aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPeer Chen <Peer.Chen@uli.com.tw>2005-07-29 15:33:58 -0400
committerJeff Garzik <jgarzik@pobox.com>2005-07-29 15:33:58 -0400
commit4689ced99b18937e28c0f6c190394ccc3c61d651 (patch)
treeaaec0912f3802359f1fd2023e078cf3d31c57286
parentc32511e2718618f0b53479eb36e07439aa363a74 (diff)
[netdrvr] add 'uli526x' driver (a tulip clone)
We want to extract our LAN card driver from tulip core driver and make a new file uli526x.c at tulip folder, because we have added some ethtool interface support and non-eprom support in our driver and may be other change in the futher. If our controllers support are still contained in the tulip core driver, I think it'll increase the complexity of maintenance, you know, tulip core driver include several files and support so many other controllers. Furthermore, I tested the newest kernel 2.6.12 and I found the tulip driver can not work on our lan controller, and I no time to debug it, so I aspired want to make a single uli526x.c file just for our controllers. Could you help us remove the ULi m5261/m5263 lan controller support from tulip core driver and add the new single uli526x.c file for us? Signed-off-by: Peer Chen <Peer.Chen@uli.com.tw> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat
-rw-r--r--drivers/net/tulip/Kconfig12
-rw-r--r--drivers/net/tulip/Makefile1
-rw-r--r--drivers/net/tulip/uli526x.c1770
3 files changed, 1783 insertions, 0 deletions
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index e2cdaf876201..8c9634a98c11 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -135,6 +135,18 @@ config DM9102
135 <file:Documentation/networking/net-modules.txt>. The module will 135 <file:Documentation/networking/net-modules.txt>. The module will
136 be called dmfe. 136 be called dmfe.
137 137
138config ULI526X
139 tristate "ULi M526x controller support"
140 depends on NET_TULIP && PCI
141 select CRC32
142 ---help---
143 This driver is for ULi M5261/M5263 10/100M Ethernet Controller
144 (<http://www.uli.com.tw/>).
145
146 To compile this driver as a module, choose M here and read
147 <file:Documentation/networking/net-modules.txt>. The module will
148 be called uli526x.
149
138config PCMCIA_XIRCOM 150config PCMCIA_XIRCOM
139 tristate "Xircom CardBus support (new driver)" 151 tristate "Xircom CardBus support (new driver)"
140 depends on NET_TULIP && CARDBUS 152 depends on NET_TULIP && CARDBUS
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 8bb9b4683979..451090d6fcca 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840) += winbond-840.o
9obj-$(CONFIG_DE2104X) += de2104x.o 9obj-$(CONFIG_DE2104X) += de2104x.o
10obj-$(CONFIG_TULIP) += tulip.o 10obj-$(CONFIG_TULIP) += tulip.o
11obj-$(CONFIG_DE4X5) += de4x5.o 11obj-$(CONFIG_DE4X5) += de4x5.o
12obj-$(CONFIG_ULI526X) += uli526x.o
12 13
13# Declare multi-part drivers. 14# Declare multi-part drivers.
14 15
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
new file mode 100644
index 000000000000..27f99e087f79
--- /dev/null
+++ b/drivers/net/tulip/uli526x.c
@@ -0,0 +1,1770 @@
1/*
2 This program is free software; you can redistribute it and/or
3 modify it under the terms of the GNU General Public License
4 as published by the Free Software Foundation; either version 2
5 of the License, or (at your option) any later version.
6
7 This program is distributed in the hope that it will be useful,
8 but WITHOUT ANY WARRANTY; without even the implied warranty of
9 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 GNU General Public License for more details.
11
12
13*/
14
15#define DRV_NAME "uli526x"
16#define DRV_VERSION "0.9.3"
17#define DRV_RELDATE "2005-7-29"
18
19#include <linux/module.h>
20
21#include <linux/kernel.h>
22#include <linux/string.h>
23#include <linux/timer.h>
24#include <linux/ptrace.h>
25#include <linux/errno.h>
26#include <linux/ioport.h>
27#include <linux/slab.h>
28#include <linux/interrupt.h>
29#include <linux/pci.h>
30#include <linux/init.h>
31#include <linux/netdevice.h>
32#include <linux/etherdevice.h>
33#include <linux/ethtool.h>
34#include <linux/skbuff.h>
35#include <linux/delay.h>
36#include <linux/spinlock.h>
37
38#include <asm/processor.h>
39#include <asm/bitops.h>
40#include <asm/io.h>
41#include <asm/dma.h>
42#include <asm/uaccess.h>
43
44
45/* Board/System/Debug information/definition ---------------- */
46#define PCI_ULI5261_ID 0x526110B9 /* ULi M5261 ID*/
47#define PCI_ULI5263_ID 0x526310B9 /* ULi M5263 ID*/
48
49#define ULI526X_IO_SIZE 0x100
50#define TX_DESC_CNT 0x20 /* Allocated Tx descriptors */
51#define RX_DESC_CNT 0x30 /* Allocated Rx descriptors */
52#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */
53#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */
54#define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT)
55#define TX_BUF_ALLOC 0x600
56#define RX_ALLOC_SIZE 0x620
57#define ULI526X_RESET 1
58#define CR0_DEFAULT 0
59#define CR6_DEFAULT 0x00080000 /* HD */
60#define CR6_DEFAULT_A 0x22240000
61#define CR7_DEFAULT 0x180c1
62#define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */
63#define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */
64#define MAX_PACKET_SIZE 1514
65#define ULI5261_MAX_MULTICAST 14
66#define RX_COPY_SIZE 100
67#define MAX_CHECK_PACKET 0x8000
68
69#define ULI526X_10MHF 0
70#define ULI526X_100MHF 1
71#define ULI526X_10MFD 4
72#define ULI526X_100MFD 5
73#define ULI526X_AUTO 8
74
75#define ULI526X_TXTH_72 0x400000 /* TX TH 72 byte */
76#define ULI526X_TXTH_96 0x404000 /* TX TH 96 byte */
77#define ULI526X_TXTH_128 0x0000 /* TX TH 128 byte */
78#define ULI526X_TXTH_256 0x4000 /* TX TH 256 byte */
79#define ULI526X_TXTH_512 0x8000 /* TX TH 512 byte */
80#define ULI526X_TXTH_1K 0xC000 /* TX TH 1K byte */
81
82#define ULI526X_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */
83#define ULI526X_TX_TIMEOUT ((16*HZ)/2) /* tx packet time-out time 8 s" */
84#define ULI526X_TX_KICK (4*HZ/2) /* tx packet Kick-out time 2 s" */
85
86#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
87
88#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
89
90
91/* CR9 definition: SROM/MII */
92#define CR9_SROM_READ 0x4800
93#define CR9_SRCS 0x1
94#define CR9_SRCLK 0x2
95#define CR9_CRDOUT 0x8
96#define SROM_DATA_0 0x0
97#define SROM_DATA_1 0x4
98#define PHY_DATA_1 0x20000
99#define PHY_DATA_0 0x00000
100#define MDCLKH 0x10000
101
102#define PHY_POWER_DOWN 0x800
103
104#define SROM_V41_CODE 0x14
105
106#define SROM_CLK_WRITE(data, ioaddr) outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);udelay(5);outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);udelay(5);
107
108/* Sten Check */
109#define DEVICE net_device
110
111/* Structure/enum declaration ------------------------------- */
112struct tx_desc {
113 u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
114 char *tx_buf_ptr; /* Data for us */
115 struct tx_desc *next_tx_desc;
116} __attribute__(( aligned(32) ));
