[POWERPC] Split out CPU specific options into a new Kconfig file

A lot of the options in arch/powerpc/Kconfig deal with the CPU menu,
and my next patches add more to them.  Moving them to a new
arch/powerpc/platforms/Kconfig.cputype file makes it easier to
follow.

There are no functional changes in here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2 files changed, 253 insertions, 251 deletions

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5eaeafd30bdf..12830a77d163 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -4,12 +4,7 @@
 
 mainmenu "Linux/PowerPC Kernel Configuration"
 
-config PPC64
-        bool "64-bit kernel"
-        default n
-        help
-          This option selects whether a 32-bit or a 64-bit kernel
-          will be built.
+source "arch/powerpc/platforms/Kconfig.cputype"
 
 config PPC_PM_NEEDS_RTC_LIB
         bool
@@ -132,123 +127,6 @@ config PPC64_SWSUSP
         depends on PPC64 && (BROKEN || (PPC_PMAC64 && EXPERIMENTAL))
         default y
 
-menu "Processor support"
-choice
-        prompt "Processor Type"
-        depends on PPC32
-        default 6xx
-
-config CLASSIC32
-        bool "52xx/6xx/7xx/74xx"
-        select PPC_FPU
-        select 6xx
-        help
-          There are four families of PowerPC chips supported.  The more common
-          types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-          versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
-          embedded versions (403 and 405) and the high end 64 bit Power
-          processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
-
-          This option is the catch-all for 6xx types, including some of the
-          embedded versions.  Unless there is see an option for the specific
-          chip family you are using, you want this option.
-          
-          You do not want this if you are building a kernel for a 64 bit
-          IBM RS/6000 or an Apple G5, choose 6xx.
-          
-          If unsure, select this option
-          
-          Note that the kernel runs in 32-bit mode even on 64-bit chips.
-
-config PPC_82xx
-        bool "Freescale 82xx"
-        select 6xx
-        select PPC_FPU
-
-config PPC_83xx
-        bool "Freescale 83xx"
-        select 6xx
-        select FSL_SOC
-        select 83xx
-        select PPC_FPU
-        select WANT_DEVICE_TREE
-
-config PPC_85xx
-        bool "Freescale 85xx"
-        select E500
-        select FSL_SOC
-        select 85xx
-        select WANT_DEVICE_TREE
-
-config PPC_86xx
-        bool "Freescale 86xx"
-        select 6xx
-        select FSL_SOC
-        select FSL_PCIE
-        select PPC_FPU
-        select ALTIVEC
-        help
-          The Freescale E600 SoCs have 74xx cores.
-
-config PPC_8xx
-        bool "Freescale 8xx"
-        select FSL_SOC
-        select 8xx
-
-config 40x
-        bool "AMCC 40x"
-        select PPC_DCR_NATIVE
-
-config 44x
-        bool "AMCC 44x"
-        select PPC_DCR_NATIVE
-        select WANT_DEVICE_TREE
-
-config E200
-        bool "Freescale e200"
-
-endchoice
-
-config POWER4_ONLY
-        bool "Optimize for POWER4"
-        depends on PPC64
-        default n
-        ---help---
-          Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
-          The resulting binary will not work on POWER3 or RS64 processors
-          when compiled with binutils 2.15 or later.
-
-config POWER3
-        bool
-        depends on PPC64
-        default y if !POWER4_ONLY
-
-config POWER4
-        depends on PPC64
-        def_bool y
-
-config 6xx
-        bool
-
-# this is temp to handle compat with arch=ppc
-config 8xx
-        bool
-
-# this is temp to handle compat with arch=ppc
-config 83xx
-        bool
-
-# this is temp to handle compat with arch=ppc
-config 85xx
-        bool
-
-config E500
-        bool
-
-config PPC_FPU
-        bool
-        default y if PPC64
-
 config PPC_DCR_NATIVE
         bool
         default n
@@ -267,134 +145,6 @@ config PPC_OF_PLATFORM_PCI
         depends on PPC64 # not supported on 32 bits yet
         default n
 
