Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

325 files changed, 440 insertions, 434 deletions

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 020ac80d4682..620eb3f6a90a 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -250,7 +250,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
                 <title>Device ready function</title>
                 <para>
                         If the hardware interface has the ready busy pin of the NAND chip connected to a
-                        GPIO or other accesible I/O pin, this function is used to read back the state of the
+                        GPIO or other accessible I/O pin, this function is used to read back the state of the
                         pin. The function has no arguments and should return 0, if the device is busy (R/B pin 
                         is low) and 1, if the device is ready (R/B pin is high).
                         If the hardware interface does not give access to the ready busy pin, then
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
index 8c2bfc4a6358..3e082f96dc12 100644
--- a/Documentation/cgroups/cgroup_event_listener.c
+++ b/Documentation/cgroups/cgroup_event_listener.c
@@ -91,7 +91,7 @@ int main(int argc, char **argv)
 
                 if (ret == -1) {
                         perror("cgroup.event_control "
-                                        "is not accessable any more");
+                                        "is not accessible any more");
                         break;
                 }
 
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index b7eececfb195..fc8fa97a09ac 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -398,7 +398,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
         written to move_charge_at_immigrate.
 
  9.10 Memory thresholds
-        Memory controler implements memory thresholds using cgroups notification
+        Memory controller implements memory thresholds using cgroups notification
         API. You can use Documentation/cgroups/cgroup_event_listener.c to test
         it.
 
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index 59a69ec67c40..f6dece5b7014 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -81,7 +81,7 @@ Field  9 -- # of I/Os currently in progress
     The only field that should go to zero. Incremented as requests are
     given to appropriate struct request_queue and decremented as they finish.
 Field 10 -- # of milliseconds spent doing I/Os
-    This field is increases so long as field 9 is nonzero.
+    This field increases so long as field 9 is nonzero.
 Field 11 -- weighted # of milliseconds spent doing I/Os
     This field is incremented at each I/O start, I/O completion, I/O
     merge, or read of these stats by the number of I/Os in progress
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index cab61d842259..7a9e0b4b2903 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -65,18 +65,21 @@ Install kexec-tools
 
 2) Download the kexec-tools user-space package from the following URL:
 
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz
+http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools.tar.gz
 
 This is a symlink to the latest version.
 
 The latest kexec-tools git tree is available at:
 
-git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
-or
-http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git
+git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+and
+http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+
+There is also a gitweb interface available at
+http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 
 More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html
+http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
 
 3) Unpack the tarball with the tar command, as follows:
 
@@ -439,6 +442,6 @@ To Do
 Contact
 =======
 
-Vivek Goyal (vgoyal@in.ibm.com)
+Vivek Goyal (vgoyal@redhat.com)
 Maneesh Soni (maneesh@in.ibm.com)
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5e4d9a65d550..338c96ea0855 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -659,11 +659,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
         dscc4.setup=    [NET]
 
-        dynamic_printk  Enables pr_debug()/dev_dbg() calls if
-                        CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-                        These can also be switched on/off via
-                        <debugfs>/dynamic_printk/modules
-
         earlycon=       [KNL] Output early console device and options.
                 uart[8250],io,<addr>[,options]
                 uart[8250],mmio,<addr>[,options]
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index e3a55b6091e9..ab5189ae3428 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -391,8 +391,8 @@ bugme-new ë©”ì�¼ë§� 리스트나(새로운 버그 리í�¬íŠ¸ë“¤ë§Œì�´ ì�´ê³³ì—�ì„
 bugme-janitor 메�� 리스트(bugzilla� 모든 변화들� 여기서 메�로 전해진다)
 � 등�하면 �다.
 
-      http://lists.osdl.org/mailman/listinfo/bugme-new
-      http://lists.osdl.org/mailman/listinfo/bugme-janitors
+      https://lists.linux-foundation.org/mailman/listinfo/bugme-new
+      https://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 741fe66d6eca..0cfb00fd86ff 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -598,7 +598,7 @@ a 5-byte jump instruction. So there are several limitations.
 a) The instructions in DCR must be relocatable.
 b) The instructions in DCR must not include a call instruction.
 c) JTPR must not be targeted by any jump or call instruction.
-d) DCR must not straddle the border betweeen functions.
+d) DCR must not straddle the border between functions.
 
 Anyway, these limitations are checked by the in-kernel instruction
 decoder, so you don't need to worry about that.
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index b336266bea5e..50713e37c695 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -874,7 +874,7 @@ Possible values are:
  - KVM_MP_STATE_HALTED:          the vcpu has executed a HLT instruction and
                                  is waiting for an interrupt
  - KVM_MP_STATE_SIPI_RECEIVED:   the vcpu has just received a SIPI (vector
-                                 accesible via KVM_GET_VCPU_EVENTS)
+                                 accessible via KVM_GET_VCPU_EVENTS)
 
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index efb3a6a045a2..6ccaf8e1a00e 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -111,8 +111,11 @@ Running Lguest:
 
   Then use --tunnet=bridge:lg0 when launching the guest.
 
-  See http://linux-net.osdl.org/index.php/Bridge for general information
-  on how to get bridging working.
+  See:
+  
+    http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
+    
+  for general information on how to get bridging to work.
 
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bec69a8a1697..a7ba5e4e2c91 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,8 +1,8 @@
 In order to use the Ethernet bridging functionality, you'll need the
 userspace tools. These programs and documentation are available
-at http://www.linux-foundation.org/en/Net:Bridge.  The download page is
+at http://www.linuxfoundation.org/en/Net:Bridge.  The download page is
 http://prdownloads.sourceforge.net/bridge.
 
 If you still have questions, don't hesitate to post to the mailing list 
-(more info http://lists.osdl.org/mailman/listinfo/bridge).
+(more info https://lists.linux-foundation.org/mailman/listinfo/bridge).
 
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
index 61d7c9247453..0cb8cb9098f4 100644
--- a/Documentation/networking/caif/spi_porting.txt
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -32,7 +32,7 @@ the physical hardware, both with regard to SPI and to GPIOs.
         This function is called by the CAIF SPI interface to give
         you a chance to set up your hardware to be ready to receive
         a stream of data from the master. The xfer structure contains
-        both physical and logical adresses, as well as the total length
+        both physical and logical addresses, as well as the total length
         of the transfer in both directions.The dev parameter can be used
         to map to different CAIF SPI slave devices.
 
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 811872b45bee..d718bc2ff1cf 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -38,11 +38,11 @@ The Linux DCCP implementation does not currently support all the features that a
 specified in RFCs 4340...42.
 
 The known bugs are at:
-        http://linux-net.osdl.org/index.php/TODO#DCCP
+        http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP
 
 For more up-to-date versions of the DCCP implementation, please consider using
 the experimental DCCP test tree; instructions for checking this out are on:
-http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
+http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree
 
 
 Socket options
diff --git a/Documentation/networking/generic_netlink.txt b/Documentation/networking/generic_netlink.txt
index d4f8b8b9b53c..3e071115ca90 100644
--- a/Documentation/networking/generic_netlink.txt
+++ b/Documentation/networking/generic_netlink.txt
@@ -1,3 +1,3 @@
 A wiki document on how to use Generic Netlink can be found here:
 
- * http://linux-net.osdl.org/index.php/Generic_Netlink_HOWTO
+ * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 3272ed59dec7..7400d7555dc3 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1098,7 +1098,7 @@ supported currently at the toplevel.
                                  * an arbitrary array of bytes
                                  */
 
-  childnode@addresss {  /* define a child node named "childnode"
+  childnode@address {   /* define a child node named "childnode"
                                  * whose unit name is "childnode at
                                  * address"
                                  */
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index 3c00c9c3219e..d2651c47ae27 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -3,7 +3,7 @@
 sched-arch.txt
         - CPU Scheduler implementation hints for architecture specific code.
 sched-design-CFS.txt
-        - goals, design and implementation of the Complete Fair Scheduler.
+        - goals, design and implementation of the Completely Fair Scheduler.
 sched-domains.txt
         - information on scheduling domains.
 sched-nice-design.txt
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 337c924cc81f..5e83769c6aa9 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -573,7 +573,7 @@ Changes from 20041018 to 20041123
         * Backround nodev_timeout processing to DPC This enables us to
           unblock (stop dev_loss_tmo) when appopriate.
         * Fix array discovery with multiple luns.  The max_luns was 0 at
-          the time the host structure was intialized.  lpfc_cfg_params
+          the time the host structure was initialized.  lpfc_cfg_params
           then set the max_luns to the correct value afterwards.
         * Remove unused define LPFC_MAX_LUN and set the default value of
           lpfc_max_lun parameter to 512.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 9bd00fc2e823..8abd40b22b7f 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -19,7 +19,7 @@ Linux system over a sample period:
 
 - the pid of the task(process) which initialized the timer
 - the name of the process which initialized the timer
-- the function where the timer was intialized
+- the function where the timer was initialized
 - the callback function which is associated to the timer
 - the number of events (callbacks)
 
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index 09bd8e902989..b510564aac7e 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -125,7 +125,7 @@ is the size of the data item, in bytes.
 For example, here's the information displayed for the 'sched_wakeup'
 event:
 
-# cat /debug/tracing/events/sched/sched_wakeup/format
+# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/format
 
 name: sched_wakeup
 ID: 60
@@ -201,19 +201,19 @@ to the 'filter' file for the given event.
 
 For example:
 
-# cd /debug/tracing/events/sched/sched_wakeup
+# cd /sys/kernel/debug/tracing/events/sched/sched_wakeup
 # echo "common_preempt_count > 4" > filter
 
 A slightly more involved example:
 
-# cd /debug/tracing/events/sched/sched_signal_send
+# cd /sys/kernel/debug/tracing/events/signal/signal_generate
 # echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
 
 If there is an error in the expression, you'll get an 'Invalid
 argument' error when setting it, and the erroneous string along with
 an error message can be seen by looking at the filter e.g.:
 
-# cd /debug/tracing/events/sched/sched_signal_send
+# cd /sys/kernel/debug/tracing/events/signal/signal_generate
 # echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter
 -bash: echo: write error: Invalid argument
 # cat filter
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 69160779e432..faf976c0c731 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -347,8 +347,8 @@ bugzilla.kernel.org是Linux内核开å�‘者们用æ�¥è·Ÿè¸ªå†…æ ¸Bug的网站。æˆ
 最新bug的通知，�以订阅bugme-new邮件列表（�有新的bug报告会被寄到这里）
 或者订阅bugme-janitor邮件列表（所有bugzilla的�动都会被寄到这里）。
 
-        http://lists.osdl.org/mailman/listinfo/bugme-new
-        http://lists.osdl.org/mailman/listinfo/bugme-janitors
+        https://lists.linux-foundation.org/mailman/listinfo/bugme-new
+        https://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 邮件列表
diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers
index c27b0f6cdd39..5889f8df6312 100644
--- a/Documentation/zh_CN/SubmittingDrivers
+++ b/Documentation/zh_CN/SubmittingDrivers
@@ -61,7 +61,7 @@ Linux 2.4:
 Linux 2.6:
         除了�循和 2.4 版内核�样的规则外，你还需�在 linux-kernel 邮件
         列表上跟踪最新的 API �化。� Linux 2.6 内核�交驱动的顶级�系人
-        是 Andrew Morton <akpm@osdl.org>。
+        是 Andrew Morton <akpm@linux-foundation.org>。
 
 决定设备驱动能�被接�的�件
 ----------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 5a9d67aec0e7..78162c4f9544 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2007,7 +2007,7 @@ F:	drivers/scsi/dc395x.*
 DCCP PROTOCOL
 M:      Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:      dccp@vger.kernel.org
-W:      http://linux-net.osdl.org/index.php/DCCP
+W:      http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
 S:      Maintained
 F:      include/linux/dccp.h
 F:      include/linux/tfrc.h
@@ -2429,7 +2429,7 @@ ETHERNET BRIDGE
 M:      Stephen Hemminger <shemminger@linux-foundation.org>
 L:      bridge@lists.linux-foundation.org
 L:      netdev@vger.kernel.org
-W:      http://www.linux-foundation.org/en/Net:Bridge
+W:      http://www.linuxfoundation.org/en/Net:Bridge
 S:      Maintained
 F:      include/linux/netfilter_bridge/
 F:      net/bridge/
@@ -4633,7 +4633,7 @@ M:	Jeremy Fitzhardinge <jeremy@xensource.com>
 M:      Chris Wright <chrisw@sous-sol.org>
 M:      Alok Kataria <akataria@vmware.com>
 M:      Rusty Russell <rusty@rustcorp.com.au>
-L:      virtualization@lists.osdl.org
+L:      virtualization@lists.linux-foundation.org
 S:      Supported
 F:      Documentation/ia64/paravirt_ops.txt
 F:      arch/*/kernel/paravirt*
@@ -6530,7 +6530,7 @@ F:	include/linux/virtio_console.h
 VIRTIO HOST (VHOST)
 M:      "Michael S. Tsirkin" <mst@redhat.com>
 L:      kvm@vger.kernel.org
-L:      virtualization@lists.osdl.org
+L:      virtualization@lists.linux-foundation.org
 L:      netdev@vger.kernel.org
 S:      Maintained
 F:      drivers/vhost/
@@ -6800,7 +6800,7 @@ XEN HYPERVISOR INTERFACE
 M:      Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:      Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:      xen-devel@lists.xensource.com (moderated for non-subscribers)
-L:      virtualization@lists.osdl.org
+L:      virtualization@lists.linux-foundation.org
 S:      Supported
 F:      arch/x86/xen/
 F:      drivers/*/xen-*front.c
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 42ff90b46dfb..665ebf7e62a6 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {
 
 /*
  * The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
  * connected to ITE8152 (PCI and USB) should have limited DMA window
  */
 
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ba65f6eedca6..cb660bc54d7a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -70,7 +70,7 @@ static inline struct vic_device *to_vic(struct sys_device *sys)
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
  *
- * Common initialisation code for registeration
+ * Common initialisation code for registration
  * and resume.
 */
 static void vic_init2(void __iomem *base)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7b58c948a957..de2fd04e7c8a 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
                 .platform_data  = &my_flash0_platform,
 #endif
         },
-        {       /* User accessable spi - cs1 (250KHz) */
+        {       /* User accessible spi - cs1 (250KHz) */
                 .modalias       = "spi-cs1",
                 .chip_select    = 1,
                 .max_speed_hz   = 250 * 1000,
         },
-        {       /* User accessable spi - cs2 (1MHz) */
+        {       /* User accessible spi - cs2 (1MHz) */
                 .modalias       = "spi-cs2",
                 .chip_select    = 2,
                 .max_speed_hz   = 1 * 1000 * 1000,
         },
-        {       /* User accessable spi - cs3 (10MHz) */
+        {       /* User accessible spi - cs3 (10MHz) */
                 .modalias       = "spi-cs3",
                 .chip_select    = 3,
                 .max_speed_hz   = 10 * 1000 * 1000,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dafbacc25eb1..ea53f4d9b283 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -301,7 +301,7 @@ static void at91_pm_end(void)
 }
 
 
-static struct platform_suspend_ops at91_pm_ops ={
+static const struct platform_suspend_ops at91_pm_ops = {
         .valid  = at91_pm_valid_state,
         .begin  = at91_pm_begin,
         .enter  = at91_pm_enter,
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index b3a61d860c65..96273ff34956 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom)
                 t = t << 1;
         }
 
-        /* Intialize the result */
+        /* Initialize the result */
         r = 0;
 
         do {
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
index 7b9bac2d79a5..6b9be2e98e51 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,       /*  [ IN ]  DMA Channel handle */
-                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     ) {
         dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
 
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index ff7b436d0935..77f84b40dda9 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -316,7 +316,7 @@ static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
 /**
 *  @brief   Check if DMA channel is the flow controller
 *
-*  @return  1 : If DMA is a flow controler
+*  @return  1 : If DMA is a flow controller
 *           0 : Peripheral is the flow controller
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0e5ed2..16225e43f3c3 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom)
                 t = t << 1;
         }
 
-        /* Intialize the result */
+        /* Initialize the result */
         r = 0;
 
         do {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 77eb35c89cd0..8d1baf3f4683 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle)
 
 /****************************************************************************/
 /**
-*   Intializes all of the data structures associated with the DMA.
+*   Initializes all of the data structures associated with the DMA.
 *   @return
 *       >= 0    - Initialization was successfull.
 *
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 5d510130a25f..6c8da2b9fc1f 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle
 */
 /****************************************************************************/
 uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,       /*  [ IN ]  DMA Channel handle  */
-                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+                                          dmacHw_CONTROLLER_ATTRIB_e attr       /*  [ IN ]  DMA Controller attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
     );
 
 #endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
index f1236d00cb97..2cbb530db8ea 100644
--- a/arch/arm/mach-bcmring/include/csp/tmrHw.h
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -76,7 +76,7 @@ tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id
 *           certain time interval
 *
 *  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in milisecond
+*  after every time interval in millisecond
 *
 *  @return   On success: Effective interval set in mili-second
 *            On failure: 0
@@ -93,7 +93,7 @@ tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] T
 *           after certain time interval
 *
 *  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in milisecond
+*  certain time interval in millisecond
 *
 *  @return   On success: Effective interval set in mili-second
 *            On failure: 0
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d1c761..d67e2f8c22de 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@
 
 /* Data type for DMA Link List Item */
 typedef struct {
-        uint32_t sar;           /* Source Adress Register.
+        uint32_t sar;           /* Source Address Register.
                                    Address must be aligned to CTLx.SRC_TR_WIDTH.             */
         uint32_t dar;           /* Destination Address Register.
                                    Address must be aligned to CTLx.DST_TR_WIDTH.             */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea87e333..f1ecf96f2da5 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {
 
 /* Data type representing DMA channel registers */
 typedef struct {
-        dmacHw_REG64_t ChannelSar;      /*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+        dmacHw_REG64_t ChannelSar;      /*  Source Address Register. 64 bits (upper 32 bits are reserved)
                                            Address must be aligned to CTLx.SRC_TR_WIDTH.
                                          */
         dmacHw_REG64_t ChannelDar;      /*  Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index fab953b43dea..1bd73a04be20 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -110,7 +110,7 @@ static int davinci_pm_enter(suspend_state_t state)
         return ret;
 }
 
-static struct platform_suspend_ops davinci_pm_ops = {
+static const struct platform_suspend_ops davinci_pm_ops = {
         .enter          = davinci_pm_enter,
         .valid          = suspend_valid_only_mem,
 };
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index 213a4fcfeb1c..8c950e1d06be 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -33,7 +33,7 @@
 #define GEMINI_LPC_HOST_BASE    0x47000000
 #define GEMINI_LPC_IO_BASE      0x47800000
 #define GEMINI_INTERRUPT_BASE   0x48000000
-/* TODO: Different interrupt controlers when SMP
+/* TODO: Different interrupt controllers when SMP
  * #define GEMINI_INTERRUPT0_BASE       0x48000000
  * #define GEMINI_INTERRUPT1_BASE       0x49000000
  */
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 6bf81ceea137..acf17691d2cc 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -32,7 +32,7 @@ static int mx27_suspend_enter(suspend_state_t state)
         return 0;
 }
 
-static struct platform_suspend_ops mx27_suspend_ops = {
+static const struct platform_suspend_ops mx27_suspend_ops = {
         .enter = mx27_suspend_enter,
         .valid = suspend_valid_only_mem,
 };
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index a6e2aed9a49f..e76d41bb7056 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -123,7 +123,7 @@ static int lpc32xx_pm_enter(suspend_state_t state)
         return 0;
 }
 
-static struct platform_suspend_ops lpc32xx_pm_ops = {
+static const struct platform_suspend_ops lpc32xx_pm_ops = {
         .valid  = suspend_valid_only_mem,
         .enter  = lpc32xx_pm_enter,
 };
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 4dc99aa65d07..12467157afb9 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -26,7 +26,7 @@
          * The interrupt numbering scheme is defined in the
          * interrupt controller spec.  To wit:
          *
-         * Migrated the code from ARM MP port to be more consistant
+         * Migrated the code from ARM MP port to be more consistent
          * with interrupt processing , the following still holds true
          * however, all interrupts are treated the same regardless of
          * if they are local IPI or PPI
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 800f327a7ecc..1260007a9dd1 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -154,7 +154,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 {
         if (mtype == MT_DEVICE) {
                 /* The peripherals in the 88000000 - D0000000 range
-                 * are only accessable by type MT_DEVICE_NONSHARED.
+                 * are only accessible by type MT_DEVICE_NONSHARED.
                  * Adjust mtype as necessary to make this "just work."
                  */
                 if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 0cca23a85175..98ba9784aa15 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -647,7 +647,7 @@ static struct irqaction omap_wakeup_irq = {
 
