diff options
author | John Linn <john.linn@xilinx.com> | 2008-07-07 16:17:48 -0400 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2008-07-07 16:19:56 -0400 |
commit | 1191828f8e6454ebb51da3e1da21912f1783e469 (patch) | |
tree | d76f6f08840dc6616477600ed42858b816b1f00e | |
parent | 73422392734bb68c8ff8bc74ce1bbdc32f1b639a (diff) |
Input: add new serio driver for Xilinx XPS PS2 IP
Added a new driver for Xilinx XPS PS2 IP. This driver is
a flat driver to better match the Linux driver pattern.
Signed-off-by: Sadanand <sadanan@xilinx.com>
Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-rw-r--r-- | drivers/input/serio/Kconfig | 10 | ||||
-rw-r--r-- | drivers/input/serio/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/serio/xilinx_ps2.c | 380 |
3 files changed, 391 insertions, 0 deletions
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index ec4b6610f730..27d70d326ff3 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig | |||
@@ -190,4 +190,14 @@ config SERIO_RAW | |||
190 | To compile this driver as a module, choose M here: the | 190 | To compile this driver as a module, choose M here: the |
191 | module will be called serio_raw. | 191 | module will be called serio_raw. |
192 | 192 | ||
193 | config SERIO_XILINX_XPS_PS2 | ||
194 | tristate "Xilinx XPS PS/2 Controller Support" | ||
195 | depends on PPC | ||
196 | help | ||
197 | This driver supports XPS PS/2 IP from the Xilinx EDK on | ||
198 | PowerPC platform. | ||
199 | |||
200 | To compile this driver as a module, choose M here: the | ||
201 | module will be called xilinx_ps2. | ||
202 | |||
193 | endif | 203 | endif |
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile index 38b886887cbc..9b6c8135955f 100644 --- a/drivers/input/serio/Makefile +++ b/drivers/input/serio/Makefile | |||
@@ -21,3 +21,4 @@ obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o | |||
21 | obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o | 21 | obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o |
22 | obj-$(CONFIG_SERIO_LIBPS2) += libps2.o | 22 | obj-$(CONFIG_SERIO_LIBPS2) += libps2.o |
23 | obj-$(CONFIG_SERIO_RAW) += serio_raw.o | 23 | obj-$(CONFIG_SERIO_RAW) += serio_raw.o |
24 | obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o | ||
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c new file mode 100644 index 000000000000..0ed044d5e685 --- /dev/null +++ b/drivers/input/serio/xilinx_ps2.c | |||
@@ -0,0 +1,380 @@ | |||
1 | /* | ||
2 | * Xilinx XPS PS/2 device driver | ||
3 | * | ||
4 | * (c) 2005 MontaVista Software, Inc. | ||
5 | * (c) 2008 Xilinx, Inc. | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | * | ||
12 | * You should have received a copy of the GNU General Public License along | ||
13 | * with this program; if not, write to the Free Software Foundation, Inc., | ||
14 | * 675 Mass Ave, Cambridge, MA 02139, USA. | ||
15 | */ | ||
16 | |||
17 | |||
18 | #include <linux/module.h> | ||
19 | #include <linux/serio.h> | ||
20 | #include <linux/interrupt.h> | ||
21 | #include <linux/errno.h> | ||
22 | #include <linux/init.h> | ||
23 | #include <linux/list.h> | ||
24 | #include <linux/io.h> | ||
25 | |||
26 | #include <linux/of_device.h> | ||
27 | #include <linux/of_platform.h> | ||