-config 4xx
-        bool
-        depends on 40x || 44x
-        default y
-
-config BOOKE
-        bool
-        depends on E200 || E500 || 44x
-        default y
-
-config FSL_BOOKE
-        bool
-        depends on E200 || E500
-        default y
-
-config PTE_64BIT
-        bool
-        depends on 44x || E500
-        default y if 44x
-        default y if E500 && PHYS_64BIT
-
-config PHYS_64BIT
-        bool 'Large physical address support' if E500
-        depends on 44x || E500
-        select RESOURCES_64BIT
-        default y if 44x
-        ---help---
-          This option enables kernel support for larger than 32-bit physical
-          addresses.  This features is not be available on all e500 cores.
-
-          If in doubt, say N here.
-
-config ALTIVEC
-        bool "AltiVec Support"
-        depends on CLASSIC32 || POWER4
-        ---help---
-          This option enables kernel support for the Altivec extensions to the
-          PowerPC processor. The kernel currently supports saving and restoring
-          altivec registers, and turning on the 'altivec enable' bit so user
-          processes can execute altivec instructions.
-
-          This option is only usefully if you have a processor that supports
-          altivec (G4, otherwise known as 74xx series), but does not have
-          any affect on a non-altivec cpu (it does, however add code to the
-          kernel).
-
-          If in doubt, say Y here.
-
-config SPE
-        bool "SPE Support"
-        depends on E200 || E500
-        default y
-        ---help---
-          This option enables kernel support for the Signal Processing
-          Extensions (SPE) to the PowerPC processor. The kernel currently
-          supports saving and restoring SPE registers, and turning on the
-          'spe enable' bit so user processes can execute SPE instructions.
-
-          This option is only useful if you have a processor that supports
-          SPE (e500, otherwise known as 85xx series), but does not have any
-          effect on a non-spe cpu (it does, however add code to the kernel).
-
-          If in doubt, say Y here.
-
-config PPC_STD_MMU
-        bool
-        depends on 6xx || POWER3 || POWER4 || PPC64
-        default y
-
-config PPC_STD_MMU_32
-        def_bool y
-        depends on PPC_STD_MMU && PPC32
-
-config PPC_MM_SLICES
-        bool
-        default y if HUGETLB_PAGE
-        default n
-
-config VIRT_CPU_ACCOUNTING
-        bool "Deterministic task and CPU time accounting"
-        depends on PPC64
-        default y
-        help
-          Select this option to enable more accurate task and CPU time
-          accounting.  This is done by reading a CPU counter on each
-          kernel entry and exit and on transitions within the kernel
-          between system, softirq and hardirq state, so there is a
-          small performance impact.  This also enables accounting of
-          stolen time on logically-partitioned systems running on
-          IBM POWER5-based machines.
-
-          If in doubt, say Y here.
-
-config SMP
-        depends on PPC_STD_MMU
-        bool "Symmetric multi-processing support"
-        ---help---
-          This enables support for systems with more than one CPU. If you have
-          a system with only one CPU, say N. If you have a system with more
-          than one CPU, say Y.  Note that the kernel does not currently
-          support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
-          since they have inadequate hardware support for multiprocessor
-          operation.
-
-          If you say N here, the kernel will run on single and multiprocessor
-          machines, but will use only one CPU of a multiprocessor machine. If
-          you say Y here, the kernel will run on single-processor machines.
-          On a single-processor machine, the kernel will run faster if you say
-          N here.
-
-          If you don't know what to do here, say N.
-
-config NR_CPUS
-        int "Maximum number of CPUs (2-128)"
-        range 2 128
-        depends on SMP
-        default "32" if PPC64
-        default "4"
-
-config NOT_COHERENT_CACHE
-        bool
-        depends on 4xx || 8xx || E200
-        default y
-
-config CONFIG_CHECK_CACHE_COHERENCY
-        bool
-endmenu
-
 source "init/Kconfig"
 
