IDE: Coding Style fixes to drivers/ide/pci/cmd640.c

Fix all the errors and a few warnings.
Compile tested.

[bart: some fixes, md5sum checked]

Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 48 insertions, 46 deletions

diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 662099a98a72..b076dbfc43a7 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -4,7 +4,7 @@
 
 /*
  *  Original authors:   abramov@cecmow.enet.dec.com (Igor Abramov)
- *                      mlord@pobox.com (Mark Lord)
+ *                      mlord@pobox.com (Mark Lord)
  *
  *  See linux/MAINTAINERS for address of current maintainer.
  *
@@ -98,7 +98,7 @@
 
 #define CMD640_PREFETCH_MASKS 1
 
-//#define CMD640_DUMP_REGS
+/*#define CMD640_DUMP_REGS */
 
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -112,7 +112,7 @@
 /*
  * This flag is set in ide.c by the parameter:  ide0=cmd640_vlb
  */
-int cmd640_vlb = 0;
+int cmd640_vlb;
 
 /*
  * CMD640 specific registers definition.
@@ -206,13 +206,13 @@ static unsigned int cmd640_chip_version;
 
 /* PCI method 1 access */
 
-static void put_cmd640_reg_pci1 (u16 reg, u8 val)
+static void put_cmd640_reg_pci1(u16 reg, u8 val)
 {
         outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
         outb_p(val, (reg & 3) | 0xcfc);
 }
 
-static u8 get_cmd640_reg_pci1 (u16 reg)
+static u8 get_cmd640_reg_pci1(u16 reg)
 {
         outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
         return inb_p((reg & 3) | 0xcfc);
@@ -220,14 +220,14 @@ static u8 get_cmd640_reg_pci1 (u16 reg)
 
 /* PCI method 2 access (from CMD datasheet) */
 
-static void put_cmd640_reg_pci2 (u16 reg, u8 val)
+static void put_cmd640_reg_pci2(u16 reg, u8 val)
 {
         outb_p(0x10, 0xcf8);
         outb_p(val, cmd640_key + reg);
         outb_p(0, 0xcf8);
 }
 
-static u8 get_cmd640_reg_pci2 (u16 reg)
+static u8 get_cmd640_reg_pci2(u16 reg)
 {
         u8 b;
 
@@ -239,13 +239,13 @@ static u8 get_cmd640_reg_pci2 (u16 reg)
 
 /* VLB access */
 
-static void put_cmd640_reg_vlb (u16 reg, u8 val)
+static void put_cmd640_reg_vlb(u16 reg, u8 val)
 {
         outb_p(reg, cmd640_key);
         outb_p(val, cmd640_key + 4);
 }
 
-static u8 get_cmd640_reg_vlb (u16 reg)
+static u8 get_cmd640_reg_vlb(u16 reg)
 {
         outb_p(reg, cmd640_key);
         return inb_p(cmd640_key + 4);
@@ -267,11 +267,11 @@ static void put_cmd640_reg(u16 reg, u8 val)
         unsigned long flags;
 
         spin_lock_irqsave(&cmd640_lock, flags);
-        __put_cmd640_reg(reg,val);
+        __put_cmd640_reg(reg, val);
         spin_unlock_irqrestore(&cmd640_lock, flags);
 }
 
-static int __init match_pci_cmd640_device (void)
+static int __init match_pci_cmd640_device(void)
 {
         const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
         unsigned int i;
@@ -291,7 +291,7 @@ static int __init match_pci_cmd640_device (void)
 /*
  * Probe for CMD640x -- pci method 1
  */
-static int __init probe_for_cmd640_pci1 (void)
+static int __init probe_for_cmd640_pci1(void)
 {
         __get_cmd640_reg = get_cmd640_reg_pci1;
         __put_cmd640_reg = put_cmd640_reg_pci1;
@@ -307,7 +307,7 @@ static int __init probe_for_cmd640_pci1 (void)
 /*
  * Probe for CMD640x -- pci method 2
  */
-static int __init probe_for_cmd640_pci2 (void)
+static int __init probe_for_cmd640_pci2(void)
 {
         __get_cmd640_reg = get_cmd640_reg_pci2;
         __put_cmd640_reg = put_cmd640_reg_pci2;
@@ -321,7 +321,7 @@ static int __init probe_for_cmd640_pci2 (void)
 /*
  * Probe for CMD640x -- vlb
  */
-static int __init probe_for_cmd640_vlb (void)
+static int __init probe_for_cmd640_vlb(void)
 {
         u8 b;
 
@@ -342,7 +342,7 @@ static int __init probe_for_cmd640_vlb (void)
  *  Returns 1 if an IDE interface/drive exists at 0x170,
  *  Returns 0 otherwise.
  */
-static int __init secondary_port_responding (void)
+static int __init secondary_port_responding(void)
 {
         unsigned long flags;
 
