spi: add spi_ppc4xx driver

This adds a SPI driver for the SPI controller found in the IBM/AMCC
4xx PowerPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

3 files changed, 620 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 86056d1409b1..3ac072f6db35 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -171,6 +171,13 @@ config SPI_PL022
           controller. If you have an embedded system with an AMBA(R)
           bus and a PL022 controller, say Y or M here.
 
+config SPI_PPC4xx
+        tristate "PPC4xx SPI Controller"
+        depends on PPC32 && 4xx && SPI_MASTER
+        select SPI_BITBANG
+        help
+          This selects a driver for the PPC4xx SPI Controller.
+
 config SPI_PXA2XX
         tristate "PXA2xx SSP SPI master"
         depends on ARCH_PXA && EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 0f20a70b2fa9..bdd1f3a1e542 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
 obj-$(CONFIG_SPI_PL022)                 += amba-pl022.o
 obj-$(CONFIG_SPI_MPC52xx_PSC)           += mpc52xx_psc_spi.o
 obj-$(CONFIG_SPI_MPC8xxx)               += spi_mpc8xxx.o
+obj-$(CONFIG_SPI_PPC4xx)                += spi_ppc4xx.o
 obj-$(CONFIG_SPI_S3C24XX_GPIO)          += spi_s3c24xx_gpio.o
 obj-$(CONFIG_SPI_S3C24XX)               += spi_s3c24xx.o
 obj-$(CONFIG_SPI_TXX9)                  += spi_txx9.o
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
new file mode 100644
index 000000000000..140a18d6cf3e
--- /dev/null
+++ b/drivers/spi/spi_ppc4xx.c
@@ -0,0 +1,612 @@
+/*
+ * SPI_PPC4XX SPI controller driver.
+ *
+ * Copyright (C) 2007 Gary Jennejohn <garyj@denx.de>
+ * Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ * Copyright 2009 Harris Corporation, Steven A. Falco <sfalco@harris.com>
+ *
+ * Based in part on drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * The PPC4xx SPI controller has no FIFO so each sent/received byte will
+ * generate an interrupt to the CPU. This can cause high CPU utilization.
+ * This driver allows platforms to reduce the interrupt load on the CPU
+ * during SPI transfers by setting max_speed_hz via the device tree.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/of_platform.h>
+#include <linux/of_spi.h>
+#include <linux/of_gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+/* bits in mode register - bit 0 is MSb */
+
+/*
+ * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock"
+ * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock"
+ * Note: This is the inverse of CPHA.
+ */
+#define SPI_PPC4XX_MODE_SCP     (0x80 >> 3)
+
+/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */
+#define SPI_PPC4XX_MODE_SPE     (0x80 >> 4)
+
+/*
+ * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode
+ * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode
+ * Note: This is identical to SPI_LSB_FIRST.
+ */
+#define SPI_PPC4XX_MODE_RD      (0x80 >> 5)
+
+/*
+ * SPI_PPC4XX_MODE_CI = 0 means "clock idles low"
+ * SPI_PPC4XX_MODE_CI = 1 means "clock idles high"
+ * Note: This is identical to CPOL.
+ */
+#define SPI_PPC4XX_MODE_CI      (0x80 >> 6)
+
+/*
+ * SPI_PPC4XX_MODE_IL = 0 means "loopback disable"
+ * SPI_PPC4XX_MODE_IL = 1 means "loopback enable"
+ */
+#define SPI_PPC4XX_MODE_IL      (0x80 >> 7)
+
+/* bits in control register */
+/* starts a transfer when set */
+#define SPI_PPC4XX_CR_STR       (0x80 >> 7)
+
+/* bits in status register */
+/* port is busy with a transfer */
+#define SPI_PPC4XX_SR_BSY       (0x80 >> 6)
+/* RxD ready */
+#define SPI_PPC4XX_SR_RBR       (0x80 >> 7)
+
+/* clock settings (SCP and CI) for various SPI modes */
+#define SPI_CLK_MODE0   (SPI_PPC4XX_MODE_SCP | 0)
+#define SPI_CLK_MODE1   (0 | 0)
+#define SPI_CLK_MODE2   (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI)
+#define SPI_CLK_MODE3   (0 | SPI_PPC4XX_MODE_CI)
+
+#define DRIVER_NAME     "spi_ppc4xx_of"
+
+struct spi_ppc4xx_regs {
+        u8 mode;
+        u8 rxd;
+        u8 txd;
+        u8 cr;
+        u8 sr;
+        u8 dummy;
+        /*
+         * Clock divisor modulus register
+         * This uses the follwing formula:
+         *    SCPClkOut = OPBCLK/(4(CDM + 1))
+         * or
+         *    CDM = (OPBCLK/4*SCPClkOut) - 1
+         * bit 0 is the MSb!
