diff options
author | Paul Mundt <lethal@linux-sh.org> | 2006-09-27 03:32:13 -0400 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2006-09-27 03:32:13 -0400 |
commit | e108b2ca2349f510ce7d7f910eda89f71d710d84 (patch) | |
tree | b7724e3c2edd0157da9b66d50898fd6c741a61dd | |
parent | 56e8d7b5786dc2f7d1f701500f8914fd2c52b111 (diff) |
serial: Rework sh-sci for driver model.
sh-sci was turning in to an unmaintainable mess, especially with
regards to the port list. This cleans it up quite a bit, and
switches over to a platform device model where subtypes will
register their port list individually in their setup code.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
-rw-r--r-- | drivers/serial/sh-sci.c | 1146 | ||||
-rw-r--r-- | drivers/serial/sh-sci.h | 90 |
2 files changed, 467 insertions, 769 deletions
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index cbede06cac27..f336ba6778dd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * | 3 | * |
4 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) | 4 | * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) |
5 | * | 5 | * |
6 | * Copyright (C) 2002, 2003, 2004 Paul Mundt | 6 | * Copyright (C) 2002 - 2006 Paul Mundt |
7 | * | 7 | * |
8 | * based off of the old drivers/char/sh-sci.c by: | 8 | * based off of the old drivers/char/sh-sci.c by: |
9 | * | 9 | * |
@@ -20,10 +20,9 @@ | |||
20 | 20 | ||
21 | #undef DEBUG | 21 | #undef DEBUG |
22 | 22 | ||
23 | #include <linux/config.h> | ||
23 | #include <linux/module.h> | 24 | #include <linux/module.h> |
24 | #include <linux/errno.h> | 25 | #include <linux/errno.h> |
25 | #include <linux/signal.h> | ||
26 | #include <linux/sched.h> | ||
27 | #include <linux/timer.h> | 26 | #include <linux/timer.h> |
28 | #include <linux/interrupt.h> | 27 | #include <linux/interrupt.h> |
29 | #include <linux/tty.h> | 28 | #include <linux/tty.h> |
@@ -32,71 +31,77 @@ | |||
32 | #include <linux/major.h> | 31 | #include <linux/major.h> |
33 | #include <linux/string.h> | 32 | #include <linux/string.h> |
34 | #include <linux/sysrq.h> | 33 | #include <linux/sysrq.h> |
35 | #include <linux/fcntl.h> | ||
36 | #include <linux/ptrace.h> | ||
37 | #include <linux/ioport.h> | 34 | #include <linux/ioport.h> |
38 | #include <linux/mm.h> | 35 | #include <linux/mm.h> |
39 | #include <linux/slab.h> | ||
40 | #include <linux/init.h> | 36 | #include <linux/init.h> |
41 | #include <linux/delay.h> | 37 | #include <linux/delay.h> |
42 | #include <linux/console.h> | 38 | #include <linux/console.h> |
43 | #include <linux/bitops.h> | 39 | #include <linux/platform_device.h> |
44 | #include <linux/generic_serial.h> | ||
45 | 40 | ||
46 | #ifdef CONFIG_CPU_FREQ | 41 | #ifdef CONFIG_CPU_FREQ |
47 | #include <linux/notifier.h> | 42 | #include <linux/notifier.h> |
48 | #include <linux/cpufreq.h> | 43 | #include <linux/cpufreq.h> |
49 | #endif | 44 | #endif |
50 | 45 | ||
51 | #include <asm/system.h> | ||
52 | #include <asm/io.h> | ||
53 | #include <asm/irq.h> | ||
54 | #include <asm/uaccess.h> | ||
55 | |||
56 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | 46 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) |
57 | #include <asm/clock.h> | 47 | #include <asm/clock.h> |
58 | #endif | ||
59 | |||
60 | #ifdef CONFIG_SH_STANDARD_BIOS | ||
61 | #include <asm/sh_bios.h> | 48 | #include <asm/sh_bios.h> |
49 | #include <asm/kgdb.h> | ||
62 | #endif | 50 | #endif |
63 | 51 | ||
52 | #include <asm/sci.h> | ||
53 | |||
64 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) | 54 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
65 | #define SUPPORT_SYSRQ | 55 | #define SUPPORT_SYSRQ |
66 | #endif | 56 | #endif |
67 | 57 | ||
68 | #include "sh-sci.h" | 58 | #include "sh-sci.h" |
69 | 59 | ||
70 | #ifdef CONFIG_SH_KGDB | 60 | struct sci_port { |
71 | #include <asm/kgdb.h> | 61 | struct uart_port port; |
62 | |||
63 | /* Port type */ | ||
64 | unsigned int type; | ||
65 | |||
66 | /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ | ||
67 | unsigned int irqs[SCIx_NR_IRQS]; | ||
68 | |||
69 | /* Port pin configuration */ | ||
70 | void (*init_pins)(struct uart_port *port, | ||
71 | unsigned int cflag); | ||
72 | 72 | ||
73 | static int kgdb_get_char(struct sci_port *port); | 73 | /* Port enable callback */ |
74 | static void kgdb_put_char(struct sci_port *port, char c); | 74 | void (*enable)(struct uart_port *port); |
75 | static void kgdb_handle_error(struct sci_port *port); | 75 | |
76 | /* Port disable callback */ | ||
77 | void (*disable)(struct uart_port *port); | ||
78 | |||
79 | /* Break timer */ | ||
80 | struct timer_list break_timer; | ||
81 | int break_flag; | ||
82 | }; | ||
83 | |||
84 | #ifdef CONFIG_SH_KGDB | ||
76 | static struct sci_port *kgdb_sci_port; | 85 | static struct sci_port *kgdb_sci_port; |
77 | #endif /* CONFIG_SH_KGDB */ | 86 | #endif |
78 | 87 | ||
79 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | 88 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
80 | static struct sci_port *serial_console_port = 0; | 89 | static struct sci_port *serial_console_port; |
81 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 90 | #endif |
82 | 91 | ||
83 | /* Function prototypes */ | 92 | /* Function prototypes */ |
84 | static void sci_stop_tx(struct uart_port *port); | 93 | static void sci_stop_tx(struct uart_port *port); |
85 | static void sci_start_tx(struct uart_port *port); | ||
86 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start); | ||
87 | static void sci_stop_rx(struct uart_port *port); | ||
88 | static int sci_request_irq(struct sci_port *port); | ||
89 | static void sci_free_irq(struct sci_port *port); | ||
90 | |||
91 | static struct sci_port sci_ports[]; | ||
92 | static struct uart_driver sci_uart_driver; | ||
93 | 94 | ||
94 | #define SCI_NPORTS sci_uart_driver.nr | 95 | #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS |
95 | 96 | ||
96 | #if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) | 97 | static struct sci_port sci_ports[SCI_NPORTS]; |
98 | static struct uart_driver sci_uart_driver; | ||
97 | 99 | ||
98 | static void handle_error(struct uart_port *port) | 100 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && \ |
99 | { /* Clear error flags */ | 101 | defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) |
102 | static inline void handle_error(struct uart_port *port) | ||
103 | { | ||
104 | /* Clear error flags */ | ||
100 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); | 105 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); |
101 | } | 106 | } |
102 | 107 | ||
@@ -106,8 +111,8 @@ static int get_char(struct uart_port *port) | |||
106 | unsigned short status; | 111 | unsigned short status; |
107 | int c; | 112 | int c; |
108 | 113 | ||
109 | local_irq_save(flags); | 114 | spin_lock_irqsave(&port->lock, flags); |
110 | do { | 115 | do { |
111 | status = sci_in(port, SCxSR); | 116 | status = sci_in(port, SCxSR); |
112 | if (status & SCxSR_ERRORS(port)) { | 117 | if (status & SCxSR_ERRORS(port)) { |
113 | handle_error(port); | 118 | handle_error(port); |
@@ -117,38 +122,19 @@ static int get_char(struct uart_port *port) | |||
117 | c = sci_in(port, SCxRDR); | 122 | c = sci_in(port, SCxRDR); |
118 | sci_in(port, SCxSR); /* Dummy read */ | 123 | sci_in(port, SCxSR); /* Dummy read */ |
119 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | 124 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); |
120 | local_irq_restore(flags); | 125 | spin_unlock_irqrestore(&port->lock, flags); |
121 | 126 | ||
122 | return c; | 127 | return c; |
123 | } | 128 | } |
124 | |||
125 | /* Taken from sh-stub.c of GDB 4.18 */ | ||
126 | static const char hexchars[] = "0123456789abcdef"; | ||
127 | |||
128 | static __inline__ char highhex(int x) | ||
129 | { | ||
130 | return hexchars[(x >> 4) & 0xf]; | ||
131 | } | ||
132 | |||
133 | static __inline__ char lowhex(int x) | ||
134 | { | ||
135 | return hexchars[x & 0xf]; | ||
136 | } | ||
137 | |||
138 | #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ | 129 | #endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ |
139 | 130 | ||
140 | /* | 131 | #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SH_KGDB) |
141 | * Send the packet in buffer. The host gets one chance to read it. | ||
142 | * This routine does not wait for a positive acknowledge. | ||
143 | */ | ||
144 | |||
145 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | ||
146 | static void put_char(struct uart_port *port, char c) | 132 | static void put_char(struct uart_port *port, char c) |
147 | { | 133 | { |
148 | unsigned long flags; | 134 | unsigned long flags; |
149 | unsigned short status; | 135 | unsigned short status; |
150 | 136 | ||
151 | local_irq_save(flags); | 137 | spin_lock_irqsave(&port->lock, flags); |
152 | 138 | ||
153 | do { | 139 | do { |
154 | status = sci_in(port, SCxSR); | 140 | status = sci_in(port, SCxSR); |
@@ -158,9 +144,11 @@ static void put_char(struct uart_port *port, char c) | |||
158 | sci_in(port, SCxSR); /* Dummy read */ | 144 | sci_in(port, SCxSR); /* Dummy read */ |
159 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | 145 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); |
160 | 146 | ||
161 | local_irq_restore(flags); | 147 | spin_unlock_irqrestore(&port->lock, flags); |
162 | } | 148 | } |
149 | #endif | ||
163 | 150 | ||
151 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | ||
164 | static void put_string(struct sci_port *sci_port, const char *buffer, int count) | 152 | static void put_string(struct sci_port *sci_port, const char *buffer, int count) |
165 | { | 153 | { |
166 | struct uart_port *port = &sci_port->port; | 154 | struct uart_port *port = &sci_port->port; |
@@ -213,96 +201,28 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count) | |||
213 | } | 201 | } |
214 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 202 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ |
215 | 203 | ||
216 | |||
217 | #ifdef CONFIG_SH_KGDB | 204 | #ifdef CONFIG_SH_KGDB |
218 | |||
