Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

14 files changed, 168 insertions, 44 deletions

diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 1e36f1661cd0..867f4c38f356 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -46,8 +46,9 @@ USB-specific:
 
 -EMSGSIZE       (a) endpoint maxpacket size is zero; it is not usable
                     in the current interface altsetting.
-                (b) ISO packet is biger than endpoint maxpacket
-                (c) requested data transfer size is invalid (negative)
+                (b) ISO packet is larger than the endpoint maxpacket.
+                (c) requested data transfer length is invalid: negative
+                    or too large for the host controller.
 
 -ENOSPC         This request would overcommit the usb bandwidth reserved
                 for periodic transfers (interrupt, isochronous).
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 4be59dbb78c4..1ba072630361 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -193,6 +193,7 @@ static const u8 W83792D_REG_LEVELS[3][4] = {
           0xE2 }        /* (bit3-0) SmartFanII: Fan3 Level 3 */
 };
 
+#define W83792D_REG_GPIO_EN             0x1A
 #define W83792D_REG_CONFIG              0x40
 #define W83792D_REG_VID_FANDIV          0x47
 #define W83792D_REG_CHIPID              0x49
@@ -257,7 +258,7 @@ DIV_TO_REG(long val)
 {
         int i;
         val = SENSORS_LIMIT(val, 1, 128) >> 1;
-        for (i = 0; i < 6; i++) {
+        for (i = 0; i < 7; i++) {
                 if (val == 0)
                         break;
                 val >>= 1;
@@ -1282,8 +1283,8 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
         w83792d_init_client(new_client);
 
         /* A few vars need to be filled upon startup */
-        for (i = 1; i <= 7; i++) {
-                data->fan_min[i - 1] = w83792d_read_value(new_client,
+        for (i = 0; i < 7; i++) {
+                data->fan_min[i] = w83792d_read_value(new_client,
                                         W83792D_REG_FAN_MIN[i]);
         }
 
@@ -1306,10 +1307,20 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
         device_create_file_fan(new_client, 1);
         device_create_file_fan(new_client, 2);
         device_create_file_fan(new_client, 3);
-        device_create_file_fan(new_client, 4);
-        device_create_file_fan(new_client, 5);
-        device_create_file_fan(new_client, 6);
-        device_create_file_fan(new_client, 7);
+
+        /* Read GPIO enable register to check if pins for fan 4,5 are used as
+           GPIO */
+        val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
+        if (!(val1 & 0x40))
+                device_create_file_fan(new_client, 4);
+        if (!(val1 & 0x20))
+                device_create_file_fan(new_client, 5);
+
+        val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
+        if (val1 & 0x40)
+                device_create_file_fan(new_client, 6);
+        if (val1 & 0x04)
+                device_create_file_fan(new_client, 7);
 
         device_create_file_temp1(new_client);           /* Temp1 */
         device_create_file_temp_add(new_client, 2);     /* Temp2 */
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 79861ee12a29..9d59dc62e6d2 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -787,6 +787,9 @@ static const struct usb_device_id cxacru_usb_ids[] = {
         { /* V = Conexant                       P = ADSL modem (Hasbani project)        */
                 USB_DEVICE(0x0572, 0xcb00),     .driver_info = (unsigned long) &cxacru_cb00
         },
+        { /* V = Conexant             P = ADSL modem (Well PTI-800 */
+                USB_DEVICE(0x0572, 0xcb02),     .driver_info = (unsigned long) &cxacru_cb00
+        },
         { /* V = Conexant                       P = ADSL modem                          */
                 USB_DEVICE(0x0572, 0xcb01),     .driver_info = (unsigned long) &cxacru_cb00
         },
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 5131d88e8c5b..29b5b2a6e183 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -219,6 +219,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
                         goto done;
                 }
         }
+        synchronize_irq(dev->irq);
 
         /* FIXME until the generic PM interfaces change a lot more, this
          * can't use PCI D1 and D2 states.  For example, the confusion
@@ -392,7 +393,7 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
 
         dev->dev.power.power_state = PMSG_ON;
 
-        hcd->saw_irq = 0;
+        clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
 
         if (hcd->driver->resume) {
                 retval = hcd->driver->resume(hcd);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 5e5f65a475ab..da24c31ee00d 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1315,11 +1315,12 @@ static int hcd_unlink_urb (struct urb *urb, int status)
          * finish unlinking the initial failed usb_set_address()
          * or device descriptor fetch.
          */
-        if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
+        if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags)
+            && hcd->self.root_hub != urb->dev) {
                 dev_warn (hcd->self.controller, "Unlink after no-IRQ?  "
                         "Controller is probably using the wrong IRQ."
                         "\n");
-                hcd->saw_irq = 1;
+                set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
         }
 
         urb->status = status;
@@ -1649,13 +1650,15 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r)
         struct usb_hcd          *hcd = __hcd;
         int                     start = hcd->state;
 