 
 
-static struct platform_suspend_ops omap_pm_ops ={
+static const struct platform_suspend_ops omap_pm_ops = {
         .prepare        = omap_pm_prepare,
         .enter          = omap_pm_enter,
         .finish         = omap_pm_finish,
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index f3e043fe5eb8..11b89e9687f3 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
          * FIXME: we currently manage device-specific idle states
          *        for PER and CORE in combination with CPU-specific
          *        idle states.  This is wrong, and device-specific
-         *        idle managment needs to be separated out into 
+         *        idle management needs to be separated out into 
          *        its own code.
          */
 
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index dac2d1d9987d..9e5dc8ed51e9 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -350,7 +350,7 @@ static void omap2_pm_end(void)
         enable_hlt();
 }
 
-static struct platform_suspend_ops omap_pm_ops = {
+static const struct platform_suspend_ops omap_pm_ops = {
         .begin          = omap2_pm_begin,
         .enter          = omap2_pm_enter,
         .end            = omap2_pm_end,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 5b323f28da2d..8cbbeade4b8a 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -605,7 +605,7 @@ static void omap3_pm_end(void)
         return;
 }
 
-static struct platform_suspend_ops omap_pm_ops = {
+static const struct platform_suspend_ops omap_pm_ops = {
         .begin          = omap3_pm_begin,
         .end            = omap3_pm_end,
         .enter          = omap3_pm_enter,
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index e9f4862c4de4..76cfff2db514 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -65,7 +65,7 @@ static void omap4_pm_end(void)
         return;
 }
 
-static struct platform_suspend_ops omap_pm_ops = {
+static const struct platform_suspend_ops omap_pm_ops = {
         .begin          = omap4_pm_begin,
         .end            = omap4_pm_end,
         .enter          = omap4_pm_enter,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c64578853a8d..302da7403a10 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -852,7 +852,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 }
 
 /**
- * omap_serial_init() - intialize all supported serial ports
+ * omap_serial_init() - initialize all supported serial ports
  *
  * Initializes all available UARTs as serial ports. Platforms
  * can call this function when they want to have default behaviour
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index ee3c29c57ae3..f3e60a049f98 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -119,7 +119,7 @@ static int pnx4008_pm_valid(suspend_state_t state)
                (state == PM_SUSPEND_MEM);
 }
 
-static struct platform_suspend_ops pnx4008_pm_ops = {
+static const struct platform_suspend_ops pnx4008_pm_ops = {
         .enter = pnx4008_pm_enter,
         .valid = pnx4008_pm_valid,
 };
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 462167ac05f9..cdf7f41e2bb3 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void)
 }
 #endif
 
-/* USB Open Host Controler Interface */
+/* USB Open Host Controller Interface */
 static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
         .port_mode = PMM_NPS_MODE,
         .flags = ENABLE_PORT_ALL
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 166c15f62916..978e1b289544 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -96,7 +96,7 @@ void pxa_pm_finish(void)
                 pxa_cpu_pm_fns->finish();
 }
 
-static struct platform_suspend_ops pxa_pm_ops = {
+static const struct platform_suspend_ops pxa_pm_ops = {
         .valid          = pxa_pm_valid,
         .enter          = pxa_pm_enter,
         .prepare        = pxa_pm_prepare,
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index e68d46d415f3..785880f67b60 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -869,7 +869,7 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info)
 }
 
 #ifdef CONFIG_PM
-static struct platform_suspend_ops sharpsl_pm_ops = {
+static const struct platform_suspend_ops sharpsl_pm_ops = {
         .prepare        = pxa_pm_prepare,
         .finish         = pxa_pm_finish,
         .enter          = corgi_pxa_pm_enter,
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index e7d03ab41d80..372ea6855454 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
         /* Set all DMA configuration to be DMA, not SDMA */
         writel(0xffffff, S3C_SYSREG(0x110));
 
-        /* Register standard DMA controlers */
+        /* Register standard DMA controllers */
         s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
         s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
 
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index c83fdc80edfd..ab9fc4470d36 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -120,7 +120,7 @@ unsigned long sleep_phys_sp(void *sp)
         return virt_to_phys(sp);
 }
 
-static struct platform_suspend_ops sa11x0_pm_ops = {
+static const struct platform_suspend_ops sa11x0_pm_ops = {
         .enter          = sa11x0_pm_enter,
         .valid          = suspend_valid_only_mem,
 };
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 3560f8c1e723..5aa2d54ebfaa 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = {
 };
 
 /* Add spear300 specific devices here */
-/* arm gpio1 device registeration */
+/* arm gpio1 device registration */
 static struct pl061_platform_data gpio1_plat_data = {
         .gpio_base      = 8,
         .irq_base       = SPEAR_GPIO1_INT_BASE,
@@ -451,7 +451,7 @@ void __init spear300_init(void)
         /* call spear3xx family common init function */
         spear3xx_init();
 
-        /* shared irq registeration */
+        /* shared irq registration */
         shirq_ras1.regs.base =
                 ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
         if (shirq_ras1.regs.base) {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 96a1ab824bac..53b41b52d7ee 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -266,7 +266,7 @@ void __init spear310_init(void)
         /* call spear3xx family common init function */
         spear3xx_init();
 
-        /* shared irq registeration */
+        /* shared irq registration */
         base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
         if (base) {
                 /* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 6a1219549369..88b465284c36 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -519,7 +519,7 @@ void __init spear320_init(void)
         /* call spear3xx family common init function */
         spear3xx_init();
 
-        /* shared irq registeration */
+        /* shared irq registration */
         base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
         if (base) {
                 /* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index e87313aeae20..52f553c8c46d 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -22,7 +22,7 @@
 #include <mach/spear.h>
 
 /* Add spear3xx machines common devices here */
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data = {
         .gpio_base      = 0,
         .irq_base       = SPEAR_GPIO_INT_BASE,
@@ -41,7 +41,7 @@ struct amba_device gpio_device = {
         .irq = {IRQ_BASIC_GPIO, NO_IRQ},
 };
 
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device = {
         .dev = {
                 .init_name = "uart",
@@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
 
 pmx_fail:
         if (ret)
-                printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+                printk(KERN_ERR "padmux: registration failed. err no: %d\n",
                                 ret);
 }
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index baf6bcc3169c..f2fe14e8471d 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -23,7 +23,7 @@
 #include <mach/spear.h>
 
 /* Add spear6xx machines common devices here */
-/* uart device registeration */
+/* uart device registration */
 struct amba_device uart_device[] = {
         {
                 .dev = {
@@ -50,7 +50,7 @@ struct amba_device uart_device[] = {
         }
 };
 
-/* gpio device registeration */
+/* gpio device registration */
 static struct pl061_platform_data gpio_plat_data[] = {
         {
                 .gpio_base      = 0,
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 801b21e7f677..32a7b0f7e9f7 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM
         bool "Dual RAM"
         help
                 Select this if you want support for Dual RAM phones.
-                This is two RAM memorys on different EMIFs.
+                This is two RAM memories on different EMIFs.
 endchoice
 
 config U300_DEBUG
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2df732c..6193aaa47794 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
  * @src_addr: transfer source address
  * @dst_addr: transfer destination address
  * @link_addr:  physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
  * @phy_this: physical address of current lli (only used by pool_free)
  */
 struct coh901318_lli {
@@ -90,7 +90,7 @@ struct powersave {
  * struct coh901318_platform - platform arch structure
  * @chans_slave: specifying dma slave channels
  * @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memeory access (on / off)
+ * @access_memory_state: requesting DMA memory access (on / off)
  * @chan_conf: dma channel configurations
  * @max_channels: max number of dma chanenls
  */
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c29f2839f1d2..2b269c955524 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,7 +18,6 @@
 #include <asm/smp_plat.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
-#include <asm/smp_plat.h>
 
 #include "mm.h"
 
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 58a49cc83797..ba65c9231a78 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -70,7 +70,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
 /* all normal IRQs can be FIQs */
 #define FIQ_START       0
-/* switch betwean IRQ and FIQ */
+/* switch between IRQ and FIQ */
 extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
 
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 6864a997f2ca..1eee85a8abb3 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -351,7 +351,7 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 27cfca597699..5bf3f2f09e74 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -355,7 +355,7 @@ static void s3c_pm_finish(void)
         s3c_pm_check_cleanup();
 }
 
-static struct platform_suspend_ops s3c_pm_ops = {
+static const struct platform_suspend_ops s3c_pm_ops = {
         .enter          = s3c_pm_enter,
         .prepare        = s3c_pm_prepare,
         .finish         = s3c_pm_finish,
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index f021edfeaab0..32d680eb6f48 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -176,7 +176,7 @@ out:
         return 0;
 }
 
-static struct platform_suspend_ops avr32_pm_ops = {
+static const struct platform_suspend_ops avr32_pm_ops = {
         .valid  = avr32_pm_valid_state,
         .enter  = avr32_pm_enter,
 };
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 32529a03b266..725bb35f3aaa 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1418,7 +1418,7 @@
 #define SADD_LEN        0x0002  /* Slave Address Length                                                 */
 #define STDVAL          0x0004  /* Slave Transmit Data Valid                                    */
 #define NAK                     0x0008  /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN                     0x0010  /* General Call Adrress Matching Enabled                */
+#define GEN                     0x0010  /* General Call Address Matching Enabled                */
 
 /* TWI_SLAVE_STAT Masks                                                                                                                 */
 #define SDIR            0x0001  /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 42fa87e8375c..3c648a077e75 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -223,7 +223,7 @@ static int bfin_pm_enter(suspend_state_t state)
         return 0;
 }
 
-struct platform_suspend_ops bfin_pm_ops = {
+static const struct platform_suspend_ops bfin_pm_ops = {
         .enter = bfin_pm_enter,
         .valid  = bfin_pm_valid,
 };
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
index e705f5cce969..d671fed451c9 100644
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -139,7 +139,7 @@ copy_nand_to_ram:
         lsrq    8, $r4
         move.b  $r4, [$r1]      ; Row address
         lsrq    8, $r4
-        move.b  $r4, [$r1]      ; Row adddress
+        move.b  $r4, [$r1]      ; Row address
         moveq   20, $r4
 2:      bne     2b
         subq    1, $r4
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index d474818a537e..461c089db765 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -1,5 +1,5 @@
 /*
- * The following devices are accessable using this driver using
+ * The following devices are accessible using this driver using
  * GPIO_MAJOR (120) and a couple of minor numbers.
  *
  * For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10):
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index ee671c3f2c74..e8d1b236ad8c 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -48,7 +48,7 @@ config DEFAULT_CMDLINE
           builtin kernel commandline enabled.
 
 config KERNEL_COMMAND
-        string "Buildin commmand string"
+        string "Buildin command string"
         depends on DEFAULT_CMDLINE
         help
           builtin kernel commandline strings.
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index fb8f9f59a1ed..f1e17d3d6cd9 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -130,7 +130,7 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest,
 
         local_irq_save(psr);
 
-        /*Intercept the acces for PIB range*/
+        /*Intercept the access for PIB range*/
         if (iot == GPFN_PIB) {
                 if (!dir)
                         lsapic_write(vcpu, src_pa, s, *dest);
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 73613b5f1ee5..26e85e2b7a5e 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -3881,7 +3881,7 @@ _fpsp_fline:
 # FP Unimplemented Instruction stack frame and jump to that entry
 # point.
 #
-# but, if the FPU is disabled, then we need to jump to the FPU diabled
+# but, if the FPU is disabled, then we need to jump to the FPU disabled
 # entry point.
         movc            %pcr,%d0
         btst            &0x1,%d0
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index ba6ccab64018..a4c3eb60706e 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -88,7 +88,7 @@ void __init psc_init(void)
 
         /*
          * The PSC is always at the same spot, but using psc
-         * keeps things consisant with the psc_xxxx functions.
+         * keeps things consistent with the psc_xxxx functions.
          */
 
         psc = (void *) PSC_BASE;
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index e5916a516e58..647e518c90bc 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -130,7 +130,7 @@ static void restore_core_regs(void)
         au_writel(sleep_usb[1], USBD_ENABLE);
         au_sync();
 #else
-        /* enable accces to OTG memory */
+        /* enable access to OTG memory */
         au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
         au_sync();
 
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
index 4bbd3133e451..acaf91b5e461 100644
--- a/arch/mips/alchemy/devboards/pm.c
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -110,7 +110,7 @@ static void db1x_pm_end(void)
 
 }
 
-static struct platform_suspend_ops db1x_pm_ops = {
+static const struct platform_suspend_ops db1x_pm_ops = {
         .valid          = suspend_valid_only_mem,
         .begin          = db1x_pm_begin,
         .enter          = db1x_pm_enter,
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
index 076f2eeaa575..c86ef094ec37 100644
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
 }
 
 /* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addreses to virtual
+ * be using ioremap() and friends to map physical addresses to virtual
  * addresses and dma_map*() and friends to map virtual addresses into DMA
  * addresses and back.
  */
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5c0a3575877c..2c0e107966ad 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
 
 /* Early prototypes of the QI LB60 had only 1GB of NAND.
  * In order to support these devices aswell the partition and ecc layout is
- * initalized depending on the NAND size */
+ * initialized depending on the NAND size */
 static struct mtd_partition qi_lb60_partitions_1gb[] = {
         {
                 .name = "NAND BOOT partition",
@@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void)
         board_gpio_setup();
 
         if (qi_lb60_init_platform_devices())
-                panic("Failed to initalize platform devices\n");
+                panic("Failed to initialize platform devices\n");
 
         return 0;
 }
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 38f60f35156c..88e6aeda5bf1 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void)
         for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
                 jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
 
-        printk(KERN_INFO "JZ4740 GPIO initalized\n");
+        printk(KERN_INFO "JZ4740 GPIO initialized\n");
 
         return 0;
 }
diff --git a/arch/mips/jz4740/pm.c b/arch/mips/jz4740/pm.c
index a9994585424d..902d5b50124c 100644
--- a/arch/mips/jz4740/pm.c
+++ b/arch/mips/jz4740/pm.c
@@ -42,7 +42,7 @@ static int jz4740_pm_enter(suspend_state_t state)
         return 0;
 }
 
-static struct platform_suspend_ops jz4740_pm_ops = {
+static const struct platform_suspend_ops jz4740_pm_ops = {
         .valid          = suspend_valid_only_mem,
         .enter          = jz4740_pm_enter,
 };
diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c
index 6c1fd9001712..f55e07aee071 100644
--- a/arch/mips/loongson/common/pm.c
+++ b/arch/mips/loongson/common/pm.c
@@ -147,7 +147,7 @@ static int loongson_pm_valid_state(suspend_state_t state)
         }
 }
 
-static struct platform_suspend_ops loongson_pm_ops = {
+static const struct platform_suspend_ops loongson_pm_ops = {
         .valid  = loongson_pm_valid_state,
         .enter  = loongson_pm_enter,
 };
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index b27419c84919..a96d281f9221 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -43,7 +43,7 @@ static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
 static char *mtypes[3] = {
         "Dont use memory",
         "YAMON PROM memory",
-        "Free memmory",
+        "Free memory",
 };
 #endif
 
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 385f035b24e4..0583c463e5f1 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
         mem_access_subid.s.ror = 0;
         /* Disable Relaxed Ordering for Writes. */
         mem_access_subid.s.row = 0;
-        /* PCIe Adddress Bits <63:34>. */
+        /* PCIe Address Bits <63:34>. */
         mem_access_subid.s.ba = 0;
 
         /*
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index 73880ad29bc2..fb3d29660c42 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -57,7 +57,7 @@
 unsigned long ptv_memsize;
 
 /*
- * struct low_mem_reserved - Items in low memmory that are reserved
+ * struct low_mem_reserved - Items in low memory that are reserved
  * @start:      Physical address of item
  * @size:       Size, in bytes, of this item
  * @is_aliased: True if this is RAM aliased from another location. If false,
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 9a0be810cafa..96e69a00ffc8 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata;
 
 /*
  * allocate pci_controller and resources.
- * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_base, io_base: physical address.  0 for auto assignment.
  * mem_size and io_size means max size on auto assignment.
  * pcic must be &txx9_primary_pcic or NULL.
  */
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 4b0e15206006..6b6dc20b0beb 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -93,7 +93,7 @@ typedef struct	mem_ctlr {
 } memctl8xx_t;
 
 /*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register                                 16-9
+ * BR - Memory Controller: Base Register                                        16-9
  */
 #define BR_BA_MSK       0xffff8000      /* Base Address Mask                    */
 #define BR_AT_MSK       0x00007000      /* Address Type Mask                    */
@@ -110,7 +110,7 @@ typedef struct	mem_ctlr {
 #define BR_V            0x00000001      /* Bank Valid                           */
 
 /*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register                               16-11
+ * OR - Memory Controller: Option Register                              16-11
  */
 #define OR_AM_MSK       0xffff8000      /* Address Mask Mask                    */
 #define OR_ATM_MSK      0x00007000      /* Address Type Mask Mask               */
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 7fd90d02d8c6..c4d2b7167568 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr)
  * The pm_interval register is setup to write the SPU PC value into the
  * trace buffer at the maximum rate possible.  The trace buffer is configured
  * to store the PCs, wrapping when it is full.  The performance counter is
- * intialized to the max hardware count minus the number of events, N, between
+ * initialized to the max hardware count minus the number of events, N, between
  * samples.  Once the N events have occured, a HW counter overflow occurs
  * causing the generation of a HW counter interrupt which also stops the
  * writing of the SPU PC values to the trace buffer.  Hence the last PC
diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c
index 80234e5921f5..eda0fc2a3914 100644
--- a/arch/powerpc/platforms/52xx/lite5200_pm.c
+++ b/arch/powerpc/platforms/52xx/lite5200_pm.c
@@ -232,7 +232,7 @@ static void lite5200_pm_end(void)
         lite5200_pm_target_state = PM_SUSPEND_ON;
 }
 
-static struct platform_suspend_ops lite5200_pm_ops = {
+static const struct platform_suspend_ops lite5200_pm_ops = {
         .valid          = lite5200_pm_valid,
         .begin          = lite5200_pm_begin,
         .prepare        = lite5200_pm_prepare,
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pm.c b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
index 568cef636275..8310e8b5b57f 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pm.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pm.c
@@ -186,7 +186,7 @@ void mpc52xx_pm_finish(void)
         iounmap(mbar);
 }
 
-static struct platform_suspend_ops mpc52xx_pm_ops = {
+static const struct platform_suspend_ops mpc52xx_pm_ops = {
         .valid          = mpc52xx_pm_valid,
         .prepare        = mpc52xx_pm_prepare,
         .enter          = mpc52xx_pm_enter,
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
index 1930543c98d3..3d1ecd211776 100644
--- a/arch/powerpc/platforms/83xx/suspend-asm.S
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -231,7 +231,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
         ori     r4, r4, 0x002a
         mtspr   SPRN_DBAT0L, r4
         lis     r8, TMP_VIRT_IMMR@h
-        ori     r4, r8, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        ori     r4, r8, 0x001e  /* 1 MByte accessible from Kernel Space only */
         mtspr   SPRN_DBAT0U, r4
         isync
 
@@ -241,7 +241,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
         ori     r4, r4, 0x002a
         mtspr   SPRN_DBAT1L, r4
         lis     r9, (TMP_VIRT_IMMR + 0x01000000)@h
-        ori     r4, r9, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        ori     r4, r9, 0x001e  /* 1 MByte accessible from Kernel Space only */
         mtspr   SPRN_DBAT1U, r4
         isync
 
@@ -253,7 +253,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
         li      r4, 0x0002
         mtspr   SPRN_DBAT2L, r4
         lis     r4, KERNELBASE@h
-        ori     r4, r4, 0x001e  /* 1 MByte accessable from Kernel Space only */
+        ori     r4, r4, 0x001e  /* 1 MByte accessible from Kernel Space only */
         mtspr   SPRN_DBAT2U, r4
         isync
 
