[PATCH] update OBSOLETE_OSS_DRIVER schedule and dependencies

Update the schedule for the removal of drivers depending on
OBSOLETE_OSS_DRIVER as follows:

- adjust OBSOLETE_OSS_DRIVER dependencie
- from the release of 2.6.16 till the release of 2.6.17:
  approx. two months for users to report problems with the ALSA
  drivers for the same hardware
- after the release of 2.6.17 (and before 2.6.18):
  remove the subset of drivers marked at OBSOLETE_OSS_DRIVER without
  known regressions in the ALSA drivers for the same hardware

Additionally, correct some OBSOLETE_OSS_DRIVER dependencies.
A rationale of the changes is in
  http://lkml.org/lkml/2006/1/28/135

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2 files changed, 8 insertions, 333 deletions

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 293fed113dff..421bcfff6ad2 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -25,8 +25,9 @@ Who:	Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:   drivers depending on OBSOLETE_OSS_DRIVER
-When:   January 2006
+What:   drivers that were depending on OBSOLETE_OSS_DRIVER
+        (config options already removed)
+When:   before 2.6.19
 Why:    OSS drivers with ALSA replacements
 Who:    Adrian Bunk <bunk@stusta.de>
 
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 88e52dc84c09..f1ed710a18d7 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,23 +5,9 @@
 #
 # Prompt user for primary drivers.
 
-config OBSOLETE_OSS_DRIVER
-        bool "Obsolete OSS drivers"
-        depends on SOUND_PRIME
-        help
-          This option enables support for obsolete OSS drivers that
-          are scheduled for removal in the near future since there
-          are ALSA drivers for the same hardware.
-
-          Please contact Adrian Bunk <bunk@stusta.de> if you had to
-          say Y here because your soundcard is not properly supported
-          by ALSA.
-
-          If unsure, say N.
-
 config SOUND_BT878
         tristate "BT878 audio dma"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+        depends on SOUND_PRIME && PCI
         ---help---
           Audio DMA support for bt878 based grabber boards.  As you might have
           already noticed, bt878 is listed with two functions in /proc/pci.
@@ -35,48 +21,9 @@ config SOUND_BT878
           To compile this driver as a module, choose M here: the module will
           be called btaudio.
 
-config SOUND_CMPCI
-        tristate "C-Media PCI (CMI8338/8738)"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a PCI sound card using the CMI8338
-          or the CMI8738 chipset.  Data on these chips are available at
-          <http://www.cmedia.com.tw/>.
-
-          A userspace utility to control some internal registers of these
-          chips is available at
-          <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
-        bool "Enable legacy FM"
-        depends on SOUND_CMPCI && X86
-        help
-          Say Y here to enable the legacy FM (frequency-modulation) synthesizer
-          support on a card using the CMI8338 or CMI8378 chipset. Even it is
-          enabled, you need to set fmio as proper value to enable it.
-          Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
-        bool "Enable legacy MPU-401"
-        depends on SOUND_CMPCI && X86
-        help
-          Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
-          card using the CMI8338 or CMI8378 chipset. Even it is enabled,
-          you need to set mpuio as proper value to enable it.
-          Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
-        bool "Enable joystick"
-        depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
-        help
-          Say Y here in order to enable the joystick port on a sound card using
-          the CMI8338 or the CMI8738 chipset.  You need to config the
-          gameport support and set joystick parameter as 1 to use it.
-          Say N here if you don't need this.
-
 config SOUND_EMU10K1
         tristate "Creative SBLive! (EMU10K1)"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+        depends on SOUND_PRIME && PCI
         ---help---
           Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
           such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -108,13 +55,6 @@ config SOUND_FUSION
           series) when wired as native sound drivers with AC97 codecs.  If
           this driver does not work try the CS4232 driver.
 