219 | /* Is the SCI ready, ie is there a char waiting? */ | ||
220 | static int kgdb_is_char_ready(struct sci_port *port) | ||
221 | { | ||
222 | unsigned short status = sci_in(port, SCxSR); | ||
223 | |||
224 | if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port))) | ||
225 | kgdb_handle_error(port); | ||
226 | |||
227 | return (status & SCxSR_RDxF(port)); | ||
228 | } | ||
229 | |||
230 | /* Write a char */ | ||
231 | static void kgdb_put_char(struct sci_port *port, char c) | ||
232 | { | ||
233 | unsigned short status; | ||
234 | |||
235 | do | ||
236 | status = sci_in(port, SCxSR); | ||
237 | while (!(status & SCxSR_TDxE(port))); | ||
238 | |||
239 | sci_out(port, SCxTDR, c); | ||
240 | sci_in(port, SCxSR); /* Dummy read */ | ||
241 | sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); | ||
242 | } | ||
243 | |||
244 | /* Get a char if there is one, else ret -1 */ | ||
245 | static int kgdb_get_char(struct sci_port *port) | ||
246 | { | ||
247 | int c; | ||
248 | |||
249 | if (kgdb_is_char_ready(port) == 0) | ||
250 | c = -1; | ||
251 | else { | ||
252 | c = sci_in(port, SCxRDR); | ||
253 | sci_in(port, SCxSR); /* Dummy read */ | ||
254 | sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); | ||
255 | } | ||
256 | |||
257 | return c; | ||
258 | } | ||
259 | |||
260 | /* Called from kgdbstub.c to get a character, i.e. is blocking */ | ||
261 | static int kgdb_sci_getchar(void) | 205 | static int kgdb_sci_getchar(void) |
262 | { | 206 | { |
263 | volatile int c; | 207 | int c; |
264 | 208 | ||
265 | /* Keep trying to read a character, this could be neater */ | 209 | /* Keep trying to read a character, this could be neater */ |
266 | while ((c = kgdb_get_char(kgdb_sci_port)) < 0); | 210 | while ((c = get_char(kgdb_sci_port)) < 0) |
211 | cpu_relax(); | ||
267 | 212 | ||
268 | return c; | 213 | return c; |
269 | } | 214 | } |
270 | 215 | ||
271 | /* Called from kgdbstub.c to put a character, just a wrapper */ | 216 | static inline void kgdb_sci_putchar(int c) |
272 | static void kgdb_sci_putchar(int c) | ||
273 | { | ||
274 | |||
275 | kgdb_put_char(kgdb_sci_port, c); | ||
276 | } | ||
277 | |||
278 | /* Clear any errors on the SCI */ | ||
279 | static void kgdb_handle_error(struct sci_port *port) | ||
280 | { | 217 | { |
281 | sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */ | 218 | put_char(kgdb_sci_port, c); |
282 | } | 219 | } |
283 | |||
284 | /* Breakpoint if there's a break sent on the serial port */ | ||
285 | static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs) | ||
286 | { | ||
287 | struct sci_port *port = ptr; | ||
288 | unsigned short status = sci_in(port, SCxSR); | ||
289 | |||
290 | if (status & SCxSR_BRK(port)) { | ||
291 | |||
292 | /* Break into the debugger if a break is detected */ | ||
293 | BREAKPOINT(); | ||
294 | |||
295 | /* Clear */ | ||
296 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); | ||
297 | } | ||
298 | } | ||
299 | |||
300 | #endif /* CONFIG_SH_KGDB */ | 220 | #endif /* CONFIG_SH_KGDB */ |
301 | 221 | ||
302 | #if defined(__H8300S__) | 222 | #if defined(__H8300S__) |
303 | enum { sci_disable, sci_enable }; | 223 | enum { sci_disable, sci_enable }; |
304 | 224 | ||
305 | static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl) | 225 | static void h8300_sci_config(struct uart_port* port, unsigned int ctrl) |
306 | { | 226 | { |
307 | volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL; | 227 | volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL; |
308 | int ch = (port->mapbase - SMR0) >> 3; | 228 | int ch = (port->mapbase - SMR0) >> 3; |
@@ -314,32 +234,66 @@ static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl) | |||
314 | *mstpcrl &= ~mask; | 234 | *mstpcrl &= ~mask; |
315 | } | 235 | } |
316 | } | 236 | } |
237 | |||
238 | static inline void h8300_sci_enable(struct uart_port *port) | ||
239 | { | ||
240 | h8300_sci_config(port, sci_enable); | ||
241 | } | ||
242 | |||
243 | static inline void h8300_sci_disable(struct uart_port *port) | ||
244 | { | ||
245 | h8300_sci_config(port, sci_disable); | ||
246 | } | ||
317 | #endif | 247 | #endif |
318 | 248 | ||
319 | #if defined(SCI_ONLY) || defined(SCI_AND_SCIF) | 249 | #if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ |
320 | #if defined(__H8300H__) || defined(__H8300S__) | 250 | defined(__H8300H__) || defined(__H8300S__) |
321 | static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) | 251 | static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) |
322 | { | 252 | { |
323 | int ch = (port->mapbase - SMR0) >> 3; | 253 | int ch = (port->mapbase - SMR0) >> 3; |
324 | 254 | ||
325 | /* set DDR regs */ | 255 | /* set DDR regs */ |
326 | H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT); | 256 | H8300_GPIO_DDR(h8300_sci_pins[ch].port, |
327 | H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT); | 257 | h8300_sci_pins[ch].rx, |
258 | H8300_GPIO_INPUT); | ||
259 | H8300_GPIO_DDR(h8300_sci_pins[ch].port, | ||
260 | h8300_sci_pins[ch].tx, | ||
261 | H8300_GPIO_OUTPUT); | ||
262 | |||
328 | /* tx mark output*/ | 263 | /* tx mark output*/ |
329 | H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; | 264 | H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; |
330 | } | 265 | } |
266 | #else | ||
267 | #define sci_init_pins_sci NULL | ||
268 | #endif | ||
269 | |||
270 | #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
271 | static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) | ||
272 | { | ||
273 | unsigned int fcr_val = 0; | ||
274 | |||
275 | if (cflag & CRTSCTS) | ||
276 | fcr_val |= SCFCR_MCE; | ||
277 | |||
278 | sci_out(port, SCFCR, fcr_val); | ||
279 | } | ||
280 | #else | ||
281 | #define sci_init_pins_irda NULL | ||
331 | #endif | 282 | #endif |
283 | |||
284 | #ifdef SCI_ONLY | ||
285 | #define sci_init_pins_scif NULL | ||
332 | #endif | 286 | #endif |
333 | 287 | ||
334 | #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) | 288 | #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) |
335 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) | 289 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) |
336 | /* SH7300 doesn't use RTS/CTS */ | 290 | /* SH7300 doesn't use RTS/CTS */ |
337 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 291 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
338 | { | 292 | { |
339 | sci_out(port, SCFCR, 0); | 293 | sci_out(port, SCFCR, 0); |
340 | } | 294 | } |
341 | #elif defined(CONFIG_CPU_SH3) | 295 | #elif defined(CONFIG_CPU_SH3) |
342 | /* For SH7705, SH7707, SH7709, SH7709A, SH7729 */ | 296 | /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ |
343 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 297 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
344 | { | 298 | { |
345 | unsigned int fcr_val = 0; | 299 | unsigned int fcr_val = 0; |
@@ -366,20 +320,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
366 | 320 | ||
367 | sci_out(port, SCFCR, fcr_val); | 321 | sci_out(port, SCFCR, fcr_val); |
368 | } | 322 | } |
369 | |||
370 | #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
371 | static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) | ||
372 | { | ||
373 | unsigned int fcr_val = 0; | ||
374 | |||
375 | if (cflag & CRTSCTS) | ||
376 | fcr_val |= SCFCR_MCE; | ||
377 | |||
378 | sci_out(port, SCFCR, fcr_val); | ||
379 | } | ||
380 | #endif | ||
381 | #else | 323 | #else |
382 | |||
383 | /* For SH7750 */ | 324 | /* For SH7750 */ |
384 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | 325 | static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) |
385 | { | 326 | { |
@@ -388,7 +329,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
388 | if (cflag & CRTSCTS) { | 329 | if (cflag & CRTSCTS) { |
389 | fcr_val |= SCFCR_MCE; | 330 | fcr_val |= SCFCR_MCE; |
390 | } else { | 331 | } else { |
391 | #ifdef CONFIG_CPU_SUBTYPE_SH7780 | 332 | #ifdef CONFIG_CPU_SUBTYPE_SH7343 |
333 | /* Nothing */ | ||
334 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
392 | ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ | 335 | ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ |
393 | #else | 336 | #else |
394 | ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ | 337 | ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ |
@@ -396,10 +339,41 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) | |||
396 | } | 339 | } |
397 | sci_out(port, SCFCR, fcr_val); | 340 | sci_out(port, SCFCR, fcr_val); |
398 | } | 341 | } |
342 | #endif | ||
343 | |||
344 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
345 | static inline int scif_txroom(struct uart_port *port) | ||
346 | { | ||
347 | return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); | ||
348 | } | ||
349 | |||
350 | static inline int scif_rxroom(struct uart_port *port) | ||
351 | { | ||
352 | return sci_in(port, SCRFDR) & 0x7f; | ||
353 | } | ||
354 | #else | ||
355 | static inline int scif_txroom(struct uart_port *port) | ||
356 | { | ||
357 | return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); | ||
358 | } | ||
399 | 359 | ||
360 | static inline int scif_rxroom(struct uart_port *port) | ||
361 | { | ||
362 | return sci_in(port, SCFDR) & SCIF_RFDC_MASK; | ||
363 | } | ||
400 | #endif | 364 | #endif |
401 | #endif /* SCIF_ONLY || SCI_AND_SCIF */ | 365 | #endif /* SCIF_ONLY || SCI_AND_SCIF */ |
402 | 366 | ||
367 | static inline int sci_txroom(struct uart_port *port) | ||
368 | { | ||
369 | return ((sci_in(port, SCxSR) & SCI_TDRE) != 0); | ||
370 | } | ||
371 | |||
372 | static inline int sci_rxroom(struct uart_port *port) | ||
373 | { | ||
374 | return ((sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0); | ||
375 | } | ||
376 | |||
403 | /* ********************************************************************** * | 377 | /* ********************************************************************** * |
404 | * the interrupt related routines * | 378 | * the interrupt related routines * |