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
index 75ae77f1af6a..fd4f2f2f19e6 100644
--- a/arch/powerpc/platforms/83xx/suspend.c
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -311,7 +311,7 @@ static int mpc83xx_is_pci_agent(void)
         return ret;
 }
 
-static struct platform_suspend_ops mpc83xx_suspend_ops = {
+static const struct platform_suspend_ops mpc83xx_suspend_ops = {
         .valid = mpc83xx_suspend_valid,
         .begin = mpc83xx_suspend_begin,
         .enter = mpc83xx_suspend_enter,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index aa34cac4eb5c..747d1ee661fd 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -309,7 +309,7 @@ static void __init mpc85xx_mds_qe_init(void)
                         /* P1021 has pins muxed for QE and other functions. To
                          * enable QE UEC mode, we need to set bit QE0 for UCC1
                          * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
-                         * and QE12 for QE MII management singals in PMUXCR
+                         * and QE12 for QE MII management signals in PMUXCR
                          * register.
                          */
                                 setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index b341018326df..6c4b5837fc8a 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -566,10 +566,10 @@ static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
         case PS3_DEV_TYPE_STOR_DISK:
                 result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
 
-                /* Some devices are not accessable from the Other OS lpar. */
+                /* Some devices are not accessible from the Other OS lpar. */
                 if (result == -ENODEV) {
                         result = 0;
-                        pr_debug("%s:%u: not accessable\n", __func__,
+                        pr_debug("%s:%u: not accessible\n", __func__,
                                  __LINE__);
                 }
 
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 59d9712d7364..92290ff4761a 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -44,7 +44,7 @@
  * @lock:
  * @ipi_debug_brk_mask:
  *
- * The HV mantains per SMT thread mappings of HV outlet to HV plug on
+ * The HV maintains per SMT thread mappings of HV outlet to HV plug on
  * behalf of the guest.  These mappings are implemented as 256 bit guest
  * supplied bitmaps indexed by plug number.  The addresses of the bitmaps
  * are registered with the HV through lv1_configure_irq_state_bitmap().
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index e19ff021e711..f106662f4381 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -55,7 +55,7 @@ static void hc_stop(struct seq_file *m, void *p)
 static int hc_show(struct seq_file *m, void *p)
 {
         unsigned long h_num = (unsigned long)p;
-        struct hcall_stats *hs = (struct hcall_stats *)m->private;
+        struct hcall_stats *hs = m->private;
 
         if (hs[h_num].num_calls) {
                 if (cpu_has_feature(CPU_FTR_PURR))
diff --git a/arch/powerpc/platforms/pseries/suspend.c b/arch/powerpc/platforms/pseries/suspend.c
index ed72098bb4e3..a8ca289ff267 100644
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -153,7 +153,7 @@ static struct sysdev_class suspend_sysdev_class = {
         .name = "power",
 };
 
-static struct platform_suspend_ops pseries_suspend_ops = {
+static const struct platform_suspend_ops pseries_suspend_ops = {
         .valid          = suspend_valid_only_mem,
         .begin          = pseries_suspend_begin,
         .prepare_late   = pseries_prepare_late,
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 44de8559c975..e9381bfefb21 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -53,7 +53,7 @@ static int pmc_suspend_valid(suspend_state_t state)
         return 1;
 }
 
-static struct platform_suspend_ops pmc_suspend_ops = {
+static const struct platform_suspend_ops pmc_suspend_ops = {
         .valid = pmc_suspend_valid,
         .enter = pmc_suspend_enter,
 };
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index 4499a3749d40..adc9b4bba828 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -143,7 +143,7 @@ static int hp6x0_pm_enter(suspend_state_t state)
         return 0;
 }
 
-static struct platform_suspend_ops hp6x0_pm_ops = {
+static const struct platform_suspend_ops hp6x0_pm_ops = {
         .enter          = hp6x0_pm_enter,
         .valid          = suspend_valid_only_mem,
 };
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index e55968712706..a6f95ae4aae7 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -141,7 +141,7 @@ static int sh_pm_enter(suspend_state_t state)
         return 0;
 }
 
-static struct platform_suspend_ops sh_pm_ops = {
+static const struct platform_suspend_ops sh_pm_ops = {
         .enter          = sh_pm_enter,
         .valid          = suspend_valid_only_mem,
 };
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index eb4cc4ec7952..d1bffbcd9d52 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page)
 }
 
 /*
- * Flush the range [start,end] of kernel virtual adddress space from
+ * Flush the range [start,end] of kernel virtual address space from
  * the I-cache.  The corresponding range must be purged from the
  * D-cache also because the SH-5 doesn't have cache snooping between
  * the caches.  The addresses will be visible through the superpage
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 42ad2ba85010..1e9770936c3b 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] =
 static const char CHAFSR_IERR_msg[] =
         "Internal processor error";
 static const char CHAFSR_ISAP_msg[] =
-        "System request parity error on incoming addresss";
+        "System request parity error on incoming address";
 static const char CHAFSR_UCU_msg[] =
         "Uncorrectable E-cache ECC error for ifetch/data";
 static const char CHAFSR_UCC_msg[] =
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 271de94c3810..b4389a468fb6 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
 
 static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
-                                  unsigned long adddress)
+                                  unsigned long address)
 {
         ___pmd_free_tlb(tlb, pmd);
 }
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c6efecf85a6a..53fd1d5a1fe0 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -901,7 +901,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
 /*
  * The below -8 is to reserve 8 bytes on top of the ring0 stack.
  * This is necessary to guarantee that the entire "struct pt_regs"
- * is accessable even if the CPU haven't stored the SS/ESP registers
+ * is accessible even if the CPU haven't stored the SS/ESP registers
  * on the stack (interrupt gate does not save these registers
  * when switching to the same priv ring).
  * Therefore beware: accessing the ss/esp fields of the
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index d2fdb0826df2..57ca77787220 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
 
         dma_dom->aperture_size += APERTURE_RANGE_SIZE;
 
-        /* Intialize the exclusion range if necessary */
+        /* Initialize the exclusion range if necessary */
         for_each_iommu(iommu) {
                 if (iommu->exclusion_start &&
                     iommu->exclusion_start >= dma_dom->aperture[index]->offset
@@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
 
 /*
  * Allocates a new protection domain usable for the dma_ops functions.
- * It also intializes the page table and the address allocator data
+ * It also initializes the page table and the address allocator data
  * structures required for the dma_ops interface
  */
 static struct dma_ops_domain *dma_ops_domain_alloc(void)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 9f54b209c378..fc293dc8dc35 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -126,7 +126,7 @@ ENTRY(startup_32)
         movsl
         movl pa(boot_params) + NEW_CL_POINTER,%esi
         andl %esi,%esi
-        jz 1f                   # No comand line
+        jz 1f                   # No command line
         movl $pa(boot_command_line),%edi
         movl $(COMMAND_LINE_SIZE/4),%ecx
         rep
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 65df603622b2..25bfdbb5b130 100644
--- a/arch/x86/platform/mrst/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -103,7 +103,7 @@ struct dw_spi_reg {
 static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
 
 static u32 *pclk_spi0;
-/* Always contains an accessable address, start with 0 */
+/* Always contains an accessible address, start with 0 */
 static struct dw_spi_reg *pspi;
 
 static struct kmsg_dumper dw_dumper;
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 4cd59b0d7c15..78ee4b1d4e85 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1030,7 +1030,7 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
 
         /*
          * Add group onto cgroup list. It might happen that bdi->dev is
-         * not initiliazed yet. Initialize this new group without major
+         * not initialized yet. Initialize this new group without major
          * and minor info and this info will be filled in once a new thread
          * comes for IO. See code above.
          */
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index bdbfaf22bd14..962a3ccff6fd 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -93,7 +93,7 @@
 
 #define AOPOBJ_AML_CONSTANT         0x01        /* Integer is an AML constant */
 #define AOPOBJ_STATIC_POINTER       0x02        /* Data is part of an ACPI table, don't delete */
-#define AOPOBJ_DATA_VALID           0x04        /* Object is intialized and data is valid */
+#define AOPOBJ_DATA_VALID           0x04        /* Object is initialized and data is valid */
 #define AOPOBJ_OBJECT_INITIALIZED   0x08        /* Region is initialized, _REG was run */
 #define AOPOBJ_SETUP_COMPLETE       0x10        /* Region setup is complete */
 #define AOPOBJ_INVALID              0x20        /* Host OS won't allow a Region address */
diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index cf29df69380b..096aebfe7f32 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -39,7 +39,7 @@
 #define EINJ_PFX "EINJ: "
 
 #define SPIN_UNIT               100                     /* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
 #define FIRMWARE_TIMEOUT        (1 * NSEC_PER_MSEC)
 
 /*
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 5850d320404c..cf6db6b7662a 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -53,7 +53,7 @@
                                      sizeof(struct acpi_table_erst)))
 
 #define SPIN_UNIT               100                     /* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
 #define FIRMWARE_TIMEOUT        (1 * NSEC_PER_MSEC)
 #define FIRMWARE_MAX_STALL      50                      /* 50us */
 
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index febb153b5a68..c423231b952b 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -319,7 +319,7 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state)
         }
 }
 
-static struct platform_suspend_ops acpi_suspend_ops = {
+static const struct platform_suspend_ops acpi_suspend_ops = {
         .valid = acpi_suspend_state_valid,
         .begin = acpi_suspend_begin,
         .prepare_late = acpi_pm_prepare,
@@ -347,7 +347,7 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state)
  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
  * been requested.
  */
-static struct platform_suspend_ops acpi_suspend_ops_old = {
+static const struct platform_suspend_ops acpi_suspend_ops_old = {
         .valid = acpi_suspend_state_valid,
         .begin = acpi_suspend_begin_old,
         .prepare_late = acpi_pm_pre_suspend,
@@ -506,7 +506,7 @@ static void acpi_pm_thaw(void)
         acpi_enable_all_runtime_gpes();
 }
 
-static struct platform_hibernation_ops acpi_hibernation_ops = {
+static const struct platform_hibernation_ops acpi_hibernation_ops = {
         .begin = acpi_hibernation_begin,
         .end = acpi_pm_end,
         .pre_snapshot = acpi_pm_prepare,
@@ -549,7 +549,7 @@ static int acpi_hibernation_begin_old(void)
  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
  * been requested.
  */
-static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
         .begin = acpi_hibernation_begin_old,
         .end = acpi_pm_end,
         .pre_snapshot = acpi_pm_pre_suspend,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 5cd0228d2daa..15a0fde4b32a 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -260,7 +260,7 @@ static int acpi_video_set_brightness(struct backlight_device *bd)
                                 vd->brightness->levels[request_level]);
 }
 
-static struct backlight_ops acpi_backlight_ops = {
+static const struct backlight_ops acpi_backlight_ops = {
         .get_brightness = acpi_video_get_brightness,
         .update_status  = acpi_video_set_brightness,
 };
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0a6a943b3779..a31fe96f7de6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2240,7 +2240,7 @@ int ata_dev_configure(struct ata_device *dev)
                         if (id[ATA_ID_CFA_KEY_MGMT] & 1)
                                 ata_dev_printk(dev, KERN_WARNING,
                                                "supports DRM functions and may "
-                                               "not be fully accessable.\n");
+                                               "not be fully accessible.\n");
                         snprintf(revbuf, 7, "CFA");
                 } else {
                         snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
@@ -2248,7 +2248,7 @@ int ata_dev_configure(struct ata_device *dev)
                         if (ata_id_has_tpm(id))
                                 ata_dev_printk(dev, KERN_WARNING,
                                                "supports DRM functions and may "
-                                               "not be fully accessable.\n");
+                                               "not be fully accessible.\n");
                 }
 
                 dev->n_sectors = ata_id_n_sectors(id);
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index b777176ff494..e079cf29ed5d 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -370,7 +370,7 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
         if (pci_resource_len(pdev, 0) == 0)
                 return -ENODEV;
 
-        /* map IO regions and intialize host accordingly */
+        /* map IO regions and initialize host accordingly */
         rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
         if (rc == -EBUSY)
                 pcim_pin_device(pdev);
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index 5042bb2dab15..f53a43ae2bbe 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -572,7 +572,7 @@ struct idt77252_dev
 #define SAR_STAT_TSQF       0x00001000 /* Transmit Status Queue full      */
 #define SAR_STAT_TMROF      0x00000800 /* Timer overflow                  */
 #define SAR_STAT_PHYI       0x00000400 /* PHY device Interrupt flag       */
-#define SAR_STAT_CMDBZ      0x00000200 /* ABR SAR Comand Busy Flag        */
+#define SAR_STAT_CMDBZ      0x00000200 /* ABR SAR Command Busy Flag       */
 #define SAR_STAT_FBQ3A      0x00000100 /* Free Buffer Queue 3 Attention   */
 #define SAR_STAT_FBQ2A      0x00000080 /* Free Buffer Queue 2 Attention   */
 #define SAR_STAT_RSQF       0x00000040 /* Receive Status Queue full       */
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 729254053758..d80d51b62a1a 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2063,7 +2063,7 @@ static int tx_init(struct atm_dev *dev)
                 - UBR Table size is 4K  
                 - UBR wait queue is 4K  
            since the table and wait queues are contiguous, all the bytes   
-           can be initialized by one memeset.  
+           can be initialized by one memeset.
         */  
         
         vcsize_sel = 0;
@@ -2089,7 +2089,7 @@ static int tx_init(struct atm_dev *dev)
                 - ABR Table size is 2K  
                 - ABR wait queue is 2K  
            since the table and wait queues are contiguous, all the bytes   
-           can be intialized by one memeset.  
+           can be initialized by one memeset.
         */  
         i = ABR_SCHED_TABLE * iadev->memSize;
         writew((i >> 11) & 0xffff, iadev->seg_reg+ABR_SBPTR_BASE);
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index e243bd49764b..000e7b2006f8 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -975,7 +975,7 @@ struct klist *bus_get_device_klist(struct bus_type *bus)
 EXPORT_SYMBOL_GPL(bus_get_device_klist);
 
 /*
- * Yes, this forcably breaks the klist abstraction temporarily.  It
+ * Yes, this forcibly breaks the klist abstraction temporarily.  It
  * just wants to sort the klist, not change reference counts and
  * take/drop locks rapidly in the process.  It does all this while
  * holding the lock for the list, so objects can't otherwise be
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 2a52270aeb30..83404973f97a 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -8,7 +8,7 @@
  *
  *
  * The driver model core calls device_pm_add() when a device is registered.
- * This will intialize the embedded device_pm_info object in the device
+ * This will initialize the embedded device_pm_info object in the device
  * and add it to the list of power-controlled devices. sysfs entries for
  * controlling device power management will also be added.
  *
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 3109bd94bc4f..78266382797e 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -1060,8 +1060,8 @@ static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data)
  * mid_setup_dma -      Setup the DMA controller
  * @pdev: Controller PCI device structure
  *
- * Initilize the DMA controller, channels, registers with DMA engine,
- * ISR. Initilize DMA controller channels.
+ * Initialize the DMA controller, channels, registers with DMA engine,
+ * ISR. Initialize DMA controller channels.
  */
 static int mid_setup_dma(struct pci_dev *pdev)
 {
@@ -1217,7 +1217,7 @@ static void middma_shutdown(struct pci_dev *pdev)
  * @pdev: Controller PCI device structure
  * @id: pci device id structure
  *
- * Initilize the PCI device, map BARs, query driver data.
+ * Initialize the PCI device, map BARs, query driver data.
  * Call setup_dma to complete contoller and chan initilzation
  */
 static int __devinit intel_mid_dma_probe(struct pci_dev *pdev,
diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h
index 60e0d1c72dee..6f8b07131ec4 100644
--- a/drivers/edac/amd8131_edac.h
+++ b/drivers/edac/amd8131_edac.h
@@ -99,7 +99,7 @@ struct amd8131_dev_info {
 
 /*
  * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
- * Controler, and ATCA-6101 has two AMD8131 chipsets, so there are
+ * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are
  * four PCIX Bridges on ATCA-6101 altogether.
  *
  * These PCIX Bridges share the same PCI Device ID and are all of
diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c
index c973004c002c..db1df59ae2b6 100644
--- a/drivers/edac/cell_edac.c
+++ b/drivers/edac/cell_edac.c
@@ -47,7 +47,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar)
         offset = address & ~PAGE_MASK;
         syndrome = (ar & 0x000000001fe00000ul) >> 21;
 
-        /* TODO: Decoding of the error addresss */
+        /* TODO: Decoding of the error address */
         edac_mc_handle_ce(mci, csrow->first_page + pfn, offset,
                           syndrome, 0, chan, "");
 }
@@ -68,7 +68,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar)
         pfn = address >> PAGE_SHIFT;
         offset = address & ~PAGE_MASK;
 
-        /* TODO: Decoding of the error addresss */
+        /* TODO: Decoding of the error address */
         edac_mc_handle_ue(mci, csrow->first_page + pfn, offset, 0, "");
 }
 
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index ff1eb7bb26c6..3d965347a673 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -259,7 +259,7 @@ enum scrub_type {
  *                      for single channel are 64 bits, for dual channel 128
  *                      bits.
  *
- * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory.
+ * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
  *                      Motherboards commonly drive two chip-select pins to
  *                      a memory stick. A single-ranked stick, will occupy
  *                      only one of those rows. The other will be unused.
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 362861c15779..81154ab296b6 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1,6 +1,6 @@
 /* Intel i7 core/Nehalem Memory Controller kernel module
  *
- * This driver supports yhe memory controllers found on the Intel
+ * This driver supports the memory controllers found on the Intel
  * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
  * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
  * and Westmere-EP.
@@ -1271,7 +1271,7 @@ static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table)
         int i;
 
         /*
-         * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
+         * On Xeon 55xx, the Intel Quick Path Arch Generic Non-core pci buses
          * aren't announced by acpi. So, we need to use a legacy scan probing
          * to detect them
          */
@@ -1864,7 +1864,7 @@ static int i7core_mce_check_error(void *priv, struct mce *mce)
         if (mce->mcgstatus & 1)
                 i7core_check_error(mci);
 
-        /* Advice mcelog that the error were handled */
+        /* Advise mcelog that the errors were handled */
         return 1;
 }
 
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
index 070cea41b661..b9f0c20df1aa 100644
--- a/drivers/edac/ppc4xx_edac.c
+++ b/drivers/edac/ppc4xx_edac.c
@@ -873,7 +873,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1)
 }
 
 /**
- * ppc4xx_edac_init_csrows - intialize driver instance rows
+ * ppc4xx_edac_init_csrows - initialize driver instance rows
  * @mci: A pointer to the EDAC memory controller instance
  *       associated with the ibm,sdram-4xx-ddr2 controller for which
  *       the csrows (i.e. banks/ranks) are being initialized.
@@ -881,7 +881,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1)
  *          currently set for the controller, from which bank width
  *          and memory typ information is derived.
  *
- * This routine intializes the virtual "chip select rows" associated
+ * This routine initializes the virtual "chip select rows" associated
  * with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2
  * controller bank/rank is mapped to a row.
  *
@@ -992,7 +992,7 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1)
 }
 
 /**
- * ppc4xx_edac_mc_init - intialize driver instance
+ * ppc4xx_edac_mc_init - initialize driver instance
  * @mci: A pointer to the EDAC memory controller instance being
  *       initialized.
  * @op: A pointer to the OpenFirmware device tree node associated
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index b14c81110575..d3a9c6e02477 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -59,7 +59,7 @@ static int nv40_set_intensity(struct backlight_device *bd)
         return 0;
 }
 
-static struct backlight_ops nv40_bl_ops = {
+static const struct backlight_ops nv40_bl_ops = {
         .options = BL_CORE_SUSPENDRESUME,
         .get_brightness = nv40_get_intensity,
         .update_status = nv40_set_intensity,
@@ -82,7 +82,7 @@ static int nv50_set_intensity(struct backlight_device *bd)
         return 0;
 }
 