-config SOUND_CS4281
-        tristate "Crystal Sound CS4281"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Picture and feature list at
-          <http://www.pcbroker.com/crystal4281.html>.
-
 config SOUND_BCM_CS4297A
         tristate "Crystal Sound CS4297a (for Swarm)"
         depends on SOUND_PRIME && SIBYTE_SWARM
@@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A
           note that CONFIG_KGDB should not be enabled at the same
           time, since it also attempts to use this UART port.
 
-config SOUND_ES1370
-        tristate "Ensoniq AudioPCI (ES1370)"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a PCI sound card utilizing the Ensoniq
-          ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
-          out if your sound card uses an ES1370 without removing your
-          computer's cover, use lspci -n and look for the PCI ID
-          1274:5000. Since Ensoniq was bought by Creative Labs,
-          Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
-          This driver differs slightly from OSS/Free, so PLEASE READ
-          <file:Documentation/sound/oss/es1370>.
-
 config SOUND_ES1371
         tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+        depends on SOUND_PRIME && PCI
         help
           Say Y or M if you have a PCI sound card utilizing the Ensoniq
           ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -151,33 +78,6 @@ config SOUND_ES1371
           slightly from OSS/Free, so PLEASE READ
           <file:Documentation/sound/oss/es1371>.
 
-config SOUND_ESSSOLO1
-        tristate "ESS Technology Solo1" 
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a PCI sound card utilizing the ESS Technology
-          Solo1 chip. To find out if your sound card uses a
-          Solo1 chip without removing your computer's cover, use
-          lspci -n and look for the PCI ID 125D:1969. This driver
-          differs slightly from OSS/Free, so PLEASE READ
-          <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
-        tristate "ESS Maestro, Maestro2, Maestro2E driver"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a sound system driven by ESS's Maestro line
-          of PCI sound chips.  These include the Maestro 1, Maestro 2, and
-          Maestro 2E.  See <file:Documentation/sound/oss/Maestro> for more
-          details.
-
-config SOUND_MAESTRO3
-        tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
-        depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a sound system driven by ESS's Maestro 3
-          PCI sound chip.
-
 config SOUND_ICH
         tristate "Intel ICH (i8xx) audio support"
         depends on SOUND_PRIME && PCI
@@ -185,24 +85,6 @@ config SOUND_ICH
           Support for integral audio in Intel's I/O Controller Hub (ICH)
           chipset, as used on the 810/820/840 motherboards.
 
-config SOUND_HARMONY
-        tristate "PA Harmony audio driver"
-        depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
-        help
-          Say 'Y' or 'M' to include support for Harmony soundchip
-          on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
-        tristate "S3 SonicVibes"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a PCI sound card utilizing the S3
-          SonicVibes chipset. To find out if your sound card uses a
-          SonicVibes chip without removing your computer's cover, use
-          lspci -n and look for the PCI ID 5333:CA00. This driver
-          differs slightly from OSS/Free, so PLEASE READ
-          <file:Documentation/sound/oss/sonicvibes>.
-
 config SOUND_VWSND
         tristate "SGI Visual Workstation Sound"
         depends on SOUND_PRIME && X86_VISWS
@@ -231,10 +113,6 @@ config SOUND_VRC5477
           integrated, multi-function controller chip for MIPS CPUs.  Works
           with the AC97 codec.
 
-config SOUND_AU1000
-        tristate "Au1000 Sound"
-        depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
-
 config SOUND_AU1550_AC97
         tristate "Au1550 AC97 Sound"
         depends on SOUND_PRIME && SOC_AU1550
@@ -505,26 +383,6 @@ config MSND_FIFOSIZE
           and Pinnacle). Larger values reduce the chance of data overruns at
           the expense of overall latency. If unsure, use the default.
 
