aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMarc St-Jean <stjeanma@pmc-sierra.com>2007-06-14 17:56:23 -0400
committerRalf Baechle <ralf@linux-mips.org>2007-07-10 12:33:03 -0400
commit6f95e60acf404e39d14030572c9033ddaca6f4de (patch)
tree49ea54ad6794b4879b6cb405c6daa5f0135ead5d
parent9267a30d1dc7dcd7cadb5eb6a5bbfed703feeefa (diff)
[MIPS] PMC MSP71xx PCI support
Patch to add PCI support for the PMC-Sierra MSP71xx devices. Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-rw-r--r--arch/mips/pci/Makefile3
-rw-r--r--arch/mips/pci/fixup-pmcmsp.c216
-rw-r--r--arch/mips/pci/ops-pmcmsp.c994
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_pci.c50
-rw-r--r--include/asm-mips/pmc-sierra/msp71xx/msp_pci.h205
5 files changed, 1468 insertions, 0 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 276a10b06bb5..c5845db55984 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -32,6 +32,9 @@ obj-$(CONFIG_LEMOTE_FULONG) += fixup-lm2e.o ops-bonito64.o
32obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o 32obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
33obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o 33obj-$(CONFIG_MOMENCO_OCELOT) += fixup-ocelot.o pci-ocelot.o
34obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o 34obj-$(CONFIG_MOMENCO_OCELOT_3) += fixup-ocelot3.o
35obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
36obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
37obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
35obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \ 38obj-$(CONFIG_PMC_YOSEMITE) += fixup-yosemite.o ops-titan.o ops-titan-ht.o \
36 pci-yosemite.o 39 pci-yosemite.o
37obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o 40obj-$(CONFIG_SGI_IP27) += ops-bridge.o pci-ip27.o
diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
new file mode 100644
index 000000000000..00261211dbfa
--- /dev/null
+++ b/arch/mips/pci/fixup-pmcmsp.c
@@ -0,0 +1,216 @@
1/*
2 * PMC-Sierra MSP board specific pci fixups.
3 *
4 * Copyright 2001 MontaVista Software Inc.
5 * Copyright 2005-2007 PMC-Sierra, Inc
6 *
7 * Author: MontaVista Software, Inc.
8 * ppopov@mvista.com or source@mvista.com
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
17 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
21 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
22 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 *
26 * You should have received a copy of the GNU General Public License along
27 * with this program; if not, write to the Free Software Foundation, Inc.,
28 * 675 Mass Ave, Cambridge, MA 02139, USA.
29 */
30
31#ifdef CONFIG_PCI
32
33#include <linux/types.h>
34#include <linux/pci.h>
35#include <linux/kernel.h>
36#include <linux/init.h>
37
38#include <asm/byteorder.h>
39
40#include <msp_pci.h>
41#include <msp_cic_int.h>
42
43/* PCI interrupt pins */
44#define IRQ4 MSP_INT_EXT4
45#define IRQ5 MSP_INT_EXT5
46#define IRQ6 MSP_INT_EXT6
47
48#if defined(CONFIG_PMC_MSP7120_GW)
49/* Garibaldi Board IRQ wiring to PCI slots */
50static char irq_tab[][5] __initdata = {
51 /* INTA INTB INTC INTD */
52 {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
53 {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
54 {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
55 {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
56 {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
57 {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
58 {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
59 {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
60 {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
61 {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
62 {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
63 {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
64 {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
65 {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
66 {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
67 {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
68 {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
69 {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
70 {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
71 {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
72 {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
73 {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
74 {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
75 {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
76 {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
77 {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
78 {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
79 {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
80 {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */
81 {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
82 {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */
83 {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */
84};
85
86#elif defined(CONFIG_PMC_MSP7120_EVAL)
87
88/* MSP7120 Eval Board IRQ wiring to PCI slots */
89static char irq_tab[][5] __initdata = {
90 /* INTA INTB INTC INTD */
91 {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
92 {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
93 {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
94 {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
95 {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
96 {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
97 {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
98 {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
99 {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
100 {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
101 {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
102 {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
103 {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
104 {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
105 {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
106 {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
107 {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */
108 {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */
109 {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */
110 {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */
111 {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
112 {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
113 {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
114 {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
115 {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
116 {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
117 {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
118 {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
119 {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
120 {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
121 {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
122 {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
123};
124
125#else
126
127/* Unknown board -- don't assign any IRQs */
128static char irq_tab[][5] __initdata = {
129 /* INTA INTB INTC INTD */
130 {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
131 {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
132 {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
133 {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
134 {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
135 {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
136 {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
137 {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
138 {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
139 {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
140 {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
141 {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
142 {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
143 {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
144 {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
145 {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
146 {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
147 {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
148 {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
149 {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
150 {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
151 {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
152 {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
153 {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
154 {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
155 {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
156 {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
157 {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
158 {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
159 {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
160 {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
161 {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
162};
163#endif
164
165/*****************************************************************************
166 *
167 * FUNCTION: pcibios_plat_dev_init
168 * _________________________________________________________________________
169 *
170 * DESCRIPTION: Perform platform specific device initialization at
171 * pci_enable_device() time.
172 * None are needed for the MSP7120 PCI Controller.
173 *
174 * INPUTS: dev - structure describing the PCI device
175 *
176 * OUTPUTS: none
177 *
178 * RETURNS: PCIBIOS_SUCCESSFUL
179 *
180 ****************************************************************************/
181int pcibios_plat_dev_init(struct pci_dev *dev)
182{
183 return PCIBIOS_SUCCESSFUL;
184}
185
186/*****************************************************************************
187 *
188 * FUNCTION: pcibios_map_irq
189 * _________________________________________________________________________
190 *
191 * DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
192 *
193 * INPUTS: dev - unused
194 * slot - PCI slot. Identified by which bit of the AD[] bus
195 * drives the IDSEL line. AD[10] is 0, AD[31] is
196 * slot 21.
