Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: sfi: Make local functions static
  x86, earlyprintk: Add hsu early console for Intel Medfield platform
  x86, earlyprintk: Add earlyprintk for Intel Moorestown platform
  x86: Add two helper macros for fixed address mapping
  x86, mrst: A function in a header file needs to be marked "inline"

7 files changed, 363 insertions, 3 deletions

diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 75085080b63e..e5bb96b10f1a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,6 +43,10 @@ config EARLY_PRINTK
           with klogd/syslogd or the X server. You should normally N here,
           unless you want to debug such a crash.
 
+config EARLY_PRINTK_MRST
+        bool "Early printk for MRST platform support"
+        depends on EARLY_PRINTK && X86_MRST
+
 config EARLY_PRINTK_DBGP
         bool "Early printk via EHCI debug port"
         depends on EARLY_PRINTK && PCI
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index d07b44f7d1dc..4d293dced62f 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -214,5 +214,20 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
         BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
         return __virt_to_fix(vaddr);
 }
+
+/* Return an pointer with offset calculated */
+static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
+                                phys_addr_t phys, pgprot_t flags)
+{
+        __set_fixmap(idx, phys, flags);
+        return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));
+}
+
+#define set_fixmap_offset(idx, phys)                    \
+        __set_fixmap_offset(idx, phys, PAGE_KERNEL)
+
+#define set_fixmap_offset_nocache(idx, phys)                    \
+        __set_fixmap_offset(idx, phys, PAGE_KERNEL_NOCACHE)
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_H */
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 16350740edf6..4a711a684b17 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -10,6 +10,9 @@
  */
 #ifndef _ASM_X86_MRST_H
 #define _ASM_X86_MRST_H
+
+#include <linux/sfi.h>
+
 extern int pci_mrst_init(void);
 int __init sfi_parse_mrtc(struct sfi_table_header *table);
 
@@ -26,7 +29,7 @@ enum mrst_cpu_type {
 };
 
 extern enum mrst_cpu_type __mrst_cpu_chip;
-static enum mrst_cpu_type mrst_identify_cpu(void)
+static inline enum mrst_cpu_type mrst_identify_cpu(void)
 {
         return __mrst_cpu_chip;
 }
@@ -42,4 +45,9 @@ extern enum mrst_timer_options mrst_timer_options;
 #define SFI_MTMR_MAX_NUM 8
 #define SFI_MRTC_MAX    8
 
+extern struct console early_mrst_console;
+extern void mrst_early_console_init(void);
+
+extern struct console early_hsu_console;
+extern void hsu_early_console_init(void);
 #endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index f49257e33805..4370154f4122 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)              += kgdb.o
 obj-$(CONFIG_VM86)              += vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)      += early_printk.o
+obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o
 
 obj-$(CONFIG_HPET_TIMER)        += hpet.o
 obj-$(CONFIG_APB_TIMER)         += apb_timer.o
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index fa99bae75ace..4572f25f9325 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -14,6 +14,7 @@
 #include <xen/hvc-console.h>
 #include <asm/pci-direct.h>
 #include <asm/fixmap.h>
+#include <asm/mrst.h>
 #include <asm/pgtable.h>
 #include <linux/usb/ehci_def.h>
 
