gianfar: Add I/O barriers when touching buffer descriptor ownership.

The hardware must not see that is given ownership of a buffer until it is
completely written, and when the driver receives ownership of a buffer,
it must ensure that any other reads to the buffer reflect its final
state.  Thus, I/O barriers are added where required.

Without this patch, I have observed GCC reordering the setting of
bdp->length and bdp->status in gfar_new_skb.  Hardware reordering
was also theoretically possible.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 11 insertions, 0 deletions

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index b666a0cc0642..f5b3cba23fc5 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1025,6 +1025,15 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         dev->trans_start = jiffies;
 
+        /* The powerpc-specific eieio() is used, as wmb() has too strong
+         * semantics (it requires synchronization between cacheable and
+         * uncacheable mappings, which eieio doesn't provide and which we
+         * don't need), thus requiring a more expensive sync instruction.  At
+         * some point, the set of architecture-independent barrier functions
+         * should be expanded to include weaker barriers.
+         */
+
+        eieio();
         txbdp->status = status;
 
         /* If this was the last BD in the ring, the next one */
@@ -1301,6 +1310,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
         bdp->length = 0;
 
         /* Mark the buffer empty */
+        eieio();
         bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT);
 
         return skb;
@@ -1484,6 +1494,7 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
         bdp = priv->cur_rx;
 
         while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
+                rmb();
                 skb = priv->rx_skbuff[priv->skb_currx];
 
                 if (!(bdp->status &