197 * pin - numbered using the scheme of the PCI_INTERRUPT_PIN
198 * field of the config header.
199 *
200 * OUTPUTS: none
201 *
202 * RETURNS: IRQ number
203 *
204 ****************************************************************************/
205int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
206{
207#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
208 printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
209#endif
210 printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n",
211 irq_tab[slot][pin], slot, pin);
212
213 return irq_tab[slot][pin];
214}
215
216#endif /* CONFIG_PCI */
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
new file mode 100644
index 000000000000..09fa007c1d1b
--- /dev/null
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -0,0 +1,994 @@
1/*
2 * PMC-Sierra MSP board specific pci_ops
3 *
4 * Copyright 2001 MontaVista Software Inc.
5 * Copyright 2005-2007 PMC-Sierra, Inc
6 *
7 * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
8 *
9 * Much of the code is derived from the original DDB5074 port by
10 * Geert Uytterhoeven <geert@sonycom.com>
11 *
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License as published by the
14 * Free Software Foundation; either version 2 of the License, or (at your
15 * option) any later version.
16 *
17 */
18
19#define PCI_COUNTERS 1
20
21#include <linux/types.h>
22#include <linux/pci.h>
23#include <linux/interrupt.h>
24
25#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
26#include <linux/proc_fs.h>
27#include <linux/seq_file.h>
28#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
29
30#include <linux/kernel.h>
31#include <linux/init.h>
32
33#include <asm/byteorder.h>
34#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
35#include <asm/mipsmtregs.h>
36#endif
37
38#include <msp_prom.h>
39#include <msp_cic_int.h>
40#include <msp_pci.h>
41#include <msp_regs.h>
42#include <msp_regops.h>
43
44#define PCI_ACCESS_READ 0
45#define PCI_ACCESS_WRITE 1
46
47#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
48static char proc_init;
49extern struct proc_dir_entry *proc_bus_pci_dir;
50unsigned int pci_int_count[32];
51
52static void pci_proc_init(void);
53
54/*****************************************************************************
55 *
56 * FUNCTION: read_msp_pci_counts
57 * _________________________________________________________________________
58 *
59 * DESCRIPTION: Prints the count of how many times each PCI
60 * interrupt has asserted. Can be invoked by the
61 * /proc filesystem.
62 *
63 * INPUTS: page - part of STDOUT calculation
64 * off - part of STDOUT calculation
65 * count - part of STDOUT calculation
66 * data - unused
67 *
68 * OUTPUTS: start - new start location
69 * eof - end of file pointer
70 *
71 * RETURNS: len - STDOUT length
72 *
73 ****************************************************************************/
74static int read_msp_pci_counts(char *page, char **start, off_t off,
75 int count, int *eof, void *data)
76{
77 int i;
78 int len = 0;
79 unsigned int intcount, total = 0;
80
81 for (i = 0; i < 32; ++i) {
82 intcount = pci_int_count[i];
83 if (intcount != 0) {
84 len += sprintf(page + len, "[%d] = %u\n", i, intcount);
85 total += intcount;
86 }
87 }
88
89 len += sprintf(page + len, "total = %u\n", total);
90 if (len <= off+count)
91 *eof = 1;
92
93 *start = page + off;
94 len -= off;
95 if (len > count)
96 len = count;
97 if (len < 0)
98 len = 0;
99
100 return len;
101}
102
103/*****************************************************************************
104 *
105 * FUNCTION: gen_pci_cfg_wr
106 * _________________________________________________________________________
107 *
108 * DESCRIPTION: Generates a configuration write cycle for debug purposes.
109 * The IDSEL line asserted and location and data written are
110 * immaterial. Just want to be able to prove that a
111 * configuration write can be correctly generated on the
112 * PCI bus. Intent is that this function by invocable from
113 * the /proc filesystem.
114 *
115 * INPUTS: page - part of STDOUT calculation
116 * off - part of STDOUT calculation
117 * count - part of STDOUT calculation
118 * data - unused
119 *
120 * OUTPUTS: start - new start location
121 * eof - end of file pointer
122 *
123 * RETURNS: len - STDOUT length
124 *
125 ****************************************************************************/
126static int gen_pci_cfg_wr(char *page, char **start, off_t off,
127 int count, int *eof, void *data)
128{
129 unsigned char where = 0; /* Write to static Device/Vendor ID */
130 unsigned char bus_num = 0; /* Bus 0 */
131 unsigned char dev_fn = 0xF; /* Arbitrary device number */
132 u32 wr_data = 0xFF00AA00; /* Arbitrary data */
133 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
134 int len = 0;
135 unsigned long value;
136 int intr;
137
138 len += sprintf(page + len, "PMC MSP PCI: Beginning\n");
139
140 if (proc_init == 0) {
141 pci_proc_init();
142 proc_init = ~0;
143 }
144
145 len += sprintf(page + len, "PMC MSP PCI: Before Cfg Wr\n");
146
147 /*
148 * Generate PCI Configuration Write Cycle
149 */
150
151 /* Clear cause register bits */
152 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
153
154 /* Setup address that is to appear on PCI bus */
155 preg->config_addr = BPCI_CFGADDR_ENABLE |
156 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
157 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
158 (where & 0xFC);
159
160 value = cpu_to_le32(wr_data);
161
162 /* Launch the PCI configuration write cycle */
163 *PCI_CONFIG_SPACE_REG = value;
164
165 /*
166 * Check if the PCI configuration cycle (rd or wr) succeeded, by
167 * checking the status bits for errors like master or target abort.
168 */
169 intr = preg->if_status;
170
171 len += sprintf(page + len, "PMC MSP PCI: After Cfg Wr\n");
172
173 /* Handle STDOUT calculations */
174 if (len <= off+count)
175 *eof = 1;
176 *start = page + off;
177 len -= off;
178 if (len > count)
179 len = count;
180 if (len < 0)
181 len = 0;
182
183 return len;
184}
185
186/*****************************************************************************
187 *
188 * FUNCTION: pci_proc_init
189 * _________________________________________________________________________
190 *
191 * DESCRIPTION: Create entries in the /proc filesystem for debug access.
