netdev: bfin_mac: push settings to platform resources

Move all the pin settings out of the Kconfig and into the platform
resources (MII vs RMII).  This clean up also lets us push out the
phy settings so that board porters may control the layout.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

16 files changed, 421 insertions, 71 deletions

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index f95e6096719b..b894c8abe7ec 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -87,13 +87,55 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = {
+        P_MII0_ETxD0,
+        P_MII0_ETxD1,
+        P_MII0_ETxEN,
+        P_MII0_ERxD0,
+        P_MII0_ERxD1,
+        P_MII0_TxCLK,
+        P_MII0_PHYINT,
+        P_MII0_CRS,
+        P_MII0_MDC,
+        P_MII0_MDIO,
+        0
+};
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+        {
+                .addr = 2,
+                .irq = IRQ_MAC_PHYINT,
+        },
+        {
+                .addr = 3,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 3,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
index bead810a6546..e6ce1d7c523a 100644
--- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c
+++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c
@@ -81,13 +81,35 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 38037c7e125a..2c31af7a320a 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -273,13 +273,35 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 6cc64a1e78b9..9a736a850c5c 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -193,13 +193,35 @@ static struct platform_device rtc_device = {
 
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index df82723fb504..9222bc00bbd3 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -366,13 +366,35 @@ static struct platform_device dm9000_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index ae4130e97c01..9ec575729e2c 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -257,13 +257,35 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
index e2e7be40ef44..836698c4ee54 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -597,13 +597,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
index 752c833f7ca8..2a85670273cb 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c
@@ -562,13 +562,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 05d45994480e..49800518412c 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -68,13 +68,35 @@ static struct platform_device rtc_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 6b03808800a6..b95807894e25 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -99,13 +99,35 @@ static struct platform_device smc91x_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index cd2c797c8c9f..3aa344ce8e52 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -327,13 +327,35 @@ static struct platform_device bfin_can_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index a4d62b5fc7ba..31498add1a42 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -564,13 +564,35 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_MII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = IRQ_MAC_PHYINT,
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number = 1,
+        .phydev_data = bfin_phydev_data,
+        .phy_mode = PHY_INTERFACE_MODE_MII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
 static struct platform_device bfin_mii_bus = {
         .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
 };
 
 static struct platform_device bfin_mac_device = {
         .name = "bfin_mac",
-        .dev.platform_data = &bfin_mii_bus,
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
 };
 #endif
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 77c1fab7d774..c598fe008e37 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -883,14 +883,6 @@ config BFIN_RX_DESC_NUM
         help
           Set the number of buffer packets used in driver.
 
-config BFIN_MAC_RMII
-        bool "RMII PHY Interface"
-        depends on BFIN_MAC
-        default y if BFIN527_EZKIT
-        default n if BFIN537_STAMP
-        help
-          Use Reduced PHY MII Interface
-
 config BFIN_MAC_USE_HWSTAMP
         bool "Use IEEE 1588 hwstamp"
         depends on BFIN_MAC && BF518
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index f7233191162b..ce1e5e9d06f6 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -1,7 +1,7 @@
 /*
  * Blackfin On-Chip MAC Driver
  *
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Enter bugs at http://blackfin.uclinux.org/
  *
@@ -23,7 +23,6 @@
 #include <linux/device.h>
 #include <linux/spinlock.h>
 #include <linux/mii.h>
-#include <linux/phy.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
@@ -76,12 +75,6 @@ static struct net_dma_desc_tx *current_tx_ptr;
 static struct net_dma_desc_tx *tx_desc;
 static struct net_dma_desc_rx *rx_desc;
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-static u16 pin_req[] = P_RMII0;
-#else
-static u16 pin_req[] = P_MII0;
-#endif
-
 static void desc_list_free(void)
 {
         struct net_dma_desc_rx *r;
@@ -347,23 +340,23 @@ static void bfin_mac_adjust_link(struct net_device *dev)
                 }
 
