_buffer_complete)(struct usb_hcd *,
+                                struct usb_host_endpoint *);
+
         /* xHCI specific functions */
                 /* Called by usb_alloc_dev to alloc HC device structures */
         int     (*alloc_dev)(struct usb_hcd *, struct usb_device *);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2af3b4f06054..71f86c60d83c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -450,10 +450,10 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
  * talking to TTs must queue control transfers (not just bulk and iso), so
  * both can talk to the same hub concurrently.
  */
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
 {
         struct usb_hub          *hub =
-                container_of(work, struct usb_hub, tt.kevent);
+                container_of(work, struct usb_hub, tt.clear_work);
         unsigned long           flags;
         int                     limit = 100;
 
@@ -462,6 +462,7 @@ static void hub_tt_kevent (struct work_struct *work)
                 struct list_head        *next;
                 struct usb_tt_clear     *clear;
                 struct usb_device       *hdev = hub->hdev;
+                const struct hc_driver  *drv;
                 int                     status;
 
                 next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@ static void hub_tt_kevent (struct work_struct *work)
                 /* drop lock so HCD can concurrently report other TT errors */
                 spin_unlock_irqrestore (&hub->tt.lock, flags);
                 status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
-                spin_lock_irqsave (&hub->tt.lock, flags);
-
                 if (status)
                         dev_err (&hdev->dev,
                                 "clear tt %d (%04x) error %d\n",
                                 clear->tt, clear->devinfo, status);
+
+                /* Tell the HCD, even if the operation failed */
+                drv = clear->hcd->driver;
+                if (drv->clear_tt_buffer_complete)
+                        (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
                 kfree(clear);
+                spin_lock_irqsave(&hub->tt.lock, flags);
         }
         spin_unlock_irqrestore (&hub->tt.lock, flags);
 }
 
 /**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
  *
  * High speed HCDs use this to tell the hub driver that some split control or
  * bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@ static void hub_tt_kevent (struct work_struct *work)
  * It may not be possible for that hub to handle additional full (or low)
  * speed transactions until that state is fully cleared out.
  */
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
 {
+        struct usb_device       *udev = urb->dev;
+        int                     pipe = urb->pipe;
         struct usb_tt           *tt = udev->tt;
         unsigned long           flags;
         struct usb_tt_clear     *clear;
@@ -508,7 +515,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
         if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
                 dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
                 /* FIXME recover somehow ... RESET_TT? */
-                return;
+                return -ENOMEM;
         }
 
         /* info that CLEAR_TT_BUFFER needs */
@@ -520,14 +527,19 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
                         : (USB_ENDPOINT_XFER_BULK << 11);
         if (usb_pipein (pipe))
                 clear->devinfo |= 1 << 15;
-        
+
+        /* info for completion callback */
+        clear->hcd = bus_to_hcd(udev->bus);
+        clear->ep = urb->ep;
+
         /* tell keventd to clear state for this TT */
         spin_lock_irqsave (&tt->lock, flags);
         list_add_tail (&clear->clear_list, &tt->clear_list);
-        schedule_work (&tt->kevent);
+        schedule_work(&tt->clear_work);
         spin_unlock_irqrestore (&tt->lock, flags);
+        return 0;
 }
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
 
 /* If do_delay is false, return the number of milliseconds the caller
  * needs to delay.
@@ -818,7 +830,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
         if (hub->has_indicators)
                 cancel_delayed_work_sync(&hub->leds);
         if (hub->tt.hub)
-                cancel_work_sync(&hub->tt.kevent);
+                cancel_work_sync(&hub->tt.clear_work);
 }
 
 /* caller has locked the hub device */
@@ -935,7 +947,7 @@ static int hub_configure(struct usb_hub *hub,
 
         spin_lock_init (&hub->tt.lock);
         INIT_LIST_HEAD (&hub->tt.clear_list);
-        INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+        INIT_WORK(&hub->tt.clear_work, hub_tt_work);
         switch (hdev->descriptor.bDeviceProtocol) {
                 case 0:
                         break;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 889c0f32a40b..de8081f065ed 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -188,16 +188,18 @@ struct usb_tt {
         /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
         spinlock_t              lock;
         struct list_head        clear_list;     /* of usb_tt_clear */
-        struct work_struct                      kevent;
+        struct work_struct      clear_work;
 };
 
 struct usb_tt_clear {
         struct list_head        clear_list;
         unsigned                tt;
         u16                     devinfo;
+        struct usb_hcd          *hcd;
+        struct usb_host_endpoint        *ep;
 };
 
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
 extern void usb_ep0_reinit(struct usb_device *);
 
 #endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2bed83caacb1..9720e699f472 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -806,6 +806,48 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
         return rc;
 }
 
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+        int err;
+
+        if (dev->have_langid)
+                return 0;
+
+        if (dev->string_langid < 0)
+                return -EPIPE;
+
+        err = usb_string_sub(dev, 0, 0, tbuf);
+
+        /* If the string was reported but is malformed, default to english
+         * (0x0409) */
+        if (err == -ENODATA || (err > 0 && err < 4)) {
+                dev->string_langid = 0x0409;
+                dev->have_langid = 1;
+                dev_err(&dev->dev,
+                        "string descriptor 0 malformed (err = %d), "
+                        "defaulting to 0x%04x\n",
+                                err, dev->string_langid);
+                return 0;
+        }
+
+        /* In case of all other errors, we assume the device is not able to
+         * deal with strings at all. Set string_langid to -1 in order to
+         * prevent any string to be retrieved from the device */
+        if (err < 0) {
+                dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+                                        err);
+                dev->string_langid = -1;
+                return -EPIPE;
+        }
+
+        /* always use the first langid listed */
+        dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+        dev->have_langid = 1;
+        dev_dbg(&dev->dev, "default language 0x%04x\n",
+                                dev->string_langid);
+        return 0;
+}
+
 /**
  * usb_string - returns UTF-8 version of a string descriptor
  * @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
         if (!tbuf)
                 return -ENOMEM;
 
-        /* get langid for strings if it's not yet known */
-        if (!dev->have_langid) {
-                err = usb_string_sub(dev, 0, 0, tbuf);
-                if (err < 0) {
-                        dev_err(&dev->dev,
-                                "string descriptor 0 read error: %d\n",
-                                err);
-                } else if (err < 4) {
-                        dev_err(&dev->dev, "string descriptor 0 too short\n");
-                } else {
-                        dev->string_langid = tbuf[2] | (tbuf[3] << 8);
-                        /* always use the first langid listed */
-                        dev_dbg(&dev->dev, "default language 0x%04x\n",
-                                dev->string_langid);
-                }
-
-                dev->have_langid = 1;
-        }
+        err = usb_get_langid(dev, tbuf);
+        if (err < 0)
+                goto errout;
 
         err = usb_string_sub(dev, dev->string_langid, index, tbuf);
         if (err < 0)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5d1ddf485d1e..7f8e83a954ac 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -286,6 +286,27 @@ config USB_S3C_HSOTG
         default USB_GADGET
         select USB_GADGET_SELECTED
 
+config USB_GADGET_IMX
+        boolean "Freescale IMX USB Peripheral Controller"
+        depends on ARCH_MX1
+        help
+           Freescale's IMX series include an integrated full speed
+           USB 1.1 device controller.  The controller in the IMX series
+           is register-compatible.
+
+           It has Six fixed-function endpoints, as well as endpoint
+           zero (for control transfers).
+
+           Say "y" to link the driver statically, or "m" to build a
+           dynamically linked module called "imx_udc" and force all
+           gadget drivers to also be dynamically linked.
+
+config USB_IMX
+        tristate
+        depends on USB_GADGET_IMX
+        default USB_GADGET
+        select USB_GADGET_SELECTED
+
 config USB_GADGET_S3C2410
         boolean "S3C2410 USB Device Controller"
         depends on ARCH_S3C2410
@@ -321,27 +342,6 @@ config USB_GADGET_MUSB_HDRC
           This OTG-capable silicon IP is used in dual designs including
           the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
 
-config USB_GADGET_IMX
-        boolean "Freescale IMX USB Peripheral Controller"
-        depends on ARCH_MX1
-        help
-           Freescale's IMX series include an integrated full speed
-           USB 1.1 device controller.  The controller in the IMX series
-           is register-compatible.
-
-           It has Six fixed-function endpoints, as well as endpoint
-           zero (for control transfers).
-
-           Say "y" to link the driver statically, or "m" to build a
-           dynamically linked module called "imx_udc" and force all
-           gadget drivers to also be dynamically linked.
-
-config USB_IMX
-        tristate
-        depends on USB_GADGET_IMX
-        default USB_GADGET
-        select USB_GADGET_SELECTED
-
 config USB_GADGET_M66592
         boolean "Renesas M66592 USB Peripheral Controller"
         select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@ config USB_ZERO_HNPTEST
 config USB_AUDIO
         tristate "Audio Gadget (EXPERIMENTAL)"
         depends on SND
+        select SND_PCM
         help
           Gadget Audio is compatible with USB Audio Class specification 1.0.
           It will include at least one AudioControl interface, zero or more
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 826f3adde5d8..77352ccc245e 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -48,7 +48,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 94de7e864614..9f80f4e970bd 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -42,9 +42,9 @@
  * Instead:  allocate your own, using normal USB-IF procedures.
  */
 
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM                0x0525  /* NetChip */
-#define AUDIO_PRODUCT_NUM               0xa4a1  /* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM                0x1d6b  /* Linux Foundation */
+#define AUDIO_PRODUCT_NUM               0x0101  /* Linux-USB Audio Gadget */
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d006dc652e02..bd102f5052ba 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,15 +293,16 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
                 /* CDC Subset */
                 eth_config_driver.label = "CDC Subset/SAFE";
 
-                device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
-                device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
-                device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+                device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+                device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+                if (!has_rndis())
+                        device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
         }
 
         if (has_rndis()) {
                 /* RNDIS plus ECM-or-Subset */
-                device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
-                device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+                device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+                device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
                 device_desc.bNumConfigurations = 2;
         }
 
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6829d5961359..a3913519fd58 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -34,7 +34,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e2819847..ed21e263f832 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@ static int is_vbus_present(void)
 {
         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
 
-        if (mach->gpio_vbus) {
+        if (gpio_is_valid(mach->gpio_vbus)) {
                 int value = gpio_get_value(mach->gpio_vbus);
 
                 if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@ static void pullup_off(void)
         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
         int off_level = mach->gpio_pullup_inverted;
 
-        if (mach->gpio_pullup)
+        if (gpio_is_valid(mach->gpio_pullup))
                 gpio_set_value(mach->gpio_pullup, off_level);
         else if (mach->udc_command)
                 mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@ static void pullup_on(void)
         struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
         int on_level = !mach->gpio_pullup_inverted;
 
-        if (mach->gpio_pullup)
+        if (gpio_is_valid(mach->gpio_pullup))
                 gpio_set_value(mach->gpio_pullup, on_level);
         else if (mach->udc_command)
                 mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
         udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
         /* not all boards support pullup control */
-        if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+        if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
                 return -EOPNOTSUPP;
 
         udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@ pxa25x_udc_irq(int irq, void *_dev)
                                         USIR0 |= tmp;
                                         handled = 1;
                                 }
+#ifndef CONFIG_USB_PXA25X_SMALL
                                 if (usir1 & tmp) {
                                         handle_ep(&dev->ep[i+8]);
                                         USIR1 |= tmp;
                                         handled = 1;
                                 }
+#endif
                         }
                 }
 
@@ -2160,7 +2162,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
         dev->dev = &pdev->dev;
         dev->mach = pdev->dev.platform_data;
 
-        if (dev->mach->gpio_vbus) {
+        if (gpio_is_valid(dev->mach->gpio_vbus)) {
                 if ((retval = gpio_request(dev->mach->gpio_vbus,
                                 "pxa25x_udc GPIO VBUS"))) {
                         dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
         } else
                 vbus_irq = 0;
 
-        if (dev->mach->gpio_pullup) {
+        if (gpio_is_valid(dev->mach->gpio_pullup)) {
                 if ((retval = gpio_request(dev->mach->gpio_pullup,
                                 "pca25x_udc GPIO PULLUP"))) {
                         dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@ lubbock_fail0:
 #endif
         free_irq(irq, dev);
  err_irq1:
-        if (dev->mach->gpio_pullup)
+        if (gpio_is_valid(dev->mach->gpio_pullup))
                 gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
-        if (dev->mach->gpio_vbus)
+        if (gpio_is_valid(dev->mach->gpio_vbus))
                 gpio_free(dev->mach->gpio_vbus);
  err_gpio_vbus:
         clk_put(dev->clk);
@@ -2294,11 +2296,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
                 free_irq(LUBBOCK_USB_IRQ, dev);
         }
 #endif
-        if (dev->mach->gpio_vbus) {
+        if (gpio_is_valid(dev->mach->gpio_vbus)) {
                 free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
                 gpio_free(dev->mach->gpio_vbus);
         }
-        if (dev->mach->gpio_pullup)
+        if (gpio_is_valid(dev->mach->gpio_pullup))
                 gpio_free(dev->mach->gpio_pullup);
 
         clk_put(dev->clk);
@@ -2329,7 +2331,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
         struct pxa25x_udc       *udc = platform_get_drvdata(dev);
         unsigned long flags;
 
-        if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+        if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
                 WARNING("USB host won't detect disconnect!\n");
         udc->suspended = 1;
 
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 2b4660e08c4d..ca41b0b5afb3 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -442,6 +442,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
 
         case OID_802_3_MAC_OPTIONS:
                 pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+                *outbuf = cpu_to_le32(0);
+                retval = 0;
                 break;
 
         /* ieee802.3 statistics OIDs (table 4-4) */
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 9a2b8920532d..a9b452fe6221 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -28,7 +28,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0c03471f0d41..1a920c70b5a1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -181,26 +181,27 @@ config USB_OHCI_HCD_PPC_SOC
           Enables support for the USB controller on the MPC52xx or
           STB03xxx processor chip.  If unsure, say Y.
 
-config USB_OHCI_HCD_PPC_OF
-        bool "OHCI support for PPC USB controller on OF platform bus"
-        depends on USB_OHCI_HCD && PPC_OF
-        default y
-        ---help---
-          Enables support for the USB controller PowerPC present on the
-          OpenFirmware platform bus.
-
 config USB_OHCI_HCD_PPC_OF_BE
-        bool "Support big endian HC"
-        depends on USB_OHCI_HCD_PPC_OF
-        default y
+        bool "OHCI support for OF platform bus (big endian)"
+        depends on USB_OHCI_HCD && PPC_OF
         select USB_OHCI_BIG_ENDIAN_DESC
         select USB_OHCI_BIG_ENDIAN_MMIO
+        ---help---
+          Enables support for big-endian USB controllers present on the
+          OpenFirmware platform bus.
 
 config USB_OHCI_HCD_PPC_OF_LE
-        bool "Support little endian HC"
-        depends on USB_OHCI_HCD_PPC_OF
-        default n
+        bool "OHCI support for OF platform bus (little endian)"
+        depends on USB_OHCI_HCD && PPC_OF
         select USB_OHCI_LITTLE_ENDIAN
+        ---help---
+          Enables support for little-endian USB controllers present on the
+          OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+        bool
+        depends on USB_OHCI_HCD && PPC_OF
+        default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
 
 config USB_OHCI_HCD_PCI
         bool "OHCI support for PCI-bus USB controllers"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index c3a778bd359c..59d208d94d4e 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -113,6 +113,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
         .bus_resume             = ehci_bus_resume,
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf86809c5120..991174937db3 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -325,6 +325,8 @@ static const struct hc_driver ehci_fsl_hc_driver = {
         .bus_resume = ehci_bus_resume,
         .relinquish_port = ehci_relinquish_port,
         .port_handed_over = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2b72473544d3..7d03549c3339 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1003,6 +1003,8 @@ idle_timeout:
                 schedule_timeout_uninterruptible(1);
                 goto rescan;
         case QH_STATE_IDLE:             /* fully unlinked */
+                if (qh->clearing_tt)
+                        goto idle_timeout;
                 if (list_empty (&qh->qtd_list)) {
                         qh_put (qh);
                         break;
@@ -1030,12 +1032,14 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
         struct ehci_qh          *qh;
         int                     eptype = usb_endpoint_type(&ep->desc);
+        int                     epnum = usb_endpoint_num(&ep->desc);
+        int                     is_out = usb_endpoint_dir_out(&ep->desc);
+        unsigned long           flags;
 
         if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
                 return;
 
- rescan:
-        spin_lock_irq(&ehci->lock);
+        spin_lock_irqsave(&ehci->lock, flags);
         qh = ep->hcpriv;
 
         /* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,29 +1048,24 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
          * the toggle bit in the QH.
          */
         if (qh) {
+                usb_settoggle(qh->dev, epnum, is_out, 0);
                 if (!list_empty(&qh->qtd_list)) {
                         WARN_ONCE(1, "clear_halt for a busy endpoint\n");
-                } else if (qh->qh_state == QH_STATE_IDLE) {
-                        qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
-                } else {
-                        /* It's not safe to write into the overlay area
-                         * while the QH is active.  Unlink it first and
-                         * wait for the unlink to complete.
+                } else if (qh->qh_state == QH_STATE_LINKED) {
+
+                        /* The toggle value in the QH can't be updated
+                         * while the QH is active.  Unlink it now;
+                         * re-linking will call qh_refresh().
                          */
-                        if (qh->qh_state == QH_STATE_LINKED) {
-                                if (eptype == USB_ENDPOINT_XFER_BULK) {
-                                        unlink_async(ehci, qh);
-                                } else {
-                                        intr_deschedule(ehci, qh);
-                                        (void) qh_schedule(ehci, qh);
-                                }
+                        if (eptype == USB_ENDPOINT_XFER_BULK) {
+                                unlink_async(ehci, qh);
+                        } else {
+                                intr_deschedule(ehci, qh);
+                                (void) qh_schedule(ehci, qh);
                         }
-                        spin_unlock_irq(&ehci->lock);
-                        schedule_timeout_uninterruptible(1);
-                        goto rescan;
                 }
         }
-        spin_unlock_irq(&ehci->lock);
+        spin_unlock_irqrestore(&ehci->lock, flags);
 }
 
 static int ehci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index a44bb4a94954..89b7c70c6ed6 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -61,6 +61,8 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
 #endif
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 770dd9aba62a..1d283e1b2b8d 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,6 +105,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
         struct ehci_hcd *ehci = hcd_to_ehci(hcd);
         int retval;
 
+        ehci_reset(ehci);
         retval = ehci_halt(ehci);
         if (retval)
                 return retval;
@@ -118,7 +119,6 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 
         hcd->has_tt = 1;
 
-        ehci_reset(ehci);
         ehci_port_power(ehci, 0);
 
         return retval;
@@ -165,6 +165,8 @@ static const struct hc_driver ehci_orion_hc_driver = {
         .bus_resume = ehci_bus_resume,
         .relinquish_port = ehci_relinquish_port,
         .port_handed_over = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static void __init
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f3683e1da161..c2f1b7df918c 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -404,6 +404,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
         .bus_resume =           ehci_bus_resume,
         .relinquish_port =      ehci_relinquish_port,
         .port_handed_over =     ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fbd272288fc2..36f96da129f5 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -79,6 +79,8 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
 #endif
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 93f7035d00a1..1dee33b9139e 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -75,6 +75,8 @@ static const struct hc_driver ps3_ehci_hc_driver = {
 #endif
         .relinquish_port        = ehci_relinquish_port,
         .port_handed_over       = ehci_port_handed_over,
+
+        .clear_tt_buffer_complete       = ehci_clear_tt_buffer_complete,
 };
 
 static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3192f683f807..9a1384747f3b 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,6 +93,22 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
         qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
         qh->hw_alt_next = EHCI_LIST_END(ehci);
 
+        /* Except for control endpoints, we make hardware maintain data
+         * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+         * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+         * ever clear it.
+         */
+        if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+                unsigned        is_out, epnum;
+
+                is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+                epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+                if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+                        qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+                        usb_settoggle (qh->dev, epnum, is_out, 1);
+                }
+        }
+
         /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
         wmb ();
         qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 /*-------------------------------------------------------------------------*/
 
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+                struct usb_host_endpoint *ep)
+{
+        struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
+        struct ehci_qh          *qh = ep->hcpriv;
+        unsigned long           flags;
+
+        spin_lock_irqsave(&ehci->lock, flags);
+        qh->clearing_tt = 0;
+        if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+                        && HC_IS_RUNNING(hcd->state))
+                qh_link_async(ehci, qh);
+        spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+                struct urb *urb, u32 token)
+{
+
+        /* If an async split transaction gets an error or is unlinked,
+         * the TT buffer may be left in an indeterminate state.  We
+         * have to clear the TT buffer.
+         *
+         * Note: this routine is never called for Isochronous transfers.
+         */
+        if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+                struct usb_device *tt = urb->dev->tt->hub;
+                dev_dbg(&tt->dev,
+                        "clear tt buffer port %d, a%d ep%d t%08x\n",
+                        urb->dev->ttport, urb->dev->devnum,
+                        usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+                if (!ehci_is_TDI(ehci)
+                                || urb->dev->tt->hub !=
+                                   ehci_to_hcd(ehci)->self.root_hub) {
+                        if (usb_hub_clear_tt_buffer(urb) == 0)
+                                qh->clearing_tt = 1;
+                } else {
+
+                        /* REVISIT ARC-derived cores don't clear the root
+                         * hub TT buffer in this way...
+                         */
+                }
+        }
+}
+
 static int qtd_copy_status (
         struct ehci_hcd *ehci,
         struct urb *urb,
@@ -149,6 +214,14 @@ static int qtd_copy_status (
                 if (token & QTD_STS_BABBLE) {
                         /* FIXME "must" disable babbling device's port too */
                         status = -EOVERFLOW;
+                /* CERR nonzero + halt --> stall */
+                } else if (QTD_CERR(token)) {
+                        status = -EPIPE;
+
+                /* In theory, more than one of the following bits can be set
+                 * since they are sticky and the transaction is retried.
+                 * Which to test first is rather arbitrary.
+                 */
                 } else if (token & QTD_STS_MMF) {
                         /* fs/ls interrupt xfer missed the complete-split */
                         status = -EPROTO;
@@ -157,21 +230,15 @@ static int qtd_copy_status (
                                 ? -ENOSR  /* hc couldn't read data */
                                 : -ECOMM; /* hc couldn't write data */
                 } else if (token & QTD_STS_XACT) {
-                        /* timeout, bad crc, wrong PID, etc; retried */
-                        if (QTD_CERR (token))
-                                status = -EPIPE;
-                        else {
-                                ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
-                                        urb->dev->devpath,
-                                        usb_pipeendpoint (urb->pipe),
-                                        usb_pipein (urb->pipe) ? "in" : "out");
-                                status = -EPROTO;
-                        }
-                /* CERR nonzero + no errors + halt --> stall */
-                } else if (QTD_CERR (token))
-                        status = -EPIPE;
-                else    /* unknown */
+                        /* timeout, bad CRC, wrong PID, etc */
+                        ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+                                urb->dev->devpath,
+                                usb_pipeendpoint(urb->pipe),
+                                usb_pipein(urb->pipe) ? "in" : "out");
+                        status = -EPROTO;
+                } else {        /* unknown */
                         status = -EPROTO;
+                }
 
                 ehci_vdbg (ehci,
                         "dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@ static int qtd_copy_status (
                         usb_pipeendpoint (urb->pipe),
                         usb_pipein (urb->pipe) ? "in" : "out",
                         token, status);
-
-                /* if async CSPLIT failed, try cleaning out the TT buffer */
-                if (status != -EPIPE
-                                && urb->dev->tt
-                                && !usb_pipeint(urb->pipe)
-                                && ((token & QTD_STS_MMF) != 0
-                                        || QTD_CERR(token) == 0)
-                                && (!ehci_is_TDI(ehci)
-                                        || urb->dev->tt->hub !=
-                                           ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
-                        struct usb_device *tt = urb->dev->tt->hub;
-                        dev_dbg (&tt->dev,
-                                "clear tt buffer port %d, a%d ep%d t%08x\n",
-                                urb->dev->ttport, urb->dev->devnum,
-                                usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
-                        /* REVISIT ARC-derived cores don't clear the root
-                         * hub TT buffer in this way...
-                         */
-                        usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
-                }
         }
 
         return status;
@@ -391,9 +436,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
                         /* qh unlinked; token in overlay may be most current */
                         if (state == QH_STATE_IDLE
                                         && cpu_to_hc32(ehci, qtd->qtd_dma)
-                                                == qh->hw_current)
+                                                == qh->hw_current) {
                                 token = hc32_to_cpu(ehci, qh->hw_token);
 
+                                /* An unlink may leave an incomplete
+                                 * async transaction in the TT buffer.
+                                 * We have to clear it.
+                                 */
+                                ehci_clear_tt_buffer(ehci, qh, urb, token);
+                        }
+
                         /* force halt for unlinked or blocked qh, so we'll
                          * patch the qh later and so that completions can't
                          * activate it while we "know" it's stopped.
@@ -419,6 +471,13 @@ halt:
                                         && (qtd->hw_alt_next
                                                 & EHCI_LIST_END(ehci)))
                                 last_status = -EINPROGRESS;
+
+                        /* As part of low/full-speed endpoint-halt processing
+                         * we must clear the TT buffer (11.17.5).
+                         */
+                        if (unlikely(last_status != -EINPROGRESS &&
+                                        last_status != -EREMOTEIO))
+                                ehci_clear_tt_buffer(ehci, qh, urb, token);
                 }
 
                 /* if we're removing something not at the queue head,
@@ -834,6 +893,7 @@ done:
         qh->qh_state = QH_STATE_IDLE;
         qh->hw_info1 = cpu_to_hc32(ehci, info1);
         qh->hw_info2 = cpu_to_hc32(ehci, info2);
+        usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
         qh_refresh (ehci, qh);
         return qh;
 }
@@ -847,6 +907,10 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
         __hc32          dma = QH_NEXT(ehci, qh->qh_dma);
         struct ehci_qh  *head;
 
+        /* Don't link a QH if there's a Clear-TT-Buffer pending */
+        if (unlikely(qh->clearing_tt))
+                return;
+
         /* (re)start the async schedule? */
         head = ehci->async;
         timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +928,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
                 }
         }
 
-        /* clear halt and maybe recover from silicon quirk */
+        /* clear halt and/or toggle; and maybe recover from silicon quirk */
         if (qh->qh_state == QH_STATE_IDLE)
                 qh_refresh (ehci, qh);
 
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9d1babc7ff65..74f7f83b29ad 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1619,11 +1619,14 @@ itd_complete (
                                 desc->status = -EPROTO;
 
                         /* HC need not update length with this error */
-                        if (!(t & EHCI_ISOC_BABBLE))
-                                desc->actual_length = EHCI_ITD_LENGTH (t);
+                        if (!(t & EHCI_ISOC_BABBLE)) {
+                                desc->actual_length = EHCI_ITD_LENGTH(t);
+                                urb->actual_length += desc->actual_length;
+                        }
                 } else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
                         desc->status = 0;
-                        desc->actual_length = EHCI_ITD_LENGTH (t);
+                        desc->actual_length = EHCI_ITD_LENGTH(t);
+                        urb->actual_length += desc->actual_length;
                 } else {
                         /* URB was too late */
                         desc->status = -EXDEV;
@@ -2014,7 +2017,8 @@ sitd_complete (
                         desc->status = -EPROTO;
         } else {
                 desc->status = 0;
-                desc->actual_length = desc->length - SITD_LENGTH (t);
+                desc->actual_length = desc->length - SITD_LENGTH(t);
+                urb->actual_length += desc->actual_length;
         }
         stream->depth -= stream->interval << 3;
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 90ad3395bb21..2bfff30f4704 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -354,7 +354,9 @@ struct ehci_qh {
         unsigned short          period;         /* polling interval */
         unsigned short          start;          /* where polling starts */
 #define NO_FRAME ((unsigned short)~0)                   /* pick new start */
+
         struct usb_device       *dev;           /* access to TT */
+        unsigned                clearing_tt:1;  /* Clear-TT-Buf in progress */
 } __attribute__ ((aligned (32)));
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index bb63b68ddb77..62a226b61670 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -576,9 +576,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
                         out_be16(&usb->fhci->regs->usb_event,
                                  usb->saved_msk);
                 } else if (usb->port_status == FHCI_PORT_DISABLED) {
-                        if (fhci_ioports_check_bus_state(fhci) == 1 &&
-                                        usb->port_status != FHCI_PORT_LOW &&
-                                        usb->port_status != FHCI_PORT_FULL)
+                        if (fhci_ioports_check_bus_state(fhci) == 1)
                                 fhci_device_connected_interrupt(fhci);
                 }
                 usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
         }
 
         if (usb_er & USB_E_IDLE_MASK) {
-                if (usb->port_status == FHCI_PORT_DISABLED &&
-                                usb->port_status != FHCI_PORT_LOW &&
-                                usb->port_status != FHCI_PORT_FULL) {
+                if (usb->port_status == FHCI_PORT_DISABLED) {
                         usb_er &= ~USB_E_RESET_MASK;
                         fhci_device_connected_interrupt(fhci);
                 } else if (usb->port_status ==
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 3fa3a1702796..d4feebfc63bd 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -361,7 +361,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
 
 static struct platform_driver isp1760_plat_driver = {
         .probe  = isp1760_plat_probe,
-        .remove = isp1760_plat_remove,
+        .remove = __devexit_p(isp1760_plat_remove),
         .driver = {
                 .name   = "isp1760",
         },
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f3aaba35e912..83cbecd2a1ed 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -282,6 +282,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 static void ohci_omap_stop(struct usb_hcd *hcd)
 {
         dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+        ohci_stop(hcd);
         omap_ohci_clock_power(0);
 }
 
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 56976cc0352a..e18f74946e68 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2501c571f855..705e34324156 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -173,6 +173,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
 {
         void *addr;
         u32 temp;
+        u64 temp_64;
 
         addr = &ir_set->irq_pending;
         temp = xhci_readl(xhci, addr);
@@ -200,25 +201,15 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
                 xhci_dbg(xhci, "  WARN: %p: ir_set.rsvd = 0x%x\n",
                                 addr, (unsigned int)temp);
 
-        addr = &ir_set->erst_base[0];
-        temp = xhci_readl(xhci, addr);
-        xhci_dbg(xhci, "  %p: ir_set.erst_base[0] = 0x%x\n",
-                        addr, (unsigned int) temp);
-
-        addr = &ir_set->erst_base[1];
-        temp = xhci_readl(xhci, addr);
-        xhci_dbg(xhci, "  %p: ir_set.erst_base[1] = 0x%x\n",
-                        addr, (unsigned int) temp);
+        addr = &ir_set->erst_base;
+        temp_64 = xhci_read_64(xhci, addr);
+        xhci_dbg(xhci, "  %p: ir_set.erst_base = @%08llx\n",
+                        addr, temp_64);
 
-        addr = &ir_set->erst_dequeue[0];
-        temp = xhci_readl(xhci, addr);
-        xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[0] = 0x%x\n",
-                        addr, (unsigned int) temp);
-
-        addr = &ir_set->erst_dequeue[1];
-        temp = xhci_readl(xhci, addr);
-        xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[1] = 0x%x\n",
-                        addr, (unsigned int) temp);
+        addr = &ir_set->erst_dequeue;
+        temp_64 = xhci_read_64(xhci, addr);
+        xhci_dbg(xhci, "  %p: ir_set.erst_dequeue = @%08llx\n",
+                        addr, temp_64);
 }
 
 void xhci_print_run_regs(struct xhci_hcd *xhci)
@@ -268,8 +259,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
                 xhci_dbg(xhci, "Link TRB:\n");
                 xhci_print_trb_offsets(xhci, trb);
 
-                address = trb->link.segment_ptr[0] +
-                        (((u64) trb->link.segment_ptr[1]) << 32);
+                address = trb->link.segment_ptr;
                 xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
 
                 xhci_dbg(xhci, "Interrupter target = 0x%x\n",
@@ -282,8 +272,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
                                 (unsigned int) (trb->link.control & TRB_NO_SNOOP));
                 break;
         case TRB_TYPE(TRB_TRANSFER):
-                address = trb->trans_event.buffer[0] +
-                        (((u64) trb->trans_event.buffer[1]) << 32);
+                address = trb->trans_event.buffer;
                 /*
                  * FIXME: look at flags to figure out if it's an address or if
                  * the data is directly in the buffer field.
@@ -291,8 +280,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
                 xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
                 break;
         case TRB_TYPE(TRB_COMPLETION):
-                address = trb->event_cmd.cmd_trb[0] +
-                        (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+                address = trb->event_cmd.cmd_trb;
                 xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
                 xhci_dbg(xhci, "Completion status = %u\n",
                                 (unsigned int) GET_COMP_CODE(trb->event_cmd.status));
@@ -328,8 +316,8 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
         for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
                 trb = &seg->trbs[i];
                 xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
-                                (unsigned int) trb->link.segment_ptr[0],
-                                (unsigned int) trb->link.segment_ptr[1],
+                                lower_32_bits(trb->link.segment_ptr),
+                                upper_32_bits(trb->link.segment_ptr),
                                 (unsigned int) trb->link.intr_target,
                                 (unsigned int) trb->link.control);
                 addr += sizeof(*trb);
@@ -386,8 +374,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
                 entry = &erst->entries[i];
                 xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
                                 (unsigned int) addr,
-                                (unsigned int) entry->seg_addr[0],
-                                (unsigned int) entry->seg_addr[1],
+                                lower_32_bits(entry->seg_addr),
+                                upper_32_bits(entry->seg_addr),
                                 (unsigned int) entry->seg_size,
                                 (unsigned int) entry->rsvd);
                 addr += sizeof(*entry);
@@ -396,90 +384,147 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
 {
-        u32 val;
+        u64 val;
 
-        val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-        xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
-        val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
-        xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+        val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+        xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+                        lower_32_bits(val));
+        xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+                        upper_32_bits(val));
 }
 
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+        int i;
+        for (i = 0; i < 4; ++i) {
+                xhci_dbg(xhci, "@%p (virt) @%08llx "
+                         "(dma) %#08llx - rsvd64[%d]\n",
+                         &ctx[4 + i], (unsigned long long)dma,
+                         ctx[4 + i], i);
+                dma += 8;
+        }
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
-        int i, j;
-        int last_ep_ctx = 31;
         /* Fields are 32 bits wide, DMA addresses are in bytes */
         int field_size = 32 / 8;
+        int i;
 
-        xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
-                        &ctx->drop_flags, (unsigned long long)dma,
-                        ctx->drop_flags);
-        dma += field_size;
-        xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
-                        &ctx->add_flags, (unsigned long long)dma,
-                        ctx->add_flags);
-        dma += field_size;
-        for (i = 0; i > 6; ++i) {
-                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-                                &ctx->rsvd[i], (unsigned long long)dma,
-                                ctx->rsvd[i], i);
-                dma += field_size;
-        }
+        struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+        dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+        int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
         xhci_dbg(xhci, "Slot Context:\n");
         xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
-                        &ctx->slot.dev_info,
-                        (unsigned long long)dma, ctx->slot.dev_info);
+                        &slot_ctx->dev_info,
+                        (unsigned long long)dma, slot_ctx->dev_info);
         dma += field_size;
         xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
-                        &ctx->slot.dev_info2,
-                        (unsigned long long)dma, ctx->slot.dev_info2);
+                        &slot_ctx->dev_info2,
+                        (unsigned long long)dma, slot_ctx->dev_info2);
         dma += field_size;
         xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
-                        &ctx->slot.tt_info,
-                        (unsigned long long)dma, ctx->slot.tt_info);
+                        &slot_ctx->tt_info,
+                        (unsigned long long)dma, slot_ctx->tt_info);
         dma += field_size;
         xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
-                        &ctx->slot.dev_state,
-                        (unsigned long long)dma, ctx->slot.dev_state);
+                        &slot_ctx->dev_state,
+                        (unsigned long long)dma, slot_ctx->dev_state);
         dma += field_size;
-        for (i = 0; i > 4; ++i) {
+        for (i = 0; i < 4; ++i) {
                 xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-                                &ctx->slot.reserved[i], (unsigned long long)dma,
-                                ctx->slot.reserved[i], i);
+                                &slot_ctx->reserved[i], (unsigned long long)dma,
+                                slot_ctx->reserved[i], i);
                 dma += field_size;
         }
 
+        if (csz)
+                dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+                     struct xhci_container_ctx *ctx,
+                     unsigned int last_ep)
+{
+        int i, j;
+        int last_ep_ctx = 31;
+        /* Fields are 32 bits wide, DMA addresses are in bytes */
+        int field_size = 32 / 8;
+        int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
         if (last_ep < 31)
                 last_ep_ctx = last_ep + 1;
         for (i = 0; i < last_ep_ctx; ++i) {
+                struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+                dma_addr_t dma = ctx->dma +
+                        ((unsigned long)ep_ctx - (unsigned long)ctx);
+
                 xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
                 xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
-                                &ctx->ep[i].ep_info,
-                                (unsigned long long)dma, ctx->ep[i].ep_info);
+                                &ep_ctx->ep_info,
+                                (unsigned long long)dma, ep_ctx->ep_info);
                 dma += field_size;
                 xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
-                                &ctx->ep[i].ep_info2,
-                                (unsigned long long)dma, ctx->ep[i].ep_info2);
-                dma += field_size;
-                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
-                                &ctx->ep[i].deq[0],
-                                (unsigned long long)dma, ctx->ep[i].deq[0]);
-                dma += field_size;
-                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
-                                &ctx->ep[i].deq[1],
-                                (unsigned long long)dma, ctx->ep[i].deq[1]);
+                                &ep_ctx->ep_info2,
+                                (unsigned long long)dma, ep_ctx->ep_info2);
                 dma += field_size;
+                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+                                &ep_ctx->deq,
+                                (unsigned long long)dma, ep_ctx->deq);
+                dma += 2*field_size;
                 xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
-                                &ctx->ep[i].tx_info,
-                                (unsigned long long)dma, ctx->ep[i].tx_info);
+                                &ep_ctx->tx_info,
+                                (unsigned long long)dma, ep_ctx->tx_info);
                 dma += field_size;
                 for (j = 0; j < 3; ++j) {
                         xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-                                        &ctx->ep[i].reserved[j],
+                                        &ep_ctx->reserved[j],
                                         (unsigned long long)dma,
-                                        ctx->ep[i].reserved[j], j);
+                                        ep_ctx->reserved[j], j);
+                        dma += field_size;
+                }
+
+                if (csz)
+                        dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
+        }
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+                  struct xhci_container_ctx *ctx,
+                  unsigned int last_ep)
+{
+        int i;
+        /* Fields are 32 bits wide, DMA addresses are in bytes */
+        int field_size = 32 / 8;
+        struct xhci_slot_ctx *slot_ctx;
+        dma_addr_t dma = ctx->dma;
+        int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+        if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+                struct xhci_input_control_ctx *ctrl_ctx =
+                        xhci_get_input_control_ctx(xhci, ctx);
+                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+                         &ctrl_ctx->drop_flags, (unsigned long long)dma,
+                         ctrl_ctx->drop_flags);
+                dma += field_size;
+                xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+                         &ctrl_ctx->add_flags, (unsigned long long)dma,
+                         ctrl_ctx->add_flags);
+                dma += field_size;
+                for (i = 0; i < 6; ++i) {
+                        xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+                                 &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+                                 ctrl_ctx->rsvd2[i], i);
                         dma += field_size;
                 }
+
+                if (csz)
+                        dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
         }
+
+        slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+        xhci_dbg_slot_ctx(xhci, ctx);
+        xhci_dbg_ep_ctx(xhci, ctx, last_ep);
 }
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07ccd09..816c39caca1c 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci)
         u32 state;
 
         state = xhci_readl(xhci, &xhci->op_regs->status);
-        BUG_ON((state & STS_HALT) == 0);
+        if ((state & STS_HALT) == 0) {
+                xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+                return 0;
+        }
 
         xhci_dbg(xhci, "// Reset the HC\n");
         command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@ int xhci_init(struct usb_hcd *hcd)
 static void xhci_work(struct xhci_hcd *xhci)
 {
         u32 temp;
+        u64 temp_64;
 
         /*
          * Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@ static void xhci_work(struct xhci_hcd *xhci)
         /* FIXME this should be a delayed service routine that clears the EHB */
         xhci_handle_event(xhci);
 
-        /* Clear the event handler busy flag; the event ring should be empty. */
-        temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-        xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+        /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+        temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+        xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
         /* Flush posted writes -- FIXME is this necessary? */
         xhci_readl(xhci, &xhci->ir_set->irq_pending);
 }
@@ -266,19 +270,34 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 {
         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
         u32 temp, temp2;
+        union xhci_trb *trb;
 
         spin_lock(&xhci->lock);
+        trb = xhci->event_ring->dequeue;
         /* Check if the xHC generated the interrupt, or the irq is shared */
         temp = xhci_readl(xhci, &xhci->op_regs->status);
         temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+        if (temp == 0xffffffff && temp2 == 0xffffffff)
+                goto hw_died;
+
         if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
                 spin_unlock(&xhci->lock);
                 return IRQ_NONE;
         }
+        xhci_dbg(xhci, "op reg status = %08x\n", temp);
+        xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+        xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+        xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+                        (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+                        lower_32_bits(trb->link.segment_ptr),
+                        upper_32_bits(trb->link.segment_ptr),
+                        (unsigned int) trb->link.intr_target,
+                        (unsigned int) trb->link.control);
 
         if (temp & STS_FATAL) {
                 xhci_warn(xhci, "WARNING: Host System Error\n");
                 xhci_halt(xhci);
+hw_died:
                 xhci_to_hcd(xhci)->state = HC_STATE_HALT;
                 spin_unlock(&xhci->lock);
                 return -ESHUTDOWN;
@@ -295,6 +314,7 @@ void xhci_event_ring_work(unsigned long arg)
 {
         unsigned long flags;
         int temp;
+        u64 temp_64;
         struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
         int i, j;
 
@@ -311,9 +331,9 @@ void xhci_event_ring_work(unsigned long arg)
         xhci_dbg(xhci, "Event ring:\n");
         xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
         xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-        temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-        temp &= ERST_PTR_MASK;
-        xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+        temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+        temp_64 &= ~ERST_PTR_MASK;
+        xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
         xhci_dbg(xhci, "Command ring:\n");
         xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
         xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@ void xhci_event_ring_work(unsigned long arg)
 int xhci_run(struct usb_hcd *hcd)
 {
         u32 temp;
+        u64 temp_64;
         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
         void (*doorbell)(struct xhci_hcd *) = NULL;
 
@@ -382,6 +403,20 @@ int xhci_run(struct usb_hcd *hcd)
         add_timer(&xhci->event_ring_timer);
 #endif
 
+        xhci_dbg(xhci, "Command ring memory map follows:\n");
+        xhci_debug_ring(xhci, xhci->cmd_ring);
+        xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+        xhci_dbg_cmd_ptrs(xhci);
+
+        xhci_dbg(xhci, "ERST memory map follows:\n");
+        xhci_dbg_erst(xhci, &xhci->erst);
+        xhci_dbg(xhci, "Event ring:\n");
+        xhci_debug_ring(xhci, xhci->event_ring);
+        xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+        temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+        temp_64 &= ~ERST_PTR_MASK;
+        xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
         xhci_dbg(xhci, "// Set the interrupt modulation register\n");
         temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
         temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@ int xhci_run(struct usb_hcd *hcd)
         if (NUM_TEST_NOOPS > 0)
                 doorbell = xhci_setup_one_noop(xhci);
 
-        xhci_dbg(xhci, "Command ring memory map follows:\n");
-        xhci_debug_ring(xhci, xhci->cmd_ring);
-        xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
-        xhci_dbg_cmd_ptrs(xhci);
-
-        xhci_dbg(xhci, "ERST memory map follows:\n");
-        xhci_dbg_erst(xhci, &xhci->erst);
-        xhci_dbg(xhci, "Event ring:\n");
-        xhci_debug_ring(xhci, xhci->event_ring);
-        xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-        temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-        temp &= ERST_PTR_MASK;
-        xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
-        temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
-        xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
         temp = xhci_readl(xhci, &xhci->op_regs->command);
         temp |= (CMD_RUN);
         xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
                 goto exit;
         }
         if (usb_endpoint_xfer_control(&urb->ep->desc))
-                ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+                /* We have a spinlock and interrupts disabled, so we must pass
+                 * atomic context to this function, which may allocate memory.
+                 */
+                ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
                                 slot_id, ep_index);
         else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
-                ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+                ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
                                 slot_id, ep_index);
         else
                 ret = -EINVAL;
@@ -661,8 +683,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
                 goto done;
 
         xhci_dbg(xhci, "Cancel URB %p\n", urb);
+        xhci_dbg(xhci, "Event ring:\n");
+        xhci_debug_ring(xhci, xhci->event_ring);
         ep_index = xhci_get_endpoint_index(&urb->ep->desc);
         ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+        xhci_dbg(xhci, "Endpoint ring:\n");
+        xhci_debug_ring(xhci, ep_ring);
         td = (struct xhci_td *) urb->hcpriv;
 
         ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
         struct xhci_hcd *xhci;
-        struct xhci_device_control *in_ctx;
+        struct xhci_container_ctx *in_ctx, *out_ctx;
+        struct xhci_input_control_ctx *ctrl_ctx;
+        struct xhci_slot_ctx *slot_ctx;
         unsigned int last_ctx;
         unsigned int ep_index;
         struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
         }
 
         in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+        out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
         ep_index = xhci_get_endpoint_index(&ep->desc);
-        ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+        ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
         /* If the HC already knows the endpoint is disabled,
          * or the HCD has noted it is disabled, ignore this request
          */
         if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
-                        in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+                        ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
                 xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
                                 __func__, ep);
                 return 0;
         }
 
-        in_ctx->drop_flags |= drop_flag;
-        new_drop_flags = in_ctx->drop_flags;
+        ctrl_ctx->drop_flags |= drop_flag;
+        new_drop_flags = ctrl_ctx->drop_flags;
 
-        in_ctx->add_flags = ~drop_flag;
-        new_add_flags = in_ctx->add_flags;
+        ctrl_ctx->add_flags = ~drop_flag;
+        new_add_flags = ctrl_ctx->add_flags;
 
-        last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+        last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+        slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
         /* Update the last valid endpoint context, if we deleted the last one */
-        if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
-                in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-                in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+        if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+                slot_ctx->dev_info &= ~LAST_CTX_MASK;
+                slot_ctx->dev_info |= LAST_CTX(last_ctx);
         }
-        new_slot_info = in_ctx->slot.dev_info;
+        new_slot_info = slot_ctx->dev_info;
 
         xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
 
@@ -778,17 +809,22 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
                 struct usb_host_endpoint *ep)
 {
         struct xhci_hcd *xhci;
-        struct xhci_device_control *in_ctx;
+        struct xhci_container_ctx *in_ctx, *out_ctx;
         unsigned int ep_index;
         struct xhci_ep_ctx *ep_ctx;
+        struct xhci_slot_ctx *slot_ctx;
+        struct xhci_input_control_ctx *ctrl_ctx;
         u32 added_ctxs;
         unsigned int last_ctx;
         u32 new_add_flags, new_drop_flags, new_slot_info;
         int ret = 0;
 
         ret = xhci_check_args(hcd, udev, ep, 1, __func__);
-        if (ret <= 0)
+        if (ret <= 0) {
+                /* So we won't queue a reset ep command for a root hub */
+                ep->hcpriv = NULL;
                 return ret;
+        }
         xhci = hcd_to_xhci(hcd);
 
         added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
         }
 
         in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+        out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
         ep_index = xhci_get_endpoint_index(&ep->desc);
-        ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+        ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
         /* If the HCD has already noted the endpoint is enabled,
          * ignore this request.
          */
-        if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+        if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
                 xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
                                 __func__, ep);
                 return 0;
@@ -833,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
                 return -ENOMEM;
         }
 
-        in_ctx->add_flags |= added_ctxs;
-        new_add_flags = in_ctx->add_flags;
+        ctrl_ctx->add_flags |= added_ctxs;
+        new_add_flags = ctrl_ctx->add_flags;
 
         /* If xhci_endpoint_disable() was called for this endpoint, but the
          * xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
          * descriptors.  We must drop and re-add this endpoint, so we leave the
          * drop flags alone.
          */
-        new_drop_flags = in_ctx->drop_flags;
+        new_drop_flags = ctrl_ctx->drop_flags;
 
+        slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
         /* Update the last valid endpoint context, if we just added one past */
-        if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
-                in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-                in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+        if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+                slot_ctx->dev_info &= ~LAST_CTX_MASK;
+                slot_ctx->dev_info |= LAST_CTX(last_ctx);
         }
-        new_slot_info = in_ctx->slot.dev_info;
+        new_slot_info = slot_ctx->dev_info;
+
+        /* Store the usb_device pointer for later use */
+        ep->hcpriv = udev;
 
         xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
                         (unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
         return 0;
 }
 
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
 {
+        struct xhci_input_control_ctx *ctrl_ctx;
         struct xhci_ep_ctx *ep_ctx;
+        struct xhci_slot_ctx *slot_ctx;
         int i;
 
         /* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
          * untouched.  Make sure we don't leave any old state in the input
          * endpoint contexts.
          */
-        virt_dev->in_ctx->drop_flags = 0;
-        virt_dev->in_ctx->add_flags = 0;
-        virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+        ctrl_ctx->drop_flags = 0;
+        ctrl_ctx->add_flags = 0;
+        slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+        slot_ctx->dev_info &= ~LAST_CTX_MASK;
         /* Endpoint 0 is always valid */
-        virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+        slot_ctx->dev_info |= LAST_CTX(1);
         for (i = 1; i < 31; ++i) {
-                ep_ctx = &virt_dev->in_ctx->ep[i];
+                ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
                 ep_ctx->ep_info = 0;
                 ep_ctx->ep_info2 = 0;
-                ep_ctx->deq[0] = 0;
-                ep_ctx->deq[1] = 0;
+                ep_ctx->deq = 0;
                 ep_ctx->tx_info = 0;
         }
 }
@@ -903,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
         unsigned long flags;
         struct xhci_hcd *xhci;
         struct xhci_virt_device *virt_dev;
+        struct xhci_input_control_ctx *ctrl_ctx;
+        struct xhci_slot_ctx *slot_ctx;
 
         ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
         if (ret <= 0)
@@ -918,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
         virt_dev = xhci->devs[udev->slot_id];
 
         /* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
-        virt_dev->in_ctx->add_flags |= SLOT_FLAG;
-        virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
-        virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
-        virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+        ctrl_ctx->add_flags |= SLOT_FLAG;
+        ctrl_ctx->add_flags &= ~EP0_FLAG;
+        ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+        ctrl_ctx->drop_flags &= ~EP0_FLAG;
         xhci_dbg(xhci, "New Input Control Context:\n");
-        xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
-                        LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+        slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+        xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+                        LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
         spin_lock_irqsave(&xhci->lock, flags);
-        ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+        ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
                         udev->slot_id);
         if (ret < 0) {
                 spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
         }
 
         xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
-        xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
-                        LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+        xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+                        LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
-        xhci_zero_in_ctx(virt_dev);
+        xhci_zero_in_ctx(xhci, virt_dev);
         /* Free any old rings */
         for (i = 1; i < 31; ++i) {
                 if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
                         virt_dev->new_ep_rings[i] = NULL;
                 }
         }
-        xhci_zero_in_ctx(virt_dev);
+        xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints.  The core should have sent the control message
+ * to clear the halt condition.  However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+                struct usb_host_endpoint *ep)
+{
+        struct xhci_hcd *xhci;
+        struct usb_device *udev;
+        unsigned int ep_index;
+        unsigned long flags;
+        int ret;
+        struct xhci_dequeue_state deq_state;
+        struct xhci_ring *ep_ring;
+
+        xhci = hcd_to_xhci(hcd);
+        udev = (struct usb_device *) ep->hcpriv;
+        /* Called with a root hub endpoint (or an endpoint that wasn't added
+         * with xhci_add_endpoint()
+         */
+        if (!ep->hcpriv)
+                return;
+        ep_index = xhci_get_endpoint_index(&ep->desc);
+        ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+        if (!ep_ring->stopped_td) {
+                xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+                                ep->desc.bEndpointAddress);
+                return;
+        }
+
+        xhci_dbg(xhci, "Queueing reset endpoint command\n");
+        spin_lock_irqsave(&xhci->lock, flags);
+        ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+        /*
+         * Can't change the ring dequeue pointer until it's transitioned to the
+         * stopped state, which is only upon a successful reset endpoint
+         * command.  Better hope that last command worked!
+         */
+        if (!ret) {
+                xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+                /* We need to move the HW's dequeue pointer past this TD,
+                 * or it will attempt to resend it on the next doorbell ring.
+                 */
+                xhci_find_new_dequeue_state(xhci, udev->slot_id,
+                                ep_index, ep_ring->stopped_td, &deq_state);
+                xhci_dbg(xhci, "Queueing new dequeue state\n");
+                xhci_queue_new_dequeue_state(xhci, ep_ring,
+                                udev->slot_id,
+                                ep_index, &deq_state);
+                kfree(ep_ring->stopped_td);
+                xhci_ring_cmd_db(xhci);
+        }
+        spin_unlock_irqrestore(&xhci->lock, flags);
+
+        if (ret)
+                xhci_warn(xhci, "FIXME allocate a new ring segment\n");
 }
 
 /*
@@ -1120,7 +1229,9 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
         struct xhci_virt_device *virt_dev;
         int ret = 0;
         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-        u32 temp;
+        struct xhci_slot_ctx *slot_ctx;
+        struct xhci_input_control_ctx *ctrl_ctx;
+        u64 temp_64;
 
         if (!udev->slot_id) {
                 xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
         if (!udev->config)
                 xhci_setup_addressable_virt_dev(xhci, udev);
         /* Otherwise, assume the core has the device configured how it wants */
+        xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+        xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
         spin_lock_irqsave(&xhci->lock, flags);
-        ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
-                        udev->slot_id);
+        ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+                                        udev->slot_id);
         if (ret) {
                 spin_unlock_irqrestore(&xhci->lock, flags);
                 xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
         default:
                 xhci_err(xhci, "ERROR: unexpected command completion "
                                 "code 0x%x.\n", virt_dev->cmd_status);
+                xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+                xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
                 ret = -EINVAL;
                 break;
         }
         if (ret) {
                 return ret;
         }
-        temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
-        xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
-        temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
-        xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
-        xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
-                        udev->slot_id,
-                        &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
-                        xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
-        xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+        temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+        xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+        xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
                         udev->slot_id,
-                        &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
-                        xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+                        &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+                        (unsigned long long)
+                                xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
         xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
-                        (unsigned long long)virt_dev->out_ctx_dma);
+                        (unsigned long long)virt_dev->out_ctx->dma);
         xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
-        xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+        xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
         xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
-        xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+        xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
         /*
          * USB core uses address 1 for the roothubs, so we add one to the
          * address given back to us by the HC.
          */
-        udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+        slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+        udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
         /* Zero the input context control for later use */
-        virt_dev->in_ctx->add_flags = 0;
-        virt_dev->in_ctx->drop_flags = 0;
-        /* Mirror flags in the output context for future ep enable/disable */
-        virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
-        virt_dev->out_ctx->drop_flags = 0;
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+        ctrl_ctx->add_flags = 0;
+        ctrl_ctx->drop_flags = 0;
 
         xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
         /* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@ static int __init xhci_hcd_init(void)
         /* xhci_device_control has eight fields, and also
          * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
          */
-        BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
         BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
         BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
         BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c8a72de1c508..e6b9a1c6002d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -88,7 +88,7 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
                 return;
         prev->next = next;
         if (link_trbs) {
-                prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+                prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
 
                 /* Set the last TRB in the segment to have a TRB type ID of Link TRB */
                 val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
@@ -189,6 +189,63 @@ fail:
         return 0;
 }
 
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+                                                    int type, gfp_t flags)
+{
+        struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+        if (!ctx)
+                return NULL;
+
+        BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+        ctx->type = type;
+        ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+        if (type == XHCI_CTX_TYPE_INPUT)
+                ctx->size += CTX_SIZE(xhci->hcc_params);
+
+        ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+        memset(ctx->bytes, 0, ctx->size);
+        return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+                             struct xhci_container_ctx *ctx)
+{
+        dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+        kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+                                              struct xhci_container_ctx *ctx)
+{
+        BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+        return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+                                        struct xhci_container_ctx *ctx)
+{
+        if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+                return (struct xhci_slot_ctx *)ctx->bytes;
+
+        return (struct xhci_slot_ctx *)
+                (ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+                                    struct xhci_container_ctx *ctx,
+                                    unsigned int ep_index)
+{
+        /* increment ep index by offset of start of ep ctx array */
+        ep_index++;
+        if (ctx->type == XHCI_CTX_TYPE_INPUT)
+                ep_index++;
+
+        return (struct xhci_ep_ctx *)
+                (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
 /* All the xhci_tds in the ring's TD list should be freed at this point */
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 {
@@ -200,8 +257,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
                 return;
 
         dev = xhci->devs[slot_id];
-        xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
-        xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+        xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
         if (!dev)
                 return;
 
@@ -210,11 +266,10 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
                         xhci_ring_free(xhci, dev->ep_rings[i]);
 
         if (dev->in_ctx)
-                dma_pool_free(xhci->device_pool,
-                                dev->in_ctx, dev->in_ctx_dma);
+                xhci_free_container_ctx(xhci, dev->in_ctx);
         if (dev->out_ctx)
-                dma_pool_free(xhci->device_pool,
-                                dev->out_ctx, dev->out_ctx_dma);
+                xhci_free_container_ctx(xhci, dev->out_ctx);
+
         kfree(xhci->devs[slot_id]);
         xhci->devs[slot_id] = 0;
 }
@@ -222,7 +277,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
                 struct usb_device *udev, gfp_t flags)
 {
-        dma_addr_t      dma;
         struct xhci_virt_device *dev;
 
         /* Slot ID 0 is reserved */
@@ -236,23 +290,21 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
                 return 0;
         dev = xhci->devs[slot_id];
 
-        /* Allocate the (output) device context that will be used in the HC */
-        dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+        /* Allocate the (output) device context that will be used in the HC. */
+        dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
         if (!dev->out_ctx)
                 goto fail;
-        dev->out_ctx_dma = dma;
+
         xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
-                        (unsigned long long)dma);
-        memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+                        (unsigned long long)dev->out_ctx->dma);
 
         /* Allocate the (input) device context for address device command */
-        dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+        dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
         if (!dev->in_ctx)
                 goto fail;
-        dev->in_ctx_dma = dma;
+
         xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
-                        (unsigned long long)dma);
-        memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+                        (unsigned long long)dev->in_ctx->dma);
 
         /* Allocate endpoint 0 ring */
         dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
@@ -261,17 +313,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 
         init_completion(&dev->cmd_completion);
 
-        /*
-         * Point to output device context in dcbaa; skip the output control
-         * context, which is eight 32 bit fields (or 32 bytes long)
-         */
-        xhci->dcbaa->dev_context_ptrs[2*slot_id] =
-                (u32) dev->out_ctx_dma + (32);
+        /* Point to output device context in dcbaa. */
+        xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
         xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
                         slot_id,
-                        &xhci->dcbaa->dev_context_ptrs[2*slot_id],
-                        (unsigned long long)dev->out_ctx_dma);
-        xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+                        &xhci->dcbaa->dev_context_ptrs[slot_id],
+                        (unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
 
         return 1;
 fail:
@@ -285,6 +332,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
         struct xhci_virt_device *dev;
         struct xhci_ep_ctx      *ep0_ctx;
         struct usb_device       *top_dev;
+        struct xhci_slot_ctx    *slot_ctx;
+        struct xhci_input_control_ctx *ctrl_ctx;
 
         dev = xhci->devs[udev->slot_id];
         /* Slot ID 0 is reserved */
@@ -293,27 +342,29 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
                                 udev->slot_id);
                 return -EINVAL;
         }
-        ep0_ctx = &dev->in_ctx->ep[0];
+        ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+        ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+        slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
         /* 2) New slot context and endpoint 0 context are valid*/
-        dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+        ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
 
         /* 3) Only the control endpoint is valid - one endpoint context */
-        dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+        slot_ctx->dev_info |= LAST_CTX(1);
 
         switch (udev->speed) {
         case USB_SPEED_SUPER:
-                dev->in_ctx->slot.dev_info |= (u32) udev->route;
-                dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+                slot_ctx->dev_info |= (u32) udev->route;
+                slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
                 break;
         case USB_SPEED_HIGH:
-                dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+                slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
                 break;
         case USB_SPEED_FULL:
-                dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+                slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
                 break;
         case USB_SPEED_LOW:
-                dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+                slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
                 break;
         case USB_SPEED_VARIABLE:
                 xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -327,7 +378,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
         for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
                         top_dev = top_dev->parent)
                 /* Found device below root hub */;
-        dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+        slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
         xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
 
         /* Is this a LS/FS device under a HS hub? */
@@ -337,8 +388,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
          */
         if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
                         udev->tt) {
-                dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
-                dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+                slot_ctx->tt_info = udev->tt->hub->slot_id;
+                slot_ctx->tt_info |= udev->ttport << 8;
         }
         xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
         xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -360,10 +411,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
         ep0_ctx->ep_info2 |= MAX_BURST(0);
         ep0_ctx->ep_info2 |= ERROR_COUNT(3);
 
-        ep0_ctx->deq[0] =
+        ep0_ctx->deq =
                 dev->ep_rings[0]->first_seg->dma;
-        ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
-        ep0_ctx->deq[1] = 0;
+        ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
 
         /* Steps 7 and 8 were done in xhci_alloc_virt_device() */
 
@@ -470,25 +520,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
         unsigned int max_burst;
 
         ep_index = xhci_get_endpoint_index(&ep->desc);
-        ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+        ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
         /* Set up the endpoint ring */
         virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
         if (!virt_dev->new_ep_rings[ep_index])
                 return -ENOMEM;
         ep_ring = virt_dev->new_ep_rings[ep_index];
-        ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
-        ep_ctx->deq[1] = 0;
+        ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
 
         ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
 
         /* FIXME dig Mult and streams info out of ep companion desc */
 
-        /* Allow 3 retries for everything but isoc */
+        /* Allow 3 retries for everything but isoc;
+         * error count = 0 means infinite retries.
+         */
         if (!usb_endpoint_xfer_isoc(&ep->desc))
                 ep_ctx->ep_info2 = ERROR_COUNT(3);
         else
-                ep_ctx->ep_info2 = ERROR_COUNT(0);
+                ep_ctx->ep_info2 = ERROR_COUNT(1);
 
         ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
 
@@ -498,7 +549,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
                 max_packet = ep->desc.wMaxPacketSize;
                 ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
                 /* dig out max burst from ep companion desc */
-                max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+                if (!ep->ss_ep_comp) {
+                        xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+                        max_packet = 0;
+                } else {
+                        max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+                }
                 ep_ctx->ep_info2 |= MAX_BURST(max_packet);
                 break;
         case USB_SPEED_HIGH:
@@ -531,18 +587,114 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
         struct xhci_ep_ctx *ep_ctx;
 
         ep_index = xhci_get_endpoint_index(&ep->desc);
-        ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+        ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
         ep_ctx->ep_info = 0;
         ep_ctx->ep_info2 = 0;
-        ep_ctx->deq[0] = 0;
-        ep_ctx->deq[1] = 0;
+        ep_ctx->deq = 0;
         ep_ctx->tx_info = 0;
         /* Don't free the endpoint ring until the set interface or configuration
          * request succeeds.
          */
 }
 
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+        int i;
+        struct device *dev = xhci_to_hcd(xhci)->self.controller;
+        int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+        xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+        if (!num_sp)
+                return 0;
+
+        xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+        if (!xhci->scratchpad)
+                goto fail_sp;
+
+        xhci->scratchpad->sp_array =
+                pci_alloc_consistent(to_pci_dev(dev),
+                                     num_sp * sizeof(u64),
+                                     &xhci->scratchpad->sp_dma);
+        if (!xhci->scratchpad->sp_array)
+                goto fail_sp2;
+
+        xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+        if (!xhci->scratchpad->sp_buffers)
+                goto fail_sp3;
+
+        xhci->scratchpad->sp_dma_buffers =
+                kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+        if (!xhci->scratchpad->sp_dma_buffers)
+                goto fail_sp4;
+
+        xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+        for (i = 0; i < num_sp; i++) {
+                dma_addr_t dma;
+                void *buf = pci_alloc_consistent(to_pci_dev(dev),
+                                                 xhci->page_size, &dma);
+                if (!buf)
+                        goto fail_sp5;
+
+                xhci->scratchpad->sp_array[i] = dma;
+                xhci->scratchpad->sp_buffers[i] = buf;
+                xhci->scratchpad->sp_dma_buffers[i] = dma;
+        }
+
+        return 0;
+
+ fail_sp5:
+        for (i = i - 1; i >= 0; i--) {
+                pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+                                    xhci->scratchpad->sp_buffers[i],
+                                    xhci->scratchpad->sp_dma_buffers[i]);
+        }
+        kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+        kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+        pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+                            xhci->scratchpad->sp_array,
+                            xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+        kfree(xhci->scratchpad);
+        xhci->scratchpad = NULL;
+
+ fail_sp:
+        return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+        int num_sp;
+        int i;
+        struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+        if (!xhci->scratchpad)
+                return;
+
+        num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+        for (i = 0; i < num_sp; i++) {
+                pci_free_consistent(pdev, xhci->page_size,
+                                    xhci->scratchpad->sp_buffers[i],
+                                    xhci->scratchpad->sp_dma_buffers[i]);
+        }
+        kfree(xhci->scratchpad->sp_dma_buffers);
+        kfree(xhci->scratchpad->sp_buffers);
+        pci_free_consistent(pdev, num_sp * sizeof(u64),
+                            xhci->scratchpad->sp_array,
+                            xhci->scratchpad->sp_dma);
+        kfree(xhci->scratchpad);
+        xhci->scratchpad = NULL;
+}
+
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
         struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
@@ -551,10 +703,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
         /* Free the Event Ring Segment Table and the actual Event Ring */
         xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+        xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+        xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
         size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
         if (xhci->erst.entries)
                 pci_free_consistent(pdev, size,
@@ -566,8 +716,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->event_ring = NULL;
         xhci_dbg(xhci, "Freed event ring\n");
 
-        xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
-        xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+        xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
         if (xhci->cmd_ring)
                 xhci_ring_free(xhci, xhci->cmd_ring);
         xhci->cmd_ring = NULL;
@@ -586,8 +735,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->device_pool = NULL;
         xhci_dbg(xhci, "Freed device context pool\n");
 
-        xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
-        xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+        xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
         if (xhci->dcbaa)
                 pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
                                 xhci->dcbaa, xhci->dcbaa->dma);
@@ -595,6 +743,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
         xhci->page_size = 0;
         xhci->page_shift = 0;
+        scratchpad_free(xhci);
 }
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
@@ -602,6 +751,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         dma_addr_t      dma;
         struct device   *dev = xhci_to_hcd(xhci)->self.controller;
         unsigned int    val, val2;
+        u64             val_64;
         struct xhci_segment     *seg;
         u32 page_size;
         int i;
@@ -647,8 +797,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         xhci->dcbaa->dma = dma;
         xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
                         (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
-        xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
-        xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+        xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
 
         /*
          * Initialize the ring segment pool.  The ring must be a contiguous
@@ -658,11 +807,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
          */
         xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
                         SEGMENT_SIZE, 64, xhci->page_size);
+
         /* See Table 46 and Note on Figure 55 */
-        /* FIXME support 64-byte contexts */
         xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
-                        sizeof(struct xhci_device_control),
-                        64, xhci->page_size);
+                        2112, 64, xhci->page_size);
         if (!xhci->segment_pool || !xhci->device_pool)
                 goto fail;
 
@@ -675,14 +823,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
                         (unsigned long long)xhci->cmd_ring->first_seg->dma);
 
         /* Set the address in the Command Ring Control register */
-        val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-        val = (val & ~CMD_RING_ADDR_MASK) |
-                (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+        val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+        val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+                (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
                 xhci->cmd_ring->cycle_state;
-        xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
-        xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
-        xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
-        xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+        xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+        xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
         xhci_dbg_cmd_ptrs(xhci);
 
         val = xhci_readl(xhci, &xhci->cap_regs->db_off);
@@ -722,8 +868,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         /* set ring base address and size for each segment table entry */
         for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
                 struct xhci_erst_entry *entry = &xhci->erst.entries[val];
-                entry->seg_addr[0] = seg->dma;
-                entry->seg_addr[1] = 0;
+                entry->seg_addr = seg->dma;
                 entry->seg_size = TRBS_PER_SEGMENT;
                 entry->rsvd = 0;
                 seg = seg->next;
@@ -741,11 +886,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         /* set the segment table base address */
         xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
                         (unsigned long long)xhci->erst.erst_dma_addr);
-        val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
-        val &= ERST_PTR_MASK;
-        val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
-        xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+        val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+        val_64 &= ERST_PTR_MASK;
+        val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+        xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
 
         /* Set the event ring dequeue address */
         xhci_set_hc_event_deq(xhci);
@@ -761,7 +905,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
         for (i = 0; i < MAX_HC_SLOTS; ++i)
                 xhci->devs[i] = 0;
 
+        if (scratchpad_alloc(xhci, flags))
+                goto fail;
+
         return 0;
+
 fail:
         xhci_warn(xhci, "Couldn't initialize memory\n");
         xhci_mem_cleanup(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1462709e26c0..592fe7e623f7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -117,6 +117,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
         .free_dev =             xhci_free_dev,
         .add_endpoint =         xhci_add_endpoint,
         .drop_endpoint =        xhci_drop_endpoint,
+        .endpoint_reset =       xhci_endpoint_reset,
         .check_bandwidth =      xhci_check_bandwidth,
         .reset_bandwidth =      xhci_reset_bandwidth,
         .address_device =       xhci_address_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 02d81985c454..aa88a067148b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -135,6 +135,7 @@ static void next_trb(struct xhci_hcd *xhci,
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
         union xhci_trb *next = ++(ring->dequeue);
+        unsigned long long addr;
 
         ring->deq_updates++;
         /* Update the dequeue pointer further if that was a link TRB or we're at
@@ -152,6 +153,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
                 ring->dequeue = ring->deq_seg->trbs;
                 next = ring->dequeue;
         }
+        addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+        if (ring == xhci->event_ring)
+                xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+        else if (ring == xhci->cmd_ring)
+                xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+        else
+                xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -171,6 +179,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 {
         u32 chain;
         union xhci_trb *next;
+        unsigned long long addr;
 
         chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
         next = ++(ring->enqueue);
@@ -204,6 +213,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
                 ring->enqueue = ring->enq_seg->trbs;
                 next = ring->enqueue;
         }
+        addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+        if (ring == xhci->event_ring)
+                xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+        else if (ring == xhci->cmd_ring)
+                xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+        else
+                xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -237,7 +253,7 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 
 void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 {
-        u32 temp;
+        u64 temp;
         dma_addr_t deq;
 
         deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -246,13 +262,15 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
                 xhci_warn(xhci, "WARN something wrong with SW event ring "
                                 "dequeue ptr.\n");
         /* Update HC event ring dequeue pointer */
-        temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+        temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
         temp &= ERST_PTR_MASK;
-        if (!in_interrupt())
-                xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
-        xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
-        xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
-                        &xhci->ir_set->erst_dequeue[0]);
+        /* Don't clear the EHB bit (which is RW1C) because
+         * there might be more events to service.
+         */
+        temp &= ~ERST_EHB;
+        xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+        xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+                        &xhci->ir_set->erst_dequeue);
 }
 
 /* Ring the host controller doorbell after placing a command on the ring */
@@ -279,7 +297,8 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
         /* Don't ring the doorbell for this endpoint if there are pending
          * cancellations because the we don't want to interrupt processing.
          */
-        if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+        if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+                        && !(ep_ring->state & EP_HALTED)) {
                 field = xhci_readl(xhci, db_addr) & DB_MASK;
                 xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
                 /* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -316,12 +335,6 @@ static struct xhci_segment *find_trb_seg(
         return cur_seg;
 }
 
-struct dequeue_state {
-        struct xhci_segment *new_deq_seg;
-        union xhci_trb *new_deq_ptr;
-        int new_cycle_state;
-};
-
 /*
  * Move the xHC's endpoint ring dequeue pointer past cur_td.
  * Record the new state of the xHC's endpoint ring dequeue segment,
@@ -336,24 +349,30 @@ struct dequeue_state {
  *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
  *    if we've moved it past a link TRB with the toggle cycle bit set.
  */
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
                 unsigned int slot_id, unsigned int ep_index,
-                struct xhci_td *cur_td, struct dequeue_state *state)
+                struct xhci_td *cur_td, struct xhci_dequeue_state *state)
 {
         struct xhci_virt_device *dev = xhci->devs[slot_id];
         struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
         struct xhci_generic_trb *trb;
+        struct xhci_ep_ctx *ep_ctx;
+        dma_addr_t addr;
 
         state->new_cycle_state = 0;
+        xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
         state->new_deq_seg = find_trb_seg(cur_td->start_seg,
                         ep_ring->stopped_trb,
                         &state->new_cycle_state);
         if (!state->new_deq_seg)
                 BUG();
         /* Dig out the cycle state saved by the xHC during the stop ep cmd */
-        state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+        xhci_dbg(xhci, "Finding endpoint context\n");
+        ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+        state->new_cycle_state = 0x1 & ep_ctx->deq;
 
         state->new_deq_ptr = cur_td->last_trb;
+        xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
         state->new_deq_seg = find_trb_seg(state->new_deq_seg,
                         state->new_deq_ptr,
                         &state->new_cycle_state);
@@ -367,6 +386,12 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci,
         next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
         /* Don't update the ring cycle state for the producer (us). */
+        xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+                        state->new_deq_seg);
+        addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+        xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+                        (unsigned long long) addr);
+        xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
         ep_ring->dequeue = state->new_deq_ptr;
         ep_ring->deq_seg = state->new_deq_seg;
 }
@@ -416,6 +441,30 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
                 unsigned int ep_index, struct xhci_segment *deq_seg,
                 union xhci_trb *deq_ptr, u32 cycle_state);
 
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+                struct xhci_ring *ep_ring, unsigned int slot_id,
+                unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+        xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+                        "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+                        deq_state->new_deq_seg,
+                        (unsigned long long)deq_state->new_deq_seg->dma,
+                        deq_state->new_deq_ptr,
+                        (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+                        deq_state->new_cycle_state);
+        queue_set_tr_deq(xhci, slot_id, ep_index,
+                        deq_state->new_deq_seg,
+                        deq_state->new_deq_ptr,
+                        (u32) deq_state->new_cycle_state);
+        /* Stop the TD queueing code from ringing the doorbell until
+         * this command completes.  The HC won't set the dequeue pointer
+         * if the ring is running, and ringing the doorbell starts the
+         * ring running.
+         */
+        ep_ring->state |= SET_DEQ_PENDING;
+        xhci_ring_cmd_db(xhci);
+}
+
 /*
  * When we get a command completion for a Stop Endpoint Command, we need to
  * unlink any cancelled TDs from the ring.  There are two ways to do that:
@@ -436,7 +485,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
         struct xhci_td *cur_td = 0;
         struct xhci_td *last_unlinked_td;
 
-        struct dequeue_state deq_state;
+        struct xhci_dequeue_state deq_state;
 #ifdef CONFIG_USB_HCD_STAT
         ktime_t stop_time = ktime_get();
 #endif
@@ -464,7 +513,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
                  * move the xHC endpoint ring dequeue pointer past this TD.
                  */
                 if (cur_td == ep_ring->stopped_td)
-                        find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+                        xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
                                         &deq_state);
                 else
                         td_to_noop(xhci, ep_ring, cur_td);
@@ -480,24 +529,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 
         /* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
         if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
-                xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
-                                "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
-                                deq_state.new_deq_seg,
-                                (unsigned long long)deq_state.new_deq_seg->dma,
-                                deq_state.new_deq_ptr,
-                                (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
-                                deq_state.new_cycle_state);
-                queue_set_tr_deq(xhci, slot_id, ep_index,
-                                deq_state.new_deq_seg,
-                                deq_state.new_deq_ptr,
-                                (u32) deq_state.new_cycle_state);
-                /* Stop the TD queueing code from ringing the doorbell until
-                 * this command completes.  The HC won't set the dequeue pointer
-                 * if the ring is running, and ringing the doorbell starts the
-                 * ring running.
-                 */
-                ep_ring->state |= SET_DEQ_PENDING;
-                xhci_ring_cmd_db(xhci);
+                xhci_queue_new_dequeue_state(xhci, ep_ring,
+                                slot_id, ep_index, &deq_state);
         } else {
                 /* Otherwise just ring the doorbell to restart the ring */
                 ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -551,11 +584,15 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
         unsigned int ep_index;
         struct xhci_ring *ep_ring;
         struct xhci_virt_device *dev;
+        struct xhci_ep_ctx *ep_ctx;
+        struct xhci_slot_ctx *slot_ctx;
 
         slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
         ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
         dev = xhci->devs[slot_id];
         ep_ring = dev->ep_rings[ep_index];
+        ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+        slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
         if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
                 unsigned int ep_state;
@@ -569,9 +606,9 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
                 case COMP_CTX_STATE:
                         xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
                                         "to incorrect slot or ep state.\n");
-                        ep_state = dev->out_ctx->ep[ep_index].ep_info;
+                        ep_state = ep_ctx->ep_info;
                         ep_state &= EP_STATE_MASK;
-                        slot_state = dev->out_ctx->slot.dev_state;
+                        slot_state = slot_ctx->dev_state;
                         slot_state = GET_SLOT_STATE(slot_state);
                         xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
                                         slot_state, ep_state);
@@ -593,16 +630,33 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
                  * cancelling URBs, which might not be an error...
                  */
         } else {
-                xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
-                                "deq[1] = 0x%x.\n",
-                                dev->out_ctx->ep[ep_index].deq[0],
-                                dev->out_ctx->ep[ep_index].deq[1]);
+                xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+                                ep_ctx->deq);
         }
 
         ep_ring->state &= ~SET_DEQ_PENDING;
         ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+                struct xhci_event_cmd *event,
+                union xhci_trb *trb)
+{
+        int slot_id;
+        unsigned int ep_index;
+
+        slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+        ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+        /* This command will only fail if the endpoint wasn't halted,
+         * but we don't care.
+         */
+        xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+                        (unsigned int) GET_COMP_CODE(event->status));
+
+        /* Clear our internal halted state and restart the ring */
+        xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+        ring_ep_doorbell(xhci, slot_id, ep_index);
+}
 
 static void handle_cmd_completion(struct xhci_hcd *xhci,
                 struct xhci_event_cmd *event)
@@ -611,7 +665,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
         u64 cmd_dma;
         dma_addr_t cmd_dequeue_dma;
 
-        cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+        cmd_dma = event->cmd_trb;
         cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
                         xhci->cmd_ring->dequeue);
         /* Is the command ring deq ptr out of sync with the deq seg ptr? */
@@ -653,6 +707,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
         case TRB_TYPE(TRB_CMD_NOOP):
                 ++xhci->noops_handled;
                 break;
+        case TRB_TYPE(TRB_RESET_EP):
+                handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+                break;
         default:
                 /* Skip over unknown commands on the event ring */
                 xhci->error_bitmask |= 1 << 6;
@@ -756,7 +813,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
         union xhci_trb *event_trb;
         struct urb *urb = 0;
         int status = -EINPROGRESS;
+        struct xhci_ep_ctx *ep_ctx;
 
+        xhci_dbg(xhci, "In %s\n", __func__);
         xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
         if (!xdev) {
                 xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
@@ -765,17 +824,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 
         /* Endpoint ID is 1 based, our index is zero based */
         ep_index = TRB_TO_EP_ID(event->flags) - 1;
+        xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
         ep_ring = xdev->ep_rings[ep_index];
-        if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+        ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+        if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
                 xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
                 return -ENODEV;
         }
 
-        event_dma = event->buffer[0];
-        if (event->buffer[1] != 0)
-                xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+        event_dma = event->buffer;
         /* This TRB should be in the TD at the head of this ring's TD list */
+        xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
         if (list_empty(&ep_ring->td_list)) {
                 xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
                                 TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -785,11 +844,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                 urb = NULL;
                 goto cleanup;
         }
+        xhci_dbg(xhci, "%s - getting list entry\n", __func__);
         td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
 