192 *
193 * INPUTS: none
194 *
195 * OUTPUTS: none
196 *
197 * RETURNS: none
198 *
199 ****************************************************************************/
200static void pci_proc_init(void)
201{
202 create_proc_read_entry("pmc_msp_pci_rd_cnt", 0, NULL,
203 read_msp_pci_counts, NULL);
204 create_proc_read_entry("pmc_msp_pci_cfg_wr", 0, NULL,
205 gen_pci_cfg_wr, NULL);
206}
207#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
208
209spinlock_t bpci_lock = SPIN_LOCK_UNLOCKED;
210
211/*****************************************************************************
212 *
213 * STRUCT: pci_io_resource
214 * _________________________________________________________________________
215 *
216 * DESCRIPTION: Defines the address range that pciauto() will use to
217 * assign to the I/O BARs of PCI devices.
218 *
219 * Use the start and end addresses of the MSP7120 PCI Host
220 * Controller I/O space, in the form that they appear on the
221 * PCI bus AFTER MSP7120 has performed address translation.
222 *
223 * For I/O accesses, MSP7120 ignores OATRAN and maps I/O
224 * accesses into the bottom 0xFFF region of address space,
225 * so that is the range to put into the pci_io_resource
226 * struct.
227 *
228 * In MSP4200, the start address was 0x04 instead of the
229 * expected 0x00. Will just assume there was a good reason
230 * for this!
231 *
232 * NOTES: Linux, by default, will assign I/O space to the lowest
233 * region of address space. Since MSP7120 and Linux,
234 * by default, have no offset in between how they map, the
235 * io_offset element of pci_controller struct should be set
236 * to zero.
237 * ELEMENTS:
238 * name - String used for a meaningful name.
239 *
240 * start - Start address of MSP7120's I/O space, as MSP7120 presents
241 * the address on the PCI bus.
242 *
243 * end - End address of MSP7120's I/O space, as MSP7120 presents
244 * the address on the PCI bus.
245 *
246 * flags - Attributes indicating the type of resource. In this case,
247 * indicate I/O space.
248 *
249 ****************************************************************************/
250static struct resource pci_io_resource = {
251 .name = "pci IO space",
252 .start = 0x04,
253 .end = 0x0FFF,
254 .flags = IORESOURCE_IO /* I/O space */
255};
256
257/*****************************************************************************
258 *
259 * STRUCT: pci_mem_resource
260 * _________________________________________________________________________
261 *
262 * DESCRIPTION: Defines the address range that pciauto() will use to
263 * assign to the memory BARs of PCI devices.
264 *
265 * The .start and .end values are dependent upon how address
266 * translation is performed by the OATRAN regiser.
267 *
268 * The values to use for .start and .end are the values
269 * in the form they appear on the PCI bus AFTER MSP7120 has
270 * performed OATRAN address translation.
271 *
272 * ELEMENTS:
273 * name - String used for a meaningful name.
274 *
275 * start - Start address of MSP7120's memory space, as MSP7120 presents
276 * the address on the PCI bus.
277 *
278 * end - End address of MSP7120's memory space, as MSP7120 presents
279 * the address on the PCI bus.
280 *
281 * flags - Attributes indicating the type of resource. In this case,
282 * indicate memory space.
283 *
284 ****************************************************************************/
285static struct resource pci_mem_resource = {
286 .name = "pci memory space",
287 .start = MSP_PCI_SPACE_BASE,
288 .end = MSP_PCI_SPACE_END,
289 .flags = IORESOURCE_MEM /* memory space */
290};
291
292/*****************************************************************************
293 *
294 * FUNCTION: bpci_interrupt
295 * _________________________________________________________________________
296 *
297 * DESCRIPTION: PCI status interrupt handler. Updates the count of how
298 * many times each status bit has been set, then clears
299 * the status bits. If the appropriate macros are defined,
300 * these counts can be viewed via the /proc filesystem.
301 *
302 * INPUTS: irq - unused
303 * dev_id - unused
304 * pt_regs - unused
305 *
306 * OUTPUTS: none
307 *
308 * RETURNS: PCIBIOS_SUCCESSFUL - success
309 *
310 ****************************************************************************/
311static int bpci_interrupt(int irq, void *dev_id)
312{
313 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
314 unsigned int stat = preg->if_status;
315
316#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
317 int i;
318 for (i = 0; i < 32; ++i) {
319 if ((1 << i) & stat)
320 ++pci_int_count[i];
321 }
322#endif /* PROC_FS && PCI_COUNTERS */
323
324 /* printk("PCI ISR: Status=%08X\n", stat); */
325
326 /* write to clear all asserted interrupts */
327 preg->if_status = stat;
328
329 return PCIBIOS_SUCCESSFUL;
330}
331
332/*****************************************************************************
333 *
334 * FUNCTION: msp_pcibios_config_access
335 * _________________________________________________________________________
336 *
337 * DESCRIPTION: Performs a PCI configuration access (rd or wr), then
338 * checks that the access succeeded by querying MSP7120's
339 * PCI status bits.
340 *
341 * INPUTS:
342 * access_type - kind of PCI configuration cycle to perform
343 * (read or write). Legal values are
344 * PCI_ACCESS_WRITE and PCI_ACCESS_READ.
345 *
346 * bus - pointer to the bus number of the device to
347 * be targetted for the configuration cycle.
348 * The only element of the pci_bus structure
349 * used is bus->number. This argument determines
350 * if the configuration access will be Type 0 or
351 * Type 1. Since MSP7120 assumes itself to be the
352 * PCI Host, any non-zero bus->number generates
353 * a Type 1 access.
354 *
355 * devfn - this is an 8-bit field. The lower three bits
356 * specify the function number of the device to
357 * be targetted for the configuration cycle, with
358 * all three-bit combinations being legal. The
359 * upper five bits specify the device number,
360 * with legal values being 10 to 31.
