aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid Brownell <david-b@pacbell.net>2005-05-24 20:34:51 -0400
committerGreg Kroah-Hartman <gregkh@suse.de>2005-06-22 00:52:01 -0400
commit72cd799544f2b36c2f07ceaeed6d984cb130d4f3 (patch)
treeee3f0696bd3b9b09af8f09f449eeac6c0eb3cac5
parentcc0b07ed479fd92806aef7d6dbc58b6dc6da3796 (diff)
[PATCH] I2C: add i2c driver for TPS6501x
This adds an I2C driver for the TPS6501x series of power management chips. It's used on many OMAP based boards, and this driver has been widely used in the Linux-OMAP trees over the last year or so. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat
-rw-r--r--drivers/i2c/chips/Kconfig19
-rw-r--r--drivers/i2c/chips/Makefile4
-rw-r--r--drivers/i2c/chips/tps65010.c1072
-rw-r--r--include/asm-arm/arch-omap/tps65010.h76
4 files changed, 1169 insertions, 2 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 4da7641975fa..028a6feebea5 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -1,5 +1,5 @@
1# 1#
2# I2C Sensor device configuration 2# I2C Sensor and "other" chip configuration
3# 3#
4 4
5menu "Hardware Sensors Chip support" 5menu "Hardware Sensors Chip support"
@@ -472,6 +472,23 @@ config ISP1301_OMAP
472 This driver can also be built as a module. If so, the module 472 This driver can also be built as a module. If so, the module
473 will be called isp1301_omap. 473 will be called isp1301_omap.
474 474
475# NOTE: This isn't really OMAP-specific, except for the current
476# interface location in <include/asm-arm/arch-omap/tps65010.h>
477# and having mostly OMAP-specific board support
478config TPS65010
479 tristate "TPS6501x Power Management chips"
480 depends on I2C && ARCH_OMAP
481 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
482 help
483 If you say yes here you get support for the TPS6501x series of
484 Power Management chips. These include voltage regulators,
485 lithium ion/polymer battery charging, and other features that
486 are often used in portable devices like cell phones and cameras.
487
488 This driver can also be built as a module. If so, the module
489 will be called tps65010.
490
491
475config SENSORS_M41T00 492config SENSORS_M41T00
476 tristate "ST M41T00 RTC chip" 493 tristate "ST M41T00 RTC chip"
477 depends on I2C && PPC32 494 depends on I2C && PPC32
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 2281435fc4c3..5054ba5e470d 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -1,5 +1,5 @@
1# 1#
2# Makefile for the kernel hardware sensors chip drivers. 2# Makefile for sensor and "other" I2C chip drivers.
3# 3#
4 4
5# asb100, then w83781d go first, as they can override other drivers' addresses. 5# asb100, then w83781d go first, as they can override other drivers' addresses.
@@ -43,7 +43,9 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
43obj-$(CONFIG_SENSORS_VIA686A) += via686a.o 43obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
44obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o 44obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
45obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o 45obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
46
46obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o 47obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
48obj-$(CONFIG_TPS65010) += tps65010.o
47 49
48ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) 50ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
49EXTRA_CFLAGS += -DDEBUG 51EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
new file mode 100644
index 000000000000..c0ac01b60039
--- /dev/null
+++ b/drivers/i2c/chips/tps65010.c
@@ -0,0 +1,1072 @@
1/*
2 * tps65010 - driver for tps6501x power management chips
3 *
4 * Copyright (C) 2004 Texas Instruments
5 * Copyright (C) 2004-2005 David Brownell
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 */
21#undef DEBUG
22
23#include <linux/config.h>
24#include <linux/kernel.h>
25#include <linux/module.h>
26#include <linux/init.h>
27#include <linux/slab.h>
28#include <linux/interrupt.h>
29#include <linux/device.h>
30#include <linux/i2c.h>
31#include <linux/delay.h>
32#include <linux/workqueue.h>
33#include <linux/suspend.h>
34#include <linux/debugfs.h>
35#include <linux/seq_file.h>
36
37#include <asm/irq.h>
38#include <asm/mach-types.h>
39
40#include <asm/arch/gpio.h>
41#include <asm/arch/mux.h>
42#include <asm/arch/tps65010.h>
43
44/*-------------------------------------------------------------------------*/
45
46#define DRIVER_VERSION "2 May 2005"
47#define DRIVER_NAME (tps65010_driver.name)
48
49MODULE_DESCRIPTION("TPS6501x Power Management Driver");
50MODULE_LICENSE("GPL");
51
52/* only two addresses possible */
53#define TPS_BASE 0x48
54static unsigned short normal_i2c[] = {
55 TPS_BASE,
56 I2C_CLIENT_END };
57static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
58
59I2C_CLIENT_INSMOD;
60
61static struct i2c_driver tps65010_driver;
62
63/*-------------------------------------------------------------------------*/
64
65/* This driver handles a family of multipurpose chips, which incorporate
66 * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
67 * and other features often needed in portable devices like cell phones
68 * or digital cameras.
