diff options
author | Bruno Randolf <br1@einfach.org> | 2008-07-30 11:12:58 -0400 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-08-22 16:29:50 -0400 |
commit | 63266a653589e1a237527479f10212ea77ce7844 (patch) | |
tree | e2e9318a310d2cc8bec79168c6a3df1f673f27c7 | |
parent | 92ab85354993ac3a364c65cab45745af470ffc67 (diff) |
ath5k: rates cleanup
cleanup the rates structures used by ath5k. instead of separate driver and
mac80211 rate structures we now setup a static ieee80211_rate array and use it
directly. no conversion between two different rate structures has to be done
any more. a lot of unused and confusing junk was deleted.
renamed ath5k_getchannels into ath5k_setup_bands because this is what it does.
rewrote it to copy the bitrates correctly for each band. this is necessary for
running different hardware with the same driver (e.g. 5211 and 5212 based
cards).
add special handling of rates for AR5211 chipsets: it uses different rate codes
for CCK rates (which are actually like the other chips but with a 0xF mask).
setup a hardware code to rate index reverse mapping table for getting the rate
index of received frames.
the rates for control frames which have to be set in
ath5k_hw_write_rate_duration are now in one single array.
drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC
drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/base.h: Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r-- | drivers/net/wireless/ath5k/ath5k.h | 162 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/base.c | 254 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/base.h | 8 | ||||
-rw-r--r-- | drivers/net/wireless/ath5k/hw.c | 76 |
4 files changed, 171 insertions, 329 deletions
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 9102eea3c8bf..c1b497873668 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h | |||
@@ -271,11 +271,6 @@ enum ath5k_driver_mode { | |||
271 | /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ | 271 | /* adding this flag to rate_code enables short preamble, see ar5212_reg.h */ |
272 | #define AR5K_SET_SHORT_PREAMBLE 0x04 | 272 | #define AR5K_SET_SHORT_PREAMBLE 0x04 |
273 | 273 | ||
274 | #define HAS_SHPREAMBLE(_ix) \ | ||
275 | (rt->rates[_ix].modulation == IEEE80211_RATE_SHORT_PREAMBLE) | ||
276 | #define SHPREAMBLE_FLAG(_ix) \ | ||
277 | (HAS_SHPREAMBLE(_ix) ? AR5K_SET_SHORT_PREAMBLE : 0) | ||
278 | |||
279 | 274 | ||
280 | /****************\ | 275 | /****************\ |
281 | TX DEFINITIONS | 276 | TX DEFINITIONS |
@@ -568,152 +563,61 @@ struct ath5k_athchan_2ghz { | |||
568 | u16 a2_athchan; | 563 | u16 a2_athchan; |
569 | }; | 564 | }; |
570 | 565 | ||
566 | |||
571 | /* | 567 | /* |
572 | * Rate definitions | 568 | * Rate definitions |
573 | * TODO: Clean them up or move them on mac80211 -most of these infos are | ||
574 | * used by the rate control algorytm on MadWiFi. | ||
575 | */ | 569 | */ |
576 | 570 | ||
577 | /* Max number of rates on the rate table and what it seems | ||
578 | * Atheros hardware supports */ | ||
579 | #define AR5K_MAX_RATES 32 | ||
580 | |||
581 | /** | 571 | /** |
582 | * struct ath5k_rate - rate structure | 572 | * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32. |
583 | * @valid: is this a valid rate for rate control (remove) | ||
584 | * @modulation: respective mac80211 modulation | ||
585 | * @rate_kbps: rate in kbit/s | ||
586 | * @rate_code: hardware rate value, used in &struct ath5k_desc, on RX on | ||
587 | * &struct ath5k_rx_status.rs_rate and on TX on | ||
588 | * &struct ath5k_tx_status.ts_rate. Seems the ar5xxx harware supports | ||
589 | * up to 32 rates, indexed by 1-32. This means we really only need | ||
590 | * 6 bits for the rate_code. | ||
591 | * @dot11_rate: respective IEEE-802.11 rate value | ||
592 | * @control_rate: index of rate assumed to be used to send control frames. | ||
593 | * This can be used to set override the value on the rate duration | ||
594 | * registers. This is only useful if we can override in the harware at | ||
595 | * what rate we want to send control frames at. Note that IEEE-802.11 | ||
596 | * Ch. 9.6 (after IEEE 802.11g changes) defines the rate at which we | ||
597 | * should send ACK/CTS, if we change this value we can be breaking | ||
598 | * the spec. | ||
599 | * | 573 | * |
