[PATCH] Char: mxser_new, comments cleanup

mxser_new, comments cleanup

- Remove commented code, since we have version control.
- Remove comments containing "following added by..." and "above added by,..".
  It's useless.
- Align other comments.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 16 insertions, 127 deletions

diff --git a/drivers/char/mxser_new.c b/drivers/char/mxser_new.c
index 285104d379cb..a3328bb147b9 100644
--- a/drivers/char/mxser_new.c
+++ b/drivers/char/mxser_new.c
@@ -346,8 +346,6 @@ static int CheckIsMoxaMust(int io)
         return MOXA_OTHER_UART;
 }
 
-/* above is modified by Victor Yu. 08-15-2002 */
-
 static void process_txrx_fifo(struct mxser_port *info)
 {
         int i;
@@ -581,12 +579,10 @@ static int mxser_change_speed(struct mxser_port *info,
                         fcr = 0;
         } else {
                 fcr = UART_FCR_ENABLE_FIFO;
-                /* following add by Victor Yu. 08-30-2002 */
                 if (info->board->chip_flag) {
                         fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
                         SET_MOXA_MUST_FIFO_VALUE(info);
                 } else {
-                        /* above add by Victor Yu. 08-30-2002 */
                         switch (info->rx_trigger) {
                         case 1:
                                 fcr |= UART_FCR_TRIGGER_1;
@@ -612,19 +608,8 @@ static int mxser_change_speed(struct mxser_port *info,
                 info->IER |= UART_IER_MSI;
                 if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
                         info->MCR |= UART_MCR_AFE;
-/*                      status = mxser_get_msr(info->ioaddr, 0, info->port); */
-/*
-        save_flags(flags);
-        cli();
-        status = inb(baseaddr + UART_MSR);
-        restore_flags(flags);
-*/
-                        /* mxser_check_modem_status(info, status); */
                 } else {
-/*                      status = mxser_get_msr(info->ioaddr, 0, info->port); */
-                        /* MX_LOCK(&info->slock); */
                         status = inb(info->ioaddr + UART_MSR);
-                        /* MX_UNLOCK(&info->slock); */
                         if (info->tty->hw_stopped) {
                                 if (status & UART_MSR_CTS) {
                                         info->tty->hw_stopped = 0;
@@ -692,7 +677,6 @@ static int mxser_change_speed(struct mxser_port *info,
                                                 UART_LSR_FE;
                 }
         }
-        /* following add by Victor Yu. 09-02-2002 */
         if (info->board->chip_flag) {
                 spin_lock_irqsave(&info->slock, flags);
                 SET_MOXA_MUST_XON1_VALUE(info->ioaddr, START_CHAR(info->tty));
@@ -707,18 +691,8 @@ static int mxser_change_speed(struct mxser_port *info,
                 } else {
                         DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
                 }
-                /*
-                   if ( I_IXANY(info->tty) ) {
-                   info->MCR |= MOXA_MUST_MCR_XON_ANY;
-                   ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->ioaddr);
-                   } else {
-                   info->MCR &= ~MOXA_MUST_MCR_XON_ANY;
-                   DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->ioaddr);
-                   }
-                 */
                 spin_unlock_irqrestore(&info->slock, flags);
         }
-        /* above add by Victor Yu. 09-02-2002 */
 
 
         outb(fcr, info->ioaddr + UART_FCR);     /* set fcr */
@@ -852,12 +826,9 @@ static int mxser_startup(struct mxser_port *info)
          * Finally, enable interrupts
          */
         info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
-        /* info->IER = UART_IER_RLSI | UART_IER_RDI; */
 
-        /* following add by Victor Yu. 08-30-2002 */
         if (info->board->chip_flag)
                 info->IER |= MOXA_MUST_IER_EGDAI;
-        /* above add by Victor Yu. 08-30-2002 */
         outb(info->IER, info->ioaddr + UART_IER);       /* enable interrupts */
 
         /*
@@ -917,13 +888,11 @@ static void mxser_shutdown(struct mxser_port *info)
         outb(info->MCR, info->ioaddr + UART_MCR);
 
