IP22ZILOG: fix lockup and sysrq

 - fix lockup when switching from early console to real console
 - make sysrq reliable
 - fix panic, if sysrq is issued before console is opened

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 107 insertions, 163 deletions

diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 174f09e42f6b..5f389ee26fca 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -31,25 +31,6 @@
 unsigned long sgi_gfxaddr;
 EXPORT_SYMBOL_GPL(sgi_gfxaddr);
 
-/*
- * Stop-A is originally a Sun thing that isn't standard on IP22 so to avoid
- * accidents it's disabled by default on IP22.
- *
- * FIXME: provide a mechanism to change the value of stop_a_enabled.
- */
-int stop_a_enabled;
-
-void ip22_do_break(void)
-{
-        if (!stop_a_enabled)
-                return;
-
-        printk("\n");
-        ArcEnterInteractiveMode();
-}
-
-EXPORT_SYMBOL(ip22_do_break);
-
 extern void ip22_be_init(void) __init;
 
 void __init plat_mem_setup(void)
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
index f3257f708ef9..9c95bc0398ad 100644
--- a/drivers/serial/ip22zilog.c
+++ b/drivers/serial/ip22zilog.c
@@ -45,8 +45,6 @@
 
 #include "ip22zilog.h"
 
-void ip22_do_break(void);
-
 /*
  * On IP22 we need to delay after register accesses but we do not need to
  * flush writes.
@@ -81,12 +79,9 @@ struct uart_ip22zilog_port {
 #define IP22ZILOG_FLAG_REGS_HELD        0x00000040
 #define IP22ZILOG_FLAG_TX_STOPPED       0x00000080
 #define IP22ZILOG_FLAG_TX_ACTIVE        0x00000100
+#define IP22ZILOG_FLAG_RESET_DONE       0x00000200
 
-        unsigned int                    cflag;
-
-        /* L1-A keyboard break state.  */
-        int                             kbd_id;
-        int                             l1_down;
+        unsigned int                    tty_break;
 
         unsigned char                   parity_mask;
         unsigned char                   prev_status;
@@ -250,13 +245,26 @@ static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up,
         }
 }
 
-static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
-                                   struct zilog_channel *channel)
+#define Rx_BRK 0x0100                   /* BREAK event software flag.  */
+#define Rx_SYS 0x0200                   /* SysRq event software flag.  */
+
+static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
+                                                  struct zilog_channel *channel)
 {
-        struct tty_struct *tty = up->port.info->tty;    /* XXX info==NULL? */
+        struct tty_struct *tty;
+        unsigned char ch, flag;
+        unsigned int r1;
+
+        tty = NULL;
+        if (up->port.info != NULL &&
+            up->port.info->tty != NULL)
+                tty = up->port.info->tty;
 
-        while (1) {
-                unsigned char ch, r1, flag;
+        for (;;) {
+                ch = readb(&channel->control);
+                ZSDELAY();
+                if (!(ch & Rx_CH_AV))
+                        break;
 
                 r1 = read_zsreg(channel, R1);
                 if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
@@ -265,43 +273,26 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
                         ZS_WSYNC(channel);
                 }
 
-                ch = readb(&channel->control);
-                ZSDELAY();
-
-                /* This funny hack depends upon BRK_ABRT not interfering
-                 * with the other bits we care about in R1.
-                 */
-                if (ch & BRK_ABRT)
-                        r1 |= BRK_ABRT;
-
                 ch = readb(&channel->data);
                 ZSDELAY();
 
                 ch &= up->parity_mask;
 
-                if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) {
-                        /* Wait for BREAK to deassert to avoid potentially
-                         * confusing the PROM.
-                         */
-                        while (1) {
-                                ch = readb(&channel->control);
-                                ZSDELAY();
-                                if (!(ch & BRK_ABRT))
-                                        break;
-                        }
-                        ip22_do_break();
-                        return;
-                }
+                /* Handle the null char got when BREAK is removed.  */
+                if (!ch)
+                        r1 |= up->tty_break;
 