69 *
70 * The tps65011 and tps65013 have different voltage settings compared
71 * to tps65010 and tps65012. The tps65013 has a NO_CHG status/irq.
72 * All except tps65010 have "wait" mode, possibly defaulted so that
73 * battery-insert != device-on.
74 *
75 * We could distinguish between some models by checking VDCDC1.UVLO or
76 * other registers, unless they've been changed already after powerup
77 * as part of board setup by a bootloader.
78 */
79enum tps_model {
80 TPS_UNKNOWN = 0,
81 TPS65010,
82 TPS65011,
83 TPS65012,
84 TPS65013,
85};
86
87struct tps65010 {
88 struct i2c_client client;
89 struct semaphore lock;
90 int irq;
91 struct work_struct work;
92 struct dentry *file;
93 unsigned charging:1;
94 unsigned por:1;
95 unsigned model:8;
96 u16 vbus;
97 unsigned long flags;
98#define FLAG_VBUS_CHANGED 0
99#define FLAG_IRQ_ENABLE 1
100
101 /* copies of last register state */
102 u8 chgstatus, regstatus, chgconf;
103 u8 nmask1, nmask2;
104
105 /* plus four GPIOs, probably used to switch power */
106};
107
108#define POWER_POLL_DELAY msecs_to_jiffies(800)
109
110/*-------------------------------------------------------------------------*/
111
112#if defined(DEBUG) || defined(CONFIG_DEBUG_FS)
113
114static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
115{
116 snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
117 chgstatus,
118 (chgstatus & TPS_CHG_USB) ? " USB" : "",
119 (chgstatus & TPS_CHG_AC) ? " AC" : "",
120 (chgstatus & TPS_CHG_THERM) ? " therm" : "",
121 (chgstatus & TPS_CHG_TERM) ? " done" :
122 ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
123 ? " (charging)" : ""),
124 (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
125 (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
126 (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
127 (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
128}
129
130static void dbg_regstat(char *buf, size_t len, u8 regstatus)
131{
132 snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
133 regstatus,
134 (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
135 (regstatus & TPS_REG_COVER) ? " uncover" : "",
136 (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
137 (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
138 (regstatus & TPS_REG_PG_LD02) ? " ld01_bad" : "",
139 (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
140 (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
141 (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
142}
143
144static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
145{
146 char *hibit;
147
148 if (por)
149 hibit = (chgconfig & TPS_CHARGE_POR)
150 ? "POR=69ms" : "POR=1sec";
151 else
152 hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
153
154 snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
155 chgconfig, hibit,
156 (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
157 (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
158 ({int p; switch ((chgconfig >> 3) & 3) {
159 case 3: p = 100; break;
160 case 2: p = 75; break;
161 case 1: p = 50; break;
162 default: p = 25; break;
163 }; p; }),
164 (chgconfig & TPS_VBUS_CHARGING)
165 ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
166 : 0,
167 (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
168}
169
170#endif
171
172#ifdef DEBUG
173
174static void show_chgstatus(const char *label, u8 chgstatus)
175{
176 char buf [100];
177
178 dbg_chgstat(buf, sizeof buf, chgstatus);
179 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
180}
181
182static void show_regstatus(const char *label, u8 regstatus)
183{
184 char buf [100];
185
186 dbg_regstat(buf, sizeof buf, regstatus);
187 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
188}
189
190static void show_chgconfig(int por, const char *label, u8 chgconfig)
191{
192 char buf [100];
193
194 dbg_chgconf(por, buf, sizeof buf, chgconfig);
195 pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
196}
197
198#else
199
200static inline void show_chgstatus(const char *label, u8 chgstatus) { }
201static inline void show_regstatus(const char *label, u8 chgstatus) { }
202static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
203
204#endif
205
206#ifdef CONFIG_DEBUG_FS
207
208static int dbg_show(struct seq_file *s, void *_)
209{
210 struct tps65010 *tps = s->private;
211 u8 value, v2;
212 unsigned i;
213 char buf[100];
214 const char *chip;
215
216 switch (tps->model) {
217 case TPS65010: chip = "tps65010"; break;
218 case TPS65011: chip = "tps65011"; break;
219 case TPS65012: chip = "tps65012"; break;
220 case TPS65013: chip = "tps65013"; break;
221 default: chip = NULL; break;
222 }
223 seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
224 DRIVER_NAME, DRIVER_VERSION, chip);
225
226 down(&tps->lock);
227
228 /* FIXME how can we tell whether a battery is present?
229 * likely involves a charge gauging chip (like BQ26501).
230 */
231
232 seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
233
234
235 /* registers for monitoring battery charging and status; note
236 * that reading chgstat and regstat may ack IRQs...