600 | * This structure is used to get the RX rate or set the TX rate on the | 574 | * The rate code is used to get the RX rate or set the TX rate on the |
601 | * hardware descriptors. It is also used for internal modulation control | 575 | * hardware descriptors. It is also used for internal modulation control |
602 | * and settings. | 576 | * and settings. |
603 | * | 577 | * |
604 | * On RX after the &struct ath5k_desc is parsed by the appropriate | 578 | * This is the hardware rate map we are aware of: |
605 | * ah_proc_rx_desc() the respective hardware rate value is set in | ||
606 | * &struct ath5k_rx_status.rs_rate. On TX the desired rate is set in | ||
607 | * &struct ath5k_tx_status.ts_rate which is later used to setup the | ||
608 | * &struct ath5k_desc correctly. This is the hardware rate map we are | ||
609 | * aware of: | ||
610 | * | 579 | * |
611 | * rate_code 1 2 3 4 5 6 7 8 | 580 | * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 |
612 | * rate_kbps 3000 1000 ? ? ? 2000 500 48000 | 581 | * rate_kbps 3000 1000 ? ? ? 2000 500 48000 |
613 | * | 582 | * |
614 | * rate_code 9 10 11 12 13 14 15 16 | 583 | * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 |
615 | * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? | 584 | * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ? |
616 | * | 585 | * |
617 | * rate_code 17 18 19 20 21 22 23 24 | 586 | * rate_code 17 18 19 20 21 22 23 24 |
618 | * rate_kbps ? ? ? ? ? ? ? 11000 | 587 | * rate_kbps ? ? ? ? ? ? ? 11000 |
619 | * | 588 | * |
620 | * rate_code 25 26 27 28 29 30 31 32 | 589 | * rate_code 25 26 27 28 29 30 31 32 |
621 | * rate_kbps 5500 2000 1000 ? ? ? ? ? | 590 | * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ? |
622 | * | 591 | * |
592 | * "S" indicates CCK rates with short preamble. | ||
593 | * | ||
594 | * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the | ||
595 | * lowest 4 bits, so they are the same as below with a 0xF mask. | ||
596 | * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M). | ||
597 | * We handle this in ath5k_setup_bands(). | ||
623 | */ | 598 | */ |
624 | struct ath5k_rate { | 599 | #define AR5K_MAX_RATES 32 |
625 | u8 valid; | ||
626 | u32 modulation; | ||
627 | u16 rate_kbps; | ||
628 | u8 rate_code; | ||
629 | u8 dot11_rate; | ||
630 | u8 control_rate; | ||
631 | }; | ||
632 | |||
633 | /* XXX: GRR all this stuff to get leds blinking ??? (check out setcurmode) */ | ||
634 | struct ath5k_rate_table { | ||
635 | u16 rate_count; | ||
636 | u8 rate_code_to_index[AR5K_MAX_RATES]; /* Back-mapping */ | ||
637 | struct ath5k_rate rates[AR5K_MAX_RATES]; | ||
638 | }; | ||
639 | |||
640 | /* | ||
641 | * Rate tables... | ||
642 | * TODO: CLEAN THIS !!! | ||
643 | */ | ||
644 | #define AR5K_RATES_11A { 8, { \ | ||
645 | 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ | ||
646 | 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ | ||
647 | 255, 255, 255, 255, 255, 255, 255, 255 }, { \ | ||
648 | { 1, 0, 6000, 11, 140, 0 }, \ | ||
649 | { 1, 0, 9000, 15, 18, 0 }, \ | ||
650 | { 1, 0, 12000, 10, 152, 2 }, \ | ||
651 | { 1, 0, 18000, 14, 36, 2 }, \ | ||
652 | { 1, 0, 24000, 9, 176, 4 }, \ | ||
653 | { 1, 0, 36000, 13, 72, 4 }, \ | ||
654 | { 1, 0, 48000, 8, 96, 4 }, \ | ||
655 | { 1, 0, 54000, 12, 108, 4 } } \ | ||
656 | } | ||
657 | |||
658 | #define AR5K_RATES_11B { 4, { \ | ||
659 | 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ | ||
660 | 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, \ | ||
661 | 3, 2, 1, 0, 255, 255, 255, 255 }, { \ | ||
662 | { 1, 0, 1000, 27, 130, 0 }, \ | ||
663 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 132, 1 }, \ | ||
664 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 139, 1 }, \ | ||
665 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 150, 1 } } \ | ||
666 | } | ||
667 | |||
668 | #define AR5K_RATES_11G { 12, { \ | ||
669 | 255, 255, 255, 255, 255, 255, 255, 255, 10, 8, 6, 4, \ | ||
670 | 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ | ||
671 | 3, 2, 1, 0, 255, 255, 255, 255 }, { \ | ||
672 | { 1, 0, 1000, 27, 2, 0 }, \ | ||
673 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 2000, 26, 4, 1 }, \ | ||
674 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 5500, 25, 11, 1 }, \ | ||
675 | { 1, IEEE80211_RATE_SHORT_PREAMBLE, 11000, 24, 22, 1 }, \ | ||
676 | { 0, 0, 6000, 11, 12, 4 }, \ | ||
677 | { 0, 0, 9000, 15, 18, 4 }, \ | ||
