Merge git://git.marvell.com/orion into devel

12 files changed, 321 insertions, 11 deletions

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 9ed4e1b86674..c367ae44012e 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -180,6 +180,7 @@ CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_SHEEVAPLUG=y
+CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -852,13 +853,20 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -868,7 +876,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1271,7 +1283,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 532443622a17..b5421cccd7e1 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -26,6 +26,12 @@ config MACH_SHEEVAPLUG
           Say 'Y' here if you want your kernel to support the
           Marvell SheevaPlug Reference Board.
 
+config MACH_TS219
+        bool "QNAP TS-119 and TS-219 Turbo NAS"
+        help
+          Say 'Y' here if you want your kernel to support the
+          QNAP TS-119 and TS-219 Turbo NAS devices.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index de81b4b5bd33..8f03c9b9bdd9 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_MACH_DB88F6281_BP)		+= db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)        += rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)            += rd88f6281-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)           += sheevaplug-setup.o
+obj-$(CONFIG_MACH_TS219)                += ts219-setup.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 9f012551794d..19b03f62c3f4 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -14,6 +14,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mbus.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
 #include <linux/ata_platform.h>
 #include <linux/spi/orion_spi.h>
 #include <net/dsa.h>
@@ -371,6 +372,45 @@ void __init kirkwood_spi_init()
 
 
 /*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
+        .freq_m         = 8, /* assumes 166 MHz TCLK */
+        .freq_n         = 3,
+        .timeout        = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource kirkwood_i2c_resources[] = {
+        {
+                .name   = "i2c",
+                .start  = I2C_PHYS_BASE,
+                .end    = I2C_PHYS_BASE + 0x1f,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .name   = "i2c",
+                .start  = IRQ_KIRKWOOD_TWSI,
+                .end    = IRQ_KIRKWOOD_TWSI,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device kirkwood_i2c = {
+        .name           = MV64XXX_I2C_CTLR_NAME,
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(kirkwood_i2c_resources),
+        .resource       = kirkwood_i2c_resources,
+        .dev            = {
+                .platform_data  = &kirkwood_i2c_pdata,
+        },
+};
+
+void __init kirkwood_i2c_init(void)
+{
+        platform_device_register(&kirkwood_i2c);
+}
+
+
+/*****************************************************************************
  * UART0
  ****************************************************************************/
 static struct plat_serial8250_port kirkwood_uart0_data[] = {
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9e5282684d58..6ee88406f381 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -37,9 +37,11 @@ void kirkwood_pcie_init(void);
 void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
 void kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data);
 void kirkwood_spi_init(void);
+void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 
+extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
 
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index d3db30fe763b..38c986853590 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -93,6 +93,7 @@
 #define  DEVICE_ID              (DEV_BUS_VIRT_BASE | 0x0034)
 #define  RTC_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0300)
 #define  SPI_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x0600)
+#define  I2C_PHYS_BASE          (DEV_BUS_PHYS_BASE | 0x1000)
 #define  UART0_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2000)
 #define  UART0_VIRT_BASE        (DEV_BUS_VIRT_BASE | 0x2000)
 #define  UART1_PHYS_BASE        (DEV_BUS_PHYS_BASE | 0x2100)
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index 45cccb743107..e021a80c2caf 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -90,13 +90,13 @@
 
 #define MPP10_GPO               MPP( 10, 0x0, 0, 1, 1,   1,   1,   1    )
 #define MPP10_SPI_SCK           MPP( 10, 0x2, 0, 1, 1,   1,   1,   1    )
-#define MPP10_UArt0_TXD         MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
+#define MPP10_UART0_TXD         MPP( 10, 0X3, 0, 1, 1,   1,   1,   1    )
 #define MPP10_SATA1_ACTn        MPP( 10, 0x5, 0, 1, 0,   0,   1,   1    )
 #define MPP10_PTP_TRIG_GEN      MPP( 10, 0xc, 0, 1, 1,   1,   1,   1    )
 
