[SCSI] mptsas: wide port support

* Wide port support added - using James Bottomley's new SAS wide port API.
(There is a known problem in sas transport layer reported yesterday to
James. The Kobject dev.bus_ids for end devices are not unique across
expanders. I have added a work around in this patch, where I asigning
an unique port identifier for every port within the host - this solves
the problem, but I expect a fix from James in the sas transport).

* Adding target_alloc and target_destroy entry points, and moving code over
from the slave entry points.

* The renaming of some mptscsih_xxx functions declared in mptsas.c,
to mptsas_xxx.

* Target Reset moved from slave_destroy to hotplug work thread
handling (with regard to device removal). Also inhibit IO to end device
while device is being broken down . Talked to James Smart about this
at Linux Expo (with questions of how the fc transport handles this).

* Cleaning up the kzalloc's, and kfree's

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

3 files changed, 709 insertions, 274 deletions

diff --git a/drivers/message/fusion/Makefile b/drivers/message/fusion/Makefile
index 51740b346224..b114236f4395 100644
--- a/drivers/message/fusion/Makefile
+++ b/drivers/message/fusion/Makefile
@@ -33,6 +33,11 @@
 #  For mptfc:
 #CFLAGS_mptfc.o += -DMPT_DEBUG_FC
 
+#  For mptsas:
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS
+#CFLAGS_mptsas.o += -DMPT_DEBUG_SAS_WIDE
+
+
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
 obj-$(CONFIG_FUSION_SPI)        += mptbase.o mptscsih.o mptspi.o
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 4720f9ae86aa..ddef586e09e1 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT       "Copyright (c) 1999-2005 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON        "3.03.10"
-#define MPT_LINUX_PACKAGE_NAME          "@(#)mptlinux-3.03.10"
+#define MPT_LINUX_VERSION_COMMON        "3.04.00"
+#define MPT_LINUX_PACKAGE_NAME          "@(#)mptlinux-3.04.00"
 #define WHAT_MAGIC_STRING               "@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -342,6 +342,7 @@ typedef struct _VirtTarget {
         u8                       negoFlags;     /* bit field, see above */
         u8                       raidVolume;    /* set, if RAID Volume */
         u8                       type;          /* byte 0 of Inquiry data */
+        u8                       deleted;       /* target in process of being removed */
         u32                      num_luns;
         u32                      luns[8];               /* Max LUNs is 256 */
 } VirtTarget;
@@ -633,7 +634,7 @@ typedef struct _MPT_ADAPTER
         int                      sas_index; /* index refrencing */
         MPT_SAS_MGMT             sas_mgmt;
         int                      num_ports;
-        struct work_struct       mptscsih_persistTask;
+        struct work_struct       sas_persist_task;
 
         struct work_struct       fc_setup_reset_work;
         struct list_head         fc_rports;
@@ -642,6 +643,7 @@ typedef struct _MPT_ADAPTER
         struct work_struct       fc_rescan_work;
         char                     fc_rescan_work_q_name[KOBJ_NAME_LEN];
         struct workqueue_struct *fc_rescan_work_q;
+        u8              port_serial_number;
 } MPT_ADAPTER;
 
 /*
@@ -893,6 +895,13 @@ typedef struct _mpt_sge {
 #define DBG_DUMP_REQUEST_FRAME_HDR(mfp)
 #endif
 
+// debug sas wide ports
+#ifdef MPT_DEBUG_SAS_WIDE
+#define dsaswideprintk(x) printk x
+#else
+#define dsaswideprintk(x)
+#endif
+
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index af6ec553ff7c..0877023cc79b 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -50,11 +50,14 @@
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/workqueue.h>
+#include <linux/delay.h>        /* for mdelay */
 
+#include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_sas.h>
+#include <scsi/scsi_dbg.h>
 
 #include "mptbase.h"
 #include "mptscsih.h"
@@ -137,23 +140,37 @@ struct mptsas_devinfo {
         u32     device_info;    /* bitfield detailed info about this device */
 };
 
+/*
+ * Specific details on ports, wide/narrow
+ */
+struct mptsas_portinfo_details{
+        u8      port_id;        /* port number provided to transport */
+        u16     num_phys;       /* number of phys belong to this port */
+        u64     phy_bitmask;    /* TODO, extend support for 255 phys */
+        struct sas_rphy *rphy;  /* transport layer rphy object */
+        struct sas_port *port;  /* transport layer port object */
+        struct scsi_target *starget;
+        struct mptsas_portinfo *port_info;
+};
+
 struct mptsas_phyinfo {
         u8      phy_id;                 /* phy index */
-        u8      port_id;                /* port number this phy is part of */
+        u8      port_id;                /* firmware port identifier */
         u8      negotiated_link_rate;   /* nego'd link rate for this phy */
         u8      hw_link_rate;           /* hardware max/min phys link rate */
         u8      programmed_link_rate;   /* programmed max/min phy link rate */
+        u8      sas_port_add_phy;       /* flag to request sas_port_add_phy*/
         struct mptsas_devinfo identify; /* point to phy device info */
         struct mptsas_devinfo attached; /* point to attached device info */
-        struct sas_phy *phy;
-        struct sas_rphy *rphy;
-        struct scsi_target *starget;
+        struct sas_phy *phy;            /* transport layer phy object */
+        struct mptsas_portinfo *portinfo;
+        struct mptsas_portinfo_details * port_details;
 };
 
 struct mptsas_portinfo {
         struct list_head list;
         u16             handle;         /* unique id to address this */
-        u8              num_phys;       /* number of phys */
+        u16             num_phys;       /* number of phys */
         struct mptsas_phyinfo *phy_info;
 };
 
@@ -169,7 +186,7 @@ struct mptsas_enclosure {
         u8      sep_channel;            /* SEP channel logical channel id */
 };
 
-#ifdef SASDEBUG
+#ifdef MPT_DEBUG_SAS
 static void mptsas_print_phy_data(MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
 {
         printk("---- IO UNIT PAGE 0 ------------\n");
@@ -305,7 +322,7 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
 static inline int
 mptsas_is_end_device(struct mptsas_devinfo * attached)
 {
-        if ((attached->handle) &&
+        if ((attached->sas_address) &&
             (attached->device_info &
             MPI_SAS_DEVICE_INFO_END_DEVICE) &&
             ((attached->device_info &
@@ -319,6 +336,253 @@ mptsas_is_end_device(struct mptsas_devinfo * attached)
                 return 0;
 }
 