678 | { 1, 0, 12000, 10, 24, 6 }, \ | ||
679 | { 1, 0, 18000, 14, 36, 6 }, \ | ||
680 | { 1, 0, 24000, 9, 48, 8 }, \ | ||
681 | { 1, 0, 36000, 13, 72, 8 }, \ | ||
682 | { 1, 0, 48000, 8, 96, 8 }, \ | ||
683 | { 1, 0, 54000, 12, 108, 8 } } \ | ||
684 | } | ||
685 | 600 | ||
686 | #define AR5K_RATES_TURBO { 8, { \ | 601 | /* B */ |
687 | 255, 255, 255, 255, 255, 255, 255, 255, 6, 4, 2, 0, \ | 602 | #define ATH5K_RATE_CODE_1M 0x1B |
688 | 7, 5, 3, 1, 255, 255, 255, 255, 255, 255, 255, 255, \ | 603 | #define ATH5K_RATE_CODE_2M 0x1A |
689 | 255, 255, 255, 255, 255, 255, 255, 255 }, { \ | 604 | #define ATH5K_RATE_CODE_5_5M 0x19 |
690 | { 1, MODULATION_TURBO, 6000, 11, 140, 0 }, \ | 605 | #define ATH5K_RATE_CODE_11M 0x18 |
691 | { 1, MODULATION_TURBO, 9000, 15, 18, 0 }, \ | 606 | /* A and G */ |
692 | { 1, MODULATION_TURBO, 12000, 10, 152, 2 }, \ | 607 | #define ATH5K_RATE_CODE_6M 0x0B |
693 | { 1, MODULATION_TURBO, 18000, 14, 36, 2 }, \ | 608 | #define ATH5K_RATE_CODE_9M 0x0F |
694 | { 1, MODULATION_TURBO, 24000, 9, 176, 4 }, \ | 609 | #define ATH5K_RATE_CODE_12M 0x0A |
695 | { 1, MODULATION_TURBO, 36000, 13, 72, 4 }, \ | 610 | #define ATH5K_RATE_CODE_18M 0x0E |
696 | { 1, MODULATION_TURBO, 48000, 8, 96, 4 }, \ | 611 | #define ATH5K_RATE_CODE_24M 0x09 |
697 | { 1, MODULATION_TURBO, 54000, 12, 108, 4 } } \ | 612 | #define ATH5K_RATE_CODE_36M 0x0D |
698 | } | 613 | #define ATH5K_RATE_CODE_48M 0x08 |
614 | #define ATH5K_RATE_CODE_54M 0x0C | ||
615 | /* XR */ | ||
616 | #define ATH5K_RATE_CODE_XR_500K 0x07 | ||
617 | #define ATH5K_RATE_CODE_XR_1M 0x02 | ||
618 | #define ATH5K_RATE_CODE_XR_2M 0x06 | ||
619 | #define ATH5K_RATE_CODE_XR_3M 0x01 | ||
699 | 620 | ||
700 | #define AR5K_RATES_XR { 12, { \ | ||
701 | 255, 3, 1, 255, 255, 255, 2, 0, 10, 8, 6, 4, \ | ||
702 | 11, 9, 7, 5, 255, 255, 255, 255, 255, 255, 255, 255, \ | ||
703 | 255, 255, 255, 255, 255, 255, 255, 255 }, { \ | ||
704 | { 1, MODULATION_XR, 500, 7, 129, 0 }, \ | ||
705 | { 1, MODULATION_XR, 1000, 2, 139, 1 }, \ | ||
706 | { 1, MODULATION_XR, 2000, 6, 150, 2 }, \ | ||
707 | { 1, MODULATION_XR, 3000, 1, 150, 3 }, \ | ||
708 | { 1, 0, 6000, 11, 140, 4 }, \ | ||
709 | { 1, 0, 9000, 15, 18, 4 }, \ | ||
710 | { 1, 0, 12000, 10, 152, 6 }, \ | ||
711 | { 1, 0, 18000, 14, 36, 6 }, \ | ||
712 | { 1, 0, 24000, 9, 176, 8 }, \ | ||
713 | { 1, 0, 36000, 13, 72, 8 }, \ | ||
714 | { 1, 0, 48000, 8, 96, 8 }, \ | ||
715 | { 1, 0, 54000, 12, 108, 8 } } \ | ||
716 | } | ||
717 | 621 | ||
718 | /* | 622 | /* |
719 | * Crypto definitions | 623 | * Crypto definitions |
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index e8564095b2f8..114520258b78 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c | |||
@@ -132,6 +132,48 @@ static struct ath5k_srev_name srev_names[] = { | |||
132 | { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, | 132 | { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN }, |
133 | }; | 133 | }; |
134 | 134 | ||
135 | static struct ieee80211_rate ath5k_rates[] = { | ||
136 | { .bitrate = 10, | ||
137 | .hw_value = ATH5K_RATE_CODE_1M, }, | ||
138 | { .bitrate = 20, | ||
139 | .hw_value = ATH5K_RATE_CODE_2M, | ||
140 | .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE, | ||
141 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | ||
142 | { .bitrate = 55, | ||
143 | .hw_value = ATH5K_RATE_CODE_5_5M, | ||
144 | .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE, | ||
145 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | ||
146 | { .bitrate = 110, | ||
147 | .hw_value = ATH5K_RATE_CODE_11M, | ||
148 | .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE, | ||
149 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | ||
150 | { .bitrate = 60, | ||
151 | .hw_value = ATH5K_RATE_CODE_6M, | ||
152 | .flags = 0 }, | ||
153 | { .bitrate = 90, | ||
154 | .hw_value = ATH5K_RATE_CODE_9M, | ||
155 | .flags = 0 }, | ||
156 | { .bitrate = 120, | ||
157 | .hw_value = ATH5K_RATE_CODE_12M, | ||
158 | .flags = 0 }, | ||
159 | { .bitrate = 180, | ||
160 | .hw_value = ATH5K_RATE_CODE_18M, | ||
161 | .flags = 0 }, | ||
162 | { .bitrate = 240, | ||
163 | .hw_value = ATH5K_RATE_CODE_24M, | ||
164 | .flags = 0 }, | ||
165 | { .bitrate = 360, | ||
166 | .hw_value = ATH5K_RATE_CODE_36M, | ||
167 | .flags = 0 }, | ||
168 | { .bitrate = 480, | ||
169 | .hw_value = ATH5K_RATE_CODE_48M, | ||
170 | .flags = 0 }, | ||
171 | { .bitrate = 540, | ||
