ext4: remove /proc tuning knobs

Remove tuning knobs in /proc/fs/ext4/<dev/* since they have been
replaced by knobs in sysfs at /sys/fs/ext4/<dev>/*.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

5 files changed, 30 insertions, 177 deletions

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 830bad7cce0f..efc4fd9f40ce 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -940,27 +940,6 @@ Table 1-10: Files in /proc/fs/ext4/<devname>
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
  mb_history      multiblock allocation history
- stats           controls whether the multiblock allocator should start
-                 collecting statistics, which are shown during the unmount
- group_prealloc  the multiblock allocator will round up allocation
-                 requests to a multiple of this tuning parameter if the
-                 stripe size is not set in the ext4 superblock
- max_to_scan     The maximum number of extents the multiblock allocator
-                 will search to find the best extent
- min_to_scan     The minimum number of extents the multiblock allocator
-                 will search to find the best extent
- order2_req      Tuning parameter which controls the minimum size for 
-                 requests (as a power of 2) where the buddy cache is
-                 used
- stream_req      Files which have fewer blocks than this tunable
-                 parameter will have their blocks allocated out of a
-                 block group specific preallocation pool, so that small
-                 files are packed closely together.  Each large file
-                 will have its blocks allocated out of its own unique
-                 preallocation pool.
-inode_readahead  Tuning parameter which controls the maximum number of
-                 inode table blocks that ext4's inode table readahead
-                 algorithm will pre-read into the buffer cache
 ..............................................................................
 
 
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 0bd39188531c..e5c273ff928b 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -976,22 +976,6 @@ void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr,
 
 extern struct proc_dir_entry *ext4_proc_root;
 
-#ifdef CONFIG_PROC_FS
-extern const struct file_operations ext4_ui_proc_fops;
-
-#define EXT4_PROC_HANDLER(name, var)                                    \
-do {                                                                    \
-        proc = proc_create_data(name, mode, sbi->s_proc,                \
-                                &ext4_ui_proc_fops, &sbi->s_##var);     \
-        if (proc == NULL) {                                             \
-                printk(KERN_ERR "EXT4-fs: can't create %s\n", name);    \
-                goto err_out;                                           \
-        }                                                               \
-} while (0)
-#else
-#define EXT4_PROC_HANDLER(name, var)
-#endif
-
 /*
  * Function prototypes
  */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 7dcac9d7e491..d3118d1acc39 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4153,12 +4153,7 @@ make_io:
                         unsigned num;
 