117
118struct rx_desc {
119 u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
120 struct sk_buff *rx_skb_ptr; /* Data for us */
121 struct rx_desc *next_rx_desc;
122} __attribute__(( aligned(32) ));
123
124struct uli526x_board_info {
125 u32 chip_id; /* Chip vendor/Device ID */
126 struct DEVICE *next_dev; /* next device */
127 struct pci_dev *pdev; /* PCI device */
128 spinlock_t lock;
129
130 long ioaddr; /* I/O base address */
131 u32 cr0_data;
132 u32 cr5_data;
133 u32 cr6_data;
134 u32 cr7_data;
135 u32 cr15_data;
136
137 /* pointer for memory physical address */
138 dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */
139 dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */
140 dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */
141 dma_addr_t first_tx_desc_dma;
142 dma_addr_t first_rx_desc_dma;
143
144 /* descriptor pointer */
145 unsigned char *buf_pool_ptr; /* Tx buffer pool memory */
146 unsigned char *buf_pool_start; /* Tx buffer pool align dword */
147 unsigned char *desc_pool_ptr; /* descriptor pool memory */
148 struct tx_desc *first_tx_desc;
149 struct tx_desc *tx_insert_ptr;
150 struct tx_desc *tx_remove_ptr;
151 struct rx_desc *first_rx_desc;
152 struct rx_desc *rx_insert_ptr;
153 struct rx_desc *rx_ready_ptr; /* packet come pointer */
154 unsigned long tx_packet_cnt; /* transmitted packet count */
155 unsigned long rx_avail_cnt; /* available rx descriptor count */
156 unsigned long interval_rx_cnt; /* rx packet count a callback time */
157
158 u16 dbug_cnt;
159 u16 NIC_capability; /* NIC media capability */
160 u16 PHY_reg4; /* Saved Phyxcer register 4 value */
161
162 u8 media_mode; /* user specify media mode */
163 u8 op_mode; /* real work media mode */
164 u8 phy_addr;
165 u8 link_failed; /* Ever link failed */
166 u8 wait_reset; /* Hardware failed, need to reset */
167 struct timer_list timer;
168
169 /* System defined statistic counter */
170 struct net_device_stats stats;
171
172 /* Driver defined statistic counter */
173 unsigned long tx_fifo_underrun;
174 unsigned long tx_loss_carrier;
175 unsigned long tx_no_carrier;
176 unsigned long tx_late_collision;
177 unsigned long tx_excessive_collision;
178 unsigned long tx_jabber_timeout;
179 unsigned long reset_count;
180 unsigned long reset_cr8;
181 unsigned long reset_fatal;
182 unsigned long reset_TXtimeout;
183
184 /* NIC SROM data */
185 unsigned char srom[128];
186 u8 init;
187};
188
189enum uli526x_offsets {
190 DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
191 DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
192 DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
193 DCR15 = 0x78
194};
195
196enum uli526x_CR6_bits {
197 CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
198 CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
199 CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
200};
201
202/* Global variable declaration ----------------------------- */
203static int __devinitdata printed_version;
204static char version[] __devinitdata =
205 KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
206 DRV_VERSION " (" DRV_RELDATE ")\n";
207
208static int uli526x_debug;
209static unsigned char uli526x_media_mode = ULI526X_AUTO;
210static u32 uli526x_cr6_user_set;
211
212/* For module input parameter */
213static int debug;
214static u32 cr6set;
215static u32 m526x_id;
216static unsigned char mode = 8;
217
218/* function declaration ------------------------------------- */
219static int uli526x_open(struct DEVICE *);
220static int uli526x_start_xmit(struct sk_buff *, struct DEVICE *);
221static int uli526x_stop(struct DEVICE *);
222static struct net_device_stats * uli526x_get_stats(struct DEVICE *);
223static void uli526x_set_filter_mode(struct DEVICE *);
224static struct ethtool_ops netdev_ethtool_ops;
225static u16 read_srom_word(long ,int);
226static irqreturn_t uli526x_interrupt(int , void *, struct pt_regs *);
227static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
228static void allocate_rx_buffer(struct uli526x_board_info *);
229static void update_cr6(u32, unsigned long);
230static void send_filter_frame(struct DEVICE * ,int);
231static u16 phy_read(unsigned long, u8, u8, u32);
232static u16 phy_readby_cr10(unsigned long, u8, u8);
233static void phy_write(unsigned long, u8, u8, u16, u32);
234static void phy_writeby_cr10(unsigned long, u8, u8, u16);
235static void phy_write_1bit(unsigned long, u32, u32);
236static u16 phy_read_1bit(unsigned long, u32);
237static u8 uli526x_sense_speed(struct uli526x_board_info *);
238static void uli526x_process_mode(struct uli526x_board_info *);
239static void uli526x_timer(unsigned long);
240static void uli526x_rx_packet(struct DEVICE *, struct uli526x_board_info *);
241static void uli526x_free_tx_pkt(struct DEVICE *, struct uli526x_board_info *);
242static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
243static void uli526x_dynamic_reset(struct DEVICE *);
244static void uli526x_free_rxbuffer(struct uli526x_board_info *);
245static void uli526x_init(struct DEVICE *);
246static void uli526x_set_phyxcer(struct uli526x_board_info *);
247
248/* ULI526X network baord routine ---------------------------- */
249
250/*
251 * Search ULI526X board ,allocate space and register it
252 */
253
254static int __devinit uli526x_init_one (struct pci_dev *pdev,
255 const struct pci_device_id *ent)
256{
257 struct uli526x_board_info *db; /* board information structure */
258 struct net_device *dev;
259 int i, err;
260 u32 configval;
261
262 ULI526X_DBUG(0, "uli526x_init_one()", 0);
263
264 if (!printed_version++)
265 printk(version);
266
267 /* Init network device */
268 dev = alloc_etherdev(sizeof(*db));
269 if (dev == NULL)
270 return -ENOMEM;
271 SET_MODULE_OWNER(dev);
272 SET_NETDEV_DEV(dev, &pdev->dev);
273
274 if (pci_set_dma_mask(pdev, 0xffffffff)) {
275 printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
276 err = -ENODEV;
277 goto err_out_free;
278 }
279
280 /* Enable Master/IO access, Disable memory access */
281 err = pci_enable_device(pdev);
282 if (err)
283 goto err_out_free;
284
285 if (!pci_resource_start(pdev, 0)) {
286 printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
287 err = -ENODEV;
288 goto err_out_disable;
289 }
290
291 if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
292 printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
293 err = -ENODEV;
294 goto err_out_disable;
295 }
296
297 if (pci_request_regions(pdev, DRV_NAME)) {
298 printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
299 err = -ENODEV;
300 goto err_out_disable;
301 }
302
303 //add by clearzhang 2004/7/8
304 pci_read_config_dword(pdev,0x0,&configval);
305 m526x_id = configval;
306 if(configval == 0x526310b9)
307 {
308 //printk("is m5263\n");
309 pci_read_config_dword(pdev,0x0c,&configval);
310 configval = ((configval & 0xffff00ff) | 0x8000);
311 pci_write_config_dword(pdev,0x0c,configval);