28 | |||
29 | #define DRIVER_NAME "xilinx_ps2" | ||
30 | |||
31 | /* Register offsets for the xps2 device */ | ||
32 | #define XPS2_SRST_OFFSET 0x00000000 /* Software Reset register */ | ||
33 | #define XPS2_STATUS_OFFSET 0x00000004 /* Status register */ | ||
34 | #define XPS2_RX_DATA_OFFSET 0x00000008 /* Receive Data register */ | ||
35 | #define XPS2_TX_DATA_OFFSET 0x0000000C /* Transmit Data register */ | ||
36 | #define XPS2_GIER_OFFSET 0x0000002C /* Global Interrupt Enable reg */ | ||
37 | #define XPS2_IPISR_OFFSET 0x00000030 /* Interrupt Status register */ | ||
38 | #define XPS2_IPIER_OFFSET 0x00000038 /* Interrupt Enable register */ | ||
39 | |||
40 | /* Reset Register Bit Definitions */ | ||
41 | #define XPS2_SRST_RESET 0x0000000A /* Software Reset */ | ||
42 | |||
43 | /* Status Register Bit Positions */ | ||
44 | #define XPS2_STATUS_RX_FULL 0x00000001 /* Receive Full */ | ||
45 | #define XPS2_STATUS_TX_FULL 0x00000002 /* Transmit Full */ | ||
46 | |||
47 | /* Bit definitions for ISR/IER registers. Both the registers have the same bit | ||
48 | * definitions and are only defined once. */ | ||
49 | #define XPS2_IPIXR_WDT_TOUT 0x00000001 /* Watchdog Timeout Interrupt */ | ||
50 | #define XPS2_IPIXR_TX_NOACK 0x00000002 /* Transmit No ACK Interrupt */ | ||
51 | #define XPS2_IPIXR_TX_ACK 0x00000004 /* Transmit ACK (Data) Interrupt */ | ||
52 | #define XPS2_IPIXR_RX_OVF 0x00000008 /* Receive Overflow Interrupt */ | ||
53 | #define XPS2_IPIXR_RX_ERR 0x00000010 /* Receive Error Interrupt */ | ||
54 | #define XPS2_IPIXR_RX_FULL 0x00000020 /* Receive Data Interrupt */ | ||
55 | |||
56 | /* Mask for all the Transmit Interrupts */ | ||
57 | #define XPS2_IPIXR_TX_ALL (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK) | ||
58 | |||
59 | /* Mask for all the Receive Interrupts */ | ||
60 | #define XPS2_IPIXR_RX_ALL (XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR | \ | ||
61 | XPS2_IPIXR_RX_FULL) | ||
62 | |||
63 | /* Mask for all the Interrupts */ | ||
64 | #define XPS2_IPIXR_ALL (XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL | \ | ||
65 | XPS2_IPIXR_WDT_TOUT) | ||
66 | |||
67 | /* Global Interrupt Enable mask */ | ||
68 | #define XPS2_GIER_GIE_MASK 0x80000000 | ||
69 | |||
70 | struct xps2data { | ||
71 | int irq; | ||
72 | u32 phys_addr; | ||
73 | u32 remap_size; | ||
74 | spinlock_t lock; | ||
75 | u8 rxb; /* Rx buffer */ | ||
76 | void __iomem *base_address; /* virt. address of control registers */ | ||
77 | unsigned int dfl; | ||
78 | struct serio serio; /* serio */ | ||
79 | }; | ||
80 | |||
81 | /************************************/ | ||
82 | /* XPS PS/2 data transmission calls */ | ||
83 | /************************************/ | ||
84 | |||
85 | /* | ||
86 | * xps2_recv() will attempt to receive a byte of data from the PS/2 port. | ||
87 | */ | ||
88 | static int xps2_recv(struct xps2data *drvdata, u8 *byte) | ||
89 | { | ||
90 | u32 sr; | ||
91 | int status = -1; | ||
92 | |||
93 | /* If there is data available in the PS/2 receiver, read it */ | ||
94 | sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET); | ||
95 | if (sr & XPS2_STATUS_RX_FULL) { | ||
96 | *byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET); | ||