405 | * ********************************************************************** */ | 379 | * ********************************************************************** */ |
@@ -408,14 +382,12 @@ static void sci_transmit_chars(struct uart_port *port) | |||
408 | { | 382 | { |
409 | struct circ_buf *xmit = &port->info->xmit; | 383 | struct circ_buf *xmit = &port->info->xmit; |
410 | unsigned int stopped = uart_tx_stopped(port); | 384 | unsigned int stopped = uart_tx_stopped(port); |
411 | unsigned long flags; | ||
412 | unsigned short status; | 385 | unsigned short status; |
413 | unsigned short ctrl; | 386 | unsigned short ctrl; |
414 | int count, txroom; | 387 | int count; |
415 | 388 | ||
416 | status = sci_in(port, SCxSR); | 389 | status = sci_in(port, SCxSR); |
417 | if (!(status & SCxSR_TDxE(port))) { | 390 | if (!(status & SCxSR_TDxE(port))) { |
418 | local_irq_save(flags); | ||
419 | ctrl = sci_in(port, SCSCR); | 391 | ctrl = sci_in(port, SCSCR); |
420 | if (uart_circ_empty(xmit)) { | 392 | if (uart_circ_empty(xmit)) { |
421 | ctrl &= ~SCI_CTRL_FLAGS_TIE; | 393 | ctrl &= ~SCI_CTRL_FLAGS_TIE; |
@@ -423,25 +395,15 @@ static void sci_transmit_chars(struct uart_port *port) | |||
423 | ctrl |= SCI_CTRL_FLAGS_TIE; | 395 | ctrl |= SCI_CTRL_FLAGS_TIE; |
424 | } | 396 | } |
425 | sci_out(port, SCSCR, ctrl); | 397 | sci_out(port, SCSCR, ctrl); |
426 | local_irq_restore(flags); | ||
427 | return; | 398 | return; |
428 | } | 399 | } |
429 | 400 | ||
430 | #if !defined(SCI_ONLY) | 401 | #ifndef SCI_ONLY |
431 | if (port->type == PORT_SCIF) { | 402 | if (port->type == PORT_SCIF) |
432 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | 403 | count = scif_txroom(port); |
433 | txroom = SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); | 404 | else |
434 | #else | ||
435 | txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8); | ||
436 | #endif | ||
437 | } else { | ||
438 | txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; | ||
439 | } | ||
440 | #else | ||
441 | txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; | ||
442 | #endif | 405 | #endif |
443 | 406 | count = sci_txroom(port); | |
444 | count = txroom; | ||
445 | 407 | ||
446 | do { | 408 | do { |
447 | unsigned char c; | 409 | unsigned char c; |
@@ -468,7 +430,6 @@ static void sci_transmit_chars(struct uart_port *port) | |||
468 | if (uart_circ_empty(xmit)) { | 430 | if (uart_circ_empty(xmit)) { |
469 | sci_stop_tx(port); | 431 | sci_stop_tx(port); |
470 | } else { | 432 | } else { |
471 | local_irq_save(flags); | ||
472 | ctrl = sci_in(port, SCSCR); | 433 | ctrl = sci_in(port, SCSCR); |
473 | 434 | ||
474 | #if !defined(SCI_ONLY) | 435 | #if !defined(SCI_ONLY) |
@@ -480,7 +441,6 @@ static void sci_transmit_chars(struct uart_port *port) | |||
480 | 441 | ||
481 | ctrl |= SCI_CTRL_FLAGS_TIE; | 442 | ctrl |= SCI_CTRL_FLAGS_TIE; |
482 | sci_out(port, SCSCR, ctrl); | 443 | sci_out(port, SCSCR, ctrl); |
483 | local_irq_restore(flags); | ||
484 | } | 444 | } |
485 | } | 445 | } |
486 | 446 | ||
@@ -490,6 +450,7 @@ static void sci_transmit_chars(struct uart_port *port) | |||
490 | static inline void sci_receive_chars(struct uart_port *port, | 450 | static inline void sci_receive_chars(struct uart_port *port, |
491 | struct pt_regs *regs) | 451 | struct pt_regs *regs) |
492 | { | 452 | { |
453 | struct sci_port *sci_port = (struct sci_port *)port; | ||
493 | struct tty_struct *tty = port->info->tty; | 454 | struct tty_struct *tty = port->info->tty; |
494 | int i, count, copied = 0; | 455 | int i, count, copied = 0; |
495 | unsigned short status; | 456 | unsigned short status; |
@@ -501,18 +462,11 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
501 | 462 | ||
502 | while (1) { | 463 | while (1) { |
503 | #if !defined(SCI_ONLY) | 464 | #if !defined(SCI_ONLY) |
504 | if (port->type == PORT_SCIF) { | 465 | if (port->type == PORT_SCIF) |
505 | #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) | 466 | count = scif_rxroom(port); |
506 | count = sci_in(port, SCRFDR) & 0x7f; | 467 | else |
507 | #else | ||
508 | count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ; | ||
509 | #endif | ||
510 | } else { | ||
511 | count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; | ||
512 | } | ||
513 | #else | ||
514 | count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; | ||
515 | #endif | 468 | #endif |
469 | count = sci_rxroom(port); | ||
516 | 470 | ||
517 | /* Don't copy more bytes than there is room for in the buffer */ | 471 | /* Don't copy more bytes than there is room for in the buffer */ |
518 | count = tty_buffer_request_room(tty, count); | 472 | count = tty_buffer_request_room(tty, count); |
@@ -523,11 +477,10 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
523 | 477 | ||
524 | if (port->type == PORT_SCI) { | 478 | if (port->type == PORT_SCI) { |
525 | char c = sci_in(port, SCxRDR); | 479 | char c = sci_in(port, SCxRDR); |
526 | if(((struct sci_port *)port)->break_flag | 480 | if (uart_handle_sysrq_char(port, c, regs) || sci_port->break_flag) |
527 | || uart_handle_sysrq_char(port, c, regs)) { | ||
528 | count = 0; | 481 | count = 0; |
529 | } else { | 482 | else { |
530 | tty_insert_flip_char(tty, c, TTY_NORMAL); | 483 | tty_insert_flip_char(tty, c, TTY_NORMAL); |
531 | } | 484 | } |
532 | } else { | 485 | } else { |
533 | for (i=0; i<count; i++) { | 486 | for (i=0; i<count; i++) { |
@@ -535,15 +488,17 @@ static inline void sci_receive_chars(struct uart_port *port, | |||
535 | status = sci_in(port, SCxSR); | 488 | status = sci_in(port, SCxSR); |
536 | #if defined(CONFIG_CPU_SH3) | 489 | #if defined(CONFIG_CPU_SH3) |
537 | /* Skip "chars" during break */ | 490 | /* Skip "chars" during break */ |
538 | if (((struct sci_port *)port)->break_flag) { | 491 | if (sci_port->break_flag) { |
539 | if ((c == 0) && | 492 | if ((c == 0) && |
540 | (status & SCxSR_FER(port))) { | 493 | (status & SCxSR_FER(port))) { |
541 | count--; i--; | 494 | count--; i--; |
542 | continue; | 495 | continue; |
543 | } | 496 | } |
497 | |||
544 | /* Nonzero => end-of-break */ | 498 | /* Nonzero => end-of-break */ |
545 | pr_debug("scif: debounce<%02x>\n", c); | 499 | pr_debug("scif: debounce<%02x>\n", c); |
546 | ((struct sci_port *)port)->break_flag = 0; | 500 | sci_port->break_flag = 0; |
501 | |||
547 | if (STEPFN(c)) { | 502 | if (STEPFN(c)) { |
548 | count--; i--; | 503 | count--; i--; |
549 | continue; | 504 | continue; |
@@ -600,15 +555,17 @@ static void sci_schedule_break_timer(struct sci_port *port) | |||
600 | /* Ensure that two consecutive samples find the break over. */ | 555 | /* Ensure that two consecutive samples find the break over. */ |
601 | static void sci_break_timer(unsigned long data) | 556 | static void sci_break_timer(unsigned long data) |
602 | { | 557 | { |
603 | struct sci_port * port = (struct sci_port *)data; | 558 | struct sci_port *port = (struct sci_port *)data; |
604 | if(sci_rxd_in(&port->port) == 0) { | 559 | |
560 | if (sci_rxd_in(&port->port) == 0) { | ||
605 | port->break_flag = 1; | 561 | port->break_flag = 1; |
606 | sci_schedule_break_timer(port); | 562 | sci_schedule_break_timer(port); |
607 | } else if(port->break_flag == 1){ | 563 | } else if (port->break_flag == 1) { |
608 | /* break is over. */ | 564 | /* break is over. */ |
609 | port->break_flag = 2; | 565 | port->break_flag = 2; |
610 | sci_schedule_break_timer(port); | 566 | sci_schedule_break_timer(port); |
611 | } else port->break_flag = 0; | 567 | } else |
568 | port->break_flag = 0; | ||
612 | } | 569 | } |
613 | 570 | ||
614 | static inline int sci_handle_errors(struct uart_port *port) | 571 | static inline int sci_handle_errors(struct uart_port *port) |
@@ -617,40 +574,41 @@ static inline int sci_handle_errors(struct uart_port *port) | |||
617 | unsigned short status = sci_in(port, SCxSR); | 574 | unsigned short status = sci_in(port, SCxSR); |
618 | struct tty_struct *tty = port->info->tty; | 575 | struct tty_struct *tty = port->info->tty; |
619 | 576 | ||
620 | if (status&SCxSR_ORER(port)) { | 577 | if (status & SCxSR_ORER(port)) { |
621 | /* overrun error */ | 578 | /* overrun error */ |
622 | if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) | 579 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) |
623 | copied++; | 580 | copied++; |
624 | pr_debug("sci: overrun error\n"); | 581 | pr_debug("sci: overrun error\n"); |
625 | } | 582 | } |
626 | 583 | ||
627 | if (status&SCxSR_FER(port)) { | 584 | if (status & SCxSR_FER(port)) { |
628 | if (sci_rxd_in(port) == 0) { | 585 | if (sci_rxd_in(port) == 0) { |
629 | /* Notify of BREAK */ | 586 | /* Notify of BREAK */ |
630 | struct sci_port * sci_port = (struct sci_port *)port; | 587 | struct sci_port *sci_port = (struct sci_port *)port; |
631 | if(!sci_port->break_flag) { | 588 | |
632 | sci_port->break_flag = 1; | 589 | if (!sci_port->break_flag) { |
633 | sci_schedule_break_timer((struct sci_port *)port); | 590 | sci_port->break_flag = 1; |
591 | sci_schedule_break_timer(sci_port); | ||
592 | |||
634 | /* Do sysrq handling. */ | 593 | /* Do sysrq handling. */ |
635 | if(uart_handle_break(port)) | 594 | if (uart_handle_break(port)) |
636 | return 0; | 595 | return 0; |
637 | pr_debug("sci: BREAK detected\n"); | 596 | pr_debug("sci: BREAK detected\n"); |
638 | if(tty_insert_flip_char(tty, 0, TTY_BREAK)) | 597 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
639 | copied++; | 598 | copied++; |
640 | } | 599 | } |
641 | } | 600 | } else { |
642 | else { | ||
643 | /* frame error */ | 601 | /* frame error */ |
644 | if(tty_insert_flip_char(tty, 0, TTY_FRAME)) | 602 | if (tty_insert_flip_char(tty, 0, TTY_FRAME)) |
645 | copied++; | 603 | copied++; |
646 | pr_debug("sci: frame error\n"); | 604 | pr_debug("sci: frame error\n"); |
647 | } | 605 | } |
648 | } | 606 | } |
649 | 607 | ||
650 | if (status&SCxSR_PER(port)) { | 608 | if (status & SCxSR_PER(port)) { |
651 | if(tty_insert_flip_char(tty, 0, TTY_PARITY)) | ||
652 | copied++; | ||
653 | /* parity error */ | 609 | /* parity error */ |
610 | if (tty_insert_flip_char(tty, 0, TTY_PARITY)) | ||