-static struct backlight_ops nv50_bl_ops = {
+static const struct backlight_ops nv50_bl_ops = {
         .options = BL_CORE_SUSPENDRESUME,
         .get_brightness = nv50_get_intensity,
         .update_status = nv50_set_intensity,
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index d3046559bf05..2aef5cd3acf5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -1927,7 +1927,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
          * offset      (8  bit): opcode
          * offset + 1  (16 bit): time
          *
-         * Sleep for "time" miliseconds.
+         * Sleep for "time" milliseconds.
          */
 
         unsigned time = ROM16(bios->data[offset + 1]);
@@ -1935,7 +1935,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
         if (!iexec->execute)
                 return 3;
 
-        BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+        BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
                 offset, time);
 
         msleep(time);
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 58a0cd02c0a2..04b269d14a59 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1629,7 +1629,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS
 typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
 {
   USHORT    usPrescale;         //Ratio between Engine clock and I2C clock
-  USHORT    usVRAMAddress;      //Adress in Frame Buffer where to pace raw EDID
+  USHORT    usVRAMAddress;      //Address in Frame Buffer where to pace raw EDID
   USHORT    usStatus;           //When use output: lower byte EDID checksum, high byte hardware status
                                 //WHen use input:  lower byte as 'byte to read':currently limited to 128byte or 1byte
   UCHAR     ucSlaveAddr;        //Read from which slave
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c9fffd0389fe..2bd3469b3071 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -434,7 +434,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
         }
 
         if (timeout == 0) {
-                /* controler has timedout, re-init the h/w */
+                /* controller has timedout, re-init the h/w */
                 dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
                 (void) init_hw(dev);
                 status = -ETIMEDOUT;
@@ -498,7 +498,7 @@ static int write_i2c(struct nmk_i2c_dev *dev)
         }
 
         if (timeout == 0) {
-                /* controler has timedout, re-init the h/w */
+                /* controller has timedout, re-init the h/w */
                 dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
                 (void) init_hw(dev);
                 status = -ETIMEDOUT;
diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index 4bb997aa39d0..83d2e19d31ae 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -689,7 +689,7 @@ struct t3_swrq {
  * A T3 WQ implements both the SQ and RQ.
  */
 struct t3_wq {
-        union t3_wr *queue;             /* DMA accessable memory */
+        union t3_wr *queue;             /* DMA accessible memory */
         dma_addr_t dma_addr;            /* DMA address for HW */
         DEFINE_DMA_UNMAP_ADDR(mapping); /* unmap kruft */
         u32 error;                      /* 1 once we go to ERROR */
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index cc600c2dd0b3..2fe19ec9ba60 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -46,7 +46,6 @@
 #include <linux/timer.h>
 #include <linux/io.h>
 #include <linux/kfifo.h>
-#include <linux/mutex.h>
 
 #include <asm/byteorder.h>
 
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index dbbb0e85afe4..abd409d592ef 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -332,7 +332,7 @@ MODULE_PARM_DESC(txselect, \
 #define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl)
 
 /*
- * Per-context kernel registers.  Acess only with qib_read_kreg_ctxt()
+ * Per-context kernel registers.  Access only with qib_read_kreg_ctxt()
  * or qib_write_kreg_ctxt()
  */
 #define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0)
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index bcb1fdedb595..307eef77a172 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -229,7 +229,7 @@ config SERIO_PS2MULT
         tristate "TQC PS/2 multiplexer"
         help
           Say Y here if you have the PS/2 line multiplexer like the one
-          present on TQC boads.
+          present on TQC boards.
 
           To compile this driver as a module, choose M here: the
           module will be called ps2mult.
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 07ac77d393a4..0c9f4b158ff0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -610,7 +610,7 @@ config TOUCHSCREEN_USB_ZYTRONIC
 
 config TOUCHSCREEN_USB_ETT_TC45USB
         default y
-        bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
+        bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED
         depends on TOUCHSCREEN_USB_COMPOSITE
 
 config TOUCHSCREEN_USB_NEXIO
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 178942a2ee61..8a3c5cfc4fea 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -2318,7 +2318,7 @@ static int gigaset_probe(struct usb_interface *interface,
                  __func__, le16_to_cpu(udev->descriptor.idVendor),
                  le16_to_cpu(udev->descriptor.idProduct));
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
         cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode,
                             GIGASET_MODULENAME);
         if (!cs)
@@ -2576,7 +2576,7 @@ static int __init bas_gigaset_init(void)
 {
         int result;
 
-        /* allocate memory for our driver state and intialize it */
+        /* allocate memory for our driver state and initialize it */
         driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
                                     GIGASET_MODULENAME, GIGASET_DEVNAME,
                                     &gigops, THIS_MODULE);
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index d151dcbf770d..0ef09d0eb96b 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -513,7 +513,7 @@ gigaset_tty_open(struct tty_struct *tty)
                 return -ENODEV;
         }
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
         cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
         if (!cs)
                 goto error;
@@ -771,7 +771,7 @@ static int __init ser_gigaset_init(void)
                 return rc;
         }
 
-        /* allocate memory for our driver state and intialize it */
+        /* allocate memory for our driver state and initialize it */
         driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
                                           GIGASET_MODULENAME, GIGASET_DEVNAME,
                                           &ops, THIS_MODULE);
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 4a66338f4e7d..5e3300d8a2a5 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -695,7 +695,7 @@ static int gigaset_probe(struct usb_interface *interface,
 
         dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
         cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
         if (!cs)
                 return -ENODEV;
@@ -894,7 +894,7 @@ static int __init usb_gigaset_init(void)
 {
         int result;
 
-        /* allocate memory for our driver state and intialize it */
+        /* allocate memory for our driver state and initialize it */
         driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
                                     GIGASET_MODULENAME, GIGASET_DEVNAME,
                                     &ops, THIS_MODULE);
diff --git a/drivers/isdn/hardware/mISDN/ipac.h b/drivers/isdn/hardware/mISDN/ipac.h
index 74a6ccf9065c..8121e046b739 100644
--- a/drivers/isdn/hardware/mISDN/ipac.h
+++ b/drivers/isdn/hardware/mISDN/ipac.h
@@ -29,7 +29,7 @@ struct isac_hw {
         u32                     type;
         u32                     off;            /* offset to isac regs */
         char                    *name;
-        spinlock_t              *hwlock;        /* lock HW acccess */
+        spinlock_t              *hwlock;        /* lock HW access */
         read_reg_func           *read_reg;
         write_reg_func          *write_reg;
         fifo_func               *read_fifo;
@@ -70,7 +70,7 @@ struct ipac_hw {
         struct hscx_hw          hscx[2];
         char                    *name;
         void                    *hw;
-        spinlock_t              *hwlock;        /* lock HW acccess */
+        spinlock_t              *hwlock;        /* lock HW access */
         struct module           *owner;
         u32                     type;
         read_reg_func           *read_reg;
diff --git a/drivers/isdn/hardware/mISDN/isar.h b/drivers/isdn/hardware/mISDN/isar.h
index 4a134acd44d0..9962bdf699c7 100644
--- a/drivers/isdn/hardware/mISDN/isar.h
+++ b/drivers/isdn/hardware/mISDN/isar.h
@@ -44,7 +44,7 @@ struct isar_ch {
 struct isar_hw {
         struct  isar_ch ch[2];
         void            *hw;
-        spinlock_t      *hwlock;        /* lock HW acccess */
+        spinlock_t      *hwlock;        /* lock HW access */
         char            *name;
         struct module   *owner;
         read_reg_func   *read_reg;
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 76d9e673b4e1..309bacf1fadc 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -112,7 +112,7 @@
  * Disable rx-data:
  * If cmx is realized in hardware, rx data will be disabled if requested by
  * the upper layer. If dtmf decoding is done by software and enabled, rx data
- * will not be diabled but blocked to the upper layer.
+ * will not be disabled but blocked to the upper layer.
  *
  * HFC conference engine:
  * If it is possible to realize all features using hardware, hardware will be
diff --git a/drivers/macintosh/via-pmu-backlight.c b/drivers/macintosh/via-pmu-backlight.c
index 1cec02f6c431..ade1e656bfb2 100644
--- a/drivers/macintosh/via-pmu-backlight.c
+++ b/drivers/macintosh/via-pmu-backlight.c
@@ -15,7 +15,7 @@
 
 #define MAX_PMU_LEVEL 0xFF
 
-static struct backlight_ops pmu_backlight_data;
+static const struct backlight_ops pmu_backlight_data;
 static DEFINE_SPINLOCK(pmu_backlight_lock);
 static int sleeping, uses_pmu_bl;
 static u8 bl_curve[FB_BACKLIGHT_LEVELS];
@@ -115,7 +115,7 @@ static int pmu_backlight_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops pmu_backlight_data = {
+static const struct backlight_ops pmu_backlight_data = {
         .get_brightness = pmu_backlight_get_brightness,
         .update_status  = pmu_backlight_update_status,
 
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index cd29c8248386..8b021eb0d48c 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -2257,7 +2257,7 @@ static int pmu_sleep_valid(suspend_state_t state)
                 && (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
 }
 
-static struct platform_suspend_ops pmu_pm_ops = {
+static const struct platform_suspend_ops pmu_pm_ops = {
         .enter = powerbook_sleep,
         .valid = pmu_sleep_valid,
 };
diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h
index 2c00980acfcb..7e40035028d2 100644
--- a/drivers/media/video/cx18/cx23418.h
+++ b/drivers/media/video/cx18/cx23418.h
@@ -177,7 +177,7 @@
    IN[0] - Task handle.
    IN[1] - luma type: 0 = disable, 1 = 1D horizontal only, 2 = 1D vertical only,
                       3 = 2D H/V separable, 4 = 2D symmetric non-separable
-   IN[2] - chroma type: 0 - diable, 1 = 1D horizontal
+   IN[2] - chroma type: 0 - disable, 1 = 1D horizontal
    ReturnCode - One of the ERR_CAPTURE_... */
 #define CX18_CPU_SET_SPATIAL_FILTER_TYPE        (CPU_CMD_MASK_CAPTURE | 0x000C)
 
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 627926f6bde8..7eb79af28aa3 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -261,7 +261,7 @@ static u16 ns_to_pulse_width_count(u32 ns, u16 divider)
         u32 rem;
 
         /*
-         * The 2 lsb's of the pulse width timer count are not accessable, hence
+         * The 2 lsb's of the pulse width timer count are not accessible, hence
          * the (1 << 2)
          */
         n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */
diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h
index 188841b476e0..ebd5c4338ebb 100644
--- a/drivers/media/video/davinci/vpif.h
+++ b/drivers/media/video/davinci/vpif.h
@@ -33,7 +33,7 @@ extern spinlock_t vpif_lock;
 #define regr(reg)               readl((reg) + vpif_base)
 #define regw(value, reg)        writel(value, (reg + vpif_base))
 
-/* Register Addresss Offsets */
+/* Register Address Offsets */
 #define VPIF_PID                        (0x0000)
 #define VPIF_CH0_CTRL                   (0x0004)
 #define VPIF_CH1_CTRL                   (0x0008)
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
index 7918680917d0..3e5cf27ec2b2 100644
--- a/drivers/media/video/davinci/vpss.c
+++ b/drivers/media/video/davinci/vpss.c
@@ -85,7 +85,7 @@ enum vpss_platform_type {
 /*
  * vpss operations. Depends on platform. Not all functions are available
  * on all platforms. The api, first check if a functio is available before
- * invoking it. In the probe, the function ptrs are intialized based on
+ * invoking it. In the probe, the function ptrs are initialized based on
  * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
  */
 struct vpss_hw_ops {
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 83de97ad971e..029a4babfd61 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -1286,7 +1286,7 @@ static int omap_vout_release(struct file *file)
         videobuf_mmap_free(q);
 
         /* Even if apply changes fails we should continue
-           freeing allocated memeory */
+           freeing allocated memory */
         if (vout->streaming) {
                 u32 mask = 0;
 
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index d6bf3f82cc34..58af67f2278b 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -655,8 +655,8 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id)
                 goto out;
         }
 
-        /* Check that the hardware is accessable. If the status bytes are
-         * 0xFF then the device is not accessable, the the IRQ belongs
+        /* Check that the hardware is accessible. If the status bytes are
+         * 0xFF then the device is not accessible, the the IRQ belongs
          * to another driver.
          * 4 x u32 interrupt registers.
          */
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 494957b10bac..7f38549715b6 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -147,7 +147,7 @@ enum sn9c102_i2c_interface {
 
 struct sn9c102_sensor {
         char name[32], /* sensor name */
-             maintainer[64]; /* name of the mantainer <email> */
+             maintainer[64]; /* name of the maintainer <email> */
 
         enum sn9c102_bridge supported_bridge; /* supported SN9C1xx bridges */
 
diff --git a/drivers/media/video/tvp7002.c b/drivers/media/video/tvp7002.c
index e63b40f5a706..c799e4eb6fcd 100644
--- a/drivers/media/video/tvp7002.c
+++ b/drivers/media/video/tvp7002.c
@@ -789,7 +789,7 @@ static int tvp7002_query_dv_preset(struct v4l2_subdev *sd,
  * Get the value of a TVP7002 decoder device register.
  * Returns zero when successful, -EINVAL if register read fails or
  * access to I2C client fails, -EPERM if the call is not allowed
- * by diabled CAP_SYS_ADMIN.
+ * by disabled CAP_SYS_ADMIN.
  */
 static int tvp7002_g_register(struct v4l2_subdev *sd,
                                                 struct v4l2_dbg_register *reg)
diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index e25aca5759fb..2f973cd56408 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -13,14 +13,12 @@
 #include <linux/pci.h>
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/videobuf-dma-sg.h>
-#include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/pm_qos_params.h>
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 691620dbedd2..8b04810df469 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -268,7 +268,7 @@
 
 /* Compatibility Error : IR Disabled */
 #define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED                  (0x00010030)
-/* Compatibility Error : Inquiry Comand failed */
+/* Compatibility Error : Inquiry Command failed */
 #define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED                 (0x00010031)
 /* Compatibility Error : Device not direct access device */
 #define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS              (0x00010032)
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 3e57b61ca446..3358c0af3466 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -7977,7 +7977,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
                 NULL,                                           /* 2Eh */
                 NULL,                                           /* 2Fh */
                 "Compatibility Error: IR Disabled",             /* 30h */
-                "Compatibility Error: Inquiry Comand Failed",   /* 31h */
+                "Compatibility Error: Inquiry Command Failed",  /* 31h */
                 "Compatibility Error: Device not Direct Access "
                     "Device ",                                  /* 32h */
                 "Compatibility Error: Removable Device Found",  /* 33h */
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index d48c2c6058e1..8aefb1829fcd 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1146,7 +1146,7 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc,
  *
  * This function will delete scheduled target reset from the list and
  * try to send next target reset. This will be called from completion
- * context of any Task managment command.
+ * context of any Task management command.
  */
 
 void
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index f87a9d405a5e..ae7cad185898 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -309,7 +309,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq)
  *      @ireq: I2O block request
  *      @mptr: message body pointer
  *
- *      Builds the SG list and map it to be accessable by the controller.
+ *      Builds the SG list and map it to be accessible by the controller.
  *
  *      Returns 0 on failure or 1 on success.
  */
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 4d073f1e4502..1e1a4be8eb6c 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -402,7 +402,7 @@ config TI_DAC7512
           DAC7512 16-bit digital-to-analog converter.
 
           This driver can also be built as a module. If so, the module
-          will be calles ti_dac7512.
+          will be called ti_dac7512.
 
 config VMWARE_BALLOON
         tristate "VMware Balloon Driver"
diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c
index 9e3879ef58f2..fe8616a8d287 100644
--- a/drivers/misc/arm-charlcd.c
+++ b/drivers/misc/arm-charlcd.c
@@ -313,7 +313,7 @@ static int __init charlcd_probe(struct platform_device *pdev)
         INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
         schedule_delayed_work(&lcd->init_work, 0);
 
-        dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
+        dev_info(&pdev->dev, "initialized ARM character LCD at %08x\n",
                 lcd->phybase);
 
         return 0;
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 217f82037fc1..bfc8a8ae55df 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -257,7 +257,7 @@ static u32 get_card_status(struct mmc_card *card, struct request *req)
         cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
         err = mmc_wait_for_cmd(card->host, &cmd, 0);
         if (err)
-                printk(KERN_ERR "%s: error %d sending status comand",
+                printk(KERN_ERR "%s: error %d sending status command",
                        req->rq_disk->disk_name, err);
         return cmd.resp[0];
 }
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index c22a4c039988..afe8c6fa166a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -501,7 +501,7 @@ config MMC_SH_MMCIF
         tristate "SuperH Internal MMCIF support"
         depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
         help
-          This selects the MMC Host Interface controler (MMCIF).
+          This selects the MMC Host Interface controller (MMCIF).
 
           This driver supports MMCIF in sh7724/sh7757/sh7372.
 
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index 41e5a60493ad..ef72e874ca36 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -192,7 +192,7 @@ static inline void SEND_STOP(struct au1xmmc_host *host)
         au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host));
         au_sync();
 
-        /* Send the stop commmand */
+        /* Send the stop command */
         au_writel(STOP_CMD, HOST_CMD(host));
 }
 
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index f472c2714eb8..bbc298fd2a15 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -446,7 +446,7 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev,
         mmc->max_seg_size = 1024 * 512;
         mmc->max_blk_size = 512;
 
-        /* reset the controler */
+        /* reset the controller */
         if (sdricoh_reset(host)) {
                 dev_dbg(dev, "could not reset\n");
                 result = -EIO;
@@ -478,7 +478,7 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
         dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
                 " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
 
-        /* search pci cardbus bridge that contains the mmc controler */
+        /* search pci cardbus bridge that contains the mmc controller */
         /* the io region is already claimed by yenta_socket... */
         while ((pci_dev =
                 pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476,
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1f75a1b1f7c3..31bf376b82a0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -821,7 +821,7 @@ retry:
  *
  * Wait for command done. This is a helper function for nand_wait used when
  * we are in interrupt context. May happen when in panic and trying to write
- * an oops trough mtdoops.
+ * an oops through mtdoops.
  */
 static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
                             unsigned long timeo)
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 6a858a29db56..a6cd335c9436 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1415,12 +1415,12 @@ struct bnx2x_func_init_params {
                 else
 
 /* skip rx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
  */
 #define skip_rx_queue(bp, idx)  (NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
 /* skip tx queue
- * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ * if FCOE l2 support is disabled and this is the fcoe L2 queue
  */
 #define skip_tx_queue(bp, idx)  (NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 84e1af4d65e1..8cdcf5b39d1e 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -5037,7 +5037,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
                 memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
                 memset(&ilt, 0, sizeof(struct bnx2x_ilt));
 
-                /* initalize dummy TM client */
+                /* initialize dummy TM client */
                 ilt_cli.start = 0;
                 ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
                 ilt_cli.client_num = ILT_CLIENT_TM;
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 38ef7ca9f21d..c939683e3d61 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1633,7 +1633,7 @@
    (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
 #define MISC_REG_SW_TIMER_RELOAD_VAL_4                           0xa2fc
 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
-   in this register. addres 0 - timer 1; address 1 - timer 2, ...  address 7 -
+   in this register. address 0 - timer 1; address 1 - timer 2, ...  address 7 -
    timer 8 */
 #define MISC_REG_SW_TIMER_VAL                                    0xa5c0
 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 48cf24ff4e6f..171782e2bb39 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port)
         lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
 
         memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-        /* Note: source addres is set to be the member's PERMANENT address,
+        /* Note: source address is set to be the member's PERMANENT address,
            because we use it to identify loopback lacpdus in receive. */
         memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
         lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -881,7 +881,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker)
         marker_header = (struct bond_marker_header *)skb_put(skb, length);
 
         memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
-        /* Note: source addres is set to be the member's PERMANENT address,
+        /* Note: source address is set to be the member's PERMANENT address,
            because we use it to identify loopback MARKERs in receive. */
         memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
         marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave)
                 return -1;
         }
 
-        //check that the slave has not been intialized yet.
+        //check that the slave has not been initialized yet.
         if (SLAVE_AD_INFO(slave).port.slave != slave) {
 
                 // port initialization
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
index 63ebf76d2390..8a43c7e19701 100644
--- a/drivers/net/chelsio/subr.c
+++ b/drivers/net/chelsio/subr.c
@@ -556,7 +556,7 @@ struct chelsio_vpd_t {
 #define EEPROM_MAX_POLL   4
 