-        if (start == HC_STATE_HALT)
+        if (unlikely(start == HC_STATE_HALT ||
+            !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
                 return IRQ_NONE;
         if (hcd->driver->irq (hcd, r) == IRQ_NONE)
                 return IRQ_NONE;
 
-        hcd->saw_irq = 1;
-        if (hcd->state == HC_STATE_HALT)
+        set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+        if (unlikely(hcd->state == HC_STATE_HALT))
                 usb_hc_died (hcd);
         return IRQ_HANDLED;
 }
@@ -1768,6 +1771,8 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
         dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
         /* till now HC has been in an indeterminate state ... */
         if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
                 dev_err(hcd->self.controller, "can't reset\n");
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 24a62a2ff86d..c8a1b350e2cf 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -72,7 +72,12 @@ struct usb_hcd {	/* usb_bus.hcpriv points to this */
          * hardware info/state
          */
         const struct hc_driver  *driver;        /* hw-specific hooks */
-        unsigned                saw_irq : 1;
+
+        /* Flags that need to be manipulated atomically */
+        unsigned long           flags;
+#define HCD_FLAG_HW_ACCESSIBLE  0x00000001
+#define HCD_FLAG_SAW_IRQ        0x00000002
+
         unsigned                can_wakeup:1;   /* hw supports wakeup? */
         unsigned                remote_wakeup:1;/* sw should use wakeup? */
         unsigned                rh_registered:1;/* is root hub registered? */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 441c26064b44..13f73a836e45 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -121,8 +121,8 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
         return 0;
 }
 
-/* called by khubd or root hub (re)init threads; leaves HC in halt state */
-static int ehci_pci_reset(struct usb_hcd *hcd)
+/* called during probe() after chip reset completes */
+static int ehci_pci_setup(struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
@@ -141,6 +141,11 @@ static int ehci_pci_reset(struct usb_hcd *hcd)
         if (retval)
                 return retval;
 
+        /* data structure init */
+        retval = ehci_init(hcd);
+        if (retval)
+                return retval;
+
         /* NOTE:  only the parts below this line are PCI-specific */
 
         switch (pdev->vendor) {
@@ -154,7 +159,8 @@ static int ehci_pci_reset(struct usb_hcd *hcd)
                 /* AMD8111 EHCI doesn't work, according to AMD errata */
                 if (pdev->device == 0x7463) {
                         ehci_info(ehci, "ignoring AMD8111 (errata)\n");
-                        return -EIO;
+                        retval = -EIO;
+                        goto done;
                 }
                 break;
         case PCI_VENDOR_ID_NVIDIA:
@@ -207,9 +213,8 @@ static int ehci_pci_reset(struct usb_hcd *hcd)
         /* REVISIT:  per-port wake capability (PCI 0x62) currently unused */
 
         retval = ehci_pci_reinit(ehci, pdev);
-
-        /* finish init */
-        return ehci_init(hcd);
+done:
+        return retval;
 }
 
 /*-------------------------------------------------------------------------*/
@@ -228,14 +233,36 @@ static int ehci_pci_reset(struct usb_hcd *hcd)
 static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
+        unsigned long           flags;
+        int                     rc = 0;
 
         if (time_before(jiffies, ehci->next_statechange))
                 msleep(10);
 
+        /* Root hub was already suspended. Disable irq emission and
+         * mark HW unaccessible, bail out if RH has been resumed. Use
+         * the spinlock to properly synchronize with possible pending
+         * RH suspend or resume activity.
+         *
+         * This is still racy as hcd->state is manipulated outside of
+         * any locks =P But that will be a different fix.
+         */
+        spin_lock_irqsave (&ehci->lock, flags);
+        if (hcd->state != HC_STATE_SUSPENDED) {
+                rc = -EINVAL;
+                goto bail;
+        }
+        writel (0, &ehci->regs->intr_enable);
+        (void)readl(&ehci->regs->intr_enable);
+
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+        spin_unlock_irqrestore (&ehci->lock, flags);
+
         // could save FLADJ in case of Vaux power loss
         // ... we'd only use it to handle clock skew
 