         /* clear Rx/Tx FIFO's */
-        /* following add by Victor Yu. 08-30-2002 */
         if (info->board->chip_flag)
                 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
                                 MOXA_MUST_FCR_GDA_MODE_ENABLE,
                                 info->ioaddr + UART_FCR);
         else
-                /* above add by Victor Yu. 08-30-2002 */
                 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
                         info->ioaddr + UART_FCR);
 
@@ -935,10 +904,8 @@ static void mxser_shutdown(struct mxser_port *info)
 
         info->flags &= ~ASYNC_INITIALIZED;
 
-        /* following add by Victor Yu. 09-23-2002 */
         if (info->board->chip_flag)
                 SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
-        /* above add by Victor Yu. 09-23-2002 */
 
         spin_unlock_irqrestore(&info->slock, flags);
 }
@@ -991,12 +958,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
         info->session = process_session(current);
         info->pgrp = process_group(current);
 
-        /*
-        status = mxser_get_msr(info->base, 0, info->port);
-        mxser_check_modem_status(info, status);
-        */
-
-/* unmark here for very high baud rate (ex. 921600 bps) used */
+        /* unmark here for very high baud rate (ex. 921600 bps) used */
         tty->low_latency = 1;
         return 0;
 }
@@ -1070,9 +1032,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
         info->IER &= ~UART_IER_RLSI;
         if (info->board->chip_flag)
                 info->IER &= ~MOXA_MUST_RECV_ISR;
-/* by William
-        info->read_status_mask &= ~UART_LSR_DR;
-*/
+
         if (info->flags & ASYNC_INITIALIZED) {
                 outb(info->IER, info->ioaddr + UART_IER);
                 /*
@@ -1135,8 +1095,7 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou
                 total += c;
         }
 
-        if (info->xmit_cnt && !tty->stopped
-                        /*&& !(info->IER & UART_IER_THRI)*/) {
+        if (info->xmit_cnt && !tty->stopped) {
                 if (!tty->hw_stopped ||
                                 (info->type == PORT_16550A) ||
                                 (info->board->chip_flag)) {
@@ -1167,7 +1126,7 @@ static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
         info->xmit_head &= SERIAL_XMIT_SIZE - 1;
         info->xmit_cnt++;
         spin_unlock_irqrestore(&info->slock, flags);
-        if (!tty->stopped /*&& !(info->IER & UART_IER_THRI)*/) {
+        if (!tty->stopped) {
                 if (!tty->hw_stopped ||
                                 (info->type == PORT_16550A) ||
                                 info->board->chip_flag) {
@@ -1231,14 +1190,12 @@ static void mxser_flush_buffer(struct tty_struct *tty)
         spin_lock_irqsave(&info->slock, flags);
         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
 
-        /* below added by shinhay */
         fcr = inb(info->ioaddr + UART_FCR);
         outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
                 info->ioaddr + UART_FCR);
         outb(fcr, info->ioaddr + UART_FCR);
 
         spin_unlock_irqrestore(&info->slock, flags);
-        /* above added by shinhay */
 
         tty_wakeup(tty);
 }
@@ -1309,10 +1266,9 @@ static int mxser_set_serial_info(struct mxser_port *info,
                 info->closing_wait = new_serial.closing_wait * HZ / 100;
                 info->tty->low_latency =
                                 (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-                info->tty->low_latency = 0;     /* (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; */
+                info->tty->low_latency = 0;
         }
 
-        /* added by casper, 3/17/2000, for mouse */
         info->type = new_serial.type;
 
         process_txrx_fifo(info);
@@ -1430,7 +1386,6 @@ static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
 static int mxser_program_mode(int port)
 {
         int id, i, j, n;
-        /* unsigned long flags; */
 
         spin_lock(&gm_lock);
         outb(0, port);
@@ -1440,7 +1395,6 @@ static int mxser_program_mode(int port)
         (void)inb(port);
         outb(0, port);
         (void)inb(port);
-        /* restore_flags(flags); */
         spin_unlock(&gm_lock);
 
         id = inb(port + 1) & 0x1F;
@@ -1623,7 +1577,6 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
                                         continue;
 
                                 status = mxser_get_msr(port->ioaddr, 0, i);
-/*                              mxser_check_modem_status(port, status); */
 
                                 if (status & UART_MSR_TERI)
                                         port->icount.rng++;
@@ -1707,7 +1660,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
         if (tty->index == MXSER_PORTS)
                 return mxser_ioctl_special(cmd, argp);
 