97 | status = 0; | ||
98 | } | ||
99 | |||
100 | return status; | ||
101 | } | ||
102 | |||
103 | /*********************/ | ||
104 | /* Interrupt handler */ | ||
105 | /*********************/ | ||
106 | static irqreturn_t xps2_interrupt(int irq, void *dev_id) | ||
107 | { | ||
108 | struct xps2data *drvdata = dev_id; | ||
109 | u32 intr_sr; | ||
110 | u8 c; | ||
111 | int status; | ||
112 | |||
113 | /* Get the PS/2 interrupts and clear them */ | ||
114 | intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET); | ||
115 | out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr); | ||
116 | |||
117 | /* Check which interrupt is active */ | ||
118 | if (intr_sr & XPS2_IPIXR_RX_OVF) | ||
119 | printk(KERN_WARNING "%s: receive overrun error\n", | ||
120 | drvdata->serio.name); | ||
121 | |||
122 | if (intr_sr & XPS2_IPIXR_RX_ERR) | ||
123 | drvdata->dfl |= SERIO_PARITY; | ||
124 | |||
125 | if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT)) | ||
126 | drvdata->dfl |= SERIO_TIMEOUT; | ||
127 | |||
128 | if (intr_sr & XPS2_IPIXR_RX_FULL) { | ||
129 | status = xps2_recv(drvdata, &drvdata->rxb); | ||
130 | |||
131 | /* Error, if a byte is not received */ | ||
132 | if (status) { | ||
133 | printk(KERN_ERR | ||
134 | "%s: wrong rcvd byte count (%d)\n", | ||
135 | drvdata->serio.name, status); | ||
136 | } else { | ||
137 | c = drvdata->rxb; | ||
138 | serio_interrupt(&drvdata->serio, c, drvdata->dfl); | ||
139 | drvdata->dfl = 0; | ||
140 | } | ||
141 | } | ||
142 | |||
143 | if (intr_sr & XPS2_IPIXR_TX_ACK) | ||
144 | drvdata->dfl = 0; | ||
145 | |||
146 | return IRQ_HANDLED; | ||
147 | } | ||
148 | |||
149 | /*******************/ | ||
150 | /* serio callbacks */ | ||
151 | /*******************/ | ||
152 | |||
153 | /* | ||
154 | * sxps2_write() sends a byte out through the PS/2 interface. | ||
155 | */ | ||
156 | static int sxps2_write(struct serio *pserio, unsigned char c) | ||
157 | { | ||
158 | struct xps2data *drvdata = pserio->port_data; | ||
159 | unsigned long flags; | ||
160 | u32 sr; | ||
161 | int status = -1; | ||
162 | |||
163 | spin_lock_irqsave(&drvdata->lock, flags); | ||
164 | |||
165 | /* If the PS/2 transmitter is empty send a byte of data */ | ||
166 | sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET); | ||
167 | if (!(sr & XPS2_STATUS_TX_FULL)) { | ||
168 | out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c); | ||
169 | status = 0; | ||
170 | } | ||
171 | |||
172 | spin_unlock_irqrestore(&drvdata->lock, flags); | ||
173 | |||
174 | return status; | ||
175 | } | ||
176 | |||
177 | /* | ||
178 | * sxps2_open() is called when a port is open by the higher layer. | ||
179 | */ | ||
180 | static int sxps2_open(struct serio *pserio) | ||
181 | { | ||
182 | struct xps2data *drvdata = pserio->port_data; | ||
183 | int retval; | ||
184 | |||
185 | retval = request_irq(drvdata->irq, &xps2_interrupt, 0, | ||
186 | DRIVER_NAME, drvdata); | ||
187 | if (retval) { | ||
188 | printk(KERN_ERR | ||
189 | "%s: Couldn't allocate interrupt %d\n", | ||
190 | drvdata->serio.name, drvdata->irq); | ||
191 | return retval; | ||
192 | } | ||
193 | |||
194 | /* start reception by enabling the interrupts */ | ||
195 | out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK); | ||