         /* Is this a TRB in the currently executing TD? */
+        xhci_dbg(xhci, "%s - looking for TD\n", __func__);
         event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
                         td->last_trb, event_dma);
+        xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
         if (!event_seg) {
                 /* HC is busted, give up! */
                 xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
@@ -798,10 +860,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
         event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
         xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
                         (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
-        xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
-                        (unsigned int) event->buffer[0]);
-        xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
-                        (unsigned int) event->buffer[1]);
+        xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+                        lower_32_bits(event->buffer));
+        xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+                        upper_32_bits(event->buffer));
         xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
                         (unsigned int) event->transfer_len);
         xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
@@ -823,6 +885,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                 break;
         case COMP_STALL:
                 xhci_warn(xhci, "WARN: Stalled endpoint\n");
+                ep_ring->state |= EP_HALTED;
                 status = -EPIPE;
                 break;
         case COMP_TRB_ERR:
@@ -833,6 +896,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                 xhci_warn(xhci, "WARN: transfer error on endpoint\n");
                 status = -EPROTO;
                 break;
+        case COMP_BABBLE:
+                xhci_warn(xhci, "WARN: babble error on endpoint\n");
+                status = -EOVERFLOW;
+                break;
         case COMP_DB_ERR:
                 xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
                 status = -ENOSR;
@@ -874,15 +941,26 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                 if (event_trb != ep_ring->dequeue) {
                         /* The event was for the status stage */
                         if (event_trb == td->last_trb) {
-                                td->urb->actual_length =
-                                        td->urb->transfer_buffer_length;
+                                if (td->urb->actual_length != 0) {
+                                        /* Don't overwrite a previously set error code */
+                                        if (status == -EINPROGRESS || status == 0)
+                                                /* Did we already see a short data stage? */
+                                                status = -EREMOTEIO;
+                                } else {
+                                        td->urb->actual_length =
+                                                td->urb->transfer_buffer_length;
+                                }
                         } else {
                         /* Maybe the event was for the data stage? */
-                                if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+                                if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
                                         /* We didn't stop on a link TRB in the middle */
                                         td->urb->actual_length =
                                                 td->urb->transfer_buffer_length -
                                                 TRB_LEN(event->transfer_len);
+                                        xhci_dbg(xhci, "Waiting for status stage event\n");
+                                        urb = NULL;
+                                        goto cleanup;
+                                }
                         }
                 }
         } else {
@@ -929,16 +1007,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                                                         TRB_LEN(event->transfer_len));
                                         td->urb->actual_length = 0;
                                 }
-                                if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-                                        status = -EREMOTEIO;
-                                else
-                                        status = 0;
+                                /* Don't overwrite a previously set error code */
+                                if (status == -EINPROGRESS) {
+                                        if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+                                                status = -EREMOTEIO;
+                                        else
+                                                status = 0;
+                                }
                         } else {
                                 td->urb->actual_length = td->urb->transfer_buffer_length;
                                 /* Ignore a short packet completion if the
                                  * untransferred length was zero.
                                  */
-                                status = 0;
+                                if (status == -EREMOTEIO)
+                                        status = 0;
                         }
                 } else {
                         /* Slow path - walk the list, starting from the dequeue
@@ -965,19 +1047,30 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                                         TRB_LEN(event->transfer_len);
                 }
         }
-        /* The Endpoint Stop Command completion will take care of
-         * any stopped TDs.  A stopped TD may be restarted, so don't update the
-         * ring dequeue pointer or take this TD off any lists yet.
-         */
         if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
                         GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+                /* The Endpoint Stop Command completion will take care of any
+                 * stopped TDs.  A stopped TD may be restarted, so don't update
+                 * the ring dequeue pointer or take this TD off any lists yet.
+                 */
                 ep_ring->stopped_td = td;
                 ep_ring->stopped_trb = event_trb;
         } else {
-                /* Update ring dequeue pointer */
-                while (ep_ring->dequeue != td->last_trb)
+                if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+                        /* The transfer is completed from the driver's
+                         * perspective, but we need to issue a set dequeue
+                         * command for this stalled endpoint to move the dequeue
+                         * pointer past the TD.  We can't do that here because
+                         * the halt condition must be cleared first.
+                         */
+                        ep_ring->stopped_td = td;
+                        ep_ring->stopped_trb = event_trb;
+                } else {
+                        /* Update ring dequeue pointer */
+                        while (ep_ring->dequeue != td->last_trb)
+                                inc_deq(xhci, ep_ring, false);
                         inc_deq(xhci, ep_ring, false);
-                inc_deq(xhci, ep_ring, false);
+                }
 
                 /* Clean up the endpoint's TD list */
                 urb = td->urb;
@@ -987,7 +1080,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
                         list_del(&td->cancelled_td_list);
                         ep_ring->cancels_pending--;
                 }
-                kfree(td);
+                /* Leave the TD around for the reset endpoint function to use */
+                if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+                        kfree(td);
+                }
                 urb->hcpriv = NULL;
         }
 cleanup:
@@ -997,6 +1093,8 @@ cleanup:
         /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
         if (urb) {
                 usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+                xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+                                urb, td->urb->actual_length, status);
                 spin_unlock(&xhci->lock);
                 usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
                 spin_lock(&xhci->lock);
@@ -1014,6 +1112,7 @@ void xhci_handle_event(struct xhci_hcd *xhci)
         int update_ptrs = 1;
         int ret;
 
+        xhci_dbg(xhci, "In %s\n", __func__);
         if (!xhci->event_ring || !xhci->event_ring->dequeue) {
                 xhci->error_bitmask |= 1 << 1;
                 return;
@@ -1026,18 +1125,25 @@ void xhci_handle_event(struct xhci_hcd *xhci)
                 xhci->error_bitmask |= 1 << 2;
                 return;
         }
+        xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
 
         /* FIXME: Handle more event types. */
         switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
         case TRB_TYPE(TRB_COMPLETION):
+                xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
                 handle_cmd_completion(xhci, &event->event_cmd);
+                xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
                 break;
         case TRB_TYPE(TRB_PORT_STATUS):
+                xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
                 handle_port_status(xhci, event);
+                xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
                 update_ptrs = 0;
                 break;
         case TRB_TYPE(TRB_TRANSFER):
+                xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
                 ret = handle_tx_event(xhci, &event->trans_event);
+                xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
                 if (ret < 0)
                         xhci->error_bitmask |= 1 << 9;
                 else
@@ -1093,13 +1199,13 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
                  */
                 xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
                 return -ENOENT;
-        case EP_STATE_HALTED:
         case EP_STATE_ERROR:
-                xhci_warn(xhci, "WARN waiting for halt or error on ep "
-                                "to be cleared\n");
+                xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
                 /* FIXME event handling code for error needs to clear it */
                 /* XXX not sure if this should be -ENOENT or not */
                 return -EINVAL;
+        case EP_STATE_HALTED:
+                xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
         case EP_STATE_STOPPED:
         case EP_STATE_RUNNING:
                 break;
@@ -1128,9 +1234,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
                 gfp_t mem_flags)
 {
         int ret;
-
+        struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
         ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
-                        xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+                        ep_ctx->ep_info & EP_STATE_MASK,
                         num_trbs, mem_flags);
         if (ret)
                 return ret;
@@ -1285,6 +1391,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         /* Queue the first TRB, even if it's zero-length */
         do {
                 u32 field = 0;
+                u32 length_field = 0;
 
                 /* Don't change the cycle bit of the first TRB until later */
                 if (first_trb)
@@ -1314,10 +1421,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                                         (unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
                                         (unsigned int) addr + trb_buff_len);
                 }
+                length_field = TRB_LEN(trb_buff_len) |
+                        TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+                        TRB_INTR_TARGET(0);
                 queue_trb(xhci, ep_ring, false,
-                                (u32) addr,
-                                (u32) ((u64) addr >> 32),
-                                TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+                                lower_32_bits(addr),
+                                upper_32_bits(addr),
+                                length_field,
                                 /* We always want to know if the TRB was short,
                                  * or we won't get an event when it completes.
                                  * (Unless we use event data TRBs, which are a
@@ -1365,7 +1475,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         struct xhci_generic_trb *start_trb;
         bool first_trb;
         int start_cycle;
-        u32 field;
+        u32 field, length_field;
 
         int running_total, trb_buff_len, ret;
         u64 addr;
@@ -1443,10 +1553,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                         td->last_trb = ep_ring->enqueue;
                         field |= TRB_IOC;
                 }
+                length_field = TRB_LEN(trb_buff_len) |
+                        TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+                        TRB_INTR_TARGET(0);
                 queue_trb(xhci, ep_ring, false,
-                                (u32) addr,
-                                (u32) ((u64) addr >> 32),
-                                TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+                                lower_32_bits(addr),
+                                upper_32_bits(addr),
+                                length_field,
                                 /* We always want to know if the TRB was short,
                                  * or we won't get an event when it completes.
                                  * (Unless we use event data TRBs, which are a
@@ -1478,7 +1591,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
         struct usb_ctrlrequest *setup;
         struct xhci_generic_trb *start_trb;
         int start_cycle;
-        u32 field;
+        u32 field, length_field;
         struct xhci_td *td;
 
         ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
@@ -1528,13 +1641,16 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
         /* If there's data, queue data TRBs */
         field = 0;
+        length_field = TRB_LEN(urb->transfer_buffer_length) |
+                TD_REMAINDER(urb->transfer_buffer_length) |
+                TRB_INTR_TARGET(0);
         if (urb->transfer_buffer_length > 0) {
                 if (setup->bRequestType & USB_DIR_IN)
                         field |= TRB_DIR_IN;
                 queue_trb(xhci, ep_ring, false,
                                 lower_32_bits(urb->transfer_dma),
                                 upper_32_bits(urb->transfer_dma),
-                                TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+                                length_field,
                                 /* Event on short tx */
                                 field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
         }
@@ -1603,7 +1719,8 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
                 u32 slot_id)
 {
-        return queue_command(xhci, in_ctx_ptr, 0, 0,
+        return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+                        upper_32_bits(in_ctx_ptr), 0,
                         TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1611,7 +1728,8 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
                 u32 slot_id)
 {
-        return queue_command(xhci, in_ctx_ptr, 0, 0,
+        return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+                        upper_32_bits(in_ctx_ptr), 0,
                         TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1639,10 +1757,23 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
         u32 type = TRB_TYPE(TRB_SET_DEQ);
 
         addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
-        if (addr == 0)
+        if (addr == 0) {
                 xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
                 xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
                                 deq_seg, deq_ptr);
-        return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+                return 0;
+        }
+        return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+                        upper_32_bits(addr), 0,
                         trb_slot_id | trb_ep_index | type);
 }
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+                unsigned int ep_index)
+{
+        u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+        u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+        u32 type = TRB_TYPE(TRB_RESET_EP);
+
+        return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8936eeb5588b..d31d32206ba3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -25,6 +25,7 @@
 
 #include <linux/usb.h>
 #include <linux/timer.h>
+#include <linux/kernel.h>
 
 #include "../core/hcd.h"
 /* Code sharing between pci-quirks and xhci hcd */
@@ -42,14 +43,6 @@
  * xHCI register interface.
  * This corresponds to the eXtensible Host Controller Interface (xHCI)
  * Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers.  Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
  */
 
 /**
@@ -96,6 +89,7 @@ struct xhci_cap_regs {
 #define HCS_ERST_MAX(p)         (((p) >> 4) & 0xf)
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
 /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -166,10 +160,10 @@ struct xhci_op_regs {
         u32     reserved1;
         u32     reserved2;
         u32     dev_notification;
-        u32     cmd_ring[2];
+        u64     cmd_ring;
         /* rsvd: offset 0x20-2F */
         u32     reserved3[4];
-        u32     dcbaa_ptr[2];
+        u64     dcbaa_ptr;
         u32     config_reg;
         /* rsvd: offset 0x3C-3FF */
         u32     reserved4[241];
@@ -254,7 +248,7 @@ struct xhci_op_regs {
 #define CMD_RING_RUNNING        (1 << 3)
 /* bits 4:5 reserved and should be preserved */
 /* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK      (0xffffffc0)
+#define CMD_RING_RSVD_BITS      (0x3f)
 
 /* CONFIG - Configure Register - config_reg bitmasks */
 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
@@ -382,8 +376,8 @@ struct xhci_intr_reg {
         u32     irq_control;
         u32     erst_size;
         u32     rsvd;
-        u32     erst_base[2];
-        u32     erst_dequeue[2];
+        u64     erst_base;
+        u64     erst_dequeue;
 };
 
 /* irq_pending bitmasks */
@@ -453,6 +447,27 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_container_ctx
+ * @type: Type of context.  Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context.  Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+        unsigned type;
+#define XHCI_CTX_TYPE_DEVICE  0x1
+#define XHCI_CTX_TYPE_INPUT   0x2
+
+        int size;
+
+        u8 *bytes;
+        dma_addr_t dma;
+};
+
+/**
  * struct xhci_slot_ctx
  * @dev_info:   Route string, device speed, hub info, and last valid endpoint
  * @dev_info2:  Max exit latency for device number, root hub port number
@@ -538,7 +553,7 @@ struct xhci_slot_ctx {
 struct xhci_ep_ctx {
         u32     ep_info;
         u32     ep_info2;
-        u32     deq[2];
+        u64     deq;
         u32     tx_info;
         /* offset 0x14 - 0x1f reserved for HC internal use */
         u32     reserved[3];
@@ -589,18 +604,16 @@ struct xhci_ep_ctx {
 
 
 /**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
  *
  * @drop_context:       set the bit of the endpoint context you want to disable
  * @add_context:        set the bit of the endpoint context you want to enable
  */
-struct xhci_device_control {
+struct xhci_input_control_ctx {
         u32     drop_flags;
         u32     add_flags;
-        u32     rsvd[6];
-        struct xhci_slot_ctx    slot;
-        struct xhci_ep_ctx      ep[31];
+        u32     rsvd2[6];
 };
 
 /* drop context bitmasks */
@@ -608,7 +621,6 @@ struct xhci_device_control {
 /* add context bitmasks */
 #define ADD_EP(x)       (0x1 << x)
 
-
 struct xhci_virt_device {
         /*
          * Commands to the hardware are passed an "input context" that
@@ -618,11 +630,10 @@ struct xhci_virt_device {
          * track of input and output contexts separately because
          * these commands might fail and we don't trust the hardware.
          */
-        struct xhci_device_control      *out_ctx;
-        dma_addr_t                      out_ctx_dma;
+        struct xhci_container_ctx       *out_ctx;
         /* Used for addressing devices and configuration changes */
-        struct xhci_device_control      *in_ctx;
-        dma_addr_t                      in_ctx_dma;
+        struct xhci_container_ctx       *in_ctx;
+
         /* FIXME when stream support is added */
         struct xhci_ring                *ep_rings[31];
         /* Temporary storage in case the configure endpoint command fails and we
@@ -641,7 +652,7 @@ struct xhci_virt_device {
  */
 struct xhci_device_context_array {
         /* 64-bit device addresses; we only write 32-bit addresses */
-        u32                     dev_context_ptrs[2*MAX_HC_SLOTS];
+        u64                     dev_context_ptrs[MAX_HC_SLOTS];
         /* private xHCD pointers */
         dma_addr_t      dma;
 };
@@ -654,7 +665,7 @@ struct xhci_device_context_array {
 
 struct xhci_stream_ctx {
         /* 64-bit stream ring address, cycle state, and stream type */
-        u32     stream_ring[2];
+        u64     stream_ring;
         /* offset 0x14 - 0x1f reserved for HC internal use */
         u32     reserved[2];
 };
@@ -662,7 +673,7 @@ struct xhci_stream_ctx {
 
 struct xhci_transfer_event {
         /* 64-bit buffer address, or immediate data */
-        u32     buffer[2];
+        u64     buffer;
         u32     transfer_len;
         /* This field is interpreted differently based on the type of TRB */
         u32     flags;
@@ -744,7 +755,7 @@ struct xhci_transfer_event {
 
 struct xhci_link_trb {
         /* 64-bit segment pointer*/
-        u32 segment_ptr[2];
+        u64 segment_ptr;
         u32 intr_target;
         u32 control;
 };
@@ -755,7 +766,7 @@ struct xhci_link_trb {
 /* Command completion event TRB */
 struct xhci_event_cmd {
         /* Pointer to command TRB, or the value passed by the event data trb */
-        u32 cmd_trb[2];
+        u64 cmd_trb;
         u32 status;
         u32 flags;
 };
@@ -848,8 +859,8 @@ union xhci_trb {
 #define TRB_CONFIG_EP           12
 /* Evaluate Context Command */
 #define TRB_EVAL_CONTEXT        13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING          14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP            14
 /* Stop Transfer Ring Command */
 #define TRB_STOP_RING           15
 /* Set Transfer Ring Dequeue Pointer Command */
@@ -929,6 +940,7 @@ struct xhci_ring {
         unsigned int            cancels_pending;
         unsigned int            state;
 #define SET_DEQ_PENDING         (1 << 0)
+#define EP_HALTED               (1 << 1)
         /* The TRB that was last reported in a stopped endpoint ring */
         union xhci_trb          *stopped_trb;
         struct xhci_td          *stopped_td;
@@ -940,9 +952,15 @@ struct xhci_ring {
         u32                     cycle_state;
 };
 
+struct xhci_dequeue_state {
+        struct xhci_segment *new_deq_seg;
+        union xhci_trb *new_deq_ptr;
+        int new_cycle_state;
+};
+
 struct xhci_erst_entry {
         /* 64-bit event ring segment address */
-        u32     seg_addr[2];
+        u64     seg_addr;
         u32     seg_size;
         /* Set to zero */
         u32     rsvd;
@@ -957,6 +975,13 @@ struct xhci_erst {
         unsigned int            erst_size;
 };
 
+struct xhci_scratchpad {
+        u64 *sp_array;
+        dma_addr_t sp_dma;
+        void **sp_buffers;
+        dma_addr_t *sp_dma_buffers;
+};
+
 /*
  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1011,6 +1036,9 @@ struct xhci_hcd {
         struct xhci_ring        *cmd_ring;
         struct xhci_ring        *event_ring;
         struct xhci_erst        erst;
+        /* Scratchpad */
+        struct xhci_scratchpad  *scratchpad;
+
         /* slot enabling and address device helpers */
         struct completion       addr_dev;
         int slot_id;
@@ -1071,13 +1099,43 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
 static inline void xhci_writel(struct xhci_hcd *xhci,
                 const unsigned int val, __u32 __iomem *regs)
 {
-        if (!in_interrupt())
-                xhci_dbg(xhci,
-                         "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
-                         regs, val);
+        xhci_dbg(xhci,
+                        "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+                        regs, val);
         writel(val, regs);
 }
 
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers.  Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+                __u64 __iomem *regs)
+{
+        __u32 __iomem *ptr = (__u32 __iomem *) regs;
+        u64 val_lo = readl(ptr);
+        u64 val_hi = readl(ptr + 1);
+        return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+                const u64 val, __u64 __iomem *regs)
+{
+        __u32 __iomem *ptr = (__u32 __iomem *) regs;
+        u32 val_lo = lower_32_bits(val);
+        u32 val_hi = upper_32_bits(val);
+
+        xhci_dbg(xhci,
+                        "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+                        regs, (long unsigned int) val);
+        writel(val_lo, ptr);
+        writel(val_hi, ptr + 1);
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1090,7 +1148,7 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
 
 /* xHCI memory managment */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1128,6 +1186,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 
@@ -1148,10 +1207,23 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
                 int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
                 u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+                unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+                unsigned int slot_id, unsigned int ep_index,
+                struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+                struct xhci_ring *ep_ring, unsigned int slot_id,
+                unsigned int ep_index, struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
                 char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
 #endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a68d91a11bee..abe3aa67ed00 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -220,7 +220,7 @@ config USB_IOWARRIOR
 
 config USB_TEST
         tristate "USB testing driver"
-        depends on USB && USB_DEVICEFS
+        depends on USB
         help
           This driver is for testing host controller software.  It is used
           with specialized device firmware for regression and stress testing,
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3c5fe5cee05a..90e1a8dedfa9 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/usb/iowarrior.h>
 
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index deb95bb49fd1..d645f3899fe1 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/random.h>
 #include <linux/poll.h>
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e0ff9ccd866b..29092b8e59ce 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
 #include <asm/uaccess.h>
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 8a39de3e6e47..59bf949e589b 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -5,7 +5,6 @@
 
 #include <linux/slab.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/dmapool.h>
 
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7daa4099..e16ff605c458 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
 #include <mach/hardware.h>
 #include <mach/memory.h>
 #include <mach/gpio.h>
+#include <mach/cputype.h>
 
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
 
 #ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV          87
+#define GPIO_nVBUS_DRV          144
 #endif
 
 #include "davinci.h"
@@ -329,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
                         mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
                         WARNING("VBUS error workaround (delay coming)\n");
                 } else if (is_host_enabled(musb) && drvvbus) {
-                        musb->is_active = 1;
                         MUSB_HST_MODE(musb);
                         musb->xceiv->default_a = 1;
                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
                         portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
                 }
 
-                /* NOTE:  this must complete poweron within 100 msec */
+                /* NOTE:  this must complete poweron within 100 msec
+                 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+                 */
                 davinci_source_power(musb, drvvbus, 0);
                 DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
                                 drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@ int __init musb_platform_init(struct musb *musb)
                 __raw_writel(phy_ctrl, USB_PHY_CTRL);
         }
 
+        /* On dm355, the default-A state machine needs DRVVBUS control.
+         * If we won't be a host, there's no need to turn it on.
+         */
+        if (cpu_is_davinci_dm355()) {
+                u32     deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+                if (is_host_enabled(musb)) {
+                        deepsleep &= ~DRVVBUS_OVERRIDE;
+                } else {
+                        deepsleep &= ~DRVVBUS_FORCE;
+                        deepsleep |= DRVVBUS_OVERRIDE;
+                }
+                __raw_writel(deepsleep, DM355_DEEPSLEEP);
+        }
+
         /* reset the controller */
         musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
 
@@ -437,6 +454,15 @@ int musb_platform_exit(struct musb *musb)
         if (is_host_enabled(musb))
                 del_timer_sync(&otg_workaround);
 
+        /* force VBUS off */
+        if (cpu_is_davinci_dm355()) {
+                u32     deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+                deepsleep &= ~DRVVBUS_FORCE;
+                deepsleep |= DRVVBUS_OVERRIDE;
+                __raw_writel(deepsleep, DM355_DEEPSLEEP);
+        }
+
         davinci_source_power(musb, 0 /*off*/, 1);
 
         /* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 554a414f65d1..c7c1ca0494cd 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1326,7 +1326,6 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
         int             i;
 
         /* log core options (read using indexed model) */
-        musb_ep_select(mbase, 0);
         reg = musb_read_configdata(mbase);
 
         strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
@@ -1990,7 +1989,7 @@ bad_config:
         if (status < 0)
                 goto fail2;
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
         setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
 #endif
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f3772ca3b2cf..381d648a36b8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,7 +38,6 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/timer.h>
 #include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 40ed50ecedff..7a6778675ad3 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -407,7 +407,7 @@ stall:
                                         csr |= MUSB_RXCSR_P_SENDSTALL
                                                 | MUSB_RXCSR_FLUSHFIFO
                                                 | MUSB_RXCSR_CLRDATATOG
-                                                | MUSB_TXCSR_P_WZC_BITS;
+                                                | MUSB_RXCSR_P_WZC_BITS;
                                         musb_writew(regs, MUSB_RXCSR,
                                                         csr);
                                 }
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a350a414..cf94511485f2 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
                 musb_save_toggle(qh, is_in, urb);
                 break;
         case USB_ENDPOINT_XFER_ISOC:
-                if (urb->error_count)
+                if (status == 0 && urb->error_count)
                         status = -EXDEV;
                 break;
         }
@@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd)
 static int musb_bus_suspend(struct usb_hcd *hcd)
 {
         struct musb     *musb = hcd_to_musb(hcd);
+        u8              devctl;
 
-        if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+        if (!is_host_active(musb))
                 return 0;
 
-        if (is_host_active(musb) && musb->is_active) {
-                WARNING("trying to suspend as %s is_active=%i\n",
-                        otg_state_string(musb), musb->is_active);
+        switch (musb->xceiv->state) {
+        case OTG_STATE_A_SUSPEND:
+                return 0;
+        case OTG_STATE_A_WAIT_VRISE:
+                /* ID could be grounded even if there's no device
+                 * on the other end of the cable.  NOTE that the
+                 * A_WAIT_VRISE timers are messy with MUSB...
+                 */
+                devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+                if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+                        musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+                break;
+        default:
+                break;
+        }
+
+        if (musb->is_active) {
+                WARNING("trying to suspend as %s while active\n",
+                                otg_state_string(musb));
                 return -EBUSY;
         } else
                 return 0;
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index de3b2f18db44..fbfd3fd9ce1f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -323,6 +323,7 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
+        musb_writeb(mbase, MUSB_INDEX, 0);
         return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
 }
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 69feeec1628c..aa884d072f0b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,18 +59,4 @@ config NOP_USB_XCEIV
          built-in with usb ip or which are autonomous and doesn't require any
          phy programming such as ISP1x04 etc.
 
-config USB_LANGWELL_OTG
-        tristate "Intel Langwell USB OTG dual-role support"
-        depends on USB && MRST
-        select USB_OTG
-        select USB_OTG_UTILS
-        help
-          Say Y here if you want to build Intel Langwell USB OTG
-          transciever driver in kernel. This driver implements role
-          switch between EHCI host driver and Langwell USB OTG
-          client driver.
-
-          To compile this driver as a module, choose M here: the
-          module will be called langwell_otg.
-
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 6d1abdd3c0ac..208167856529 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)     += gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)      += isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)       += twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG)  += langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)     += nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)     += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index 6f628d0e9f39..000000000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define DRIVER_DESC             "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION          "3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-                        const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-                                struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-                                struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
-        .class =        ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
-        .class_mask =   ~0,
-        .vendor =       0x8086,
-        .device =       0x0811,
-        .subvendor =    PCI_ANY_ID,
-        .subdevice =    PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
-        .name =         (char *) driver_name,
-        .id_table =     pci_ids,
-
-        .probe =        langwell_otg_probe,
-        .remove =       langwell_otg_remove,
-
-        .suspend =      langwell_otg_suspend,
-        .resume =       langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
-        switch (state) {
-        case OTG_STATE_A_IDLE:
-                return "a_idle";
-        case OTG_STATE_A_WAIT_VRISE:
-                return "a_wait_vrise";
-        case OTG_STATE_A_WAIT_BCON:
-                return "a_wait_bcon";
-        case OTG_STATE_A_HOST:
-                return "a_host";
-        case OTG_STATE_A_SUSPEND:
-                return "a_suspend";
-        case OTG_STATE_A_PERIPHERAL:
-                return "a_peripheral";
-        case OTG_STATE_A_WAIT_VFALL:
-                return "a_wait_vfall";
-        case OTG_STATE_A_VBUS_ERR:
-                return "a_vbus_err";
-        case OTG_STATE_B_IDLE:
-                return "b_idle";
-        case OTG_STATE_B_SRP_INIT:
-                return "b_srp_init";
-        case OTG_STATE_B_PERIPHERAL:
-                return "b_peripheral";
-        case OTG_STATE_B_WAIT_ACON:
-                return "b_wait_acon";
-        case OTG_STATE_B_HOST:
-                return "b_host";
-        default:
-                return "UNDEFINED";
-        }
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
-        struct langwell_otg_timer *timer;
-        timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
-        timer->function = function;
-        timer->expires = expires;
-        timer->data = data;
-        return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
-        *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
-        *b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
-        otg_dbg("transceiver driver is notified\n");
-        queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
-                                        struct usb_bus *host)
-{
-        otg->host = host;
-
-        return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
-                                        struct usb_gadget *gadget)
-{
-        otg->gadget = gadget;
-
-        return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
-                                unsigned mA)
-{
-        return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
-        struct ipc_pmic_reg_data        pmic_data = {0};
-        struct ipc_pmic_reg_data        battery_data;
-
-        /* Check if battery is attached or not */
-        battery_data.pmic_reg_data[0].register_address = 0xd2;
-        battery_data.ioc = 0;
-        battery_data.num_entries = 1;
-        if (ipc_pmic_register_read(&battery_data)) {
-                otg_dbg("Failed to read PMIC register 0xd2.\n");
-                return;
-        }
-
-        if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
-                otg_dbg("no battery attached\n");
-                return;
-        }
-
-        /* Workaround for battery attachment issue */
-        if (battery_data.pmic_reg_data[0].value == 0x34) {
-                otg_dbg("battery \n");
-                return;
-        }
-
-        otg_dbg("battery attached\n");
-
-        pmic_data.ioc = 0;
-        pmic_data.pmic_reg_data[0].register_address = 0xD4;
-        pmic_data.num_entries = 1;
-        if (on)
-                pmic_data.pmic_reg_data[0].value = 0x20;
-        else
-                pmic_data.pmic_reg_data[0].value = 0xc0;
-
-        if (ipc_pmic_register_write(&pmic_data, TRUE))
-                otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
-        u32     val;
-
-        val = readl(the_transceiver->regs + CI_OTGSC);
-
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
-                                the_transceiver->regs + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
-                                the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
-        u32     val;
-
-        otg_dbg("Start SRP ->\n");
-
-        val = readl(the_transceiver->regs + CI_OTGSC);
-
-        writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
-                the_transceiver->regs + CI_OTGSC);
-
-        /* Check if the data plus is finished or not */
-        msleep(8);
-        val = readl(the_transceiver->regs + CI_OTGSC);
-        if (val & (OTGSC_HADP | OTGSC_DP))
-                otg_dbg("DataLine SRP Error\n");
-
-        /* FIXME: VBus SRP */
-
-        return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
-        struct usb_hcd  *hcd;
-        int             err;
-
-        otg_dbg("loc_sof -> %d\n", on);
-
-        hcd = bus_to_hcd(the_transceiver->otg.host);
-        if (on)
-                err = hcd->driver->bus_resume(hcd);
-        else
-                err = hcd->driver->bus_suspend(hcd);
-
-        if (err)
-                otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
-        u32     val;
-
-        otg_dbg("phy low power mode-> %d\n", on);
-
-        val = readl(the_transceiver->regs + CI_HOSTPC1);
-        if (on)
-                writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-        else
-                writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
-        u32 val;
-
-        otg_dbg("interrupt -> %d\n", on);
-
-        val = readl(the_transceiver->regs + CI_OTGSC);
-        if (on) {
-                val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
-                writel(val, the_transceiver->regs + CI_OTGSC);
-        } else {
-                val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
-                writel(val, the_transceiver->regs + CI_OTGSC);
-        }
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
-        u32     val;
-
-        otg_dbg("HAAR -> %d\n", on);
-
-        val = readl(the_transceiver->regs + CI_OTGSC);
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
-                                the_transceiver->regs + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
-                                the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
-        u32     val;
-
-        otg_dbg("HABA -> %d\n", on);
-
-        val = readl(the_transceiver->regs + CI_OTGSC);
-        if (on)
-                writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
-                                the_transceiver->regs + CI_OTGSC);
-        else
-                writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
-                                the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
-        u32 val;
-
-        int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
-        otg_dbg("check_se0_srp -> \n");
-
-        do {
-                udelay(100);
-                if (!delay_time--)
-                        break;
-                val = readl(the_transceiver->regs + CI_PORTSC1);
-                val &= PORTSC_LS;
-        } while (!val);
-
-        otg_dbg("check_se0_srp <- \n");
-        return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
-        *(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
-        switch (indicator) {
-        case 2:
-        case 4:
-        case 6:
-        case 7:
-                printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
-                                indicator);
-                break;
-        case 3:
-                printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
-                                indicator);
-                break;
-        default:
-                printk(KERN_ERR "Do not have this kind of NSF\n");
-                break;
-        }
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
-        /* HSM used timers */
-        a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
-                                (unsigned long)&hsm->a_wait_vrise_tmout);
-        a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
-                                (unsigned long)&hsm->a_wait_bcon_tmout);
-        a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
-                                (unsigned long)&hsm->a_aidl_bdis_tmout);
-        b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
-                                (unsigned long)&hsm->b_ase0_brst_tmout);
-        b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
-                                (unsigned long)&hsm->b_se0_srp);
-        b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
-                                (unsigned long)&hsm->b_srp_res_tmout);
-        b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
-                                (unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
-        kfree(a_wait_vrise_tmr);
-        kfree(a_wait_bcon_tmr);
-        kfree(a_aidl_bdis_tmr);
-        kfree(b_ase0_brst_tmr);
-        kfree(b_se0_srp_tmr);
-        kfree(b_srp_res_tmr);
-        kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
-        struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-        struct langwell_otg_timer *tmp_timer;
-        u32     val32;
-
-        /* Check if the timer is already in the active list,
-         * if so update timer count
-         */
-        list_for_each_entry(tmp_timer, &active_timers, list)
-                if (tmp_timer == timer) {
-                        timer->count = timer->expires;
-                        return;
-                }
-        timer->count = timer->expires;
-
-        if (list_empty(&active_timers)) {
-                val32 = readl(the_transceiver->regs + CI_OTGSC);
-                writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
-        }
-
-        list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
-        struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
-        struct langwell_otg_timer *tmp_timer, *del_tmp;
-        u32 val32;
-
-        list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
-                if (tmp_timer == timer)
-                        list_del(&timer->list);
-
-        if (list_empty(&active_timers)) {
-                val32 = readl(the_transceiver->regs + CI_OTGSC);
-                writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
-        }
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
-        struct langwell_otg_timer *tmp_timer, *del_tmp;
-        int expired = 0;
-
-        list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
-                tmp_timer->count--;
-                /* check if timer expires */
-                if (!tmp_timer->count) {
-                        list_del(&tmp_timer->list);
-                        tmp_timer->function(tmp_timer->data);
-                        expired = 1;
-                }
-        }
-
-        if (list_empty(&active_timers)) {
-                otg_dbg("tick timer: disable 1ms int\n");
-                *int_sts = *int_sts & ~OTGSC_1MSE;
-        }
-        return expired;
-}
-
-static void reset_otg(void)
-{
-        u32     val;
-        int     delay_time = 1000;
-
-        otg_dbg("reseting OTG controller ...\n");
-        val = readl(the_transceiver->regs + CI_USBCMD);
-        writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
-        do {
-                udelay(100);
-                if (!delay_time--)
-                        otg_dbg("reset timeout\n");
-                val = readl(the_transceiver->regs + CI_USBCMD);
-                val &= USBCMD_RST;
-        } while (val != 0);
-        otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
-        u32     val;
-
-        reset_otg();
-        val = readl(the_transceiver->regs + CI_USBMODE);
-        val = (val & (~USBMODE_CM)) | USBMODE_HOST;
-        writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
-        u32     val;
-
-        reset_otg();
-        val = readl(the_transceiver->regs + CI_USBMODE);
-        val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
-        writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
-        struct langwell_otg     *langwell = the_transceiver;
-        u32                     val32;
-
-        /* read OTGSC after reset */
-        val32 = readl(langwell->regs + CI_OTGSC);
-        otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
-        /* set init state */
-        if (val32 & OTGSC_ID) {
-                langwell->hsm.id = 1;
-                langwell->otg.default_a = 0;
-                set_client_mode();
-                langwell->otg.state = OTG_STATE_B_IDLE;
-                langwell_otg_drv_vbus(0);
-        } else {
-                langwell->hsm.id = 0;
-                langwell->otg.default_a = 1;
-                set_host_mode();
-                langwell->otg.state = OTG_STATE_A_IDLE;
-        }
-
-        /* set session indicator */
-        if (val32 & OTGSC_BSE)
-                langwell->hsm.b_sess_end = 1;
-        if (val32 & OTGSC_BSV)
-                langwell->hsm.b_sess_vld = 1;
-        if (val32 & OTGSC_ASV)
-                langwell->hsm.a_sess_vld = 1;
-        if (val32 & OTGSC_AVV)
-                langwell->hsm.a_vbus_vld = 1;
-
-        /* defautly power the bus */
-        langwell->hsm.a_bus_req = 1;
-        langwell->hsm.a_bus_drop = 0;
-        /* defautly don't request bus as B device */
-        langwell->hsm.b_bus_req = 0;
-        /* no system error */
-        langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
-        void __iomem    *reg_base = _dev;
-        u32     val;
-        u32     int_mask = 0;
-
-        val = readl(reg_base + CI_USBMODE);
-        if ((val & USBMODE_CM) != USBMODE_DEVICE)
-                return IRQ_NONE;
-
-        val = readl(reg_base + CI_USBSTS);
-        int_mask = val & INTR_DUMMY_MASK;
-
-        if (int_mask == 0)
-                return IRQ_NONE;
-
-        /* clear hsm.b_conn here since host driver can't detect it
-        *  otg_dummy_irq called means B-disconnect happened.
-        */
-        if (the_transceiver->hsm.b_conn) {
-                the_transceiver->hsm.b_conn = 0;
-                if (spin_trylock(&the_transceiver->wq_lock)) {
-                        queue_work(the_transceiver->qwork,
-                                &the_transceiver->work);
-                        spin_unlock(&the_transceiver->wq_lock);
-                }
-        }
-        /* Clear interrupts */
-        writel(int_mask, reg_base + CI_USBSTS);
-        return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
-        struct  langwell_otg *langwell = _dev;
-        u32     int_sts, int_en;
-        u32     int_mask = 0;
-        int     flag = 0;
-
-        int_sts = readl(langwell->regs + CI_OTGSC);
-        int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
-        int_mask = int_sts & int_en;
-        if (int_mask == 0)
-                return IRQ_NONE;
-
-        if (int_mask & OTGSC_IDIS) {
-                otg_dbg("%s: id change int\n", __func__);
-                langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
-                flag = 1;
-        }
-        if (int_mask & OTGSC_DPIS) {
-                otg_dbg("%s: data pulse int\n", __func__);
-                langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
-                flag = 1;
-        }
-        if (int_mask & OTGSC_BSEIS) {
-                otg_dbg("%s: b session end int\n", __func__);
-                langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
-                flag = 1;
-        }
-        if (int_mask & OTGSC_BSVIS) {
-                otg_dbg("%s: b session valid int\n", __func__);
-                langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
-                flag = 1;
-        }
-        if (int_mask & OTGSC_ASVIS) {
-                otg_dbg("%s: a session valid int\n", __func__);
-                langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
-                flag = 1;
-        }
-        if (int_mask & OTGSC_AVVIS) {
-                otg_dbg("%s: a vbus valid int\n", __func__);
-                langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
-                flag = 1;
-        }
-
-        if (int_mask & OTGSC_1MSS) {
-                /* need to schedule otg_work if any timer is expired */
-                if (langwell_otg_tick_timer(&int_sts))
-                        flag = 1;
-        }
-
-        writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
-                        langwell->regs + CI_OTGSC);
-        if (flag)
-                queue_work(langwell->qwork, &langwell->work);
-
-        return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
-        struct langwell_otg *langwell = container_of(work,
-                                        struct langwell_otg, work);
-        int     retval;
-
-        otg_dbg("%s: old state = %s\n", __func__,
-                        state_string(langwell->otg.state));
-
-        switch (langwell->otg.state) {
-        case OTG_STATE_UNDEFINED:
-        case OTG_STATE_B_IDLE:
-                if (!langwell->hsm.id) {
-                        langwell_otg_del_timer(b_srp_res_tmr);
-                        langwell->otg.default_a = 1;
-                        langwell->hsm.a_srp_det = 0;
-
-                        langwell_otg_chrg_vbus(0);
-                        langwell_otg_drv_vbus(0);
-
-                        set_host_mode();
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.b_srp_res_tmout) {
-                        langwell->hsm.b_srp_res_tmout = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        langwell_otg_nsf_msg(6);
-                } else if (langwell->hsm.b_sess_vld) {
-                        langwell_otg_del_timer(b_srp_res_tmr);
-                        langwell->hsm.b_sess_end = 0;
-                        langwell->hsm.a_bus_suspend = 0;
-
-                        langwell_otg_chrg_vbus(0);
-                        if (langwell->client_ops) {
-                                langwell->client_ops->resume(langwell->pdev);
-                                langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-                        } else
-                                otg_dbg("client driver not loaded.\n");
-
-                } else if (langwell->hsm.b_bus_req &&
-                                (langwell->hsm.b_sess_end)) {
-                        /* workaround for b_se0_srp detection */
-                        retval = langwell_otg_check_se0_srp(0);
-                        if (retval) {
-                                langwell->hsm.b_bus_req = 0;
-                                otg_dbg("LS is not SE0, try again later\n");
-                        } else {
-                                /* Start SRP */
-                                langwell_otg_start_srp(&langwell->otg);
-                                langwell_otg_add_timer(b_srp_res_tmr);
-                        }
-                }
-                break;
-        case OTG_STATE_B_SRP_INIT:
-                if (!langwell->hsm.id) {
-                        langwell->otg.default_a = 1;
-                        langwell->hsm.a_srp_det = 0;
-
-                        langwell_otg_drv_vbus(0);
-                        langwell_otg_chrg_vbus(0);
-
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.b_sess_vld) {
-                        langwell_otg_chrg_vbus(0);
-                        if (langwell->client_ops) {
-                                langwell->client_ops->resume(langwell->pdev);
-                                langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-                        } else
-                                otg_dbg("client driver not loaded.\n");
-                }
-                break;
-        case OTG_STATE_B_PERIPHERAL:
-                if (!langwell->hsm.id) {
-                        langwell->otg.default_a = 1;
-                        langwell->hsm.a_srp_det = 0;
-
-                        langwell_otg_drv_vbus(0);
-                        langwell_otg_chrg_vbus(0);
-                        set_host_mode();
-
-                        if (langwell->client_ops) {
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        } else
-                                otg_dbg("client driver has been removed.\n");
-
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.b_sess_vld) {
-                        langwell->hsm.b_hnp_enable = 0;
-
-                        if (langwell->client_ops) {
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        } else
-                                otg_dbg("client driver has been removed.\n");
-
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
-                        && langwell->hsm.a_bus_suspend) {
-
-                        if (langwell->client_ops) {
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        } else
-                                otg_dbg("client driver has been removed.\n");
-
-                        langwell_otg_HAAR(1);
-                        langwell->hsm.a_conn = 0;
-
-                        if (langwell->host_ops) {
-                                langwell->host_ops->probe(langwell->pdev,
-                                        langwell->host_ops->id_table);
-                                langwell->otg.state = OTG_STATE_B_WAIT_ACON;
-                        } else
-                                otg_dbg("host driver not loaded.\n");
-
-                        langwell->hsm.a_bus_resume = 0;
-                        langwell->hsm.b_ase0_brst_tmout = 0;
-                        langwell_otg_add_timer(b_ase0_brst_tmr);
-                }
-                break;
-
-        case OTG_STATE_B_WAIT_ACON:
-                if (!langwell->hsm.id) {
-                        langwell_otg_del_timer(b_ase0_brst_tmr);
-                        langwell->otg.default_a = 1;
-                        langwell->hsm.a_srp_det = 0;
-
-                        langwell_otg_drv_vbus(0);
-                        langwell_otg_chrg_vbus(0);
-                        set_host_mode();
-
-                        langwell_otg_HAAR(0);
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.b_sess_vld) {
-                        langwell_otg_del_timer(b_ase0_brst_tmr);
-                        langwell->hsm.b_hnp_enable = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        langwell_otg_chrg_vbus(0);
-                        langwell_otg_HAAR(0);
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                } else if (langwell->hsm.a_conn) {
-                        langwell_otg_del_timer(b_ase0_brst_tmr);
-                        langwell_otg_HAAR(0);
-                        langwell->otg.state = OTG_STATE_B_HOST;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_bus_resume ||
-                                langwell->hsm.b_ase0_brst_tmout) {
-                        langwell_otg_del_timer(b_ase0_brst_tmr);
-                        langwell_otg_HAAR(0);
-                        langwell_otg_nsf_msg(7);
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-
-                        langwell->hsm.a_bus_suspend = 0;
-                        langwell->hsm.b_bus_req = 0;
-
-                        if (langwell->client_ops)
-                                langwell->client_ops->resume(langwell->pdev);
-                        else
-                                otg_dbg("client driver not loaded.\n");
-
-                        langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-                }
-                break;
-
-        case OTG_STATE_B_HOST:
-                if (!langwell->hsm.id) {
-                        langwell->otg.default_a = 1;
-                        langwell->hsm.a_srp_det = 0;
-
-                        langwell_otg_drv_vbus(0);
-                        langwell_otg_chrg_vbus(0);
-                        set_host_mode();
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.b_sess_vld) {
-                        langwell->hsm.b_hnp_enable = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        langwell_otg_chrg_vbus(0);
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                } else if ((!langwell->hsm.b_bus_req) ||
-                                (!langwell->hsm.a_conn)) {
-                        langwell->hsm.b_bus_req = 0;
-                        langwell_otg_loc_sof(0);
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-
-                        langwell->hsm.a_bus_suspend = 0;
-
-                        if (langwell->client_ops)
-                                langwell->client_ops->resume(langwell->pdev);
-                        else
-                                otg_dbg("client driver not loaded.\n");
-
-                        langwell->otg.state = OTG_STATE_B_PERIPHERAL;
-                }
-                break;
-
-        case OTG_STATE_A_IDLE:
-                langwell->otg.default_a = 1;
-                if (langwell->hsm.id) {
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        langwell_otg_drv_vbus(0);
-                        langwell_otg_chrg_vbus(0);
-
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_sess_vld) {
-                        langwell_otg_drv_vbus(1);
-                        langwell->hsm.a_srp_det = 1;
-                        langwell->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.a_bus_drop &&
-                        (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
-                        langwell_otg_drv_vbus(1);
-                        langwell->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-                        queue_work(langwell->qwork, &langwell->work);
-                }
-                break;
-        case OTG_STATE_A_WAIT_VRISE:
-                if (langwell->hsm.id) {
-                        langwell_otg_del_timer(a_wait_vrise_tmr);
-                        langwell->hsm.b_bus_req = 0;
-                        langwell->otg.default_a = 0;
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                } else if (langwell->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(a_wait_vrise_tmr);
-                        if (langwell->host_ops)
-                                langwell->host_ops->probe(langwell->pdev,
-                                                langwell->host_ops->id_table);
-                        else
-                                otg_dbg("host driver not loaded.\n");
-                        langwell->hsm.b_conn = 0;
-                        langwell->hsm.a_set_b_hnp_en = 0;
-                        langwell->hsm.a_wait_bcon_tmout = 0;
-                        langwell_otg_add_timer(a_wait_bcon_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-                } else if (langwell->hsm.a_wait_vrise_tmout) {
-                        if (langwell->hsm.a_vbus_vld) {
-                                if (langwell->host_ops)
-                                        langwell->host_ops->probe(
-                                                langwell->pdev,
-                                                langwell->host_ops->id_table);
-                                else
-                                        otg_dbg("host driver not loaded.\n");
-                                langwell->hsm.b_conn = 0;
-                                langwell->hsm.a_set_b_hnp_en = 0;
-                                langwell->hsm.a_wait_bcon_tmout = 0;
-                                langwell_otg_add_timer(a_wait_bcon_tmr);
-                                langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-                        } else {
-                                langwell_otg_drv_vbus(0);
-                                langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-                        }
-                }
-                break;
-        case OTG_STATE_A_WAIT_BCON:
-                if (langwell->hsm.id) {
-                        langwell_otg_del_timer(a_wait_bcon_tmr);
-
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(a_wait_bcon_tmr);
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (langwell->hsm.a_bus_drop ||
-                                (langwell->hsm.a_wait_bcon_tmout &&
-                                !langwell->hsm.a_bus_req)) {
-                        langwell_otg_del_timer(a_wait_bcon_tmr);
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (langwell->hsm.b_conn) {
-                        langwell_otg_del_timer(a_wait_bcon_tmr);
-
-                        langwell->hsm.a_suspend_req = 0;
-                        langwell->otg.state = OTG_STATE_A_HOST;
-                        if (!langwell->hsm.a_bus_req &&
-                                langwell->hsm.a_set_b_hnp_en) {
-                                /* It is not safe enough to do a fast
-                                 * transistion from A_WAIT_BCON to
-                                 * A_SUSPEND */
-                                msleep(10000);
-                                if (langwell->hsm.a_bus_req)
-                                        break;
-
-                                if (request_irq(langwell->pdev->irq,
-                                        otg_dummy_irq, IRQF_SHARED,
-                                        driver_name, langwell->regs) != 0) {
-                                        otg_dbg("request interrupt %d fail\n",
-                                        langwell->pdev->irq);
-                                }
-
-                                langwell_otg_HABA(1);
-                                langwell->hsm.b_bus_resume = 0;
-                                langwell->hsm.a_aidl_bdis_tmout = 0;
-                                langwell_otg_add_timer(a_aidl_bdis_tmr);
-
-                                langwell_otg_loc_sof(0);
-                                langwell->otg.state = OTG_STATE_A_SUSPEND;
-                        } else if (!langwell->hsm.a_bus_req &&
-                                !langwell->hsm.a_set_b_hnp_en) {
-                                struct pci_dev *pdev = langwell->pdev;
-                                if (langwell->host_ops)
-                                        langwell->host_ops->remove(pdev);
-                                else
-                                        otg_dbg("host driver removed.\n");
-                                langwell_otg_drv_vbus(0);
-                                langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                        }
-                }
-                break;
-        case OTG_STATE_A_HOST:
-                if (langwell->hsm.id) {
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_bus_drop ||
-                (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (!langwell->hsm.a_vbus_vld) {
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (langwell->hsm.a_set_b_hnp_en
-                                && !langwell->hsm.a_bus_req) {
-                        /* Set HABA to enable hardware assistance to signal
-                         *  A-connect after receiver B-disconnect. Hardware
-                         *  will then set client mode and enable URE, SLE and
-                         *  PCE after the assistance. otg_dummy_irq is used to
-                         *  clean these ints when client driver is not resumed.
-                         */
-                        if (request_irq(langwell->pdev->irq,
-                                otg_dummy_irq, IRQF_SHARED, driver_name,
-                                langwell->regs) != 0) {
-                                otg_dbg("request interrupt %d failed\n",
-                                                langwell->pdev->irq);
-                        }
-
-                        /* set HABA */
-                        langwell_otg_HABA(1);
-                        langwell->hsm.b_bus_resume = 0;
-                        langwell->hsm.a_aidl_bdis_tmout = 0;
-                        langwell_otg_add_timer(a_aidl_bdis_tmr);
-                        langwell_otg_loc_sof(0);
-                        langwell->otg.state = OTG_STATE_A_SUSPEND;
-                } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
-                        langwell->hsm.a_wait_bcon_tmout = 0;
-                        langwell->hsm.a_set_b_hnp_en = 0;
-                        langwell_otg_add_timer(a_wait_bcon_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-                }
-                break;
-        case OTG_STATE_A_SUSPEND:
-                if (langwell->hsm.id) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(langwell->pdev->irq, langwell->regs);
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_bus_req ||
-                                langwell->hsm.b_bus_resume) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(langwell->pdev->irq, langwell->regs);
-                        langwell->hsm.a_suspend_req = 0;
-                        langwell_otg_loc_sof(1);
-                        langwell->otg.state = OTG_STATE_A_HOST;
-                } else if (langwell->hsm.a_aidl_bdis_tmout ||
-                                langwell->hsm.a_bus_drop) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(langwell->pdev->irq, langwell->regs);
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (!langwell->hsm.b_conn &&
-                                langwell->hsm.a_set_b_hnp_en) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(langwell->pdev->irq, langwell->regs);
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-
-                        langwell->hsm.b_bus_suspend = 0;
-                        langwell->hsm.b_bus_suspend_vld = 0;
-                        langwell->hsm.b_bus_suspend_tmout = 0;
-
-                        /* msleep(200); */
-                        if (langwell->client_ops)
-                                langwell->client_ops->resume(langwell->pdev);
-                        else
-                                otg_dbg("client driver not loaded.\n");
-
-                        langwell_otg_add_timer(b_bus_suspend_tmr);
-                        langwell->otg.state = OTG_STATE_A_PERIPHERAL;
-                        break;
-                } else if (!langwell->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(a_aidl_bdis_tmr);
-                        langwell_otg_HABA(0);
-                        free_irq(langwell->pdev->irq, langwell->regs);
-                        if (langwell->host_ops)
-                                langwell->host_ops->remove(langwell->pdev);
-                        else
-                                otg_dbg("host driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-                }
-                break;
-        case OTG_STATE_A_PERIPHERAL:
-                if (langwell->hsm.id) {
-                        langwell_otg_del_timer(b_bus_suspend_tmr);
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.b_bus_req = 0;
-                        if (langwell->client_ops)
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        else
-                                otg_dbg("client driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (!langwell->hsm.a_vbus_vld) {
-                        langwell_otg_del_timer(b_bus_suspend_tmr);
-                        if (langwell->client_ops)
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        else
-                                otg_dbg("client driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_VBUS_ERR;
-                } else if (langwell->hsm.a_bus_drop) {
-                        langwell_otg_del_timer(b_bus_suspend_tmr);
-                        if (langwell->client_ops)
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        else
-                                otg_dbg("client driver has been removed.\n");
-                        langwell_otg_drv_vbus(0);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                } else if (langwell->hsm.b_bus_suspend) {
-                        langwell_otg_del_timer(b_bus_suspend_tmr);
-                        if (langwell->client_ops)
-                                langwell->client_ops->suspend(langwell->pdev,
-                                        PMSG_FREEZE);
-                        else
-                                otg_dbg("client driver has been removed.\n");
-
-                        if (langwell->host_ops)
-                                langwell->host_ops->probe(langwell->pdev,
-                                                langwell->host_ops->id_table);
-                        else
-                                otg_dbg("host driver not loaded.\n");
-                        langwell->hsm.a_set_b_hnp_en = 0;
-                        langwell->hsm.a_wait_bcon_tmout = 0;
-                        langwell_otg_add_timer(a_wait_bcon_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-                } else if (langwell->hsm.b_bus_suspend_tmout) {
-                        u32     val;
-                        val = readl(langwell->regs + CI_PORTSC1);
-                        if (!(val & PORTSC_SUSP))
-                                break;
-                        if (langwell->client_ops)
-                                langwell->client_ops->suspend(langwell->pdev,
-                                                PMSG_FREEZE);
-                        else
-                                otg_dbg("client driver has been removed.\n");
-                        if (langwell->host_ops)
-                                langwell->host_ops->probe(langwell->pdev,
-                                                langwell->host_ops->id_table);
-                        else
-                                otg_dbg("host driver not loaded.\n");
-                        langwell->hsm.a_set_b_hnp_en = 0;
-                        langwell->hsm.a_wait_bcon_tmout = 0;
-                        langwell_otg_add_timer(a_wait_bcon_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_BCON;
-                }
-                break;
-        case OTG_STATE_A_VBUS_ERR:
-                if (langwell->hsm.id) {
-                        langwell->otg.default_a = 0;
-                        langwell->hsm.a_clr_err = 0;
-                        langwell->hsm.a_srp_det = 0;
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_clr_err) {
-                        langwell->hsm.a_clr_err = 0;
-                        langwell->hsm.a_srp_det = 0;
-                        reset_otg();
-                        init_hsm();
-                        if (langwell->otg.state == OTG_STATE_A_IDLE)
-                                queue_work(langwell->qwork, &langwell->work);
-                }
-                break;
-        case OTG_STATE_A_WAIT_VFALL:
-                if (langwell->hsm.id) {
-                        langwell->otg.default_a = 0;
-                        langwell->otg.state = OTG_STATE_B_IDLE;
-                        queue_work(langwell->qwork, &langwell->work);
-                } else if (langwell->hsm.a_bus_req) {
-                        langwell_otg_drv_vbus(1);
-                        langwell->hsm.a_wait_vrise_tmout = 0;
-                        langwell_otg_add_timer(a_wait_vrise_tmr);
-                        langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
-                } else if (!langwell->hsm.a_sess_vld) {
-                        langwell->hsm.a_srp_det = 0;
-                        langwell_otg_drv_vbus(0);
-                        set_host_mode();
-                        langwell->otg.state = OTG_STATE_A_IDLE;
-                }
-                break;
-        default:
-                ;
-        }
-
-        otg_dbg("%s: new state = %s\n", __func__,
-                        state_string(langwell->otg.state));
-}
-
-        static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg *langwell;
-        char *next;
-        unsigned size;
-        unsigned t;
-
-        langwell = the_transceiver;
-        next = buf;
-        size = PAGE_SIZE;
-
-        t = scnprintf(next, size,
-                "\n"
-                "USBCMD = 0x%08x \n"
-                "USBSTS = 0x%08x \n"
-                "USBINTR = 0x%08x \n"
-                "ASYNCLISTADDR = 0x%08x \n"
-                "PORTSC1 = 0x%08x \n"
-                "HOSTPC1 = 0x%08x \n"
-                "OTGSC = 0x%08x \n"
-                "USBMODE = 0x%08x \n",
-                readl(langwell->regs + 0x30),
-                readl(langwell->regs + 0x34),
-                readl(langwell->regs + 0x38),
-                readl(langwell->regs + 0x48),
-                readl(langwell->regs + 0x74),
-                readl(langwell->regs + 0xb4),
-                readl(langwell->regs + 0xf4),
-                readl(langwell->regs + 0xf8)
-                );
-        size -= t;
-        next += t;
-
-        return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg *langwell;
-        char *next;
-        unsigned size;
-        unsigned t;
-
-        langwell = the_transceiver;
-        next = buf;
-        size = PAGE_SIZE;
-
-        t = scnprintf(next, size,
-                "\n"
-                "current state = %s\n"
-                "a_bus_resume = \t%d\n"
-                "a_bus_suspend = \t%d\n"
-                "a_conn = \t%d\n"
-                "a_sess_vld = \t%d\n"
-                "a_srp_det = \t%d\n"
-                "a_vbus_vld = \t%d\n"
-                "b_bus_resume = \t%d\n"
-                "b_bus_suspend = \t%d\n"
-                "b_conn = \t%d\n"
-                "b_se0_srp = \t%d\n"
-                "b_sess_end = \t%d\n"
-                "b_sess_vld = \t%d\n"
-                "id = \t%d\n"
-                "a_set_b_hnp_en = \t%d\n"
-                "b_srp_done = \t%d\n"
-                "b_hnp_enable = \t%d\n"
-                "a_wait_vrise_tmout = \t%d\n"
-                "a_wait_bcon_tmout = \t%d\n"
-                "a_aidl_bdis_tmout = \t%d\n"
-                "b_ase0_brst_tmout = \t%d\n"
-                "a_bus_drop = \t%d\n"
-                "a_bus_req = \t%d\n"
-                "a_clr_err = \t%d\n"
-                "a_suspend_req = \t%d\n"
-                "b_bus_req = \t%d\n"
-                "b_bus_suspend_tmout = \t%d\n"
-                "b_bus_suspend_vld = \t%d\n",
-                state_string(langwell->otg.state),
-                langwell->hsm.a_bus_resume,
-                langwell->hsm.a_bus_suspend,
-                langwell->hsm.a_conn,
-                langwell->hsm.a_sess_vld,
-                langwell->hsm.a_srp_det,
-                langwell->hsm.a_vbus_vld,
-                langwell->hsm.b_bus_resume,
-                langwell->hsm.b_bus_suspend,
-                langwell->hsm.b_conn,
-                langwell->hsm.b_se0_srp,
-                langwell->hsm.b_sess_end,
-                langwell->hsm.b_sess_vld,
-                langwell->hsm.id,
-                langwell->hsm.a_set_b_hnp_en,
-                langwell->hsm.b_srp_done,
-                langwell->hsm.b_hnp_enable,
-                langwell->hsm.a_wait_vrise_tmout,
-                langwell->hsm.a_wait_bcon_tmout,
-                langwell->hsm.a_aidl_bdis_tmout,
-                langwell->hsm.b_ase0_brst_tmout,
-                langwell->hsm.a_bus_drop,
-                langwell->hsm.a_bus_req,
-                langwell->hsm.a_clr_err,
-                langwell->hsm.a_suspend_req,
-                langwell->hsm.b_bus_req,
-                langwell->hsm.b_bus_suspend_tmout,
-                langwell->hsm.b_bus_suspend_vld
-                );
-        size -= t;
-        next += t;
-
-        return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg *langwell;
-        char *next;
-        unsigned size;
-        unsigned t;
-
-        langwell =  the_transceiver;
-        next = buf;
-        size = PAGE_SIZE;
-
-        t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
-        size -= t;
-        next += t;
-
-        return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg *langwell;
-        langwell = the_transceiver;
-        if (!langwell->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-
-        if (buf[0] == '0') {
-                langwell->hsm.a_bus_req = 0;
-                otg_dbg("a_bus_req = 0\n");
-        } else if (buf[0] == '1') {
-                /* If a_bus_drop is TRUE, a_bus_req can't be set */
-                if (langwell->hsm.a_bus_drop)
-                        return -1;
-                langwell->hsm.a_bus_req = 1;
-                otg_dbg("a_bus_req = 1\n");
-        }
-        if (spin_trylock(&langwell->wq_lock)) {
-                queue_work(langwell->qwork, &langwell->work);
-                spin_unlock(&langwell->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg *langwell;
-        char *next;
-        unsigned size;
-        unsigned t;
-
-        langwell =  the_transceiver;
-        next = buf;
-        size = PAGE_SIZE;
-
-        t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
-        size -= t;
-        next += t;
-
-        return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg *langwell;
-        langwell = the_transceiver;
-        if (!langwell->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-
-        if (buf[0] == '0') {
-                langwell->hsm.a_bus_drop = 0;
-                otg_dbg("a_bus_drop = 0\n");
-        } else if (buf[0] == '1') {
-                langwell->hsm.a_bus_drop = 1;
-                langwell->hsm.a_bus_req = 0;
-                otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
-        }
-        if (spin_trylock(&langwell->wq_lock)) {
-                queue_work(langwell->qwork, &langwell->work);
-                spin_unlock(&langwell->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-        get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
-        struct langwell_otg *langwell;
-        char *next;
-        unsigned size;
-        unsigned t;
-
-        langwell =  the_transceiver;
-        next = buf;
-        size = PAGE_SIZE;
-
-        t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
-        size -= t;
-        next += t;
-
-        return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg *langwell;
-        langwell = the_transceiver;
-
-        if (langwell->otg.default_a)
-                return -1;
-
-        if (count > 2)
-                return -1;
-
-        if (buf[0] == '0') {
-                langwell->hsm.b_bus_req = 0;
-                otg_dbg("b_bus_req = 0\n");
-        } else if (buf[0] == '1') {
-                langwell->hsm.b_bus_req = 1;
-                otg_dbg("b_bus_req = 1\n");
-        }
-        if (spin_trylock(&langwell->wq_lock)) {
-                queue_work(langwell->qwork, &langwell->work);
-                spin_unlock(&langwell->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
-                const char *buf, size_t count)
-{
-        struct langwell_otg *langwell;
-        langwell = the_transceiver;
-
-        if (!langwell->otg.default_a)
-                return -1;
-        if (count > 2)
-                return -1;
-
-        if (buf[0] == '1') {
-                langwell->hsm.a_clr_err = 1;
-                otg_dbg("a_clr_err = 1\n");
-        }
-        if (spin_trylock(&langwell->wq_lock)) {
-                queue_work(langwell->qwork, &langwell->work);
-                spin_unlock(&langwell->wq_lock);
-        }
-        return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
-        &dev_attr_a_bus_req.attr,
-        &dev_attr_a_bus_drop.attr,
-        &dev_attr_b_bus_req.attr,
-        &dev_attr_a_clr_err.attr,
-        NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
-        .name = "inputs",
-        .attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
-        int     ret = 0;
-
-        the_transceiver->host_ops = host_driver;
-        queue_work(the_transceiver->qwork, &the_transceiver->work);
-        otg_dbg("host controller driver is registered\n");
-
-        return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
-        if (the_transceiver->host_ops)
-                the_transceiver->host_ops->remove(the_transceiver->pdev);
-        the_transceiver->host_ops = NULL;
-        the_transceiver->hsm.a_bus_drop = 1;
-        queue_work(the_transceiver->qwork, &the_transceiver->work);
-        otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
-        int     ret = 0;
-
-        if (client_driver)
-                ret = client_driver->probe(the_transceiver->pdev,
-                                client_driver->id_table);
-        if (!ret) {
-                the_transceiver->client_ops = client_driver;
-                queue_work(the_transceiver->qwork, &the_transceiver->work);
-                otg_dbg("client controller driver is registered\n");
-        }
-
-        return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
-        if (the_transceiver->client_ops)
-                the_transceiver->client_ops->remove(the_transceiver->pdev);
-        the_transceiver->client_ops = NULL;
-        the_transceiver->hsm.b_bus_req = 0;
-        queue_work(the_transceiver->qwork, &the_transceiver->work);
-        otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
-                const struct pci_device_id *id)
-{
-        unsigned long           resource, len;
-        void __iomem            *base = NULL;
-        int                     retval;
-        u32                     val32;
-        struct langwell_otg     *langwell;
-        char                    qname[] = "langwell_otg_queue";
-
-        retval = 0;
-        otg_dbg("\notg controller is detected.\n");
-        if (pci_enable_device(pdev) < 0) {
-                retval = -ENODEV;
-                goto done;
-        }
-
-        langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
-        if (langwell == NULL) {
-                retval = -ENOMEM;
-                goto done;
-        }
-        the_transceiver = langwell;
-
-        /* control register: BAR 0 */
-        resource = pci_resource_start(pdev, 0);
-        len = pci_resource_len(pdev, 0);
-        if (!request_mem_region(resource, len, driver_name)) {
-                retval = -EBUSY;
-                goto err;
-        }
-        langwell->region = 1;
-
-        base = ioremap_nocache(resource, len);
-        if (base == NULL) {
-                retval = -EFAULT;
-                goto err;
-        }
-        langwell->regs = base;
-
-        if (!pdev->irq) {
-                otg_dbg("No IRQ.\n");
-                retval = -ENODEV;
-                goto err;
-        }
-
-        langwell->qwork = create_workqueue(qname);
-        if (!langwell->qwork) {
-                otg_dbg("cannot create workqueue %s\n", qname);
-                retval = -ENOMEM;
-                goto err;
-        }
-        INIT_WORK(&langwell->work, langwell_otg_work);
-
-        /* OTG common part */
-        langwell->pdev = pdev;
-        langwell->otg.dev = &pdev->dev;
-        langwell->otg.label = driver_name;
-        langwell->otg.set_host = langwell_otg_set_host;
-        langwell->otg.set_peripheral = langwell_otg_set_peripheral;
-        langwell->otg.set_power = langwell_otg_set_power;
-        langwell->otg.start_srp = langwell_otg_start_srp;
-        langwell->otg.state = OTG_STATE_UNDEFINED;
-        if (otg_set_transceiver(&langwell->otg)) {
-                otg_dbg("can't set transceiver\n");
-                retval = -EBUSY;
-                goto err;
-        }
-
-        reset_otg();
-        init_hsm();
-
-        spin_lock_init(&langwell->lock);
-        spin_lock_init(&langwell->wq_lock);
-        INIT_LIST_HEAD(&active_timers);
-        langwell_otg_init_timers(&langwell->hsm);
-
-        if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-                                driver_name, langwell) != 0) {
-                otg_dbg("request interrupt %d failed\n", pdev->irq);
-                retval = -EBUSY;
-                goto err;
-        }
-
-        /* enable OTGSC int */
-        val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
-                OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
-        writel(val32, langwell->regs + CI_OTGSC);
-
-        retval = device_create_file(&pdev->dev, &dev_attr_registers);
-        if (retval < 0) {
-                otg_dbg("Can't register sysfs attribute: %d\n", retval);
-                goto err;
-        }
-
-        retval = device_create_file(&pdev->dev, &dev_attr_hsm);
-        if (retval < 0) {
-                otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
-                goto err;
-        }
-
-        retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
-        if (retval < 0) {
-                otg_dbg("Can't register sysfs attr group: %d\n", retval);
-                goto err;
-        }
-
-        if (langwell->otg.state == OTG_STATE_A_IDLE)
-                queue_work(langwell->qwork, &langwell->work);
-
-        return 0;
-
-err:
-        if (the_transceiver)
-                langwell_otg_remove(pdev);
-done:
-        return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
-        struct langwell_otg *langwell;
-
-        langwell = the_transceiver;
-
-        if (langwell->qwork) {
-                flush_workqueue(langwell->qwork);
-                destroy_workqueue(langwell->qwork);
-        }
-        langwell_otg_free_timers();
-
-        /* disable OTGSC interrupt as OTGSC doesn't change in reset */
-        writel(0, langwell->regs + CI_OTGSC);
-
-        if (pdev->irq)
-                free_irq(pdev->irq, langwell);
-        if (langwell->regs)
-                iounmap(langwell->regs);
-        if (langwell->region)
-                release_mem_region(pci_resource_start(pdev, 0),
-                                pci_resource_len(pdev, 0));
-
-        otg_set_transceiver(NULL);
-        pci_disable_device(pdev);
-        sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
-        device_remove_file(&pdev->dev, &dev_attr_hsm);
-        device_remove_file(&pdev->dev, &dev_attr_registers);
-        kfree(langwell);
-        langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
-        pci_save_state(pdev);
-        pci_set_power_state(pdev, PCI_D3hot);
-        langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
-        int     ret = 0;
-        struct langwell_otg *langwell;
-
-        langwell = the_transceiver;
-
-        /* Disbale OTG interrupts */
-        langwell_otg_intr(0);
-
-        if (pdev->irq)
-                free_irq(pdev->irq, langwell);
-
-        /* Prevent more otg_work */
-        flush_workqueue(langwell->qwork);
-        spin_lock(&langwell->wq_lock);
-
-        /* start actions */
-        switch (langwell->otg.state) {
-        case OTG_STATE_A_IDLE:
-        case OTG_STATE_B_IDLE:
-        case OTG_STATE_A_WAIT_VFALL:
-        case OTG_STATE_A_VBUS_ERR:
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_WAIT_VRISE:
-                langwell_otg_del_timer(a_wait_vrise_tmr);
-                langwell->hsm.a_srp_det = 0;
-                langwell_otg_drv_vbus(0);
-                langwell->otg.state = OTG_STATE_A_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        case OTG_STATE_A_WAIT_BCON:
-                langwell_otg_del_timer(a_wait_bcon_tmr);
-                if (langwell->host_ops)
-                        ret = langwell->host_ops->suspend(pdev, message);
-                langwell_otg_drv_vbus(0);
-                break;
-        case OTG_STATE_A_HOST:
-                if (langwell->host_ops)
-                        ret = langwell->host_ops->suspend(pdev, message);
-                langwell_otg_drv_vbus(0);
-                langwell_otg_phy_low_power(1);
-                break;
-        case OTG_STATE_A_SUSPEND:
-                langwell_otg_del_timer(a_aidl_bdis_tmr);
-                langwell_otg_HABA(0);
-                if (langwell->host_ops)
-                        langwell->host_ops->remove(pdev);
-                else
-                        otg_dbg("host driver has been removed.\n");
-                langwell_otg_drv_vbus(0);
-                transceiver_suspend(pdev);
-                langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                break;
-        case OTG_STATE_A_PERIPHERAL:
-                if (langwell->client_ops)
-                        ret = langwell->client_ops->suspend(pdev, message);
-                else
-                        otg_dbg("client driver has been removed.\n");
-                langwell_otg_drv_vbus(0);
-                transceiver_suspend(pdev);
-                langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
-                break;
-        case OTG_STATE_B_HOST:
-                if (langwell->host_ops)
-                        langwell->host_ops->remove(pdev);
-                else
-                        otg_dbg("host driver has been removed.\n");
-                langwell->hsm.b_bus_req = 0;
-                transceiver_suspend(pdev);
-                langwell->otg.state = OTG_STATE_B_IDLE;
-                break;
-        case OTG_STATE_B_PERIPHERAL:
-                if (langwell->client_ops)
-                        ret = langwell->client_ops->suspend(pdev, message);
-                else
-                        otg_dbg("client driver has been removed.\n");
-                break;
-        case OTG_STATE_B_WAIT_ACON:
-                langwell_otg_del_timer(b_ase0_brst_tmr);
-                langwell_otg_HAAR(0);
-                if (langwell->host_ops)
-                        langwell->host_ops->remove(pdev);
-                else
-                        otg_dbg("host driver has been removed.\n");
-                langwell->hsm.b_bus_req = 0;
-                langwell->otg.state = OTG_STATE_B_IDLE;
-                transceiver_suspend(pdev);
-                break;
-        default:
-                otg_dbg("error state before suspend\n ");
-                break;
-        }
-        spin_unlock(&langwell->wq_lock);
-
-        return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
-        pci_restore_state(pdev);
-        pci_set_power_state(pdev, PCI_D0);
-        langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
-        int     ret = 0;
-        struct langwell_otg *langwell;
-
-        langwell = the_transceiver;
-
-        spin_lock(&langwell->wq_lock);
-
-        switch (langwell->otg.state) {
-        case OTG_STATE_A_IDLE:
-        case OTG_STATE_B_IDLE:
-        case OTG_STATE_A_WAIT_VFALL:
-        case OTG_STATE_A_VBUS_ERR:
-                transceiver_resume(pdev);
-                break;
-        case OTG_STATE_A_WAIT_BCON:
-                langwell_otg_add_timer(a_wait_bcon_tmr);
-                langwell_otg_drv_vbus(1);
-                if (langwell->host_ops)
-                        ret = langwell->host_ops->resume(pdev);
-                break;
-        case OTG_STATE_A_HOST:
-                langwell_otg_drv_vbus(1);
-                langwell_otg_phy_low_power(0);
-                if (langwell->host_ops)
-                        ret = langwell->host_ops->resume(pdev);
-                break;
-        case OTG_STATE_B_PERIPHERAL:
-                if (langwell->client_ops)
-                        ret = langwell->client_ops->resume(pdev);
-                else
-                        otg_dbg("client driver not loaded.\n");
-                break;
-        default:
-                otg_dbg("error state before suspend\n ");
-                break;
-        }
-
-        if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
-                                driver_name, the_transceiver) != 0) {
-                otg_dbg("request interrupt %d failed\n", pdev->irq);
-                ret = -EBUSY;
-        }
-
-        /* enable OTG interrupts */
-        langwell_otg_intr(1);
-
-        spin_unlock(&langwell->wq_lock);
-
-        queue_work(langwell->qwork, &langwell->work);
-
-
-        return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
-        return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
-        pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 9ed5ea568679..af456b48985f 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -53,6 +53,7 @@ EXPORT_SYMBOL(usb_nop_xceiv_register);
 void usb_nop_xceiv_unregister(void)
 {
         platform_device_unregister(pd);
+        pd = NULL;
 }
 EXPORT_SYMBOL(usb_nop_xceiv_unregister);
 
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61bfb7f4..0e4f2e41ace5 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options)
                         kfree(tty);
                 }
         }
-        /* So we know not to kill the hardware on a hangup on this
-           port. We have also bumped the use count by one so it won't go
-           idle */
+        /* Now that any required fake tty operations are completed restore
+         * the tty port count */
+        --port->port.count;
+        /* The console is special in terms of closing the device so
+         * indicate this port is now acting as a system console. */
         port->console = 1;
         retval = 0;
 
@@ -204,7 +206,7 @@ static void usb_console_write(struct console *co,
 
         dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-        if (!port->port.count) {
+        if (!port->console) {
                 dbg("%s - port not opened", __func__);
                 return;
         }
@@ -300,8 +302,7 @@ void usb_serial_console_exit(void)
 {
         if (usbcons_info.port) {
                 unregister_console(&usbcons);
-                if (usbcons_info.port->port.count)
-                        usbcons_info.port->port.count--;
+                usbcons_info.port->console = 0;
                 usbcons_info.port = NULL;
         }
 }
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2b9eeda62bfe..985cbcf48bda 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -67,6 +67,8 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
         { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
         { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+        { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+        { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
         { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
         { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
         { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -78,6 +80,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
         { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
         { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+        { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
         { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
         { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
         { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
@@ -94,7 +97,9 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
         { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+        { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
         { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+        { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
         { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
         { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
         { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9734085fd2fe..59adfe123110 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1228,8 +1228,8 @@ static void cypress_read_int_callback(struct urb *urb)
                 /* precursor to disconnect so just go away */
                 return;
         case -EPIPE:
-                usb_clear_halt(port->serial->dev, 0x81);
-                break;
+                /* Can't call usb_clear_halt while in_interrupt */
+                /* FALLS THROUGH */
         default:
                 /* something ugly is going on... */
                 dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5f08702f672f..b574878c78b2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,6 +33,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -107,6 +108,7 @@ struct ftdi_sio_quirk {
 
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int   ftdi_NDI_device_setup(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -118,6 +120,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
         .probe  = ftdi_mtxorb_hack_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+        .probe  = ftdi_NDI_device_setup,
+};
+
 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
         .port_probe = ftdi_USB_UIRT_setup,
 };
@@ -191,6 +197,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
         { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -579,6 +586,9 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
         { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
         { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
         { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -644,6 +654,16 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
         { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+        { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
         { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
         { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -660,6 +680,8 @@ static struct usb_device_id id_table_combined [] = {
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+        { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+                .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
         { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
         { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -667,7 +689,6 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
         { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
         { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
-        { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
         { USB_DEVICE(ATMEL_VID, STK541_PID) },
         { USB_DEVICE(DE_VID, STB_PID) },
         { USB_DEVICE(DE_VID, WHT_PID) },
@@ -677,6 +698,7 @@ static struct usb_device_id id_table_combined [] = {
         { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
                 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
         { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+        { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
         { },                                    /* Optional parameter entry */
         { }                                     /* Terminating entry */
 };
@@ -1023,6 +1045,16 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
         case FT2232C: /* FT2232C chip */
         case FT232RL:
                 if (baud <= 3000000) {
+                        __u16 product_id = le16_to_cpu(
+                                port->serial->dev->descriptor.idProduct);
+                        if (((FTDI_NDI_HUC_PID == product_id) ||
+                             (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+                             (FTDI_NDI_FUTURE_2_PID == product_id) ||
+                             (FTDI_NDI_FUTURE_3_PID == product_id) ||
+                             (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+                            (baud == 19200)) {
+                                baud = 1200000;
+                        }
                         div_value = ftdi_232bm_baud_to_divisor(baud);
                 } else {
                         dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1586,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
 } /* ftdi_HE_TIRA1_setup */
 
 /*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+        struct usb_device *udev = serial->dev;
+        int latency = ndi_latency_timer;
+        int rv = 0;
+        char buf[1];
+
+        if (latency == 0)
+                latency = 1;
+        if (latency > 99)
+                latency = 99;
+
+        dbg("%s setting NDI device latency to %d", __func__, latency);
+        dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+        rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+                                FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+                                FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+                                latency, 0, buf, 0, WDR_TIMEOUT);
+        return 0;
+}
+
+/*
  * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
  * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
  * userspace using openocd.
@@ -2622,3 +2687,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
 module_param(product, ushort, 0);
 MODULE_PARM_DESC(product, "User specified product ID");
 
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f1d440a728a3..24dbd99e87d7 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -506,6 +506,7 @@
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_R2000KU_TRUE_RNG   0xFB80  /* R2000KU TRUE RNG */
 #define FTDI_ELV_UR100_PID      0xFB58  /* USB-RS232-Umsetzer (UR 100) */
 #define FTDI_ELV_UM100_PID      0xFB5A  /* USB-Modul UM 100 */
 #define FTDI_ELV_UO100_PID      0xFB5B  /* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
 #define FTDI_CCSICDU20_0_PID    0xF9D0
 #define FTDI_CCSICDU40_1_PID    0xF9D1
 #define FTDI_CCSMACHX_2_PID     0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID    0xF9D4
+#define FTDI_CCSPRIME8_5_PID    0xF9D5
 
 /* Inside Accesso contactless reader (http://www.insidefr.com) */
 #define INSIDE_ACCESSO          0xFAD0
@@ -736,6 +740,15 @@
 #define FTDI_PYRAMID_PID        0xE6C8  /* Pyramid Appliance Display */
 
 /*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID                0xDA70  /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID        0xDA71  /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID           0xDA72  /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID           0xDA73  /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID         0xDA74  /* NDI Aurora SCU */
+
+/*
  * Posiflex inc retail equipment (http://www.posiflex.com.tw)
  */
 #define POSIFLEX_VID            0x0d3a  /* Vendor ID */
@@ -848,9 +861,6 @@
 #define TML_VID                 0x1B91  /* Vendor ID */
 #define TML_USB_SERIAL_PID      0x0064  /* USB - Serial Converter */
 
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID        0xDA70
-
 /* Propox devices */
 #define FTDI_PROPOX_JTAGCABLEII_PID     0xD738
 
@@ -934,6 +944,15 @@
 #define MARVELL_VID             0x9e88
 #define MARVELL_SHEEVAPLUG_PID  0x9e8f
 
+#define FTDI_TURTELIZER_PID     0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID       0x0c33  /* Vendor ID */
+#define AURICAL_USB_PID         0x0010  /* Aurical USB Audiometer */
+
 /*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bfc5ce000ef9..ccd4dd340d2c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -521,7 +521,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
         mos7720_port = usb_get_serial_port_data(port);
         if (mos7720_port == NULL) {
                 dbg("%s:leaving ...........", __func__);
-                return -ENODEV;
+                return 0;
         }
 
         for (i = 0; i < NUM_URBS; ++i) {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c40f95c1951c..270009afdf77 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,6 +26,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -123,10 +124,13 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- *  - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
 #define USB_VENDOR_ID_ATENINTL          0x0557
 #define ATENINTL_DEVICE_ID_UC2324       0x2011
+#define ATENINTL_DEVICE_ID_UC2322       0x7820
 
 /* Interrupt Routine Defines    */
 
@@ -176,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = {
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
         {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+        {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
         {}                      /* terminating entry */
 };
 
@@ -185,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
         {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
         {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+        {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
         {}                      /* terminating entry */
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 575816e6ba37..c784ddbe7b61 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -66,8 +66,10 @@ static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
                                 unsigned int set, unsigned int clear);
 static int  option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
+#endif
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID                        0x0AF0
@@ -205,7 +207,9 @@ static int  option_resume(struct usb_serial *serial);
 #define NOVATELWIRELESS_PRODUCT_MC727           0x4100
 #define NOVATELWIRELESS_PRODUCT_MC950D          0x4400
 #define NOVATELWIRELESS_PRODUCT_U727            0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW       0x5100
 #define NOVATELWIRELESS_PRODUCT_MC760           0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760         0x6002
 
 /* FUTURE NOVATEL PRODUCTS */
 #define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED  0X6001
@@ -258,11 +262,6 @@ static int  option_resume(struct usb_serial *serial);
 #define AXESSTEL_VENDOR_ID                      0x1726
 #define AXESSTEL_PRODUCT_MV110H                 0x1000
 
-#define ONDA_VENDOR_ID                          0x19d2
-#define ONDA_PRODUCT_MSA501HS                   0x0001
-#define ONDA_PRODUCT_ET502HS                    0x0002
-#define ONDA_PRODUCT_MT503HS                    0x2000
-
 #define BANDRICH_VENDOR_ID                      0x1A8D
 #define BANDRICH_PRODUCT_C100_1                 0x1002
 #define BANDRICH_PRODUCT_C100_2                 0x1003
@@ -300,6 +299,7 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_MF628                       0x0015
 #define ZTE_PRODUCT_MF626                       0x0031
 #define ZTE_PRODUCT_CDMA_TECH                   0xfffe
+#define ZTE_PRODUCT_AC8710                      0xfff1
 
 #define BENQ_VENDOR_ID                          0x04a5
 #define BENQ_PRODUCT_H10                        0x4068
@@ -307,11 +307,25 @@ static int  option_resume(struct usb_serial *serial);
 #define DLINK_VENDOR_ID                         0x1186
 #define DLINK_PRODUCT_DWM_652                   0x3e04
 
+#define QISDA_VENDOR_ID                         0x1da5
+#define QISDA_PRODUCT_H21_4512                  0x4512
+#define QISDA_PRODUCT_H21_4523                  0x4523
+#define QISDA_PRODUCT_H20_4515                  0x4515
+#define QISDA_PRODUCT_H20_4519                  0x4519
+
 