172 | .hw_value = ATH5K_RATE_CODE_54M, | ||
173 | .flags = 0 }, | ||
174 | /* XR missing */ | ||
175 | }; | ||
176 | |||
135 | /* | 177 | /* |
136 | * Prototypes - PCI stack related functions | 178 | * Prototypes - PCI stack related functions |
137 | */ | 179 | */ |
@@ -219,20 +261,16 @@ static void ath5k_detach(struct pci_dev *pdev, | |||
219 | struct ieee80211_hw *hw); | 261 | struct ieee80211_hw *hw); |
220 | /* Channel/mode setup */ | 262 | /* Channel/mode setup */ |
221 | static inline short ath5k_ieee2mhz(short chan); | 263 | static inline short ath5k_ieee2mhz(short chan); |
222 | static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates, | ||
223 | const struct ath5k_rate_table *rt, | ||
224 | unsigned int max); | ||
225 | static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, | 264 | static unsigned int ath5k_copy_channels(struct ath5k_hw *ah, |
226 | struct ieee80211_channel *channels, | 265 | struct ieee80211_channel *channels, |
227 | unsigned int mode, | 266 | unsigned int mode, |
228 | unsigned int max); | 267 | unsigned int max); |
229 | static int ath5k_getchannels(struct ieee80211_hw *hw); | 268 | static int ath5k_setup_bands(struct ieee80211_hw *hw); |
230 | static int ath5k_chan_set(struct ath5k_softc *sc, | 269 | static int ath5k_chan_set(struct ath5k_softc *sc, |
231 | struct ieee80211_channel *chan); | 270 | struct ieee80211_channel *chan); |
232 | static void ath5k_setcurmode(struct ath5k_softc *sc, | 271 | static void ath5k_setcurmode(struct ath5k_softc *sc, |
233 | unsigned int mode); | 272 | unsigned int mode); |
234 | static void ath5k_mode_setup(struct ath5k_softc *sc); | 273 | static void ath5k_mode_setup(struct ath5k_softc *sc); |
235 | static void ath5k_set_total_hw_rates(struct ath5k_softc *sc); | ||
236 | 274 | ||
237 | /* Descriptor setup */ | 275 | /* Descriptor setup */ |
238 | static int ath5k_desc_alloc(struct ath5k_softc *sc, | 276 | static int ath5k_desc_alloc(struct ath5k_softc *sc, |
@@ -646,7 +684,6 @@ err_no_irq: | |||
646 | #endif /* CONFIG_PM */ | 684 | #endif /* CONFIG_PM */ |
647 | 685 | ||
648 | 686 | ||
649 | |||
650 | /***********************\ | 687 | /***********************\ |
651 | * Driver Initialization * | 688 | * Driver Initialization * |
652 | \***********************/ | 689 | \***********************/ |
@@ -688,15 +725,12 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw) | |||
688 | * on settings like the phy mode and regulatory | 725 | * on settings like the phy mode and regulatory |
689 | * domain restrictions. | 726 | * domain restrictions. |
690 | */ | 727 | */ |
691 | ret = ath5k_getchannels(hw); | 728 | ret = ath5k_setup_bands(hw); |
692 | if (ret) { | 729 | if (ret) { |
693 | ATH5K_ERR(sc, "can't get channels\n"); | 730 | ATH5K_ERR(sc, "can't get channels\n"); |
694 | goto err; | 731 | goto err; |
695 | } | 732 | } |
696 | 733 | ||
697 | /* Set *_rates so we can map hw rate index */ | ||
698 | ath5k_set_total_hw_rates(sc); | ||
699 | |||
700 | /* NB: setup here so ath5k_rate_update is happy */ | 734 | /* NB: setup here so ath5k_rate_update is happy */ |
701 | if (test_bit(AR5K_MODE_11A, ah->ah_modes)) | 735 | if (test_bit(AR5K_MODE_11A, ah->ah_modes)) |
702 | ath5k_setcurmode(sc, AR5K_MODE_11A); | 736 | ath5k_setcurmode(sc, AR5K_MODE_11A); |
@@ -813,27 +847,6 @@ ath5k_ieee2mhz(short chan) | |||
813 | } | 847 | } |
814 | 848 | ||
815 | static unsigned int | 849 | static unsigned int |
816 | ath5k_copy_rates(struct ieee80211_rate *rates, | ||
817 | const struct ath5k_rate_table *rt, | ||
818 | unsigned int max) | ||
819 | { | ||
820 | unsigned int i, count; | ||
821 | |||
822 | if (rt == NULL) | ||
823 | return 0; | ||
824 | |||
825 | for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) { | ||
826 | rates[count].bitrate = rt->rates[i].rate_kbps / 100; | ||
827 | rates[count].hw_value = rt->rates[i].rate_code; | ||
828 | rates[count].flags = rt->rates[i].modulation; | ||
829 | count++; | ||
830 | max--; | ||
831 | } | ||
832 | |||
833 | return count; | ||
834 | } | ||
835 | |||
836 | static unsigned int | ||
837 | ath5k_copy_channels(struct ath5k_hw *ah, | 850 | ath5k_copy_channels(struct ath5k_hw *ah, |
838 | struct ieee80211_channel *channels, | 851 | struct ieee80211_channel *channels, |
839 | unsigned int mode, | 852 | unsigned int mode, |
@@ -895,74 +908,97 @@ ath5k_copy_channels(struct ath5k_hw *ah, | |||