-config SOUND_VIA82CXXX
-        tristate "VIA 82C686 Audio Codec"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y here to include support for the audio codec found on VIA
-          82Cxxx-based chips. Typically these are built into a motherboard.
-
-          DO NOT select Sound Blaster or Adlib with this driver, unless
-          you have a Sound Blaster or Adlib card in addition to your VIA
-          audio chip.
-
-config MIDI_VIA82CXXX
-        bool "VIA 82C686 MIDI"
-        depends on SOUND_VIA82CXXX && ISA_DMA_API
-        help
-          Answer Y to use the MIDI interface of the Via686. You may need to
-          enable this in the BIOS before it will work. This is for connection
-          to external MIDI hardware, and is not required for software playback
-          of MIDI files.
-
 config SOUND_OSS
         tristate "OSS sound modules"
         depends on SOUND_PRIME && ISA_DMA_API
@@ -576,18 +434,6 @@ config SOUND_AD1889
           Say M here if you have a sound card based on the Analog Devices
           AD1889 chip.
 
-config SOUND_SGALAXY
-        tristate "Aztech Sound Galaxy (non-PnP) cards"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          This module initializes the older non Plug and Play sound galaxy
-          cards from Aztech. It supports the Waverider Pro 32 - 3D and the
-          Galaxy Washington 16.
-
-          If you compile the driver into the kernel, you have to add
-          "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
-          line.
-
 config SOUND_ADLIB
         tristate "Adlib Cards"
         depends on SOUND_OSS
@@ -612,56 +458,6 @@ config SOUND_ACI_MIXER
 
           This driver is also available as a module and will be called aci.
 
-config SOUND_CS4232
-        tristate "Crystal CS4232 based (PnP) cards"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Say Y here if you have a card based on the Crystal CS4232 chip set,
-          which uses its own Plug and Play protocol.
-
-          If you compile the driver into the kernel, you have to add
-          "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-          command line.
-
-          See <file:Documentation/sound/oss/CS4232> for more information on
-          configuring this card.
-
-config SOUND_SSCAPE
-        tristate "Ensoniq SoundScape support"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Answer Y if you have a sound card based on the Ensoniq SoundScape
-          chipset. Such cards are being manufactured at least by Ensoniq, Spea
-          and Reveal (Reveal makes also other cards).
-
-          If you compile the driver into the kernel, you have to add
-          "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
-          line.
-
-config SOUND_GUS
-        tristate "Gravis Ultrasound support"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Say Y here for any type of Gravis Ultrasound card, including the GUS
-          or GUS MAX.  See also <file:Documentation/sound/oss/ultrasound> for more
-          information on configuring this card with modules.
-
-          If you compile the driver into the kernel, you have to add
-          "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
-        bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
-        depends on SOUND_GUS
-        help
-          Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
-          sampling at 16-bit width.
-
-config SOUND_GUSMAX
-        bool "GUS MAX support"
-        depends on SOUND_GUS
-        help
-          Support for Gravis Ulstrasound MAX.
-
 config SOUND_VMIDI
         tristate "Loopback MIDI device support"
         depends on SOUND_OSS
@@ -742,7 +538,7 @@ config SOUND_MPU401
 
 config SOUND_NM256
         tristate "NM256AV/NM256ZX audio support"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+        depends on SOUND_OSS
         help
           Say M here to include audio support for the NeoMagic 256AV/256ZX
           chipsets. These are the audio chipsets found in the Sony
@@ -752,35 +548,6 @@ config SOUND_NM256
 
           See <file:Documentation/sound/oss/NM256> for further information.
 
-config SOUND_MAD16
-        tristate "OPTi MAD16 and/or Mozart based cards"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        ---help---
-          Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
-          82C928 or 82C929 or 82C931) audio interface chip. These chips are
-          quite common so it's possible that many no-name cards have one of
-          them. In addition the MAD16 chip is used in some cards made by known
-          manufacturers such as Turtle Beach (Tropez), Reveal (some models)
-          and Diamond (latest ones). Note however that the Tropez sound cards
-          have their own driver; if you have one of those, say N here and Y or
-          M to "Full support for Turtle Beach WaveFront", below.
-
-          If you compile the driver into the kernel, you have to add
-          "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
-          kernel command line.
-
-          See also <file:Documentation/sound/oss/Opti> and
-          <file:Documentation/sound/oss/MAD16> for more information on setting
-          these cards up as modules.
-
-config MAD16_OLDCARD
-        bool "Support MIDI in older MAD16 based cards (requires SB)"
-        depends on SOUND_MAD16
-        help
-          Answer Y (or M) if you have an older card based on the C928 or
-          Mozart chipset and you want to have MIDI support. If you enable this
-          option you also need to enable support for Sound Blaster.
-
 config SOUND_PAS
         tristate "ProAudioSpectrum 16 support"
         depends on SOUND_OSS
@@ -873,53 +640,9 @@ config SOUND_SB
           You can say M here to compile this driver as a module; the module is
           called sb.
 
