diff options
author | Vitaly Wool <vwool@ru.mvista.com> | 2006-12-06 05:17:49 -0500 |
---|---|---|
committer | David Woodhouse <dwmw2@infradead.org> | 2006-12-08 08:32:34 -0500 |
commit | a2c2fe4b242cb9c62951ae154594cffbb94ab2ad (patch) | |
tree | b42b889619de6667c117ef774ac4ab6f0f0270bb | |
parent | f33665d931f33a0baf44fc5d3594b23f8118eb44 (diff) |
[MTD] of_device-based physmap driver
inlined below is the patch that adds physmap driver for of_device.
It's an MTD part of the two-part support for flash/ROM devices based
on Open Firmware descriptions. The arch part (currently only PowerPC
which is no surprise) was introduced to powerpc folks earlier and
recently the older version of the powerpc part has been included into
the powerpc.git tree
(see http://www.kernel.org/git/?p=linux/kernel/git/paulus/powerpc.git;a=commitdiff;h=28f9ec349ae47c91768b7bc5607db4442c818e11).
drivers/mtd/maps/Kconfig | 9 +
drivers/mtd/maps/Makefile | 1
drivers/mtd/maps/physmap_of.c | 255 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 265 insertions(+)
Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Sergey Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-rw-r--r-- | drivers/mtd/maps/Kconfig | 9 | ||||
-rw-r--r-- | drivers/mtd/maps/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/physmap_of.c | 255 |
3 files changed, 265 insertions, 0 deletions
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index fa7466886fd6..4a51a3d639be 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig | |||
@@ -60,6 +60,15 @@ config MTD_PHYSMAP_BANKWIDTH | |||
60 | Ignore this option if you use run-time physmap configuration | 60 | Ignore this option if you use run-time physmap configuration |
61 | (i.e., run-time calling physmap_configure()). | 61 | (i.e., run-time calling physmap_configure()). |
62 | 62 | ||
63 | config MTD_PHYSMAP_OF | ||
64 | tristate "Flash device in physical memory map based on OF descirption" | ||
65 | depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM) | ||
66 | help | ||
67 | This provides a 'mapping' driver which allows the NOR Flash and | ||
68 | ROM driver code to communicate with chips which are mapped | ||
69 | physically into the CPU's memory. The mapping description here is | ||
70 | taken from OF device tree. | ||
71 | |||
63 | config MTD_SUN_UFLASH | 72 | config MTD_SUN_UFLASH |
64 | tristate "Sun Microsystems userflash support" | 73 | tristate "Sun Microsystems userflash support" |
65 | depends on SPARC && MTD_CFI | 74 | depends on SPARC && MTD_CFI |
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 34505216d403..df019be753e3 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile | |||
@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_MBX860) += mbx860.o | |||
27 | obj-$(CONFIG_MTD_CEIVA) += ceiva.o | 27 | obj-$(CONFIG_MTD_CEIVA) += ceiva.o |
28 | obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o | 28 | obj-$(CONFIG_MTD_OCTAGON) += octagon-5066.o |
29 | obj-$(CONFIG_MTD_PHYSMAP) += physmap.o | 29 | obj-$(CONFIG_MTD_PHYSMAP) += physmap.o |
30 | obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o | ||
30 | obj-$(CONFIG_MTD_PNC2000) += pnc2000.o | 31 | obj-$(CONFIG_MTD_PNC2000) += pnc2000.o |
31 | obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o | 32 | obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o |
32 | obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o | 33 | obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o |
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c new file mode 100644 index 000000000000..7efe744ad31e --- /dev/null +++ b/drivers/mtd/maps/physmap_of.c | |||
@@ -0,0 +1,255 @@ | |||
1 | /* | ||
2 | * Normal mappings of chips in physical memory for OF devices | ||
3 | * | ||
4 | * Copyright (C) 2006 MontaVista Software Inc. | ||
5 | * Author: Vitaly Wool <vwool@ru.mvista.com> | ||
6 | * | ||
7 | * This program is free software; you can redistribute it and/or modify it | ||
8 | * under the terms of the GNU General Public License as published by the | ||