895 | return count; | 908 | return count; |
896 | } | 909 | } |
897 | 910 | ||
911 | static void | ||
912 | ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b) | ||
913 | { | ||
914 | u8 i; | ||
915 | |||
916 | for (i = 0; i < AR5K_MAX_RATES; i++) | ||
917 | sc->rate_idx[b->band][i] = -1; | ||
918 | |||
919 | for (i = 0; i < b->n_bitrates; i++) { | ||
920 | sc->rate_idx[b->band][b->bitrates[i].hw_value] = i; | ||
921 | if (b->bitrates[i].hw_value_short) | ||
922 | sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i; | ||
923 | } | ||
924 | } | ||
925 | |||
898 | static int | 926 | static int |
899 | ath5k_getchannels(struct ieee80211_hw *hw) | 927 | ath5k_setup_bands(struct ieee80211_hw *hw) |
900 | { | 928 | { |
901 | struct ath5k_softc *sc = hw->priv; | 929 | struct ath5k_softc *sc = hw->priv; |
902 | struct ath5k_hw *ah = sc->ah; | 930 | struct ath5k_hw *ah = sc->ah; |
903 | struct ieee80211_supported_band *sbands = sc->sbands; | 931 | struct ieee80211_supported_band *sband; |
904 | const struct ath5k_rate_table *hw_rates; | 932 | int max_c, count_c = 0; |
905 | unsigned int max_r, max_c, count_r, count_c; | 933 | int i; |
906 | int mode2g = AR5K_MODE_11G; | ||
907 | 934 | ||
908 | BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); | 935 | BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS); |
909 | |||
910 | max_r = ARRAY_SIZE(sc->rates); | ||
911 | max_c = ARRAY_SIZE(sc->channels); | 936 | max_c = ARRAY_SIZE(sc->channels); |
912 | count_r = count_c = 0; | ||
913 | 937 | ||
914 | /* 2GHz band */ | 938 | /* 2GHz band */ |
915 | if (!test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { | 939 | sband = &sc->sbands[IEEE80211_BAND_2GHZ]; |
916 | mode2g = AR5K_MODE_11B; | 940 | sband->band = IEEE80211_BAND_2GHZ; |
917 | if (!test_bit(AR5K_MODE_11B, | 941 | sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0]; |
918 | sc->ah->ah_capabilities.cap_mode)) | ||
919 | mode2g = -1; | ||
920 | } | ||
921 | 942 | ||
922 | if (mode2g > 0) { | 943 | if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) { |
923 | struct ieee80211_supported_band *sband = | 944 | /* G mode */ |
924 | &sbands[IEEE80211_BAND_2GHZ]; | 945 | memcpy(sband->bitrates, &ath5k_rates[0], |
946 | sizeof(struct ieee80211_rate) * 12); | ||
947 | sband->n_bitrates = 12; | ||
925 | 948 | ||
926 | sband->bitrates = sc->rates; | ||
927 | sband->channels = sc->channels; | 949 | sband->channels = sc->channels; |
928 | |||
929 | sband->band = IEEE80211_BAND_2GHZ; | ||
930 | sband->n_channels = ath5k_copy_channels(ah, sband->channels, | 950 | sband->n_channels = ath5k_copy_channels(ah, sband->channels, |
931 | mode2g, max_c); | 951 | AR5K_MODE_11G, max_c); |
932 | |||
933 | hw_rates = ath5k_hw_get_rate_table(ah, mode2g); | ||
934 | sband->n_bitrates = ath5k_copy_rates(sband->bitrates, | ||
935 | hw_rates, max_r); | ||
936 | 952 | ||
953 | hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; | ||
937 | count_c = sband->n_channels; | 954 | count_c = sband->n_channels; |
938 | count_r = sband->n_bitrates; | 955 | max_c -= count_c; |
956 | } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) { | ||
957 | /* B mode */ | ||
958 | memcpy(sband->bitrates, &ath5k_rates[0], | ||
959 | sizeof(struct ieee80211_rate) * 4); | ||
960 | sband->n_bitrates = 4; | ||
961 | |||
962 | /* 5211 only supports B rates and uses 4bit rate codes | ||
963 | * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B) | ||
964 | * fix them up here: | ||
965 | */ | ||
966 | if (ah->ah_version == AR5K_AR5211) { | ||
967 | for (i = 0; i < 4; i++) { | ||
968 | sband->bitrates[i].hw_value = | ||
969 | sband->bitrates[i].hw_value & 0xF; | ||
970 | sband->bitrates[i].hw_value_short = | ||
971 | sband->bitrates[i].hw_value_short & 0xF; | ||
972 | } | ||
973 | } | ||
939 | 974 | ||
940 | hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; | 975 | sband->channels = sc->channels; |
976 | sband->n_channels = ath5k_copy_channels(ah, sband->channels, | ||
977 | AR5K_MODE_11B, max_c); | ||
941 | 978 | ||
942 | max_r -= count_r; | 979 | hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband; |
980 | count_c = sband->n_channels; | ||
943 | max_c -= count_c; | 981 | max_c -= count_c; |
944 | |||
945 | } | 982 | } |
983 | ath5k_setup_rate_idx(sc, sband); | ||
946 | 984 | ||
947 | /* 5GHz band */ | 985 | /* 5GHz band, A mode */ |