+/* no mutex */
+void
+mptsas_port_delete(struct mptsas_portinfo_details * port_details)
+{
+        struct mptsas_portinfo *port_info;
+        struct mptsas_phyinfo *phy_info;
+        u8      i;
+
+        if (!port_details)
+                return;
+
+        port_info = port_details->port_info;
+        phy_info = port_info->phy_info;
+
+        dsaswideprintk((KERN_DEBUG "%s: [%p]: port=%02d num_phys=%02d "
+                "bitmask=0x%016llX\n",
+                __FUNCTION__, port_details, port_details->port_id,
+                port_details->num_phys, port_details->phy_bitmask));
+
+        for (i = 0; i < port_info->num_phys; i++, phy_info++) {
+                if(phy_info->port_details != port_details)
+                        continue;
+                memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+                phy_info->port_details = NULL;
+        }
+        kfree(port_details);
+}
+
+static inline struct sas_rphy *
+mptsas_get_rphy(struct mptsas_phyinfo *phy_info)
+{
+        if (phy_info->port_details)
+                return phy_info->port_details->rphy;
+        else
+                return NULL;
+}
+
+static inline void
+mptsas_set_rphy(struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy)
+{
+        if (phy_info->port_details) {
+                phy_info->port_details->rphy = rphy;
+                dsaswideprintk((KERN_DEBUG "sas_rphy_add: rphy=%p\n", rphy));
+        }
+
+#ifdef MPT_DEBUG_SAS_WIDE
+        if (rphy) {
+                dev_printk(KERN_DEBUG, &rphy->dev, "add:");
+                printk("rphy=%p release=%p\n",
+                        rphy, rphy->dev.release);
+        }
+#endif
+}
+
+static inline struct sas_port *
+mptsas_get_port(struct mptsas_phyinfo *phy_info)
+{
+        if (phy_info->port_details)
+                return phy_info->port_details->port;
+        else
+                return NULL;
+}
+
+static inline void
+mptsas_set_port(struct mptsas_phyinfo *phy_info, struct sas_port *port)
+{
+        if (phy_info->port_details)
+                phy_info->port_details->port = port;
+
+#ifdef MPT_DEBUG_SAS_WIDE
+        if (port) {
+                dev_printk(KERN_DEBUG, &port->dev, "add: ");
+                printk("port=%p release=%p\n",
+                        port, port->dev.release);
+        }
+#endif
+}
+
+static inline struct scsi_target *
+mptsas_get_starget(struct mptsas_phyinfo *phy_info)
+{
+        if (phy_info->port_details)
+                return phy_info->port_details->starget;
+        else
+                return NULL;
+}
+
+static inline void
+mptsas_set_starget(struct mptsas_phyinfo *phy_info, struct scsi_target *
+starget)
+{
+        if (phy_info->port_details)
+                phy_info->port_details->starget = starget;
+}
+
+
+/*
+ * mptsas_setup_wide_ports
+ *
+ * Updates for new and existing narrow/wide port configuration
+ * in the sas_topology
+ */
+void
+mptsas_setup_wide_ports(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
+{
+        struct mptsas_portinfo_details * port_details;
+        struct mptsas_phyinfo *phy_info, *phy_info_cmp;
+        u64     sas_address;
+        int     i, j;
+
+        mutex_lock(&ioc->sas_topology_mutex);
+
+        phy_info = port_info->phy_info;
+        for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
+                if (phy_info->attached.handle)
+                        continue;
+                port_details = phy_info->port_details;
+                if (!port_details)
+                        continue;
+                if (port_details->num_phys < 2)
+                        continue;
+                /*
+                 * Removing a phy from a port, letting the last
+                 * phy be removed by firmware events.
+                 */
+                dsaswideprintk((KERN_DEBUG
+                        "%s: [%p]: port=%d deleting phy = %d\n",
+                        __FUNCTION__, port_details,
+                        port_details->port_id, i));
+                port_details->num_phys--;
+                port_details->phy_bitmask &= ~ (1 << phy_info->phy_id);
+                memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+                sas_port_delete_phy(port_details->port, phy_info->phy);
+                phy_info->port_details = NULL;
+        }
+
+        /*
+         * Populate and refresh the tree
+         */
+        phy_info = port_info->phy_info;
+        for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
+                sas_address = phy_info->attached.sas_address;
+                dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
+                        i, sas_address));
+                if (!sas_address)
+                        continue;
+                port_details = phy_info->port_details;
+                /*
+                 * Forming a port
+                 */
+                if (!port_details) {
+                        port_details = kzalloc(sizeof(*port_details),
+                                GFP_KERNEL);
+                        if (!port_details)
+                                goto out;
+                        port_details->num_phys = 1;
+                        port_details->port_info = port_info;
+                        port_details->port_id = ioc->port_serial_number++;
+                        if (phy_info->phy_id < 64 )
+                                port_details->phy_bitmask |=
+                                    (1 << phy_info->phy_id);
+                        phy_info->sas_port_add_phy=1;
+                        dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t"
+                                "phy_id=%d sas_address=0x%018llX\n",
+                                i, sas_address));
+                        phy_info->port_details = port_details;
+                }
+
+                if (i == port_info->num_phys - 1)
+                        continue;
+                phy_info_cmp = &port_info->phy_info[i + 1];
+                for (j = i + 1 ; j < port_info->num_phys ; j++,
+                    phy_info_cmp++) {
+                        if (!phy_info_cmp->attached.sas_address)
+                                continue;
+                        if (sas_address != phy_info_cmp->attached.sas_address)
+                                continue;
+                        if (phy_info_cmp->port_details == port_details )
+                                continue;
+                        dsaswideprintk((KERN_DEBUG
+                                "\t\tphy_id=%d sas_address=0x%018llX\n",
+                                j, phy_info_cmp->attached.sas_address));
+                        if (phy_info_cmp->port_details) {
+                                port_details->rphy =
+                                    mptsas_get_rphy(phy_info_cmp);
+                                port_details->port =
+                                    mptsas_get_port(phy_info_cmp);
+                                port_details->starget =
+                                    mptsas_get_starget(phy_info_cmp);
+                                port_details->port_id =
+                                        phy_info_cmp->port_details->port_id;
+                                port_details->num_phys =
+                                        phy_info_cmp->port_details->num_phys;
+//                              port_info->port_serial_number--;
+                                ioc->port_serial_number--;
+                                if (!phy_info_cmp->port_details->num_phys)
+                                        kfree(phy_info_cmp->port_details);
+                        } else
+                                phy_info_cmp->sas_port_add_phy=1;
+                        /*
+                         * Adding a phy to a port
+                         */
+                        phy_info_cmp->port_details = port_details;
+                        if (phy_info_cmp->phy_id < 64 )
+                                port_details->phy_bitmask |=
+                                (1 << phy_info_cmp->phy_id);
+                        port_details->num_phys++;
+                }
+        }
+
+ out:
+
+#ifdef MPT_DEBUG_SAS_WIDE
+        for (i = 0; i < port_info->num_phys; i++) {
+                port_details = port_info->phy_info[i].port_details;
+                if (!port_details)
+                        continue;
+                dsaswideprintk((KERN_DEBUG
+                        "%s: [%p]: phy_id=%02d port_id=%02d num_phys=%02d "
+                        "bitmask=0x%016llX\n",
+                        __FUNCTION__,
+                        port_details, i, port_details->port_id,
+                        port_details->num_phys, port_details->phy_bitmask));
+                dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n",
+                        port_details->port, port_details->rphy));
+        }
+        dsaswideprintk((KERN_DEBUG"\n"));
+#endif
+        mutex_unlock(&ioc->sas_topology_mutex);
+}
+
+static void
+mptsas_target_reset(MPT_ADAPTER *ioc, VirtTarget * vtarget)
+{
+        MPT_SCSI_HOST           *hd = (MPT_SCSI_HOST *)ioc->sh->hostdata;
+
+        if (mptscsih_TMHandler(hd,
+             MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+             vtarget->bus_id, vtarget->target_id, 0, 0, 5) < 0) {
+                hd->tmPending = 0;
+                hd->tmState = TM_STATE_NONE;
+                printk(MYIOC_s_WARN_FMT
+               "Error processing TaskMgmt id=%d TARGET_RESET\n",
+                        ioc->name, vtarget->target_id);
+        }
+}
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
                 u32 form, u32 form_specific)
@@ -400,11 +664,105 @@ mptsas_slave_configure(struct scsi_device *sdev)
         return mptscsih_slave_configure(sdev);
 }
 