312 }
313 /* Init system & device */
314 db = netdev_priv(dev);
315
316 /* Allocate Tx/Rx descriptor memory */
317 db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
318 db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
319
320 db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
321 db->first_tx_desc_dma = db->desc_pool_dma_ptr;
322 db->buf_pool_start = db->buf_pool_ptr;
323 db->buf_pool_dma_start = db->buf_pool_dma_ptr;
324
325 db->chip_id = ent->driver_data;
326 db->ioaddr = pci_resource_start(pdev, 0);
327
328 db->pdev = pdev;
329 db->init = 1;
330
331 dev->base_addr = db->ioaddr;
332 dev->irq = pdev->irq;
333 pci_set_drvdata(pdev, dev);
334
335 /* Register some necessary functions */
336 dev->open = &uli526x_open;
337 dev->hard_start_xmit = &uli526x_start_xmit;
338 dev->stop = &uli526x_stop;
339 dev->get_stats = &uli526x_get_stats;
340 dev->set_multicast_list = &uli526x_set_filter_mode;
341 dev->ethtool_ops = &netdev_ethtool_ops;
342 spin_lock_init(&db->lock);
343
344
345 /* read 64 word srom data */
346 for (i = 0; i < 64; i++)
347 ((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
348
349 /* Set Node address */
350 if(((u16 *) db->srom)[0] == 0xffff) /* SROM absent, so read MAC address from ID Table */
351 {
352 outl(0x10000, db->ioaddr + DCR0); //Diagnosis mode
353 outl(0x1c0, db->ioaddr + DCR13); //Reset dianostic pointer port
354 outl(0, db->ioaddr + DCR14); //Clear reset port
355 outl(0x10, db->ioaddr + DCR14); //Reset ID Table pointer
356 outl(0, db->ioaddr + DCR14); //Clear reset port
357 outl(0, db->ioaddr + DCR13); //Clear CR13
358 outl(0x1b0, db->ioaddr + DCR13); //Select ID Table access port
359 //Read MAC address from CR14
360 for (i = 0; i < 6; i++)
361 dev->dev_addr[i] = inl(db->ioaddr + DCR14);
362 //Read end
363 outl(0, db->ioaddr + DCR13); //Clear CR13
364 outl(0, db->ioaddr + DCR0); //Clear CR0
365 udelay(10);
366 }
367 else /*Exist SROM*/
368 {
369 for (i = 0; i < 6; i++)
370 dev->dev_addr[i] = db->srom[20 + i];
371 }
372 err = register_netdev (dev);
373 if (err)
374 goto err_out_res;
375
376 printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
377
378 for (i = 0; i < 6; i++)
379 printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
380 printk(", irq %d.\n", dev->irq);
381
382 pci_set_master(pdev);
383
384 return 0;
385
386err_out_res:
387 pci_release_regions(pdev);
388err_out_disable:
389 pci_disable_device(pdev);
390err_out_free:
391 pci_set_drvdata(pdev, NULL);
392 free_netdev(dev);
393
394 return err;
395}
396
397
398static void __devexit uli526x_remove_one (struct pci_dev *pdev)
399{
400 struct net_device *dev = pci_get_drvdata(pdev);
401 struct uli526x_board_info *db = netdev_priv(dev);
402
403 ULI526X_DBUG(0, "uli526x_remove_one()", 0);
404
405 if (dev) {
406 pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
407 DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
408 db->desc_pool_dma_ptr);
409 pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
410 db->buf_pool_ptr, db->buf_pool_dma_ptr);
411 unregister_netdev(dev);
412 pci_release_regions(pdev);
413 free_netdev(dev); /* free board information */
414 pci_set_drvdata(pdev, NULL);
415 }
416
417 ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
418}
419
420
421/*
422 * Open the interface.
423 * The interface is opened whenever "ifconfig" actives it.
424 */
425
426static int uli526x_open(struct DEVICE *dev)
427{
428 int ret;
429 struct uli526x_board_info *db = netdev_priv(dev);
430
431 ULI526X_DBUG(0, "uli526x_open", 0);
432
433 ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
434 if (ret)
435 return ret;
436
437 /* system variable init */
438 db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
439 if(m526x_id == 0x526310b9)
440 {
441 //printk("is 5263\n");
442 db->cr6_data = CR6_DEFAULT_A | uli526x_cr6_user_set;
443 }
444 db->tx_packet_cnt = 0;
445 db->rx_avail_cnt = 0;
446 db->link_failed = 1;
447 netif_carrier_off(dev);
448 db->wait_reset = 0;
449
450 db->NIC_capability = 0xf; /* All capability*/
451 db->PHY_reg4 = 0x1e0;
452
453 /* CR6 operation mode decision */
454 db->cr6_data |= ULI526X_TXTH_256;
455 db->cr0_data = CR0_DEFAULT;
456
457 /* Initilize ULI526X board */
458 uli526x_init(dev);
459
460 /* Active System Interface */
461 netif_wake_queue(dev);
462
463 /* set and active a timer process */
464 init_timer(&db->timer);
465 db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
466 db->timer.data = (unsigned long)dev;
467 db->timer.function = &uli526x_timer;
468 add_timer(&db->timer);
469
470 return 0;
471}
472
473
474/* Initilize ULI526X board
475 * Reset ULI526X board
476 * Initilize TX/Rx descriptor chain structure
477 * Send the set-up frame
478 * Enable Tx/Rx machine
479 */
480
481static void uli526x_init(struct DEVICE *dev)
482{
483 struct uli526x_board_info *db = netdev_priv(dev);
484 unsigned long ioaddr = db->ioaddr;
485 u8 phy_tmp;
486 u16 phy_value;
487 u16 phy_reg_reset;
488
489 ULI526X_DBUG(0, "uli526x_init()", 0);
490
491 /* Reset M526x MAC controller */
492 outl(ULI526X_RESET, ioaddr + DCR0); /* RESET MAC */
493 udelay(100);
494 outl(db->cr0_data, ioaddr + DCR0);
495 udelay(5);
496
497 /* Phy addr : In some boards,M5261/M5263 phy address != 1 */
498 db->phy_addr = 1;
499 for(phy_tmp=0;phy_tmp<32;phy_tmp++)
500 {
501 phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
502 if(phy_value != 0xffff&&phy_value!=0)
503 {
504 db->phy_addr = phy_tmp;
505 break;
506 }
507 }
508 if(phy_tmp == 32)
509 printk(KERN_WARNING "Can not find the phy address!!!");
510 /* Parser SROM and media mode */
511 db->media_mode = uli526x_media_mode;
512
513 //add by clearzhang 2004/7/8
514 /* RESET Phyxcer Chip by GPR port bit 7 */
515 //outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */
516 //outl(0x0, ioaddr + DCR12); /* Clear RESET signal */
517
518 /* Phyxcer capability setting */
519 phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
520 phy_reg_reset = (phy_reg_reset | 0x8000);
521 phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
522 udelay(500);
523
524 /* Process Phyxcer Media Mode */
525 uli526x_set_phyxcer(db);
526
527 /* Media Mode Process */
528 if ( !(db->media_mode & ULI526X_AUTO) )
529 db->op_mode = db->media_mode; /* Force Mode */
530
531 /* Initiliaze Transmit/Receive decriptor and CR3/4 */
532 uli526x_descriptor_init(db, ioaddr);
533
534 /* Init CR6 to program M526X operation */
535 update_cr6(db->cr6_data, ioaddr);
536
537 /* Send setup frame */
538 send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
539
540 /* Init CR7, interrupt active bit */
541 db->cr7_data = CR7_DEFAULT;
542 outl(db->cr7_data, ioaddr + DCR7);
543
544 /* Init CR15, Tx jabber and Rx watchdog timer */
545 outl(db->cr15_data, ioaddr + DCR15);
546
547 /* Enable ULI526X Tx/Rx function */
548 db->cr6_data |= CR6_RXSC | CR6_TXSC;
549 update_cr6(db->cr6_data, ioaddr);
550}
551
552
553/*
554 * Hardware start transmission.