361 *
362 * where - address within the Configuration Header
363 * space to access.
364 *
365 * data - for write accesses, contains the data to
366 * write.
367 *
368 * OUTPUTS:
369 * data - for read accesses, contains the value read.
370 *
371 * RETURNS: PCIBIOS_SUCCESSFUL - success
372 * -1 - access failure
373 *
374 ****************************************************************************/
375int msp_pcibios_config_access(unsigned char access_type,
376 struct pci_bus *bus,
377 unsigned int devfn,
378 unsigned char where,
379 u32 *data)
380{
381 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
382 unsigned char bus_num = bus->number;
383 unsigned char dev_fn = (unsigned char)devfn;
384 unsigned long flags;
385 unsigned long intr;
386 unsigned long value;
387 static char pciirqflag;
388#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
389 unsigned int vpe_status;
390#endif
391
392#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
393 if (proc_init == 0) {
394 pci_proc_init();
395 proc_init = ~0;
396 }
397#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
398
399 /*
400 * Just the first time this function invokes, allocate
401 * an interrupt line for PCI host status interrupts. The
402 * allocation assigns an interrupt handler to the interrupt.
403 */
404 if (pciirqflag == 0) {
405 request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
406 bpci_interrupt,
407 SA_SHIRQ | SA_INTERRUPT,
408 "PMC MSP PCI Host",
409 preg);
410 pciirqflag = ~0;
411 }
412
413#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
414 local_irq_save(flags);
415 vpe_status = dvpe();
416#else
417 spin_lock_irqsave(&bpci_lock, flags);
418#endif
419
420 /*
421 * Clear PCI cause register bits.
422 *
423 * In Polo, the PCI Host had a dedicated DMA called the
424 * Block Copy (not to be confused with the general purpose Block
425 * Copy Engine block). There appear to have been special interrupts
426 * for this Block Copy, called Block Copy 0 Fault (BC0F) and
427 * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
428 * dedicated Block Copy block, so these two interrupts are now
429 * marked reserved. In case the Block Copy is resurrected in a
430 * future design, maintain the code that treats these two interrupts
431 * specially.
432 *
433 * Write to clear all interrupts in the PCI status register, aside
434 * from BC0F and BC1F.
435 */
436 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
437
438 /* Setup address that is to appear on PCI bus */
439 preg->config_addr = BPCI_CFGADDR_ENABLE |
440 (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
441 (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
442 (where & 0xFC);
443
444 /* IF access is a PCI configuration write */
445 if (access_type == PCI_ACCESS_WRITE) {
446 value = cpu_to_le32(*data);
447 *PCI_CONFIG_SPACE_REG = value;
448 } else {
449 /* ELSE access is a PCI configuration read */
450 value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
451 *data = value;
452 }
453
454 /*
455 * Check if the PCI configuration cycle (rd or wr) succeeded, by
456 * checking the status bits for errors like master or target abort.
457 */
458 intr = preg->if_status;
459
460 /* Clear config access */
461 preg->config_addr = 0;
462
463 /* IF error occurred */
464 if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
465 /* Clear status bits */
466 preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
467
468#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
469 evpe(vpe_status);
470 local_irq_restore(flags);
471#else
472 spin_unlock_irqrestore(&bpci_lock, flags);
473#endif
474
475 return -1;
476 }
477
478#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
479 evpe(vpe_status);
480 local_irq_restore(flags);
481#else
482 spin_unlock_irqrestore(&bpci_lock, flags);
483#endif
484
485 return PCIBIOS_SUCCESSFUL;
486}
487
488/*****************************************************************************
489 *
490 * FUNCTION: msp_pcibios_read_config_byte
491 * _________________________________________________________________________
492 *
493 * DESCRIPTION: Read a byte from PCI configuration address spac
494 * Since the hardware can't address 8 bit chunks
495 * directly, read a 32-bit chunk, then mask off extraneous
496 * bits.
497 *
498 * INPUTS bus - structure containing attributes for the PCI bus
499 * that the read is destined for.
500 * devfn - device/function combination that the read is
501 * destined for.
502 * where - register within the Configuration Header space
503 * to access.
504 *
505 * OUTPUTS val - read data
506 *
507 * RETURNS: PCIBIOS_SUCCESSFUL - success
508 * -1 - read access failure
509 *
510 ****************************************************************************/
511static int
512msp_pcibios_read_config_byte(struct pci_bus *bus,
513 unsigned int devfn,
514 int where,
515 u32 *val)
516{
517 u32 data = 0;
518
519 /*
520 * If the config access did not complete normally (e.g., underwent
521 * master abort) do the PCI compliant thing, which is to supply an
522 * all ones value.
523 */
524 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
525 where, &data)) {
526 *val = 0xFFFFFFFF;
527 return -1;
528 }
529
530 *val = (data >> ((where & 3) << 3)) & 0x0ff;
531
532 return PCIBIOS_SUCCESSFUL;
533}
534
535/*****************************************************************************
536 *
537 * FUNCTION: msp_pcibios_read_config_word
538 * _________________________________________________________________________
539 *
540 * DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
541 * Since the hardware can't address 16 bit chunks
542 * directly, read a 32-bit chunk, then mask off extraneous
543 * bits.
544 *
545 * INPUTS bus - structure containing attributes for the PCI bus
546 * that the read is destined for.
547 * devfn - device/function combination that the read is
548 * destined for.
549 * where - register within the Configuration Header space
550 * to access.
551 *
552 * OUTPUTS val - read data
553 *
554 * RETURNS: PCIBIOS_SUCCESSFUL - success
555 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
556 * -1 - read access failure
557 *
558 ****************************************************************************/
559static int
560msp_pcibios_read_config_word(struct pci_bus *bus,
561 unsigned int devfn,
562 int where,
563 u32 *val)
564{
565 u32 data = 0;
566
567 /* if (where & 1) */ /* Commented out non-compliant code.