611 | copied++; | ||
654 | pr_debug("sci: parity error\n"); | 612 | pr_debug("sci: parity error\n"); |
655 | } | 613 | } |
656 | 614 | ||
@@ -673,7 +631,7 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
673 | s->break_flag = 1; | 631 | s->break_flag = 1; |
674 | #endif | 632 | #endif |
675 | /* Notify of BREAK */ | 633 | /* Notify of BREAK */ |
676 | if(tty_insert_flip_char(tty, 0, TTY_BREAK)) | 634 | if (tty_insert_flip_char(tty, 0, TTY_BREAK)) |
677 | copied++; | 635 | copied++; |
678 | pr_debug("sci: BREAK detected\n"); | 636 | pr_debug("sci: BREAK detected\n"); |
679 | } | 637 | } |
@@ -682,7 +640,7 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
682 | /* XXX: Handle SCIF overrun error */ | 640 | /* XXX: Handle SCIF overrun error */ |
683 | if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { | 641 | if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { |
684 | sci_out(port, SCLSR, 0); | 642 | sci_out(port, SCLSR, 0); |
685 | if(tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { | 643 | if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { |
686 | copied++; | 644 | copied++; |
687 | pr_debug("sci: overrun error\n"); | 645 | pr_debug("sci: overrun error\n"); |
688 | } | 646 | } |
@@ -691,13 +649,12 @@ static inline int sci_handle_breaks(struct uart_port *port) | |||
691 | 649 | ||
692 | if (copied) | 650 | if (copied) |
693 | tty_flip_buffer_push(tty); | 651 | tty_flip_buffer_push(tty); |
652 | |||
694 | return copied; | 653 | return copied; |
695 | } | 654 | } |
696 | 655 | ||
697 | static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs) | 656 | static irqreturn_t sci_rx_interrupt(int irq, void *port, struct pt_regs *regs) |
698 | { | 657 | { |
699 | struct uart_port *port = ptr; | ||
700 | |||
701 | /* I think sci_receive_chars has to be called irrespective | 658 | /* I think sci_receive_chars has to be called irrespective |
702 | * of whether the I_IXOFF is set, otherwise, how is the interrupt | 659 | * of whether the I_IXOFF is set, otherwise, how is the interrupt |
703 | * to be disabled? | 660 | * to be disabled? |
@@ -711,7 +668,9 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
711 | { | 668 | { |
712 | struct uart_port *port = ptr; | 669 | struct uart_port *port = ptr; |
713 | 670 | ||
671 | spin_lock_irq(&port->lock); | ||
714 | sci_transmit_chars(port); | 672 | sci_transmit_chars(port); |
673 | spin_unlock_irq(&port->lock); | ||
715 | 674 | ||
716 | return IRQ_HANDLED; | 675 | return IRQ_HANDLED; |
717 | } | 676 | } |
@@ -755,6 +714,12 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
755 | 714 | ||
756 | /* Handle BREAKs */ | 715 | /* Handle BREAKs */ |
757 | sci_handle_breaks(port); | 716 | sci_handle_breaks(port); |
717 | |||
718 | #ifdef CONFIG_SH_KGDB | ||
719 | /* Break into the debugger if a break is detected */ | ||
720 | BREAKPOINT(); | ||
721 | #endif | ||
722 | |||
758 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); | 723 | sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); |
759 | 724 | ||
760 | return IRQ_HANDLED; | 725 | return IRQ_HANDLED; |
@@ -769,16 +734,16 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
769 | scr_status = sci_in(port,SCSCR); | 734 | scr_status = sci_in(port,SCSCR); |
770 | 735 | ||
771 | /* Tx Interrupt */ | 736 | /* Tx Interrupt */ |
772 | if ((ssr_status&0x0020) && (scr_status&0x0080)) | 737 | if ((ssr_status & 0x0020) && (scr_status & 0x0080)) |
773 | sci_tx_interrupt(irq, ptr, regs); | 738 | sci_tx_interrupt(irq, ptr, regs); |
774 | /* Rx Interrupt */ | 739 | /* Rx Interrupt */ |
775 | if ((ssr_status&0x0002) && (scr_status&0x0040)) | 740 | if ((ssr_status & 0x0002) && (scr_status & 0x0040)) |
776 | sci_rx_interrupt(irq, ptr, regs); | 741 | sci_rx_interrupt(irq, ptr, regs); |
777 | /* Error Interrupt */ | 742 | /* Error Interrupt */ |
778 | if ((ssr_status&0x0080) && (scr_status&0x0400)) | 743 | if ((ssr_status & 0x0080) && (scr_status & 0x0400)) |
779 | sci_er_interrupt(irq, ptr, regs); | 744 | sci_er_interrupt(irq, ptr, regs); |
780 | /* Break Interrupt */ | 745 | /* Break Interrupt */ |
781 | if ((ssr_status&0x0010) && (scr_status&0x0200)) | 746 | if ((ssr_status & 0x0010) && (scr_status & 0x0200)) |
782 | sci_br_interrupt(irq, ptr, regs); | 747 | sci_br_interrupt(irq, ptr, regs); |
783 | 748 | ||
784 | return IRQ_HANDLED; | 749 | return IRQ_HANDLED; |
@@ -789,7 +754,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) | |||
789 | * Here we define a transistion notifier so that we can update all of our | 754 | * Here we define a transistion notifier so that we can update all of our |
790 | * ports' baud rate when the peripheral clock changes. | 755 | * ports' baud rate when the peripheral clock changes. |
791 | */ | 756 | */ |
792 | static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) | 757 | static int sci_notifier(struct notifier_block *self, |
758 | unsigned long phase, void *p) | ||
793 | { | 759 | { |
794 | struct cpufreq_freqs *freqs = p; | 760 | struct cpufreq_freqs *freqs = p; |
795 | int i; | 761 | int i; |
@@ -816,8 +782,9 @@ static int sci_notifier(struct notifier_block *self, unsigned long phase, void * | |||
816 | clk_put(clk); | 782 | clk_put(clk); |
817 | } | 783 | } |
818 | 784 | ||
819 | printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n", | 785 | printk(KERN_INFO "%s: got a postchange notification " |
820 | __FUNCTION__, freqs->cpu, freqs->old, freqs->new); | 786 | "for cpu %d (old %d, new %d)\n", |
787 | __FUNCTION__, freqs->cpu, freqs->old, freqs->new); | ||
821 | } | 788 | } |
822 | 789 | ||
823 | return NOTIFY_OK; | 790 | return NOTIFY_OK; |
@@ -841,8 +808,9 @@ static int sci_request_irq(struct sci_port *port) | |||
841 | printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); | 808 | printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); |
842 | return -ENODEV; | 809 | return -ENODEV; |
843 | } | 810 | } |
844 | if (request_irq(port->irqs[0], sci_mpxed_interrupt, IRQF_DISABLED, | 811 | |
845 | "sci", port)) { | 812 | if (request_irq(port->irqs[0], sci_mpxed_interrupt, |
813 | SA_INTERRUPT, "sci", port)) { | ||
846 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); | 814 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); |
847 | return -ENODEV; | 815 | return -ENODEV; |
848 | } | 816 | } |
@@ -850,8 +818,8 @@ static int sci_request_irq(struct sci_port *port) | |||
850 | for (i = 0; i < ARRAY_SIZE(handlers); i++) { | 818 | for (i = 0; i < ARRAY_SIZE(handlers); i++) { |
851 | if (!port->irqs[i]) | 819 | if (!port->irqs[i]) |
852 | continue; | 820 | continue; |
853 | if (request_irq(port->irqs[i], handlers[i], IRQF_DISABLED, | 821 | if (request_irq(port->irqs[i], handlers[i], |
854 | desc[i], port)) { | 822 | SA_INTERRUPT, desc[i], port)) { |
855 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); | 823 | printk(KERN_ERR "sci: Cannot allocate irq.\n"); |
856 | return -ENODEV; | 824 | return -ENODEV; |
857 | } | 825 | } |
@@ -903,50 +871,42 @@ static unsigned int sci_get_mctrl(struct uart_port *port) | |||
903 | 871 | ||
904 | static void sci_start_tx(struct uart_port *port) | 872 | static void sci_start_tx(struct uart_port *port) |
905 | { | 873 | { |
906 | struct sci_port *s = &sci_ports[port->line]; | 874 | unsigned short ctrl; |
907 | 875 | ||
908 | disable_irq(s->irqs[SCIx_TXI_IRQ]); | 876 | /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ |
909 | sci_transmit_chars(port); | 877 | ctrl = sci_in(port, SCSCR); |
910 | enable_irq(s->irqs[SCIx_TXI_IRQ]); | 878 | ctrl |= SCI_CTRL_FLAGS_TIE; |
879 | sci_out(port, SCSCR, ctrl); | ||
911 | } | 880 | } |
912 | 881 | ||
913 | static void sci_stop_tx(struct uart_port *port) | 882 | static void sci_stop_tx(struct uart_port *port) |
914 | { | 883 | { |
915 | unsigned long flags; | ||
916 | unsigned short ctrl; | 884 | unsigned short ctrl; |
917 | 885 | ||
918 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ | 886 | /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ |
919 | local_irq_save(flags); | ||
920 | ctrl = sci_in(port, SCSCR); | 887 | ctrl = sci_in(port, SCSCR); |
921 | ctrl &= ~SCI_CTRL_FLAGS_TIE; | 888 | ctrl &= ~SCI_CTRL_FLAGS_TIE; |
922 | sci_out(port, SCSCR, ctrl); | 889 | sci_out(port, SCSCR, ctrl); |
923 | local_irq_restore(flags); | ||
924 | } | 890 | } |
925 | 891 | ||
926 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start) | 892 | static void sci_start_rx(struct uart_port *port, unsigned int tty_start) |
927 | { | 893 | { |
928 | unsigned long flags; | ||
929 | unsigned short ctrl; | 894 | unsigned short ctrl; |
930 | 895 | ||
931 | /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ | 896 | /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ |
932 | local_irq_save(flags); | ||
933 | ctrl = sci_in(port, SCSCR); | 897 | ctrl = sci_in(port, SCSCR); |
934 | ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; | 898 | ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; |
935 | sci_out(port, SCSCR, ctrl); | 899 | sci_out(port, SCSCR, ctrl); |
936 | local_irq_restore(flags); | ||
937 | } | 900 | } |
938 | 901 | ||
939 | static void sci_stop_rx(struct uart_port *port) | 902 | static void sci_stop_rx(struct uart_port *port) |
940 | { | 903 | { |
941 | unsigned long flags; | ||
942 | unsigned short ctrl; | 904 | unsigned short ctrl; |
943 | 905 | ||
944 | /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ | 906 | /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ |
945 | local_irq_save(flags); | ||
946 | ctrl = sci_in(port, SCSCR); | 907 | ctrl = sci_in(port, SCSCR); |
947 | ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); | 908 | ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); |
948 | sci_out(port, SCSCR, ctrl); | 909 | sci_out(port, SCSCR, ctrl); |
949 | local_irq_restore(flags); | ||
950 | } | 910 | } |
951 | 911 | ||
952 | static void sci_enable_ms(struct uart_port *port) | 912 | static void sci_enable_ms(struct uart_port *port) |
@@ -963,9 +923,8 @@ static int sci_startup(struct uart_port *port) | |||
963 | { | 923 | { |