9 | * Free Software Foundation; either version 2 of the License, or (at your | ||
10 | * option) any later version. | ||
11 | */ | ||
12 | |||
13 | #include <linux/module.h> | ||
14 | #include <linux/types.h> | ||
15 | #include <linux/kernel.h> | ||
16 | #include <linux/init.h> | ||
17 | #include <linux/slab.h> | ||
18 | #include <linux/device.h> | ||
19 | #include <linux/mtd/mtd.h> | ||
20 | #include <linux/mtd/map.h> | ||
21 | #include <linux/mtd/partitions.h> | ||
22 | #include <linux/mtd/physmap.h> | ||
23 | #include <asm/io.h> | ||
24 | #include <asm/prom.h> | ||
25 | #include <asm/of_device.h> | ||
26 | #include <asm/of_platform.h> | ||
27 | |||
28 | struct physmap_flash_info { | ||
29 | struct mtd_info *mtd; | ||
30 | struct map_info map; | ||
31 | struct resource *res; | ||
32 | #ifdef CONFIG_MTD_PARTITIONS | ||
33 | int nr_parts; | ||
34 | struct mtd_partition *parts; | ||
35 | #endif | ||
36 | }; | ||
37 | |||
38 | static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; | ||
39 | #ifdef CONFIG_MTD_PARTITIONS | ||
40 | static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; | ||
41 | #endif | ||
42 | |||
43 | #ifdef CONFIG_MTD_PARTITIONS | ||
44 | static int parse_flash_partitions(struct device_node *node, | ||
45 | struct mtd_partition **parts) | ||
46 | { | ||
47 | int i, plen, retval = -ENOMEM; | ||
48 | const u32 *part; | ||
49 | const char *name; | ||
50 | |||
51 | part = get_property(node, "partitions", &plen); | ||
52 | if (part == NULL) | ||
53 | goto err; | ||
54 | |||
55 | retval = plen / (2 * sizeof(u32)); | ||
56 | *parts = kzalloc(retval * sizeof(struct mtd_partition), GFP_KERNEL); | ||
57 | if (*parts == NULL) { | ||
58 | printk(KERN_ERR "Can't allocate the flash partition data!\n"); | ||
59 | goto err; | ||
60 | } | ||
61 | |||
62 | name = get_property(node, "partition-names", &plen); | ||
63 | |||
64 | for (i = 0; i < retval; i++) { | ||
65 | (*parts)[i].offset = *part++; | ||
66 | (*parts)[i].size = *part & ~1; | ||
67 | if (*part++ & 1) /* bit 0 set signifies read only partition */ | ||
68 | (*parts)[i].mask_flags = MTD_WRITEABLE; | ||
69 | |||
70 | if (name != NULL && plen > 0) { | ||
71 | int len = strlen(name) + 1; | ||
72 | |||
73 | (*parts)[i].name = (char *)name; | ||
74 | plen -= len; | ||
75 | name += len; | ||
76 | } else | ||
77 | (*parts)[i].name = "unnamed"; | ||
78 | } | ||
79 | err: | ||
80 | return retval; | ||
81 | } | ||
82 | #endif | ||
83 | |||
84 | static int of_physmap_remove(struct of_device *dev) | ||
85 | { | ||
86 | struct physmap_flash_info *info; | ||
87 | |||
88 | info = dev_get_drvdata(&dev->dev); | ||
89 | if (info == NULL) | ||
90 | return 0; | ||
91 | dev_set_drvdata(&dev->dev, NULL); | ||
92 | |||
93 | if (info->mtd != NULL) { | ||
94 | #ifdef CONFIG_MTD_PARTITIONS | ||
95 | if (info->nr_parts) { | ||
96 | del_mtd_partitions(info->mtd); | ||
97 | kfree(info->parts); | ||
98 | } else { | ||
99 | del_mtd_device(info->mtd); | ||
100 | } | ||
101 | #else | ||
102 | del_mtd_device(info->mtd); | ||
103 | #endif | ||
104 | map_destroy(info->mtd); | ||
105 | } | ||
106 | |||
107 | if (info->map.virt != NULL) | ||
108 | iounmap(info->map.virt); | ||
109 | |||
110 | if (info->res != NULL) { | ||
111 | release_resource(info->res); | ||
112 | kfree(info->res); | ||
113 | } | ||
114 | |||
115 | return 0; | ||
116 | } | ||
117 | |||
118 | static int __devinit of_physmap_probe(struct of_device *dev, const struct of_device_id *match) | ||
119 | { | ||
120 | struct device_node *dp = dev->node; | ||
121 | struct resource res; | ||
122 | struct physmap_flash_info *info; | ||
123 | const char **probe_type; | ||
124 | const char *of_probe; | ||
125 | const u32 *width; | ||
126 | int err; | ||
127 | |||
128 | |||
129 | if (of_address_to_resource(dp, 0, &res)) { | ||
130 | dev_err(&dev->dev, "Can't get the flash mapping!\n"); | ||
131 | err = -EINVAL; | ||
132 | goto err_out; | ||
133 | } | ||
134 | |||
135 | dev_dbg(&dev->dev, "physmap flash device: %.8llx at %.8llx\n", | ||
136 | (unsigned long long)res.end - res.start + 1, | ||