568 * Should allow word access to configuration
569 * registers, with only exception being when
570 * the word access would wrap around into
571 * the next dword.
572 */
573 if ((where & 3) == 3) {
574 *val = 0xFFFFFFFF;
575 return PCIBIOS_BAD_REGISTER_NUMBER;
576 }
577
578 /*
579 * If the config access did not complete normally (e.g., underwent
580 * master abort) do the PCI compliant thing, which is to supply an
581 * all ones value.
582 */
583 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
584 where, &data)) {
585 *val = 0xFFFFFFFF;
586 return -1;
587 }
588
589 *val = (data >> ((where & 3) << 3)) & 0x0ffff;
590
591 return PCIBIOS_SUCCESSFUL;
592}
593
594/*****************************************************************************
595 *
596 * FUNCTION: msp_pcibios_read_config_dword
597 * _________________________________________________________________________
598 *
599 * DESCRIPTION: Read a double word (32 bits) from PCI configuration
600 * address space.
601 *
602 * INPUTS bus - structure containing attributes for the PCI bus
603 * that the read is destined for.
604 * devfn - device/function combination that the read is
605 * destined for.
606 * where - register within the Configuration Header space
607 * to access.
608 *
609 * OUTPUTS val - read data
610 *
611 * RETURNS: PCIBIOS_SUCCESSFUL - success
612 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
613 * -1 - read access failure
614 *
615 ****************************************************************************/
616static int
617msp_pcibios_read_config_dword(struct pci_bus *bus,
618 unsigned int devfn,
619 int where,
620 u32 *val)
621{
622 u32 data = 0;
623
624 /* Address must be dword aligned. */
625 if (where & 3) {
626 *val = 0xFFFFFFFF;
627 return PCIBIOS_BAD_REGISTER_NUMBER;
628 }
629
630 /*
631 * If the config access did not complete normally (e.g., underwent
632 * master abort) do the PCI compliant thing, which is to supply an
633 * all ones value.
634 */
635 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
636 where, &data)) {
637 *val = 0xFFFFFFFF;
638 return -1;
639 }
640
641 *val = data;
642
643 return PCIBIOS_SUCCESSFUL;
644}
645
646/*****************************************************************************
647 *
648 * FUNCTION: msp_pcibios_write_config_byte
649 * _________________________________________________________________________
650 *
651 * DESCRIPTION: Write a byte to PCI configuration address space.
652 * Since the hardware can't address 8 bit chunks
653 * directly, a read-modify-write is performed.
654 *
655 * INPUTS bus - structure containing attributes for the PCI bus
656 * that the write is destined for.
657 * devfn - device/function combination that the write is
658 * destined for.
659 * where - register within the Configuration Header space
660 * to access.
661 * val - value to write
662 *
663 * OUTPUTS none
664 *
665 * RETURNS: PCIBIOS_SUCCESSFUL - success
666 * -1 - write access failure
667 *
668 ****************************************************************************/
669static int
670msp_pcibios_write_config_byte(struct pci_bus *bus,
671 unsigned int devfn,
672 int where,
673 u8 val)
674{
675 u32 data = 0;
676
677 /* read config space */
678 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
679 where, &data))
680 return -1;
681
682 /* modify the byte within the dword */
683 data = (data & ~(0xff << ((where & 3) << 3))) |
684 (val << ((where & 3) << 3));
685
686 /* write back the full dword */
687 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
688 where, &data))
689 return -1;
690
691 return PCIBIOS_SUCCESSFUL;
692}
693
694/*****************************************************************************
695 *
696 * FUNCTION: msp_pcibios_write_config_word
697 * _________________________________________________________________________
698 *
699 * DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
700 * Since the hardware can't address 16 bit chunks
701 * directly, a read-modify-write is performed.
702 *
703 * INPUTS bus - structure containing attributes for the PCI bus
704 * that the write is destined for.
705 * devfn - device/function combination that the write is
706 * destined for.
707 * where - register within the Configuration Header space
708 * to access.
709 * val - value to write
710 *
711 * OUTPUTS none
712 *
713 * RETURNS: PCIBIOS_SUCCESSFUL - success
714 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
715 * -1 - write access failure
716 *
717 ****************************************************************************/
718static int
719msp_pcibios_write_config_word(struct pci_bus *bus,
720 unsigned int devfn,
721 int where,
722 u16 val)
723{
724 u32 data = 0;
725
726 /* Fixed non-compliance: if (where & 1) */
727 if ((where & 3) == 3)
728 return PCIBIOS_BAD_REGISTER_NUMBER;
729
730 /* read config space */
731 if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
732 where, &data))
733 return -1;
734
735 /* modify the word within the dword */
736 data = (data & ~(0xffff << ((where & 3) << 3))) |
737 (val << ((where & 3) << 3));
738
739 /* write back the full dword */
740 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
741 where, &data))
742 return -1;
743
744 return PCIBIOS_SUCCESSFUL;
745}
746
747/*****************************************************************************
748 *
749 * FUNCTION: msp_pcibios_write_config_dword
750 * _________________________________________________________________________
751 *
752 * DESCRIPTION: Write a double word (32-bits) to PCI configuration address
753 * space.
754 *
755 * INPUTS bus - structure containing attributes for the PCI bus
756 * that the write is destined for.
757 * devfn - device/function combination that the write is
758 * destined for.
759 * where - register within the Configuration Header space
760 * to access.
761 * val - value to write
762 *
763 * OUTPUTS none
764 *
765 * RETURNS: PCIBIOS_SUCCESSFUL - success
766 * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
767 * -1 - write access failure
768 *
769 ****************************************************************************/
770static int
771msp_pcibios_write_config_dword(struct pci_bus *bus,
772 unsigned int devfn,
773 int where,
774 u32 val)
775{
776 /* check that address is dword aligned */
777 if (where & 3)
778 return PCIBIOS_BAD_REGISTER_NUMBER;
779
780 /* perform write */
781 if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
782 where, &val))
783 return -1;
784
785 return PCIBIOS_SUCCESSFUL;
786}
787
788/*****************************************************************************
789 *
790 * FUNCTION: msp_pcibios_read_config
791 * _________________________________________________________________________
792 *
793 * DESCRIPTION: Interface the PCI configuration read request with
794 * the appropriate function, based on how many bytes
795 * the read request is.
