Merge master.kernel.org:/home/rmk/linux-2.6-arm

27 files changed, 385 insertions, 554 deletions

diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 4c38bd8bc298..b713c44c6fb4 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -30,9 +30,6 @@ extern void __lshrdi3(void);
 extern void __modsi3(void);
 extern void __muldi3(void);
 extern void __ucmpdi2(void);
-extern void __udivdi3(void);
-extern void __umoddi3(void);
-extern void __udivmoddi4(void);
 extern void __udivsi3(void);
 extern void __umodsi3(void);
 extern void __do_div64(void);
@@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(__modsi3);
 EXPORT_SYMBOL(__muldi3);
 EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivdi3);
-EXPORT_SYMBOL(__umoddi3);
-EXPORT_SYMBOL(__udivmoddi4);
 EXPORT_SYMBOL(__udivsi3);
 EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(__do_div64);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8cf733daa800..35b7273cfdb4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -359,7 +359,8 @@ void cpu_init(void)
               "I" (offsetof(struct stack, abt[0])),
               "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
               "I" (offsetof(struct stack, und[0])),
-              "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+              "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+            : "r14");
 }
 
 static struct machine_desc * __init setup_machine(unsigned int nr)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 34892758f098..a931409c8fe4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -502,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier)
 {
         return -EINVAL;
 }
+
+static int
+on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
+                 cpumask_t mask)
+{
+        int ret = 0;
+
+        preempt_disable();
+
+        ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+        if (cpu_isset(smp_processor_id(), mask))
+                func(info);
+
+        preempt_enable();
+
+        return ret;
+}
+
+/**********************************************************************/
+
+/*
+ * TLB operations
+ */
+struct tlb_args {
+        struct vm_area_struct *ta_vma;
+        unsigned long ta_start;
+        unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+        local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *arg)
+{
+        struct mm_struct *mm = (struct mm_struct *)arg;
+
+        local_flush_tlb_mm(mm);
+}
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+        struct tlb_args *ta = (struct tlb_args *)arg;
+
+        local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_kernel_page(void *arg)
+{
+        struct tlb_args *ta = (struct tlb_args *)arg;
+
+        local_flush_tlb_kernel_page(ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+        struct tlb_args *ta = (struct tlb_args *)arg;
+
+        local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+        struct tlb_args *ta = (struct tlb_args *)arg;
+
+        local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+        on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+        cpumask_t mask = mm->cpu_vm_mask;
+
+        on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+        cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+        struct tlb_args ta;
+
+        ta.ta_vma = vma;
+        ta.ta_start = uaddr;
+
+        on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_page(unsigned long kaddr)
+{
+        struct tlb_args ta;
+
+        ta.ta_start = kaddr;
+
+        on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+                     unsigned long start, unsigned long end)
+{
+        cpumask_t mask = vma->vm_mm->cpu_vm_mask;
+        struct tlb_args ta;
+
+        ta.ta_vma = vma;
+        ta.ta_start = start;
+        ta.ta_end = end;
+
+        on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+        struct tlb_args ta;
+
+        ta.ta_start = start;
+        ta.ta_end = end;
+
+        on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index c0e65833ffc4..8725d63e4219 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
                    strnlen_user.o strchr.o strrchr.o testchangebit.o  \
                    testclearbit.o testsetbit.o uaccess.o getuser.o    \
                    putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o   \
-                   ucmpdi2.o udivdi3.o lib1funcs.o div64.o            \
+                   ucmpdi2.o lib1funcs.o div64.o                      \
                    io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h
deleted file mode 100644
index 90ae647e4d76..000000000000
--- a/arch/arm/lib/longlong.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* longlong.h -- based on code from gcc-2.95.3
-
-   definitions for mixed size 32/64 bit arithmetic.
-   Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc.
-
-   This definition file is free software; you can redistribute it
-   and/or modify it under the terms of the GNU General Public
-   License as published by the Free Software Foundation; either
-   version 2, or (at your option) any later version.
-
-   This definition file is distributed in the hope that it will be
-   useful, but WITHOUT ANY WARRANTY; without even the implied
-   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-   See the GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */
-
-#ifndef SI_TYPE_SIZE
-#define SI_TYPE_SIZE 32
-#endif
-
-#define __BITS4 (SI_TYPE_SIZE / 4)
-#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((u32) (t) % __ll_B)
-#define __ll_highpart(t) ((u32) (t) / __ll_B)
-
-/* Define auxiliary asm macros.
-
-   1) umul_ppmm(high_prod, low_prod, multipler, multiplicand)
-   multiplies two u32 integers MULTIPLER and MULTIPLICAND,
-   and generates a two-part u32 product in HIGH_PROD and
-   LOW_PROD.
-
-   2) __umulsidi3(a,b) multiplies two u32 integers A and B,
-   and returns a u64 product.  This is just a variant of umul_ppmm.
-
-   3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator) divides a two-word unsigned integer, composed by the
-   integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and
-   places the quotient in QUOTIENT and the remainder in REMAINDER.
-   HIGH_NUMERATOR must be less than DENOMINATOR for correct operation.
-   If, in addition, the most significant bit of DENOMINATOR must be 1,
-   then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1.
-
-   4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
-   denominator).  Like udiv_qrnnd but the numbers are signed.  The
-   quotient is rounded towards 0.
-
-   5) count_leading_zeros(count, x) counts the number of zero-bits from
-   the msb to the first non-zero bit.  This is the number of steps X
-   needs to be shifted left to set the msb.  Undefined for X == 0.
-
-   6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
-   high_addend_2, low_addend_2) adds two two-word unsigned integers,
-   composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and
-   LOW_ADDEND_2 respectively.  The result is placed in HIGH_SUM and
-   LOW_SUM.  Overflow (i.e. carry out) is not stored anywhere, and is
-   lost.
-
-   7) sub_ddmmss(high_difference, low_difference, high_minuend,
-   low_minuend, high_subtrahend, low_subtrahend) subtracts two
-   two-word unsigned integers, composed by HIGH_MINUEND_1 and
-   LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2
-   respectively.  The result is placed in HIGH_DIFFERENCE and
-   LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
-   and is lost.
-
