Subject: [PATCH 1/2] serial: Add flush_buffer() operation to uart_ops

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 14 insertions, 0 deletions

diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 88ad615dd338..77ba0afbe4db 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -186,6 +186,17 @@ hardware.
         Locking: port_sem taken.
         Interrupts: caller dependent.
 
+  flush_buffer(port)
+        Flush any write buffers, reset any DMA state and stop any
+        ongoing DMA transfers.
+
+        This will be called whenever the port->info->xmit circular
+        buffer is cleared.
+
+        Locking: port->lock taken.
+        Interrupts: locally disabled.
+        This call must not sleep
+
   set_termios(port,termios,oldtermios)
         Change the port parameters, including word length, parity, stop
         bits.  Update read_status_mask and ignore_status_mask to indicate
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 42d2e108b679..9884bc9eecb1 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -573,6 +573,8 @@ static void uart_flush_buffer(struct tty_struct *tty)
 
         spin_lock_irqsave(&port->lock, flags);
         uart_circ_clear(&state->info->xmit);
+        if (port->ops->flush_buffer)
+                port->ops->flush_buffer(port);
         spin_unlock_irqrestore(&port->lock, flags);
         tty_wakeup(tty);
 }
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d8f31de632c5..1d2faa6592ae 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -190,6 +190,7 @@ struct uart_ops {
         void            (*break_ctl)(struct uart_port *, int ctl);
         int             (*startup)(struct uart_port *);
         void            (*shutdown)(struct uart_port *);
+        void            (*flush_buffer)(struct uart_port *);
         void            (*set_termios)(struct uart_port *, struct ktermios *new,
                                        struct ktermios *old);
         void            (*set_ldisc)(struct uart_port *);