796 *
797 * INPUTS bus - structure containing attributes for the PCI bus
798 * that the write is destined for.
799 * devfn - device/function combination that the write is
800 * destined for.
801 * where - register within the Configuration Header space
802 * to access.
803 * size - in units of bytes, should be 1, 2, or 4.
804 *
805 * OUTPUTS val - value read, with any extraneous bytes masked
806 * to zero.
807 *
808 * RETURNS: PCIBIOS_SUCCESSFUL - success
809 * -1 - failure
810 *
811 ****************************************************************************/
812int
813msp_pcibios_read_config(struct pci_bus *bus,
814 unsigned int devfn,
815 int where,
816 int size,
817 u32 *val)
818{
819 if (size == 1) {
820 if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
821 return -1;
822 }
823 } else if (size == 2) {
824 if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
825 return -1;
826 }
827 } else if (size == 4) {
828 if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
829 return -1;
830 }
831 } else {
832 *val = 0xFFFFFFFF;
833 return -1;
834 }
835
836 return PCIBIOS_SUCCESSFUL;
837}
838
839/*****************************************************************************
840 *
841 * FUNCTION: msp_pcibios_write_config
842 * _________________________________________________________________________
843 *
844 * DESCRIPTION: Interface the PCI configuration write request with
845 * the appropriate function, based on how many bytes
846 * the read request is.
847 *
848 * INPUTS bus - structure containing attributes for the PCI bus
849 * that the write is destined for.
850 * devfn - device/function combination that the write is
851 * destined for.
852 * where - register within the Configuration Header space
853 * to access.
854 * size - in units of bytes, should be 1, 2, or 4.
855 * val - value to write
856 *
857 * OUTPUTS: none
858 *
859 * RETURNS: PCIBIOS_SUCCESSFUL - success
860 * -1 - failure
861 *
862 ****************************************************************************/
863int
864msp_pcibios_write_config(struct pci_bus *bus,
865 unsigned int devfn,
866 int where,
867 int size,
868 u32 val)
869{
870 if (size == 1) {
871 if (msp_pcibios_write_config_byte(bus, devfn,
872 where, (u8)(0xFF & val))) {
873 return -1;
874 }
875 } else if (size == 2) {
876 if (msp_pcibios_write_config_word(bus, devfn,
877 where, (u16)(0xFFFF & val))) {
878 return -1;
879 }
880 } else if (size == 4) {
881 if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
882 return -1;
883 }
884 } else {
885 return -1;
886 }
887
888 return PCIBIOS_SUCCESSFUL;
889}
890
891/*****************************************************************************
892 *
893 * STRUCTURE: msp_pci_ops
894 * _________________________________________________________________________
895 *
896 * DESCRIPTION: structure to abstract the hardware specific PCI
897 * configuration accesses.
898 *
899 * ELEMENTS:
900 * read - function for Linux to generate PCI Configuration reads.
901 * write - function for Linux to generate PCI Configuration writes.
902 *
903 ****************************************************************************/
904struct pci_ops msp_pci_ops = {
905 .read = msp_pcibios_read_config,
906 .write = msp_pcibios_write_config
907};
908
909/*****************************************************************************
910 *
911 * STRUCTURE: msp_pci_controller
912 * _________________________________________________________________________
913 *
914 * Describes the attributes of the MSP7120 PCI Host Controller
915 *
916 * ELEMENTS:
917 * pci_ops - abstracts the hardware specific PCI configuration
918 * accesses.
919 *
920 * mem_resource - address range pciauto() uses to assign to PCI device
921 * memory BARs.
922 *
923 * mem_offset - offset between how MSP7120 outbound PCI memory
924 * transaction addresses appear on the PCI bus and how Linux
925 * wants to configure memory BARs of the PCI devices.
926 * MSP7120 does nothing funky, so just set to zero.
927 *
928 * io_resource - address range pciauto() uses to assign to PCI device
929 * I/O BARs.
930 *
931 * io_offset - offset between how MSP7120 outbound PCI I/O
932 * transaction addresses appear on the PCI bus and how
933 * Linux defaults to configure I/O BARs of the PCI devices.
934 * MSP7120 maps outbound I/O accesses into the bottom
935 * bottom 4K of PCI address space (and ignores OATRAN).
936 * Since the Linux default is to configure I/O BARs to the
937 * bottom 4K, no special offset is needed. Just set to zero.
938 *
939 ****************************************************************************/
940static struct pci_controller msp_pci_controller = {
941 .pci_ops = &msp_pci_ops,
942 .mem_resource = &pci_mem_resource,
943 .mem_offset = 0,
944 .io_resource = &pci_io_resource,
945 .io_offset = 0
946};
947
948/*****************************************************************************
949 *
950 * FUNCTION: msp_pci_init
951 * _________________________________________________________________________
952 *
953 * DESCRIPTION: Initialize the PCI Host Controller and register it with
954 * Linux so Linux can seize control of the PCI bus.
955 *
956 ****************************************************************************/
957void __init msp_pci_init(void)
958{
959 struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
960 u32 id;
961
962 /* Extract Device ID */
963 id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
964
965 /* Check if JTAG ID identifies MSP7120 */
966 if (!MSP_HAS_PCI(id)) {
967 printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
968 goto no_pci;
969 }
970
971 /*
972 * Enable flushing of the PCI-SDRAM queue upon a read
973 * of the SDRAM's Memory Configuration Register.