-config SOUND_AWE32_SYNTH
-        tristate "AWE32 synth"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
-          similar sound card. See <file:Documentation/sound/oss/README.awe>,
-          <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
-          mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-          for more info.
-
-config SOUND_WAVEFRONT
-        tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
-        depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
-        help
-          Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
-          and read the files <file:Documentation/sound/oss/Wavefront> and
-          <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
-        tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
-          sound card.
-
-          If you compile the driver into the kernel, you have to add
-          "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
-        bool "Have OSWF.MOT firmware file"
-        depends on SOUND_MAUI=y && !STANDALONE
-        help
-          Turtle Beach Maui and Tropez sound cards have a microcontroller
-          which needs to be initialized prior to use. OSWF.MOT is a file
-          distributed with the card's DOS/Windows drivers. Answer Y if you
-          have this file.
-
-config MAUI_BOOT_FILE
-        string "Full pathname of OSWF.MOT firmware file"
-        depends on MAUI_HAVE_BOOT
-        default "/etc/sound/oswf.mot"
-        help
-          Enter the full pathname of your OSWF.MOT file, starting from /.
-
 config SOUND_YM3812
         tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+        depends on SOUND_OSS
         ---help---
           Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
           Answering Y is usually a safe and recommended choice, however some
@@ -933,18 +656,6 @@ config SOUND_YM3812
 
           If unsure, say Y.
 
-config SOUND_OPL3SA1
-        tristate "Yamaha OPL3-SA1 audio controller"
-        depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
-          usually built into motherboards. Read
-          <file:Documentation/sound/oss/OPL3-SA> for details.
-
-          If you compile the driver into the kernel, you have to add
-          "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-          command line.
-
 config SOUND_OPL3SA2
         tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
         depends on SOUND_OSS
@@ -959,19 +670,6 @@ config SOUND_OPL3SA2
           "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
           command line.
 
-config SOUND_YMFPCI
-        tristate "Yamaha YMF7xx PCI audio (native mode)"
-        depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Support for Yamaha cards including the YMF711, YMF715, YMF718,
-          YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
-        bool "Yamaha PCI legacy ports support"
-        depends on SOUND_YMFPCI
-        help
-          Support for YMF7xx PCI cards emulating an MP401.
-
 config SOUND_UART6850
         tristate "6850 UART support"
         depends on SOUND_OSS
@@ -1101,30 +799,6 @@ config SOUND_KAHLUA
         tristate "XpressAudio Sound Blaster emulation"
         depends on SOUND_SB
 
-config SOUND_ALI5455
-        tristate "ALi5455 audio support"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-
-config SOUND_FORTE
-        tristate "ForteMedia FM801 driver"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you want driver support for the ForteMedia FM801 PCI
-          audio controller (Abit AU10, Genius Sound Maker, HP Workstation
-          zx2000, and others).
-
-config SOUND_RME96XX
-        tristate "RME Hammerfall (RME96XX) support"
-        depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-        help
-          Say Y or M if you have a Hammerfall or Hammerfall light
-          multichannel card from RME. If you want to access advanced
-          features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
-        tristate "AD1980 front/back switch plugin"
-        depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
-
 config SOUND_SH_DAC_AUDIO
         tristate "SuperH DAC audio support"
         depends on SOUND_PRIME && CPU_SH3