-        return 0;
+        return rc;
 }
 
 static int ehci_pci_resume(struct usb_hcd *hcd)
@@ -251,6 +278,9 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
         if (time_before(jiffies, ehci->next_statechange))
                 msleep(100);
 
+        /* Mark hardware accessible again as we are out of D3 state by now */
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
         /* If CF is clear, we lost PCI Vaux power and need to restart.  */
         if (readl(&ehci->regs->configured_flag) != FLAG_CF)
                 goto restart;
@@ -319,7 +349,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
         /*
          * basic lifecycle operations
          */
-        .reset =                ehci_pci_reset,
+        .reset =                ehci_pci_setup,
         .start =                ehci_run,
 #ifdef  CONFIG_PM
         .suspend =              ehci_pci_suspend,
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 5bb872c3496d..bf03ec0d8ee2 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -912,6 +912,7 @@ submit_async (
         int                     epnum;
         unsigned long           flags;
         struct ehci_qh          *qh = NULL;
+        int                     rc = 0;
 
         qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
         epnum = ep->desc.bEndpointAddress;
@@ -926,21 +927,28 @@ submit_async (
 #endif
 
         spin_lock_irqsave (&ehci->lock, flags);
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+                               &ehci_to_hcd(ehci)->flags))) {
+                rc = -ESHUTDOWN;
+                goto done;
+        }
+
         qh = qh_append_tds (ehci, urb, qtd_list, epnum, &ep->hcpriv);
+        if (unlikely(qh == NULL)) {
+                rc = -ENOMEM;
+                goto done;
+        }
 
         /* Control/bulk operations through TTs don't need scheduling,
          * the HC and TT handle it when the TT has a buffer ready.
          */
-        if (likely (qh != NULL)) {
-                if (likely (qh->qh_state == QH_STATE_IDLE))
-                        qh_link_async (ehci, qh_get (qh));
-        }
+        if (likely (qh->qh_state == QH_STATE_IDLE))
+                qh_link_async (ehci, qh_get (qh));
+ done:
         spin_unlock_irqrestore (&ehci->lock, flags);
-        if (unlikely (qh == NULL)) {
+        if (unlikely (qh == NULL))
                 qtd_list_free (ehci, urb, qtd_list);
-                return -ENOMEM;
-        }
-        return 0;
+        return rc;
 }
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index f0c8aa1ccd5d..57e77374d228 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -602,6 +602,12 @@ static int intr_submit (
 
         spin_lock_irqsave (&ehci->lock, flags);
 
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+                               &ehci_to_hcd(ehci)->flags))) {
+                status = -ESHUTDOWN;
+                goto done;
+        }
+
         /* get qh and force any scheduling errors */
         INIT_LIST_HEAD (&empty);
         qh = qh_append_tds (ehci, urb, &empty, epnum, &ep->hcpriv);
@@ -1456,7 +1462,11 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
 
         /* schedule ... need to lock */
         spin_lock_irqsave (&ehci->lock, flags);
-        status = iso_stream_schedule (ehci, urb, stream);
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+                               &ehci_to_hcd(ehci)->flags)))
+                status = -ESHUTDOWN;
+        else
+                status = iso_stream_schedule (ehci, urb, stream);
         if (likely (status == 0))
                 itd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
         spin_unlock_irqrestore (&ehci->lock, flags);
@@ -1815,7 +1825,11 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
 
         /* schedule ... need to lock */
         spin_lock_irqsave (&ehci->lock, flags);
-        status = iso_stream_schedule (ehci, urb, stream);
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE,
+                               &ehci_to_hcd(ehci)->flags)))
+                status = -ESHUTDOWN;
+        else
+                status = iso_stream_schedule (ehci, urb, stream);
         if (status == 0)
                 sitd_link_urb (ehci, urb, ehci->periodic_size << 3, stream);
         spin_unlock_irqrestore (&ehci->lock, flags);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5c0c6c8a7a82..bf1d9abc07ac 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -115,7 +115,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-// #define OHCI_VERBOSE_DEBUG   /* not always helpful */
+#undef OHCI_VERBOSE_DEBUG       /* not always helpful */
 
 /* For initializing controller (mask in an HCFS mode too) */
 #define OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
@@ -253,6 +253,10 @@ static int ohci_urb_enqueue (
         spin_lock_irqsave (&ohci->lock, flags);
 
         /* don't submit to a dead HC */
+        if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
+                retval = -ENODEV;
+                goto fail;
+        }
         if (!HC_IS_RUNNING(hcd->state)) {
                 retval = -ENODEV;
                 goto fail;
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index e01e77bc324b..72e3b12a1926 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -53,6 +53,11 @@ static int ohci_bus_suspend (struct usb_hcd *hcd)
 
         spin_lock_irqsave (&ohci->lock, flags);
 