                         table = ext4_inode_table(sb, gdp);
-                        /* Make sure s_inode_readahead_blks is a power of 2 */
-                        while (EXT4_SB(sb)->s_inode_readahead_blks &
-                               (EXT4_SB(sb)->s_inode_readahead_blks-1))
-                                EXT4_SB(sb)->s_inode_readahead_blks = 
-                                   (EXT4_SB(sb)->s_inode_readahead_blks &
-                                    (EXT4_SB(sb)->s_inode_readahead_blks-1));
+                        /* s_inode_readahead_blks is always a power of 2 */
                         b = block & ~(EXT4_SB(sb)->s_inode_readahead_blks-1);
                         if (table > b)
                                 b = table;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index b0d6022eaa67..c4c430977622 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -46,22 +46,23 @@
  * The allocation request involve request for multiple number of blocks
  * near to the goal(block) value specified.
  *
- * During initialization phase of the allocator we decide to use the group
- * preallocation or inode preallocation depending on the size file. The
- * size of the file could be the resulting file size we would have after
- * allocation or the current file size which ever is larger. If the size is
- * less that sbi->s_mb_stream_request we select the group
- * preallocation. The default value of s_mb_stream_request is 16
- * blocks. This can also be tuned via
- * /proc/fs/ext4/<partition>/stream_req. The value is represented in terms
- * of number of blocks.
+ * During initialization phase of the allocator we decide to use the
+ * group preallocation or inode preallocation depending on the size of
+ * the file. The size of the file could be the resulting file size we
+ * would have after allocation, or the current file size, which ever
+ * is larger. If the size is less than sbi->s_mb_stream_request we
+ * select to use the group preallocation. The default value of
+ * s_mb_stream_request is 16 blocks. This can also be tuned via
+ * /sys/fs/ext4/<partition>/mb_stream_req. The value is represented in
+ * terms of number of blocks.
  *
  * The main motivation for having small file use group preallocation is to
- * ensure that we have small file closer in the disk.
+ * ensure that we have small files closer together on the disk.
  *
- * First stage the allocator looks at the inode prealloc list
- * ext4_inode_info->i_prealloc_list contain list of prealloc spaces for
- * this particular inode. The inode prealloc space is represented as:
+ * First stage the allocator looks at the inode prealloc list,
+ * ext4_inode_info->i_prealloc_list, which contains list of prealloc
+ * spaces for this particular inode. The inode prealloc space is
+ * represented as:
  *
  * pa_lstart -> the logical start block for this prealloc space
  * pa_pstart -> the physical start block for this prealloc space
@@ -121,29 +122,29 @@
  * list. In case of inode preallocation we follow a list of heuristics
  * based on file size. This can be found in ext4_mb_normalize_request. If
  * we are doing a group prealloc we try to normalize the request to
- * sbi->s_mb_group_prealloc. Default value of s_mb_group_prealloc is set to
+ * sbi->s_mb_group_prealloc. Default value of s_mb_group_prealloc is
  * 512 blocks. This can be tuned via
- * /proc/fs/ext4/<partition/group_prealloc. The value is represented in
+ * /sys/fs/ext4/<partition/mb_group_prealloc. The value is represented in
  * terms of number of blocks. If we have mounted the file system with -O
  * stripe=<value> option the group prealloc request is normalized to the
  * stripe value (sbi->s_stripe)
  *
- * The regular allocator(using the buddy cache) support few tunables.
+ * The regular allocator(using the buddy cache) supports few tunables.
  *
- * /proc/fs/ext4/<partition>/min_to_scan
- * /proc/fs/ext4/<partition>/max_to_scan
- * /proc/fs/ext4/<partition>/order2_req
+ * /sys/fs/ext4/<partition>/mb_min_to_scan
+ * /sys/fs/ext4/<partition>/mb_max_to_scan
+ * /sys/fs/ext4/<partition>/mb_order2_req
  *
- * The regular allocator use buddy scan only if the request len is power of
+ * The regular allocator uses buddy scan only if the request len is power of
  * 2 blocks and the order of allocation is >= sbi->s_mb_order2_reqs. The
  * value of s_mb_order2_reqs can be tuned via
- * /proc/fs/ext4/<partition>/order2_req.  If the request len is equal to
+ * /sys/fs/ext4/<partition>/mb_order2_req.  If the request len is equal to
  * stripe size (sbi->s_stripe), we try to search for contigous block in
- * stripe size. This should result in better allocation on RAID setup. If
- * not we search in the specific group using bitmap for best extents. The
- * tunable min_to_scan and max_to_scan controll the behaviour here.
+ * stripe size. This should result in better allocation on RAID setups. If
+ * not, we search in the specific group using bitmap for best extents. The
+ * tunable min_to_scan and max_to_scan control the behaviour here.
  * min_to_scan indicate how long the mballoc __must__ look for a best
- * extent and max_to_scanindicate how long the mballoc __can__ look for a
+ * extent and max_to_scan indicates how long the mballoc __can__ look for a
  * best extent in the found extents. Searching for the blocks starts with
  * the group specified as the goal value in allocation context via
  * ac_g_ex. Each group is first checked based on the criteria whether it
@@ -337,8 +338,6 @@ static void ext4_mb_generate_from_pa(struct super_block *sb, void *bitmap,
                                         ext4_group_t group);
 static void ext4_mb_generate_from_freelist(struct super_block *sb, void *bitmap,
                                                 ext4_group_t group);
-static int ext4_mb_init_per_dev_proc(struct super_block *sb);
-static int ext4_mb_destroy_per_dev_proc(struct super_block *sb);
 static void release_blocks_on_commit(journal_t *journal, transaction_t *txn);
 