 /* TOSHIBA PRODUCTS */
 #define TOSHIBA_VENDOR_ID                       0x0930
 #define TOSHIBA_PRODUCT_HSDPA_MINICARD          0x1302
 
+#define ALINK_VENDOR_ID                         0x1e0e
+#define ALINK_PRODUCT_3GU                       0x9200
+
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID                       0x1bbb
+#define ALCATEL_PRODUCT_X060S                   0x0000
+
+
 static struct usb_device_id option_ids[] = {
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
         { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -428,8 +442,10 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -463,42 +479,6 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
         { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
         { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
-        { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
-        { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
-        { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
-        { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
         { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
         { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
@@ -523,14 +503,85 @@ static struct usb_device_id option_ids[] = {
         { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
         { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
         { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
-        { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
-        { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
-        { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
-        { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
         { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
-        { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+        { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+        { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+        { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+        { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
         { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+        { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+        { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+        { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
         { } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -539,8 +590,10 @@ static struct usb_driver option_driver = {
         .name       = "option",
         .probe      = usb_serial_probe,
         .disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
         .suspend    = usb_serial_suspend,
         .resume     = usb_serial_resume,
+#endif
         .id_table   = option_ids,
         .no_dynamic_id =        1,
 };
@@ -572,8 +625,10 @@ static struct usb_serial_driver option_1port_device = {
         .disconnect        = option_disconnect,
         .release           = option_release,
         .read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
         .suspend           = option_suspend,
         .resume            = option_resume,
+#endif
 };
 
 static int debug;
@@ -732,7 +787,6 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
                 memcpy(this_urb->transfer_buffer, buf, todo);
                 this_urb->transfer_buffer_length = todo;
 
-                this_urb->dev = port->serial->dev;
                 err = usb_submit_urb(this_urb, GFP_ATOMIC);
                 if (err) {
                         dbg("usb_submit_urb %p (write bulk) failed "
@@ -816,7 +870,6 @@ static void option_instat_callback(struct urb *urb)
         int status = urb->status;
         struct usb_serial_port *port =  urb->context;
         struct option_port_private *portdata = usb_get_serial_port_data(port);
-        struct usb_serial *serial = port->serial;
 
         dbg("%s", __func__);
         dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -860,7 +913,6 @@ static void option_instat_callback(struct urb *urb)
 
         /* Resubmit urb so we continue receiving IRQ data */
         if (status != -ESHUTDOWN && status != -ENOENT) {
-                urb->dev = serial->dev;
                 err = usb_submit_urb(urb, GFP_ATOMIC);
                 if (err)
                         dbg("%s: resubmit intr urb failed. (%d)",
@@ -913,7 +965,6 @@ static int option_open(struct tty_struct *tty,
                         struct usb_serial_port *port, struct file *filp)
 {
         struct option_port_private *portdata;
-        struct usb_serial *serial = port->serial;
         int i, err;
         struct urb *urb;
 
@@ -921,23 +972,11 @@ static int option_open(struct tty_struct *tty,
 
         dbg("%s", __func__);
 
-        /* Reset low level data toggle and start reading from endpoints */
+        /* Start reading from the IN endpoint */
         for (i = 0; i < N_IN_URB; i++) {
                 urb = portdata->in_urbs[i];
                 if (!urb)
                         continue;
-                if (urb->dev != serial->dev) {
-                        dbg("%s: dev %p != %p", __func__,
-                                urb->dev, serial->dev);
-                        continue;
-                }
-
-                /*
-                 * make sure endpoint data toggle is synchronized with the
-                 * device
-                 */
-                usb_clear_halt(urb->dev, urb->pipe);
-
                 err = usb_submit_urb(urb, GFP_KERNEL);
                 if (err) {
                         dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +985,6 @@ static int option_open(struct tty_struct *tty,
                 }
         }
 
-        /* Reset low level data toggle on out endpoints */
-        for (i = 0; i < N_OUT_URB; i++) {
-                urb = portdata->out_urbs[i];
-                if (!urb)
-                        continue;
-                urb->dev = serial->dev;
-                /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-                                usb_pipeout(urb->pipe), 0); */
-        }
-
         option_send_setup(port);
 
         return 0;
@@ -1195,6 +1224,7 @@ static void option_release(struct usb_serial *serial)
         }
 }
 
+#ifdef CONFIG_PM
 static int option_suspend(struct usb_serial *serial, pm_message_t message)
 {
         dbg("%s entered", __func__);
@@ -1218,7 +1248,6 @@ static int option_resume(struct usb_serial *serial)
                         dbg("%s: No interrupt URB for port %d\n", __func__, i);
                         continue;
                 }
-                port->interrupt_in_urb->dev = serial->dev;
                 err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
                 dbg("Submitted interrupt URB for port %d (result %d)", i, err);
                 if (err < 0) {
@@ -1254,6 +1283,7 @@ static int option_resume(struct usb_serial *serial)
         }
         return 0;
 }
+#endif
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index efaf59c4f5d0..7d15bfa7c2db 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,7 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
         { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
         { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+        { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
         { }                                     /* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1d7a22e3a9fd..12aac7d2462d 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -122,3 +122,7 @@
 /* Hewlett-Packard LD220-HP POS Pole Display */
 #define HP_VENDOR_ID            0x03f0
 #define HP_LD220_PRODUCT_ID     0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID        0x04b8
+#define CRESSI_EDY_PRODUCT_ID   0x0521
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 032f7aeb40a4..f48d05e0acc1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -181,35 +181,50 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 };
 
 static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+        { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+        { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
+
         { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
         { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
         { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
-        { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
         { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
-        { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
         { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+        { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
+        { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
+        { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
         { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
         { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+        { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
         { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
-         /* Sierra Wireless C597 */
+        /* Sierra Wireless C597 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
-         /* Sierra Wireless Device */
+        /* Sierra Wireless T598 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
-        { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
-        { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
-        { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+        { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+        { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+        { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+        { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
 
         { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
-        { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
         { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+        { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+        { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
+        { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
+        { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
         { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
-        { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
+        { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
         { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
-        { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+        { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
         { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
         { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+        { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
         { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
         { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+        { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
+        { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
+        { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
+        { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
         { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
         { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
         /* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@ static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
         /* Sierra Wireless C885 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
-        /* Sierra Wireless Device */
+        /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
-        /* Sierra Wireless Device */
+        /* Sierra Wireless C22/C33 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
-        /* Sierra Wireless Device */
+        /* Sierra Wireless HSPA Non-Composite Device */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
-        { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-        { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+        { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
         { USB_DEVICE(0x1199, 0x68A3),   /* Sierra Wireless Direct IP modems */
           .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
         },
@@ -814,7 +826,7 @@ static int sierra_startup(struct usb_serial *serial)
         return 0;
 }
 
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
 {
         int i;
         struct usb_serial_port *port;
@@ -830,7 +842,6 @@ static void sierra_disconnect(struct usb_serial *serial)
                 if (!portdata)
                         continue;
                 kfree(portdata);
-                usb_set_serial_port_data(port, NULL);
         }
 }
 
@@ -853,7 +864,7 @@ static struct usb_serial_driver sierra_device = {
         .tiocmget          = sierra_tiocmget,
         .tiocmset          = sierra_tiocmset,
         .attach            = sierra_startup,
-        .disconnect        = sierra_disconnect,
+        .release           = sierra_release,
         .read_int_callback = sierra_instat_callback,
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 991d8232e376..3bc609fe2242 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -191,7 +191,6 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
-        { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -728,7 +727,7 @@ static int ti_write_room(struct tty_struct *tty)
         dbg("%s - port %d", __func__, port->number);
 
         if (tport == NULL)
-                return -ENODEV;
+                return 0;
 
         spin_lock_irqsave(&tport->tp_lock, flags);
         room = ti_buf_space_avail(tport->tp_write_buf);
@@ -749,7 +748,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
         dbg("%s - port %d", __func__, port->number);
 
         if (tport == NULL)
-                return -ENODEV;
+                return 0;
 
         spin_lock_irqsave(&tport->tp_lock, flags);
         chars = ti_buf_data_avail(tport->tp_write_buf);
@@ -1658,7 +1657,7 @@ static int ti_do_download(struct usb_device *dev, int pipe,
         u8 cs = 0;
         int done;
         struct ti_firmware_header *header;
-        int status;
+        int status = 0;
         int len;
 
         for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index a84216464ca0..99188c92068b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -31,6 +32,7 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/uaccess.h>
+#include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -183,6 +185,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
         struct usb_serial_port *port;
         unsigned int portNumber;
         int retval = 0;
+        int first = 0;
 
         dbg("%s", __func__);
 
@@ -220,8 +223,9 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
         tty->driver_data = port;
         tty_port_tty_set(&port->port, tty);
 
-        if (port->port.count == 1) {
-
+        /* If the console is attached, the device is already open */
+        if (port->port.count == 1 && !port->console) {
+                first = 1;
                 /* lock this module before we call it
                  * this may fail, which means we must bail out,
                  * safe because we are called with BKL held */
@@ -244,13 +248,21 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
                 if (retval)
                         goto bailout_interface_put;
                 mutex_unlock(&serial->disc_mutex);
+                set_bit(ASYNCB_INITIALIZED, &port->port.flags);
         }
         mutex_unlock(&port->mutex);
         /* Now do the correct tty layer semantics */
         retval = tty_port_block_til_ready(&port->port, tty, filp);
-        if (retval == 0)
+        if (retval == 0) {
+                if (!first)
+                        usb_serial_put(serial);
                 return 0;
-
+        }
+        mutex_lock(&port->mutex);
+        if (first == 0)
+                goto bailout_mutex_unlock;
+        /* Undo the initial port actions */
+        mutex_lock(&serial->disc_mutex);
 bailout_interface_put:
         usb_autopm_put_interface(serial->interface);
 bailout_module_put:
@@ -338,6 +350,22 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 
         dbg("%s - port %d", __func__, port->number);
 
+        /* FIXME:
+           This leaves a very narrow race. Really we should do the
+           serial_do_free() on tty->shutdown(), but tty->shutdown can
+           be called from IRQ context and serial_do_free can sleep.
+
+           The right fix is probably to make the tty free (which is rare)
+           and thus tty->shutdown() occur via a work queue and simplify all
+           the drivers that use it.
+        */
+        if (tty_hung_up_p(filp)) {
+                /* serial_hangup already called serial_down at this point.
+                   Another user may have already reopened the port but
+                   serial_do_free is refcounted */
+                serial_do_free(port);
+                return;
+        }
 
         if (tty_port_close_start(&port->port, tty, filp) == 0)
                 return;
@@ -353,7 +381,8 @@ static void serial_hangup(struct tty_struct *tty)
         struct usb_serial_port *port = tty->driver_data;
         serial_do_down(port);
         tty_port_hangup(&port->port);
-        serial_do_free(port);
+        /* We must not free port yet - the USB serial layer depends on it's
+           continued existence */
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -392,7 +421,6 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
         struct usb_serial_port *port = tty->driver_data;
         dbg("%s = port %d", __func__, port->number);
 
-        WARN_ON(!port->port.count);
         /* if the device was unplugged then any remaining characters
            fell out of the connector ;) */
         if (port->serial->disconnected)
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index d41cc0a970f7..773a5cd38c5a 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -118,6 +118,9 @@ static int option_inquiry(struct us_data *us)
 
         result = memcmp(buffer+8, "Option", 6);
 
+        if (result != 0)
+                result = memcmp(buffer+8, "ZCOPTION", 8);
+
         /* Read the CSW */
         usb_stor_bulk_transfer_buf(us,
                         us->recv_bulk_pipe,
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcb320217218..e20dc525d177 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
                                  US_BULK_GET_MAX_LUN, 
                                  USB_DIR_IN | USB_TYPE_CLASS | 
                                  USB_RECIP_INTERFACE,
-                                 0, us->ifnum, us->iobuf, 1, HZ);
+                                 0, us->ifnum, us->iobuf, 1, 10*HZ);
 
         US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
                   result, us->iobuf[0]);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 41296a6807e2..1999b1834814 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1119,12 +1119,13 @@ config FB_CARILLO_RANCH
 
 config FB_INTEL
         tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
-        depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
+        depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
         select FB_MODE_HELPERS
         select FB_CFB_FILLRECT
         select FB_CFB_COPYAREA
         select FB_CFB_IMAGEBLIT
         select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+        depends on !DRM_I915
         help
           This driver supports the on-board graphics built in to the Intel
           830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index c3ebb6b41ce1..7aed2565c1bd 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -72,7 +72,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
                 if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
                         printk(KERN_INFO "bl : failed to set brightness\n");
                         ret = -ETIMEDOUT;
-                        goto out
+                        goto out;
                 }
 
                 /* at this point we expect that the mcu has accepted
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index e641584e212e..887166267443 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -145,6 +145,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev,
         struct backlight_device *bl = platform_get_drvdata(pdev);
         struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
 
+        if (pb->notify)
+                pb->notify(0);
         pwm_config(pb->pwm, 0, pb->period);
         pwm_disable(pb->pwm);
         return 0;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 53ea05645ff8..a85c818be945 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -16,7 +16,6 @@
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/errno.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 5c1a2c01778f..9ae9cd32bd06 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -256,8 +256,8 @@ static void fix_edid(unsigned char *edid, int fix)
 
 static int edid_checksum(unsigned char *edid)
 {
-        unsigned char i, csum = 0, all_null = 0;
-        int err = 0, fix = check_edid(edid);
+        unsigned char csum = 0, all_null = 0;
+        int i, err = 0, fix = check_edid(edid);
 
         if (fix)
                 fix_edid(edid, fix);
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 15a0ee6d8e23..30ae3022f633 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,6 +33,7 @@
 #include <linux/math64.h>
 
 #include <mach/imxfb.h>
+#include <mach/hardware.h>
 
 /*
  * Complain if VAR is out of range.
@@ -129,6 +130,10 @@
 #define LCDISR_EOF      (1<<1)
 #define LCDISR_BOF      (1<<0)
 
+/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+
+
 /*
  * These are the bitfields for each
  * display depth that we support.
@@ -145,10 +150,6 @@ struct imxfb_info {
         void __iomem            *regs;
         struct clk              *clk;
 
-        u_int                   max_bpp;
-        u_int                   max_xres;
-        u_int                   max_yres;
-
         /*
          * These are the addresses we mapped
          * the framebuffer memory region to.
@@ -172,6 +173,9 @@ struct imxfb_info {
                                 cmap_static:1,
                                 unused:30;
 
+        struct imx_fb_videomode *mode;
+        int                     num_modes;
+
         void (*lcd_power)(int);
         void (*backlight_power)(int);
 };
@@ -298,6 +302,18 @@ static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
         return ret;
 }
 
+static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
+{
+        struct imx_fb_videomode *m;
+        int i;
+
+        for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
+                if (!strcmp(m->mode.name, fb_mode))
+                        return m;
+        }
+        return NULL;
+}
+
 /*
  *  imxfb_check_var():
  *    Round up in the following order: bits_per_pixel, xres,
@@ -308,35 +324,81 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
         struct imxfb_info *fbi = info->par;
         struct imxfb_rgb *rgb;
+        const struct imx_fb_videomode *imxfb_mode;
+        unsigned long lcd_clk;
+        unsigned long long tmp;
+        u32 pcr = 0;
 
         if (var->xres < MIN_XRES)
                 var->xres = MIN_XRES;
         if (var->yres < MIN_YRES)
                 var->yres = MIN_YRES;
-        if (var->xres > fbi->max_xres)
-                var->xres = fbi->max_xres;
-        if (var->yres > fbi->max_yres)
-                var->yres = fbi->max_yres;
-        var->xres_virtual = max(var->xres_virtual, var->xres);
-        var->yres_virtual = max(var->yres_virtual, var->yres);
+
+        imxfb_mode = imxfb_find_mode(fbi);
+        if (!imxfb_mode)
+                return -EINVAL;
+
+        var->xres               = imxfb_mode->mode.xres;
+        var->yres               = imxfb_mode->mode.yres;
+        var->bits_per_pixel     = imxfb_mode->bpp;
+        var->pixclock           = imxfb_mode->mode.pixclock;
+        var->hsync_len          = imxfb_mode->mode.hsync_len;
+        var->left_margin        = imxfb_mode->mode.left_margin;
+        var->right_margin       = imxfb_mode->mode.right_margin;
+        var->vsync_len          = imxfb_mode->mode.vsync_len;
+        var->upper_margin       = imxfb_mode->mode.upper_margin;
+        var->lower_margin       = imxfb_mode->mode.lower_margin;
+        var->sync               = imxfb_mode->mode.sync;
+        var->xres_virtual       = max(var->xres_virtual, var->xres);
+        var->yres_virtual       = max(var->yres_virtual, var->yres);
 
         pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+
+        lcd_clk = clk_get_rate(fbi->clk);
+
+        tmp = var->pixclock * (unsigned long long)lcd_clk;
+
+        do_div(tmp, 1000000);
+
+        if (do_div(tmp, 1000000) > 500000)
+                tmp++;
+
+        pcr = (unsigned int)tmp;
+
+        if (--pcr > 0x3F) {
+                pcr = 0x3F;
+                printk(KERN_WARNING "Must limit pixel clock to %luHz\n",
+                                lcd_clk / pcr);
+        }
+
         switch (var->bits_per_pixel) {
         case 32:
+                pcr |= PCR_BPIX_18;
                 rgb = &def_rgb_18;
                 break;
         case 16:
         default:
-                if (fbi->pcr & PCR_TFT)
+                if (cpu_is_mx1())
+                        pcr |= PCR_BPIX_12;
+                else
+                        pcr |= PCR_BPIX_16;
+
+                if (imxfb_mode->pcr & PCR_TFT)
                         rgb = &def_rgb_16_tft;
                 else
                         rgb = &def_rgb_16_stn;
                 break;
         case 8:
+                pcr |= PCR_BPIX_8;
                 rgb = &def_rgb_8;
                 break;
         }
 
+        /* add sync polarities */
+        pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
+
+        fbi->pcr = pcr;
+
         /*
          * Copy the RGB parameters for this display
          * from the machine specific parameters.
@@ -393,10 +455,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 
         writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
 
-        /* physical screen start address            */
-        writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4),
-                fbi->regs + LCDC_VPW);
-
         /* panning offset 0 (0 pixel offset)        */
         writel(0x00000000, fbi->regs + LCDC_POS);
 
@@ -468,8 +526,6 @@ static struct fb_ops imxfb_ops = {
 static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
         struct imxfb_info *fbi = info->par;
-        unsigned int pcr, lcd_clk;
-        unsigned long long tmp;
 
         pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
                 var->xres, var->hsync_len,
@@ -505,6 +561,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
                         info->fix.id, var->lower_margin);
 #endif
 
+        /* physical screen start address            */
+        writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4),
+                fbi->regs + LCDC_VPW);
+
         writel(HCR_H_WIDTH(var->hsync_len - 1) |
                 HCR_H_WAIT_1(var->right_margin - 1) |
                 HCR_H_WAIT_2(var->left_margin - 3),
@@ -518,22 +578,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
         writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
                         fbi->regs + LCDC_SIZE);
 
-        lcd_clk = clk_get_rate(fbi->clk);
-        tmp = var->pixclock * (unsigned long long)lcd_clk;
-        do_div(tmp, 1000000);
-        if (do_div(tmp, 1000000) > 500000)
-                tmp++;
-        pcr = (unsigned int)tmp;
-        if (--pcr > 0x3F) {
-                pcr = 0x3F;
-                printk(KERN_WARNING "Must limit pixel clock to %uHz\n",
-                                lcd_clk / pcr);
-        }
-
-        /* add sync polarities */
-        pcr |= fbi->pcr & ~0x3F;
-
-        writel(pcr, fbi->regs + LCDC_PCR);
+        writel(fbi->pcr, fbi->regs + LCDC_PCR);
         writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
         writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
         writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -575,6 +620,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
         struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
         struct fb_info *info = dev_get_drvdata(&pdev->dev);
         struct imxfb_info *fbi = info->par;
+        struct imx_fb_videomode *m;
+        int i;
 
         pr_debug("%s\n",__func__);
 
@@ -603,35 +650,18 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
         info->fbops                     = &imxfb_ops;
         info->flags                     = FBINFO_FLAG_DEFAULT |
                                           FBINFO_READS_FAST;
-
-        fbi->max_xres                   = pdata->xres;
-        info->var.xres                  = pdata->xres;
-        info->var.xres_virtual          = pdata->xres;
-        fbi->max_yres                   = pdata->yres;
-        info->var.yres                  = pdata->yres;
-        info->var.yres_virtual          = pdata->yres;
-        fbi->max_bpp                    = pdata->bpp;
-        info->var.bits_per_pixel        = pdata->bpp;
-        info->var.nonstd                = pdata->nonstd;
-        info->var.pixclock              = pdata->pixclock;
-        info->var.hsync_len             = pdata->hsync_len;
-        info->var.left_margin           = pdata->left_margin;
-        info->var.right_margin          = pdata->right_margin;
-        info->var.vsync_len             = pdata->vsync_len;
-        info->var.upper_margin          = pdata->upper_margin;
-        info->var.lower_margin          = pdata->lower_margin;
-        info->var.sync                  = pdata->sync;
         info->var.grayscale             = pdata->cmap_greyscale;
         fbi->cmap_inverse               = pdata->cmap_inverse;
         fbi->cmap_static                = pdata->cmap_static;
-        fbi->pcr                        = pdata->pcr;
         fbi->lscr1                      = pdata->lscr1;
         fbi->dmacr                      = pdata->dmacr;
         fbi->pwmr                       = pdata->pwmr;
         fbi->lcd_power                  = pdata->lcd_power;
         fbi->backlight_power            = pdata->backlight_power;
-        info->fix.smem_len              = fbi->max_xres * fbi->max_yres *
-                                          fbi->max_bpp / 8;
+
+        for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
+                info->fix.smem_len = max_t(size_t, info->fix.smem_len,
+                                m->mode.xres * m->mode.yres * m->bpp / 8);
 
         return 0;
 }
@@ -642,9 +672,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
         struct fb_info *info;
         struct imx_fb_platform_data *pdata;
         struct resource *res;
-        int ret;
+        int ret, i;
 
-        printk("i.MX Framebuffer driver\n");
+        dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
 
         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
         if (!res)
@@ -662,6 +692,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
         fbi = info->par;
 
+        if (!fb_mode)
+                fb_mode = pdata->mode[0].mode.name;
+
         platform_set_drvdata(pdev, info);
 
         ret = imxfb_init_fbinfo(pdev);
@@ -684,7 +717,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
         fbi->regs = ioremap(res->start, resource_size(res));
         if (fbi->regs == NULL) {
-                printk(KERN_ERR"Cannot map frame buffer registers\n");
+                dev_err(&pdev->dev, "Cannot map frame buffer registers\n");
                 goto failed_ioremap;
         }
 
@@ -719,6 +752,13 @@ static int __init imxfb_probe(struct platform_device *pdev)
                         goto failed_platform_init;
         }
 
+        fbi->mode = pdata->mode;
+        fbi->num_modes = pdata->num_modes;
+
+        INIT_LIST_HEAD(&info->modelist);
+        for (i = 0; i < pdata->num_modes; i++)
+                fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
+
         /*
          * This makes sure that our colour bitfield
          * descriptors are correctly initialised.
@@ -754,7 +794,7 @@ failed_map:
 failed_getclock:
         iounmap(fbi->regs);
 failed_ioremap:
-        release_mem_region(res->start, res->end - res->start);
+        release_mem_region(res->start, resource_size(res));
 failed_req:
         kfree(info->pseudo_palette);
 failed_init:
@@ -785,7 +825,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
         framebuffer_release(info);
 
         iounmap(fbi->regs);
-        release_mem_region(res->start, res->end - res->start + 1);
+        release_mem_region(res->start, resource_size(res));
         clk_disable(fbi->clk);
         clk_put(fbi->clk);
 
@@ -811,8 +851,34 @@ static struct platform_driver imxfb_driver = {
         },
 };
 
+static int imxfb_setup(void)
+{
+#ifndef MODULE
+        char *opt, *options = NULL;
+
+        if (fb_get_options("imxfb", &options))
+                return -ENODEV;
+
+        if (!options || !*options)
+                return 0;
+
+        while ((opt = strsep(&options, ",")) != NULL) {
+                if (!*opt)
+                        continue;
+                else
+                        fb_mode = opt;
+        }
+#endif
+        return 0;
+}
+
 int __init imxfb_init(void)
 {
+        int ret = imxfb_setup();
+
+        if (ret < 0)
+                return ret;
+
         return platform_driver_probe(&imxfb_driver, imxfb_probe);
 }
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 4ea99bfc37b4..8862233d57b6 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -1254,7 +1254,7 @@ static struct fb_ops omapfb_ops = {
 static ssize_t omapfb_show_caps_num(struct device *dev,
                                     struct device_attribute *attr, char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
         int plane;
         size_t size;
         struct omapfb_caps caps;
@@ -1274,7 +1274,7 @@ static ssize_t omapfb_show_caps_num(struct device *dev,
 static ssize_t omapfb_show_caps_text(struct device *dev,
                                      struct device_attribute *attr, char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
         int i;
         struct omapfb_caps caps;
         int plane;
@@ -1321,7 +1321,7 @@ static DEVICE_ATTR(caps_text, 0444, omapfb_show_caps_text, NULL);
 static ssize_t omapfb_show_panel_name(struct device *dev,
                                       struct device_attribute *attr, char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
 
         return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->panel->name);
 }
@@ -1330,7 +1330,7 @@ static ssize_t omapfb_show_bklight_level(struct device *dev,
                                          struct device_attribute *attr,
                                          char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
         int r;
 
         if (fbdev->panel->get_bklight_level) {
@@ -1345,7 +1345,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev,
                                           struct device_attribute *attr,
                                           const char *buf, size_t size)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
         int r;
 
         if (fbdev->panel->set_bklight_level) {
@@ -1364,7 +1364,7 @@ static ssize_t omapfb_store_bklight_level(struct device *dev,
 static ssize_t omapfb_show_bklight_max(struct device *dev,
                                        struct device_attribute *attr, char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
         int r;
 
         if (fbdev->panel->get_bklight_level) {
@@ -1397,7 +1397,7 @@ static struct attribute_group panel_attr_grp = {
 static ssize_t omapfb_show_ctrl_name(struct device *dev,
                                      struct device_attribute *attr, char *buf)
 {
-        struct omapfb_device *fbdev = (struct omapfb_device *)dev->driver_data;
+        struct omapfb_device *fbdev = dev_get_drvdata(dev);
 
         return snprintf(buf, PAGE_SIZE, "%s\n", fbdev->ctrl->name);
 }
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index bb63c07e13de..5a72083dc67c 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -964,7 +964,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
         struct s3c_fb *sfb = platform_get_drvdata(pdev);
         int win;
 
-        for (win = 0; win <= S3C_FB_MAX_WIN; win++)
+        for (win = 0; win < S3C_FB_MAX_WIN; win++)
                 if (sfb->windows[win])
                         s3c_fb_release_win(sfb, sfb->windows[win]);
 
@@ -988,7 +988,7 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
         struct s3c_fb_win *win;
         int win_no;
 
-        for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
+        for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
                 win = sfb->windows[win_no];
                 if (!win)
                         continue;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 193c8f0e5cc5..248e00ec4dc1 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -52,8 +52,10 @@ struct virtio_pci_device
         char (*msix_names)[256];
         /* Number of available vectors */
         unsigned msix_vectors;
-        /* Vectors allocated */
+        /* Vectors allocated, excluding per-vq vectors if any */
         unsigned msix_used_vectors;
+        /* Whether we have vector per vq */
+        bool per_vq_vectors;
 };
 
 /* Constants for MSI-X */
@@ -258,7 +260,6 @@ static void vp_free_vectors(struct virtio_device *vdev)
 
         for (i = 0; i < vp_dev->msix_used_vectors; ++i)
                 free_irq(vp_dev->msix_entries[i].vector, vp_dev);
-        vp_dev->msix_used_vectors = 0;
 
         if (vp_dev->msix_enabled) {
                 /* Disable the vector used for configuration */
@@ -267,80 +268,77 @@ static void vp_free_vectors(struct virtio_device *vdev)
                 /* Flush the write out to device */
                 ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
 
-                vp_dev->msix_enabled = 0;
                 pci_disable_msix(vp_dev->pci_dev);
+                vp_dev->msix_enabled = 0;
+                vp_dev->msix_vectors = 0;
         }
-}
 
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
-                          int *options, int noptions)
-{
-        int i;
-        for (i = 0; i < noptions; ++i)
-                if (!pci_enable_msix(dev, entries, options[i]))
-                        return options[i];
-        return -EBUSY;
+        vp_dev->msix_used_vectors = 0;
+        kfree(vp_dev->msix_names);
+        vp_dev->msix_names = NULL;
+        kfree(vp_dev->msix_entries);
+        vp_dev->msix_entries = NULL;
 }
 
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+                              bool per_vq_vectors)
 {
         struct virtio_pci_device *vp_dev = to_vp_device(vdev);
         const char *name = dev_name(&vp_dev->vdev.dev);
         unsigned i, v;
         int err = -ENOMEM;
-        /* We want at most one vector per queue and one for config changes.
-         * Fallback to separate vectors for config and a shared for queues.
-         * Finally fall back to regular interrupts. */
-        int options[] = { max_vqs + 1, 2 };
-        int nvectors = max(options[0], options[1]);
+
+        if (!nvectors) {
+                /* Can't allocate MSI-X vectors, use regular interrupt */
+                vp_dev->msix_vectors = 0;
+                err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+                                  IRQF_SHARED, name, vp_dev);
+                if (err)
+                        return err;
+                vp_dev->intx_enabled = 1;
+                return 0;
+        }
 
         vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
                                        GFP_KERNEL);
         if (!vp_dev->msix_entries)
-                goto error_entries;
+                goto error;
         vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
                                      GFP_KERNEL);
         if (!vp_dev->msix_names)
-                goto error_names;
+                goto error;
 
         for (i = 0; i < nvectors; ++i)
                 vp_dev->msix_entries[i].entry = i;
 
-        err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
-                             options, ARRAY_SIZE(options));
-        if (err < 0) {
-                /* Can't allocate enough MSI-X vectors, use regular interrupt */
-                vp_dev->msix_vectors = 0;
-                err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
-                                  IRQF_SHARED, name, vp_dev);
-                if (err)
-                        goto error_irq;
-                vp_dev->intx_enabled = 1;
-        } else {
-                vp_dev->msix_vectors = err;
-                vp_dev->msix_enabled = 1;
-
-                /* Set the vector used for configuration */
-                v = vp_dev->msix_used_vectors;
-                snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
-                         "%s-config", name);
-                err = request_irq(vp_dev->msix_entries[v].vector,
-                                  vp_config_changed, 0, vp_dev->msix_names[v],
-                                  vp_dev);
-                if (err)
-                        goto error_irq;
-                ++vp_dev->msix_used_vectors;
-
-                iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-                /* Verify we had enough resources to assign the vector */
-                v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-                if (v == VIRTIO_MSI_NO_VECTOR) {
-                        err = -EBUSY;
-                        goto error_irq;
-                }
+        err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+        if (err > 0)
+                err = -ENOSPC;
+        if (err)
+                goto error;
+        vp_dev->msix_vectors = nvectors;
+        vp_dev->msix_enabled = 1;
+
+        /* Set the vector used for configuration */
+        v = vp_dev->msix_used_vectors;
+        snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+                 "%s-config", name);
+        err = request_irq(vp_dev->msix_entries[v].vector,
+                          vp_config_changed, 0, vp_dev->msix_names[v],
+                          vp_dev);
+        if (err)
+                goto error;
+        ++vp_dev->msix_used_vectors;
+
+        iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+        /* Verify we had enough resources to assign the vector */
+        v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+        if (v == VIRTIO_MSI_NO_VECTOR) {
+                err = -EBUSY;
+                goto error;
         }
 
-        if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+        if (!per_vq_vectors) {
                 /* Shared vector for all VQs */
                 v = vp_dev->msix_used_vectors;
                 snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
@@ -349,28 +347,25 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
                                   vp_vring_interrupt, 0, vp_dev->msix_names[v],
                                   vp_dev);
                 if (err)
-                        goto error_irq;
+                        goto error;
                 ++vp_dev->msix_used_vectors;
         }
         return 0;
-error_irq:
+error:
         vp_free_vectors(vdev);
-        kfree(vp_dev->msix_names);
-error_names:
-        kfree(vp_dev->msix_entries);
-error_entries:
         return err;
 }
 
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
                                     void (*callback)(struct virtqueue *vq),
-                                    const char *name)
+                                    const char *name,
+                                    u16 vector)
 {
         struct virtio_pci_device *vp_dev = to_vp_device(vdev);
         struct virtio_pci_vq_info *info;
         struct virtqueue *vq;
         unsigned long flags, size;
-        u16 num, vector;
+        u16 num;
         int err;
 
         /* Select the queue we're interested in */
@@ -389,7 +384,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
         info->queue_index = index;
         info->num = num;
-        info->vector = VIRTIO_MSI_NO_VECTOR;
+        info->vector = vector;
 
         size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
         info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -413,22 +408,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
         vq->priv = info;
         info->vq = vq;
 
-        /* allocate per-vq vector if available and necessary */
-        if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
-                vector = vp_dev->msix_used_vectors;
-                snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
-                         "%s-%s", dev_name(&vp_dev->vdev.dev), name);
-                err = request_irq(vp_dev->msix_entries[vector].vector,
-                                  vring_interrupt, 0,
-                                  vp_dev->msix_names[vector], vq);
-                if (err)
-                        goto out_request_irq;
-                info->vector = vector;
-                ++vp_dev->msix_used_vectors;
-        } else
-                vector = VP_MSIX_VQ_VECTOR;
-
-         if (callback && vp_dev->msix_enabled) {
+         if (vector != VIRTIO_MSI_NO_VECTOR) {
                 iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
                 vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
                 if (vector == VIRTIO_MSI_NO_VECTOR) {
@@ -444,11 +424,6 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
         return vq;
 
 out_assign:
-        if (info->vector != VIRTIO_MSI_NO_VECTOR) {
-                free_irq(vp_dev->msix_entries[info->vector].vector, vq);
-                --vp_dev->msix_used_vectors;
-        }
-out_request_irq:
         vring_del_virtqueue(vq);
 out_activate_queue:
         iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
@@ -462,12 +437,13 @@ static void vp_del_vq(struct virtqueue *vq)
 {
         struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
         struct virtio_pci_vq_info *info = vq->priv;
-        unsigned long size;
+        unsigned long flags, size;
 
-        iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+        spin_lock_irqsave(&vp_dev->lock, flags);
+        list_del(&info->node);
+        spin_unlock_irqrestore(&vp_dev->lock, flags);
 
-        if (info->vector != VIRTIO_MSI_NO_VECTOR)
-                free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+        iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 
         if (vp_dev->msix_enabled) {
                 iowrite16(VIRTIO_MSI_NO_VECTOR,
@@ -489,36 +465,62 @@ static void vp_del_vq(struct virtqueue *vq)
 /* the config->del_vqs() implementation */
 static void vp_del_vqs(struct virtio_device *vdev)
 {
+        struct virtio_pci_device *vp_dev = to_vp_device(vdev);
         struct virtqueue *vq, *n;
+        struct virtio_pci_vq_info *info;
 
-        list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+        list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+                info = vq->priv;
+                if (vp_dev->per_vq_vectors)
+                        free_irq(vp_dev->msix_entries[info->vector].vector, vq);
                 vp_del_vq(vq);
+        }
+        vp_dev->per_vq_vectors = false;
 
         vp_free_vectors(vdev);
 }
 
-/* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
-                       struct virtqueue *vqs[],
-                       vq_callback_t *callbacks[],
-                       const char *names[])
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+                              struct virtqueue *vqs[],
+                              vq_callback_t *callbacks[],
+                              const char *names[],
+                              int nvectors,
+                              bool per_vq_vectors)
 {
-        int vectors = 0;
-        int i, err;
-
-        /* How many vectors would we like? */
-        for (i = 0; i < nvqs; ++i)
-                if (callbacks[i])
-                        ++vectors;
+        struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+        u16 vector;
+        int i, err, allocated_vectors;
 
-        err = vp_request_vectors(vdev, vectors);
+        err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
         if (err)
                 goto error_request;
 
+        vp_dev->per_vq_vectors = per_vq_vectors;
+        allocated_vectors = vp_dev->msix_used_vectors;
         for (i = 0; i < nvqs; ++i) {
-                vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
-                if (IS_ERR(vqs[i]))
+                if (!callbacks[i] || !vp_dev->msix_enabled)
+                        vector = VIRTIO_MSI_NO_VECTOR;
+                else if (vp_dev->per_vq_vectors)
+                        vector = allocated_vectors++;
+                else
+                        vector = VP_MSIX_VQ_VECTOR;
+                vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+                if (IS_ERR(vqs[i])) {
+                        err = PTR_ERR(vqs[i]);
                         goto error_find;
+                }
+                /* allocate per-vq irq if available and necessary */
+                if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+                        snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+                                 "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+                        err = request_irq(vp_dev->msix_entries[vector].vector,
+                                          vring_interrupt, 0,
+                                          vp_dev->msix_names[vector], vqs[i]);
+                        if (err) {
+                                vp_del_vq(vqs[i]);
+                                goto error_find;
+                        }
+                }
         }
         return 0;
 
@@ -526,7 +528,37 @@ error_find:
         vp_del_vqs(vdev);
 
 error_request:
-        return PTR_ERR(vqs[i]);
+        return err;
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+                       struct virtqueue *vqs[],
+                       vq_callback_t *callbacks[],
+                       const char *names[])
+{
+        int vectors = 0;
+        int i, uninitialized_var(err);
+
+        /* How many vectors would we like? */
+        for (i = 0; i < nvqs; ++i)
+                if (callbacks[i])
+                        ++vectors;
+
+        /* We want at most one vector per queue and one for config changes. */
+        err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+                                 vectors + 1, true);
+        if (!err)
+                return 0;
+        /* Fallback to separate vectors for config and a shared for queues. */
+        err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+                                 2, false);
+        if (!err)
+                return 0;
+        /* Finally fall back to regular interrupts. */
+        err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+                                 0, false);
+        return err;
 }
 
 static struct virtio_config_ops virtio_pci_config_ops = {
@@ -669,7 +701,7 @@ static int __init virtio_pci_init(void)
 
         err = pci_register_driver(&virtio_pci_driver);
         if (err)
-                device_unregister(virtio_pci_root);
+                root_device_unregister(virtio_pci_root);
 
         return err;
 }
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
index e9f950ff86ea..cdd55e0d09f8 100644
--- a/drivers/watchdog/ep93xx_wdt.c
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -29,6 +29,7 @@
 #include <linux/watchdog.h>
 #include <linux/timer.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 #define WDT_VERSION     "0.3"
diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c
index 6fcb1e7095cf..92828281a30b 100644
--- a/fs/9p/vfs_addr.c
+++ b/fs/9p/vfs_addr.c
@@ -57,7 +57,7 @@ static int v9fs_vfs_readpage(struct file *filp, struct page *page)
         buffer = kmap(page);
         offset = page_offset(page);
 
-        retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE);
+        retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
         if (retval < 0)
                 goto done;
 
diff --git a/fs/Kconfig b/fs/Kconfig
index a97263be6a91..0e7da7bb5d93 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -186,32 +186,7 @@ source "fs/romfs/Kconfig"
 source "fs/sysv/Kconfig"
 source "fs/ufs/Kconfig"
 source "fs/exofs/Kconfig"
-
-config NILFS2_FS
-        tristate "NILFS2 file system support (EXPERIMENTAL)"
-        depends on BLOCK && EXPERIMENTAL
-        select CRC32
-        help
-          NILFS2 is a log-structured file system (LFS) supporting continuous
-          snapshotting.  In addition to versioning capability of the entire
-          file system, users can even restore files mistakenly overwritten or
-          destroyed just a few seconds ago.  Since this file system can keep
-          consistency like conventional LFS, it achieves quick recovery after
-          system crashes.
-
-          NILFS2 creates a number of checkpoints every few seconds or per
-          synchronous write basis (unless there is no change).  Users can
-          select significant versions among continuously created checkpoints,
-          and can change them into snapshots which will be preserved for long
-          periods until they are changed back to checkpoints.  Each
-          snapshot is mountable as a read-only file system concurrently with
-          its writable mount, and this feature is convenient for online backup.
-
-          Some features including atime, extended attributes, and POSIX ACLs,
-          are not supported yet.
-
-          To compile this file system support as a module, choose M here: the
-          module will be called nilfs2.  If unsure, say N.
+source "fs/nilfs2/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index aad92f0a1048..6910a98bd73c 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -13,6 +13,7 @@
 #include <linux/parser.h>
 #include <linux/mount.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/statfs.h>
 #include "adfs.h"
 #include "dir_f.h"
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 9bd757774c9e..88067f36e5e7 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -564,7 +564,7 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
 static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
         struct afs_vnode *vnode, *dir;
-        struct afs_fid fid;
+        struct afs_fid uninitialized_var(fid);
         struct dentry *parent;
         struct key *key;
         void *dir_version;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index ad0514d0115f..e1ea1c240b6a 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/pagemap.h>
 #include <linux/parser.h>
diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c
index f3da2eb51f56..00bf8fcb245f 100644
--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -19,7 +19,6 @@
 #include <linux/sched.h>
 #include <linux/compat.h>
 #include <linux/syscalls.h>
-#include <linux/smp_lock.h>
 #include <linux/magic.h>
 #include <linux/dcache.h>
 #include <linux/uaccess.h>
diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c
index 54bd07d44e68..1e41aadb1068 100644
--- a/fs/bfs/dir.c
+++ b/fs/bfs/dir.c
@@ -8,7 +8,6 @@
 #include <linux/time.h>
 #include <linux/string.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/sched.h>
 #include "bfs.h"
diff --git a/fs/bfs/file.c b/fs/bfs/file.c
index 6a021265f018..88b9a3ff44e4 100644
--- a/fs/bfs/file.c
+++ b/fs/bfs/file.c
@@ -11,7 +11,6 @@
 
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include "bfs.h"
 
 #undef DEBUG
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 3a6d4fb2a329..94dfda24c06e 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -564,6 +564,16 @@ struct block_device *bdget(dev_t dev)
 
 EXPORT_SYMBOL(bdget);
 
+/**
+ * bdgrab -- Grab a reference to an already referenced block device
+ * @bdev:       Block device to grab a reference to.
+ */
+struct block_device *bdgrab(struct block_device *bdev)
+{
+        atomic_inc(&bdev->bd_inode->i_count);
+        return bdev;
+}
+
 long nr_blockdev_pages(void)
 {
         struct block_device *bdev;
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 6e4f6c50a120..019e8af449ab 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -424,11 +424,11 @@ int btrfs_requeue_work(struct btrfs_work *work)
          * list
          */
         if (worker->idle) {
-                spin_lock_irqsave(&worker->workers->lock, flags);
+                spin_lock(&worker->workers->lock);
                 worker->idle = 0;
                 list_move_tail(&worker->worker_list,
                                &worker->workers->worker_list);
-                spin_unlock_irqrestore(&worker->workers->lock, flags);
+                spin_unlock(&worker->workers->lock);
         }
         if (!worker->working) {
                 wake = 1;
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index de1e2fd32080..9d8ba4d54a37 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -26,7 +26,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 60a45f3a4e91..3fdcc0512d3a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -557,19 +557,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2)
 
         btrfs_disk_key_to_cpu(&k1, disk);
 
-        if (k1.objectid > k2->objectid)
-                return 1;
-        if (k1.objectid < k2->objectid)
-                return -1;
-        if (k1.type > k2->type)
-                return 1;
-        if (k1.type < k2->type)
-                return -1;
-        if (k1.offset > k2->offset)
-                return 1;
-        if (k1.offset < k2->offset)
-                return -1;
-        return 0;
+        return btrfs_comp_cpu_keys(&k1, k2);
 }
 
 /*
@@ -1052,9 +1040,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
             BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
                 return 0;
 
-        if (btrfs_header_nritems(mid) > 2)
-                return 0;
-
         if (btrfs_header_nritems(mid) < 2)
                 err_on_enospc = 1;
 
@@ -1701,6 +1686,7 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root
         struct extent_buffer *b;
         int slot;
         int ret;
+        int err;
         int level;
         int lowest_unlock = 1;
         u8 lowest_level = 0;
@@ -1737,8 +1723,6 @@ again:
                         p->locks[level] = 1;
 
                 if (cow) {
-                        int wret;
-
                         /*
                          * if we don't really need to cow this block
                          * then we don't want to set the path blocking,
@@ -1749,12 +1733,12 @@ again:
 
                         btrfs_set_path_blocking(p);
 
-                        wret = btrfs_cow_block(trans, root, b,
-                                               p->nodes[level + 1],
-                                               p->slots[level + 1], &b);
-                        if (wret) {
+                        err = btrfs_cow_block(trans, root, b,
+                                              p->nodes[level + 1],
+                                              p->slots[level + 1], &b);
+                        if (err) {
                                 free_extent_buffer(b);
-                                ret = wret;
+                                ret = err;
                                 goto done;
                         }
                 }
@@ -1793,41 +1777,45 @@ cow_done:
                 ret = bin_search(b, key, level, &slot);
 
                 if (level != 0) {
-                        if (ret && slot > 0)
+                        int dec = 0;
+                        if (ret && slot > 0) {
+                                dec = 1;
                                 slot -= 1;
+                        }
                         p->slots[level] = slot;
-                        ret = setup_nodes_for_search(trans, root, p, b, level,
+                        err = setup_nodes_for_search(trans, root, p, b, level,
                                                      ins_len);
-                        if (ret == -EAGAIN)
+                        if (err == -EAGAIN)
                                 goto again;
-                        else if (ret)
+                        if (err) {
+                                ret = err;
                                 goto done;
+                        }
                         b = p->nodes[level];
                         slot = p->slots[level];
 
                         unlock_up(p, level, lowest_unlock);
 
-                        /* this is only true while dropping a snapshot */
                         if (level == lowest_level) {
-                                ret = 0;
+                                if (dec)
+                                        p->slots[level]++;
                                 goto done;
                         }
 
-                        ret = read_block_for_search(trans, root, p,
+                        err = read_block_for_search(trans, root, p,
                                                     &b, level, slot, key);
-                        if (ret == -EAGAIN)
+                        if (err == -EAGAIN)
                                 goto again;
-
-                        if (ret == -EIO)
+                        if (err) {
+                                ret = err;
                                 goto done;
+                        }
 
                         if (!p->skip_locking) {
-                                int lret;
-
                                 btrfs_clear_path_blocking(p, NULL);
-                                lret = btrfs_try_spin_lock(b);
+                                err = btrfs_try_spin_lock(b);
 
-                                if (!lret) {
+                                if (!err) {
                                         btrfs_set_path_blocking(p);
                                         btrfs_tree_lock(b);
                                         btrfs_clear_path_blocking(p, b);
@@ -1837,16 +1825,14 @@ cow_done:
                         p->slots[level] = slot;
                         if (ins_len > 0 &&
                             btrfs_leaf_free_space(root, b) < ins_len) {
-                                int sret;
-
                                 btrfs_set_path_blocking(p);
-                                sret = split_leaf(trans, root, key,
-                                                      p, ins_len, ret == 0);
+                                err = split_leaf(trans, root, key,
+                                                 p, ins_len, ret == 0);
                                 btrfs_clear_path_blocking(p, NULL);
 
-                                BUG_ON(sret > 0);
-                                if (sret) {
-                                        ret = sret;
+                                BUG_ON(err > 0);
+                                if (err) {
+                                        ret = err;
                                         goto done;
                                 }
                         }
@@ -3807,7 +3793,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
                 }
 
                 /* delete the leaf if it is mostly empty */
-                if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
+                if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) {
                         /* push_leaf_left fixes the path.
                          * make sure the path still points to our leaf
                          * for possible call to del_ptr below
@@ -4042,10 +4028,9 @@ out:
  * calling this function.
  */
 int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
-                        struct btrfs_key *key, int lowest_level,
+                        struct btrfs_key *key, int level,
                         int cache_only, u64 min_trans)
 {
-        int level = lowest_level;
         int slot;
         struct extent_buffer *c;
 
@@ -4058,11 +4043,40 @@ int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
                 c = path->nodes[level];
 next:
                 if (slot >= btrfs_header_nritems(c)) {
-                        level++;
-                        if (level == BTRFS_MAX_LEVEL)
+                        int ret;
+                        int orig_lowest;
+                        struct btrfs_key cur_key;
+                        if (level + 1 >= BTRFS_MAX_LEVEL ||
+                            !path->nodes[level + 1])
                                 return 1;
-                        continue;
+
+                        if (path->locks[level + 1]) {
+                                level++;
+                                continue;
+                        }
+
+                        slot = btrfs_header_nritems(c) - 1;
+                        if (level == 0)
+                                btrfs_item_key_to_cpu(c, &cur_key, slot);
+                        else
+                                btrfs_node_key_to_cpu(c, &cur_key, slot);
+
+                        orig_lowest = path->lowest_level;
+                        btrfs_release_path(root, path);
+                        path->lowest_level = level;
+                        ret = btrfs_search_slot(NULL, root, &cur_key, path,
+                                                0, 0);
+                        path->lowest_level = orig_lowest;
+                        if (ret < 0)
+                                return ret;
+
+                        c = path->nodes[level];
+                        slot = path->slots[level];
+                        if (ret == 0)
+                                slot++;
+                        goto next;
                 }
+
                 if (level == 0)
                         btrfs_item_key_to_cpu(c, key, slot);
                 else {
@@ -4146,7 +4160,8 @@ again:
          * advance the path if there are now more items available.
          */
         if (nritems > 0 && path->slots[0] < nritems - 1) {
-                path->slots[0]++;
+                if (ret == 0)
+                        path->slots[0]++;
                 ret = 0;
                 goto done;
         }
@@ -4278,10 +4293,10 @@ int btrfs_previous_item(struct btrfs_root *root,
                         path->slots[0]--;
 
                 btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
-                if (found_key.type == type)
-                        return 0;
                 if (found_key.objectid < min_objectid)
                         break;
+                if (found_key.type == type)
+                        return 0;
                 if (found_key.objectid == min_objectid &&
                     found_key.type < type)
                         break;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 98a873838717..837435ce84ca 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -481,7 +481,7 @@ struct btrfs_shared_data_ref {
 
 struct btrfs_extent_inline_ref {
         u8 type;
-        u64 offset;
+        __le64 offset;
 } __attribute__ ((__packed__));
 
 /* old style backrefs item */
@@ -689,6 +689,7 @@ struct btrfs_space_info {
         struct list_head block_groups;
         spinlock_t lock;
         struct rw_semaphore groups_sem;
+        atomic_t caching_threads;
 };
 
 /*
@@ -707,6 +708,9 @@ struct btrfs_free_cluster {
         /* first extent starting offset */
         u64 window_start;
 
+        /* if this cluster simply points at a bitmap in the block group */
+        bool points_to_bitmap;
+
         struct btrfs_block_group_cache *block_group;
         /*
          * when a cluster is allocated from a block group, we put the
@@ -716,24 +720,37 @@ struct btrfs_free_cluster {
         struct list_head block_group_list;
 };
 
+enum btrfs_caching_type {
+        BTRFS_CACHE_NO          = 0,
+        BTRFS_CACHE_STARTED     = 1,
+        BTRFS_CACHE_FINISHED    = 2,
+};
+
 struct btrfs_block_group_cache {
         struct btrfs_key key;
         struct btrfs_block_group_item item;
+        struct btrfs_fs_info *fs_info;
         spinlock_t lock;
-        struct mutex cache_mutex;
         u64 pinned;
         u64 reserved;
         u64 flags;
-        int cached;
+        u64 sectorsize;
+        int extents_thresh;
+        int free_extents;
+        int total_bitmaps;
         int ro;
         int dirty;
 
+        /* cache tracking stuff */
+        wait_queue_head_t caching_q;
+        int cached;
+
         struct btrfs_space_info *space_info;
 
         /* free space cache stuff */
         spinlock_t tree_lock;
-        struct rb_root free_space_bytes;
         struct rb_root free_space_offset;
+        u64 free_space;
 
         /* block group cache stuff */
         struct rb_node cache_node;
@@ -808,6 +825,7 @@ struct btrfs_fs_info {
         struct mutex drop_mutex;
         struct mutex volume_mutex;
         struct mutex tree_reloc_mutex;
+        struct rw_semaphore extent_commit_sem;
 
         /*
          * this protects the ordered operations list only while we are
@@ -1988,6 +2006,7 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
                                  u64 bytes);
 void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
                               u64 bytes);
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
 /* ctree.c */
 int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
                      int level, int *slot);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d28d29c95f7c..e83be2e4602c 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1639,6 +1639,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
         mutex_init(&fs_info->cleaner_mutex);
         mutex_init(&fs_info->volume_mutex);
         mutex_init(&fs_info->tree_reloc_mutex);
+        init_rwsem(&fs_info->extent_commit_sem);
 
         btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
         btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
@@ -1799,6 +1800,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
                                            btrfs_super_chunk_root(disk_super),
                                            blocksize, generation);
         BUG_ON(!chunk_root->node);
+        if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
+                printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
+                       sb->s_id);
+                goto fail_chunk_root;
+        }
         btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
         chunk_root->commit_root = btrfs_root_node(chunk_root);
 
@@ -1826,6 +1832,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
                                           blocksize, generation);
         if (!tree_root->node)
                 goto fail_chunk_root;
+        if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+                printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
+                       sb->s_id);
+                goto fail_tree_root;
+        }
         btrfs_set_root_node(&tree_root->root_item, tree_root->node);
         tree_root->commit_root = btrfs_root_node(tree_root);
 
@@ -2322,6 +2333,9 @@ int close_ctree(struct btrfs_root *root)
                         printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
         }
 
+        fs_info->closing = 2;
+        smp_mb();
+
         if (fs_info->delalloc_bytes) {
                 printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
                        (unsigned long long)fs_info->delalloc_bytes);
@@ -2343,6 +2357,7 @@ int close_ctree(struct btrfs_root *root)
         free_extent_buffer(root->fs_info->csum_root->commit_root);
 
         btrfs_free_block_groups(root->fs_info);
+        btrfs_free_pinned_extents(root->fs_info);
 
         del_fs_roots(fs_info);
 
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index a5aca3997d42..dc84daee6bc4 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -21,6 +21,7 @@
 #include <linux/blkdev.h>
 #include <linux/sort.h>
 #include <linux/rcupdate.h>
+#include <linux/kthread.h>
 #include "compat.h"
 #include "hash.h"
 #include "ctree.h"
@@ -61,6 +62,13 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
                           struct btrfs_root *extent_root, u64 alloc_bytes,
                           u64 flags, int force);
 
+static noinline int
+block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+        smp_mb();
+        return cache->cached == BTRFS_CACHE_FINISHED;
+}
+
 static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
 {
         return (cache->flags & bits) == bits;
@@ -146,20 +154,70 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr,
 }
 
 /*
+ * We always set EXTENT_LOCKED for the super mirror extents so we don't
+ * overwrite them, so those bits need to be unset.  Also, if we are unmounting
+ * with pinned extents still sitting there because we had a block group caching,
+ * we need to clear those now, since we are done.
+ */
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+{
+        u64 start, end, last = 0;
+        int ret;
+
+        while (1) {
+                ret = find_first_extent_bit(&info->pinned_extents, last,
+                                            &start, &end,
+                                            EXTENT_LOCKED|EXTENT_DIRTY);
+                if (ret)
+                        break;
+
+                clear_extent_bits(&info->pinned_extents, start, end,
+                                  EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
+                last = end+1;
+        }
+}
+
+static int remove_sb_from_cache(struct btrfs_root *root,
+                                struct btrfs_block_group_cache *cache)
+{
+        struct btrfs_fs_info *fs_info = root->fs_info;
+        u64 bytenr;
+        u64 *logical;
+        int stripe_len;
+        int i, nr, ret;
+
+        for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
+                bytenr = btrfs_sb_offset(i);
+                ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
+                                       cache->key.objectid, bytenr,
+                                       0, &logical, &nr, &stripe_len);
+                BUG_ON(ret);
+                while (nr--) {
+                        try_lock_extent(&fs_info->pinned_extents,
+                                        logical[nr],
+                                        logical[nr] + stripe_len - 1, GFP_NOFS);
+                }
+                kfree(logical);
+        }
+
+        return 0;
+}
+
+/*
  * this is only called by cache_block_group, since we could have freed extents
  * we need to check the pinned_extents for any extents that can't be used yet
  * since their free space will be released as soon as the transaction commits.
  */
-static int add_new_free_space(struct btrfs_block_group_cache *block_group,
+static u64 add_new_free_space(struct btrfs_block_group_cache *block_group,
                               struct btrfs_fs_info *info, u64 start, u64 end)
 {
-        u64 extent_start, extent_end, size;
+        u64 extent_start, extent_end, size, total_added = 0;
         int ret;
 
         while (start < end) {
                 ret = find_first_extent_bit(&info->pinned_extents, start,
                                             &extent_start, &extent_end,
-                                            EXTENT_DIRTY);
+                                            EXTENT_DIRTY|EXTENT_LOCKED);
                 if (ret)
                         break;
 
@@ -167,6 +225,7 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
                         start = extent_end + 1;
                 } else if (extent_start > start && extent_start < end) {
                         size = extent_start - start;
+                        total_added += size;
                         ret = btrfs_add_free_space(block_group, start,
                                                    size);
                         BUG_ON(ret);
@@ -178,84 +237,80 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
 
         if (start < end) {
                 size = end - start;
+                total_added += size;
                 ret = btrfs_add_free_space(block_group, start, size);
                 BUG_ON(ret);
         }
 
-        return 0;
+        return total_added;
 }
 
-static int remove_sb_from_cache(struct btrfs_root *root,
-                                struct btrfs_block_group_cache *cache)
-{
-        u64 bytenr;
-        u64 *logical;
-        int stripe_len;
-        int i, nr, ret;
-
-        for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
-                bytenr = btrfs_sb_offset(i);
-                ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
-                                       cache->key.objectid, bytenr, 0,
-                                       &logical, &nr, &stripe_len);
-                BUG_ON(ret);
-                while (nr--) {
-                        btrfs_remove_free_space(cache, logical[nr],
-                                                stripe_len);
-                }
-                kfree(logical);
-        }
-        return 0;
-}
-
-static int cache_block_group(struct btrfs_root *root,
-                             struct btrfs_block_group_cache *block_group)
+static int caching_kthread(void *data)
 {
+        struct btrfs_block_group_cache *block_group = data;
+        struct btrfs_fs_info *fs_info = block_group->fs_info;
+        u64 last = 0;
         struct btrfs_path *path;
         int ret = 0;
         struct btrfs_key key;
         struct extent_buffer *leaf;
         int slot;
-        u64 last;
-
-        if (!block_group)
-                return 0;
+        u64 total_found = 0;
 
-        root = root->fs_info->extent_root;
-
-        if (block_group->cached)
-                return 0;
+        BUG_ON(!fs_info);
 
         path = btrfs_alloc_path();
         if (!path)
                 return -ENOMEM;
 
-        path->reada = 2;
+        atomic_inc(&block_group->space_info->caching_threads);
+        last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+again:
+        /* need to make sure the commit_root doesn't disappear */
+        down_read(&fs_info->extent_commit_sem);
+
         /*
-         * we get into deadlocks with paths held by callers of this function.
-         * since the alloc_mutex is protecting things right now, just
-         * skip the locking here
+         * We don't want to deadlock with somebody trying to allocate a new
+         * extent for the extent root while also trying to search the extent
+         * root to add free space.  So we skip locking and search the commit
+         * root, since its read-only
          */
         path->skip_locking = 1;
-        last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+        path->search_commit_root = 1;
+        path->reada = 2;
+
         key.objectid = last;
         key.offset = 0;
         btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
-        ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+        ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
         if (ret < 0)
                 goto err;
 
         while (1) {
+                smp_mb();
+                if (block_group->fs_info->closing > 1) {
+                        last = (u64)-1;
+                        break;
+                }
+
                 leaf = path->nodes[0];
                 slot = path->slots[0];
                 if (slot >= btrfs_header_nritems(leaf)) {
-                        ret = btrfs_next_leaf(root, path);
+                        ret = btrfs_next_leaf(fs_info->extent_root, path);
                         if (ret < 0)
                                 goto err;
-                        if (ret == 0)
-                                continue;
-                        else
+                        else if (ret)
                                 break;
+
+                        if (need_resched() ||
+                            btrfs_transaction_in_commit(fs_info)) {
+                                btrfs_release_path(fs_info->extent_root, path);
+                                up_read(&fs_info->extent_commit_sem);
+                                schedule_timeout(1);
+                                goto again;
+                        }
+
+                        continue;
                 }
                 btrfs_item_key_to_cpu(leaf, &key, slot);
                 if (key.objectid < block_group->key.objectid)
@@ -266,24 +321,59 @@ static int cache_block_group(struct btrfs_root *root,
                         break;
 
                 if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
-                        add_new_free_space(block_group, root->fs_info, last,
-                                           key.objectid);
-
+                        total_found += add_new_free_space(block_group,
+                                                          fs_info, last,
+                                                          key.objectid);
                         last = key.objectid + key.offset;
                 }
+
+                if (total_found > (1024 * 1024 * 2)) {
+                        total_found = 0;
+                        wake_up(&block_group->caching_q);
+                }
 next:
                 path->slots[0]++;
         }
+        ret = 0;
 
-        add_new_free_space(block_group, root->fs_info, last,
-                           block_group->key.objectid +
-                           block_group->key.offset);
+        total_found += add_new_free_space(block_group, fs_info, last,
+                                          block_group->key.objectid +
+                                          block_group->key.offset);
+
+        spin_lock(&block_group->lock);
+        block_group->cached = BTRFS_CACHE_FINISHED;
+        spin_unlock(&block_group->lock);
 
-        block_group->cached = 1;
-        remove_sb_from_cache(root, block_group);
-        ret = 0;
 err:
         btrfs_free_path(path);
+        up_read(&fs_info->extent_commit_sem);
+        atomic_dec(&block_group->space_info->caching_threads);
+        wake_up(&block_group->caching_q);
+
+        return 0;
+}
+
+static int cache_block_group(struct btrfs_block_group_cache *cache)
+{
+        struct task_struct *tsk;
+        int ret = 0;
+
+        spin_lock(&cache->lock);
+        if (cache->cached != BTRFS_CACHE_NO) {
+                spin_unlock(&cache->lock);
+                return ret;
+        }
+        cache->cached = BTRFS_CACHE_STARTED;
+        spin_unlock(&cache->lock);
+
+        tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
+                          cache->key.objectid);
+        if (IS_ERR(tsk)) {
+                ret = PTR_ERR(tsk);
+                printk(KERN_ERR "error running thread %d\n", ret);
+                BUG();
+        }
+
         return ret;
 }
 
@@ -2387,13 +2477,29 @@ fail:
 
 }
 
+static struct btrfs_block_group_cache *
+next_block_group(struct btrfs_root *root,
+                 struct btrfs_block_group_cache *cache)
+{
+        struct rb_node *node;
+        spin_lock(&root->fs_info->block_group_cache_lock);
+        node = rb_next(&cache->cache_node);
+        btrfs_put_block_group(cache);
+        if (node) {
+                cache = rb_entry(node, struct btrfs_block_group_cache,
+                                 cache_node);
+                atomic_inc(&cache->count);
+        } else
+                cache = NULL;
+        spin_unlock(&root->fs_info->block_group_cache_lock);
+        return cache;
+}
+
 int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
                                    struct btrfs_root *root)
 {
-        struct btrfs_block_group_cache *cache, *entry;
-        struct rb_node *n;
+        struct btrfs_block_group_cache *cache;
         int err = 0;
-        int werr = 0;
         struct btrfs_path *path;
         u64 last = 0;
 
@@ -2402,39 +2508,35 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
                 return -ENOMEM;
 
         while (1) {
-                cache = NULL;
-                spin_lock(&root->fs_info->block_group_cache_lock);
-                for (n = rb_first(&root->fs_info->block_group_cache_tree);
-                     n; n = rb_next(n)) {
-                        entry = rb_entry(n, struct btrfs_block_group_cache,
-                                         cache_node);
-                        if (entry->dirty) {
-                                cache = entry;
-                                break;
-                        }
+                if (last == 0) {
+                        err = btrfs_run_delayed_refs(trans, root,
+                                                     (unsigned long)-1);
+                        BUG_ON(err);
                 }
-                spin_unlock(&root->fs_info->block_group_cache_lock);
 
-                if (!cache)
-                        break;
+                cache = btrfs_lookup_first_block_group(root->fs_info, last);
+                while (cache) {
+                        if (cache->dirty)
+                                break;
+                        cache = next_block_group(root, cache);
+                }
+                if (!cache) {
+                        if (last == 0)
+                                break;
+                        last = 0;
+                        continue;
+                }
 
                 cache->dirty = 0;
-                last += cache->key.offset;
+                last = cache->key.objectid + cache->key.offset;
 
-                err = write_one_cache_group(trans, root,
-                                            path, cache);
-                /*
-                 * if we fail to write the cache group, we want
-                 * to keep it marked dirty in hopes that a later
-                 * write will work
-                 */
-                if (err) {
-                        werr = err;
-                        continue;
-                }
+                err = write_one_cache_group(trans, root, path, cache);
+                BUG_ON(err);
+                btrfs_put_block_group(cache);
         }
+
         btrfs_free_path(path);
-        return werr;
+        return 0;
 }
 
 int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr)
@@ -2484,6 +2586,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
         found->force_alloc = 0;
         *space_info = found;
         list_add_rcu(&found->list, &info->space_info);
+        atomic_set(&found->caching_threads, 0);
         return 0;
 }
 
@@ -2947,13 +3050,9 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
         struct btrfs_block_group_cache *cache;
         struct btrfs_fs_info *fs_info = root->fs_info;
 
-        if (pin) {
+        if (pin)
                 set_extent_dirty(&fs_info->pinned_extents,
                                 bytenr, bytenr + num - 1, GFP_NOFS);
-        } else {
-                clear_extent_dirty(&fs_info->pinned_extents,
-                                bytenr, bytenr + num - 1, GFP_NOFS);
-        }
 
         while (num > 0) {
                 cache = btrfs_lookup_block_group(fs_info, bytenr);
@@ -2969,14 +3068,34 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
                         spin_unlock(&cache->space_info->lock);
                         fs_info->total_pinned += len;
                 } else {
+                        int unpin = 0;
+
+                        /*
+                         * in order to not race with the block group caching, we
+                         * only want to unpin the extent if we are cached.  If
+                         * we aren't cached, we want to start async caching this
+                         * block group so we can free the extent the next time
+                         * around.
+                         */
                         spin_lock(&cache->space_info->lock);
                         spin_lock(&cache->lock);
-                        cache->pinned -= len;
-                        cache->space_info->bytes_pinned -= len;
+                        unpin = (cache->cached == BTRFS_CACHE_FINISHED);
+                        if (likely(unpin)) {
+                                cache->pinned -= len;
+                                cache->space_info->bytes_pinned -= len;
+                                fs_info->total_pinned -= len;
+                        }
                         spin_unlock(&cache->lock);
                         spin_unlock(&cache->space_info->lock);
-                        fs_info->total_pinned -= len;
-                        if (cache->cached)
+
+                        if (likely(unpin))
+                                clear_extent_dirty(&fs_info->pinned_extents,
+                                                   bytenr, bytenr + len -1,
+                                                   GFP_NOFS);
+                        else
+                                cache_block_group(cache);
+
+                        if (unpin)
                                 btrfs_add_free_space(cache, bytenr, len);
                 }
                 btrfs_put_block_group(cache);
@@ -3030,6 +3149,7 @@ int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy)
                                             &start, &end, EXTENT_DIRTY);
                 if (ret)
                         break;
+
                 set_extent_dirty(copy, start, end, GFP_NOFS);
                 last = end + 1;
         }
@@ -3058,6 +3178,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 
                 cond_resched();
         }
+
         return ret;
 }
 
@@ -3436,6 +3557,45 @@ static u64 stripe_align(struct btrfs_root *root, u64 val)
 }
 
 /*
+ * when we wait for progress in the block group caching, its because
+ * our allocation attempt failed at least once.  So, we must sleep
+ * and let some progress happen before we try again.
+ *
+ * This function will sleep at least once waiting for new free space to
+ * show up, and then it will check the block group free space numbers
+ * for our min num_bytes.  Another option is to have it go ahead
+ * and look in the rbtree for a free extent of a given size, but this
+ * is a good start.
+ */
+static noinline int
+wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
+                                u64 num_bytes)
+{
+        DEFINE_WAIT(wait);
+
+        prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
+
+        if (block_group_cache_done(cache)) {
+                finish_wait(&cache->caching_q, &wait);
+                return 0;
+        }
+        schedule();
+        finish_wait(&cache->caching_q, &wait);
+
+        wait_event(cache->caching_q, block_group_cache_done(cache) ||
+                   (cache->free_space >= num_bytes));
+        return 0;
+}
+
+enum btrfs_loop_type {
+        LOOP_CACHED_ONLY = 0,
+        LOOP_CACHING_NOWAIT = 1,
+        LOOP_CACHING_WAIT = 2,
+        LOOP_ALLOC_CHUNK = 3,
+        LOOP_NO_EMPTY_SIZE = 4,
+};
+
+/*
  * walks the btree of allocated extents and find a hole of a given size.
  * The key ins is changed to record the hole:
  * ins->objectid == block start
@@ -3460,6 +3620,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
         struct btrfs_space_info *space_info;
         int last_ptr_loop = 0;
         int loop = 0;
+        bool found_uncached_bg = false;
 
         WARN_ON(num_bytes < root->sectorsize);
         btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
@@ -3491,15 +3652,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
         search_start = max(search_start, first_logical_byte(root, 0));
         search_start = max(search_start, hint_byte);
 
-        if (!last_ptr) {
+        if (!last_ptr)
                 empty_cluster = 0;
-                loop = 1;
-        }
 
         if (search_start == hint_byte) {
                 block_group = btrfs_lookup_block_group(root->fs_info,
                                                        search_start);
-                if (block_group && block_group_bits(block_group, data)) {
+                /*
+                 * we don't want to use the block group if it doesn't match our
+                 * allocation bits, or if its not cached.
+                 */
+                if (block_group && block_group_bits(block_group, data) &&
+                    block_group_cache_done(block_group)) {
                         down_read(&space_info->groups_sem);
                         if (list_empty(&block_group->list) ||
                             block_group->ro) {
@@ -3522,21 +3686,35 @@ search:
         down_read(&space_info->groups_sem);
         list_for_each_entry(block_group, &space_info->block_groups, list) {
                 u64 offset;
+                int cached;
 
                 atomic_inc(&block_group->count);
                 search_start = block_group->key.objectid;
 
 have_block_group:
-                if (unlikely(!block_group->cached)) {
-                        mutex_lock(&block_group->cache_mutex);
-                        ret = cache_block_group(root, block_group);
-                        mutex_unlock(&block_group->cache_mutex);
-                        if (ret) {
-                                btrfs_put_block_group(block_group);
-                                break;
+                if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+                        /*
+                         * we want to start caching kthreads, but not too many
+                         * right off the bat so we don't overwhelm the system,
+                         * so only start them if there are less than 2 and we're
+                         * in the initial allocation phase.
+                         */
+                        if (loop > LOOP_CACHING_NOWAIT ||
+                            atomic_read(&space_info->caching_threads) < 2) {
+                                ret = cache_block_group(block_group);
+                                BUG_ON(ret);
                         }
                 }
 
+                cached = block_group_cache_done(block_group);
+                if (unlikely(!cached)) {
+                        found_uncached_bg = true;
+
+                        /* if we only want cached bgs, loop */
+                        if (loop == LOOP_CACHED_ONLY)
+                                goto loop;
+                }
+
                 if (unlikely(block_group->ro))
                         goto loop;
 
@@ -3615,14 +3793,21 @@ refill_cluster:
                                         spin_unlock(&last_ptr->refill_lock);
                                         goto checks;
                                 }
+                        } else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+                                spin_unlock(&last_ptr->refill_lock);
+
+                                wait_block_group_cache_progress(block_group,
+                                       num_bytes + empty_cluster + empty_size);
+                                goto have_block_group;
                         }
+
                         /*
                          * at this point we either didn't find a cluster
                          * or we weren't able to allocate a block from our
                          * cluster.  Free the cluster we've been trying
                          * to use, and go to the next block group
                          */
-                        if (loop < 2) {
+                        if (loop < LOOP_NO_EMPTY_SIZE) {
                                 btrfs_return_cluster_to_free_space(NULL,
                                                                    last_ptr);
                                 spin_unlock(&last_ptr->refill_lock);
@@ -3633,11 +3818,17 @@ refill_cluster:
 
                 offset = btrfs_find_space_for_alloc(block_group, search_start,
                                                     num_bytes, empty_size);
-                if (!offset)
+                if (!offset && (cached || (!cached &&
+                                           loop == LOOP_CACHING_NOWAIT))) {
                         goto loop;
+                } else if (!offset && (!cached &&
+                                       loop > LOOP_CACHING_NOWAIT)) {
+                        wait_block_group_cache_progress(block_group,
+                                        num_bytes + empty_size);
+                        goto have_block_group;
+                }
 checks:
                 search_start = stripe_align(root, offset);
-
                 /* move on to the next group */
                 if (search_start + num_bytes >= search_end) {
                         btrfs_add_free_space(block_group, offset, num_bytes);
@@ -3683,13 +3874,26 @@ loop:
         }
         up_read(&space_info->groups_sem);
 
-        /* loop == 0, try to find a clustered alloc in every block group
-         * loop == 1, try again after forcing a chunk allocation
-         * loop == 2, set empty_size and empty_cluster to 0 and try again
+        /* LOOP_CACHED_ONLY, only search fully cached block groups
+         * LOOP_CACHING_NOWAIT, search partially cached block groups, but
+         *                      dont wait foR them to finish caching
+         * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
+         * LOOP_ALLOC_CHUNK, force a chunk allocation and try again
+         * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
+         *                      again
          */
-        if (!ins->objectid && loop < 3 &&
-            (empty_size || empty_cluster || allowed_chunk_alloc)) {
-                if (loop >= 2) {
+        if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
+            (found_uncached_bg || empty_size || empty_cluster ||
+             allowed_chunk_alloc)) {
+                if (found_uncached_bg) {
+                        found_uncached_bg = false;
+                        if (loop < LOOP_CACHING_WAIT) {
+                                loop++;
+                                goto search;
+                        }
+                }
+
+                if (loop == LOOP_ALLOC_CHUNK) {
                         empty_size = 0;
                         empty_cluster = 0;
                 }
@@ -3702,7 +3906,7 @@ loop:
                         space_info->force_alloc = 1;
                 }
 
-                if (loop < 3) {
+                if (loop < LOOP_NO_EMPTY_SIZE) {
                         loop++;
                         goto search;
                 }
@@ -3798,7 +4002,7 @@ again:
                                num_bytes, data, 1);
                 goto again;
         }
-        if (ret) {
+        if (ret == -ENOSPC) {
                 struct btrfs_space_info *sinfo;
 
                 sinfo = __find_space_info(root->fs_info, data);
@@ -3806,7 +4010,6 @@ again:
                        "wanted %llu\n", (unsigned long long)data,
                        (unsigned long long)num_bytes);
                 dump_space_info(sinfo, num_bytes);
-                BUG();
         }
 
         return ret;
@@ -3844,7 +4047,9 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
         ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
                                      empty_size, hint_byte, search_end, ins,
                                      data);
-        update_reserved_extents(root, ins->objectid, ins->offset, 1);
+        if (!ret)
+                update_reserved_extents(root, ins->objectid, ins->offset, 1);
+
         return ret;
 }
 
@@ -4006,9 +4211,9 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
         struct btrfs_block_group_cache *block_group;
 
         block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
-        mutex_lock(&block_group->cache_mutex);
-        cache_block_group(root, block_group);
-        mutex_unlock(&block_group->cache_mutex);
+        cache_block_group(block_group);
+        wait_event(block_group->caching_q,
+                   block_group_cache_done(block_group));
 
         ret = btrfs_remove_free_space(block_group, ins->objectid,
                                       ins->offset);
@@ -4039,7 +4244,8 @@ static int alloc_tree_block(struct btrfs_trans_handle *trans,
         ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
                                      empty_size, hint_byte, search_end,
                                      ins, 0);
-        BUG_ON(ret);
+        if (ret)
+                return ret;
 
         if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
                 if (parent == 0)
@@ -6955,11 +7161,16 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info)
                          &info->block_group_cache_tree);
                 spin_unlock(&info->block_group_cache_lock);
 
-                btrfs_remove_free_space_cache(block_group);
                 down_write(&block_group->space_info->groups_sem);
                 list_del(&block_group->list);
                 up_write(&block_group->space_info->groups_sem);
 
+                if (block_group->cached == BTRFS_CACHE_STARTED)
+                        wait_event(block_group->caching_q,
+                                   block_group_cache_done(block_group));
+
+                btrfs_remove_free_space_cache(block_group);
+
                 WARN_ON(atomic_read(&block_group->count) != 1);
                 kfree(block_group);
 
@@ -7025,9 +7236,19 @@ int btrfs_read_block_groups(struct btrfs_root *root)
                 atomic_set(&cache->count, 1);
                 spin_lock_init(&cache->lock);
                 spin_lock_init(&cache->tree_lock);
-                mutex_init(&cache->cache_mutex);
+                cache->fs_info = info;
+                init_waitqueue_head(&cache->caching_q);
                 INIT_LIST_HEAD(&cache->list);
                 INIT_LIST_HEAD(&cache->cluster_list);
+
+                /*
+                 * we only want to have 32k of ram per block group for keeping
+                 * track of free space, and if we pass 1/2 of that we want to
+                 * start converting things over to using bitmaps
+                 */
+                cache->extents_thresh = ((1024 * 32) / 2) /
+                        sizeof(struct btrfs_free_space);
+
                 read_extent_buffer(leaf, &cache->item,
                                    btrfs_item_ptr_offset(leaf, path->slots[0]),
                                    sizeof(cache->item));
@@ -7036,6 +7257,26 @@ int btrfs_read_block_groups(struct btrfs_root *root)
                 key.objectid = found_key.objectid + found_key.offset;
                 btrfs_release_path(root, path);
                 cache->flags = btrfs_block_group_flags(&cache->item);
+                cache->sectorsize = root->sectorsize;
+
+                remove_sb_from_cache(root, cache);
+
+                /*
+                 * check for two cases, either we are full, and therefore
+                 * don't need to bother with the caching work since we won't
+                 * find any space, or we are empty, and we can just add all
+                 * the space in and be done with it.  This saves us _alot_ of
+                 * time, particularly in the full case.
+                 */
+                if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+                        cache->cached = BTRFS_CACHE_FINISHED;
+                } else if (btrfs_block_group_used(&cache->item) == 0) {
+                        cache->cached = BTRFS_CACHE_FINISHED;
+                        add_new_free_space(cache, root->fs_info,
+                                           found_key.objectid,
+                                           found_key.objectid +
+                                           found_key.offset);
+                }
 
                 ret = update_space_info(info, cache->flags, found_key.offset,
                                         btrfs_block_group_used(&cache->item),
@@ -7079,10 +7320,19 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
         cache->key.objectid = chunk_offset;
         cache->key.offset = size;
         cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
+        cache->sectorsize = root->sectorsize;
+
+        /*
+         * we only want to have 32k of ram per block group for keeping track
+         * of free space, and if we pass 1/2 of that we want to start
+         * converting things over to using bitmaps
+         */
+        cache->extents_thresh = ((1024 * 32) / 2) /
+                sizeof(struct btrfs_free_space);
         atomic_set(&cache->count, 1);
         spin_lock_init(&cache->lock);
         spin_lock_init(&cache->tree_lock);
-        mutex_init(&cache->cache_mutex);
+        init_waitqueue_head(&cache->caching_q);
         INIT_LIST_HEAD(&cache->list);
         INIT_LIST_HEAD(&cache->cluster_list);
 
@@ -7091,6 +7341,12 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
         cache->flags = type;
         btrfs_set_block_group_flags(&cache->item, type);
 
+        cache->cached = BTRFS_CACHE_FINISHED;
+        remove_sb_from_cache(root, cache);
+
+        add_new_free_space(cache, root->fs_info, chunk_offset,
+                           chunk_offset + size);
+
         ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
                                 &cache->space_info);
         BUG_ON(ret);
@@ -7149,7 +7405,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
         rb_erase(&block_group->cache_node,
                  &root->fs_info->block_group_cache_tree);
         spin_unlock(&root->fs_info->block_group_cache_lock);
-        btrfs_remove_free_space_cache(block_group);
+
         down_write(&block_group->space_info->groups_sem);
         /*
          * we must use list_del_init so people can check to see if they
@@ -7158,11 +7414,18 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
         list_del_init(&block_group->list);
         up_write(&block_group->space_info->groups_sem);
 
+        if (block_group->cached == BTRFS_CACHE_STARTED)
+                wait_event(block_group->caching_q,
+                           block_group_cache_done(block_group));
+
+        btrfs_remove_free_space_cache(block_group);
+
         spin_lock(&block_group->space_info->lock);
         block_group->space_info->total_bytes -= block_group->key.offset;
         block_group->space_info->bytes_readonly -= block_group->key.offset;
         spin_unlock(&block_group->space_info->lock);
-        block_group->space_info->full = 0;
+
+        btrfs_clear_space_info_full(root->fs_info);
 
         btrfs_put_block_group(block_group);
         btrfs_put_block_group(block_group);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 7c3cd248d8d6..4b833972273a 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -22,7 +22,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 4538e48581a5..af99b78b288e 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -16,45 +16,46 @@
  * Boston, MA 021110-1307, USA.
  */
 
+#include <linux/pagemap.h>
 #include <linux/sched.h>
+#include <linux/math64.h>
 #include "ctree.h"
 #include "free-space-cache.h"
 #include "transaction.h"
 
-struct btrfs_free_space {
-        struct rb_node bytes_index;
-        struct rb_node offset_index;
-        u64 offset;
-        u64 bytes;
-};
+#define BITS_PER_BITMAP         (PAGE_CACHE_SIZE * 8)
+#define MAX_CACHE_BYTES_PER_GIG (32 * 1024)
 