237 */
238 value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
239 dbg_chgconf(tps->por, buf, sizeof buf, value);
240 seq_printf(s, "chgconfig %s", buf);
241
242 value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
243 dbg_chgstat(buf, sizeof buf, value);
244 seq_printf(s, "chgstat %s", buf);
245 value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK1);
246 dbg_chgstat(buf, sizeof buf, value);
247 seq_printf(s, "mask1 %s", buf);
248 /* ignore ackint1 */
249
250 value = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
251 dbg_regstat(buf, sizeof buf, value);
252 seq_printf(s, "regstat %s", buf);
253 value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK2);
254 dbg_regstat(buf, sizeof buf, value);
255 seq_printf(s, "mask2 %s\n", buf);
256 /* ignore ackint2 */
257
258 (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
259
260
261 /* VMAIN voltage, enable lowpower, etc */
262 value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1);
263 seq_printf(s, "vdcdc1 %02x\n", value);
264
265 /* VCORE voltage, vibrator on/off */
266 value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2);
267 seq_printf(s, "vdcdc2 %02x\n", value);
268
269 /* both LD0s, and their lowpower behavior */
270 value = i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1);
271 seq_printf(s, "vregs1 %02x\n\n", value);
272
273
274 /* LEDs and GPIOs */
275 value = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_ON);
276 v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_PER);
277 seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
278 (value & 0x80)
279 ? ((v2 & 0x80) ? "on" : "off")
280 : ((v2 & 0x80) ? "blink" : "(nPG)"),
281 value, v2,
282 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
283
284 value = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_ON);
285 v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_PER);
286 seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
287 (value & 0x80)
288 ? ((v2 & 0x80) ? "on" : "off")
289 : ((v2 & 0x80) ? "blink" : "off"),
290 value, v2,
291 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
292
293 value = i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO);
294 v2 = i2c_smbus_read_byte_data(&tps->client, TPS_MASK3);
295 seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
296
297 for (i = 0; i < 4; i++) {
298 if (value & (1 << (4 +i)))
299 seq_printf(s, " gpio%d-out %s\n", i + 1,
300 (value & (1 << i)) ? "low" : "hi ");
301 else
302 seq_printf(s, " gpio%d-in %s %s %s\n", i + 1,
303 (value & (1 << i)) ? "hi " : "low",
304 (v2 & (1 << i)) ? "no-irq" : "irq",
305 (v2 & (1 << (4 + i))) ? "rising" : "falling");
306 }
307
308 up(&tps->lock);
309 return 0;
310}
311
312static int dbg_tps_open(struct inode *inode, struct file *file)
313{
314 return single_open(file, dbg_show, inode->u.generic_ip);
315}
316
317static struct file_operations debug_fops = {
318 .open = dbg_tps_open,
319 .read = seq_read,
320 .llseek = seq_lseek,
321 .release = single_release,
322};
323
324#define DEBUG_FOPS &debug_fops
325
326#else
327#define DEBUG_FOPS NULL
328#endif
329
330/*-------------------------------------------------------------------------*/
331
332/* handle IRQS in a task context, so we can use I2C calls */
333static void tps65010_interrupt(struct tps65010 *tps)
334{
335 u8 tmp = 0, mask, poll;
336
337 /* IRQs won't trigger irqs for certain events, but we can get
338 * others by polling (normally, with external power applied).
339 */
340 poll = 0;
341
342 /* regstatus irqs */
343 if (tps->nmask2) {
344 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
345 mask = tmp ^ tps->regstatus;
346 tps->regstatus = tmp;
347 mask &= tps->nmask2;
348 } else
349 mask = 0;
350 if (mask) {
351 tps->regstatus = tmp;
352 /* may need to shut something down ... */
353
354 /* "off" usually means deep sleep */
355 if (tmp & TPS_REG_ONOFF) {
356 pr_info("%s: power off button\n", DRIVER_NAME);
357#if 0
358 /* REVISIT: this might need its own workqueue
359 * plus tweaks including deadlock avoidance ...
360 */
361 software_suspend();
362#endif
363 poll = 1;
364 }
365 }
366
367 /* chgstatus irqs */
368 if (tps->nmask1) {
369 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
370 mask = tmp ^ tps->chgstatus;
371 tps->chgstatus = tmp;
372 mask &= tps->nmask1;
373 } else
374 mask = 0;
375 if (mask) {
376 unsigned charging = 0;
377
378 show_chgstatus("chg/irq", tmp);
379 if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
380 show_chgconfig(tps->por, "conf", tps->chgconf);
381
382 /* Unless it was turned off or disabled, we charge any
383 * battery whenever there's power available for it
384 * and the charger hasn't been disabled.
385 */
386 if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
387 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
388 && (tps->chgconf & TPS_CHARGE_ENABLE)
389 ) {
390 if (tps->chgstatus & TPS_CHG_USB) {
391 /* VBUS options are readonly until reconnect */
392 if (mask & TPS_CHG_USB)
393 set_bit(FLAG_VBUS_CHANGED, &tps->flags);
394 charging = 1;
395 } else if (tps->chgstatus & TPS_CHG_AC)
396 charging = 1;
397 }
398 if (charging != tps->charging) {
399 tps->charging = charging;
400 pr_info("%s: battery %scharging\n",
401 DRIVER_NAME, charging ? "" :
402 ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
403 ? "NOT " : "dis"));
404 }
405 }
406
407 /* always poll to detect (a) power removal, without tps65013
408 * NO_CHG IRQ; or (b) restart of charging after stop.