-   If any of these macros are left undefined for a particular CPU,
-   C macros are used.  */
-
-#if defined (__arm__)
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-  __asm__ ("adds        %1, %4, %5                                      \n\
-        adc     %0, %2, %3"                                             \
-           : "=r" ((u32) (sh)),                                 \
-             "=&r" ((u32) (sl))                                 \
-           : "%r" ((u32) (ah)),                                 \
-             "rI" ((u32) (bh)),                                 \
-             "%r" ((u32) (al)),                                 \
-             "rI" ((u32) (bl)))
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-  __asm__ ("subs        %1, %4, %5                                      \n\
-        sbc     %0, %2, %3"                                             \
-           : "=r" ((u32) (sh)),                                 \
-             "=&r" ((u32) (sl))                                 \
-           : "r" ((u32) (ah)),                                  \
-             "rI" ((u32) (bh)),                                 \
-             "r" ((u32) (al)),                                  \
-             "rI" ((u32) (bl)))
-#define umul_ppmm(xh, xl, a, b) \
-{register u32 __t0, __t1, __t2;                                 \
-  __asm__ ("%@ Inlined umul_ppmm                                        \n\
-        mov     %2, %5, lsr #16                                         \n\
-        mov     %0, %6, lsr #16                                         \n\
-        bic     %3, %5, %2, lsl #16                                     \n\
-        bic     %4, %6, %0, lsl #16                                     \n\
-        mul     %1, %3, %4                                              \n\
-        mul     %4, %2, %4                                              \n\
-        mul     %3, %0, %3                                              \n\
-        mul     %0, %2, %0                                              \n\
-        adds    %3, %4, %3                                              \n\
-        addcs   %0, %0, #65536                                          \n\
-        adds    %1, %1, %3, lsl #16                                     \n\
-        adc     %0, %0, %3, lsr #16"                                    \
-           : "=&r" ((u32) (xh)),                                        \
-             "=r" ((u32) (xl)),                                 \
-             "=&r" (__t0), "=&r" (__t1), "=r" (__t2)                    \
-           : "r" ((u32) (a)),                                   \
-             "r" ((u32) (b)));}
-#define UMUL_TIME 20
-#define UDIV_TIME 100
-#endif                          /* __arm__ */
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;                                                        \
-    umul_ppmm (__w.s.high, __w.s.low, u, v);                            \
-    __w.ll; })
-
-#define __udiv_qrnnd_c(q, r, n1, n0, d) \
-  do {                                                                  \
-    u32 __d1, __d0, __q1, __q0;                                 \
-    u32 __r1, __r0, __m;                                                \
-    __d1 = __ll_highpart (d);                                           \
-    __d0 = __ll_lowpart (d);                                            \
-                                                                        \
-    __r1 = (n1) % __d1;                                                 \
-    __q1 = (n1) / __d1;                                                 \
-    __m = (u32) __q1 * __d0;                                    \
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);                          \
-    if (__r1 < __m)                                                     \
-      {                                                                 \
-        __q1--, __r1 += (d);                                            \
-        if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
-          if (__r1 < __m)                                               \
-            __q1--, __r1 += (d);                                        \
-      }                                                                 \
-    __r1 -= __m;                                                        \
-                                                                        \
-    __r0 = __r1 % __d1;                                                 \
-    __q0 = __r1 / __d1;                                                 \
-    __m = (u32) __q0 * __d0;                                    \
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);                           \
-    if (__r0 < __m)                                                     \
-      {                                                                 \
-        __q0--, __r0 += (d);                                            \
-        if (__r0 >= (d))                                                \
-          if (__r0 < __m)                                               \
-            __q0--, __r0 += (d);                                        \
-      }                                                                 \
-    __r0 -= __m;                                                        \
-                                                                        \
-    (q) = (u32) __q1 * __ll_B | __q0;                           \
-    (r) = __r0;                                                         \
-  } while (0)
-
-#define UDIV_NEEDS_NORMALIZATION 1
-#define udiv_qrnnd __udiv_qrnnd_c
-
-#define count_leading_zeros(count, x) \
-  do {                                                                  \
-    u32 __xr = (x);                                                     \
-    u32 __a;                                                    \
-                                                                        \
-    if (SI_TYPE_SIZE <= 32)                                             \
-      {                                                                 \
-        __a = __xr < ((u32)1<<2*__BITS4)                                \
-          ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4)            \
-          : (__xr < ((u32)1<<3*__BITS4) ?  2*__BITS4 : 3*__BITS4);      \
-      }                                                                 \
-    else                                                                \
-      {                                                                 \
-        for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8)                 \
-          if (((__xr >> __a) & 0xff) != 0)                              \
-            break;                                                      \
-      }                                                                 \
-                                                                        \
-    (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a);            \
-  } while (0)
diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c
deleted file mode 100644
index e343be4c6642..000000000000
--- a/arch/arm/lib/udivdi3.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/* More subroutines needed by GCC output code on some machines.  */
-/* Compile this one with gcc.  */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-/* As a special exception, if you link this library with other files,
-   some of which are compiled with GCC, to produce an executable,