555 * Send a packet to media from the upper layer.
556 */
557
558static int uli526x_start_xmit(struct sk_buff *skb, struct DEVICE *dev)
559{
560 struct uli526x_board_info *db = netdev_priv(dev);
561 struct tx_desc *txptr;
562 unsigned long flags;
563
564 ULI526X_DBUG(0, "uli526x_start_xmit", 0);
565
566 /* Resource flag check */
567 netif_stop_queue(dev);
568
569 /* Too large packet check */
570 if (skb->len > MAX_PACKET_SIZE) {
571 printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
572 dev_kfree_skb(skb);
573 return 0;
574 }
575
576 spin_lock_irqsave(&db->lock, flags);
577
578 /* No Tx resource check, it never happen nromally */
579 if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
580 spin_unlock_irqrestore(&db->lock, flags);
581 printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
582 return 1;
583 }
584
585 /* Disable NIC interrupt */
586 outl(0, dev->base_addr + DCR7);
587
588 /* transmit this packet */
589 txptr = db->tx_insert_ptr;
590 memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
591 txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
592
593 /* Point to next transmit free descriptor */
594 db->tx_insert_ptr = txptr->next_tx_desc;
595
596 /* Transmit Packet Process */
597 if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
598 txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */
599 db->tx_packet_cnt++; /* Ready to send */
600 outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
601 dev->trans_start = jiffies; /* saved time stamp */
602 }
603
604 /* Tx resource check */
605 if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
606 netif_wake_queue(dev);
607
608 /* Restore CR7 to enable interrupt */
609 spin_unlock_irqrestore(&db->lock, flags);
610 outl(db->cr7_data, dev->base_addr + DCR7);
611
612 /* free this SKB */
613 dev_kfree_skb(skb);
614
615 return 0;
616}
617
618
619/*
620 * Stop the interface.
621 * The interface is stopped when it is brought.
622 */
623
624static int uli526x_stop(struct DEVICE *dev)
625{
626 struct uli526x_board_info *db = netdev_priv(dev);
627 unsigned long ioaddr = dev->base_addr;
628
629 ULI526X_DBUG(0, "uli526x_stop", 0);
630
631 /* disable system */
632 netif_stop_queue(dev);
633
634 /* deleted timer */
635 del_timer_sync(&db->timer);
636
637 /* Reset & stop ULI526X board */
638 outl(ULI526X_RESET, ioaddr + DCR0);
639 udelay(5);
640 phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
641
642 /* free interrupt */
643 free_irq(dev->irq, dev);
644
645 /* free allocated rx buffer */
646 uli526x_free_rxbuffer(db);
647
648#if 0
649 /* show statistic counter */
650 printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
651 db->tx_fifo_underrun, db->tx_excessive_collision,
652 db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
653 db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
654 db->reset_fatal, db->reset_TXtimeout);
655#endif
656
657 return 0;
658}
659
660
661/*
662 * M5261/M5263 insterrupt handler
663 * receive the packet to upper layer, free the transmitted packet
664 */
665
666static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
667{
668 struct DEVICE *dev = dev_id;
669 struct uli526x_board_info *db = netdev_priv(dev);
670 unsigned long ioaddr = dev->base_addr;
671 unsigned long flags;
672
673 //ULI526X_DBUG(0, "uli526x_interrupt()", 0);
674
675 if (!dev) {
676 ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
677 return IRQ_NONE;
678 }
679
680 //outl(0, ioaddr + DCR7);
681 spin_lock_irqsave(&db->lock, flags);
682 outl(0, ioaddr + DCR7);
683
684 /* Got ULI526X status */
685 db->cr5_data = inl(ioaddr + DCR5);
686 outl(db->cr5_data, ioaddr + DCR5);
687 if ( !(db->cr5_data & 0x180c1) ) {
688 spin_unlock_irqrestore(&db->lock, flags);
689 outl(db->cr7_data, ioaddr + DCR7);
690 return IRQ_HANDLED;
691 }
692
693 /* Disable all interrupt in CR7 to solve the interrupt edge problem */
694 //outl(0, ioaddr + DCR7);
695
696 /* Check system status */
697 if (db->cr5_data & 0x2000) {
698 /* system bus error happen */
699 ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
700 db->reset_fatal++;
701 db->wait_reset = 1; /* Need to RESET */
702 spin_unlock_irqrestore(&db->lock, flags);
703 return IRQ_HANDLED;
704 }
705
706 /* Received the coming packet */
707 if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
708 uli526x_rx_packet(dev, db);
709
710 /* reallocate rx descriptor buffer */
711 if (db->rx_avail_cnt<RX_DESC_CNT)
712 allocate_rx_buffer(db);
713
714 /* Free the transmitted descriptor */
715 if ( db->cr5_data & 0x01)
716 uli526x_free_tx_pkt(dev, db);
717
718 /* Restore CR7 to enable interrupt mask */
719 outl(db->cr7_data, ioaddr + DCR7);
720
721 spin_unlock_irqrestore(&db->lock, flags);
722 return IRQ_HANDLED;
723}
724
725
726/*
727 * Free TX resource after TX complete
728 */
729
730static void uli526x_free_tx_pkt(struct DEVICE *dev, struct uli526x_board_info * db)
731{
732 struct tx_desc *txptr;
733// unsigned long ioaddr = dev->base_addr;
734 u32 tdes0;
735
736 txptr = db->tx_remove_ptr;
737 while(db->tx_packet_cnt) {
738 tdes0 = le32_to_cpu(txptr->tdes0);
739 /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
740 if (tdes0 & 0x80000000)
741 break;
742
743 /* A packet sent completed */
744 db->tx_packet_cnt--;
745 db->stats.tx_packets++;
746
747 /* Transmit statistic counter */
748 if ( tdes0 != 0x7fffffff ) {
749 /* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
750 db->stats.collisions += (tdes0 >> 3) & 0xf;
751 db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
752 if (tdes0 & TDES0_ERR_MASK) {
753 db->stats.tx_errors++;
754 if (tdes0 & 0x0002) { /* UnderRun */
755 db->tx_fifo_underrun++;
756 if ( !(db->cr6_data & CR6_SFT) ) {
757 db->cr6_data = db->cr6_data | CR6_SFT;
758 update_cr6(db->cr6_data, db->ioaddr);
759 }
760 }
761 if (tdes0 & 0x0100)
762 db->tx_excessive_collision++;
763 if (tdes0 & 0x0200)
764 db->tx_late_collision++;
765 if (tdes0 & 0x0400)
766 db->tx_no_carrier++;
767 if (tdes0 & 0x0800)
768 db->tx_loss_carrier++;
769 if (tdes0 & 0x4000)
770 db->tx_jabber_timeout++;
771 }
772 }
773
774 txptr = txptr->next_tx_desc;