-static int tree_insert_offset(struct rb_root *root, u64 offset,
-                              struct rb_node *node)
+static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
+                                          u64 offset)
 {
-        struct rb_node **p = &root->rb_node;
-        struct rb_node *parent = NULL;
-        struct btrfs_free_space *info;
+        BUG_ON(offset < bitmap_start);
+        offset -= bitmap_start;
+        return (unsigned long)(div64_u64(offset, sectorsize));
+}
 
-        while (*p) {
-                parent = *p;
-                info = rb_entry(parent, struct btrfs_free_space, offset_index);
+static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize)
+{
+        return (unsigned long)(div64_u64(bytes, sectorsize));
+}
 
-                if (offset < info->offset)
-                        p = &(*p)->rb_left;
-                else if (offset > info->offset)
-                        p = &(*p)->rb_right;
-                else
-                        return -EEXIST;
-        }
+static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group,
+                                   u64 offset)
+{
+        u64 bitmap_start;
+        u64 bytes_per_bitmap;
 
-        rb_link_node(node, parent, p);
-        rb_insert_color(node, root);
+        bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize;
+        bitmap_start = offset - block_group->key.objectid;
+        bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
+        bitmap_start *= bytes_per_bitmap;
+        bitmap_start += block_group->key.objectid;
 
-        return 0;
+        return bitmap_start;
 }
 
-static int tree_insert_bytes(struct rb_root *root, u64 bytes,
-                             struct rb_node *node)
+static int tree_insert_offset(struct rb_root *root, u64 offset,
+                              struct rb_node *node, int bitmap)
 {
         struct rb_node **p = &root->rb_node;
         struct rb_node *parent = NULL;
@@ -62,12 +63,34 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 
         while (*p) {
                 parent = *p;
-                info = rb_entry(parent, struct btrfs_free_space, bytes_index);
+                info = rb_entry(parent, struct btrfs_free_space, offset_index);
 
-                if (bytes < info->bytes)
+                if (offset < info->offset) {
                         p = &(*p)->rb_left;
-                else
+                } else if (offset > info->offset) {
                         p = &(*p)->rb_right;
+                } else {
+                        /*
+                         * we could have a bitmap entry and an extent entry
+                         * share the same offset.  If this is the case, we want
+                         * the extent entry to always be found first if we do a
+                         * linear search through the tree, since we want to have
+                         * the quickest allocation time, and allocating from an
+                         * extent is faster than allocating from a bitmap.  So
+                         * if we're inserting a bitmap and we find an entry at
+                         * this offset, we want to go right, or after this entry
+                         * logically.  If we are inserting an extent and we've
+                         * found a bitmap, we want to go left, or before
+                         * logically.
+                         */
+                        if (bitmap) {
+                                WARN_ON(info->bitmap);
+                                p = &(*p)->rb_right;
+                        } else {
+                                WARN_ON(!info->bitmap);
+                                p = &(*p)->rb_left;
+                        }
+                }
         }
 
         rb_link_node(node, parent, p);
@@ -79,110 +102,143 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 /*
  * searches the tree for the given offset.
  *
- * fuzzy == 1: this is used for allocations where we are given a hint of where
- * to look for free space.  Because the hint may not be completely on an offset
- * mark, or the hint may no longer point to free space we need to fudge our
- * results a bit.  So we look for free space starting at or after offset with at
- * least bytes size.  We prefer to find as close to the given offset as we can.
- * Also if the offset is within a free space range, then we will return the free
- * space that contains the given offset, which means we can return a free space
- * chunk with an offset before the provided offset.
- *
- * fuzzy == 0: this is just a normal tree search.  Give us the free space that
- * starts at the given offset which is at least bytes size, and if its not there
- * return NULL.
+ * fuzzy - If this is set, then we are trying to make an allocation, and we just
+ * want a section that has at least bytes size and comes at or after the given
+ * offset.
  */
-static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
-                                                   u64 offset, u64 bytes,
-                                                   int fuzzy)
+static struct btrfs_free_space *
+tree_search_offset(struct btrfs_block_group_cache *block_group,
+                   u64 offset, int bitmap_only, int fuzzy)
 {
-        struct rb_node *n = root->rb_node;
-        struct btrfs_free_space *entry, *ret = NULL;
+        struct rb_node *n = block_group->free_space_offset.rb_node;
+        struct btrfs_free_space *entry, *prev = NULL;
+
+        /* find entry that is closest to the 'offset' */
+        while (1) {
+                if (!n) {
+                        entry = NULL;
+                        break;
+                }
 
-        while (n) {
                 entry = rb_entry(n, struct btrfs_free_space, offset_index);
+                prev = entry;
 
-                if (offset < entry->offset) {
-                        if (fuzzy &&
-                            (!ret || entry->offset < ret->offset) &&
-                            (bytes <= entry->bytes))
-                                ret = entry;
+                if (offset < entry->offset)
                         n = n->rb_left;
-                } else if (offset > entry->offset) {
-                        if (fuzzy &&
-                            (entry->offset + entry->bytes - 1) >= offset &&
-                            bytes <= entry->bytes) {
-                                ret = entry;
-                                break;
-                        }
+                else if (offset > entry->offset)
                         n = n->rb_right;
-                } else {
-                        if (bytes > entry->bytes) {
-                                n = n->rb_right;
-                                continue;
-                        }
-                        ret = entry;
+                else
                         break;
-                }
         }
 
-        return ret;
-}
-
-/*
- * return a chunk at least bytes size, as close to offset that we can get.
- */
-static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
-                                                  u64 offset, u64 bytes)
-{
-        struct rb_node *n = root->rb_node;
-        struct btrfs_free_space *entry, *ret = NULL;
+        if (bitmap_only) {
+                if (!entry)
+                        return NULL;
+                if (entry->bitmap)
+                        return entry;
 
-        while (n) {
-                entry = rb_entry(n, struct btrfs_free_space, bytes_index);
+                /*
+                 * bitmap entry and extent entry may share same offset,
+                 * in that case, bitmap entry comes after extent entry.
+                 */
+                n = rb_next(n);
+                if (!n)
+                        return NULL;
+                entry = rb_entry(n, struct btrfs_free_space, offset_index);
+                if (entry->offset != offset)
+                        return NULL;
 
-                if (bytes < entry->bytes) {
+                WARN_ON(!entry->bitmap);
+                return entry;
+        } else if (entry) {
+                if (entry->bitmap) {
                         /*
-                         * We prefer to get a hole size as close to the size we
-                         * are asking for so we don't take small slivers out of
-                         * huge holes, but we also want to get as close to the
-                         * offset as possible so we don't have a whole lot of
-                         * fragmentation.
+                         * if previous extent entry covers the offset,
+                         * we should return it instead of the bitmap entry
                          */
-                        if (offset <= entry->offset) {
-                                if (!ret)
-                                        ret = entry;
-                                else if (entry->bytes < ret->bytes)
-                                        ret = entry;
-                                else if (entry->offset < ret->offset)
-                                        ret = entry;
+                        n = &entry->offset_index;
+                        while (1) {
+                                n = rb_prev(n);
+                                if (!n)
+                                        break;
+                                prev = rb_entry(n, struct btrfs_free_space,
+                                                offset_index);
+                                if (!prev->bitmap) {
+                                        if (prev->offset + prev->bytes > offset)
+                                                entry = prev;
+                                        break;
+                                }
                         }
-                        n = n->rb_left;
-                } else if (bytes > entry->bytes) {
-                        n = n->rb_right;
+                }
+                return entry;
+        }
+
+        if (!prev)
+                return NULL;
+
+        /* find last entry before the 'offset' */
+        entry = prev;
+        if (entry->offset > offset) {
+                n = rb_prev(&entry->offset_index);
+                if (n) {
+                        entry = rb_entry(n, struct btrfs_free_space,
+                                        offset_index);
+                        BUG_ON(entry->offset > offset);
                 } else {
-                        /*
-                         * Ok we may have multiple chunks of the wanted size,
-                         * so we don't want to take the first one we find, we
-                         * want to take the one closest to our given offset, so
-                         * keep searching just in case theres a better match.
-                         */
-                        n = n->rb_right;
-                        if (offset > entry->offset)
-                                continue;
-                        else if (!ret || entry->offset < ret->offset)
-                                ret = entry;
+                        if (fuzzy)
+                                return entry;
+                        else
+                                return NULL;
                 }
         }
 
-        return ret;
+        if (entry->bitmap) {
+                n = &entry->offset_index;
+                while (1) {
+                        n = rb_prev(n);
+                        if (!n)
+                                break;
+                        prev = rb_entry(n, struct btrfs_free_space,
+                                        offset_index);
+                        if (!prev->bitmap) {
+                                if (prev->offset + prev->bytes > offset)
+                                        return prev;
+                                break;
+                        }
+                }
+                if (entry->offset + BITS_PER_BITMAP *
+                    block_group->sectorsize > offset)
+                        return entry;
+        } else if (entry->offset + entry->bytes > offset)
+                return entry;
+
+        if (!fuzzy)
+                return NULL;
+
+        while (1) {
+                if (entry->bitmap) {
+                        if (entry->offset + BITS_PER_BITMAP *
+                            block_group->sectorsize > offset)
+                                break;
+                } else {
+                        if (entry->offset + entry->bytes > offset)
+                                break;
+                }
+
+                n = rb_next(&entry->offset_index);
+                if (!n)
+                        return NULL;
+                entry = rb_entry(n, struct btrfs_free_space, offset_index);
+        }
+        return entry;
 }
 
 static void unlink_free_space(struct btrfs_block_group_cache *block_group,
                               struct btrfs_free_space *info)
 {
         rb_erase(&info->offset_index, &block_group->free_space_offset);
-        rb_erase(&info->bytes_index, &block_group->free_space_bytes);
+        block_group->free_extents--;
+        block_group->free_space -= info->bytes;
 }
 
 static int link_free_space(struct btrfs_block_group_cache *block_group,
@@ -190,17 +246,314 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 {
         int ret = 0;
 
-
-        BUG_ON(!info->bytes);
+        BUG_ON(!info->bitmap && !info->bytes);
         ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
-                                 &info->offset_index);
+                                 &info->offset_index, (info->bitmap != NULL));
         if (ret)
                 return ret;
 
-        ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
-                                &info->bytes_index);
-        if (ret)
-                return ret;
+        block_group->free_space += info->bytes;
+        block_group->free_extents++;
+        return ret;
+}
+
+static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
+{
+        u64 max_bytes, possible_bytes;
+
+        /*
+         * The goal is to keep the total amount of memory used per 1gb of space
+         * at or below 32k, so we need to adjust how much memory we allow to be
+         * used by extent based free space tracking
+         */
+        max_bytes = MAX_CACHE_BYTES_PER_GIG *
+                (div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
+
+        possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
+                (sizeof(struct btrfs_free_space) *
+                 block_group->extents_thresh);
+
+        if (possible_bytes > max_bytes) {
+                int extent_bytes = max_bytes -
+                        (block_group->total_bitmaps * PAGE_CACHE_SIZE);
+
+                if (extent_bytes <= 0) {
+                        block_group->extents_thresh = 0;
+                        return;
+                }
+
+                block_group->extents_thresh = extent_bytes /
+                        (sizeof(struct btrfs_free_space));
+        }
+}
+
+static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
+                              struct btrfs_free_space *info, u64 offset,
+                              u64 bytes)
+{
+        unsigned long start, end;
+        unsigned long i;
+
+        start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+        end = start + bytes_to_bits(bytes, block_group->sectorsize);
+        BUG_ON(end > BITS_PER_BITMAP);
+
+        for (i = start; i < end; i++)
+                clear_bit(i, info->bitmap);
+
+        info->bytes -= bytes;
+        block_group->free_space -= bytes;
+}
+
+static void bitmap_set_bits(struct btrfs_block_group_cache *block_group,
+                            struct btrfs_free_space *info, u64 offset,
+                            u64 bytes)
+{
+        unsigned long start, end;
+        unsigned long i;
+
+        start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+        end = start + bytes_to_bits(bytes, block_group->sectorsize);
+        BUG_ON(end > BITS_PER_BITMAP);
+
+        for (i = start; i < end; i++)
+                set_bit(i, info->bitmap);
+
+        info->bytes += bytes;
+        block_group->free_space += bytes;
+}
+
+static int search_bitmap(struct btrfs_block_group_cache *block_group,
+                         struct btrfs_free_space *bitmap_info, u64 *offset,
+                         u64 *bytes)
+{
+        unsigned long found_bits = 0;
+        unsigned long bits, i;
+        unsigned long next_zero;
+
+        i = offset_to_bit(bitmap_info->offset, block_group->sectorsize,
+                          max_t(u64, *offset, bitmap_info->offset));
+        bits = bytes_to_bits(*bytes, block_group->sectorsize);
+
+        for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i);
+             i < BITS_PER_BITMAP;
+             i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) {
+                next_zero = find_next_zero_bit(bitmap_info->bitmap,
+                                               BITS_PER_BITMAP, i);
+                if ((next_zero - i) >= bits) {
+                        found_bits = next_zero - i;
+                        break;
+                }
+                i = next_zero;
+        }
+
+        if (found_bits) {
+                *offset = (u64)(i * block_group->sectorsize) +
+                        bitmap_info->offset;
+                *bytes = (u64)(found_bits) * block_group->sectorsize;
+                return 0;
+        }
+
+        return -1;
+}
+
+static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache
+                                                *block_group, u64 *offset,
+                                                u64 *bytes, int debug)
+{
+        struct btrfs_free_space *entry;
+        struct rb_node *node;
+        int ret;
+
+        if (!block_group->free_space_offset.rb_node)
+                return NULL;
+
+        entry = tree_search_offset(block_group,
+                                   offset_to_bitmap(block_group, *offset),
+                                   0, 1);
+        if (!entry)
+                return NULL;
+
+        for (node = &entry->offset_index; node; node = rb_next(node)) {
+                entry = rb_entry(node, struct btrfs_free_space, offset_index);
+                if (entry->bytes < *bytes)
+                        continue;
+
+                if (entry->bitmap) {
+                        ret = search_bitmap(block_group, entry, offset, bytes);
+                        if (!ret)
+                                return entry;
+                        continue;
+                }
+
+                *offset = entry->offset;
+                *bytes = entry->bytes;
+                return entry;
+        }
+
+        return NULL;
+}
+
+static void add_new_bitmap(struct btrfs_block_group_cache *block_group,
+                           struct btrfs_free_space *info, u64 offset)
+{
+        u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize;
+        int max_bitmaps = (int)div64_u64(block_group->key.offset +
+                                         bytes_per_bg - 1, bytes_per_bg);
+        BUG_ON(block_group->total_bitmaps >= max_bitmaps);
+
+        info->offset = offset_to_bitmap(block_group, offset);
+        link_free_space(block_group, info);
+        block_group->total_bitmaps++;
+
+        recalculate_thresholds(block_group);
+}
+
+static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group,
+                              struct btrfs_free_space *bitmap_info,
+                              u64 *offset, u64 *bytes)
+{
+        u64 end;
+
+again:
+        end = bitmap_info->offset +
+                (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1;
+
+        if (*offset > bitmap_info->offset && *offset + *bytes > end) {
+                bitmap_clear_bits(block_group, bitmap_info, *offset,
+                                  end - *offset + 1);
+                *bytes -= end - *offset + 1;
+                *offset = end + 1;
+        } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
+                bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes);
+                *bytes = 0;
+        }
+
+        if (*bytes) {
+                if (!bitmap_info->bytes) {
+                        unlink_free_space(block_group, bitmap_info);
+                        kfree(bitmap_info->bitmap);
+                        kfree(bitmap_info);
+                        block_group->total_bitmaps--;
+                        recalculate_thresholds(block_group);
+                }
+
+                bitmap_info = tree_search_offset(block_group,
+                                                 offset_to_bitmap(block_group,
+                                                                  *offset),
+                                                 1, 0);
+                if (!bitmap_info)
+                        return -EINVAL;
+
+                if (!bitmap_info->bitmap)
+                        return -EAGAIN;
+
+                goto again;
+        } else if (!bitmap_info->bytes) {
+                unlink_free_space(block_group, bitmap_info);
+                kfree(bitmap_info->bitmap);
+                kfree(bitmap_info);
+                block_group->total_bitmaps--;
+                recalculate_thresholds(block_group);
+        }
+
+        return 0;
+}
+
+static int insert_into_bitmap(struct btrfs_block_group_cache *block_group,
+                              struct btrfs_free_space *info)
+{
+        struct btrfs_free_space *bitmap_info;
+        int added = 0;
+        u64 bytes, offset, end;
+        int ret;
+
+        /*
+         * If we are below the extents threshold then we can add this as an
+         * extent, and don't have to deal with the bitmap
+         */
+        if (block_group->free_extents < block_group->extents_thresh &&
+            info->bytes > block_group->sectorsize * 4)
+                return 0;
+
+        /*
+         * some block groups are so tiny they can't be enveloped by a bitmap, so
+         * don't even bother to create a bitmap for this
+         */
+        if (BITS_PER_BITMAP * block_group->sectorsize >
+            block_group->key.offset)
+                return 0;
+
+        bytes = info->bytes;
+        offset = info->offset;
+
+again:
+        bitmap_info = tree_search_offset(block_group,
+                                         offset_to_bitmap(block_group, offset),
+                                         1, 0);
+        if (!bitmap_info) {
+                BUG_ON(added);
+                goto new_bitmap;
+        }
+
+        end = bitmap_info->offset +
+                (u64)(BITS_PER_BITMAP * block_group->sectorsize);
+
+        if (offset >= bitmap_info->offset && offset + bytes > end) {
+                bitmap_set_bits(block_group, bitmap_info, offset,
+                                end - offset);
+                bytes -= end - offset;
+                offset = end;
+                added = 0;
+        } else if (offset >= bitmap_info->offset && offset + bytes <= end) {
+                bitmap_set_bits(block_group, bitmap_info, offset, bytes);
+                bytes = 0;
+        } else {
+                BUG();
+        }
+
+        if (!bytes) {
+                ret = 1;
+                goto out;
+        } else
+                goto again;
+
+new_bitmap:
+        if (info && info->bitmap) {
+                add_new_bitmap(block_group, info, offset);
+                added = 1;
+                info = NULL;
+                goto again;
+        } else {
+                spin_unlock(&block_group->tree_lock);
+
+                /* no pre-allocated info, allocate a new one */
+                if (!info) {
+                        info = kzalloc(sizeof(struct btrfs_free_space),
+                                       GFP_NOFS);
+                        if (!info) {
+                                spin_lock(&block_group->tree_lock);
+                                ret = -ENOMEM;
+                                goto out;
+                        }
+                }
+
+                /* allocate the bitmap */
+                info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+                spin_lock(&block_group->tree_lock);
+                if (!info->bitmap) {
+                        ret = -ENOMEM;
+                        goto out;
+                }
+                goto again;
+        }
+
+out:
+        if (info) {
+                if (info->bitmap)
+                        kfree(info->bitmap);
+                kfree(info);
+        }
 
         return ret;
 }
@@ -208,8 +561,8 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
                          u64 offset, u64 bytes)
 {
-        struct btrfs_free_space *right_info;
-        struct btrfs_free_space *left_info;
+        struct btrfs_free_space *right_info = NULL;
+        struct btrfs_free_space *left_info = NULL;
         struct btrfs_free_space *info = NULL;
         int ret = 0;
 
@@ -227,18 +580,38 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
          * are adding, if there is remove that struct and add a new one to
          * cover the entire range
          */
-        right_info = tree_search_offset(&block_group->free_space_offset,
-                                        offset+bytes, 0, 0);
-        left_info = tree_search_offset(&block_group->free_space_offset,
-                                       offset-1, 0, 1);
+        right_info = tree_search_offset(block_group, offset + bytes, 0, 0);
+        if (right_info && rb_prev(&right_info->offset_index))
+                left_info = rb_entry(rb_prev(&right_info->offset_index),
+                                     struct btrfs_free_space, offset_index);
+        else
+                left_info = tree_search_offset(block_group, offset - 1, 0, 0);
 
-        if (right_info) {
+        /*
+         * If there was no extent directly to the left or right of this new
+         * extent then we know we're going to have to allocate a new extent, so
+         * before we do that see if we need to drop this into a bitmap
+         */
+        if ((!left_info || left_info->bitmap) &&
+            (!right_info || right_info->bitmap)) {
+                ret = insert_into_bitmap(block_group, info);
+
+                if (ret < 0) {
+                        goto out;
+                } else if (ret) {
+                        ret = 0;
+                        goto out;
+                }
+        }
+
+        if (right_info && !right_info->bitmap) {
                 unlink_free_space(block_group, right_info);
                 info->bytes += right_info->bytes;
                 kfree(right_info);
         }
 
-        if (left_info && left_info->offset + left_info->bytes == offset) {
+        if (left_info && !left_info->bitmap &&
+            left_info->offset + left_info->bytes == offset) {
                 unlink_free_space(block_group, left_info);
                 info->offset = left_info->offset;
                 info->bytes += left_info->bytes;
@@ -248,11 +621,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
         ret = link_free_space(block_group, info);
         if (ret)
                 kfree(info);
-
+out:
         spin_unlock(&block_group->tree_lock);
 
         if (ret) {
-                printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
+                printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret);
                 BUG_ON(ret == -EEXIST);
         }
 
@@ -263,40 +636,65 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
                             u64 offset, u64 bytes)
 {
         struct btrfs_free_space *info;
+        struct btrfs_free_space *next_info = NULL;
         int ret = 0;
 
         spin_lock(&block_group->tree_lock);
 
-        info = tree_search_offset(&block_group->free_space_offset, offset, 0,
-                                  1);
-        if (info && info->offset == offset) {
-                if (info->bytes < bytes) {
-                        printk(KERN_ERR "Found free space at %llu, size %llu,"
-                               "trying to use %llu\n",
-                               (unsigned long long)info->offset,
-                               (unsigned long long)info->bytes,
-                               (unsigned long long)bytes);
+again:
+        info = tree_search_offset(block_group, offset, 0, 0);
+        if (!info) {
+                WARN_ON(1);
+                goto out_lock;
+        }
+
+        if (info->bytes < bytes && rb_next(&info->offset_index)) {
+                u64 end;
+                next_info = rb_entry(rb_next(&info->offset_index),
+                                             struct btrfs_free_space,
+                                             offset_index);
+
+                if (next_info->bitmap)
+                        end = next_info->offset + BITS_PER_BITMAP *
+                                block_group->sectorsize - 1;
+                else
+                        end = next_info->offset + next_info->bytes;
+
+                if (next_info->bytes < bytes ||
+                    next_info->offset > offset || offset > end) {
+                        printk(KERN_CRIT "Found free space at %llu, size %llu,"
+                              " trying to use %llu\n",
+                              (unsigned long long)info->offset,
+                              (unsigned long long)info->bytes,
+                              (unsigned long long)bytes);
                         WARN_ON(1);
                         ret = -EINVAL;
-                        spin_unlock(&block_group->tree_lock);
-                        goto out;
+                        goto out_lock;
                 }
-                unlink_free_space(block_group, info);
 
-                if (info->bytes == bytes) {
-                        kfree(info);
-                        spin_unlock(&block_group->tree_lock);
-                        goto out;
+                info = next_info;
+        }
+
+        if (info->bytes == bytes) {
+                unlink_free_space(block_group, info);
+                if (info->bitmap) {
+                        kfree(info->bitmap);
+                        block_group->total_bitmaps--;
                 }
+                kfree(info);
+                goto out_lock;
+        }
 
+        if (!info->bitmap && info->offset == offset) {
+                unlink_free_space(block_group, info);
                 info->offset += bytes;
                 info->bytes -= bytes;
+                link_free_space(block_group, info);
+                goto out_lock;
+        }
 
-                ret = link_free_space(block_group, info);
-                spin_unlock(&block_group->tree_lock);
-                BUG_ON(ret);
-        } else if (info && info->offset < offset &&
-                   info->offset + info->bytes >= offset + bytes) {
+        if (!info->bitmap && info->offset <= offset &&
+            info->offset + info->bytes >= offset + bytes) {
                 u64 old_start = info->offset;
                 /*
                  * we're freeing space in the middle of the info,
@@ -312,7 +710,9 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
                         info->offset = offset + bytes;
                         info->bytes = old_end - info->offset;
                         ret = link_free_space(block_group, info);
-                        BUG_ON(ret);
+                        WARN_ON(ret);
+                        if (ret)
+                                goto out_lock;
                 } else {
                         /* the hole we're creating ends at the end
                          * of the info struct, just free the info
@@ -320,32 +720,22 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
                         kfree(info);
                 }
                 spin_unlock(&block_group->tree_lock);
-                /* step two, insert a new info struct to cover anything
-                 * before the hole
+
+                /* step two, insert a new info struct to cover
+                 * anything before the hole
                  */
                 ret = btrfs_add_free_space(block_group, old_start,
                                            offset - old_start);
-                BUG_ON(ret);
-        } else {
-                spin_unlock(&block_group->tree_lock);
-                if (!info) {
-                        printk(KERN_ERR "couldn't find space %llu to free\n",
-                               (unsigned long long)offset);
-                        printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
-                               block_group->cached,
-                               (unsigned long long)block_group->key.objectid,
-                               (unsigned long long)block_group->key.offset);
-                        btrfs_dump_free_space(block_group, bytes);
-                } else if (info) {
-                        printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
-                               "but wanted offset=%llu bytes=%llu\n",
-                               (unsigned long long)info->offset,
-                               (unsigned long long)info->bytes,
-                               (unsigned long long)offset,
-                               (unsigned long long)bytes);
-                }
-                WARN_ON(1);
+                WARN_ON(ret);
+                goto out;
         }
+
+        ret = remove_from_bitmap(block_group, info, &offset, &bytes);
+        if (ret == -EAGAIN)
+                goto again;
+        BUG_ON(ret);
+out_lock:
+        spin_unlock(&block_group->tree_lock);
 out:
         return ret;
 }
@@ -361,10 +751,13 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
                 info = rb_entry(n, struct btrfs_free_space, offset_index);
                 if (info->bytes >= bytes)
                         count++;
-                printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+                printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n",
                        (unsigned long long)info->offset,
-                       (unsigned long long)info->bytes);
+                       (unsigned long long)info->bytes,
+                       (info->bitmap) ? "yes" : "no");
         }
+        printk(KERN_INFO "block group has cluster?: %s\n",
+               list_empty(&block_group->cluster_list) ? "no" : "yes");
         printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
                "\n", count);
 }
@@ -397,26 +790,35 @@ __btrfs_return_cluster_to_free_space(
 {
         struct btrfs_free_space *entry;
         struct rb_node *node;
+        bool bitmap;
 
         spin_lock(&cluster->lock);
         if (cluster->block_group != block_group)
                 goto out;
 
+        bitmap = cluster->points_to_bitmap;
+        cluster->block_group = NULL;
         cluster->window_start = 0;
+        list_del_init(&cluster->block_group_list);
+        cluster->points_to_bitmap = false;
+
+        if (bitmap)
+                goto out;
+
         node = rb_first(&cluster->root);
-        while(node) {
+        while (node) {
                 entry = rb_entry(node, struct btrfs_free_space, offset_index);
                 node = rb_next(&entry->offset_index);
                 rb_erase(&entry->offset_index, &cluster->root);
-                link_free_space(block_group, entry);
+                BUG_ON(entry->bitmap);
+                tree_insert_offset(&block_group->free_space_offset,
+                                   entry->offset, &entry->offset_index, 0);
         }
-        list_del_init(&cluster->block_group_list);
-
-        btrfs_put_block_group(cluster->block_group);
-        cluster->block_group = NULL;
         cluster->root.rb_node = NULL;
+
 out:
         spin_unlock(&cluster->lock);
+        btrfs_put_block_group(block_group);
         return 0;
 }
 
@@ -425,20 +827,28 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
         struct btrfs_free_space *info;
         struct rb_node *node;
         struct btrfs_free_cluster *cluster;
-        struct btrfs_free_cluster *safe;
+        struct list_head *head;
 
         spin_lock(&block_group->tree_lock);
-
-        list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
-                                 block_group_list) {
+        while ((head = block_group->cluster_list.next) !=
+               &block_group->cluster_list) {
+                cluster = list_entry(head, struct btrfs_free_cluster,
+                                     block_group_list);
 
                 WARN_ON(cluster->block_group != block_group);
                 __btrfs_return_cluster_to_free_space(block_group, cluster);
+                if (need_resched()) {
+                        spin_unlock(&block_group->tree_lock);
+                        cond_resched();
+                        spin_lock(&block_group->tree_lock);
+                }
         }
 
-        while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
-                info = rb_entry(node, struct btrfs_free_space, bytes_index);
+        while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
+                info = rb_entry(node, struct btrfs_free_space, offset_index);
                 unlink_free_space(block_group, info);
+                if (info->bitmap)
+                        kfree(info->bitmap);
                 kfree(info);
                 if (need_resched()) {
                         spin_unlock(&block_group->tree_lock);
@@ -446,6 +856,7 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
                         spin_lock(&block_group->tree_lock);
                 }
         }
+
         spin_unlock(&block_group->tree_lock);
 }
 
@@ -453,25 +864,35 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group,
                                u64 offset, u64 bytes, u64 empty_size)
 {
         struct btrfs_free_space *entry = NULL;
+        u64 bytes_search = bytes + empty_size;
         u64 ret = 0;
 
         spin_lock(&block_group->tree_lock);
-        entry = tree_search_offset(&block_group->free_space_offset, offset,
-                                   bytes + empty_size, 1);
+        entry = find_free_space(block_group, &offset, &bytes_search, 0);
         if (!entry)
-                entry = tree_search_bytes(&block_group->free_space_bytes,
-                                          offset, bytes + empty_size);
-        if (entry) {
+                goto out;
+
+        ret = offset;
+        if (entry->bitmap) {
+                bitmap_clear_bits(block_group, entry, offset, bytes);
+                if (!entry->bytes) {
+                        unlink_free_space(block_group, entry);
+                        kfree(entry->bitmap);
+                        kfree(entry);
+                        block_group->total_bitmaps--;
+                        recalculate_thresholds(block_group);
+                }
+        } else {
                 unlink_free_space(block_group, entry);
-                ret = entry->offset;
                 entry->offset += bytes;
                 entry->bytes -= bytes;
-
                 if (!entry->bytes)
                         kfree(entry);
                 else
                         link_free_space(block_group, entry);
         }
+
+out:
         spin_unlock(&block_group->tree_lock);
 
         return ret;
@@ -517,6 +938,47 @@ int btrfs_return_cluster_to_free_space(
         return ret;
 }
 
+static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group,
+                                   struct btrfs_free_cluster *cluster,
+                                   u64 bytes, u64 min_start)
+{
+        struct btrfs_free_space *entry;
+        int err;
+        u64 search_start = cluster->window_start;
+        u64 search_bytes = bytes;
+        u64 ret = 0;
+
+        spin_lock(&block_group->tree_lock);
+        spin_lock(&cluster->lock);
+
+        if (!cluster->points_to_bitmap)
+                goto out;
+
+        if (cluster->block_group != block_group)
+                goto out;
+
+        entry = tree_search_offset(block_group, search_start, 0, 0);
+
+        if (!entry || !entry->bitmap)
+                goto out;
+
+        search_start = min_start;
+        search_bytes = bytes;
+
+        err = search_bitmap(block_group, entry, &search_start,
+                            &search_bytes);
+        if (err)
+                goto out;
+
+        ret = search_start;
+        bitmap_clear_bits(block_group, entry, ret, bytes);
+out:
+        spin_unlock(&cluster->lock);
+        spin_unlock(&block_group->tree_lock);
+
+        return ret;
+}
+
 /*
  * given a cluster, try to allocate 'bytes' from it, returns 0
  * if it couldn't find anything suitably large, or a logical disk offset
@@ -530,6 +992,10 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
         struct rb_node *node;
         u64 ret = 0;
 
+        if (cluster->points_to_bitmap)
+                return btrfs_alloc_from_bitmap(block_group, cluster, bytes,
+                                               min_start);
+
         spin_lock(&cluster->lock);
         if (bytes > cluster->max_size)
                 goto out;
@@ -567,9 +1033,73 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
         }
 out:
         spin_unlock(&cluster->lock);
+
         return ret;
 }
 
+static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group,
+                                struct btrfs_free_space *entry,
+                                struct btrfs_free_cluster *cluster,
+                                u64 offset, u64 bytes, u64 min_bytes)
+{
+        unsigned long next_zero;
+        unsigned long i;
+        unsigned long search_bits;
+        unsigned long total_bits;
+        unsigned long found_bits;
+        unsigned long start = 0;
+        unsigned long total_found = 0;
+        bool found = false;
+
+        i = offset_to_bit(entry->offset, block_group->sectorsize,
+                          max_t(u64, offset, entry->offset));
+        search_bits = bytes_to_bits(min_bytes, block_group->sectorsize);
+        total_bits = bytes_to_bits(bytes, block_group->sectorsize);
+
+again:
+        found_bits = 0;
+        for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i);
+             i < BITS_PER_BITMAP;
+             i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) {
+                next_zero = find_next_zero_bit(entry->bitmap,
+                                               BITS_PER_BITMAP, i);
+                if (next_zero - i >= search_bits) {
+                        found_bits = next_zero - i;
+                        break;
+                }
+                i = next_zero;
+        }
+
+        if (!found_bits)
+                return -1;
+
+        if (!found) {
+                start = i;
+                found = true;
+        }
+
+        total_found += found_bits;
+
+        if (cluster->max_size < found_bits * block_group->sectorsize)
+                cluster->max_size = found_bits * block_group->sectorsize;
+
+        if (total_found < total_bits) {
+                i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero);
+                if (i - start > total_bits * 2) {
+                        total_found = 0;
+                        cluster->max_size = 0;
+                        found = false;
+                }
+                goto again;
+        }
+
+        cluster->window_start = start * block_group->sectorsize +
+                entry->offset;
+        cluster->points_to_bitmap = true;
+
+        return 0;
+}
+
 /*
  * here we try to find a cluster of blocks in a block group.  The goal
  * is to find at least bytes free and up to empty_size + bytes free.
@@ -587,12 +1117,12 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
         struct btrfs_free_space *entry = NULL;
         struct rb_node *node;
         struct btrfs_free_space *next;
-        struct btrfs_free_space *last;
+        struct btrfs_free_space *last = NULL;
         u64 min_bytes;
         u64 window_start;
         u64 window_free;
         u64 max_extent = 0;
-        int total_retries = 0;
+        bool found_bitmap = false;
         int ret;
 
         /* for metadata, allow allocates with more holes */
@@ -620,31 +1150,80 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
                 goto out;
         }
 again:
-        min_bytes = min(min_bytes, bytes + empty_size);
-        entry = tree_search_bytes(&block_group->free_space_bytes,
-                                  offset, min_bytes);
+        entry = tree_search_offset(block_group, offset, found_bitmap, 1);
         if (!entry) {
                 ret = -ENOSPC;
                 goto out;
         }
+
+        /*
+         * If found_bitmap is true, we exhausted our search for extent entries,
+         * and we just want to search all of the bitmaps that we can find, and
+         * ignore any extent entries we find.
+         */
+        while (entry->bitmap || found_bitmap ||
+               (!entry->bitmap && entry->bytes < min_bytes)) {
+                struct rb_node *node = rb_next(&entry->offset_index);
+
+                if (entry->bitmap && entry->bytes > bytes + empty_size) {
+                        ret = btrfs_bitmap_cluster(block_group, entry, cluster,
+                                                   offset, bytes + empty_size,
+                                                   min_bytes);
+                        if (!ret)
+                                goto got_it;
+                }
+
+                if (!node) {
+                        ret = -ENOSPC;
+                        goto out;
+                }
+                entry = rb_entry(node, struct btrfs_free_space, offset_index);
+        }
+
+        /*
+         * We already searched all the extent entries from the passed in offset
+         * to the end and didn't find enough space for the cluster, and we also
+         * didn't find any bitmaps that met our criteria, just go ahead and exit
+         */
+        if (found_bitmap) {
+                ret = -ENOSPC;
+                goto out;
+        }
+
+        cluster->points_to_bitmap = false;
         window_start = entry->offset;
         window_free = entry->bytes;
         last = entry;
         max_extent = entry->bytes;
 
-        while(1) {
+        while (1) {
                 /* out window is just right, lets fill it */
                 if (window_free >= bytes + empty_size)
                         break;
 
                 node = rb_next(&last->offset_index);
                 if (!node) {
+                        if (found_bitmap)
+                                goto again;
                         ret = -ENOSPC;
                         goto out;
                 }
                 next = rb_entry(node, struct btrfs_free_space, offset_index);
 
                 /*
+                 * we found a bitmap, so if this search doesn't result in a
+                 * cluster, we know to go and search again for the bitmaps and
+                 * start looking for space there
+                 */
+                if (next->bitmap) {
+                        if (!found_bitmap)
+                                offset = next->offset;
+                        found_bitmap = true;
+                        last = next;
+                        continue;
+                }
+
+                /*
                  * we haven't filled the empty size and the window is
                  * very large.  reset and try again
                  */
@@ -655,19 +1234,6 @@ again:
                         window_free = entry->bytes;
                         last = entry;
                         max_extent = 0;
-                        total_retries++;
-                        if (total_retries % 64 == 0) {
-                                if (min_bytes >= (bytes + empty_size)) {
-                                        ret = -ENOSPC;
-                                        goto out;
-                                }
-                                /*
-                                 * grow our allocation a bit, we're not having
-                                 * much luck
-                                 */
-                                min_bytes *= 2;
-                                goto again;
-                        }
                 } else {
                         last = next;
                         window_free += next->bytes;
@@ -685,11 +1251,19 @@ again:
          * The cluster includes an rbtree, but only uses the offset index
          * of each free space cache entry.
          */
-        while(1) {
+        while (1) {
                 node = rb_next(&entry->offset_index);
-                unlink_free_space(block_group, entry);
+                if (entry->bitmap && node) {
+                        entry = rb_entry(node, struct btrfs_free_space,
+                                         offset_index);
+                        continue;
+                } else if (entry->bitmap && !node) {
+                        break;
+                }
+
+                rb_erase(&entry->offset_index, &block_group->free_space_offset);
                 ret = tree_insert_offset(&cluster->root, entry->offset,
-                                         &entry->offset_index);
+                                         &entry->offset_index, 0);
                 BUG_ON(ret);
 
                 if (!node || entry == last)
@@ -697,8 +1271,10 @@ again:
 
                 entry = rb_entry(node, struct btrfs_free_space, offset_index);
         }
-        ret = 0;
+
         cluster->max_size = max_extent;
+got_it:
+        ret = 0;
         atomic_inc(&block_group->count);
         list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
         cluster->block_group = block_group;
@@ -718,6 +1294,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster)
         spin_lock_init(&cluster->refill_lock);
         cluster->root.rb_node = NULL;
         cluster->max_size = 0;
+        cluster->points_to_bitmap = false;
         INIT_LIST_HEAD(&cluster->block_group_list);
         cluster->block_group = NULL;
 }
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index 266fb8764054..890a8e79011b 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -19,6 +19,14 @@
 #ifndef __BTRFS_FREE_SPACE_CACHE
 #define __BTRFS_FREE_SPACE_CACHE
 
+struct btrfs_free_space {
+        struct rb_node offset_index;
+        u64 offset;
+        u64 bytes;
+        unsigned long *bitmap;
+        struct list_head list;
+};
+
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
                          u64 bytenr, u64 size);
 int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 7ffa3d34ea19..56fe83fa60c4 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -26,7 +26,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mpage.h>
 #include <linux/swap.h>
@@ -2604,8 +2603,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
         if (root->ref_cows)
                 btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
         path = btrfs_alloc_path();
-        path->reada = -1;
         BUG_ON(!path);
+        path->reada = -1;
 
         /* FIXME, add redo link to tree so we don't leak on crash */
         key.objectid = inode->i_ino;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 9f4db848db10..bd88f25889f7 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -27,7 +27,6 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
 #include <linux/mpage.h>
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 6d6523da0a30..0d126be22b63 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -309,7 +309,7 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
         }
         printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n",
                (unsigned long long)btrfs_header_bytenr(c),
-               btrfs_header_level(c), nr,
+              level, nr,
                (u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr);
         for (i = 0; i < nr; i++) {
                 btrfs_node_key_to_cpu(c, &key, i);
@@ -326,10 +326,10 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
                                         btrfs_level_size(root, level - 1),
                                         btrfs_node_ptr_generation(c, i));
                 if (btrfs_is_leaf(next) &&
-                    btrfs_header_level(c) != 1)
+                   level != 1)
                         BUG();
                 if (btrfs_header_level(next) !=
-                        btrfs_header_level(c) - 1)
+                       level - 1)
                         BUG();
                 btrfs_print_tree(root, next);
                 free_extent_buffer(next);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 008397934778..e71264d1c2c9 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -670,6 +670,8 @@ again:
                         err = ret;
                         goto out;
                 }
+                if (ret > 0 && path2->slots[level] > 0)
+                        path2->slots[level]--;
 
                 eb = path2->nodes[level];
                 WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
@@ -1609,6 +1611,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc,
                 BUG_ON(level == 0);
                 path->lowest_level = level;
                 ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+                path->lowest_level = 0;
                 if (ret < 0) {
                         btrfs_free_path(path);
                         return ret;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 9f179d4832d5..6d6d06cb6dfc 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -26,7 +26,6 @@
 #include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/backing-dev.h>
 #include <linux/mount.h>
 #include <linux/mpage.h>
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 2dbf1c1f56ee..cdbb5022da52 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -40,6 +40,12 @@ static noinline void put_transaction(struct btrfs_transaction *transaction)
         }
 }
 
+static noinline void switch_commit_root(struct btrfs_root *root)
+{
+        free_extent_buffer(root->commit_root);
+        root->commit_root = btrfs_root_node(root);
+}
+
 /*
  * either allocate a new transaction or hop into the existing one
  */
@@ -444,9 +450,6 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 
         btrfs_write_dirty_block_groups(trans, root);
 
-        ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-        BUG_ON(ret);
-
         while (1) {
                 old_root_bytenr = btrfs_root_bytenr(&root->root_item);
                 if (old_root_bytenr == root->node->start)
@@ -457,13 +460,14 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
                                         &root->root_key,
                                         &root->root_item);
                 BUG_ON(ret);
-                btrfs_write_dirty_block_groups(trans, root);
 
-                ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
+                ret = btrfs_write_dirty_block_groups(trans, root);
                 BUG_ON(ret);
         }
-        free_extent_buffer(root->commit_root);
-        root->commit_root = btrfs_root_node(root);
+
+        if (root != root->fs_info->extent_root)
+                switch_commit_root(root);
+
         return 0;
 }
 
@@ -495,10 +499,12 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans,
                 root = list_entry(next, struct btrfs_root, dirty_list);
 
                 update_cowonly_root(trans, root);
-
-                ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-                BUG_ON(ret);
         }
+
+        down_write(&fs_info->extent_commit_sem);
+        switch_commit_root(fs_info->extent_root);
+        up_write(&fs_info->extent_commit_sem);
+
         return 0;
 }
 
@@ -544,8 +550,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
                         btrfs_update_reloc_root(trans, root);
 
                         if (root->commit_root != root->node) {
-                                free_extent_buffer(root->commit_root);
-                                root->commit_root = btrfs_root_node(root);
+                                switch_commit_root(root);
                                 btrfs_set_root_node(&root->root_item,
                                                     root->node);
                         }
@@ -852,6 +857,16 @@ static void update_super_roots(struct btrfs_root *root)
         super->root_level = root_item->level;
 }
 
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
+{
+        int ret = 0;
+        spin_lock(&info->new_trans_lock);
+        if (info->running_transaction)
+                ret = info->running_transaction->in_commit;
+        spin_unlock(&info->new_trans_lock);
+        return ret;
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
                              struct btrfs_root *root)
 {
@@ -943,9 +958,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
                 mutex_unlock(&root->fs_info->trans_mutex);
 
-                if (flush_on_commit || snap_pending) {
-                        if (flush_on_commit)
-                                btrfs_start_delalloc_inodes(root);
+                if (flush_on_commit) {
+                        btrfs_start_delalloc_inodes(root);
+                        ret = btrfs_wait_ordered_extents(root, 0);
+                        BUG_ON(ret);
+                } else if (snap_pending) {
                         ret = btrfs_wait_ordered_extents(root, 1);
                         BUG_ON(ret);
                 }
@@ -1009,15 +1026,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
         btrfs_set_root_node(&root->fs_info->tree_root->root_item,
                             root->fs_info->tree_root->node);
-        free_extent_buffer(root->fs_info->tree_root->commit_root);
-        root->fs_info->tree_root->commit_root =
-                                btrfs_root_node(root->fs_info->tree_root);
+        switch_commit_root(root->fs_info->tree_root);
 
         btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
                             root->fs_info->chunk_root->node);
-        free_extent_buffer(root->fs_info->chunk_root->commit_root);
-        root->fs_info->chunk_root->commit_root =
-                                btrfs_root_node(root->fs_info->chunk_root);
+        switch_commit_root(root->fs_info->chunk_root);
 
         update_super_roots(root);
 
@@ -1057,6 +1070,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
         cur_trans->commit_done = 1;
 
         root->fs_info->last_trans_committed = cur_trans->transid;
+
         wake_up(&cur_trans->commit_wait);
 
         put_transaction(cur_trans);
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 961c3ee5a2e1..663c67404918 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -107,4 +107,5 @@ int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
                                 struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
                                         struct extent_io_tree *dirty_pages);
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c13922206d1b..d91b0de7c502 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -797,7 +797,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
                 return -ENOENT;
 
         inode = read_one_inode(root, key->objectid);
-        BUG_ON(!dir);
+        BUG_ON(!inode);
 
         ref_ptr = btrfs_item_ptr_offset(eb, slot);
         ref_end = ref_ptr + btrfs_item_size_nr(eb, slot);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 3ab80e9cd767..5dbefd11b4af 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -721,7 +721,8 @@ error:
  */
 static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
                                          struct btrfs_device *device,
-                                         u64 num_bytes, u64 *start)
+                                         u64 num_bytes, u64 *start,
+                                         u64 *max_avail)
 {
         struct btrfs_key key;
         struct btrfs_root *root = device->dev_root;
@@ -758,9 +759,13 @@ static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
         ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
         if (ret < 0)
                 goto error;
-        ret = btrfs_previous_item(root, path, 0, key.type);
-        if (ret < 0)
-                goto error;
+        if (ret > 0) {
+                ret = btrfs_previous_item(root, path, key.objectid, key.type);
+                if (ret < 0)
+                        goto error;
+                if (ret > 0)
+                        start_found = 1;
+        }
         l = path->nodes[0];
         btrfs_item_key_to_cpu(l, &key, path->slots[0]);
         while (1) {
@@ -803,6 +808,10 @@ no_more_items:
                         if (last_byte < search_start)
                                 last_byte = search_start;
                         hole_size = key.offset - last_byte;
+
+                        if (hole_size > *max_avail)
+                                *max_avail = hole_size;
+
                         if (key.offset > last_byte &&
                             hole_size >= num_bytes) {
                                 *start = last_byte;
@@ -1621,6 +1630,7 @@ static int __btrfs_grow_device(struct btrfs_trans_handle *trans,
         device->fs_devices->total_rw_bytes += diff;
 
         device->total_bytes = new_size;
+        device->disk_total_bytes = new_size;
         btrfs_clear_space_info_full(device->dev_root->fs_info);
 
         return btrfs_update_device(trans, device);
@@ -2007,7 +2017,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
                         goto done;
                 if (ret) {
                         ret = 0;
-                        goto done;
+                        break;
                 }
 
                 l = path->nodes[0];
@@ -2015,7 +2025,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
                 btrfs_item_key_to_cpu(l, &key, path->slots[0]);
 
                 if (key.objectid != device->devid)
-                        goto done;
+                        break;
 
                 dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
                 length = btrfs_dev_extent_length(l, dev_extent);
@@ -2171,6 +2181,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
                              max_chunk_size);
 
 again:
+        max_avail = 0;
         if (!map || map->num_stripes != num_stripes) {
                 kfree(map);
                 map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS);
@@ -2219,7 +2230,8 @@ again:
 
                 if (device->in_fs_metadata && avail >= min_free) {
                         ret = find_free_dev_extent(trans, device,
-                                                   min_free, &dev_offset);
+                                                   min_free, &dev_offset,
+                                                   &max_avail);
                         if (ret == 0) {
                                 list_move_tail(&device->dev_alloc_list,
                                                &private_devs);
@@ -2795,26 +2807,6 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree,
                 }
         }
 
-        for (i = 0; i > nr; i++) {
-                struct btrfs_multi_bio *multi;
-                struct btrfs_bio_stripe *stripe;
-                int ret;
-
-                length = 1;
-                ret = btrfs_map_block(map_tree, WRITE, buf[i],
-                                      &length, &multi, 0);
-                BUG_ON(ret);
-
-                stripe = multi->stripes;
-                for (j = 0; j < multi->num_stripes; j++) {
-                        if (stripe->physical >= physical &&
-                            physical < stripe->physical + length)
-                                break;
-                }
-                BUG_ON(j >= multi->num_stripes);
-                kfree(multi);
-        }
-
         *logical = buf;
         *naddrs = nr;
         *stripe_len = map->stripe_len;
diff --git a/fs/char_dev.c b/fs/char_dev.c
index b7c9d5187a75..a173551e19d7 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -13,7 +13,6 @@
 #include <linux/major.h>
 #include <linux/errno.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 
 #include <linux/kobject.h>
diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c
index 7f19fefd3d45..42cec2a7c0cf 100644
--- a/fs/cifs/cifs_debug.c
+++ b/fs/cifs/cifs_debug.c
@@ -261,6 +261,8 @@ static ssize_t cifs_stats_proc_write(struct file *file,
                                         atomic_set(&tcon->num_reads, 0);
                                         atomic_set(&tcon->num_oplock_brks, 0);
                                         atomic_set(&tcon->num_opens, 0);
+                                        atomic_set(&tcon->num_posixopens, 0);
+                                        atomic_set(&tcon->num_posixmkdirs, 0);
                                         atomic_set(&tcon->num_closes, 0);
                                         atomic_set(&tcon->num_deletes, 0);
                                         atomic_set(&tcon->num_mkdirs, 0);
@@ -347,11 +349,15 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v)
                                         atomic_read(&tcon->num_locks),
                                         atomic_read(&tcon->num_hardlinks),
                                         atomic_read(&tcon->num_symlinks));
-                                seq_printf(m, "\nOpens: %d Closes: %d"
+                                seq_printf(m, "\nOpens: %d Closes: %d "
                                               "Deletes: %d",
                                         atomic_read(&tcon->num_opens),
                                         atomic_read(&tcon->num_closes),
                                         atomic_read(&tcon->num_deletes));
+                                seq_printf(m, "\nPosix Opens: %d "
+                                              "Posix Mkdirs: %d",
+                                        atomic_read(&tcon->num_posixopens),
+                                        atomic_read(&tcon->num_posixmkdirs));
                                 seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
                                         atomic_read(&tcon->num_mkdirs),
                                         atomic_read(&tcon->num_rmdirs));
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 63f6cdfa5638..6084d6379c03 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -260,6 +260,8 @@ struct cifsTconInfo {
         atomic_t num_closes;
         atomic_t num_deletes;
         atomic_t num_mkdirs;
+        atomic_t num_posixopens;
+        atomic_t num_posixmkdirs;
         atomic_t num_rmdirs;
         atomic_t num_renames;
         atomic_t num_t2renames;
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 922f5fe2084c..1866bc2927d4 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1113,7 +1113,10 @@ PsxCreat:
 psx_create_err:
         cifs_buf_release(pSMB);
 
-        cifs_stats_inc(&tcon->num_mkdirs);
+        if (posix_flags & SMB_O_DIRECTORY)
+                cifs_stats_inc(&tcon->num_posixmkdirs);
+        else
+                cifs_stats_inc(&tcon->num_posixopens);
 
         if (rc == -EAGAIN)
                 goto PsxCreat;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index e16d7592116a..fc44d316d0bb 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2452,10 +2452,10 @@ try_mount_again:
                 tcon->local_lease = volume_info->local_lease;
         }
         if (pSesInfo) {
-                if (pSesInfo->capabilities & CAP_LARGE_FILES) {
-                        sb->s_maxbytes = (u64) 1 << 63;
-                } else
-                        sb->s_maxbytes = (u64) 1 << 31; /* 2 GB */
+                if (pSesInfo->capabilities & CAP_LARGE_FILES)
+                        sb->s_maxbytes = MAX_LFS_FILESIZE;
+                else
+                        sb->s_maxbytes = MAX_NON_LFS;
         }
 
         /* BB FIXME fix time_gran to be larger for LANMAN sessions */
@@ -2726,6 +2726,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
                 strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
 
                 /* mostly informational -- no need to fail on error here */
+                kfree(tcon->nativeFileSystem);
                 tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
                                                       bytes_left, is_unicode,
                                                       nls_codepage);
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 18afe57b2461..82d83839655e 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -212,7 +212,7 @@ cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info,
  * junction to the new submount (ie to setup the fake directory
  * which represents a DFS referral).
  */
-void
+static void
 cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
 {
         struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -388,7 +388,7 @@ static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
 }
 
 /* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
-void
+static void
 cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
                        struct cifs_sb_info *cifs_sb, bool adjust_tz)
 {
@@ -513,9 +513,12 @@ int cifs_get_inode_info(struct inode **pinode,
                                         cifs_sb->mnt_cifs_flags &
                                                 CIFS_MOUNT_MAP_SPECIAL_CHR);
                         if (rc1) {
-                                /* BB EOPNOSUPP disable SERVER_INUM? */
                                 cFYI(1, ("GetSrvInodeNum rc %d", rc1));
                                 fattr.cf_uniqueid = iunique(sb, ROOT_I);
+                                /* disable serverino if call not supported */
+                                if (rc1 == -EINVAL)
+                                        cifs_sb->mnt_cifs_flags &=
+                                                        ~CIFS_MOUNT_SERVER_INUM;
                         }
                 } else {
                         fattr.cf_uniqueid = iunique(sb, ROOT_I);
diff --git a/fs/compat.c b/fs/compat.c
index fbadb947727b..94502dab972a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -32,7 +32,6 @@
 #include <linux/smb_mount.h>
 #include <linux/ncp_mount.h>
 #include <linux/nfs4_mount.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
 #include <linux/module.h>
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 626c7483b4de..f28f070a60fc 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,6 +19,7 @@
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/smp_lock.h>
 #include <linux/ioctl.h>
 #include <linux/if.h>
 #include <linux/if_bridge.h>
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 205ec95b347e..eb507c453c5f 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -435,7 +435,7 @@ static int search_rsb(struct dlm_ls *ls, char *name, int len, int b,
 static int find_rsb(struct dlm_ls *ls, char *name, int namelen,
                     unsigned int flags, struct dlm_rsb **r_ret)
 {
-        struct dlm_rsb *r, *tmp;
+        struct dlm_rsb *r = NULL, *tmp;
         uint32_t hash, bucket;
         int error = -EINVAL;
 
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index cdb580a9c7a2..618a60f03886 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -902,7 +902,7 @@ static void tcp_connect_to_sock(struct connection *con)
         int result = -EHOSTUNREACH;
         struct sockaddr_storage saddr, src_addr;
         int addr_len;
-        struct socket *sock;
+        struct socket *sock = NULL;
 
         if (con->nodeid == 0) {
                 log_print("attempt to connect sock 0 foiled");
@@ -962,6 +962,8 @@ out_err:
         if (con->sock) {
                 sock_release(con->sock);
                 con->sock = NULL;
+        } else if (sock) {
+                sock_release(sock);
         }
         /*
          * Some errors are fatal and this list might need adjusting. For other
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 894a32d438d5..16f682e26c07 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -353,7 +353,7 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count,
 {
         struct dlm_plock_info info;
         struct plock_op *op;
-        int found = 0;
+        int found = 0, do_callback = 0;
 
         if (count != sizeof(info))
                 return -EINVAL;
@@ -366,21 +366,24 @@ static ssize_t dev_write(struct file *file, const char __user *u, size_t count,
 
         spin_lock(&ops_lock);
         list_for_each_entry(op, &recv_list, list) {
-                if (op->info.fsid == info.fsid && op->info.number == info.number &&
+                if (op->info.fsid == info.fsid &&
+                    op->info.number == info.number &&
                     op->info.owner == info.owner) {
+                        struct plock_xop *xop = (struct plock_xop *)op;
                         list_del_init(&op->list);
-                        found = 1;
-                        op->done = 1;
                         memcpy(&op->info, &info, sizeof(info));
+                        if (xop->callback)
+                                do_callback = 1;
+                        else
+                                op->done = 1;
+                        found = 1;
                         break;
                 }
         }
         spin_unlock(&ops_lock);
 
         if (found) {
-                struct plock_xop *xop;
-                xop = (struct plock_xop *)op;
-                if (xop->callback)
+                if (do_callback)
                         dlm_plock_callback(op);
                 else
                         wake_up(&recv_wq);
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index af737bb56cb7..259525c9abb8 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -1303,6 +1303,13 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
         }
         (*new_auth_tok)->session_key.encrypted_key_size =
                 (body_size - (ECRYPTFS_SALT_SIZE + 5));
+        if ((*new_auth_tok)->session_key.encrypted_key_size
+            > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) {
+                printk(KERN_WARNING "Tag 3 packet contains key larger "
+                       "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n");
+                rc = -EINVAL;
+                goto out_free;
+        }
         if (unlikely(data[(*packet_size)++] != 0x04)) {
                 printk(KERN_WARNING "Unknown version number [%d]\n",
                        data[(*packet_size) - 1]);
@@ -1449,6 +1456,12 @@ parse_tag_11_packet(unsigned char *data, unsigned char *contents,
                 rc = -EINVAL;
                 goto out;
         }
+        if (unlikely((*tag_11_contents_size) > max_contents_bytes)) {
+                printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
+                       "expected size\n");
+                rc = -EINVAL;
+                goto out;
+        }
         if (data[(*packet_size)++] != 0x62) {
                 printk(KERN_WARNING "Unrecognizable packet\n");
                 rc = -EINVAL;
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index a343b4ea62f6..5ab10c3bbebe 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -31,6 +31,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/parser.h>
 #include <linux/vfs.h>
diff --git a/fs/ext2/ioctl.c b/fs/ext2/ioctl.c
index 7cb4badef927..e7431309bdca 100644
--- a/fs/ext2/ioctl.c
+++ b/fs/ext2/ioctl.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/compat.h>
 #include <linux/mount.h>
-#include <linux/smp_lock.h>
 #include <asm/current.h>
 #include <asm/uaccess.h>
 
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 3d724a95882f..373fa90c796a 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -130,8 +130,7 @@ static int ext3_readdir(struct file * filp,
                 struct buffer_head *bh = NULL;
 
                 map_bh.b_state = 0;
-                err = ext3_get_blocks_handle(NULL, inode, blk, 1,
-                                                &map_bh, 0, 0);
+                err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0);
                 if (err > 0) {
                         pgoff_t index = map_bh.b_blocknr >>
                                         (PAGE_CACHE_SHIFT - inode->i_blkbits);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5f51fed5c750..b49908a167ae 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -788,7 +788,7 @@ err_out:
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
                 sector_t iblock, unsigned long maxblocks,
                 struct buffer_head *bh_result,
-                int create, int extend_disksize)
+                int create)
 {
         int err = -EIO;
         int offsets[4];
@@ -911,13 +911,6 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
         if (!err)
                 err = ext3_splice_branch(handle, inode, iblock,
                                         partial, indirect_blks, count);
-        /*
-         * i_disksize growing is protected by truncate_mutex.  Don't forget to
-         * protect it if you're about to implement concurrent
-         * ext3_get_block() -bzzz
-        */
-        if (!err && extend_disksize && inode->i_size > ei->i_disksize)
-                ei->i_disksize = inode->i_size;
         mutex_unlock(&ei->truncate_mutex);
         if (err)
                 goto cleanup;
@@ -972,7 +965,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock,
         }
 
         ret = ext3_get_blocks_handle(handle, inode, iblock,
-                                        max_blocks, bh_result, create, 0);
+                                        max_blocks, bh_result, create);
         if (ret > 0) {
                 bh_result->b_size = (ret << inode->i_blkbits);
                 ret = 0;
@@ -1005,7 +998,7 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
         dummy.b_blocknr = -1000;
         buffer_trace_init(&dummy.b_history);
         err = ext3_get_blocks_handle(handle, inode, block, 1,
-                                        &dummy, create, 1);
+                                        &dummy, create);
         /*
          * ext3_get_blocks_handle() returns number of blocks
          * mapped. 0 in case of a HOLE.
@@ -1193,15 +1186,16 @@ write_begin_failed:
                  * i_size_read because we hold i_mutex.
                  *
                  * Add inode to orphan list in case we crash before truncate
-                 * finishes.
+                 * finishes. Do this only if ext3_can_truncate() agrees so
+                 * that orphan processing code is happy.
                  */
-                if (pos + len > inode->i_size)
+                if (pos + len > inode->i_size && ext3_can_truncate(inode))
                         ext3_orphan_add(handle, inode);
                 ext3_journal_stop(handle);
                 unlock_page(page);
                 page_cache_release(page);
                 if (pos + len > inode->i_size)
-                        vmtruncate(inode, inode->i_size);
+                        ext3_truncate(inode);
         }
         if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
                 goto retry;
@@ -1287,7 +1281,7 @@ static int ext3_ordered_write_end(struct file *file,
          * There may be allocated blocks outside of i_size because
          * we failed to copy some data. Prepare for truncate.
          */
-        if (pos + len > inode->i_size)
+        if (pos + len > inode->i_size && ext3_can_truncate(inode))
                 ext3_orphan_add(handle, inode);
         ret2 = ext3_journal_stop(handle);
         if (!ret)
@@ -1296,7 +1290,7 @@ static int ext3_ordered_write_end(struct file *file,
         page_cache_release(page);
 
         if (pos + len > inode->i_size)
-                vmtruncate(inode, inode->i_size);
+                ext3_truncate(inode);
         return ret ? ret : copied;
 }
 
@@ -1315,14 +1309,14 @@ static int ext3_writeback_write_end(struct file *file,
          * There may be allocated blocks outside of i_size because
          * we failed to copy some data. Prepare for truncate.
          */
-        if (pos + len > inode->i_size)
+        if (pos + len > inode->i_size && ext3_can_truncate(inode))
                 ext3_orphan_add(handle, inode);
         ret = ext3_journal_stop(handle);
         unlock_page(page);
         page_cache_release(page);
 
         if (pos + len > inode->i_size)
-                vmtruncate(inode, inode->i_size);
+                ext3_truncate(inode);
         return ret ? ret : copied;
 }
 
@@ -1358,7 +1352,7 @@ static int ext3_journalled_write_end(struct file *file,
          * There may be allocated blocks outside of i_size because
          * we failed to copy some data. Prepare for truncate.
          */
-        if (pos + len > inode->i_size)
+        if (pos + len > inode->i_size && ext3_can_truncate(inode))
                 ext3_orphan_add(handle, inode);
         EXT3_I(inode)->i_state |= EXT3_STATE_JDATA;
         if (inode->i_size > EXT3_I(inode)->i_disksize) {
@@ -1375,7 +1369,7 @@ static int ext3_journalled_write_end(struct file *file,
         page_cache_release(page);
 
         if (pos + len > inode->i_size)
-                vmtruncate(inode, inode->i_size);
+                ext3_truncate(inode);
         return ret ? ret : copied;
 }
 
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 0ddf7e55abe1..9714db393efe 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -93,20 +93,20 @@ typedef unsigned int ext4_group_t;
 struct ext4_allocation_request {
         /* target inode for block we're allocating */
         struct inode *inode;
+        /* how many blocks we want to allocate */
+        unsigned int len;
         /* logical block in target inode */
         ext4_lblk_t logical;
-        /* phys. target (a hint) */
-        ext4_fsblk_t goal;
         /* the closest logical allocated block to the left */
         ext4_lblk_t lleft;
-        /* phys. block for ^^^ */
-        ext4_fsblk_t pleft;
         /* the closest logical allocated block to the right */
         ext4_lblk_t lright;
-        /* phys. block for ^^^ */
+        /* phys. target (a hint) */
+        ext4_fsblk_t goal;
+        /* phys. block for the closest logical allocated block to the left */
+        ext4_fsblk_t pleft;
+        /* phys. block for the closest logical allocated block to the right */
         ext4_fsblk_t pright;
-        /* how many blocks we want to allocate */
-        unsigned int len;
         /* flags. see above EXT4_MB_HINT_* */
         unsigned int flags;
 };
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index ad13a84644e1..eb27fd0f2ee8 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -43,6 +43,8 @@ int __ext4_journal_forget(const char *where, handle_t *handle,
                         ext4_journal_abort_handle(where, __func__, bh,
                                                   handle, err);
         }
+        else
+                brelse(bh);
         return err;
 }
 
@@ -57,6 +59,8 @@ int __ext4_journal_revoke(const char *where, handle_t *handle,
                         ext4_journal_abort_handle(where, __func__, bh,
                                                   handle, err);
         }
+        else
+                brelse(bh);
         return err;
 }
 
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index be2f426f6805..139fb8cb87e4 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -131,9 +131,11 @@ int __ext4_journal_get_undo_access(const char *where, handle_t *handle,
 int __ext4_journal_get_write_access(const char *where, handle_t *handle,
                                 struct buffer_head *bh);
 
+/* When called with an invalid handle, this will still do a put on the BH */
 int __ext4_journal_forget(const char *where, handle_t *handle,
                                 struct buffer_head *bh);
 
+/* When called with an invalid handle, this will still do a put on the BH */
 int __ext4_journal_revoke(const char *where, handle_t *handle,
                                 ext4_fsblk_t blocknr, struct buffer_head *bh);
 
@@ -281,10 +283,10 @@ static inline int ext4_should_order_data(struct inode *inode)
 
 static inline int ext4_should_writeback_data(struct inode *inode)
 {
-        if (EXT4_JOURNAL(inode) == NULL)
-                return 0;
         if (!S_ISREG(inode->i_mode))
                 return 0;
+        if (EXT4_JOURNAL(inode) == NULL)
+                return 1;
         if (EXT4_I(inode)->i_flags & EXT4_JOURNAL_DATA_FL)
                 return 0;
         if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 50322a09bd01..73ebfb44ad75 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1977,6 +1977,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
                          */
                         /* 1 bitmap, 1 block group descriptor */
                         ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+                        return ret;
                 }
         }
 
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 2f645732e3b7..29e6dc7299b8 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -833,7 +833,7 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode,
         if (!goal)
                 goal = sbi->s_inode_goal;
 
-        if (goal && goal < le32_to_cpu(sbi->s_es->s_inodes_count)) {
+        if (goal && goal <= le32_to_cpu(sbi->s_es->s_inodes_count)) {
                 group = (goal - 1) / EXT4_INODES_PER_GROUP(sb);
                 ino = (goal - 1) % EXT4_INODES_PER_GROUP(sb);
                 ret2 = 0;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 60a26f3a6f8b..f9c642b22efa 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -78,16 +78,14 @@ static int ext4_inode_is_fast_symlink(struct inode *inode)
  * but there may still be a record of it in the journal, and that record
  * still needs to be revoked.
  *
- * If the handle isn't valid we're not journaling so there's nothing to do.
+ * If the handle isn't valid we're not journaling, but we still need to
+ * call into ext4_journal_revoke() to put the buffer head.
  */
 int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
                 struct buffer_head *bh, ext4_fsblk_t blocknr)
 {
         int err;
 
-        if (!ext4_handle_valid(handle))
-                return 0;
-
         might_sleep();
 
         BUFFER_TRACE(bh, "enter");
@@ -1513,14 +1511,14 @@ retry:
                  * Add inode to orphan list in case we crash before
                  * truncate finishes
                  */
-                if (pos + len > inode->i_size)
+                if (pos + len > inode->i_size && ext4_can_truncate(inode))
                         ext4_orphan_add(handle, inode);
 
                 ext4_journal_stop(handle);
                 if (pos + len > inode->i_size) {
-                        vmtruncate(inode, inode->i_size);
+                        ext4_truncate(inode);
                         /*
-                         * If vmtruncate failed early the inode might
+                         * If truncate failed early the inode might
                          * still be on the orphan list; we need to
                          * make sure the inode is removed from the
                          * orphan list in that case.
@@ -1614,7 +1612,7 @@ static int ext4_ordered_write_end(struct file *file,
                 ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
                                                         page, fsdata);
                 copied = ret2;
-                if (pos + len > inode->i_size)
+                if (pos + len > inode->i_size && ext4_can_truncate(inode))
                         /* if we have allocated more blocks and copied
                          * less. We will have blocks allocated outside
                          * inode->i_size. So truncate them
@@ -1628,9 +1626,9 @@ static int ext4_ordered_write_end(struct file *file,
                 ret = ret2;
 
         if (pos + len > inode->i_size) {
-                vmtruncate(inode, inode->i_size);
+                ext4_truncate(inode);
                 /*
-                 * If vmtruncate failed early the inode might still be
+                 * If truncate failed early the inode might still be
                  * on the orphan list; we need to make sure the inode
                  * is removed from the orphan list in that case.
                  */
@@ -1655,7 +1653,7 @@ static int ext4_writeback_write_end(struct file *file,
         ret2 = ext4_generic_write_end(file, mapping, pos, len, copied,
                                                         page, fsdata);
         copied = ret2;
-        if (pos + len > inode->i_size)
+        if (pos + len > inode->i_size && ext4_can_truncate(inode))
                 /* if we have allocated more blocks and copied
                  * less. We will have blocks allocated outside
                  * inode->i_size. So truncate them
@@ -1670,9 +1668,9 @@ static int ext4_writeback_write_end(struct file *file,
                 ret = ret2;
 
         if (pos + len > inode->i_size) {
-                vmtruncate(inode, inode->i_size);
+                ext4_truncate(inode);
                 /*
-                 * If vmtruncate failed early the inode might still be
+                 * If truncate failed early the inode might still be
                  * on the orphan list; we need to make sure the inode
                  * is removed from the orphan list in that case.
                  */
@@ -1722,7 +1720,7 @@ static int ext4_journalled_write_end(struct file *file,
 
         unlock_page(page);
         page_cache_release(page);
-        if (pos + len > inode->i_size)
+        if (pos + len > inode->i_size && ext4_can_truncate(inode))
                 /* if we have allocated more blocks and copied
                  * less. We will have blocks allocated outside
                  * inode->i_size. So truncate them
@@ -1733,9 +1731,9 @@ static int ext4_journalled_write_end(struct file *file,
         if (!ret)
                 ret = ret2;
         if (pos + len > inode->i_size) {
-                vmtruncate(inode, inode->i_size);
+                ext4_truncate(inode);
                 /*
-                 * If vmtruncate failed early the inode might still be
+                 * If truncate failed early the inode might still be
                  * on the orphan list; we need to make sure the inode
                  * is removed from the orphan list in that case.
                  */
@@ -2305,15 +2303,9 @@ flush_it:
         return;
 }
 
-static int ext4_bh_unmapped_or_delay(handle_t *handle, struct buffer_head *bh)
+static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh)
 {
-        /*
-         * unmapped buffer is possible for holes.
-         * delay buffer is possible with delayed allocation.
-         * We also need to consider unwritten buffer as unmapped.
-         */
-        return (!buffer_mapped(bh) || buffer_delay(bh) ||
-                                buffer_unwritten(bh)) && buffer_dirty(bh);
+        return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh);
 }
 
 /*
@@ -2398,9 +2390,9 @@ static int __mpage_da_writepage(struct page *page,
                          * We need to try to allocate
                          * unmapped blocks in the same page.
                          * Otherwise we won't make progress
-                         * with the page in ext4_da_writepage
+                         * with the page in ext4_writepage
                          */
-                        if (ext4_bh_unmapped_or_delay(NULL, bh)) {
+                        if (ext4_bh_delay_or_unwritten(NULL, bh)) {
                                 mpage_add_bh_to_extent(mpd, logical,
                                                        bh->b_size,
                                                        bh->b_state);
@@ -2517,7 +2509,6 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
          * so call get_block_wrap with create = 0
          */
         ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0);
-        BUG_ON(create && ret == 0);
         if (ret > 0) {
                 bh_result->b_size = (ret << inode->i_blkbits);
                 ret = 0;
@@ -2525,15 +2516,102 @@ static int noalloc_get_block_write(struct inode *inode, sector_t iblock,
         return ret;
 }
 
+static int bget_one(handle_t *handle, struct buffer_head *bh)
+{
+        get_bh(bh);
+        return 0;
+}
+
+static int bput_one(handle_t *handle, struct buffer_head *bh)
+{
+        put_bh(bh);
+        return 0;
+}
+
+static int __ext4_journalled_writepage(struct page *page,
+                                       struct writeback_control *wbc,
+                                       unsigned int len)
+{
+        struct address_space *mapping = page->mapping;
+        struct inode *inode = mapping->host;
+        struct buffer_head *page_bufs;
+        handle_t *handle = NULL;
+        int ret = 0;
+        int err;
+
+        page_bufs = page_buffers(page);
+        BUG_ON(!page_bufs);
+        walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one);
+        /* As soon as we unlock the page, it can go away, but we have
+         * references to buffers so we are safe */
+        unlock_page(page);
+
+        handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
+        if (IS_ERR(handle)) {
+                ret = PTR_ERR(handle);
+                goto out;
+        }
+
+        ret = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+                                do_journal_get_write_access);
+
+        err = walk_page_buffers(handle, page_bufs, 0, len, NULL,
+                                write_end_fn);
+        if (ret == 0)
+                ret = err;
+        err = ext4_journal_stop(handle);
+        if (!ret)
+                ret = err;
+
+        walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one);
+        EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
+out:
+        return ret;
+}
+
 /*
+ * Note that we don't need to start a transaction unless we're journaling data
+ * because we should have holes filled from ext4_page_mkwrite(). We even don't
+ * need to file the inode to the transaction's list in ordered mode because if
+ * we are writing back data added by write(), the inode is already there and if
+ * we are writing back data modified via mmap(), noone guarantees in which
+ * transaction the data will hit the disk. In case we are journaling data, we
+ * cannot start transaction directly because transaction start ranks above page
+ * lock so we have to do some magic.
+ *
  * This function can get called via...
  *   - ext4_da_writepages after taking page lock (have journal handle)
  *   - journal_submit_inode_data_buffers (no journal handle)
  *   - shrink_page_list via pdflush (no journal handle)
  *   - grab_page_cache when doing write_begin (have journal handle)
+ *
+ * We don't do any block allocation in this function. If we have page with
+ * multiple blocks we need to write those buffer_heads that are mapped. This
+ * is important for mmaped based write. So if we do with blocksize 1K
+ * truncate(f, 1024);
+ * a = mmap(f, 0, 4096);
+ * a[0] = 'a';
+ * truncate(f, 4096);
+ * we have in the page first buffer_head mapped via page_mkwrite call back
+ * but other bufer_heads would be unmapped but dirty(dirty done via the
+ * do_wp_page). So writepage should write the first block. If we modify
+ * the mmap area beyond 1024 we will again get a page_fault and the
+ * page_mkwrite callback will do the block allocation and mark the
+ * buffer_heads mapped.
+ *
+ * We redirty the page if we have any buffer_heads that is either delay or
+ * unwritten in the page.
+ *
+ * We can get recursively called as show below.
+ *
+ *      ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
+ *              ext4_writepage()
+ *
+ * But since we don't do any block allocation we should not deadlock.
+ * Page also have the dirty flag cleared so we don't get recurive page_lock.
  */
-static int ext4_da_writepage(struct page *page,
-                                struct writeback_control *wbc)
+static int ext4_writepage(struct page *page,
+                          struct writeback_control *wbc)
 {
         int ret = 0;
         loff_t size;
@@ -2541,7 +2619,7 @@ static int ext4_da_writepage(struct page *page,
         struct buffer_head *page_bufs;
         struct inode *inode = page->mapping->host;
 
-        trace_ext4_da_writepage(inode, page);
+        trace_ext4_writepage(inode, page);
         size = i_size_read(inode);
         if (page->index == size >> PAGE_CACHE_SHIFT)
                 len = size & ~PAGE_CACHE_MASK;
@@ -2551,7 +2629,7 @@ static int ext4_da_writepage(struct page *page,
         if (page_has_buffers(page)) {
                 page_bufs = page_buffers(page);
                 if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
-                                        ext4_bh_unmapped_or_delay)) {
+                                        ext4_bh_delay_or_unwritten)) {
                         /*
                          * We don't want to do  block allocation
                          * So redirty the page and return
@@ -2578,13 +2656,13 @@ static int ext4_da_writepage(struct page *page,
                  * all are mapped and non delay. We don't want to
                  * do block allocation here.
                  */
-                ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
+                ret = block_prepare_write(page, 0, len,
                                           noalloc_get_block_write);
                 if (!ret) {
                         page_bufs = page_buffers(page);
                         /* check whether all are mapped and non delay */
                         if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
-                                                ext4_bh_unmapped_or_delay)) {
+                                                ext4_bh_delay_or_unwritten)) {
                                 redirty_page_for_writepage(wbc, page);
                                 unlock_page(page);
                                 return 0;
@@ -2600,7 +2678,16 @@ static int ext4_da_writepage(struct page *page,
                         return 0;
                 }
                 /* now mark the buffer_heads as dirty and uptodate */
-                block_commit_write(page, 0, PAGE_CACHE_SIZE);
+                block_commit_write(page, 0, len);
+        }
+
+        if (PageChecked(page) && ext4_should_journal_data(inode)) {
+                /*
+                 * It's mmapped pagecache.  Add buffers and journal it.  There
+                 * doesn't seem much point in redirtying the page here.
+                 */
+                ClearPageChecked(page);
+                return __ext4_journalled_writepage(page, wbc, len);
         }
 
         if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
@@ -2907,7 +2994,7 @@ retry:
                  * i_size_read because we hold i_mutex.
                  */
                 if (pos + len > inode->i_size)
-                        vmtruncate(inode, inode->i_size);
+                        ext4_truncate(inode);
         }
 
         if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -3130,222 +3217,6 @@ static sector_t ext4_bmap(struct address_space *mapping, sector_t block)
         return generic_block_bmap(mapping, block, ext4_get_block);
 }
 