-   this library does not by itself cause the resulting executable
-   to be covered by the GNU General Public License.
-   This exception does not however invalidate any other reasons why
-   the executable file might be covered by the GNU General Public License.
- */
-/* support functions required by the kernel. based on code from gcc-2.95.3 */
-/* I Molton     29/07/01 */
-
-#include "gcclib.h"
-#include "longlong.h"
-
-static const u8 __clz_tab[] = {
-        0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
-            5, 5, 5, 5, 5, 5, 5, 5,
-        6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-            6, 6, 6, 6, 6, 6, 6, 6,
-        7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-            7, 7, 7, 7, 7, 7, 7, 7,
-        7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-            7, 7, 7, 7, 7, 7, 7, 7,
-        8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-            8, 8, 8, 8, 8, 8, 8, 8,
-        8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-            8, 8, 8, 8, 8, 8, 8, 8,
-        8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-            8, 8, 8, 8, 8, 8, 8, 8,
-        8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
-            8, 8, 8, 8, 8, 8, 8, 8,
-};
-
-u64 __udivmoddi4(u64 n, u64 d, u64 * rp)
-{
-        DIunion ww;
-        DIunion nn, dd;
-        DIunion rr;
-        u32 d0, d1, n0, n1, n2;
-        u32 q0, q1;
-        u32 b, bm;
-
-        nn.ll = n;
-        dd.ll = d;
-
-        d0 = dd.s.low;
-        d1 = dd.s.high;
-        n0 = nn.s.low;
-        n1 = nn.s.high;
-
-        if (d1 == 0) {
-                if (d0 > n1) {
-                        /* 0q = nn / 0D */
-
-                        count_leading_zeros(bm, d0);
-
-                        if (bm != 0) {
-                                /* Normalize, i.e. make the most significant bit of the
-                                   denominator set.  */
-
-                                d0 = d0 << bm;
-                                n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm));
-                                n0 = n0 << bm;
-                        }
-
-                        udiv_qrnnd(q0, n0, n1, n0, d0);
-                        q1 = 0;
-
-                        /* Remainder in n0 >> bm.  */
-                } else {
-                        /* qq = NN / 0d */
-
-                        if (d0 == 0)
-                                d0 = 1 / d0;    /* Divide intentionally by zero.  */
-
-                        count_leading_zeros(bm, d0);
-
-                        if (bm == 0) {
-                                /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
-                                   conclude (the most significant bit of n1 is set) /\ (the
-                                   leading quotient digit q1 = 1).
-
-                                   This special case is necessary, not an optimization.
-                                   (Shifts counts of SI_TYPE_SIZE are undefined.)  */
-
-                                n1 -= d0;
-                                q1 = 1;
-                        } else {
-                                /* Normalize.  */
-
-                                b = SI_TYPE_SIZE - bm;
-
-                                d0 = d0 << bm;
-                                n2 = n1 >> b;
-                                n1 = (n1 << bm) | (n0 >> b);
-                                n0 = n0 << bm;
-
-                                udiv_qrnnd(q1, n1, n2, n1, d0);
-                        }
-
-                        /* n1 != d0...  */
-
-                        udiv_qrnnd(q0, n0, n1, n0, d0);
-
-                        /* Remainder in n0 >> bm.  */
-                }
-
-                if (rp != 0) {
-                        rr.s.low = n0 >> bm;
-                        rr.s.high = 0;
-                        *rp = rr.ll;
-                }
-        } else {
-                if (d1 > n1) {
-                        /* 00 = nn / DD */
-
-                        q0 = 0;
-                        q1 = 0;
-
-                        /* Remainder in n1n0.  */
-                        if (rp != 0) {
-                                rr.s.low = n0;
-                                rr.s.high = n1;
-                                *rp = rr.ll;
-                        }
-                } else {
-                        /* 0q = NN / dd */
-
-                        count_leading_zeros(bm, d1);
-                        if (bm == 0) {
-                                /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
-                                   conclude (the most significant bit of n1 is set) /\ (the
-                                   quotient digit q0 = 0 or 1).
-
-                                   This special case is necessary, not an optimization.  */
-
-                                /* The condition on the next line takes advantage of that
-                                   n1 >= d1 (true due to program flow).  */
-                                if (n1 > d1 || n0 >= d0) {
-                                        q0 = 1;
-                                        sub_ddmmss(n1, n0, n1, n0, d1, d0);
-                                } else
-                                        q0 = 0;
-
-                                q1 = 0;
-
-                                if (rp != 0) {
-                                        rr.s.low = n0;
-                                        rr.s.high = n1;
-                                        *rp = rr.ll;
-                                }
-                        } else {
-                                u32 m1, m0;
-                                /* Normalize.  */
-
-                                b = SI_TYPE_SIZE - bm;
-
-                                d1 = (d1 << bm) | (d0 >> b);
-                                d0 = d0 << bm;
-                                n2 = n1 >> b;
-                                n1 = (n1 << bm) | (n0 >> b);
-                                n0 = n0 << bm;
-
-                                udiv_qrnnd(q0, n1, n2, n1, d1);
-                                umul_ppmm(m1, m0, q0, d0);
-
-                                if (m1 > n1 || (m1 == n1 && m0 > n0)) {
-                                        q0--;
-                                        sub_ddmmss(m1, m0, m1, m0, d1, d0);
-                                }
-
-                                q1 = 0;
-
-                                /* Remainder in (n1n0 - m1m0) >> bm.  */
-                                if (rp != 0) {
-                                        sub_ddmmss(n1, n0, n1, n0, m1, m0);
-                                        rr.s.low = (n1 << b) | (n0 >> bm);
-                                        rr.s.high = n1 >> bm;
-                                        *rp = rr.ll;
-                                }
-                        }
-                }
-        }
-
-        ww.s.low = q0;
-        ww.s.high = q1;
-        return ww.ll;
-}
-
-u64 __udivdi3(u64 n, u64 d)
-{
-        return __udivmoddi4(n, d, (u64 *) 0);
-}
-
-u64 __umoddi3(u64 u, u64 v)
-{
-        u64 w;
-
-        (void)__udivmoddi4(u, v, &w);
-
-        return w;
-}
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 9222e57bd872..dacbf504dae2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,6 +20,7 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/amba.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/arch/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control);
 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 #endif
 