964 | struct sci_port *s = &sci_ports[port->line]; | 924 | struct sci_port *s = &sci_ports[port->line]; |
965 | 925 | ||
966 | #if defined(__H8300S__) | 926 | if (s->enable) |
967 | h8300_sci_enable(port, sci_enable); | 927 | s->enable(port); |
968 | #endif | ||
969 | 928 | ||
970 | sci_request_irq(s); | 929 | sci_request_irq(s); |
971 | sci_start_tx(port); | 930 | sci_start_tx(port); |
@@ -982,9 +941,8 @@ static void sci_shutdown(struct uart_port *port) | |||
982 | sci_stop_tx(port); | 941 | sci_stop_tx(port); |
983 | sci_free_irq(s); | 942 | sci_free_irq(s); |
984 | 943 | ||
985 | #if defined(__H8300S__) | 944 | if (s->disable) |
986 | h8300_sci_enable(port, sci_disable); | 945 | s->disable(port); |
987 | #endif | ||
988 | } | 946 | } |
989 | 947 | ||
990 | static void sci_set_termios(struct uart_port *port, struct termios *termios, | 948 | static void sci_set_termios(struct uart_port *port, struct termios *termios, |
@@ -997,6 +955,23 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
997 | 955 | ||
998 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); | 956 | baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); |
999 | 957 | ||
958 | switch (baud) { | ||
959 | case 0: | ||
960 | t = -1; | ||
961 | break; | ||
962 | default: | ||
963 | { | ||
964 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | ||
965 | struct clk *clk = clk_get("module_clk"); | ||
966 | t = SCBRR_VALUE(baud, clk_get_rate(clk)); | ||
967 | clk_put(clk); | ||
968 | #else | ||
969 | t = SCBRR_VALUE(baud); | ||
970 | #endif | ||
971 | } | ||
972 | break; | ||
973 | } | ||
974 | |||
1000 | spin_lock_irqsave(&port->lock, flags); | 975 | spin_lock_irqsave(&port->lock, flags); |
1001 | 976 | ||
1002 | do { | 977 | do { |
@@ -1006,9 +981,8 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
1006 | sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ | 981 | sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ |
1007 | 982 | ||
1008 | #if !defined(SCI_ONLY) | 983 | #if !defined(SCI_ONLY) |
1009 | if (port->type == PORT_SCIF) { | 984 | if (port->type == PORT_SCIF) |
1010 | sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); | 985 | sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); |
1011 | } | ||
1012 | #endif | 986 | #endif |
1013 | 987 | ||
1014 | smr_val = sci_in(port, SCSMR) & 3; | 988 | smr_val = sci_in(port, SCSMR) & 3; |
@@ -1025,23 +999,6 @@ static void sci_set_termios(struct uart_port *port, struct termios *termios, | |||
1025 | 999 | ||
1026 | sci_out(port, SCSMR, smr_val); | 1000 | sci_out(port, SCSMR, smr_val); |
1027 | 1001 | ||
1028 | switch (baud) { | ||
1029 | case 0: | ||
1030 | t = -1; | ||
1031 | break; | ||
1032 | default: | ||
1033 | { | ||
1034 | #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) | ||
1035 | struct clk *clk = clk_get("module_clk"); | ||
1036 | t = SCBRR_VALUE(baud, clk_get_rate(clk)); | ||
1037 | clk_put(clk); | ||
1038 | #else | ||
1039 | t = SCBRR_VALUE(baud); | ||
1040 | #endif | ||
1041 | } | ||
1042 | break; | ||
1043 | } | ||
1044 | |||
1045 | if (t > 0) { | 1002 | if (t > 0) { |
1046 | if(t >= 256) { | 1003 | if(t >= 256) { |
1047 | sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); | 1004 | sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); |
@@ -1092,11 +1049,23 @@ static void sci_config_port(struct uart_port *port, int flags) | |||
1092 | 1049 | ||
1093 | port->type = s->type; | 1050 | port->type = s->type; |
1094 | 1051 | ||
1052 | switch (port->type) { | ||
1053 | case PORT_SCI: | ||
1054 | s->init_pins = sci_init_pins_sci; | ||
1055 | break; | ||
1056 | case PORT_SCIF: | ||
1057 | s->init_pins = sci_init_pins_scif; | ||
1058 | break; | ||
1059 | case PORT_IRDA: | ||
1060 | s->init_pins = sci_init_pins_irda; | ||
1061 | break; | ||
1062 | } | ||
1063 | |||
1095 | #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) | 1064 | #if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) |
1096 | if (port->mapbase == 0) | 1065 | if (port->mapbase == 0) |
1097 | port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); | 1066 | port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); |
1098 | 1067 | ||
1099 | port->membase = (void *)port->mapbase; | 1068 | port->membase = (void __iomem *)port->mapbase; |
1100 | #endif | 1069 | #endif |
1101 | } | 1070 | } |
1102 | 1071 | ||
@@ -1132,412 +1101,61 @@ static struct uart_ops sci_uart_ops = { | |||
1132 | .verify_port = sci_verify_port, | 1101 | .verify_port = sci_verify_port, |
1133 | }; | 1102 | }; |
1134 | 1103 | ||
1135 | static struct sci_port sci_ports[] = { | 1104 | static void __init sci_init_ports(void) |
1136 | #if defined(CONFIG_CPU_SUBTYPE_SH7708) | 1105 | { |
1137 | { | 1106 | static int first = 1; |
1138 | .port = { | 1107 | int i; |
1139 | .membase = (void *)0xfffffe80, | 1108 | |
1140 | .mapbase = 0xfffffe80, | 1109 | if (!first) |
1141 | .iotype = UPIO_MEM, | 1110 | return; |
1142 | .irq = 25, | 1111 | |
1143 | .ops = &sci_uart_ops, | 1112 | first = 0; |
1144 | .flags = UPF_BOOT_AUTOCONF, | 1113 | |
1145 | .line = 0, | 1114 | for (i = 0; i < SCI_NPORTS; i++) { |
1146 | }, | 1115 | sci_ports[i].port.ops = &sci_uart_ops; |
1147 | .type = PORT_SCI, | 1116 | sci_ports[i].port.iotype = UPIO_MEM; |
1148 | .irqs = SCI_IRQS, | 1117 | sci_ports[i].port.line = i; |
1149 | }, | 1118 | sci_ports[i].port.fifosize = 1; |
1150 | #elif defined(CONFIG_CPU_SUBTYPE_SH7705) | 1119 | |
1151 | { | 1120 | #if defined(__H8300H__) || defined(__H8300S__) |
1152 | .port = { | 1121 | #ifdef __H8300S__ |
1153 | .membase = (void *)SCIF0, | 1122 | sci_ports[i].enable = h8300_sci_enable; |
1154 | .mapbase = SCIF0, | 1123 | sci_ports[i].disable = h8300_sci_disable; |
1155 | .iotype = UPIO_MEM, | 1124 | #endif |
1156 | .irq = 55, | 1125 | sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK; |
1157 | .ops = &sci_uart_ops, | 1126 | #elif defined(CONFIG_SUPERH64) |
1158 | .flags = UPF_BOOT_AUTOCONF, | 1127 | sci_ports[i].port.uartclk = current_cpu_data.module_clock * 16; |
1159 | .line = 0, | ||
1160 | }, | ||
1161 | .type = PORT_SCIF, | ||
1162 | .irqs = SH3_IRDA_IRQS, | ||
1163 | .init_pins = sci_init_pins_scif, | ||
1164 | }, | ||
1165 | { | ||
1166 | .port = { | ||
1167 | .membase = (void *)SCIF2, | ||
1168 | .mapbase = SCIF2, | ||
1169 | .iotype = UPIO_MEM, | ||
1170 | .irq = 59, | ||
1171 | .ops = &sci_uart_ops, | ||
1172 | .flags = UPF_BOOT_AUTOCONF, | ||
1173 | .line = 1, | ||
1174 | }, | ||
1175 | .type = PORT_SCIF, | ||
1176 | .irqs = SH3_SCIF_IRQS, | ||
1177 | .init_pins = sci_init_pins_scif, | ||
1178 | } | ||
1179 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | ||
1180 | { | ||
1181 | .port = { | ||
1182 | .membase = (void *)0xfffffe80, | ||
1183 | .mapbase = 0xfffffe80, | ||
1184 | .iotype = UPIO_MEM, | ||
1185 | .irq = 25, | ||
1186 | .ops = &sci_uart_ops, | ||
1187 | .flags = UPF_BOOT_AUTOCONF, | ||
1188 | .line = 0, | ||
1189 | }, | ||
1190 | .type = PORT_SCI, | ||
1191 | .irqs = SCI_IRQS, | ||
1192 | }, | ||
1193 | { | ||
1194 | .port = { | ||
1195 | .membase = (void *)0xa4000150, | ||
1196 | .mapbase = 0xa4000150, | ||
1197 | .iotype = UPIO_MEM, | ||
1198 | .irq = 59, | ||
1199 | .ops = &sci_uart_ops, | ||
1200 | .flags = UPF_BOOT_AUTOCONF, | ||
1201 | .line = 1, | ||
1202 | }, | ||
1203 | .type = PORT_SCIF, | ||
1204 | .irqs = SH3_SCIF_IRQS, | ||
1205 | .init_pins = sci_init_pins_scif, | ||
1206 | }, | ||
1207 | { | ||
1208 | .port = { | ||
1209 | .membase = (void *)0xa4000140, | ||
1210 | .mapbase = 0xa4000140, | ||
1211 | .iotype = UPIO_MEM, | ||
1212 | .irq = 55, | ||
1213 | .ops = &sci_uart_ops, | ||
1214 | .flags = UPF_BOOT_AUTOCONF, | ||
1215 | .line = 2, | ||
1216 | }, | ||
1217 | .type = PORT_IRDA, | ||
1218 | .irqs = SH3_IRDA_IRQS, | ||
1219 | .init_pins = sci_init_pins_irda, | ||
1220 | } | ||
1221 | #elif defined(CONFIG_CPU_SUBTYPE_SH7300) | ||
1222 | { | ||
1223 | .port = { | ||
1224 | .membase = (void *)0xA4430000, | ||
1225 | .mapbase = 0xA4430000, | ||
1226 | .iotype = UPIO_MEM, | ||
1227 | .irq = 25, | ||
1228 | .ops = &sci_uart_ops, | ||
1229 | .flags = UPF_BOOT_AUTOCONF, | ||
1230 | .line = 0, | ||
1231 | }, | ||
1232 | .type = PORT_SCIF, | ||
1233 | .irqs = SH7300_SCIF0_IRQS, | ||
1234 | .init_pins = sci_init_pins_scif, | ||
1235 | }, | ||
1236 | #elif defined(CONFIG_CPU_SUBTYPE_SH73180) | ||
1237 | { | ||
1238 | .port = { | ||
1239 | .membase = (void *)0xffe00000, | ||
1240 | .mapbase = 0xffe00000, | ||
1241 | .iotype = UPIO_MEM, | ||
1242 | .irq = 25, | ||
1243 | .ops = &sci_uart_ops, | ||
1244 | .flags = UPF_BOOT_AUTOCONF, | ||
1245 | .line = 0, | ||
1246 | }, | ||
1247 | .type = PORT_SCIF, | ||
1248 | .irqs = SH73180_SCIF_IRQS, | ||
1249 | .init_pins = sci_init_pins_scif, | ||
1250 | }, | ||
1251 | #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) | ||
1252 | { | ||
1253 | .port = { | ||
1254 | .membase = (void *)0xffe80000, | ||
1255 | .mapbase = 0xffe80000, | ||
1256 | .iotype = UPIO_MEM, | ||
1257 | .irq = 43, | ||
1258 | .ops = &sci_uart_ops, | ||
1259 | .flags = UPF_BOOT_AUTOCONF, | ||
1260 | .line = 0, | ||
1261 | }, | ||
1262 | .type = PORT_SCIF, | ||
1263 | .irqs = SH4_SCIF_IRQS, | ||
1264 | .init_pins = sci_init_pins_scif, | ||
1265 | }, | ||
1266 | #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) | ||
1267 | { | ||
1268 | .port = { | ||
1269 | .membase = (void *)0xffe00000, | ||
1270 | .mapbase = 0xffe00000, | ||
1271 | .iotype = UPIO_MEM, | ||
1272 | .irq = 25, | ||
1273 | .ops = &sci_uart_ops, | ||
1274 | .flags = UPF_BOOT_AUTOCONF, | ||
1275 | .line = 0, | ||
1276 | }, | ||
1277 | .type = PORT_SCI, | ||
1278 | .irqs = SCI_IRQS, | ||
1279 | }, | ||
1280 | { | ||
1281 | .port = { | ||
1282 | .membase = (void *)0xffe80000, | ||
1283 | .mapbase = 0xffe80000, | ||
1284 | .iotype = UPIO_MEM, | ||
1285 | .irq = 43, | ||
1286 | .ops = &sci_uart_ops, | ||
1287 | .flags = UPF_BOOT_AUTOCONF, | ||
1288 | .line = 1, | ||
1289 | }, | ||
1290 | .type = PORT_SCIF, | ||
1291 | .irqs = SH4_SCIF_IRQS, | ||
1292 | .init_pins = sci_init_pins_scif, | ||
1293 | }, | ||