-        /* following add by Victor Yu. 01-05-2004 */
         if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
                 int p;
                 unsigned long opmode;
@@ -1739,7 +1691,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
                 }
                 return 0;
         }
-        /* above add by Victor Yu. 01-05-2004 */
 
         if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
                         test_bit(TTY_IO_ERROR, &tty->flags))
@@ -1829,7 +1780,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
                 cnow = info->icount;
                 spin_unlock_irqrestore(&info->slock, flags);
                 p_cuser = argp;
-                /* modified by casper 1/11/2000 */
                 if (put_user(cnow.frame, &p_cuser->frame))
                         return -EFAULT;
                 if (put_user(cnow.brk, &p_cuser->brk))
@@ -1855,7 +1805,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
                 info->mon_data.rxcnt = 0;
                 info->mon_data.txcnt = 0;
                 return 0;
-/* (above) added by James. */
         case MOXA_ASPP_SETBAUD:{
                 long baud;
                 if (get_user(baud, (long __user *)argp))
@@ -1886,8 +1835,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file,
         case MOXA_ASPP_MON: {
                 int mcr, status;
 
-                /* info->mon_data.ser_param = tty->termios->c_cflag; */
-
                 status = mxser_get_msr(info->ioaddr, 1, tty->index);
                 mxser_check_modem_status(info, status);
 
@@ -1944,7 +1891,6 @@ static void mxser_stoprx(struct tty_struct *tty)
 
         info->ldisc_stop_rx = 1;
         if (I_IXOFF(tty)) {
-                /* following add by Victor Yu. 09-02-2002 */
                 if (info->board->chip_flag) {
                         info->IER &= ~MOXA_MUST_RECV_ISR;
                         outb(info->IER, info->ioaddr + UART_IER);
@@ -1981,7 +1927,6 @@ static void mxser_unthrottle(struct tty_struct *tty)
                 if (info->x_char)
                         info->x_char = 0;
                 else {
-                        /* following add by Victor Yu. 09-02-2002 */
                         if (info->board->chip_flag) {
                                 info->IER |= MOXA_MUST_RECV_ISR;
                                 outb(info->IER, info->ioaddr + UART_IER);
@@ -2025,8 +1970,7 @@ static void mxser_start(struct tty_struct *tty)
         unsigned long flags;
 
         spin_lock_irqsave(&info->slock, flags);
-        if (info->xmit_cnt && info->xmit_buf
-                        /* && !(info->IER & UART_IER_THRI) */) {
+        if (info->xmit_cnt && info->xmit_buf) {
                 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
                 info->IER |= UART_IER_THRI;
                 outb(info->IER, info->ioaddr + UART_IER);
@@ -2051,18 +1995,16 @@ static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termio
                 }
         }
 
-/* Handle sw stopped */
+        /* Handle sw stopped */
         if ((old_termios->c_iflag & IXON) &&
                         !(tty->termios->c_iflag & IXON)) {
                 tty->stopped = 0;
 
-                /* following add by Victor Yu. 09-02-2002 */
                 if (info->board->chip_flag) {
                         spin_lock_irqsave(&info->slock, flags);
                         DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->ioaddr);
                         spin_unlock_irqrestore(&info->slock, flags);
                 }
-                /* above add by Victor Yu. 09-02-2002 */
 
                 mxser_start(tty);
         }
@@ -2131,7 +2073,6 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
 #endif
 }
 
-
 /*
  * This routine is called by tty_hangup() when a hangup is signaled.
  */
@@ -2148,8 +2089,6 @@ void mxser_hangup(struct tty_struct *tty)
         wake_up_interruptible(&info->open_wait);
 }
 
-
-/* added by James 03-12-2004. */
 /*
  * mxser_rs_break() --- routine which turns the break handling on or off
  */
@@ -2168,8 +2107,6 @@ static void mxser_rs_break(struct tty_struct *tty, int break_state)
         spin_unlock_irqrestore(&info->slock, flags);
 }
 