948 | |||
949 | if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { | 986 | if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) { |
950 | struct ieee80211_supported_band *sband = | 987 | sband = &sc->sbands[IEEE80211_BAND_5GHZ]; |
951 | &sbands[IEEE80211_BAND_5GHZ]; | 988 | sband->band = IEEE80211_BAND_5GHZ; |
989 | sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0]; | ||
952 | 990 | ||
953 | sband->bitrates = &sc->rates[count_r]; | 991 | memcpy(sband->bitrates, &ath5k_rates[4], |
954 | sband->channels = &sc->channels[count_c]; | 992 | sizeof(struct ieee80211_rate) * 8); |
993 | sband->n_bitrates = 8; | ||
955 | 994 | ||
956 | sband->band = IEEE80211_BAND_5GHZ; | 995 | sband->channels = &sc->channels[count_c]; |
957 | sband->n_channels = ath5k_copy_channels(ah, sband->channels, | 996 | sband->n_channels = ath5k_copy_channels(ah, sband->channels, |
958 | AR5K_MODE_11A, max_c); | 997 | AR5K_MODE_11A, max_c); |
959 | 998 | ||
960 | hw_rates = ath5k_hw_get_rate_table(ah, AR5K_MODE_11A); | ||
961 | sband->n_bitrates = ath5k_copy_rates(sband->bitrates, | ||
962 | hw_rates, max_r); | ||
963 | |||
964 | hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; | 999 | hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband; |
965 | } | 1000 | } |
1001 | ath5k_setup_rate_idx(sc, sband); | ||
966 | 1002 | ||
967 | ath5k_debug_dump_bands(sc); | 1003 | ath5k_debug_dump_bands(sc); |
968 | 1004 | ||
@@ -1031,75 +1067,13 @@ ath5k_mode_setup(struct ath5k_softc *sc) | |||
1031 | ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); | 1067 | ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); |
1032 | } | 1068 | } |
1033 | 1069 | ||
1034 | /* | ||
1035 | * Match the hw provided rate index (through descriptors) | ||
1036 | * to an index for sc->curband->bitrates, so it can be used | ||
1037 | * by the stack. | ||
1038 | * | ||
1039 | * This one is a little bit tricky but i think i'm right | ||
1040 | * about this... | ||
1041 | * | ||
1042 | * We have 4 rate tables in the following order: | ||
1043 | * XR (4 rates) | ||
1044 | * 802.11a (8 rates) | ||
1045 | * 802.11b (4 rates) | ||
1046 | * 802.11g (12 rates) | ||
1047 | * that make the hw rate table. | ||
1048 | * | ||
1049 | * Lets take a 5211 for example that supports a and b modes only. | ||
1050 | * First comes the 802.11a table and then 802.11b (total 12 rates). | ||
1051 | * When hw returns eg. 11 it points to the last 802.11b rate (11Mbit), | ||
1052 | * if it returns 2 it points to the second 802.11a rate etc. | ||
1053 | * | ||
1054 | * Same goes for 5212 who has xr/a/b/g support (total 28 rates). | ||
1055 | * First comes the XR table, then 802.11a, 802.11b and 802.11g. | ||
1056 | * When hw returns eg. 27 it points to the last 802.11g rate (54Mbits) etc | ||
1057 | */ | ||
1058 | static void | ||
1059 | ath5k_set_total_hw_rates(struct ath5k_softc *sc) { | ||
1060 | |||
1061 | struct ath5k_hw *ah = sc->ah; | ||
1062 | |||
1063 | if (test_bit(AR5K_MODE_11A, ah->ah_modes)) | ||
1064 | sc->a_rates = 8; | ||
1065 | |||
1066 | if (test_bit(AR5K_MODE_11B, ah->ah_modes)) | ||
1067 | sc->b_rates = 4; | ||
1068 | |||
1069 | if (test_bit(AR5K_MODE_11G, ah->ah_modes)) | ||
1070 | sc->g_rates = 12; | ||
1071 | |||
1072 | /* XXX: Need to see what what happens when | ||
1073 | xr disable bits in eeprom are set */ | ||
1074 | if (ah->ah_version >= AR5K_AR5212) | ||
1075 | sc->xr_rates = 4; | ||
1076 | |||
1077 | } | ||
1078 | |||
1079 | static inline int | 1070 | static inline int |
1080 | ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) { | 1071 | ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) |
1081 | 1072 | { | |
1082 | int mac80211_rix; | 1073 | WARN_ON(hw_rix < 0 || hw_rix > AR5K_MAX_RATES); |
1083 | 1074 | return sc->rate_idx[sc->curband->band][hw_rix]; | |
1084 | if(sc->curband->band == IEEE80211_BAND_2GHZ) { | ||
1085 | /* We setup a g ratetable for both b/g modes */ | ||
1086 | mac80211_rix = | ||
1087 | hw_rix - sc->b_rates - sc->a_rates - sc->xr_rates; | ||
1088 | } else { | ||
1089 | mac80211_rix = hw_rix - sc->xr_rates; | ||
1090 | } | ||
1091 | |||
1092 | /* Something went wrong, fallback to basic rate for this band */ | ||
1093 | if ((mac80211_rix >= sc->curband->n_bitrates) || | ||
1094 | (mac80211_rix <= 0 )) | ||
1095 | mac80211_rix = 1; | ||
1096 | |||
1097 | return mac80211_rix; | ||