-/*
- * This is pretty ugly.  We will be able to seriously clean it up
- * once the DV code in mptscsih goes away and we can properly
- * implement ->target_alloc.
- */
+static int
+mptsas_target_alloc(struct scsi_target *starget)
+{
+        struct Scsi_Host *host = dev_to_shost(&starget->dev);
+        MPT_SCSI_HOST           *hd = (MPT_SCSI_HOST *)host->hostdata;
+        VirtTarget              *vtarget;
+        u32                     target_id;
+        u32                     channel;
+        struct sas_rphy         *rphy;
+        struct mptsas_portinfo  *p;
+        int                      i;
+
+        vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
+        if (!vtarget)
+                return -ENOMEM;
+
+        vtarget->starget = starget;
+        vtarget->ioc_id = hd->ioc->id;
+        vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
+
+        target_id = starget->id;
+        channel = 0;
+
+        hd->Targets[target_id] = vtarget;
+
+        /*
+         * RAID volumes placed beyond the last expected port.
+         */
+        if (starget->channel == hd->ioc->num_ports)
+                goto out;
+
+        rphy = dev_to_rphy(starget->dev.parent);
+        mutex_lock(&hd->ioc->sas_topology_mutex);
+        list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+                for (i = 0; i < p->num_phys; i++) {
+                        if (p->phy_info[i].attached.sas_address !=
+                                        rphy->identify.sas_address)
+                                continue;
+                        target_id = p->phy_info[i].attached.id;
+                        channel = p->phy_info[i].attached.channel;
+                        mptsas_set_starget(&p->phy_info[i], starget);
+
+                        /*
+                         * Exposing hidden raid components
+                         */
+                        if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
+                                target_id = mptscsih_raid_id_to_num(hd,
+                                                target_id);
+                                vtarget->tflags |=
+                                    MPT_TARGET_FLAGS_RAID_COMPONENT;
+                        }
+                        mutex_unlock(&hd->ioc->sas_topology_mutex);
+                        goto out;
+                }
+        }
+        mutex_unlock(&hd->ioc->sas_topology_mutex);
+
+        kfree(vtarget);
+        return -ENXIO;
+
+ out:
+        vtarget->target_id = target_id;
+        vtarget->bus_id = channel;
+        starget->hostdata = vtarget;
+        return 0;
+}
+
+static void
+mptsas_target_destroy(struct scsi_target *starget)
+{
+        struct Scsi_Host *host = dev_to_shost(&starget->dev);
+        MPT_SCSI_HOST           *hd = (MPT_SCSI_HOST *)host->hostdata;
+        struct sas_rphy         *rphy;
+        struct mptsas_portinfo  *p;
+        int                      i;
+
+        if (!starget->hostdata)
+                return;
+
+        if (starget->channel == hd->ioc->num_ports)
+                goto out;
+
+        rphy = dev_to_rphy(starget->dev.parent);
+        list_for_each_entry(p, &hd->ioc->sas_topology, list) {
+                for (i = 0; i < p->num_phys; i++) {
+                        if (p->phy_info[i].attached.sas_address !=
+                                        rphy->identify.sas_address)
+                                continue;
+                        mptsas_set_starget(&p->phy_info[i], NULL);
+                        goto out;
+                }
+        }
+
+ out:
+        kfree(starget->hostdata);
+        starget->hostdata = NULL;
+}
+
+
 static int
 mptsas_slave_alloc(struct scsi_device *sdev)
 {
@@ -412,61 +770,41 @@ mptsas_slave_alloc(struct scsi_device *sdev)
         MPT_SCSI_HOST           *hd = (MPT_SCSI_HOST *)host->hostdata;
         struct sas_rphy         *rphy;
         struct mptsas_portinfo  *p;
-        VirtTarget              *vtarget;
         VirtDevice              *vdev;
         struct scsi_target      *starget;
-        u32                     target_id;
-        int i;
+        int                     i;
 
         vdev = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
         if (!vdev) {
-                printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
+                printk(MYIOC_s_ERR_FMT "slave_alloc kzalloc(%zd) FAILED!\n",
                                 hd->ioc->name, sizeof(VirtDevice));
                 return -ENOMEM;
         }
-        sdev->hostdata = vdev;
         starget = scsi_target(sdev);
-        vtarget = starget->hostdata;
-        vtarget->ioc_id = hd->ioc->id;
-        vdev->vtarget = vtarget;
-        if (vtarget->num_luns == 0) {
-                vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
-                hd->Targets[sdev->id] = vtarget;
-        }
+        vdev->vtarget = starget->hostdata;
 
