iwlwifi: fix rx_chain computation

This patch fixes rx_chain computation. The code that adjusts number of
rx chains to number supported by HW was missing. Miss configuration
causes firmware error.  Note: iwlwifi supports HW with up to 3 RX
chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the
whole RX chain computation.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 46 insertions, 31 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c72f72579bea..80f2f84defa8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv)
         clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 }
 
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
 {
         return !priv->current_ht_config.is_ht ||
                ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
-                (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
-               priv->ps_mode == IWL_MIMO_PS_STATIC;
+                (priv->current_ht_config.supp_mcs_set[2] == 0));
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
-                                        u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-        u8 is_single = is_single_rx_stream(priv);
-        u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+        bool is_single = is_single_rx_stream(priv);
+        bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 
         /* # of Rx chains to use when expecting MIMO. */
         if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
-                *rx_state = 2;
+                return 2;
         else
-                *rx_state = 3;
+                return 3;
+}
 
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+        int idle_cnt;
+        bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
         /* # Rx chains when idling and maybe trying to save power */
         switch (priv->ps_mode) {
         case IWL_MIMO_PS_STATIC:
         case IWL_MIMO_PS_DYNAMIC:
-                *idle_state = (is_cam) ? 2 : 1;
+                idle_cnt = (is_cam) ? 2 : 1;
                 break;
         case IWL_MIMO_PS_NONE:
-                *idle_state = (is_cam) ? *rx_state : 1;
+                idle_cnt = (is_cam) ? active_cnt : 1;
                 break;
+        case IWL_MIMO_PS_INVALID:
         default:
-                *idle_state = 1;
+                IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+                WARN_ON(1);
+                idle_cnt = -1;
                 break;
         }
-
-        return 0;
+        return idle_cnt;
 }
 
 /**
@@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
  */
 void iwl_set_rxon_chain(struct iwl_priv *priv)
 {
-        u8 is_single = is_single_rx_stream(priv);
-        u8 idle_state, rx_state;
-
-        priv->staging_rxon.rx_chain = 0;
-        rx_state = idle_state = 3;
+        bool is_single = is_single_rx_stream(priv);
+        bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+        u8 idle_rx_cnt, active_rx_cnt;
+        u16 rx_chain;
 
         /* Tell uCode which antennas are actually connected.
          * Before first association, we assume all antennas are connected.
          * Just after first association, iwl_chain_noise_calibration()
          *    checks which antennas actually *are* connected. */
-        priv->staging_rxon.rx_chain |=
-                    cpu_to_le16(priv->hw_params.valid_rx_ant <<
-                                                 RXON_RX_CHAIN_VALID_POS);
+        rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
 
         /* How many receivers should we use? */
-        iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
-        priv->staging_rxon.rx_chain |=
-                cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
-        priv->staging_rxon.rx_chain |=
-                cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
-        if (!is_single && (rx_state >= 2) &&
-            !test_bit(STATUS_POWER_PMI, &priv->status))
+        active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+        idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+        /* correct rx chain count accoridng hw settings */
+        if (priv->hw_params.rx_chains_num < active_rx_cnt)
+                active_rx_cnt = priv->hw_params.rx_chains_num;
+
+        if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+                idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+        rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+        rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
+
+        priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+        if (!is_single && (active_rx_cnt >= 2) && is_cam)
                 priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
         else
                 priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 
-        IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+        IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+                        priv->staging_rxon.rx_chain,
+                        active_rx_cnt, idle_rx_cnt);
+
+        WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+                active_rx_cnt < idle_rx_cnt);
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);