1098 | } | 1075 | } |
1099 | 1076 | ||
1100 | |||
1101 | |||
1102 | |||
1103 | /***************\ | 1077 | /***************\ |
1104 | * Buffers setup * | 1078 | * Buffers setup * |
1105 | \***************/ | 1079 | \***************/ |
@@ -1788,6 +1762,12 @@ accept: | |||
1788 | rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); | 1762 | rxs.rate_idx = ath5k_hw_to_driver_rix(sc, rs.rs_rate); |
1789 | rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); | 1763 | rxs.flag |= ath5k_rx_decrypted(sc, ds, skb, &rs); |
1790 | 1764 | ||
1765 | #if 0 /* add rxs.flag SHORTPRE once it is in mac80211 */ | ||
1766 | if (rs.rs_rate >= ATH5K_RATE_CODE_2M && | ||
1767 | rs.rs_rate <= ATH5K_RATE_CODE_11M && | ||
1768 | rs.rs_rate & AR5K_SET_SHORT_PREAMBLE) | ||
1769 | rxs.flag |= RX_FLAG_SHORTPRE; | ||
1770 | #endif | ||
1791 | ath5k_debug_dump_skb(sc, skb, "RX ", 0); | 1771 | ath5k_debug_dump_skb(sc, skb, "RX ", 0); |
1792 | 1772 | ||
1793 | /* check beacons in IBSS mode */ | 1773 | /* check beacons in IBSS mode */ |
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index d7e03e6b8271..248e32eb6cb3 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h | |||
@@ -111,17 +111,13 @@ struct ath5k_softc { | |||
111 | struct ieee80211_hw *hw; /* IEEE 802.11 common */ | 111 | struct ieee80211_hw *hw; /* IEEE 802.11 common */ |
112 | struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; | 112 | struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; |
113 | struct ieee80211_channel channels[ATH_CHAN_MAX]; | 113 | struct ieee80211_channel channels[ATH_CHAN_MAX]; |
114 | struct ieee80211_rate rates[AR5K_MAX_RATES * IEEE80211_NUM_BANDS]; | 114 | struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; |
115 | u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; | ||
115 | enum ieee80211_if_types opmode; | 116 | enum ieee80211_if_types opmode; |
116 | struct ath5k_hw *ah; /* Atheros HW */ | 117 | struct ath5k_hw *ah; /* Atheros HW */ |
117 | 118 | ||
118 | struct ieee80211_supported_band *curband; | 119 | struct ieee80211_supported_band *curband; |
119 | 120 | ||
120 | u8 a_rates; | ||
121 | u8 b_rates; | ||
122 | u8 g_rates; | ||
123 | u8 xr_rates; | ||
124 | |||
125 | #ifdef CONFIG_ATH5K_DEBUG | 121 | #ifdef CONFIG_ATH5K_DEBUG |
126 | struct ath5k_dbg_info debug; /* debug info */ | 122 | struct ath5k_dbg_info debug; /* debug info */ |
127 | #endif /* CONFIG_ATH5K_DEBUG */ | 123 | #endif /* CONFIG_ATH5K_DEBUG */ |
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index b335d3323057..b987aa1e0f77 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c | |||
@@ -31,13 +31,6 @@ | |||
31 | #include "base.h" | 31 | #include "base.h" |
32 | #include "debug.h" | 32 | #include "debug.h" |
33 | 33 | ||
34 | /* Rate tables */ | ||
35 | static const struct ath5k_rate_table ath5k_rt_11a = AR5K_RATES_11A; | ||
36 | static const struct ath5k_rate_table ath5k_rt_11b = AR5K_RATES_11B; | ||
37 | static const struct ath5k_rate_table ath5k_rt_11g = AR5K_RATES_11G; | ||
38 | static const struct ath5k_rate_table ath5k_rt_turbo = AR5K_RATES_TURBO; | ||
39 | static const struct ath5k_rate_table ath5k_rt_xr = AR5K_RATES_XR; | ||
40 | |||
41 | /* Prototypes */ | 34 | /* Prototypes */ |
42 | static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); | 35 | static int ath5k_hw_nic_reset(struct ath5k_hw *, u32); |
43 | static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); | 36 | static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool); |
@@ -521,34 +514,6 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) | |||
521 | } | 514 | } |
522 | 515 | ||
523 | /* | 516 | /* |
524 | * Get the rate table for a specific operation mode | ||
525 | */ | ||
526 | const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, | ||
527 | unsigned int mode) | ||
528 | { | ||
529 | ATH5K_TRACE(ah->ah_sc); | ||
530 | |||
531 | if (!test_bit(mode, ah->ah_capabilities.cap_mode)) | ||
532 | return NULL; | ||
533 | |||
534 | /* Get rate tables */ | ||
535 | switch (mode) { | ||
536 | case AR5K_MODE_11A: | ||
537 | return &ath5k_rt_11a; | ||
538 | case AR5K_MODE_11A_TURBO: | ||
539 | return &ath5k_rt_turbo; | ||
540 | case AR5K_MODE_11B: | ||
541 | return &ath5k_rt_11b; | ||
542 | case AR5K_MODE_11G: | ||
543 | return &ath5k_rt_11g; | ||
544 | case AR5K_MODE_11G_TURBO: | ||
545 | return &ath5k_rt_xr; | ||