@@ -366,7 +366,7 @@ static int __init secondary_port_responding (void)
 /*
  * Dump out all cmd640 registers.  May be called from ide.c
  */
-static void cmd640_dump_regs (void)
+static void cmd640_dump_regs(void)
 {
         unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
 
@@ -435,7 +435,7 @@ static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
 /*
  * Dump out current drive clocks settings
  */
-static void display_clocks (unsigned int index)
+static void display_clocks(unsigned int index)
 {
         u8 active_count, recovery_count;
 
@@ -454,7 +454,7 @@ static void display_clocks (unsigned int index)
  * Pack active and recovery counts into single byte representation
  * used by controller
  */
-static inline u8 pack_nibbles (u8 upper, u8 lower)
+static inline u8 pack_nibbles(u8 upper, u8 lower)
 {
         return ((upper & 0x0f) << 4) | (lower & 0x0f);
 }
@@ -462,7 +462,7 @@ static inline u8 pack_nibbles (u8 upper, u8 lower)
 /*
  * This routine retrieves the initial drive timings from the chipset.
  */
-static void __init retrieve_drive_counts (unsigned int index)
+static void __init retrieve_drive_counts(unsigned int index)
 {
         u8 b;
 
@@ -471,10 +471,10 @@ static void __init retrieve_drive_counts (unsigned int index)
          */
         b = get_cmd640_reg(arttim_regs[index]) & ~0x3f;
         switch (b) {
-                case 0x00: b = 4; break;
-                case 0x80: b = 3; break;
-                case 0x40: b = 2; break;
-                default:   b = 5; break;
+        case 0x00: b = 4; break;
+        case 0x80: b = 3; break;
+        case 0x40: b = 2; break;
+        default:   b = 5; break;
         }
         setup_counts[index] = b;
 
@@ -523,11 +523,11 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index)
          * Convert setup_count to internal chipset representation
          */
         switch (setup_count) {
-                case 4:  setup_count = 0x00; break;
-                case 3:  setup_count = 0x80; break;
-                case 1:
-                case 2:  setup_count = 0x40; break;
-                default: setup_count = 0xc0; /* case 5 */
+        case 4:  setup_count = 0x00; break;
+        case 3:  setup_count = 0x80; break;
+        case 1:
+        case 2:  setup_count = 0x40; break;
+        default: setup_count = 0xc0; /* case 5 */
         }
 
         /*
@@ -607,20 +607,21 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
         u8 b;
 
         switch (pio) {
-                case 6: /* set fast-devsel off */
-                case 7: /* set fast-devsel on */
-                        b = get_cmd640_reg(CNTRL) & ~0x27;
-                        if (pio & 1)
-                                b |= 0x27;
-                        put_cmd640_reg(CNTRL, b);
-                        printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis");
-                        return;
-
-                case 8: /* set prefetch off */
-                case 9: /* set prefetch on */
-                        set_prefetch_mode(drive, index, pio & 1);
-                        printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis");
-                        return;
+        case 6: /* set fast-devsel off */
+        case 7: /* set fast-devsel on */
+                b = get_cmd640_reg(CNTRL) & ~0x27;
+                if (pio & 1)
+                        b |= 0x27;
+                put_cmd640_reg(CNTRL, b);
+                printk("%s: %sabled cmd640 fast host timing (devsel)\n",
+                        drive->name, (pio & 1) ? "en" : "dis");
+                return;
+        case 8: /* set prefetch off */
+        case 9: /* set prefetch on */
+                set_prefetch_mode(drive, index, pio & 1);
+                printk("%s: %sabled cmd640 prefetch\n",
+                        drive->name, (pio & 1) ? "en" : "dis");
+                return;
         }
 
         cycle_time = ide_pio_cycle_time(drive, pio);
@@ -729,7 +730,7 @@ static int __init cmd640x_init(void)
         cfr = get_cmd640_reg(CFR);
         cmd640_chip_version = cfr & CFR_DEVREV;
         if (cmd640_chip_version == 0) {
-                printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
+                printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
                 return 0;
         }
 
@@ -835,9 +836,10 @@ static int __init cmd640x_init(void)
 
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
                 if (drive->autotune || ((index > 1) && second_port_toggled)) {
-                        /*
-                         * Reset timing to the slowest speed and turn off prefetch.
-                         * This way, the drive identify code has a better chance.
+                        /*
+                         * Reset timing to the slowest speed and turn off
+                         * prefetch.  This way, the drive identify code has
+                         * a better chance.
                          */
                         setup_counts    [index] = 4;    /* max possible */
                         active_counts   [index] = 16;   /* max possible */