e1000e: reset the PHY on 82577/82578 when going to Sx

The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx
state in order for the PHY write which disables gigabit speed to take
effect.  Gigabit speed must be disabled in order for the PHY writes to
registers on page 800 (the wakeup control registers) to work as expected
otherwise the system might not wake via WoL.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 1 insertions, 2 deletions

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 99df2abf82a9..aa0ab0eb8c7d 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -2843,9 +2843,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
                             E1000_PHY_CTRL_GBE_DISABLE;
                 ew32(PHY_CTRL, phy_ctrl);
 
-                /* Workaround SWFLAG unexpectedly set during S0->Sx */
                 if (hw->mac.type == e1000_pchlan)
-                        udelay(500);
+                        e1000_phy_hw_reset_ich8lan(hw);
         default:
                 break;
         }