[PATCH] USB: add S3C24XX USB Host driver support

USB (OHCI) Host driver for S3C2410/S3C2440 based systems

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 502 insertions, 0 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cd329dd7fb86..85dacc92545a 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -20,6 +20,7 @@ config USB_ARCH_HAS_OHCI
         default y if SA1111
         default y if ARCH_OMAP
         default y if ARCH_LH7A404
+        default y if ARCH_S3C2410
         default y if PXA27x
         # PPC:
         default y if STB03xxx
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 68decab280dd..56b43f2a0e52 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -887,6 +887,10 @@ MODULE_LICENSE ("GPL");
 #include "ohci-sa1111.c"
 #endif
 
+#ifdef CONFIG_ARCH_S3C2410
+#include "ohci-s3c2410.c"
+#endif
+
 #ifdef CONFIG_ARCH_OMAP
 #include "ohci-omap.c"
 #endif
@@ -909,6 +913,7 @@ MODULE_LICENSE ("GPL");
 
 #if !(defined(CONFIG_PCI) \
       || defined(CONFIG_SA1111) \
+      || defined(CONFIG_ARCH_S3C2410) \
       || defined(CONFIG_ARCH_OMAP) \
       || defined (CONFIG_ARCH_LH7A404) \
       || defined (CONFIG_PXA27x) \
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
new file mode 100644
index 000000000000..e9401662503c
--- /dev/null
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -0,0 +1,496 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * USB Bus Glue for Samsung S3C2410
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Rusell King et al.
+ *
+ * Modified for S3C2410 from ohci-sa1111.c, ohci-omap.c and ohci-lh7a40.c
+ *      by Ben Dooks, <ben@simtec.co.uk>
+ *      Copyright (C) 2004 Simtec Electronics
+ *
+ * Thanks to basprog@mail.ru for updates to newer kernels
+ *
+ * This file is licenced under the GPL.
+*/
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/clock.h>
+#include <asm/arch/usb-control.h>
+
+#define valid_port(idx) ((idx) == 1 || (idx) == 2)
+
+/* clock device associated with the hcd */
+
+static struct clk *clk;
+
+/* forward definitions */
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
+
+/* conversion functions */
+
+struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+{
+        return hcd->self.controller->platform_data;
+}
+
+static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
+{
+        struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+        dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+        clk_enable(clk);
+
+        if (info != NULL) {
+                info->hcd       = hcd;
+                info->report_oc = s3c2410_hcd_oc;
+
+                if (info->enable_oc != NULL) {
+                        (info->enable_oc)(info, 1);
+                }
+        }
+}
+
+static void s3c2410_stop_hc(struct platform_device *dev)
+{
+        struct s3c2410_hcd_info *info = dev->dev.platform_data;
+
+        dev_dbg(&dev->dev, "s3c2410_stop_hc:\n");
+
+        if (info != NULL) {
+                info->report_oc = NULL;
+                info->hcd       = NULL;
+
+                if (info->enable_oc != NULL) {
+                        (info->enable_oc)(info, 0);
+                }
+        }
+
+        clk_disable(clk);
+}
+
+/* ohci_s3c2410_hub_status_data
+ *
+ * update the status data from the hub with anything that
+ * has been detected by our system
+*/
+
+static int
+ohci_s3c2410_hub_status_data (struct usb_hcd *hcd, char *buf)
+{
+        struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+        struct s3c2410_hcd_port *port;
+        int orig;
+        int portno;
+
+        orig  = ohci_hub_status_data (hcd, buf);
+
+        if (info == NULL)
+                return orig;
+
+        port = &info->port[0];
+
+        /* mark any changed port as changed */
+
+        for (portno = 0; portno < 2; port++, portno++) {
+                if (port->oc_changed == 1 &&
+                    port->flags & S3C_HCDFLG_USED) {
+                        dev_dbg(hcd->self.controller,
+                                "oc change on port %d\n", portno);
+
+                        if (orig < 1)
+                                orig = 1;
+
+                        buf[0] |= 1<<(portno+1);
+                }
+        }
+
+        return orig;
+}
+
+/* s3c2410_usb_set_power
+ *
+ * configure the power on a port, by calling the platform device
+ * routine registered with the platform device
+*/
+
+static void s3c2410_usb_set_power(struct s3c2410_hcd_info *info,
+                                  int port, int to)
+{
+        if (info == NULL)
+                return;
+
+        if (info->power_control != NULL) {
+                info->port[port-1].power = to;
+                (info->power_control)(port, to);
+        }
+}
+
+/* ohci_s3c2410_hub_control
+ *
+ * look at control requests to the hub, and see if we need
+ * to take any action or over-ride the results from the
+ * request.