-static int bget_one(handle_t *handle, struct buffer_head *bh)
-{
-        get_bh(bh);
-        return 0;
-}
-
-static int bput_one(handle_t *handle, struct buffer_head *bh)
-{
-        put_bh(bh);
-        return 0;
-}
-
-/*
- * Note that we don't need to start a transaction unless we're journaling data
- * because we should have holes filled from ext4_page_mkwrite(). We even don't
- * need to file the inode to the transaction's list in ordered mode because if
- * we are writing back data added by write(), the inode is already there and if
- * we are writing back data modified via mmap(), noone guarantees in which
- * transaction the data will hit the disk. In case we are journaling data, we
- * cannot start transaction directly because transaction start ranks above page
- * lock so we have to do some magic.
- *
- * In all journaling modes block_write_full_page() will start the I/O.
- *
- * Problem:
- *
- *      ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() ->
- *              ext4_writepage()
- *
- * Similar for:
- *
- *      ext4_file_write() -> generic_file_write() -> __alloc_pages() -> ...
- *
- * Same applies to ext4_get_block().  We will deadlock on various things like
- * lock_journal and i_data_sem
- *
- * Setting PF_MEMALLOC here doesn't work - too many internal memory
- * allocations fail.
- *
- * 16May01: If we're reentered then journal_current_handle() will be
- *          non-zero. We simply *return*.
- *
- * 1 July 2001: @@@ FIXME:
- *   In journalled data mode, a data buffer may be metadata against the
- *   current transaction.  But the same file is part of a shared mapping
- *   and someone does a writepage() on it.
- *
- *   We will move the buffer onto the async_data list, but *after* it has
- *   been dirtied. So there's a small window where we have dirty data on
- *   BJ_Metadata.
- *
- *   Note that this only applies to the last partial page in the file.  The
- *   bit which block_write_full_page() uses prepare/commit for.  (That's
- *   broken code anyway: it's wrong for msync()).
- *
- *   It's a rare case: affects the final partial page, for journalled data
- *   where the file is subject to bith write() and writepage() in the same
- *   transction.  To fix it we'll need a custom block_write_full_page().
- *   We'll probably need that anyway for journalling writepage() output.
- *
- * We don't honour synchronous mounts for writepage().  That would be
- * disastrous.  Any write() or metadata operation will sync the fs for
- * us.
- *
- */
-static int __ext4_normal_writepage(struct page *page,
-                                   struct writeback_control *wbc)
-{
-        struct inode *inode = page->mapping->host;
-
-        if (test_opt(inode->i_sb, NOBH))
-                return nobh_writepage(page, noalloc_get_block_write, wbc);
-        else
-                return block_write_full_page(page, noalloc_get_block_write,
-                                             wbc);
-}
-
-static int ext4_normal_writepage(struct page *page,
-                                 struct writeback_control *wbc)
-{
-        struct inode *inode = page->mapping->host;
-        loff_t size = i_size_read(inode);
-        loff_t len;
-
-        trace_ext4_normal_writepage(inode, page);
-        J_ASSERT(PageLocked(page));
-        if (page->index == size >> PAGE_CACHE_SHIFT)
-                len = size & ~PAGE_CACHE_MASK;
-        else
-                len = PAGE_CACHE_SIZE;
-
-        if (page_has_buffers(page)) {
-                /* if page has buffers it should all be mapped
-                 * and allocated. If there are not buffers attached
-                 * to the page we know the page is dirty but it lost
-                 * buffers. That means that at some moment in time
-                 * after write_begin() / write_end() has been called
-                 * all buffers have been clean and thus they must have been
-                 * written at least once. So they are all mapped and we can
-                 * happily proceed with mapping them and writing the page.
-                 */
-                BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
-                                        ext4_bh_unmapped_or_delay));
-        }
-
-        if (!ext4_journal_current_handle())
-                return __ext4_normal_writepage(page, wbc);
-
-        redirty_page_for_writepage(wbc, page);
-        unlock_page(page);
-        return 0;
-}
-
-static int __ext4_journalled_writepage(struct page *page,
-                                       struct writeback_control *wbc)
-{
-        struct address_space *mapping = page->mapping;
-        struct inode *inode = mapping->host;
-        struct buffer_head *page_bufs;
-        handle_t *handle = NULL;
-        int ret = 0;
-        int err;
-
-        ret = block_prepare_write(page, 0, PAGE_CACHE_SIZE,
-                                  noalloc_get_block_write);
-        if (ret != 0)
-                goto out_unlock;
-
-        page_bufs = page_buffers(page);
-        walk_page_buffers(handle, page_bufs, 0, PAGE_CACHE_SIZE, NULL,
-                                                                bget_one);
-        /* As soon as we unlock the page, it can go away, but we have
-         * references to buffers so we are safe */
-        unlock_page(page);
-
-        handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode));
-        if (IS_ERR(handle)) {
-                ret = PTR_ERR(handle);
-                goto out;
-        }
-
-        ret = walk_page_buffers(handle, page_bufs, 0,
-                        PAGE_CACHE_SIZE, NULL, do_journal_get_write_access);
-
-        err = walk_page_buffers(handle, page_bufs, 0,
-                                PAGE_CACHE_SIZE, NULL, write_end_fn);
-        if (ret == 0)
-                ret = err;
-        err = ext4_journal_stop(handle);
-        if (!ret)
-                ret = err;
-
-        walk_page_buffers(handle, page_bufs, 0,
-                                PAGE_CACHE_SIZE, NULL, bput_one);
-        EXT4_I(inode)->i_state |= EXT4_STATE_JDATA;
-        goto out;
-
-out_unlock:
-        unlock_page(page);
-out:
-        return ret;
-}
-
-static int ext4_journalled_writepage(struct page *page,
-                                     struct writeback_control *wbc)
-{
-        struct inode *inode = page->mapping->host;
-        loff_t size = i_size_read(inode);
-        loff_t len;
-
-        trace_ext4_journalled_writepage(inode, page);
-        J_ASSERT(PageLocked(page));
-        if (page->index == size >> PAGE_CACHE_SHIFT)
-                len = size & ~PAGE_CACHE_MASK;
-        else
-                len = PAGE_CACHE_SIZE;
-
-        if (page_has_buffers(page)) {
-                /* if page has buffers it should all be mapped
-                 * and allocated. If there are not buffers attached
-                 * to the page we know the page is dirty but it lost
-                 * buffers. That means that at some moment in time
-                 * after write_begin() / write_end() has been called
-                 * all buffers have been clean and thus they must have been
-                 * written at least once. So they are all mapped and we can
-                 * happily proceed with mapping them and writing the page.
-                 */
-                BUG_ON(walk_page_buffers(NULL, page_buffers(page), 0, len, NULL,
-                                        ext4_bh_unmapped_or_delay));
-        }
-
-        if (ext4_journal_current_handle())
-                goto no_write;
-
-        if (PageChecked(page)) {
-                /*
-                 * It's mmapped pagecache.  Add buffers and journal it.  There
-                 * doesn't seem much point in redirtying the page here.
-                 */
-                ClearPageChecked(page);
-                return __ext4_journalled_writepage(page, wbc);
-        } else {
-                /*
-                 * It may be a page full of checkpoint-mode buffers.  We don't
-                 * really know unless we go poke around in the buffer_heads.
-                 * But block_write_full_page will do the right thing.
-                 */
-                return block_write_full_page(page, noalloc_get_block_write,
-                                             wbc);
-        }
-no_write:
-        redirty_page_for_writepage(wbc, page);
-        unlock_page(page);
-        return 0;
-}
-
 static int ext4_readpage(struct file *file, struct page *page)
 {
         return mpage_readpage(page, ext4_get_block);
@@ -3492,7 +3363,7 @@ static int ext4_journalled_set_page_dirty(struct page *page)
 static const struct address_space_operations ext4_ordered_aops = {
         .readpage               = ext4_readpage,
         .readpages              = ext4_readpages,
-        .writepage              = ext4_normal_writepage,
+        .writepage              = ext4_writepage,
         .sync_page              = block_sync_page,
         .write_begin            = ext4_write_begin,
         .write_end              = ext4_ordered_write_end,
@@ -3507,7 +3378,7 @@ static const struct address_space_operations ext4_ordered_aops = {
 static const struct address_space_operations ext4_writeback_aops = {
         .readpage               = ext4_readpage,
         .readpages              = ext4_readpages,
-        .writepage              = ext4_normal_writepage,
+        .writepage              = ext4_writepage,
         .sync_page              = block_sync_page,
         .write_begin            = ext4_write_begin,
         .write_end              = ext4_writeback_write_end,
@@ -3522,7 +3393,7 @@ static const struct address_space_operations ext4_writeback_aops = {
 static const struct address_space_operations ext4_journalled_aops = {
         .readpage               = ext4_readpage,
         .readpages              = ext4_readpages,
-        .writepage              = ext4_journalled_writepage,
+        .writepage              = ext4_writepage,
         .sync_page              = block_sync_page,
         .write_begin            = ext4_write_begin,
         .write_end              = ext4_journalled_write_end,
@@ -3536,7 +3407,7 @@ static const struct address_space_operations ext4_journalled_aops = {
 static const struct address_space_operations ext4_da_aops = {
         .readpage               = ext4_readpage,
         .readpages              = ext4_readpages,
-        .writepage              = ext4_da_writepage,
+        .writepage              = ext4_writepage,
         .writepages             = ext4_da_writepages,
         .sync_page              = block_sync_page,
         .write_begin            = ext4_da_write_begin,
@@ -3583,7 +3454,8 @@ int ext4_block_truncate_page(handle_t *handle,
         struct page *page;
         int err = 0;
 
-        page = grab_cache_page(mapping, from >> PAGE_CACHE_SHIFT);
+        page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT,
+                                   mapping_gfp_mask(mapping) & ~__GFP_FS);
         if (!page)
                 return -EINVAL;
 
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bb415408fdb6..7050a9cd04a4 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -12,7 +12,6 @@
 #include <linux/capability.h>
 #include <linux/time.h>
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/mount.h>
 #include <linux/file.h>
 #include <asm/uaccess.h>
@@ -192,7 +191,7 @@ setversion_out:
         case EXT4_IOC_GROUP_EXTEND: {
                 ext4_fsblk_t n_blocks_count;
                 struct super_block *sb = inode->i_sb;
-                int err, err2;
+                int err, err2=0;
 
                 if (!capable(CAP_SYS_RESOURCE))
                         return -EPERM;
@@ -205,9 +204,11 @@ setversion_out:
                         return err;
 
                 err = ext4_group_extend(sb, EXT4_SB(sb)->s_es, n_blocks_count);
-                jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
-                err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
-                jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+                if (EXT4_SB(sb)->s_journal) {
+                        jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+                        err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+                        jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+                }
                 if (err == 0)
                         err = err2;
                 mnt_drop_write(filp->f_path.mnt);
@@ -252,7 +253,7 @@ setversion_out:
         case EXT4_IOC_GROUP_ADD: {
                 struct ext4_new_group_data input;
                 struct super_block *sb = inode->i_sb;
-                int err, err2;
+                int err, err2=0;
 
                 if (!capable(CAP_SYS_RESOURCE))
                         return -EPERM;
@@ -266,9 +267,11 @@ setversion_out:
                         return err;
 
                 err = ext4_group_add(sb, &input);
-                jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
-                err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
-                jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+                if (EXT4_SB(sb)->s_journal) {
+                        jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+                        err2 = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+                        jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+                }
                 if (err == 0)
                         err = err2;
                 mnt_drop_write(filp->f_path.mnt);
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 519a0a686d94..cd258463e2a9 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -657,7 +657,8 @@ static void ext4_mb_mark_free_simple(struct super_block *sb,
         }
 }
 
-static void ext4_mb_generate_buddy(struct super_block *sb,
+static noinline_for_stack
+void ext4_mb_generate_buddy(struct super_block *sb,
                                 void *buddy, void *bitmap, ext4_group_t group)
 {
         struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -1480,7 +1481,8 @@ static void ext4_mb_measure_extent(struct ext4_allocation_context *ac,
         ext4_mb_check_limits(ac, e4b, 0);
 }
 
-static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
                                         struct ext4_buddy *e4b)
 {
         struct ext4_free_extent ex = ac->ac_b_ex;
@@ -1507,7 +1509,8 @@ static int ext4_mb_try_best_found(struct ext4_allocation_context *ac,
         return 0;
 }
 
-static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
+static noinline_for_stack
+int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
                                 struct ext4_buddy *e4b)
 {
         ext4_group_t group = ac->ac_g_ex.fe_group;
@@ -1566,7 +1569,8 @@ static int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
  * The routine scans buddy structures (not bitmap!) from given order
  * to max order and tries to find big enough chunk to satisfy the req
  */
-static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
                                         struct ext4_buddy *e4b)
 {
         struct super_block *sb = ac->ac_sb;
@@ -1609,7 +1613,8 @@ static void ext4_mb_simple_scan_group(struct ext4_allocation_context *ac,
  * In order to optimize scanning, caller must pass number of
  * free blocks in the group, so the routine can know upper limit.
  */
-static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
                                         struct ext4_buddy *e4b)
 {
         struct super_block *sb = ac->ac_sb;
@@ -1668,7 +1673,8 @@ static void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
  * we try to find stripe-aligned chunks for stripe-size requests
  * XXX should do so at least for multiples of stripe size as well
  */
-static void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
+static noinline_for_stack
+void ext4_mb_scan_aligned(struct ext4_allocation_context *ac,
                                  struct ext4_buddy *e4b)
 {
         struct super_block *sb = ac->ac_sb;
@@ -1831,7 +1837,8 @@ void ext4_mb_put_buddy_cache_lock(struct super_block *sb,
 
 }
 
-static int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
+static noinline_for_stack
+int ext4_mb_init_group(struct super_block *sb, ext4_group_t group)
 {
 
         int ret;
@@ -2902,7 +2909,11 @@ int __init init_ext4_mballoc(void)
 
 void exit_ext4_mballoc(void)
 {
-        /* XXX: synchronize_rcu(); */
+        /* 
+         * Wait for completion of call_rcu()'s on ext4_pspace_cachep
+         * before destroying the slab cache.
+         */
+        rcu_barrier();
         kmem_cache_destroy(ext4_pspace_cachep);
         kmem_cache_destroy(ext4_ac_cachep);
         kmem_cache_destroy(ext4_free_ext_cachep);
@@ -3457,7 +3468,8 @@ static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
  * used in in-core bitmap. buddy must be generated from this bitmap
  * Need to be called with ext4 group lock held
  */
-static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
+static noinline_for_stack
+void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
                                         ext4_group_t group)
 {
         struct ext4_group_info *grp = ext4_get_group_info(sb, group);
@@ -4215,14 +4227,9 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
         ext4_get_group_no_and_offset(sb, goal, &group, &block);
 
         /* set up allocation goals */
+        memset(ac, 0, sizeof(struct ext4_allocation_context));
         ac->ac_b_ex.fe_logical = ar->logical;
-        ac->ac_b_ex.fe_group = 0;
-        ac->ac_b_ex.fe_start = 0;
-        ac->ac_b_ex.fe_len = 0;
         ac->ac_status = AC_STATUS_CONTINUE;
-        ac->ac_groups_scanned = 0;
-        ac->ac_ex_scanned = 0;
-        ac->ac_found = 0;
         ac->ac_sb = sb;
         ac->ac_inode = ar->inode;
         ac->ac_o_ex.fe_logical = ar->logical;
@@ -4233,15 +4240,7 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac,
         ac->ac_g_ex.fe_group = group;
         ac->ac_g_ex.fe_start = block;
         ac->ac_g_ex.fe_len = len;
-        ac->ac_f_ex.fe_len = 0;
         ac->ac_flags = ar->flags;
-        ac->ac_2order = 0;
-        ac->ac_criteria = 0;
-        ac->ac_pa = NULL;
-        ac->ac_bitmap_page = NULL;
-        ac->ac_buddy_page = NULL;
-        ac->alloc_semp = NULL;
-        ac->ac_lg = NULL;
 
         /* we have to define context: we'll we work with a file or
          * locality group. this is a policy, actually */
@@ -4509,10 +4508,7 @@ ext4_fsblk_t ext4_mb_new_blocks(handle_t *handle,
         }
 
         ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
-        if (ac) {
-                ac->ac_sb = sb;
-                ac->ac_inode = ar->inode;
-        } else {
+        if (!ac) {
                 ar->len = 0;
                 *errp = -ENOMEM;
                 goto out1;
diff --git a/fs/fat/dir.c b/fs/fat/dir.c
index 38ff75a0fe22..530b4ca01510 100644
--- a/fs/fat/dir.c
+++ b/fs/fat/dir.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/compat.h>
 #include <asm/uaccess.h>
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 82f88733b681..bbc94ae4fd77 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/time.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include "fat.h"
 
 /* Characters that are undesirable in an MS-DOS file name */
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index 73471b7ecc8c..cb6e83557112 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -19,7 +19,6 @@
 #include <linux/jiffies.h>
 #include <linux/ctype.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/namei.h>
 #include "fat.h"
diff --git a/fs/fcntl.c b/fs/fcntl.c
index a040b764f8e3..ae413086db97 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -19,7 +19,6 @@
 #include <linux/signal.h>
 #include <linux/rcupdate.h>
 #include <linux/pid_namespace.h>
-#include <linux/smp_lock.h>
 
 #include <asm/poll.h>
 #include <asm/siginfo.h>
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index cdbd1654e4cd..1e8af939b3e4 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -38,6 +38,7 @@
 #include <linux/buffer_head.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/stat.h>
 #include <linux/vfs.h>
 #include <linux/mount.h>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index cbceacbc0bf9..6484eb75acd6 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -16,7 +16,6 @@
 #include <linux/pagemap.h>
 #include <linux/file.h>
 #include <linux/slab.h>
-#include <linux/blkdev.h>
 
 MODULE_ALIAS_MISCDEV(FUSE_MINOR);
 
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 03ebb439ace0..7ebae9a4ecc0 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -624,6 +624,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 {
         struct gfs2_inode *ip = GFS2_I(mapping->host);
         struct gfs2_sbd *sdp = GFS2_SB(mapping->host);
+        struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
         unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
         int alloc_required;
         int error = 0;
@@ -637,6 +638,14 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
         error = gfs2_glock_nq(&ip->i_gh);
         if (unlikely(error))
                 goto out_uninit;
+        if (&ip->i_inode == sdp->sd_rindex) {
+                error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE,
+                                           GL_NOCACHE, &m_ip->i_gh);
+                if (unlikely(error)) {
+                        gfs2_glock_dq(&ip->i_gh);
+                        goto out_uninit;
+                }
+        }
 
         error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
         if (error)
@@ -667,6 +676,8 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
                 rblocks += data_blocks ? data_blocks : 1;
         if (ind_blocks || data_blocks)
                 rblocks += RES_STATFS + RES_QUOTA;
+        if (&ip->i_inode == sdp->sd_rindex)
+                rblocks += 2 * RES_STATFS;
 
         error = gfs2_trans_begin(sdp, rblocks,
                                  PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
@@ -712,6 +723,10 @@ out_alloc_put:
                 gfs2_alloc_put(ip);
         }
 out_unlock:
+        if (&ip->i_inode == sdp->sd_rindex) {
+                gfs2_glock_dq(&m_ip->i_gh);
+                gfs2_holder_uninit(&m_ip->i_gh);
+        }
         gfs2_glock_dq(&ip->i_gh);
 out_uninit:
         gfs2_holder_uninit(&ip->i_gh);
@@ -725,14 +740,21 @@ out_uninit:
 static void adjust_fs_space(struct inode *inode)
 {
         struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+        struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+        struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
         struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
         struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+        struct buffer_head *m_bh, *l_bh;
         u64 fs_total, new_free;
 
         /* Total up the file system space, according to the latest rindex. */
         fs_total = gfs2_ri_total(sdp);
+        if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0)
+                return;
 
         spin_lock(&sdp->sd_statfs_spin);
+        gfs2_statfs_change_in(m_sc, m_bh->b_data +
+                              sizeof(struct gfs2_dinode));
         if (fs_total > (m_sc->sc_total + l_sc->sc_total))
                 new_free = fs_total - (m_sc->sc_total + l_sc->sc_total);
         else
@@ -741,6 +763,13 @@ static void adjust_fs_space(struct inode *inode)
         fs_warn(sdp, "File system extended by %llu blocks.\n",
                 (unsigned long long)new_free);
         gfs2_statfs_change(sdp, new_free, new_free, 0);
+
+        if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0)
+                goto out;
+        update_statfs(sdp, m_bh, l_bh);
+        brelse(l_bh);
+out:
+        brelse(m_bh);
 }
 
 /**
@@ -763,6 +792,7 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 {
         struct gfs2_inode *ip = GFS2_I(inode);
         struct gfs2_sbd *sdp = GFS2_SB(inode);
+        struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
         u64 to = pos + copied;
         void *kaddr;
         unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
@@ -794,6 +824,10 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 
         brelse(dibh);
         gfs2_trans_end(sdp);
+        if (inode == sdp->sd_rindex) {
+                gfs2_glock_dq(&m_ip->i_gh);
+                gfs2_holder_uninit(&m_ip->i_gh);
+        }
         gfs2_glock_dq(&ip->i_gh);
         gfs2_holder_uninit(&ip->i_gh);
         return copied;
@@ -823,6 +857,7 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
         struct inode *inode = page->mapping->host;
         struct gfs2_inode *ip = GFS2_I(inode);
         struct gfs2_sbd *sdp = GFS2_SB(inode);
+        struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
         struct buffer_head *dibh;
         struct gfs2_alloc *al = ip->i_alloc;
         unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
@@ -865,6 +900,10 @@ failed:
                 gfs2_quota_unlock(ip);
                 gfs2_alloc_put(ip);
         }
+        if (inode == sdp->sd_rindex) {
+                gfs2_glock_dq(&m_ip->i_gh);
+                gfs2_holder_uninit(&m_ip->i_gh);
+        }
         gfs2_glock_dq(&ip->i_gh);
         gfs2_holder_uninit(&ip->i_gh);
         return ret;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 297421c0427a..8b674b1f3a55 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -63,6 +63,7 @@ static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int
 static DECLARE_RWSEM(gfs2_umount_flush_sem);
 static struct dentry *gfs2_root;
 static struct workqueue_struct *glock_workqueue;
+struct workqueue_struct *gfs2_delete_workqueue;
 static LIST_HEAD(lru_list);
 static atomic_t lru_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(lru_lock);
@@ -167,13 +168,33 @@ static void glock_free(struct gfs2_glock *gl)
  *
  */
 
-static void gfs2_glock_hold(struct gfs2_glock *gl)
+void gfs2_glock_hold(struct gfs2_glock *gl)
 {
         GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
         atomic_inc(&gl->gl_ref);
 }
 
 /**
+ * demote_ok - Check to see if it's ok to unlock a glock
+ * @gl: the glock
+ *
+ * Returns: 1 if it's ok
+ */
+
+static int demote_ok(const struct gfs2_glock *gl)
+{
+        const struct gfs2_glock_operations *glops = gl->gl_ops;
+
+        if (gl->gl_state == LM_ST_UNLOCKED)
+                return 0;
+        if (!list_empty(&gl->gl_holders))
+                return 0;
+        if (glops->go_demote_ok)
+                return glops->go_demote_ok(gl);
+        return 1;
+}
+
+/**
  * gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
  * @gl: the glock
  *
@@ -181,8 +202,13 @@ static void gfs2_glock_hold(struct gfs2_glock *gl)
 
 static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 {
+        int may_reclaim;
+        may_reclaim = (demote_ok(gl) &&
+                       (atomic_read(&gl->gl_ref) == 1 ||
+                        (gl->gl_name.ln_type == LM_TYPE_INODE &&
+                         atomic_read(&gl->gl_ref) <= 2)));
         spin_lock(&lru_lock);
-        if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) {
+        if (list_empty(&gl->gl_lru) && may_reclaim) {
                 list_add_tail(&gl->gl_lru, &lru_list);
                 atomic_inc(&lru_count);
         }
@@ -190,6 +216,21 @@ static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 }
 
 /**
+ * gfs2_glock_put_nolock() - Decrement reference count on glock
+ * @gl: The glock to put
+ *
+ * This function should only be used if the caller has its own reference
+ * to the glock, in addition to the one it is dropping.
+ */
+
+void gfs2_glock_put_nolock(struct gfs2_glock *gl)
+{
+        if (atomic_dec_and_test(&gl->gl_ref))
+                GLOCK_BUG_ON(gl, 1);
+        gfs2_glock_schedule_for_reclaim(gl);
+}
+
+/**
  * gfs2_glock_put() - Decrement reference count on glock
  * @gl: The glock to put
  *
@@ -214,9 +255,9 @@ int gfs2_glock_put(struct gfs2_glock *gl)
                 rv = 1;
                 goto out;
         }
-        /* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */
-        if (atomic_read(&gl->gl_ref) == 2)
-                gfs2_glock_schedule_for_reclaim(gl);
+        spin_lock(&gl->gl_spin);
+        gfs2_glock_schedule_for_reclaim(gl);
+        spin_unlock(&gl->gl_spin);
         write_unlock(gl_lock_addr(gl->gl_hash));
 out:
         return rv;
@@ -398,7 +439,7 @@ static void state_change(struct gfs2_glock *gl, unsigned int new_state)
                 if (held2)
                         gfs2_glock_hold(gl);
                 else
-                        gfs2_glock_put(gl);
+                        gfs2_glock_put_nolock(gl);
         }
 
         gl->gl_state = new_state;
@@ -633,12 +674,35 @@ out:
 out_sched:
         gfs2_glock_hold(gl);
         if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-                gfs2_glock_put(gl);
+                gfs2_glock_put_nolock(gl);
 out_unlock:
         clear_bit(GLF_LOCK, &gl->gl_flags);
         goto out;
 }
 
+static void delete_work_func(struct work_struct *work)
+{
+        struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
+        struct gfs2_sbd *sdp = gl->gl_sbd;
+        struct gfs2_inode *ip = NULL;
+        struct inode *inode;
+        u64 no_addr = 0;
+
+        spin_lock(&gl->gl_spin);
+        ip = (struct gfs2_inode *)gl->gl_object;
+        if (ip)
+                no_addr = ip->i_no_addr;
+        spin_unlock(&gl->gl_spin);
+        if (ip) {
+                inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+                if (inode) {
+                        d_prune_aliases(inode);
+                        iput(inode);
+                }
+        }
+        gfs2_glock_put(gl);
+}
+
 static void glock_work_func(struct work_struct *work)
 {
         unsigned long delay = 0;
@@ -717,6 +781,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
         gl->gl_sbd = sdp;
         gl->gl_aspace = NULL;
         INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
+        INIT_WORK(&gl->gl_delete, delete_work_func);
 
         /* If this glock protects actual on-disk data or metadata blocks,
            create a VFS inode to manage the pages/buffers holding them. */
@@ -858,6 +923,8 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state,
                         gl->gl_demote_state != state) {
                 gl->gl_demote_state = LM_ST_UNLOCKED;
         }
+        if (gl->gl_ops->go_callback)
+                gl->gl_ops->go_callback(gl);
         trace_gfs2_demote_rq(gl);
 }
 
@@ -1274,33 +1341,12 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
                 gfs2_glock_put(gl);
 }
 
-/**
- * demote_ok - Check to see if it's ok to unlock a glock
- * @gl: the glock
- *
- * Returns: 1 if it's ok
- */
-
-static int demote_ok(const struct gfs2_glock *gl)
-{
-        const struct gfs2_glock_operations *glops = gl->gl_ops;
-
-        if (gl->gl_state == LM_ST_UNLOCKED)
-                return 0;
-        if (!list_empty(&gl->gl_holders))
-                return 0;
-        if (glops->go_demote_ok)
-                return glops->go_demote_ok(gl);
-        return 1;
-}
-
 
 static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 {
         struct gfs2_glock *gl;
         int may_demote;
         int nr_skipped = 0;
-        int got_ref = 0;
         LIST_HEAD(skipped);
 
         if (nr == 0)
@@ -1315,37 +1361,29 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
                 list_del_init(&gl->gl_lru);
                 atomic_dec(&lru_count);
 
+                /* Check if glock is about to be freed */
+                if (atomic_read(&gl->gl_ref) == 0)
+                        continue;
+
                 /* Test for being demotable */
                 if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
                         gfs2_glock_hold(gl);
-                        got_ref = 1;
                         spin_unlock(&lru_lock);
                         spin_lock(&gl->gl_spin);
                         may_demote = demote_ok(gl);
-                        spin_unlock(&gl->gl_spin);
-                        clear_bit(GLF_LOCK, &gl->gl_flags);
                         if (may_demote) {
                                 handle_callback(gl, LM_ST_UNLOCKED, 0);
                                 nr--;
-                                if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-                                        gfs2_glock_put(gl);
-                                got_ref = 0;
                         }
+                        if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
+                                gfs2_glock_put_nolock(gl);
+                        spin_unlock(&gl->gl_spin);
+                        clear_bit(GLF_LOCK, &gl->gl_flags);
                         spin_lock(&lru_lock);
-                        if (may_demote)
-                                continue;
-                }
-                if (list_empty(&gl->gl_lru) &&
-                    (atomic_read(&gl->gl_ref) <= (2 + got_ref))) {
-                        nr_skipped++;
-                        list_add(&gl->gl_lru, &skipped);
-                }
-                if (got_ref) {
-                        spin_unlock(&lru_lock);
-                        gfs2_glock_put(gl);
-                        spin_lock(&lru_lock);
-                        got_ref = 0;
+                        continue;
                 }
+                nr_skipped++;
+                list_add(&gl->gl_lru, &skipped);
         }
         list_splice(&skipped, &lru_list);
         atomic_add(nr_skipped, &lru_count);
@@ -1727,6 +1765,11 @@ int __init gfs2_glock_init(void)
         glock_workqueue = create_workqueue("glock_workqueue");
         if (IS_ERR(glock_workqueue))
                 return PTR_ERR(glock_workqueue);
+        gfs2_delete_workqueue = create_workqueue("delete_workqueue");
+        if (IS_ERR(gfs2_delete_workqueue)) {
+                destroy_workqueue(glock_workqueue);
+                return PTR_ERR(gfs2_delete_workqueue);
+        }
 
         register_shrinker(&glock_shrinker);
 
@@ -1737,6 +1780,7 @@ void gfs2_glock_exit(void)
 {
         unregister_shrinker(&glock_shrinker);
         destroy_workqueue(glock_workqueue);
+        destroy_workqueue(gfs2_delete_workqueue);
 }
 
 static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index a602a28f6f08..c609894ec0d0 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -143,6 +143,7 @@ struct lm_lockops {
 
 #define GLR_TRYFAILED           13
 
+extern struct workqueue_struct *gfs2_delete_workqueue;
 static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
 {
         struct gfs2_holder *gh;
@@ -191,6 +192,8 @@ static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl)
 int gfs2_glock_get(struct gfs2_sbd *sdp,
                    u64 number, const struct gfs2_glock_operations *glops,
                    int create, struct gfs2_glock **glp);
+void gfs2_glock_hold(struct gfs2_glock *gl);
+void gfs2_glock_put_nolock(struct gfs2_glock *gl);
 int gfs2_glock_put(struct gfs2_glock *gl);
 void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
                       struct gfs2_holder *gh);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d5e4ab155ca0..6985eef06c39 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -323,6 +323,7 @@ static void trans_go_sync(struct gfs2_glock *gl)
 
         if (gl->gl_state != LM_ST_UNLOCKED &&
             test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
+                flush_workqueue(gfs2_delete_workqueue);
                 gfs2_meta_syncfs(sdp);
                 gfs2_log_shutdown(sdp);
         }
@@ -372,6 +373,25 @@ static int trans_go_demote_ok(const struct gfs2_glock *gl)
         return 0;
 }
 
+/**
+ * iopen_go_callback - schedule the dcache entry for the inode to be deleted
+ * @gl: the glock
+ *
+ * gl_spin lock is held while calling this
+ */
+static void iopen_go_callback(struct gfs2_glock *gl)
+{
+        struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+
+        if (gl->gl_demote_state == LM_ST_UNLOCKED &&
+            gl->gl_state == LM_ST_SHARED &&
+            ip && test_bit(GIF_USER, &ip->i_flags)) {
+                gfs2_glock_hold(gl);
+                if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+                        gfs2_glock_put_nolock(gl);
+        }
+}
+
 const struct gfs2_glock_operations gfs2_meta_glops = {
         .go_type = LM_TYPE_META,
 };
@@ -406,6 +426,7 @@ const struct gfs2_glock_operations gfs2_trans_glops = {
 
 const struct gfs2_glock_operations gfs2_iopen_glops = {
         .go_type = LM_TYPE_IOPEN,
+        .go_callback = iopen_go_callback,
 };
 
 const struct gfs2_glock_operations gfs2_flock_glops = {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 225347fbff3c..61801ada36f0 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -159,6 +159,7 @@ struct gfs2_glock_operations {
         int (*go_lock) (struct gfs2_holder *gh);
         void (*go_unlock) (struct gfs2_holder *gh);
         int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
+        void (*go_callback) (struct gfs2_glock *gl);
         const int go_type;
         const unsigned long go_min_hold_time;
 };
@@ -228,6 +229,7 @@ struct gfs2_glock {
         struct list_head gl_ail_list;
         atomic_t gl_ail_count;
         struct delayed_work gl_work;
+        struct work_struct gl_delete;
 };
 
 #define GFS2_MIN_LVB_SIZE 32    /* Min size of LVB that gfs2 supports */
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index daa4ae341a29..fba795798d3a 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -285,27 +285,19 @@ void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd)
         }
 
         tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
-        if (count[1] + count[2] != tmp) {
+        if (count[1] != tmp) {
                 if (gfs2_consist_rgrpd(rgd))
                         fs_err(sdp, "used data mismatch:  %u != %u\n",
                                count[1], tmp);
                 return;
         }
 
-        if (count[3] != rgd->rd_dinodes) {
+        if (count[2] + count[3] != rgd->rd_dinodes) {
                 if (gfs2_consist_rgrpd(rgd))
                         fs_err(sdp, "used metadata mismatch:  %u != %u\n",
-                               count[3], rgd->rd_dinodes);
+                               count[2] + count[3], rgd->rd_dinodes);
                 return;
         }
-
-        if (count[2] > count[3]) {
-                if (gfs2_consist_rgrpd(rgd))
-                        fs_err(sdp, "unlinked inodes > inodes:  %u\n",
-                               count[2]);
-                return;
-        }
-
 }
 
 static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
@@ -961,7 +953,8 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
  * Returns: The inode, if one has been found
  */
 
-static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
+static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
+                                     u64 skip)
 {
         struct inode *inode;
         u32 goal = 0, block;
@@ -985,6 +978,8 @@ static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
                 goal++;
                 if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
                         continue;
+                if (no_addr == skip)
+                        continue;
                 *last_unlinked = no_addr;
                 inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN,
                                           no_addr, -1, 1);
@@ -1104,7 +1099,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
                         if (try_rgrp_fit(rgd, al))
                                 goto out;
                         if (rgd->rd_flags & GFS2_RDF_CHECK)
-                                inode = try_rgrp_unlink(rgd, last_unlinked);
+                                inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
                         if (!rg_locked)
                                 gfs2_glock_dq_uninit(&al->al_rgd_gh);
                         if (inode)
@@ -1138,7 +1133,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
                         if (try_rgrp_fit(rgd, al))
                                 goto out;
                         if (rgd->rd_flags & GFS2_RDF_CHECK)
-                                inode = try_rgrp_unlink(rgd, last_unlinked);
+                                inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
                         if (!rg_locked)
                                 gfs2_glock_dq_uninit(&al->al_rgd_gh);
                         if (inode)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 0a6801336470..f522bb017973 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -353,7 +353,7 @@ fail:
         return error;
 }
 
-static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
+void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
 {
         const struct gfs2_statfs_change *str = buf;
 
@@ -441,6 +441,29 @@ void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
         brelse(l_bh);
 }
 
+void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+                   struct buffer_head *l_bh)
+{
+        struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+        struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
+        struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+        struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+        gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
+
+        spin_lock(&sdp->sd_statfs_spin);
+        m_sc->sc_total += l_sc->sc_total;
+        m_sc->sc_free += l_sc->sc_free;
+        m_sc->sc_dinodes += l_sc->sc_dinodes;
+        memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
+        memset(l_bh->b_data + sizeof(struct gfs2_dinode),
+               0, sizeof(struct gfs2_statfs_change));
+        spin_unlock(&sdp->sd_statfs_spin);
+
+        gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
+        gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+}
+
 int gfs2_statfs_sync(struct gfs2_sbd *sdp)
 {
         struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
@@ -477,19 +500,7 @@ int gfs2_statfs_sync(struct gfs2_sbd *sdp)
         if (error)
                 goto out_bh2;
 
-        gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
-
-        spin_lock(&sdp->sd_statfs_spin);
-        m_sc->sc_total += l_sc->sc_total;
-        m_sc->sc_free += l_sc->sc_free;
-        m_sc->sc_dinodes += l_sc->sc_dinodes;
-        memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
-        memset(l_bh->b_data + sizeof(struct gfs2_dinode),
-               0, sizeof(struct gfs2_statfs_change));
-        spin_unlock(&sdp->sd_statfs_spin);
-
-        gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
-        gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+        update_statfs(sdp, m_bh, l_bh);
 
         gfs2_trans_end(sdp);
 
@@ -680,6 +691,7 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
         struct gfs2_holder t_gh;
         int error;
 
+        flush_workqueue(gfs2_delete_workqueue);
         gfs2_quota_sync(sdp);
         gfs2_statfs_sync(sdp);
 
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index b56413e3e40d..22e0417ed996 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -40,6 +40,10 @@ extern int gfs2_make_fs_rw(struct gfs2_sbd *sdp);
 extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
 extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
                                s64 dinodes);
+extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
+                                  const void *buf);
+extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+                          struct buffer_head *l_bh);
 extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
 
 extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/trace_gfs2.h b/fs/gfs2/trace_gfs2.h
index 98d6ef1c1dc0..148d55c14171 100644
--- a/fs/gfs2/trace_gfs2.h
+++ b/fs/gfs2/trace_gfs2.h
@@ -1,12 +1,11 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gfs2
+
 #if !defined(_TRACE_GFS2_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_GFS2_H
 
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM gfs2
-#define TRACE_INCLUDE_FILE trace_gfs2
-
 #include <linux/fs.h>
 #include <linux/buffer_head.h>
 #include <linux/dlmconstants.h>
@@ -403,5 +402,6 @@ TRACE_EVENT(gfs2_block_alloc,
 /* This part must be outside protection */
 #undef TRACE_INCLUDE_PATH
 #define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace_gfs2
 #include <trace/define_trace.h>
 
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 6f833dc8e910..f7fcbe49da72 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -19,6 +19,7 @@
 #include <linux/nls.h>
 #include <linux/parser.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 
 #include "hfs_fs.h"
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 9fc3af0c0dab..c0759fe0855b 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -12,6 +12,7 @@
 #include <linux/pagemap.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 #include <linux/nls.h>
 
diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c
index 6916c41d7017..8865c94f55f6 100644
--- a/fs/hpfs/dir.c
+++ b/fs/hpfs/dir.c
@@ -6,6 +6,7 @@
  *  directory VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 static int hpfs_dir_release(struct inode *inode, struct file *filp)
diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c
index 64ab52259204..3efabff00367 100644
--- a/fs/hpfs/file.c
+++ b/fs/hpfs/file.c
@@ -6,6 +6,7 @@
  *  file VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 #define BLOCKS(size) (((size) + 511) >> 9)
diff --git a/fs/hpfs/hpfs_fn.h b/fs/hpfs/hpfs_fn.h
index c2ea31bae313..701ca54c0867 100644
--- a/fs/hpfs/hpfs_fn.h
+++ b/fs/hpfs/hpfs_fn.h
@@ -13,7 +13,6 @@
 #include <linux/pagemap.h>
 #include <linux/buffer_head.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include "hpfs.h"
 
diff --git a/fs/hpfs/inode.c b/fs/hpfs/inode.c
index 39a1bfbea312..fe703ae46bc7 100644
--- a/fs/hpfs/inode.c
+++ b/fs/hpfs/inode.c
@@ -6,6 +6,7 @@
  *  inode VFS functions
  */
 
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 void hpfs_init_inode(struct inode *i)
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index b649232dde97..82b9c4ba9ed0 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -6,6 +6,7 @@
  *  adding & removing files & directories
  */
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include "hpfs_fn.h"
 
 static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 737f7246a4b5..f96f85092d1c 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -287,6 +287,7 @@ int journal_write_metadata_buffer(transaction_t *transaction,
         struct page *new_page;
         unsigned int new_offset;
         struct buffer_head *bh_in = jh2bh(jh_in);
+        journal_t *journal = transaction->t_journal;
 
         /*
          * The buffer really shouldn't be locked: only the current committing
@@ -300,6 +301,11 @@ int journal_write_metadata_buffer(transaction_t *transaction,
         J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
         new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+        /* keep subsequent assertions sane */
+        new_bh->b_state = 0;
+        init_buffer(new_bh, NULL, NULL);
+        atomic_set(&new_bh->b_count, 1);
+        new_jh = journal_add_journal_head(new_bh);      /* This sleeps */
 
         /*
          * If a new transaction has already done a buffer copy-out, then
@@ -361,14 +367,6 @@ repeat:
                 kunmap_atomic(mapped_data, KM_USER0);
         }
 
-        /* keep subsequent assertions sane */
-        new_bh->b_state = 0;
-        init_buffer(new_bh, NULL, NULL);
-        atomic_set(&new_bh->b_count, 1);
-        jbd_unlock_bh_state(bh_in);
-
-        new_jh = journal_add_journal_head(new_bh);      /* This sleeps */
-
         set_bh_page(new_bh, new_page, new_offset);
         new_jh->b_transaction = NULL;
         new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -385,7 +383,11 @@ repeat:
          * copying is moved to the transaction's shadow queue.
          */
         JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
-        journal_file_buffer(jh_in, transaction, BJ_Shadow);
+        spin_lock(&journal->j_list_lock);
+        __journal_file_buffer(jh_in, transaction, BJ_Shadow);
+        spin_unlock(&journal->j_list_lock);
+        jbd_unlock_bh_state(bh_in);
+
         JBUFFER_TRACE(new_jh, "file as BJ_IO");
         journal_file_buffer(new_jh, transaction, BJ_IO);
 
@@ -848,6 +850,12 @@ static int journal_reset(journal_t *journal)
 
         first = be32_to_cpu(sb->s_first);
         last = be32_to_cpu(sb->s_maxlen);
+        if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
+                printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+                       first, last);
+                journal_fail_superblock(journal);
+                return -EINVAL;
+        }
 
         journal->j_first = first;
         journal->j_last = last;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 73242ba7c7b1..c03ac11f74be 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -489,34 +489,15 @@ void journal_unlock_updates (journal_t *journal)
         wake_up(&journal->j_wait_transaction_locked);
 }
 
-/*
- * Report any unexpected dirty buffers which turn up.  Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible.  #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
 {
-        int jlist;
-
-        /* If this buffer is one which might reasonably be dirty
-         * --- ie. data, or not part of this journal --- then
-         * we're OK to leave it alone, but otherwise we need to
-         * move the dirty bit to the journal's own internal
-         * JBDDirty bit. */
-        jlist = jh->b_jlist;
+        char b[BDEVNAME_SIZE];
 
-        if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
-            jlist == BJ_Shadow || jlist == BJ_Forget) {
-                struct buffer_head *bh = jh2bh(jh);
-
-                if (test_clear_buffer_dirty(bh))
-                        set_buffer_jbddirty(bh);
-        }
+        printk(KERN_WARNING
+               "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+               "There's a risk of filesystem corruption in case of system "
+               "crash.\n",
+               bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
 }
 
 /*
@@ -583,14 +564,16 @@ repeat:
                         if (jh->b_next_transaction)
                                 J_ASSERT_JH(jh, jh->b_next_transaction ==
                                                         transaction);
+                        warn_dirty_buffer(bh);
                 }
                 /*
                  * In any case we need to clean the dirty flag and we must
                  * do it under the buffer lock to be sure we don't race
                  * with running write-out.
                  */
-                JBUFFER_TRACE(jh, "Unexpected dirty buffer");
-                jbd_unexpected_dirty_buffer(jh);
+                JBUFFER_TRACE(jh, "Journalling dirty buffer");
+                clear_buffer_dirty(bh);
+                set_buffer_jbddirty(bh);
         }
 
         unlock_buffer(bh);
@@ -826,6 +809,15 @@ int journal_get_create_access(handle_t *handle, struct buffer_head *bh)
         J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
         if (jh->b_transaction == NULL) {
+                /*
+                 * Previous journal_forget() could have left the buffer
+                 * with jbddirty bit set because it was being committed. When
+                 * the commit finished, we've filed the buffer for
+                 * checkpointing and marked it dirty. Now we are reallocating
+                 * the buffer so the transaction freeing it must have
+                 * committed and so it's safe to clear the dirty bit.
+                 */
+                clear_buffer_dirty(jh2bh(jh));
                 jh->b_transaction = transaction;
 
                 /* first access by this transaction */
@@ -1782,8 +1774,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
 
         if (jh->b_cp_transaction) {
                 JBUFFER_TRACE(jh, "on running+cp transaction");
+                /*
+                 * We don't want to write the buffer anymore, clear the
+                 * bit so that we don't confuse checks in
+                 * __journal_file_buffer
+                 */
+                clear_buffer_dirty(bh);
                 __journal_file_buffer(jh, transaction, BJ_Forget);
-                clear_buffer_jbddirty(bh);
                 may_free = 0;
         } else {
                 JBUFFER_TRACE(jh, "on running transaction");
@@ -2041,12 +2038,17 @@ void __journal_file_buffer(struct journal_head *jh,
         if (jh->b_transaction && jh->b_jlist == jlist)
                 return;
 
-        /* The following list of buffer states needs to be consistent
-         * with __jbd_unexpected_dirty_buffer()'s handling of dirty
-         * state. */
-
         if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
             jlist == BJ_Shadow || jlist == BJ_Forget) {
+                /*
+                 * For metadata buffers, we track dirty bit in buffer_jbddirty
+                 * instead of buffer_dirty. We should not see a dirty bit set
+                 * here because we clear it in do_get_write_access but e.g.
+                 * tune2fs can modify the sb and set the dirty bit at any time
+                 * so we try to gracefully handle that.
+                 */
+                if (buffer_dirty(bh))
+                        warn_dirty_buffer(bh);
                 if (test_clear_buffer_dirty(bh) ||
                     test_clear_buffer_jbddirty(bh))
                         was_dirty = 1;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 18bfd5dab642..e378cb383979 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -297,6 +297,7 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
         unsigned int new_offset;
         struct buffer_head *bh_in = jh2bh(jh_in);
         struct jbd2_buffer_trigger_type *triggers;
+        journal_t *journal = transaction->t_journal;
 
         /*
          * The buffer really shouldn't be locked: only the current committing
@@ -310,6 +311,11 @@ int jbd2_journal_write_metadata_buffer(transaction_t *transaction,
         J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
         new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+        /* keep subsequent assertions sane */
+        new_bh->b_state = 0;
+        init_buffer(new_bh, NULL, NULL);
+        atomic_set(&new_bh->b_count, 1);
+        new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
 
         /*
          * If a new transaction has already done a buffer copy-out, then
@@ -388,14 +394,6 @@ repeat:
                 kunmap_atomic(mapped_data, KM_USER0);
         }
 
-        /* keep subsequent assertions sane */
-        new_bh->b_state = 0;
-        init_buffer(new_bh, NULL, NULL);
-        atomic_set(&new_bh->b_count, 1);
-        jbd_unlock_bh_state(bh_in);
-
-        new_jh = jbd2_journal_add_journal_head(new_bh); /* This sleeps */
-
         set_bh_page(new_bh, new_page, new_offset);
         new_jh->b_transaction = NULL;
         new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -412,7 +410,11 @@ repeat:
          * copying is moved to the transaction's shadow queue.
          */
         JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
-        jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+        spin_lock(&journal->j_list_lock);
+        __jbd2_journal_file_buffer(jh_in, transaction, BJ_Shadow);
+        spin_unlock(&journal->j_list_lock);
+        jbd_unlock_bh_state(bh_in);
+
         JBUFFER_TRACE(new_jh, "file as BJ_IO");
         jbd2_journal_file_buffer(new_jh, transaction, BJ_IO);
 
@@ -2410,6 +2412,7 @@ const char *jbd2_dev_to_name(dev_t device)
         int     i = hash_32(device, CACHE_SIZE_BITS);
         char    *ret;
         struct block_device *bd;
+        static struct devname_cache *new_dev;
 
         rcu_read_lock();
         if (devcache[i] && devcache[i]->device == device) {
@@ -2419,20 +2422,20 @@ const char *jbd2_dev_to_name(dev_t device)
         }
         rcu_read_unlock();
 
+        new_dev = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
+        if (!new_dev)
+                return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
         spin_lock(&devname_cache_lock);
         if (devcache[i]) {
                 if (devcache[i]->device == device) {
+                        kfree(new_dev);
                         ret = devcache[i]->devname;
                         spin_unlock(&devname_cache_lock);
                         return ret;
                 }
                 call_rcu(&devcache[i]->rcu, free_devcache);
         }
-        devcache[i] = kmalloc(sizeof(struct devname_cache), GFP_KERNEL);
-        if (!devcache[i]) {
-                spin_unlock(&devname_cache_lock);
-                return "NODEV-ALLOCFAILURE"; /* Something non-NULL */
-        }
+        devcache[i] = new_dev;
         devcache[i]->device = device;
         bd = bdget(device);
         if (bd) {
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 494501edba6b..6213ac728f30 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -499,34 +499,15 @@ void jbd2_journal_unlock_updates (journal_t *journal)
         wake_up(&journal->j_wait_transaction_locked);
 }
 
-/*
- * Report any unexpected dirty buffers which turn up.  Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible.  #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
 {
-        int jlist;
-
-        /* If this buffer is one which might reasonably be dirty
-         * --- ie. data, or not part of this journal --- then
-         * we're OK to leave it alone, but otherwise we need to
-         * move the dirty bit to the journal's own internal
-         * JBDDirty bit. */
-        jlist = jh->b_jlist;
+        char b[BDEVNAME_SIZE];
 
-        if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
-            jlist == BJ_Shadow || jlist == BJ_Forget) {
-                struct buffer_head *bh = jh2bh(jh);
-
-                if (test_clear_buffer_dirty(bh))
-                        set_buffer_jbddirty(bh);
-        }
+        printk(KERN_WARNING
+               "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+               "There's a risk of filesystem corruption in case of system "
+               "crash.\n",
+               bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
 }
 
 /*
@@ -593,14 +574,16 @@ repeat:
                         if (jh->b_next_transaction)
                                 J_ASSERT_JH(jh, jh->b_next_transaction ==
                                                         transaction);
+                        warn_dirty_buffer(bh);
                 }
                 /*
                  * In any case we need to clean the dirty flag and we must
                  * do it under the buffer lock to be sure we don't race
                  * with running write-out.
                  */
-                JBUFFER_TRACE(jh, "Unexpected dirty buffer");
-                jbd_unexpected_dirty_buffer(jh);
+                JBUFFER_TRACE(jh, "Journalling dirty buffer");
+                clear_buffer_dirty(bh);
+                set_buffer_jbddirty(bh);
         }
 
         unlock_buffer(bh);
@@ -843,6 +826,15 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh)
         J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
         if (jh->b_transaction == NULL) {
+                /*
+                 * Previous jbd2_journal_forget() could have left the buffer
+                 * with jbddirty bit set because it was being committed. When
+                 * the commit finished, we've filed the buffer for
+                 * checkpointing and marked it dirty. Now we are reallocating
+                 * the buffer so the transaction freeing it must have
+                 * committed and so it's safe to clear the dirty bit.
+                 */
+                clear_buffer_dirty(jh2bh(jh));
                 jh->b_transaction = transaction;
 
                 /* first access by this transaction */
@@ -1644,8 +1636,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
 
         if (jh->b_cp_transaction) {
                 JBUFFER_TRACE(jh, "on running+cp transaction");
+                /*
+                 * We don't want to write the buffer anymore, clear the
+                 * bit so that we don't confuse checks in
+                 * __journal_file_buffer
+                 */
+                clear_buffer_dirty(bh);
                 __jbd2_journal_file_buffer(jh, transaction, BJ_Forget);
-                clear_buffer_jbddirty(bh);
                 may_free = 0;
         } else {
                 JBUFFER_TRACE(jh, "on running transaction");
@@ -1896,12 +1893,17 @@ void __jbd2_journal_file_buffer(struct journal_head *jh,
         if (jh->b_transaction && jh->b_jlist == jlist)
                 return;
 
-        /* The following list of buffer states needs to be consistent
-         * with __jbd_unexpected_dirty_buffer()'s handling of dirty
-         * state. */
-
         if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
             jlist == BJ_Shadow || jlist == BJ_Forget) {
+                /*
+                 * For metadata buffers, we track dirty bit in buffer_jbddirty
+                 * instead of buffer_dirty. We should not see a dirty bit set
+                 * here because we clear it in do_get_write_access but e.g.
+                 * tune2fs can modify the sb and set the dirty bit at any time
+                 * so we try to gracefully handle that.
+                 */
+                if (buffer_dirty(bh))
+                        warn_dirty_buffer(bh);
                 if (test_clear_buffer_dirty(bh) ||
                     test_clear_buffer_jbddirty(bh))
                         was_dirty = 1;
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index 07a22caf2687..0035c021395a 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/fs.h>
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 91fa3ad6e8c2..a29c7c3e3fb8 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -67,10 +67,8 @@ static struct posix_acl *jfs_get_acl(struct inode *inode, int type)
                 acl = posix_acl_from_xattr(value, size);
         }
         kfree(value);
-        if (!IS_ERR(acl)) {
+        if (!IS_ERR(acl))
                 set_cached_acl(inode, type, acl);
-                posix_acl_release(acl);
-        }
         return acl;
 }
 
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index f2fdcbce143e..4336adba952a 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index 1725037374c5..bd173a6ca3b1 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/in.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/clnt.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index 3688e55901fc..e1d28ddd2169 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/in.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/clnt.h>
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index c2d061675d80..8d25ccb2d51d 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -1242,20 +1242,6 @@ error:
         return error;
 }
 
-/*
- * Initialize a session.
- * Note: save the mount rsize and wsize for create_server negotiation.
- */
-static void nfs4_init_session(struct nfs_client *clp,
-                              unsigned int wsize, unsigned int rsize)
-{
-#if defined(CONFIG_NFS_V4_1)
-        if (nfs4_has_session(clp)) {
-                clp->cl_session->fc_attrs.max_rqst_sz = wsize;
-                clp->cl_session->fc_attrs.max_resp_sz = rsize;
-        }
-#endif /* CONFIG_NFS_V4_1 */
-}
 
 /*
  * Session has been established, and the client marked ready.
@@ -1350,7 +1336,9 @@ struct nfs_server *nfs4_create_server(const struct nfs_parsed_mount_data *data,
         BUG_ON(!server->nfs_client->rpc_ops);
         BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops);
 
-        nfs4_init_session(server->nfs_client, server->wsize, server->rsize);
+        error = nfs4_init_session(server);
+        if (error < 0)
+                goto error;
 
         /* Probe the root fh to retrieve its FSID */
         error = nfs4_path_walk(server, mntfh, data->nfs_server.export_path);
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index af05b918cb5b..6dd48a4405b4 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -10,6 +10,7 @@
 #include <linux/kthread.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 
 #include <linux/nfs4.h>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 89f98e9a024b..32062c33c859 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -29,7 +29,6 @@
 #include <linux/nfs_fs.h>
 #include <linux/nfs_mount.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/pagevec.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
@@ -1026,12 +1025,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
                                 res = NULL;
                                 goto out;
                         /* This turned out not to be a regular file */
-                        case -EISDIR:
                         case -ENOTDIR:
                                 goto no_open;
                         case -ELOOP:
                                 if (!(nd->intent.open.flags & O_NOFOLLOW))
                                         goto no_open;
+                        /* case -EISDIR: */
                         /* case -EINVAL: */
                         default:
                                 goto out;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 0055b813ec2c..05062329b678 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -26,7 +26,6 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/aio.h>
 
 #include <asm/uaccess.h>
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 64f87194d390..bd7938eda6a8 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -30,7 +30,6 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs4_mount.h>
 #include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/nfs_idmap.h>
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 61bc3a32e1e2..6ea07a3c75d4 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -220,6 +220,7 @@ extern void nfs4_destroy_session(struct nfs4_session *session);
 extern struct nfs4_session *nfs4_alloc_session(struct nfs_client *clp);
 extern int nfs4_proc_create_session(struct nfs_client *, int reset);
 extern int nfs4_proc_destroy_session(struct nfs4_session *);
+extern int nfs4_init_session(struct nfs_server *server);
 #else /* CONFIG_NFS_v4_1 */
 static inline int nfs4_setup_sequence(struct nfs_client *clp,
                 struct nfs4_sequence_args *args, struct nfs4_sequence_res *res,
@@ -227,6 +228,11 @@ static inline int nfs4_setup_sequence(struct nfs_client *clp,
 {
         return 0;
 }
+
+static inline int nfs4_init_session(struct nfs_server *server)
+{
+        return 0;
+}
 #endif /* CONFIG_NFS_V4_1 */
 
 extern struct nfs4_state_maintenance_ops *nfs4_state_renewal_ops[];
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 92ce43517814..6917311f201c 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -45,7 +45,6 @@
 #include <linux/nfs4.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
 #include <linux/namei.h>
 #include <linux/mount.h>
 #include <linux/module.h>
@@ -2041,15 +2040,9 @@ static int _nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
                 .rpc_argp = &args,
                 .rpc_resp = &res,
         };
-        int status;
 
         nfs_fattr_init(info->fattr);
-        status = nfs4_recover_expired_lease(server);
-        if (!status)
-                status = nfs4_check_client_ready(server->nfs_client);
-        if (!status)
-                status = nfs4_call_sync(server, &msg, &args, &res, 0);
-        return status;
+        return nfs4_call_sync(server, &msg, &args, &res, 0);
 }
 
 static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle,
@@ -4100,15 +4093,23 @@ nfs4_proc_lock(struct file *filp, int cmd, struct file_lock *request)
         if (request->fl_start < 0 || request->fl_end < 0)
                 return -EINVAL;
 
-        if (IS_GETLK(cmd))
-                return nfs4_proc_getlk(state, F_GETLK, request);
+        if (IS_GETLK(cmd)) {
+                if (state != NULL)
+                        return nfs4_proc_getlk(state, F_GETLK, request);
+                return 0;
+        }
 
         if (!(IS_SETLK(cmd) || IS_SETLKW(cmd)))
                 return -EINVAL;
 
-        if (request->fl_type == F_UNLCK)
-                return nfs4_proc_unlck(state, cmd, request);
+        if (request->fl_type == F_UNLCK) {
+                if (state != NULL)
+                        return nfs4_proc_unlck(state, cmd, request);
+                return 0;
+        }
 
+        if (state == NULL)
+                return -ENOLCK;
         do {
                 status = nfs4_proc_setlk(state, cmd, request);
                 if ((status != -EAGAIN) || IS_SETLK(cmd))
@@ -4794,6 +4795,22 @@ int nfs4_proc_destroy_session(struct nfs4_session *session)
         return status;
 }
 
+int nfs4_init_session(struct nfs_server *server)
+{
+        struct nfs_client *clp = server->nfs_client;
+        int ret;
+
+        if (!nfs4_has_session(clp))
+                return 0;
+
+        clp->cl_session->fc_attrs.max_rqst_sz = server->wsize;
+        clp->cl_session->fc_attrs.max_resp_sz = server->rsize;
+        ret = nfs4_recover_expired_lease(server);
+        if (!ret)
+                ret = nfs4_check_client_ready(clp);
+        return ret;
+}
+
 /*
  * Renew the cl_session lease.
  */
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index b73c5a728655..65ca8c18476f 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -553,6 +553,7 @@ static struct nfs4_lock_state *nfs4_alloc_lock_state(struct nfs4_state *state, f
         INIT_LIST_HEAD(&lsp->ls_sequence.list);
         lsp->ls_seqid.sequence = &lsp->ls_sequence;
         atomic_set(&lsp->ls_count, 1);
+        lsp->ls_state = state;
         lsp->ls_owner = fl_owner;
         spin_lock(&clp->cl_lock);
         nfs_alloc_unique_id(&clp->cl_lockowner_id, &lsp->ls_id, 1, 64);
@@ -587,7 +588,6 @@ static struct nfs4_lock_state *nfs4_get_lock_state(struct nfs4_state *state, fl_
                 if (lsp != NULL)
                         break;
                 if (new != NULL) {
-                        new->ls_state = state;
                         list_add(&new->ls_locks, &state->lock_states);
                         set_bit(LK_STATE_IN_USE, &state->flags);
                         lsp = new;
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 96c4ebfa46f4..73ea5e8d66ce 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -18,7 +18,6 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/nfs_fs.h>
 #include <linux/nfs_page.h>
-#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 35d81316163f..0a0a2ff767c3 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -19,7 +19,6 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs_page.h>
 #include <linux/backing-dev.h>
-#include <linux/blkdev.h>
 
 #include <asm/uaccess.h>
 
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 1250fb978ac1..6d0847562d87 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/inet.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/ctype.h>
 
 #include <linux/nfs.h>
diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c
index d4c9884cd54b..492c79b7800b 100644
--- a/fs/nfsd/nfssvc.c
+++ b/fs/nfsd/nfssvc.c
@@ -18,7 +18,6 @@
 #include <linux/unistd.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/freezer.h>
 #include <linux/fs_struct.h>
 #include <linux/kthread.h>
diff --git a/fs/nilfs2/Kconfig b/fs/nilfs2/Kconfig
new file mode 100644
index 000000000000..72da095d4009
--- /dev/null
+++ b/fs/nilfs2/Kconfig
@@ -0,0 +1,25 @@
+config NILFS2_FS
+        tristate "NILFS2 file system support (EXPERIMENTAL)"
+        depends on BLOCK && EXPERIMENTAL
+        select CRC32
+        help
+          NILFS2 is a log-structured file system (LFS) supporting continuous
+          snapshotting.  In addition to versioning capability of the entire
+          file system, users can even restore files mistakenly overwritten or
+          destroyed just a few seconds ago.  Since this file system can keep
+          consistency like conventional LFS, it achieves quick recovery after
+          system crashes.
+
+          NILFS2 creates a number of checkpoints every few seconds or per
+          synchronous write basis (unless there is no change).  Users can
+          select significant versions among continuously created checkpoints,
+          and can change them into snapshots which will be preserved for long
+          periods until they are changed back to checkpoints.  Each
+          snapshot is mountable as a read-only file system concurrently with
+          its writable mount, and this feature is convenient for online backup.
+
+          Some features including atime, extended attributes, and POSIX ACLs,
+          are not supported yet.
+
+          To compile this file system support as a module, choose M here: the
+          module will be called nilfs2.  If unsure, say N.
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 54100acc1102..1a4fa04cf071 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -43,7 +43,6 @@
  */
 
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include "nilfs.h"
 #include "page.h"
 
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 31dac7e3b0f1..dffbb0911d02 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,15 +1,5 @@
 config FSNOTIFY
-        bool "Filesystem notification backend"
-        default y
-        ---help---
-           fsnotify is a backend for filesystem notification.  fsnotify does
-           not provide any userspace interface but does provide the basis
-           needed for other notification schemes such as dnotify, inotify,
-           and fanotify.
-
-           Say Y here to enable fsnotify suport.
-
-           If unsure, say Y.
+        def_bool n
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 904ff8d5405a..f9c1ca139d8f 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,6 +1,6 @@
 config DNOTIFY
         bool "Dnotify support"
-        depends on FSNOTIFY
+        select FSNOTIFY
         default y
         help
           Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index ec2f7bd76818..037e878e03fc 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -159,7 +159,9 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
                         if (!group->ops->should_send_event(group, to_tell, mask))
                                 continue;
                         if (!event) {
-                                event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+                                event = fsnotify_create_event(to_tell, mask, data,
+                                                              data_is, file_name, cookie,
+                                                              GFP_KERNEL);
                                 /* shit, we OOM'd and now we can't tell, maybe
                                  * someday someone else will want to do something
                                  * here */
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 5356884289a1..3e56dbffe729 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -15,7 +15,7 @@ config INOTIFY
 
 config INOTIFY_USER
         bool "Inotify support for userspace"
-        depends on FSNOTIFY
+        select FSNOTIFY
         default y
         ---help---
           Say Y here to enable inotify support for userspace, including the
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff27a2965844..f30d9bbc2e1b 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -57,7 +57,6 @@ int inotify_max_user_watches __read_mostly;
 
 static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
 struct kmem_cache *event_priv_cachep __read_mostly;
-static struct fsnotify_event *inotify_ignored_event;
 
 /*
  * When inotify registers a new group it increments this and uses that
@@ -365,6 +364,17 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
         return error;
 }
 
+static void inotify_remove_from_idr(struct fsnotify_group *group,
+                                    struct inotify_inode_mark_entry *ientry)
+{
+        struct idr *idr;
+
+        spin_lock(&group->inotify_data.idr_lock);
+        idr = &group->inotify_data.idr;
+        idr_remove(idr, ientry->wd);
+        spin_unlock(&group->inotify_data.idr_lock);
+        ientry->wd = -1;
+}
 /*
  * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
  * internal reference help on the mark because it is in the idr.
@@ -373,13 +383,19 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
                                     struct fsnotify_group *group)
 {
         struct inotify_inode_mark_entry *ientry;
+        struct fsnotify_event *ignored_event;
         struct inotify_event_private_data *event_priv;
         struct fsnotify_event_private_data *fsn_event_priv;
-        struct idr *idr;
+
+        ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
+                                              FSNOTIFY_EVENT_NONE, NULL, 0,
+                                              GFP_NOFS);
+        if (!ignored_event)
+                return;
 
         ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
-        event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+        event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
         if (unlikely(!event_priv))
                 goto skip_send_ignore;
 
@@ -388,7 +404,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
         fsn_event_priv->group = group;
         event_priv->wd = ientry->wd;
 
-        fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
+        fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
 
         /* did the private data get added? */
         if (list_empty(&fsn_event_priv->event_list))
@@ -396,14 +412,16 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 
 skip_send_ignore:
 
+        /* matches the reference taken when the event was created */
+        fsnotify_put_event(ignored_event);
+
         /* remove this entry from the idr */
-        spin_lock(&group->inotify_data.idr_lock);
-        idr = &group->inotify_data.idr;
-        idr_remove(idr, ientry->wd);
-        spin_unlock(&group->inotify_data.idr_lock);
+        inotify_remove_from_idr(group, ientry);
 
         /* removed from idr, drop that reference */
         fsnotify_put_mark(entry);
+
+        atomic_dec(&group->inotify_data.user->inotify_watches);
 }
 
 /* ding dong the mark is dead */
@@ -418,6 +436,7 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod
 {
         struct fsnotify_mark_entry *entry = NULL;
         struct inotify_inode_mark_entry *ientry;
+        struct inotify_inode_mark_entry *tmp_ientry;
         int ret = 0;
         int add = (arg & IN_MASK_ADD);
         __u32 mask;
@@ -428,54 +447,66 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod
         if (unlikely(!mask))
                 return -EINVAL;
 
-        ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
-        if (unlikely(!ientry))
+        tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+        if (unlikely(!tmp_ientry))
                 return -ENOMEM;
         /* we set the mask at the end after attaching it */
-        fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
-        ientry->wd = 0;
+        fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+        tmp_ientry->wd = -1;
 
 find_entry:
         spin_lock(&inode->i_lock);
         entry = fsnotify_find_mark_entry(group, inode);
         spin_unlock(&inode->i_lock);
         if (entry) {
-                kmem_cache_free(inotify_inode_mark_cachep, ientry);
                 ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
         } else {
-                if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
-                        ret = -ENOSPC;
-                        goto out_err;
-                }
-
-                ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
-                if (ret == -EEXIST)
-                        goto find_entry;
-                else if (ret)
+                ret = -ENOSPC;
+                if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
                         goto out_err;
-
-                entry = &ientry->fsn_entry;
 retry:
                 ret = -ENOMEM;
                 if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
                         goto out_err;
 
                 spin_lock(&group->inotify_data.idr_lock);
-                /* if entry is added to the idr we keep the reference obtained
-                 * through fsnotify_mark_add.  remember to drop this reference
-                 * when entry is removed from idr */
-                ret = idr_get_new_above(&group->inotify_data.idr, entry,
-                                        ++group->inotify_data.last_wd,
-                                        &ientry->wd);
+                ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+                                        group->inotify_data.last_wd,
+                                        &tmp_ientry->wd);
                 spin_unlock(&group->inotify_data.idr_lock);
                 if (ret) {
                         if (ret == -EAGAIN)
                                 goto retry;
                         goto out_err;
                 }
+
+                ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+                if (ret) {
+                        inotify_remove_from_idr(group, tmp_ientry);
+                        if (ret == -EEXIST)
+                                goto find_entry;
+                        goto out_err;
+                }
+
+                /* tmp_ientry has been added to the inode, so we are all set up.
+                 * now we just need to make sure tmp_ientry doesn't get freed and
+                 * we need to set up entry and ientry so the generic code can
+                 * do its thing. */
+                ientry = tmp_ientry;
+                entry = &ientry->fsn_entry;
+                tmp_ientry = NULL;
+
                 atomic_inc(&group->inotify_data.user->inotify_watches);
+
+                /* update the idr hint */
+                group->inotify_data.last_wd = ientry->wd;
+
+                /* we put the mark on the idr, take a reference */
+                fsnotify_get_mark(entry);
         }
 
+        ret = ientry->wd;
+
         spin_lock(&entry->lock);
 
         old_mask = entry->mask;
@@ -506,14 +537,19 @@ retry:
                         fsnotify_recalc_group_mask(group);
         }
 
-        return ientry->wd;
+        /* this either matches fsnotify_find_mark_entry, or init_mark_entry
+         * depending on which path we took... */
+        fsnotify_put_mark(entry);
 
 out_err:
-        /* see this isn't supposed to happen, just kill the watch */
-        if (entry) {
-                fsnotify_destroy_mark_by_entry(entry);
-                fsnotify_put_mark(entry);
+        /* could be an error, could be that we found an existing mark */
+        if (tmp_ientry) {
+                /* on the idr but didn't make it on the inode */
+                if (tmp_ientry->wd != -1)
+                        inotify_remove_from_idr(group, tmp_ientry);
+                kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
         }
+
         return ret;
 }
 
@@ -721,9 +757,6 @@ static int __init inotify_user_setup(void)
 
         inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
         event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
-        inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
-        if (!inotify_ignored_event)
-                panic("unable to allocate the inotify ignored event\n");
 
         inotify_max_queued_events = 16384;
         inotify_max_user_instances = 128;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 959b73e756fd..521368574e97 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -136,18 +136,24 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
 {
         if ((old->mask == new->mask) &&
             (old->to_tell == new->to_tell) &&
-            (old->data_type == new->data_type)) {
+            (old->data_type == new->data_type) &&
+            (old->name_len == new->name_len)) {
                 switch (old->data_type) {
                 case (FSNOTIFY_EVENT_INODE):
-                        if (old->inode == new->inode)
+                        /* remember, after old was put on the wait_q we aren't
+                         * allowed to look at the inode any more, only thing
+                         * left to check was if the file_name is the same */
+                        if (old->name_len &&
+                            !strcmp(old->file_name, new->file_name))
                                 return true;
                         break;
                 case (FSNOTIFY_EVENT_PATH):
                         if ((old->path.mnt == new->path.mnt) &&
                             (old->path.dentry == new->path.dentry))
                                 return true;
+                        break;
                 case (FSNOTIFY_EVENT_NONE):
-                        return true;
+                        return false;
                 };
         }
         return false;
@@ -339,18 +345,19 @@ static void initialize_event(struct fsnotify_event *event)
  * @name the filename, if available
  */
 struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
-                                             int data_type, const char *name, u32 cookie)
+                                             int data_type, const char *name, u32 cookie,
+                                             gfp_t gfp)
 {
         struct fsnotify_event *event;
 
-        event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+        event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
         if (!event)
                 return NULL;
 
         initialize_event(event);
 
         if (name) {
-                event->file_name = kstrdup(name, GFP_KERNEL);
+                event->file_name = kstrdup(name, gfp);
                 if (!event->file_name) {
                         kmem_cache_free(fsnotify_event_cachep, event);
                         return NULL;
diff --git a/fs/ocfs2/ioctl.c b/fs/ocfs2/ioctl.c
index 9fcd36dcc9a0..467b413bec21 100644
--- a/fs/ocfs2/ioctl.c
+++ b/fs/ocfs2/ioctl.c
@@ -7,7 +7,6 @@
 
 #include <linux/fs.h>
 #include <linux/mount.h>
-#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_INODE
 #include <cluster/masklog.h>
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 1a9c7878f864..ea4e6cb29e13 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -436,7 +436,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno,
         rcu_assign_pointer(ptbl->part[partno], p);
 
         /* suppress uevent if the disk supresses it */
-        if (!dev_get_uevent_suppress(pdev))
+        if (!dev_get_uevent_suppress(ddev))
                 kobject_uevent(&pdev->kobj, KOBJ_ADD);
 
         return p;
diff --git a/fs/pipe.c b/fs/pipe.c
index f7dd21ad85a6..52c415114838 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -68,8 +68,8 @@ void pipe_double_lock(struct pipe_inode_info *pipe1,
                 pipe_lock_nested(pipe1, I_MUTEX_PARENT);
                 pipe_lock_nested(pipe2, I_MUTEX_CHILD);
         } else {
-                pipe_lock_nested(pipe2, I_MUTEX_CHILD);
-                pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+                pipe_lock_nested(pipe2, I_MUTEX_PARENT);
+                pipe_lock_nested(pipe1, I_MUTEX_CHILD);
         }
 }
 
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 70f36c043d62..38f7bd559f35 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2043,7 +2043,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
                 invalidate_bdev(sb->s_bdev);
         }
         mutex_lock(&dqopt->dqonoff_mutex);
-        mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
         if (sb_has_quota_loaded(sb, type)) {
                 error = -EBUSY;
                 goto out_lock;
@@ -2054,9 +2053,11 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
                  * possible) Also nobody should write to the file - we use
                  * special IO operations which ignore the immutable bit. */
                 down_write(&dqopt->dqptr_sem);
+                mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
                 oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE |
                                              S_NOQUOTA);
                 inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE;
+                mutex_unlock(&inode->i_mutex);
                 up_write(&dqopt->dqptr_sem);
                 sb->dq_op->drop(inode);
         }
@@ -2080,7 +2081,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
                 goto out_file_init;
         }
         mutex_unlock(&dqopt->dqio_mutex);
-        mutex_unlock(&inode->i_mutex);
         spin_lock(&dq_state_lock);
         dqopt->flags |= dquot_state_flag(flags, type);
         spin_unlock(&dq_state_lock);
@@ -2096,13 +2096,14 @@ out_file_init:
 out_lock:
         if (oldflags != -1) {
                 down_write(&dqopt->dqptr_sem);
+                mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
                 /* Set the flags back (in the case of accidental quotaon()
                  * on a wrong file we don't want to mess up the flags) */
                 inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE);
                 inode->i_flags |= oldflags;
+                mutex_unlock(&inode->i_mutex);
                 up_write(&dqopt->dqptr_sem);
         }
-        mutex_unlock(&inode->i_mutex);
         mutex_unlock(&dqopt->dqonoff_mutex);
 out_fmt:
         put_quota_format(fmt);
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index ebb2c417912c..11f0c06316de 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -20,6 +20,7 @@
 #include <linux/ramfs.h>
 #include <linux/pagevec.h>
 #include <linux/mman.h>
+#include <linux/sched.h>
 
 #include <asm/uaccess.h>
 #include "internal.h"
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f3d47d856848..6925b835a43b 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -46,7 +46,6 @@
 #include <linux/reiserfs_acl.h>
 #include <asm/uaccess.h>
 #include <net/checksum.h>
-#include <linux/smp_lock.h>
 #include <linux/stat.h>
 #include <linux/quotaops.h>
 
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 3b52770f46ff..cb5fc57e370b 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -30,6 +30,7 @@
 #include <linux/fs.h>
 #include <linux/vfs.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/pagemap.h>
 #include <linux/init.h>
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index d88d0fac9fa5..14f2d71ea3ce 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -939,8 +939,10 @@ again:
         /* Remove from old parent's list and insert into new parent's list. */
         sysfs_unlink_sibling(sd);
         sysfs_get(new_parent_sd);
+        drop_nlink(old_parent->d_inode);
         sysfs_put(sd->s_parent);
         sd->s_parent = new_parent_sd;
+        inc_nlink(new_parent->d_inode);
         sysfs_link_sibling(sd);
 
  out_unlock:
diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c
index 6db7a6be6c97..8aacd64957a2 100644
--- a/fs/ubifs/ioctl.c
+++ b/fs/ubifs/ioctl.c
@@ -25,7 +25,6 @@
 /* This file implements EXT2-compatible extended attribute ioctl() calls */
 
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/mount.h>
 #include "ubifs.h"
 
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 6832135159b6..9d1b8c2e6c45 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1087,11 +1087,23 @@ static int udf_load_vat(struct super_block *sb, int p_index, int type1_index)
         struct udf_inode_info *vati;
         uint32_t pos;
         struct virtualAllocationTable20 *vat20;
+        sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
 
         /* VAT file entry is in the last recorded block */
         ino.partitionReferenceNum = type1_index;
         ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root;
         sbi->s_vat_inode = udf_iget(sb, &ino);
+        if (!sbi->s_vat_inode &&
+            sbi->s_last_block != blocks - 1) {
+                printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
+                       " last recorded block (%lu), retrying with the last "
+                       "block of the device (%lu).\n",
+                       (unsigned long)sbi->s_last_block,
+                       (unsigned long)blocks - 1);
+                ino.partitionReferenceNum = type1_index;
+                ino.logicalBlockNum = blocks - 1 - map->s_partition_root;
+                sbi->s_vat_inode = udf_iget(sb, &ino);
+        }
         if (!sbi->s_vat_inode)
                 return 1;
 
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7ec89fc05b2b..aecf2519db76 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1268,6 +1268,14 @@ xfs_vm_writepage(
         if (!page_has_buffers(page))
                 create_empty_buffers(page, 1 << inode->i_blkbits, 0);
 
+
+        /*
+         *  VM calculation for nr_to_write seems off.  Bump it way
+         *  up, this gets simple streaming writes zippy again.
+         *  To be reviewed again after Jens' writeback changes.
+         */
+        wbc->nr_to_write *= 4;
+
         /*
          * Convert delayed allocate, unwritten or unmapped space
          * to real space and flush out to disk.
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index f4e255441574..0542fd507649 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -41,7 +41,6 @@
 #include "xfs_ioctl.h"
 
 #include <linux/dcache.h>
-#include <linux/smp_lock.h>
 
 static struct vm_operations_struct xfs_file_vm_ops;
 
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 58973bb46038..8070b34cc287 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -680,8 +680,8 @@ xfs_vn_fiemap(
         else
                 bm.bmv_length = BTOBB(length);
 
-        /* our formatter will tell xfs_getbmap when to stop. */
-        bm.bmv_count = MAXEXTNUM;
+        /* We add one because in getbmap world count includes the header */
+        bm.bmv_count = fieinfo->fi_extents_max + 1;
         bm.bmv_iflags = BMV_IF_PREALLOC;
         if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR)
                 bm.bmv_iflags |= BMV_IF_ATTRFORK;
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 9d40e879f99e..77ff547730af 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -27,9 +27,9 @@
 #define pud_page_vaddr(pud)             pgd_page_vaddr(pud)
 
 #undef pud_free_tlb
-#define pud_free_tlb(tlb, x)            do { } while (0)
+#define pud_free_tlb(tlb, x, addr)      do { } while (0)
 #define pud_free(mm, x)                 do { } while (0)
-#define __pud_free_tlb(tlb, x)          do { } while (0)
+#define __pud_free_tlb(tlb, x, addr)    do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)         (end)
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index a7cdc48e8b78..725612b793ce 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -59,7 +59,7 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
 }
-#define __pmd_free_tlb(tlb, x)                  do { } while (0)
+#define __pmd_free_tlb(tlb, x, a)               do { } while (0)
 
 #undef  pmd_addr_end
 #define pmd_addr_end(addr, end)                 (end)
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index 87cf449a6df3..810431d8351b 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -52,7 +52,7 @@ static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)              NULL
 #define pud_free(mm, x)                         do { } while (0)
-#define __pud_free_tlb(tlb, x)                  do { } while (0)
+#define __pud_free_tlb(tlb, x, a)               do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)                 (end)
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index f490e43a90b9..e43f9766259f 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -123,24 +123,24 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
                 __tlb_remove_tlb_entry(tlb, ptep, address);     \
         } while (0)
 
-#define pte_free_tlb(tlb, ptep)                                 \
+#define pte_free_tlb(tlb, ptep, address)                        \
         do {                                                    \
                 tlb->need_flush = 1;                            \
-                __pte_free_tlb(tlb, ptep);                      \
+                __pte_free_tlb(tlb, ptep, address);             \
         } while (0)
 
 #ifndef __ARCH_HAS_4LEVEL_HACK
-#define pud_free_tlb(tlb, pudp)                                 \
+#define pud_free_tlb(tlb, pudp, address)                        \
         do {                                                    \
                 tlb->need_flush = 1;                            \
-                __pud_free_tlb(tlb, pudp);                      \
+                __pud_free_tlb(tlb, pudp, address);             \
         } while (0)
 #endif
 
-#define pmd_free_tlb(tlb, pmdp)                                 \
+#define pmd_free_tlb(tlb, pmdp, address)                        \
         do {                                                    \
                 tlb->need_flush = 1;                            \
-                __pmd_free_tlb(tlb, pmdp);                      \
+                __pmd_free_tlb(tlb, pmdp, address);             \
         } while (0)
 
 #define tlb_migrate_finish(mm) do {} while (0)
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index a553f1041cf1..6ad76bf5fb40 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -30,9 +30,7 @@
  *      EXCEPTION_TABLE(...)
  *      NOTES
  *
- *      __bss_start = .;
- *      BSS_SECTION(0, 0)
- *      __bss_stop = .;
+ *      BSS_SECTION(0, 0, 0)
  *      _end = .;
  *
  *      /DISCARD/ : {
@@ -489,7 +487,8 @@
  * bss (Block Started by Symbol) - uninitialized data
  * zeroed during startup
  */
-#define SBSS                                                            \
+#define SBSS(sbss_align)                                                \
+        . = ALIGN(sbss_align);                                          \
         .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {                         \
                 *(.sbss)                                                \
                 *(.scommon)                                             \
@@ -498,12 +497,10 @@
 #define BSS(bss_align)                                                  \
         . = ALIGN(bss_align);                                           \
         .bss : AT(ADDR(.bss) - LOAD_OFFSET) {                           \
-                VMLINUX_SYMBOL(__bss_start) = .;                        \
                 *(.bss.page_aligned)                                    \
                 *(.dynbss)                                              \
                 *(.bss)                                                 \
                 *(COMMON)                                               \
-                VMLINUX_SYMBOL(__bss_stop) = .;                         \
         }
 
 /*
@@ -735,8 +732,10 @@
                 INIT_RAM_FS                                             \
         }
 
-#define BSS_SECTION(sbss_align, bss_align)                              \
-        SBSS                                                            \
+#define BSS_SECTION(sbss_align, bss_align, stop_align)                  \
+        . = ALIGN(sbss_align);                                          \
+        VMLINUX_SYMBOL(__bss_start) = .;                                \
+        SBSS(sbss_align)                                                \
         BSS(bss_align)                                                  \
-        . = ALIGN(4);
-
+        . = ALIGN(stop_align);                                          \
+        VMLINUX_SYMBOL(__bss_stop) = .;
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 45c18672b093..7174818c2c13 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -43,6 +43,7 @@
         {0x1002, 0x4A4F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x4A50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x4A54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
+        {0x1002, 0x4B48, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x4B49, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x4B4A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x4B4B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R420|RADEON_NEW_MEMMAP}, \
@@ -262,6 +263,7 @@
         {0x1002, 0x9440, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x9441, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x9442, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
+        {0x1002, 0x9443, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x9444, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x9446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x944A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV770|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -346,12 +348,12 @@
         {0x1002, 0x9599, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x959B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV635|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
+        {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+        {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95C5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95C6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95C7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95C9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
-        {0x1002, 0x95C2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
-        {0x1002, 0x95C4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95CD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
         {0x1002, 0x95CE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV620|RADEON_NEW_MEMMAP}, \
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 41862e9a4c20..af4b4826997e 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -506,6 +506,8 @@ typedef struct {
 #define DRM_RADEON_GEM_WAIT_IDLE        0x24
 #define DRM_RADEON_CS                   0x26
 #define DRM_RADEON_INFO                 0x27
+#define DRM_RADEON_GEM_SET_TILING       0x28
+#define DRM_RADEON_GEM_GET_TILING       0x29
 
 #define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
 #define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
@@ -544,7 +546,8 @@ typedef struct {
 #define DRM_IOCTL_RADEON_GEM_WAIT_IDLE  DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
 #define DRM_IOCTL_RADEON_CS             DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
 #define DRM_IOCTL_RADEON_INFO           DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
-
+#define DRM_IOCTL_RADEON_SET_TILING     DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GET_TILING     DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
 
 typedef struct drm_radeon_init {
         enum {
@@ -796,6 +799,24 @@ struct drm_radeon_gem_create {
         uint32_t        flags;
 };
 
+#define RADEON_TILING_MACRO 0x1
+#define RADEON_TILING_MICRO 0x2
+#define RADEON_TILING_SWAP  0x4
+#define RADEON_TILING_SURFACE  0x8 /* this object requires a surface
+                                    * when mapped - i.e. front buffer */
+
+struct drm_radeon_gem_set_tiling {
+        uint32_t        handle;
+        uint32_t        tiling_flags;
+        uint32_t        pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+        uint32_t        handle;
+        uint32_t        tiling_flags;
+        uint32_t        pitch;
+};
+
 struct drm_radeon_gem_mmap {
         uint32_t        handle;
         uint32_t        pad;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 62ed733c52a2..a68829db381a 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -121,6 +121,7 @@ struct ttm_backend {
 #define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
 #define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
 #define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
+#define TTM_PAGE_FLAG_DMA32           (1 << 7)
 
 enum ttm_caching_state {
         tt_uncached,
@@ -353,6 +354,14 @@ struct ttm_bo_driver {
         int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
         void (*sync_obj_unref) (void **sync_obj);
         void *(*sync_obj_ref) (void *sync_obj);
+
+        /* hook to notify driver about a driver move so it
+         * can do tiling things */
+        void (*move_notify)(struct ttm_buffer_object *bo,
+                            struct ttm_mem_reg *new_mem);
+        /* notify the driver we are taking a fault on this BO
+         * and have reserved it */
+        void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
 };
 
