i2c: Remove trailing whitespaces in busses/Kconfig

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 15 insertions, 15 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d01d0b175e1c..495c971ce5bf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -135,7 +135,7 @@ config I2C_ELEKTOR
           This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
           such an adapter.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called i2c-elektor.
 
 config I2C_GPIO
@@ -190,7 +190,7 @@ config I2C_I810
         select I2C_ALGOBIT
         help
           If you say yes to this option, support will be included for the Intel
-          810/815 family of mainboard I2C interfaces.  Specifically, the 
+          810/815 family of mainboard I2C interfaces.  Specifically, the
           following versions of the chipset are supported:
             i810AA
             i810AB
@@ -248,8 +248,8 @@ config I2C_IBM_IIC
         tristate "IBM PPC 4xx on-chip I2C interface"
         depends on 4xx
         help
-          Say Y here if you want to use IIC peripheral found on 
-          embedded IBM PPC 4xx based systems. 
+          Say Y here if you want to use IIC peripheral found on
+          embedded IBM PPC 4xx based systems.
 
           This driver can also be built as a module.  If so, the module
           will be called i2c-ibm_iic.
@@ -269,7 +269,7 @@ config I2C_IXP2000
         depends on ARCH_IXP2000
         select I2C_ALGOBIT
         help
-          Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based 
+          Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based
           system and are using GPIO lines for an I2C bus.
 
           This support is also available as a module. If so, the module
@@ -354,7 +354,7 @@ config I2C_PARPORT
           on the parport driver.  This is meant for embedded systems. Don't say
           Y here if you intend to say Y or M there.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called i2c-parport.
 
 config I2C_PARPORT_LIGHT
@@ -372,12 +372,12 @@ config I2C_PARPORT_LIGHT
           the clean but heavy parport handling is not an option.  The
           drawback is a reduced portability and the impossibility to
           daisy-chain other parallel port devices.
-          
+
           Don't say Y here if you said Y or M to i2c-parport.  Saying M to
           both is possible but both modules should not be loaded at the same
           time.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called i2c-parport-light.
 
 config I2C_PASEMI
@@ -401,7 +401,7 @@ config I2C_PROSAVAGE
 
           This driver is deprecated in favor of the savagefb driver.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called i2c-prosavage.
 
 config I2C_S3C2410
@@ -417,7 +417,7 @@ config I2C_SAVAGE4
         depends on PCI
         select I2C_ALGOBIT
         help
-          If you say yes to this option, support will be included for the 
+          If you say yes to this option, support will be included for the
           S3 Savage 4 I2C interface.
 
           This driver is deprecated in favor of the savagefb driver.
@@ -452,7 +452,7 @@ config SCx200_I2C
 
           If you don't know what to do here, say N.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called scx200_i2c.
 
           This driver is deprecated and will be dropped soon. Use i2c-gpio
@@ -483,14 +483,14 @@ config SCx200_ACB
 
           If you don't know what to do here, say N.
 
-          This support is also available as a module.  If so, the module 
+          This support is also available as a module.  If so, the module
           will be called scx200_acb.
 
 config I2C_SIS5595
         tristate "SiS 5595"
         depends on PCI
         help
-          If you say yes to this option, support will be included for the 
+          If you say yes to this option, support will be included for the
           SiS5595 SMBus (a subset of I2C) interface.
 
           This driver can also be built as a module.  If so, the module
@@ -500,7 +500,7 @@ config I2C_SIS630
         tristate "SiS 630/730"
         depends on PCI
         help
-          If you say yes to this option, support will be included for the 
+          If you say yes to this option, support will be included for the
           SiS630 and SiS730 SMBus (a subset of I2C) interface.
 
           This driver can also be built as a module.  If so, the module
@@ -634,7 +634,7 @@ config I2C_PCA_ISA
         help
           This driver supports ISA boards using the Philips PCA9564
           parallel bus to I2C bus controller.
-          
+
           This driver can also be built as a module.  If so, the module
           will be called i2c-pca-isa.