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-        unsigned long TimerLoad;
-        unsigned long TimerValue;
-        unsigned long TimerControl;
-        unsigned long TimerClear;
-} TimerStruct_t;
-
 static unsigned long timer_reload;
 
 /*
@@ -174,7 +165,6 @@ static unsigned long timer_reload;
  */
 unsigned long integrator_gettimeoffset(void)
 {
-        volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE;
         unsigned long ticks1, ticks2, status;
 
         /*
@@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void)
          * an interrupt.  We get around this by ensuring that the
          * counter has not reloaded between our two reads.
          */
-        ticks2 = timer1->TimerValue & 0xffff;
+        ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
         do {
                 ticks1 = ticks2;
                 status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-                ticks2 = timer1->TimerValue & 0xffff;
+                ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
         } while (ticks2 > ticks1);
 
         /*
@@ -213,14 +203,12 @@ unsigned long integrator_gettimeoffset(void)
 static irqreturn_t
 integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-        volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-
         write_seqlock(&xtime_lock);
 
         /*
          * clear the interrupt
          */
-        timer1->TimerClear = 1;
+        writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
 
         /*
          * the clock tick routines are only processed on the
@@ -256,32 +244,29 @@ static struct irqaction integrator_timer_irq = {
  */
 void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
 {
-        volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-        volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-        volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-        unsigned int timer_ctrl = 0x80 | 0x40;  /* periodic */
+        unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
 
         timer_reload = reload;
         timer_ctrl |= ctrl;
 
         if (timer_reload > 0x100000) {
                 timer_reload >>= 8;
-                timer_ctrl |= 0x08; /* /256 */
+                timer_ctrl |= TIMER_CTRL_DIV256;
         } else if (timer_reload > 0x010000) {
                 timer_reload >>= 4;
-                timer_ctrl |= 0x04; /* /16 */
+                timer_ctrl |= TIMER_CTRL_DIV16;
         }
 
         /*
          * Initialise to a known state (all timers off)
          */
-        timer0->TimerControl = 0;
-        timer1->TimerControl = 0;
-        timer2->TimerControl = 0;
+        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 
-        timer1->TimerLoad    = timer_reload;
-        timer1->TimerValue   = timer_reload;
-        timer1->TimerControl = timer_ctrl;
+        writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
+        writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
+        writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
 
         /*
          * Make irqs happen for the system timer
diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c
index 00fac155df2a..6b03ccdc1e92 100644
--- a/arch/arm/mach-omap/pm.c
+++ b/arch/arm/mach-omap/pm.c
@@ -41,7 +41,9 @@
 #include <linux/pm.h>
 
 #include <asm/io.h>
+#include <asm/mach/time.h>
 #include <asm/mach-types.h>
+
 #include <asm/arch/omap16xx.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
@@ -80,13 +82,13 @@ void omap_pm_idle(void)
                 return;
         }
         mask32 = omap_readl(ARM_SYSST);
-        local_fiq_enable();
-        local_irq_enable();
 