+*/
+
+static int ohci_s3c2410_hub_control (
+        struct usb_hcd  *hcd,
+        u16             typeReq,
+        u16             wValue,
+        u16             wIndex,
+        char            *buf,
+        u16             wLength)
+{
+        struct s3c2410_hcd_info *info = to_s3c2410_info(hcd);
+        struct usb_hub_descriptor *desc;
+        int ret = -EINVAL;
+        u32 *data = (u32 *)buf;
+
+        dev_dbg(hcd->self.controller,
+                "s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+                hcd, typeReq, wValue, wIndex, buf, wLength);
+
+        /* if we are only an humble host without any special capabilites
+         * process the request straight away and exit */
+
+        if (info == NULL) {
+                ret = ohci_hub_control(hcd, typeReq, wValue,
+                                       wIndex, buf, wLength);
+                goto out;
+        }
+
+        /* check the request to see if it needs handling */
+
+        switch (typeReq) {
+        case SetPortFeature:
+                if (wValue == USB_PORT_FEAT_POWER) {
+                        dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+                        s3c2410_usb_set_power(info, wIndex, 1);
+                        goto out;
+                }
+                break;
+
+        case ClearPortFeature:
+                switch (wValue) {
+                case USB_PORT_FEAT_C_OVER_CURRENT:
+                        dev_dbg(hcd->self.controller,
+                                "ClearPortFeature: C_OVER_CURRENT\n");
+
+                        if (valid_port(wIndex)) {
+                                info->port[wIndex-1].oc_changed = 0;
+                                info->port[wIndex-1].oc_status = 0;
+                        }
+
+                        goto out;
+
+                case USB_PORT_FEAT_OVER_CURRENT:
+                        dev_dbg(hcd->self.controller,
+                                "ClearPortFeature: OVER_CURRENT\n");
+
+                        if (valid_port(wIndex)) {
+                                info->port[wIndex-1].oc_status = 0;
+                        }
+
+                        goto out;
+
+                case USB_PORT_FEAT_POWER:
+                        dev_dbg(hcd->self.controller,
+                                "ClearPortFeature: POWER\n");
+
+                        if (valid_port(wIndex)) {
+                                s3c2410_usb_set_power(info, wIndex, 0);
+                                return 0;
+                        }
+                }
+                break;
+        }
+
+        ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+        if (ret)
+                goto out;
+
+        switch (typeReq) {
+        case GetHubDescriptor:
+
+                /* update the hub's descriptor */
+
+                desc = (struct usb_hub_descriptor *)buf;
+
+                if (info->power_control == NULL)
+                        return ret;
+
+                dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+                        desc->wHubCharacteristics);
+
+                /* remove the old configurations for power-switching, and
+                 * over-current protection, and insert our new configuration
+                 */
+
+                desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+                desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+                if (info->enable_oc) {
+                        desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+                        desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+                }
+
+                dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+                        desc->wHubCharacteristics);
+
+                return ret;
+
+        case GetPortStatus:
+                /* check port status */
+
+                dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+                if (valid_port(wIndex)) {
+                        if (info->port[wIndex-1].oc_changed) {
+                                *data |= cpu_to_le32(RH_PS_OCIC);
+                        }
+
+                        if (info->port[wIndex-1].oc_status) {
+                                *data |= cpu_to_le32(RH_PS_POCI);
+                        }
+                }
+        }
+
+ out:
+        return ret;
+}
+
+/* s3c2410_hcd_oc
+ *
+ * handle an over-current report
+*/
+
+static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+{
+        struct s3c2410_hcd_port *port;
+        struct usb_hcd *hcd;
+        unsigned long flags;
+        int portno;
+
+        if (info == NULL)
+                return;
+
+        port = &info->port[0];
+        hcd = info->hcd;
+
+        local_irq_save(flags);
+
+        for (portno = 0; portno < 2; port++, portno++) {
+                if (port_oc & (1<<portno) &&
+                    port->flags & S3C_HCDFLG_USED) {
+                        port->oc_status = 1;
+                        port->oc_changed = 1;
+
+                        /* ok, once over-current is detected,
+                           the port needs to be powered down */