974 */
975 *(unsigned long *)QFLUSH_REG_1 = 3;
976
977 /* Configure PCI Host Controller. */
978 preg->if_status = ~0; /* Clear cause register bits */
979 preg->config_addr = 0; /* Clear config access */
980 preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
981 preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
982
983 /* configure so inb(), outb(), and family are functional */
984 set_io_port_base(MSP_PCI_IOSPACE_BASE);
985
986 /* Tell Linux the details of the MSP7120 PCI Host Controller */
987 register_pci_controller(&msp_pci_controller);
988
989 return;
990
991no_pci:
992 /* Disable PCI channel */
993 printk(KERN_WARNING "PCI: no host PCI bus detected\n");
994}
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_pci.c b/arch/mips/pmc-sierra/msp71xx/msp_pci.c
new file mode 100644
index 000000000000..f764fe7748d6
--- /dev/null
+++ b/arch/mips/pmc-sierra/msp71xx/msp_pci.c
@@ -0,0 +1,50 @@
1/*
2 * The setup file for PCI related hardware on PMC-Sierra MSP processors.
3 *
4 * Copyright 2005-2006 PMC-Sierra, Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 *
11 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
12 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
13 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
14 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
15 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
16 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
17 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
18 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
19 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
20 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
21 *
22 * You should have received a copy of the GNU General Public License along
23 * with this program; if not, write to the Free Software Foundation, Inc.,
24 * 675 Mass Ave, Cambridge, MA 02139, USA.
25 */
26
27#include <linux/init.h>
28
29#include <msp_prom.h>
30#include <msp_regs.h>
31
32extern void msp_pci_init(void);
33
34static int __init msp_pci_setup(void)
35{
36#if 0 /* Linux 2.6 initialization code to be completed */
37 if (getdeviceid() & DEV_ID_SINGLE_PC) {
38 /* If single card mode */
39 slmRegs *sreg = (slmRegs *) SREG_BASE;
40
41 sreg->single_pc_enable = SINGLE_PCCARD;
42 }
43#endif
44
45 msp_pci_init();
46
47 return 0;
48}
49
50subsys_initcall(msp_pci_setup);
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
new file mode 100644
index 000000000000..415606903617
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_pci.h
@@ -0,0 +1,205 @@
1/*
2 * Copyright (c) 2000-2006 PMC-Sierra INC.
3 *
4 * This program is free software; you can redistribute it
5 * and/or modify it under the terms of the GNU General
6 * Public License as published by the Free Software
7 * Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be
11 * useful, but WITHOUT ANY WARRANTY; without even the implied
12 * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
13 * PURPOSE. See the GNU General Public License for more
14 * details.
15 *
16 * You should have received a copy of the GNU General Public
17 * License along with this program; if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
19 * 02139, USA.
20 *
21 * PMC-SIERRA INC. DISCLAIMS ANY LIABILITY OF ANY KIND
22 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS
23 * SOFTWARE.
24 */
25
26#ifndef _MSP_PCI_H_
27#define _MSP_PCI_H_
28
29#define MSP_HAS_PCI(ID) (((u32)(ID) <= 0x4236) && ((u32)(ID) >= 0x4220))
30
31/*
32 * It is convenient to program the OATRAN register so that
33 * Athena virtual address space and PCI address space are
34 * the same. This is not a requirement, just a convenience.
35 *
36 * The only hard restrictions on the value of OATRAN is that
37 * OATRAN must not be programmed to allow translated memory
38 * addresses to fall within the lowest 512MB of
39 * PCI address space. This region is hardcoded
40 * for use as Athena PCI Host Controller target
41 * access memory space to the Athena's SDRAM.
42 *
43 * Note that OATRAN applies only to memory accesses, not
44 * to I/O accesses.
45 *
46 * To program OATRAN to make Athena virtual address space
47 * and PCI address space have the same values, OATRAN
48 * is to be programmed to 0xB8000000. The top seven
49 * bits of the value mimic the seven bits clipped off
50 * by the PCI Host controller.
51 *
52 * With OATRAN at the said value, when the CPU does
53 * an access to its virtual address at, say 0xB900_5000,
54 * the address appearing on the PCI bus will be
55 * 0xB900_5000.
56 * - Michael Penner
57 */
58#define MSP_PCI_OATRAN 0xB8000000UL
59
60#define MSP_PCI_SPACE_BASE (MSP_PCI_OATRAN + 0x1002000UL)
61#define MSP_PCI_SPACE_SIZE (0x3000000UL - 0x2000)
62#define MSP_PCI_SPACE_END \
63 (MSP_PCI_SPACE_BASE + MSP_PCI_SPACE_SIZE - 1)
64#define MSP_PCI_IOSPACE_BASE (MSP_PCI_OATRAN + 0x1001000UL)
65#define MSP_PCI_IOSPACE_SIZE 0x1000
66#define MSP_PCI_IOSPACE_END \
67 (MSP_PCI_IOSPACE_BASE + MSP_PCI_IOSPACE_SIZE - 1)
68
69/* IRQ for PCI status interrupts */