775 }/* End of while */
776
777 /* Update TX remove pointer to next */
778 db->tx_remove_ptr = txptr;
779
780 /* Resource available check */
781 if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
782 netif_wake_queue(dev); /* Active upper layer, send again */
783}
784
785
786/*
787 * Receive the come packet and pass to upper layer
788 */
789
790static void uli526x_rx_packet(struct DEVICE *dev, struct uli526x_board_info * db)
791{
792 struct rx_desc *rxptr;
793 struct sk_buff *skb;
794 int rxlen;
795 u32 rdes0;
796
797 rxptr = db->rx_ready_ptr;
798
799 while(db->rx_avail_cnt) {
800 rdes0 = le32_to_cpu(rxptr->rdes0);
801 if (rdes0 & 0x80000000) /* packet owner check */
802 {
803 break;
804 }
805
806 db->rx_avail_cnt--;
807 db->interval_rx_cnt++;
808
809 pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
810 if ( (rdes0 & 0x300) != 0x300) {
811 /* A packet without First/Last flag */
812 /* reuse this SKB */
813 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
814 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
815 } else {
816 /* A packet with First/Last flag */
817 rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
818
819 /* error summary bit check */
820 if (rdes0 & 0x8000) {
821 /* This is a error packet */
822 //printk(DRV_NAME ": rdes0: %lx\n", rdes0);
823 db->stats.rx_errors++;
824 if (rdes0 & 1)
825 db->stats.rx_fifo_errors++;
826 if (rdes0 & 2)
827 db->stats.rx_crc_errors++;
828 if (rdes0 & 0x80)
829 db->stats.rx_length_errors++;
830 }
831
832 if ( !(rdes0 & 0x8000) ||
833 ((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
834 skb = rxptr->rx_skb_ptr;
835
836 /* Good packet, send to upper layer */
837 /* Shorst packet used new SKB */
838 if ( (rxlen < RX_COPY_SIZE) &&
839 ( (skb = dev_alloc_skb(rxlen + 2) )
840 != NULL) ) {
841 /* size less than COPY_SIZE, allocate a rxlen SKB */
842 skb->dev = dev;
843 skb_reserve(skb, 2); /* 16byte align */
844 memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
845 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
846 } else {
847 skb->dev = dev;
848 skb_put(skb, rxlen);
849 }
850 skb->protocol = eth_type_trans(skb, dev);
851 netif_rx(skb);
852 dev->last_rx = jiffies;
853 db->stats.rx_packets++;
854 db->stats.rx_bytes += rxlen;
855
856 } else {
857 /* Reuse SKB buffer when the packet is error */
858 ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
859 uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
860 }
861 }
862
863 rxptr = rxptr->next_rx_desc;
864 }
865
866 db->rx_ready_ptr = rxptr;
867}
868
869
870/*
871 * Get statistics from driver.
872 */
873
874static struct net_device_stats * uli526x_get_stats(struct DEVICE *dev)
875{
876 struct uli526x_board_info *db = netdev_priv(dev);
877
878 ULI526X_DBUG(0, "uli526x_get_stats", 0);
879 return &db->stats;
880}
881
882
883/*
884 * Set ULI526X multicast address
885 */
886
887static void uli526x_set_filter_mode(struct DEVICE * dev)
888{
889 struct uli526x_board_info *db = dev->priv;
890 unsigned long flags;
891
892 ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
893 spin_lock_irqsave(&db->lock, flags);
894
895 if (dev->flags & IFF_PROMISC) {
896 ULI526X_DBUG(0, "Enable PROM Mode", 0);
897 db->cr6_data |= CR6_PM | CR6_PBF;
898 update_cr6(db->cr6_data, db->ioaddr);
899 spin_unlock_irqrestore(&db->lock, flags);
900 return;
901 }
902
903 if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
904 ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
905 db->cr6_data &= ~(CR6_PM | CR6_PBF);
906 db->cr6_data |= CR6_PAM;
907 spin_unlock_irqrestore(&db->lock, flags);
908 return;
909 }
910
911 ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
912 send_filter_frame(dev, dev->mc_count); /* M5261/M5263 */
913 spin_unlock_irqrestore(&db->lock, flags);
914}
915
916static void
917ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
918{
919 //struct e1000_hw *hw = &adapter->hw;
920
921 {
922
923 ecmd->supported = (SUPPORTED_10baseT_Half |
924 SUPPORTED_10baseT_Full |
925 SUPPORTED_100baseT_Half |
926 SUPPORTED_100baseT_Full |
927 SUPPORTED_Autoneg |
928 SUPPORTED_MII);
929
930 ecmd->advertising = (ADVERTISED_10baseT_Half |
931 ADVERTISED_10baseT_Full |
932 ADVERTISED_100baseT_Half |
933 ADVERTISED_100baseT_Full |
934 ADVERTISED_Autoneg |
935 ADVERTISED_MII);
936
937
938 ecmd->port = PORT_MII;
939 ecmd->phy_address = db->phy_addr;
940
941 ecmd->transceiver = XCVR_EXTERNAL;
942
943
944 }
945
946
947 ecmd->speed = 10;
948 ecmd->duplex = DUPLEX_HALF;
949
950 if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
951 {
952 ecmd->speed = 100;
953 }
954 if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
955 {
956 ecmd->duplex = DUPLEX_FULL;
957 }
958 if(db->link_failed)
959 {
960 ecmd->speed = -1;
961 ecmd->duplex = -1;
962 }
963
964 if (db->media_mode & ULI526X_AUTO)
965 {
966 ecmd->autoneg = AUTONEG_ENABLE;
967 }
968
969
970}
971
972static void netdev_get_drvinfo(struct net_device *dev,
973 struct ethtool_drvinfo *info)
974{
975 struct uli526x_board_info *np = netdev_priv(dev);
976
977 strcpy(info->driver, DRV_NAME);
978 strcpy(info->version, DRV_VERSION);
979 if (np->pdev)
980 strcpy(info->bus_info, pci_name(np->pdev));
981 else
982 sprintf(info->bus_info, "EISA 0x%lx %d",
983 dev->base_addr, dev->irq);
984}
985
986static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
987 struct uli526x_board_info *np = netdev_priv(dev);
988
989 ULi_ethtool_gset(np, cmd);
990
991 return 0;
992}
993
994static u32 netdev_get_link(struct net_device *dev) {
995 struct uli526x_board_info *np = netdev_priv(dev);
996
997 if(np->link_failed)
998 return 0;
999 else
1000 return 1;
1001}
1002
1003static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
1004{
1005 wol->supported = WAKE_PHY | WAKE_MAGIC;
1006 wol->wolopts = 0;
1007}
1008
1009static struct ethtool_ops netdev_ethtool_ops = {
1010 .get_drvinfo = netdev_get_drvinfo,
1011 .get_settings = netdev_get_settings,
1012 .get_link = netdev_get_link,
1013 .get_wol = uli526x_get_wol,
1014};
1015
1016/*
1017 * A periodic timer routine
1018 * Dynamic media sense, allocate Rx buffer...