         /*
-          RAID volumes placed beyond the last expected port.
-        */
-        if (sdev->channel == hd->ioc->num_ports) {
-                target_id = sdev->id;
-                vtarget->bus_id = 0;
-                vdev->lun = 0;
+         * RAID volumes placed beyond the last expected port.
+         */
+        if (sdev->channel == hd->ioc->num_ports)
                 goto out;
-        }
 
         rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
         mutex_lock(&hd->ioc->sas_topology_mutex);
         list_for_each_entry(p, &hd->ioc->sas_topology, list) {
                 for (i = 0; i < p->num_phys; i++) {
-                        if (p->phy_info[i].attached.sas_address ==
-                                        rphy->identify.sas_address) {
-                                target_id = p->phy_info[i].attached.id;
-                                vtarget->bus_id = p->phy_info[i].attached.channel;
-                                vdev->lun = sdev->lun;
-                                p->phy_info[i].starget = sdev->sdev_target;
-                                /*
-                                 * Exposing hidden disk (RAID)
-                                 */
-                                if (mptscsih_is_phys_disk(hd->ioc, target_id)) {
-                                        target_id = mptscsih_raid_id_to_num(hd,
-                                                        target_id);
-                                        vdev->vtarget->tflags |=
-                                            MPT_TARGET_FLAGS_RAID_COMPONENT;
-                                        sdev->no_uld_attach = 1;
-                                }
-                                mutex_unlock(&hd->ioc->sas_topology_mutex);
-                                goto out;
-                        }
+                        if (p->phy_info[i].attached.sas_address !=
+                                        rphy->identify.sas_address)
+                                continue;
+                        vdev->lun = sdev->lun;
+                        /*
+                         * Exposing hidden raid components
+                         */
+                        if (mptscsih_is_phys_disk(hd->ioc,
+                                        p->phy_info[i].attached.id))
+                                sdev->no_uld_attach = 1;
+                        mutex_unlock(&hd->ioc->sas_topology_mutex);
+                        goto out;
                 }
         }
         mutex_unlock(&hd->ioc->sas_topology_mutex);
@@ -475,57 +813,39 @@ mptsas_slave_alloc(struct scsi_device *sdev)
         return -ENXIO;
 
  out:
-        vtarget->target_id = target_id;
-        vtarget->num_luns++;
+        vdev->vtarget->num_luns++;
+        sdev->hostdata = vdev;
         return 0;
 }
 
-static void
-mptsas_slave_destroy(struct scsi_device *sdev)
+static int
+mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
-        struct Scsi_Host *host = sdev->host;
-        MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
-        VirtDevice *vdev;
+        VirtDevice      *vdev = SCpnt->device->hostdata;
 
-        /*
-         * Issue target reset to flush firmware outstanding commands.
-         */
-        vdev = sdev->hostdata;
-        if (vdev->configured_lun){
-                if (mptscsih_TMHandler(hd,
-                     MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
-                     vdev->vtarget->bus_id,
-                     vdev->vtarget->target_id,
-                     0, 0, 5 /* 5 second timeout */)
-                     < 0){
-
-                        /* The TM request failed!
-                         * Fatal error case.
-                         */
-                        printk(MYIOC_s_WARN_FMT
-                       "Error processing TaskMgmt id=%d TARGET_RESET\n",
-                                hd->ioc->name,
-                                vdev->vtarget->target_id);
-
-                        hd->tmPending = 0;
-                        hd->tmState = TM_STATE_NONE;
-                }
+//      scsi_print_command(SCpnt);
+        if (vdev->vtarget->deleted) {
+                SCpnt->result = DID_NO_CONNECT << 16;
+                done(SCpnt);
+                return 0;
         }
-        mptscsih_slave_destroy(sdev);
+
+        return mptscsih_qcmd(SCpnt,done);
 }
 
+
 static struct scsi_host_template mptsas_driver_template = {
         .module                         = THIS_MODULE,
         .proc_name                      = "mptsas",
         .proc_info                      = mptscsih_proc_info,
         .name                           = "MPT SPI Host",
         .info                           = mptscsih_info,
-        .queuecommand                   = mptscsih_qcmd,
-        .target_alloc                   = mptscsih_target_alloc,
+        .queuecommand                   = mptsas_qcmd,
+        .target_alloc                   = mptsas_target_alloc,
         .slave_alloc                    = mptsas_slave_alloc,
         .slave_configure                = mptsas_slave_configure,
-        .target_destroy                 = mptscsih_target_destroy,
-        .slave_destroy                  = mptsas_slave_destroy,
+        .target_destroy                 = mptsas_target_destroy,
+        .slave_destroy                  = mptscsih_slave_destroy,
         .change_queue_depth             = mptscsih_change_queue_depth,
         .eh_abort_handler               = mptscsih_abort,
         .eh_device_reset_handler        = mptscsih_dev_reset,
@@ -795,7 +1115,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
 
         port_info->num_phys = buffer->NumPhys;
         port_info->phy_info = kcalloc(port_info->num_phys,
-                sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+                sizeof(*port_info->phy_info),GFP_KERNEL);
         if (!port_info->phy_info) {
                 error = -ENOMEM;
                 goto out_free_consistent;
@@ -811,6 +1131,7 @@ mptsas_sas_io_unit_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
                     buffer->PhyData[i].Port;
                 port_info->phy_info[i].negotiated_link_rate =
                     buffer->PhyData[i].NegotiatedLinkRate;
+                port_info->phy_info[i].portinfo = port_info;
         }
 
  out_free_consistent:
@@ -968,7 +1289,7 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
         CONFIGPARMS cfg;
         SasExpanderPage0_t *buffer;
         dma_addr_t dma_handle;
-        int error;
+        int i, error;
 
         hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
         hdr.ExtPageLength = 0;
@@ -1013,12 +1334,15 @@ mptsas_sas_expander_pg0(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info,
         port_info->num_phys = buffer->NumPhys;
         port_info->handle = le16_to_cpu(buffer->DevHandle);
         port_info->phy_info = kcalloc(port_info->num_phys,
-                sizeof(struct mptsas_phyinfo),GFP_KERNEL);
+                sizeof(*port_info->phy_info),GFP_KERNEL);
         if (!port_info->phy_info) {
                 error = -ENOMEM;
                 goto out_free_consistent;
         }
 
+        for (i = 0; i < port_info->num_phys; i++)
+                port_info->phy_info[i].portinfo = port_info;
+
  out_free_consistent:
         pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
                             buffer, dma_handle);
@@ -1161,19 +1485,23 @@ static int mptsas_probe_one_phy(struct device *dev,
 {
         MPT_ADAPTER *ioc;
         struct sas_phy *phy;
-        int error;
+        struct sas_port *port;
+        int error = 0;
 
-        if (!dev)
-                return -ENODEV;
+        if (!dev) {
+                error = -ENODEV;
+                goto out;
+        }
 
         if (!phy_info->phy) {
                 phy = sas_phy_alloc(dev, index);
-                if (!phy)
-                        return -ENOMEM;
+                if (!phy) {
+                        error = -ENOMEM;
+                        goto out;
+                }
         } else
                 phy = phy_info->phy;
 
-        phy->port_identifier = phy_info->port_id;
         mptsas_parse_device_info(&phy->identify, &phy_info->identify);
 
         /*
@@ -1265,19 +1593,50 @@ static int mptsas_probe_one_phy(struct device *dev,
                 error = sas_phy_add(phy);
                 if (error) {
                         sas_phy_free(phy);
-                        return error;
+                        goto out;
                 }
                 phy_info->phy = phy;
         }
 