-/* (above) added by James. */
-
 static void mxser_receive_chars(struct mxser_port *port, int *status)
 {
         struct tty_struct *tty = port->tty;
@@ -2183,36 +2120,26 @@ static void mxser_receive_chars(struct mxser_port *port, int *status)
         spin_lock_irqsave(&port->slock, flags);
 
         recv_room = tty->receive_room;
-        if ((recv_room == 0) && (!port->ldisc_stop_rx)) {
-                /* mxser_throttle(tty); */
+        if ((recv_room == 0) && (!port->ldisc_stop_rx))
                 mxser_stoprx(tty);
-                /* return; */
-        }
 
-        /* following add by Victor Yu. 09-02-2002 */
         if (port->board->chip_flag != MOXA_OTHER_UART) {
 
                 if (*status & UART_LSR_SPECIAL)
                         goto intr_old;
-                /* following add by Victor Yu. 02-11-2004 */
                 if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
                                 (*status & MOXA_MUST_LSR_RERR))
                         goto intr_old;
-                /* above add by Victor Yu. 02-14-2004 */
                 if (*status & MOXA_MUST_LSR_RERR)
                         goto intr_old;
 
                 gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
 
-                /* add by Victor Yu. 02-11-2004 */
                 if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
                         gdl &= MOXA_MUST_GDL_MASK;
                 if (gdl >= recv_room) {
-                        if (!port->ldisc_stop_rx) {
-                                /* mxser_throttle(tty); */
+                        if (!port->ldisc_stop_rx)
                                 mxser_stoprx(tty);
-                        }
-                        /* return; */
                 }
                 while (gdl--) {
                         ch = inb(port->ioaddr + UART_RX);
@@ -2221,20 +2148,16 @@ static void mxser_receive_chars(struct mxser_port *port, int *status)
                 }
                 goto end_intr;
         }
- intr_old:
-        /* above add by Victor Yu. 09-02-2002 */
+intr_old:
 
         do {
                 if (max-- < 0)
                         break;
 
                 ch = inb(port->ioaddr + UART_RX);
-                /* following add by Victor Yu. 09-02-2002 */
-                if (port->board->chip_flag && (*status & UART_LSR_OE)
-                                /*&& !(*status&UART_LSR_DR) */)
+                if (port->board->chip_flag && (*status & UART_LSR_OE))
                         outb(0x23, port->ioaddr + UART_FCR);
                 *status &= port->read_status_mask;
-                /* above add by Victor Yu. 09-02-2002 */
                 if (*status & port->ignore_status_mask) {
                         if (++ignored > 100)
                                 break;
@@ -2243,50 +2166,38 @@ static void mxser_receive_chars(struct mxser_port *port, int *status)
                         if (*status & UART_LSR_SPECIAL) {
                                 if (*status & UART_LSR_BI) {
                                         flag = TTY_BREAK;
-/* added by casper 1/11/2000 */
                                         port->icount.brk++;
 
                                         if (port->flags & ASYNC_SAK)
                                                 do_SAK(tty);
                                 } else if (*status & UART_LSR_PE) {
                                         flag = TTY_PARITY;
-/* added by casper 1/11/2000 */
                                         port->icount.parity++;
                                 } else if (*status & UART_LSR_FE) {
                                         flag = TTY_FRAME;
-/* added by casper 1/11/2000 */
                                         port->icount.frame++;
                                 } else if (*status & UART_LSR_OE) {
                                         flag = TTY_OVERRUN;
-/* added by casper 1/11/2000 */
                                         port->icount.overrun++;
                                 }
                         }
                         tty_insert_flip_char(tty, ch, flag);
                         cnt++;
                         if (cnt >= recv_room) {
-                                if (!port->ldisc_stop_rx) {
-                                        /* mxser_throttle(tty); */
+                                if (!port->ldisc_stop_rx)
                                         mxser_stoprx(tty);
-                                }
                                 break;
                         }
 
                 }
 
-                /* following add by Victor Yu. 09-02-2002 */
                 if (port->board->chip_flag)
                         break;
 
-                /* mask by Victor Yu. 09-02-2002
-                 *status = inb(port->ioaddr + UART_LSR) & port->read_status_mask;
-                 */
-                /* following add by Victor Yu. 09-02-2002 */
                 *status = inb(port->ioaddr + UART_LSR);
-                /* above add by Victor Yu. 09-02-2002 */
         } while (*status & UART_LSR_DR);
 