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+                spin_unlock_irqrestore (&ohci->lock, flags);
+                return -ESHUTDOWN;
+        }
+
         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
         switch (ohci->hc_control & OHCI_CTRL_HCFS) {
         case OHCI_USB_RESUME:
@@ -140,11 +145,19 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
         u32                     temp, enables;
         int                     status = -EINPROGRESS;
+        unsigned long           flags;
 
         if (time_before (jiffies, ohci->next_statechange))
                 msleep(5);
 
-        spin_lock_irq (&ohci->lock);
+        spin_lock_irqsave (&ohci->lock, flags);
+
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+                spin_unlock_irqrestore (&ohci->lock, flags);
+                return -ESHUTDOWN;
+        }
+
+
         ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
 
         if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
@@ -179,7 +192,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
                 ohci_dbg (ohci, "lost power\n");
                 status = -EBUSY;
         }
-        spin_unlock_irq (&ohci->lock);
+        spin_unlock_irqrestore (&ohci->lock, flags);
         if (status == -EBUSY) {
                 (void) ohci_init (ohci);
                 return ohci_restart (ohci);
@@ -297,8 +310,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
         /* handle autosuspended root:  finish resuming before
          * letting khubd or root hub timer see state changes.
          */
-        if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
-                        || !HC_IS_RUNNING(hcd->state)) {
+        if (unlikely((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
+                     || !HC_IS_RUNNING(hcd->state))) {
                 can_suspend = 0;
                 goto done;
         }
@@ -508,6 +521,9 @@ static int ohci_hub_control (
         u32             temp;
         int             retval = 0;
 
+        if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+                return -ESHUTDOWN;
+
         switch (typeReq) {
         case ClearHubFeature:
                 switch (wValue) {
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 5f22e6590cd1..1b09dde068e1 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -105,13 +105,36 @@ ohci_pci_start (struct usb_hcd *hcd)
 
 static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
 {
-        /* root hub was already suspended */
-        return 0;
+        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+        unsigned long   flags;
+        int             rc = 0;
+
+        /* Root hub was already suspended. Disable irq emission and
+         * mark HW unaccessible, bail out if RH has been resumed. Use
+         * the spinlock to properly synchronize with possible pending
+         * RH suspend or resume activity.
+         *
+         * This is still racy as hcd->state is manipulated outside of
+         * any locks =P But that will be a different fix.
+         */
+        spin_lock_irqsave (&ohci->lock, flags);
+        if (hcd->state != HC_STATE_SUSPENDED) {
+                rc = -EINVAL;
+                goto bail;
+        }
+        ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+        (void)ohci_readl(ohci, &ohci->regs->intrdisable);
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+        spin_unlock_irqrestore (&ohci->lock, flags);
+
+        return rc;
 }
 
 
 static int ohci_pci_resume (struct usb_hcd *hcd)
 {
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
         usb_hcd_resume_root_hub(hcd);
         return 0;
 }
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index d33ce3982a5f..ed550132db0b 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -717,6 +717,7 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
          * at the source, so we must turn off PIRQ.
          */
         pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
         uhci->hc_inaccessible = 1;
         hcd->poll_rh = 0;
 
@@ -733,6 +734,11 @@ static int uhci_resume(struct usb_hcd *hcd)
 
         dev_dbg(uhci_dev(uhci), "%s\n", __FUNCTION__);
 
+        /* We aren't in D3 state anymore, we do that even if dead as I
+         * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0
+         */
+        set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
         if (uhci->rh_state == UHCI_RH_RESET)    /* Dead */
                 return 0;
         spin_lock_irq(&uhci->lock);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1e737e269db9..53e3293051d4 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -387,7 +387,6 @@
 #define PCI_DEVICE_ID_NS_SC1100_SMI     0x0511
 #define PCI_DEVICE_ID_NS_SC1100_XBUS    0x0515
 #define PCI_DEVICE_ID_NS_87410          0xd001
-#define PCI_DEVICE_ID_NS_CS5535_IDE     0x002d
 
 #define PCI_VENDOR_ID_TSENG             0x100c
 #define PCI_DEVICE_ID_TSENG_W32P_2      0x3202
@@ -489,8 +488,6 @@
 #define PCI_DEVICE_ID_AMD_8151_0        0x7454
 #define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
 
-#define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
-
 #define PCI_VENDOR_ID_TRIDENT           0x1023
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
 #define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001