-#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ)
-        /* Override timer to use VST for the next cycle */
-        omap_32k_timer_next_vst_interrupt();
-#endif
+        /*
+         * Since an interrupt may set up a timer, we don't want to
+         * reprogram the hardware timer with interrupts enabled.
+         * Re-enable interrupts only after returning from idle.
+         */
+        timer_dyn_reprogram();
 
         if ((mask32 & DSP_IDLE) == 0) {
                 __asm__ volatile ("mcr  p15, 0, r0, c7, c0, 4");
@@ -102,6 +104,8 @@ void omap_pm_idle(void)
 
                 func_ptr();
         }
+        local_fiq_enable();
+        local_irq_enable();
 }
 
 /*
diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c
index 589e8b2740dd..dd34e9f4c413 100644
--- a/arch/arm/mach-omap/time.c
+++ b/arch/arm/mach-omap/time.c
@@ -4,7 +4,7 @@
  * OMAP Timers
  *
  * Copyright (C) 2004 Nokia Corporation
- * Partial timer rewrite and additional VST timer support by
+ * Partial timer rewrite and additional dynamic tick timer support by
  * Tony Lindgen <tony@atomide.com> and
  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
@@ -261,7 +261,6 @@ unsigned long long sched_clock(void)
  * so with HZ = 100, TVR = 327.68.
  */
 #define OMAP_32K_TIMER_TICK_PERIOD      ((32768 / HZ) - 1)
-#define MAX_SKIP_JIFFIES                25
 #define TIMER_32K_SYNCHRONIZED          0xfffbc410
 
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)                     \
@@ -347,6 +346,42 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
         return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+/*
+ * Programs the next timer interrupt needed. Called when dynamic tick is
+ * enabled, and to reprogram the ticks to skip from pm_idle. Note that
+ * we can keep the timer continuous, and don't need to set it to run in
+ * one-shot mode. This is because the timer will get reprogrammed again
+ * after next interrupt.
+ */
+void omap_32k_timer_reprogram(unsigned long next_tick)
+{
+        omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1);
+}
+
+static struct irqaction omap_32k_timer_irq;
+extern struct timer_update_handler timer_update;
+
+static int omap_32k_timer_enable_dyn_tick(void)
+{
+        /* No need to reprogram timer, just use the next interrupt */
+        return 0;
+}
+
+static int omap_32k_timer_disable_dyn_tick(void)
+{
+        omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+        return 0;
+}
+
+static struct dyn_tick_timer omap_dyn_tick_timer = {
+        .enable         = omap_32k_timer_enable_dyn_tick,
+        .disable        = omap_32k_timer_disable_dyn_tick,
+        .reprogram      = omap_32k_timer_reprogram,
+        .handler        = omap_32k_timer_interrupt,
+};
+#endif  /* CONFIG_NO_IDLE_HZ */
+
 static struct irqaction omap_32k_timer_irq = {
         .name           = "32KHz timer",
         .flags          = SA_INTERRUPT | SA_TIMER,
@@ -355,6 +390,11 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
+
+#ifdef CONFIG_NO_IDLE_HZ
+        omap_timer.dyn_tick = &omap_dyn_tick_timer;
+#endif
+
         setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
         omap_timer.offset  = omap_32k_timer_gettimeoffset;
         omap_32k_last_tick = omap_32k_sync_timer_read();
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 534df0c6c770..d4d03d0daaec 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE
           the CRC data block will take more memory, but wil identify any
           faults with better precision.
 
+config PM_SIMTEC
+        bool
+        depends on PM && (ARCH_BAST || MACH_VR1000)
+        default y
+
 config S3C2410_LOWLEVEL_UART_PORT
         int "S3C2410 UART to use for low-level messages"
         default 0
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 7c379aad5d62..f99b689e4392 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA)  += dma.o
 # Power Management support
 
 obj-$(CONFIG_PM)           += pm.o sleep.o
+obj-$(CONFIG_PM_SIMTEC)    += pm-simtec.o
 
 # S3C2440 support
 
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 64792f678668..4664bd11adc1 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = {
         .num_resources    = ARRAY_SIZE(s3c_lcd_resource),
         .resource         = s3c_lcd_resource,
         .dev              = {
-                .dma_mask = &s3c_device_lcd_dmamask,
-                .coherent_dma_mask = 0xffffffffUL
+                .dma_mask               = &s3c_device_lcd_dmamask,
+                .coherent_dma_mask      = 0xffffffffUL
         }
 };
 
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index f3e970039b65..549bcb1f32c0 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -27,6 +27,7 @@
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
  *     14-Mar-2006 BJD  Updated for __iomem changes
  *     22-Jun-2006 BJD  Added DM9000 platform information
+ *     28-Jun-2006 BJD  Moved pm functionality out to common code
 */
 
 #include <linux/kernel.h>
@@ -67,7 +68,6 @@
 #include "devs.h"
 #include "cpu.h"
 #include "usb-simtec.h"
-#include "pm.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
 
@@ -405,44 +405,13 @@ void __init bast_map_io(void)
         usb_simtec_init();
 }
 