+         */
+        u8 cdm;
+};
+
+/* SPI Controller driver's private data. */
+struct ppc4xx_spi {
+        /* bitbang has to be first */
+        struct spi_bitbang bitbang;
+        struct completion done;
+
+        u64 mapbase;
+        u64 mapsize;
+        int irqnum;
+        /* need this to set the SPI clock */
+        unsigned int opb_freq;
+
+        /* for transfers */
+        int len;
+        int count;
+        /* data buffers */
+        const unsigned char *tx;
+        unsigned char *rx;
+
+        int *gpios;
+
+        struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */
+        struct spi_master *master;
+        struct device *dev;
+};
+
+/* need this so we can set the clock in the chipselect routine */
+struct spi_ppc4xx_cs {
+        u8 mode;
+};
+
+static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+        struct ppc4xx_spi *hw;
+        u8 data;
+
+        dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+                t->tx_buf, t->rx_buf, t->len);
+
+        hw = spi_master_get_devdata(spi->master);
+
+        hw->tx = t->tx_buf;
+        hw->rx = t->rx_buf;
+        hw->len = t->len;
+        hw->count = 0;
+
+        /* send the first byte */
+        data = hw->tx ? hw->tx[0] : 0;
+        out_8(&hw->regs->txd, data);
+        out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR);
+        wait_for_completion(&hw->done);
+
+        return hw->count;
+}
+
+static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+        struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master);
+        struct spi_ppc4xx_cs *cs = spi->controller_state;
+        int scr;
+        u8 cdm = 0;
+        u32 speed;
+        u8 bits_per_word;
+
+        /* Start with the generic configuration for this device. */
+        bits_per_word = spi->bits_per_word;
+        speed = spi->max_speed_hz;
+
+        /*
+         * Modify the configuration if the transfer overrides it.  Do not allow
+         * the transfer to overwrite the generic configuration with zeros.
+         */
+        if (t) {
+                if (t->bits_per_word)
+                        bits_per_word = t->bits_per_word;
+
+                if (t->speed_hz)
+                        speed = min(t->speed_hz, spi->max_speed_hz);
+        }
+
+        if (bits_per_word != 8) {
+                dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
+                                bits_per_word);
+                return -EINVAL;
+        }
+
+        if (!speed || (speed > spi->max_speed_hz)) {
+                dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed);
+                return -EINVAL;
+        }
+
+        /* Write new configration */
+        out_8(&hw->regs->mode, cs->mode);
+
+        /* Set the clock */
+        /* opb_freq was already divided by 4 */
+        scr = (hw->opb_freq / speed) - 1;
+        if (scr > 0)
+                cdm = min(scr, 0xff);
+
+        dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed);
+
+        if (in_8(&hw->regs->cdm) != cdm)
+                out_8(&hw->regs->cdm, cdm);
+
+        spin_lock(&hw->bitbang.lock);
+        if (!hw->bitbang.busy) {
+                hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+                /* Need to ndelay here? */
+        }
+        spin_unlock(&hw->bitbang.lock);
+
+        return 0;
+}
+
+static int spi_ppc4xx_setup(struct spi_device *spi)
+{
+        struct spi_ppc4xx_cs *cs = spi->controller_state;
+
+        if (spi->bits_per_word != 8) {
+                dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
+                        spi->bits_per_word);
+                return -EINVAL;
+        }
+
+        if (!spi->max_speed_hz) {
+                dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n");
+                return -EINVAL;
+        }
+
+        if (cs == NULL) {