                 if (phydev->speed != lp->old_speed) {
-#if defined(CONFIG_BFIN_MAC_RMII)
-                        u32 opmode = bfin_read_EMAC_OPMODE();
-                        switch (phydev->speed) {
-                        case 10:
-                                opmode |= RMII_10;
-                                break;
-                        case 100:
-                                opmode &= ~(RMII_10);
-                                break;
-                        default:
-                                printk(KERN_WARNING
-                                        "%s: Ack!  Speed (%d) is not 10/100!\n",
-                                        DRV_NAME, phydev->speed);
-                                break;
+                        if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+                                u32 opmode = bfin_read_EMAC_OPMODE();
+                                switch (phydev->speed) {
+                                case 10:
+                                        opmode |= RMII_10;
+                                        break;
+                                case 100:
+                                        opmode &= ~RMII_10;
+                                        break;
+                                default:
+                                        printk(KERN_WARNING
+                                                "%s: Ack!  Speed (%d) is not 10/100!\n",
+                                                DRV_NAME, phydev->speed);
+                                        break;
+                                }
+                                bfin_write_EMAC_OPMODE(opmode);
                         }
-                        bfin_write_EMAC_OPMODE(opmode);
-#endif
 
                         new_state = 1;
                         lp->old_speed = phydev->speed;
@@ -392,7 +385,7 @@ static void bfin_mac_adjust_link(struct net_device *dev)
 /* MDC  = 2.5 MHz */
 #define MDC_CLK 2500000
 
-static int mii_probe(struct net_device *dev)
+static int mii_probe(struct net_device *dev, int phy_mode)
 {
         struct bfin_mac_local *lp = netdev_priv(dev);
         struct phy_device *phydev = NULL;
@@ -411,8 +404,8 @@ static int mii_probe(struct net_device *dev)
         sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
         bfin_write_EMAC_SYSCTL(sysctl);
 
-        /* search for connect PHY device */
-        for (i = 0; i < PHY_MAX_ADDR; i++) {
+        /* search for connected PHY device */
+        for (i = 0; i < PHY_MAX_ADDR; ++i) {
                 struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
 
                 if (!tmp_phydev)
@@ -429,13 +422,14 @@ static int mii_probe(struct net_device *dev)
                 return -ENODEV;
         }
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-        phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
-                        0, PHY_INTERFACE_MODE_RMII);
-#else
+        if (phy_mode != PHY_INTERFACE_MODE_RMII &&
+                phy_mode != PHY_INTERFACE_MODE_MII) {
+                printk(KERN_INFO "%s: Invalid phy interface mode\n", dev->name);
+                return -EINVAL;
+        }
+
         phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
-                        0, PHY_INTERFACE_MODE_MII);
-#endif
+                        0, phy_mode);
 
         if (IS_ERR(phydev)) {
                 printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
@@ -570,6 +564,8 @@ static const struct ethtool_ops bfin_mac_ethtool_ops = {
 /**************************************************************************/
 void setup_system_regs(struct net_device *dev)
 {
+        struct bfin_mac_local *lp = netdev_priv(dev);
+        int i;
         unsigned short sysctl;
 
         /*
@@ -577,6 +573,15 @@ void setup_system_regs(struct net_device *dev)
          * Configure checksum support and rcve frame word alignment
          */
         sysctl = bfin_read_EMAC_SYSCTL();
+        /*
+         * check if interrupt is requested for any PHY,
+         * enable PHY interrupt only if needed
+         */
+        for (i = 0; i < PHY_MAX_ADDR; ++i)
+                if (lp->mii_bus->irq[i] != PHY_POLL)
+                        break;
+        if (i < PHY_MAX_ADDR)
+                sysctl |= PHYIE;
         sysctl |= RXDWA;
 #if defined(BFIN_MAC_CSUM_OFFLOAD)
         sysctl |= RXCKS;
@@ -1203,7 +1208,7 @@ static void bfin_mac_disable(void)
 /*
  * Enable Interrupts, Receive, and Transmit
  */
-static int bfin_mac_enable(void)
+static int bfin_mac_enable(struct phy_device *phydev)
 {
         int ret;
         u32 opmode;
@@ -1233,12 +1238,13 @@ static int bfin_mac_enable(void)
                 opmode |= DRO | DC | PSF;
         opmode |= RE;
 