 
@@ -1978,7 +1977,7 @@ ext4_mb_regular_allocator(struct ext4_allocation_context *ac)
         /*
          * We search using buddy data only if the order of the request
          * is greater than equal to the sbi_s_mb_order2_reqs
-         * You can tune it via /proc/fs/ext4/<partition>/order2_req
+         * You can tune it via /sys/fs/ext4/<partition>/mb_order2_req
          */
         if (i >= sbi->s_mb_order2_reqs) {
                 /*
@@ -2753,7 +2752,6 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery)
                 spin_lock_init(&lg->lg_prealloc_lock);
         }
 
-        ext4_mb_init_per_dev_proc(sb);
         ext4_mb_history_init(sb);
 
         if (sbi->s_journal)
@@ -2836,7 +2834,6 @@ int ext4_mb_release(struct super_block *sb)
 
         free_percpu(sbi->s_locality_groups);
         ext4_mb_history_release(sb);
-        ext4_mb_destroy_per_dev_proc(sb);
 
         return 0;
 }
@@ -2897,62 +2894,6 @@ static void release_blocks_on_commit(journal_t *journal, transaction_t *txn)
         mb_debug("freed %u blocks in %u structures\n", count, count2);
 }
 
-#define EXT4_MB_STATS_NAME              "stats"
-#define EXT4_MB_MAX_TO_SCAN_NAME        "max_to_scan"
-#define EXT4_MB_MIN_TO_SCAN_NAME        "min_to_scan"
-#define EXT4_MB_ORDER2_REQ              "order2_req"
-#define EXT4_MB_STREAM_REQ              "stream_req"
-#define EXT4_MB_GROUP_PREALLOC          "group_prealloc"
-
-static int ext4_mb_init_per_dev_proc(struct super_block *sb)
-{
-#ifdef CONFIG_PROC_FS
-        mode_t mode = S_IFREG | S_IRUGO | S_IWUSR;
-        struct ext4_sb_info *sbi = EXT4_SB(sb);
-        struct proc_dir_entry *proc;
-
-        if (sbi->s_proc == NULL)
-                return -EINVAL;
-
-        EXT4_PROC_HANDLER(EXT4_MB_STATS_NAME, mb_stats);
-        EXT4_PROC_HANDLER(EXT4_MB_MAX_TO_SCAN_NAME, mb_max_to_scan);
-        EXT4_PROC_HANDLER(EXT4_MB_MIN_TO_SCAN_NAME, mb_min_to_scan);
-        EXT4_PROC_HANDLER(EXT4_MB_ORDER2_REQ, mb_order2_reqs);
-        EXT4_PROC_HANDLER(EXT4_MB_STREAM_REQ, mb_stream_request);
-        EXT4_PROC_HANDLER(EXT4_MB_GROUP_PREALLOC, mb_group_prealloc);
-        return 0;
-
-err_out:
-        remove_proc_entry(EXT4_MB_GROUP_PREALLOC, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_STREAM_REQ, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_ORDER2_REQ, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_MIN_TO_SCAN_NAME, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_MAX_TO_SCAN_NAME, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_STATS_NAME, sbi->s_proc);
-        return -ENOMEM;
-#else
-        return 0;
-#endif
-}
-
-static int ext4_mb_destroy_per_dev_proc(struct super_block *sb)
-{
-#ifdef CONFIG_PROC_FS
-        struct ext4_sb_info *sbi = EXT4_SB(sb);
-
-        if (sbi->s_proc == NULL)
-                return -EINVAL;
-
-        remove_proc_entry(EXT4_MB_GROUP_PREALLOC, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_STREAM_REQ, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_ORDER2_REQ, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_MIN_TO_SCAN_NAME, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_MAX_TO_SCAN_NAME, sbi->s_proc);
-        remove_proc_entry(EXT4_MB_STATS_NAME, sbi->s_proc);
-#endif
-        return 0;
-}
-
 int __init init_ext4_mballoc(void)
 {
         ext4_pspace_cachep =
@@ -3123,7 +3064,7 @@ out_err:
  * here we normalize request for locality group
  * Group request are normalized to s_strip size if we set the same via mount
  * option. If not we set it to s_mb_group_prealloc which can be configured via
- * /proc/fs/ext4/<partition>/group_prealloc
+ * /sys/fs/ext4/<partition>/mb_group_prealloc
  *
  * XXX: should we try to preallocate more than the group has now?
  */
@@ -4239,7 +4180,7 @@ static inline void ext4_mb_show_ac(struct ext4_allocation_context *ac)
  * file is determined by the current size or the resulting size after
  * allocation which ever is larger
  *
- * One can tune this size via /proc/fs/ext4/<partition>/stream_req
+ * One can tune this size via /sys/fs/ext4/<partition>/mb_stream_req
  */
 static void ext4_mb_group_or_file(struct ext4_allocation_context *ac)
 {
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 2883d4318c22..1ec554cc107a 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -579,7 +579,6 @@ static void ext4_put_super(struct super_block *sb)
                 ext4_commit_super(sb, es, 1);
         }
         if (sbi->s_proc) {
-                remove_proc_entry("inode_readahead_blks", sbi->s_proc);
                 remove_proc_entry(sb->s_id, ext4_proc_root);
         }
         kobject_del(&sbi->s_kobj);
@@ -2529,11 +2528,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 #ifdef CONFIG_PROC_FS
         if (ext4_proc_root)
                 sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
-
-        if (sbi->s_proc)
-                proc_create_data("inode_readahead_blks", 0644, sbi->s_proc,
-                                 &ext4_ui_proc_fops,
-                                 &sbi->s_inode_readahead_blks);
 #endif
 