409 */
410 if ((tps->model != TPS65013 || !tps->charging)
411 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
412 poll = 1;
413 if (poll)
414 (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
415
416 /* also potentially gpio-in rise or fall */
417}
418
419/* handle IRQs and polling using keventd for now */
420static void tps65010_work(void *_tps)
421{
422 struct tps65010 *tps = _tps;
423
424 down(&tps->lock);
425
426 tps65010_interrupt(tps);
427
428 if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
429 int status;
430 u8 chgconfig, tmp;
431
432 chgconfig = i2c_smbus_read_byte_data(&tps->client,
433 TPS_CHGCONFIG);
434 chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
435 if (tps->vbus == 500)
436 chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
437 else if (tps->vbus >= 100)
438 chgconfig |= TPS_VBUS_CHARGING;
439
440 status = i2c_smbus_write_byte_data(&tps->client,
441 TPS_CHGCONFIG, chgconfig);
442
443 /* vbus update fails unless VBUS is connected! */
444 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
445 tps->chgconf = tmp;
446 show_chgconfig(tps->por, "update vbus", tmp);
447 }
448
449 if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
450 enable_irq(tps->irq);
451
452 up(&tps->lock);
453}
454
455static irqreturn_t tps65010_irq(int irq, void *_tps, struct pt_regs *regs)
456{
457 struct tps65010 *tps = _tps;
458
459 disable_irq_nosync(irq);
460 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
461 (void) schedule_work(&tps->work);
462 return IRQ_HANDLED;
463}
464
465/*-------------------------------------------------------------------------*/
466
467static struct tps65010 *the_tps;
468
469static int __exit tps65010_detach_client(struct i2c_client *client)
470{
471 struct tps65010 *tps;
472
473 tps = container_of(client, struct tps65010, client);
474#ifdef CONFIG_ARM
475 if (machine_is_omap_h2())
476 omap_free_gpio(58);
477 if (machine_is_omap_osk())
478 omap_free_gpio(OMAP_MPUIO(1));
479#endif
480 free_irq(tps->irq, tps);
481 debugfs_remove(tps->file);
482 if (i2c_detach_client(client) == 0)
483 kfree(tps);
484 the_tps = 0;
485 return 0;
486}
487
488static int tps65010_noscan(struct i2c_adapter *bus)
489{
490 /* pure paranoia, in case someone adds another i2c bus
491 * after our init section's gone...
492 */
493 return -ENODEV;
494}
495
496/* no error returns, they'd just make bus scanning stop */
497static int __init
498tps65010_probe(struct i2c_adapter *bus, int address, int kind)
499{
500 struct tps65010 *tps;
501 int status;
502
503 if (the_tps) {
504 dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
505 return 0;
506 }
507
508 tps = kmalloc(sizeof *tps, GFP_KERNEL);
509 if (!tps)
510 return 0;
511
512 memset(tps, 0, sizeof *tps);
513 init_MUTEX(&tps->lock);
514 INIT_WORK(&tps->work, tps65010_work, tps);
515 tps->irq = -1;
516 tps->client.addr = address;
517 i2c_set_clientdata(&tps->client, tps);
518 tps->client.adapter = bus;
519 tps->client.driver = &tps65010_driver;
520 strlcpy(tps->client.name, DRIVER_NAME, I2C_NAME_SIZE);
521
522 status = i2c_attach_client(&tps->client);
523 if (status < 0) {
524 dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
525 DRIVER_NAME, address, status);
526fail1:
527 kfree(tps);
528 return 0;
529 }
530
531#ifdef CONFIG_ARM
532 if (machine_is_omap_h2()) {
533 tps->model = TPS65010;
534 omap_cfg_reg(W4_GPIO58);
535 tps->irq = OMAP_GPIO_IRQ(58);
536 omap_request_gpio(58);
537 omap_set_gpio_direction(58, 1);
538 omap_set_gpio_edge_ctrl(58, OMAP_GPIO_FALLING_EDGE);
539 }
540 if (machine_is_omap_osk()) {
541 tps->model = TPS65010;
542 // omap_cfg_reg(U19_1610_MPUIO1);
543 tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
544 omap_request_gpio(OMAP_MPUIO(1));
545 omap_set_gpio_direction(OMAP_MPUIO(1), 1);
546 omap_set_gpio_edge_ctrl(OMAP_MPUIO(1), OMAP_GPIO_FALLING_EDGE);
547 }
548 if (machine_is_omap_h3()) {
549 tps->model = TPS65013;
550
551 // FIXME set up this board's IRQ ...