                 /* A real serial line, record the character and status.  */
                 flag = TTY_NORMAL;
                 up->port.icount.rx++;
-                if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
-                        if (r1 & BRK_ABRT) {
-                                r1 &= ~(PAR_ERR | CRC_ERR);
+                if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | Rx_SYS | Rx_BRK)) {
+                        up->tty_break = 0;
+
+                        if (r1 & (Rx_SYS | Rx_BRK)) {
                                 up->port.icount.brk++;
-                                if (uart_handle_break(&up->port))
-                                        goto next_char;
+                                if (r1 & Rx_SYS)
+                                        continue;
+                                r1 &= ~(PAR_ERR | CRC_ERR);
                         }
                         else if (r1 & PAR_ERR)
                                 up->port.icount.parity++;
@@ -310,30 +301,21 @@ static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
                         if (r1 & Rx_OVR)
                                 up->port.icount.overrun++;
                         r1 &= up->port.read_status_mask;
-                        if (r1 & BRK_ABRT)
+                        if (r1 & Rx_BRK)
                                 flag = TTY_BREAK;
                         else if (r1 & PAR_ERR)
                                 flag = TTY_PARITY;
                         else if (r1 & CRC_ERR)
                                 flag = TTY_FRAME;
                 }
-                if (uart_handle_sysrq_char(&up->port, ch))
-                        goto next_char;
 
-                if (up->port.ignore_status_mask == 0xff ||
-                    (r1 & up->port.ignore_status_mask) == 0)
-                        tty_insert_flip_char(tty, ch, flag);
+                if (uart_handle_sysrq_char(&up->port, ch))
+                        continue;
 
-                if (r1 & Rx_OVR)
-                        tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-        next_char:
-                ch = readb(&channel->control);
-                ZSDELAY();
-                if (!(ch & Rx_CH_AV))
-                        break;
+                if (tty)
+                        uart_insert_char(&up->port, r1, Rx_OVR, ch, flag);
         }
-
-        tty_flip_buffer_push(tty);
+        return tty;
 }
 
 static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
@@ -348,6 +330,15 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
         ZSDELAY();
         ZS_WSYNC(channel);
 
+        if (up->curregs[R15] & BRKIE) {
+                if ((status & BRK_ABRT) && !(up->prev_status & BRK_ABRT)) {
+                        if (uart_handle_break(&up->port))
+                                up->tty_break = Rx_SYS;
+                        else
+                                up->tty_break = Rx_BRK;
+                }
+        }
+
         if (ZS_WANTS_MODEM_STATUS(up)) {
                 if (status & SYNC)
                         up->port.icount.dsr++;
@@ -356,10 +347,10 @@ static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
                  * But it does not tell us which bit has changed, we have to keep
                  * track of this ourselves.
                  */
-                if ((status & DCD) ^ up->prev_status)
+                if ((status ^ up->prev_status) ^ DCD)
                         uart_handle_dcd_change(&up->port,
                                                (status & DCD));
-                if ((status & CTS) ^ up->prev_status)
+                if ((status ^ up->prev_status) ^ CTS)
                         uart_handle_cts_change(&up->port,
                                                (status & CTS));
 
@@ -447,19 +438,21 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
         while (up) {
                 struct zilog_channel *channel
                         = ZILOG_CHANNEL_FROM_PORT(&up->port);
+                struct tty_struct *tty;
                 unsigned char r3;
 
                 spin_lock(&up->port.lock);
                 r3 = read_zsreg(channel, R3);
 
                 /* Channel A */
+                tty = NULL;
                 if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
                         writeb(RES_H_IUS, &channel->control);
                         ZSDELAY();
                         ZS_WSYNC(channel);
 
                         if (r3 & CHARxIP)
-                                ip22zilog_receive_chars(up, channel);
+                                tty = ip22zilog_receive_chars(up, channel);
                         if (r3 & CHAEXT)
                                 ip22zilog_status_handle(up, channel);
                         if (r3 & CHATxIP)
@@ -467,18 +460,22 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
                 }
                 spin_unlock(&up->port.lock);
 