-void __init bast_init_irq(void)
-{
-        s3c24xx_init_irq();
-}
-
-#ifdef CONFIG_PM
-
-/* bast_init_machine
- *
- * enable the power management functions for the EB2410ITX
-*/
-
-static __init void bast_init_machine(void)
-{
-        unsigned long gstatus4;
-
-        printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n");
-
-        gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
-        gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
-        gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
-        __raw_writel(gstatus4, S3C2410_GSTATUS4);
-
-        s3c2410_pm_init();
-}
-
-#else
-#define bast_init_machine NULL
-#endif
-
 
 MACHINE_START(BAST, "Simtec-BAST")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(bast_map_io)
-     INITIRQ(bast_init_irq)
-        .init_machine   = bast_init_machine,
+
+        .map_io         = bast_map_io,
+        .init_irq       = s3c24xx_init_irq,
         .timer          = &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 76be074944a0..1db2855e3e56 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -371,16 +371,12 @@ void __init vr1000_map_io(void)
         usb_simtec_init();
 }
 
-void __init vr1000_init_irq(void)
-{
-        s3c24xx_init_irq();
-}
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
      MAINTAINER("Ben Dooks <ben@simtec.co.uk>")
      BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART)
      BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100)
-     MAPIO(vr1000_map_io)
-     INITIRQ(vr1000_init_irq)
+        .map_io         = vr1000_map_io,
+        .init_irq       = s3c24xx_init_irq,
         .timer          = &s3c24xx_timer,
 MACHINE_END
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
new file mode 100644
index 000000000000..2cb798832223
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * Power Management helpers for Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+
+#include <asm/mach-types.h>
+
+#include "pm.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+/* pm_simtec_init
+ *
+ * enable the power management functions
+*/
+
+static __init int pm_simtec_init(void)
+{
+        unsigned long gstatus4;
+
+        /* check which machine we are running on */
+
+        if (!machine_is_bast() && !machine_is_vr1000())
+                return 0;
+
+        printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
+
+        gstatus4  = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
+        gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
+        gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
+
+        __raw_writel(gstatus4, S3C2410_GSTATUS4);
+
+        return s3c2410_pm_init();
+}
+
+arch_initcall(pm_simtec_init);
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 9d1f2253e987..f01c0f8a2bb3 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/amba_clcd.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
@@ -788,38 +789,25 @@ void __init versatile_init(void)
  */
 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 #if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)           /* Divide by 256 */
-#define TIMER_CTRL      0x88                            /* Enable, Clock / 256 */
+#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 #elif TIMER_INTERVAL >= 0x10000
 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
-#define TIMER_CTRL      0x84                            /* Enable, Clock / 16 */
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 #else
 #define TIMER_RELOAD    (TIMER_INTERVAL)
-#define TIMER_CTRL      0x80                            /* Enable */
+#define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 #endif
 
-#define TIMER_CTRL_IE   (1 << 5)        /* Interrupt Enable */
-
-/*
- * What does it look like?
- */
-typedef struct TimerStruct {
-        unsigned long TimerLoad;
-        unsigned long TimerValue;
-        unsigned long TimerControl;
-        unsigned long TimerClear;
-} TimerStruct_t;
-
 /*
  * Returns number of ms since last clock interrupt.  Note that interrupts
  * will have been disabled by do_gettimeoffset()
  */
 static unsigned long versatile_gettimeoffset(void)
 {
-        volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE;
         unsigned long ticks1, ticks2, status;
 
         /*
@@ -828,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void)
          * an interrupt.  We get around this by ensuring that the
          * counter has not reloaded between our two reads.
          */
-        ticks2 = timer0->TimerValue & 0xffff;
+        ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
         do {
                 ticks1 = ticks2;
                 status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS);
-                ticks2 = timer0->TimerValue & 0xffff;
+                ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff;
         } while (ticks2 > ticks1);
 
         /*
@@ -859,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void)
  */
 static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-        volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-
         write_seqlock(&xtime_lock);
 
         // ...clear the interrupt
-        timer0->TimerClear = 1;
+        writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
 
         timer_tick(regs);
 
@@ -884,31 +870,32 @@ static struct irqaction versatile_timer_irq = {
  */
 static void __init versatile_timer_init(void)
 {
-        volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE;
-        volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE;
-        volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE;
-        volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE;
+        u32 val;
 
         /* 
          * set clock frequency: 
          *      VERSATILE_REFCLK is 32KHz
          *      VERSATILE_TIMCLK is 1MHz
          */
-        *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= 
-          ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
-           (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel));
+        val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE));
+        writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+               (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | 
+               (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+               (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+               IO_ADDRESS(VERSATILE_SCTL_BASE));
 
         /*
          * Initialise to a known state (all timers off)
          */
-        timer0->TimerControl = 0;
-        timer1->TimerControl = 0;
-        timer2->TimerControl = 0;
-        timer3->TimerControl = 0;
-
-        timer0->TimerLoad    = TIMER_RELOAD;
-        timer0->TimerValue   = TIMER_RELOAD;
-        timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE;  /* periodic + IE */
+        writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+        writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+        writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+        writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE);
+        writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC |
+               TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL);
 