 source "arch/powerpc/platforms/Kconfig"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
new file mode 100644
index 000000000000..597272ee9ddc
--- /dev/null
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -0,0 +1,252 @@
+config PPC64
+        bool "64-bit kernel"
+        default n
+        help
+          This option selects whether a 32-bit or a 64-bit kernel
+          will be built.
+
+menu "Processor support"
+choice
+        prompt "Processor Type"
+        depends on PPC32
+        default 6xx
+
+config CLASSIC32
+        bool "52xx/6xx/7xx/74xx"
+        select PPC_FPU
+        select 6xx
+        help
+          There are four families of PowerPC chips supported.  The more common
+          types (601, 603, 604, 740, 750, 7400), the Motorola embedded
+          versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
+          embedded versions (403 and 405) and the high end 64 bit Power
+          processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
+
+          This option is the catch-all for 6xx types, including some of the
+          embedded versions.  Unless there is see an option for the specific
+          chip family you are using, you want this option.
+
+          You do not want this if you are building a kernel for a 64 bit
+          IBM RS/6000 or an Apple G5, choose 6xx.
+
+          If unsure, select this option
+
+          Note that the kernel runs in 32-bit mode even on 64-bit chips.
+
+config PPC_82xx
+        bool "Freescale 82xx"
+        select 6xx
+        select PPC_FPU
+
+config PPC_83xx
+        bool "Freescale 83xx"
+        select 6xx
+        select FSL_SOC
+        select 83xx
+        select PPC_FPU
+        select WANT_DEVICE_TREE
+
+config PPC_85xx
+        bool "Freescale 85xx"
+        select E500
+        select FSL_SOC
+        select 85xx
+        select WANT_DEVICE_TREE
+
+config PPC_86xx
+        bool "Freescale 86xx"
+        select 6xx
+        select FSL_SOC
+        select FSL_PCIE
+        select PPC_FPU
+        select ALTIVEC
+        help
+          The Freescale E600 SoCs have 74xx cores.
+
+config PPC_8xx
+        bool "Freescale 8xx"
+        select FSL_SOC
+        select 8xx
+
+config 40x
+        bool "AMCC 40x"
+        select PPC_DCR_NATIVE
+
+config 44x
+        bool "AMCC 44x"
+        select PPC_DCR_NATIVE
+        select WANT_DEVICE_TREE
+
+config E200
+        bool "Freescale e200"
+
+endchoice
+
+config POWER4_ONLY
+        bool "Optimize for POWER4"
+        depends on PPC64
+        default n
+        ---help---
+          Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
+          The resulting binary will not work on POWER3 or RS64 processors
+          when compiled with binutils 2.15 or later.
+
+config POWER3
+        bool
+        depends on PPC64
+        default y if !POWER4_ONLY
+
+config POWER4
+        depends on PPC64
+        def_bool y
+
+config 6xx
+        bool
+
+# this is temp to handle compat with arch=ppc
+config 8xx
+        bool
+
+# this is temp to handle compat with arch=ppc
+config 83xx
+        bool
+
+# this is temp to handle compat with arch=ppc
+config 85xx
+        bool
+
+config E500
+        bool
+
+config PPC_FPU
+        bool
+        default y if PPC64
+
+config 4xx
+        bool
+        depends on 40x || 44x
+        default y
+
+config BOOKE
+        bool
+        depends on E200 || E500 || 44x
+        default y
+
+config FSL_BOOKE
+        bool
+        depends on E200 || E500
+        default y
+
+config PTE_64BIT
+        bool
+        depends on 44x || E500
+        default y if 44x
+        default y if E500 && PHYS_64BIT
+
+config PHYS_64BIT
+        bool 'Large physical address support' if E500
+        depends on 44x || E500
+        select RESOURCES_64BIT
+        default y if 44x
+        ---help---
+          This option enables kernel support for larger than 32-bit physical
+          addresses.  This features is not be available on all e500 cores.
+
+          If in doubt, say N here.
+
+config ALTIVEC
+        bool "AltiVec Support"
+        depends on CLASSIC32 || POWER4
+        ---help---
+          This option enables kernel support for the Altivec extensions to the
+          PowerPC processor. The kernel currently supports saving and restoring
+          altivec registers, and turning on the 'altivec enable' bit so user
+          processes can execute altivec instructions.
+
+          This option is only usefully if you have a processor that supports
+          altivec (G4, otherwise known as 74xx series), but does not have
+          any affect on a non-altivec cpu (it does, however add code to the
+          kernel).
+
+          If in doubt, say Y here.
+
+config SPE
+        bool "SPE Support"
+        depends on E200 || E500
+        default y
+        ---help---
+          This option enables kernel support for the Signal Processing
+          Extensions (SPE) to the PowerPC processor. The kernel currently
+          supports saving and restoring SPE registers, and turning on the
+          'spe enable' bit so user processes can execute SPE instructions.
+
+          This option is only useful if you have a processor that supports
+          SPE (e500, otherwise known as 85xx series), but does not have any
+          effect on a non-spe cpu (it does, however add code to the kernel).
+
+          If in doubt, say Y here.
+
+config PPC_STD_MMU
+        bool
+        depends on 6xx || POWER3 || POWER4 || PPC64
+        default y
+
+config PPC_STD_MMU_32
+        def_bool y
+        depends on PPC_STD_MMU && PPC32
+
+config PPC_MM_SLICES
+        bool
+        default y if HUGETLB_PAGE
+        default n
+
+config VIRT_CPU_ACCOUNTING
+        bool "Deterministic task and CPU time accounting"
+        depends on PPC64
+        default y
+        help
+          Select this option to enable more accurate task and CPU time
+          accounting.  This is done by reading a CPU counter on each
+          kernel entry and exit and on transitions within the kernel
+          between system, softirq and hardirq state, so there is a
+          small performance impact.  This also enables accounting of
+          stolen time on logically-partitioned systems running on
+          IBM POWER5-based machines.
+
+          If in doubt, say Y here.
+
+config SMP
+        depends on PPC_STD_MMU
+        bool "Symmetric multi-processing support"
+        ---help---
+          This enables support for systems with more than one CPU. If you have
+          a system with only one CPU, say N. If you have a system with more
+          than one CPU, say Y.  Note that the kernel does not currently
+          support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
+          since they have inadequate hardware support for multiprocessor
+          operation.
+
+          If you say N here, the kernel will run on single and multiprocessor
+          machines, but will use only one CPU of a multiprocessor machine. If
+          you say Y here, the kernel will run on single-processor machines.
+          On a single-processor machine, the kernel will run faster if you say
+          N here.
+
+          If you don't know what to do here, say N.
+
+config NR_CPUS
+        int "Maximum number of CPUs (2-128)"
+        range 2 128
+        depends on SMP
+        default "32" if PPC64
+        default "4"
+
+config NOT_COHERENT_CACHE
+        bool
+        depends on 4xx || 8xx || E200
+        default y
+
+config CONFIG_CHECK_CACHE_COHERENCY
+        bool
+
+endmenu