+                cs = kzalloc(sizeof *cs, GFP_KERNEL);
+                if (!cs)
+                        return -ENOMEM;
+                spi->controller_state = cs;
+        }
+
+        /*
+         * We set all bits of the SPI0_MODE register, so,
+         * no need to read-modify-write
+         */
+        cs->mode = SPI_PPC4XX_MODE_SPE;
+
+        switch (spi->mode & (SPI_CPHA | SPI_CPOL)) {
+        case SPI_MODE_0:
+                cs->mode |= SPI_CLK_MODE0;
+                break;
+        case SPI_MODE_1:
+                cs->mode |= SPI_CLK_MODE1;
+                break;
+        case SPI_MODE_2:
+                cs->mode |= SPI_CLK_MODE2;
+                break;
+        case SPI_MODE_3:
+                cs->mode |= SPI_CLK_MODE3;
+                break;
+        }
+
+        if (spi->mode & SPI_LSB_FIRST)
+                cs->mode |= SPI_PPC4XX_MODE_RD;
+
+        return 0;
+}
+
+static void spi_ppc4xx_chipsel(struct spi_device *spi, int value)
+{
+        struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master);
+        unsigned int cs = spi->chip_select;
+        unsigned int cspol;
+
+        /*
+         * If there are no chip selects at all, or if this is the special
+         * case of a non-existent (dummy) chip select, do nothing.
+         */
+
+        if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST)
+                return;
+
+        cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+        if (value == BITBANG_CS_INACTIVE)
+                cspol = !cspol;
+
+        gpio_set_value(hw->gpios[cs], cspol);
+}
+
+static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id)
+{
+        struct ppc4xx_spi *hw;
+        u8 status;
+        u8 data;
+        unsigned int count;
+
+        hw = (struct ppc4xx_spi *)dev_id;
+
+        status = in_8(&hw->regs->sr);
+        if (!status)
+                return IRQ_NONE;
+
+        /*
+         * BSY de-asserts one cycle after the transfer is complete.  The
+         * interrupt is asserted after the transfer is complete.  The exact
+         * relationship is not documented, hence this code.
+         */
+
+        if (unlikely(status & SPI_PPC4XX_SR_BSY)) {
+                u8 lstatus;
+                int cnt = 0;
+
+                dev_dbg(hw->dev, "got interrupt but spi still busy?\n");
+                do {
+                        ndelay(10);
+                        lstatus = in_8(&hw->regs->sr);
+                } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY);
+
+                if (cnt >= 100) {
+                        dev_err(hw->dev, "busywait: too many loops!\n");
+                        complete(&hw->done);
+                        return IRQ_HANDLED;
+                } else {
+                        /* status is always 1 (RBR) here */
+                        status = in_8(&hw->regs->sr);
+                        dev_dbg(hw->dev, "loops %d status %x\n", cnt, status);
+                }
+        }
+
+        count = hw->count;
+        hw->count++;
+
+        /* RBR triggered this interrupt.  Therefore, data must be ready. */
+        data = in_8(&hw->regs->rxd);
+        if (hw->rx)
+                hw->rx[count] = data;
+
+        count++;
+
+        if (count < hw->len) {
+                data = hw->tx ? hw->tx[count] : 0;
+                out_8(&hw->regs->txd, data);
+                out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR);
+        } else {
+                complete(&hw->done);
+        }
+
+        return IRQ_HANDLED;
+}
+
+static void spi_ppc4xx_cleanup(struct spi_device *spi)
+{
+        kfree(spi->controller_state);
+}
+
+static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
+{
+        /*
+         * On all 4xx PPC's the SPI bus is shared/multiplexed with
+         * the 2nd I2C bus. We need to enable the the SPI bus before
+         * using it.