70#define PCI_STAT_IRQ 20
71
72#define QFLUSH_REG_1 0xB7F40000
73
74typedef volatile unsigned int pcireg;
75typedef void * volatile ppcireg;
76
77struct pci_block_copy
78{
79 pcireg unused1; /* +0x00 */
80 pcireg unused2; /* +0x04 */
81 ppcireg unused3; /* +0x08 */
82 ppcireg unused4; /* +0x0C */
83 pcireg unused5; /* +0x10 */
84 pcireg unused6; /* +0x14 */
85 pcireg unused7; /* +0x18 */
86 ppcireg unused8; /* +0x1C */
87 ppcireg unused9; /* +0x20 */
88 pcireg unusedA; /* +0x24 */
89 ppcireg unusedB; /* +0x28 */
90 ppcireg unusedC; /* +0x2C */
91};
92
93enum
94{
95 config_device_vendor, /* 0 */
96 config_status_command, /* 1 */
97 config_class_revision, /* 2 */
98 config_BIST_header_latency_cache, /* 3 */
99 config_BAR0, /* 4 */
100 config_BAR1, /* 5 */
101 config_BAR2, /* 6 */
102 config_not_used7, /* 7 */
103 config_not_used8, /* 8 */
104 config_not_used9, /* 9 */
105 config_CIS, /* 10 */
106 config_subsystem, /* 11 */
107 config_not_used12, /* 12 */
108 config_capabilities, /* 13 */
109 config_not_used14, /* 14 */
110 config_lat_grant_irq, /* 15 */
111 config_message_control,/* 16 */
112 config_message_addr, /* 17 */
113 config_message_data, /* 18 */
114 config_VPD_addr, /* 19 */
115 config_VPD_data, /* 20 */
116 config_maxregs /* 21 - number of registers */
117};
118
119struct msp_pci_regs
120{
121 pcireg hop_unused_00; /* +0x00 */
122 pcireg hop_unused_04; /* +0x04 */
123 pcireg hop_unused_08; /* +0x08 */
124 pcireg hop_unused_0C; /* +0x0C */
125 pcireg hop_unused_10; /* +0x10 */
126 pcireg hop_unused_14; /* +0x14 */
127 pcireg hop_unused_18; /* +0x18 */
128 pcireg hop_unused_1C; /* +0x1C */
129 pcireg hop_unused_20; /* +0x20 */
130 pcireg hop_unused_24; /* +0x24 */
131 pcireg hop_unused_28; /* +0x28 */
132 pcireg hop_unused_2C; /* +0x2C */
133 pcireg hop_unused_30; /* +0x30 */
134 pcireg hop_unused_34; /* +0x34 */
135 pcireg if_control; /* +0x38 */
136 pcireg oatran; /* +0x3C */
137 pcireg reset_ctl; /* +0x40 */
138 pcireg config_addr; /* +0x44 */
139 pcireg hop_unused_48; /* +0x48 */
140 pcireg msg_signaled_int_status; /* +0x4C */
141 pcireg msg_signaled_int_mask; /* +0x50 */
142 pcireg if_status; /* +0x54 */
143 pcireg if_mask; /* +0x58 */
144 pcireg hop_unused_5C; /* +0x5C */
145 pcireg hop_unused_60; /* +0x60 */
146 pcireg hop_unused_64; /* +0x64 */
147 pcireg hop_unused_68; /* +0x68 */
148 pcireg hop_unused_6C; /* +0x6C */
149 pcireg hop_unused_70; /* +0x70 */
150
151 struct pci_block_copy pci_bc[2] __attribute__((aligned(64)));
152
153 pcireg error_hdr1; /* +0xE0 */
154 pcireg error_hdr2; /* +0xE4 */
155
156 pcireg config[config_maxregs] __attribute__((aligned(256)));
157
158};
159
160#define BPCI_CFGADDR_BUSNUM_SHF 16
161#define BPCI_CFGADDR_FUNCTNUM_SHF 8
162#define BPCI_CFGADDR_REGNUM_SHF 2
163#define BPCI_CFGADDR_ENABLE (1<<31)
164
165#define BPCI_IFCONTROL_RTO (1<<20) /* Retry timeout */
166#define BPCI_IFCONTROL_HCE (1<<16) /* Host configuration enable */
167#define BPCI_IFCONTROL_CTO_SHF 12 /* Shift count for CTO bits */
168#define BPCI_IFCONTROL_SE (1<<5) /* Enable exceptions on errors */
169#define BPCI_IFCONTROL_BIST (1<<4) /* Use BIST in per. mode */
170#define BPCI_IFCONTROL_CAP (1<<3) /* Enable capabilities */
171#define BPCI_IFCONTROL_MMC_SHF 0 /* Shift count for MMC bits */
172
173#define BPCI_IFSTATUS_MGT (1<<8) /* Master Grant timeout */
174#define BPCI_IFSTATUS_MTT (1<<9) /* Master TRDY timeout */
175#define BPCI_IFSTATUS_MRT (1<<10) /* Master retry timeout */
176#define BPCI_IFSTATUS_BC0F (1<<13) /* Block copy 0 fault */
177#define BPCI_IFSTATUS_BC1F (1<<14) /* Block copy 1 fault */
178#define BPCI_IFSTATUS_PCIU (1<<15) /* PCI unable to respond */
179#define BPCI_IFSTATUS_BSIZ (1<<16) /* PCI access with illegal size */
180#define BPCI_IFSTATUS_BADD (1<<17) /* PCI access with illegal addr */
181#define BPCI_IFSTATUS_RTO (1<<18) /* Retry time out */
182#define BPCI_IFSTATUS_SER (1<<19) /* System error */
183#define BPCI_IFSTATUS_PER (1<<20) /* Parity error */
184#define BPCI_IFSTATUS_LCA (1<<21) /* Local CPU abort */
185#define BPCI_IFSTATUS_MEM (1<<22) /* Memory prot. violation */
186#define BPCI_IFSTATUS_ARB (1<<23) /* Arbiter timed out */
187#define BPCI_IFSTATUS_STA (1<<27) /* Signaled target abort */
188#define BPCI_IFSTATUS_TA (1<<28) /* Target abort */
189#define BPCI_IFSTATUS_MA (1<<29) /* Master abort */
190#define BPCI_IFSTATUS_PEI (1<<30) /* Parity error as initiator */
191#define BPCI_IFSTATUS_PET (1<<31) /* Parity error as target */
192
193#define BPCI_RESETCTL_PR (1<<0) /* True if reset asserted */
194#define BPCI_RESETCTL_RT (1<<4) /* Release time */
195#define BPCI_RESETCTL_CT (1<<8) /* Config time */
196#define BPCI_RESETCTL_PE (1<<12) /* PCI enabled */
197#define BPCI_RESETCTL_HM (1<<13) /* PCI host mode */
198#define BPCI_RESETCTL_RI (1<<14) /* PCI reset in */
199
200extern struct msp_pci_regs msp_pci_regs
201 __attribute__((section(".register")));
202extern unsigned long msp_pci_config_space
203 __attribute__((section(".register")));
204
205#endif /* !_MSP_PCI_H_ */