 #define MPP11_GPIO              MPP( 11, 0x0, 1, 1, 1,   1,   1,   1    )
 #define MPP11_SPI_MISO          MPP( 11, 0x2, 1, 0, 1,   1,   1,   1    )
-#define MPP11_UArt0_RXD         MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
+#define MPP11_UART0_RXD         MPP( 11, 0x3, 1, 0, 1,   1,   1,   1    )
 #define MPP11_PTP_EVENT_REQ     MPP( 11, 0x4, 1, 0, 1,   1,   1,   1    )
 #define MPP11_PTP_TRIG_GEN      MPP( 11, 0xc, 0, 1, 1,   1,   1,   1    )
 #define MPP11_PTP_CLK           MPP( 11, 0xd, 1, 0, 1,   1,   1,   1    )
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
new file mode 100644
index 000000000000..dda5743cf3e0
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -0,0 +1,220 @@
+/*
+ *
+ * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+static struct mtd_partition qnap_ts219_partitions[] = {
+        {
+                .name           = "U-Boot",
+                .size           = 0x00080000,
+                .offset         = 0,
+                .mask_flags     = MTD_WRITEABLE,
+        }, {
+                .name           = "Kernel",
+                .size           = 0x00200000,
+                .offset         = 0x00200000,
+        }, {
+                .name           = "RootFS1",
+                .size           = 0x00900000,
+                .offset         = 0x00400000,
+        }, {
+                .name           = "RootFS2",
+                .size           = 0x00300000,
+                .offset         = 0x00d00000,
+        }, {
+                .name           = "U-Boot Config",
+                .size           = 0x00040000,
+                .offset         = 0x00080000,
+        }, {
+                .name           = "NAS Config",
+                .size           = 0x00140000,
+                .offset         = 0x000c0000,
+        },
+};
+
+static const struct flash_platform_data qnap_ts219_flash = {
+        .type           = "m25p128",
+        .name           = "spi_flash",
+        .parts          = qnap_ts219_partitions,
+        .nr_parts       = ARRAY_SIZE(qnap_ts219_partitions),
+};
+
+static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
+        {
+                .modalias       = "m25p80",
+                .platform_data  = &qnap_ts219_flash,
+                .irq            = -1,
+                .max_speed_hz   = 20000000,
+                .bus_num        = 0,
+                .chip_select    = 0,
+        },
+};
+
+static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
+        I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data qnap_ts219_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct gpio_keys_button qnap_ts219_buttons[] = {
+        {
+                .code           = KEY_COPY,
+                .gpio           = 15,
+                .desc           = "USB Copy",
+                .active_low     = 1,
+        },
+        {
+                .code           = KEY_RESTART,
+                .gpio           = 16,
+                .desc           = "Reset",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data qnap_ts219_button_data = {
+        .buttons        = qnap_ts219_buttons,
+        .nbuttons       = ARRAY_SIZE(qnap_ts219_buttons),
+};
+
+static struct platform_device qnap_ts219_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &qnap_ts219_button_data,
+        }
+};
+
+static unsigned int qnap_ts219_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP8_TW_SDA,
+        MPP9_TW_SCK,
+        MPP10_UART0_TXD,
+        MPP11_UART0_RXD,
+        MPP13_UART1_TXD,        /* PIC controller */
+        MPP14_UART1_RXD,        /* PIC controller */
+        MPP15_GPIO,             /* USB Copy button */
+        MPP16_GPIO,             /* Reset button */
+        MPP20_SATA1_ACTn,
+        MPP21_SATA0_ACTn,
+        MPP22_SATA1_PRESENTn,
+        MPP23_SATA0_PRESENTn,
+        0
+};
+
+
+/*****************************************************************************
+ * QNAP TS-x19 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)    (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_ts219_power_off(void)
+{
+        /* 19200 baud divisor */
+        const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+        pr_info("%s: triggering power-off...\n", __func__);
+
+        /* hijack UART1 and reset into sane state (19200,8n1) */
+        writel(0x83, UART1_REG(LCR));
+        writel(divisor & 0xff, UART1_REG(DLL));
+        writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+        writel(0x03, UART1_REG(LCR));
+        writel(0x00, UART1_REG(IER));
+        writel(0x00, UART1_REG(FCR));
+        writel(0x00, UART1_REG(MCR));
+
+        /* send the power-off command 'A' to PIC */
+        writel('A', UART1_REG(TX));
+}
+
+static void __init qnap_ts219_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+        kirkwood_mpp_conf(qnap_ts219_mpp_config);
+
+        kirkwood_uart0_init();
+        kirkwood_uart1_init(); /* A PIC controller is connected here. */
+        spi_register_board_info(qnap_ts219_spi_slave_info,
+                                ARRAY_SIZE(qnap_ts219_spi_slave_info));
+        kirkwood_spi_init();
+        kirkwood_i2c_init();
+        i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+        kirkwood_ge00_init(&qnap_ts219_ge00_data);
+        kirkwood_sata_init(&qnap_ts219_sata_data);
+        kirkwood_ehci_init();
+        platform_device_register(&qnap_ts219_button_device);
+
+        pm_power_off = qnap_ts219_power_off;
+
+}
+
+MACHINE_START(TS219, "QNAP TS-119/TS-219")
+        /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = qnap_ts219_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
index 0a314ddef658..0f9cdf458952 100644
--- a/arch/arm/mach-orion5x/ts78xx-fpga.h
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -6,8 +6,14 @@
  */
 enum fpga_ids {
         /* Technologic Systems */
-        TS7800_REV_B2 = FPGAID(0x00b480, 0x02),
-        TS7800_REV_B3 = FPGAID(0x00b480, 0x03),
+        TS7800_REV_1    = FPGAID(0x00b480, 0x01),
+        TS7800_REV_2    = FPGAID(0x00b480, 0x02),
+        TS7800_REV_3    = FPGAID(0x00b480, 0x03),
+        TS7800_REV_4    = FPGAID(0x00b480, 0x04),
+        TS7800_REV_5    = FPGAID(0x00b480, 0x05),
+
+        /* Unaffordable & Expensive */
+        UAE_DUMMY       = FPGAID(0xffffff, 0x01),
 };
 