1019 */
1020
1021static void uli526x_timer(unsigned long data)
1022{
1023 u32 tmp_cr8;
1024 unsigned char tmp_cr12=0;
1025 struct DEVICE *dev = (struct DEVICE *) data;
1026 struct uli526x_board_info *db = netdev_priv(dev);
1027 unsigned long flags;
1028 u8 TmpSpeed=10;
1029
1030 //ULI526X_DBUG(0, "uli526x_timer()", 0);
1031 spin_lock_irqsave(&db->lock, flags);
1032
1033
1034 /* Dynamic reset ULI526X : system error or transmit time-out */
1035 tmp_cr8 = inl(db->ioaddr + DCR8);
1036 if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
1037 db->reset_cr8++;
1038 db->wait_reset = 1;
1039 }
1040 db->interval_rx_cnt = 0;
1041
1042 /* TX polling kick monitor */
1043 if ( db->tx_packet_cnt &&
1044 time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
1045 outl(0x1, dev->base_addr + DCR1); // Tx polling again
1046
1047 // TX Timeout
1048 if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
1049 db->reset_TXtimeout++;
1050 db->wait_reset = 1;
1051 printk( "%s: Tx timeout - resetting\n",
1052 dev->name);
1053 }
1054 }
1055
1056 if (db->wait_reset) {
1057 ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
1058 db->reset_count++;
1059 uli526x_dynamic_reset(dev);
1060 db->timer.expires = ULI526X_TIMER_WUT;
1061 add_timer(&db->timer);
1062 spin_unlock_irqrestore(&db->lock, flags);
1063 return;
1064 }
1065
1066 /* Link status check, Dynamic media type change */
1067 if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
1068 tmp_cr12 = 3;
1069
1070 if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
1071 /* Link Failed */
1072 ULI526X_DBUG(0, "Link Failed", tmp_cr12);
1073 netif_carrier_off(dev);
1074 printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
1075 db->link_failed = 1;
1076
1077 /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
1078 /* AUTO don't need */
1079 if ( !(db->media_mode & 0x8) )
1080 phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
1081
1082 /* AUTO mode, if INT phyxcer link failed, select EXT device */
1083 if (db->media_mode & ULI526X_AUTO) {
1084 db->cr6_data&=~0x00000200; /* bit9=0, HD mode */
1085 update_cr6(db->cr6_data, db->ioaddr);
1086 }
1087 } else
1088 if ((tmp_cr12 & 0x3) && db->link_failed) {
1089 ULI526X_DBUG(0, "Link link OK", tmp_cr12);
1090 db->link_failed = 0;
1091
1092 /* Auto Sense Speed */
1093 if ( (db->media_mode & ULI526X_AUTO) &&
1094 uli526x_sense_speed(db) )
1095 db->link_failed = 1;
1096 uli526x_process_mode(db);
1097
1098 if(db->link_failed==0)
1099 {
1100 if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
1101 {
1102 TmpSpeed = 100;
1103 }
1104 if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
1105 {
1106 printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
1107 }
1108 else
1109 {
1110 printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
1111 }
1112 netif_carrier_on(dev);
1113 }
1114 /* SHOW_MEDIA_TYPE(db->op_mode); */
1115 }
1116 else if(!(tmp_cr12 & 0x3) && db->link_failed)
1117 {
1118 if(db->init==1)
1119 {
1120 printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
1121 netif_carrier_off(dev);
1122 }
1123 }
1124 db->init=0;
1125
1126 /* Timer active again */
1127 db->timer.expires = ULI526X_TIMER_WUT;
1128 add_timer(&db->timer);
1129 spin_unlock_irqrestore(&db->lock, flags);
1130}
1131
1132
1133/*
1134 * Dynamic reset the ULI526X board
1135 * Stop ULI526X board
1136 * Free Tx/Rx allocated memory
1137 * Reset ULI526X board
1138 * Re-initilize ULI526X board
1139 */
1140
1141static void uli526x_dynamic_reset(struct DEVICE *dev)
1142{
1143 struct uli526x_board_info *db = netdev_priv(dev);
1144
1145 ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
1146
1147 /* Sopt MAC controller */
1148 db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
1149 update_cr6(db->cr6_data, dev->base_addr);
1150 outl(0, dev->base_addr + DCR7); /* Disable Interrupt */
1151 outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
1152
1153 /* Disable upper layer interface */
1154 netif_stop_queue(dev);
1155
1156 /* Free Rx Allocate buffer */
1157 uli526x_free_rxbuffer(db);
1158
1159 /* system variable init */
1160 db->tx_packet_cnt = 0;
1161 db->rx_avail_cnt = 0;
1162 db->link_failed = 1;
1163 db->init=1;
1164 db->wait_reset = 0;
1165
1166 /* Re-initilize ULI526X board */
1167 uli526x_init(dev);
1168
1169 /* Restart upper layer interface */
1170 netif_wake_queue(dev);
1171}
1172
1173
1174/*
1175 * free all allocated rx buffer
1176 */
1177
1178static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
1179{
1180 ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
1181
1182 /* free allocated rx buffer */
1183 while (db->rx_avail_cnt) {
1184 dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
1185 db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
1186 db->rx_avail_cnt--;
1187 }
1188}
1189
1190
1191/*
1192 * Reuse the SK buffer
1193 */
1194
1195static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
1196{
1197 struct rx_desc *rxptr = db->rx_insert_ptr;
1198
1199 if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
1200 rxptr->rx_skb_ptr = skb;
1201 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
1202 wmb();
1203 rxptr->rdes0 = cpu_to_le32(0x80000000);
1204 db->rx_avail_cnt++;
1205 db->rx_insert_ptr = rxptr->next_rx_desc;
1206 } else
1207 ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
1208}
1209
1210
1211/*
1212 * Initialize transmit/Receive descriptor
1213 * Using Chain structure, and allocate Tx/Rx buffer
1214 */
1215
1216static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
1217{
1218 struct tx_desc *tmp_tx;
1219 struct rx_desc *tmp_rx;
1220 unsigned char *tmp_buf;
1221 dma_addr_t tmp_tx_dma, tmp_rx_dma;
1222 dma_addr_t tmp_buf_dma;
1223 int i;
1224
1225 ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
1226
1227 /* tx descriptor start pointer */
1228 db->tx_insert_ptr = db->first_tx_desc;
1229 db->tx_remove_ptr = db->first_tx_desc;
1230 outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */
1231
1232 /* rx descriptor start pointer */
1233 db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
1234 db->first_rx_desc_dma = db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
1235 db->rx_insert_ptr = db->first_rx_desc;
1236 db->rx_ready_ptr = db->first_rx_desc;
1237 outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */
1238
1239 /* Init Transmit chain */
1240 tmp_buf = db->buf_pool_start;
1241 tmp_buf_dma = db->buf_pool_dma_start;
1242 tmp_tx_dma = db->first_tx_desc_dma;
1243 for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
1244 tmp_tx->tx_buf_ptr = tmp_buf;
1245 tmp_tx->tdes0 = cpu_to_le32(0);
1246 tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */
1247 tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
1248 tmp_tx_dma += sizeof(struct tx_desc);
1249 tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
1250 tmp_tx->next_tx_desc = tmp_tx + 1;
1251 tmp_buf = tmp_buf + TX_BUF_ALLOC;
1252 tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
1253 }
1254 (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
1255 tmp_tx->next_tx_desc = db->first_tx_desc;
1256