552 }
553#else
554#define set_irq_type(num,trigger) do{}while(0)
555#endif
556
557 if (tps->irq > 0) {
558 set_irq_type(tps->irq, IRQT_LOW);
559 status = request_irq(tps->irq, tps65010_irq,
560 SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
561 if (status < 0) {
562 dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
563 tps->irq, status);
564 i2c_detach_client(&tps->client);
565 goto fail1;
566 }
567#ifdef CONFIG_ARM
568 /* annoying race here, ideally we'd have an option
569 * to claim the irq now and enable it later.
570 */
571 disable_irq(tps->irq);
572 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
573#endif
574 } else
575 printk(KERN_WARNING "%s: IRQ not configured!\n",
576 DRIVER_NAME);
577
578
579 switch (tps->model) {
580 case TPS65010:
581 case TPS65012:
582 tps->por = 1;
583 break;
584 case TPS_UNKNOWN:
585 printk(KERN_WARNING "%s: unknown TPS chip\n", DRIVER_NAME);
586 break;
587 /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
588 }
589 tps->chgconf = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
590 show_chgconfig(tps->por, "conf/init", tps->chgconf);
591
592 show_chgstatus("chg/init",
593 i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS));
594 show_regstatus("reg/init",
595 i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS));
596
597 pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
598 i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1),
599 i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2),
600 i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1));
601 pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
602 i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO),
603 i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
604
605 tps65010_driver.attach_adapter = tps65010_noscan;
606 the_tps = tps;
607
608#if defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
609 /* USB hosts can't draw VBUS. OTG devices could, later
610 * when OTG infrastructure enables it. USB peripherals
611 * could be relying on VBUS while booting, though.
612 */
613 tps->vbus = 100;
614#endif
615
616 /* unmask the "interesting" irqs, then poll once to
617 * kickstart monitoring, initialize shadowed status
618 * registers, and maybe disable VBUS draw.
619 */
620 tps->nmask1 = ~0;
621 (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK1, ~tps->nmask1);
622
623 tps->nmask2 = TPS_REG_ONOFF;
624 if (tps->model == TPS65013)
625 tps->nmask2 |= TPS_REG_NO_CHG;
626 (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK2, ~tps->nmask2);
627
628 (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK3, 0x0f
629 | i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
630
631 tps65010_work(tps);
632
633 tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
634 tps, DEBUG_FOPS);
635 return 0;
636}
637
638static int __init tps65010_scan_bus(struct i2c_adapter *bus)
639{
640 if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA))
641 return -EINVAL;
642 return i2c_probe(bus, &addr_data, tps65010_probe);
643}
644
645static struct i2c_driver tps65010_driver = {
646 .owner = THIS_MODULE,
647 .name = "tps65010",
648 .id = 888, /* FIXME assign "official" value */
649 .flags = I2C_DF_NOTIFY,
650 .attach_adapter = tps65010_scan_bus,
651 .detach_client = __exit_p(tps65010_detach_client),
652};
653
654/*-------------------------------------------------------------------------*/
655
656/* Draw from VBUS:
657 * 0 mA -- DON'T DRAW (might supply power instead)
658 * 100 mA -- usb unit load (slowest charge rate)
659 * 500 mA -- usb high power (fast battery charge)
660 */
661int tps65010_set_vbus_draw(unsigned mA)
662{
663 unsigned long flags;
664
665 if (!the_tps)
666 return -ENODEV;
667
668 /* assumes non-SMP */
669 local_irq_save(flags);
670 if (mA >= 500)
671 mA = 500;
672 else if (mA >= 100)
673 mA = 100;
674 else
675 mA = 0;
676 the_tps->vbus = mA;
677 if ((the_tps->chgstatus & TPS_CHG_USB)
678 && test_and_set_bit(
679 FLAG_VBUS_CHANGED, &the_tps->flags)) {
680 /* gadget drivers call this in_irq() */
681 (void) schedule_work(&the_tps->work);
682 }
683 local_irq_restore(flags);
684
685 return 0;
686}
687EXPORT_SYMBOL(tps65010_set_vbus_draw);
688
689/*-------------------------------------------------------------------------*/
690/* tps65010_set_gpio_out_value parameter:
691 * gpio: GPIO1, GPIO2, GPIO3 or GPIO4
692 * value: LOW or HIGH
693 */
694int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
695{
696 int status;
697 unsigned defgpio;
698
699 if (!the_tps)
700 return -ENODEV;
701 if ((gpio < GPIO1) || (gpio > GPIO4))
702 return -EINVAL;
703
704 down(&the_tps->lock);
705
706 defgpio = i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO);
707
708 /* Configure GPIO for output */
709 defgpio |= 1 << (gpio + 3);