         bgl_lock_init(sbi->s_blockgroup_lock);
@@ -2832,7 +2826,6 @@ failed_mount2:
         kfree(sbi->s_group_desc);
 failed_mount:
         if (sbi->s_proc) {
-                remove_proc_entry("inode_readahead_blks", sbi->s_proc);
                 remove_proc_entry(sb->s_id, ext4_proc_root);
         }
 #ifdef CONFIG_QUOTA
@@ -3865,45 +3858,6 @@ static int ext4_get_sb(struct file_system_type *fs_type,
         return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt);
 }
 
-#ifdef CONFIG_PROC_FS
-static int ext4_ui_proc_show(struct seq_file *m, void *v)
-{
-        unsigned int *p = m->private;
-
-        seq_printf(m, "%u\n", *p);
-        return 0;
-}
-
-static int ext4_ui_proc_open(struct inode *inode, struct file *file)
-{
-        return single_open(file, ext4_ui_proc_show, PDE(inode)->data);
-}
-
-static ssize_t ext4_ui_proc_write(struct file *file, const char __user *buf,
-                               size_t cnt, loff_t *ppos)
-{
-        unsigned long *p = PDE(file->f_path.dentry->d_inode)->data;
-        char str[32];
-
-        if (cnt >= sizeof(str))
-                return -EINVAL;
-        if (copy_from_user(str, buf, cnt))
-                return -EFAULT;
-
-        *p = simple_strtoul(str, NULL, 0);
-        return cnt;
-}
-
-const struct file_operations ext4_ui_proc_fops = {
-        .owner          = THIS_MODULE,
-        .open           = ext4_ui_proc_open,
-        .read           = seq_read,
-        .llseek         = seq_lseek,
-        .release        = single_release,
-        .write          = ext4_ui_proc_write,
-};
-#endif
-
 static struct file_system_type ext4_fs_type = {
         .owner          = THIS_MODULE,
         .name           = "ext4",