196 | out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL); | ||
197 | (void)xps2_recv(drvdata, &drvdata->rxb); | ||
198 | |||
199 | return 0; /* success */ | ||
200 | } | ||
201 | |||
202 | /* | ||
203 | * sxps2_close() frees the interrupt. | ||
204 | */ | ||
205 | static void sxps2_close(struct serio *pserio) | ||
206 | { | ||
207 | struct xps2data *drvdata = pserio->port_data; | ||
208 | |||
209 | /* Disable the PS2 interrupts */ | ||
210 | out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00); | ||
211 | out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00); | ||
212 | free_irq(drvdata->irq, drvdata); | ||
213 | } | ||
214 | |||
215 | /*********************/ | ||
216 | /* Device setup code */ | ||
217 | /*********************/ | ||
218 | |||
219 | static int xps2_setup(struct device *dev, struct resource *regs_res, | ||
220 | struct resource *irq_res) | ||
221 | { | ||
222 | struct xps2data *drvdata; | ||
223 | struct serio *serio; | ||
224 | unsigned long remap_size; | ||
225 | int retval; | ||
226 | |||
227 | if (!dev) | ||
228 | return -EINVAL; | ||
229 | |||
230 | if (!regs_res || !irq_res) { | ||
231 | dev_err(dev, "IO resource(s) not found\n"); | ||
232 | return -EINVAL; | ||
233 | } | ||
234 | |||
235 | drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL); | ||
236 | if (!drvdata) { | ||
237 | dev_err(dev, "Couldn't allocate device private record\n"); | ||
238 | return -ENOMEM; | ||
239 | } | ||
240 | |||
241 | dev_set_drvdata(dev, drvdata); | ||
242 | |||
243 | spin_lock_init(&drvdata->lock); | ||
244 | drvdata->irq = irq_res->start; | ||
245 | |||
246 | remap_size = regs_res->end - regs_res->start + 1; | ||
247 | if (!request_mem_region(regs_res->start, remap_size, DRIVER_NAME)) { | ||
248 | dev_err(dev, "Couldn't lock memory region at 0x%08X\n", | ||
249 | (unsigned int)regs_res->start); | ||
250 | retval = -EBUSY; | ||
251 | goto failed1; | ||
252 | } | ||
253 | |||
254 | /* Fill in configuration data and add them to the list */ | ||
255 | drvdata->phys_addr = regs_res->start; | ||
256 | drvdata->remap_size = remap_size; | ||
257 | drvdata->base_address = ioremap(regs_res->start, remap_size); | ||
258 | if (drvdata->base_address == NULL) { | ||
259 | dev_err(dev, "Couldn't ioremap memory at 0x%08X\n", | ||
260 | (unsigned int)regs_res->start); | ||
261 | retval = -EFAULT; | ||
262 | goto failed2; | ||
263 | } | ||
264 | |||
265 | /* Disable all the interrupts, just in case */ | ||
266 | out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0); | ||
267 | |||
268 | /* Reset the PS2 device and abort any current transaction, to make sure | ||
269 | * we have the PS2 in a good state */ | ||
270 | out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET); | ||
271 | |||
272 | dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n", | ||
273 | drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq); | ||
274 | |||
275 | serio = &drvdata->serio; | ||
276 | serio->id.type = SERIO_8042; | ||
277 | serio->write = sxps2_write; | ||
278 | serio->open = sxps2_open; | ||
279 | serio->close = sxps2_close; | ||
280 | serio->port_data = drvdata; | ||
281 | serio->dev.parent = dev; | ||