710
711 /* Writing 1 forces a logic 0 on that GPIO and vice versa */
712 switch (value) {
713 case LOW:
714 defgpio |= 1 << (gpio - 1); /* set GPIO low by writing 1 */
715 break;
716 /* case HIGH: */
717 default:
718 defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
719 break;
720 }
721
722 status = i2c_smbus_write_byte_data(&the_tps->client,
723 TPS_DEFGPIO, defgpio);
724
725 pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
726 gpio, value ? "high" : "low",
727 i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO));
728
729 up(&the_tps->lock);
730 return status;
731}
732EXPORT_SYMBOL(tps65010_set_gpio_out_value);
733
734/*-------------------------------------------------------------------------*/
735/* tps65010_set_led parameter:
736 * led: LED1 or LED2
737 * mode: ON, OFF or BLINK
738 */
739int tps65010_set_led(unsigned led, unsigned mode)
740{
741 int status;
742 unsigned led_on, led_per, offs;
743
744 if (!the_tps)
745 return -ENODEV;
746
747 if(led == LED1)
748 offs = 0;
749 else {
750 offs = 2;
751 led = LED2;
752 }
753
754 down(&the_tps->lock);
755
756 dev_dbg (&the_tps->client.dev, "led%i_on 0x%02x\n", led,
757 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
758
759 dev_dbg (&the_tps->client.dev, "led%i_per 0x%02x\n", led,
760 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs));
761
762 switch (mode) {
763 case OFF:
764 led_on = 1 << 7;
765 led_per = 0 << 7;
766 break;
767 case ON:
768 led_on = 1 << 7;
769 led_per = 1 << 7;
770 break;
771 case BLINK:
772 led_on = 0x30 | (0 << 7);
773 led_per = 0x08 | (1 << 7);
774 break;
775 default:
776 printk(KERN_ERR "%s: Wrong mode parameter for tps65010_set_led()\n",
777 DRIVER_NAME);
778 up(&the_tps->lock);
779 return -EINVAL;
780 }
781
782 status = i2c_smbus_write_byte_data(&the_tps->client,
783 TPS_LED1_ON + offs, led_on);
784
785 if (status != 0) {
786 printk(KERN_ERR "%s: Failed to write led%i_on register\n",
787 DRIVER_NAME, led);
788 up(&the_tps->lock);
789 return status;
790 }
791
792 dev_dbg (&the_tps->client.dev, "led%i_on 0x%02x\n", led,
793 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
794
795 status = i2c_smbus_write_byte_data(&the_tps->client,
796 TPS_LED1_PER + offs, led_per);
797
798 if (status != 0) {
799 printk(KERN_ERR "%s: Failed to write led%i_per register\n",
800 DRIVER_NAME, led);
801 up(&the_tps->lock);
802 return status;
803 }
804
805 dev_dbg (&the_tps->client.dev, "led%i_per 0x%02x\n", led,
806 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs));
807
808 up(&the_tps->lock);
809
810 return status;
811}
812EXPORT_SYMBOL(tps65010_set_led);
813
814/*-------------------------------------------------------------------------*/
815/* tps65010_set_vib parameter:
816 * value: ON or OFF
817 */
818int tps65010_set_vib(unsigned value)
819{
820 int status;
821 unsigned vdcdc2;
822
823 if (!the_tps)
824 return -ENODEV;
825
826 down(&the_tps->lock);
827
828 vdcdc2 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC2);
829 vdcdc2 &= ~(1 << 1);
830 if (value)
831 vdcdc2 |= (1 << 1);
832 status = i2c_smbus_write_byte_data(&the_tps->client,
833 TPS_VDCDC2, vdcdc2);
834
835 pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
836
837 up(&the_tps->lock);
838 return status;
839}
840EXPORT_SYMBOL(tps65010_set_vib);
841
842/*-------------------------------------------------------------------------*/
843/* tps65010_set_low_pwr parameter:
844 * mode: ON or OFF
845 */
846int tps65010_set_low_pwr(unsigned mode)
847{
848 int status;
849 unsigned vdcdc1;
850
851 if (!the_tps)
852 return -ENODEV;
853
854 down(&the_tps->lock);
855
856 pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
857 mode ? "enable" : "disable",
858 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
859
860 vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
861
862 switch (mode) {
863 case OFF:
864 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
865 break;
866 /* case ON: */
867 default:
868 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
869 break;
870 }
871
872 status = i2c_smbus_write_byte_data(&the_tps->client,
873 TPS_VDCDC1, vdcdc1);
874
875 if (status != 0)
876 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
877 DRIVER_NAME);
878 else
879 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
880 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
881
882 up(&the_tps->lock);
883
884 return status;
885}
886EXPORT_SYMBOL(tps65010_set_low_pwr);
887
888/*-------------------------------------------------------------------------*/
889/* tps65010_config_vregs1 parameter:
890 * value to be written to VREGS1 register
891 * Note: The complete register is written, set all bits you need
892 */
893int tps65010_config_vregs1(unsigned value)
894{
895 int status;
896