+                if (tty)
+                        tty_flip_buffer_push(tty);
+
                 /* Channel B */
                 up = up->next;
                 channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
 
                 spin_lock(&up->port.lock);
+                tty = NULL;
                 if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
                         writeb(RES_H_IUS, &channel->control);
                         ZSDELAY();
                         ZS_WSYNC(channel);
 
                         if (r3 & CHBRxIP)
-                                ip22zilog_receive_chars(up, channel);
+                                tty = ip22zilog_receive_chars(up, channel);
                         if (r3 & CHBEXT)
                                 ip22zilog_status_handle(up, channel);
                         if (r3 & CHBTxIP)
@@ -486,6 +483,9 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
                 }
                 spin_unlock(&up->port.lock);
 
+                if (tty)
+                        tty_flip_buffer_push(tty);
+
                 up = up->next;
         }
 
@@ -681,11 +681,46 @@ static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
         spin_unlock_irqrestore(&port->lock, flags);
 }
 
+static void __ip22zilog_reset(struct uart_ip22zilog_port *up)
+{
+        struct zilog_channel *channel;
+        int i;
+
+        if (up->flags & IP22ZILOG_FLAG_RESET_DONE)
+                return;
+
+        /* Let pending transmits finish.  */
+        channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+        for (i = 0; i < 1000; i++) {
+                unsigned char stat = read_zsreg(channel, R1);
+                if (stat & ALL_SNT)
+                        break;
+                udelay(100);
+        }
+
+        if (!ZS_IS_CHANNEL_A(up)) {
+                up++;
+                channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+        }
+        write_zsreg(channel, R9, FHWRES);
+        ZSDELAY_LONG();
+        (void) read_zsreg(channel, R0);
+
+        up->flags |= IP22ZILOG_FLAG_RESET_DONE;
+        up->next->flags |= IP22ZILOG_FLAG_RESET_DONE;
+}
+
 static void __ip22zilog_startup(struct uart_ip22zilog_port *up)
 {
         struct zilog_channel *channel;
 
         channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+        __ip22zilog_reset(up);
+
+        __load_zsregs(channel, up->curregs);
+        /* set master interrupt enable */
+        write_zsreg(channel, R9, up->curregs[R9]);
         up->prev_status = readb(&channel->control);
 
         /* Enable receiver and transmitter.  */
@@ -859,8 +894,6 @@ ip22zilog_set_termios(struct uart_port *port, struct ktermios *termios,
         else
                 up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS;
 
-        up->cflag = termios->c_cflag;
-
         ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
         uart_update_timeout(port, termios->c_cflag, baud);
 
@@ -992,74 +1025,29 @@ ip22zilog_console_write(struct console *con, const char *s, unsigned int count)
         spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
-void
-ip22serial_console_termios(struct console *con, char *options)
-{
-        int baud = 9600, bits = 8, cflag;
-        int parity = 'n';
-        int flow = 'n';
-
-        if (options)
-                uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-        cflag = CREAD | HUPCL | CLOCAL;
-
-        switch (baud) {
-                case 150: cflag |= B150; break;
-                case 300: cflag |= B300; break;
-                case 600: cflag |= B600; break;
-                case 1200: cflag |= B1200; break;
-                case 2400: cflag |= B2400; break;
-                case 4800: cflag |= B4800; break;
-                case 9600: cflag |= B9600; break;
-                case 19200: cflag |= B19200; break;
-                case 38400: cflag |= B38400; break;
-                default: baud = 9600; cflag |= B9600; break;
-        }
-
-        con->cflag = cflag | CS8;                       /* 8N1 */
-
-        uart_update_timeout(&ip22zilog_port_table[con->index].port, cflag, baud);
-}
-
 static int __init ip22zilog_console_setup(struct console *con, char *options)
 {
         struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
         unsigned long flags;
-        int baud, brg;
-
-        printk("Console: ttyS%d (IP22-Zilog)\n", con->index);
+        int baud = 9600, bits = 8;
+        int parity = 'n';
+        int flow = 'n';
 
-        /* Get firmware console settings.  */
-        ip22serial_console_termios(con, options);
+        up->flags |= IP22ZILOG_FLAG_IS_CONS;
 