-#if defined(CONFIG_BFIN_MAC_RMII)
-        opmode |= RMII; /* For Now only 100MBit are supported */
+        if (phydev->interface == PHY_INTERFACE_MODE_RMII) {
+                opmode |= RMII; /* For Now only 100MBit are supported */
 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
-        opmode |= TE;
-#endif
+                opmode |= TE;
 #endif
+        }
+
         /* Turn on the EMAC rx */
         bfin_write_EMAC_OPMODE(opmode);
 
@@ -1270,7 +1276,7 @@ static void bfin_mac_timeout(struct net_device *dev)
         if (netif_queue_stopped(lp->ndev))
                 netif_wake_queue(lp->ndev);
 
-        bfin_mac_enable();
+        bfin_mac_enable(lp->phydev);
 
         /* We can accept TX packets again */
         dev->trans_start = jiffies; /* prevent tx timeout */
@@ -1342,11 +1348,19 @@ static void bfin_mac_set_multicast_list(struct net_device *dev)
 
 static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
 {
+        struct bfin_mac_local *lp = netdev_priv(netdev);
+
+        if (!netif_running(netdev))
+                return -EINVAL;
+
         switch (cmd) {
         case SIOCSHWTSTAMP:
                 return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
         default:
-                return -EOPNOTSUPP;
+                if (lp->phydev)
+                        return phy_mii_ioctl(lp->phydev, ifr, cmd);
+                else
+                        return -EOPNOTSUPP;
         }
 }
 
@@ -1394,7 +1408,7 @@ static int bfin_mac_open(struct net_device *dev)
         setup_mac_addr(dev->dev_addr);
 
         bfin_mac_disable();
-        ret = bfin_mac_enable();
+        ret = bfin_mac_enable(lp->phydev);
         if (ret)
                 return ret;
         pr_debug("hardware init finished\n");
@@ -1450,6 +1464,7 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
         struct net_device *ndev;
         struct bfin_mac_local *lp;
         struct platform_device *pd;
+        struct bfin_mii_bus_platform_data *mii_bus_data;
         int rc;
 
         ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
@@ -1501,11 +1516,12 @@ static int __devinit bfin_mac_probe(struct platform_device *pdev)
         if (!lp->mii_bus) {
                 dev_err(&pdev->dev, "Cannot get mii_bus!\n");
                 rc = -ENODEV;
-                goto out_err_mii_bus_probe;
+                goto out_err_probe_mac;
         }
         lp->mii_bus->priv = ndev;
+        mii_bus_data = pd->dev.platform_data;
 
-        rc = mii_probe(ndev);
+        rc = mii_probe(ndev, mii_bus_data->phy_mode);
         if (rc) {
                 dev_err(&pdev->dev, "MII Probe failed!\n");
                 goto out_err_mii_probe;
@@ -1552,8 +1568,6 @@ out_err_request_irq:
 out_err_mii_probe:
         mdiobus_unregister(lp->mii_bus);
         mdiobus_free(lp->mii_bus);
-out_err_mii_bus_probe:
-        peripheral_free_list(pin_req);
 out_err_probe_mac:
         platform_set_drvdata(pdev, NULL);
         free_netdev(ndev);
@@ -1576,8 +1590,6 @@ static int __devexit bfin_mac_remove(struct platform_device *pdev)
 
         free_netdev(ndev);
 
-        peripheral_free_list(pin_req);
-
         return 0;
 }
 
@@ -1623,12 +1635,21 @@ static int bfin_mac_resume(struct platform_device *pdev)
 static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 {
         struct mii_bus *miibus;
+        struct bfin_mii_bus_platform_data *mii_bus_pd;
+        const unsigned short *pin_req;
         int rc, i;
 