897 if (!the_tps)
898 return -ENODEV;
899
900 down(&the_tps->lock);
901
902 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
903 i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
904
905 status = i2c_smbus_write_byte_data(&the_tps->client,
906 TPS_VREGS1, value);
907
908 if (status != 0)
909 printk(KERN_ERR "%s: Failed to write vregs1 register\n",
910 DRIVER_NAME);
911 else
912 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
913 i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
914
915 up(&the_tps->lock);
916
917 return status;
918}
919EXPORT_SYMBOL(tps65010_config_vregs1);
920
921/*-------------------------------------------------------------------------*/
922/* tps65013_set_low_pwr parameter:
923 * mode: ON or OFF
924 */
925
926/* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
927 required if power supply is through a battery */
928
929int tps65013_set_low_pwr(unsigned mode)
930{
931 int status;
932 unsigned vdcdc1, chgconfig;
933
934 if (!the_tps || the_tps->por)
935 return -ENODEV;
936
937 down(&the_tps->lock);
938
939 pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
940 DRIVER_NAME,
941 mode ? "enable" : "disable",
942 i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG),
943 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
944
945 chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
946 vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
947
948 switch (mode) {
949 case OFF:
950 chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
951 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
952 break;
953 /* case ON: */
954 default:
955 chgconfig |= TPS65013_AUA; /* enable AUA bit */
956 vdcdc1 |= TPS_ENABLE_LP; /* enable ENABLE_LP bit */
957 break;
958 }
959
960 status = i2c_smbus_write_byte_data(&the_tps->client,
961 TPS_CHGCONFIG, chgconfig);
962 if (status != 0) {
963 printk(KERN_ERR "%s: Failed to write chconfig register\n",
964 DRIVER_NAME);
965 up(&the_tps->lock);
966 return status;
967 }
968
969 chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
970 the_tps->chgconf = chgconfig;
971 show_chgconfig(0, "chgconf", chgconfig);
972
973 status = i2c_smbus_write_byte_data(&the_tps->client,
974 TPS_VDCDC1, vdcdc1);
975
976 if (status != 0)
977 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
978 DRIVER_NAME);
979 else
980 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
981 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
982
983 up(&the_tps->lock);
984
985 return status;
986}
987EXPORT_SYMBOL(tps65013_set_low_pwr);
988
989/*-------------------------------------------------------------------------*/
990
991static int __init tps_init(void)
992{
993 u32 tries = 3;
994 int status = -ENODEV;
995
996 printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
997
998 /* some boards have startup glitches */
999 while (tries--) {
1000 status = i2c_add_driver(&tps65010_driver);
1001 if (the_tps)
1002 break;
1003 i2c_del_driver(&tps65010_driver);
1004 if (!tries) {
1005 printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
1006 return -ENODEV;
1007 }
1008 pr_debug("%s: re-probe ...\n", DRIVER_NAME);
1009 msleep(10);
1010 }
1011
1012#if defined(CONFIG_ARM)
1013 if (machine_is_omap_osk()) {
1014
1015 // FIXME: More should be placed in the initialization code
1016 // of the submodules (DSP, ethernet, power management,
1017 // board-osk.c). Careful: I2C is initialized "late".
1018
1019 /* Let LED1 (D9) blink */
1020 tps65010_set_led(LED1, BLINK);
1021
1022 /* Disable LED 2 (D2) */
1023 tps65010_set_led(LED2, OFF);
1024
1025 /* Set GPIO 1 HIGH to disable VBUS power supply;
1026 * OHCI driver powers it up/down as needed.
1027 */
1028 tps65010_set_gpio_out_value(GPIO1, HIGH);
1029
1030 /* Set GPIO 2 low to turn on LED D3 */
1031 tps65010_set_gpio_out_value(GPIO2, HIGH);
1032
1033 /* Set GPIO 3 low to take ethernet out of reset */
1034 tps65010_set_gpio_out_value(GPIO3, LOW);
1035
1036 /* gpio4 for VDD_DSP */
1037
1038 /* Enable LOW_PWR */
1039 tps65010_set_low_pwr(ON);
1040
1041 /* Switch VLDO2 to 3.0V for AIC23 */
1042 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE);
1043
1044 } else if (machine_is_omap_h2()) {
1045 /* gpio3 for SD, gpio4 for VDD_DSP */
1046
1047 /* Enable LOW_PWR */
1048 tps65010_set_low_pwr(ON);
1049 } else if (machine_is_omap_h3()) {
1050 /* gpio4 for SD, gpio3 for VDD_DSP */
1051#ifdef CONFIG_PM
1052 /* Enable LOW_PWR */
1053 tps65013_set_low_pwr(ON);
1054#endif
1055 }
1056#endif
1057
1058 return status;
1059}
1060/* NOTE: this MUST be initialized before the other parts of the system
1061 * that rely on it ... but after the i2c bus on which this relies.
1062 * That is, much earlier than on PC-type systems, which don't often use
1063 * I2C as a core system bus.