282 | snprintf(serio->name, sizeof(serio->name), | ||
283 | "Xilinx XPS PS/2 at %08X", drvdata->phys_addr); | ||
284 | snprintf(serio->phys, sizeof(serio->phys), | ||
285 | "xilinxps2/serio at %08X", drvdata->phys_addr); | ||
286 | serio_register_port(serio); | ||
287 | |||
288 | return 0; /* success */ | ||
289 | |||
290 | failed2: | ||
291 | release_mem_region(regs_res->start, remap_size); | ||
292 | failed1: | ||
293 | kfree(drvdata); | ||
294 | dev_set_drvdata(dev, NULL); | ||
295 | |||
296 | return retval; | ||
297 | } | ||
298 | |||
299 | /***************************/ | ||
300 | /* OF Platform Bus Support */ | ||
301 | /***************************/ | ||
302 | |||
303 | static int __devinit xps2_of_probe(struct of_device *ofdev, const struct | ||
304 | of_device_id * match) | ||
305 | { | ||
306 | struct resource r_irq; /* Interrupt resources */ | ||
307 | struct resource r_mem; /* IO mem resources */ | ||
308 | int rc = 0; | ||
309 | |||
310 | printk(KERN_INFO "Device Tree Probing \'%s\'\n", | ||
311 | ofdev->node->name); | ||
312 | |||
313 | /* Get iospace for the device */ | ||
314 | rc = of_address_to_resource(ofdev->node, 0, &r_mem); | ||
315 | if (rc) { | ||
316 | dev_err(&ofdev->dev, "invalid address\n"); | ||
317 | return rc; | ||
318 | } | ||
319 | |||
320 | /* Get IRQ for the device */ | ||
321 | rc = of_irq_to_resource(ofdev->node, 0, &r_irq); | ||
322 | if (rc == NO_IRQ) { | ||
323 | dev_err(&ofdev->dev, "no IRQ found\n"); | ||
324 | return rc; | ||
325 | } | ||
326 | |||
327 | return xps2_setup(&ofdev->dev, &r_mem, &r_irq); | ||
328 | } | ||
329 | |||
330 | static int __devexit xps2_of_remove(struct of_device *of_dev) | ||
331 | { | ||
332 | struct device *dev = &of_dev->dev; | ||
333 | struct xps2data *drvdata; | ||
334 | |||
335 | if (!dev) | ||
336 | return -EINVAL; | ||
337 | |||
338 | drvdata = dev_get_drvdata(dev); | ||
339 | |||
340 | serio_unregister_port(&drvdata->serio); | ||
341 | iounmap(drvdata->base_address); | ||
342 | release_mem_region(drvdata->phys_addr, drvdata->remap_size); | ||
343 | kfree(drvdata); | ||
344 | |||
345 | dev_set_drvdata(dev, NULL); | ||
346 | |||
347 | return 0; /* success */ | ||
348 | } | ||
349 | |||
350 | /* Match table for of_platform binding */ | ||
351 | static struct of_device_id xps2_of_match[] __devinitdata = { | ||
352 | { .compatible = "xlnx,xps-ps2-1.00.a", }, | ||
353 | { /* end of list */ }, | ||
354 | }; | ||
355 | MODULE_DEVICE_TABLE(of, xps2_of_match); | ||
356 | |||
357 | static struct of_platform_driver xps2_of_driver = { | ||
358 | .name = DRIVER_NAME, | ||
359 | .match_table = xps2_of_match, | ||
360 | .probe = xps2_of_probe, | ||
361 | .remove = __devexit_p(xps2_of_remove), | ||
362 | }; | ||
363 | |||
364 | static int __init xps2_init(void) | ||
365 | { | ||
366 | return of_register_platform_driver(&xps2_of_driver); | ||
367 | } | ||
368 | |||
369 | static void __exit xps2_cleanup(void) | ||
370 | { | ||
371 | of_unregister_platform_driver(&xps2_of_driver); | ||
372 | } | ||
373 | |||
374 | module_init(xps2_init); | ||
375 | module_exit(xps2_cleanup); | ||
376 | |||
377 | MODULE_AUTHOR("Xilinx, Inc."); | ||
378 | MODULE_DESCRIPTION("Xilinx XPS PS/2 driver"); | ||
379 | MODULE_LICENSE("GPL"); | ||
380 | |||