@@ -239,6 +240,18 @@ static int __init setup_early_printk(char *buf)
                 if (!strncmp(buf, "xen", 3))
                         early_console_register(&xenboot_console, keep);
 #endif
+#ifdef CONFIG_X86_MRST_EARLY_PRINTK
+                if (!strncmp(buf, "mrst", 4)) {
+                        mrst_early_console_init();
+                        early_console_register(&early_mrst_console, keep);
+                }
+
+                if (!strncmp(buf, "hsu", 3)) {
+                        hsu_early_console_init();
+                        early_console_register(&early_hsu_console, keep);
+                }
+
+#endif
                 buf++;
         }
         return 0;
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c
new file mode 100644
index 000000000000..65df603622b2
--- /dev/null
+++ b/arch/x86/kernel/early_printk_mrst.c
@@ -0,0 +1,319 @@
+/*
+ * early_printk_mrst.c - early consoles for Intel MID platforms
+ *
+ * Copyright (c) 2008-2010, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/*
+ * This file implements two early consoles named mrst and hsu.
+ * mrst is based on Maxim3110 spi-uart device, it exists in both
+ * Moorestown and Medfield platforms, while hsu is based on a High
+ * Speed UART device which only exists in the Medfield platform
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/serial_mfd.h>
+#include <linux/kmsg_dump.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/mrst.h>
+
+#define MRST_SPI_TIMEOUT                0x200000
+#define MRST_REGBASE_SPI0               0xff128000
+#define MRST_REGBASE_SPI1               0xff128400
+#define MRST_CLK_SPI0_REG               0xff11d86c
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET                  0
+
+#define SPI_FRF_OFFSET                  4
+#define SPI_FRF_SPI                     0x0
+#define SPI_FRF_SSP                     0x1
+#define SPI_FRF_MICROWIRE               0x2
+#define SPI_FRF_RESV                    0x3
+
+#define SPI_MODE_OFFSET                 6
+#define SPI_SCPH_OFFSET                 6
+#define SPI_SCOL_OFFSET                 7
+#define SPI_TMOD_OFFSET                 8
+#define SPI_TMOD_TR                     0x0             /* xmit & recv */
+#define SPI_TMOD_TO                     0x1             /* xmit only */
+#define SPI_TMOD_RO                     0x2             /* recv only */
+#define SPI_TMOD_EPROMREAD              0x3             /* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET                10
+#define SPI_SRL_OFFSET                  11
+#define SPI_CFS_OFFSET                  12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK                         0x7f            /* cover 7 bits */
+#define SR_BUSY                         (1 << 0)
+#define SR_TF_NOT_FULL                  (1 << 1)
+#define SR_TF_EMPT                      (1 << 2)
+#define SR_RF_NOT_EMPT                  (1 << 3)
+#define SR_RF_FULL                      (1 << 4)
+#define SR_TX_ERR                       (1 << 5)
+#define SR_DCOL                         (1 << 6)
+
+struct dw_spi_reg {
+        u32     ctrl0;
+        u32     ctrl1;
+        u32     ssienr;
+        u32     mwcr;
+        u32     ser;
+        u32     baudr;
+        u32     txfltr;
+        u32     rxfltr;
+        u32     txflr;
+        u32     rxflr;
+        u32     sr;
+        u32     imr;
+        u32     isr;
+        u32     risr;
+        u32     txoicr;
+        u32     rxoicr;
+        u32     rxuicr;
+        u32     msticr;
+        u32     icr;
+        u32     dmacr;
+        u32     dmatdlr;
+        u32     dmardlr;
+        u32     idr;
+        u32     version;
+
+        /* Currently operates as 32 bits, though only the low 16 bits matter */
+        u32     dr;
+} __packed;
+
+#define dw_readl(dw, name)              __raw_readl(&(dw)->name)
+#define dw_writel(dw, name, val)        __raw_writel((val), &(dw)->name)
+
+/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
+static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
+
+static u32 *pclk_spi0;
+/* Always contains an accessable address, start with 0 */
+static struct dw_spi_reg *pspi;
+
+static struct kmsg_dumper dw_dumper;
+static int dumper_registered;
+
+static void dw_kmsg_dump(struct kmsg_dumper *dumper,
+                        enum kmsg_dump_reason reason,
+                        const char *s1, unsigned long l1,
+                        const char *s2, unsigned long l2)
+{
+        int i;
+
+        /* When run to this, we'd better re-init the HW */
+        mrst_early_console_init();
+
+        for (i = 0; i < l1; i++)
+                early_mrst_console.write(&early_mrst_console, s1 + i, 1);
+        for (i = 0; i < l2; i++)
+                early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+}
+
+/* Set the ratio rate to 115200, 8n1, IRQ disabled */
+static void max3110_write_config(void)
+{
+        u16 config;
+
+        config = 0xc001;
+        dw_writel(pspi, dr, config);
+}
+
+/* Translate char to a eligible word and send to max3110 */
+static void max3110_write_data(char c)
+{
+        u16 data;
+
+        data = 0x8000 | c;
+        dw_writel(pspi, dr, data);
+}
+
+void mrst_early_console_init(void)
+{
+        u32 ctrlr0 = 0;
+        u32 spi0_cdiv;
+        u32 freq; /* Freqency info only need be searched once */
+
+        /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
+        pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+                                                        MRST_CLK_SPI0_REG);