1064 */
1065subsys_initcall(tps_init);
1066
1067static void __exit tps_exit(void)
1068{
1069 i2c_del_driver(&tps65010_driver);
1070}
1071module_exit(tps_exit);
1072
diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/asm-arm/arch-omap/tps65010.h
index 0f97bb2e8fce..b9aa2b3a3909 100644
--- a/include/asm-arm/arch-omap/tps65010.h
+++ b/include/asm-arm/arch-omap/tps65010.h
@@ -30,6 +30,66 @@
30 30
31/* 31/*
32 * ---------------------------------------------------------------------------- 32 * ----------------------------------------------------------------------------
33 * Registers, all 8 bits
34 * ----------------------------------------------------------------------------
35 */
36
37#define TPS_CHGSTATUS 0x01
38# define TPS_CHG_USB (1 << 7)
39# define TPS_CHG_AC (1 << 6)
40# define TPS_CHG_THERM (1 << 5)
41# define TPS_CHG_TERM (1 << 4)
42# define TPS_CHG_TAPER_TMO (1 << 3)
43# define TPS_CHG_CHG_TMO (1 << 2)
44# define TPS_CHG_PRECHG_TMO (1 << 1)
45# define TPS_CHG_TEMP_ERR (1 << 0)
46#define TPS_REGSTATUS 0x02
47# define TPS_REG_ONOFF (1 << 7)
48# define TPS_REG_COVER (1 << 6)
49# define TPS_REG_UVLO (1 << 5)
50# define TPS_REG_NO_CHG (1 << 4) /* tps65013 */
51# define TPS_REG_PG_LD02 (1 << 3)
52# define TPS_REG_PG_LD01 (1 << 2)
53# define TPS_REG_PG_MAIN (1 << 1)
54# define TPS_REG_PG_CORE (1 << 0)
55#define TPS_MASK1 0x03
56#define TPS_MASK2 0x04
57#define TPS_ACKINT1 0x05
58#define TPS_ACKINT2 0x06
59#define TPS_CHGCONFIG 0x07
60# define TPS_CHARGE_POR (1 << 7) /* 65010/65012 */
61# define TPS65013_AUA (1 << 7) /* 65011/65013 */
62# define TPS_CHARGE_RESET (1 << 6)
63# define TPS_CHARGE_FAST (1 << 5)
64# define TPS_CHARGE_CURRENT (3 << 3)
65# define TPS_VBUS_500MA (1 << 2)
66# define TPS_VBUS_CHARGING (1 << 1)
67# define TPS_CHARGE_ENABLE (1 << 0)
68#define TPS_LED1_ON 0x08
69#define TPS_LED1_PER 0x09
70#define TPS_LED2_ON 0x0a
71#define TPS_LED2_PER 0x0b
72#define TPS_VDCDC1 0x0c
73# define TPS_ENABLE_LP (1 << 3)
74#define TPS_VDCDC2 0x0d
75#define TPS_VREGS1 0x0e
76# define TPS_LDO2_ENABLE (1 << 7)
77# define TPS_LDO2_OFF (1 << 6)
78# define TPS_VLDO2_3_0V (3 << 4)
79# define TPS_VLDO2_2_75V (2 << 4)
80# define TPS_VLDO2_2_5V (1 << 4)
81# define TPS_VLDO2_1_8V (0 << 4)
82# define TPS_LDO1_ENABLE (1 << 3)
83# define TPS_LDO1_OFF (1 << 2)
84# define TPS_VLDO1_3_0V (3 << 0)
85# define TPS_VLDO1_2_75V (2 << 0)
86# define TPS_VLDO1_2_5V (1 << 0)
87# define TPS_VLDO1_ADJ (0 << 0)
88#define TPS_MASK3 0x0f
89#define TPS_DEFGPIO 0x10
90
91/*
92 * ----------------------------------------------------------------------------
33 * Macros used by exported functions 93 * Macros used by exported functions
34 * ---------------------------------------------------------------------------- 94 * ----------------------------------------------------------------------------
35 */ 95 */
@@ -71,10 +131,26 @@ extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value);
71 */ 131 */
72extern int tps65010_set_led(unsigned led, unsigned mode); 132extern int tps65010_set_led(unsigned led, unsigned mode);
73 133
134/* tps65010_set_vib parameter:
135 * value: ON or OFF
136 */
137extern int tps65010_set_vib(unsigned value);
138
74/* tps65010_set_low_pwr parameter: 139/* tps65010_set_low_pwr parameter:
75 * mode: ON or OFF 140 * mode: ON or OFF
76 */ 141 */
77extern int tps65010_set_low_pwr(unsigned mode); 142extern int tps65010_set_low_pwr(unsigned mode);
78 143
144/* tps65010_config_vregs1 parameter:
145 * value to be written to VREGS1 register
146 * Note: The complete register is written, set all bits you need
147 */
148extern int tps65010_config_vregs1(unsigned value);
149
150/* tps65013_set_low_pwr parameter:
151 * mode: ON or OFF
152 */
153extern int tps65013_set_low_pwr(unsigned mode);
154
79#endif /* __ASM_ARCH_TPS65010_H */ 155#endif /* __ASM_ARCH_TPS65010_H */
80 156
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 20:20:41 -0500