 /*
- * Read SEEPROM. A zero is written to the flag register when the addres is
+ * Read SEEPROM. A zero is written to the flag register when the address is
  * written to the Control register. The hardware device will set the flag to a
  * one when 4B have been transferred to the Data register.
  */
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c
index a8766fb2f9ab..e13b7fe9d082 100644
--- a/drivers/net/cxgb3/mc5.c
+++ b/drivers/net/cxgb3/mc5.c
@@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
 
 /*
  * Initialization that requires the OS and protocol layers to already
- * be intialized goes here.
+ * be initialized goes here.
  */
 int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
                 unsigned int nroutes)
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index ec8579a0a808..d55db6b38e7b 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -607,7 +607,7 @@ struct t3_vpd {
  *
  *      Read a 32-bit word from a location in VPD EEPROM using the card's PCI
  *      VPD ROM capability.  A zero is written to the flag bit when the
- *      addres is written to the control register.  The hardware device will
+ *      address is written to the control register.  The hardware device will
  *      set the flag to 1 when 4 bytes have been read into the data register.
  */
 int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index f5514a0d5be6..196eeda2dd6c 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -41,7 +41,7 @@ struct e1000_hw;
 struct e1000_hw_stats;
 
 /* Enumerated types specific to the e1000 hardware */
-/* Media Access Controlers */
+/* Media Access Controllers */
 typedef enum {
         e1000_undefined = 0,
         e1000_82542_rev2_0,
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4ff88a683f61..de69c54301c1 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2233,7 +2233,7 @@ static void e1000_set_rx_mode(struct net_device *netdev)
          * addresses take precedence to avoid disabling unicast filtering
          * when possible.
          *
-         * RAR 0 is used for the station MAC adddress
+         * RAR 0 is used for the station MAC address
          * if there are not 14 addresses, go ahead and clear the filters
          */
         i = 1;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cb6c7b1c1fb8..1397da118f0d 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -328,7 +328,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 
         /*
          * Ensure that the inter-port SWSM.SMBI lock bit is clear before
-         * first NVM or PHY acess. This should be done for single-port
+         * first NVM or PHY access. This should be done for single-port
          * devices, and for one port only on dual-port devices so that
          * for those devices we can still use the SMBI lock to synchronize
          * inter-port accesses to the PHY & NVM.
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 5328a2927731..5bb65b7382db 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -321,7 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
         }
 
         /*
-         * Reset the PHY before any acccess to it.  Doing so, ensures that
+         * Reset the PHY before any access to it.  Doing so, ensures that
          * the PHY is in a known good state before we read/write PHY registers.
          * The generic reset is sufficient here, because we haven't determined
          * the PHY type yet.
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index a640f1c369ae..00f89e8a9fa0 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -2986,7 +2986,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
 }
 
 /**
- *  e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
+ *  e1000_get_phy_addr_for_hv_page - Get PHY address based on page
  *  @page: page to be accessed
  **/
 static u32 e1000_get_phy_addr_for_hv_page(u32 page)
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 4fa8d2a4aef3..eb35951a2442 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1761,7 +1761,7 @@ module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param_array(mem, int, NULL, 0);
 module_param(autodetect, int, 0);
-MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
 MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
 MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
 MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 4dc39e5f0156..77fcf4459161 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -30,7 +30,7 @@
  *     or the type-DO IR port.
  *
  * IrDA chip set list from Toshiba Computer Engineering Corp.
- * model                        method  maker   controler               Version 
+ * model                        method  maker   controller              Version 
  * Portege 320CT        FIR,SIR Toshiba Oboe(Triangle) 
  * Portege 3010CT       FIR,SIR Toshiba Oboe(Sydney) 
  * Portege 3015CT       FIR,SIR Toshiba Oboe(Sydney) 
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 8d316d9cd29d..a21f5817685b 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1079,7 +1079,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc)
 
         /*
          * The defaults in the HW for RX PB 1-7 are not zero and so should be
-         * intialized to zero for non DCB mode otherwise actual total RX PB
+         * initialized to zero for non DCB mode otherwise actual total RX PB
          * would be bigger than programmed and filter space would run into
          * the PB 0 region.
          */
@@ -1167,7 +1167,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc)
 
         /*
          * The defaults in the HW for RX PB 1-7 are not zero and so should be
-         * intialized to zero for non DCB mode otherwise actual total RX PB
+         * initialized to zero for non DCB mode otherwise actual total RX PB
          * would be bigger than programmed and filter space would run into
          * the PB 0 region.
          */
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 183765cb7f25..f35554d11441 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev)
                 goto out;
         }
         /* allocate the tx and rx ring buffer descriptors. */
-        /* returns a virtual addres and a physical address. */
+        /* returns a virtual address and a physical address. */
         lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
                                          sizeof(*lp->tx_bd_v) * TX_BD_NUM,
                                          &lp->tx_bd_p, GFP_KERNEL);
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 581836867098..5976d1d51df1 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -36,7 +36,7 @@
    Rev 1.07.06 Nov.  7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
    Rev 1.07.05 Nov.  6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
    Rev 1.07.04 Sep.  6 2000 Lei-Chun Chang added ICS1893 PHY support
-   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule
+   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule
    Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
    Rev 1.07    Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
    Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 296000bf5a25..3397618d4d96 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -12,7 +12,7 @@
 /*
  * RX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of RX communication channels betwean driver and NIC.
+ * There are 2 types of RX communication channels between driver and NIC.
  * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
  * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
  * info about buffer's location, size and ID. An ID field is used to identify a
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev)
                 }
 
                 /* use PMF to accept first MAC_MCST_NUM (15) addresses */
-                /* TBD: sort addreses and write them in ascending order
+                /* TBD: sort addresses and write them in ascending order
                  * into RX_MAC_MCST regs. we skip this phase now and accept ALL
                  * multicast frames throu IMF */
                 /* accept the rest of addresses throu IMF */
@@ -1346,7 +1346,7 @@ static void print_rxfd(struct rxf_desc *rxfd)
 /*
  * TX HW/SW interaction overview
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * There are 2 types of TX communication channels betwean driver and NIC.
+ * There are 2 types of TX communication channels between driver and NIC.
  * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
  * 2) TX Data Fifo - TXD - holds descriptors of full buffers.
  *
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 7599c457abd1..b100bd50a0d7 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
                 break;
 
         case SIOCGIFHWADDR:
-                /* Get hw addres */
+                /* Get hw address */
                 memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
                 ifr.ifr_hwaddr.sa_family = tun->dev->type;
                 if (copy_to_user(argp, &ifr, ifreq_len))
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index cab96ad49e60..09cac704fdd7 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -898,7 +898,7 @@ static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
         set_mii_flow_control(vptr);
 
         /*
-           Check if new status is consisent with current status
+           Check if new status is consistent with current status
            if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
                (mii_status==curr_status)) {
            vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 8c3103fb6442..d48486d6afa1 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err {
  * struct vxge_hw_device_stats - Contains HW per-device statistics,
  * including hw.
  * @devh: HW device handle.
- * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
  * @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
  *                space.
  * @hw_info_dma_acch: One more DMA handle used subsequently to free the
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 34cff6ce6d27..4578e5b4b411 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -125,7 +125,7 @@ static u32 dscc4_pci_config_store[16];
 /* Module parameters */
 
 MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
-MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
+MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
 MODULE_LICENSE("GPL");
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug,"Enable/disable extra messages");
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index f0603327aafa..65bc334ed57b 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -232,7 +232,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m)
                         result);
                 goto error;
         }
-        /* Extract MAC addresss */
+        /* Extract MAC address */
         ddi = (void *) skb->data;
         BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
         d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 17ecaa41a807..030cbfd31704 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -186,7 +186,7 @@ enum {
  * struct i2400m_poke_table - Hardware poke table for the Intel 2400m
  *
  * This structure will be used to create a device specific poke table
- * to put the device in a consistant state at boot time.
+ * to put the device in a consistent state at boot time.
  *
  * @address: The device address to poke
  *
@@ -703,7 +703,7 @@ enum i2400m_bm_cmd_flags {
  * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
  *     rom after reading the MAC address. This is quite a dirty hack,
  *     if you ask me -- the device requires the bootrom to be
- *     intialized after reading the MAC address.
+ *     initialized after reading the MAC address.
  */
 enum i2400m_bri {
         I2400M_BRI_SOFT       = 1 << 1,
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index 7ad05d401ab5..fd14b9103951 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1064,7 +1064,7 @@
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD         0x6008                  /* Register Addres */
+#define AR5K_EEPROM_CMD         0x6008                  /* Register Address */
 #define AR5K_EEPROM_CMD_READ    0x00000001      /* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE   0x00000002      /* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET   0x00000004      /* EEPROM reset */
@@ -1084,7 +1084,7 @@
 /*
  * EEPROM config register
  */
-#define AR5K_EEPROM_CFG                 0x6010                  /* Register Addres */
+#define AR5K_EEPROM_CFG                 0x6010                  /* Register Address */
 #define AR5K_EEPROM_CFG_SIZE            0x00000003              /* Size determination override */
 #define AR5K_EEPROM_CFG_SIZE_AUTO       0
 #define AR5K_EEPROM_CFG_SIZE_4KBIT      1
@@ -1126,7 +1126,7 @@
  * Second station id register (Upper 16 bits of MAC address + PCU settings)
  */
 #define AR5K_STA_ID1                    0x8004                  /* Register Address */
-#define AR5K_STA_ID1_ADDR_U16           0x0000ffff      /* Upper 16 bits of MAC addres */
+#define AR5K_STA_ID1_ADDR_U16           0x0000ffff      /* Upper 16 bits of MAC address */
 #define AR5K_STA_ID1_AP                 0x00010000      /* Set AP mode */
 #define AR5K_STA_ID1_ADHOC              0x00020000      /* Set Ad-Hoc mode */
 #define AR5K_STA_ID1_PWR_SV             0x00040000      /* Power save reporting */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b65e86b..be4828167012 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
         b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
 }
 
-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
         struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd342ce..28e477d01587 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
         phy->calibrated = 1;
 }
 
-/* intialize B PHY power control
+/* initialize B PHY power control
  * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
  */
 static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index a5dbfea1bfad..b5cb3be0eb4b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -197,7 +197,7 @@ static irqreturn_t iwl_isr(int irq, void *data)
 
  none:
         /* re-enable interrupts here since we don't have anything to service. */
-        /* only Re-enable if diabled by irq  and no schedules tasklet. */
+        /* only Re-enable if disabled by irq  and no schedules tasklet. */
         if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->_agn.inta)
                 iwl_enable_interrupts(priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index f13a83a7e62b..36335b1b54d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1154,7 +1154,7 @@ static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
         }
 
         /* Re-enable all interrupts */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
 
@@ -1368,7 +1368,7 @@ static void iwl_irq_tasklet(struct iwl_priv *priv)
         }
 
         /* Re-enable all interrupts */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
index a08b4e56e6b1..bb1a742a98a0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-legacy.c
+++ b/drivers/net/wireless/iwlwifi/iwl-legacy.c
@@ -619,7 +619,7 @@ unplugged:
 
 none:
         /* re-enable interrupts here since we don't have anything to service. */
-        /* only Re-enable if diabled by irq */
+        /* only Re-enable if disabled by irq */
         if (test_bit(STATUS_INT_ENABLED, &priv->status))
                 iwl_enable_interrupts(priv);
         spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 4776323b1eba..49493d176515 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
         /*
          * XXX: The MAC address in the command buffer is often changed from
          * the original sent to the device. That is, the MAC address
-         * written to the command buffer often is not the same MAC adress
+         * written to the command buffer often is not the same MAC address
          * read from the command buffer when the command returns. This
          * issue has not yet been resolved and this debugging is left to
          * observe the problem.
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2c8cc954d1b6..ec2c75d77cea 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv)
         printk(KERN_DEBUG "islpci_alloc_memory\n");
 #endif
 
-        /* remap the PCI device base address to accessable */
+        /* remap the PCI device base address to accessible */
         if (!(priv->device_base =
               ioremap(pci_resource_start(priv->pdev, 0),
                       ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv)
                                    PCI_DMA_FROMDEVICE);
                 if (!priv->pci_map_rx_address[counter]) {
                         /* error mapping the buffer to device
-                           accessable memory address */
+                           accessible memory address */
                         printk(KERN_ERR "failed to map skb DMA'able\n");
                         goto out_free;
                 }
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
                 priv->data_low_rx[counter] = NULL;
         }
 
-        /* Free the acces control list and the WPA list */
+        /* Free the access control list and the WPA list */
         prism54_acl_clean(&priv->acl);
         prism54_wpa_bss_ie_clean(priv);
         mgt_clean(priv);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 2fc52bc2d7dd..d44f8e20cce0 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv)
                                    MAX_FRAGMENT_SIZE_RX + 2,
                                    PCI_DMA_FROMDEVICE);
                 if (unlikely(!priv->pci_map_rx_address[index])) {
-                        /* error mapping the buffer to device accessable memory address */
+                        /* error mapping the buffer to device accessible memory address */
                         DEBUG(SHOW_ERROR_MESSAGES,
                               "Error mapping DMA address\n");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 658542d2efe1..f3da051df39e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -273,7 +273,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
         intf->beacon = entry;
 
         /*
-         * The MAC adddress must be configured after the device
+         * The MAC address must be configured after the device
          * has been initialized. Otherwise the device can reset
          * the MAC registers.
          * The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl1251/acx.h b/drivers/net/wireless/wl1251/acx.h
index e54b21a4f8b1..efcc3aaca14f 100644
--- a/drivers/net/wireless/wl1251/acx.h
+++ b/drivers/net/wireless/wl1251/acx.h
@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg {
 /* OBSOLETE */
 #define WL1251_ACX_INTR_WAKE_ON_HOST    BIT(6)
 
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1251_ACX_INTR_TRACE_A         BIT(7)
 
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1251_ACX_INTR_TRACE_B         BIT(8)
 
 /* Command processing completion */
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index 13fbeeccf609..c0ce2c8b43b8 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -419,7 +419,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 #define WL1251_FW_NAME "wl1251-fw.bin"
 #define WL1251_NVS_NAME "wl1251-nvs.bin"
 
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
 
 #define WL1251_PART_DOWN_MEM_START      0x0
 #define WL1251_PART_DOWN_MEM_SIZE       0x16800
diff --git a/drivers/net/wireless/wl12xx/acx.h b/drivers/net/wireless/wl12xx/acx.h
index 9cbc3f40c8dd..7bd8e4db4a71 100644
--- a/drivers/net/wireless/wl12xx/acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -47,9 +47,9 @@
 #define WL1271_ACX_INTR_HW_AVAILABLE       BIT(5)
 /* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
 #define WL1271_ACX_INTR_DATA               BIT(6)
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1271_ACX_INTR_TRACE_A            BIT(7)
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1271_ACX_INTR_TRACE_B            BIT(8)
 
 #define WL1271_ACX_INTR_ALL                0xFFFFFFFF
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index ce3d31f98c55..9050dd9b62d2 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -416,8 +416,8 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
    on in case is has been shut down shortly before */
-#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
-#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
+#define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
 
 /* Macros to handle wl1271.sta_rate_set */
 #define HW_BG_RATES_MASK        0xffff
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df62e646..3e5befe4d03b 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 }
 
 /*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
  *
  * WARNING: We switch to FPAGE0 and switc back again.
  *          Making sure there is no other WL function beening called by ISR.
diff --git a/drivers/pcmcia/m32r_cfc.h b/drivers/pcmcia/m32r_cfc.h
index 8146e3bee2e8..f558e1adf954 100644
--- a/drivers/pcmcia/m32r_cfc.h
+++ b/drivers/pcmcia/m32r_cfc.h
@@ -9,7 +9,7 @@
 #endif
 
 /*
- * M32R PC Card Controler
+ * M32R PC Card Controller
  */
 #define M32R_PCC0_BASE        0x00ef7000
 #define M32R_PCC1_BASE        0x00ef7020
diff --git a/drivers/pcmcia/m32r_pcc.h b/drivers/pcmcia/m32r_pcc.h
index e4fffe417ba9..f95c58563bc8 100644
--- a/drivers/pcmcia/m32r_pcc.h
+++ b/drivers/pcmcia/m32r_pcc.h
@@ -5,7 +5,7 @@
 #define M32R_MAX_PCC    2
 
 /*
- * M32R PC Card Controler
+ * M32R PC Card Controller
  */
 #define M32R_PCC0_BASE        0x00ef7000
 #define M32R_PCC1_BASE        0x00ef7020
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 99d4f23cb435..0db482771fb5 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1198,7 +1198,7 @@ static int __init m8xx_probe(struct platform_device *ofdev,
         out_be32(M8XX_PGCRX(1),
                  M8XX_PGCRX_CXOE | (mk_int_int_mask(hwirq) << 16));
 
-        /* intialize the fixed memory windows */
+        /* initialize the fixed memory windows */
 
         for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
                 for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index ee40d681edd0..c5c4b8c32eb8 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -1021,7 +1021,7 @@ static int update_bl_status(struct backlight_device *bd)
         return 0;
 }
 
-static struct backlight_ops acer_bl_ops = {
+static const struct backlight_ops acer_bl_ops = {
         .get_brightness = read_brightness,
         .update_status = update_bl_status,
 };
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index d235f44fd7a3..f3aa6a7fdab6 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -640,7 +640,7 @@ static int update_bl_status(struct backlight_device *bd)
         return asus_lcd_set(asus, value);
 }
 
-static struct backlight_ops asusbl_ops = {
+static const struct backlight_ops asusbl_ops = {
         .get_brightness = asus_read_brightness,
         .update_status = update_bl_status,
 };
diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c
index ca05aefd03bf..4633fd8532cc 100644
--- a/drivers/platform/x86/asus_acpi.c
+++ b/drivers/platform/x86/asus_acpi.c
@@ -1467,7 +1467,7 @@ static int asus_hotk_remove(struct acpi_device *device, int type)
         return 0;
 }
 
-static struct backlight_ops asus_backlight_data = {
+static const struct backlight_ops asus_backlight_data = {
         .get_brightness = read_brightness,
         .update_status  = set_brightness_status,
 };
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c
index cf8a89a0d8f5..34657f96b5a5 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell-laptop.c
@@ -546,7 +546,7 @@ out:
         return buffer->output[1];
 }
 
-static struct backlight_ops dell_ops = {
+static const struct backlight_ops dell_ops = {
         .get_brightness = dell_get_intensity,
         .update_status  = dell_send_intensity,
 };
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index e9fc530e7dc2..49d9ad708f89 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -1126,7 +1126,7 @@ static int update_bl_status(struct backlight_device *bd)
         return set_brightness(bd, bd->props.brightness);
 }
 
-static struct backlight_ops eeepcbl_ops = {
+static const struct backlight_ops eeepcbl_ops = {
         .get_brightness = read_brightness,
         .update_status = update_bl_status,
 };
diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c
index ad88b2ec34a1..19e92b2a7f7e 100644
--- a/drivers/platform/x86/fujitsu-laptop.c
+++ b/drivers/platform/x86/fujitsu-laptop.c
@@ -437,7 +437,7 @@ static int bl_update_status(struct backlight_device *b)
         return ret;
 }
 
-static struct backlight_ops fujitsubl_ops = {
+static const struct backlight_ops fujitsubl_ops = {
         .get_brightness = bl_get_brightness,
         .update_status = bl_update_status,
 };
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index b4a95bb2f232..5e83370b0812 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -858,7 +858,7 @@ static int sony_backlight_get_brightness(struct backlight_device *bd)
 }
 
 static struct backlight_device *sony_backlight_device;
-static struct backlight_ops sony_backlight_ops = {
+static const struct backlight_ops sony_backlight_ops = {
         .update_status = sony_backlight_update_status,
         .get_brightness = sony_backlight_get_brightness,
 };
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a974ca383cb9..dd599585c6a9 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -6110,7 +6110,7 @@ static void tpacpi_brightness_notify_change(void)
                                BACKLIGHT_UPDATE_HOTKEY);
 }
 