-end_intr:               /* add by Victor Yu. 09-02-2002 */
+end_intr:
         mxvar_log.rxcnt[port->tty->index] += cnt;
         port->mon_data.rxcnt += cnt;
         port->mon_data.up_rxcnt += cnt;
@@ -2308,8 +2219,6 @@ static void mxser_transmit_chars(struct mxser_port *port)
                 mxvar_log.txcnt[port->tty->index]++;
                 port->mon_data.txcnt++;
                 port->mon_data.up_txcnt++;
-
-/* added by casper 1/11/2000 */
                 port->icount.tx++;
                 goto unlock;
         }
@@ -2337,11 +2246,8 @@ static void mxser_transmit_chars(struct mxser_port *port)
         } while (--count > 0);
         mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt);
 
-/* added by James 03-12-2004. */
         port->mon_data.txcnt += (cnt - port->xmit_cnt);
         port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
-
-/* added by casper 1/11/2000 */
         port->icount.tx += (cnt - port->xmit_cnt);
 
         if (port->xmit_cnt < WAKEUP_CHARS) {
@@ -2369,8 +2275,6 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
         unsigned int int_cnt;
         int handled = IRQ_NONE;
 
-        /* spin_lock(&gm_lock); */
-
         for (i = 0; i < MXSER_BOARDS; i++)
                 if (dev_id == &mxser_boards[i]) {
                         brd = dev_id;
@@ -2397,7 +2301,6 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
                         int_cnt = 0;
                         do {
-                                /* following add by Victor Yu. 09-13-2002 */
                                 iir = inb(port->ioaddr + UART_IIR);
                                 if (iir & UART_IIR_NO_INT)
                                         break;
@@ -2408,9 +2311,7 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                         inb(port->ioaddr + UART_MSR);
                                         break;
                                 }
-                                /* above add by Victor Yu. 09-13-2002 */
 
-                                /* following add by Victor Yu. 09-02-2002 */
                                 status = inb(port->ioaddr + UART_LSR);
 
                                 if (status & UART_LSR_PE)
@@ -2424,12 +2325,6 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                         port->err_shadow |= NPPI_NOTIFY_BREAK;
 
                                 if (port->board->chip_flag) {
-                                        /*
-                                           if ( (status & 0x02) && !(status & 0x01) ) {
-                                           outb(port->ioaddr+UART_FCR,  0x23);
-                                           continue;
-                                           }
-                                         */
                                         if (iir == MOXA_MUST_IIR_GDA ||
                                             iir == MOXA_MUST_IIR_RDA ||
                                             iir == MOXA_MUST_IIR_RTO ||
@@ -2438,8 +2333,6 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                                                 &status);
 
                                 } else {
-                                        /* above add by Victor Yu. 09-02-2002 */
-
                                         status &= port->read_status_mask;
                                         if (status & UART_LSR_DR)
                                                 mxser_receive_chars(port,
@@ -2449,14 +2342,11 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                                 if (msr & UART_MSR_ANY_DELTA)
                                         mxser_check_modem_status(port, msr);
 
-                                /* following add by Victor Yu. 09-13-2002 */
                                 if (port->board->chip_flag) {
                                         if (iir == 0x02 && (status &
                                                                 UART_LSR_THRE))
                                                 mxser_transmit_chars(port);
                                 } else {
-                                        /* above add by Victor Yu. 09-13-2002 */
-
                                         if (status & UART_LSR_THRE)
                                                 mxser_transmit_chars(port);
                                 }
@@ -2466,8 +2356,7 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
                         break;  /* Prevent infinite loops */
         }
 
-      irq_stop:
-        /* spin_unlock(&gm_lock); */
+irq_stop:
         return handled;
 }
 
@@ -2639,10 +2528,10 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
         for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
                 if (regs[12] & bits) {
                         brd->ports[i].baud_base = 921600;
-                        brd->ports[i].max_baud = 921600;        /* add by Victor Yu. 09-04-2002 */
+                        brd->ports[i].max_baud = 921600;
                 } else {
                         brd->ports[i].baud_base = 115200;
-                        brd->ports[i].max_baud = 115200;        /* add by Victor Yu. 09-04-2002 */
+                        brd->ports[i].max_baud = 115200;
                 }
         }
         scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);