-        if ((phy_info->attached.handle) &&
-            (!phy_info->rphy)) {
+        if (!phy_info->attached.handle ||
+                        !phy_info->port_details)
+                goto out;
+
+        port = mptsas_get_port(phy_info);
+        ioc = phy_to_ioc(phy_info->phy);
+
+        if (phy_info->sas_port_add_phy) {
+
+                if (!port) {
+                        port = sas_port_alloc(dev,
+                            phy_info->port_details->port_id);
+                        dsaswideprintk((KERN_DEBUG
+                            "sas_port_alloc: port=%p dev=%p port_id=%d\n",
+                            port, dev, phy_info->port_details->port_id));
+                        if (!port) {
+                                error = -ENOMEM;
+                                goto out;
+                        }
+                        error = sas_port_add(port);
+                        if (error) {
+                                dfailprintk((MYIOC_s_ERR_FMT
+                                        "%s: exit at line=%d\n", ioc->name,
+                                        __FUNCTION__, __LINE__));
+                                goto out;
+                        }
+                        mptsas_set_port(phy_info, port);
+                }
+                dsaswideprintk((KERN_DEBUG "sas_port_add_phy: phy_id=%d\n",
+                    phy_info->phy_id));
+                sas_port_add_phy(port, phy_info->phy);
+                phy_info->sas_port_add_phy = 0;
+        }
+
+        if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
 
                 struct sas_rphy *rphy;
                 struct sas_identify identify;
 
-                ioc = phy_to_ioc(phy_info->phy);
-
                 /*
                  * Let the hotplug_work thread handle processing
                  * the adding/removing of devices that occur
@@ -1285,36 +1644,42 @@ static int mptsas_probe_one_phy(struct device *dev,
                  */
                 if (ioc->sas_discovery_runtime &&
                         mptsas_is_end_device(&phy_info->attached))
-                        return 0;
+                                goto out;
 
                 mptsas_parse_device_info(&identify, &phy_info->attached);
                 switch (identify.device_type) {
                 case SAS_END_DEVICE:
-                        rphy = sas_end_device_alloc(phy);
+                        rphy = sas_end_device_alloc(port);
                         break;
                 case SAS_EDGE_EXPANDER_DEVICE:
                 case SAS_FANOUT_EXPANDER_DEVICE:
-                        rphy = sas_expander_alloc(phy, identify.device_type);
+                        rphy = sas_expander_alloc(port, identify.device_type);
                         break;
                 default:
                         rphy = NULL;
                         break;
                 }
-                if (!rphy)
-                        return 0; /* non-fatal: an rphy can be added later */
+                if (!rphy) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
+                        goto out;
+                }
 
                 rphy->identify = identify;
-
                 error = sas_rphy_add(rphy);
                 if (error) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         sas_rphy_free(rphy);
-                        return error;
+                        goto out;
                 }
-
-                phy_info->rphy = rphy;
+                mptsas_set_rphy(phy_info, rphy);
         }
 
-        return 0;
+ out:
+        return error;
 }
 
 static int
@@ -1342,8 +1707,7 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
                 for (i = 0; i < hba->num_phys; i++)
                         port_info->phy_info[i].negotiated_link_rate =
                                 hba->phy_info[i].negotiated_link_rate;
-                if (hba->phy_info)
-                        kfree(hba->phy_info);
+                kfree(hba->phy_info);
                 kfree(hba);
                 hba = NULL;
         }
@@ -1362,24 +1726,24 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc)
                     port_info->phy_info[i].phy_id;
                 handle = port_info->phy_info[i].identify.handle;
 
-                if (port_info->phy_info[i].attached.handle) {
+                if (port_info->phy_info[i].attached.handle)
                         mptsas_sas_device_pg0(ioc,
                                 &port_info->phy_info[i].attached,
                                 (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
                                  MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
                                 port_info->phy_info[i].attached.handle);
-                }
+        }
 
+        mptsas_setup_wide_ports(ioc, port_info);
+
+        for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
                 mptsas_probe_one_phy(&ioc->sh->shost_gendev,
                     &port_info->phy_info[i], ioc->sas_index, 1);
-                ioc->sas_index++;
-        }
 
         return 0;
 
  out_free_port_info:
-        if (hba)
-                kfree(hba);
+        kfree(hba);
  out:
         return error;
 }
@@ -1388,6 +1752,8 @@ static int
 mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
 {
         struct mptsas_portinfo *port_info, *p, *ex;
+        struct device *parent;
+        struct sas_rphy *rphy;
         int error = -ENOMEM, i, j;
 
         ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
@@ -1409,16 +1775,13 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
                 list_add_tail(&port_info->list, &ioc->sas_topology);
         } else {
                 port_info->handle = ex->handle;
-                if (ex->phy_info)
-                        kfree(ex->phy_info);
+                kfree(ex->phy_info);
                 kfree(ex);
                 ex = NULL;
         }
         mutex_unlock(&ioc->sas_topology_mutex);
 
         for (i = 0; i < port_info->num_phys; i++) {
-                struct device *parent;
-
                 mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
                         (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
                          MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
@@ -1442,34 +1805,34 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
                         port_info->phy_info[i].attached.phy_id =
                             port_info->phy_info[i].phy_id;
                 }
+        }
 
-                /*
-                 * If we find a parent port handle this expander is
-                 * attached to another expander, else it hangs of the
-                 * HBA phys.
-                 */
-                parent = &ioc->sh->shost_gendev;
+        parent = &ioc->sh->shost_gendev;
+        for (i = 0; i < port_info->num_phys; i++) {
                 mutex_lock(&ioc->sas_topology_mutex);
                 list_for_each_entry(p, &ioc->sas_topology, list) {
                         for (j = 0; j < p->num_phys; j++) {
-                                if (port_info->phy_info[i].identify.handle ==
+                                if (port_info->phy_info[i].identify.handle !=
                                                 p->phy_info[j].attached.handle)
-                                        parent = &p->phy_info[j].rphy->dev;
+                                        continue;
+                                rphy = mptsas_get_rphy(&p->phy_info[j]);
+                                parent = &rphy->dev;
                         }
                 }
                 mutex_unlock(&ioc->sas_topology_mutex);
+        }
+
+        mptsas_setup_wide_ports(ioc, port_info);
 
+        for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
                 mptsas_probe_one_phy(parent, &port_info->phy_info[i],
                     ioc->sas_index, 0);
-                ioc->sas_index++;
-        }
 
         return 0;
 
  out_free_port_info:
         if (ex) {
-                if (ex->phy_info)
-                        kfree(ex->phy_info);
+                kfree(ex->phy_info);
                 kfree(ex);
         }
  out:
@@ -1488,7 +1851,12 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
 {
         struct mptsas_portinfo buffer;
         struct mptsas_portinfo *port_info, *n, *parent;
+        struct mptsas_phyinfo *phy_info;
+        struct scsi_target * starget;
+        VirtTarget * vtarget;
+        struct sas_port * port;
         int i;
+        u64     expander_sas_address;
 
         mutex_lock(&ioc->sas_topology_mutex);
         list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
@@ -1503,6 +1871,25 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
                      MPI_SAS_EXPAND_PGAD_FORM_SHIFT), port_info->handle)) {
 