-static struct backlight_ops ibm_backlight_data = {
+static const struct backlight_ops ibm_backlight_data = {
         .get_brightness = brightness_get,
         .update_status  = brightness_update_status,
 };
@@ -7194,7 +7194,7 @@ static struct ibm_struct volume_driver_data = {
  *              TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
  *
  *      FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
- *      boot. Apparently the EC does not intialize it, so unless ACPI DSDT
+ *      boot. Apparently the EC does not initialize it, so unless ACPI DSDT
  *      does so, its initial value is meaningless (0x07).
  *
  *      For firmware bugs, refer to:
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 4276da7291b8..209cced786c6 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -841,7 +841,7 @@ static void remove_toshiba_proc_entries(void)
         remove_proc_entry("version", toshiba_proc_dir);
 }
 
-static struct backlight_ops toshiba_backlight_data = {
+static const struct backlight_ops toshiba_backlight_data = {
         .get_brightness = get_lcd,
         .update_status  = set_lcd_status,
 };
diff --git a/drivers/power/s3c_adc_battery.c b/drivers/power/s3c_adc_battery.c
index fe16b482e912..4a8ae3935b3b 100644
--- a/drivers/power/s3c_adc_battery.c
+++ b/drivers/power/s3c_adc_battery.c
@@ -1,5 +1,5 @@
 /*
- *      iPAQ h1930/h1940/rx1950 battery controler driver
+ *      iPAQ h1930/h1940/rx1950 battery controller driver
  *      Copyright (c) Vasily Khoruzhick
  *      Based on h1940_battery.c by Arnaud Patard
  *
@@ -427,5 +427,5 @@ static void __exit s3c_adc_bat_exit(void)
 module_exit(s3c_adc_bat_exit);
 
 MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
-MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver");
+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 09e7a053c844..30b2a820e670 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -841,7 +841,7 @@ lcs_notify_lancmd_waiters(struct lcs_card *card, struct lcs_cmd *cmd)
 }
 
 /**
- * Emit buffer of a lan comand.
+ * Emit buffer of a lan command.
  */
 static void
 lcs_lancmd_timeout(unsigned long data)
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index 46342fee394d..303dde09d294 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -317,7 +317,7 @@ static void zfcp_act_eval_err(struct zfcp_adapter *adapter, u32 table)
 
 /**
  * zfcp_cfdc_port_denied - Process "access denied" for port
- * @port: The port where the acces has been denied
+ * @port: The port where the access has been denied
  * @qual: The FSF status qualifier for the access denied FSF status
  */
 void zfcp_cfdc_port_denied(struct zfcp_port *port,
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dc5ac6e528c4..a391090a17c5 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host)
         /* Go back and check they match */
 
         outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL);     /* Reset program count 0 */
-        bios_addr -= 0x1000;    /* Reset the BIOS adddress      */
+        bios_addr -= 0x1000;    /* Reset the BIOS address */
         for (i = 0, data32_ptr = (u8 *) & data32;       /* Check the code       */
              i < 0x1000;        /* Firmware code size = 4K      */
              i++, bios_addr++) {
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index afc9aeba5edb..060ac4bd5a14 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev)
  *      aac_fib_setup   -       setup the fibs
  *      @dev: Adapter to set up
  *
- *      Allocate the PCI space for the fibs, map it and then intialise the
+ *      Allocate the PCI space for the fibs, map it and then initialise the
  *      fib area, the unmapped fib data and also the free list
  */
 
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 5997e7c3a191..1565be9ebd49 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -1178,7 +1178,7 @@ notFound:
 /*
  * Retrieve an SCB by SCBID first searching the disconnected list falling
  * back to DMA'ing the SCB down from the host.  This routine assumes that
- * ARG_1 is the SCBID of interrest and that SINDEX is the position in the
+ * ARG_1 is the SCBID of interest and that SINDEX is the position in the
  * disconnected list to start the search from.  If SINDEX is SCB_LIST_NULL,
  * we go directly to the host for the SCB.
  */
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 28aaf349c111..40273a747d29 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1689,7 +1689,7 @@
 #define         PHY_START_CAL           0x01
 
 /*
- * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
  */
 #define PCIX_REG_BASE_ADR               0xB8040000
 
@@ -1802,7 +1802,7 @@
 #define PCIC_TP_CTRL    0xFC
 
 /*
- * EXSI Registers, Addresss Range: (0x00-0xFC)
+ * EXSI Registers, Address Range: (0x00-0xFC)
  */
 #define EXSI_REG_BASE_ADR               REG_BASE_ADDR_EXSI
 
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index c43698b1cb64..29593275201a 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -867,7 +867,7 @@ void asd_build_initiate_link_adm_task(struct asd_ascb *ascb, int phy_id,
  * resources they have with this SCB, and then call this one at the
  * end of their timeout function.  To do this, one should initialize
  * the ascb->timer.{function, data, expires} prior to calling the post
- * funcion.  The timer is started by the post function.
+ * function. The timer is started by the post function.
  */
 void asd_ascb_timedout(unsigned long data)
 {
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 74374618010c..390168f62a13 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha,  int lseq)
                 int j;
                 /* Start from Page 1 of Mode 0 and 1. */
                 moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
-                /* All the fields of page 1 can be intialized to 0. */
+                /* All the fields of page 1 can be initialized to 0. */
                 for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
                         asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
         }
@@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
         asd_write_reg_dword(asd_ha, SCBPRO, 0);
         asd_write_reg_dword(asd_ha, CSEQCON, 0);
 
-        /* Intialize CSEQ Mode 11 Interrupt Vectors.
+        /* Initialize CSEQ Mode 11 Interrupt Vectors.
          * The addresses are 16 bit wide and in dword units.
          * The values of their macros are in byte units.
          * Thus we have to divide by 4. */
@@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha)
         asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
 
         for (i = 0; i < 8; i++) {
-                /* Intialize Mode n Link m Interrupt Enable. */
+                /* Initialize Mode n Link m Interrupt Enable. */
                 asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
                 /* Initialize Mode n Request Mailbox. */
                 asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 9c410b21db6d..c0353cdca929 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -1838,7 +1838,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 
         case BFA_IOIM_SM_ABORT:
                 /*
-                 * IO is alraedy being cleaned up implicitly
+                 * IO is already being cleaned up implicitly
                  */
                 ioim->io_cbfn = __bfa_cb_ioim_abort;
                 break;
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 4e2eb92ba028..43fa986bb586 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -5646,7 +5646,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
         switch (status) {
         case BFA_STATUS_OK:
                 /*
-                 * Initialiaze the V-Port fields
+                 * Initialize the V-Port fields
                  */
                 __vport_fcid(vport) = vport->lps->lp_pid;
                 vport->vport_stats.fdisc_accepts++;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 8f1b5c8bf903..b0f8523e665f 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3796,7 +3796,7 @@ static struct DeviceCtlBlk *device_alloc(struct AdapterCtlBlk *acb,
  * adapter_add_device - Adds the device instance to the adaptor instance.
  *
  * @acb: The adapter device to be updated
- * @dcb: A newly created and intialised device instance to add.
+ * @dcb: A newly created and initialised device instance to add.
  **/
 static void adapter_add_device(struct AdapterCtlBlk *acb,
                 struct DeviceCtlBlk *dcb)
@@ -4498,7 +4498,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb)
  * init_adapter - Grab the resource for the card, setup the adapter
  * information, set the card into a known state, create the various
  * tables etc etc. This basically gets all adapter information all up
- * to date, intialised and gets the chip in sync with it.
+ * to date, initialised and gets the chip in sync with it.
  *
  * @host:       This hosts adapter structure
  * @io_port:    The base I/O port
@@ -4789,7 +4789,7 @@ static void banner_display(void)
  * that it finds in the system. The pci_dev strcuture indicates which
  * instance we are being called from.
  * 
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
  * @id: Looks like a pointer to the entry in our pci device table
  * that was actually matched by the PCI subsystem.
  *
@@ -4860,7 +4860,7 @@ fail:
  * dc395x_remove_one - Called to remove a single instance of the
  * adapter.
  *
- * @dev: The PCI device to intialize.
+ * @dev: The PCI device to initialize.
  **/
 static void __devexit dc395x_remove_one(struct pci_dev *dev)
 {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index cdc06cda76e5..5962d1a5a674 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1250,7 +1250,7 @@ static void fc_lun_reset_send(unsigned long data)
 /**
  * fc_lun_reset() - Send a LUN RESET command to a device
  *                  and wait for the reply
- * @lport: The local port to sent the comand on
+ * @lport: The local port to sent the command on
  * @fsp:   The FCP packet that identifies the LUN to be reset
  * @id:    The SCSI command ID
  * @lun:   The LUN ID to be reset
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c06491b5862f..3512abb8a587 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1335,7 +1335,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
 }
 
 /**
- * lpfc_param_init - Intializes a cfg attribute
+ * lpfc_param_init - Initializes a cfg attribute
  *
  * Description:
  * Macro that given an attr e.g. hba_queue_depth expands
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index f9f160ab2ee9..bb015960dbc9 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -2852,7 +2852,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
                         if (unlikely(!fcf_record)) {
                                 lpfc_printf_log(phba, KERN_ERR,
                                         LOG_MBOX | LOG_SLI,
-                                        "2554 Could not allocate memmory for "
+                                        "2554 Could not allocate memory for "
                                         "fcf record\n");
                                 rc = -ENODEV;
                                 goto out;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 462242dcdd0a..6d0b36aa3389 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8071,7 +8071,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
          * the HBA.
          */
 
-        /* HBA interrupt will be diabled after this call */
+        /* HBA interrupt will be disabled after this call */
         lpfc_sli_hba_down(phba);
         /* Stop kthread signal shall trigger work_done one more time */
         kthread_stop(phba->worker_thread);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 634b2fea9c4d..a359d2b873ce 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -10172,7 +10172,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id)
  * lpfc_sli4_queue_free - free a queue structure and associated memory
  * @queue: The queue structure to free.
  *
- * This function frees a queue structure and the DMAable memeory used for
+ * This function frees a queue structure and the DMAable memory used for
  * the host resident queue. This function must be called after destroying the
  * queue on the HBA.
  **/
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index f5644745e24e..853411911b2e 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -13,7 +13,7 @@
  */
 
 /*
- * Comand coalescing - This feature allows the driver to be able to combine
+ * Command coalescing - This feature allows the driver to be able to combine
  * two or more commands and issue as one command in order to boost I/O
  * performance. Useful if the nature of the I/O is sequential. It is not very
  * useful for random natured I/Os.
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index a7008c0c24f9..25506c777381 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -224,7 +224,7 @@ mraid_mm_unlocked_ioctl(struct file *filep, unsigned int cmd,
 {
         int err;
 
-        /* inconsistant: mraid_mm_compat_ioctl doesn't take the BKL */
+        /* inconsistent: mraid_mm_compat_ioctl doesn't take the BKL */
         mutex_lock(&mraid_mm_mutex);
         err = mraid_mm_ioctl(filep, cmd, arg);
         mutex_unlock(&mraid_mm_mutex);
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index f8c86b28f03f..b95285f3383f 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 #endif
 
 intx:
-        /* intialize the INT-X interrupt */
+        /* initialize the INT-X interrupt */
         rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
                 SHOST_TO_SAS_HA(pm8001_ha->shost));
         return rc;
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index d53e6503c6d5..a2ed201885ae 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver);
 
 
 /**
- * scsi_netlink_init - Called by SCSI subsystem to intialize
+ * scsi_netlink_init - Called by SCSI subsystem to initialize
  *      the SCSI transport netlink interface
  *
  **/
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 4c68d36f9ac2..490ce213204e 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -864,13 +864,15 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 
         error = device_add(&sdev->sdev_gendev);
         if (error) {
-                printk(KERN_INFO "error 1\n");
+                sdev_printk(KERN_INFO, sdev,
+                                "failed to add device: %d\n", error);
                 return error;
         }
         device_enable_async_suspend(&sdev->sdev_dev);
         error = device_add(&sdev->sdev_dev);
         if (error) {
-                printk(KERN_INFO "error 2\n");
+                sdev_printk(KERN_INFO, sdev,
+                                "failed to add class device: %d\n", error);
                 device_del(&sdev->sdev_gendev);
                 return error;
         }
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 6b97ded9d45d..b4543f575f46 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1866,7 +1866,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev)
  *
  * This routine is similar to sym_set_workarounds(), except
  * that, at this point, we already know that the device was
- * successfully intialized at least once before, and so most
+ * successfully initialized at least once before, and so most
  * of the steps taken there are un-needed here.
  */
 static void sym2_reset_workarounds(struct pci_dev *pdev)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index a067046c9da2..1a478bf88c9d 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -341,9 +341,9 @@ static void atmel_spi_next_message(struct spi_master *master)
 /*
  * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
  *  - The buffer is either valid for CPU access, else NULL
- *  - If the buffer is valid, so is its DMA addresss
+ *  - If the buffer is valid, so is its DMA address
  *
- * This driver manages the dma addresss unless message->is_dma_mapped.
+ * This driver manages the dma address unless message->is_dma_mapped.
  */
 static int
 atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 4e6245e67995..603428213d21 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -38,7 +38,7 @@
 
 
 /*
- * This supports acccess to SPI devices using normal userspace I/O calls.
+ * This supports access to SPI devices using normal userspace I/O calls.
  * Note that while traditional UNIX/POSIX I/O semantics are half duplex,
  * and often mask message boundaries, full SPI support requires full duplex
  * transfers.  There are several kinds of internal message boundaries to
diff --git a/drivers/staging/msm/msm_fb_bl.c b/drivers/staging/msm/msm_fb_bl.c
index 033fc9486e01..2a8077511fc0 100644
--- a/drivers/staging/msm/msm_fb_bl.c
+++ b/drivers/staging/msm/msm_fb_bl.c
@@ -42,7 +42,7 @@ static int msm_fb_bl_update_status(struct backlight_device *pbd)
         return 0;
 }
 
-static struct backlight_ops msm_fb_bl_ops = {
+static const struct backlight_ops msm_fb_bl_ops = {
         .get_brightness = msm_fb_bl_get_brightness,
         .update_status = msm_fb_bl_update_status,
 };
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index da040c12fbf9..9f26dc9408bb 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -614,7 +614,7 @@ static struct device_attribute dcon_device_files[] = {
         __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store),
 };
 
-static struct backlight_ops dcon_bl_ops = {
+static const struct backlight_ops dcon_bl_ops = {
         .get_brightness = dconbl_get,
         .update_status = dconbl_set
 };
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
index ac2bf11e1119..701e8d52a9fa 100644
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ b/drivers/staging/samsung-laptop/samsung-laptop.c
@@ -269,7 +269,7 @@ static int update_status(struct backlight_device *bd)
         return 0;
 }
 
-static struct backlight_ops backlight_ops = {
+static const struct backlight_ops backlight_ops = {
         .get_brightness = get_brightness,
         .update_status  = update_status,
 };
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index c4bc8d5a9d18..b00101972f20 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -6580,7 +6580,8 @@ static long do_ixj_ioctl(struct file *file_p, unsigned int cmd, unsigned long ar
         case IXJCTL_SET_FILTER:
                 if (copy_from_user(&jf, argp, sizeof(jf))) 
                         retval = -EFAULT;
-                retval = ixj_init_filter(j, &jf);
+                else
+                        retval = ixj_init_filter(j, &jf);
                 break;
         case IXJCTL_SET_FILTER_RAW:
                 if (copy_from_user(&jfr, argp, sizeof(jfr))) 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 1210534822d6..5408186afc35 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1320,7 +1320,7 @@ static struct imx_udc_struct controller = {
 };
 
 /*******************************************************************************
- * USB gadged driver functions
+ * USB gadget driver functions
  *******************************************************************************
  */
 int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 777972454e3e..1eca8b47ce3c 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -3086,7 +3086,7 @@ static void langwell_udc_remove(struct pci_dev *pdev)
 
         kfree(dev->ep);
 
-        /* diable IRQ handler */
+        /* disable IRQ handler */
         if (dev->got_irq)
                 free_irq(pdev->irq, dev);
 
@@ -3406,7 +3406,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state)
         /* disable interrupt and set controller to stop state */
         langwell_udc_stop(dev);
 
-        /* diable IRQ handler */
+        /* disable IRQ handler */
         if (dev->got_irq)
                 free_irq(pdev->irq, dev);
         dev->got_irq = 0;
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 20092a27a1e8..12fd184226f2 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -98,13 +98,13 @@ void fhci_usb_enable_interrupt(struct fhci_usb *usb)
         usb->intr_nesting_cnt--;
 }
 
-/* diable the usb interrupt */
+/* disable the usb interrupt */
 void fhci_usb_disable_interrupt(struct fhci_usb *usb)
 {
         struct fhci_hcd *fhci = usb->fhci;
 
         if (usb->intr_nesting_cnt == 0) {
-                /* diable the timer interrupt */
+                /* disable the timer interrupt */
                 disable_irq_nosync(fhci->timer->irq);
 
                 /* disable the usb interrupt */
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 7be548ca2183..38fe058fbe61 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -271,8 +271,8 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
 
 /*
  * Collect the submitted frames and inform the application about them
- * It is also prepearing the TDs for new frames. If the Tx interrupts
- * are diabled, the application should call that routine to get
+ * It is also preparing the TDs for new frames. If the Tx interrupts
+ * are disabled, the application should call that routine to get
  * confirmation about the submitted frames. Otherwise, the routine is
  * called frome the interrupt service routine during the Tx interrupt.
  * In that case the application is informed by calling the application
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index e49b75a78000..f90d003f2302 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1658,7 +1658,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
 
         spin_lock_irqsave(&imx21->lock, flags);
 
-        /* Reset the Host controler modules */
+        /* Reset the Host controller modules */
         writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
                 USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
                 imx21->regs + USBOTG_RST_CTRL);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 32149be4ad8e..e0cb12b573f9 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3094,7 +3094,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
 
         /* Some boards (mostly VIA?) report bogus overcurrent indications,
          * causing massive log spam unless we completely ignore them.  It
-         * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+         * may be relevant that VIA VT8235 controllers, where PORT_POWER is
          * always set, seem to clear PORT_OCC and PORT_CSC when writing to
          * PORT_POWER; that's surprising, but maybe within-spec.
          */
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 44f8b9225054..a6afd15f6a46 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface,
                 goto exit;
         }
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
         dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
         if (dev == NULL) {
                 dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index c9078e4e1f4d..e573e4704015 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -769,7 +769,7 @@ static int iowarrior_probe(struct usb_interface *interface,
         int i;
         int retval = -ENOMEM;
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
         dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
         if (dev == NULL) {
                 dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index edffef642337..eefb8275bb7e 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
         int i;
         int retval = -ENOMEM;
 
-        /* allocate memory for our device state and intialize it */
+        /* allocate memory for our device state and initialize it */
 
         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
         if (dev == NULL) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 9b162dfaa4fb..ed58c6c8f15c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1684,7 +1684,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb)
         struct musb_hw_ep       *hw_ep;
         unsigned                count = 0;
 
-        /* intialize endpoint list just once */
+        /* initialize endpoint list just once */
         INIT_LIST_HEAD(&(musb->g.ep_list));
 
         for (epnum = 0, hw_ep = musb->endpoints;
@@ -1765,7 +1765,7 @@ void musb_gadget_cleanup(struct musb *musb)
  *
  * -EINVAL something went wrong (not driver)
  * -EBUSY another gadget is already using the controller
- * -ENOMEM no memeory to perform the operation
+ * -ENOMEM no memory to perform the operation
  *
  * @param driver the gadget driver
  * @param bind the driver's bind function
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7b1d8108de9..8cb9d80207fa 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -49,7 +49,7 @@
  *
  *  USB Stack port number    4 (1 based)
  *  WUSB code port index     3 (0 based)
- *  USB Addresss             5 (2 based -- 0 is for default, 1 for root hub)
+ *  USB Address             5 (2 based -- 0 is for default, 1 for root hub)
  *
  *  Now, because we don't use the concept as default address exactly
  *  like the (wired) USB code does, we need to kind of skip it. So we
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 8dce25126330..bac163450216 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -111,7 +111,7 @@ static int atmel_bl_get_brightness(struct backlight_device *bl)
         return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
 }
 