         /* 
          * Make irqs happen for the system timer
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6dcb23d64bf5..edffa47a4b2a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -437,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
         memtable_init(mi);
         if (mdesc->map_io)
                 mdesc->map_io();
-        flush_tlb_all();
+        local_flush_tlb_all();
 
         /*
          * initialise the zones within each node
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index 052ab443ec4e..c3bd503b43a2 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -682,7 +682,7 @@ void __init memtable_init(struct meminfo *mi)
         }
 
         flush_cache_all();
-        flush_tlb_all();
+        local_flush_tlb_all();
 
         top_pmd = pmd_off_k(0xffff0000);
 }
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 55a02bc994a3..4b97950984e9 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
         if (nh >= m)
                 return ~0ULL;
         mh = m >> 32;
-        z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32;
+        if (mh << 32 <= nh) {
+                z = 0xffffffff00000000ULL;
+        } else {
+                z = nh;
+                do_div(z, mh);
+                z <<= 32;
+        }
         mul64to128(&termh, &terml, m, z);
         sub128(&remh, &reml, nh, nl, termh, terml);
         ml = m << 32;
@@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m)
                 add128(&remh, &reml, remh, reml, mh, ml);
         }
         remh = (remh << 32) | (reml >> 32);
-        z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh;
+        if (mh << 32 <= remh) {
+                z |= 0xffffffff;
+        } else {
+                do_div(remh, mh);
+                z |= remh;
+        }
         return z;
 }
 
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index fa3053e84db5..b801cd66b6ea 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 3aeedd2afc70..22f3da4e0829 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
         current->thread.error_code = 0;
         current->thread.trap_no = 6;
 
-        force_sig_info(SIGFPE, &info, current);
+        send_sig_info(SIGFPE, &info, current);
 }
 
 static void vfp_panic(char *reason)
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 6849fe35cb2e..14dd696ddeb1 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -32,6 +32,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+
+#include <asm/div64.h>
 #include <asm/ptrace.h>
 #include <asm/vfp.h>
 
@@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand)
                 if (z <= a)
                         return (s32)a >> 1;
         }
-        return (u32)(((u64)a << 31) / z) + (z >> 1);
+        {
+                u64 v = (u64)a << 31;
+                do_div(v, z);
+                return v + (z >> 1);
+        }
 }
 
 static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
@@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
                 vsn.significand >>= 1;
                 vsd.exponent++;
         }
-        vsd.significand = ((u64)vsn.significand << 32) / vsm.significand;
+        {
+                u64 significand = (u64)vsn.significand << 32;
+                do_div(significand, vsm.significand);
+                vsd.significand = significand;
+        }
         if ((vsd.significand & 0x3f) == 0)
                 vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32);
 
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 2e28c201dcc0..942a2819576c 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -68,7 +68,6 @@ struct etherh_priv {
         void __iomem    *dma_base;
         unsigned int    id;
         void __iomem    *ctrl_port;
-        void __iomem    *base;
         unsigned char   ctrl;
         u32             supported;
 };
@@ -178,7 +177,7 @@ etherh_setif(struct net_device *dev)
         switch (etherh_priv(dev)->id) {
         case PROD_I3_ETHERLAN600:
         case PROD_I3_ETHERLAN600A:
-                addr = etherh_priv(dev)->base + EN0_RCNTHI;
+                addr = (void *)dev->base_addr + EN0_RCNTHI;
 
                 switch (dev->if_port) {
                 case IF_PORT_10BASE2:
@@ -219,7 +218,7 @@ etherh_getifstat(struct net_device *dev)
         switch (etherh_priv(dev)->id) {
         case PROD_I3_ETHERLAN600:
         case PROD_I3_ETHERLAN600A:
-                addr = etherh_priv(dev)->base + EN0_RCNTHI;
+                addr = (void *)dev->base_addr + EN0_RCNTHI;
                 switch (dev->if_port) {
                 case IF_PORT_10BASE2:
                         stat = 1;
@@ -282,7 +281,7 @@ static void
 etherh_reset(struct net_device *dev)
 {
         struct ei_device *ei_local = netdev_priv(dev);
-        void __iomem *addr = etherh_priv(dev)->base;
+        void __iomem *addr = (void *)dev->base_addr;
 
         writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
 
@@ -328,7 +327,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
 
         ei_local->dmaing = 1;
 
-        addr = etherh_priv(dev)->base;
+        addr = (void *)dev->base_addr;
         dma_base = etherh_priv(dev)->dma_base;
 
         count = (count + 1) & ~1;
@@ -388,7 +387,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int
 
         ei_local->dmaing = 1;
 
-        addr = etherh_priv(dev)->base;
+        addr = (void *)dev->base_addr;
         dma_base = etherh_priv(dev)->dma_base;
 
         buf = skb->data;
@@ -428,7 +427,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p
 
         ei_local->dmaing = 1;
 
-        addr = etherh_priv(dev)->base;
+        addr = (void *)dev->base_addr;
         dma_base = etherh_priv(dev)->dma_base;
 