1257 /* Init Receive descriptor chain */
1258 tmp_rx_dma=db->first_rx_desc_dma;
1259 for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
1260 tmp_rx->rdes0 = cpu_to_le32(0);
1261 tmp_rx->rdes1 = cpu_to_le32(0x01000600);
1262 tmp_rx_dma += sizeof(struct rx_desc);
1263 tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
1264 tmp_rx->next_rx_desc = tmp_rx + 1;
1265 }
1266 (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
1267 tmp_rx->next_rx_desc = db->first_rx_desc;
1268
1269 /* pre-allocate Rx buffer */
1270 allocate_rx_buffer(db);
1271}
1272
1273
1274/*
1275 * Update CR6 value
1276 * Firstly stop ULI526X , then written value and start
1277 */
1278
1279static void update_cr6(u32 cr6_data, unsigned long ioaddr)
1280{
1281
1282 outl(cr6_data, ioaddr + DCR6);
1283 udelay(5);
1284}
1285
1286
1287/*
1288 * Send a setup frame for M5261/M5263
1289 * This setup frame initilize ULI526X address filter mode
1290 */
1291
1292static void send_filter_frame(struct DEVICE *dev, int mc_cnt)
1293{
1294 struct uli526x_board_info *db = netdev_priv(dev);
1295 struct dev_mc_list *mcptr;
1296 struct tx_desc *txptr;
1297 u16 * addrptr;
1298 u32 * suptr;
1299 int i;
1300
1301 ULI526X_DBUG(0, "send_filter_frame()", 0);
1302
1303 txptr = db->tx_insert_ptr;
1304 suptr = (u32 *) txptr->tx_buf_ptr;
1305
1306 /* Node address */
1307 addrptr = (u16 *) dev->dev_addr;
1308 *suptr++ = addrptr[0];
1309 *suptr++ = addrptr[1];
1310 *suptr++ = addrptr[2];
1311
1312 /* broadcast address */
1313 *suptr++ = 0xffff;
1314 *suptr++ = 0xffff;
1315 *suptr++ = 0xffff;
1316
1317 /* fit the multicast address */
1318 for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
1319 addrptr = (u16 *) mcptr->dmi_addr;
1320 *suptr++ = addrptr[0];
1321 *suptr++ = addrptr[1];
1322 *suptr++ = addrptr[2];
1323 }
1324
1325 for (; i<14; i++) {
1326 *suptr++ = 0xffff;
1327 *suptr++ = 0xffff;
1328 *suptr++ = 0xffff;
1329 }
1330
1331 /* prepare the setup frame */
1332 db->tx_insert_ptr = txptr->next_tx_desc;
1333 txptr->tdes1 = cpu_to_le32(0x890000c0);
1334
1335 /* Resource Check and Send the setup packet */
1336 if (db->tx_packet_cnt < TX_DESC_CNT) {
1337 /* Resource Empty */
1338 db->tx_packet_cnt++;
1339 txptr->tdes0 = cpu_to_le32(0x80000000);
1340 update_cr6(db->cr6_data | 0x2000, dev->base_addr);
1341 outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */
1342 update_cr6(db->cr6_data, dev->base_addr);
1343 dev->trans_start = jiffies;
1344 } else
1345 printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
1346}
1347
1348
1349/*
1350 * Allocate rx buffer,
1351 * As possible as allocate maxiumn Rx buffer
1352 */
1353
1354static void allocate_rx_buffer(struct uli526x_board_info *db)
1355{
1356 struct rx_desc *rxptr;
1357 struct sk_buff *skb;
1358
1359 rxptr = db->rx_insert_ptr;
1360
1361 while(db->rx_avail_cnt < RX_DESC_CNT) {
1362 if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
1363 break;
1364 rxptr->rx_skb_ptr = skb; /* FIXME (?) */
1365 rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
1366 wmb();
1367 rxptr->rdes0 = cpu_to_le32(0x80000000);
1368 rxptr = rxptr->next_rx_desc;
1369 db->rx_avail_cnt++;
1370 }
1371
1372 db->rx_insert_ptr = rxptr;
1373}
1374
1375
1376/*
1377 * Read one word data from the serial ROM
1378 */
1379
1380static u16 read_srom_word(long ioaddr, int offset)
1381{
1382 int i;
1383 u16 srom_data = 0;
1384 long cr9_ioaddr = ioaddr + DCR9;
1385
1386 outl(CR9_SROM_READ, cr9_ioaddr);
1387 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
1388
1389 /* Send the Read Command 110b */
1390 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
1391 SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
1392 SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
1393
1394 /* Send the offset */
1395 for (i = 5; i >= 0; i--) {
1396 srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
1397 SROM_CLK_WRITE(srom_data, cr9_ioaddr);
1398 }
1399
1400 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
1401
1402 for (i = 16; i > 0; i--) {
1403 outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
1404 udelay(5);
1405 srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
1406 outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
1407 udelay(5);
1408 }
1409
1410 outl(CR9_SROM_READ, cr9_ioaddr);
1411 return srom_data;
1412}
1413
1414
1415/*
1416 * Auto sense the media mode
1417 */
1418
1419static u8 uli526x_sense_speed(struct uli526x_board_info * db)
1420{
1421 u8 ErrFlag = 0;
1422 u16 phy_mode;
1423
1424 phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
1425 phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
1426
1427 if ( (phy_mode & 0x24) == 0x24 ) {
1428
1429 phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
1430 if(phy_mode&0x8000)
1431 phy_mode = 0x8000;
1432 else if(phy_mode&0x4000)
1433 phy_mode = 0x4000;
1434 else if(phy_mode&0x2000)
1435 phy_mode = 0x2000;
1436 else
1437 phy_mode = 0x1000;
1438
1439 /* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
1440 switch (phy_mode) {
1441 case 0x1000: db->op_mode = ULI526X_10MHF; break;
1442 case 0x2000: db->op_mode = ULI526X_10MFD; break;
1443 case 0x4000: db->op_mode = ULI526X_100MHF; break;
1444 case 0x8000: db->op_mode = ULI526X_100MFD; break;
1445 default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
1446 }
1447 } else {
1448 db->op_mode = ULI526X_10MHF;
1449 ULI526X_DBUG(0, "Link Failed :", phy_mode);
1450 ErrFlag = 1;
1451 }
1452
1453 return ErrFlag;
1454}
1455
1456
1457/*
1458 * Set 10/100 phyxcer capability
1459 * AUTO mode : phyxcer register4 is NIC capability
1460 * Force mode: phyxcer register4 is the force media
1461 */
1462
1463static void uli526x_set_phyxcer(struct uli526x_board_info *db)
1464{
1465 u16 phy_reg;
1466
1467 /* Phyxcer capability setting */
1468 phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
1469
1470 if (db->media_mode & ULI526X_AUTO) {
1471 /* AUTO Mode */
1472 phy_reg |= db->PHY_reg4;
1473 } else {
1474 /* Force Mode */
1475 switch(db->media_mode) {
1476 case ULI526X_10MHF: phy_reg |= 0x20; break;
1477 case ULI526X_10MFD: phy_reg |= 0x40; break;
1478 case ULI526X_100MHF: phy_reg |= 0x80; break;
1479 case ULI526X_100MFD: phy_reg |= 0x100; break;
1480 }
1481
1482 }
1483
1484 /* Write new capability to Phyxcer Reg4 */
1485 if ( !(phy_reg & 0x01e0)) {
1486 phy_reg|=db->PHY_reg4;
1487 db->media_mode|=ULI526X_AUTO;
1488 }
1489 phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
1490
1491 /* Restart Auto-Negotiation */
1492 phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
1493 udelay(50);
1494}
1495
1496
1497/*
1498 * Process op-mode
1499 AUTO mode : PHY controller in Auto-negotiation Mode
1500 * Force mode: PHY controller in force mode with HUB
1501 * N-way force capability with SWITCH
1502 */
1503
1504static void uli526x_process_mode(struct uli526x_board_info *db)
1505{
1506 u16 phy_reg;
1507
1508 /* Full Duplex Mode Check */
1509 if (db->op_mode & 0x4)
1510 db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */
1511 else
1512 db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */
1513
1514 update_cr6(db->cr6_data, db->ioaddr);