137 | (unsigned long long)res.start); | ||
138 | |||
139 | info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); | ||
140 | if (info == NULL) { | ||
141 | err = -ENOMEM; | ||
142 | goto err_out; | ||
143 | } | ||
144 | memset(info, 0, sizeof(*info)); | ||
145 | |||
146 | dev_set_drvdata(&dev->dev, info); | ||
147 | |||
148 | info->res = request_mem_region(res.start, res.end - res.start + 1, | ||
149 | dev->dev.bus_id); | ||
150 | if (info->res == NULL) { | ||
151 | dev_err(&dev->dev, "Could not reserve memory region\n"); | ||
152 | err = -ENOMEM; | ||
153 | goto err_out; | ||
154 | } | ||
155 | |||
156 | width = get_property(dp, "bank-width", NULL); | ||
157 | if (width == NULL) { | ||
158 | dev_err(&dev->dev, "Can't get the flash bank width!\n"); | ||
159 | err = -EINVAL; | ||
160 | goto err_out; | ||
161 | } | ||
162 | |||
163 | info->map.name = dev->dev.bus_id; | ||
164 | info->map.phys = res.start; | ||
165 | info->map.size = res.end - res.start + 1; | ||
166 | info->map.bankwidth = *width; | ||
167 | |||
168 | info->map.virt = ioremap(info->map.phys, info->map.size); | ||
169 | if (info->map.virt == NULL) { | ||
170 | dev_err(&dev->dev, "Failed to ioremap flash region\n"); | ||
171 | err = EIO; | ||
172 | goto err_out; | ||
173 | } | ||
174 | |||
175 | simple_map_init(&info->map); | ||
176 | |||
177 | of_probe = get_property(dp, "probe-type", NULL); | ||
178 | if (of_probe == NULL) { | ||
179 | probe_type = rom_probe_types; | ||
180 | for (; info->mtd == NULL && *probe_type != NULL; probe_type++) | ||
181 | info->mtd = do_map_probe(*probe_type, &info->map); | ||
182 | } else if (!strcmp(of_probe, "CFI")) | ||
183 | info->mtd = do_map_probe("cfi_probe", &info->map); | ||
184 | else if (!strcmp(of_probe, "JEDEC")) | ||
185 | info->mtd = do_map_probe("jedec_probe", &info->map); | ||
186 | else { | ||
187 | if (strcmp(of_probe, "ROM")) | ||
188 | dev_dbg(&dev->dev, "map_probe: don't know probe type " | ||
189 | "'%s', mapping as rom\n"); | ||
190 | info->mtd = do_map_probe("mtd_rom", &info->map); | ||
191 | } | ||
192 | if (info->mtd == NULL) { | ||
193 | dev_err(&dev->dev, "map_probe failed\n"); | ||
194 | err = -ENXIO; | ||
195 | goto err_out; | ||
196 | } | ||
197 | info->mtd->owner = THIS_MODULE; | ||
198 | |||
199 | #ifdef CONFIG_MTD_PARTITIONS | ||
200 | err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0); | ||
201 | if (err > 0) { | ||
202 | add_mtd_partitions(info->mtd, info->parts, err); | ||
203 | } else if ((err = parse_flash_partitions(dp, &info->parts)) > 0) { | ||
204 | dev_info(&dev->dev, "Using OF partition information\n"); | ||
205 | add_mtd_partitions(info->mtd, info->parts, err); | ||
206 | info->nr_parts = err; | ||
207 | } else | ||
208 | #endif | ||
209 | |||
210 | add_mtd_device(info->mtd); | ||
211 | return 0; | ||
212 | |||
213 | err_out: | ||
214 | of_physmap_remove(dev); | ||
215 | return err; | ||
216 | |||
217 | return 0; | ||
218 | |||
219 | |||
220 | } | ||
221 | |||
222 | static struct of_device_id of_physmap_match[] = { | ||
223 | { | ||
224 | .type = "rom", | ||
225 | .compatible = "direct-mapped" | ||
226 | }, | ||
227 | { }, | ||
228 | }; | ||
229 | |||
230 | MODULE_DEVICE_TABLE(of, of_physmap_match); | ||
231 | |||
232 | |||
233 | static struct of_platform_driver of_physmap_flash_driver = { | ||
234 | .name = "physmap-flash", | ||
235 | .match_table = of_physmap_match, | ||
236 | .probe = of_physmap_probe, | ||
237 | .remove = of_physmap_remove, | ||
238 | }; | ||
239 | |||
240 | static int __init of_physmap_init(void) | ||
241 | { | ||
242 | return of_register_platform_driver(&of_physmap_flash_driver); | ||
243 | } | ||
244 | |||
245 | static void __exit of_physmap_exit(void) | ||
246 | { | ||
247 | of_unregister_platform_driver(&of_physmap_flash_driver); | ||
248 | } | ||
249 | |||
250 | module_init(of_physmap_init); | ||
251 | module_exit(of_physmap_exit); | ||
252 | |||
253 | MODULE_LICENSE("GPL"); | ||
254 | MODULE_AUTHOR("Vitaly Wool <vwool@ru.mvista.com>"); | ||
255 | MODULE_DESCRIPTION("Configurable MTD map driver for OF"); | ||