                         /*
+                         * Issue target reset to all child end devices
+                         * then mark them deleted to prevent further
+                         * IO going to them.
+                         */
+                        phy_info = port_info->phy_info;
+                        for (i = 0; i < port_info->num_phys; i++, phy_info++) {
+                                starget = mptsas_get_starget(phy_info);
+                                if (!starget)
+                                        continue;
+                                vtarget = starget->hostdata;
+                                if(vtarget->deleted)
+                                        continue;
+                                vtarget->deleted = 1;
+                                mptsas_target_reset(ioc, vtarget);
+                                sas_port_delete(mptsas_get_port(phy_info));
+                                mptsas_port_delete(phy_info->port_details);
+                        }
+
+                        /*
                          * Obtain the port_info instance to the parent port
                          */
                         parent = mptsas_find_portinfo_by_handle(ioc,
@@ -1511,34 +1898,43 @@ mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
                         if (!parent)
                                 goto next_port;
 
+                        expander_sas_address =
+                                port_info->phy_info[0].identify.sas_address;
+
                         /*
                          * Delete rphys in the parent that point
                          * to this expander.  The transport layer will
                          * cleanup all the children.
                          */
-                        for (i = 0; i < parent->num_phys; i++) {
-                                if ((!parent->phy_info[i].rphy) ||
-                                    (parent->phy_info[i].attached.sas_address !=
-                                   port_info->phy_info[i].identify.sas_address))
+                        phy_info = parent->phy_info;
+                        for (i = 0; i < parent->num_phys; i++, phy_info++) {
+                                port = mptsas_get_port(phy_info);
+                                if (!port)
+                                        continue;
+                                if (phy_info->attached.sas_address !=
+                                        expander_sas_address)
                                         continue;
-                                sas_rphy_delete(parent->phy_info[i].rphy);
-                                memset(&parent->phy_info[i].attached, 0,
-                                    sizeof(struct mptsas_devinfo));
-                                parent->phy_info[i].rphy = NULL;
-                                parent->phy_info[i].starget = NULL;
+#ifdef MPT_DEBUG_SAS_WIDE
+                                dev_printk(KERN_DEBUG, &port->dev, "delete\n");
+#endif
+                                sas_port_delete(port);
+                                mptsas_port_delete(phy_info->port_details);
                         }
  next_port:
+
+                        phy_info = port_info->phy_info;
+                        for (i = 0; i < port_info->num_phys; i++, phy_info++)
+                                mptsas_port_delete(phy_info->port_details);
+
                         list_del(&port_info->list);
-                        if (port_info->phy_info)
-                                kfree(port_info->phy_info);
+                        kfree(port_info->phy_info);
                         kfree(port_info);
                 }
                 /*
                 * Free this memory allocated from inside
                 * mptsas_sas_expander_pg0
                 */
-                if (buffer.phy_info)
-                        kfree(buffer.phy_info);
+                kfree(buffer.phy_info);
         }
         mutex_unlock(&ioc->sas_topology_mutex);
 }
@@ -1574,60 +1970,59 @@ mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
 /*
  * Work queue thread to handle Runtime discovery
  * Mere purpose is the hot add/delete of expanders
+ *(Mutex UNLOCKED)
  */
 static void
-mptscsih_discovery_work(void * arg)
+__mptsas_discovery_work(MPT_ADAPTER *ioc)
 {
-        struct mptsas_discovery_event *ev = arg;
-        MPT_ADAPTER *ioc = ev->ioc;
         u32 handle = 0xFFFF;
 
-        mutex_lock(&ioc->sas_discovery_mutex);
         ioc->sas_discovery_runtime=1;
         mptsas_delete_expander_phys(ioc);
         mptsas_probe_hba_phys(ioc);
         while (!mptsas_probe_expander_phys(ioc, &handle))
                 ;
-        kfree(ev);
         ioc->sas_discovery_runtime=0;
+}
+
+/*
+ * Work queue thread to handle Runtime discovery
+ * Mere purpose is the hot add/delete of expanders
+ *(Mutex LOCKED)
+ */
+static void
+mptsas_discovery_work(void * arg)
+{
+        struct mptsas_discovery_event *ev = arg;
+        MPT_ADAPTER *ioc = ev->ioc;
+
+        mutex_lock(&ioc->sas_discovery_mutex);
+        __mptsas_discovery_work(ioc);
         mutex_unlock(&ioc->sas_discovery_mutex);
+        kfree(ev);
 }
 
 static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_parent(MPT_ADAPTER *ioc, u16 parent_handle, u8 phy_id)
+mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
 {
         struct mptsas_portinfo *port_info;
-        struct mptsas_devinfo device_info;
         struct mptsas_phyinfo *phy_info = NULL;
-        int i, error;
-
-        /*
-         * Retrieve the parent sas_address
-         */
-        error = mptsas_sas_device_pg0(ioc, &device_info,
-                (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
-                 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
-                parent_handle);
-        if (error)
-                return NULL;
+        int i;
 
-        /*
-         * The phy_info structures are never deallocated during lifetime of
-         * a host, so the code below is safe without additional refcounting.
-         */
         mutex_lock(&ioc->sas_topology_mutex);
         list_for_each_entry(port_info, &ioc->sas_topology, list) {
                 for (i = 0; i < port_info->num_phys; i++) {
-                        if (port_info->phy_info[i].identify.sas_address ==
-                            device_info.sas_address &&
-                            port_info->phy_info[i].phy_id == phy_id) {
-                                phy_info = &port_info->phy_info[i];
-                                break;
-                        }
+                        if (port_info->phy_info[i].attached.sas_address
+                            != sas_address)
+                                continue;
+                        if (!mptsas_is_end_device(
+                                &port_info->phy_info[i].attached))
+                                continue;
+                        phy_info = &port_info->phy_info[i];
+                        break;
                 }
         }
         mutex_unlock(&ioc->sas_topology_mutex);
-
         return phy_info;
 }
 
@@ -1638,21 +2033,19 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
         struct mptsas_phyinfo *phy_info = NULL;
         int i;
 
-        /*
-         * The phy_info structures are never deallocated during lifetime of
-         * a host, so the code below is safe without additional refcounting.
-         */
         mutex_lock(&ioc->sas_topology_mutex);
         list_for_each_entry(port_info, &ioc->sas_topology, list) {
-                for (i = 0; i < port_info->num_phys; i++)
-                        if (mptsas_is_end_device(&port_info->phy_info[i].attached))
-                                if (port_info->phy_info[i].attached.id == id) {
-                                        phy_info = &port_info->phy_info[i];
-                                        break;
-                                }
+                for (i = 0; i < port_info->num_phys; i++) {
+                        if (port_info->phy_info[i].attached.id != id)
+                                continue;
+                        if (!mptsas_is_end_device(
+                                &port_info->phy_info[i].attached))
+                                continue;
+                        phy_info = &port_info->phy_info[i];
+                        break;
+                }
         }
         mutex_unlock(&ioc->sas_topology_mutex);
-
         return phy_info;
 }
 