1294 | #elif defined(CONFIG_CPU_SUBTYPE_SH7760) | ||
1295 | { | ||
1296 | .port = { | ||
1297 | .membase = (void *)0xfe600000, | ||
1298 | .mapbase = 0xfe600000, | ||
1299 | .iotype = UPIO_MEM, | ||
1300 | .irq = 55, | ||
1301 | .ops = &sci_uart_ops, | ||
1302 | .flags = UPF_BOOT_AUTOCONF, | ||
1303 | .line = 0, | ||
1304 | }, | ||
1305 | .type = PORT_SCIF, | ||
1306 | .irqs = SH7760_SCIF0_IRQS, | ||
1307 | .init_pins = sci_init_pins_scif, | ||
1308 | }, | ||
1309 | { | ||
1310 | .port = { | ||
1311 | .membase = (void *)0xfe610000, | ||
1312 | .mapbase = 0xfe610000, | ||
1313 | .iotype = UPIO_MEM, | ||
1314 | .irq = 75, | ||
1315 | .ops = &sci_uart_ops, | ||
1316 | .flags = UPF_BOOT_AUTOCONF, | ||
1317 | .line = 1, | ||
1318 | }, | ||
1319 | .type = PORT_SCIF, | ||
1320 | .irqs = SH7760_SCIF1_IRQS, | ||
1321 | .init_pins = sci_init_pins_scif, | ||
1322 | }, | ||
1323 | { | ||
1324 | .port = { | ||
1325 | .membase = (void *)0xfe620000, | ||
1326 | .mapbase = 0xfe620000, | ||
1327 | .iotype = UPIO_MEM, | ||
1328 | .irq = 79, | ||
1329 | .ops = &sci_uart_ops, | ||
1330 | .flags = UPF_BOOT_AUTOCONF, | ||
1331 | .line = 2, | ||
1332 | }, | ||
1333 | .type = PORT_SCIF, | ||
1334 | .irqs = SH7760_SCIF2_IRQS, | ||
1335 | .init_pins = sci_init_pins_scif, | ||
1336 | }, | ||
1337 | #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) | ||
1338 | { | ||
1339 | .port = { | ||
1340 | .membase = (void *)0xffe00000, | ||
1341 | .mapbase = 0xffe00000, | ||
1342 | .iotype = UPIO_MEM, | ||
1343 | .irq = 26, | ||
1344 | .ops = &sci_uart_ops, | ||
1345 | .flags = UPF_BOOT_AUTOCONF, | ||
1346 | .line = 0, | ||
1347 | }, | ||
1348 | .type = PORT_SCIF, | ||
1349 | .irqs = STB1_SCIF1_IRQS, | ||
1350 | .init_pins = sci_init_pins_scif, | ||
1351 | }, | ||
1352 | { | ||
1353 | .port = { | ||
1354 | .membase = (void *)0xffe80000, | ||
1355 | .mapbase = 0xffe80000, | ||
1356 | .iotype = UPIO_MEM, | ||
1357 | .irq = 43, | ||
1358 | .ops = &sci_uart_ops, | ||
1359 | .flags = UPF_BOOT_AUTOCONF, | ||
1360 | .line = 1, | ||
1361 | }, | ||
1362 | .type = PORT_SCIF, | ||
1363 | .irqs = SH4_SCIF_IRQS, | ||
1364 | .init_pins = sci_init_pins_scif, | ||
1365 | }, | ||
1366 | #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) | ||
1367 | { | ||
1368 | .port = { | ||
1369 | .iotype = UPIO_MEM, | ||
1370 | .irq = 42, | ||
1371 | .ops = &sci_uart_ops, | ||
1372 | .flags = UPF_BOOT_AUTOCONF, | ||
1373 | .line = 0, | ||
1374 | }, | ||
1375 | .type = PORT_SCIF, | ||
1376 | .irqs = SH5_SCIF_IRQS, | ||
1377 | .init_pins = sci_init_pins_scif, | ||
1378 | }, | ||
1379 | #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) | ||
1380 | { | ||
1381 | .port = { | ||
1382 | .membase = (void *)0x00ffffb0, | ||
1383 | .mapbase = 0x00ffffb0, | ||
1384 | .iotype = UPIO_MEM, | ||
1385 | .irq = 54, | ||
1386 | .ops = &sci_uart_ops, | ||
1387 | .flags = UPF_BOOT_AUTOCONF, | ||
1388 | .line = 0, | ||
1389 | }, | ||
1390 | .type = PORT_SCI, | ||
1391 | .irqs = H8300H_SCI_IRQS0, | ||
1392 | .init_pins = sci_init_pins_sci, | ||
1393 | }, | ||
1394 | { | ||
1395 | .port = { | ||
1396 | .membase = (void *)0x00ffffb8, | ||
1397 | .mapbase = 0x00ffffb8, | ||
1398 | .iotype = UPIO_MEM, | ||
1399 | .irq = 58, | ||
1400 | .ops = &sci_uart_ops, | ||
1401 | .flags = UPF_BOOT_AUTOCONF, | ||
1402 | .line = 1, | ||
1403 | }, | ||
1404 | .type = PORT_SCI, | ||
1405 | .irqs = H8300H_SCI_IRQS1, | ||
1406 | .init_pins = sci_init_pins_sci, | ||
1407 | }, | ||
1408 | { | ||
1409 | .port = { | ||
1410 | .membase = (void *)0x00ffffc0, | ||
1411 | .mapbase = 0x00ffffc0, | ||
1412 | .iotype = UPIO_MEM, | ||
1413 | .irq = 62, | ||
1414 | .ops = &sci_uart_ops, | ||
1415 | .flags = UPF_BOOT_AUTOCONF, | ||
1416 | .line = 2, | ||
1417 | }, | ||
1418 | .type = PORT_SCI, | ||
1419 | .irqs = H8300H_SCI_IRQS2, | ||
1420 | .init_pins = sci_init_pins_sci, | ||
1421 | }, | ||
1422 | #elif defined(CONFIG_H8S2678) | ||
1423 | { | ||
1424 | .port = { | ||
1425 | .membase = (void *)0x00ffff78, | ||
1426 | .mapbase = 0x00ffff78, | ||
1427 | .iotype = UPIO_MEM, | ||
1428 | .irq = 90, | ||
1429 | .ops = &sci_uart_ops, | ||
1430 | .flags = UPF_BOOT_AUTOCONF, | ||
1431 | .line = 0, | ||
1432 | }, | ||
1433 | .type = PORT_SCI, | ||
1434 | .irqs = H8S_SCI_IRQS0, | ||
1435 | .init_pins = sci_init_pins_sci, | ||
1436 | }, | ||
1437 | { | ||
1438 | .port = { | ||
1439 | .membase = (void *)0x00ffff80, | ||
1440 | .mapbase = 0x00ffff80, | ||
1441 | .iotype = UPIO_MEM, | ||
1442 | .irq = 94, | ||
1443 | .ops = &sci_uart_ops, | ||
1444 | .flags = UPF_BOOT_AUTOCONF, | ||
1445 | .line = 1, | ||
1446 | }, | ||
1447 | .type = PORT_SCI, | ||
1448 | .irqs = H8S_SCI_IRQS1, | ||
1449 | .init_pins = sci_init_pins_sci, | ||
1450 | }, | ||
1451 | { | ||
1452 | .port = { | ||
1453 | .membase = (void *)0x00ffff88, | ||
1454 | .mapbase = 0x00ffff88, | ||
1455 | .iotype = UPIO_MEM, | ||
1456 | .irq = 98, | ||
1457 | .ops = &sci_uart_ops, | ||
1458 | .flags = UPF_BOOT_AUTOCONF, | ||
1459 | .line = 2, | ||
1460 | }, | ||
1461 | .type = PORT_SCI, | ||
1462 | .irqs = H8S_SCI_IRQS2, | ||
1463 | .init_pins = sci_init_pins_sci, | ||
1464 | }, | ||
1465 | #elif defined(CONFIG_CPU_SUBTYPE_SH7770) | ||
1466 | { | ||
1467 | .port = { | ||
1468 | .membase = (void *)0xff923000, | ||
1469 | .mapbase = 0xff923000, | ||
1470 | .iotype = UPIO_MEM, | ||
1471 | .irq = 61, | ||
1472 | .ops = &sci_uart_ops, | ||
1473 | .flags = UPF_BOOT_AUTOCONF, | ||
1474 | .line = 0, | ||
1475 | }, | ||
1476 | .type = PORT_SCIF, | ||
1477 | .irqs = SH7770_SCIF0_IRQS, | ||
1478 | .init_pins = sci_init_pins_scif, | ||
1479 | }, | ||
1480 | { | ||
1481 | .port = { | ||
1482 | .membase = (void *)0xff924000, | ||
1483 | .mapbase = 0xff924000, | ||
1484 | .iotype = UPIO_MEM, | ||
1485 | .irq = 62, | ||
1486 | .ops = &sci_uart_ops, | ||
1487 | .flags = UPF_BOOT_AUTOCONF, | ||
1488 | .line = 1, | ||
1489 | }, | ||
1490 | .type = PORT_SCIF, | ||
1491 | .irqs = SH7770_SCIF1_IRQS, | ||
1492 | .init_pins = sci_init_pins_scif, | ||
1493 | }, | ||
1494 | { | ||
1495 | .port = { | ||
1496 | .membase = (void *)0xff925000, | ||
1497 | .mapbase = 0xff925000, | ||
1498 | .iotype = UPIO_MEM, | ||
1499 | .irq = 63, | ||
1500 | .ops = &sci_uart_ops, | ||
1501 | .flags = UPF_BOOT_AUTOCONF, | ||
1502 | .line = 2, | ||
1503 | }, | ||
1504 | .type = PORT_SCIF, | ||
1505 | .irqs = SH7770_SCIF2_IRQS, | ||
1506 | .init_pins = sci_init_pins_scif, | ||
1507 | }, | ||
1508 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) | ||
1509 | { | ||
1510 | .port = { | ||
1511 | .membase = (void *)0xffe00000, | ||
1512 | .mapbase = 0xffe00000, | ||
1513 | .iotype = UPIO_MEM, | ||
1514 | .irq = 43, | ||
1515 | .ops = &sci_uart_ops, | ||
1516 | .flags = UPF_BOOT_AUTOCONF, | ||
1517 | .line = 0, | ||
1518 | }, | ||
1519 | .type = PORT_SCIF, | ||
1520 | .irqs = SH7780_SCIF0_IRQS, | ||
1521 | .init_pins = sci_init_pins_scif, | ||
1522 | }, | ||
1523 | { | ||
1524 | .port = { | ||
1525 | .membase = (void *)0xffe10000, | ||
1526 | .mapbase = 0xffe10000, | ||
1527 | .iotype = UPIO_MEM, | ||
1528 | .irq = 79, | ||
1529 | .ops = &sci_uart_ops, | ||
1530 | .flags = UPF_BOOT_AUTOCONF, | ||
1531 | .line = 1, | ||
1532 | }, | ||
1533 | .type = PORT_SCIF, | ||
1534 | .irqs = SH7780_SCIF1_IRQS, | ||
1535 | .init_pins = sci_init_pins_scif, | ||
1536 | }, | ||
1537 | #else | 1128 | #else |
1538 | #error "CPU subtype not defined" | 1129 | /* |
1130 | * XXX: We should use a proper SCI/SCIF clock | ||
1131 | */ | ||
1132 | { | ||
1133 | struct clk *clk = clk_get("module_clk"); | ||
1134 | sci_ports[i].port.uartclk = clk_get_rate(clk) * 16; | ||
1135 | clk_put(clk); | ||
1136 | } | ||
1539 | #endif | 1137 | #endif |
1540 | }; | 1138 | |
1139 | sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i]; | ||
1140 | sci_ports[i].break_timer.function = sci_break_timer; | ||
1141 | |||
1142 | init_timer(&sci_ports[i].break_timer); | ||
1143 | } | ||
1144 | } | ||
1145 | |||
1146 | int __init early_sci_setup(struct uart_port *port) | ||
1147 | { | ||
1148 | if (unlikely(port->line > SCI_NPORTS)) | ||
1149 | return -ENODEV; | ||
1150 | |||
1151 | sci_init_ports(); | ||
1152 | |||
1153 | sci_ports[port->line].port.membase = port->membase; | ||
1154 | sci_ports[port->line].port.mapbase = port->mapbase; | ||
1155 | sci_ports[port->line].port.type = port->type; | ||
1156 | |||
1157 | return 0; | ||
1158 | } | ||
1541 | 1159 | ||
1542 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE | 1160 | #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE |
1543 | /* | 1161 | /* |
@@ -1559,34 +1177,38 @@ static int __init serial_console_setup(struct console *co, char *options) | |||
1559 | int flow = 'n'; | 1177 | int flow = 'n'; |
1560 | int ret; | 1178 | int ret; |
1561 | 1179 | ||
1180 | /* | ||
1181 | * Check whether an invalid uart number has been specified, and | ||
1182 | * if so, search for the first available port that does have | ||
1183 | * console support. | ||
1184 | */ | ||
1185 | if (co->index >= SCI_NPORTS) | ||
1186 | co->index = 0; | ||
1187 | |||
1562 | serial_console_port = &sci_ports[co->index]; | 1188 | serial_console_port = &sci_ports[co->index]; |
1563 | port = &serial_console_port->port; | 1189 | port = &serial_console_port->port; |
1564 | port->type = serial_console_port->type; | ||
1565 | |||
1566 | #ifdef CONFIG_SUPERH64 | ||
1567 | /* This is especially needed on sh64 to remap the SCIF */ | ||
1568 | sci_config_port(port, 0); | ||
1569 | #endif | ||
1570 | 1190 | ||
1571 | /* | 1191 | /* |
1572 | * We need to set the initial uartclk here, since otherwise it will | 1192 | * Also need to check port->type, we don't actually have any |
1573 | * only ever be setup at sci_init() time. | 1193 | * UPIO_PORT ports, but uart_report_port() handily misreports |
1194 | * it anyways if we don't have a port available by the time this is | ||
1195 | * called. | ||
1574 | */ | 1196 | */ |
1575 | #if defined(__H8300H__) || defined(__H8300S__) | 1197 | if (!port->type) |
1576 | port->uartclk = CONFIG_CPU_CLOCK; | 1198 | return -ENODEV; |