-        /* Firmware console speed is limited to 150-->38400 baud so
-         * this hackish cflag thing is OK.
-         */
-        switch (con->cflag & CBAUD) {
-        case B150: baud = 150; break;
-        case B300: baud = 300; break;
-        case B600: baud = 600; break;
-        case B1200: baud = 1200; break;
-        case B2400: baud = 2400; break;
-        case B4800: baud = 4800; break;
-        default: case B9600: baud = 9600; break;
-        case B19200: baud = 19200; break;
-        case B38400: baud = 38400; break;
-        };
-
-        brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+        printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index);
 
         spin_lock_irqsave(&up->port.lock, flags);
 
-        up->curregs[R15] = BRKIE;
-        ip22zilog_convert_to_zs(up, con->cflag, 0, brg);
+        up->curregs[R15] |= BRKIE;
 
         __ip22zilog_startup(up);
 
         spin_unlock_irqrestore(&up->port.lock, flags);
 
-        return 0;
+        if (options)
+                uart_parse_options(options, &baud, &parity, &bits, &flow);
+        return uart_set_options(&up->port, con, baud, parity, bits, flow);
 }
 
 static struct uart_driver ip22zilog_reg;
@@ -1140,25 +1128,10 @@ static void __init ip22zilog_prepare(void)
                 up[(chip * 2) + 1].port.line = (chip * 2) + 1;
                 up[(chip * 2) + 1].flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
         }
-}
-
-static void __init ip22zilog_init_hw(void)
-{
-        int i;
-
-        for (i = 0; i < NUM_CHANNELS; i++) {
-                struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
-                struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
-                unsigned long flags;
-                int baud, brg;
 
-                spin_lock_irqsave(&up->port.lock, flags);
-
-                if (ZS_IS_CHANNEL_A(up)) {
-                        write_zsreg(channel, R9, FHWRES);
-                        ZSDELAY_LONG();
-                        (void) read_zsreg(channel, R0);
-                }
+        for (channel = 0; channel < NUM_CHANNELS; channel++) {
+                struct uart_ip22zilog_port *up = &ip22zilog_port_table[channel];
+                int brg;
 
                 /* Normal serial TTY. */
                 up->parity_mask = 0xff;
@@ -1169,16 +1142,10 @@ static void __init ip22zilog_init_hw(void)
                 up->curregs[R9] = NV | MIE;
                 up->curregs[R10] = NRZ;
                 up->curregs[R11] = TCBR | RCBR;
-                baud = 9600;
-                brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+                brg = BPS_TO_BRG(9600, ZS_CLOCK / ZS_CLOCK_DIVISOR);
                 up->curregs[R12] = (brg & 0xff);
                 up->curregs[R13] = (brg >> 8) & 0xff;
                 up->curregs[R14] = BRENAB;
-                __load_zsregs(channel, up->curregs);
-                /* set master interrupt enable */
-                write_zsreg(channel, R9, up->curregs[R9]);
-
-                spin_unlock_irqrestore(&up->port.lock, flags);
         }
 }
 
@@ -1195,8 +1162,6 @@ static int __init ip22zilog_ports_init(void)
                 panic("IP22-Zilog: Unable to register zs interrupt handler.\n");
         }
 
-        ip22zilog_init_hw();
-
         ret = uart_register_driver(&ip22zilog_reg);
         if (ret == 0) {
                 int i;
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 1030562d6ea6..a944eda4faf5 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -209,8 +209,6 @@ extern void *set_except_vector(int n, void *addr);
 extern unsigned long ebase;
 extern void per_cpu_trap_init(void);
 
-extern int stop_a_enabled;
-
 /*
  * See include/asm-ia64/system.h; prevents deadlock on SMP
  * systems.
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 6a5203fb9cf1..9963f81fea9a 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -437,7 +437,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
 #ifdef SUPPORT_SYSRQ
         if (port->sysrq) {
                 if (ch && time_before(jiffies, port->sysrq)) {
-                        handle_sysrq(ch, port->info->tty);
+                        handle_sysrq(ch, port->info ? port->info->tty : NULL);
                         port->sysrq = 0;
                         return 1;
                 }