@@ -1660,7 +2053,7 @@ mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u32 id)
  * Work queue thread to clear the persitency table
  */
 static void
-mptscsih_sas_persist_clear_table(void * arg)
+mptsas_persist_clear_table(void * arg)
 {
         MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
 
@@ -1681,7 +2074,6 @@ mptsas_reprobe_target(struct scsi_target *starget, int uld_attach)
                         mptsas_reprobe_lun);
 }
 
-
 /*
  * Work queue thread to handle SAS hotplug events
  */
@@ -1692,14 +2084,17 @@ mptsas_hotplug_work(void *arg)
         MPT_ADAPTER *ioc = ev->ioc;
         struct mptsas_phyinfo *phy_info;
         struct sas_rphy *rphy;
+        struct sas_port *port;
         struct scsi_device *sdev;
+        struct scsi_target * starget;
         struct sas_identify identify;
         char *ds = NULL;
         struct mptsas_devinfo sas_device;
         VirtTarget *vtarget;
+        VirtDevice *vdevice;
 
-        mutex_lock(&ioc->sas_discovery_mutex);
 
+        mutex_lock(&ioc->sas_discovery_mutex);
         switch (ev->event_type) {
         case MPTSAS_DEL_DEVICE:
 
@@ -1708,24 +2103,50 @@ mptsas_hotplug_work(void *arg)
                 /*
                  * Sanity checks, for non-existing phys and remote rphys.
                  */
-                if (!phy_info)
+                if (!phy_info || !phy_info->port_details) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         break;
-                if (!phy_info->rphy)
+                }
+                rphy = mptsas_get_rphy(phy_info);
+                if (!rphy) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
+                        break;
+                }
+                port = mptsas_get_port(phy_info);
+                if (!port) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         break;
-                if (phy_info->starget) {
-                        vtarget = phy_info->starget->hostdata;
+                }
+
+                starget = mptsas_get_starget(phy_info);
+                if (starget) {
+                        vtarget = starget->hostdata;
 
-                        if (!vtarget)
+                        if (!vtarget) {
+                                dfailprintk((MYIOC_s_ERR_FMT
+                                        "%s: exit at line=%d\n", ioc->name,
+                                        __FUNCTION__, __LINE__));
                                 break;
+                        }
+
                         /*
                          * Handling  RAID components
                          */
                         if (ev->phys_disk_num_valid) {
                                 vtarget->target_id = ev->phys_disk_num;
                                 vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
-                                mptsas_reprobe_target(vtarget->starget, 1);
+                                mptsas_reprobe_target(starget, 1);
                                 break;
                         }
+
+                        vtarget->deleted = 1;
+                        mptsas_target_reset(ioc, vtarget);
                 }
 
                 if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_TARGET)
@@ -1739,10 +2160,11 @@ mptsas_hotplug_work(void *arg)
                        "removing %s device, channel %d, id %d, phy %d\n",
                        ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
 
-                sas_rphy_delete(phy_info->rphy);
-                memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
-                phy_info->rphy = NULL;
-                phy_info->starget = NULL;
+#ifdef MPT_DEBUG_SAS_WIDE
+                dev_printk(KERN_DEBUG, &port->dev, "delete\n");
+#endif
+                sas_port_delete(port);
+                mptsas_port_delete(phy_info->port_details);
                 break;
         case MPTSAS_ADD_DEVICE:
 
@@ -1754,59 +2176,60 @@ mptsas_hotplug_work(void *arg)
                  */
                 if (mptsas_sas_device_pg0(ioc, &sas_device,
                     (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
-                     MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id))
+                     MPI_SAS_DEVICE_PGAD_FORM_SHIFT), ev->id)) {
+                                dfailprintk((MYIOC_s_ERR_FMT
+                                        "%s: exit at line=%d\n", ioc->name,
+                                        __FUNCTION__, __LINE__));
                         break;
+                }
 
-                phy_info = mptsas_find_phyinfo_by_parent(ioc,
-                                sas_device.handle_parent, sas_device.phy_id);
+                ssleep(2);
+                __mptsas_discovery_work(ioc);
 
-                if (!phy_info) {
-                        u32 handle = 0xFFFF;
+                phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+                                sas_device.sas_address);
 
-                        /*
-                        * Its possible when an expander has been hot added
-                        * containing attached devices, the sas firmware
-                        * may send a RC_ADDED event prior to the
-                        * DISCOVERY STOP event. If that occurs, our
-                        * view of the topology in the driver in respect to this
-                        * expander might of not been setup, and we hit this
-                        * condition.
-                        * Therefore, this code kicks off discovery to
-                        * refresh the data.
-                        * Then again, we check whether the parent phy has
-                        * been created.
-                        */
-                        ioc->sas_discovery_runtime=1;
-                        mptsas_delete_expander_phys(ioc);
-                        mptsas_probe_hba_phys(ioc);
-                        while (!mptsas_probe_expander_phys(ioc, &handle))
-                                ;
-                        ioc->sas_discovery_runtime=0;
-
-                        phy_info = mptsas_find_phyinfo_by_parent(ioc,
-                                sas_device.handle_parent, sas_device.phy_id);
-                        if (!phy_info)
-                                break;
+                if (!phy_info || !phy_info->port_details) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
+                        break;
                 }
 
-                if (phy_info->starget) {
-                        vtarget = phy_info->starget->hostdata;
+                starget = mptsas_get_starget(phy_info);
+                if (starget) {
+                        vtarget = starget->hostdata;
 
-                        if (!vtarget)
+                        if (!vtarget) {
+                                dfailprintk((MYIOC_s_ERR_FMT
+                                        "%s: exit at line=%d\n", ioc->name,
+                                        __FUNCTION__, __LINE__));
                                 break;
+                        }
                         /*
                          * Handling  RAID components
                          */
                         if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
                                 vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
                                 vtarget->target_id = ev->id;
-                                mptsas_reprobe_target(phy_info->starget, 0);
+                                mptsas_reprobe_target(starget, 0);
                         }
                         break;
                 }
 