+        mii_bus_pd = dev_get_platdata(&pdev->dev);
+        if (!mii_bus_pd) {
+                dev_err(&pdev->dev, "No peripherals in platform data!\n");
+                return -EINVAL;
+        }
+
         /*
          * We are setting up a network card,
          * so set the GPIO pins to Ethernet mode
          */
+        pin_req = mii_bus_pd->mac_peripherals;
         rc = peripheral_request_list(pin_req, DRV_NAME);
         if (rc) {
                 dev_err(&pdev->dev, "Requesting peripherals failed!\n");
@@ -1645,13 +1666,30 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 
         miibus->parent = &pdev->dev;
         miibus->name = "bfin_mii_bus";
+        miibus->phy_mask = mii_bus_pd->phy_mask;
+
         snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
         miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
-        if (miibus->irq == NULL)
-                goto out_err_alloc;
-        for (i = 0; i < PHY_MAX_ADDR; ++i)
+        if (!miibus->irq)
+                goto out_err_irq_alloc;
+
+        for (i = rc; i < PHY_MAX_ADDR; ++i)
                 miibus->irq[i] = PHY_POLL;
 
+        rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR);
+        if (rc != mii_bus_pd->phydev_number)
+                dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n",
+                        mii_bus_pd->phydev_number);
+        for (i = 0; i < rc; ++i) {
+                unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr;
+                if (phyaddr < PHY_MAX_ADDR)
+                        miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq;
+                else
+                        dev_err(&pdev->dev,
+                                "Invalid PHY address %i for phydev %i\n",
+                                phyaddr, i);
+        }
+
         rc = mdiobus_register(miibus);
         if (rc) {
                 dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
@@ -1663,6 +1701,7 @@ static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
 
 out_err_mdiobus_register:
         kfree(miibus->irq);
+out_err_irq_alloc:
         mdiobus_free(miibus);
 out_err_alloc:
         peripheral_free_list(pin_req);
@@ -1673,11 +1712,15 @@ out_err_alloc:
 static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
 {
         struct mii_bus *miibus = platform_get_drvdata(pdev);
+        struct bfin_mii_bus_platform_data *mii_bus_pd =
+                dev_get_platdata(&pdev->dev);
+
         platform_set_drvdata(pdev, NULL);
         mdiobus_unregister(miibus);
         kfree(miibus->irq);
         mdiobus_free(miibus);
-        peripheral_free_list(pin_req);
+        peripheral_free_list(mii_bus_pd->mac_peripherals);
+
         return 0;
 }
 
diff --git a/drivers/net/bfin_mac.h b/drivers/net/bfin_mac.h
index 04e4050df18b..aed68bed2365 100644
--- a/drivers/net/bfin_mac.h
+++ b/drivers/net/bfin_mac.h
@@ -14,6 +14,8 @@
 #include <linux/clocksource.h>
 #include <linux/timecompare.h>
 #include <linux/timer.h>
+#include <linux/etherdevice.h>
+#include <linux/bfin_mac.h>
 
 #define BFIN_MAC_CSUM_OFFLOAD
 
diff --git a/include/linux/bfin_mac.h b/include/linux/bfin_mac.h
new file mode 100644
index 000000000000..904dec7d03a1
--- /dev/null
+++ b/include/linux/bfin_mac.h
@@ -0,0 +1,29 @@
+/*
+ * Blackfin On-Chip MAC Driver
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _LINUX_BFIN_MAC_H_
+#define _LINUX_BFIN_MAC_H_
+
+#include <linux/phy.h>
+
+struct bfin_phydev_platform_data {
+        unsigned short addr;
+        int irq;
+};
+
+struct bfin_mii_bus_platform_data {
+        int phydev_number;
+        struct bfin_phydev_platform_data *phydev_data;
+        const unsigned short *mac_peripherals;
+        int phy_mode;
+        unsigned int phy_mask;
+};
+
+#endif