         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
@@ -697,8 +696,7 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
                 eh->ctrl_port = eh->ioc_fast;
         }
 
-        eh->base = eh->memc + data->ns8390_offset;
-        dev->base_addr = (unsigned long)eh->base;
+        dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
         eh->dma_base = eh->memc + data->dataport_offset;
         eh->ctrl_port += data->ctrlport_offset;
 
diff --git a/include/asm-arm/arch-pxa/debug-macro.S b/include/asm-arm/arch-pxa/debug-macro.S
index f288e74b67c2..b6ec68879176 100644
--- a/include/asm-arm/arch-pxa/debug-macro.S
+++ b/include/asm-arm/arch-pxa/debug-macro.S
@@ -11,6 +11,8 @@
  *
 */
 
+#include "hardware.h"
+
                 .macro  addruart,rx
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
diff --git a/include/asm-arm/hardware/arm_timer.h b/include/asm-arm/hardware/arm_timer.h
new file mode 100644
index 000000000000..04be3bdf46b8
--- /dev/null
+++ b/include/asm-arm/hardware/arm_timer.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
+#define __ASM_ARM_HARDWARE_ARM_TIMER_H
+
+#define TIMER_LOAD      0x00
+#define TIMER_VALUE     0x04
+#define TIMER_CTRL      0x08
+#define TIMER_CTRL_ONESHOT      (1 << 0)
+#define TIMER_CTRL_32BIT        (1 << 1)
+#define TIMER_CTRL_DIV1         (0 << 2)
+#define TIMER_CTRL_DIV16        (1 << 2)
+#define TIMER_CTRL_DIV256       (2 << 2)
+#define TIMER_CTRL_IE           (1 << 5)        /* Interrupt Enable (versatile only) */
+#define TIMER_CTRL_PERIODIC     (1 << 6)
+#define TIMER_CTRL_ENABLE       (1 << 7)
+
+#define TIMER_INTCLR    0x0c
+#define TIMER_RIS       0x10
+#define TIMER_MIS       0x14
+#define TIMER_BGLOAD    0x18
+
+#endif
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 3d0d2860b6db..cdf49f442fd2 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -290,7 +290,6 @@ do {									\
 })
 
 #ifdef CONFIG_SMP
-#error SMP not supported
 
 #define smp_mb()                mb()
 #define smp_rmb()               rmb()
@@ -304,6 +303,8 @@ do {									\
 #define smp_wmb()               barrier()
 #define smp_read_barrier_depends()              do { } while(0)
 
+#endif /* CONFIG_SMP */
+
 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
 /*
  * On the StrongARM, "swp" is terminally broken since it bypasses the
@@ -316,9 +317,16 @@ do {									\
  *
  * We choose (1) since its the "easiest" to achieve here and is not
  * dependent on the processor type.
+ *
+ * NOTE that this solution won't work on an SMP system, so explcitly
+ * forbid it here.
  */
+#ifdef CONFIG_SMP
+#error SMP is not supported on SA1100/SA110
+#else
 #define swp_is_buggy
 #endif
+#endif
 
 static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
 {
@@ -361,8 +369,6 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
         return ret;
 }
 
-#endif /* CONFIG_SMP */
-
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index 8a864b118569..9387a5e1ffe0 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -235,7 +235,7 @@ extern struct cpu_tlb_fns cpu_tlb;
 
 #define tlb_flag(f)     ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
 
-static inline void flush_tlb_all(void)
+static inline void local_flush_tlb_all(void)
 {
         const int zero = 0;
         const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -253,7 +253,7 @@ static inline void flush_tlb_all(void)
                 asm("mcr%? p15, 0, %0, c8, c5, 0" : : "r" (zero));
 }
 
-static inline void flush_tlb_mm(struct mm_struct *mm)
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
 {
         const int zero = 0;
         const int asid = ASID(mm);
@@ -282,7 +282,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 }
 
 static inline void
-flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
         const int zero = 0;
         const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -313,7 +313,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
                 asm("mcr%? p15, 0, %0, c8, c5, 1" : : "r" (uaddr));
 }
 
-static inline void flush_tlb_kernel_page(unsigned long kaddr)
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 {
         const int zero = 0;
         const unsigned int __tlb_flag = __cpu_tlb_flags;
@@ -384,8 +384,24 @@ static inline void clean_pmd_entry(pmd_t *pmd)
 /*
  * Convert calls to our calling convention.
  */
-#define flush_tlb_range(vma,start,end)  __cpu_flush_user_tlb_range(start,end,vma)
-#define flush_tlb_kernel_range(s,e)     __cpu_flush_kern_tlb_range(s,e)
+#define local_flush_tlb_range(vma,start,end)    __cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e)       __cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all           local_flush_tlb_all
+#define flush_tlb_mm            local_flush_tlb_mm
+#define flush_tlb_page          local_flush_tlb_page
+#define flush_tlb_kernel_page   local_flush_tlb_kernel_page
+#define flush_tlb_range         local_flush_tlb_range
+#define flush_tlb_kernel_range  local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
 
 /*
  * if PG_dcache_dirty is set for the page, we need to ensure that any