 struct fpga_device {
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index f5191ddea085..9a6b397f972d 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -282,8 +282,11 @@ static void ts78xx_fpga_supports(void)
 {
         /* TODO: put this 'table' into ts78xx-fpga.h */
         switch (ts78xx_fpga.id) {
-        case TS7800_REV_B2:
-        case TS7800_REV_B3:
+        case TS7800_REV_1:
+        case TS7800_REV_2:
+        case TS7800_REV_3:
+        case TS7800_REV_4:
+        case TS7800_REV_5:
                 ts78xx_fpga.supports.ts_rtc.present = 1;
                 ts78xx_fpga.supports.ts_nand.present = 1;
                 break;
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index b4211d8b2ac7..945e0d237a1d 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Mar 12 18:01:45 2009
+# Last update: Mon Mar 23 20:09:01 2009
 #
 # machine_is_xxx        CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -2124,3 +2124,11 @@ mx27wallace		MACH_MX27WALLACE	MX27WALLACE		2133
 fmzwebmodul             MACH_FMZWEBMODUL        FMZWEBMODUL             2134
 rd78x00_masa            MACH_RD78X00_MASA       RD78X00_MASA            2135
 smallogger              MACH_SMALLOGGER         SMALLOGGER              2136
+ccw9p9215               MACH_CCW9P9215          CCW9P9215               2137
+dm355_leopard           MACH_DM355_LEOPARD      DM355_LEOPARD           2138
+ts219                   MACH_TS219              TS219                   2139
+tny_a9263               MACH_TNY_A9263          TNY_A9263               2140
+apollo                  MACH_APOLLO             APOLLO                  2141
+at91cap9stk             MACH_AT91CAP9STK        AT91CAP9STK             2142
+spc300                  MACH_SPC300             SPC300                  2143
+eko                     MACH_EKO                EKO                     2144
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 45f12dcd3716..e0263d2005ee 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -12,6 +12,7 @@
 #include <linux/bcd.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 
 #define RTC_TIME_REG_OFFS       0
@@ -119,6 +120,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev)
                 return -EINVAL;
         }
 
+        /* make sure it is actually functional */
+        if (rtc_time == 0x01000000) {
+                ssleep(1);
+                rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
+                if (rtc_time == 0x01000000) {
+                        dev_err(&pdev->dev, "internal RTC not ticking\n");
+                        return -ENODEV;
+                }
+        }
+
         platform_set_drvdata(pdev, pdata);
         pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
                                          &mv_rtc_ops, THIS_MODULE);