+         */
+
+        /* need to clear bit 14 to enable SPC */
+        dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0);
+}
+
+static void free_gpios(struct ppc4xx_spi *hw)
+{
+        if (hw->master->num_chipselect) {
+                int i;
+                for (i = 0; i < hw->master->num_chipselect; i++)
+                        if (gpio_is_valid(hw->gpios[i]))
+                                gpio_free(hw->gpios[i]);
+
+                kfree(hw->gpios);
+                hw->gpios = NULL;
+        }
+}
+
+/*
+ * of_device layer stuff...
+ */
+static int __init spi_ppc4xx_of_probe(struct of_device *op,
+                                      const struct of_device_id *match)
+{
+        struct ppc4xx_spi *hw;
+        struct spi_master *master;
+        struct spi_bitbang *bbp;
+        struct resource resource;
+        struct device_node *np = op->node;
+        struct device *dev = &op->dev;
+        struct device_node *opbnp;
+        int ret;
+        int num_gpios;
+        const unsigned int *clk;
+
+        master = spi_alloc_master(dev, sizeof *hw);
+        if (master == NULL)
+                return -ENOMEM;
+        dev_set_drvdata(dev, master);
+        hw = spi_master_get_devdata(master);
+        hw->master = spi_master_get(master);
+        hw->dev = dev;
+
+        init_completion(&hw->done);
+
+        /*
+         * A count of zero implies a single SPI device without any chip-select.
+         * Note that of_gpio_count counts all gpios assigned to this spi master.
+         * This includes both "null" gpio's and real ones.
+         */
+        num_gpios = of_gpio_count(np);
+        if (num_gpios) {
+                int i;
+
+                hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL);
+                if (!hw->gpios) {
+                        ret = -ENOMEM;
+                        goto free_master;
+                }
+
+                for (i = 0; i < num_gpios; i++) {
+                        int gpio;
+                        enum of_gpio_flags flags;
+
+                        gpio = of_get_gpio_flags(np, i, &flags);
+                        hw->gpios[i] = gpio;
+
+                        if (gpio_is_valid(gpio)) {
+                                /* Real CS - set the initial state. */
+                                ret = gpio_request(gpio, np->name);
+                                if (ret < 0) {
+                                        dev_err(dev, "can't request gpio "
+                                                        "#%d: %d\n", i, ret);
+                                        goto free_gpios;
+                                }
+
+                                gpio_direction_output(gpio,
+                                                !!(flags & OF_GPIO_ACTIVE_LOW));
+                        } else if (gpio == -EEXIST) {
+                                ; /* No CS, but that's OK. */
+                        } else {
+                                dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
+                                ret = -EINVAL;
+                                goto free_gpios;
+                        }
+                }
+        }
+
+        /* Setup the state for the bitbang driver */
+        bbp = &hw->bitbang;
+        bbp->master = hw->master;
+        bbp->setup_transfer = spi_ppc4xx_setupxfer;
+        bbp->chipselect = spi_ppc4xx_chipsel;
+        bbp->txrx_bufs = spi_ppc4xx_txrx;
+        bbp->use_dma = 0;
+        bbp->master->setup = spi_ppc4xx_setup;
+        bbp->master->cleanup = spi_ppc4xx_cleanup;
+
+        /* Allocate bus num dynamically. */
+        bbp->master->bus_num = -1;
+
+        /* the spi->mode bits understood by this driver: */
+        bbp->master->mode_bits =
+                SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST;
+
+        /* this many pins in all GPIO controllers */
+        bbp->master->num_chipselect = num_gpios;
+
+        /* Get the clock for the OPB */
+        opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb");