+                        s3c2410_usb_set_power(info, portno+1, 0);
+                }
+        }
+
+        local_irq_restore(flags);
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_s3c2410_remove - shutdown processing for HCD
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_3c2410_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+*/
+
+void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+        usb_remove_hcd(hcd);
+        s3c2410_stop_hc(dev);
+        iounmap(hcd->regs);
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+        usb_put_hcd(hcd);
+}
+
+/**
+ * usb_hcd_s3c2410_probe - initialize S3C2410-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+                           struct platform_device *dev)
+{
+        struct usb_hcd *hcd = NULL;
+        int retval;
+
+        s3c2410_usb_set_power(dev->dev.platform_data, 0, 1);
+        s3c2410_usb_set_power(dev->dev.platform_data, 1, 1);
+
+        hcd = usb_create_hcd(driver, &dev->dev, "s3c24xx");
+        if (hcd == NULL)
+                return -ENOMEM;
+
+        hcd->rsrc_start = dev->resource[0].start;
+        hcd->rsrc_len   = dev->resource[0].end - dev->resource[0].start + 1;
+
+        if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+                dev_err(&dev->dev, "request_mem_region failed");
+                retval = -EBUSY;
+                goto err0;
+        }
+
+        clk = clk_get(NULL, "usb-host");
+        if (IS_ERR(clk)) {
+                dev_err(&dev->dev, "cannot get usb-host clock\n");
+                retval = -ENOENT;
+                goto err1;
+        }
+
+        clk_use(clk);
+        s3c2410_start_hc(dev, hcd);
+
+        hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+        if (!hcd->regs) {
+                dev_err(&dev->dev, "ioremap failed\n");
+                retval = -ENOMEM;
+                goto err2;
+        }
+
+        ohci_hcd_init(hcd_to_ohci(hcd));
+
+        retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+        if (retval != 0)
+                goto err2;
+
+        return 0;
+
+ err2:
+        s3c2410_stop_hc(dev);
+        iounmap(hcd->regs);
+        clk_unuse(clk);
+        clk_put(clk);
+
+ err1:
+        release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ err0:
+        usb_put_hcd(hcd);
+        return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+ohci_s3c2410_start (struct usb_hcd *hcd)
+{
+        struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+        int ret;
+
+        if ((ret = ohci_init(ohci)) < 0)
+                return ret;
+
+        if ((ret = ohci_run (ohci)) < 0) {
+                err ("can't start %s", hcd->self.bus_name);
+                ohci_stop (hcd);
+                return ret;
+        }
+
+        return 0;
+}
+
+
+static const struct hc_driver ohci_s3c2410_hc_driver = {
+        .description =          hcd_name,
+        .product_desc =         "S3C24XX OHCI",
+        .hcd_priv_size =        sizeof(struct ohci_hcd),
+
+        /*
+         * generic hardware linkage
+         */
+        .irq =                  ohci_irq,
+        .flags =                HCD_USB11 | HCD_MEMORY,
+
+        /*
+         * basic lifecycle operations
+         */
+        .start =                ohci_s3c2410_start,
+        .stop =                 ohci_stop,
+
+        /*
+         * managing i/o requests and associated device resources
+         */
+        .urb_enqueue =          ohci_urb_enqueue,
+        .urb_dequeue =          ohci_urb_dequeue,
+        .endpoint_disable =     ohci_endpoint_disable,
+
+        /*
+         * scheduling support
+         */
+        .get_frame_number =     ohci_get_frame,
+
+        /*
+         * root hub support
+         */
+        .hub_status_data =      ohci_s3c2410_hub_status_data,
+        .hub_control =          ohci_s3c2410_hub_control,
+
+#if defined(CONFIG_USB_SUSPEND) && 0
+        .hub_suspend =          ohci_hub_suspend,
+        .hub_resume =           ohci_hub_resume,
+#endif
+};
+
+/* device driver */
+
+static int ohci_hcd_s3c2410_drv_probe(struct device *dev)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        return usb_hcd_s3c2410_probe(&ohci_s3c2410_hc_driver, pdev);
+}
+
+static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
+{
+        struct platform_device *pdev = to_platform_device(dev);
+        struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+        usb_hcd_s3c2410_remove(hcd, pdev);
+        return 0;
+}
+
+static struct device_driver ohci_hcd_s3c2410_driver = {
+        .name           = "s3c2410-ohci",
+        .bus            = &platform_bus_type,
+        .probe          = ohci_hcd_s3c2410_drv_probe,
+        .remove         = ohci_hcd_s3c2410_drv_remove,
+        /*.suspend      = ohci_hcd_s3c2410_drv_suspend, */
+        /*.resume       = ohci_hcd_s3c2410_drv_resume, */
+};
+
+static int __init ohci_hcd_s3c2410_init (void)
+{
+        return driver_register(&ohci_hcd_s3c2410_driver);
+}
+
+static void __exit ohci_hcd_s3c2410_cleanup (void)
+{
+        driver_unregister(&ohci_hcd_s3c2410_driver);
+}
+
+module_init (ohci_hcd_s3c2410_init);
+module_exit (ohci_hcd_s3c2410_cleanup);