Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32X
  hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32X
  hwmon: (adt7473) Fix some bogosity in documentation file
  hwmon: Define sysfs interface for energy consumption register
  hwmon: (it87) Prevent power-off on Shuttle SN68PT
  eeepc-laptop: Fix hwmon interface

5 files changed, 83 insertions, 36 deletions

diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 2126de34c711..1cbf671822e2 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -14,14 +14,14 @@ Description
 
 This driver implements support for the Analog Devices ADT7473 chip family.
 
-The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
 specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has three (3) 16-bit counters for
+temperatures and two (2) voltages. It has four (4) 16-bit counters for
 measuring fan speed. There are three (3) PWM outputs that can be used
 to control fan speed.
 
 A sophisticated control system for the PWM outputs is designed into the
-LM85 that allows fan speed to be adjusted automatically based on any of the
+ADT7473 that allows fan speed to be adjusted automatically based on any of the
 three temperature sensors. Each PWM output is individually adjustable and
 programmable. Once configured, the ADT7473 will adjust the PWM outputs in
 response to the measured temperatures without further host intervention.
@@ -46,14 +46,6 @@ from the raw value to get the temperature value.
 The Analog Devices datasheet is very detailed and describes a procedure for
 determining an optimal configuration for the automatic PWM control.
 
-Hardware Configurations
------------------------
-
-The ADT7473 chips have an optional SMBALERT output that can be used to
-signal the chipset in case a limit is exceeded or the temperature sensors
-fail. Individual sensor interrupts can be masked so they won't trigger
-SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
-
 Configuration Notes
 -------------------
 
@@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following:
 
 * PWM Control
 
-* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
-* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
 
 point1: Set the pwm speed at a lower temperature bound.
 point2: Set the pwm speed at a higher temperature bound.
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 2d845730d4e0..6dbfd5efd991 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -329,6 +329,10 @@ power[1-*]_average		Average power use
                                 Unit: microWatt
                                 RO
 
+power[1-*]_average_interval     Power use averaging interval
+                                Unit: milliseconds
+                                RW
+
 power[1-*]_average_highest      Historical average maximum power use
                                 Unit: microWatt
                                 RO
@@ -354,6 +358,14 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
                                 WO
 
 **********
+* Energy *
+**********
+
+energy[1-*]_input               Cumulative energy use
+                                Unit: microJoule
+                                RO
+
+**********
 * Alarms *
 **********
 
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d568c65c1370..d9e7a49d6cbf 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -279,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "OTES1 Fan",          36, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
-        { 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
+        { 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
                 { "CPU Core",            0, 0, 10, 1, 0 },
                 { "DDR",                 1, 0, 20, 1, 0 },
                 { "DDR VTT",             2, 0, 10, 1, 0 },
@@ -303,6 +303,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
                 { "SYS Fan",            34, 2, 60, 1, 0 },
                 { "AUX1 Fan",           35, 2, 60, 1, 0 },
                 { "AUX2 Fan",           36, 2, 60, 1, 0 },
+                { "AUX3 Fan",           37, 2, 60, 1, 0 },
                 { NULL, 0, 0, 0, 0, 0 } }
         },
         { 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f1133081cc42..d793cc011990 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -46,6 +46,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
 #include <asm/io.h>
 
 #define DRVNAME "it87"
@@ -236,6 +238,8 @@ struct it87_sio_data {
         /* Values read from Super-I/O config space */
         u8 revision;
         u8 vid_value;
+        /* Values set based on DMI strings */
+        u8 skip_pwm;
 };
 
 /* For each registered chip, we need to keep some data in memory.
@@ -964,6 +968,7 @@ static int __init it87_find(unsigned short *address,
 {
         int err = -ENODEV;
         u16 chip_type;
+        const char *board_vendor, *board_name;
 
         superio_enter();
         chip_type = force_id ? force_id : superio_inw(DEVID);
@@ -1022,6 +1027,24 @@ static int __init it87_find(unsigned short *address,
                         pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
         }
 
+        /* Disable specific features based on DMI strings */
+        board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+        board_name = dmi_get_system_info(DMI_BOARD_NAME);
+        if (board_vendor && board_name) {
+                if (strcmp(board_vendor, "nVIDIA") == 0
+                 && strcmp(board_name, "FN68PT") == 0) {
+                        /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+                           connected to a fan, but to something else. One user
+                           has reported instant system power-off when changing
+                           the PWM2 duty cycle, so we disable it.
+                           I use the board name string as the trigger in case
+                           the same board is ever used in other systems. */
+                        pr_info("it87: Disabling pwm2 due to "
+                                "hardware constraints\n");
+                        sio_data->skip_pwm = (1 << 1);
+                }
+        }
+
 exit:
         superio_exit();
         return err;
@@ -1168,25 +1191,33 @@ static int __devinit it87_probe(struct platform_device *pdev)
         }
 