-static struct backlight_ops atmel_lcdc_bl_ops = {
+static const struct backlight_ops atmel_lcdc_bl_ops = {
         .update_status = atmel_bl_update_status,
         .get_brightness = atmel_bl_get_brightness,
 };
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 34a0851bcbfa..dd9de2e80580 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1786,7 +1786,7 @@ static int aty128_bl_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops aty128_bl_data = {
+static const struct backlight_ops aty128_bl_data = {
         .get_brightness = aty128_bl_get_brightness,
         .update_status  = aty128_bl_update_status,
 };
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 5a3ce3ad1ec8..767ab4fb1a05 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2221,7 +2221,7 @@ static int aty_bl_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops aty_bl_data = {
+static const struct backlight_ops aty_bl_data = {
         .get_brightness = aty_bl_get_brightness,
         .update_status  = aty_bl_update_status,
 };
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c
index 256966e9667d..9b811ddbce83 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/aty/radeon_backlight.c
@@ -128,7 +128,7 @@ static int radeon_bl_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops radeon_bl_data = {
+static const struct backlight_ops radeon_bl_data = {
         .get_brightness = radeon_bl_get_brightness,
         .update_status  = radeon_bl_update_status,
 };
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c
index 38ffc3fbcbe4..c789c46e38af 100644
--- a/drivers/video/backlight/88pm860x_bl.c
+++ b/drivers/video/backlight/88pm860x_bl.c
@@ -155,7 +155,7 @@ out:
         return -EINVAL;
 }
 
-static struct backlight_ops pm860x_backlight_ops = {
+static const struct backlight_ops pm860x_backlight_ops = {
         .options        = BL_CORE_SUSPENDRESUME,
         .update_status  = pm860x_backlight_update_status,
         .get_brightness = pm860x_backlight_get_brightness,
diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c
index b2b2c7ba1f63..209acc105cbc 100644
--- a/drivers/video/backlight/max8925_bl.c
+++ b/drivers/video/backlight/max8925_bl.c
@@ -92,7 +92,7 @@ static int max8925_backlight_get_brightness(struct backlight_device *bl)
         return ret;
 }
 
-static struct backlight_ops max8925_backlight_ops = {
+static const struct backlight_ops max8925_backlight_ops = {
         .options        = BL_CORE_SUSPENDRESUME,
         .update_status  = max8925_backlight_update_status,
         .get_brightness = max8925_backlight_get_brightness,
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/nvidia/nv_backlight.c
index 2fb552a6f32c..6aac6d1b937b 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/nvidia/nv_backlight.c
@@ -87,7 +87,7 @@ static int nvidia_bl_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops nvidia_bl_ops = {
+static const struct backlight_ops nvidia_bl_ops = {
         .get_brightness = nvidia_bl_get_brightness,
         .update_status  = nvidia_bl_update_status,
 };
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index e1c765d11419..61026f96ad20 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -465,7 +465,7 @@ static int taal_bl_get_intensity(struct backlight_device *dev)
         return 0;
 }
 
-static struct backlight_ops taal_bl_ops = {
+static const struct backlight_ops taal_bl_ops = {
         .get_brightness = taal_bl_get_intensity,
         .update_status  = taal_bl_update_status,
 };
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/riva/fbdev.c
index 618f36bec10d..da388186d617 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/riva/fbdev.c
@@ -331,7 +331,7 @@ static int riva_bl_get_brightness(struct backlight_device *bd)
         return bd->props.brightness;
 }
 
-static struct backlight_ops riva_bl_ops = {
+static const struct backlight_ops riva_bl_ops = {
         .get_brightness = riva_bl_get_brightness,
         .update_status  = riva_bl_update_status,
 };
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index dee64c3b1e67..2ab704118c44 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -536,7 +536,7 @@ static int sstfb_set_par(struct fb_info *info)
         fbiinit2 = sst_read(FBIINIT2);
         fbiinit3 = sst_read(FBIINIT3);
 
-        /* everything is reset. we enable fbiinit2/3 remap : dac acces ok */
+        /* everything is reset. we enable fbiinit2/3 remap : dac access ok */
         pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
                                PCI_EN_INIT_WR | PCI_REMAP_DAC );
 
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 5fd38112a6ca..98edb657b84d 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -64,9 +64,9 @@ static const struct address_space_operations anon_aops = {
 };
 
 /**
- * anon_inode_getfd - creates a new file instance by hooking it up to an
- *                    anonymous inode, and a dentry that describe the "class"
- *                    of the file
+ * anon_inode_getfile - creates a new file instance by hooking it up to an
+ *                      anonymous inode, and a dentry that describe the "class"
+ *                      of the file
  *
  * @name:    [in]    name of the "class" of the new file
  * @fops:    [in]    file operations for the new file
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 50dc7d189f56..f065a5d31a19 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -45,7 +45,7 @@ static struct kmem_cache * coda_inode_cachep;
 static struct inode *coda_alloc_inode(struct super_block *sb)
 {
         struct coda_inode_info *ei;
-        ei = (struct coda_inode_info *)kmem_cache_alloc(coda_inode_cachep, GFP_KERNEL);
+        ei = kmem_cache_alloc(coda_inode_cachep, GFP_KERNEL);
         if (!ei)
                 return NULL;
         memset(&ei->c_fid, 0, sizeof(struct CodaFid));
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index bab2387fba43..1de65f572033 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -561,7 +561,7 @@ struct ext4_new_group_data {
 #define EXT4_IOC32_SETVERSION_OLD       FS_IOC32_SETVERSION
 #endif
 
-/* Max physical block we can addres w/o extents */
+/* Max physical block we can address w/o extents */
 #define EXT4_MAX_BLOCK_FILE_PHYS        0xFFFFFFFF
 
 /*
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e910720e8bb8..d202d765dad2 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2845,14 +2845,14 @@ fix_extent_len:
  * to an uninitialized extent.
  *
  * Writing to an uninitized extent may result in splitting the uninitialized
- * extent into multiple /intialized unintialized extents (up to three)
+ * extent into multiple /initialized uninitialized extents (up to three)
  * There are three possibilities:
  *   a> There is no split required: Entire extent should be uninitialized
  *   b> Splits in two extents: Write is happening at either end of the extent
  *   c> Splits in three extents: Somone is writing in middle of the extent
  *
  * One of more index blocks maybe needed if the extent tree grow after
- * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * the uninitialized extent split. To prevent ENOSPC occur at the IO
  * complete, we need to split the uninitialized extent before DIO submit
  * the IO. The uninitialized extent called at this time will be split
  * into three uninitialized extent(at most). After IO complete, the part
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 549465fef7e9..9f7f9e49914f 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3380,7 +3380,7 @@ int ext4_alloc_da_blocks(struct inode *inode)
          * doing I/O at all.
          *
          * We could call write_cache_pages(), and then redirty all of
-         * the pages by calling redirty_page_for_writeback() but that
+         * the pages by calling redirty_page_for_writepage() but that
          * would be ugly in the extreme.  So instead we would need to
          * replicate parts of the code in the above functions,
          * simplifying them becuase we wouldn't actually intend to
@@ -3762,9 +3762,9 @@ retry:
  * preallocated extents, and those write extend the file, no need to
  * fall back to buffered IO.
  *
- * For holes, we fallocate those blocks, mark them as unintialized
+ * For holes, we fallocate those blocks, mark them as uninitialized
  * If those blocks were preallocated, we mark sure they are splited, but
- * still keep the range to write as unintialized.
+ * still keep the range to write as uninitialized.
  *
  * The unwrritten extents will be converted to written when DIO is completed.
  * For async direct IO, since the IO may still pending when return, we
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 846a3f314111..5b2e4c30a2a1 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -207,7 +207,7 @@ repeat_locked:
          * the committing transaction.  Really, we only need to give it
          * committing_transaction->t_outstanding_credits plus "enough" for
          * the log control blocks.
-         * Also, this test is inconsitent with the matching one in
+         * Also, this test is inconsistent with the matching one in
          * journal_extend().
          */
         if (__log_space_left(journal) < jbd_space_needed(journal)) {
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 394893242ae3..faad2bd787c7 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -251,7 +251,7 @@ repeat:
          * the committing transaction.  Really, we only need to give it
          * committing_transaction->t_outstanding_credits plus "enough" for
          * the log control blocks.
-         * Also, this test is inconsitent with the matching one in
+         * Also, this test is inconsistent with the matching one in
          * jbd2_journal_extend().
          */
         if (__jbd2_log_space_left(journal) < jbd_space_needed(journal)) {
diff --git a/fs/notify/fanotify/Kconfig b/fs/notify/fanotify/Kconfig
index 3ac36b7bf6b9..7dceff005a67 100644
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
@@ -6,7 +6,7 @@ config FANOTIFY
         ---help---
            Say Y here to enable fanotify suport.  fanotify is a file access
            notification system which differs from inotify in that it sends
-           and open file descriptor to the userspace listener along with
+           an open file descriptor to the userspace listener along with
            the event.
 
            If unsure, say Y.
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index f935fd6600dd..4068c6c4c6f6 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -434,7 +434,7 @@ static int ocfs2_read_locked_inode(struct inode *inode,
          * #1 and #2 can be simply solved by never taking the lock
          * here for system files (which are the only type we read
          * during mount). It's a heavier approach, but our main
-         * concern is user-accesible files anyway.
+         * concern is user-accessible files anyway.
          *
          * #3 works itself out because we'll eventually take the
          * cluster lock before trusting anything anyway.
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index 5fed60de7630..71998d4d61d5 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -1916,7 +1916,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
         if (res->sr_bg_blkno) {
                 /* Attempt to short-circuit the usual search mechanism
                  * by jumping straight to the most recently used
-                 * allocation group. This helps us mantain some
+                 * allocation group. This helps us maintain some
                  * contiguousness across allocations. */
                 status = ocfs2_search_one_group(ac, handle, bits_wanted,
                                                 min_bits, res, &bits_left);
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index c51faaa5e291..a10f6416e563 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -947,7 +947,7 @@ out_reclaim:
  * Slab object creation initialisation for the XFS inode.
  * This covers only the idempotent fields in the XFS inode;
  * all other fields need to be initialised on allocation
- * from the slab. This avoids the need to repeatedly intialise
+ * from the slab. This avoids the need to repeatedly initialise
  * fields in the xfs inode that left in the initialise state
  * when freeing the inode.
  */
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index c637b75b9f3f..cd77aa75c962 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -119,7 +119,7 @@ struct acpi_whea_header {
 struct acpi_table_bert {
         struct acpi_table_header header;        /* Common ACPI table header */
         u32 region_length;      /* Length of the boot error region */
-        u64 address;            /* Physical addresss of the error region */
+        u64 address;            /* Physical address of the error region */
 };
 
 /* Boot Error Region (not a subtable, pointed to by Address field above) */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index ed4ba111bc8d..ce104e33cd22 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -564,7 +564,7 @@ struct cgroup_iter {
 /*
  * To iterate across the tasks in a cgroup:
  *
- * 1) call cgroup_iter_start to intialize an iterator
+ * 1) call cgroup_iter_start to initialize an iterator
  *
  * 2) call cgroup_iter_next() to retrieve member tasks until it
  *    returns NULL or until you want to end the iteration
diff --git a/include/linux/firewire-cdev.h b/include/linux/firewire-cdev.h
index 68c642d8843d..59ea406be7f6 100644
--- a/include/linux/firewire-cdev.h
+++ b/include/linux/firewire-cdev.h
@@ -273,7 +273,7 @@ struct fw_cdev_event_iso_interrupt {
  * @closure:    See &fw_cdev_event_common;
  *              set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
  * @type:       %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
- * @completed:  Offset into the receive buffer; data before this offest is valid
+ * @completed:  Offset into the receive buffer; data before this offset is valid
  *
  * This event is sent in multichannel contexts (context type
  * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index cb93d80aa642..5582ab3d3e48 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -39,7 +39,7 @@ struct mfd_cell {
         size_t                  data_size;
 
         /*
-         * This resources can be specified relatievly to the parent device.
+         * This resources can be specified relatively to the parent device.
          * For accessing device you should use resources from device
          */
         int                     num_resources;
diff --git a/include/linux/poll.h b/include/linux/poll.h
index 56e76af78102..1a2ccd6f3823 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -57,7 +57,7 @@ struct poll_table_entry {
 };
 
 /*
- * Structures and helpers for sys_poll/sys_poll
+ * Structures and helpers for select/poll syscall
  */
 struct poll_wqueues {
         poll_table pt;
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 144b34be5c32..c1f499835b2a 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -122,7 +122,7 @@ struct platform_suspend_ops {
  * suspend_set_ops - set platform dependent suspend operations
  * @ops: The new suspend operations to set.
  */
-extern void suspend_set_ops(struct platform_suspend_ops *ops);
+extern void suspend_set_ops(const struct platform_suspend_ops *ops);
 extern int suspend_valid_only_mem(suspend_state_t state);
 
 /**
@@ -147,7 +147,7 @@ extern int pm_suspend(suspend_state_t state);
 #else /* !CONFIG_SUSPEND */
 #define suspend_valid_only_mem  NULL
 
-static inline void suspend_set_ops(struct platform_suspend_ops *ops) {}
+static inline void suspend_set_ops(const struct platform_suspend_ops *ops) {}
 static inline int pm_suspend(suspend_state_t state) { return -ENOSYS; }
 #endif /* !CONFIG_SUSPEND */
 
@@ -245,7 +245,7 @@ extern void swsusp_set_page_free(struct page *);
 extern void swsusp_unset_page_free(struct page *);
 extern unsigned long get_safe_page(gfp_t gfp_mask);
 
-extern void hibernation_set_ops(struct platform_hibernation_ops *ops);
+extern void hibernation_set_ops(const struct platform_hibernation_ops *ops);
 extern int hibernate(void);
 extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
@@ -253,7 +253,7 @@ static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
 static inline void swsusp_unset_page_free(struct page *p) {}
 
-static inline void hibernation_set_ops(struct platform_hibernation_ops *ops) {}
+static inline void hibernation_set_ops(const struct platform_hibernation_ops *ops) {}
 static inline int hibernate(void) { return -ENOSYS; }
 static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
diff --git a/include/linux/u64_stats_sync.h b/include/linux/u64_stats_sync.h
index fa261a0da280..8da8c4e87da3 100644
--- a/include/linux/u64_stats_sync.h
+++ b/include/linux/u64_stats_sync.h
@@ -67,21 +67,21 @@ struct u64_stats_sync {
 #endif
 };
 
-static void inline u64_stats_update_begin(struct u64_stats_sync *syncp)
+static inline void u64_stats_update_begin(struct u64_stats_sync *syncp)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
         write_seqcount_begin(&syncp->seq);
 #endif
 }
 
-static void inline u64_stats_update_end(struct u64_stats_sync *syncp)
+static inline void u64_stats_update_end(struct u64_stats_sync *syncp)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
         write_seqcount_end(&syncp->seq);
 #endif
 }
 
-static unsigned int inline u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
+static inline unsigned int u64_stats_fetch_begin(const struct u64_stats_sync *syncp)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
         return read_seqcount_begin(&syncp->seq);
@@ -93,7 +93,7 @@ static unsigned int inline u64_stats_fetch_begin(const struct u64_stats_sync *sy
 #endif
 }
 
-static bool inline u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
+static inline bool u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
                                          unsigned int start)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
@@ -112,7 +112,7 @@ static bool inline u64_stats_fetch_retry(const struct u64_stats_sync *syncp,
  * - UP 32bit must disable BH.
  * - 64bit have no problem atomically reading u64 values, irq safe.
  */
-static unsigned int inline u64_stats_fetch_begin_bh(const struct u64_stats_sync *syncp)
+static inline unsigned int u64_stats_fetch_begin_bh(const struct u64_stats_sync *syncp)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
         return read_seqcount_begin(&syncp->seq);
@@ -124,7 +124,7 @@ static unsigned int inline u64_stats_fetch_begin_bh(const struct u64_stats_sync
 #endif
 }
 
-static bool inline u64_stats_fetch_retry_bh(const struct u64_stats_sync *syncp,
+static inline bool u64_stats_fetch_retry_bh(const struct u64_stats_sync *syncp,
                                          unsigned int start)
 {
 #if BITS_PER_LONG==32 && defined(CONFIG_SMP)
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
index c59cc029c74a..b586495bcd53 100644
--- a/include/media/davinci/vpss.h
+++ b/include/media/davinci/vpss.h
@@ -44,7 +44,7 @@ struct vpss_pg_frame_size {
         short pplen;
 };
 
-/* Used for enable/diable VPSS Clock */
+/* Used for enable/disable VPSS Clock */
 enum vpss_clock_sel {
         /* DM355/DM365 */
         VPSS_CCDC_CLOCK,
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index 2b2769c5ca9f..2a128c8c2718 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -99,8 +99,8 @@ typedef __s32 sctp_assoc_t;
 #define SCTP_SOCKOPT_PEELOFF    102     /* peel off association. */
 /* Options 104-106 are deprecated and removed. Do not use this space */
 #define SCTP_SOCKOPT_CONNECTX_OLD       107     /* CONNECTX old requests. */
-#define SCTP_GET_PEER_ADDRS     108             /* Get all peer addresss. */
-#define SCTP_GET_LOCAL_ADDRS    109             /* Get all local addresss. */
+#define SCTP_GET_PEER_ADDRS     108             /* Get all peer address. */
+#define SCTP_GET_LOCAL_ADDRS    109             /* Get all local address. */
 #define SCTP_SOCKOPT_CONNECTX   110             /* CONNECTX requests. */
 #define SCTP_SOCKOPT_CONNECTX3  111     /* CONNECTX requests (updated) */
 
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
index 8e9b222251c2..8a143ca79878 100644
--- a/include/scsi/fc/fc_fcp.h
+++ b/include/scsi/fc/fc_fcp.h
@@ -46,7 +46,7 @@
  */
 struct fcp_cmnd {
         __u8            fc_lun[8];      /* logical unit number */
-        __u8            fc_cmdref;      /* commmand reference number */
+        __u8            fc_cmdref;      /* command reference number */
         __u8            fc_pri_ta;      /* priority and task attribute */
         __u8            fc_tm_flags;    /* task management flags */
         __u8            fc_flags;       /* additional len & flags */
@@ -58,7 +58,7 @@ struct fcp_cmnd {
 
 struct fcp_cmnd32 {
         __u8            fc_lun[8];      /* logical unit number */
-        __u8            fc_cmdref;      /* commmand reference number */
+        __u8            fc_cmdref;      /* command reference number */
         __u8            fc_pri_ta;      /* priority and task attribute */
         __u8            fc_tm_flags;    /* task management flags */
         __u8            fc_flags;       /* additional len & flags */
diff --git a/init/Kconfig b/init/Kconfig
index ea176e8edbdd..4f6cdbf523eb 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -691,7 +691,7 @@ config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
         help
           Memory Resource Controller Swap Extension comes with its price in
           a bigger memory consumption. General purpose distribution kernels
-          which want to enable the feautre but keep it disabled by default
+          which want to enable the feature but keep it disabled by default
           and let the user enable it by swapaccount boot command line
           parameter should have this option unselected.
           For those who want to have the feature enabled by default should
diff --git a/kernel/audit.c b/kernel/audit.c
index 77770a034d59..e4956244ae50 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -400,7 +400,7 @@ static void kauditd_send_skb(struct sk_buff *skb)
         if (err < 0) {
                 BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */
                 printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid);
-                audit_log_lost("auditd dissapeared\n");
+                audit_log_lost("auditd disappeared\n");
                 audit_pid = 0;
                 /* we might get lucky and get this in the next auditd */
                 audit_hold_skb(skb);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index a6e729766821..bd3e8e29caa3 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2914,7 +2914,7 @@ static void __init kdb_cmd_init(void)
         }
 }
 
-/* Intialize kdb_printf, breakpoint tables and kdb state */
+/* Initialize kdb_printf, breakpoint tables and kdb state */
 void __init kdb_init(int lvl)
 {
         static int kdb_init_lvl = KDB_NOT_INITIALIZED;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 45da2b6920ab..0c8d7c048615 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1745,7 +1745,7 @@ schedule_hrtimeout_range_clock(ktime_t *expires, unsigned long delta,
         }
 