1199 | if (!port->membase || !port->mapbase) | ||
1200 | return -ENODEV; | ||
1201 | |||
1202 | spin_lock_init(&port->lock); | ||
1203 | |||
1204 | port->type = serial_console_port->type; | ||
1205 | |||
1206 | if (port->flags & UPF_IOREMAP) | ||
1207 | sci_config_port(port, 0); | ||
1208 | |||
1209 | if (serial_console_port->enable) | ||
1210 | serial_console_port->enable(port); | ||
1577 | 1211 | ||
1578 | #if defined(__H8300S__) | ||
1579 | h8300_sci_enable(port, sci_enable); | ||
1580 | #endif | ||
1581 | #elif defined(CONFIG_SUPERH64) | ||
1582 | port->uartclk = current_cpu_data.module_clock * 16; | ||
1583 | #else | ||
1584 | { | ||
1585 | struct clk *clk = clk_get("module_clk"); | ||
1586 | port->uartclk = clk_get_rate(clk) * 16; | ||
1587 | clk_put(clk); | ||
1588 | } | ||
1589 | #endif | ||
1590 | if (options) | 1212 | if (options) |
1591 | uart_parse_options(options, &baud, &parity, &bits, &flow); | 1213 | uart_parse_options(options, &baud, &parity, &bits, &flow); |
1592 | 1214 | ||
@@ -1604,17 +1226,17 @@ static struct console serial_console = { | |||
1604 | .device = uart_console_device, | 1226 | .device = uart_console_device, |
1605 | .write = serial_console_write, | 1227 | .write = serial_console_write, |
1606 | .setup = serial_console_setup, | 1228 | .setup = serial_console_setup, |
1607 | .flags = CON_PRINTBUFFER, | 1229 | .flags = CON_PRINTBUFFER, |
1608 | .index = -1, | 1230 | .index = -1, |
1609 | .data = &sci_uart_driver, | 1231 | .data = &sci_uart_driver, |
1610 | }; | 1232 | }; |
1611 | 1233 | ||
1612 | static int __init sci_console_init(void) | 1234 | static int __init sci_console_init(void) |
1613 | { | 1235 | { |
1236 | sci_init_ports(); | ||
1614 | register_console(&serial_console); | 1237 | register_console(&serial_console); |
1615 | return 0; | 1238 | return 0; |
1616 | } | 1239 | } |
1617 | |||
1618 | console_initcall(sci_console_init); | 1240 | console_initcall(sci_console_init); |
1619 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ | 1241 | #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ |
1620 | 1242 | ||
@@ -1649,6 +1271,8 @@ int __init kgdb_console_setup(struct console *co, char *options) | |||
1649 | int parity = 'n'; | 1271 | int parity = 'n'; |
1650 | int flow = 'n'; | 1272 | int flow = 'n'; |
1651 | 1273 | ||
1274 | spin_lock_init(&port->lock); | ||
1275 | |||
1652 | if (co->index != kgdb_portnum) | 1276 | if (co->index != kgdb_portnum) |
1653 | co->index = kgdb_portnum; | 1277 | co->index = kgdb_portnum; |
1654 | 1278 | ||
@@ -1677,10 +1301,10 @@ static struct console kgdb_console = { | |||
1677 | /* Register the KGDB console so we get messages (d'oh!) */ | 1301 | /* Register the KGDB console so we get messages (d'oh!) */ |
1678 | static int __init kgdb_console_init(void) | 1302 | static int __init kgdb_console_init(void) |
1679 | { | 1303 | { |
1304 | sci_init_ports(); | ||
1680 | register_console(&kgdb_console); | 1305 | register_console(&kgdb_console); |
1681 | return 0; | 1306 | return 0; |
1682 | } | 1307 | } |
1683 | |||
1684 | console_initcall(kgdb_console_init); | 1308 | console_initcall(kgdb_console_init); |
1685 | #endif /* CONFIG_SH_KGDB_CONSOLE */ | 1309 | #endif /* CONFIG_SH_KGDB_CONSOLE */ |
1686 | 1310 | ||
@@ -1701,60 +1325,132 @@ static struct uart_driver sci_uart_driver = { | |||
1701 | .dev_name = "ttySC", | 1325 | .dev_name = "ttySC", |
1702 | .major = SCI_MAJOR, | 1326 | .major = SCI_MAJOR, |
1703 | .minor = SCI_MINOR_START, | 1327 | .minor = SCI_MINOR_START, |
1328 | .nr = SCI_NPORTS, | ||
1704 | .cons = SCI_CONSOLE, | 1329 | .cons = SCI_CONSOLE, |
1705 | }; | 1330 | }; |
1706 | 1331 | ||
1707 | static int __init sci_init(void) | 1332 | /* |
1333 | * Register a set of serial devices attached to a platform device. The | ||
1334 | * list is terminated with a zero flags entry, which means we expect | ||
1335 | * all entries to have at least UPF_BOOT_AUTOCONF set. Platforms that need | ||
1336 | * remapping (such as sh64) should also set UPF_IOREMAP. | ||
1337 | */ | ||
1338 | static int __devinit sci_probe(struct platform_device *dev) | ||
1708 | { | 1339 | { |
1709 | int chan, ret; | 1340 | struct plat_sci_port *p = dev->dev.platform_data; |
1341 | int i; | ||
1710 | 1342 | ||
1711 | printk("%s", banner); | 1343 | for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) { |
1344 | struct sci_port *sciport = &sci_ports[i]; | ||
1712 | 1345 | ||
1713 | sci_uart_driver.nr = ARRAY_SIZE(sci_ports); | 1346 | sciport->port.mapbase = p->mapbase; |
1714 | 1347 | ||
1715 | ret = uart_register_driver(&sci_uart_driver); | 1348 | /* |
1716 | if (ret == 0) { | 1349 | * For the simple (and majority of) cases where we don't need |
1717 | for (chan = 0; chan < SCI_NPORTS; chan++) { | 1350 | * to do any remapping, just cast the cookie directly. |
1718 | struct sci_port *sciport = &sci_ports[chan]; | 1351 | */ |
1352 | if (p->mapbase && !p->membase && !(p->flags & UPF_IOREMAP)) | ||
1353 | p->membase = (void __iomem *)p->mapbase; | ||
1719 | 1354 | ||
1720 | #if defined(__H8300H__) || defined(__H8300S__) | 1355 | sciport->port.membase = p->membase; |
1721 | sciport->port.uartclk = CONFIG_CPU_CLOCK; | 1356 | |
1722 | #elif defined(CONFIG_SUPERH64) | 1357 | sciport->port.irq = p->irqs[SCIx_TXI_IRQ]; |
1723 | sciport->port.uartclk = current_cpu_data.module_clock * 16; | 1358 | sciport->port.flags = p->flags; |
1724 | #else | 1359 | sciport->port.dev = &dev->dev; |
1725 | struct clk *clk = clk_get("module_clk"); | 1360 | |
1726 | sciport->port.uartclk = clk_get_rate(clk) * 16; | 1361 | sciport->type = sciport->port.type = p->type; |
1727 | clk_put(clk); | 1362 | |
1728 | #endif | 1363 | memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs)); |
1729 | uart_add_one_port(&sci_uart_driver, &sciport->port); | 1364 | |
1730 | sciport->break_timer.data = (unsigned long)sciport; | 1365 | uart_add_one_port(&sci_uart_driver, &sciport->port); |
1731 | sciport->break_timer.function = sci_break_timer; | ||
1732 | init_timer(&sciport->break_timer); | ||
1733 | } | ||
1734 | } | 1366 | } |
1735 | 1367 | ||
1736 | #ifdef CONFIG_CPU_FREQ | 1368 | #ifdef CONFIG_CPU_FREQ |
1737 | cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); | 1369 | cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); |
1738 | printk("sci: CPU frequency notifier registered\n"); | 1370 | dev_info(&dev->dev, "sci: CPU frequency notifier registered\n"); |
1739 | #endif | 1371 | #endif |
1740 | 1372 | ||
1741 | #ifdef CONFIG_SH_STANDARD_BIOS | 1373 | #ifdef CONFIG_SH_STANDARD_BIOS |
1742 | sh_bios_gdb_detach(); | 1374 | sh_bios_gdb_detach(); |
1743 | #endif | 1375 | #endif |
1744 | 1376 | ||
1745 | return ret; | 1377 | return 0; |
1746 | } | 1378 | } |
1747 | 1379 | ||
1748 | static void __exit sci_exit(void) | 1380 | static int __devexit sci_remove(struct platform_device *dev) |
1381 | { | ||
1382 | int i; | ||
1383 | |||
1384 | for (i = 0; i < SCI_NPORTS; i++) | ||
1385 | uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port); | ||
1386 | |||
1387 | return 0; | ||
1388 | } | ||
1389 | |||
1390 | static int sci_suspend(struct platform_device *dev, pm_message_t state) | ||
1749 | { | 1391 | { |
1750 | int chan; | 1392 | int i; |
1393 | |||
1394 | for (i = 0; i < SCI_NPORTS; i++) { | ||
1395 | struct sci_port *p = &sci_ports[i]; | ||
1396 | |||
1397 | if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) | ||
1398 | uart_suspend_port(&sci_uart_driver, &p->port); | ||
1399 | } | ||
1751 | 1400 | ||
1752 | for (chan = 0; chan < SCI_NPORTS; chan++) | 1401 | return 0; |
1753 | uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port); | 1402 | } |
1754 | 1403 | ||
1404 | static int sci_resume(struct platform_device *dev) | ||
1405 | { | ||
1406 | int i; | ||
1407 | |||
1408 | for (i = 0; i < SCI_NPORTS; i++) { | ||
1409 | struct sci_port *p = &sci_ports[i]; | ||
1410 | |||
1411 | if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev) | ||
1412 | uart_resume_port(&sci_uart_driver, &p->port); | ||
1413 | } | ||
1414 | |||
1415 | return 0; | ||
1416 | } | ||
1417 | |||
1418 | static struct platform_driver sci_driver = { | ||
1419 | .probe = sci_probe, | ||
1420 | .remove = __devexit_p(sci_remove), | ||
1421 | .suspend = sci_suspend, | ||
1422 | .resume = sci_resume, | ||
1423 | .driver = { | ||
1424 | .name = "sh-sci", | ||
1425 | .owner = THIS_MODULE, | ||
1426 | }, | ||
1427 | }; | ||
1428 | |||
1429 | static int __init sci_init(void) | ||
1430 | { | ||
1431 | int ret; | ||
1432 | |||
1433 | printk(banner); | ||
1434 | |||
1435 | sci_init_ports(); | ||
1436 | |||
1437 | ret = uart_register_driver(&sci_uart_driver); | ||
1438 | if (likely(ret == 0)) { | ||
1439 | ret = platform_driver_register(&sci_driver); | ||
1440 | if (unlikely(ret)) | ||
1441 | uart_unregister_driver(&sci_uart_driver); | ||
1442 | } | ||
1443 | |||
1444 | return ret; | ||
1445 | } | ||
1446 | |||
1447 | static void __exit sci_exit(void) | ||
1448 | { | ||
1449 | platform_driver_unregister(&sci_driver); | ||
1755 | uart_unregister_driver(&sci_uart_driver); | 1450 | uart_unregister_driver(&sci_uart_driver); |
1756 | } | 1451 | } |
1757 | 1452 | ||
1758 | module_init(sci_init); | 1453 | module_init(sci_init); |
1759 | module_exit(sci_exit); | 1454 | module_exit(sci_exit); |
1760 | 1455 | ||
1456 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index ab320fa3237c..28643c4dc850 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h | |||
@@ -10,7 +10,9 @@ | |||
10 | * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). | 10 | * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). |
11 | * Modified to support H8/300 Series Yoshinori Sato (Feb 2004). | 11 | * Modified to support H8/300 Series Yoshinori Sato (Feb 2004). |
12 | */ | 12 | */ |
13 | #include <linux/config.h> | ||
13 | #include <linux/serial_core.h> | 14 | #include <linux/serial_core.h> |
15 | #include <asm/io.h> | ||
14 | 16 | ||
15 | #if defined(__H8300H__) || defined(__H8300S__) | 17 | #if defined(__H8300H__) || defined(__H8300S__) |