 #define TTM_NUM_MEM_TYPES 8
@@ -429,6 +438,8 @@ struct ttm_bo_device {
          */
 
         struct delayed_work wq;
+
+        bool need_dma32;
 };
 
 /**
@@ -648,7 +659,14 @@ extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
 extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
                               struct ttm_mem_global *mem_glob,
                               struct ttm_bo_driver *driver,
-                              uint64_t file_page_offset);
+                              uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 
 /**
  * ttm_bo_reserve:
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
index 889a4c7958ae..d1d433834e4f 100644
--- a/include/drm/ttm/ttm_module.h
+++ b/include/drm/ttm/ttm_module.h
@@ -33,7 +33,7 @@
 
 #include <linux/kernel.h>
 
-#define TTM_PFX "[TTM]"
+#define TTM_PFX "[TTM] "
 
 enum ttm_global_types {
         TTM_GLOBAL_TTM_MEM = 0,
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9b93cafa82a0..ab94335b4bb9 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -36,6 +36,11 @@ struct amba_driver {
         struct amba_id          *id_table;
 };
 
+enum amba_vendor {
+        AMBA_VENDOR_ARM = 0x41,
+        AMBA_VENDOR_ST = 0x80,
+};
+
 #define amba_get_drvdata(d)     dev_get_drvdata(&d->dev)
 #define amba_set_drvdata(d,p)   dev_set_drvdata(&d->dev, p)
 
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
new file mode 100644
index 000000000000..2983e3671adb
--- /dev/null
+++ b/include/linux/amba/pl093.h
@@ -0,0 +1,80 @@
+/* linux/amba/pl093.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * AMBA PL093 SSMC (synchronous static memory controller)
+ *  See DDI0236.pdf (r0p4) for more details
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define SMB_BANK(x)     ((x) * 0x20) /* each bank control set is 0x20 apart */
+
+/* Offsets for SMBxxxxRy registers */
+
+#define SMBIDCYR        (0x00)
+#define SMBWSTRDR       (0x04)
+#define SMBWSTWRR       (0x08)
+#define SMBWSTOENR      (0x0C)
+#define SMBWSTWENR      (0x10)
+#define SMBCR           (0x14)
+#define SMBSR           (0x18)
+#define SMBWSTBRDR      (0x1C)
+
+/* Masks for SMB registers */
+#define IDCY_MASK       (0xf)
+#define WSTRD_MASK      (0xf)
+#define WSTWR_MASK      (0xf)
+#define WSTOEN_MASK     (0xf)
+#define WSTWEN_MASK     (0xf)
+
+/* Notes from datasheet:
+ *      WSTOEN <= WSTRD
+ *      WSTWEN <= WSTWR
+ *
+ * WSTOEN is not used with nWAIT
+ */
+
+/* SMBCR bit definitions */
+#define SMBCR_BIWRITEEN         (1 << 21)
+#define SMBCR_ADDRVALIDWRITEEN  (1 << 20)
+#define SMBCR_SYNCWRITE         (1 << 17)
+#define SMBCR_BMWRITE           (1 << 16)
+#define SMBCR_WRAPREAD          (1 << 14)
+#define SMBCR_BIREADEN          (1 << 13)
+#define SMBCR_ADDRVALIDREADEN   (1 << 12)
+#define SMBCR_SYNCREAD          (1 << 9)
+#define SMBCR_BMREAD            (1 << 8)
+#define SMBCR_SMBLSPOL          (1 << 6)
+#define SMBCR_WP                (1 << 3)
+#define SMBCR_WAITEN            (1 << 2)
+#define SMBCR_WAITPOL           (1 << 1)
+#define SMBCR_RBLE              (1 << 0)
+
+#define SMBCR_BURSTLENWRITE_MASK        (3 << 18)
+#define SMBCR_BURSTLENWRITE_4           (0 << 18)
+#define SMBCR_BURSTLENWRITE_8           (1 << 18)
+#define SMBCR_BURSTLENWRITE_RESERVED    (2 << 18)
+#define SMBCR_BURSTLENWRITE_CONTINUOUS  (3 << 18)
+
+#define SMBCR_BURSTLENREAD_MASK         (3 << 10)
+#define SMBCR_BURSTLENREAD_4            (0 << 10)
+#define SMBCR_BURSTLENREAD_8            (1 << 10)
+#define SMBCR_BURSTLENREAD_16           (2 << 10)
+#define SMBCR_BURSTLENREAD_CONTINUOUS   (3 << 10)
+
+#define SMBCR_MW_MASK                   (3 << 4)
+#define SMBCR_MW_8BIT                   (0 << 4)
+#define SMBCR_MW_16BIT                  (1 << 4)
+#define SMBCR_MW_M32BIT                 (2 << 4)
+
+/* SSMC status registers */
+#define SSMCCSR         (0x200)
+#define SSMCCR          (0x204)
+#define SSMCITCR        (0x208)
+#define SSMCITIP        (0x20C)
+#define SSMCITIOP       (0x210)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 3a52a63c1351..1d52425a6118 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -229,6 +229,11 @@ static inline int bdi_rw_congested(struct backing_dev_info *bdi)
                                   (1 << BDI_async_congested));
 }
 
+enum {
+        BLK_RW_ASYNC    = 0,
+        BLK_RW_SYNC     = 1,
+};
+
 void clear_bdi_congested(struct backing_dev_info *bdi, int sync);
 void set_bdi_congested(struct backing_dev_info *bdi, int sync);
 long congestion_wait(int sync, long timeout);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 0146e0fecf1a..e7cb5dbf6c26 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -70,11 +70,6 @@ enum rq_cmd_type_bits {
         REQ_TYPE_ATA_PC,
 };
 
-enum {
-        BLK_RW_ASYNC    = 0,
-        BLK_RW_SYNC     = 1,
-};
-
 /*
  * For request of type REQ_TYPE_LINUX_BLOCK, rq->cmd[0] is the opcode being
  * sent down (similar to how REQ_TYPE_BLOCK_PC means that ->cmd[] holds a
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 63bc9a4d2926..8cc10411bab2 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
 #include <linux/highmem.h>
 #include <linux/scatterlist.h>
 
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- *   Stops mapping iterator @miter.  @miter should have been started
- *   started using sg_miter_start().  A stopped iteration can be
- *   resumed by calling sg_miter_next() on it.  This is useful when
- *   resources (kmap) need to be released during iteration.
- *
- *   This is a convenience wrapper that will be optimized out for arches
- *   that don't need flush_kernel_dcache_page().
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
-        if (miter->page)
-                flush_kernel_dcache_page(miter->page);
-        sg_miter_stop(miter);
-}
-
 /*
  * 32-bit PIO mapping sg iterator
  *
@@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
  * without DMA support).
  *
  * Best-case reading (transfer from device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_TO_SG);
  *   cb710_sg_dwiter_write_from_io();
- *   cb710_sg_miter_stop_writing();
+ *   sg_miter_stop();
  *
  * Best-case writing (transfer to device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_FROM_SG);
  *   cb710_sg_dwiter_read_to_io();
  *   sg_miter_stop();
  */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 665fa70e4094..90bba9e62286 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -179,14 +179,11 @@ struct cgroup {
          */
         struct list_head release_list;
 
-        /* pids_mutex protects the fields below */
+        /* pids_mutex protects pids_list and cached pid arrays. */
         struct rw_semaphore pids_mutex;
-        /* Array of process ids in the cgroup */
-        pid_t *tasks_pids;
-        /* How many files are using the current tasks_pids array */
-        int pids_use_count;
-        /* Length of the current tasks_pids array */
-        int pids_length;
+
+        /* Linked list of struct cgroup_pids */
+        struct list_head pids_list;
 
         /* For RCU-protected deletion */
         struct rcu_head rcu_head;
@@ -366,6 +363,23 @@ int cgroup_task_count(const struct cgroup *cgrp);
 int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
 
 /*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ *  cgroup_exclude_rmdir();
+ *  ...do some jobs which may access arbitrary empty cgroup
+ *  cgroup_release_and_wakeup_rmdir();
+ *
+ *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
  * Control Group subsystem type.
  * See Documentation/cgroups/cgroups.txt for details
  */
diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index 20a100fe2b4f..3a1dbba4d3ae 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -143,12 +143,3 @@ extern void clockevents_notify(unsigned long reason, void *arg);
 #endif
 
 #endif
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-extern ktime_t clockevents_get_next_event(int cpu);
-#else
-static inline ktime_t clockevents_get_next_event(int cpu)
-{
-        return (ktime_t) { .tv64 = KTIME_MAX };
-}
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c56457c8334e..1219be4fb42e 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs)
         if (cs->enable)
                 ret = cs->enable(cs);
 
-        /* save mult_orig on enable */
+        /*
+         * The frequency may have changed while the clocksource
+         * was disabled. If so the code in ->enable() must update
+         * the mult value to reflect the new frequency. Make sure
+         * mult_orig follows this change.
+         */
         cs->mult_orig = cs->mult;
 
         return ret;
@@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs)
  */
 static inline void clocksource_disable(struct clocksource *cs)
 {
+        /*
+         * Save mult_orig in mult so clocksource_enable() can
+         * restore the value regardless if ->enable() updates
+         * the value of mult or not.
+         */
+        cs->mult = cs->mult_orig;
+
         if (cs->disable)
                 cs->disable(cs);
 }
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index d71f7c0f931b..38fe59dc89ae 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -89,7 +89,6 @@ struct vc_data {
         unsigned int    vc_need_wrap    : 1;
         unsigned int    vc_can_do_color : 1;
         unsigned int    vc_report_mouse : 2;
-        unsigned int    vc_kmalloced    : 1;
         unsigned char   vc_utf          : 1;    /* Unicode UTF-8 encoding */
         unsigned char   vc_utf_count;
                  int    vc_utf_char;
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 2dac064d8359..0026f267da20 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -3,7 +3,6 @@
 
 #ifdef CONFIG_CRASH_DUMP
 #include <linux/kexec.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/proc_fs.h>
 
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d6310657f32..655e7721580a 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -84,7 +84,7 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
 
 typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
                                            struct dm_dev *dev,
-                                           sector_t physical_start,
+                                           sector_t start, sector_t len,
                                            void *data);
 
 typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
@@ -104,7 +104,7 @@ void dm_error(const char *message);
  * Combine device limits.
  */
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-                         sector_t start, void *data);
+                         sector_t start, sector_t len, void *data);
 
 struct dm_dev {
         struct block_device *bdev;
diff --git a/include/linux/device.h b/include/linux/device.h
index ed4e39f2c423..aebb81036db2 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -25,8 +25,6 @@
 #include <asm/atomic.h>
 #include <asm/device.h>
 
-#define BUS_ID_SIZE             20
-
 struct device;
 struct device_private;
 struct device_driver;
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 634a5e5aba3e..7499b3667798 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -874,7 +874,7 @@ struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *);
 struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
         sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result,
-        int create, int extend_disksize);
+        int create);
 
 extern struct inode *ext3_iget(struct super_block *, unsigned long);
 extern int  ext3_write_inode (struct inode *, int);
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 000000000000..23c1ec79a31b
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,47 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+        union {
+                struct {
+                        int element_size;
+                        int total_nr_elements;
+                        struct flex_array_part *parts[0];
+                };
+                /*
+                 * This little trick makes sure that
+                 * sizeof(flex_array) == PAGE_SIZE
+                 */
+                char padding[FLEX_ARRAY_BASE_SIZE];
+        };
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+        .element_size = (size),         \
+        .total_nr_elements = (total),   \
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+                gfp_t flags);
+void *flex_array_get(struct flex_array *fa, int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0872372184fe..a36ffa5a77a4 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1946,6 +1946,7 @@ extern void putname(const char *name);
 extern int register_blkdev(unsigned int, const char *);
 extern void unregister_blkdev(unsigned int, const char *);
 extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 6c3de999fb34..4d6f47b51189 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -352,7 +352,7 @@ extern void fsnotify_unmount_inodes(struct list_head *list);
 /* put here because inotify does some weird stuff when destroying watches */
 extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
                                                     void *data, int data_is, const char *name,
-                                                    u32 cookie);
+                                                    u32 cookie, gfp_t gfp);
 
 #else
 
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 45257475623c..8246c697863d 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,7 +2,9 @@
 #define LINUX_HARDIRQ_H
 
 #include <linux/preempt.h>
+#ifdef CONFIG_PREEMPT
 #include <linux/smp_lock.h>
+#endif
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
 #include <asm/hardirq.h>
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 54648e625efd..4759917adc71 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -448,7 +448,7 @@ extern void timer_stats_update_stats(void *timer, pid_t pid, void *startf,
 
 static inline void timer_stats_account_hrtimer(struct hrtimer *timer)
 {
-        if (likely(!timer->start_pid))
+        if (likely(!timer->start_site))
                 return;
         timer_stats_update_stats(timer, timer->start_pid, timer->start_site,
                                  timer->function, timer->start_comm, 0);
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 2721f07e9354..35e7df1e9f30 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -14,6 +14,7 @@
 #include <linux/irqflags.h>
 #include <linux/smp.h>
 #include <linux/percpu.h>
+#include <linux/hrtimer.h>
 
 #include <asm/atomic.h>
 #include <asm/ptrace.h>
@@ -64,11 +65,13 @@
  * IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
  * IRQTF_DIED      - handler thread died
  * IRQTF_WARNED    - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
+ * IRQTF_AFFINITY  - irq thread is requested to adjust affinity
  */
 enum {
         IRQTF_RUNTHREAD,
         IRQTF_DIED,
         IRQTF_WARNED,
+        IRQTF_AFFINITY,
 };
 
 typedef irqreturn_t (*irq_handler_t)(int, void *);
@@ -517,6 +520,31 @@ extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
 extern void tasklet_init(struct tasklet_struct *t,
                          void (*func)(unsigned long), unsigned long data);
 
+struct tasklet_hrtimer {
+        struct hrtimer          timer;
+        struct tasklet_struct   tasklet;
+        enum hrtimer_restart    (*function)(struct hrtimer *);
+};
+
+extern void
+tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+                     enum hrtimer_restart (*function)(struct hrtimer *),
+                     clockid_t which_clock, enum hrtimer_mode mode);
+
+static inline
+int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time,
+                          const enum hrtimer_mode mode)
+{
+        return hrtimer_start(&ttimer->timer, time, mode);
+}
+
+static inline
+void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
+{
+        hrtimer_cancel(&ttimer->timer);
+        tasklet_kill(&ttimer->tasklet);
+}
+
 /*
  * Autoprobing for irqs:
  *
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dd05434fa45f..4da4a75c3f1e 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
          * a race).
          */
         if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
-                atomic_long_inc(&ioc->refcount);
+                atomic_inc(&ioc->nr_tasks);
                 return ioc;
         }
 
diff --git a/include/linux/kmemleak.h b/include/linux/kmemleak.h
index 7796aed6cdd5..6a63807f714e 100644
--- a/include/linux/kmemleak.h
+++ b/include/linux/kmemleak.h
@@ -27,6 +27,7 @@ extern void kmemleak_init(void);
 extern void kmemleak_alloc(const void *ptr, size_t size, int min_count,
                            gfp_t gfp);
 extern void kmemleak_free(const void *ptr);
+extern void kmemleak_free_part(const void *ptr, size_t size);
 extern void kmemleak_padding(const void *ptr, unsigned long offset,
                              size_t size);
 extern void kmemleak_not_leak(const void *ptr);
@@ -71,6 +72,9 @@ static inline void kmemleak_alloc_recursive(const void *ptr, size_t size,
 static inline void kmemleak_free(const void *ptr)
 {
 }
+static inline void kmemleak_free_part(const void *ptr, size_t size)
+{
+}
 static inline void kmemleak_free_recursive(const void *ptr, unsigned long flags)
 {
 }
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index 7bc1440fc473..2fb1dcbcb5aa 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -1,5 +1,7 @@
-/* Things the lguest guest needs to know.  Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know.  Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
 #ifndef _LINUX_LGUEST_H
 #define _LINUX_LGUEST_H
 
@@ -11,32 +13,41 @@
 #define LG_CLOCK_MIN_DELTA      100UL
 #define LG_CLOCK_MAX_DELTA      ULONG_MAX
 
-/*G:032 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
  * lguest_data".  Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
-        /* 512 == enabled (same as eflags in normal hardware).  The Guest
-         * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+        /*
+         * 512 == enabled (same as eflags in normal hardware).  The Guest
+         * changes interrupts so often that a hypercall is too slow.
+         */
         unsigned int irq_enabled;
         /* Fine-grained interrupt disabling by the Guest */
         DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
 
-        /* The Host writes the virtual address of the last page fault here,
+        /*
+         * The Host writes the virtual address of the last page fault here,
          * which saves the Guest a hypercall.  CR2 is the native register where
-         * this address would normally be found. */
+         * this address would normally be found.
+         */
         unsigned long cr2;
 
         /* Wallclock time set by the Host. */
         struct timespec time;
 
-        /* Interrupt pending set by the Host.  The Guest should do a hypercall
-         * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+        /*
+         * Interrupt pending set by the Host.  The Guest should do a hypercall
+         * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+         */
         int irq_pending;
 
-        /* Async hypercall ring.  Instead of directly making hypercalls, we can
+        /*
+         * Async hypercall ring.  Instead of directly making hypercalls, we can
          * place them in here for processing the next time the Host wants.
-         * This batching can be quite efficient. */
+         * This batching can be quite efficient.
+         */
 
         /* 0xFF == done (set by Host), 0 == pending (set by Guest). */
         u8 hcall_status[LHCALL_RING_SIZE];
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index bfefbdf7498a..495203ff221c 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -29,8 +29,10 @@ struct lguest_device_desc {
         __u8 type;
         /* The number of virtqueues (first in config array) */
         __u8 num_vq;
-        /* The number of bytes of feature bits.  Multiply by 2: one for host
-         * features and one for Guest acknowledgements. */
+        /*
+         * The number of bytes of feature bits.  Multiply by 2: one for host
+         * features and one for Guest acknowledgements.
+         */
         __u8 feature_len;
         /* The number of bytes of the config array after virtqueues. */
         __u8 config_len;
@@ -39,8 +41,10 @@ struct lguest_device_desc {
         __u8 config[0];
 };
 
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
 struct lguest_vqconfig {
         /* The number of entries in the virtio_ring */
         __u16 num;
@@ -61,7 +65,9 @@ enum lguest_req
         LHREQ_EVENTFD, /* + address, fd. */
 };
 
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
 #define LGUEST_VRING_ALIGN      4096
 #endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3d501db36a26..e5b6e33c6571 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -385,6 +385,7 @@ enum {
                                                     not multiple of 16 bytes */
         ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),  /* firmware update warning */
         ATA_HORKAGE_1_5_GBPS    = (1 << 13),    /* force 1.5 Gbps */
+        ATA_HORKAGE_NOSETXFER   = (1 << 14),    /* skip SETXFER, SATA only */
 
          /* DMA mask for user DMA control: User visible values; DO NOT
             renumber */
@@ -588,6 +589,7 @@ struct ata_device {
 #endif
         /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
         u64                     n_sectors;      /* size of device, if ATA */
+        u64                     n_native_sectors; /* native size, if ATA */
         unsigned int            class;          /* ATA_DEV_xxx */
         unsigned long           unpark_deadline;
 
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index c9663c690303..53b94e025c7c 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -18,5 +18,8 @@ extern struct phy_device *of_phy_connect(struct net_device *dev,
                                          struct device_node *phy_np,
                                          void (*hndlr)(struct net_device *),
                                          u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+                                         void (*hndlr)(struct net_device *),
+                                         phy_interface_t iface);
 
 #endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 5e970c7d3fd5..bd15d7a5f5ce 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -120,8 +120,9 @@ enum perf_counter_sample_format {
         PERF_SAMPLE_ID                          = 1U << 6,
         PERF_SAMPLE_CPU                         = 1U << 7,
         PERF_SAMPLE_PERIOD                      = 1U << 8,
+        PERF_SAMPLE_STREAM_ID                   = 1U << 9,
 
-        PERF_SAMPLE_MAX = 1U << 9,              /* non-ABI */
+        PERF_SAMPLE_MAX = 1U << 10,             /* non-ABI */
 };
 
 /*
@@ -312,16 +313,7 @@ enum perf_event_type {
          *      struct perf_event_header        header;
          *      u64                             time;
          *      u64                             id;
-         *      u64                             sample_period;
-         * };
-         */
-        PERF_EVENT_PERIOD               = 4,
-
-        /*
-         * struct {
-         *      struct perf_event_header        header;
-         *      u64                             time;
-         *      u64                             id;
+         *      u64                             stream_id;
          * };
          */
         PERF_EVENT_THROTTLE             = 5,
@@ -356,6 +348,7 @@ enum perf_event_type {
          *      { u64                   time;     } && PERF_SAMPLE_TIME
          *      { u64                   addr;     } && PERF_SAMPLE_ADDR
          *      { u64                   id;       } && PERF_SAMPLE_ID
+         *      { u64                   stream_id;} && PERF_SAMPLE_STREAM_ID
          *      { u32                   cpu, res; } && PERF_SAMPLE_CPU
          *      { u64                   period;   } && PERF_SAMPLE_PERIOD
          *
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff9b27e..126120819a0d 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -40,7 +40,10 @@ enum {
  * Security-relevant compatibility flags that must be
  * cleared upon setuid or setgid exec:
  */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+                            ADDR_NO_RANDOMIZE  | \
+                            ADDR_COMPAT_LAYOUT | \
+                            MMAP_PAGE_ZERO)
 
 /*
  * Personality types.
diff --git a/include/linux/pps.h b/include/linux/pps.h
index cfe5c7214ec6..0194ab06177b 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -22,6 +22,8 @@
 #ifndef _PPS_H_
 #define _PPS_H_
 
+#include <linux/types.h>
+
 #define PPS_VERSION             "5.3.6"
 #define PPS_MAX_SOURCES         16              /* should be enough... */
 
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 7bc457593684..26361c4c037a 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -7,7 +7,6 @@
 #ifndef _LINUX_QUOTAOPS_
 #define _LINUX_QUOTAOPS_
 
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 
 static inline struct quota_info *sb_dqopt(struct super_block *sb)
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 2ce29831feb6..278777fa8a3a 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -224,7 +224,7 @@ void rfkill_destroy(struct rfkill *rfkill);
  * should be blocked) so that drivers need not keep track of the soft
  * block state -- which they might not be able to.
  */
-bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
 
 /**
  * rfkill_set_sw_state - Set the internal rfkill software block state
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index e5996984ddd0..9aaf5bfdad1a 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 
 #define SG_MITER_ATOMIC         (1 << 0)         /* use kmap_atomic */
+#define SG_MITER_TO_SG          (1 << 1)        /* flush back to phys on unmap */
+#define SG_MITER_FROM_SG        (1 << 2)        /* nop */
 
 struct sg_mapping_iter {
         /* the following three fields can be accessed directly */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 16a982e389fb..3ab08e4bb6b8 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -209,7 +209,7 @@ extern unsigned long long time_sync_thresh;
                         ((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
 #define task_contributes_to_load(task)  \
                                 ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
-                                 (task->flags & PF_FROZEN) == 0)
+                                 (task->flags & PF_FREEZING) == 0)
 
 #define __set_task_state(tsk, state_value)              \
         do { (tsk)->state = (state_value); } while (0)
@@ -1680,6 +1680,7 @@ extern cputime_t task_gtime(struct task_struct *p);
 #define PF_MEMALLOC     0x00000800      /* Allocating memory */
 #define PF_FLUSHER      0x00001000      /* responsible for disk writeback */
 #define PF_USED_MATH    0x00002000      /* if unset the fpu must be initialized before use */
+#define PF_FREEZING     0x00004000      /* freeze in progress. do not account to load */
 #define PF_NOFREEZE     0x00008000      /* this thread should not be frozen */
 #define PF_FROZEN       0x00010000      /* frozen for system suspend */
 #define PF_FSTRANS      0x00020000      /* inside a filesystem transaction */
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index b47b3f039d14..f2c69a2cca17 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1342,12 +1342,12 @@ static inline int skb_network_offset(const struct sk_buff *skb)
  * shifting the start of the packet by 2 bytes. Drivers should do this
  * with:
  *
- * skb_reserve(NET_IP_ALIGN);
+ * skb_reserve(skb, NET_IP_ALIGN);
  *
  * The downside to this alignment of the IP header is that the DMA is now
  * unaligned. On some architectures the cost of an unaligned DMA is high
  * and this cost outweighs the gains made by aligning the IP header.
- * 
+ *
  * Since this trade off varies between architectures, we allow NET_IP_ALIGN
  * to be overridden.
  */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index 4dcbc2c71491..c1c862b1d01a 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -11,6 +11,7 @@
 #include <linux/workqueue.h>
 #include <linux/kobject.h>
 #include <linux/kmemtrace.h>
+#include <linux/kmemleak.h>
 
 enum stat_item {
         ALLOC_FASTPATH,         /* Allocation from cpu slab */
@@ -233,6 +234,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags)
         unsigned int order = get_order(size);
         void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order);
 
+        kmemleak_alloc(ret, size, 1, flags);
         trace_kmalloc(_THIS_IP_, ret, size, PAGE_SIZE << order, flags);
 
         return ret;
diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h
index d8910b68e1bd..b99c625fddfe 100644
--- a/include/linux/sunrpc/xdr.h
+++ b/include/linux/sunrpc/xdr.h
@@ -12,7 +12,6 @@
 #include <linux/uio.h>
 #include <asm/byteorder.h>
 #include <linux/scatterlist.h>
-#include <linux/smp_lock.h>
 
 /*
  * Buffer adjustment
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1488d8c81aac..e8c6c9136c97 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void no_tty(void);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
 extern void tty_buffer_free_all(struct tty_struct *tty);
 extern void tty_buffer_flush(struct tty_struct *tty);
 extern void tty_buffer_init(struct tty_struct *tty);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index b7fe13883bdb..98c114323a8b 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -19,15 +19,6 @@ struct iovec
         __kernel_size_t iov_len; /* Must be size_t (1003.1g) */
 };
 
-#ifdef __KERNEL__
-
-struct kvec {
-        void *iov_base; /* and that should *never* hold a userland pointer */
-        size_t iov_len;
-};
-
-#endif
-
 /*
  *      UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
  */
@@ -35,6 +26,13 @@ struct kvec {
 #define UIO_FASTIOV     8
 #define UIO_MAXIOV      1024
 
+#ifdef __KERNEL__
+
+struct kvec {
+        void *iov_base; /* and that should *never* hold a userland pointer */
+        size_t iov_len;
+};
+
 /*
  * Total number of bytes covered by an iovec.
  *
@@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
 
 #endif
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 84929e914034..b1e3c2fbfe11 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -888,8 +888,6 @@ struct usb_driver {
  * struct usb_device_driver - identifies USB device driver to usbcore
  * @name: The driver name should be unique among USB drivers,
  *      and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- *      device node to create.
  * @probe: Called to see if the driver is willing to manage a particular
  *      device.  If it is, probe returns zero and uses dev_set_drvdata()
  *      to associate driver-specific data with the device.  If unwilling
@@ -924,6 +922,8 @@ extern struct bus_type usb_bus_type;
 /**
  * struct usb_class_driver - identifies a USB driver that wants to use the USB major number
  * @name: the usb class device name for this driver.  Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ *      device node to create.
  * @fops: pointer to the struct file_operations of this driver.
  * @minor_base: the start of the minor range for this driver.
  *
@@ -1046,6 +1046,8 @@ typedef void (*usb_complete_t)(struct urb *);
  *      the device driver is saying that it provided this DMA address,
  *      which the host controller driver should use in preference to the
  *      transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
  * @transfer_buffer_length: How big is transfer_buffer.  The transfer may
  *      be broken up into chunks according to the current maximum packet
  *      size for the endpoint, which is a function of the configuration
diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h
deleted file mode 100644
index e115ae6df1da..000000000000
--- a/include/linux/usb/langwell_otg.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD               0x30
-#       define USBCMD_RST               BIT(1)
-#       define USBCMD_RS                BIT(0)
-#define CI_USBSTS               0x34
-#       define USBSTS_SLI               BIT(8)
-#       define USBSTS_URI               BIT(6)
-#       define USBSTS_PCI               BIT(2)
-#define CI_PORTSC1              0x74
-#       define PORTSC_PP                BIT(12)
-#       define PORTSC_LS                (BIT(11) | BIT(10))
-#       define PORTSC_SUSP              BIT(7)
-#       define PORTSC_CCS               BIT(0)
-#define CI_HOSTPC1              0xb4
-#       define HOSTPC1_PHCD             BIT(22)
-#define CI_OTGSC                0xf4
-#       define OTGSC_DPIE               BIT(30)
-#       define OTGSC_1MSE               BIT(29)
-#       define OTGSC_BSEIE              BIT(28)
-#       define OTGSC_BSVIE              BIT(27)
-#       define OTGSC_ASVIE              BIT(26)
-#       define OTGSC_AVVIE              BIT(25)
-#       define OTGSC_IDIE               BIT(24)
-#       define OTGSC_DPIS               BIT(22)
-#       define OTGSC_1MSS               BIT(21)
-#       define OTGSC_BSEIS              BIT(20)
-#       define OTGSC_BSVIS              BIT(19)
-#       define OTGSC_ASVIS              BIT(18)
-#       define OTGSC_AVVIS              BIT(17)
-#       define OTGSC_IDIS               BIT(16)
-#       define OTGSC_DPS                BIT(14)
-#       define OTGSC_1MST               BIT(13)
-#       define OTGSC_BSE                BIT(12)
-#       define OTGSC_BSV                BIT(11)
-#       define OTGSC_ASV                BIT(10)
-#       define OTGSC_AVV                BIT(9)
-#       define OTGSC_ID                 BIT(8)
-#       define OTGSC_HABA               BIT(7)
-#       define OTGSC_HADP               BIT(6)
-#       define OTGSC_IDPU               BIT(5)
-#       define OTGSC_DP                 BIT(4)
-#       define OTGSC_OT                 BIT(3)
-#       define OTGSC_HAAR               BIT(2)
-#       define OTGSC_VC                 BIT(1)
-#       define OTGSC_VD                 BIT(0)
-#       define OTGSC_INTEN_MASK         (0x7f << 24)
-#       define OTGSC_INTSTS_MASK        (0x7f << 16)
-#define CI_USBMODE              0xf8
-#       define USBMODE_CM               (BIT(1) | BIT(0))
-#       define USBMODE_IDLE             0
-#       define USBMODE_DEVICE           0x2
-#       define USBMODE_HOST             0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
-        /* Input */
-        int a_bus_resume;
-        int a_bus_suspend;
-        int a_conn;
-        int a_sess_vld;
-        int a_srp_det;
-        int a_vbus_vld;
-        int b_bus_resume;
-        int b_bus_suspend;
-        int b_conn;
-        int b_se0_srp;
-        int b_sess_end;
-        int b_sess_vld;
-        int id;
-
-        /* Internal variables */
-        int a_set_b_hnp_en;
-        int b_srp_done;
-        int b_hnp_enable;
-
-        /* Timeout indicator for timers */
-        int a_wait_vrise_tmout;
-        int a_wait_bcon_tmout;
-        int a_aidl_bdis_tmout;
-        int b_ase0_brst_tmout;
-        int b_bus_suspend_tmout;
-        int b_srp_res_tmout;
-
-        /* Informative variables */
-        int a_bus_drop;
-        int a_bus_req;
-        int a_clr_err;
-        int a_suspend_req;
-        int b_bus_req;
-
-        /* Output */
-        int drv_vbus;
-        int loc_conn;
-        int loc_sof;
-
-        /* Others */
-        int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE   100
-#define TA_WAIT_BCON    30000
-#define TA_AIDL_BDIS    15000
-#define TB_ASE0_BRST    5000
-#define TB_SE0_SRP      2
-#define TB_SRP_RES      100
-#define TB_BUS_SUSPEND  500
-
-struct langwell_otg_timer {
-        unsigned long expires;  /* Number of count increase to timeout */
-        unsigned long count;    /* Tick counter */
-        void (*function)(unsigned long);        /* Timeout function */
-        unsigned long data;     /* Data passed to function */
-        struct list_head list;
-};
-
-struct langwell_otg {
-        struct otg_transceiver  otg;
-        struct otg_hsm          hsm;
-        void __iomem            *regs;
-        unsigned                region;
-        struct pci_driver       *host_ops;
-        struct pci_driver       *client_ops;
-        struct pci_dev          *pdev;
-        struct work_struct      work;
-        struct workqueue_struct *qwork;
-        spinlock_t              lock;
-        spinlock_t              wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
-        return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
-        printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
-        do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 95846d988011..74f16876f38d 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -338,6 +338,7 @@ struct v4l2_pix_format {
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
 #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
 #define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
 #define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
 #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index be7d255fc7cf..8dab9f2b8832 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -20,8 +20,7 @@
 
 #define VIRTIO_BLK_ID_BYTES     (sizeof(__u16[256]))    /* IDENTIFY DATA */
 
-struct virtio_blk_config
-{
+struct virtio_blk_config {
         /* The capacity (in 512-byte sectors). */
         __u64 capacity;
         /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
@@ -50,8 +49,7 @@ struct virtio_blk_config
 #define VIRTIO_BLK_T_BARRIER    0x80000000
 
 /* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
         /* VIRTIO_BLK_T* */
         __u32 type;
         /* io priority. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 99f514575f6a..e547e3c8ee9a 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -79,8 +79,7 @@
  *      the dev->feature bits if it wants.
  */
 typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
         void (*get)(struct virtio_device *vdev, unsigned offset,
                     void *buf, unsigned len);
         void (*set)(struct virtio_device *vdev, unsigned offset,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index cec79adbe3ea..d8dd539c9f48 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -27,11 +27,11 @@
 #define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */
 #define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */
 #define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */
+#define VIRTIO_NET_F_CTRL_RX_EXTRA 20   /* Extra RX mode control support */
 
 #define VIRTIO_NET_S_LINK_UP    1       /* Link is up */
 
-struct virtio_net_config
-{
+struct virtio_net_config {
         /* The config defining mac address (if VIRTIO_NET_F_MAC) */
         __u8 mac[6];
         /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
@@ -40,8 +40,7 @@ struct virtio_net_config
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset
         __u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame
@@ -81,14 +80,19 @@ typedef __u8 virtio_net_ctrl_ack;
 #define VIRTIO_NET_ERR    1
 
 /*
- * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
- * ALLMULTI commands require an "out" sg entry containing a 1 byte
- * state value, zero = disable, non-zero = enable.  These commands
- * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Control the RX mode, ie. promisucous, allmulti, etc...
+ * All commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  Commands
+ * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.
  */
 #define VIRTIO_NET_CTRL_RX    0
  #define VIRTIO_NET_CTRL_RX_PROMISC      0
  #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+ #define VIRTIO_NET_CTRL_RX_ALLUNI       2
+ #define VIRTIO_NET_CTRL_RX_NOMULTI      3
+ #define VIRTIO_NET_CTRL_RX_NOUNI        4
+ #define VIRTIO_NET_CTRL_RX_NOBCAST      5
 
 /*
  * Control the MAC filter table.
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 693e0ec5afa6..e4d144b132b5 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -30,8 +30,7 @@
 #define VIRTIO_RING_F_INDIRECT_DESC     28
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
         /* Address (guest-physical). */
         __u64 addr;
         /* Length. */
@@ -42,24 +41,21 @@ struct vring_desc
         __u16 next;
 };
 
-struct vring_avail
-{
+struct vring_avail {
         __u16 flags;
         __u16 idx;
         __u16 ring[];
 };
 
 /* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
         /* Index of start of used descriptor chain. */
         __u32 id;
         /* Total length of the descriptor chain which was used (written to) */
         __u32 len;
 };
 
-struct vring_used
-{
+struct vring_used {
         __u16 flags;
         __u16 idx;
         struct vring_used_elem ring[];
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 11a4a2d3e364..94e908c0d7a0 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -60,6 +60,10 @@ enum {
         V4L2_IDENT_OV7670 = 250,
         V4L2_IDENT_OV7720 = 251,
         V4L2_IDENT_OV7725 = 252,
+        V4L2_IDENT_OV7660 = 253,
+        V4L2_IDENT_OV9650 = 254,
+        V4L2_IDENT_OV9655 = 255,
+        V4L2_IDENT_SOI968 = 256,
 
         /* module saa7146: reserved range 300-309 */
         V4L2_IDENT_SAA7146 = 300,
@@ -161,6 +165,9 @@ enum {
         /* module tw9910: just ident 9910 */
         V4L2_IDENT_TW9910 = 9910,
 
+        /* module sn9c20x: just ident 10000 */
+        V4L2_IDENT_SN9C20X = 10000,
+
         /* module msp3400: reserved range 34000-34999 and 44000-44999 */
         V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
                                         use internally (tveeprom.c). */
@@ -237,6 +244,11 @@ enum {
         V4L2_IDENT_MT9V022IX7ATC        = 45010, /* No way to detect "normal" I77ATx */
         V4L2_IDENT_MT9V022IX7ATM        = 45015, /* and "lead free" IA7ATx chips */
         V4L2_IDENT_MT9T031              = 45020,
+        V4L2_IDENT_MT9V111              = 45031,
+        V4L2_IDENT_MT9V112              = 45032,
+
+        /* HV7131R CMOS sensor: just ident 46000 */
+        V4L2_IDENT_HV7131R              = 46000,
 
         /* module cs53132a: just ident 53132 */
         V4L2_IDENT_CS53l32A = 53132,
diff --git a/include/net/rose.h b/include/net/rose.h
index cbd5364b2c8a..5ba9f02731eb 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -156,7 +156,7 @@ extern int  sysctl_rose_maximum_vcs;
 extern int  sysctl_rose_window_size;
 extern int  rosecmp(rose_address *, rose_address *);
 extern int  rosecmpm(rose_address *, rose_address *, unsigned short);
-extern const char *rose2asc(const rose_address *);
+extern char *rose2asc(char *buf, const rose_address *);
 extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
 extern void rose_kill_by_neigh(struct rose_neigh *);
 extern unsigned int rose_new_lci(struct rose_neigh *);
diff --git a/include/net/sock.h b/include/net/sock.h
index 2c0da9239b95..950409dcec3d 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -104,15 +104,15 @@ struct net;
 
 /**
  *      struct sock_common - minimal network layer representation of sockets
+ *      @skc_node: main hash linkage for various protocol lookup tables
+ *      @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ *      @skc_refcnt: reference count
+ *      @skc_hash: hash value used with various protocol lookup tables
  *      @skc_family: network address family
  *      @skc_state: Connection state
  *      @skc_reuse: %SO_REUSEADDR setting
  *      @skc_bound_dev_if: bound device index if != 0
- *      @skc_node: main hash linkage for various protocol lookup tables
- *      @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
  *      @skc_bind_node: bind hash linkage for various protocol lookup tables
- *      @skc_refcnt: reference count
- *      @skc_hash: hash value used with various protocol lookup tables
  *      @skc_prot: protocol handlers inside a network family
  *      @skc_net: reference to the network namespace of this socket
  *
@@ -120,17 +120,21 @@ struct net;
  *      for struct sock and struct inet_timewait_sock.
  */
 struct sock_common {
-        unsigned short          skc_family;
-        volatile unsigned char  skc_state;
-        unsigned char           skc_reuse;
-        int                     skc_bound_dev_if;
+        /*
+         * first fields are not copied in sock_copy()
+         */
         union {
                 struct hlist_node       skc_node;
                 struct hlist_nulls_node skc_nulls_node;
         };
-        struct hlist_node       skc_bind_node;
         atomic_t                skc_refcnt;
+
         unsigned int            skc_hash;
+        unsigned short          skc_family;
+        volatile unsigned char  skc_state;
+        unsigned char           skc_reuse;
+        int                     skc_bound_dev_if;
+        struct hlist_node       skc_bind_node;
         struct proto            *skc_prot;
 #ifdef CONFIG_NET_NS
         struct net              *skc_net;
@@ -208,15 +212,17 @@ struct sock {
          * don't add nothing before this first member (__sk_common) --acme
          */
         struct sock_common      __sk_common;
+#define sk_node                 __sk_common.skc_node
+#define sk_nulls_node           __sk_common.skc_nulls_node
+#define sk_refcnt               __sk_common.skc_refcnt
+
+#define sk_copy_start           __sk_common.skc_hash
+#define sk_hash                 __sk_common.skc_hash
 #define sk_family               __sk_common.skc_family
 #define sk_state                __sk_common.skc_state
 #define sk_reuse                __sk_common.skc_reuse
 #define sk_bound_dev_if         __sk_common.skc_bound_dev_if
-#define sk_node                 __sk_common.skc_node
-#define sk_nulls_node           __sk_common.skc_nulls_node
 #define sk_bind_node            __sk_common.skc_bind_node
-#define sk_refcnt               __sk_common.skc_refcnt
-#define sk_hash                 __sk_common.skc_hash
 #define sk_prot                 __sk_common.skc_prot
 #define sk_net                  __sk_common.skc_net
         kmemcheck_bitfield_begin(flags);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 19f4150f4d4d..88af84306471 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1425,6 +1425,11 @@ struct tcp_request_sock_ops {
 #ifdef CONFIG_TCP_MD5SIG
         struct tcp_md5sig_key   *(*md5_lookup) (struct sock *sk,
                                                 struct request_sock *req);
+        int                     (*calc_md5_hash) (char *location,
+                                                  struct tcp_md5sig_key *md5,
+                                                  struct sock *sk,
+                                                  struct request_sock *req,
+                                                  struct sk_buff *skb);
 #endif
 };
 
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d6b05f42dd44..9a74b468a229 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM block
+
 #if !defined(_TRACE_BLOCK_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_BLOCK_H
 
@@ -5,9 +8,6 @@
 #include <linux/blkdev.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM block
-
 TRACE_EVENT(block_rq_abort,
 
         TP_PROTO(struct request_queue *q, struct request *rq),
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index acf4cc9cd36d..7d8b5bc74185 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -1,9 +1,9 @@
-#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EXT4_H
-
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM ext4
 
+#if !defined(_TRACE_EXT4_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EXT4_H
+
 #include <linux/writeback.h>
 #include "../../../fs/ext4/ext4.h"
 #include "../../../fs/ext4/mballoc.h"
@@ -34,7 +34,8 @@ TRACE_EVENT(ext4_free_inode,
 
         TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
                   jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->mode,
-                  __entry->uid, __entry->gid, __entry->blocks)
+                  __entry->uid, __entry->gid,
+                  (unsigned long long) __entry->blocks)
 );
 
 TRACE_EVENT(ext4_request_inode,
@@ -189,7 +190,7 @@ TRACE_EVENT(ext4_journalled_write_end,
                   __entry->copied)
 );
 
-TRACE_EVENT(ext4_da_writepage,
+TRACE_EVENT(ext4_writepage,
         TP_PROTO(struct inode *inode, struct page *page),
 
         TP_ARGS(inode, page),
@@ -341,49 +342,6 @@ TRACE_EVENT(ext4_da_write_end,
                   __entry->copied)
 );
 
-TRACE_EVENT(ext4_normal_writepage,
-        TP_PROTO(struct inode *inode, struct page *page),
-
-        TP_ARGS(inode, page),
-
-        TP_STRUCT__entry(
-                __field(        dev_t,  dev                     )
-                __field(        ino_t,  ino                     )
-                __field(        pgoff_t, index                  )
-        ),
-
-        TP_fast_assign(
-                __entry->dev    = inode->i_sb->s_dev;
-                __entry->ino    = inode->i_ino;
-                __entry->index  = page->index;
-        ),
-
-        TP_printk("dev %s ino %lu page_index %lu",
-                  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
-TRACE_EVENT(ext4_journalled_writepage,
-        TP_PROTO(struct inode *inode, struct page *page),
-
-        TP_ARGS(inode, page),
-
-        TP_STRUCT__entry(
-                __field(        dev_t,  dev                     )
-                __field(        ino_t,  ino                     )
-                __field(        pgoff_t, index                  )
-
-        ),
-
-        TP_fast_assign(
-                __entry->dev    = inode->i_sb->s_dev;
-                __entry->ino    = inode->i_ino;
-                __entry->index  = page->index;
-        ),
-
-        TP_printk("dev %s ino %lu page_index %lu",
-                  jbd2_dev_to_name(__entry->dev), __entry->ino, __entry->index)
-);
-
 TRACE_EVENT(ext4_discard_blocks,
         TP_PROTO(struct super_block *sb, unsigned long long blk,
                         unsigned long long count),
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index b0c7ede55eb1..1cb0c3aa11e6 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM irq
+
 #if !defined(_TRACE_IRQ_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_IRQ_H
 
 #include <linux/tracepoint.h>
 #include <linux/interrupt.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM irq
-
 #define softirq_name(sirq) { sirq##_SOFTIRQ, #sirq }
 #define show_softirq_name(val)                  \
         __print_symbolic(val,                   \
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index 845b0b4b48fd..10813fa0c8d0 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM jbd2
+
 #if !defined(_TRACE_JBD2_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_JBD2_H
 
 #include <linux/jbd2.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM jbd2
-
 TRACE_EVENT(jbd2_checkpoint,
 
         TP_PROTO(journal_t *journal, int result),
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index 9baba50d6512..1493c541f9c4 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kmem
+
 #if !defined(_TRACE_KMEM_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_KMEM_H
 
 #include <linux/types.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM kmem
-
 /*
  * The order of these masks is important. Matching masks will be seen
  * first and the left over flags will end up showing by themselves.
diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h
index 0e956c9dfd7e..bcf1d209a00d 100644
--- a/include/trace/events/lockdep.h
+++ b/include/trace/events/lockdep.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lockdep
+
 #if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_LOCKDEP_H
 
 #include <linux/lockdep.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lockdep
-
 #ifdef CONFIG_LOCKDEP
 
 TRACE_EVENT(lock_acquire,
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 24ab5bcff7b2..8949bb7eb082 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM sched
+
 #if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_SCHED_H
 
 #include <linux/sched.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM sched
-
 /*
  * Tracepoint for calling kthread_stop, performed to end a kthread:
  */
diff --git a/include/trace/events/skb.h b/include/trace/events/skb.h
index 1e8fabb57c06..e499863b9669 100644
--- a/include/trace/events/skb.h
+++ b/include/trace/events/skb.h
@@ -1,12 +1,12 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM skb
+
 #if !defined(_TRACE_SKB_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_SKB_H
 
 #include <linux/skbuff.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM skb
-
 /*
  * Tracepoint for free an sk_buff:
  */
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index 035f1bff288e..fcfd9a1e4b96 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -1,3 +1,6 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM workqueue
+
 #if !defined(_TRACE_WORKQUEUE_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_WORKQUEUE_H
 
@@ -5,9 +8,6 @@
 #include <linux/sched.h>
 #include <linux/tracepoint.h>
 
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM workqueue
-
 TRACE_EVENT(workqueue_insertion,
 
         TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
diff --git a/init/Kconfig b/init/Kconfig
index 1ce05a4cb5f6..cb2c09270226 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -962,7 +962,7 @@ config PERF_COUNTERS
 
 config EVENT_PROFILE
         bool "Tracepoint profile sources"
-        depends on PERF_COUNTERS && EVENT_TRACER
+        depends on PERF_COUNTERS && EVENT_TRACING
         default y
 
 endmenu
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3737a682cdf5..b6eadfe30e7b 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -47,6 +47,7 @@
 #include <linux/hash.h>
 #include <linux/namei.h>
 #include <linux/smp_lock.h>
+#include <linux/pid_namespace.h>
 
 #include <asm/atomic.h>
 
@@ -734,16 +735,28 @@ static void cgroup_d_remove_dir(struct dentry *dentry)
  * reference to css->refcnt. In general, this refcnt is expected to goes down
  * to zero, soon.
  *
- * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex;
+ * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex;
  */
 DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq);
 
-static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp)
+static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp)
 {
-        if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
+        if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
                 wake_up_all(&cgroup_rmdir_waitq);
 }
 
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css)
+{
+        css_get(css);
+}
+
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
+{
+        cgroup_wakeup_rmdir_waiter(css->cgroup);
+        css_put(css);
+}
+
+
 static int rebind_subsystems(struct cgroupfs_root *root,
                               unsigned long final_bits)
 {
@@ -960,6 +973,7 @@ static void init_cgroup_housekeeping(struct cgroup *cgrp)
         INIT_LIST_HEAD(&cgrp->children);
         INIT_LIST_HEAD(&cgrp->css_sets);
         INIT_LIST_HEAD(&cgrp->release_list);
+        INIT_LIST_HEAD(&cgrp->pids_list);
         init_rwsem(&cgrp->pids_mutex);
 }
 static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1357,7 +1371,7 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
          * wake up rmdir() waiter. the rmdir should fail since the cgroup
          * is no longer empty.
          */
-        cgroup_wakeup_rmdir_waiters(cgrp);
+        cgroup_wakeup_rmdir_waiter(cgrp);
         return 0;
 }
 
@@ -2201,12 +2215,30 @@ err:
         return ret;
 }
 
+/*
+ * Cache pids for all threads in the same pid namespace that are
+ * opening the same "tasks" file.
+ */
+struct cgroup_pids {
+        /* The node in cgrp->pids_list */
+        struct list_head list;
+        /* The cgroup those pids belong to */
+        struct cgroup *cgrp;
+        /* The namepsace those pids belong to */
+        struct pid_namespace *ns;
+        /* Array of process ids in the cgroup */
+        pid_t *tasks_pids;
+        /* How many files are using the this tasks_pids array */
+        int use_count;
+        /* Length of the current tasks_pids array */
+        int length;
+};
+
 static int cmppid(const void *a, const void *b)
 {
         return *(pid_t *)a - *(pid_t *)b;
 }
 
-
 /*
  * seq_file methods for the "tasks" file. The seq_file position is the
  * next pid to display; the seq_file iterator is a pointer to the pid
@@ -2221,45 +2253,47 @@ static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
          * after a seek to the start). Use a binary-search to find the
          * next pid to display, if any
          */
-        struct cgroup *cgrp = s->private;
+        struct cgroup_pids *cp = s->private;
+        struct cgroup *cgrp = cp->cgrp;
         int index = 0, pid = *pos;
         int *iter;
 
         down_read(&cgrp->pids_mutex);
         if (pid) {
-                int end = cgrp->pids_length;
+                int end = cp->length;
 
                 while (index < end) {
                         int mid = (index + end) / 2;
-                        if (cgrp->tasks_pids[mid] == pid) {
+                        if (cp->tasks_pids[mid] == pid) {
                                 index = mid;
                                 break;
-                        } else if (cgrp->tasks_pids[mid] <= pid)
+                        } else if (cp->tasks_pids[mid] <= pid)
                                 index = mid + 1;
                         else
                                 end = mid;
                 }
         }
         /* If we're off the end of the array, we're done */
-        if (index >= cgrp->pids_length)
+        if (index >= cp->length)
                 return NULL;
         /* Update the abstract position to be the actual pid that we found */
-        iter = cgrp->tasks_pids + index;
+        iter = cp->tasks_pids + index;
         *pos = *iter;
         return iter;
 }
 
 static void cgroup_tasks_stop(struct seq_file *s, void *v)
 {
-        struct cgroup *cgrp = s->private;
+        struct cgroup_pids *cp = s->private;
+        struct cgroup *cgrp = cp->cgrp;
         up_read(&cgrp->pids_mutex);
 }
 
 static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
 {
-        struct cgroup *cgrp = s->private;
+        struct cgroup_pids *cp = s->private;
         int *p = v;
-        int *end = cgrp->tasks_pids + cgrp->pids_length;
+        int *end = cp->tasks_pids + cp->length;
 
         /*
          * Advance to the next pid in the array. If this goes off the
@@ -2286,26 +2320,33 @@ static struct seq_operations cgroup_tasks_seq_operations = {
         .show = cgroup_tasks_show,
 };
 
-static void release_cgroup_pid_array(struct cgroup *cgrp)
+static void release_cgroup_pid_array(struct cgroup_pids *cp)
 {
+        struct cgroup *cgrp = cp->cgrp;
+
         down_write(&cgrp->pids_mutex);
-        BUG_ON(!cgrp->pids_use_count);
-        if (!--cgrp->pids_use_count) {
-                kfree(cgrp->tasks_pids);
-                cgrp->tasks_pids = NULL;
-                cgrp->pids_length = 0;
+        BUG_ON(!cp->use_count);
+        if (!--cp->use_count) {
+                list_del(&cp->list);
+                put_pid_ns(cp->ns);
+                kfree(cp->tasks_pids);
+                kfree(cp);
         }
         up_write(&cgrp->pids_mutex);
 }
 
 static int cgroup_tasks_release(struct inode *inode, struct file *file)
 {
-        struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+        struct seq_file *seq;
+        struct cgroup_pids *cp;
 
         if (!(file->f_mode & FMODE_READ))
                 return 0;
 
-        release_cgroup_pid_array(cgrp);
+        seq = file->private_data;
+        cp = seq->private;
+
+        release_cgroup_pid_array(cp);
         return seq_release(inode, file);
 }
 
@@ -2324,6 +2365,8 @@ static struct file_operations cgroup_tasks_operations = {
 static int cgroup_tasks_open(struct inode *unused, struct file *file)
 {
         struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+        struct pid_namespace *ns = current->nsproxy->pid_ns;
+        struct cgroup_pids *cp;
         pid_t *pidarray;
         int npids;
         int retval;
@@ -2350,20 +2393,37 @@ static int cgroup_tasks_open(struct inode *unused, struct file *file)
          * array if necessary
          */
         down_write(&cgrp->pids_mutex);
-        kfree(cgrp->tasks_pids);
-        cgrp->tasks_pids = pidarray;
-        cgrp->pids_length = npids;
-        cgrp->pids_use_count++;
+
+        list_for_each_entry(cp, &cgrp->pids_list, list) {
+                if (ns == cp->ns)
+                        goto found;
+        }
+
+        cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+        if (!cp) {
+                up_write(&cgrp->pids_mutex);
+                kfree(pidarray);
+                return -ENOMEM;
+        }
+        cp->cgrp = cgrp;
+        cp->ns = ns;
+        get_pid_ns(ns);
+        list_add(&cp->list, &cgrp->pids_list);
+found:
+        kfree(cp->tasks_pids);
+        cp->tasks_pids = pidarray;
+        cp->length = npids;
+        cp->use_count++;
         up_write(&cgrp->pids_mutex);
 
         file->f_op = &cgroup_tasks_operations;
 
         retval = seq_open(file, &cgroup_tasks_seq_operations);
         if (retval) {
-                release_cgroup_pid_array(cgrp);
+                release_cgroup_pid_array(cp);
                 return retval;
         }
-        ((struct seq_file *)file->private_data)->private = cgrp;
+        ((struct seq_file *)file->private_data)->private = cp;
         return 0;
 }
 
@@ -2696,33 +2756,42 @@ again:
         mutex_unlock(&cgroup_mutex);
 
         /*
+         * In general, subsystem has no css->refcnt after pre_destroy(). But
+         * in racy cases, subsystem may have to get css->refcnt after
+         * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes
+         * make rmdir return -EBUSY too often. To avoid that, we use waitqueue
+         * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir
+         * and subsystem's reference count handling. Please see css_get/put
+         * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation.
+         */
+        set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
+
+        /*
          * Call pre_destroy handlers of subsys. Notify subsystems
          * that rmdir() request comes.
          */
         ret = cgroup_call_pre_destroy(cgrp);
-        if (ret)
+        if (ret) {
+                clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
                 return ret;
+        }
 
         mutex_lock(&cgroup_mutex);
         parent = cgrp->parent;
         if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) {
+                clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
                 mutex_unlock(&cgroup_mutex);
                 return -EBUSY;
         }
-        /*
-         * css_put/get is provided for subsys to grab refcnt to css. In typical
-         * case, subsystem has no reference after pre_destroy(). But, under
-         * hierarchy management, some *temporal* refcnt can be hold.
-         * To avoid returning -EBUSY to a user, waitqueue is used. If subsys
-         * is really busy, it should return -EBUSY at pre_destroy(). wake_up
-         * is called when css_put() is called and refcnt goes down to 0.
-         */
-        set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
         prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE);
-
         if (!cgroup_clear_css_refs(cgrp)) {
                 mutex_unlock(&cgroup_mutex);
-                schedule();
+                /*
+                 * Because someone may call cgroup_wakeup_rmdir_waiter() before
+                 * prepare_to_wait(), we need to check this flag.
+                 */
+                if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))
+                        schedule();
                 finish_wait(&cgroup_rmdir_waitq, &wait);
                 clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
                 if (signal_pending(current))
@@ -3294,7 +3363,7 @@ void __css_put(struct cgroup_subsys_state *css)
                         set_bit(CGRP_RELEASABLE, &cgrp->flags);
                         check_for_release(cgrp);
                 }
-                cgroup_wakeup_rmdir_waiters(cgrp);
+                cgroup_wakeup_rmdir_waiter(cgrp);
         }
         rcu_read_unlock();
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index bd2959228871..29b532e718f7 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -426,6 +426,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
         init_rwsem(&mm->mmap_sem);
         INIT_LIST_HEAD(&mm->mmlist);
         mm->flags = (current->mm) ? current->mm->flags : default_dump_filter;
+        mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0;
         mm->core_state = NULL;
         mm->nr_ptes = 0;
         set_mm_counter(mm, file_rss, 0);
@@ -1407,14 +1408,11 @@ long do_fork(unsigned long clone_flags,
                 if (clone_flags & CLONE_VFORK) {
                         p->vfork_done = &vfork;
                         init_completion(&vfork);
-                } else if (!(clone_flags & CLONE_VM)) {
-                        /*
-                         * vfork will do an exec which will call
-                         * set_task_comm()
-                         */
-                        perf_counter_fork(p);
                 }
 
+                if (!(clone_flags & CLONE_THREAD))
+                        perf_counter_fork(p);
+
                 audit_finish_fork(p);
                 tracehook_report_clone(regs, clone_flags, nr, p);
 
diff --git a/kernel/freezer.c b/kernel/freezer.c
index 2f4936cf7083..bd1d42b17cb2 100644
--- a/kernel/freezer.c
+++ b/kernel/freezer.c
@@ -44,12 +44,19 @@ void refrigerator(void)
         recalc_sigpending(); /* We sent fake signal, clean it up */
         spin_unlock_irq(&current->sighand->siglock);
 
+        /* prevent accounting of that task to load */
+        current->flags |= PF_FREEZING;
+
         for (;;) {
                 set_current_state(TASK_UNINTERRUPTIBLE);
                 if (!frozen(current))
                         break;
                 schedule();
         }
+
+        /* Remove the accounting blocker */
+        current->flags &= ~PF_FREEZING;
+
         pr_debug("%s left refrigerator\n", current->comm);
         __set_current_state(save);
 }
diff --git a/kernel/futex.c b/kernel/futex.c
index 794c862125fe..0672ff88f159 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -247,6 +247,7 @@ again:
         if (err < 0)
                 return err;
 
+        page = compound_head(page);
         lock_page(page);
         if (!page->mapping) {
                 unlock_page(page);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 9002958a96e7..49da79ab8486 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -191,6 +191,46 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer,
         }
 }
 
+
+/*
+ * Get the preferred target CPU for NOHZ
+ */
+static int hrtimer_get_target(int this_cpu, int pinned)
+{
+#ifdef CONFIG_NO_HZ
+        if (!pinned && get_sysctl_timer_migration() && idle_cpu(this_cpu)) {
+                int preferred_cpu = get_nohz_load_balancer();
+
+                if (preferred_cpu >= 0)
+                        return preferred_cpu;
+        }
+#endif
+        return this_cpu;
+}
+
+/*
+ * With HIGHRES=y we do not migrate the timer when it is expiring
+ * before the next event on the target cpu because we cannot reprogram
+ * the target cpu hardware and we would cause it to fire late.
+ *
+ * Called with cpu_base->lock of target cpu held.
+ */
+static int
+hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base)
+{
+#ifdef CONFIG_HIGH_RES_TIMERS
+        ktime_t expires;
+
+        if (!new_base->cpu_base->hres_active)
+                return 0;
+
+        expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset);
+        return expires.tv64 <= new_base->cpu_base->expires_next.tv64;
+#else
+        return 0;
+#endif
+}
+
 /*
  * Switch the timer base to the current CPU when possible.
  */
@@ -200,16 +240,8 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 {
         struct hrtimer_clock_base *new_base;
         struct hrtimer_cpu_base *new_cpu_base;
-        int cpu, preferred_cpu = -1;
-
-        cpu = smp_processor_id();
-#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
-        if (!pinned && get_sysctl_timer_migration() && idle_cpu(cpu)) {
-                preferred_cpu = get_nohz_load_balancer();
-                if (preferred_cpu >= 0)
-                        cpu = preferred_cpu;
-        }
-#endif
+        int this_cpu = smp_processor_id();
+        int cpu = hrtimer_get_target(this_cpu, pinned);
 
 again:
         new_cpu_base = &per_cpu(hrtimer_bases, cpu);
@@ -217,7 +249,7 @@ again:
 
         if (base != new_base) {
                 /*
-                 * We are trying to schedule the timer on the local CPU.
+                 * We are trying to move timer to new_base.
                  * However we can't change timer's base while it is running,
                  * so we keep it on the same CPU. No hassle vs. reprogramming
                  * the event source in the high resolution case. The softirq
@@ -233,38 +265,12 @@ again:
                 spin_unlock(&base->cpu_base->lock);
                 spin_lock(&new_base->cpu_base->lock);
 
-                /* Optimized away for NOHZ=n SMP=n */
-                if (cpu == preferred_cpu) {
-                        /* Calculate clock monotonic expiry time */
-#ifdef CONFIG_HIGH_RES_TIMERS
-                        ktime_t expires = ktime_sub(hrtimer_get_expires(timer),
-                                                        new_base->offset);
-#else
-                        ktime_t expires = hrtimer_get_expires(timer);
-#endif
-
-                        /*
-                         * Get the next event on target cpu from the
-                         * clock events layer.
-                         * This covers the highres=off nohz=on case as well.
-                         */
-                        ktime_t next = clockevents_get_next_event(cpu);
-
-                        ktime_t delta = ktime_sub(expires, next);
-
-                        /*
-                         * We do not migrate the timer when it is expiring
-                         * before the next event on the target cpu because
-                         * we cannot reprogram the target cpu hardware and
-                         * we would cause it to fire late.
-                         */
-                        if (delta.tv64 < 0) {
-                                cpu = smp_processor_id();
-                                spin_unlock(&new_base->cpu_base->lock);
-                                spin_lock(&base->cpu_base->lock);
-                                timer->base = base;
-                                goto again;
-                        }
+                if (cpu != this_cpu && hrtimer_check_target(timer, new_base)) {
+                        cpu = this_cpu;
+                        spin_unlock(&new_base->cpu_base->lock);
+                        spin_lock(&base->cpu_base->lock);
+                        timer->base = base;
+                        goto again;
                 }
                 timer->base = new_base;
         }
@@ -1276,14 +1282,22 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
         expires_next.tv64 = KTIME_MAX;
 
+        spin_lock(&cpu_base->lock);
+        /*
+         * We set expires_next to KTIME_MAX here with cpu_base->lock
+         * held to prevent that a timer is enqueued in our queue via
+         * the migration code. This does not affect enqueueing of
+         * timers which run their callback and need to be requeued on
+         * this CPU.
+         */
+        cpu_base->expires_next.tv64 = KTIME_MAX;
+
         base = cpu_base->clock_base;
 
         for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
                 ktime_t basenow;
                 struct rb_node *node;
 
-                spin_lock(&cpu_base->lock);
-
                 basenow = ktime_add(now, base->offset);
 
                 while ((node = base->first)) {
@@ -1316,11 +1330,15 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
                         __run_hrtimer(timer);
                 }
-                spin_unlock(&cpu_base->lock);
                 base++;
         }
 
+        /*
+         * Store the new expiry value so the migration code can verify
+         * against it.
+         */
         cpu_base->expires_next = expires_next;
+        spin_unlock(&cpu_base->lock);
 
         /* Reprogramming necessary ? */
         if (expires_next.tv64 != KTIME_MAX) {
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 73468253143b..e70ed5592eb9 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -42,8 +42,7 @@ static inline void unregister_handler_proc(unsigned int irq,
 
 extern int irq_select_affinity_usr(unsigned int irq);
 
-extern void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+extern void irq_set_thread_affinity(struct irq_desc *desc);
 
 /*
  * Debugging printout:
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 50da67672901..61c679db4687 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -80,14 +80,22 @@ int irq_can_set_affinity(unsigned int irq)
         return 1;
 }
 
-void
-irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
+/**
+ *      irq_set_thread_affinity - Notify irq threads to adjust affinity
+ *      @desc:          irq descriptor which has affitnity changed
+ *
+ *      We just set IRQTF_AFFINITY and delegate the affinity setting
+ *      to the interrupt thread itself. We can not call
+ *      set_cpus_allowed_ptr() here as we hold desc->lock and this
+ *      code can be called from hard interrupt context.
+ */
+void irq_set_thread_affinity(struct irq_desc *desc)
 {
         struct irqaction *action = desc->action;
 
         while (action) {
                 if (action->thread)
-                        set_cpus_allowed_ptr(action->thread, cpumask);
+                        set_bit(IRQTF_AFFINITY, &action->thread_flags);
                 action = action->next;
         }
 }
@@ -112,7 +120,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
         if (desc->status & IRQ_MOVE_PCNTXT) {
                 if (!desc->chip->set_affinity(irq, cpumask)) {
                         cpumask_copy(desc->affinity, cpumask);
-                        irq_set_thread_affinity(desc, cpumask);
+                        irq_set_thread_affinity(desc);
                 }
         }
         else {
@@ -122,7 +130,7 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 #else
         if (!desc->chip->set_affinity(irq, cpumask)) {
                 cpumask_copy(desc->affinity, cpumask);
-                irq_set_thread_affinity(desc, cpumask);
+                irq_set_thread_affinity(desc);
         }
 #endif
         desc->status |= IRQ_AFFINITY_SET;
@@ -176,7 +184,7 @@ int irq_select_affinity_usr(unsigned int irq)
         spin_lock_irqsave(&desc->lock, flags);
         ret = setup_affinity(irq, desc);
         if (!ret)
-                irq_set_thread_affinity(desc, desc->affinity);
+                irq_set_thread_affinity(desc);
         spin_unlock_irqrestore(&desc->lock, flags);
 
         return ret;
@@ -443,6 +451,39 @@ static int irq_wait_for_interrupt(struct irqaction *action)
         return -1;
 }
 
+#ifdef CONFIG_SMP
+/*
+ * Check whether we need to change the affinity of the interrupt thread.
+ */
+static void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
+{
+        cpumask_var_t mask;
+
+        if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
+                return;
+
+        /*
+         * In case we are out of memory we set IRQTF_AFFINITY again and
+         * try again next time
+         */
+        if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
+                set_bit(IRQTF_AFFINITY, &action->thread_flags);
+                return;
+        }
+
+        spin_lock_irq(&desc->lock);
+        cpumask_copy(mask, desc->affinity);
+        spin_unlock_irq(&desc->lock);
+
+        set_cpus_allowed_ptr(current, mask);
+        free_cpumask_var(mask);
+}
+#else
+static inline void
+irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
+#endif
+
 /*
  * Interrupt handler thread
  */
@@ -458,6 +499,8 @@ static int irq_thread(void *data)
 
         while (!irq_wait_for_interrupt(action)) {
 
+                irq_thread_check_affinity(desc, action);
+
                 atomic_inc(&desc->threads_active);
 
                 spin_lock_irq(&desc->lock);
diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c
index cfe767ca1545..fcb6c96f2627 100644
--- a/kernel/irq/migration.c
+++ b/kernel/irq/migration.c
@@ -45,7 +45,7 @@ void move_masked_irq(int irq)
                    < nr_cpu_ids))
                 if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
                         cpumask_copy(desc->affinity, desc->pending_mask);
-                        irq_set_thread_affinity(desc, desc->pending_mask);
+                        irq_set_thread_affinity(desc);
                 }
 
         cpumask_clear(desc->pending_mask);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ae1c35201cc8..f336e2107f98 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1228,7 +1228,7 @@ static int __init parse_crashkernel_mem(char 			*cmdline,
         } while (*cur++ == ',');
 
         if (*crash_size > 0) {
-                while (*cur != ' ' && *cur != '@')
+                while (*cur && *cur != ' ' && *cur != '@')
                         cur++;
                 if (*cur == '@') {
                         cur++;
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 16b5739c516a..0540948e29ab 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -694,7 +694,7 @@ int __kprobes register_kprobe(struct kprobe *p)
         p->addr = addr;
 
         preempt_disable();
-        if (!__kernel_text_address((unsigned long) p->addr) ||
+        if (!kernel_text_address((unsigned long) p->addr) ||
             in_kprobes_functions((unsigned long) p->addr)) {
                 preempt_enable();
                 return -EINVAL;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 9b1a7de26979..eb8751aa0418 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -180,10 +180,12 @@ EXPORT_SYMBOL(kthread_bind);
  * @k: thread created by kthread_create().
  *
  * Sets kthread_should_stop() for @k to return true, wakes it, and
- * waits for it to exit.  Your threadfn() must not call do_exit()
- * itself if you use this function!  This can also be called after
- * kthread_create() instead of calling wake_up_process(): the thread
- * will exit without calling threadfn().
+ * waits for it to exit. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will exit without
+ * calling threadfn().
+ *
+ * If threadfn() may call do_exit() itself, the caller must ensure
+ * task_struct can't go away.
  *
  * Returns the result of threadfn(), or %-EINTR if wake_up_process()
  * was never called.
diff --git a/kernel/module.c b/kernel/module.c
index 0a049837008e..fd1411403558 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1068,7 +1068,8 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs,
 {
         const unsigned long *crc;
 
-        if (!find_symbol("module_layout", NULL, &crc, true, false))
+        if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
+                         &crc, true, false))
                 BUG();
         return check_version(sechdrs, versindex, "module_layout", mod, crc);
 }
diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c
index a641eb753b8c..950931041954 100644
--- a/kernel/perf_counter.c
+++ b/kernel/perf_counter.c
@@ -146,6 +146,28 @@ static void put_ctx(struct perf_counter_context *ctx)
         }
 }
 
+static void unclone_ctx(struct perf_counter_context *ctx)
+{
+        if (ctx->parent_ctx) {
+                put_ctx(ctx->parent_ctx);
+                ctx->parent_ctx = NULL;
+        }
+}
+
+/*
+ * If we inherit counters we want to return the parent counter id
+ * to userspace.
+ */
+static u64 primary_counter_id(struct perf_counter *counter)
+{
+        u64 id = counter->id;
+
+        if (counter->parent)
+                id = counter->parent->id;
+
+        return id;
+}
+
 /*
  * Get the perf_counter_context for a task and lock it.
  * This has to cope with with the fact that until it is locked,
@@ -1288,7 +1310,6 @@ static void perf_counter_cpu_sched_in(struct perf_cpu_context *cpuctx, int cpu)
 #define MAX_INTERRUPTS (~0ULL)
 
 static void perf_log_throttle(struct perf_counter *counter, int enable);
-static void perf_log_period(struct perf_counter *counter, u64 period);
 
 static void perf_adjust_period(struct perf_counter *counter, u64 events)
 {
@@ -1307,8 +1328,6 @@ static void perf_adjust_period(struct perf_counter *counter, u64 events)
         if (!sample_period)
                 sample_period = 1;
 
-        perf_log_period(counter, sample_period);
-
         hwc->sample_period = sample_period;
 }
 
@@ -1463,10 +1482,8 @@ static void perf_counter_enable_on_exec(struct task_struct *task)
         /*
          * Unclone this context if we enabled any counter.
          */
-        if (enabled && ctx->parent_ctx) {
-                put_ctx(ctx->parent_ctx);
-                ctx->parent_ctx = NULL;
-        }
+        if (enabled)
+                unclone_ctx(ctx);
 
         spin_unlock(&ctx->lock);
 
@@ -1526,7 +1543,6 @@ __perf_counter_init_context(struct perf_counter_context *ctx,
 
 static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
 {
-        struct perf_counter_context *parent_ctx;
         struct perf_counter_context *ctx;
         struct perf_cpu_context *cpuctx;
         struct task_struct *task;
@@ -1586,11 +1602,7 @@ static struct perf_counter_context *find_get_context(pid_t pid, int cpu)
  retry:
         ctx = perf_lock_task_context(task, &flags);
         if (ctx) {
-                parent_ctx = ctx->parent_ctx;
-                if (parent_ctx) {
-                        put_ctx(parent_ctx);
-                        ctx->parent_ctx = NULL;         /* no longer a clone */
-                }
+                unclone_ctx(ctx);
                 spin_unlock_irqrestore(&ctx->lock, flags);
         }
 
@@ -1704,7 +1716,7 @@ perf_read_hw(struct perf_counter *counter, char __user *buf, size_t count)
                 values[n++] = counter->total_time_running +
                         atomic64_read(&counter->child_total_time_running);
         if (counter->attr.read_format & PERF_FORMAT_ID)
-                values[n++] = counter->id;
+                values[n++] = primary_counter_id(counter);
         mutex_unlock(&counter->child_mutex);
 
         if (count < n * sizeof(u64))
@@ -1811,8 +1823,6 @@ static int perf_counter_period(struct perf_counter *counter, u64 __user *arg)
 
                 counter->attr.sample_freq = value;
         } else {
-                perf_log_period(counter, value);
-
                 counter->attr.sample_period = value;
                 counter->hw.sample_period = value;
         }
@@ -2661,10 +2671,14 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
         if (sample_type & PERF_SAMPLE_ID)
                 header.size += sizeof(u64);
 
+        if (sample_type & PERF_SAMPLE_STREAM_ID)
+                header.size += sizeof(u64);
+
         if (sample_type & PERF_SAMPLE_CPU) {
                 header.size += sizeof(cpu_entry);
 
                 cpu_entry.cpu = raw_smp_processor_id();
+                cpu_entry.reserved = 0;
         }
 
         if (sample_type & PERF_SAMPLE_PERIOD)
@@ -2703,7 +2717,13 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
         if (sample_type & PERF_SAMPLE_ADDR)
                 perf_output_put(&handle, data->addr);
 
-        if (sample_type & PERF_SAMPLE_ID)
+        if (sample_type & PERF_SAMPLE_ID) {
+                u64 id = primary_counter_id(counter);
+
+                perf_output_put(&handle, id);
+        }
+
+        if (sample_type & PERF_SAMPLE_STREAM_ID)
                 perf_output_put(&handle, counter->id);
 
         if (sample_type & PERF_SAMPLE_CPU)
@@ -2726,7 +2746,7 @@ static void perf_counter_output(struct perf_counter *counter, int nmi,
                         if (sub != counter)
                                 sub->pmu->read(sub);
 
-                        group_entry.id = sub->id;
+                        group_entry.id = primary_counter_id(sub);
                         group_entry.counter = atomic64_read(&sub->count);
 
                         perf_output_put(&handle, group_entry);
@@ -2786,15 +2806,8 @@ perf_counter_read_event(struct perf_counter *counter,
         }
 
         if (counter->attr.read_format & PERF_FORMAT_ID) {
-                u64 id;
-
                 event.header.size += sizeof(u64);
-                if (counter->parent)
-                        id = counter->parent->id;
-                else
-                        id = counter->id;
-
-                event.format[i++] = id;
+                event.format[i++] = primary_counter_id(counter);
         }
 
         ret = perf_output_begin(&handle, counter, event.header.size, 0, 0);
@@ -2895,8 +2908,11 @@ void perf_counter_fork(struct task_struct *task)
                 .event  = {
                         .header = {
                                 .type = PERF_EVENT_FORK,
+                                .misc = 0,
                                 .size = sizeof(fork_event.event),
                         },
+                        /* .pid  */
+                        /* .ppid */
                 },
         };
 
@@ -2968,8 +2984,10 @@ static void perf_counter_comm_event(struct perf_comm_event *comm_event)
         struct perf_cpu_context *cpuctx;
         struct perf_counter_context *ctx;
         unsigned int size;
-        char *comm = comm_event->task->comm;
+        char comm[TASK_COMM_LEN];
 
+        memset(comm, 0, sizeof(comm));
+        strncpy(comm, comm_event->task->comm, sizeof(comm));
         size = ALIGN(strlen(comm)+1, sizeof(u64));
 
         comm_event->comm = comm;
@@ -3004,8 +3022,16 @@ void perf_counter_comm(struct task_struct *task)
 
         comm_event = (struct perf_comm_event){
                 .task   = task,
+                /* .comm      */
+                /* .comm_size */
                 .event  = {
-                        .header = { .type = PERF_EVENT_COMM, },
+                        .header = {
+                                .type = PERF_EVENT_COMM,
+                                .misc = 0,
+                                /* .size */
+                        },
+                        /* .pid */
+                        /* .tid */
                 },
         };
 
@@ -3088,8 +3114,15 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event)
         char *buf = NULL;
         const char *name;
 
+        memset(tmp, 0, sizeof(tmp));
+
         if (file) {
-                buf = kzalloc(PATH_MAX, GFP_KERNEL);
+                /*
+                 * d_path works from the end of the buffer backwards, so we
+                 * need to add enough zero bytes after the string to handle
+                 * the 64bit alignment we do later.
+                 */
+                buf = kzalloc(PATH_MAX + sizeof(u64), GFP_KERNEL);
                 if (!buf) {
                         name = strncpy(tmp, "//enomem", sizeof(tmp));
                         goto got_name;
@@ -3100,9 +3133,11 @@ static void perf_counter_mmap_event(struct perf_mmap_event *mmap_event)
                         goto got_name;
                 }
         } else {
-                name = arch_vma_name(mmap_event->vma);
-                if (name)
+                if (arch_vma_name(mmap_event->vma)) {
+                        name = strncpy(tmp, arch_vma_name(mmap_event->vma),
+                                       sizeof(tmp));
                         goto got_name;
+                }
 
                 if (!vma->vm_mm) {
                         name = strncpy(tmp, "[vdso]", sizeof(tmp));
@@ -3147,8 +3182,16 @@ void __perf_counter_mmap(struct vm_area_struct *vma)
 
         mmap_event = (struct perf_mmap_event){
                 .vma    = vma,
+                /* .file_name */
+                /* .file_size */
                 .event  = {
-                        .header = { .type = PERF_EVENT_MMAP, },
+                        .header = {
+                                .type = PERF_EVENT_MMAP,
+                                .misc = 0,
+                                /* .size */
+                        },
+                        /* .pid */
+                        /* .tid */
                         .start  = vma->vm_start,
                         .len    = vma->vm_end - vma->vm_start,
                         .pgoff  = vma->vm_pgoff,
@@ -3159,49 +3202,6 @@ void __perf_counter_mmap(struct vm_area_struct *vma)
 }
 
 /*
- * Log sample_period changes so that analyzing tools can re-normalize the
- * event flow.
- */
-
-struct freq_event {
-        struct perf_event_header        header;
-        u64                             time;
-        u64                             id;
-        u64                             period;
-};
-
-static void perf_log_period(struct perf_counter *counter, u64 period)
-{
-        struct perf_output_handle handle;
-        struct freq_event event;
-        int ret;
-
-        if (counter->hw.sample_period == period)
-                return;
-
-        if (counter->attr.sample_type & PERF_SAMPLE_PERIOD)
-                return;
-
-        event = (struct freq_event) {
-                .header = {
-                        .type = PERF_EVENT_PERIOD,
-                        .misc = 0,
-                        .size = sizeof(event),
-                },
-                .time = sched_clock(),
-                .id = counter->id,
-                .period = period,
-        };
-
-        ret = perf_output_begin(&handle, counter, sizeof(event), 1, 0);
-        if (ret)
-                return;
-
-        perf_output_put(&handle, event);
-        perf_output_end(&handle);
-}
-
-/*
  * IRQ throttle logging
  */
 
@@ -3214,16 +3214,21 @@ static void perf_log_throttle(struct perf_counter *counter, int enable)
                 struct perf_event_header        header;
                 u64                             time;
                 u64                             id;
+                u64                             stream_id;
         } throttle_event = {
                 .header = {
-                        .type = PERF_EVENT_THROTTLE + 1,
+                        .type = PERF_EVENT_THROTTLE,
                         .misc = 0,
                         .size = sizeof(throttle_event),
                 },
-                .time   = sched_clock(),
-                .id     = counter->id,
+                .time           = sched_clock(),
+                .id             = primary_counter_id(counter),
+                .stream_id      = counter->id,
         };
 
+        if (enable)
+                throttle_event.header.type = PERF_EVENT_UNTHROTTLE;
+
         ret = perf_output_begin(&handle, counter, sizeof(throttle_event), 1, 0);
         if (ret)
                 return;
@@ -3671,7 +3676,7 @@ static const struct pmu perf_ops_task_clock = {
 void perf_tpcounter_event(int event_id)
 {
         struct perf_sample_data data = {
-                .regs = get_irq_regs();
+                .regs = get_irq_regs(),
                 .addr = 0,
         };
 
@@ -3687,16 +3692,12 @@ extern void ftrace_profile_disable(int);
 
 static void tp_perf_counter_destroy(struct perf_counter *counter)
 {
-        ftrace_profile_disable(perf_event_id(&counter->attr));
+        ftrace_profile_disable(counter->attr.config);
 }
 
 static const struct pmu *tp_perf_counter_init(struct perf_counter *counter)
 {
-        int event_id = perf_event_id(&counter->attr);
-        int ret;
-
-        ret = ftrace_profile_enable(event_id);
-        if (ret)
+        if (ftrace_profile_enable(counter->attr.config))
                 return NULL;
 
         counter->destroy = tp_perf_counter_destroy;
@@ -4255,15 +4256,12 @@ void perf_counter_exit_task(struct task_struct *child)
          */
         spin_lock(&child_ctx->lock);
         child->perf_counter_ctxp = NULL;
-        if (child_ctx->parent_ctx) {
-                /*
-                 * This context is a clone; unclone it so it can't get
-                 * swapped to another process while we're removing all
-                 * the counters from it.
-                 */
-                put_ctx(child_ctx->parent_ctx);
-                child_ctx->parent_ctx = NULL;
-        }
+        /*
+         * If this context is a clone; unclone it so it can't get
+         * swapped to another process while we're removing all
+         * the counters from it.
+         */
+        unclone_ctx(child_ctx);
         spin_unlock(&child_ctx->lock);
         local_irq_restore(flags);
 
diff --git a/kernel/pid.c b/kernel/pid.c
index 5fa1db48d8b7..31310b5d3f50 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -36,7 +36,6 @@
 #include <linux/pid_namespace.h>
 #include <linux/init_task.h>
 #include <linux/syscalls.h>
-#include <linux/kmemleak.h>
 