         /*
-         * A NULL parameter means "inifinte"
+         * A NULL parameter means "infinite"
          */
         if (!expires) {
                 schedule();
diff --git a/kernel/kexec.c b/kernel/kexec.c
index b55045bc7563..ec19b92c7ebd 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -163,7 +163,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry,
          * just verifies it is an address we can use.
          *
          * Since the kernel does everything in page size chunks ensure
-         * the destination addreses are page aligned.  Too many
+         * the destination addresses are page aligned.  Too many
          * special cases crop of when we don't do this.  The most
          * insidious is getting overlapping destination addresses
          * simply because addresses are changed to page size
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index b782b7a79f00..05ebe841270b 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -4664,7 +4664,7 @@ int perf_swevent_get_recursion_context(void)
 }
 EXPORT_SYMBOL_GPL(perf_swevent_get_recursion_context);
 
-void inline perf_swevent_put_recursion_context(int rctx)
+inline void perf_swevent_put_recursion_context(int rctx)
 {
         struct swevent_htable *swhash = &__get_cpu_var(swevent_htable);
 
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 870f72bc72ae..1832bd264219 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -51,14 +51,14 @@ enum {
 
 static int hibernation_mode = HIBERNATION_SHUTDOWN;
 
-static struct platform_hibernation_ops *hibernation_ops;
+static const struct platform_hibernation_ops *hibernation_ops;
 
 /**
  * hibernation_set_ops - set the global hibernate operations
  * @ops: the hibernation operations to use in subsequent hibernation transitions
  */
 
-void hibernation_set_ops(struct platform_hibernation_ops *ops)
+void hibernation_set_ops(const struct platform_hibernation_ops *ops)
 {
         if (ops && !(ops->begin && ops->end &&  ops->pre_snapshot
             && ops->prepare && ops->finish && ops->enter && ops->pre_restore
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 8850df68794d..de6f86bfa303 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -31,13 +31,13 @@ const char *const pm_states[PM_SUSPEND_MAX] = {
         [PM_SUSPEND_MEM]        = "mem",
 };
 
-static struct platform_suspend_ops *suspend_ops;
+static const struct platform_suspend_ops *suspend_ops;
 
 /**
  *      suspend_set_ops - Set the global suspend method table.
  *      @ops:   Pointer to ops structure.
  */
-void suspend_set_ops(struct platform_suspend_ops *ops)
+void suspend_set_ops(const struct platform_suspend_ops *ops)
 {
         mutex_lock(&pm_mutex);
         suspend_ops = ops;
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 8c7e4832b9be..69425889bd40 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -888,7 +888,7 @@ out_finish:
 /**
  *      swsusp_read - read the hibernation image.
  *      @flags_p: flags passed by the "frozen" kernel in the image header should
- *                be written into this memeory location
+ *                be written into this memory location
  */
 
 int swsusp_read(unsigned int *flags_p)
diff --git a/kernel/sched.c b/kernel/sched.c
index a0eb0941fa84..ea3e5eff3878 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -2505,7 +2505,7 @@ out:
  * try_to_wake_up_local - try to wake up a local task with rq lock held
  * @p: the thread to be awakened
  *
- * Put @p on the run-queue if it's not alredy there.  The caller must
+ * Put @p on the run-queue if it's not already there.  The caller must
  * ensure that this_rq() is locked, @p is bound to this_rq() and not
  * the current task.  this_rq() stays locked over invocation.
  */
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 4b2545a136ff..b875bedf7c9a 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1192,7 +1192,7 @@ static ssize_t bin_dn_node_address(struct file *file,
 
                 buf[result] = '\0';
 
-                /* Convert the decnet addresss to binary */
+                /* Convert the decnet address to binary */
                 result = -EIO;
                 nodep = strchr(buf, '.') + 1;
                 if (!nodep)
diff --git a/kernel/time.c b/kernel/time.c
index ba9b338d1835..32174359576f 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -238,7 +238,7 @@ EXPORT_SYMBOL(current_fs_time);
  * Avoid unnecessary multiplications/divisions in the
  * two most common HZ cases:
  */
-unsigned int inline jiffies_to_msecs(const unsigned long j)
+inline unsigned int jiffies_to_msecs(const unsigned long j)
 {
 #if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
         return (MSEC_PER_SEC / HZ) * j;
@@ -254,7 +254,7 @@ unsigned int inline jiffies_to_msecs(const unsigned long j)
 }
 EXPORT_SYMBOL(jiffies_to_msecs);
 
-unsigned int inline jiffies_to_usecs(const unsigned long j)
+inline unsigned int jiffies_to_usecs(const unsigned long j)
 {
 #if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
         return (USEC_PER_SEC / HZ) * j;
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index df140cd3ea47..c50a034de30f 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -679,7 +679,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
 int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
 
-        /* Intialize mult/shift and max_idle_ns */
+        /* Initialize mult/shift and max_idle_ns */
         __clocksource_updatefreq_scale(cs, scale, freq);
 
         /* Add clocksource to the clcoksource list */
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index e3dfecaf13e6..6cf223764be8 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -53,7 +53,7 @@
  */
 
 /*
- * Function trace entry - function address and parent function addres:
+ * Function trace entry - function address and parent function address:
  */
 FTRACE_ENTRY(function, ftrace_entry,
 
diff --git a/lib/nlattr.c b/lib/nlattr.c
index 00e8a02681a6..5021cbc34411 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -167,7 +167,7 @@ nla_policy_len(const struct nla_policy *p, int n)
  * @policy: validation policy
  *
  * Parses a stream of attributes and stores a pointer to each attribute in
- * the tb array accessable via the attribute type. Attributes with a type
+ * the tb array accessible via the attribute type. Attributes with a type
  * exceeding maxtype will be silently ignored for backwards compatibility
  * reasons. policy may be set to NULL if no validation is required.
  *
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 7c06ee51a29a..c47bbe11b804 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -60,7 +60,7 @@ int swiotlb_force;
 static char *io_tlb_start, *io_tlb_end;
 
 /*
- * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and
+ * The number of IO TLB blocks (in groups of 64) between io_tlb_start and
  * io_tlb_end.  This is command line adjustable via setup_io_tlb_npages.
  */
 static unsigned long io_tlb_nslabs;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b4edfe7ce06c..b5d8a1f820a0 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -404,7 +404,7 @@ unsigned long determine_dirtyable_memory(void)
  * - vm.dirty_background_ratio  or  vm.dirty_background_bytes
  * - vm.dirty_ratio             or  vm.dirty_bytes
  * The dirty limits will be lifted by 1/4 for PF_LESS_THROTTLE (ie. nfsd) and
- * runtime tasks.
+ * real-time tasks.
  */
 void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty)
 {
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index ff7e15872398..826ba6922e84 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4014,7 +4014,7 @@ static void __init setup_usemap(struct pglist_data *pgdat,
                 zone->pageblock_flags = alloc_bootmem_node(pgdat, usemapsize);
 }
 #else
-static void inline setup_usemap(struct pglist_data *pgdat,
+static inline void setup_usemap(struct pglist_data *pgdat,
                                 struct zone *zone, unsigned long zonesize) {}
 #endif /* CONFIG_SPARSEMEM */
 
diff --git a/mm/percpu.c b/mm/percpu.c
index 3dd4984bdef8..3f930018aa60 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -258,7 +258,7 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk,
 
 /*
  * (Un)populated page region iterators.  Iterate over (un)populated
- * page regions betwen @start and @end in @chunk.  @rs and @re should
+ * page regions between @start and @end in @chunk.  @rs and @re should
  * be integer variables and will be set to start and end page index of
  * the current region.
  */
diff --git a/mm/rmap.c b/mm/rmap.c
index 1a8bf76bfd03..c95d2ba27a0b 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -94,7 +94,7 @@ static void anon_vma_chain_free(struct anon_vma_chain *anon_vma_chain)
  * anonymous pages mapped into it with that anon_vma.
  *
  * The common case will be that we already have one, but if
- * if not we either need to find an adjacent mapping that we
+ * not we either need to find an adjacent mapping that we
  * can re-use the anon_vma from (very common when the only
  * reason for splitting a vma has been mprotect()), or we
  * allocate a new one.
diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c
index 29d6cbffb283..64b984091edb 100644
--- a/mm/sparse-vmemmap.c
+++ b/mm/sparse-vmemmap.c
@@ -9,7 +9,7 @@
  *
  * However, virtual mappings need a page table and TLBs. Many Linux
  * architectures already map their physical space using 1-1 mappings
- * via TLBs. For those arches the virtual memmory map is essentially
+ * via TLBs. For those arches the virtual memory map is essentially
  * for free if we use the same page size as the 1-1 mappings. In that
  * case the overhead consists of a few additional pages that are
  * allocated to create a view of memory for vmemmap.
diff --git a/net/Kconfig b/net/Kconfig
index ad0aafe903f8..72840626284b 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -253,7 +253,9 @@ config NET_TCPPROBE
         what was just said, you don't need it: say N.
 
         Documentation on how to use TCP connection probing can be found
-        at http://linux-net.osdl.org/index.php/TcpProbe
+        at:
+        
+          http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe
 
         To compile this code as a module, choose M here: the
         module will be called tcp_probe.
diff --git a/net/core/dev.c b/net/core/dev.c
index a3ef808b5e36..06d0e7b25385 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6218,7 +6218,7 @@ static void __net_exit default_device_exit(struct net *net)
 static void __net_exit default_device_exit_batch(struct list_head *net_list)
 {
         /* At exit all network devices most be removed from a network
-         * namespace.  Do this in the reverse order of registeration.
+         * namespace.  Do this in the reverse order of registration.
          * Do this across as many network namespaces as possible to
          * improve batching efficiency.
          */
diff --git a/net/dccp/Kconfig b/net/dccp/Kconfig
index ad6dffd9070e..b75968a04017 100644
--- a/net/dccp/Kconfig
+++ b/net/dccp/Kconfig
@@ -49,7 +49,9 @@ config NET_DCCPPROBE
         what was just said, you don't need it: say N.
 
         Documentation on how to use DCCP connection probing can be found
-        at http://linux-net.osdl.org/index.php/DccpProbe
+        at:
+        
+          http://www.linuxfoundation.org/collaborate/workgroups/networking/dccpprobe
 
         To compile this code as a module, choose M here: the
         module will be called dccp_probe.
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 0ba15633c418..0dcaa903e00e 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -1130,7 +1130,7 @@ static struct dn_dev *dn_dev_create(struct net_device *dev, int *err)
 /*
  * This processes a device up event. We only start up
  * the loopback device & ethernet devices with correct
- * MAC addreses automatically. Others must be started
+ * MAC addresses automatically. Others must be started
  * specifically.
  *
  * FIXME: How should we configure the loopback address ? If we could dispense
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9e95d7fb6d5a..a5a1050595d1 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -432,7 +432,9 @@ config INET_DIAG
         ---help---
           Support for INET (TCP, DCCP, etc) socket monitoring interface used by
           native Linux tools such as ss. ss is included in iproute2, currently
-          downloadable at <http://linux-net.osdl.org/index.php/Iproute2>.
+          downloadable at:
+          
+            http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2
 
           If unsure, say Y.
 
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index dc7c096ddfef..406f320336e6 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1350,7 +1350,7 @@ static inline unsigned int tcp_cwnd_test(struct tcp_sock *tp,
         return 0;
 }
 
-/* Intialize TSO state of a skb.
+/* Initialize TSO state of a skb.
  * This must be invoked the first time we consider transmitting
  * SKB onto the wire.
  */
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 059a3de647db..978e80e2c4a8 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -300,7 +300,7 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
                         goto out;
                 }
 
-                /* Reproduce AF_INET checks to make the bindings consitant */
+                /* Reproduce AF_INET checks to make the bindings consistent */
                 v4addr = addr->sin6_addr.s6_addr32[3];
                 chk_addr_ret = inet_addr_type(net, v4addr);
                 if (!sysctl_ip_nonlocal_bind &&
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a36270a994d7..f04d4a484d53 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -24,7 +24,7 @@ menuconfig NET_SCHED
           To administer these schedulers, you'll need the user-level utilities
           from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
           That package also contains some documentation; for more, check out
-          <http://linux-net.osdl.org/index.php/Iproute2>.
+          <http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2>.
 
           This Quality of Service (QoS) support will enable you to use
           Differentiated Services (diffserv) and Resource Reservation Protocol
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 97d2259ae999..e8fba959fffb 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -1615,7 +1615,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
  * A module includes a number of sections that are discarded
  * either when loaded or when used as built-in.
  * For loaded modules all functions marked __init and all data
- * marked __initdata will be discarded when the module has been intialized.
+ * marked __initdata will be discarded when the module has been initialized.
  * Likewise for modules used built-in the sections marked __exit
  * are discarded because __exit marked function are supposed to be called
  * only when a module is unloaded which never happens for built-in modules.
diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h
index 19ba16e8aacd..a4a863997bd5 100644
--- a/security/apparmor/include/match.h
+++ b/security/apparmor/include/match.h
@@ -28,7 +28,7 @@
  * The format used for transition tables is based on the GNU flex table
  * file format (--tables-file option; see Table File Format in the flex
  * info pages and the flex sources for documentation). The magic number
- * used in the header is 0x1B5E783D insted of 0xF13C57B1 though, because
+ * used in the header is 0x1B5E783D instead of 0xF13C57B1 though, because
  * the YY_ID_CHK (check) and YY_ID_DEF (default) tables are used
  * slightly differently (see the apparmor-parser package).
  */
diff --git a/sound/core/init.c b/sound/core/init.c
index 57b792e2439a..3e65da21a08c 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -642,7 +642,7 @@ static struct device_attribute card_number_attrs =
  *  external accesses.  Thus, you should call this function at the end
  *  of the initialization of the card.
  *
- *  Returns zero otherwise a negative error code if the registrain failed.
+ *  Returns zero otherwise a negative error code if the registration failed.
  */
 int snd_card_register(struct snd_card *card)
 {
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index e82c1f97d99e..c0ebb5162e95 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -984,7 +984,7 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push)
         if (push)
                 snd_pcm_update_hw_ptr(substream);
         /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
-         * a delta betwen the current jiffies, this gives a large enough
+         * a delta between the current jiffies, this gives a large enough
          * delta, effectively to skip the check once.
          */
         substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 265abcce9dba..9b915e27b5bd 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -264,7 +264,7 @@ static int __devinit snd_opl3sa2_detect(struct snd_card *card)
                 snd_printd("OPL3-SA [0x%lx] detect (1) = 0x%x (0x%x)\n", port, tmp, tmp1);
                 return -ENODEV;
         }
-        /* try if the MIC register is accesible */
+        /* try if the MIC register is accessible */
         tmp = snd_opl3sa2_read(chip, OPL3SA2_MIC);
         snd_opl3sa2_write(chip, OPL3SA2_MIC, 0x8a);
         if (((tmp1 = snd_opl3sa2_read(chip, OPL3SA2_MIC)) & 0x9f) != 0x8a) {
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index f19c11077255..fc53b9bca26d 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -188,7 +188,7 @@
 #define PLAYBACK_LIST_PTR       0x02            /* Pointer to the current period being played */
                                                 /* PTR[5:0], Default: 0x0 */
 #define PLAYBACK_UNKNOWN3       0x03            /* Not used ?? */
-#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA address */
                                                 /* DMA[31:0], Default: 0x0 */
 #define PLAYBACK_PERIOD_SIZE    0x05            /* Playback period size. win2000 uses 0x04000000 */
                                                 /* SIZE[31:16], Default: 0x0 */
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index d2d12c08f937..01b49388fafd 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1082,7 +1082,7 @@ snd_ca0106_pcm_pointer_capture(struct snd_pcm_substream *substream)
         struct snd_pcm_runtime *runtime = substream->runtime;
         struct snd_ca0106_pcm *epcm = runtime->private_data;
         snd_pcm_uframes_t ptr, ptr1, ptr2 = 0;
-        int channel = channel=epcm->channel_id;
+        int channel = epcm->channel_id;
 
         if (!epcm->running)
                 return 0;
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index df47f738098d..0c701e4ec8a5 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
                                                  */
 #define PLAYBACK_LIST_SIZE      0x01            /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000  */
 #define PLAYBACK_LIST_PTR       0x02            /* Pointer to the current period being played */
-#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA address */
 #define PLAYBACK_PERIOD_SIZE    0x05            /* Playback period size */
 #define PLAYBACK_POINTER        0x06            /* Playback period pointer. Sample currently in DAC */
 #define PLAYBACK_UNKNOWN1       0x07
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 153214940336..00f4817533b1 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -96,7 +96,7 @@
 #define PLAYBACK_LIST_SIZE      0x01            /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000  */
 #define PLAYBACK_LIST_PTR       0x02            /* Pointer to the current period being played */
 #define PLAYBACK_UNKNOWN3       0x03            /* Not used */
-#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR       0x04            /* Playback DMA address */
 #define PLAYBACK_PERIOD_SIZE    0x05            /* Playback period size. win2000 uses 0x04000000 */
 #define PLAYBACK_POINTER        0x06            /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
 #define PLAYBACK_FIFO_END_ADDRESS       0x07            /* Playback FIFO end address */
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 23a58f0d6cb9..7c17f45d876d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick.");
 #define RINGB_EN_2CODEC         0x0020
 #define RINGB_SING_BIT_DUAL     0x0040
 
-/* ****Port Adresses**** */
+/* ****Port Addresses**** */
 
 /*   Write & Read */
 #define ESM_INDEX               0x02
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0c98ef9156d8..f5eadfc0672a 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -487,7 +487,7 @@ struct hdspm {
         struct snd_kcontrol *playback_mixer_ctls[HDSPM_MAX_CHANNELS];
         /* but input to much, so not used */
         struct snd_kcontrol *input_mixer_ctls[HDSPM_MAX_CHANNELS];
-        /* full mixer accessable over mixer ioctl or hwdep-device */
+        /* full mixer accessible over mixer ioctl or hwdep-device */
         struct hdspm_mixer *mixer;
 
 };
@@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n)
         return bit2freq_tab[n];
 }
 
-/* Write/read to/from HDSPM with Adresses in Bytes
+/* Write/read to/from HDSPM with Addresses in Bytes
    not words but only 32Bit writes are allowed */
 
 static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg,
@@ -2908,7 +2908,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm
 
         /* Channel playback mixer as default control 
            Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders,
-           thats too * big for any alsamixer they are accesible via special
+           thats too * big for any alsamixer they are accessible via special
            IOCTL on hwdep and the mixer 2dimensional mixer control
         */
 
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index 581a670e8261..edce8a27e3ee 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -51,7 +51,7 @@ static struct snd_ps3_card_info the_card;
 static int snd_ps3_start_delay = CONFIG_SND_PS3_DEFAULT_START_DELAY;
 
 module_param_named(start_delay, snd_ps3_start_delay, uint, 0644);
-MODULE_PARM_DESC(start_delay, "time to insert silent data in milisec");
+MODULE_PARM_DESC(start_delay, "time to insert silent data in ms");
 
 static int index = SNDRV_DEFAULT_IDX1;
 static char *id = SNDRV_DEFAULT_STR1;
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index 6447dbb2f123..72f0dbc6e0f2 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -1957,7 +1957,7 @@ static int max98088_probe(struct snd_soc_codec *codec)
                return ret;
        }
 
-       /* initalize private data */
+       /* initialize private data */
 
        max98088->sysclk = (unsigned)-1;
        max98088->eq_textcnt = 0;
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index c8bd90488a87..761e02b4a6e0 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -61,7 +61,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
                 goto out3;
         }
 
-        /* Set audio clock heirachy for S/PDIF */
+        /* Set audio clock hierarchy for S/PDIF */
         clk_set_parent(mout_epll, fout_epll);
         clk_set_parent(sclk_audio0, mout_epll);
         clk_set_parent(sclk_spdif, sclk_audio0);
@@ -79,7 +79,7 @@ out1:
 
 /* We should haved to set clock directly on this part because of clock
  * scheme of Samsudng SoCs did not support to set rates from abstrct
- * clock of it's heirachy.
+ * clock of it's hierarchy.
  */
 static int set_audio_clock_rate(unsigned long epll_rate,
                                 unsigned long audio_rate)
@@ -197,7 +197,7 @@ static int __init smdk_init(void)
         if (ret)
                 goto err1;
 
-        /* Set audio clock heirachy manually */
+        /* Set audio clock hierarchy manually */
         ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
         if (ret)
                 goto err1;