16 | #include <asm/gpio.h> | 18 | #include <asm/gpio.h> |
@@ -22,40 +24,13 @@ | |||
22 | #endif | 24 | #endif |
23 | #endif | 25 | #endif |
24 | 26 | ||
25 | /* Offsets into the sci_port->irqs array */ | ||
26 | #define SCIx_ERI_IRQ 0 | ||
27 | #define SCIx_RXI_IRQ 1 | ||
28 | #define SCIx_TXI_IRQ 2 | ||
29 | |||
30 | /* ERI, RXI, TXI, BRI */ | ||
31 | #define SCI_IRQS { 23, 24, 25, 0 } | ||
32 | #define SH3_SCIF_IRQS { 56, 57, 59, 58 } | ||
33 | #define SH3_IRDA_IRQS { 52, 53, 55, 54 } | ||
34 | #define SH4_SCIF_IRQS { 40, 41, 43, 42 } | ||
35 | #define STB1_SCIF1_IRQS {23, 24, 26, 25 } | ||
36 | #define SH7760_SCIF0_IRQS { 52, 53, 55, 54 } | ||
37 | #define SH7760_SCIF1_IRQS { 72, 73, 75, 74 } | ||
38 | #define SH7760_SCIF2_IRQS { 76, 77, 79, 78 } | ||
39 | #define SH7300_SCIF0_IRQS {80, 80, 80, 80 } | ||
40 | #define SH73180_SCIF_IRQS {80, 81, 83, 82 } | ||
41 | #define H8300H_SCI_IRQS0 {52, 53, 54, 0 } | ||
42 | #define H8300H_SCI_IRQS1 {56, 57, 58, 0 } | ||
43 | #define H8300H_SCI_IRQS2 {60, 61, 62, 0 } | ||
44 | #define H8S_SCI_IRQS0 {88, 89, 90, 0 } | ||
45 | #define H8S_SCI_IRQS1 {92, 93, 94, 0 } | ||
46 | #define H8S_SCI_IRQS2 {96, 97, 98, 0 } | ||
47 | #define SH5_SCIF_IRQS {39, 40, 42, 0 } | ||
48 | #define SH7770_SCIF0_IRQS {61, 61, 61, 61 } | ||
49 | #define SH7770_SCIF1_IRQS {62, 62, 62, 62 } | ||
50 | #define SH7770_SCIF2_IRQS {63, 63, 63, 63 } | ||
51 | #define SH7780_SCIF0_IRQS {40, 41, 43, 42 } | ||
52 | #define SH7780_SCIF1_IRQS {76, 77, 79, 78 } | ||
53 | |||
54 | #if defined(CONFIG_CPU_SUBTYPE_SH7708) | 27 | #if defined(CONFIG_CPU_SUBTYPE_SH7708) |
55 | # define SCSPTR 0xffffff7c /* 8 bit */ | 28 | # define SCSPTR 0xffffff7c /* 8 bit */ |
56 | # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ | 29 | # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ |
57 | # define SCI_ONLY | 30 | # define SCI_ONLY |
58 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | 31 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \ |
32 | defined(CONFIG_CPU_SUBTYPE_SH7709) || \ | ||
33 | defined(CONFIG_CPU_SUBTYPE_SH7706) | ||
59 | # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ | 34 | # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ |
60 | # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ | 35 | # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ |
61 | # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ | 36 | # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ |
@@ -99,12 +74,23 @@ | |||
99 | # define SCPDR 0xA4050136 /* 16 bit SCIF */ | 74 | # define SCPDR 0xA4050136 /* 16 bit SCIF */ |
100 | # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ | 75 | # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ |
101 | # define SCIF_ONLY | 76 | # define SCIF_ONLY |
77 | #elif defined(CONFIG_CPU_SUBTYPE_SH7710) | ||
78 | # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ | ||
79 | # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ | ||
80 | # define SCIF_ONLY | ||
102 | #elif defined(CONFIG_CPU_SUBTYPE_SH73180) | 81 | #elif defined(CONFIG_CPU_SUBTYPE_SH73180) |
103 | # define SCPDR 0xA4050138 /* 16 bit SCIF */ | 82 | # define SCPDR 0xA4050138 /* 16 bit SCIF */ |
104 | # define SCSPTR2 SCPDR | 83 | # define SCSPTR2 SCPDR |
105 | # define SCIF_ORER 0x0001 /* overrun error bit */ | 84 | # define SCIF_ORER 0x0001 /* overrun error bit */ |
106 | # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */ | 85 | # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */ |
107 | # define SCIF_ONLY | 86 | # define SCIF_ONLY |
87 | #elif defined(CONFIG_CPU_SUBTYPE_SH7343) | ||
88 | # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ | ||
89 | # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ | ||
90 | # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ | ||
91 | # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ | ||
92 | # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ | ||
93 | # define SCIF_ONLY | ||
108 | #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) | 94 | #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) |
109 | # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ | 95 | # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ |
110 | # define SCIF_ORER 0x0001 /* overrun error bit */ | 96 | # define SCIF_ORER 0x0001 /* overrun error bit */ |
@@ -145,7 +131,7 @@ | |||
145 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) | 131 | #elif defined(CONFIG_CPU_SUBTYPE_SH7780) |
146 | # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ | 132 | # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ |
147 | # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ | 133 | # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ |
148 | # define SCIF_OPER 0x0001 /* Overrun error bit */ | 134 | # define SCIF_ORER 0x0001 /* Overrun error bit */ |
149 | # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ | 135 | # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ |
150 | # define SCIF_ONLY | 136 | # define SCIF_ONLY |
151 | #else | 137 | #else |
@@ -273,15 +259,6 @@ | |||
273 | */ | 259 | */ |
274 | #define SCI_EVENT_WRITE_WAKEUP 0 | 260 | #define SCI_EVENT_WRITE_WAKEUP 0 |
275 | 261 | ||
276 | struct sci_port { | ||
277 | struct uart_port port; | ||
278 | int type; | ||
279 | unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */ | ||
280 | void (*init_pins)(struct uart_port *port, unsigned int cflag); | ||
281 | int break_flag; | ||
282 | struct timer_list break_timer; | ||
283 | }; | ||
284 | |||
285 | #define SCI_IN(size, offset) \ | 262 | #define SCI_IN(size, offset) \ |
286 | unsigned int addr = port->mapbase + (offset); \ | 263 | unsigned int addr = port->mapbase + (offset); \ |
287 | if ((size) == 8) { \ | 264 | if ((size) == 8) { \ |
@@ -336,7 +313,9 @@ struct sci_port { | |||
336 | } | 313 | } |
337 | 314 | ||
338 | #ifdef CONFIG_CPU_SH3 | 315 | #ifdef CONFIG_CPU_SH3 |
339 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) | 316 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ |
317 | defined(CONFIG_CPU_SUBTYPE_SH7705) || \ | ||
318 | defined(CONFIG_CPU_SUBTYPE_SH7710) | ||
340 | #define SCIF_FNS(name, scif_offset, scif_size) \ | 319 | #define SCIF_FNS(name, scif_offset, scif_size) \ |
341 | CPU_SCIF_FNS(name, scif_offset, scif_size) | 320 | CPU_SCIF_FNS(name, scif_offset, scif_size) |
342 | #else | 321 | #else |
@@ -362,7 +341,9 @@ struct sci_port { | |||
362 | CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) | 341 | CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) |
363 | #endif | 342 | #endif |
364 | 343 | ||
365 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) | 344 | #if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ |
345 | defined(CONFIG_CPU_SUBTYPE_SH7705) || \ | ||
346 | defined(CONFIG_CPU_SUBTYPE_SH7710) | ||
366 | SCIF_FNS(SCSMR, 0x00, 16) | 347 | SCIF_FNS(SCSMR, 0x00, 16) |
367 | SCIF_FNS(SCBRR, 0x04, 8) | 348 | SCIF_FNS(SCBRR, 0x04, 8) |
368 | SCIF_FNS(SCSCR, 0x08, 16) | 349 | SCIF_FNS(SCSCR, 0x08, 16) |
@@ -447,7 +428,9 @@ static inline int sci_rxd_in(struct uart_port *port) | |||
447 | return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */ | 428 | return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */ |
448 | return 1; | 429 | return 1; |
449 | } | 430 | } |
450 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) | 431 | #elif defined(CONFIG_CPU_SUBTYPE_SH7707) || \ |
432 | defined(CONFIG_CPU_SUBTYPE_SH7709) || \ | ||
433 | defined(CONFIG_CPU_SUBTYPE_SH7706) | ||
451 | static inline int sci_rxd_in(struct uart_port *port) | 434 | static inline int sci_rxd_in(struct uart_port *port) |
452 | { | 435 | { |
453 | if (port->mapbase == 0xfffffe80) | 436 | if (port->mapbase == 0xfffffe80) |
@@ -467,6 +450,13 @@ static inline int sci_rxd_in(struct uart_port *port) | |||
467 | return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ | 450 | return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ |
468 | return 1; | 451 | return 1; |
469 | } | 452 | } |
453 | #elif defined(CONFIG_CPU_SUBTYPE_SH7710) | ||
454 | static inline int sci_rxd_in(struct uart_port *port) | ||
455 | { | ||
456 | if (port->mapbase == SCSPTR0) | ||
457 | return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0; | ||
458 | return 1; | ||
459 | } | ||
470 | #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ | 460 | #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ |
471 | defined(CONFIG_CPU_SUBTYPE_SH7751) || \ | 461 | defined(CONFIG_CPU_SUBTYPE_SH7751) || \ |
472 | defined(CONFIG_CPU_SUBTYPE_SH4_202) | 462 | defined(CONFIG_CPU_SUBTYPE_SH4_202) |
@@ -504,6 +494,19 @@ static inline int sci_rxd_in(struct uart_port *port) | |||
504 | { | 494 | { |
505 | return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ | 495 | return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ |
506 | } | 496 | } |
497 | #elif defined(CONFIG_CPU_SUBTYPE_SH7343) | ||
498 | static inline int sci_rxd_in(struct uart_port *port) | ||
499 | { | ||
500 | if (port->mapbase == 0xffe00000) | ||
501 | return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ | ||
502 | if (port->mapbase == 0xffe10000) | ||
503 | return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ | ||
504 | if (port->mapbase == 0xffe20000) | ||
505 | return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ | ||
506 | if (port->mapbase == 0xffe30000) | ||
507 | return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ | ||
508 | return 1; | ||
509 | } | ||
507 | #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) | 510 | #elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) |
508 | static inline int sci_rxd_in(struct uart_port *port) | 511 | static inline int sci_rxd_in(struct uart_port *port) |
509 | { | 512 | { |
@@ -587,4 +590,3 @@ static inline int sci_rxd_in(struct uart_port *port) | |||
587 | #else /* Generic SH */ | 590 | #else /* Generic SH */ |
588 | #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) | 591 | #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) |
589 | #endif | 592 | #endif |
590 | |||