1515
1516 /* 10/100M phyxcer force mode need */
1517 if ( !(db->media_mode & 0x8)) {
1518 /* Forece Mode */
1519 phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
1520 if ( !(phy_reg & 0x1) ) {
1521 /* parter without N-Way capability */
1522 phy_reg = 0x0;
1523 switch(db->op_mode) {
1524 case ULI526X_10MHF: phy_reg = 0x0; break;
1525 case ULI526X_10MFD: phy_reg = 0x100; break;
1526 case ULI526X_100MHF: phy_reg = 0x2000; break;
1527 case ULI526X_100MFD: phy_reg = 0x2100; break;
1528 }
1529 phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
1530 phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
1531 }
1532 }
1533}
1534
1535
1536/*
1537 * Write a word to Phy register
1538 */
1539
1540static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
1541{
1542 u16 i;
1543 unsigned long ioaddr;
1544
1545 if(chip_id == PCI_ULI5263_ID)
1546 {
1547 phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
1548 return;
1549 }
1550 /* M5261/M5263 Chip */
1551 ioaddr = iobase + DCR9;
1552
1553 /* Send 33 synchronization clock to Phy controller */
1554 for (i = 0; i < 35; i++)
1555 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1556
1557 /* Send start command(01) to Phy */
1558 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
1559 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1560
1561 /* Send write command(01) to Phy */
1562 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
1563 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1564
1565 /* Send Phy address */
1566 for (i = 0x10; i > 0; i = i >> 1)
1567 phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
1568
1569 /* Send register address */
1570 for (i = 0x10; i > 0; i = i >> 1)
1571 phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
1572
1573 /* written trasnition */
1574 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1575 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
1576
1577 /* Write a word data to PHY controller */
1578 for ( i = 0x8000; i > 0; i >>= 1)
1579 phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
1580
1581}
1582
1583
1584/*
1585 * Read a word data from phy register
1586 */
1587
1588static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
1589{
1590 int i;
1591 u16 phy_data;
1592 unsigned long ioaddr;
1593
1594 if(chip_id == PCI_ULI5263_ID)
1595 return phy_readby_cr10(iobase, phy_addr, offset);
1596 /* M5261/M5263 Chip */
1597 ioaddr = iobase + DCR9;
1598
1599 /* Send 33 synchronization clock to Phy controller */
1600 for (i = 0; i < 35; i++)
1601 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1602
1603 /* Send start command(01) to Phy */
1604 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
1605 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1606
1607 /* Send read command(10) to Phy */
1608 phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
1609 phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
1610
1611 /* Send Phy address */
1612 for (i = 0x10; i > 0; i = i >> 1)
1613 phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
1614
1615 /* Send register address */
1616 for (i = 0x10; i > 0; i = i >> 1)
1617 phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
1618
1619 /* Skip transition state */
1620 phy_read_1bit(ioaddr, chip_id);
1621
1622 /* read 16bit data */
1623 for (phy_data = 0, i = 0; i < 16; i++) {
1624 phy_data <<= 1;
1625 phy_data |= phy_read_1bit(ioaddr, chip_id);
1626 }
1627
1628 return phy_data;
1629}
1630
1631static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
1632{
1633 unsigned long ioaddr,cr10_value;
1634
1635 ioaddr = iobase + DCR10;
1636 cr10_value = phy_addr;
1637 cr10_value = (cr10_value<<5) + offset;
1638 cr10_value = (cr10_value<<16) + 0x08000000;
1639 outl(cr10_value,ioaddr);
1640 udelay(1);
1641 while(1)
1642 {
1643 cr10_value = inl(ioaddr);
1644 if(cr10_value&0x10000000)
1645 break;
1646 }
1647 return (cr10_value&0x0ffff);
1648}
1649
1650static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
1651{
1652 unsigned long ioaddr,cr10_value;
1653
1654 ioaddr = iobase + DCR10;
1655 cr10_value = phy_addr;
1656 cr10_value = (cr10_value<<5) + offset;
1657 cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
1658 outl(cr10_value,ioaddr);
1659 udelay(1);
1660}
1661/*
1662 * Write one bit data to Phy Controller
1663 */
1664
1665static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
1666{
1667 outl(phy_data , ioaddr); /* MII Clock Low */
1668 udelay(1);
1669 outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */
1670 udelay(1);
1671 outl(phy_data , ioaddr); /* MII Clock Low */
1672 udelay(1);
1673}
1674
1675
1676/*
1677 * Read one bit phy data from PHY controller
1678 */
1679
1680static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
1681{
1682 u16 phy_data;
1683
1684 outl(0x50000 , ioaddr);
1685 udelay(1);
1686 phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
1687 outl(0x40000 , ioaddr);
1688 udelay(1);
1689
1690 return phy_data;
1691}
1692
1693
1694static struct pci_device_id uli526x_pci_tbl[] = {
1695 { 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
1696 { 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
1697 { 0, }
1698};
1699MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
1700
1701
1702static struct pci_driver uli526x_driver = {
1703 .name = "uli526x",
1704 .id_table = uli526x_pci_tbl,
1705 .probe = uli526x_init_one,
1706 .remove = __devexit_p(uli526x_remove_one),
1707};
1708
1709MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
1710MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
1711MODULE_LICENSE("GPL");
1712
1713MODULE_PARM(debug, "i");
1714MODULE_PARM(mode, "i");
1715MODULE_PARM(cr6set, "i");
1716MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
1717MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
1718
1719/* Description:
1720 * when user used insmod to add module, system invoked init_module()
1721 * to initilize and register.
1722 */
1723
1724static int __init uli526x_init_module(void)
1725{
1726 int rc;
1727
1728 printk(version);
1729 printed_version = 1;
1730
1731 ULI526X_DBUG(0, "init_module() ", debug);
1732
1733 if (debug)
1734 uli526x_debug = debug; /* set debug flag */
1735 if (cr6set)
1736 uli526x_cr6_user_set = cr6set;
1737
1738 switch(mode) {
1739 case ULI526X_10MHF:
1740 case ULI526X_100MHF:
1741 case ULI526X_10MFD:
1742 case ULI526X_100MFD:
1743 uli526x_media_mode = mode;
1744 break;
1745 default:uli526x_media_mode = ULI526X_AUTO;
1746 break;
1747 }
1748
1749 rc = pci_module_init(&uli526x_driver);
1750 if (rc < 0)
1751 return rc;
1752
1753 return 0;
1754}
1755
1756
1757/*
1758 * Description:
1759 * when user used rmmod to delete module, system invoked clean_module()
1760 * to un-register all registered services.
1761 */
1762
1763static void __exit uli526x_cleanup_module(void)
1764{
1765 ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
1766 pci_unregister_driver(&uli526x_driver);
1767}
1768
1769module_init(uli526x_init_module);
1770module_exit(uli526x_cleanup_module);
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-19 23:10:09 -0500