 #define pid_hashfn(nr, ns)      \
         hash_long((unsigned long)nr + (unsigned long)ns, pidhash_shift)
@@ -513,12 +512,6 @@ void __init pidhash_init(void)
         pid_hash = alloc_bootmem(pidhash_size * sizeof(*(pid_hash)));
         if (!pid_hash)
                 panic("Could not alloc pidhash!\n");
-        /*
-         * pid_hash contains references to allocated struct pid objects and it
-         * must be scanned by kmemleak to avoid false positives.
-         */
-        kmemleak_alloc(pid_hash, pidhash_size * sizeof(*(pid_hash)), 0,
-                       GFP_KERNEL);
         for (i = 0; i < pidhash_size; i++)
                 INIT_HLIST_HEAD(&pid_hash[i]);
 }
diff --git a/kernel/power/user.c b/kernel/power/user.c
index ed97375daae9..bf0014d6a5f0 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -23,7 +23,6 @@
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/freezer.h>
-#include <linux/smp_lock.h>
 #include <scsi/scsi_scan.h>
 
 #include <asm/uaccess.h>
diff --git a/kernel/profile.c b/kernel/profile.c
index 69911b5745eb..419250ebec4d 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -117,11 +117,12 @@ int __ref profile_init(void)
 
         cpumask_copy(prof_cpu_mask, cpu_possible_mask);
 
-        prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+        prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
         if (prof_buffer)
                 return 0;
 
-        prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO);
+        prof_buffer = alloc_pages_exact(buffer_bytes,
+                                        GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
         if (prof_buffer)
                 return 0;
 
diff --git a/kernel/sched.c b/kernel/sched.c
index 01f55ada3598..1b59e265273b 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -493,6 +493,7 @@ struct rt_rq {
 #endif
 #ifdef CONFIG_SMP
         unsigned long rt_nr_migratory;
+        unsigned long rt_nr_total;
         int overloaded;
         struct plist_head pushable_tasks;
 #endif
@@ -2571,15 +2572,37 @@ static void __sched_fork(struct task_struct *p)
         p->se.avg_wakeup                = sysctl_sched_wakeup_granularity;
 
 #ifdef CONFIG_SCHEDSTATS
-        p->se.wait_start                = 0;
-        p->se.sum_sleep_runtime         = 0;
-        p->se.sleep_start               = 0;
-        p->se.block_start               = 0;
-        p->se.sleep_max                 = 0;
-        p->se.block_max                 = 0;
-        p->se.exec_max                  = 0;
-        p->se.slice_max                 = 0;
-        p->se.wait_max                  = 0;
+        p->se.wait_start                        = 0;
+        p->se.wait_max                          = 0;
+        p->se.wait_count                        = 0;
+        p->se.wait_sum                          = 0;
+
+        p->se.sleep_start                       = 0;
+        p->se.sleep_max                         = 0;
+        p->se.sum_sleep_runtime                 = 0;
+
+        p->se.block_start                       = 0;
+        p->se.block_max                         = 0;
+        p->se.exec_max                          = 0;
+        p->se.slice_max                         = 0;
+
+        p->se.nr_migrations_cold                = 0;
+        p->se.nr_failed_migrations_affine       = 0;
+        p->se.nr_failed_migrations_running      = 0;
+        p->se.nr_failed_migrations_hot          = 0;
+        p->se.nr_forced_migrations              = 0;
+        p->se.nr_forced2_migrations             = 0;
+
+        p->se.nr_wakeups                        = 0;
+        p->se.nr_wakeups_sync                   = 0;
+        p->se.nr_wakeups_migrate                = 0;
+        p->se.nr_wakeups_local                  = 0;
+        p->se.nr_wakeups_remote                 = 0;
+        p->se.nr_wakeups_affine                 = 0;
+        p->se.nr_wakeups_affine_attempts        = 0;
+        p->se.nr_wakeups_passive                = 0;
+        p->se.nr_wakeups_idle                   = 0;
+
 #endif
 
         INIT_LIST_HEAD(&p->rt.run_list);
@@ -7266,6 +7289,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu)
 static void calc_global_load_remove(struct rq *rq)
 {
         atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+        rq->calc_load_active = 0;
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -7492,6 +7516,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
                 task_rq_unlock(rq, &flags);
                 get_task_struct(p);
                 cpu_rq(cpu)->migration_thread = p;
+                rq->calc_load_update = calc_load_update;
                 break;
 
         case CPU_ONLINE:
@@ -7502,8 +7527,6 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
                 /* Update our root-domain */
                 rq = cpu_rq(cpu);
                 spin_lock_irqsave(&rq->lock, flags);
-                rq->calc_load_update = calc_load_update;
-                rq->calc_load_active = 0;
                 if (rq->rd) {
                         BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
 
@@ -9074,7 +9097,7 @@ static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq)
 #ifdef CONFIG_SMP
         rt_rq->rt_nr_migratory = 0;
         rt_rq->overloaded = 0;
-        plist_head_init(&rq->rt.pushable_tasks, &rq->lock);
+        plist_head_init(&rt_rq->pushable_tasks, &rq->lock);
 #endif
 
         rt_rq->rt_time = 0;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ba7fd6e9556f..9ffb2b2ceba4 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -266,6 +266,12 @@ static inline u64 min_vruntime(u64 min_vruntime, u64 vruntime)
         return min_vruntime;
 }
 
+static inline int entity_before(struct sched_entity *a,
+                                struct sched_entity *b)
+{
+        return (s64)(a->vruntime - b->vruntime) < 0;
+}
+
 static inline s64 entity_key(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
         return se->vruntime - cfs_rq->min_vruntime;
@@ -687,7 +693,8 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
                          * all of which have the same weight.
                          */
                         if (sched_feat(NORMALIZED_SLEEPER) &&
-                                        task_of(se)->policy != SCHED_IDLE)
+                                        (!entity_is_task(se) ||
+                                         task_of(se)->policy != SCHED_IDLE))
                                 thresh = calc_delta_fair(thresh, se);
 
                         vruntime -= thresh;
@@ -1016,7 +1023,7 @@ static void yield_task_fair(struct rq *rq)
         /*
          * Already in the rightmost position?
          */
-        if (unlikely(!rightmost || rightmost->vruntime < se->vruntime))
+        if (unlikely(!rightmost || entity_before(rightmost, se)))
                 return;
 
         /*
@@ -1712,7 +1719,7 @@ static void task_new_fair(struct rq *rq, struct task_struct *p)
 
         /* 'curr' will be NULL if the child belongs to a different group */
         if (sysctl_sched_child_runs_first && this_cpu == task_cpu(p) &&
-                        curr && curr->vruntime < se->vruntime) {
+                        curr && entity_before(curr, se)) {
                 /*
                  * Upon rescheduling, sched_class::put_prev_task() will place
                  * 'current' within the tree based on its new key value.
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 9bf0d2a73045..3918e01994e0 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -10,6 +10,8 @@ static inline struct task_struct *rt_task_of(struct sched_rt_entity *rt_se)
 
 #ifdef CONFIG_RT_GROUP_SCHED
 
+#define rt_entity_is_task(rt_se) (!(rt_se)->my_q)
+
 static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
 {
         return rt_rq->rq;
@@ -22,6 +24,8 @@ static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
 
 #else /* CONFIG_RT_GROUP_SCHED */
 
+#define rt_entity_is_task(rt_se) (1)
+
 static inline struct rq *rq_of_rt_rq(struct rt_rq *rt_rq)
 {
         return container_of(rt_rq, struct rq, rt);
@@ -73,7 +77,7 @@ static inline void rt_clear_overload(struct rq *rq)
 
 static void update_rt_migration(struct rt_rq *rt_rq)
 {
-        if (rt_rq->rt_nr_migratory && (rt_rq->rt_nr_running > 1)) {
+        if (rt_rq->rt_nr_migratory && rt_rq->rt_nr_total > 1) {
                 if (!rt_rq->overloaded) {
                         rt_set_overload(rq_of_rt_rq(rt_rq));
                         rt_rq->overloaded = 1;
@@ -86,6 +90,12 @@ static void update_rt_migration(struct rt_rq *rt_rq)
 
 static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
+        if (!rt_entity_is_task(rt_se))
+                return;
+
+        rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+        rt_rq->rt_nr_total++;
         if (rt_se->nr_cpus_allowed > 1)
                 rt_rq->rt_nr_migratory++;
 
@@ -94,6 +104,12 @@ static void inc_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 
 static void dec_rt_migration(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq)
 {
+        if (!rt_entity_is_task(rt_se))
+                return;
+
+        rt_rq = &rq_of_rt_rq(rt_rq)->rt;
+
+        rt_rq->rt_nr_total--;
         if (rt_se->nr_cpus_allowed > 1)
                 rt_rq->rt_nr_migratory--;
 
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 3a94905fa5d2..eb5e131a0485 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -345,7 +345,9 @@ void open_softirq(int nr, void (*action)(struct softirq_action *))
         softirq_vec[nr].action = action;
 }
 
-/* Tasklets */
+/*
+ * Tasklets
+ */
 struct tasklet_head
 {
         struct tasklet_struct *head;
@@ -493,6 +495,66 @@ void tasklet_kill(struct tasklet_struct *t)
 
 EXPORT_SYMBOL(tasklet_kill);
 
+/*
+ * tasklet_hrtimer
+ */
+
+/*
+ * The trampoline is called when the hrtimer expires. If this is
+ * called from the hrtimer interrupt then we schedule the tasklet as
+ * the timer callback function expects to run in softirq context. If
+ * it's called in softirq context anyway (i.e. high resolution timers
+ * disabled) then the hrtimer callback is called right away.
+ */
+static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
+{
+        struct tasklet_hrtimer *ttimer =
+                container_of(timer, struct tasklet_hrtimer, timer);
+
+        if (hrtimer_is_hres_active(timer)) {
+                tasklet_hi_schedule(&ttimer->tasklet);
+                return HRTIMER_NORESTART;
+        }
+        return ttimer->function(timer);
+}
+
+/*
+ * Helper function which calls the hrtimer callback from
+ * tasklet/softirq context
+ */
+static void __tasklet_hrtimer_trampoline(unsigned long data)
+{
+        struct tasklet_hrtimer *ttimer = (void *)data;
+        enum hrtimer_restart restart;
+
+        restart = ttimer->function(&ttimer->timer);
+        if (restart != HRTIMER_NORESTART)
+                hrtimer_restart(&ttimer->timer);
+}
+
+/**
+ * tasklet_hrtimer_init - Init a tasklet/hrtimer combo for softirq callbacks
+ * @ttimer:      tasklet_hrtimer which is initialized
+ * @function:    hrtimer callback funtion which gets called from softirq context
+ * @which_clock: clock id (CLOCK_MONOTONIC/CLOCK_REALTIME)
+ * @mode:        hrtimer mode (HRTIMER_MODE_ABS/HRTIMER_MODE_REL)
+ */
+void tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer,
+                          enum hrtimer_restart (*function)(struct hrtimer *),
+                          clockid_t which_clock, enum hrtimer_mode mode)
+{
+        hrtimer_init(&ttimer->timer, which_clock, mode);
+        ttimer->timer.function = __hrtimer_tasklet_trampoline;
+        tasklet_init(&ttimer->tasklet, __tasklet_hrtimer_trampoline,
+                     (unsigned long)ttimer);
+        ttimer->function = function;
+}
+EXPORT_SYMBOL_GPL(tasklet_hrtimer_init);
+
+/*
+ * Remote softirq bits
+ */
+
 DEFINE_PER_CPU(struct list_head [NR_SOFTIRQS], softirq_work_list);
 EXPORT_PER_CPU_SYMBOL(softirq_work_list);
 
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1ad6dd461119..a6dcd67b041d 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -254,15 +254,4 @@ void clockevents_notify(unsigned long reason, void *arg)
         spin_unlock(&clockevents_lock);
 }
 EXPORT_SYMBOL_GPL(clockevents_notify);
-
-ktime_t clockevents_get_next_event(int cpu)
-{
-        struct tick_device *td;
-        struct clock_event_device *dev;
-
-        td = &per_cpu(tick_cpu_device, cpu);
-        dev = td->evtdev;
-
-        return dev->next_event;
-}
 #endif
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 592bf584d1d2..7466cb811251 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -513,7 +513,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
          * Check to make sure we don't switch to a non-highres capable
          * clocksource if the tick code is in oneshot mode (highres or nohz)
          */
-        if (tick_oneshot_mode_active() &&
+        if (tick_oneshot_mode_active() && ovr &&
             !(ovr->flags & CLOCK_SOURCE_VALID_FOR_HRES)) {
                 printk(KERN_WARNING "%s clocksource is not HRT compatible. "
                         "Cannot switch while in HRT/NOHZ mode\n", ovr->name);
diff --git a/kernel/timer.c b/kernel/timer.c
index 0b36b9e5cc8b..a7f07d5a6241 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -714,7 +714,7 @@ int mod_timer(struct timer_list *timer, unsigned long expires)
          * networking code - if the timer is re-modified
          * to be the same thing then just return:
          */
-        if (timer->expires == expires && timer_pending(timer))
+        if (timer_pending(timer) && timer->expires == expires)
                 return 1;
 
         return __mod_timer(timer, expires, false, TIMER_NOT_PINNED);
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 39af8af6fc30..1090b0aed9ba 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/debugfs.h>
+#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index bce9e01a29c8..1f3ec2afa511 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -768,7 +768,7 @@ static struct tracer_stat function_stats __initdata = {
         .stat_show      = function_stat_show
 };
 
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
 {
         struct ftrace_profile_stat *stat;
         struct dentry *entry;
@@ -786,7 +786,6 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer)
                          * The files created are permanent, if something happens
                          * we still do not free memory.
                          */
-                        kfree(stat);
                         WARN(1,
                              "Could not allocate stat file for cpu %d\n",
                              cpu);
@@ -813,7 +812,7 @@ static void ftrace_profile_debugfs(struct dentry *d_tracer)
 }
 
 #else /* CONFIG_FUNCTION_PROFILER */
-static void ftrace_profile_debugfs(struct dentry *d_tracer)
+static __init void ftrace_profile_debugfs(struct dentry *d_tracer)
 {
 }
 #endif /* CONFIG_FUNCTION_PROFILER */
@@ -2597,6 +2596,14 @@ ftrace_graph_open(struct inode *inode, struct file *file)
 }
 
 static int
+ftrace_graph_release(struct inode *inode, struct file *file)
+{
+        if (file->f_mode & FMODE_READ)
+                seq_release(inode, file);
+        return 0;
+}
+
+static int
 ftrace_set_func(unsigned long *array, int *idx, char *buffer)
 {
         struct dyn_ftrace *rec;
@@ -2725,9 +2732,10 @@ ftrace_graph_write(struct file *file, const char __user *ubuf,
 }
 
 static const struct file_operations ftrace_graph_fops = {
-        .open = ftrace_graph_open,
-        .read = seq_read,
-        .write = ftrace_graph_write,
+        .open           = ftrace_graph_open,
+        .read           = seq_read,
+        .write          = ftrace_graph_write,
+        .release        = ftrace_graph_release,
 };
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 3aa0a0dfdfa8..8bc8d8afea6a 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,6 +17,7 @@
 #include <linux/writeback.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
+#include <linux/smp_lock.h>
 #include <linux/notifier.h>
 #include <linux/irqflags.h>
 #include <linux/debugfs.h>
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index 7402144bff21..75ef000613c3 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -363,7 +363,7 @@ ftrace_trace_onoff_callback(char *glob, char *cmd, char *param, int enable)
  out_reg:
         ret = register_ftrace_function_probe(glob, ops, count);
 
-        return ret;
+        return ret < 0 ? ret : 0;
 }
 
 static struct ftrace_func_command ftrace_traceon_cmd = {
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index e644af910124..6a2a9d484cd6 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -301,17 +301,14 @@ static const struct seq_operations stack_trace_seq_ops = {
 
 static int stack_trace_open(struct inode *inode, struct file *file)
 {
-        int ret;
-
-        ret = seq_open(file, &stack_trace_seq_ops);
-
-        return ret;
+        return seq_open(file, &stack_trace_seq_ops);
 }
 
 static const struct file_operations stack_trace_fops = {
         .open           = stack_trace_open,
         .read           = seq_read,
         .llseek         = seq_lseek,
+        .release        = seq_release,
 };
 
 int
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index e66f5e493342..aea321c82fa0 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -73,7 +73,7 @@ static struct rb_node *release_next(struct rb_node *node)
         }
 }
 
-static void reset_stat_session(struct stat_session *session)
+static void __reset_stat_session(struct stat_session *session)
 {
         struct rb_node *node = session->stat_root.rb_node;
 
@@ -83,10 +83,17 @@ static void reset_stat_session(struct stat_session *session)
         session->stat_root = RB_ROOT;
 }
 
+static void reset_stat_session(struct stat_session *session)
+{
+        mutex_lock(&session->stat_mutex);
+        __reset_stat_session(session);
+        mutex_unlock(&session->stat_mutex);
+}
+
 static void destroy_session(struct stat_session *session)
 {
         debugfs_remove(session->file);
-        reset_stat_session(session);
+        __reset_stat_session(session);
         mutex_destroy(&session->stat_mutex);
         kfree(session);
 }
@@ -150,7 +157,7 @@ static int stat_seq_init(struct stat_session *session)
         int i;
 
         mutex_lock(&session->stat_mutex);
-        reset_stat_session(session);
+        __reset_stat_session(session);
 
         if (!ts->stat_cmp)
                 ts->stat_cmp = dummy_cmp;
@@ -183,7 +190,7 @@ exit:
         return ret;
 
 exit_free_rbtree:
-        reset_stat_session(session);
+        __reset_stat_session(session);
         mutex_unlock(&session->stat_mutex);
         return ret;
 }
@@ -250,16 +257,21 @@ static const struct seq_operations trace_stat_seq_ops = {
 static int tracing_stat_open(struct inode *inode, struct file *file)
 {
         int ret;
-
+        struct seq_file *m;
         struct stat_session *session = inode->i_private;
 
+        ret = stat_seq_init(session);
+        if (ret)
+                return ret;
+
         ret = seq_open(file, &trace_stat_seq_ops);
-        if (!ret) {
-                struct seq_file *m = file->private_data;
-                m->private = session;
-                ret = stat_seq_init(session);
+        if (ret) {
+                reset_stat_session(session);
+                return ret;
         }
 
+        m = file->private_data;
+        m->private = session;
         return ret;
 }
 
@@ -270,11 +282,9 @@ static int tracing_stat_release(struct inode *i, struct file *f)
 {
         struct stat_session *session = i->i_private;
 
-        mutex_lock(&session->stat_mutex);
         reset_stat_session(session);
-        mutex_unlock(&session->stat_mutex);
 
-        return 0;
+        return seq_release(i, f);
 }
 
 static const struct file_operations tracing_stat_fops = {
diff --git a/lib/Makefile b/lib/Makefile
index b6d1857bbf08..2e78277eff9d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
          idr.o int_sqrt.o extable.o prio_tree.o \
          sha1.o irq_regs.o reciprocal_div.o argv_split.o \
          proportions.o prio_heap.o ratelimit.o show_mem.o \
-         is_single_threaded.o plist.o decompress.o
+         is_single_threaded.o plist.o decompress.o flex_array.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/atomic64.c b/lib/atomic64.c
index c5e725562416..8bee16ec7524 100644
--- a/lib/atomic64.c
+++ b/lib/atomic64.c
@@ -13,6 +13,7 @@
 #include <linux/cache.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <asm/atomic.h>
 
 /*
@@ -52,6 +53,7 @@ long long atomic64_read(const atomic64_t *v)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_read);
 
 void atomic64_set(atomic64_t *v, long long i)
 {
@@ -62,6 +64,7 @@ void atomic64_set(atomic64_t *v, long long i)
         v->counter = i;
         spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_set);
 
 void atomic64_add(long long a, atomic64_t *v)
 {
@@ -72,6 +75,7 @@ void atomic64_add(long long a, atomic64_t *v)
         v->counter += a;
         spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_add);
 
 long long atomic64_add_return(long long a, atomic64_t *v)
 {
@@ -84,6 +88,7 @@ long long atomic64_add_return(long long a, atomic64_t *v)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_add_return);
 
 void atomic64_sub(long long a, atomic64_t *v)
 {
@@ -94,6 +99,7 @@ void atomic64_sub(long long a, atomic64_t *v)
         v->counter -= a;
         spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_sub);
 
 long long atomic64_sub_return(long long a, atomic64_t *v)
 {
@@ -106,6 +112,7 @@ long long atomic64_sub_return(long long a, atomic64_t *v)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_sub_return);
 
 long long atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -120,6 +127,7 @@ long long atomic64_dec_if_positive(atomic64_t *v)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_dec_if_positive);
 
 long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
 {
@@ -134,6 +142,7 @@ long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_cmpxchg);
 
 long long atomic64_xchg(atomic64_t *v, long long new)
 {
@@ -147,6 +156,7 @@ long long atomic64_xchg(atomic64_t *v, long long new)
         spin_unlock_irqrestore(lock, flags);
         return val;
 }
+EXPORT_SYMBOL(atomic64_xchg);
 
 int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
@@ -162,6 +172,7 @@ int atomic64_add_unless(atomic64_t *v, long long a, long long u)
         spin_unlock_irqrestore(lock, flags);
         return ret;
 }
+EXPORT_SYMBOL(atomic64_add_unless);
 
 static int init_atomic64_lock(void)
 {
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 833139ce1e22..e22c148e4b7f 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -164,7 +164,7 @@ static void ddebug_change(const struct ddebug_query *query,
 
                         if (!newflags)
                                 dt->num_enabled--;
-                        else if (!dp-flags)
+                        else if (!dp->flags)
                                 dt->num_enabled++;
                         dp->flags = newflags;
                         if (newflags) {
diff --git a/lib/flex_array.c b/lib/flex_array.c
new file mode 100644
index 000000000000..0e7894ce8882
--- /dev/null
+++ b/lib/flex_array.c
@@ -0,0 +1,269 @@
+/*
+ * Flexible array managed in PAGE_SIZE parts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Dave Hansen <dave@linux.vnet.ibm.com>
+ */
+
+#include <linux/flex_array.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+struct flex_array_part {
+        char elements[FLEX_ARRAY_PART_SIZE];
+};
+
+static inline int __elements_per_part(int element_size)
+{
+        return FLEX_ARRAY_PART_SIZE / element_size;
+}
+
+static inline int bytes_left_in_base(void)
+{
+        int element_offset = offsetof(struct flex_array, parts);
+        int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset;
+        return bytes_left;
+}
+
+static inline int nr_base_part_ptrs(void)
+{
+        return bytes_left_in_base() / sizeof(struct flex_array_part *);
+}
+
+/*
+ * If a user requests an allocation which is small
+ * enough, we may simply use the space in the
+ * flex_array->parts[] array to store the user
+ * data.
+ */
+static inline int elements_fit_in_base(struct flex_array *fa)
+{
+        int data_size = fa->element_size * fa->total_nr_elements;
+        if (data_size <= bytes_left_in_base())
+                return 1;
+        return 0;
+}
+
+/**
+ * flex_array_alloc - allocate a new flexible array
+ * @element_size:       the size of individual elements in the array
+ * @total:              total number of elements that this should hold
+ *
+ * Note: all locking must be provided by the caller.
+ *
+ * @total is used to size internal structures.  If the user ever
+ * accesses any array indexes >=@total, it will produce errors.
+ *
+ * The maximum number of elements is defined as: the number of
+ * elements that can be stored in a page times the number of
+ * page pointers that we can fit in the base structure or (using
+ * integer math):
+ *
+ *      (PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
+ *
+ * Here's a table showing example capacities.  Note that the maximum
+ * index that the get/put() functions is just nr_objects-1.   This
+ * basically means that you get 4MB of storage on 32-bit and 2MB on
+ * 64-bit.
+ *
+ *
+ * Element size | Objects | Objects |
+ * PAGE_SIZE=4k |  32-bit |  64-bit |
+ * ---------------------------------|
+ *      1 bytes | 4186112 | 2093056 |
+ *      2 bytes | 2093056 | 1046528 |
+ *      3 bytes | 1395030 |  697515 |
+ *      4 bytes | 1046528 |  523264 |
+ *     32 bytes |  130816 |   65408 |
+ *     33 bytes |  126728 |   63364 |
+ *   2048 bytes |    2044 |    1022 |
+ *   2049 bytes |    1022 |     511 |
+ *       void * | 1046528 |  261632 |
+ *
+ * Since 64-bit pointers are twice the size, we lose half the
+ * capacity in the base structure.  Also note that no effort is made
+ * to efficiently pack objects across page boundaries.
+ */
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags)
+{
+        struct flex_array *ret;
+        int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
+
+        /* max_size will end up 0 if element_size > PAGE_SIZE */
+        if (total > max_size)
+                return NULL;
+        ret = kzalloc(sizeof(struct flex_array), flags);
+        if (!ret)
+                return NULL;
+        ret->element_size = element_size;
+        ret->total_nr_elements = total;
+        return ret;
+}
+
+static int fa_element_to_part_nr(struct flex_array *fa, int element_nr)
+{
+        return element_nr / __elements_per_part(fa->element_size);
+}
+
+/**
+ * flex_array_free_parts - just free the second-level pages
+ * @src:        address of data to copy into the array
+ * @element_nr: index of the position in which to insert
+ *              the new element.
+ *
+ * This is to be used in cases where the base 'struct flex_array'
+ * has been statically allocated and should not be free.
+ */
+void flex_array_free_parts(struct flex_array *fa)
+{
+        int part_nr;
+        int max_part = nr_base_part_ptrs();
+
+        if (elements_fit_in_base(fa))
+                return;
+        for (part_nr = 0; part_nr < max_part; part_nr++)
+                kfree(fa->parts[part_nr]);
+}
+
+void flex_array_free(struct flex_array *fa)
+{
+        flex_array_free_parts(fa);
+        kfree(fa);
+}
+
+static int fa_index_inside_part(struct flex_array *fa, int element_nr)
+{
+        return element_nr % __elements_per_part(fa->element_size);
+}
+
+static int index_inside_part(struct flex_array *fa, int element_nr)
+{
+        int part_offset = fa_index_inside_part(fa, element_nr);
+        return part_offset * fa->element_size;
+}
+
+static struct flex_array_part *
+__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
+{
+        struct flex_array_part *part = fa->parts[part_nr];
+        if (!part) {
+                /*
+                 * This leaves the part pages uninitialized
+                 * and with potentially random data, just
+                 * as if the user had kmalloc()'d the whole.
+                 * __GFP_ZERO can be used to zero it.
+                 */
+                part = kmalloc(FLEX_ARRAY_PART_SIZE, flags);
+                if (!part)
+                        return NULL;
+                fa->parts[part_nr] = part;
+        }
+        return part;
+}
+
+/**
+ * flex_array_put - copy data into the array at @element_nr
+ * @src:        address of data to copy into the array
+ * @element_nr: index of the position in which to insert
+ *              the new element.
+ *
+ * Note that this *copies* the contents of @src into
+ * the array.  If you are trying to store an array of
+ * pointers, make sure to pass in &ptr instead of ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags)
+{
+        int part_nr = fa_element_to_part_nr(fa, element_nr);
+        struct flex_array_part *part;
+        void *dst;
+
+        if (element_nr >= fa->total_nr_elements)
+                return -ENOSPC;
+        if (elements_fit_in_base(fa))
+                part = (struct flex_array_part *)&fa->parts[0];
+        else
+                part = __fa_get_part(fa, part_nr, flags);
+        if (!part)
+                return -ENOMEM;
+        dst = &part->elements[index_inside_part(fa, element_nr)];
+        memcpy(dst, src, fa->element_size);
+        return 0;
+}
+
+/**
+ * flex_array_prealloc - guarantee that array space exists
+ * @start:      index of first array element for which space is allocated
+ * @end:        index of last (inclusive) element for which space is allocated
+ *
+ * This will guarantee that no future calls to flex_array_put()
+ * will allocate memory.  It can be used if you are expecting to
+ * be holding a lock or in some atomic context while writing
+ * data into the array.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags)
+{
+        int start_part;
+        int end_part;
+        int part_nr;
+        struct flex_array_part *part;
+
+        if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+                return -ENOSPC;
+        if (elements_fit_in_base(fa))
+                return 0;
+        start_part = fa_element_to_part_nr(fa, start);
+        end_part = fa_element_to_part_nr(fa, end);
+        for (part_nr = start_part; part_nr <= end_part; part_nr++) {
+                part = __fa_get_part(fa, part_nr, flags);
+                if (!part)
+                        return -ENOMEM;
+        }
+        return 0;
+}
+
+/**
+ * flex_array_get - pull data back out of the array
+ * @element_nr: index of the element to fetch from the array
+ *
+ * Returns a pointer to the data at index @element_nr.  Note
+ * that this is a copy of the data that was passed in.  If you
+ * are using this to store pointers, you'll get back &ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+void *flex_array_get(struct flex_array *fa, int element_nr)
+{
+        int part_nr = fa_element_to_part_nr(fa, element_nr);
+        struct flex_array_part *part;
+        int index;
+
+        if (element_nr >= fa->total_nr_elements)
+                return NULL;
+        if (!fa->parts[part_nr])
+                return NULL;
+        if (elements_fit_in_base(fa))
+                part = (struct flex_array_part *)&fa->parts[0];
+        else
+                part = fa->parts[part_nr];
+        index = index_inside_part(fa, element_nr);
+        return &part->elements[index_inside_part(fa, element_nr)];
+}
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a295e404e908..0d475d8167bf 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -314,6 +314,7 @@ void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
         miter->__sg = sgl;
         miter->__nents = nents;
         miter->__offset = 0;
+        WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG)));
         miter->__flags = flags;
 }
 EXPORT_SYMBOL(sg_miter_start);
@@ -394,6 +395,9 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
         if (miter->addr) {
                 miter->__offset += miter->consumed;
 
+                if (miter->__flags & SG_MITER_TO_SG)
+                        flush_kernel_dcache_page(miter->page);
+
                 if (miter->__flags & SG_MITER_ATOMIC) {
                         WARN_ON(!irqs_disabled());
                         kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
@@ -426,8 +430,14 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
         unsigned int offset = 0;
         struct sg_mapping_iter miter;
         unsigned long flags;
+        unsigned int sg_flags = SG_MITER_ATOMIC;
+
+        if (to_buffer)
+                sg_flags |= SG_MITER_FROM_SG;
+        else
+                sg_flags |= SG_MITER_TO_SG;
 
-        sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+        sg_miter_start(&miter, sgl, nents, sg_flags);
 
         local_irq_save(flags);
 
@@ -438,10 +448,8 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
                 if (to_buffer)
                         memcpy(buf + offset, miter.addr, len);
-                else {
+                else
                         memcpy(miter.addr, buf + offset, len);
-                        flush_kernel_dcache_page(miter.page);
-                }
 
                 offset += len;
         }
diff --git a/mm/bootmem.c b/mm/bootmem.c
index d2a9ce952768..701740c9e81b 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -12,6 +12,7 @@
 #include <linux/pfn.h>
 #include <linux/bootmem.h>
 #include <linux/module.h>
+#include <linux/kmemleak.h>
 
 #include <asm/bug.h>
 #include <asm/io.h>
@@ -335,6 +336,8 @@ void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 {
         unsigned long start, end;
 
+        kmemleak_free_part(__va(physaddr), size);
+
         start = PFN_UP(physaddr);
         end = PFN_DOWN(physaddr + size);
 
@@ -354,6 +357,8 @@ void __init free_bootmem(unsigned long addr, unsigned long size)
 {
         unsigned long start, end;
 
+        kmemleak_free_part(__va(addr), size);
+
         start = PFN_UP(addr);
         end = PFN_DOWN(addr + size);
 
@@ -516,6 +521,7 @@ find_block:
                 region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) +
                                 start_off);
                 memset(region, 0, size);
+                kmemleak_alloc(region, size, 1, 0);
                 return region;
         }
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d0351e31f474..cafdcee154e8 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2370,7 +2370,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed)
         long chg = region_truncate(&inode->i_mapping->private_list, offset);
 
         spin_lock(&inode->i_lock);
-        inode->i_blocks -= blocks_per_huge_page(h);
+        inode->i_blocks -= (blocks_per_huge_page(h) * freed);
         spin_unlock(&inode->i_lock);
 
         hugetlb_put_quota(inode->i_mapping, (chg - freed));
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index e766e1da09d2..487267310a84 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -103,10 +103,10 @@
  * Kmemleak configuration and common defines.
  */
 #define MAX_TRACE               16      /* stack trace length */
-#define REPORTS_NR              50      /* maximum number of reported leaks */
 #define MSECS_MIN_AGE           5000    /* minimum object age for reporting */
 #define SECS_FIRST_SCAN         60      /* delay before the first scan */
 #define SECS_SCAN_WAIT          600     /* subsequent auto scanning delay */
+#define GRAY_LIST_PASSES        25      /* maximum number of gray list scans */
 
 #define BYTES_PER_POINTER       sizeof(void *)
 
@@ -158,6 +158,8 @@ struct kmemleak_object {
 #define OBJECT_REPORTED         (1 << 1)
 /* flag set to not scan the object */
 #define OBJECT_NO_SCAN          (1 << 2)
+/* flag set on newly allocated objects */
+#define OBJECT_NEW              (1 << 3)
 
 /* the list of all allocated objects */
 static LIST_HEAD(object_list);
@@ -196,9 +198,6 @@ static int kmemleak_stack_scan = 1;
 /* protects the memory scanning, parameters and debug/kmemleak file access */
 static DEFINE_MUTEX(scan_mutex);
 
-/* number of leaks reported (for limitation purposes) */
-static int reported_leaks;
-
 /*
  * Early object allocation/freeing logging. Kmemleak is initialized after the
  * kernel allocator. However, both the kernel allocator and kmemleak may
@@ -211,6 +210,7 @@ static int reported_leaks;
 enum {
         KMEMLEAK_ALLOC,
         KMEMLEAK_FREE,
+        KMEMLEAK_FREE_PART,
         KMEMLEAK_NOT_LEAK,
         KMEMLEAK_IGNORE,
         KMEMLEAK_SCAN_AREA,
@@ -274,6 +274,11 @@ static int color_gray(const struct kmemleak_object *object)
         return object->min_count != -1 && object->count >= object->min_count;
 }
 
+static int color_black(const struct kmemleak_object *object)
+{
+        return object->min_count == -1;
+}
+
 /*
  * Objects are considered unreferenced only if their color is white, they have
  * not be deleted and have a minimum age to avoid false positives caused by
@@ -451,7 +456,7 @@ static void create_object(unsigned long ptr, size_t size, int min_count,
         INIT_HLIST_HEAD(&object->area_list);
         spin_lock_init(&object->lock);
         atomic_set(&object->use_count, 1);
-        object->flags = OBJECT_ALLOCATED;
+        object->flags = OBJECT_ALLOCATED | OBJECT_NEW;
         object->pointer = ptr;
         object->size = size;
         object->min_count = min_count;
@@ -519,27 +524,17 @@ out:
  * Remove the metadata (struct kmemleak_object) for a memory block from the
  * object_list and object_tree_root and decrement its use_count.
  */
-static void delete_object(unsigned long ptr)
+static void __delete_object(struct kmemleak_object *object)
 {
         unsigned long flags;
-        struct kmemleak_object *object;
 
         write_lock_irqsave(&kmemleak_lock, flags);
-        object = lookup_object(ptr, 0);
-        if (!object) {
-#ifdef DEBUG
-                kmemleak_warn("Freeing unknown object at 0x%08lx\n",
-                              ptr);
-#endif
-                write_unlock_irqrestore(&kmemleak_lock, flags);
-                return;
-        }
         prio_tree_remove(&object_tree_root, &object->tree_node);
         list_del_rcu(&object->object_list);
         write_unlock_irqrestore(&kmemleak_lock, flags);
 
         WARN_ON(!(object->flags & OBJECT_ALLOCATED));
-        WARN_ON(atomic_read(&object->use_count) < 1);
+        WARN_ON(atomic_read(&object->use_count) < 2);
 
         /*
          * Locking here also ensures that the corresponding memory block
@@ -552,6 +547,64 @@ static void delete_object(unsigned long ptr)
 }
 
 /*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it.
+ */
+static void delete_object_full(unsigned long ptr)
+{
+        struct kmemleak_object *object;
+
+        object = find_and_get_object(ptr, 0);
+        if (!object) {
+#ifdef DEBUG
+                kmemleak_warn("Freeing unknown object at 0x%08lx\n",
+                              ptr);
+#endif
+                return;
+        }
+        __delete_object(object);
+        put_object(object);
+}
+
+/*
+ * Look up the metadata (struct kmemleak_object) corresponding to ptr and
+ * delete it. If the memory block is partially freed, the function may create
+ * additional metadata for the remaining parts of the block.
+ */
+static void delete_object_part(unsigned long ptr, size_t size)
+{
+        struct kmemleak_object *object;
+        unsigned long start, end;
+
+        object = find_and_get_object(ptr, 1);
+        if (!object) {
+#ifdef DEBUG
+                kmemleak_warn("Partially freeing unknown object at 0x%08lx "
+                              "(size %zu)\n", ptr, size);
+#endif
+                return;
+        }
+        __delete_object(object);
+
+        /*
+         * Create one or two objects that may result from the memory block
+         * split. Note that partial freeing is only done by free_bootmem() and
+         * this happens before kmemleak_init() is called. The path below is
+         * only executed during early log recording in kmemleak_init(), so
+         * GFP_KERNEL is enough.
+         */
+        start = object->pointer;
+        end = object->pointer + object->size;
+        if (ptr > start)
+                create_object(start, ptr - start, object->min_count,
+                              GFP_KERNEL);
+        if (ptr + size < end)
+                create_object(ptr + size, end - ptr - size, object->min_count,
+                              GFP_KERNEL);
+
+        put_object(object);
+}
+/*
  * Make a object permanently as gray-colored so that it can no longer be
  * reported as a leak. This is used in general to mark a false positive.
  */
@@ -715,13 +768,28 @@ void kmemleak_free(const void *ptr)
         pr_debug("%s(0x%p)\n", __func__, ptr);
 
         if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
-                delete_object((unsigned long)ptr);
+                delete_object_full((unsigned long)ptr);
         else if (atomic_read(&kmemleak_early_log))
                 log_early(KMEMLEAK_FREE, ptr, 0, 0, 0, 0);
 }
 EXPORT_SYMBOL_GPL(kmemleak_free);
 
 /*
+ * Partial memory freeing function callback. This function is usually called
+ * from bootmem allocator when (part of) a memory block is freed.
+ */
+void kmemleak_free_part(const void *ptr, size_t size)
+{
+        pr_debug("%s(0x%p)\n", __func__, ptr);
+
+        if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr))
+                delete_object_part((unsigned long)ptr, size);
+        else if (atomic_read(&kmemleak_early_log))
+                log_early(KMEMLEAK_FREE_PART, ptr, size, 0, 0, 0);
+}
+EXPORT_SYMBOL_GPL(kmemleak_free_part);
+
+/*
  * Mark an already allocated memory block as a false positive. This will cause
  * the block to no longer be reported as leak and always be scanned.
  */
@@ -807,7 +875,7 @@ static int scan_should_stop(void)
  * found to the gray list.
  */
 static void scan_block(void *_start, void *_end,
-                       struct kmemleak_object *scanned)
+                       struct kmemleak_object *scanned, int allow_resched)
 {
         unsigned long *ptr;
         unsigned long *start = PTR_ALIGN(_start, BYTES_PER_POINTER);
@@ -818,6 +886,8 @@ static void scan_block(void *_start, void *_end,
                 unsigned long pointer = *ptr;
                 struct kmemleak_object *object;
 
+                if (allow_resched)
+                        cond_resched();
                 if (scan_should_stop())
                         break;
 
@@ -881,12 +951,12 @@ static void scan_object(struct kmemleak_object *object)
                 goto out;
         if (hlist_empty(&object->area_list))
                 scan_block((void *)object->pointer,
-                           (void *)(object->pointer + object->size), object);
+                           (void *)(object->pointer + object->size), object, 0);
         else
                 hlist_for_each_entry(area, elem, &object->area_list, node)
                         scan_block((void *)(object->pointer + area->offset),
                                    (void *)(object->pointer + area->offset
-                                            + area->length), object);
+                                            + area->length), object, 0);
 out:
         spin_unlock_irqrestore(&object->lock, flags);
 }
@@ -903,6 +973,7 @@ static void kmemleak_scan(void)
         struct task_struct *task;
         int i;
         int new_leaks = 0;
+        int gray_list_pass = 0;
 
         jiffies_last_scan = jiffies;
 
@@ -923,6 +994,7 @@ static void kmemleak_scan(void)
 #endif
                 /* reset the reference count (whiten the object) */
                 object->count = 0;
+                object->flags &= ~OBJECT_NEW;
                 if (color_gray(object) && get_object(object))
                         list_add_tail(&object->gray_list, &gray_list);
 
@@ -931,14 +1003,14 @@ static void kmemleak_scan(void)
         rcu_read_unlock();
 
         /* data/bss scanning */
-        scan_block(_sdata, _edata, NULL);
-        scan_block(__bss_start, __bss_stop, NULL);
+        scan_block(_sdata, _edata, NULL, 1);
+        scan_block(__bss_start, __bss_stop, NULL, 1);
 
 #ifdef CONFIG_SMP
         /* per-cpu sections scanning */
         for_each_possible_cpu(i)
                 scan_block(__per_cpu_start + per_cpu_offset(i),
-                           __per_cpu_end + per_cpu_offset(i), NULL);
+                           __per_cpu_end + per_cpu_offset(i), NULL, 1);
 #endif
 
         /*
@@ -960,7 +1032,7 @@ static void kmemleak_scan(void)
                         /* only scan if page is in use */
                         if (page_count(page) == 0)
                                 continue;
-                        scan_block(page, page + 1, NULL);
+                        scan_block(page, page + 1, NULL, 1);
                 }
         }
 
@@ -972,7 +1044,8 @@ static void kmemleak_scan(void)
                 read_lock(&tasklist_lock);
                 for_each_process(task)
                         scan_block(task_stack_page(task),
-                                   task_stack_page(task) + THREAD_SIZE, NULL);
+                                   task_stack_page(task) + THREAD_SIZE,
+                                   NULL, 0);
                 read_unlock(&tasklist_lock);
         }
 
@@ -984,6 +1057,7 @@ static void kmemleak_scan(void)
          * kmemleak objects cannot be freed from outside the loop because their
          * use_count was increased.
          */
+repeat:
         object = list_entry(gray_list.next, typeof(*object), gray_list);
         while (&object->gray_list != &gray_list) {
                 cond_resched();
@@ -1001,12 +1075,38 @@ static void kmemleak_scan(void)
 
                 object = tmp;
         }
+
+        if (scan_should_stop() || ++gray_list_pass >= GRAY_LIST_PASSES)
+                goto scan_end;
+
+        /*
+         * Check for new objects allocated during this scanning and add them
+         * to the gray list.
+         */
+        rcu_read_lock();
+        list_for_each_entry_rcu(object, &object_list, object_list) {
+                spin_lock_irqsave(&object->lock, flags);
+                if ((object->flags & OBJECT_NEW) && !color_black(object) &&
+                    get_object(object)) {
+                        object->flags &= ~OBJECT_NEW;
+                        list_add_tail(&object->gray_list, &gray_list);
+                }
+                spin_unlock_irqrestore(&object->lock, flags);
+        }
+        rcu_read_unlock();
+
+        if (!list_empty(&gray_list))
+                goto repeat;
+
+scan_end:
         WARN_ON(!list_empty(&gray_list));
 
         /*
-         * If scanning was stopped do not report any new unreferenced objects.
+         * If scanning was stopped or new objects were being allocated at a
+         * higher rate than gray list scanning, do not report any new
+         * unreferenced objects.
          */
-        if (scan_should_stop())
+        if (scan_should_stop() || gray_list_pass >= GRAY_LIST_PASSES)
                 return;
 
         /*
@@ -1039,6 +1139,7 @@ static int kmemleak_scan_thread(void *arg)
         static int first_run = 1;
 
         pr_info("Automatic memory scanning thread started\n");
+        set_user_nice(current, 10);
 
         /*
          * Wait before the first scan to allow the system to fully initialize.
@@ -1101,11 +1202,11 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
 {
         struct kmemleak_object *object;
         loff_t n = *pos;
+        int err;
 
-        if (!n)
-                reported_leaks = 0;
-        if (reported_leaks >= REPORTS_NR)
-                return NULL;
+        err = mutex_lock_interruptible(&scan_mutex);
+        if (err < 0)
+                return ERR_PTR(err);
 
         rcu_read_lock();
         list_for_each_entry_rcu(object, &object_list, object_list) {
@@ -1116,7 +1217,6 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
         }
         object = NULL;
 out:
-        rcu_read_unlock();
         return object;
 }
 
@@ -1131,17 +1231,13 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos)
         struct list_head *n = &prev_obj->object_list;
 
         ++(*pos);
-        if (reported_leaks >= REPORTS_NR)
-                goto out;
 
-        rcu_read_lock();
         list_for_each_continue_rcu(n, &object_list) {
                 next_obj = list_entry(n, struct kmemleak_object, object_list);
                 if (get_object(next_obj))
                         break;
         }
-        rcu_read_unlock();
-out:
+
         put_object(prev_obj);
         return next_obj;
 }
@@ -1151,8 +1247,16 @@ out:
  */
 static void kmemleak_seq_stop(struct seq_file *seq, void *v)
 {
-        if (v)
-                put_object(v);
+        if (!IS_ERR(v)) {
+                /*
+                 * kmemleak_seq_start may return ERR_PTR if the scan_mutex
+                 * waiting was interrupted, so only release it if !IS_ERR.
+                 */
+                rcu_read_unlock();
+                mutex_unlock(&scan_mutex);
+                if (v)
+                        put_object(v);
+        }
 }
 
 /*
@@ -1164,10 +1268,8 @@ static int kmemleak_seq_show(struct seq_file *seq, void *v)
         unsigned long flags;
 
         spin_lock_irqsave(&object->lock, flags);
-        if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object)) {
+        if ((object->flags & OBJECT_REPORTED) && unreferenced_object(object))
                 print_unreferenced(seq, object);
-                reported_leaks++;
-        }
         spin_unlock_irqrestore(&object->lock, flags);
         return 0;
 }
@@ -1181,36 +1283,15 @@ static const struct seq_operations kmemleak_seq_ops = {
 
 static int kmemleak_open(struct inode *inode, struct file *file)
 {
-        int ret = 0;
-
         if (!atomic_read(&kmemleak_enabled))
                 return -EBUSY;
 
-        ret = mutex_lock_interruptible(&scan_mutex);
-        if (ret < 0)
-                goto out;
-        if (file->f_mode & FMODE_READ) {
-                ret = seq_open(file, &kmemleak_seq_ops);
-                if (ret < 0)
-                        goto scan_unlock;
-        }
-        return ret;
-
-scan_unlock:
-        mutex_unlock(&scan_mutex);
-out:
-        return ret;
+        return seq_open(file, &kmemleak_seq_ops);
 }
 
 static int kmemleak_release(struct inode *inode, struct file *file)
 {
-        int ret = 0;
-
-        if (file->f_mode & FMODE_READ)
-                seq_release(inode, file);
-        mutex_unlock(&scan_mutex);
-
-        return ret;
+        return seq_release(inode, file);
 }
 
 /*
@@ -1230,15 +1311,17 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
 {
         char buf[64];
         int buf_size;
-
-        if (!atomic_read(&kmemleak_enabled))
-                return -EBUSY;
+        int ret;
 
         buf_size = min(size, (sizeof(buf) - 1));
         if (strncpy_from_user(buf, user_buf, buf_size) < 0)
                 return -EFAULT;
         buf[buf_size] = 0;
 
+        ret = mutex_lock_interruptible(&scan_mutex);
+        if (ret < 0)
+                return ret;
+
         if (strncmp(buf, "off", 3) == 0)
                 kmemleak_disable();
         else if (strncmp(buf, "stack=on", 8) == 0)
@@ -1251,11 +1334,10 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
                 stop_scan_thread();
         else if (strncmp(buf, "scan=", 5) == 0) {
                 unsigned long secs;
-                int err;
 
-                err = strict_strtoul(buf + 5, 0, &secs);
-                if (err < 0)
-                        return err;
+                ret = strict_strtoul(buf + 5, 0, &secs);
+                if (ret < 0)
+                        goto out;
                 stop_scan_thread();
                 if (secs) {
                         jiffies_scan_wait = msecs_to_jiffies(secs * 1000);
@@ -1264,7 +1346,12 @@ static ssize_t kmemleak_write(struct file *file, const char __user *user_buf,
         } else if (strncmp(buf, "scan", 4) == 0)
                 kmemleak_scan();
         else
-                return -EINVAL;
+                ret = -EINVAL;
+
+out:
+        mutex_unlock(&scan_mutex);
+        if (ret < 0)
+                return ret;
 
         /* ignore the rest of the buffer, only one command at a time */
         *ppos += size;
@@ -1293,7 +1380,7 @@ static int kmemleak_cleanup_thread(void *arg)
 
         rcu_read_lock();
         list_for_each_entry_rcu(object, &object_list, object_list)
-                delete_object(object->pointer);
+                delete_object_full(object->pointer);
         rcu_read_unlock();
         mutex_unlock(&scan_mutex);
 
@@ -1388,6 +1475,9 @@ void __init kmemleak_init(void)
                 case KMEMLEAK_FREE:
                         kmemleak_free(log->ptr);
                         break;
+                case KMEMLEAK_FREE_PART:
+                        kmemleak_free_part(log->ptr, log->size);
+                        break;
                 case KMEMLEAK_NOT_LEAK:
                         kmemleak_not_leak(log->ptr);
                         break;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e717964cb5a0..fd4529d86de5 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1207,6 +1207,12 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
         ret = 0;
 out:
         unlock_page_cgroup(pc);
+        /*
+         * We charges against "to" which may not have any tasks. Then, "to"
+         * can be under rmdir(). But in current implementation, caller of
+         * this function is just force_empty() and it's garanteed that
+         * "to" is never removed. So, we don't check rmdir status here.
+         */
         return ret;
 }
 
@@ -1428,6 +1434,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
                 return;
         if (!ptr)
                 return;
+        cgroup_exclude_rmdir(&ptr->css);
         pc = lookup_page_cgroup(page);
         mem_cgroup_lru_del_before_commit_swapcache(page);
         __mem_cgroup_commit_charge(ptr, pc, ctype);
@@ -1457,8 +1464,12 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
                 }
                 rcu_read_unlock();
         }
-        /* add this page(page_cgroup) to the LRU we want. */
-
+        /*
+         * At swapin, we may charge account against cgroup which has no tasks.
+         * So, rmdir()->pre_destroy() can be called while we do this charge.
+         * In that case, we need to call pre_destroy() again. check it here.
+         */
+        cgroup_release_and_wakeup_rmdir(&ptr->css);
 }
 
 void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr)
@@ -1664,7 +1675,7 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 
         if (!mem)
                 return;
-
+        cgroup_exclude_rmdir(&mem->css);
         /* at migration success, oldpage->mapping is NULL. */
         if (oldpage->mapping) {
                 target = oldpage;
@@ -1704,6 +1715,12 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
          */
         if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
                 mem_cgroup_uncharge_page(target);
+        /*
+         * At migration, we may charge account against cgroup which has no tasks
+         * So, rmdir()->pre_destroy() can be called while we do this charge.
+         * In that case, we need to call pre_destroy() again. check it here.
+         */
+        cgroup_release_and_wakeup_rmdir(&mem->css);
 }
 
 /*
diff --git a/mm/memory.c b/mm/memory.c
index 65216194eb8d..aede2ce3aba4 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -135,11 +135,12 @@ void pmd_clear_bad(pmd_t *pmd)
  * Note: this doesn't free the actual pages themselves. That
  * has been handled earlier when unmapping all the memory regions.
  */
-static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
+static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+                           unsigned long addr)
 {
         pgtable_t token = pmd_pgtable(*pmd);
         pmd_clear(pmd);
-        pte_free_tlb(tlb, token);
+        pte_free_tlb(tlb, token, addr);
         tlb->mm->nr_ptes--;
 }
 
@@ -157,7 +158,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
                 next = pmd_addr_end(addr, end);
                 if (pmd_none_or_clear_bad(pmd))
                         continue;
-                free_pte_range(tlb, pmd);
+                free_pte_range(tlb, pmd, addr);
         } while (pmd++, addr = next, addr != end);
 
         start &= PUD_MASK;
@@ -173,7 +174,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
         pmd = pmd_offset(pud, start);
         pud_clear(pud);
-        pmd_free_tlb(tlb, pmd);
+        pmd_free_tlb(tlb, pmd, start);
 }
 
 static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -206,7 +207,7 @@ static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
         pud = pud_offset(pgd, start);
         pgd_clear(pgd);
-        pud_free_tlb(tlb, pud);
+        pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a35eeab2724c..d052abbe3063 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -882,7 +882,7 @@ retry_reserve:
  */
 static int rmqueue_bulk(struct zone *zone, unsigned int order, 
                         unsigned long count, struct list_head *list,
-                        int migratetype)
+                        int migratetype, int cold)
 {
         int i;
         
@@ -901,7 +901,10 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order,
                  * merge IO requests if the physical pages are ordered
                  * properly.
                  */
-                list_add(&page->lru, list);
+                if (likely(cold == 0))
+                        list_add(&page->lru, list);
+                else
+                        list_add_tail(&page->lru, list);
                 set_page_private(page, migratetype);
                 list = &page->lru;
         }
@@ -1119,7 +1122,8 @@ again:
                 local_irq_save(flags);
                 if (!pcp->count) {
                         pcp->count = rmqueue_bulk(zone, 0,
-                                        pcp->batch, &pcp->list, migratetype);
+                                        pcp->batch, &pcp->list,
+                                        migratetype, cold);
                         if (unlikely(!pcp->count))
                                 goto failed;
                 }
@@ -1138,7 +1142,8 @@ again:
                 /* Allocate more to the pcp list if necessary */
                 if (unlikely(&page->lru == &pcp->list)) {
                         pcp->count += rmqueue_bulk(zone, 0,
-                                        pcp->batch, &pcp->list, migratetype);
+                                        pcp->batch, &pcp->list,
+                                        migratetype, cold);
                         page = list_entry(pcp->list.next, struct page, lru);
                 }
 
@@ -1740,8 +1745,10 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
          * be using allocators in order of preference for an area that is
          * too large.
          */
-        if (WARN_ON_ONCE(order >= MAX_ORDER))
+        if (order >= MAX_ORDER) {
+                WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
                 return NULL;
+        }
 
         /*
          * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1789,6 +1796,10 @@ rebalance:
         if (p->flags & PF_MEMALLOC)
                 goto nopage;
 
+        /* Avoid allocations with no watermarks from looping endlessly */
+        if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
+                goto nopage;
+
         /* Try direct reclaim and then allocating */
         page = __alloc_pages_direct_reclaim(gfp_mask, order,
                                         zonelist, high_zoneidx,
@@ -4745,8 +4756,10 @@ void *__init alloc_large_system_hash(const char *tablename,
                          * some pages at the end of hash table which
                          * alloc_pages_exact() automatically does
                          */
-                        if (get_order(size) < MAX_ORDER)
+                        if (get_order(size) < MAX_ORDER) {
                                 table = alloc_pages_exact(size, GFP_ATOMIC);
+                                kmemleak_alloc(table, size, 1, GFP_ATOMIC);
+                        }
                 }
         } while (!table && size > PAGE_SIZE && --log2qty);
 
@@ -4764,16 +4777,6 @@ void *__init alloc_large_system_hash(const char *tablename,
         if (_hash_mask)
                 *_hash_mask = (1 << log2qty) - 1;
 
-        /*
-         * If hashdist is set, the table allocation is done with __vmalloc()
-         * which invokes the kmemleak_alloc() callback. This function may also
-         * be called before the slab and kmemleak are initialised when
-         * kmemleak simply buffers the request to be executed later
-         * (GFP_ATOMIC flag ignored in this case).
-         */
-        if (!hashdist)
-                kmemleak_alloc(table, size, 1, GFP_ATOMIC);
-
         return table;
 }
 
diff --git a/mm/slub.c b/mm/slub.c
index a9201d83178b..b9f1491a58a1 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -21,7 +21,6 @@
 #include <linux/kmemcheck.h>
 #include <linux/cpu.h>
 #include <linux/cpuset.h>
-#include <linux/kmemleak.h>
 #include <linux/mempolicy.h>
 #include <linux/ctype.h>
 #include <linux/debugobjects.h>
@@ -2835,13 +2834,15 @@ EXPORT_SYMBOL(__kmalloc);
 static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
 {
         struct page *page;
+        void *ptr = NULL;
 
         flags |= __GFP_COMP | __GFP_NOTRACK;
         page = alloc_pages_node(node, flags, get_order(size));
         if (page)
-                return page_address(page);
-        else
-                return NULL;
+                ptr = page_address(page);
+
+        kmemleak_alloc(ptr, size, 1, flags);
+        return ptr;
 }
 
 #ifdef CONFIG_NUMA
@@ -2926,6 +2927,7 @@ void kfree(const void *x)
         page = virt_to_head_page(x);
         if (unlikely(!PageSlab(page))) {
                 BUG_ON(!PageCompound(page));
+                kmemleak_free(x);
                 put_page(page);
                 return;
         }
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d1ade1a48ee7..8ffdc0d23c53 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -753,7 +753,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 
                 if (!bdev) {
                         if (bdev_p)
-                                *bdev_p = bdget(sis->bdev->bd_dev);
+                                *bdev_p = bdgrab(sis->bdev);
 
                         spin_unlock(&swap_lock);
                         return i;
@@ -765,7 +765,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
                                         struct swap_extent, list);
                         if (se->start_block == offset) {
                                 if (bdev_p)
-                                        *bdev_p = bdget(sis->bdev->bd_dev);
+                                        *bdev_p = bdgrab(sis->bdev);
 
                                 spin_unlock(&swap_lock);
                                 bdput(bdev);
diff --git a/net/9p/client.c b/net/9p/client.c
index dd43a8289b0d..787ccddb85ea 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -117,9 +117,6 @@ static int parse_opts(char *opts, struct p9_client *clnt)
                 }
         }
 
-        if (!clnt->trans_mod)
-                clnt->trans_mod = v9fs_get_default_trans();
-
         kfree(options);
         return ret;
 }
@@ -689,6 +686,9 @@ struct p9_client *p9_client_create(const char *dev_name, char *options)
         if (err < 0)
                 goto error;
 
+        if (!clnt->trans_mod)
+                clnt->trans_mod = v9fs_get_default_trans();
+
         if (clnt->trans_mod == NULL) {
                 err = -EPROTONOSUPPORT;
                 P9_DPRINTK(P9_DEBUG_ERROR,
@@ -1098,7 +1098,6 @@ p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
 
         if (data) {
                 memmove(data, dataptr, count);
-                data += count;
         }
 
         if (udata) {
@@ -1192,9 +1191,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 
         err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret);
         if (err) {
-                ret = ERR_PTR(err);
                 p9pdu_dump(1, req->rc);
-                goto free_and_error;
+                p9_free_req(clnt, req);
+                goto error;
         }
 
         P9_DPRINTK(P9_DEBUG_9P,
@@ -1211,8 +1210,6 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
         p9_free_req(clnt, req);
         return ret;
 
-free_and_error:
-        p9_free_req(clnt, req);
 error:
         kfree(ret);
         return ERR_PTR(err);
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 590b83963622..bfbe13786bb4 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -54,6 +54,7 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/if_arp.h>
+#include <linux/smp_lock.h>
 #include <linux/termios.h>      /* For TIOCOUTQ/INQ */
 #include <net/datalink.h>
 #include <net/psnap.h>
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 8a96672e2c5c..eb404dc3ed6e 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -424,7 +424,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 err2:
         br_fdb_delete_by_port(br, p, 1);
 err1:
-        kobject_del(&p->kobj);
+        kobject_put(&p->kobj);
 err0:
         dev_set_promiscuity(dev, -1);
 put_back:
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 95d7f32643ae..72720c710351 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -75,6 +75,7 @@ static __initdata const char banner[] = KERN_INFO
 MODULE_DESCRIPTION("PF_CAN broadcast manager protocol");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Oliver Hartkopp <oliver.hartkopp@volkswagen.de>");
+MODULE_ALIAS("can-proto-2");
 
 /* easy access to can_frame payload */
 static inline u64 GET_U64(const struct can_frame *cp)
@@ -1469,6 +1470,9 @@ static int bcm_release(struct socket *sock)
                 bo->ifindex = 0;
         }
 
+        sock_orphan(sk);
+        sock->sk = NULL;
+
         release_sock(sk);
         sock_put(sk);
 
diff --git a/net/can/raw.c b/net/can/raw.c
index 6aa154e806ae..f4cc44548bda 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -62,6 +62,7 @@ static __initdata const char banner[] =
 MODULE_DESCRIPTION("PF_CAN raw protocol");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Urs Thuermann <urs.thuermann@volkswagen.de>");
+MODULE_ALIAS("can-proto-1");
 
 #define MASK_ALL 0
 
@@ -306,6 +307,9 @@ static int raw_release(struct socket *sock)
         ro->bound   = 0;
         ro->count   = 0;
 
+        sock_orphan(sk);
+        sock->sk = NULL;
+
         release_sock(sk);
         sock_put(sk);
 
diff --git a/net/core/sock.c b/net/core/sock.c
index 6354863b1c68..bbb25be7ddfe 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -631,7 +631,7 @@ set_rcvbuf:
 
         case SO_TIMESTAMPING:
                 if (val & ~SOF_TIMESTAMPING_MASK) {
-                        ret = EINVAL;
+                        ret = -EINVAL;
                         break;
                 }
                 sock_valbool_flag(sk, SOCK_TIMESTAMPING_TX_HARDWARE,
@@ -919,13 +919,19 @@ static inline void sock_lock_init(struct sock *sk)
                         af_family_keys + sk->sk_family);
 }
 
+/*
+ * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
+ * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ */
 static void sock_copy(struct sock *nsk, const struct sock *osk)
 {
 #ifdef CONFIG_SECURITY_NETWORK
         void *sptr = nsk->sk_security;
 #endif
-
-        memcpy(nsk, osk, osk->sk_prot->obj_size);
+        BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
+                     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+        memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
+               osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
 #ifdef CONFIG_SECURITY_NETWORK
         nsk->sk_security = sptr;
         security_sk_clone(osk, nsk);
@@ -939,8 +945,23 @@ static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
         struct kmem_cache *slab;
 
         slab = prot->slab;
-        if (slab != NULL)
-                sk = kmem_cache_alloc(slab, priority);
+        if (slab != NULL) {
+                sk = kmem_cache_alloc(slab, priority & ~__GFP_ZERO);
+                if (!sk)
+                        return sk;
+                if (priority & __GFP_ZERO) {
+                        /*
+                         * caches using SLAB_DESTROY_BY_RCU should let
+                         * sk_node.next un-modified. Special care is taken
+                         * when initializing object to zero.
+                         */
+                        if (offsetof(struct sock, sk_node.next) != 0)
+                                memset(sk, 0, offsetof(struct sock, sk_node.next));
+                        memset(&sk->sk_node.pprev, 0,
+                               prot->obj_size - offsetof(struct sock,
+                                                         sk_node.pprev));
+                }
+        }
         else
                 sk = kmalloc(prot->obj_size, priority);
 
@@ -1125,6 +1146,11 @@ struct sock *sk_clone(const struct sock *sk, const gfp_t priority)
 
                 newsk->sk_err      = 0;
                 newsk->sk_priority = 0;
+                /*
+                 * Before updating sk_refcnt, we must commit prior changes to memory
+                 * (Documentation/RCU/rculist_nulls.txt for details)
+                 */
+                smp_wmb();
                 atomic_set(&newsk->sk_refcnt, 2);
 
                 /*
@@ -1840,6 +1866,11 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 
         sk->sk_stamp = ktime_set(-1L, 0);
 
+        /*
+         * Before updating sk_refcnt, we must commit prior changes to memory
+         * (Documentation/RCU/rculist_nulls.txt for details)
+         */
+        smp_wmb();
         atomic_set(&sk->sk_refcnt, 1);
         atomic_set(&sk->sk_wmem_alloc, 1);
         atomic_set(&sk->sk_drops, 0);
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 94ca8eaace7d..3281013ce038 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1066,7 +1066,7 @@ static int __init dccp_init(void)
                        (dccp_hashinfo.ehash_size - 1))
                         dccp_hashinfo.ehash_size--;
                 dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
-                        __get_free_pages(GFP_ATOMIC, ehash_order);
+                        __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
         } while (!dccp_hashinfo.ehash && --ehash_order > 0);
 
         if (!dccp_hashinfo.ehash) {
@@ -1091,7 +1091,7 @@ static int __init dccp_init(void)
                     bhash_order > 0)
                         continue;
                 dccp_hashinfo.bhash = (struct inet_bind_hashbucket *)
-                        __get_free_pages(GFP_ATOMIC, bhash_order);
+                        __get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order);
         } while (!dccp_hashinfo.bhash && --bhash_order >= 0);
 
         if (!dccp_hashinfo.bhash) {
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 44e2a3d2359a..cb4a0f4bd5e5 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -735,10 +735,10 @@ static int ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
         }
 
         tos = tiph->tos;
-        if (tos&1) {
+        if (tos == 1) {
+                tos = 0;
                 if (skb->protocol == htons(ETH_P_IP))
                         tos = old_iph->tos;
-                tos &= ~1;
         }
 
         {
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 247026282669..7d0821054729 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1243,7 +1243,6 @@ int ip_push_pending_frames(struct sock *sk)
                 skb->len += tmp_skb->len;
                 skb->data_len += tmp_skb->len;
                 skb->truesize += tmp_skb->truesize;
-                __sock_put(tmp_skb->sk);
                 tmp_skb->destructor = NULL;
                 tmp_skb->sk = NULL;
         }
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 5a1ca2698c88..6d88219c5e22 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1160,6 +1160,7 @@ struct request_sock_ops tcp_request_sock_ops __read_mostly = {
 #ifdef CONFIG_TCP_MD5SIG
 static struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
         .md5_lookup     =       tcp_v4_reqsk_md5_lookup,
+        .calc_md5_hash  =       tcp_v4_md5_hash_skb,
 };
 #endif
 
@@ -1373,7 +1374,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
                  */
                 char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
                 if (newkey != NULL)
-                        tcp_v4_md5_do_add(newsk, inet_sk(sk)->daddr,
+                        tcp_v4_md5_do_add(newsk, newinet->daddr,
                                           newkey, key->keylen);
                 newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
         }
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 5bdf08d312d9..bd62712848fa 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2261,7 +2261,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 #ifdef CONFIG_TCP_MD5SIG
         /* Okay, we have all we need - do the md5 hash if needed */
         if (md5) {
-                tp->af_specific->calc_md5_hash(md5_hash_location,
+                tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location,
                                                md5, NULL, req, skb);
         }
 #endif
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 7c76e3d18215..87f8419a68fd 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1484,7 +1484,6 @@ int ip6_push_pending_frames(struct sock *sk)
                 skb->len += tmp_skb->len;
                 skb->data_len += tmp_skb->len;
                 skb->truesize += tmp_skb->truesize;
-                __sock_put(tmp_skb->sk);
                 tmp_skb->destructor = NULL;
                 tmp_skb->sk = NULL;
         }
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 68e52308e552..98b7327d0949 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -1018,6 +1018,7 @@ static void ipip6_tunnel_setup(struct net_device *dev)
         dev->hard_header_len    = LL_MAX_HEADER + sizeof(struct iphdr);
         dev->mtu                = ETH_DATA_LEN - sizeof(struct iphdr);
         dev->flags              = IFF_NOARP;
+        dev->priv_flags        &= ~IFF_XMIT_DST_RELEASE;
         dev->iflink             = 0;
         dev->addr_len           = 4;
         dev->features           |= NETIF_F_NETNS_LOCAL;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 58810c65b635..d849dd53b788 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -896,6 +896,7 @@ struct request_sock_ops tcp6_request_sock_ops __read_mostly = {
 #ifdef CONFIG_TCP_MD5SIG
 static struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
         .md5_lookup     =       tcp_v6_reqsk_md5_lookup,
+        .calc_md5_hash  =       tcp_v6_md5_hash_skb,
 };
 #endif
 
@@ -1441,7 +1442,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
                  */
                 char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
                 if (newkey != NULL)
-                        tcp_v6_md5_do_add(newsk, &inet6_sk(sk)->daddr,
+                        tcp_v6_md5_do_add(newsk, &newnp->daddr,
                                           newkey, key->keylen);
         }
 #endif
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 417b0e309495..f1118d92a191 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -41,6 +41,7 @@
 #include <linux/netdevice.h>
 #include <linux/uio.h>
 #include <linux/skbuff.h>
+#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/string.h>
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index cb762c8723ea..80cf29aae096 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,6 +45,7 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/init.h>
diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
index bccf4d0059f0..b001c361ad30 100644
--- a/net/irda/irnet/irnet.h
+++ b/net/irda/irnet/irnet.h
@@ -241,7 +241,6 @@
 #include <linux/module.h>
 
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/skbuff.h>
 #include <linux/tty.h>
 #include <linux/proc_fs.h>
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 6d8ae03c14f5..68cbcb19cbd8 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -13,6 +13,7 @@
  *      2) as a control channel (write commands, read events)
  */
 
+#include <linux/smp_lock.h>
 #include "irnet_ppp.h"          /* Private header */
 /* Please put other headers in irnet.h - Thanks */
 
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index ecf4eb2717cb..9cb79f95bf63 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1453,6 +1453,7 @@ struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance)
         }
         /* Dup */
         memcpy(new, orig, sizeof(struct tsap_cb));
+        spin_lock_init(&new->lock);
 
         /* We don't need the old instance any more */
         spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ba2643a43c73..7836ee928983 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -83,6 +83,7 @@ endmenu
 config MAC80211_MESH
         bool "Enable mac80211 mesh networking (pre-802.11s) support"
         depends on MAC80211 && EXPERIMENTAL
+        depends on BROKEN
         ---help---
          This options enables support of Draft 802.11s mesh networking.
          The implementation is based on Draft 1.08 of the Mesh Networking
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 3c72557df45a..479597e88583 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -175,6 +175,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
         int err = 0;
         u32 hash_idx;
 
+        might_sleep();
+
         if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
                 /* never add ourselves as neighbours */
                 return -ENOTSUPP;
@@ -265,6 +267,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
         int err = 0;
         u32 hash_idx;
 
+        might_sleep();
 
         if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
                 /* never add ourselves as neighbours */
@@ -491,8 +494,10 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
  * @skb: frame to discard
  * @sdata: network subif the frame was to be sent through
  *
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor.  The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
  *
  * Locking: the function must me called within a rcu_read_lock region
  */
@@ -507,7 +512,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
                 u8 *ra, *da;
 
                 da = hdr->addr3;
-                ra = hdr->addr2;
+                ra = hdr->addr1;
                 mpath = mesh_path_lookup(da, sdata);
                 if (mpath)
                         dsn = ++mpath->dsn;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d238a8939a09..3a8922cd1038 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1455,7 +1455,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 monitor_iface = UNKNOWN_ADDRESS;
 
                 len_rthdr = ieee80211_get_radiotap_len(skb->data);
-                hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
+                hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
                 hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
                 /* check the header is complete in the frame */
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7508f11c5b39..b5869b9574b0 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -561,23 +561,38 @@ struct nf_conn *nf_conntrack_alloc(struct net *net,
                 }
         }
 
-        ct = kmem_cache_zalloc(nf_conntrack_cachep, gfp);
+        /*
+         * Do not use kmem_cache_zalloc(), as this cache uses
+         * SLAB_DESTROY_BY_RCU.
+         */
+        ct = kmem_cache_alloc(nf_conntrack_cachep, gfp);
         if (ct == NULL) {
                 pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
                 atomic_dec(&net->ct.count);
                 return ERR_PTR(-ENOMEM);
         }
-
+        /*
+         * Let ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.next
+         * and ct->tuplehash[IP_CT_DIR_REPLY].hnnode.next unchanged.
+         */
+        memset(&ct->tuplehash[IP_CT_DIR_MAX], 0,
+               sizeof(*ct) - offsetof(struct nf_conn, tuplehash[IP_CT_DIR_MAX]));
         spin_lock_init(&ct->lock);
-        atomic_set(&ct->ct_general.use, 1);
         ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
+        ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode.pprev = NULL;
         ct->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
+        ct->tuplehash[IP_CT_DIR_REPLY].hnnode.pprev = NULL;
         /* Don't set timer yet: wait for confirmation */
         setup_timer(&ct->timeout, death_by_timeout, (unsigned long)ct);
 #ifdef CONFIG_NET_NS
         ct->ct_net = net;
 #endif
 
+        /*
+         * changes to lookup keys must be done before setting refcnt to 1
+         */
+        smp_wmb();
+        atomic_set(&ct->ct_general.use, 1);
         return ct;
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_alloc);
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 863e40977a4d..0f482e2440b4 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -330,7 +330,8 @@ static bool xt_osf_match_packet(const struct sk_buff *skb,
                         fcount++;
 
                         if (info->flags & XT_OSF_LOG)
-                                nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+                                nf_log_packet(p->family, p->hooknum, skb,
+                                        p->in, p->out, NULL,
                                         "%s [%s:%s] : %pi4:%d -> %pi4:%d hops=%d\n",
                                         f->genre, f->version, f->subtype,
                                         &ip->saddr, ntohs(tcp->source),
@@ -345,7 +346,7 @@ static bool xt_osf_match_packet(const struct sk_buff *skb,
         rcu_read_unlock();
 
         if (!fcount && (info->flags & XT_OSF_LOG))
-                nf_log_packet(p->hooknum, 0, skb, p->in, p->out, NULL,
+                nf_log_packet(p->family, p->hooknum, skb, p->in, p->out, NULL,
                         "Remote OS is not known: %pi4:%u -> %pi4:%u\n",
                                 &ip->saddr, ntohs(tcp->source),
                                 &ip->daddr, ntohs(tcp->dest));
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 79693fe2001e..2fc4a1724eb8 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -549,6 +549,10 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
         swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
         hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
         __rfkill_set_sw_state(rfkill, sw);
+        if (hw)
+                rfkill->state |= RFKILL_BLOCK_HW;
+        else
+                rfkill->state &= ~RFKILL_BLOCK_HW;
 
         spin_unlock_irqrestore(&rfkill->lock, flags);
 
@@ -648,15 +652,26 @@ static ssize_t rfkill_state_store(struct device *dev,
                                   struct device_attribute *attr,
                                   const char *buf, size_t count)
 {
-        /*
-         * The intention was that userspace can only take control over
-         * a given device when/if rfkill-input doesn't control it due
-         * to user_claim. Since user_claim is currently unsupported,
-         * we never support changing the state from userspace -- this
-         * can be implemented again later.
-         */
+        struct rfkill *rfkill = to_rfkill(dev);
+        unsigned long state;
+        int err;
+
+        if (!capable(CAP_NET_ADMIN))
+                return -EPERM;
+
+        err = strict_strtoul(buf, 0, &state);
+        if (err)
+                return err;
+
+        if (state != RFKILL_USER_STATE_SOFT_BLOCKED &&
+            state != RFKILL_USER_STATE_UNBLOCKED)
+                return -EINVAL;
+
+        mutex_lock(&rfkill_global_mutex);
+        rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
+        mutex_unlock(&rfkill_global_mutex);
 
-        return -EPERM;
+        return err ?: count;
 }
 
 static ssize_t rfkill_claim_show(struct device *dev,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 6bd8e93869ed..f0a76f6bca71 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -92,23 +92,21 @@ static void rose_set_lockdep_key(struct net_device *dev)
 /*
  *      Convert a ROSE address into text.
  */
-const char *rose2asc(const rose_address *addr)
+char *rose2asc(char *buf, const rose_address *addr)
 {
-        static char buffer[11];
-
         if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 &&
             addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 &&
             addr->rose_addr[4] == 0x00) {
-                strcpy(buffer, "*");
+                strcpy(buf, "*");
         } else {
-                sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
+                sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
                                                 addr->rose_addr[1] & 0xFF,
                                                 addr->rose_addr[2] & 0xFF,
                                                 addr->rose_addr[3] & 0xFF,
                                                 addr->rose_addr[4] & 0xFF);
         }
 
-        return buffer;
+        return buf;
 }
 
 /*
@@ -1437,7 +1435,7 @@ static void rose_info_stop(struct seq_file *seq, void *v)
 
 static int rose_info_show(struct seq_file *seq, void *v)
 {
-        char buf[11];
+        char buf[11], rsbuf[11];
 
         if (v == SEQ_START_TOKEN)
                 seq_puts(seq,
@@ -1455,8 +1453,8 @@ static int rose_info_show(struct seq_file *seq, void *v)
                         devname = dev->name;
 
                 seq_printf(seq, "%-10s %-9s ",
-                        rose2asc(&rose->dest_addr),
-                        ax2asc(buf, &rose->dest_call));
+                           rose2asc(rsbuf, &rose->dest_addr),
+                           ax2asc(buf, &rose->dest_call));
 
                 if (ax25cmp(&rose->source_call, &null_ax25_address) == 0)
                         callsign = "??????-?";
@@ -1465,7 +1463,7 @@ static int rose_info_show(struct seq_file *seq, void *v)
 
                 seq_printf(seq,
                            "%-10s %-9s %-5s %3.3X %05d  %d  %d  %d  %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n",
-                        rose2asc(&rose->source_addr),
+                        rose2asc(rsbuf, &rose->source_addr),
                         callsign,
                         devname,
                         rose->lci & 0x0FFF,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index a81066a1010a..9478d9b3d977 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -1104,6 +1104,7 @@ static void rose_node_stop(struct seq_file *seq, void *v)
 
 static int rose_node_show(struct seq_file *seq, void *v)
 {
+        char rsbuf[11];
         int i;
 
         if (v == SEQ_START_TOKEN)
@@ -1112,13 +1113,13 @@ static int rose_node_show(struct seq_file *seq, void *v)
                 const struct rose_node *rose_node = v;
                 /* if (rose_node->loopback) {
                         seq_printf(seq, "%-10s %04d 1 loopback\n",
-                                rose2asc(&rose_node->address),
-                                rose_node->mask);
+                                   rose2asc(rsbuf, &rose_node->address),
+                                   rose_node->mask);
                 } else { */
                         seq_printf(seq, "%-10s %04d %d",
-                                rose2asc(&rose_node->address),
-                                rose_node->mask,
-                                rose_node->count);
+                                   rose2asc(rsbuf, &rose_node->address),
+                                   rose_node->mask,
+                                   rose_node->count);
 
                         for (i = 0; i < rose_node->count; i++)
                                 seq_printf(seq, " %05d",
@@ -1267,7 +1268,7 @@ static void rose_route_stop(struct seq_file *seq, void *v)
 
 static int rose_route_show(struct seq_file *seq, void *v)
 {
-        char buf[11];
+        char buf[11], rsbuf[11];
 
         if (v == SEQ_START_TOKEN)
                 seq_puts(seq,
@@ -1279,7 +1280,7 @@ static int rose_route_show(struct seq_file *seq, void *v)
                         seq_printf(seq,
                                    "%3.3X  %-10s  %-9s  %05d      ",
                                    rose_route->lci1,
-                                   rose2asc(&rose_route->src_addr),
+                                   rose2asc(rsbuf, &rose_route->src_addr),
                                    ax2asc(buf, &rose_route->src_call),
                                    rose_route->neigh1->number);
                 else
@@ -1289,10 +1290,10 @@ static int rose_route_show(struct seq_file *seq, void *v)
                 if (rose_route->neigh2)
                         seq_printf(seq,
                                    "%3.3X  %-10s  %-9s  %05d\n",
-                                rose_route->lci2,
-                                rose2asc(&rose_route->dest_addr),
-                                ax2asc(buf, &rose_route->dest_call),
-                                rose_route->neigh2->number);
+                                   rose_route->lci2,
+                                   rose2asc(rsbuf, &rose_route->dest_addr),
+                                   ax2asc(buf, &rose_route->dest_call),
+                                   rose_route->neigh2->number);
                  else
                          seq_puts(seq,
                                   "000  *           *          00000\n");
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 5bc2f45bddf0..ebfcf9b89909 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -28,7 +28,6 @@
 #include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/utsname.h>
 #include <linux/workqueue.h>
 #include <linux/in6.h>
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 1102ce1251f7..8f459abe97cf 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -16,7 +16,6 @@
 #include <linux/slab.h>
 #include <linux/mempool.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index 6f33d33cc064..27d44332f017 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c
index 466e2d22d256..258daa80ad92 100644
--- a/net/wanrouter/wanmain.c
+++ b/net/wanrouter/wanmain.c
@@ -48,6 +48,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>       /* support for loadable modules */
 #include <linux/slab.h>         /* kmalloc(), kfree() */
+#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/string.h>       /* inline mem*, str* functions */
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 43bdb1372cae..634496b3ed77 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -997,7 +997,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
         if (IS_ERR(hdr)) {
                 err = PTR_ERR(hdr);
-                goto out;
+                goto free_msg;
         }
 
         cookie.msg = msg;
@@ -1011,7 +1011,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
                                 &cookie, get_key_callback);
 
         if (err)
-                goto out;
+                goto free_msg;
 
         if (cookie.error)
                 goto nla_put_failure;
@@ -1022,6 +1022,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
  nla_put_failure:
         err = -ENOBUFS;
+ free_msg:
         nlmsg_free(msg);
  out:
         cfg80211_put_dev(drv);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index f8e71b300001..9271118e1fc4 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -35,8 +35,6 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
         else
                 nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
 
