USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.

USB_PORT_STAT_SUPER_SPEED is a made up symbol that the USB core used to
track whether USB ports had a SuperSpeed device attached.  This is a
linux-internal symbol that was used when SuperSpeed and non-SuperSpeed
devices would show up under the same xHCI roothub.  This particular
port status is never returned by external USB 3.0 hubs.  (Instead they
have a USB_PORT_STAT_SPEED_5GBPS that uses a completely different speed
mask.)

Now that the xHCI driver registers two roothubs, USB 3.0 devices will only
show up under USB 3.0 hubs.  Rip out USB_PORT_STAT_SUPER_SPEED and replace
it with calls to hub_is_superspeed().

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

3 files changed, 8 insertions, 31 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 825d803720b3..13aafd1b45e5 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -155,14 +155,14 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
-static inline char *portspeed(int portstatus)
+static inline char *portspeed(struct usb_hub *hub, int portstatus)
 {
+        if (hub_is_superspeed(hub->hdev))
+                return "5.0 Gb/s";
         if (portstatus & USB_PORT_STAT_HIGH_SPEED)
                 return "480 Mb/s";
         else if (portstatus & USB_PORT_STAT_LOW_SPEED)
                 return "1.5 Mb/s";
-        else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
-                return "5.0 Gb/s";
         else
                 return "12 Mb/s";
 }
@@ -385,9 +385,6 @@ static int hub_port_status(struct usb_hub *hub, int port1,
                         u16 tmp = *status & USB_SS_PORT_STAT_MASK;
                         if (*status & USB_SS_PORT_STAT_POWER)
                                 tmp |= USB_PORT_STAT_POWER;
-                        if ((*status & USB_SS_PORT_STAT_SPEED) ==
-                                        USB_PORT_STAT_SPEED_5GBPS)
-                                tmp |= USB_PORT_STAT_SUPER_SPEED;
                         *status = tmp;
                 }
 
@@ -795,12 +792,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
                          * USB3 protocol ports will automatically transition
                          * to Enabled state when detect an USB3.0 device attach.
                          * Do not disable USB3 protocol ports.
-                         * FIXME: USB3 root hub and external hubs are treated
-                         * differently here.
                          */
-                        if (hdev->descriptor.bDeviceProtocol != 3 ||
-                            (!hdev->parent &&
-                             !(portstatus & USB_PORT_STAT_SUPER_SPEED))) {
+                        if (!hub_is_superspeed(hdev)) {
                                 clear_port_feature(hdev, port1,
                                                    USB_PORT_FEAT_ENABLE);
                                 portstatus &= ~USB_PORT_STAT_ENABLE;
@@ -2067,14 +2060,12 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
                     (portstatus & USB_PORT_STAT_ENABLE)) {
                         if (hub_is_wusb(hub))
                                 udev->speed = USB_SPEED_WIRELESS;
-                        else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+                        else if (hub_is_superspeed(hub->hdev))
                                 udev->speed = USB_SPEED_SUPER;
                         else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
                                 udev->speed = USB_SPEED_HIGH;
                         else if (portstatus & USB_PORT_STAT_LOW_SPEED)
                                 udev->speed = USB_SPEED_LOW;
-                        else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
-                                udev->speed = USB_SPEED_SUPER;
                         else
                                 udev->speed = USB_SPEED_FULL;
                         return 0;
@@ -3067,7 +3058,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
         dev_dbg (hub_dev,
                 "port %d, status %04x, change %04x, %s\n",
-                port1, portstatus, portchange, portspeed (portstatus));
+                port1, portstatus, portchange, portspeed(hub, portstatus));
 
         if (hub->has_indicators) {
                 set_port_led(hub, port1, HUB_LED_AUTO);
@@ -3168,19 +3159,8 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
                 udev->level = hdev->level + 1;
                 udev->wusb = hub_is_wusb(hub);
 
-                /*
-                 * USB 3.0 devices are reset automatically before the connect
-                 * port status change appears, and the root hub port status
-                 * shows the correct speed.  We also get port change
-                 * notifications for USB 3.0 devices from the USB 3.0 portion of
-                 * an external USB 3.0 hub, but this isn't handled correctly yet
-                 * FIXME.
-                 */
-
-                if (!(hcd->driver->flags & HCD_USB3))
-                        udev->speed = USB_SPEED_UNKNOWN;
-                else if ((hdev->parent == NULL) &&
-                                (portstatus & USB_PORT_STAT_SUPER_SPEED))
+                /* Only USB 3.0 devices are connected to SuperSpeed hubs. */
+                if (hub_is_superspeed(hub->hdev))
                         udev->speed = USB_SPEED_SUPER;
                 else
                         udev->speed = USB_SPEED_UNKNOWN;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 770f84cb7327..a78f2ebd11b7 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -155,8 +155,6 @@ static unsigned int xhci_port_speed(unsigned int port_status)
                 return USB_PORT_STAT_LOW_SPEED;
         if (DEV_HIGHSPEED(port_status))
                 return USB_PORT_STAT_HIGH_SPEED;
-        if (DEV_SUPERSPEED(port_status))
-                return USB_PORT_STAT_SUPER_SPEED;
         /*
          * FIXME: Yes, we should check for full speed, but the core uses that as
          * a default in portspeed() in usb/core/hub.c (which is the only place
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 22afcd37bc3f..4ebaf0824179 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -109,7 +109,6 @@ struct usb_port_status {
 #define USB_PORT_STAT_TEST              0x0800
 #define USB_PORT_STAT_INDICATOR         0x1000
 /* bits 13 to 15 are reserved */
-#define USB_PORT_STAT_SUPER_SPEED       0x8000  /* Linux-internal */
 
 /*
  * Additions to wPortStatus bit field from USB 3.0