mtd: sst25l: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set writebufsize to the flash page size because it is the maximum amount of
data it writes at a time.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

1 files changed, 1 insertions, 0 deletions

diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index a665eba96e7f..8b9ffafcc401 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -402,6 +402,7 @@ static int __devinit sst25l_probe(struct spi_device *spi)
         flash->mtd.flags        = MTD_CAP_NORFLASH;
         flash->mtd.erasesize    = flash_info->erase_size;
         flash->mtd.writesize    = flash_info->page_size;
+        flash->mtd.writebufsize = flash_info->page_size;
         flash->mtd.size         = flash_info->page_size * flash_info->nr_pages;
         flash->mtd._erase       = sst25l_erase;
         flash->mtd._read                = sst25l_read;