-        wiphy_to_dev(request->wiphy)->scan_req = NULL;
-
 #ifdef CONFIG_WIRELESS_EXT
         if (!aborted) {
                 memset(&wrqu, 0, sizeof(wrqu));
@@ -48,6 +46,7 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
         dev_put(dev);
 
  out:
+        wiphy_to_dev(request->wiphy)->scan_req = NULL;
         kfree(request);
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 21cdc872004e..5e6c072c64d3 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -40,6 +40,7 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/string.h>
 #include <linux/net.h>
diff --git a/samples/trace_events/trace-events-sample.h b/samples/trace_events/trace-events-sample.h
index 9977a756fb32..f24ae370e514 100644
--- a/samples/trace_events/trace-events-sample.h
+++ b/samples/trace_events/trace-events-sample.h
@@ -1,21 +1,4 @@
 /*
- * Notice that this file is not protected like a normal header.
- * We also must allow for rereading of this file. The
- *
- *  || defined(TRACE_HEADER_MULTI_READ)
- *
- * serves this purpose.
- */
-#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_EVENT_SAMPLE_H
-
-/*
- * All trace headers should include tracepoint.h, until we finally
- * make it into a standard header.
- */
-#include <linux/tracepoint.h>
-
-/*
  * If TRACE_SYSTEM is defined, that will be the directory created
  * in the ftrace directory under /debugfs/tracing/events/<system>
  *
@@ -34,11 +17,31 @@
  * #define TRACE_INCLUDE_FILE trace-events-sample
  *
  * As we do an the bottom of this file.
+ *
+ * Notice that TRACE_SYSTEM should be defined outside of #if
+ * protection, just like TRACE_INCLUDE_FILE.
  */
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM sample
 
 /*
+ * Notice that this file is not protected like a normal header.
+ * We also must allow for rereading of this file. The
+ *
+ *  || defined(TRACE_HEADER_MULTI_READ)
+ *
+ * serves this purpose.
+ */
+#if !defined(_TRACE_EVENT_SAMPLE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EVENT_SAMPLE_H
+
+/*
+ * All trace headers should include tracepoint.h, until we finally
+ * make it into a standard header.
+ */
+#include <linux/tracepoint.h>
+
+/*
  * The TRACE_EVENT macro is broken up into 5 parts.
  *
  * name: name of the trace point. This is also how to enable the tracepoint.
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 3e733146cd51..278a45bd45a5 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -27,6 +27,7 @@ my $email_git = 1;
 my $email_git_penguin_chiefs = 0;
 my $email_git_min_signatures = 1;
 my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
 my $email_git_since = "1-year-ago";
 my $output_multiline = 1;
 my $output_separator = ", ";
@@ -65,6 +66,7 @@ if (!GetOptions(
                 'git-chief-penguins!' => \$email_git_penguin_chiefs,
                 'git-min-signatures=i' => \$email_git_min_signatures,
                 'git-max-maintainers=i' => \$email_git_max_maintainers,
+                'git-min-percent=i' => \$email_git_min_percent,
                 'git-since=s' => \$email_git_since,
                 'm!' => \$email_maintainer,
                 'n!' => \$email_usename,
@@ -132,6 +134,10 @@ while (<MAINT>) {
             $value =~ s@\.@\\\.@g;       ##Convert . to \.
             $value =~ s/\*/\.\*/g;       ##Convert * to .*
             $value =~ s/\?/\./g;         ##Convert ? to .
+            ##if pattern is a directory and it lacks a trailing slash, add one
+            if ((-d $value)) {
+                $value =~ s@([^/])$@$1/@;
+            }
         }
         push(@typevalue, "$type:$value");
     } elsif (!/^(\s)*$/) {
@@ -146,8 +152,10 @@ close(MAINT);
 my @files = ();
 
 foreach my $file (@ARGV) {
-    next if ((-d $file));
-    if (!(-f $file)) {
+    ##if $file is a directory and it lacks a trailing slash, add one
+    if ((-d $file)) {
+        $file =~ s@([^/])$@$1/@;
+    } elsif (!(-f $file)) {
         die "$P: file '${file}' not found\n";
     }
     if ($from_filename) {
@@ -292,7 +300,7 @@ sub file_match_pattern {
 sub usage {
     print <<EOT;
 usage: $P [options] patchfile
-       $P [options] -f file
+       $P [options] -f file|directory
 version: $V
 
 MAINTAINER field selection options:
@@ -301,6 +309,7 @@ MAINTAINER field selection options:
     --git-chief-penguins => include ${penguin_chiefs}
     --git-min-signatures => number of signatures required (default: 1)
     --git-max-maintainers => maximum maintainers to add (default: 5)
+    --git-min-percent => minimum percentage of commits required (default: 5)
     --git-since => git history to use (default: 1-year-ago)
     --m => include maintainer(s) if any
     --n => include name 'Full Name <addr\@domain.tld>'
@@ -322,6 +331,15 @@ Other options:
   --version => show version
   --help => show this help information
 
+Notes:
+  Using "-f directory" may give unexpected results:
+
+  Used with "--git", git signators for _all_ files in and below
+     directory are examined as git recurses directories.
+     Any specified X: (exclude) pattern matches are _not_ ignored.
+  Used with "--nogit", directory is used as a pattern match,
+     no individual file within the directory or subdirectory
+     is matched.
 EOT
 }
 
@@ -482,6 +500,7 @@ sub recent_git_signoffs {
     my $output = "";
     my $count = 0;
     my @lines = ();
+    my $total_sign_offs;
 
     if (which("git") eq "") {
         warn("$P: git not found.  Add --nogit to options?\n");
@@ -505,17 +524,26 @@ sub recent_git_signoffs {
     $output =~ s/^\s*//gm;
 
     @lines = split("\n", $output);
+
+    $total_sign_offs = 0;
+    foreach my $line (@lines) {
+        if ($line =~ m/([0-9]+)\s+(.*)/) {
+            $total_sign_offs += $1;
+        } else {
+            die("$P: Unexpected git output: ${line}\n");
+        }
+    }
+
     foreach my $line (@lines) {
         if ($line =~ m/([0-9]+)\s+(.*)/) {
             my $sign_offs = $1;
             $line = $2;
             $count++;
             if ($sign_offs < $email_git_min_signatures ||
-                $count > $email_git_max_maintainers) {
+                $count > $email_git_max_maintainers ||
+                $sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
                 last;
             }
-        } else {
-            die("$P: Unexpected git output: ${line}\n");
         }
         if ($line =~ m/(.+)<(.+)>/) {
             my $git_name = $1;
diff --git a/scripts/kconfig/lxdialog/util.c b/scripts/kconfig/lxdialog/util.c
index 86d95cca46a7..f2375ad7ebc9 100644
--- a/scripts/kconfig/lxdialog/util.c
+++ b/scripts/kconfig/lxdialog/util.c
@@ -19,6 +19,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <stdarg.h>
+
 #include "dialog.h"
 
 struct dialog_info dlg;
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index 3bcacb4bfd3a..25b60bc117f7 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -888,6 +888,8 @@ int main(int ac, char **av)
                         single_menu_mode = 1;
         }
 
+        initscr();
+
         getyx(stdscr, saved_y, saved_x);
         if (init_dialog(NULL)) {
                 fprintf(stderr, N_("Your display is too small to run Menuconfig!\n"));
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 528492bcba5b..89774011965d 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,6 +1,7 @@
 #!/usr/bin/perl
 
 use File::Basename;
+use Math::BigInt;
 
 # Copyright 2008, Intel Corporation
 #
@@ -172,8 +173,8 @@ while (<STDIN>) {
         parse_x86_regs($line);
 }
 
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
 if ($target eq "0") {
         print "No oops found!\n";
         print "Usage: \n";
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index b19f1f4962e3..8b357b0bd250 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -89,7 +89,7 @@ for script in postinst postrm preinst prerm ; do
 set -e
 
 # Pass maintainer script parameters to hook scripts
-export DEB_MAINT_PARAMS="\$@"
+export DEB_MAINT_PARAMS="\$*"
 
 test -d $debhookdir/$script.d && run-parts --arg="$version" $debhookdir/$script.d
 exit 0
diff --git a/sound/aoa/core/gpio-pmf.c b/sound/aoa/core/gpio-pmf.c
index 5ca2220eac7d..1dd0c28d1fb7 100644
--- a/sound/aoa/core/gpio-pmf.c
+++ b/sound/aoa/core/gpio-pmf.c
@@ -182,6 +182,10 @@ static int pmf_set_notify(struct gpio_runtime *rt,
         if (!old && notify) {
                 irq_client = kzalloc(sizeof(struct pmf_irq_client),
                                      GFP_KERNEL);
+                if (!irq_client) {
+                        err = -ENOMEM;
+                        goto out_unlock;
+                }
                 irq_client->data = notif;
                 irq_client->handler = pmf_handle_notify_irq;
                 irq_client->owner = THIS_MODULE;
diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c
index 108b643229ba..6205f37d547c 100644
--- a/sound/arm/pxa2xx-pcm-lib.c
+++ b/sound/arm/pxa2xx-pcm-lib.c
@@ -75,7 +75,7 @@ int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream)
 {
         struct pxa2xx_runtime_data *rtd = substream->runtime->private_data;
 
-        if (rtd && rtd->params)
+        if (rtd && rtd->params && rtd->params->drcmr)
                 *rtd->params->drcmr = 0;
 
         snd_pcm_set_runtime_buffer(substream, NULL);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 333e4dd29450..72cfd47af6b8 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -233,6 +233,18 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
                 xrun(substream);
                 return -EPIPE;
         }
+        if (xrun_debug(substream, 8)) {
+                char name[16];
+                pcm_debug_name(substream, name, sizeof(name));
+                snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
+                           "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+                           name, (unsigned int)pos,
+                           (unsigned int)runtime->period_size,
+                           (unsigned int)runtime->buffer_size,
+                           (unsigned long)old_hw_ptr,
+                           (unsigned long)runtime->hw_ptr_base,
+                           (unsigned long)runtime->hw_ptr_interrupt);
+        }
         hw_base = runtime->hw_ptr_base;
         new_hw_ptr = hw_base + pos;
         hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
@@ -244,18 +256,27 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
                         delta = new_hw_ptr - hw_ptr_interrupt;
         }
         if (delta < 0) {
-                delta += runtime->buffer_size;
+                if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
+                        delta += runtime->buffer_size;
                 if (delta < 0) {
                         hw_ptr_error(substream, 
                                      "Unexpected hw_pointer value "
                                      "(stream=%i, pos=%ld, intr_ptr=%ld)\n",
                                      substream->stream, (long)pos,
                                      (long)hw_ptr_interrupt);
+#if 1
+                        /* simply skipping the hwptr update seems more
+                         * robust in some cases, e.g. on VMware with
+                         * inaccurate timer source
+                         */
+                        return 0; /* skip this update */
+#else
                         /* rebase to interrupt position */
                         hw_base = new_hw_ptr = hw_ptr_interrupt;
                         /* align hw_base to buffer_size */
                         hw_base -= hw_base % runtime->buffer_size;
                         delta = 0;
+#endif
                 } else {
                         hw_base += runtime->buffer_size;
                         if (hw_base >= runtime->boundary)
@@ -344,6 +365,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
                 xrun(substream);
                 return -EPIPE;
         }
+        if (xrun_debug(substream, 16)) {
+                char name[16];
+                pcm_debug_name(substream, name, sizeof(name));
+                snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
+                           "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+                           name, (unsigned int)pos,
+                           (unsigned int)runtime->period_size,
+                           (unsigned int)runtime->buffer_size,
+                           (unsigned long)old_hw_ptr,
+                           (unsigned long)runtime->hw_ptr_base,
+                           (unsigned long)runtime->hw_ptr_interrupt);
+        }
+
         hw_base = runtime->hw_ptr_base;
         new_hw_ptr = hw_base + pos;
 
diff --git a/sound/core/seq/Makefile b/sound/core/seq/Makefile
index 1bcb360330e5..941f64a853eb 100644
--- a/sound/core/seq/Makefile
+++ b/sound/core/seq/Makefile
@@ -3,10 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
 #
 
-ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-  obj-$(CONFIG_SND_SEQUENCER) += oss/
-endif
-
 snd-seq-device-objs := seq_device.o
 snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
                 seq_fifo.o seq_prioq.o seq_timer.o \
@@ -19,7 +15,8 @@ snd-seq-virmidi-objs := seq_virmidi.o
 
 obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
 ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+  obj-$(CONFIG_SND_SEQUENCER) += snd-seq-midi-event.o
+  obj-$(CONFIG_SND_SEQUENCER) += oss/
 endif
 obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
 
diff --git a/sound/isa/gus/gus_pcm.c b/sound/isa/gus/gus_pcm.c
index edb11eefdfe3..2dcf45bf7293 100644
--- a/sound/isa/gus/gus_pcm.c
+++ b/sound/isa/gus/gus_pcm.c
@@ -795,13 +795,13 @@ static int snd_gf1_pcm_volume_put(struct snd_kcontrol *kcontrol, struct snd_ctl_
                 if (!(pcmp->flags & SNDRV_GF1_PCM_PFLG_ACTIVE))
                         continue;
                 /* load real volume - better precision */
-                spin_lock_irqsave(&gus->reg_lock, flags);
+                spin_lock(&gus->reg_lock);
                 snd_gf1_select_voice(gus, pvoice->number);
                 snd_gf1_ctrl_stop(gus, SNDRV_GF1_VB_VOLUME_CONTROL);
                 vol = pvoice == pcmp->pvoices[0] ? gus->gf1.pcm_volume_level_left : gus->gf1.pcm_volume_level_right;
                 snd_gf1_write16(gus, SNDRV_GF1_VW_VOLUME, vol);
                 pcmp->final_volume = 1;
-                spin_unlock_irqrestore(&gus->reg_lock, flags);
+                spin_unlock(&gus->reg_lock);
         }
         spin_unlock_irqrestore(&gus->voice_alloc, flags);
         return change;
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
index 3ee9900ffd7b..35b5912cf3f8 100644
--- a/sound/oss/aedsp16.c
+++ b/sound/oss/aedsp16.c
@@ -325,8 +325,9 @@
 /*
  * Size of character arrays that store name and version of sound card
  */
-#define CARDNAMELEN 15          /* Size of the card's name in chars     */
-#define CARDVERLEN  2           /* Size of the card's version in chars  */
+#define CARDNAMELEN     15      /* Size of the card's name in chars     */
+#define CARDVERLEN      10      /* Size of the card's version in chars  */
+#define CARDVERDIGITS   2       /* Number of digits in the version      */
 
 #if defined(CONFIG_SC6600)
 /*
@@ -410,7 +411,7 @@
 
 static int      soft_cfg __initdata = 0;        /* bitmapped config */
 static int      soft_cfg_mss __initdata = 0;    /* bitmapped mss config */
-static int      ver[CARDVERLEN] __initdata = {0, 0};    /* DSP Ver:
+static int      ver[CARDVERDIGITS] __initdata = {0, 0}; /* DSP Ver:
                                                    hi->ver[0] lo->ver[1] */
 
 #if defined(CONFIG_SC6600)
@@ -957,7 +958,7 @@ static int __init aedsp16_dsp_version(int port)
          * string is finished.
          */
                 ver[len++] = ret;
-          } while (len < CARDVERLEN);
+          } while (len < CARDVERDIGITS);
         sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
 
         DBG(("success.\n"));
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 1b2316f35b1f..734b8f9e2f78 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -1074,7 +1074,7 @@ int attach_mpu401(struct address_info *hw_config, struct module *owner)
                         sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
                 else
                         sprintf(mpu_synth_info[m].name,
-                                "MPU-401 %d.%d%c Midi interface #%d",
+                                "MPU-401 %d.%d%c MIDI #%d",
                                 (int) (devc->version & 0xf0) >> 4,
                                 devc->version & 0x0f,
                                 revision_char,
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index f24bf1ecb36d..15e4138bce17 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -325,9 +325,9 @@ static struct snd_pcm_hardware snd_ca0106_capture_hw = {
         .rate_max =             192000,
         .channels_min =         2,
         .channels_max =         2,
-        .buffer_bytes_max =     ((65536 - 64) * 8),
+        .buffer_bytes_max =     65536 - 128,
         .period_bytes_min =     64,
-        .period_bytes_max =     (65536 - 64),
+        .period_bytes_max =     32768 - 64,
         .periods_min =          2,
         .periods_max =          2,
         .fifo_size =            0,
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
index a1db51b3ead8..a7f4a671f7b7 100644
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -242,13 +242,12 @@ static int get_amixer_rsc(struct amixer_mgr *mgr,
 
         /* Allocate mem for amixer resource */
         amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
-        if (NULL == amixer) {
-                err = -ENOMEM;
-                return err;
-        }
+        if (!amixer)
+                return -ENOMEM;
 
         /* Check whether there are sufficient
          * amixer resources to meet request. */
+        err = 0;
         spin_lock_irqsave(&mgr->mgr_lock, flags);
         for (i = 0; i < desc->msr; i++) {
                 err = mgr_get_resource(&mgr->mgr, 1, &idx);
@@ -397,12 +396,11 @@ static int get_sum_rsc(struct sum_mgr *mgr,
 
         /* Allocate mem for sum resource */
         sum = kzalloc(sizeof(*sum), GFP_KERNEL);
-        if (NULL == sum) {
-                err = -ENOMEM;
-                return err;
-        }
+        if (!sum)
+                return -ENOMEM;
 
         /* Check whether there are sufficient sum resources to meet request. */
+        err = 0;
         spin_lock_irqsave(&mgr->mgr_lock, flags);
         for (i = 0; i < desc->msr; i++) {
                 err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
index 082e35c08c02..deb6cfa73600 100644
--- a/sound/pci/ctxfi/ctdaio.c
+++ b/sound/pci/ctxfi/ctdaio.c
@@ -57,9 +57,9 @@ struct daio_rsc_idx idx_20k1[NUM_DAIOTYP] = {
 
 struct daio_rsc_idx idx_20k2[NUM_DAIOTYP] = {
         [LINEO1] = {.left = 0x40, .right = 0x41},
-        [LINEO2] = {.left = 0x70, .right = 0x71},
+        [LINEO2] = {.left = 0x60, .right = 0x61},
         [LINEO3] = {.left = 0x50, .right = 0x51},
-        [LINEO4] = {.left = 0x60, .right = 0x61},
+        [LINEO4] = {.left = 0x70, .right = 0x71},
         [LINEIM] = {.left = 0x45, .right = 0xc5},
         [SPDIFOO] = {.left = 0x00, .right = 0x01},
         [SPDIFIO] = {.left = 0x05, .right = 0x85},
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index e1c145d8b702..df43a5cd3938 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -724,12 +724,11 @@ static int get_srcimp_rsc(struct srcimp_mgr *mgr,
 
         /* Allocate mem for SRCIMP resource */
         srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
-        if (NULL == srcimp) {
-                err = -ENOMEM;
-                return err;
-        }
+        if (!srcimp)
+                return -ENOMEM;
 
         /* Check whether there are sufficient SRCIMP resources. */
+        err = 0;
         spin_lock_irqsave(&mgr->mgr_lock, flags);
         for (i = 0; i < desc->msr; i++) {
                 err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 26d255de6beb..88480c0c58a0 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -332,6 +332,12 @@ int snd_hda_get_connections(struct hda_codec *codec, hda_nid_t nid,
                                                   AC_VERB_GET_CONNECT_LIST, i);
                 range_val = !!(parm & (1 << (shift-1))); /* ranges */
                 val = parm & mask;
+                if (val == 0) {
+                        snd_printk(KERN_WARNING "hda_codec: "
+                                   "invalid CONNECT_LIST verb %x[%i]:%x\n",
+                                    nid, i, parm);
+                        return 0;
+                }
                 parm >>= shift;
                 if (range_val) {
                         /* ranges between the previous and this one */
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index fcad5ec31773..9446a5abea13 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -508,7 +508,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
         char name[64];
         char *sname;
         long long val;
-        int n;
+        unsigned int n;
 
         while (!snd_info_get_line(buffer, line, sizeof(line))) {
                 if (sscanf(line, "%s %llx", name, &val) != 2)
@@ -539,7 +539,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
                                 sname++;
                                 n = 10 * n + name[4] - '0';
                         }
-                        if (n < 0 || n > 31) /* double the CEA limit */
+                        if (n >= ELD_MAX_SAD)
                                 continue;
                         if (!strcmp(sname, "_coding_type"))
                                 e->sad[n].format = val;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index be7d25fa7f35..3da85caf8af1 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3754,7 +3754,7 @@ static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
         int mute = (!ucontrol->value.integer.value[0] &&
                     !ucontrol->value.integer.value[1]);
         /* toggle GPIO1 according to the mute state */
-        snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+        snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
                             mute ? 0x02 : 0x0);
         return ret;
 }
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bbb9b42e2604..b95df5d5dcc2 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,13 +275,13 @@ struct alc_spec {
                                                  */
         unsigned int num_init_verbs;
 
-        char stream_name_analog[16];    /* analog PCM stream */
+        char stream_name_analog[32];    /* analog PCM stream */
         struct hda_pcm_stream *stream_analog_playback;
         struct hda_pcm_stream *stream_analog_capture;
         struct hda_pcm_stream *stream_analog_alt_playback;
         struct hda_pcm_stream *stream_analog_alt_capture;
 
-        char stream_name_digital[16];   /* digital PCM stream */
+        char stream_name_digital[32];   /* digital PCM stream */
         struct hda_pcm_stream *stream_digital_playback;
         struct hda_pcm_stream *stream_digital_capture;
 
@@ -4505,6 +4505,12 @@ static int alc880_parse_auto_config(struct hda_codec *codec)
                                               &dig_nid, 1);
                 if (err < 0)
                         continue;
+                if (dig_nid > 0x7f) {
+                        printk(KERN_ERR "alc880_auto: invalid dig_nid "
+                                "connection 0x%x for NID 0x%x\n", dig_nid,
+                                spec->autocfg.dig_out_pins[i]);
+                        continue;
+                }
                 if (!i)
                         spec->multiout.dig_out_nid = dig_nid;
                 else {
@@ -10625,6 +10631,18 @@ static void alc262_lenovo_3000_unsol_event(struct hda_codec *codec,
         alc262_lenovo_3000_automute(codec, 1);
 }
 
+static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid,
+                                  int dir, int idx, long *valp)
+{
+        int i, change = 0;
+
+        for (i = 0; i < 2; i++, valp++)
+                change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx,
+                                                   HDA_AMP_MUTE,
+                                                   *valp ? 0 : HDA_AMP_MUTE);
+        return change;
+}
+
 /* bind hp and internal speaker mute (with plug check) */
 static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
                                          struct snd_ctl_elem_value *ucontrol)
@@ -10633,13 +10651,8 @@ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
         long *valp = ucontrol->value.integer.value;
         int change;
 
-        change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-                                                 HDA_AMP_MUTE,
-                                                 valp ? 0 : HDA_AMP_MUTE);
-        change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-                                                 HDA_AMP_MUTE,
-                                                 valp ? 0 : HDA_AMP_MUTE);
-
+        change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
+        change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
         if (change)
                 alc262_fujitsu_automute(codec, 0);
         return change;
@@ -10674,10 +10687,7 @@ static int alc262_lenovo_3000_master_sw_put(struct snd_kcontrol *kcontrol,
         long *valp = ucontrol->value.integer.value;
         int change;
 
-        change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-                                                 HDA_AMP_MUTE,
-                                                 valp ? 0 : HDA_AMP_MUTE);
-
+        change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
         if (change)
                 alc262_lenovo_3000_automute(codec, 0);
         return change;
@@ -11848,12 +11858,7 @@ static int alc268_acer_master_sw_put(struct snd_kcontrol *kcontrol,
         long *valp = ucontrol->value.integer.value;
         int change;
 
-        change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
-                                          HDA_AMP_MUTE,
-                                          valp[0] ? 0 : HDA_AMP_MUTE);
-        change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
-                                           HDA_AMP_MUTE,
-                                           valp[1] ? 0 : HDA_AMP_MUTE);
+        change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
         if (change)
                 alc268_acer_automute(codec, 0);
         return change;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 41b5b3a18c1e..5383d8cff88b 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1809,6 +1809,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
                                 "Dell Studio 1537", STAC_DELL_M6_DMIC),
         SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
                                 "Dell Studio 17", STAC_DELL_M6_DMIC),
+        SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
+                                "Dell Studio 1555", STAC_DELL_M6_DMIC),
         {} /* terminator */
 };
 
@@ -2378,6 +2380,7 @@ static struct snd_pci_quirk stac9205_cfg_tbl[] = {
         SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0228,
                       "Dell Vostro 1500", STAC_9205_DELL_M42),
         /* Gateway */
+        SND_PCI_QUIRK(0x107b, 0x0560, "Gateway T6834c", STAC_9205_EAPD),
         SND_PCI_QUIRK(0x107b, 0x0565, "Gateway T1616", STAC_9205_EAPD),
         {} /* terminator */
 };
@@ -4065,7 +4068,7 @@ static int stac92xx_add_jack(struct hda_codec *codec,
         jack->nid = nid;
         jack->type = type;
 
-        sprintf(name, "%s at %s %s Jack",
+        snprintf(name, sizeof(name), "%s at %s %s Jack",
                 snd_hda_get_jack_type(def_conf),
                 snd_hda_get_jack_connectivity(def_conf),
                 snd_hda_get_jack_location(def_conf));
@@ -5854,6 +5857,8 @@ static unsigned int *stac9872_brd_tbl[STAC_9872_MODELS] = {
 };
 
 static struct snd_pci_quirk stac9872_cfg_tbl[] = {
+        SND_PCI_QUIRK_MASK(0x104d, 0xfff0, 0x81e0,
+                           "Sony VAIO F/S", STAC_9872_VAIO),
         {} /* terminator */
 };
 
@@ -5866,6 +5871,8 @@ static int patch_stac9872(struct hda_codec *codec)
         if (spec == NULL)
                 return -ENOMEM;
         codec->spec = spec;
+        spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
+        spec->pin_nids = stac9872_pin_nids;
 
         spec->board_config = snd_hda_check_board_config(codec, STAC_9872_MODELS,
                                                         stac9872_models,
@@ -5877,8 +5884,6 @@ static int patch_stac9872(struct hda_codec *codec)
                 stac92xx_set_config_regs(codec,
                                          stac9872_brd_tbl[spec->board_config]);
 
-        spec->num_pins = ARRAY_SIZE(stac9872_pin_nids);
-        spec->pin_nids = stac9872_pin_nids;
         spec->multiout.dac_nids = spec->dac_nids;
         spec->num_adcs = ARRAY_SIZE(stac9872_adc_nids);
         spec->adc_nids = stac9872_adc_nids;
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 235a71e5ac8d..b5ca02e2038c 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2197,9 +2197,12 @@ static int __init alsa_card_riptide_init(void)
         if (err < 0)
                 return err;
 #if defined(SUPPORT_JOYSTICK)
-        pci_register_driver(&joystick_driver);
+        err = pci_register_driver(&joystick_driver);
+        /* On failure unregister formerly registered audio driver */
+        if (err < 0)
+                pci_unregister_driver(&driver);
 #endif
-        return 0;
+        return err;
 }
 
 static void __exit alsa_card_riptide_exit(void)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index ab099f482487..cb0d1bf34b57 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -767,6 +767,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
         int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
         u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
         u16 pll_d = 1;
+        u8 reg;
 
         /* select data word length */
         data =
@@ -801,8 +802,16 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
                 pll_q &= 0xf;
                 aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
                 aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
-        } else
+                /* disable PLL if it is bypassed */
+                reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+                aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
+
+        } else {
                 aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
+                /* enable PLL when it is used */
+                reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+                aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
+        }
 
         /* Route Left DAC to left channel input and
          * right DAC to right channel input */
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index c05f71803aa8..8c0fdf84aac3 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -1037,14 +1037,14 @@ static int __devinit wm8988_spi_probe(struct spi_device *spi)
         codec->control_data = spi;
         codec->dev = &spi->dev;
 
-        spi->dev.driver_data = wm8988;
+        dev_set_drvdata(&spi->dev, wm8988);
 
         return wm8988_register(wm8988);
 }
 
 static int __devexit wm8988_spi_remove(struct spi_device *spi)
 {
-        struct wm8988_priv *wm8988 = spi->dev.driver_data;
+        struct wm8988_priv *wm8988 = dev_get_drvdata(&spi->dev);
 
         wm8988_unregister(wm8988);
 
diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h
index a96dcadf28b4..e96f941a810b 100644
--- a/sound/soc/s3c24xx/s3c24xx-ac97.h
+++ b/sound/soc/s3c24xx/s3c24xx-ac97.h
@@ -20,12 +20,6 @@
 #define AC_CMD_ADDR(x) (x << 16)
 #define AC_CMD_DATA(x) (x & 0xffff)
 
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
-#endif
-
 extern struct snd_soc_dai s3c2443_ac97_dai[];
 
 #endif /*S3C24XXAC97_H_*/
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 523aec188ccf..73525c048e7f 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -48,6 +48,7 @@ config SND_USB_CAIAQ
             * Native Instruments Kore Controller
             * Native Instruments Kore Controller 2
             * Native Instruments Audio Kontrol 1
+            * Native Instruments Audio 2 DJ
             * Native Instruments Audio 4 DJ
             * Native Instruments Audio 8 DJ
             * Native Instruments Guitar Rig Session I/O
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 8f9b60c5d74c..121af0644fd9 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -646,6 +646,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
         case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
                 dev->samplerates |= SNDRV_PCM_RATE_192000;
                 /* fall thru */
+        case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ):
         case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
         case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
                 dev->samplerates |= SNDRV_PCM_RATE_88200;
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index de38108f0b28..83e6c1312d47 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,13 +35,14 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
                          "{Native Instruments, RigKontrol3},"
                          "{Native Instruments, Kore Controller},"
                          "{Native Instruments, Kore Controller 2},"
                          "{Native Instruments, Audio Kontrol 1},"
+                         "{Native Instruments, Audio 2 DJ},"
                          "{Native Instruments, Audio 4 DJ},"
                          "{Native Instruments, Audio 8 DJ},"
                          "{Native Instruments, Session I/O},"
@@ -121,6 +122,11 @@ static struct usb_device_id snd_usb_id_table[] = {
                 .idVendor =     USB_VID_NATIVEINSTRUMENTS,
                 .idProduct =    USB_PID_AUDIO4DJ
         },
+        {
+                .match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+                .idVendor =     USB_VID_NATIVEINSTRUMENTS,
+                .idProduct =    USB_PID_AUDIO2DJ
+        },
         { /* terminator */ }
 };
 
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index ece73514854e..44e3edf88bef 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -10,6 +10,7 @@
 #define USB_PID_KORECONTROLLER  0x4711
 #define USB_PID_KORECONTROLLER2 0x4712
 #define USB_PID_AK1             0x0815
+#define USB_PID_AUDIO2DJ        0x041c
 #define USB_PID_AUDIO4DJ        0x0839
 #define USB_PID_AUDIO8DJ        0x1978
 #define USB_PID_SESSIONIO       0x1915
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index c7b902358b7b..44b9cdc8a83b 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2661,7 +2661,7 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
         struct usb_interface_descriptor *altsd;
         int i, altno, err, stream;
         int format;
-        struct audioformat *fp;
+        struct audioformat *fp = NULL;
         unsigned char *fmt, *csep;
         int num;
 
@@ -2734,6 +2734,18 @@ static int parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
                         continue;
                 }
 
+                /*
+                 * Blue Microphones workaround: The last altsetting is identical
+                 * with the previous one, except for a larger packet size, but
+                 * is actually a mislabeled two-channel setting; ignore it.
+                 */
+                if (fmt[4] == 1 && fmt[5] == 2 && altno == 2 && num == 3 &&
+                    fp && fp->altsetting == 1 && fp->channels == 1 &&
+                    fp->format == SNDRV_PCM_FORMAT_S16_LE &&
+                    le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) ==
+                                                        fp->maxpacksize * 2)
+                        continue;
+
                 csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT);
                 /* Creamware Noah has this descriptor after the 2nd endpoint */
                 if (!csep && altsd->bNumEndpoints >= 2)
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 4bd3a7a0edc1..ec9cdf986928 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -990,20 +990,35 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
                 break;
         }
 
-        /* quirk for UDA1321/N101 */
-        /* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
-        /* is not very clear from datasheets */
-        /* I hope that the min value is -15360 for newer firmware --jk */
+        /* volume control quirks */
         switch (state->chip->usb_id) {
         case USB_ID(0x0471, 0x0101):
         case USB_ID(0x0471, 0x0104):
         case USB_ID(0x0471, 0x0105):
         case USB_ID(0x0672, 0x1041):
+        /* quirk for UDA1321/N101.
+         * note that detection between firmware 2.1.1.7 (N101)
+         * and later 2.1.1.21 is not very clear from datasheets.
+         * I hope that the min value is -15360 for newer firmware --jk
+         */
                 if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
                     cval->min == -15616) {
-                        snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
+                        snd_printk(KERN_INFO
+                                 "set volume quirk for UDA1321/N101 chip\n");
                         cval->max = -256;
                 }
+                break;
+
+        case USB_ID(0x046d, 0x09a4):
+                if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+                        snd_printk(KERN_INFO
+                                "set volume quirk for QuickCam E3500\n");
+                        cval->min = 6080;
+                        cval->max = 8768;
+                        cval->res = 192;
+                }
+                break;
+
         }
 
         snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 8aa3f8c88707..e72e93110782 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -24,6 +24,9 @@ OPTIONS
 --dsos=::
         Only consider symbols in these dsos. CSV that understands
         file://filename entries.
+-n
+--show-nr-samples
+        Show the number of samples for each symbol
 -C::
 --comms=::
         Only consider symbols in these comms. CSV that understands
@@ -33,6 +36,18 @@ OPTIONS
         Only consider these symbols. CSV that understands
         file://filename entries.
 
+-w::
+--field-width=::
+        Force each column width to the provided list, for large terminal
+        readability.
+
+-t::
+--field-separator=::
+
+        Use a special separator character and don't pad with spaces, replacing
+        all occurances of this separator in symbol names (and other output)
+        with a '.' character, that thus it's the only non valid separator.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 7822b3d6baca..a5e9b876ca09 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -345,7 +345,7 @@ BUILTIN_OBJS += builtin-stat.o
 BUILTIN_OBJS += builtin-top.o
 
 PERFLIBS = $(LIB_FILE)
-EXTLIBS =
+EXTLIBS = -lbfd
 
 #
 # Platform specific tweaks
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 5f9eefecc574..1dba568e1941 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -74,20 +74,12 @@ struct fork_event {
         u32 pid, ppid;
 };
 
-struct period_event {
-        struct perf_event_header header;
-        u64 time;
-        u64 id;
-        u64 sample_period;
-};
-
 typedef union event_union {
         struct perf_event_header        header;
         struct ip_event                 ip;
         struct mmap_event               mmap;
         struct comm_event               comm;
         struct fork_event               fork;
-        struct period_event             period;
 } event_t;
 
 
@@ -998,19 +990,6 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
-        dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
-                (void *)(offset + head),
-                (void *)(long)(event->header.size),
-                event->period.time,
-                event->period.id,
-                event->period.sample_period);
-
-        return 0;
-}
-
-static int
 process_event(event_t *event, unsigned long offset, unsigned long head)
 {
         switch (event->header.type) {
@@ -1025,9 +1004,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
 
         case PERF_EVENT_FORK:
                 return process_fork_event(event, offset, head);
-
-        case PERF_EVENT_PERIOD:
-                return process_period_event(event, offset, head);
         /*
          * We dont process them right now but they are fine:
          */
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 4ef78a5e6f32..6da09928130f 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -43,6 +43,7 @@ static int			call_graph			= 0;
 static int                      verbose                         = 0;
 static int                      inherit_stat                    = 0;
 static int                      no_samples                      = 0;
+static int                      sample_address                  = 0;
 
 static long                     samples;
 static struct timeval           last_read;
@@ -313,6 +314,10 @@ static void pid_synthesize_mmap_samples(pid_t pid)
                 if (*pbf == 'x') { /* vm_exec */
                         char *execname = strchr(bf, '/');
 
+                        /* Catch VDSO */
+                        if (execname == NULL)
+                                execname = strstr(bf, "[vdso]");
+
                         if (execname == NULL)
                                 continue;
 
@@ -401,6 +406,9 @@ static void create_counter(int counter, int cpu, pid_t pid)
         if (inherit_stat)
                 attr->inherit_stat = 1;
 
+        if (sample_address)
+                attr->sample_type       |= PERF_SAMPLE_ADDR;
+
         if (call_graph)
                 attr->sample_type       |= PERF_SAMPLE_CALLCHAIN;
 
@@ -645,6 +653,8 @@ static const struct option options[] = {
                     "be more verbose (show counter open errors, etc)"),
         OPT_BOOLEAN('s', "stat", &inherit_stat,
                     "per thread counts"),
+        OPT_BOOLEAN('d', "data", &sample_address,
+                    "Sample addresses"),
         OPT_BOOLEAN('n', "no-samples", &no_samples,
                     "don't sample"),
         OPT_END()
@@ -654,7 +664,8 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 {
         int counter;
 
-        argc = parse_options(argc, argv, options, record_usage, 0);
+        argc = parse_options(argc, argv, options, record_usage,
+                PARSE_OPT_STOP_AT_NON_OPTION);
         if (!argc && target_pid == -1 && !system_wide)
                 usage_with_options(record_usage, options);
 
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 4e5cc266311e..b20a4b6e31b7 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -33,8 +33,10 @@ static char		*vmlinux = NULL;
 
 static char             default_sort_order[] = "comm,dso";
 static char             *sort_order = default_sort_order;
-static char             *dso_list_str, *comm_list_str, *sym_list_str;
+static char             *dso_list_str, *comm_list_str, *sym_list_str,
+                        *col_width_list_str;
 static struct strlist   *dso_list, *comm_list, *sym_list;
+static char             *field_sep;
 
 static int              input;
 static int              show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
@@ -49,6 +51,7 @@ static int		verbose;
 static int              modules;
 
 static int              full_paths;
+static int              show_nr_samples;
 
 static unsigned long    page_size;
 static unsigned long    mmap_window = 32;
@@ -98,13 +101,6 @@ struct fork_event {
         u32 pid, ppid;
 };
 
-struct period_event {
-        struct perf_event_header header;
-        u64 time;
-        u64 id;
-        u64 sample_period;
-};
-
 struct lost_event {
         struct perf_event_header header;
         u64 id;
@@ -124,11 +120,37 @@ typedef union event_union {
         struct mmap_event               mmap;
         struct comm_event               comm;
         struct fork_event               fork;
-        struct period_event             period;
         struct lost_event               lost;
         struct read_event               read;
 } event_t;
 
+static int repsep_fprintf(FILE *fp, const char *fmt, ...)
+{
+        int n;
+        va_list ap;
+
+        va_start(ap, fmt);
+        if (!field_sep)
+                n = vfprintf(fp, fmt, ap);
+        else {
+                char *bf = NULL;
+                n = vasprintf(&bf, fmt, ap);
+                if (n > 0) {
+                        char *sep = bf;
+                        while (1) {
+                                sep = strchr(sep, *field_sep);
+                                if (sep == NULL)
+                                        break;
+                                *sep = '.';
+                        }
+                }
+                fputs(bf, fp);
+                free(bf);
+        }
+        va_end(ap);
+        return n;
+}
+
 static LIST_HEAD(dsos);
 static struct dso *kernel_dso;
 static struct dso *vdso;
@@ -360,12 +382,28 @@ static struct thread *thread__new(pid_t pid)
         return self;
 }
 
+static unsigned int dsos__col_width,
+                    comms__col_width,
+                    threads__col_width;
+
 static int thread__set_comm(struct thread *self, const char *comm)
 {
         if (self->comm)
                 free(self->comm);
         self->comm = strdup(comm);
-        return self->comm ? 0 : -ENOMEM;
+        if (!self->comm)
+                return -ENOMEM;
+
+        if (!col_width_list_str && !field_sep &&
+            (!comm_list || strlist__has_entry(comm_list, comm))) {
+                unsigned int slen = strlen(comm);
+                if (slen > comms__col_width) {
+                        comms__col_width = slen;
+                        threads__col_width = slen + 6;
+                }
+        }
+
+        return 0;
 }
 
 static size_t thread__fprintf(struct thread *self, FILE *fp)
@@ -536,7 +574,9 @@ struct sort_entry {
 
         int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
         int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
-        size_t  (*print)(FILE *fp, struct hist_entry *);
+        size_t  (*print)(FILE *fp, struct hist_entry *, unsigned int width);
+        unsigned int *width;
+        bool    elide;
 };
 
 static int64_t cmp_null(void *l, void *r)
@@ -558,15 +598,17 @@ sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self)
+sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-        return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
+        return repsep_fprintf(fp, "%*s:%5d", width - 6,
+                              self->thread->comm ?: "", self->thread->pid);
 }
 
 static struct sort_entry sort_thread = {
-        .header = "         Command:  Pid",
+        .header = "Command:  Pid",
         .cmp    = sort__thread_cmp,
         .print  = sort__thread_print,
+        .width  = &threads__col_width,
 };
 
 /* --sort comm */
@@ -590,16 +632,17 @@ sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self)
+sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-        return fprintf(fp, "%16s", self->thread->comm);
+        return repsep_fprintf(fp, "%*s", width, self->thread->comm);
 }
 
 static struct sort_entry sort_comm = {
-        .header         = "         Command",
+        .header         = "Command",
         .cmp            = sort__comm_cmp,
         .collapse       = sort__comm_collapse,
         .print          = sort__comm_print,
+        .width          = &comms__col_width,
 };
 
 /* --sort dso */
@@ -617,18 +660,19 @@ sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self)
+sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
         if (self->dso)
-                return fprintf(fp, "%-25s", self->dso->name);
+                return repsep_fprintf(fp, "%-*s", width, self->dso->name);
 
-        return fprintf(fp, "%016llx         ", (u64)self->ip);
+        return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
 }
 
 static struct sort_entry sort_dso = {
-        .header = "Shared Object            ",
+        .header = "Shared Object",
         .cmp    = sort__dso_cmp,
         .print  = sort__dso_print,
+        .width  = &dsos__col_width,
 };
 
 /* --sort symbol */
@@ -648,22 +692,22 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self)
+sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
 {
         size_t ret = 0;
 
         if (verbose)
-                ret += fprintf(fp, "%#018llx  ", (u64)self->ip);
+                ret += repsep_fprintf(fp, "%#018llx  ", (u64)self->ip);
 
+        ret += repsep_fprintf(fp, "[%c] ", self->level);
         if (self->sym) {
-                ret += fprintf(fp, "[%c] %s",
-                        self->dso == kernel_dso ? 'k' :
-                        self->dso == hypervisor_dso ? 'h' : '.', self->sym->name);
+                ret += repsep_fprintf(fp, "%s", self->sym->name);
 
                 if (self->sym->module)
-                        ret += fprintf(fp, "\t[%s]", self->sym->module->name);
+                        ret += repsep_fprintf(fp, "\t[%s]",
+                                             self->sym->module->name);
         } else {
-                ret += fprintf(fp, "%#016llx", (u64)self->ip);
+                ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
         }
 
         return ret;
@@ -690,19 +734,19 @@ sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
 }
 
 static size_t
-sort__parent_print(FILE *fp, struct hist_entry *self)
+sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
 {
-        size_t ret = 0;
-
-        ret += fprintf(fp, "%-20s", self->parent ? self->parent->name : "[other]");
-
-        return ret;
+        return repsep_fprintf(fp, "%-*s", width,
+                              self->parent ? self->parent->name : "[other]");
 }
 
+static unsigned int parent_symbol__col_width;
+
 static struct sort_entry sort_parent = {
-        .header = "Parent symbol       ",
+        .header = "Parent symbol",
         .cmp    = sort__parent_cmp,
         .print  = sort__parent_print,
+        .width  = &parent_symbol__col_width,
 };
 
 static int sort__need_collapse = 0;
@@ -967,17 +1011,25 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
                 return 0;
 
         if (total_samples)
-                ret = percent_color_fprintf(fp, "   %6.2f%%",
-                                (self->count * 100.0) / total_samples);
+                ret = percent_color_fprintf(fp,
+                                            field_sep ? "%.2f" : "   %6.2f%%",
+                                        (self->count * 100.0) / total_samples);
         else
-                ret = fprintf(fp, "%12Ld ", self->count);
+                ret = fprintf(fp, field_sep ? "%lld" : "%12lld ", self->count);
+
+        if (show_nr_samples) {
+                if (field_sep)
+                        fprintf(fp, "%c%lld", *field_sep, self->count);
+                else
+                        fprintf(fp, "%11lld", self->count);
+        }
 
         list_for_each_entry(se, &hist_entry__sort_list, list) {
-                if (exclude_other && (se == &sort_parent))
+                if (se->elide)
                         continue;
 
-                fprintf(fp, "  ");
-                ret += se->print(fp, self);
+                fprintf(fp, "%s", field_sep ?: "  ");
+                ret += se->print(fp, self, se->width ? *se->width : 0);
         }
 
         ret += fprintf(fp, "\n");
@@ -992,6 +1044,18 @@ hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
  *
  */
 
+static void dso__calc_col_width(struct dso *self)
+{
+        if (!col_width_list_str && !field_sep &&
+            (!dso_list || strlist__has_entry(dso_list, self->name))) {
+                unsigned int slen = strlen(self->name);
+                if (slen > dsos__col_width)
+                        dsos__col_width = slen;
+        }
+
+        self->slen_calculated = 1;
+}
+
 static struct symbol *
 resolve_symbol(struct thread *thread, struct map **mapp,
                struct dso **dsop, u64 *ipp)
@@ -1011,6 +1075,14 @@ resolve_symbol(struct thread *thread, struct map **mapp,
 
         map = thread__find_map(thread, ip);
         if (map != NULL) {
+                /*
+                 * We have to do this here as we may have a dso
+                 * with no symbol hit that has a name longer than
+                 * the ones with symbols sampled.
+                 */
+                if (!sort_dso.elide && !map->dso->slen_calculated)
+                        dso__calc_col_width(map->dso);
+
                 if (mapp)
                         *mapp = map;
 got_map:
@@ -1282,35 +1354,67 @@ static size_t output__fprintf(FILE *fp, u64 total_samples)
         struct sort_entry *se;
         struct rb_node *nd;
         size_t ret = 0;
+        unsigned int width;
+        char *col_width = col_width_list_str;
 
-        fprintf(fp, "\n");
-        fprintf(fp, "#\n");
-        fprintf(fp, "# (%Ld samples)\n", (u64)total_samples);
+        fprintf(fp, "# Samples: %Ld\n", (u64)total_samples);
         fprintf(fp, "#\n");
 
         fprintf(fp, "# Overhead");
+        if (show_nr_samples) {
+                if (field_sep)
+                        fprintf(fp, "%cSamples", *field_sep);
+                else
+                        fputs("  Samples  ", fp);
+        }
         list_for_each_entry(se, &hist_entry__sort_list, list) {
-                if (exclude_other && (se == &sort_parent))
+                if (se->elide)
                         continue;
-                fprintf(fp, "  %s", se->header);
+                if (field_sep) {
+                        fprintf(fp, "%c%s", *field_sep, se->header);
+                        continue;
+                }
+                width = strlen(se->header);
+                if (se->width) {
+                        if (col_width_list_str) {
+                                if (col_width) {
+                                        *se->width = atoi(col_width);
+                                        col_width = strchr(col_width, ',');
+                                        if (col_width)
+                                                ++col_width;
+                                }
+                        }
+                        width = *se->width = max(*se->width, width);
+                }
+                fprintf(fp, "  %*s", width, se->header);
         }
         fprintf(fp, "\n");
 
+        if (field_sep)
+                goto print_entries;
+
         fprintf(fp, "# ........");
+        if (show_nr_samples)
+                fprintf(fp, " ..........");
         list_for_each_entry(se, &hist_entry__sort_list, list) {
                 unsigned int i;
 
-                if (exclude_other && (se == &sort_parent))
+                if (se->elide)
                         continue;
 
                 fprintf(fp, "  ");
-                for (i = 0; i < strlen(se->header); i++)
+                if (se->width)
+                        width = *se->width;
+                else
+                        width = strlen(se->header);
+                for (i = 0; i < width; i++)
                         fprintf(fp, ".");
         }
         fprintf(fp, "\n");
 
         fprintf(fp, "#\n");
 
+print_entries:
         for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
                 pos = rb_entry(nd, struct hist_entry, rb_node);
                 ret += hist_entry__fprintf(fp, pos, total_samples);
@@ -1524,19 +1628,6 @@ process_fork_event(event_t *event, unsigned long offset, unsigned long head)
 }
 
 static int
-process_period_event(event_t *event, unsigned long offset, unsigned long head)
-{
-        dprintf("%p [%p]: PERF_EVENT_PERIOD: time:%Ld, id:%Ld: period:%Ld\n",
-                (void *)(offset + head),
-                (void *)(long)(event->header.size),
-                event->period.time,
-                event->period.id,
-                event->period.sample_period);
-
-        return 0;
-}
-
-static int
 process_lost_event(event_t *event, unsigned long offset, unsigned long head)
 {
         dprintf("%p [%p]: PERF_EVENT_LOST: id:%Ld: lost:%Ld\n",
@@ -1617,9 +1708,6 @@ process_event(event_t *event, unsigned long offset, unsigned long head)
         case PERF_EVENT_FORK:
                 return process_fork_event(event, offset, head);
 
-        case PERF_EVENT_PERIOD:
-                return process_period_event(event, offset, head);
-
         case PERF_EVENT_LOST:
                 return process_lost_event(event, offset, head);
 
@@ -1883,6 +1971,8 @@ static const struct option options[] = {
         OPT_STRING('k', "vmlinux", &vmlinux, "file", "vmlinux pathname"),
         OPT_BOOLEAN('m', "modules", &modules,
                     "load module symbols - WARNING: use only with -k and LIVE kernel"),
+        OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
+                    "Show a column with the number of samples"),
         OPT_STRING('s', "sort", &sort_order, "key[,key2...]",
                    "sort by key(s): pid, comm, dso, symbol, parent"),
         OPT_BOOLEAN('P', "full-paths", &full_paths,
@@ -1891,15 +1981,21 @@ static const struct option options[] = {
                    "regex filter to identify parent, see: '--sort parent'"),
         OPT_BOOLEAN('x', "exclude-other", &exclude_other,
                     "Only display entries with parent-match"),
-        OPT_CALLBACK_DEFAULT('c', "callchain", NULL, "output_type,min_percent",
+        OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent",
                      "Display callchains using output_type and min percent threshold. "
-                     "Default: flat,0", &parse_callchain_opt, callchain_default_opt),
+                     "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt),
         OPT_STRING('d', "dsos", &dso_list_str, "dso[,dso...]",
                    "only consider symbols in these dsos"),
         OPT_STRING('C', "comms", &comm_list_str, "comm[,comm...]",
                    "only consider symbols in these comms"),
         OPT_STRING('S', "symbols", &sym_list_str, "symbol[,symbol...]",
                    "only consider these symbols"),
+        OPT_STRING('w', "column-widths", &col_width_list_str,
+                   "width[,width...]",
+                   "don't try to adjust column width, use these fixed values"),
+        OPT_STRING('t', "field-separator", &field_sep, "separator",
+                   "separator for columns, no spaces will be added between "
+                   "columns '.' is reserved."),
         OPT_END()
 };
 
@@ -1919,7 +2015,8 @@ static void setup_sorting(void)
 }
 
 static void setup_list(struct strlist **list, const char *list_str,
-                       const char *list_name)
+                       struct sort_entry *se, const char *list_name,
+                       FILE *fp)
 {
         if (list_str) {
                 *list = strlist__new(true, list_str);
@@ -1928,6 +2025,11 @@ static void setup_list(struct strlist **list, const char *list_str,
                                 list_name);
                         exit(129);
                 }
+                if (strlist__nr_entries(*list) == 1) {
+                        fprintf(fp, "# %s: %s\n", list_name,
+                                strlist__entry(*list, 0)->s);
+                        se->elide = true;
+                }
         }
 }
 
@@ -1941,9 +2043,10 @@ int cmd_report(int argc, const char **argv, const char *prefix __used)
 
         setup_sorting();
 
-        if (parent_pattern != default_parent_pattern)
+        if (parent_pattern != default_parent_pattern) {
                 sort_dimension__add("parent");
-        else
+                sort_parent.elide = 1;
+        } else
                 exclude_other = 0;
 
         /*
@@ -1952,11 +2055,17 @@ int cmd_report(int argc, const char **argv, const char *prefix __used)
         if (argc)
                 usage_with_options(report_usage, options);
 
-        setup_list(&dso_list, dso_list_str, "dso");
-        setup_list(&comm_list, comm_list_str, "comm");
-        setup_list(&sym_list, sym_list_str, "symbol");
-
         setup_pager();
 
+        setup_list(&dso_list, dso_list_str, &sort_dso, "dso", stdout);
+        setup_list(&comm_list, comm_list_str, &sort_comm, "comm", stdout);
+        setup_list(&sym_list, sym_list_str, &sort_sym, "symbol", stdout);
+
+        if (field_sep && *field_sep == '.') {
+                fputs("'.' is the only non valid --field-separator argument\n",
+                      stderr);
+                exit(129);
+        }
+
         return __cmd_report();
 }
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 27921a8ce1a9..f9510eeeb6c7 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -511,7 +511,8 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 {
         int status;
 
-        argc = parse_options(argc, argv, options, stat_usage, 0);
+        argc = parse_options(argc, argv, options, stat_usage,
+                PARSE_OPT_STOP_AT_NON_OPTION);
         if (!argc)
                 usage_with_options(stat_usage, options);
         if (run_count <= 0 || run_count > MAX_RUN)
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 95d5c0ae375a..c0a423004e15 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -58,6 +58,7 @@ static u64			count_filter			=  5;
 static int                      print_entries                   = 15;
 
 static int                      target_pid                      = -1;
+static int                      inherit                         =  0;
 static int                      profile_cpu                     = -1;
 static int                      nr_cpus                         =  0;
 static unsigned int             realtime_prio                   =  0;
@@ -549,7 +550,7 @@ int group_fd;
 static void start_counter(int i, int counter)
 {
         struct perf_counter_attr *attr;
-        unsigned int cpu;
+        int cpu;
 
         cpu = profile_cpu;
         if (target_pid == -1 && profile_cpu == -1)
@@ -559,6 +560,7 @@ static void start_counter(int i, int counter)
 
         attr->sample_type       = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
         attr->freq              = freq;
+        attr->inherit           = (cpu < 0) && inherit;
 
 try_again:
         fd[i][counter] = sys_perf_counter_open(attr, target_pid, cpu, group_fd, 0);
@@ -685,6 +687,8 @@ static const struct option options[] = {
                     "only display functions with more events than this"),
         OPT_BOOLEAN('g', "group", &group,
                             "put the counters into a counter group"),
+        OPT_BOOLEAN('i', "inherit", &inherit,
+                    "child tasks inherit counters"),
         OPT_STRING('s', "sym-filter", &sym_filter, "pattern",
                     "only display symbols matchig this pattern"),
         OPT_BOOLEAN('z', "zero", &zero,
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index c5656784c61d..31982ad064b4 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -12,6 +12,8 @@
 #include "util/cache.h"
 #include "util/quote.h"
 #include "util/run-command.h"
+#include "util/parse-events.h"
+#include "util/string.h"
 
 const char perf_usage_string[] =
         "perf [--version] [--help] COMMAND [ARGS]";
@@ -25,6 +27,8 @@ struct pager_config {
         int val;
 };
 
+static char debugfs_mntpt[MAXPATHLEN];
+
 static int pager_command_config(const char *var, const char *value, void *data)
 {
         struct pager_config *c = data;
@@ -56,6 +60,15 @@ static void commit_pager_choice(void) {
         }
 }
 
+static void set_debugfs_path(void)
+{
+        char *path;
+
+        path = getenv(PERF_DEBUGFS_ENVIRONMENT);
+        snprintf(debugfs_path, MAXPATHLEN, "%s/%s", path ?: debugfs_mntpt,
+                 "tracing/events");
+}
+
 static int handle_options(const char*** argv, int* argc, int* envchanged)
 {
         int handled = 0;
@@ -122,6 +135,22 @@ static int handle_options(const char*** argv, int* argc, int* envchanged)
                         setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
                         if (envchanged)
                                 *envchanged = 1;
+                } else if (!strcmp(cmd, "--debugfs-dir")) {
+                        if (*argc < 2) {
+                                fprintf(stderr, "No directory given for --debugfs-dir.\n");
+                                usage(perf_usage_string);
+                        }
+                        strncpy(debugfs_mntpt, (*argv)[1], MAXPATHLEN);
+                        debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+                        if (envchanged)
+                                *envchanged = 1;
+                        (*argv)++;
+                        (*argc)--;
+                } else if (!prefixcmp(cmd, "--debugfs-dir=")) {
+                        strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN);
+                        debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+                        if (envchanged)
+                                *envchanged = 1;
                 } else {
                         fprintf(stderr, "Unknown option: %s\n", cmd);
                         usage(perf_usage_string);
@@ -228,6 +257,7 @@ static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
         if (use_pager == -1 && p->option & USE_PAGER)
                 use_pager = 1;
         commit_pager_choice();
+        set_debugfs_path();
 
         status = p->fn(argc, argv, prefix);
         if (status)
@@ -346,6 +376,49 @@ static int run_argv(int *argcp, const char ***argv)
         return done_alias;
 }
 
+/* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */
+static void get_debugfs_mntpt(void)
+{
+        FILE *file;
+        char fs_type[100];
+        char debugfs[MAXPATHLEN];
+
+        /*
+         * try the standard location
+         */
+        if (valid_debugfs_mount("/sys/kernel/debug/") == 0) {
+                strcpy(debugfs_mntpt, "/sys/kernel/debug/");
+                return;
+        }
+
+        /*
+         * try the sane location
+         */
+        if (valid_debugfs_mount("/debug/") == 0) {
+                strcpy(debugfs_mntpt, "/debug/");
+                return;
+        }
+
+        /*
+         * give up and parse /proc/mounts
+         */
+        file = fopen("/proc/mounts", "r");
+        if (file == NULL)
+                return;
+
+        while (fscanf(file, "%*s %"
+                      STR(MAXPATHLEN)
+                      "s %99s %*s %*d %*d\n",
+                      debugfs, fs_type) == 2) {
+                if (strcmp(fs_type, "debugfs") == 0)
+                        break;
+        }
+        fclose(file);
+        if (strcmp(fs_type, "debugfs") == 0) {
+                strncpy(debugfs_mntpt, debugfs, MAXPATHLEN);
+                debugfs_mntpt[MAXPATHLEN - 1] = '\0';
+        }
+}
 
 int main(int argc, const char **argv)
 {
@@ -354,7 +427,8 @@ int main(int argc, const char **argv)
         cmd = perf_extract_argv0_path(argv[0]);
         if (!cmd)
                 cmd = "perf-help";
-
+        /* get debugfs mount point from /proc/mounts */
+        get_debugfs_mntpt();
         /*
          * "perf-xxxx" is the same as "perf xxxx", but we obviously:
          *
@@ -377,6 +451,7 @@ int main(int argc, const char **argv)
         argc--;
         handle_options(&argv, &argc, NULL);
         commit_pager_choice();
+        set_debugfs_path();
         if (argc > 0) {
                 if (!prefixcmp(argv[0], "--"))
                         argv[0] += 2;
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 63e67cc5487b..e5148e2b6134 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -1,7 +1,13 @@
 #ifndef _PERF_PERF_H
 #define _PERF_PERF_H
 
-#if defined(__x86_64__) || defined(__i386__)
+#if defined(__i386__)
+#include "../../arch/x86/include/asm/unistd.h"
+#define rmb()           asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
+#define cpu_relax()     asm volatile("rep; nop" ::: "memory");
+#endif
+
+#if defined(__x86_64__)
 #include "../../arch/x86/include/asm/unistd.h"
 #define rmb()           asm volatile("lfence" ::: "memory")
 #define cpu_relax()     asm volatile("rep; nop" ::: "memory");
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 161d5f413e28..4b50c412b9c5 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -18,6 +18,7 @@
 #define PERFATTRIBUTES_FILE ".perfattributes"
 #define INFOATTRIBUTES_FILE "info/attributes"
 #define ATTRIBUTE_MACRO_PREFIX "[attr]"
+#define PERF_DEBUGFS_ENVIRONMENT "PERF_DEBUGFS_DIR"
 
 typedef int (*config_fn_t)(const char *, const char *, void *);
 extern int perf_default_config(const char *, const char *, void *);
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index b5ef53ad4c7a..bf280449fcfd 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -16,7 +16,7 @@ struct perf_header {
         int frozen;
         int attrs, size;
         struct perf_header_attr **attr;
-        off_t attr_offset;
+        s64 attr_offset;
         u64 data_offset;
         u64 data_size;
 };
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
index 99c1b3d1edd9..a6b87390cb52 100644
--- a/tools/perf/util/include/linux/kernel.h
+++ b/tools/perf/util/include/linux/kernel.h
@@ -18,4 +18,12 @@
         (type *)((char *)__mptr - offsetof(type, member)); })
 #endif
 
+#ifndef max
+#define max(x, y) ({                            \
+        typeof(x) _max1 = (x);                  \
+        typeof(y) _max2 = (y);                  \
+        (void) (&_max1 == &_max2);              \
+        _max1 > _max2 ? _max1 : _max2; })
+#endif
+
 #endif
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 5184959e0615..7bdad8df22a6 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -5,6 +5,7 @@
 #include "parse-events.h"
 #include "exec_cmd.h"
 #include "string.h"
+#include "cache.h"
 
 extern char *strcasestr(const char *haystack, const char *needle);
 
@@ -19,6 +20,8 @@ struct event_symbol {
         char    *alias;
 };
 
+char debugfs_path[MAXPATHLEN];
+
 #define CHW(x) .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_##x
 #define CSW(x) .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_##x
 
@@ -71,8 +74,8 @@ static char *sw_event_names[] = {
 #define MAX_ALIASES 8
 
 static char *hw_cache[][MAX_ALIASES] = {
- { "L1-d$",     "l1-d",         "l1d",          "L1-data",              },
- { "L1-i$",     "l1-i",         "l1i",          "L1-instruction",       },
+ { "L1-dcache", "l1-d",         "l1d",          "L1-data",              },
+ { "L1-icache", "l1-i",         "l1i",          "L1-instruction",       },
  { "LLC",       "L2"                                                    },
  { "dTLB",      "d-tlb",        "Data-TLB",                             },
  { "iTLB",      "i-tlb",        "Instruction-TLB",                      },
@@ -110,6 +113,88 @@ static unsigned long hw_cache_stat[C(MAX)] = {
  [C(BPU)]       = (CACHE_READ),
 };
 
+#define for_each_subsystem(sys_dir, sys_dirent, sys_next, file, st)            \
+        while (!readdir_r(sys_dir, &sys_dirent, &sys_next) && sys_next)        \
+        if (snprintf(file, MAXPATHLEN, "%s/%s", debugfs_path,                  \
+                        sys_dirent.d_name) &&                                  \
+           (!stat(file, &st)) && (S_ISDIR(st.st_mode)) &&                      \
+           (strcmp(sys_dirent.d_name, ".")) &&                                 \
+           (strcmp(sys_dirent.d_name, "..")))
+
+#define for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next, file, st)    \
+        while (!readdir_r(evt_dir, &evt_dirent, &evt_next) && evt_next)        \
+        if (snprintf(file, MAXPATHLEN, "%s/%s/%s", debugfs_path,               \
+                     sys_dirent.d_name, evt_dirent.d_name) &&                  \
+           (!stat(file, &st)) && (S_ISDIR(st.st_mode)) &&                      \
+           (strcmp(evt_dirent.d_name, ".")) &&                                 \
+           (strcmp(evt_dirent.d_name, "..")))
+
+#define MAX_EVENT_LENGTH 30
+
+int valid_debugfs_mount(const char *debugfs)
+{
+        struct statfs st_fs;
+
+        if (statfs(debugfs, &st_fs) < 0)
+                return -ENOENT;
+        else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+                return -ENOENT;
+        return 0;
+}
+
+static char *tracepoint_id_to_name(u64 config)
+{
+        static char tracepoint_name[2 * MAX_EVENT_LENGTH];
+        DIR *sys_dir, *evt_dir;
+        struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+        struct stat st;
+        char id_buf[4];
+        int fd;
+        u64 id;
+        char evt_path[MAXPATHLEN];
+
+        if (valid_debugfs_mount(debugfs_path))
+                return "unkown";
+
+        sys_dir = opendir(debugfs_path);
+        if (!sys_dir)
+                goto cleanup;
+
+        for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+                evt_dir = opendir(evt_path);
+                if (!evt_dir)
+                        goto cleanup;
+                for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+                                                                evt_path, st) {
+                        snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id",
+                                 debugfs_path, sys_dirent.d_name,
+                                 evt_dirent.d_name);
+                        fd = open(evt_path, O_RDONLY);
+                        if (fd < 0)
+                                continue;
+                        if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+                                close(fd);
+                                continue;
+                        }
+                        close(fd);
+                        id = atoll(id_buf);
+                        if (id == config) {
+                                closedir(evt_dir);
+                                closedir(sys_dir);
+                                snprintf(tracepoint_name, 2 * MAX_EVENT_LENGTH,
+                                        "%s:%s", sys_dirent.d_name,
+                                        evt_dirent.d_name);
+                                return tracepoint_name;
+                        }
+                }
+                closedir(evt_dir);
+        }
+
+cleanup:
+        closedir(sys_dir);
+        return "unkown";
+}
+
 static int is_cache_op_valid(u8 cache_type, u8 cache_op)
 {
         if (hw_cache_stat[cache_type] & COP(cache_op))
@@ -177,6 +262,9 @@ char *event_name(int counter)
                         return sw_event_names[config];
                 return "unknown-software";
 
+        case PERF_TYPE_TRACEPOINT:
+                return tracepoint_id_to_name(config);
+
         default:
                 break;
         }
@@ -265,6 +353,53 @@ parse_generic_hw_event(const char **str, struct perf_counter_attr *attr)
         return 1;
 }
 
+static int parse_tracepoint_event(const char **strp,
+                                    struct perf_counter_attr *attr)
+{
+        const char *evt_name;
+        char sys_name[MAX_EVENT_LENGTH];
+        char id_buf[4];
+        int fd;
+        unsigned int sys_length, evt_length;
+        u64 id;
+        char evt_path[MAXPATHLEN];
+
+        if (valid_debugfs_mount(debugfs_path))
+                return 0;
+
+        evt_name = strchr(*strp, ':');
+        if (!evt_name)
+                return 0;
+
+        sys_length = evt_name - *strp;
+        if (sys_length >= MAX_EVENT_LENGTH)
+                return 0;
+
+        strncpy(sys_name, *strp, sys_length);
+        sys_name[sys_length] = '\0';
+        evt_name = evt_name + 1;
+        evt_length = strlen(evt_name);
+        if (evt_length >= MAX_EVENT_LENGTH)
+                return 0;
+
+        snprintf(evt_path, MAXPATHLEN, "%s/%s/%s/id", debugfs_path,
+                 sys_name, evt_name);
+        fd = open(evt_path, O_RDONLY);
+        if (fd < 0)
+                return 0;
+
+        if (read(fd, id_buf, sizeof(id_buf)) < 0) {
+                close(fd);
+                return 0;
+        }
+        close(fd);
+        id = atoll(id_buf);
+        attr->config = id;
+        attr->type = PERF_TYPE_TRACEPOINT;
+        *strp = evt_name + evt_length;
+        return 1;
+}
+
 static int check_events(const char *str, unsigned int i)
 {
         int n;
@@ -374,7 +509,8 @@ parse_event_modifier(const char **strp, struct perf_counter_attr *attr)
  */
 static int parse_event_symbols(const char **str, struct perf_counter_attr *attr)
 {
-        if (!(parse_raw_event(str, attr) ||
+        if (!(parse_tracepoint_event(str, attr) ||
+              parse_raw_event(str, attr) ||
               parse_numeric_event(str, attr) ||
               parse_symbolic_event(str, attr) ||
               parse_generic_hw_event(str, attr)))
@@ -423,6 +559,42 @@ static const char * const event_type_descriptors[] = {
 };
 
 /*
+ * Print the events from <debugfs_mount_point>/tracing/events
+ */
+
+static void print_tracepoint_events(void)
+{
+        DIR *sys_dir, *evt_dir;
+        struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+        struct stat st;
+        char evt_path[MAXPATHLEN];
+
+        if (valid_debugfs_mount(debugfs_path))
+                return;
+
+        sys_dir = opendir(debugfs_path);
+        if (!sys_dir)
+                goto cleanup;
+
+        for_each_subsystem(sys_dir, sys_dirent, sys_next, evt_path, st) {
+                evt_dir = opendir(evt_path);
+                if (!evt_dir)
+                        goto cleanup;
+                for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next,
+                                                                evt_path, st) {
+                        snprintf(evt_path, MAXPATHLEN, "%s:%s",
+                                 sys_dirent.d_name, evt_dirent.d_name);
+                        fprintf(stderr, "  %-40s [%s]\n", evt_path,
+                                event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
+                }
+                closedir(evt_dir);
+        }
+
+cleanup:
+        closedir(sys_dir);
+}
+
+/*
  * Print the help text for the event symbols:
  */
 void print_events(void)
@@ -436,7 +608,7 @@ void print_events(void)
 
         for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
                 type = syms->type + 1;
-                if (type > ARRAY_SIZE(event_type_descriptors))
+                if (type >= ARRAY_SIZE(event_type_descriptors))
                         type = 0;
 
                 if (type != prev_type)
@@ -472,5 +644,7 @@ void print_events(void)
                 "rNNN");
         fprintf(stderr, "\n");
 
+        print_tracepoint_events();
+
         exit(129);
 }
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index e3d552908e60..1ea5d09b6eb1 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -3,6 +3,8 @@
  * Parse symbolic events/counts passed in as options:
  */
 
+struct option;
+
 extern int                      nr_counters;
 
 extern struct perf_counter_attr attrs[MAX_COUNTERS];
@@ -15,3 +17,6 @@ extern int parse_events(const struct option *opt, const char *str, int unset);
 
 extern void print_events(void);
 
+extern char debugfs_path[];
+extern int valid_debugfs_mount(const char *debugfs);
+
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index 3dca2f654cd0..bf39dfadfd24 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -5,4 +5,7 @@
 
 int hex2u64(const char *ptr, u64 *val);
 
+#define _STR(x) #x
+#define STR(x) _STR(x)
+
 #endif
diff --git a/tools/perf/util/strlist.c b/tools/perf/util/strlist.c
index 025a78edfffe..7ad38171dc2b 100644
--- a/tools/perf/util/strlist.c
+++ b/tools/perf/util/strlist.c
@@ -64,6 +64,7 @@ int strlist__add(struct strlist *self, const char *new_entry)
 
         rb_link_node(&sn->rb_node, parent, p);
         rb_insert_color(&sn->rb_node, &self->entries);
+        ++self->nr_entries;
 
         return 0;
 }
@@ -155,8 +156,9 @@ struct strlist *strlist__new(bool dupstr, const char *slist)
         struct strlist *self = malloc(sizeof(*self));
 
         if (self != NULL) {
-                self->entries = RB_ROOT;
-                self->dupstr = dupstr;
+                self->entries    = RB_ROOT;
+                self->dupstr     = dupstr;
+                self->nr_entries = 0;
                 if (slist && strlist__parse_list(self, slist) != 0)
                         goto out_error;
         }
@@ -182,3 +184,17 @@ void strlist__delete(struct strlist *self)
                 free(self);
         }
 }
+
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx)
+{
+        struct rb_node *nd;
+
+        for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
+                struct str_node *pos = rb_entry(nd, struct str_node, rb_node);
+
+                if (!idx--)
+                        return pos;
+        }
+
+        return NULL;
+}
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
index 2fdcfee87586..921818e44a54 100644
--- a/tools/perf/util/strlist.h
+++ b/tools/perf/util/strlist.h
@@ -11,7 +11,8 @@ struct str_node {
 
 struct strlist {
         struct rb_root entries;
-        bool dupstr;
+        unsigned int   nr_entries;
+        bool           dupstr;
 };
 
 struct strlist *strlist__new(bool dupstr, const char *slist);
@@ -21,11 +22,17 @@ void strlist__remove(struct strlist *self, struct str_node *sn);
 int strlist__load(struct strlist *self, const char *filename);
 int strlist__add(struct strlist *self, const char *str);
 
+struct str_node *strlist__entry(const struct strlist *self, unsigned int idx);
 bool strlist__has_entry(struct strlist *self, const char *entry);
 
 static inline bool strlist__empty(const struct strlist *self)
 {
-        return rb_first(&self->entries) == NULL;
+        return self->nr_entries == 0;
+}
+
+static inline unsigned int strlist__nr_entries(const struct strlist *self)
+{
+        return self->nr_entries;
 }
 
 int strlist__parse_list(struct strlist *self, const char *s);
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 4683b67b5ee4..28106059bf12 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -6,9 +6,15 @@
 #include <libelf.h>
 #include <gelf.h>
 #include <elf.h>
+#include <bfd.h>
 
 const char *sym_hist_filter;
 
+#ifndef DMGL_PARAMS
+#define DMGL_PARAMS      (1 << 0)       /* Include function args */
+#define DMGL_ANSI        (1 << 1)       /* Include const, volatile, etc */
+#endif
+
 static struct symbol *symbol__new(u64 start, u64 len,
                                   const char *name, unsigned int priv_size,
                                   u64 obj_start, int verbose)
@@ -65,6 +71,7 @@ struct dso *dso__new(const char *name, unsigned int sym_priv_size)
                 self->syms = RB_ROOT;
                 self->sym_priv_size = sym_priv_size;
                 self->find_symbol = dso__find_symbol;
+                self->slen_calculated = 0;
         }
 
         return self;
@@ -373,36 +380,61 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
              idx < nr_entries; \
              ++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
 
-static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
-                                       GElf_Ehdr *ehdr, Elf_Scn *scn_dynsym,
-                                       GElf_Shdr *shdr_dynsym,
-                                       size_t dynsym_idx, int verbose)
+/*
+ * We need to check if we have a .dynsym, so that we can handle the
+ * .plt, synthesizing its symbols, that aren't on the symtabs (be it
+ * .dynsym or .symtab).
+ * And always look at the original dso, not at debuginfo packages, that
+ * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
+ */
+static int dso__synthesize_plt_symbols(struct  dso *self, int verbose)
 {
         uint32_t nr_rel_entries, idx;
         GElf_Sym sym;
         u64 plt_offset;
         GElf_Shdr shdr_plt;
         struct symbol *f;
-        GElf_Shdr shdr_rel_plt;
+        GElf_Shdr shdr_rel_plt, shdr_dynsym;
         Elf_Data *reldata, *syms, *symstrs;
-        Elf_Scn *scn_plt_rel, *scn_symstrs;
+        Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym;
+        size_t dynsym_idx;
+        GElf_Ehdr ehdr;
         char sympltname[1024];
-        int nr = 0, symidx;
+        Elf *elf;
+        int nr = 0, symidx, fd, err = 0;
+
+        fd = open(self->name, O_RDONLY);
+        if (fd < 0)
+                goto out;
+
+        elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+        if (elf == NULL)
+                goto out_close;
+
+        if (gelf_getehdr(elf, &ehdr) == NULL)
+                goto out_elf_end;
+
+        scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym,
+                                         ".dynsym", &dynsym_idx);
+        if (scn_dynsym == NULL)
+                goto out_elf_end;
 
-        scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+        scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
                                           ".rela.plt", NULL);
         if (scn_plt_rel == NULL) {
-                scn_plt_rel = elf_section_by_name(elf, ehdr, &shdr_rel_plt,
+                scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
                                                   ".rel.plt", NULL);
                 if (scn_plt_rel == NULL)
-                        return 0;
+                        goto out_elf_end;
         }
 
+        err = -1;
+
         if (shdr_rel_plt.sh_link != dynsym_idx)
-                return 0;
+                goto out_elf_end;
 
-        if (elf_section_by_name(elf, ehdr, &shdr_plt, ".plt", NULL) == NULL)
-                return 0;
+        if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL)
+                goto out_elf_end;
 
         /*
          * Fetch the relocation section to find the indexes to the GOT
@@ -410,19 +442,19 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
          */
         reldata = elf_getdata(scn_plt_rel, NULL);
         if (reldata == NULL)
-                return -1;
+                goto out_elf_end;
 
         syms = elf_getdata(scn_dynsym, NULL);
         if (syms == NULL)
-                return -1;
+                goto out_elf_end;
 
-        scn_symstrs = elf_getscn(elf, shdr_dynsym->sh_link);
+        scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link);
         if (scn_symstrs == NULL)
-                return -1;
+                goto out_elf_end;
 
         symstrs = elf_getdata(scn_symstrs, NULL);
         if (symstrs == NULL)
-                return -1;
+                goto out_elf_end;
 
         nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
         plt_offset = shdr_plt.sh_offset;
@@ -441,7 +473,7 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
                         f = symbol__new(plt_offset, shdr_plt.sh_entsize,
                                         sympltname, self->sym_priv_size, 0, verbose);
                         if (!f)
-                                return -1;
+                                goto out_elf_end;
 
                         dso__insert_symbol(self, f);
                         ++nr;
@@ -459,19 +491,25 @@ static int dso__synthesize_plt_symbols(struct  dso *self, Elf *elf,
                         f = symbol__new(plt_offset, shdr_plt.sh_entsize,
                                         sympltname, self->sym_priv_size, 0, verbose);
                         if (!f)
-                                return -1;
+                                goto out_elf_end;
 
                         dso__insert_symbol(self, f);
                         ++nr;
                 }
-        } else {
-                /*
-                 * TODO: There are still one more shdr_rel_plt.sh_type
-                 * I have to investigate, but probably should be ignored.
-                 */
         }
 
-        return nr;
+        err = 0;
+out_elf_end:
+        elf_end(elf);
+out_close:
+        close(fd);
+
+        if (err == 0)
+                return nr;
+out:
+        fprintf(stderr, "%s: problems reading %s PLT info.\n",
+                __func__, self->name);
+        return 0;
 }
 
 static int dso__load_sym(struct dso *self, int fd, const char *name,
@@ -485,10 +523,9 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
         GElf_Shdr shdr;
         Elf_Data *syms;
         GElf_Sym sym;
-        Elf_Scn *sec, *sec_dynsym, *sec_strndx;
+        Elf_Scn *sec, *sec_strndx;
         Elf *elf;
-        size_t dynsym_idx;
-        int nr = 0;
+        int nr = 0, kernel = !strcmp("[kernel]", self->name);
 
         elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
         if (elf == NULL) {
@@ -504,32 +541,11 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
                 goto out_elf_end;
         }
 
-        /*
-         * We need to check if we have a .dynsym, so that we can handle the
-         * .plt, synthesizing its symbols, that aren't on the symtabs (be it
-         * .dynsym or .symtab)
-         */
-        sec_dynsym = elf_section_by_name(elf, &ehdr, &shdr,
-                                         ".dynsym", &dynsym_idx);
-        if (sec_dynsym != NULL) {
-                nr = dso__synthesize_plt_symbols(self, elf, &ehdr,
-                                                 sec_dynsym, &shdr,
-                                                 dynsym_idx, verbose);
-                if (nr < 0)
-                        goto out_elf_end;
-        }
-
-        /*
-         * But if we have a full .symtab (that is a superset of .dynsym) we
-         * should add the symbols not in the .dynsyn
-         */
         sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
         if (sec == NULL) {
-                if (sec_dynsym == NULL)
+                sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
+                if (sec == NULL)
                         goto out_elf_end;
-
-                sec = sec_dynsym;
-                gelf_getshdr(sec, &shdr);
         }
 
         syms = elf_getdata(sec, NULL);
@@ -555,12 +571,17 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
         nr_syms = shdr.sh_size / shdr.sh_entsize;
 
         memset(&sym, 0, sizeof(sym));
-        self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
+        if (!kernel) {
+                self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
                                 elf_section_by_name(elf, &ehdr, &shdr,
                                                      ".gnu.prelink_undo",
                                                      NULL) != NULL);
+        } else self->adjust_symbols = 0;
+
         elf_symtab__for_each_symbol(syms, nr_syms, index, sym) {
                 struct symbol *f;
+                const char *name;
+                char *demangled;
                 u64 obj_start;
                 struct section *section = NULL;
                 int is_label = elf_sym__is_label(&sym);
@@ -599,10 +620,19 @@ static int dso__load_sym(struct dso *self, int fd, const char *name,
                                 goto out_elf_end;
                         }
                 }
+                /*
+                 * We need to figure out if the object was created from C++ sources
+                 * DWARF DW_compile_unit has this, but we don't always have access
+                 * to it...
+                 */
+                name = elf_sym__name(&sym, symstrs);
+                demangled = bfd_demangle(NULL, name, DMGL_PARAMS | DMGL_ANSI);
+                if (demangled != NULL)
+                        name = demangled;
 
-                f = symbol__new(sym.st_value, sym.st_size,
-                                elf_sym__name(&sym, symstrs),
+                f = symbol__new(sym.st_value, sym.st_size, name,
                                 self->sym_priv_size, obj_start, verbose);
+                free(demangled);
                 if (!f)
                         goto out_elf_end;
 
@@ -668,6 +698,11 @@ more:
         if (!ret)
                 goto more;
 
+        if (ret > 0) {
+                int nr_plt = dso__synthesize_plt_symbols(self, verbose);
+                if (nr_plt > 0)
+                        ret += nr_plt;
+        }
 out:
         free(name);
         return ret;
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 7918cffb23cd..2f92b21c712d 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -25,6 +25,7 @@ struct dso {
         struct symbol    *(*find_symbol)(struct dso *, u64 ip);
         unsigned int     sym_priv_size;
         unsigned char    adjust_symbols;
+        unsigned char    slen_calculated;
         char             name[0];
 };
 
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index b4be6071c105..68fe157d72fb 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -50,6 +50,7 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <sys/stat.h>
+#include <sys/statfs.h>
 #include <fcntl.h>
 #include <stddef.h>
 #include <stdlib.h>
@@ -80,6 +81,7 @@
 #include <netdb.h>
 #include <pwd.h>
 #include <inttypes.h>
+#include "../../../include/linux/magic.h"
 
 #ifndef NO_ICONV
 #include <iconv.h>