+        spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
+        freq = 100000000 / (spi0_cdiv + 1);
+
+        if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+                mrst_spi_paddr = MRST_REGBASE_SPI1;
+
+        pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+                                                mrst_spi_paddr);
+
+        /* Disable SPI controller */
+        dw_writel(pspi, ssienr, 0);
+
+        /* Set control param, 8 bits, transmit only mode */
+        ctrlr0 = dw_readl(pspi, ctrl0);
+
+        ctrlr0 &= 0xfcc0;
+        ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
+                      | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
+        dw_writel(pspi, ctrl0, ctrlr0);
+
+        /*
+         * Change the spi0 clk to comply with 115200 bps, use 100000 to
+         * calculate the clk dividor to make the clock a little slower
+         * than real baud rate.
+         */
+        dw_writel(pspi, baudr, freq/100000);
+
+        /* Disable all INT for early phase */
+        dw_writel(pspi, imr, 0x0);
+
+        /* Set the cs to spi-uart */
+        dw_writel(pspi, ser, 0x2);
+
+        /* Enable the HW, the last step for HW init */
+        dw_writel(pspi, ssienr, 0x1);
+
+        /* Set the default configuration */
+        max3110_write_config();
+
+        /* Register the kmsg dumper */
+        if (!dumper_registered) {
+                dw_dumper.dump = dw_kmsg_dump;
+                kmsg_dump_register(&dw_dumper);
+                dumper_registered = 1;
+        }
+}
+
+/* Slave select should be called in the read/write function */
+static void early_mrst_spi_putc(char c)
+{
+        unsigned int timeout;
+        u32 sr;
+
+        timeout = MRST_SPI_TIMEOUT;
+        /* Early putc needs to make sure the TX FIFO is not full */
+        while (--timeout) {
+                sr = dw_readl(pspi, sr);
+                if (!(sr & SR_TF_NOT_FULL))
+                        cpu_relax();
+                else
+                        break;
+        }
+
+        if (!timeout)
+                pr_warning("MRST earlycon: timed out\n");
+        else
+                max3110_write_data(c);
+}
+
+/* Early SPI only uses polling mode */
+static void early_mrst_spi_write(struct console *con, const char *str, unsigned n)
+{
+        int i;
+
+        for (i = 0; i < n && *str; i++) {
+                if (*str == '\n')
+                        early_mrst_spi_putc('\r');
+                early_mrst_spi_putc(*str);
+                str++;
+        }
+}
+
+struct console early_mrst_console = {
+        .name =         "earlymrst",
+        .write =        early_mrst_spi_write,
+        .flags =        CON_PRINTBUFFER,
+        .index =        -1,
+};
+
+/*
+ * Following is the early console based on Medfield HSU (High
+ * Speed UART) device.
+ */
+#define HSU_PORT2_PADDR         0xffa28180
+
+static void __iomem *phsu;
+
+void hsu_early_console_init(void)
+{
+        u8 lcr;
+
+        phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+                                                        HSU_PORT2_PADDR);
+
+        /* Disable FIFO */
+        writeb(0x0, phsu + UART_FCR);
+
+        /* Set to default 115200 bps, 8n1 */
+        lcr = readb(phsu + UART_LCR);
+        writeb((0x80 | lcr), phsu + UART_LCR);
+        writeb(0x18, phsu + UART_DLL);
+        writeb(lcr,  phsu + UART_LCR);
+        writel(0x3600, phsu + UART_MUL*4);
+
+        writeb(0x8, phsu + UART_MCR);
+        writeb(0x7, phsu + UART_FCR);
+        writeb(0x3, phsu + UART_LCR);
+
+        /* Clear IRQ status */
+        readb(phsu + UART_LSR);
+        readb(phsu + UART_RX);
+        readb(phsu + UART_IIR);
+        readb(phsu + UART_MSR);
+
+        /* Enable FIFO */
+        writeb(0x7, phsu + UART_FCR);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void early_hsu_putc(char ch)
+{
+        unsigned int timeout = 10000; /* 10ms */
+        u8 status;
+
+        while (--timeout) {
+                status = readb(phsu + UART_LSR);
+                if (status & BOTH_EMPTY)
+                        break;
+                udelay(1);
+        }
+
+        /* Only write the char when there was no timeout */
+        if (timeout)
+                writeb(ch, phsu + UART_TX);
+}
+
+static void early_hsu_write(struct console *con, const char *str, unsigned n)
+{
+        int i;
+
+        for (i = 0; i < n && *str; i++) {
+                if (*str == '\n')
+                        early_hsu_putc('\r');
+                early_hsu_putc(*str);
+                str++;
+        }
+}
+
+struct console early_hsu_console = {
+        .name =         "earlyhsu",
+        .write =        early_hsu_write,
+        .flags =        CON_PRINTBUFFER,
+        .index =        -1,
+};
diff --git a/arch/x86/kernel/sfi.c b/arch/x86/kernel/sfi.c
index cb22acf3ed09..dd4c281ffe57 100644
--- a/arch/x86/kernel/sfi.c
+++ b/arch/x86/kernel/sfi.c
@@ -34,7 +34,7 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 
-void __init mp_sfi_register_lapic_address(unsigned long address)
+static void __init mp_sfi_register_lapic_address(unsigned long address)
 {
         mp_lapic_addr = address;
 
@@ -46,7 +46,7 @@ void __init mp_sfi_register_lapic_address(unsigned long address)
 }
 
 /* All CPUs enumerated by SFI must be present and enabled */
-void __cpuinit mp_sfi_register_lapic(u8 id)
+static void __cpuinit mp_sfi_register_lapic(u8 id)
 {
         if (MAX_APICS - id <= 0) {
                 pr_warning("Processor #%d invalid (max %d)\n",