+        if (opbnp == NULL) {
+                dev_err(dev, "OPB: cannot find node\n");
+                ret = -ENODEV;
+                goto free_gpios;
+        }
+        /* Get the clock (Hz) for the OPB */
+        clk = of_get_property(opbnp, "clock-frequency", NULL);
+        if (clk == NULL) {
+                dev_err(dev, "OPB: no clock-frequency property set\n");
+                of_node_put(opbnp);
+                ret = -ENODEV;
+                goto free_gpios;
+        }
+        hw->opb_freq = *clk;
+        hw->opb_freq >>= 2;
+        of_node_put(opbnp);
+
+        ret = of_address_to_resource(np, 0, &resource);
+        if (ret) {
+                dev_err(dev, "error while parsing device node resource\n");
+                goto free_gpios;
+        }
+        hw->mapbase = resource.start;
+        hw->mapsize = resource.end - resource.start + 1;
+
+        /* Sanity check */
+        if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) {
+                dev_err(dev, "too small to map registers\n");
+                ret = -EINVAL;
+                goto free_gpios;
+        }
+
+        /* Request IRQ */
+        hw->irqnum = irq_of_parse_and_map(np, 0);
+        ret = request_irq(hw->irqnum, spi_ppc4xx_int,
+                          IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw);
+        if (ret) {
+                dev_err(dev, "unable to allocate interrupt\n");
+                goto free_gpios;
+        }
+
+        if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) {
+                dev_err(dev, "resource unavailable\n");
+                ret = -EBUSY;
+                goto request_mem_error;
+        }
+
+        hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs));
+
+        if (!hw->regs) {
+                dev_err(dev, "unable to memory map registers\n");
+                ret = -ENXIO;
+                goto map_io_error;
+        }
+
+        spi_ppc4xx_enable(hw);
+
+        /* Finally register our spi controller */
+        dev->dma_mask = 0;
+        ret = spi_bitbang_start(bbp);
+        if (ret) {
+                dev_err(dev, "failed to register SPI master\n");
+                goto unmap_regs;
+        }
+
+        dev_info(dev, "driver initialized\n");
+        of_register_spi_devices(master, np);
+
+        return 0;
+
+unmap_regs:
+        iounmap(hw->regs);
+map_io_error:
+        release_mem_region(hw->mapbase, hw->mapsize);
+request_mem_error:
+        free_irq(hw->irqnum, hw);
+free_gpios:
+        free_gpios(hw);
+free_master:
+        dev_set_drvdata(dev, NULL);
+        spi_master_put(master);
+
+        dev_err(dev, "initialization failed\n");
+        return ret;
+}
+
+static int __exit spi_ppc4xx_of_remove(struct of_device *op)
+{
+        struct spi_master *master = dev_get_drvdata(&op->dev);
+        struct ppc4xx_spi *hw = spi_master_get_devdata(master);
+
+        spi_bitbang_stop(&hw->bitbang);
+        dev_set_drvdata(&op->dev, NULL);
+        release_mem_region(hw->mapbase, hw->mapsize);
+        free_irq(hw->irqnum, hw);
+        iounmap(hw->regs);
+        free_gpios(hw);
+        return 0;
+}
+
+static struct of_device_id spi_ppc4xx_of_match[] = {
+        { .compatible = "ibm,ppc4xx-spi", },
+        {},
+};
+
+MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match);
+
+static struct of_platform_driver spi_ppc4xx_of_driver = {
+        .match_table = spi_ppc4xx_of_match,
+        .probe = spi_ppc4xx_of_probe,
+        .remove = __exit_p(spi_ppc4xx_of_remove),
+        .driver = {
+                .name = DRIVER_NAME,
+                .owner = THIS_MODULE,
+        },
+};
+
+static int __init spi_ppc4xx_init(void)
+{
+        return of_register_platform_driver(&spi_ppc4xx_of_driver);
+}
+module_init(spi_ppc4xx_init);
+
+static void __exit spi_ppc4xx_exit(void)
+{
+        of_unregister_platform_driver(&spi_ppc4xx_of_driver);
+}
+module_exit(spi_ppc4xx_exit);
+
+MODULE_AUTHOR("Gary Jennejohn & Stefan Roese");
+MODULE_DESCRIPTION("Simple PPC4xx SPI Driver");
+MODULE_LICENSE("GPL");