546 | } | ||
547 | |||
548 | return NULL; | ||
549 | } | ||
550 | |||
551 | /* | ||
552 | * Free the ath5k_hw struct | 517 | * Free the ath5k_hw struct |
553 | */ | 518 | */ |
554 | void ath5k_hw_detach(struct ath5k_hw *ah) | 519 | void ath5k_hw_detach(struct ath5k_hw *ah) |
@@ -618,45 +583,42 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, | |||
618 | return 0; | 583 | return 0; |
619 | } | 584 | } |
620 | 585 | ||
586 | |||
587 | /* | ||
588 | * index into rates for control rates, we can set it up like this because | ||
589 | * this is only used for AR5212 and we know it supports G mode | ||
590 | */ | ||
591 | static int control_rates[] = | ||
592 | { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 }; | ||
593 | |||
621 | /** | 594 | /** |
622 | * ath5k_hw_write_rate_duration - set rate duration during hw resets | 595 | * ath5k_hw_write_rate_duration - set rate duration during hw resets |
623 | * | 596 | * |
624 | * @ah: the &struct ath5k_hw | 597 | * @ah: the &struct ath5k_hw |
625 | * @mode: one of enum ath5k_driver_mode | 598 | * @mode: one of enum ath5k_driver_mode |
626 | * | 599 | * |
627 | * Write the rate duration table for the current mode upon hw reset. This | 600 | * Write the rate duration table upon hw reset. This is a helper for |
628 | * is a helper for ath5k_hw_reset(). It seems all this is doing is setting | 601 | * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for |
629 | * an ACK timeout for the hardware for the current mode for each rate. The | 602 | * the hardware for the current mode for each rate. The rates which are capable |
630 | * rates which are capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, | 603 | * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another |
631 | * and 11Mbps) have another register for the short preamble ACK timeout | 604 | * register for the short preamble ACK timeout calculation. |
632 | * calculation. | ||
633 | * | ||
634 | */ | 605 | */ |
635 | static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, | 606 | static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, |
636 | unsigned int mode) | 607 | unsigned int mode) |
637 | { | 608 | { |
638 | struct ath5k_softc *sc = ah->ah_sc; | 609 | struct ath5k_softc *sc = ah->ah_sc; |
639 | const struct ath5k_rate_table *rt; | 610 | struct ieee80211_rate *rate; |
640 | struct ieee80211_rate srate = {}; | ||
641 | unsigned int i; | 611 | unsigned int i; |
642 | 612 | ||
643 | /* Get rate table for the current operating mode */ | ||
644 | rt = ath5k_hw_get_rate_table(ah, mode); | ||
645 | |||
646 | /* Write rate duration table */ | 613 | /* Write rate duration table */ |
647 | for (i = 0; i < rt->rate_count; i++) { | 614 | for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) { |
648 | const struct ath5k_rate *rate, *control_rate; | ||
649 | |||
650 | u32 reg; | 615 | u32 reg; |
651 | u16 tx_time; | 616 | u16 tx_time; |
652 | 617 | ||
653 | rate = &rt->rates[i]; | 618 | rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]]; |
654 | control_rate = &rt->rates[rate->control_rate]; | ||
655 | 619 | ||
656 | /* Set ACK timeout */ | 620 | /* Set ACK timeout */ |
657 | reg = AR5K_RATE_DUR(rate->rate_code); | 621 | reg = AR5K_RATE_DUR(rate->hw_value); |
658 | |||
659 | srate.bitrate = control_rate->rate_kbps/100; | ||
660 | 622 | ||
661 | /* An ACK frame consists of 10 bytes. If you add the FCS, | 623 | /* An ACK frame consists of 10 bytes. If you add the FCS, |
662 | * which ieee80211_generic_frame_duration() adds, | 624 | * which ieee80211_generic_frame_duration() adds, |
@@ -665,11 +627,11 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah, | |||
665 | * ieee80211_duration() for a brief description of | 627 | * ieee80211_duration() for a brief description of |
666 | * what rate we should choose to TX ACKs. */ | 628 | * what rate we should choose to TX ACKs. */ |
667 | tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, | 629 | tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw, |
668 | sc->vif, 10, &srate)); | 630 | sc->vif, 10, rate)); |
669 | 631 | ||
670 | ath5k_hw_reg_write(ah, tx_time, reg); | 632 | ath5k_hw_reg_write(ah, tx_time, reg); |
671 | 633 | ||
672 | if (!HAS_SHPREAMBLE(i)) | 634 | if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)) |
673 | continue; | 635 | continue; |
674 | 636 | ||
675 | /* | 637 | /* |