         if (enable_pwm_interface) {
-                if ((err = device_create_file(dev,
-                     &sensor_dev_attr_pwm1_enable.dev_attr))
-                 || (err = device_create_file(dev,
-                     &sensor_dev_attr_pwm2_enable.dev_attr))
-                 || (err = device_create_file(dev,
-                     &sensor_dev_attr_pwm3_enable.dev_attr))
-                 || (err = device_create_file(dev,
-                     &sensor_dev_attr_pwm1.dev_attr))
-                 || (err = device_create_file(dev,
-                     &sensor_dev_attr_pwm2.dev_attr))
-                 || (err = device_create_file(dev,
-                     &sensor_dev_attr_pwm3.dev_attr))
-                 || (err = device_create_file(dev,
-                     &dev_attr_pwm1_freq))
-                 || (err = device_create_file(dev,
-                     &dev_attr_pwm2_freq))
-                 || (err = device_create_file(dev,
-                     &dev_attr_pwm3_freq)))
-                        goto ERROR4;
+                if (!(sio_data->skip_pwm & (1 << 0))) {
+                        if ((err = device_create_file(dev,
+                             &sensor_dev_attr_pwm1_enable.dev_attr))
+                         || (err = device_create_file(dev,
+                             &sensor_dev_attr_pwm1.dev_attr))
+                         || (err = device_create_file(dev,
+                             &dev_attr_pwm1_freq)))
+                                goto ERROR4;
+                }
+                if (!(sio_data->skip_pwm & (1 << 1))) {
+                        if ((err = device_create_file(dev,
+                             &sensor_dev_attr_pwm2_enable.dev_attr))
+                         || (err = device_create_file(dev,
+                             &sensor_dev_attr_pwm2.dev_attr))
+                         || (err = device_create_file(dev,
+                             &dev_attr_pwm2_freq)))
+                                goto ERROR4;
+                }
+                if (!(sio_data->skip_pwm & (1 << 2))) {
+                        if ((err = device_create_file(dev,
+                             &sensor_dev_attr_pwm3_enable.dev_attr))
+                         || (err = device_create_file(dev,
+                             &sensor_dev_attr_pwm3.dev_attr))
+                         || (err = device_create_file(dev,
+                             &dev_attr_pwm3_freq)))
+                                goto ERROR4;
+                }
         }
 
         if (data->type == it8712 || data->type == it8716
@@ -1546,6 +1577,7 @@ static int __init sm_it87_init(void)
         unsigned short isa_address=0;
         struct it87_sio_data sio_data;
 
+        memset(&sio_data, 0, sizeof(struct it87_sio_data));
         err = it87_find(&isa_address, &sio_data);
         if (err)
                 return err;
diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index facdb9893c84..1ee8501e90f1 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -450,12 +450,14 @@ static int eeepc_get_fan_pwm(void)
         int value = 0;
 
         read_acpi_int(NULL, EEEPC_EC_FAN_PWM, &value);
+        value = value * 255 / 100;
         return (value);
 }
 
 static void eeepc_set_fan_pwm(int value)
 {
-        value = SENSORS_LIMIT(value, 0, 100);
+        value = SENSORS_LIMIT(value, 0, 255);
+        value = value * 100 / 255;
         ec_write(EEEPC_EC_SC02, value);
 }
 
@@ -520,15 +522,23 @@ static ssize_t show_sys_hwmon(int (*get)(void), char *buf)
         static SENSOR_DEVICE_ATTR(_name, _mode, show_##_name, store_##_name, 0);
 
 EEEPC_CREATE_SENSOR_ATTR(fan1_input, S_IRUGO, eeepc_get_fan_rpm, NULL);
-EEEPC_CREATE_SENSOR_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+EEEPC_CREATE_SENSOR_ATTR(pwm1, S_IRUGO | S_IWUSR,
                          eeepc_get_fan_pwm, eeepc_set_fan_pwm);
 EEEPC_CREATE_SENSOR_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
                          eeepc_get_fan_ctrl, eeepc_set_fan_ctrl);
 
+static ssize_t
+show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+        return sprintf(buf, "eeepc\n");
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
 static struct attribute *hwmon_attributes[] = {
-        &sensor_dev_attr_fan1_pwm.dev_attr.attr,
+        &sensor_dev_attr_pwm1.dev_attr.attr,
         &sensor_dev_attr_fan1_input.dev_attr.attr,
         &sensor_dev_attr_pwm1_enable.dev_attr.attr,
+        &sensor_dev_attr_name.dev_attr.attr,
         NULL
 };