-                if (phy_info->rphy)
+                if (mptsas_get_rphy(phy_info)) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         break;
+                }
+                port = mptsas_get_port(phy_info);
+                if (!port) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
+                        break;
+                }
 
                 memcpy(&phy_info->attached, &sas_device,
                     sizeof(struct mptsas_devinfo));
@@ -1823,28 +2246,23 @@ mptsas_hotplug_work(void *arg)
                        ioc->name, ds, ev->channel, ev->id, ev->phy_id);
 
                 mptsas_parse_device_info(&identify, &phy_info->attached);
-                switch (identify.device_type) {
-                case SAS_END_DEVICE:
-                        rphy = sas_end_device_alloc(phy_info->phy);
-                        break;
-                case SAS_EDGE_EXPANDER_DEVICE:
-                case SAS_FANOUT_EXPANDER_DEVICE:
-                        rphy = sas_expander_alloc(phy_info->phy, identify.device_type);
-                        break;
-                default:
-                        rphy = NULL;
-                        break;
-                }
-                if (!rphy)
+                rphy = sas_end_device_alloc(port);
+                if (!rphy) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         break; /* non-fatal: an rphy can be added later */
+                }
 
                 rphy->identify = identify;
                 if (sas_rphy_add(rphy)) {
+                        dfailprintk((MYIOC_s_ERR_FMT
+                                "%s: exit at line=%d\n", ioc->name,
+                                __FUNCTION__, __LINE__));
                         sas_rphy_free(rphy);
                         break;
                 }
-
-                phy_info->rphy = rphy;
+                mptsas_set_rphy(phy_info, rphy);
                 break;
         case MPTSAS_ADD_RAID:
                 sdev = scsi_device_lookup(
@@ -1876,6 +2294,9 @@ mptsas_hotplug_work(void *arg)
                 printk(MYIOC_s_INFO_FMT
                        "removing raid volume, channel %d, id %d\n",
                        ioc->name, ioc->num_ports, ev->id);
+                vdevice = sdev->hostdata;
+                vdevice->vtarget->deleted = 1;
+                mptsas_target_reset(ioc, vdevice->vtarget);
                 scsi_remove_device(sdev);
                 scsi_device_put(sdev);
                 mpt_findImVolumes(ioc);
@@ -1885,12 +2306,13 @@ mptsas_hotplug_work(void *arg)
                 break;
         }
 
-        kfree(ev);
         mutex_unlock(&ioc->sas_discovery_mutex);
+        kfree(ev);
+
 }
 
 static void
-mptscsih_send_sas_event(MPT_ADAPTER *ioc,
+mptsas_send_sas_event(MPT_ADAPTER *ioc,
                 EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
 {
         struct mptsas_hotplug_event *ev;
@@ -1906,7 +2328,7 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc,
         switch (sas_event_data->ReasonCode) {
         case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
         case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-                ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+                ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
                 if (!ev) {
                         printk(KERN_WARNING "mptsas: lost hotplug event\n");
                         break;
@@ -1936,10 +2358,9 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc,
         /*
          * Persistent table is full.
          */
-                INIT_WORK(&ioc->mptscsih_persistTask,
-                    mptscsih_sas_persist_clear_table,
-                    (void *)ioc);
-                schedule_work(&ioc->mptscsih_persistTask);
+                INIT_WORK(&ioc->sas_persist_task,
+                    mptsas_persist_clear_table, (void *)ioc);
+                schedule_work(&ioc->sas_persist_task);
                 break;
         case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
         /* TODO */
@@ -1951,7 +2372,7 @@ mptscsih_send_sas_event(MPT_ADAPTER *ioc,
 }
 
 static void
-mptscsih_send_raid_event(MPT_ADAPTER *ioc,
+mptsas_send_raid_event(MPT_ADAPTER *ioc,
                 EVENT_DATA_RAID *raid_event_data)
 {
         struct mptsas_hotplug_event *ev;
@@ -1961,13 +2382,12 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
         if (ioc->bus_type != SAS)
                 return;
 
-        ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+        ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
         if (!ev) {
                 printk(KERN_WARNING "mptsas: lost hotplug event\n");
                 return;
         }
 
-        memset(ev,0,sizeof(struct mptsas_hotplug_event));
         INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
         ev->ioc = ioc;
         ev->id = raid_event_data->VolumeID;
@@ -2029,7 +2449,7 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 }
 
 static void
-mptscsih_send_discovery(MPT_ADAPTER *ioc,
+mptsas_send_discovery_event(MPT_ADAPTER *ioc,
         EVENT_DATA_SAS_DISCOVERY *discovery_data)
 {
         struct mptsas_discovery_event *ev;
@@ -2044,11 +2464,10 @@ mptscsih_send_discovery(MPT_ADAPTER *ioc,
         if (discovery_data->DiscoveryStatus)
                 return;
 
-        ev = kmalloc(sizeof(*ev), GFP_ATOMIC);
+        ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
         if (!ev)
                 return;
-        memset(ev,0,sizeof(struct mptsas_discovery_event));
-        INIT_WORK(&ev->work, mptscsih_discovery_work, ev);
+        INIT_WORK(&ev->work, mptsas_discovery_work, ev);
         ev->ioc = ioc;
         schedule_work(&ev->work);
 };
@@ -2076,21 +2495,21 @@ mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
 
         switch (event) {
         case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
-                mptscsih_send_sas_event(ioc,
+                mptsas_send_sas_event(ioc,
                         (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
                 break;
         case MPI_EVENT_INTEGRATED_RAID:
-                mptscsih_send_raid_event(ioc,
+                mptsas_send_raid_event(ioc,
                         (EVENT_DATA_RAID *)reply->Data);
                 break;
         case MPI_EVENT_PERSISTENT_TABLE_FULL:
-                INIT_WORK(&ioc->mptscsih_persistTask,
-                    mptscsih_sas_persist_clear_table,
+                INIT_WORK(&ioc->sas_persist_task,
+                    mptsas_persist_clear_table,
                     (void *)ioc);
-                schedule_work(&ioc->mptscsih_persistTask);
+                schedule_work(&ioc->sas_persist_task);
                 break;
          case MPI_EVENT_SAS_DISCOVERY:
-                mptscsih_send_discovery(ioc,
+                mptsas_send_discovery_event(ioc,
                         (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
                 break;
         default:
@@ -2309,7 +2728,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
         return 0;
 
-out_mptsas_probe:
+ out_mptsas_probe:
 
         mptscsih_remove(pdev);
         return error;
@@ -2319,6 +2738,7 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
 {
         MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
         struct mptsas_portinfo *p, *n;
+        int i;
 
         ioc->sas_discovery_ignore_events=1;
         sas_remove_host(ioc->sh);
@@ -2326,8 +2746,9 @@ static void __devexit mptsas_remove(struct pci_dev *pdev)
         mutex_lock(&ioc->sas_topology_mutex);
         list_for_each_entry_safe(p, n, &ioc->sas_topology, list) {
                 list_del(&p->list);
-                if (p->phy_info)
-                        kfree(p->phy_info);
+                for (i = 0 ; i < p->num_phys ; i++)
+                        mptsas_port_delete(p->phy_info[i].port_details);
+                kfree(p->phy_info);
                 kfree(p);
         }
         mutex_unlock(&ioc->sas_topology_mutex);